![Green printed circuit board with various electronic components and connectors (no visible text or symbols)](.pci-9111series-datasheet-en-20220804/295660b916c879681d67a75102fe8607aa811faf2a48fd5292cfef9790c52535.jpg)

![The image displays a logo featuring the letters 'PCI' in large, bold black font. Below the letters, the word 'CONVENTIONAL' is written in smaller teal capital letters, followed by a small registered trademark symbol (®).](.pci-9111series-datasheet-en-20220804/30795dbc5c1bc496c68345193a24f68a588256d01e69965efa39961a1d4be6e1.jpg)

# Introduction

ADLINK's PCI-9111 series are 16-CH, 100 kS/s low-cost multi-function DAQ cards that feature flexible analog input configurations. An RC filter is implemented on each A/D input channel to allow attenuation or filtering of the input signals. The PCI-9111 series provide analog inputs with 5 programmable input ranges for bipolar inputs. The PCI-9111 series also support automatic analog input scanning. The PCI-9111DG provides 12-bit A/D resolution while the PCI-9111HR provides 16-bit A/D resolution.

The PCI-911 series also feature 1-CH 12-bit analog output, 16-CH TTL digital inputs and 16-CH TTL digital outputs. ADLINK's PCI-911 series delivers cost-effective and reliable data acquisition capabilities, and is ideal for a broad variety of applications.

# Features

■ Supports a 32-bit 5 V PCI bus

■ 12-bit A/D resolution (PCI-9111DG)

■ 16-bit A/D resolution (PCI-9111HR)

■ 16-CH single-ended analog inputs

■ Up to 100 kS/s sampling rate

Onboard I k-sample A/D FIFO

Programmable gains of x1, x2, x4, x8, x16

Bipolar analog input ranges

Onboard low-pass filtering capability for analog inputs

■ Automatic analog inputs scanning

One 12-bit multiplying analog outputs

■ 16-CH TTL digital inputs and 16-CH TTL digital outputs

4-CH TTL extended digital inputs and 4-CH TTL extended digital outputs

Compact, half-size PCB

Operating Systems

• Windows 7/Vista/XP/2000/2003 Server

\- Linux

Recommended Software

\- AD-Logger

• VB.NET/VC.NET/VB/VC++/BCB/Delphi

\- DAQBench

Driver Support

\- DAQPilot for LabVIEW™

\- DAQ-MTLB for MATLAB®

• PCIS-DASK for Windows

• PCIS-DASK/X for Linux

# Specifications

# Analog Input

■ Number of channels: 16 single-ended

Resolution

· 12 bits (PCI-9111DG)

· 16 bits (PCI-9111HR)

■ Conversion time: 8 μs

■ Maximum sampling rate: 100 kS/s

■ Input signal ranges (software programmable)

<table><tr><td rowspan="2">Gain</td><td>Input Range</td></tr><tr><td>Bipolar</td></tr><tr><td>1</td><td>±10 V</td></tr><tr><td>2</td><td>±5 V</td></tr><tr><td>4</td><td>±2.5 V</td></tr><tr><td>8</td><td>±1.25 V</td></tr><tr><td>16</td><td>±0.625 V</td></tr></table>

Accuracy

<table><tr><td>Gain</td><td>Accuracy</td></tr><tr><td>1, 2</td><td>0.01% of FSR ± 1 LSB</td></tr><tr><td>4, 8</td><td>0.02% of FSR ± 1 LSB</td></tr><tr><td>16</td><td>0.04% of FSR ± 1 LSB</td></tr></table>

■ Input coupling: DC
■ Overvoltage protection: continuous ±35 V
■ Input impedance: 10 MΩ
- Trigger modes: software, pacer, and external trigger (5 V/TTL compatible)
■ FIFO buffer size: 1 k samples
■ Data transfers: polling, interrupt

# Analog Output

■ Number of channels: I voltage output (NO s)
■ Resolution: 12 bits
■ Output ranges (jumper selectable)

<table><tr><td colspan="2">Output Range</td></tr><tr><td>Bipolar</td><td>±10 V</td></tr><tr><td>Unipolar</td><td>0 to 10 V</td></tr></table>

■ Output driving capacity: ±5 mA max
■ Settling time: 30 μs
■ Data transfers: programmed I/O

# Digital I/O

■ Number of channels: 16 inputs and 16 outputs
■ Compatibility: 5 V/TTL
■ Data transfers: programmed I/O

# General Specifications

I/O connector

· 37-pin D-sub female
· 20-pin ribbon male x 2

- Operating temperature: 0°C to 60°C
■ Storage temperature: -20°C to 80°C
■ Relative humidity: 5% to 95%, non-condensing
Power requirements

