# ADM-AL30

# Autonomous Driving

# ECU Computer

# User’s Manual

![Front view of a black SADM device with external ports and connectors (no readable text or symbols beyond branding)](.adm-al30-50m-41056-1000-10/fbd5cb96352edc461f10c520db3243d5db638296cf59616b5c4110711ac645ca.jpg)

Manual Rev.: 1.0

Revision Date: April 18, 2025

Part No: 50M-41056-1000

Revision History

<table><tr><td>Revision</td><td>Release Date</td><td>Description of Change(s)</td></tr><tr><td>1.0</td><td>2025-04-18</td><td>Official release</td></tr></table>

# Preface

# Copyright © 2025 ADLINK Technology Inc.

This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

# Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

# Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.

![Symbol of a trash bin crossed with a diagonal line, no text or labels present](.adm-al30-50m-41056-1000-10/6650587816f51e566789a615c6c8217b32706e2349d409aea493e53917f8e39d.jpg)

Battery Labels (for products with battery)

![Symbol of a trash bin crossed out by two diagonal lines (no text or numbers present)](.adm-al30-50m-41056-1000-10/f41e8099c60ef30058d00c2fdb4af4b4714d43da63cacbff8469b8c166c6533d.jpg)

![Recycling symbol icon with three chasing arrows inside a square frame (no text or labels)](.adm-al30-50m-41056-1000-10/87946c8f23f3f9034081bb90da591aaf0d59a1357f9587c9b09a6066b29f8097.jpg)

Li-ion

![RECYCLE\nRBRC\nLi-ion\n1.800.822.8837](.adm-al30-50m-41056-1000-10/dbff3489d2d374eb4595e8b72985704188bf82a6d08d46c2d2f2d734e8d358a2.jpg)

![Abstract geometric pattern with interlocking black and white shapes (no text or symbols)](.adm-al30-50m-41056-1000-10/01edabcd7d62de93aa3215f124d2b6d81e9b741c78631db62d83ac9edf4da165.jpg)

ᘄ㟁ụㄳᅇᨲ

# California Proposition 65 Warning

![The image displays a standard warning sign featuring a yellow triangle with a thick black border. Centered inside the triangle is a large black exclamation point.](.adm-al30-50m-41056-1000-10/bc0f6512bbf2a1879cc1a29deb4b86e5626ff20a2b83af30c04f2a248837fb05.jpg)

WARNING: This product can expose you to chemicals including acrylamide, arsenic, benzene, cadmium, Tris(1,3-dichloro-2-propyl) phosphate (TDCPP), 1,4- Dioxane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and vinyl materials, which are known to the State of California to cause cancer, and acrylamide, benzene, cadmium, lead, mercury, phthalates, toluene, DEHP, DIDP, DnHP, DBP, BBP, PVC, and vinyl materials, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

# Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

# Conventions

Take note of the following conventions used throughout this manual to make sure that users perform certain tasks and instructions properly.

![The image displays a white document icon with a folded top-right corner and faint horizontal lines running across the page. A large, bold red checkmark is superimposed over the document, indicating approval or completion.](.adm-al30-50m-41056-1000-10/3d0417d5c704d6bd6739bcd9786d487a76461fdf7fc9187472fc5da65fc7e1cd.jpg)
NOTE:

Additional information, aids, and tips that help users perform tasks.

![The image displays a yellow equilateral triangle with a thick black border. Inside the triangle, centered vertically and horizontally, is a large black exclamation point.](.adm-al30-50m-41056-1000-10/1ee0801d7ab6b2cb0d3b049959338a3933a9fe081a51634d14f92abd4581be6d.jpg)
CAUTION:

Information to prevent minor physical injury, component damage, data loss, and/or program corruption when trying to complete a task.

ATTENTION: Informations destinées à prévenir les blessures corporelles mineures, les dommages aux composants, la perte de données et/ou la corruption de programme lors de l'exécution d'une tâche.

![The image displays a red triangle with a white border. Inside the red area is a large white exclamation point.](.adm-al30-50m-41056-1000-10/42042e8222313e68e2386cca333c07321896aeb21ed45059df5a6f0811371f3b.jpg)
WARNING:

Information to prevent serious physical injury, component damage, data loss, and/or program corruption when trying to complete a specific task.

AVERTISSEMENT: Informations destinées à prévenir les blessures corporelles graves, les dommages aux composants, la perte de données et/ou la corruption de programme lors de l'exécution d'une tâche spécifique.

# Table of Contents

# Revision History.......... ii

# Preface ............ iii

# List of Tables ........ . vii

# List of Figures ........ ix

# 1 Introduction .........

1.1 Overview... 1
1.2 Features... 1
1.3 Packing List ... 2
1.4 Optional Accessories . 2

# 2 Specifications ........ 3

2.1 ADM-AL30 ... 3
2.2 ADM-AL30 Functional Block Diagram ... 5
2.3 Display Options.. 5
2.4 Mechanical Dimensions.. 6

# 3 System Layout.......... 9

3.1 Front Panel I/O 9

# 4 Getting Started ..... . 27

4.1 SSD Removal .. 27
4.2 Driver Installation ... 29
4.3 Marvell Ethernet Switch Reset Workaround . 3 1
4.4 Marvell Ethernet Switch Speed Adjustment. 3 3

# 5 Appendix: BIOS Setup ........... .. 37

5.1 Menu Structure . 38
5.2 Main .... 38
5.3 Advanced.. 39

5.4 Chipset... . 44
5.5 Security .... 47
5.6 Boot .. 48
5.7 Save & Exit ... 50

# Important Safety Instructions....... .... 51

# Consignes de Sécurité Importante ......... . 53

# Getting Service ........ .... 55

# List of Tables

Table 2-1: Maximum Resolution .. . 5
Table 3-1: Front/Side Panel I/O Legend . 9
Table 3-2: DisplayPort Pin Definition .. .. 11
Table 3-3: HDMI Connector Pin Definition... . 12
Table 3-4: DC Power Input Pin Definition .. .. 13
Table 3-5: DB9 Pin Definitions... . 15
Table 3-6: SATA Connector Pin Definition .. .. 16
Table 3-7: M12 Connector Pin Definition... .. 17
Table 3-8: 1GbE Base-T1 Connector (2x3) Pin Definition......... 18
Table 3-9: 1GbE Base-T1 Connector (1x2) Pin Definition......... 19
Table 3-10: CMC Connector Pin Definition.. .. 20
Table 3-11: USB Port Pin Definition .. 21

This page intentionally left blank.

# List of Figures

Figure 2-1: ADM-AL30 Functional Block Diagram . 5
Figure 2-2: ADM-AL30 Top View .... . 6
Figure 2-3: ADM-AL30 Front View.. 7
Figure 3-1: Front Panel I/O . . 9
Figure 3-2: DisplayPort Connector Pin Definition.. . 11
Figure 3-3: DC Power Input .. . 13
Figure 3-4: COM Port Pin Definition.. . 15
Figure 3-5: SATA Connector.. . 16
Figure 3-6: M12 Connector for 10GbE. . 17
Figure 3-7: 1GbE Base-T1 Connector (2x3) . . 18
Figure 3-8: 1GbE Base-T1 Connector (1x2) . . 19
Figure 3-9: CMC Connector.. .. 20
Figure 3-10: USB Port.. . 21
Figure 3-11: M.2 Main Board Top Side.. . 24
Figure 3-12: M.2 Main Board Bottom Side... .. 25
Figure 3-13: M.2 Backplane.. .. 25

This page intentionally left blank.

