# M.2 2280 PCIe SSD ASD+E1T Series

M.2 2280 PCIe SSD for Industrial Embedded Applications

![ADLINK ABDVET\nM.2.2280 PCIe SSD\nADD:BIELC-256GT0\nS17310000000000000\nWV 801000000000000\nCP 3333000000000000\nPAMON\n© 2024/12/26/2024/12/26/2024/12/26/2024/12/26/2024/12/26/2024/12/26/2024/12/26/2024/12/26/2024/12/26/2024/12/26/(nl)](.m-2-2280-pcie-ssd-asd-e1t-series-20230518/8d612c594116fbe15b1f745cdfe451932cd17520069b00739fcb339afd196703.jpg)

# Features

• Advanced Flash Management including static and dynamic wear leveling, bad block management, TRIM, SMART, overprovision, and firmware update
• Low Power Management including DEVSLP mode (optional) and DIPM/HIPM mode
• TCG OPAL 2.0 with Physical Presence SID (PSID)
Operating temperature range: C-grade 0°C to 70°C
I-grade -40°C to 85°C
• MTBF of more than 1,500,000 hours
• Vibration and shock resistance
• RoHS compliant

# Introduction

ADLINK’s industrial M.2 2280 PCIe SSD Series delivers all the advantages of today’s flash disk technologies with PCIe Gen4x4 interface, and is fully compliant with the standard M.2 2280 form factor. Capacities of 256GB to 2TB are available and read/write speeds of up to 4900MB/s and 3700MB/ s respectively are supported.

Ordering Information

<table><tr><td>ASDEM8ELC-256GT0</td><td>M.2 2280 PCIe SSD ASD+E1T Series, BiCS5 3D TLC, 256GB, 0°C to 70°C</td></tr><tr><td>ASDEM8ELC-512GT0</td><td>M.2 2280 PCIe SSD ASD+E1T Series, BiCS5 3D TLC, 512GB, 0°C to 70°C</td></tr><tr><td>ASDEM8ELC-1TBT0</td><td>M.2 2280 PCIe SSD ASD+E1T Series, BiCS5 3D TLC, 1TB, 0°C to 70°C</td></tr><tr><td>ASDEM8ELC-2TBT0</td><td>M.2 2280 PCIe SSD ASD+E1T Series, BiCS5 3D TLC, 2TB, 0°C to 70°C</td></tr><tr><td>ASDEM8ELI-256GT0</td><td>M.2 2280 PCIe SSD ASD+E1T Series, BiCS5 3D TLC, 256GB, -40°C ~ 85°C</td></tr><tr><td>ASDEM8ELI-512GT0</td><td>M.2 2280 PCIe SSD ASD+E1T Series, BiCS5 3D TLC, 512GB, -40°C ~ 85°C</td></tr><tr><td>ASDEM8ELI-1TBT0</td><td>M.2 2280 PCIe SSD ASD+E1T Series, BiCS5 3D TLC, 1TB, -40°C ~ 85°C</td></tr><tr><td>ASDEM8ELI-2TBT0</td><td>M.2 2280 PCIe SSD ASD+E1T Series, BiCS5 3D TLC, 2TB, -40°C ~ 85°C</td></tr></table>

<table><tr><td colspan="2">Model</td><td>ASD+ E1T Series</td></tr><tr><td colspan="2"> $Capacity^1$ </td><td>256GB to 2TB</td></tr><tr><td colspan="2">Form Factor</td><td>M.2 2280 M Key80mm(L) x 22mm(W) x 2.15mm(H)</td></tr><tr><td colspan="2">PCIe Interface</td><td>PCIe Gen4 x4PCI Express Base 4.0NVMe 1.4</td></tr><tr><td colspan="2">Flash Type</td><td>BiCS5 3D TLC</td></tr><tr><td colspan="2"> $Performance^4$ </td><td>Read: up to 4900 MB/sWrite: up to 3700 MB/sRandom 4K Read: &gt; 700K IOPSRandom 4K Write:&gt; 900K IOPS</td></tr><tr><td colspan="2">Power Consumption</td><td>Active mode: &lt;=4500mWIdle mode: &lt;=1500mW</td></tr><tr><td colspan="2">MTBF</td><td>More than 1,500,000 hours</td></tr><tr><td colspan="2">Advanced Flash Management</td><td>Advanced Wear Leveling BadBlock ManagementTRIM S.M.A.R.TOver ProvisionFirmware Update</td></tr><tr><td colspan="2">Low Power Management</td><td>DEVSLP Mode (Optional)DIPM/HIPM Mode</td></tr><tr><td rowspan="2">Temperature  $Range^2$ </td><td> $Operating^3$ </td><td>0°C to 70°C</td></tr><tr><td>Storage</td><td>-40°C to 85°C</td></tr><tr><td colspan="2">Environment</td><td>Vibration:20Hz to 80Hz / 1.52mm80Hz to 2000Hz / 20Gp-pShock (operation/non-operating): 1500G @0.5ms</td></tr><tr><td colspan="2">RoHS compliant</td><td>Yes</td></tr></table>

Notes:
1. Other capacities may be supported in the future.
2.As measured by SMART temperature. Active airflow is recommended within the system for maintaining proper device operating temperature on heavier workloads.
3.Actual operating temperature specification may vary by model.
4.Performance benchmarked by CrystalDiskMark.
[🔗 Link to the original document](.m-2-2280-pcie-ssd-asd-e1t-series-20230518/m-2-2280-pcie-ssd-asd-e1t-series-20230518.pdf)