![Green printed circuit board with integrated circuits and connectors (no readable text or symbols)](.pci-7396-datasheet-en-1/e410d82bd2884c95274254de0d6cecc68c23e24f962a6d9026328e2d6dc18921.jpg)

# Features

■ Supports a 32-Bit 5 V PCI bus
■ 96-CH digital TTL inputs/outputs (PCI-7396)
High driving up to 48 mA (sink) and 15 mA (source)
■ Emulates 4/2 industry standard 8255 PPI (mode 0)
■ Ports are independently configurable as input or output
■ External latch signal available for digital inputs
■ Output status read back
Known power-up states
Onboard 8254 timer/counter chip
■ 1-CH 16-Bit event counter for external signal
■ 1-CH 32-Bit timer for timed interrupt generation
■ Change-of-state (COS) interrupt
■ Multiple programmable interrupt sources
Compact, half-size PCB

■	Supported Operating System

• Windows 7/8 x64/x86, Linux

■	Driver and SDK

• LabVIEW, MATLAB, C/C++, Visual Basic,

Visual Studio.NET

■	Software Utility

• AD-Logger

# Specifications

# Digital I/O

■ Number of channels
• 96 input/output
■ Compatibility: 5 V/TTL
■ Power-on state: input
■ Digital logic levels
• Input high voltage: 2-5.25 V
• Input low voltage: 0-0.8 V
• Output high voltage: 2.4 V minimum
• Output low voltage: 0.5 V maximum
■ Output driving capacity
• Source current: 15 mA
• Sink current: 48 mA
■ Data transfers: programmed I/O

# Interrupt

■ Interrupt #0 sources
• P1C0
• P1C3
• 16-Bit event counter
• Change-of-state detection on any bit of PPI 1 & PPI 2
■ Interrupt #1 sources
• P2C0
• P2C3
• 32-Bit timer (based on 2 MHz internal clock),
• Change-of-state detection on any bit of PPI 3 & PPI 4

# General Specifications

■ I/O connector : One 100-pin SCSI-II female
■ Operating temperature: 0˚C to 60˚C (32˚F to 140˚F)
■ Storage temperature: -20˚C to 80˚C (-4˚F to 176˚F)
■ Relative humidity: 5% to 95%, non-condensing
■ Power requirements
■ Dimensions (not including connectors) 158 mm x 107 mm (6.16” x 4.17”)

<table><tr><td>Device</td><td>+5 V</td></tr><tr><td>PCI-7396</td><td>450 mA typical</td></tr></table>

# Terminal Boards & Cables

■	DIN-100S-01
Terminal Board with One 100-pin SCSI-II Connector and DIN-Rail Mounting (Cables are not included.)
■	DIN-96DI-01
96-CH Isolated DI Terminal Board with DIN-Rail Mounting (Cables are not included.)
■	ACL-102100-1
100-pin SCSI-II cable (mating with AMP-787082-9), 1 M
\* For more information on mating cables, please refer to P3-48/49.

# Ordering Information

■ PCI-7396

96-CH High-Driving DIO Card
[🔗 Link to the original document](.pci-7396-datasheet-en-1/pci-7396-datasheet-en-1.pdf)