# 1 Introduction

# 1.1 Overview

The ADLINK ADM-AL30 features an Intel® Core™ processor and one PCIe x16 for GPU expansion. DDR5 memory and standard NVIDIA RTX4000 SFF card makes the ADM-AL30 a powerful autonomous-driving ECU.

ADM-AL30 features a first-of-its-kind 88Q6113 automotive Ethernet switch by Marvell. It is fully compliant with IEEE 802.3 automotive standard, delivering high-bandwidth with advanced routing and security. For more info, please visit the Marvell 88Q6113 product page.

# 1.2 Features

 12th Generation Intel® Core™ i7-12700E / i9-12900E processor
 R680E chipset
 Standard 128GB DDR5 RAM, 4x 32GB SODIMM
Expansion: 1x PCIe Gen4 x16 slot, featuring NVIDIA RTX 4000 SFF Ada gen card
 1x DisplayPort, 1x HDMI, supporting 2 independent displays
 4x External USB ports (USB 3.2 Gen 2)
 2x Intel X710 10GbE with M12 connector
 4x CAN 2.0, additional 8x optional CAN FD via M.2 module, all via Molex CMC connector
 2x RS232 COM ports
Marvell 88Q6113 automotive gigabit switch, 8x 1G BASE-T1, MATEnet connector
 2x Onboard SATA 6Gb/s port for 2.5” SSD and 1x 2280 NVMe/SATA M.2 slot
 Built-in 9V DC to 36V DC power input

# 1.3 Packing List

Before unpacking, check the shipping carton for any damage. If the shipping carton and/or contents are damaged, inform your dealer immediately. Retain the shipping carton and packing materials for inspection. Obtain authorization from your dealer before returning any product to ADLINK. Ensure that the following items are included in the package.

 ADM-AL30
 Accessory box (mounting bracket, screws, CAN test cable for the optional M.2 CAN-FD modules, PWR test cable with ignition switch)

# 1.4 Optional Accessories

 450W AC-DC adapter

# 2 Specifications

# 2.1 ADM-AL30

<table><tr><td colspan="2">System Core</td></tr><tr><td>Processor</td><td>Intel® CoreTM i9-12900E (8 P-cores/8 E-cores, 65W, up to 5.0 GHz) Intel® CoreTM i7-12700E (8 P-cores/4 E-cores, 65W, up to 4.8 GHz)</td></tr><tr><td>Chipset</td><td>R680E</td></tr><tr><td>Memory</td><td>128 GB DDR5 SODIMM (32GB x4)</td></tr><tr><td colspan="2">I/O Interface</td></tr><tr><td>Display</td><td>1x DP++, 1x HDMI (2 independent displays)</td></tr><tr><td>GPU</td><td>NVIDIA RTX 4000 SFF Ada gen card</td></tr><tr><td>Ethernet</td><td>2x Intel X710 10GbE with M12 connector8x 1G BASE-T1 with MATEnet connector</td></tr><tr><td>Serial Ports</td><td>COM1/2: RS-232</td></tr><tr><td>CAN bus</td><td>Standard: 4x CAN 2.0 (Molex CMC connector)Optional: 8x CAN FD (Molex CMC connector)</td></tr><tr><td>USB</td><td>4x USB 3.2 Gen2 + 1x internal USB 2.0</td></tr><tr><td>M.2</td><td>1x M.2 2230, E-key, PCIe Gen3 x1 (for WiFi/BT module)2x M.2 2280, M-key, PCIe Gen3 x2 (for optional CAN FD modules)</td></tr><tr><td>TPM</td><td>TPM 2.0</td></tr><tr><td colspan="2">Storage</td></tr><tr><td>2.5" SATA</td><td>Standard: 1x 2TB; additional SSD optional</td></tr><tr><td>NVMe/SATA M.2 2280</td><td>1x 512GB NVMe</td></tr><tr><td colspan="2">Physical</td></tr><tr><td>Dimensions</td><td>325 x 258 x 145mm</td></tr><tr><td>Weight</td><td>8.835 Kg</td></tr><tr><td colspan="2">Power Supply</td></tr><tr><td>DC Input</td><td>9 to 36V</td></tr><tr><td>AC Input (optional)</td><td>450W AC-DC adapter</td></tr><tr><td colspan="2">Environmental</td></tr><tr><td>Operating Temperature</td><td>-20°C to 60°C (without GPGPU card)0°C to 45°C (with GPGPU card)</td></tr><tr><td>Storage Temperature</td><td>-40°C to 85°C (excluding storage devices)</td></tr><tr><td>Humidity</td><td>approx. 95% @ 40°C (non-condensing)</td></tr><tr><td>Vibration</td><td>Operating: 3 Grms, 5-500 Hz, 3 axes @ 1 hr (w/2.5" SSD)Operating: 5 Grms, 5-500 Hz, 3 axes @ 30 mins (w/ 2.5" SSD)</td></tr><tr><td>Shock</td><td>Operating: 50 Grms, half sine 11ms duration (w/ 2.5" SSD)</td></tr><tr><td>ESD</td><td>Contact +/-4kV, Air +/-8kV</td></tr><tr><td>EMC</td><td>CE/FCC, class A, EN 55032/35 ; ISO 7637-2: 2011, Level 3, E-Mark, RCM</td></tr><tr><td>Design Compliance</td><td>ISO 16750-2</td></tr></table>

