# PXI-2022

# 16-CH 16-Bit 250 KS/s Simultaneous Sampling DAQ Cards

# Features

• Supports 3.3 V and 5 V PCI signaling
• PXI specification Rev 2.2 compliant
• 16-CH differential analog inputs
• Bipolar analog input
• Programmable gains of x1, x4
• Scatter gather DMA transfer for AI continuously data acquisition
• 4-CH TTL digital input/output
• 3U EuroCard form factor
• 2-CH 32-Bit general purpose timer/counters
• Digital triggering
• Fully auto calibration
• Multiple cards synchronization through PXI trigger bus
• Onboard 8 K-sample (16 KB) memory for data storage
• Supported Operating System
• Windows 7/8/10/11 x64/x86, Linux
• Driver and SDK
• LabVIEW, MATLAB, C/C++, Visual Basic, Visual Studio.NET
• Software Utility
• AD-Logger

# Ordering Information

• PXI-2022 16-CH 16-Bit 250 KS/s Simultaneous Sampling Card

# Terminal Boards & Cables

• DIN-68S-01
68-pin SCSI-II Termination board with DIN-Rail Mounting (Cables are not included.)
• ACL-10568-1
SCSI 68P(M) to VHDCI 68P cable, 1M

![Electronic circuit board with multiple components and connectors (no visible text or symbols)](.20240409-pxi-2022/9ee7430bdd5b80f8657d9284038b2c912ec77cc1c6675753766aa5deb483cece.jpg)

# Accessories

• SMB-SMB-1M
RF Cable, SMB(F) to SMB(F), 1M
SMB-BNC-1M
RF Cable, BNC(M) to SMB(F), 1M

Specifications

<table><tr><td>Model Name</td><td>PXI-2022</td></tr><tr><td colspan="2">Analog Input</td></tr><tr><td>Resolution</td><td>16 Bit</td></tr><tr><td>Number of Channels</td><td>16 differential channels</td></tr><tr><td>Input Impedance</td><td>1 GΩ/pF</td></tr><tr><td>Input Coupling</td><td>DC</td></tr><tr><td>Bipolar Input Signal Range</td><td>±10 V, ±2.5 V</td></tr><tr><td>Programmable gain</td><td>1, 4</td></tr><tr><td>Overvoltage Protection</td><td>Power on: ±30 V continuousPower off: ±30 V continuous</td></tr><tr><td>Max Sampling Rate</td><td>250 KS/s</td></tr><tr><td>Data FIFO Size</td><td>8 K-sample (16 KB)</td></tr><tr><td>DNL (gain =1)</td><td>±0.8 LSB</td></tr><tr><td>INL (gain =1)</td><td>±1.5 LSB (typical), ±3.0 LSB (MAX)</td></tr><tr><td>Offset Error (gain =1)</td><td>0.6 mV (typical)</td></tr><tr><td>Gain Error (gain =1)</td><td>0.05% of input</td></tr><tr><td>Data Transfer</td><td>16 differential channels</td></tr><tr><td colspan="2">Digital I/O</td></tr><tr><td>Number of Channel</td><td>4 input/output</td></tr><tr><td>Compatibility</td><td>TTL / CMOS</td></tr><tr><td>Input Logic Levels</td><td>Input low voltage: 0.8 V (max)Input high voltage: 2.0 V (min)</td></tr><tr><td>Output Logic Levels</td><td>Output low voltage: 0.4 V (max)Output high voltage: 2.8 V (min)</td></tr><tr><td>Output Driving Capacity</td><td>±24 mA</td></tr><tr><td>Power-on State</td><td>Input, pull-low with 10 KΩ resistor</td></tr><tr><td>Data Transfer</td><td>Polling mode</td></tr><tr><td colspan="2">General Specifications</td></tr><tr><td>Auto Calibration</td><td>Yes (+5 V, ±3 ppm/°C)</td></tr><tr><td>Dimensions</td><td>Single 3U PXI module, 100 mm x 160 mm (not including connector)</td></tr><tr><td>Connector</td><td>ACL-10568-1, 68-pin VHDCI-type female</td></tr><tr><td>Operating Environment</td><td>Ambient temperature: 0°C to 55°C (32°F to 131°F)Relative humidity: 10% to 90% non-condensing</td></tr><tr><td>Storage Environment</td><td>Ambient temperature: -20°C to 80°C (-4°F to 176°F)Relative humidity: 5% to 95% non-condensing</td></tr></table>
[🔗 Link to the original document](.20240409-pxi-2022/20240409-pxi-2022.pdf)