![Close-up of a green printed circuit board with various electronic components and connectors (no readable text or symbols)](.etx-glx-datasheet-19/9fa26b457756860c99cc60efadaf863f943953305e16fc51bc0703001fdfb7f7.jpg)

# Features

Low power AMD Geode™ LX 800
Display support for VGA, TFT LVDS, and TV-out
USB 2.0, Serial ATA and IDE support
Optional 128/256 MB DDR soldered onboard
Serial Console, EEPROM CMOS backup, USB boot legacy

# Specifications

Core System

<table><tr><td>CPU</td><td>AMD GeodeTM LX 800 CPU 500 MHz</td></tr><tr><td rowspan="3">Memory</td><td>Single SODIMM socket for up to 512 MB DDR at 333/400 MHz</td></tr><tr><td>Optional 128/256 MB DDR at 333/400 MHz soldered on module</td></tr><tr><td>Total memory support 768 MB</td></tr><tr><td>Chipset</td><td>AMD GeodeTM CS5536 companion device</td></tr><tr><td>BIOS</td><td>Phoenix® AWARD 2 Mb Flash BIOS with ACPI and APM 1.2 power management with console redirection and CMOS backup in onboard EEPROM</td></tr><tr><td>Hardware Monitor</td><td>Supply voltages and CPU temperature</td></tr><tr><td>Watchdog Timer</td><td>255-level timer generates system reset</td></tr><tr><td>Expansion Busses</td><td>16-bit ISA and 32-bit PCI rev. 2.2</td></tr></table>

Video

<table><tr><td>Chipset</td><td>Integrated on AMD GeodeTM LX</td></tr><tr><td>CRT Interface</td><td>Analog VGA support up to QXGA 1920 x 1440 resolution</td></tr><tr><td>LVDS Interface</td><td>24-bit TFT supports resolutions up to 1280 x 1024 x 24-bit at 60 Hz</td></tr><tr><td>TV-out (optional)</td><td>VT1622A, supports NTSC/PAL</td></tr></table>

Audio

<table><tr><td>Chipset</td><td>Integrated on CS5536</td></tr><tr><td>Audio Codec</td><td>AC&#x27;97 Realtek ALC655 codec</td></tr></table>

LAN

<table><tr><td>Chipset</td><td>Intel® 82551QM</td></tr><tr><td>Interface</td><td>10BASE-T/100BASE-TX with TCP/UDP/IP checksum off-loading and PXE boot support</td></tr></table>

Multi I/O

<table><tr><td>SATA</td><td>One port for up to two ATAPI devices with UDMA support</td></tr><tr><td>PATA (IDE)</td><td>Two ports for up to four ATAPI devices with UDMA support</td></tr><tr><td>USB</td><td>Up to four ports USB 2.0</td></tr><tr><td>Serial</td><td>Two high speed RS-232C</td></tr><tr><td>LPT/FDD</td><td>Shared</td></tr><tr><td>Keyboard &amp; Mouse</td><td>One PS/2 keyboard and one PS/2 mouse</td></tr></table>

Power Specifications

<table><tr><td>Input Power</td><td>AT mode (5 V only) and ATX mode (5 V and 5 Vsb)</td></tr><tr><td>Power States</td><td>S0, S1, S4, S5</td></tr><tr><td>Power Consumption</td><td>7 W typical (LX800 with 512 MB DDR memory)</td></tr></table>

Mechanical and Environmental

<table><tr><td>Operating Temp.</td><td>0°C to 60°C</td></tr><tr><td>Storage Temp.</td><td>-20°C to 80°C</td></tr><tr><td>Humidity</td><td>5% to 90% Non-condensing</td></tr><tr><td>Shock</td><td>15G peak-to-peak, 11ms duration, non-operation</td></tr><tr><td>Vibration</td><td>Non-operation: 1.88 Grms, 5-500 Hz, each axisOperation: 0.5 Grms, 5-500 Hz, each axis</td></tr><tr><td>Form Factor</td><td>ETX $^{\textregistered}$  rev 2.7, size 95 mm x 114 mm</td></tr><tr><td>Certifications</td><td>CE, FCC</td></tr></table>

Operating Systems

<table><tr><td rowspan="3">Standard Support</td><td>Windows® XP 32-bit</td></tr><tr><td>Windows® NT 2K</td></tr><tr><td>Linux® 2.6.x</td></tr><tr><td rowspan="4">Extended Support</td><td>Embedded® XP BSP</td></tr><tr><td>Windows® CE 5.0/6.0 BSP</td></tr><tr><td>Linux® 2.6.x BSP</td></tr><tr><td>AIDI I2C Library for Win32 and WinCE</td></tr></table>