# 2.2 ADM-AL30 Functional Block Diagram

System Block Diagram
![Here is an accurate and concise description of the flowchart/block diagram, listing the labeled blocks and connections verbatim:\n\n**Left Side: External I/O and Power Inputs**\n*   **Video/Connectivity:** `HDMI` and `DP` connect via `HDMI 1.4` -) `NXP PTN3360` -) `DDI` to the `Processor Intel® Alder Lake i7/i9 CPU`.\n*   **USB:** `4x USB 3.2x2 Type A` connects via `USB 3.2 Gen2x4` and `USB 2.0 x4` to the `PCH R680E`.\n*   **Keys/Fan:** `Reset Key` and `1x FAN` connect via `Cable x1` and `FAN` to `Super I/O NCT1626D`.\n*   **Serial:** `2x RS-232 DB9(M)` connects via `RS232 x2` to `ADM 213E` (which connects via `UARTx2` to `Super I/O NCT1626D`).\n*   **Power:** `Power Key` connects via `GPIO` to `Power Board`. `DC In Jack / Ignition 9-36V` connects via `Power 9-36V Ignition signal` to `Power Board`.\n\n**Center: System Core (Processor & Chipset)**\n*   **Processor:** `Processor Intel® Alder Lake i7/i9 CPU` connects to `DMI Gen4 x8` -) `PCH R680E`. It also connects to `CH1/CH2` -) `4x DDR5 SODIMM, Up-to 128GB`.\n*   **Expansion Slots:** The Processor connects to `PCIe x16 (GEN4)` -) `PCIE slot RTX4000 SEE(70W)`, `PCIe x4` -) `Intel X710-AT2` -) `MDI x2`, and `SATA3 x2` -) `2x 2.5' SATA CONN`.\n*   **Chipset (PCH):** `PCH R680E` connects to `SPI` -) `TPM2.0 SLB9670`, `PCIE/USB2` -) `1x M.2 Key E 2230`, `eSPI` -) `Super I/O NCT1626D`, `GPIO` -) `Power Board`, and `I2C Signal (PWR_ON)` -) `Power Board`.\n*   **Power Management:** The `Power Board` contains `Power IC DC to DC` and `MCU TM4C123GH6NMRTR`. A red arrow labeled `SYS Power 12V 14V` points to `Leading EDGE COMPUTING`.\n\n**Right Side: Expansion Modules (BP and AFM)**\n*   **Top Section (BP):** Includes `PCIE slot RTX4000 SEE(70W)`, `Intel X710-AT2`, `2x 2.5' SATA CONN`, and external connection `2x 10G Base-T (M12) 21-E2000-0080`.\n*   **Middle Section (AFM):**\n    *   `PICE x1` -) `Intel i210` -) `MDI` -) `PHY Marvell 88EA1512`.\n    *   `PICEx2` -) `Marvell 88Q6113`.\n    *   `P9`, `P1-P6`, `P7-P8` connect `Marvell 88Q6113` to `Marvell 88Q228M`.\n    *   `SGMII` connects `Marvell 88Q228M` to `PHY Marvell 88EA1512`.\n    *   `SGMII*6` connects to `1G Base-T T1*6`.\n    *   `RGMII*2` connects to `1G Base-T T1*2`.\n    *   `USB2.0x2` -) `CAN Controller Fintek FB1604N5*2`.\n    *   `CAN 2.0*4` -) `CAN Transceiver FB1251` -) `CAN 2.0*4`.\n    *   External connections include `8x 1G Base-T1 MATEnet` and `1x Molex CMC header 32P`.\n*   **Bottom Section (BP):**\n    *   `PCIE x2` -) `m.2 M-key 2280*1` -) `CAN-FD*4 cable`.\n    *   `PCIE x2` -) `m.2 M-key 2280*1` -) `CAN-FD*4 cable`.](.adm-al30-50m-41056-1000-10/43f079d5ba530decb90895971820f50aeba050b556a3a38bd71b903664b2b554.jpg)

Figure 2-1: ADM-AL30 Functional Block Diagram

# 2.3 Display Options

With computing and graphic performance enhancement from its 12th Generation Intel processors, the ADM-AL30 can support two independent displays in the following configurations:

<table><tr><td></td><td>Port</td><td>Resolution</td></tr><tr><td>Display Option 1</td><td>DisplayPort1</td><td>4096x2304@60Hz</td></tr><tr><td>Display Option 2</td><td>HDMI1</td><td>3840x2160 @ 60Hz</td></tr></table>

Table 2-1: Maximum Resolution

# 2.4 Mechanical Dimensions

All dimensions in millimeters.

258mm

![ADM](.adm-al30-50m-41056-1000-10/8c6e3cff72cbeff7a214522a436543ebef8baea81eba7ac60d535b74620e3ffd.jpg)

Figure 2-2: ADM-AL30 Top View

![325\nADLINK\nDP\nUSB 3.1\nUSB 3.2\nWD\n10G BASET\n10G BASET T1\nHDMI\n10G BASET T1\nCAN FD / CAN 3.0\nCOM 1\nCOM 2\n+ -\n- - -\n10G BASET\n10G BASET T\n+ -\n9-36V DC IN\n145](.adm-al30-50m-41056-1000-10/8c837bacc0fc72fc7bbc98207016af61e6c4755bdda0149fb873794371dcd611.jpg)

Figure 2-3: ADM-AL30 Front View

This page intentionally left blank.

# 3 System Layout

# 3.1 Front Panel I/O

The ADM-AL30 provides the following front panel features.

![ADLINK\nA\nB\nX8M\n-\n+\n+\n9-36V DC DI\n10G BASE T\n10G BASE T1\nHDMI\n1G BASE T1\nF\nCOM 1\nG\nCOM 2\nL\nN\nJ WO I\nK\nD\nE\nH\nUS 3.3\nUSB 3.3\n1\n2\n3\n4\nCAM FD / CAM 3.0\nL](.adm-al30-50m-41056-1000-10/60779b7d97e1e7b3dd79cbcd910aec4c46fbcad5df5506d9bd142f3a77b9e681.jpg)

Figure 3-1: Front Panel I/O

<table><tr><td>A</td><td>Ground</td><td>I</td><td>LED - Watchdog</td></tr><tr><td>B</td><td>9-36V DC In</td><td>J</td><td>LED - SATA activity</td></tr><tr><td>C</td><td>M12 connector for 10GbE</td><td>K</td><td>LED - Diagnostics</td></tr><tr><td>D</td><td>DisplayPort++</td><td>L</td><td>CAN FD / CAN 2.0 connector</td></tr><tr><td>E</td><td>HDMI</td><td>M</td><td>Reset button</td></tr><tr><td>F</td><td>1GbE Base-T1 connector</td><td>N</td><td>Power button</td></tr><tr><td>G</td><td>RS-232 DB9 male connector</td><td>O</td><td>Wi-Fi/BT antenna connector (optional)</td></tr><tr><td>H</td><td>USB 3.2</td><td colspan="2"></td></tr></table>

Table 3-1: Front/Side Panel I/O Legend

# 3.1.1 Power Button

The power button is a non-latched push button with a blue LED indicator.

<table><tr><td>System Status</td><td>Power LED</td></tr><tr><td>System turn on</td><td>Light ON</td></tr><tr><td>Suspend (S3)</td><td>Blinking</td></tr><tr><td>Hybernation (S4)</td><td>Blinking</td></tr><tr><td>Power OFF (S5)</td><td>Light OFF</td></tr></table>

# 3.1.2 LED Indicators

The three LEDs on the front panel indicate the following.

<table><tr><td>LED Indicator</td><td>Location</td><td>Color</td><td>Description</td></tr><tr><td>Watchdog (WD)</td><td>Top</td><td>Yellow</td><td>Indicates watchdog timer status. When watchdog timer starts, the LED will be on until system boot up success. When system does not boot up and the timer is expired, the system will automatically reboot.</td></tr><tr><td>SATA (HD)</td><td>Middle</td><td>Orange</td><td>When blinking, indicates the SATA is active.</td></tr><tr><td>Diagnostic (DG)</td><td>Bottom</td><td>Green</td><td>If lit continuously, indicates no physical storage is connected. If blinking, indicates no memory is installed on either SO-DIMM socket.</td></tr></table>

# 3.1.3 PCI Express x16 Slot

One PCI express x16 slot supports expansion with standard PCIe Gen4 cards and full PCI express x16 signals.

# 3.1.4 Reset Button

The reset button executes a hard reset for the ADM-AL30.

# 3.1.5 DisplayPort Connector

A DisplayPort connector on the front panel can connect to VGA, DVI, HDMI and DisplayPort monitors using corresponding adapters.