<table><tr><td>Device</td><td>+5 V</td></tr><tr><td>PCI-9111DG</td><td>570 mA typical</td></tr><tr><td>PCI-9111HR</td><td>570 mA typical</td></tr></table>

■ Dimensions (not including connectors)

175 mm × 107 mm

# Terminal Boards & Cables

DIN-37D-01\*
Terminal Board with One 37-pin D-sub Connector and DIN-Rail Mounting
DIN-20P-01\*
Terminal Board with One 20-pin Ribbon Connector and DIN-Rail Mounting
ACLD-9137-01
General-Purpose Terminal Board with One 37-pin D-sub Male Connector
ACLD-9188-01\*
General-Purpose Terminal Board with Two 20-pin Ribbon Connectors and One 37-pin D-sub Connector
ACLD-9182A-01\*
Terminal Board with 16-CH Isolated Digital Inputs
ACLD-9185-01\*
Terminal Board with 16-CH Relay Outputs
\* Cables are not included. For information on mating cables, refer to P2-61/62

# Ordering Information

PCI-9111DG

16-CH 12-Bit 100 kS/s Low-Cost Multi-Function DAQ Card

PCI-9111HR

16-CH 16-Bit 100 kS/s Low-Cost Multi-Function DAQ Card

Pin Assignment

<table><tr><td></td><td colspan="3">CN3</td><td></td><td colspan="3">CNI</td></tr><tr><td>AI0</td><td>1</td><td>20</td><td>AI8</td><td>DI0</td><td>1</td><td>2</td><td>DI1</td></tr><tr><td>AI1</td><td>2</td><td>21</td><td>AI9</td><td>DI2</td><td>3</td><td>4</td><td>DI3</td></tr><tr><td>AI2</td><td>3</td><td>22</td><td>AI10</td><td>DI4</td><td>5</td><td>6</td><td>DI5</td></tr><tr><td>AI3</td><td>4</td><td>23</td><td>AI11</td><td>DI6</td><td>7</td><td>8</td><td>DI7</td></tr><tr><td>AI4</td><td>5</td><td>24</td><td>AI12</td><td>DI8</td><td>9</td><td>10</td><td>DI9</td></tr><tr><td>AI5</td><td>6</td><td>25</td><td>AI13</td><td>DI10</td><td>11</td><td>12</td><td>DI11</td></tr><tr><td>AI6</td><td>7</td><td>26</td><td>AI14</td><td>DI12</td><td>13</td><td>14</td><td>DI13</td></tr><tr><td>AI7</td><td>8</td><td>27</td><td>AI15</td><td>DI14</td><td>15</td><td>16</td><td>DI15</td></tr><tr><td>A.GND</td><td>9</td><td>28</td><td>A.GND</td><td>GND</td><td>17</td><td>18</td><td>GND</td></tr><tr><td>A.GND</td><td>10</td><td>29</td><td>A.GND</td><td>+5Vout</td><td>19</td><td>20</td><td>+12Vout</td></tr><tr><td>N/C</td><td>11</td><td>30</td><td>DA Out</td><td></td><td></td><td></td><td></td></tr><tr><td>PreTrg</td><td>12</td><td>31</td><td>EDI0</td><td></td><td colspan="3">CN2</td></tr><tr><td>+12Vout</td><td>13</td><td>32</td><td>EDI1</td><td>DO0</td><td>1</td><td>2</td><td>DO1</td></tr><tr><td>D.GND</td><td>14</td><td>33</td><td>EDI2</td><td>DO2</td><td>3</td><td>4</td><td>DO3</td></tr><tr><td>D.GND</td><td>15</td><td>34</td><td>EDI3</td><td>DO4</td><td>5</td><td>6</td><td>DO5</td></tr><tr><td>ExtTrg</td><td>16</td><td>35</td><td>EDO0</td><td>DO6</td><td>7</td><td>8</td><td>DO7</td></tr><tr><td>EDO1</td><td>17</td><td>36</td><td>EDO2</td><td>DO8</td><td>9</td><td>10</td><td>DO9</td></tr><tr><td>EDO3</td><td>18</td><td>37</td><td>N/C</td><td>DO10</td><td>11</td><td>12</td><td>DO11</td></tr><tr><td>+5Vout</td><td>19</td><td></td><td></td><td>DO12</td><td>13</td><td>14</td><td>DO13</td></tr><tr><td></td><td></td><td></td><td></td><td>DO14</td><td>15</td><td>16</td><td>DO15</td></tr><tr><td></td><td></td><td></td><td></td><td>GND</td><td>17</td><td>18</td><td>GND</td></tr><tr><td></td><td></td><td></td><td></td><td>+5Vout</td><td>19</td><td>20</td><td>+12Vout</td></tr></table>
[🔗 Link to the original document](.pci-9111series-datasheet-en-20220804/pci-9111series-datasheet-en-20220804.pdf)