Functional Diagram
![Here is a concise description of the flowchart, listing the labeled blocks and their connections.\n\n**Labeled Blocks:**\n*   **X4**\n*   **LVDS 18 or 24-bit**\n*   **TV-out Focus FS455 (optional)**\n*   **CPU AMD Geode LX800** (contains sub-blocks: CRT, TTL, PCI Controller, DDR Memory Controller)\n*   **Ethernet Mac/PHY Intel 82551QM**\n*   **PCI ver. 2.2 - 33/66 MHz**\n*   **CS5536 I/O Companion** (contains sub-blocks: I2C, EEPROM CMOS backup, Primary IDE, LPC, Audio, USB 2.0)\n*   **Secondary IDE**\n*   **DDR 400 MHz SODIMM Socket**\n*   **DDR 400 MHz soldered**\n*   **AC'97 Codec ALC 655**\n*   **PCI bus**\n*   **Audio**\n*   **4x USB 2.0**\n*   **X1**\n*   **PCI/SATA VIA 6421A** (contains sub-blocks: SATA, SATA)\n*   **PCI/ISA Bridge IT8888G**\n*   **ISA bus**\n*   **X2**\n*   **IrDA**\n*   **Keyboard**\n*   **Mouse**\n*   **LPT1 / FDD**\n*   **COM1**\n*   **COM2**\n*   **Super I/O Winbond W83627HG**\n*   **BIOS**\n*   **LPC header**\n*   **X3**\n\n**Connections:**\n*   **X4** connects to **LVDS 18 or 24-bit**, **TV-out Focus FS455 (optional)**, **CPU AMD Geode LX800**, **Ethernet Mac/PHY Intel 82551QM**, and a line labeled **Secondary IDE** which leads to the **Primary IDE** block in the **CS5536**.\n*   The **CPU AMD Geode LX800**'s **DDR Memory Controller** connects to **DDR 400 MHz SODIMM Socket** and **DDR 400 MHz soldered**. Its **PCI Controller** connects to the **PCI ver. 2.2 - 33/66 MHz** bus.\n*   **Ethernet Mac/PHY Intel 82551QM** connects to **X4** and the **PCI ver. 2.2 - 33/66 MHz** bus.\n*   **PCI ver. 2.2 - 33/66 MHz** acts as a central bus connecting the **CPU**, **Ethernet**, **CS5536**, **AC'97 Codec**, **PCI/SATA**, and **PCI/ISA Bridge**.\n*   Inside **CS5536 I/O Companion**:\n    *   **I2C** connects to **EEPROM CMOS backup**.\n    *   **LPC** connects to **Super I/O Winbond W83627HG**.\n    *   **Audio** connects to **AC'97 Codec ALC 655**.\n    *   **USB 2.0** connects to the **4x USB 2.0** label.\n    *   **Primary IDE** connects to the **Secondary IDE** line from **X4**.\n*   **AC'97 Codec ALC 655** connects to the **PCI ver. 2.2** bus, **CS5536 Audio**, and the **Audio** block (which connects to **X1**).\n*   **PCI/SATA VIA 6421A** connects to the **PCI ver. 2.2** bus and two dashed **SATA** blocks.\n*   **PCI/ISA Bridge IT8888G** connects to the **PCI ver. 2.2** bus and the **ISA bus** label, which connects to **X2**.\n*   **Super I/O Winbond W83627HG** connects to **CS5536** (via LPC), **BIOS**, **LPC header**, and receives inputs from **X3** via labels **IrDA**, **Keyboard**, **Mouse**, **LPT1 / FDD**, **COM1**, and **COM2**.\n*   **X1** connects to the **PCI bus**, **Audio** block, and **4x USB 2.0** label.\n*   **X2** connects to the **ISA bus** label.\n*   **X3** connects to the labels **IrDA**, **Keyboard**, **Mouse**, **LPT1 / FDD**, **COM1**, and **COM2**, which feed into the **Super I/O**.](.etx-glx-datasheet-19/b9581e5bada0db8aef7d0177be60c4f33759bc769c3d00609e9dd3cc1403d32a.jpg)

Ordering Information
Modules

<table><tr><td>Model Number</td><td>Description/Configuration</td></tr><tr><td>ETX-GLX-800/0</td><td>AMD GeodeTM LX 800 module</td></tr><tr><td>ETX-GLX-800/128</td><td>AMD GeodeTM LX 800 module with 128 MB DDR soldered</td></tr><tr><td>ETX-GLX-800/256</td><td>AMD GeodeTM LX 800 module with 256 MB DDR soldered</td></tr></table>

Accessories

<table><tr><td>Model Number</td><td>Description/Configuration</td></tr><tr><td colspan="2">Heat Spreaders</td></tr><tr><td>HTS-GLX</td><td>Heatspreader for ETX-GLX with threaded standoffs</td></tr></table>
[🔗 Link to the original document](.etx-glx-datasheet-19/etx-glx-datasheet-19.pdf)