![19\n1\n20\n2](.adm-al30-50m-41056-1000-10/cce2b275be73450990b18997cd53389a3971fc121fd412736753a6985013bd1d.jpg)

Figure 3-2: DisplayPort Connector Pin Definition

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>CN_DDPx0+</td><td>11</td><td>GND</td></tr><tr><td>2</td><td>GND</td><td>12</td><td>CN_DDPx3-</td></tr><tr><td>3</td><td>CN_DDPx0-</td><td>13</td><td>CN_DDPx_AUX_SEL</td></tr><tr><td>4</td><td>CN_DDPx1+</td><td>14</td><td>CN_DDPx_CONFIG2</td></tr><tr><td>5</td><td>GND</td><td>15</td><td>CN_DDPx_AUX+</td></tr><tr><td>6</td><td>CN_DDPx1-</td><td>16</td><td>GND</td></tr><tr><td>7</td><td>CN_DDPx2+</td><td>17</td><td>CN_DDPx_AUX-</td></tr><tr><td>8</td><td>GND</td><td>18</td><td>CN_DDPx_HPD</td></tr><tr><td>9</td><td>CN_DDPx2-</td><td>19</td><td>GND</td></tr><tr><td>10</td><td>CN_DDPx3+</td><td>20</td><td>+V3.3_DDPx_PWR_CN</td></tr></table>

Table 3-2: DisplayPort Pin Definition

# 3.1.6 HDMI Connector

The ADM-AL30 provides one HDMI connector for connection to an external monitor.

![19 17\n3 1\n18\n4 2](.adm-al30-50m-41056-1000-10/1471dc7107c09b9bead63ee5172d3681251d8a5a0a608cbd8aee21520757be13.jpg)

<table><tr><td>Pin #</td><td>Signal</td><td>Pin #</td><td>Signal</td></tr><tr><td>1</td><td>CON_HDMI_TX2_P</td><td>2</td><td>GND</td></tr><tr><td>3</td><td>CON_HDMI_TX2_N</td><td>4</td><td>CON_HDMI_TX1_P</td></tr><tr><td>5</td><td>GND</td><td>6</td><td>CON_HDMI_TX1_N</td></tr><tr><td>7</td><td>CON_HDMI_TX0_P</td><td>8</td><td>GND</td></tr><tr><td>9</td><td>CON_HDMI_TX0_N</td><td>10</td><td>CON_HDMI_CLK_P</td></tr><tr><td>11</td><td>GND</td><td>12</td><td>CON_HDMI_CLK_N</td></tr><tr><td>13</td><td>N/C</td><td>14</td><td>N/C</td></tr><tr><td>15</td><td>DVI_SCL_SINK</td><td>16</td><td>DVI_SDA_SINK</td></tr><tr><td>17</td><td>GND</td><td>18</td><td>P_+5V0_HDMI_CN</td></tr><tr><td>19</td><td>CON_HDMI_HPD_5V0</td><td colspan="2"></td></tr></table>

Table 3-3: HDMI Connector Pin Definition

# 3.1.7 USB 3.2 Ports

The ADM-AL30 provides four USB 3.2 Gen 2 supporting Type-A connection on the front panel. All USB 3.2 ports are compatible with SuperSpeed Gen2, high-speed, full-speed, and low-speed USB devices. USB1 and USB2 Provide 1.6A current each, and USB3,4 share 1.6A current. The full 1.6A current is available if only one port is used.

# 3.1.8 DC Power Input

9-36V DC
![1\n2\n3\n4\n5\n6.40\nM3](.adm-al30-50m-41056-1000-10/848a4ef7cc92f5392bc0fe31f0970389f38fa62354a9785684bf4d744286efa8.jpg)

Figure 3-3: DC Power Input

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>V+ (DC IN)</td></tr><tr><td>2</td><td>V+ (DC IN)</td></tr><tr><td>3</td><td>V- (GND)</td></tr><tr><td>4</td><td>V- (GND)</td></tr><tr><td>5</td><td>Ignition</td></tr></table>

Table 3-4: DC Power Input Pin Definition

Use an approved power source as certified by IEC or UL. If you need an adaptor, optional accessories or further assistance, contact ADLINK for further information. The maximum operational altitude is 2000 m with an output that meets LPS and SELV (ES1) circuits.

![The image displays a digital icon of a document. It features a white sheet of paper with a black outline and a folded top-left corner. Faint horizontal lines run across the paper. A large, bold red checkmark is superimposed over the document, slanting from the top right to the bottom left.](.adm-al30-50m-41056-1000-10/f33e325c09b2c272276e6c910ded21cf06fa04d52844a6b9a8a30a443bd95ac8.jpg)
NOTE:

A switch must be used on the V+/Ignition pins if the supplied PWR test cable is not used.

![Close-up of a black and red electrical connector with green terminal connectors (no text or symbols visible)](.adm-al30-50m-41056-1000-10/a5b39e872c0296b8fb93b5d0b61b07d39a55c0b832252c24bedd423a2c9b099d.jpg)

# Power Source Rating

<table><tr><td></td><td>Voltage</td><td>Current</td></tr><tr><td>DC Power Source</td><td>9 to 36V DC</td><td>8.75 to 30A</td></tr><tr><td>AC-to-DC Adapter</td><td>24V DC</td><td>18.75A</td></tr></table>

![The image displays a warning sign. It features a dark red, equilateral triangle with a black border. Inside the triangle is a white exclamation point. Below the triangle, the text 'WARNING:' is written in black capital letters.](.adm-al30-50m-41056-1000-10/65c69705f71d6c7e5deeaaf09e20ea9b05ac9ca1c54b9517433a5c722472c541.jpg)

Before providing DC power, ensure the voltage and polarity provided are compatible with the DC input. Improper input voltage and/or polarity can cause system damage.

AVERTISSEMENT: Avant de fournir de l'énergie DC à cet appareil, veuillez vous assurer que la tension et la polarité fournies sont compatibles avec l'entrée DC. Une tension d'entrée et/ou polarité incorrectes peuvent causer des dommages au système.

# Power Consumption

<table><tr><td>Idle Mode (EIST Disabled)</td><td>With NVIDIA GPU</td><td>Without NVIDIA GPU</td></tr><tr><td>24V Input</td><td>2.63 A</td><td>1.86 A</td></tr><tr><td>Power Consumption</td><td>63.12 W</td><td>44.64 W</td></tr></table>

<table><tr><td>Load Mode(EIST Disabled)</td><td>WithNVIDIA GPU</td><td>WithoutNVIDIA GPU</td></tr><tr><td>24V Input</td><td>8.51 A</td><td>4.30 A</td></tr><tr><td>Power Consumption</td><td>204.24 W</td><td>103.20 W</td></tr></table>

<table><tr><td>Idle Mode(EIST Disabled)</td><td>WithNVIDIA GPU</td><td>WithoutNVIDIA GPU</td></tr><tr><td>12V Input</td><td>5.24 A</td><td>3.78 A</td></tr><tr><td>Power Consumption</td><td>62.88 W</td><td>45.36 W</td></tr></table>

<table><tr><td>Load Mode(EIST Disabled)</td><td>WithNVIDIA GPU</td><td>WithoutNVIDIA GPU</td></tr><tr><td>12V Input</td><td>17.35 A</td><td>8.56 A</td></tr><tr><td>Power Consumption</td><td>208.20 W</td><td>102.72 W</td></tr></table>

# 3.1.9 COM Port Connectors

The ADM-AL30 provides two COM ports through DB9 connectors, supporting only RS-232 protocol.

