![The image displays a graphic of three right-pointing triangles arranged horizontally against a white background. The leftmost triangle is small and light gray. The middle triangle is medium-sized and pale orange. The rightmost triangle is the largest and also pale orange. The triangles are positioned so that they slightly overlap, creating a sense of motion or a 'fast forward' effect. There is no text present in the image.](.pci-7853-54-datasheet-en-1-2/a40d11a97973a641a70b2edbd0840f763aaaf43c5066bb3bfdbf435c263682f3.jpg)

# PCI-7853 / PCI-7854

# High Speed Link Master Controllers

![Green printed circuit board with various electronic components and connectors (no readable text or symbols)](.pci-7853-54-datasheet-en-1-2/9408abff75acfae3c240e82e98fa1d3d2dc7f363c2859a2699b22def525502d3.jpg)

PCI-7853

![**Title:** Block Diagram\n\n**Top Section:**\n*   A vertical stack of three blocks labeled 'User AP', 'Driver', and 'PCI Bus'.\n*   This stack connects via a double-headed vertical arrow to a block labeled 'PCI Bus Controller'.\n\n**Middle Section (HSL Link Master):**\n*   The top 'PCI Bus Controller' connects via a double-headed vertical arrow to an internal block labeled 'PCI Bus Controller'. This entire section is grouped within a larger yellow box labeled 'HSL Link Master' to its left.\n*   Inside this group:\n    *   The internal 'PCI Bus Controller' connects via a double-headed horizontal arrow to a block labeled 'Slave Scan Controller'.\n    *   The 'Slave Scan Controller' connects via a double-headed vertical arrow to a block labeled 'Parallel to Serial Controller'.\n    *   The internal 'PCI Bus Controller' connects via a double-headed horizontal arrow to an external block labeled 'On-board Memory'.\n\n**Bottom Section (Transceiver):**\n*   The 'Parallel to Serial Controller' connects via a downward arrow (labeled 'TX') to a block labeled 'Trans/Receiver'.\n*   The 'Trans/Receiver' connects via a downward arrow to a block labeled 'TXD'.\n*   A block labeled 'RXD' connects via an upward arrow (labeled 'RX') to the 'Trans/Receiver'.](.pci-7853-54-datasheet-en-1-2/edc9516cfc4fa5fb03f24da1405449719a09de04a5ac1f7739838fbb7e58b36a.jpg)

# Features

■ Single/Dual independent network operation
■ Programmable timer interrupt
■ RJ-45 phone jack for easy installation
■ Software selectable transmission speed and mode
■ Supports HSL-HUB3 and HSL-Repeater
■ Timer interrupt
■ DI data transmission interrupt

# Supported Serial Devices

■ Windows® 7/Vista (32-bit)/XP/2000 libraries
■ Linux Driver for Redhat kernel 2.4.x
■ MotionCreatorPro 2™
HSL LinkMaster Utility
■ RTX

# DI Interrupt Function

■ HSL system DI interrupt
■ Any channel of every ID can be set interrupt

![The diagram displays a central grey industrial controller unit with a green circuit board attached to its side. Next to this unit is a yellow lightning bolt icon and the text 'DI interrupt'.\n\nSurrounding the central unit are five black rectangular modules arranged in a loop:\n*   One at the top left.\n*   One at the top right.\n*   One at the middle right.\n*   One at the bottom right.\n*   One at the bottom left.\n\nA thick grey line connects these five modules in a daisy-chain fashion: it starts at the top-left module, extends right underneath the central controller, goes up to the top-right module, down to the middle-right module, down to the bottom-right module, left to the bottom-left module, and loops back up to the top-left module.\n\nAbove the top-left module, there is an orange rounded rectangle and a square icon depicting a signal waveform (square wave).](.pci-7853-54-datasheet-en-1-2/cf7c70bcafa91edb3331490643470b3a63e337f1d2c19d7d06f484e6717a17e7.jpg)

# Ordering Information

■ PCI-7853

Single HSL master controller with two separate connectors

■ PCI-7854

Dual HSL master controller with four separate connectors

# Specifications

<table><tr><td>Model Name</td><td>PCI-7853</td><td>PCI-7854</td></tr><tr><td>Max. Slave Index Support</td><td>63</td><td>126</td></tr><tr><td>Transmission Speed</td><td>3/6/12 Mbps (software control)</td><td>3/6/12 Mbps (software control)</td></tr><tr><td>Transmission Mode</td><td>Half/duplex mode (software control)</td><td>Half/duplex mode (software control)</td></tr><tr><td>Max. Distance</td><td>300 M at 12 Mbps</td><td>300 M at 12 Mbps</td></tr><tr><td>Connection Interface</td><td>RJ-45 x 2</td><td>RJ-45 x 4</td></tr><tr><td>LED Diagnostic</td><td>√</td><td>√</td></tr><tr><td>Storage Consumption</td><td>+5 V @ 500 MA</td><td>+5 V @ 500 MA</td></tr><tr><td>Operating Temperature</td><td>0°C to +70°C</td><td>0°C to +70°C</td></tr><tr><td>Storage Temperature</td><td>-20°C to +80°C</td><td>-20°C to +80°C</td></tr><tr><td>Dimensions</td><td>122 mm x 107 mm (L x W)</td><td>122 mm x 107 mm (L x W)</td></tr></table>
[🔗 Link to the original document](.pci-7853-54-datasheet-en-1-2/pci-7853-54-datasheet-en-1.pdf)