![Green printed circuit board with integrated circuits and chips (no readable text or symbols)](.etx802-datasheet-30/5673a7ded32334008c225f1c50758d1ff3eda0d0a3ea8fae0377e984a489a75f.jpg)

# Choose the Ampro by ADLINK™ ETX® 802 for…

Modular, high performance applications that require a 5 volt supply, legacy I/O, and full notebook-style power management.

# Description

The Ampro by ADLINK™ ETX® 802 is a high-performance, low-power Centrino® processor module with advanced networking and high-performance graphics in a modular format that plugs into your custom baseboard.

# Specifications

# Core System

Choice of

– 1.4GHz LV Pentium® M 738

– 1.0GHz ULV Celeron® M 373

– 800MHz ULV Celeron® M

Cache – 2MB, 512KB or 0KB Level 2

DRAM – Up to 1GB PC2700 DDR333 SODIMM, ECC or non-ECC

Chipset – Intel® 855GME/ICH4

FSB – 400MHz

System Controllers – PC-compatible DMA and interrupt controllers and timers

Watchdog Timer

Powerfail Reset –Triggers when input voltage drops below predetermined threshold

# Bus Interface

ISA and PCI

# I/O

PATA Ultra DMA 33/66/100 IDE interfaces, supports up to two hard drives

Serial – 2 ports, TTL, transceivers on baseboard

Parallel – EPP/ECP bidirectional port

Floppy – Supports 1 or 2 drives, shared with parallel

USB – 4 USB 2.0 ports (four root hubs)

Keyboard/Mouse – PS/2 interface

Audio – AC’97 ALC202A audio codec

# Features

Up to 1GB DDR memory, ECC support
On-board ISA bridge and legacy I/O
50% thicker PCB
ACPI 2.0 with S3 support
Industry’s lowest ETX® S3 current draw

![This is a red, grunge-style stamp graphic featuring the text 'EXTREME' on the top line and 'RUGGED' in larger letters on the bottom line. The entire text is enclosed within a distressed red border.](.etx802-datasheet-30/13a5501ebf0047a85ea0775b889f58e462a446f65753b4861abeaced2bf196b1.jpg)

# Network Interface

Ethernet – Intel® 82551QM (10/100 BaseT) Ethernet with Wake-on-LAN

# Video Interface

Controller – Integrated Intel® Extreme Graphics 2

– AGP 128-bit 3D engine
– Supports resolutions to 2048x1536
– Up to 64MB UMA Frame Buffer
– Dual channel LVDS flat panel support

# Software & Development Tools

OS Support – Ampro by ADLINKTM Embedded Linux®, VxWorks® v5.5.1, QNX® v6.3, Windows® CE 5.0, XP, XPe

BIOS – AMI with ACPI 2.0 including S3

# Mechanical

Size – 114x95mm (4.5x3.7”); ETX® form factor

Power Requirements (with 128MB RAM, 100% Loaded)

– 1.4GHz 3.3A @ 5V
– 1.0GHz 2.8A @ 5V
– 800MHz 2.7A @ 5V

Temperature (100 LFM system air flow)\*

• Standard: −20° to +70°C
• Extended: –40° to +85°C
• Storage: –55° to +85°C

Board Thickness – .093” (2.36mm)

\* As measured with Ampro by ADLINKTM Heatsink Kit and 100 LFM or adequate thermal solution

Ordering Information

<table><tr><td>Model Number</td><td>Description/Configuration</td></tr><tr><td>ET1-802-R-08</td><td>ETX® 802, 800MHz ULV Celeron® M CPU, 0KB L2 Cache, ISA, PCI, ACPI</td></tr><tr><td>ET1-802-R-12</td><td>ETX® 802, 1.0GHz ULV Celeron® M CPU, 512KB L2 Cache, ISA, PCI, ACPI</td></tr><tr><td>ET1-802-R-22</td><td>ETX® 802, 1.4GHz LV Pentium® M CPU, 2MB L2 Cache, ISA, PCI, ACPI</td></tr><tr><td>ET1-802-L-22</td><td>1.4GHz QuickStart Kit (R-22 Module, 512MB RAM, software, documentation, Ampro by ADLINKTM AC Baseboard)</td></tr></table>
[🔗 Link to the original document](.etx802-datasheet-30/etx802-datasheet-30.pdf)