![1\n5\n6\n9](.adm-al30-50m-41056-1000-10/b73be633f3d5266c97c3f218b37f9bfd8153fcb6837ba18db76ebfde1924610c.jpg)

Figure 3-4: COM Port Pin Definition

<table><tr><td rowspan="2">Pin</td><td>Signal Name</td></tr><tr><td>RS-232</td></tr><tr><td>1</td><td>DCD#</td></tr><tr><td>2</td><td>RXD</td></tr><tr><td>3</td><td>TXD</td></tr><tr><td>4</td><td>DTR#</td></tr><tr><td>5</td><td>GND</td></tr><tr><td>6</td><td>DSR#</td></tr><tr><td>7</td><td>RTS#</td></tr><tr><td>8</td><td>CTS#</td></tr><tr><td>9</td><td>RI#</td></tr></table>

Table 3-5: DB9 Pin Definitions

# 3.1.10 SATA Connector

The SATA connector supports transfer up to 6.0Gb/s.

![Pure electrical circuit lines without any symbols](.adm-al30-50m-41056-1000-10/d529c2df678f0bd1ab620fcd494c96795890fb60ec72008951c451bce19bd712.jpg)

Figure 3-5: SATA Connector

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>GND</td></tr><tr><td>2</td><td>TXP</td></tr><tr><td>3</td><td>TXN</td></tr><tr><td>4</td><td>GND</td></tr><tr><td>5</td><td>RXN</td></tr><tr><td>6</td><td>RXP</td></tr><tr><td>7</td><td>GND</td></tr></table>

Table 3-6: SATA Connector Pin Definition

# 3.1.11 M12 Connector for 10GbE

![5\n4\n3\n6\n7\n2\n8\n1](.adm-al30-50m-41056-1000-10/d1cfeb1d87bd30ba1867f7d6da0965da53007850037f8fa128f961e7c2c621dd.jpg)

Figure 3-6: M12 Connector for 10GbE

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>X710_1_MDI1_T_DP0</td></tr><tr><td>2</td><td>X710_1_MDI1_T_DN0</td></tr><tr><td>3</td><td>X710_1_MDI1_T_DP1</td></tr><tr><td>4</td><td>X710_1_MDI1_T_DN1</td></tr><tr><td>5</td><td>X710_1_MDI1_T_DP3</td></tr><tr><td>6</td><td>X710_1_MDI1_T_DN3</td></tr><tr><td>7</td><td>X710_1_MDI1_T_DN2</td></tr><tr><td>8</td><td>X710_1_MDI1_T_DP2</td></tr></table>

Table 3-7: M12 Connector Pin Definition

# 3.1.12 1GbE BASE-T1 Connector (2x3)

![1\n2\n3\n4\n5\n6\n7\n8\n9\n10\n11\n12](.adm-al30-50m-41056-1000-10/37acd4bd081dfa5a92b5b4d30d0759958930f9e8f16943ea7818cf4c46a4de9e.jpg)

Figure 3-7: 1GbE Base-T1 Connector (2x3)

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>ETH1_MDI_CONN_P</td></tr><tr><td>2</td><td>ETH1_MDI_CONN_N</td></tr><tr><td>3</td><td>ETH2_MDI_CONN_P</td></tr><tr><td>4</td><td>ETH2_MDI_CONN_N</td></tr><tr><td>5</td><td>ETH3_MDI_CONN_P</td></tr><tr><td>6</td><td>ETH3_MDI_CONN_N</td></tr><tr><td>7</td><td>ETH4_MDI_CONN_P</td></tr><tr><td>8</td><td>ETH4_MDI_CONN_N</td></tr><tr><td>9</td><td>ETH5_MDI_CONN_P</td></tr><tr><td>10</td><td>ETH5_MDI_CONN_N</td></tr><tr><td>11</td><td>ETH6_MDI_CONN_P</td></tr><tr><td>12</td><td>ETH6_MDI_CONN_N</td></tr></table>

Table 3-8: 1GbE Base-T1 Connector (2x3) Pin Definition

# 3.1.13 1GbE BASE-T1 Connector (1x2)

![1\n4](.adm-al30-50m-41056-1000-10/ab370f30bbb3c2f848bc9134e8b8714f4a07a7a44cdeeea218f59cf9db73f2ec.jpg)

Figure 3-8: 1GbE Base-T1 Connector (1x2)

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>ETH7_MDI_CONN_P</td></tr><tr><td>2</td><td>ETH7_MDI_CONN_N</td></tr><tr><td>3</td><td>ETH8_MDI_CONN_P</td></tr><tr><td>4</td><td>ETH8_MDI_CONN_N</td></tr></table>

Table 3-9: 1GbE Base-T1 Connector (1x2) Pin Definition

# 3.1.14 CMC Connector

![3D technical illustration of a rectangular electronic component with labeled pins (A–M) and mounting points, no readable text or symbols beyond part numbers.](.adm-al30-50m-41056-1000-10/8611368ce7ee618a617eaafef68a80dc2248fc9e9540e26c907d42aeb5854a09.jpg)

Figure 3-9: CMC Connector

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>A4</td><td>Ground</td><td>J3</td><td>CAN-FD6_L</td></tr><tr><td>B4</td><td>CAN-FD1_H</td><td>K3</td><td>Ground</td></tr><tr><td>C4</td><td>CAN-FD1_L</td><td>A2</td><td>Ground</td></tr><tr><td>D4</td><td>Ground</td><td>B2</td><td>CAN-FD7_H</td></tr><tr><td>E4</td><td>CAN-FD2_H</td><td>C2</td><td>CAN-FD7_L</td></tr><tr><td>F4</td><td>CAN-FD2_L</td><td>D2</td><td>Ground</td></tr><tr><td>G4</td><td>Ground</td><td>E2</td><td>CAN-FD8_H</td></tr><tr><td>H4</td><td>CAN-FD3_H</td><td>F2</td><td>CAN-FD8_L</td></tr><tr><td>J4</td><td>CAN-FD3_L</td><td>G2</td><td>Ground</td></tr><tr><td>K4</td><td>Ground</td><td>H2</td><td>CAN1H</td></tr><tr><td>A3</td><td>Ground</td><td>J2</td><td>CAN1L</td></tr><tr><td>B3</td><td>CAN-FD4_H</td><td>K2</td><td>Ground</td></tr><tr><td>C3</td><td>CAN-FD4_L</td><td>L4</td><td>CAN2H</td></tr><tr><td>D3</td><td>Ground</td><td>M4</td><td>CAN2L</td></tr><tr><td>E3</td><td>CAN-FD5_H</td><td>L3</td><td>CAN3H</td></tr><tr><td>F3</td><td>CAN-FD5_L</td><td>M3</td><td>CAN3L</td></tr><tr><td>G3</td><td>Ground</td><td>L2</td><td>CAN4H</td></tr><tr><td>H3</td><td>CAN-FD6_H</td><td>M2</td><td>CAN4L</td></tr></table>

Table 3-10: CMC Connector Pin Definition

# 3.1.15 USB 2.0 Connector

One USB 2.0 Type-A connector is provided on the mainboard for internal USB dongle.

