![Green PCI-9112 electronic circuit board with various components and connectors (no readable text or symbols)](.pci-9112-datasheet-en-20220804/dc91e249307be2dcf6499cfb40095df7d51c3d0eff09614b156b69b1b35b2826.jpg)

# Features

■ Supports a 3.3 V or 5 V PCI bus (PCI-9112)
12-Bit A/D resolution
■ Up to 110 kS/s sampling rate
■ 16-CH single-ended or 8-CH differential inputs
■ Bipolar or unipolar analog input ranges
Programmable gains of x0.5, x1, x2, x4, x8
■ Automatic analog inputs scanning
Bus-mastering DMA for analog inputs
■ 2-CH 12-Bit multiplying analog outputs
■ 16-CH TTL digital inputs and 16-CH TTL digital outputs
■ I-CH 16-Bit general-purpose timer/counter

■ Supported Operating System

\- Windows 7/8 x64/x86, Linux

Driver and SDK

\- LabVIEW, MATLAB, C/C++, Visual Basic, Visual Studio.NET

Software Utility

\- AD-Logger

# Specifications

# Analog Input

■ Number of channels: 16 single-ended or 8 differential
Resolution: 12 Bit
■ Conversion time: 8 μs
■ Maximum sampling rate: 110 kS/s
■ Input signal ranges

<table><tr><td rowspan="2">Gain</td><td colspan="2">Input Range</td></tr><tr><td>Bipolar</td><td>Unipolar</td></tr><tr><td>0.5</td><td>±10 V</td><td>-</td></tr><tr><td>1</td><td>±5 V</td><td>0 to 10 V</td></tr><tr><td>2</td><td>±2.5 V</td><td>0 to 5 V</td></tr><tr><td>4</td><td>±1.25 V</td><td>0 to 2.5 V</td></tr><tr><td>8</td><td>±0.625 V</td><td>0 to 1.25 V</td></tr></table>

Accuracy

<table><tr><td>Gain</td><td>Accuracy</td></tr><tr><td>0.5, 1</td><td>0.01% of FSR ± 1 LSB</td></tr><tr><td>2, 4</td><td>0.02% of FSR ± 1 LSB</td></tr><tr><td>8</td><td>0.04% of FSR ± 1 LSB</td></tr></table>

■ Input coupling: DC
■ Overvoltage protection: continuous ±35 V
■ Input impedance: I GΩ
Trigger modes: software
■ Data transfers:
programmed I/O, interrupt, bus-mastering DMA

# Analog Output

■ Number of channels: 2 voltage outputs
Resolution: 12 Bit
■ Output ranges (software programmable)
■ Output driving capacity: ±5 mA max
■ Settling time: 30 μs to 0.5 LSB
■ Data transfers: programmed I/O

<table><tr><td colspan="2">Output Range</td></tr><tr><td>Unipolar</td><td>0 to 10 V, 0 to 5 V, 0 to EXTREF</td></tr></table>

# Digital I/O

■ Number of channels: 16 inputs and 16 outputs
■ Compatibility: 5 V/TTL
■ Data transfers: programmed I/O

# General-Purpose Timer/Counter

■ Number of channels: I
Resolution: 16 Bit
■ Compatibility: 5 V/TTL
Base clock available: 2 MHz, external clock to 10 MHz

# Calibration

PCI-9112 : Calibrate Analog Output on 5V
PCI-9112A : Calibrate Analog Output on 10V

# General Specifications

■ I/O connector: 37-pin D-sub female
Operating temperature: 0°C to 60°C (32°F to 140°F)
■ Storage temperature: $-20^{\circ}C$ to $80^{\circ}C$ ( $-4^{\circ}F$ to $176^{\circ}F$ )
■ Relative humidity: 5% to 95%, non-condensing
Power requirements

<table><tr><td></td><td>+5 V</td><td>+12 V</td></tr><tr><td>PCI-9112A</td><td>460 mA typical</td><td>110 mA typical</td></tr></table>

■ Dimensions (not including connectors)
- 175 mm x 107 mm (6.82" x 4.17")

![The image displays a logo consisting of the text 'PCI' in large, bold, italicized sans-serif letters. The letters 'P' and 'C' appear black with a teal gradient on their left sides, while the 'I' is solid teal. A registered trademark symbol (®) is positioned to the right of the 'I'. Below this main text, the word 'CONFERENCES' is written in smaller, teal, italicized capital letters, spanning the width of the logo. A second registered trademark symbol (®) is positioned to the right of the 'S'.](.pci-9112-datasheet-en-20220804/f99c88510f7ef4ecfa806ca53b28244b87e91fd82a39bc18e50ca4c9431df20a.jpg)

# Terminal Boards & Cables

# For PCI-9112:

DIN-37D-01
Terminal Board with One 37-pin D-sub Connector and DIN-Rail Mounting

DIN-20P-01

Terminal Board with One 20-pin Ribbon Connector and DIN-Rail Mounting

ACLD-9137-01

General-Purpose Terminal Board with One 37-pin D-sub Male Connector

ACLD-9138-01

General-Purpose Terminal Board with One 37-pin D-sub Connector

ACLD-9182A-01

Terminal Board with 16-CH Isolated Digital Inputs

ACLD-9185-01

Terminal Board with 16-CH Isolated Digital Inputs

ACL-10137-IMM

37-pin D-sub male/male cable, I M

ACL-10137-IMF

37-pin D-sub male/female cable, I M

ACL-10120-1

20-pin flat cable, I M

ACL-10237-1

37-pin D-sub male/male flat cable, I M

\* For more information on mating cables, please refer to P3-48/49.

# Ordering Information

# PCI-9112

16-CH 12-Bit 110 kS/s Multi-Function DAQ Card (AO Calibrated on 5V)

# PCI-9112A

16-CH 12-Bit 110kS/s Multi Function DAQ Card (AO Calibrated on 10V)
[🔗 Link to the original document](.pci-9112-datasheet-en-20220804/pci-9112-datasheet-en-20220804.pdf)