![4\n3\n2\n1](.adm-al30-50m-41056-1000-10/beaa19bed07d8fbb251e4e87a2316c822b150d368cf9b27bba2340fdffe09d33.jpg)

Figure 3-10: USB Port

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>Vcc</td></tr><tr><td>2</td><td>Data-</td></tr><tr><td>3</td><td>Data+</td></tr><tr><td>4</td><td>GND</td></tr></table>

Table 3-11: USB Port Pin Definition

# 3.1.16 Cable Connectors

# 2x 10GbE

 M12 Connector: Amphenol MSXS-08BMMM-SL7X01
 10GbE to RJ45 cable (ADLINK PN: 30-01322-0020-A0)

![The image displays a close-up of a silver metallic connector, likely an F-type coaxial connector used for cable or satellite connections. It features a threaded outer shell and a hollow center containing a visible central pin. The background is plain and light-colored. There is no text visible in the image.](.adm-al30-50m-41056-1000-10/93872f1f1d5af16dfe9724bbe520589ed245a9d7d51643eaa9c2cc95cdb98db7.jpg)

![1000±20\nP1\n①\n②\nP2\n1\n8](.adm-al30-50m-41056-1000-10/011b7430c2f14e00e0e223ecb1f2eca9ebf9dc9f0c860ca7f781f74bf13b81cd.jpg)

# 8x 1GbE Base-T1

2x3 port: TE 2339800-1 (Code A, with compatible parts suggested on website)
1x2 port: TE 2305987-1 (Code A, with compatible parts suggested on website)

![Close-up of a black plastic electronic component with internal slots and mounting pins (no visible text or symbols)](.adm-al30-50m-41056-1000-10/fce46fa2c66fe0017eeb976a6c789b7b30e9c6e13cd1a2f485b9905977090564.jpg)

![3D rendering of a black rectangular electronic device with two internal ports (no text or symbols visible)](.adm-al30-50m-41056-1000-10/2483f042472b2d71fd527a944898634c5bcb5be517be48d932d496937455ba63.jpg)

# CAN (4x CAN 2.0 and 8x CAN FD), part of the CMC connector

 CMC header: Molex 477320361
 Compatible receptacle: Molex 643202311

![Close-up of a black plastic electrical connector with internal circuitry (no visible text or symbols)](.adm-al30-50m-41056-1000-10/aa0c79bf71df58e695fa4cb3b104f7d925895bc4d492f61fd227014aa2119046.jpg)

![Close-up of a black plastic electrical connector with multiple slots and red connectors (no visible text or symbols)](.adm-al30-50m-41056-1000-10/ff59f1a6d03f6db0f05177934e6bb94f535705a07570ffe88fac2dc36fe809d4.jpg)

# Power

Optional 450W AC-DC power adapter: (ADLINK P/N : 31- 62192-0000-A0)
 Power cable and ignition switch: included in the accessory box (ADLINK P/N 30-22128-0000-A0)

![Close-up of a black and red electrical connector with green connectors, placed on a wooden surface (no text or symbols visible)](.adm-al30-50m-41056-1000-10/c208632b4ce687cc69f276495b9b5b22640bdb60a706a65c7097036d7d1d90fd.jpg)

 Terminal block compatible with ADM-AL30 power connector: Dinkle EC762VM-05P (ADLINK P/N : 20-C2049-1050)

![Green plastic electrical connector with multiple slots and terminal holes (no text or symbols visible)](.adm-al30-50m-41056-1000-10/b350ad8bcb163351319397f228b652b577e0f002eadc0d2ebd11ef23151313c6.jpg)

# 3.1.17 M.2 Locations Main Board Top Side:

1x M.2 2280, M-key, PCIe Gen3 x4 |SATA (automatic detection for NVMe/SATA OS drive).

![Close-up of a green printed circuit board with visible components and connectors (no readable text or symbols)](.adm-al30-50m-41056-1000-10/333a006f259125b9188bac30b8bfe2c1d051e8ed69d82829aae9785c801e3a14.jpg)

Figure 3-11: M.2 Main Board Top Side

The M.2 M-key slot is a combination NVMe/SATA slot for installing the OS. Signal is controlled via a TI mux. When NVMe drive is used, it uses full PCIe Gen3 x4 bandwidth (1 lane pass-thru via the mux, 3 lanes straight from PCH).

![Based on the provided image, here is the description of the flowchart:\n\n**Labeled Blocks:**\n*   **DDR5 SO-DIMM 1~4 2 DIMM - 3600** (Orange block, top left)\n*   **DP 1 CN** (Yellow block, below DDR5 block)\n*   **Processor Alder Lake S 35W/65W** (Blue block, top right)\n*   **M.2 M-Key Conn. 2280 (NVMe/SATA)** (Orange block, middle left)\n*   **MUX TMUXHS4212** (Cyan block, bottom center)\n*   **DMI x8 Gen 4** (Text associated with the dashed connection to the bottom-right blue area)\n\n**Connections:**\n*   **DDR5 SO-DIMM...** connects to **Processor...** with lines labeled: 'CH0, 1', 'DDI-C (RVP)', and 'DDI-E (RVP)'.\n*   **Processor...** connects to **DP 1 CN** with a line labeled: 'DP 1 CN'.\n*   **Processor...** connects to the bottom-right blue area with a dashed vertical line labeled: 'DMI x8 Gen 4'.\n*   The bottom-right blue area connects to **MUX...** with lines labeled: 'PCIe gen3 x3', 'PCIe gen3 x1', and 'SATA'.\n*   **MUX...** connects to **M.2 M-Key Conn...** with a line labeled: 'PCIe/SATA'.](.adm-al30-50m-41056-1000-10/eb78ccf16d40f67fcd51db894e7ca627c5202a94b53f477d9b7ddf965943e900.jpg)

# Main Board Bottom Side:

1x M.2 2230, E-key, PCIe Gen3 x1 (for Wi-Fi/BT module).

![Close-up of a green printed circuit board with an LGA-1700 38N2 chip and multiple electronic components (no readable text or symbols)](.adm-al30-50m-41056-1000-10/c91d77e83b58698a26a834868cd16e8b8fd9aacd6dd425e782a24aafbd8734e9.jpg)

Figure 3-12: M.2 Main Board Bottom Side

# Backplane:

M2M1/M2M2: 2x M.2 2280, M-key, PCIe Gen3 x2 (for optional CAN FD modules).

![ADLINK\n51-33327-0A20\nS/N\nMOM1\nMOM2\nADLINK\n51-33327-0A20\nS/N\nCE\nCF\nCE\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCF\nCP 1498 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600 160(nl)](.adm-al30-50m-41056-1000-10/63699c9528310182e0f71695184bd3d8a206572c2c3a1f4ce2322107f3b5d945.jpg)

Figure 3-13: M.2 Backplane

This page intentionally left blank.

# 4 Getting Started

# 4.1 SSD Removal

To remove SSD, follow the steps below.

1. Remove the 5 thumb screws.

![ASP+\nPowering 52 ADLINK\n2.5'\nOSS435](.adm-al30-50m-41056-1000-10/83ad483acdef979e19194149132d9bc068d8aae2906e27ac24ee20181c0b6ae8.jpg)

# 2. Lift the latch.

![Lift the Latch](.adm-al30-50m-41056-1000-10/afc11eca51cbce8ac501da321a5e8bc3fff3140dac92b3cded1579c185f21c00.jpg)

# 3. Remove the SSD module with upward motion.

![Close-up of a hand inserting an AMD processor into a laptop motherboard, showing internal circuit and components (no text or symbols visible)](.adm-al30-50m-41056-1000-10/ae955437b4df201f537ae1e270042e028b855bdb11c912fb2f09249d034f97b6.jpg)

# 4.2 Driver Installation

Note that Marvell 88Q6113 configuration is not covered in this manual. For details regarding switch configuration, refer to the user’s manual and other technical documents directly from Marvell Customer Portal.

User registration is required: https://marvell-customers.okta.com/ app/adobe\_cq/exk4imp61Axt6uagx4x6/sso/saml

ADLINK also maintains a list of technical notes regarding 88Q6113 applications, which will be updated in this manual as needed.

# 4.2.1 Marvell 88Q6113 Driver Installation

1. Download Marvell driver from ADLINK Github.
2. Command: cd marvell\_switch\_pcie\_driver\_gpl2- ubuntu22.04
3. cd src
4. make clean
5. make all
6. lspci | grep 0f13 // you should see “Ethernet controller: Marvell Techology Group Ltd. Device 0f13 (rev 01).” If note, restart the computer and continue from Step 4.
7. Sudo insmod oak\_pci.ko debug=0x00 chan=10 txs=32 rxs=32 rto=100 mhdr=0 jumbo=1
8. sudo dmesg | grep –A 8 “Marvell PCIe Switch Driver” #Can use this command to verify if the MAC Address has been successfully changed.

# 4.2.2 PEAK CAN Driver Installation

For Ubuntu, PEAK CAN driver is already included. To check the status of PEAK CAN module, run the following command: sudo lspci | grep -i peak07:00.0 Network controller: PEAK-System Technik GmbH Device 001a (rev 01)

# 4.2.3 Fintek CAN 2.0 Driver Installation

For Ubuntu, Fintek driver is not included by default.

Download driver for Ubuntu 22.04.3 from here: Fintek USB to CAN 2.0 A/B (F81604).

Link to USB to CAN 2.0 A/B (F81604) Linux version at the bottom of the page.

Also need to download dependencies from official repository.

# 4.3 Marvell Ethernet Switch Reset Workaround

Some settings such as TCAM, VLAN, and ATU, written via Marvell’s “developmentcfg” tool, are reset after the power is turned off and on.

As a work-around, Marvell has provided additional tools to address this issue. Although this is a more complicated process, the desired settings are retained to ensure safety and smooth system operation.

These are the necessary utilities: “ASCT Windows version”, “Create\_secure\_image\_tool”, “Flash\_path\_tool”, and “Download-Image”. All files can be obtained directly from Marvell Customer Portal.

1. Prepare a Windows-based computer; this will be used as a client to connect and config the Marvell chip.
2. Prepare a RJ45-to-BaseT1 converter to connect ADM-AL30 to the client computer.
3. Download the original 88Q6113 firmware “88Q6113\_flash.bin” from Marvell ‘s portal.
4. On the Windows computer, generate a new “config.xml” file using ASCT; this XML contains all the desired set-

tings and modifications. Then export the config as a bin file “config.bin”.

5. Combine #1 & #2 above into a new single bin file “complete\_fw.bin” using “Create\_secure\_image\_tool”.
6. Then, use “Flash\_path\_tool” to modify the MAC address of the new bin file “complete\_fw.bin” to match the onboard MAC address sticker.
7. Finally, use “DownloadImage” to burn the newly created bin file unto the Marvell chip. Once finished, power-cycle the system for the new settings to take effect

![Here is an accurate and concise description of the flowchart:\n\n**Labeled Blocks:**\n*   'Automotive Switch Config Tool (ASCT)' (grey rounded rectangle)\n*   'config.xml' (black oval)\n*   'Complete FW in Flash' (yellow rounded rectangle acting as a container)\n    *   'Configuration' (pink rectangle with a red border, inside the yellow container)\n    *   '88Q6113 FW' (purple rectangle, inside the yellow container)\n        *   'MAC' (small blue square, inside the purple rectangle)\n*   'Update configuration only' (blue text label associated with an arrow)\n*   'Past' (large black text)\n*   'One tool: ASCT' (black text)\n*   'p.s. MAC Address is write-protected against modification through ethernet' (red text at the bottom)\n\n**Connections:**\n*   A black arrow points from 'Automotive Switch Config Tool (ASCT)' to the 'Configuration' block.\n*   A black arrow points from 'Automotive Switch Config Tool (ASCT)' to the 'config.xml' oval.](.adm-al30-50m-41056-1000-10/422750fda98e18a777e7ca487d680b7f44b64ce88749bea680cc24ac56adaad6.jpg)

![The diagram illustrates a firmware update process involving several tools and binary files.\n\n**Top Section (Update Process):**\n*   An oval block labeled **'Download Image Tool'** connects via an arrow labeled **'Update complete FW'** to a large yellow box labeled **'Complete FW in Flash'**.\n*   Inside the 'Complete FW in Flash' box are stacked blocks labeled **'Configuration'** and **'88Q6113 FW'**, with a small blue block labeled **'MAC'** attached to the firmware block.\n\n**Bottom Section (File Composition):**\n*   A squiggly arrow connects the **'Download Image Tool'** to a block labeled **'complete_fw.bin'**.\n*   This block is part of an equation: **'complete_fw.bin'** equals **'config.bin'** plus **'88Q6113_flash.bin'**.\n    *   Under **'config.bin'**: The text reads **'Generate by ASCT through config.xml'**.\n    *   Under **'88Q6113_flash.bin'**: The text reads **'Download from Marvell Customer Portal'**.\n    *   Under **'complete_fw.bin'**: The text reads **'merge by create_secure_image then modify MAC address by flash_path_tool'**.\n\n**Right Side and Footer:**\n*   Text on the right reads **'Now'** followed by a list: **'Four tools: Download_image_tool, create_secure_image_tool, ASCT, flash_path_tool(optional.)'**.\n*   Red text at the bottom reads: **'p.s. MAC Address is write-protected against modification through ethernet; however, for validation purposes, it is recommended to modify the MAC address in the bin file to match the device.'**](.adm-al30-50m-41056-1000-10/425bf9bf32c7926be806272596260674680e33ed996203bd05d7348d4a39e6c3.jpg)

# 4.4 Marvell Ethernet Switch Speed Adjustment

To adjust the speed of the Marvell Ethernet Switch, do the following:

1. From the Marvell Customer Portal, download the data-sheet “88Q222x(M)\_88Q120xM\_Datasheet\_TD-000217-05”.

 Table 87, page 108, lists the speed settings for 88Q6113.
 Port auto negotiation is disabled by default.
 Default configuration is listed in “al30\_cfg.xml”.

# Auto-Negotiation

Theoptional Auto-Negotiationis basedon Clause98ofte IEEE802:3 specification.Itis used to negotiate speedandmaster/slave.

Auto-Negotiation isdisabledbydefault,itcanbe enabled via register7.02oo.12.When Auto-Negotiation isdisabled,the speed defaultsto strapped valueon RXD[3]pin.When Auto-Negotiationisenabled,theabilitiesthatareadvertisedcanbechanged viaregisters7.0202to 7.0204.Changes totheseregistersdonot takeeffect unless oneof the following occurs:

Thereisasoftwarereset(1.0900.15,3.000.15,or7.0200.15).
ARestart Auto-Negotiation isasserted (7.0200.9).

2. To change the settings:

 Smi address 0x0001 = PHY1 (mapped to switch port 1)
 Value 0xC001 = Master mode, Speed 1000

```xml
&lt;phy_operation&gt;
    &lt;op_name&gt;Set speed and mode&lt;/op_name&gt;
    &lt;smi_address&gt;0x0001&lt;/smi_address&gt;
    &lt;smi_external&gt;true&lt;/smi_external&gt;
    &lt;offset&gt;0x0834&lt;/offset&gt;
    &lt;value&gt;0xC001&lt;/value&gt;
    &lt;clause&gt;0x002D&lt;/clause&gt;
    &lt;smi_device&gt;0x0001&lt;/smi_device&gt;
&lt;/phy_operation&gt;
```

3. The parameters must be set in the firmware before uploading it onto 88Q6113.
4. To do this, copy the original firmware "88Q6113\_flash.bin" from "88Q6113\_fw\_bin" directory to "flash\_patch\_tool" directory.
5. Then, copy 88Q6113\_flash.bin in "flash\_patch\_tool" to "create\_secure\_image" directory.
6. Using AutomotiveSwitchV4.exe’s “GUI Mode,” convert the switch configuration from .xml to .bin.

 Go to File> Load Configuration, choose your switch config .xml. Then click "Runtime Operation Settings" and check that the configurations have been loaded. Go to Commands > Export Configuration to File, where config.bin will be generated.

 Make sure to use GUI Mode, otherwise the contents of the .bin file may be different than required.

7. Copy config.bin under "automotive\_switch\_config\_win" to "create\_secure\_image" directory.

8. Use create\_secure\_image\_v3.exe to merge the configuration (config.bin) with the original firmware (88Q6113\_flash.bin) into a new bin file.

 create\_secure\_image\_v3.exe -imagefile=88Q6113\_flash.bin -partitionoffset=0x0B0000 -partitionsize=0x090000 -cfgimagefile=al30\_cfg.bin - acceptanycfg

9. Copy 88Q6113\_flash.bin to "flash\_patch\_tool" directory.

10.Use patch\_image.exe to change the MAC address within.

 This MAC address will not be loaded, just need to match the current MAC Address on 88Q6113, current MAC address can be checked by executing the Patch Image application in "flash\_patch\_tool" directory.
 patch\_image.exe -fwimage=88Q6113\_flash.bin -aesgen=2 -devicenum=0xf -macaddress=00:30:64:00:11:22 -show

11.Copy 88Q6113\_flash.bin to "DownloadImage\_v2.08.0001" directory.

12.Use DownloadImage\_v2.exe to upload the firmware via Ethernet by executing the following three commands.

 DownloadImage\_v2 -ha34-73-5A-F6-87-59 - if88Q6113\_flash.bin -dt2 -io0x100000 -is0x40000 -da00- 30-64-00-11-22 -dn15
 DownloadImage\_v2 -ha34-73-5A-F6-87-59 - if88Q6113\_flash.bin -dt1 -io0x0C0000 -is0x40000 - da00-30-64-00-11-22 -dn15
 DownloadImage\_v2 -ha34-73-5A-F6-87-59 - if88Q6113\_flash.bin -dt3 -io0x0B0000 -is0x4000 -da00- 30-64-00-11-22 -dn15

This page intentionally left blank.

# Appendix A BIOS Setup

The Basic Input/Output System (BIOS) is a program that provides a basic level of communication between the processor and peripherals. In addition, the BIOS also contains codes for various advanced features applied to the ADM-AL30. The BIOS Setup program includes menus for configuring settings and enabling features of the ADM-AL30. Most users do not need to use the BIOS Setup program, as the ADM-AL30 ships with default settings that work well for most configurations.

Enter BIOS Setup by selecting DEL when the system is powered on the POST (Power On Self Test) message is displayed.The ADM-AL30 supports one-time Boot Menu allowing selection of boot device. Enter the Boot Menu by selecting F7 at POST.

![The image shows a white document icon with a folded top-right corner and faint horizontal lines. A large, bold red checkmark is superimposed over it, extending diagonally from the bottom left to the top right.](.adm-al30-50m-41056-1000-10/64b45c9312f30bde5abaf1e31404dd44c72c4d01f52595e1501e892837f6b2bd.jpg)
NOTE:

 BIOS options listed are for reference only.
 Different configurations can affect BIOS behavior.
Displayed material may reflect only the BIOS version corresponding to initial release and may differ from that of the purchased motherboard.

# 5.1 Menu Structure

This section presents the six primary menus of the BIOS Setup Utility. Use the following table as a quick reference for the contents of the BIOS Setup Utility. The subsections in this section describe the submenus and setting options for each menu item. The default setting options are presented in bold, and the function of each setting is described in the right hand column of the respective table.

<table><tr><td>Main</td><td>Advanced</td><td>Chipset</td></tr><tr><td>BIOS InformationSystem InformationSystem DateSystem Time</td><td>►CPU Configuration►Power Management►Serial Port Console Redirection►USB Configuration►Trusted Computing►Onboard Devices Configuration►NCT6126D Hardware Monitor►BIOS Watchdog Timer</td><td>►System Agent (SA) Configuration►PCH-IO Configuration►BackPlane PCIe ConfigurationHoldoff timer</td></tr></table>

<table><tr><td>Security</td><td>Boot</td><td>Save &amp; Exit</td><td>MeBx</td></tr><tr><td>Password DescriptionSecure Boot Menu</td><td>Boot Configuration</td><td>Save OptionsDefault OptionsBoot Override</td><td>Intel® ME Password</td></tr></table>

► indicates a submenu, gray text indicates info only.

# 5.2 Main

Contains basic system information for the ADM-AL30.

![The image displays a standard warning symbol. It features a red triangle with a thick black border containing a white exclamation point in the center. Below the triangle is the word 'WARNING' in white capital letters.](.adm-al30-50m-41056-1000-10/94bbd952ebe258054c0d9d4ee7432dc2198b9700abea08762ee455009073550c.jpg)

Changing BIOS settings may lead to incorrect controller behavior and possible inability to boot.

# BIOS Information

Shows current system BIOS Vendor, BIOS Version, Build Date, MRC Version, GOP Version and ME FW Version.

# System Information

Shows current system Project Name, FM Board ID, FM Board Information, CPU Board Version, CPU Branding String, CPU Frequency, Total Memory, Memory Frequency, and PCH SKU.

# System Time/System Date

Allows adjustment of system time and date, as follows.

1. Highlight System Time or System Date using the up and down &lt;Arrow&gt; keys.
2. Enter new values using the keyboard and select &lt;Enter&gt;.
3. Select &lt; Tab &gt; to move between fields.

![The image displays a white document icon with a folded top-left corner. Horizontal gray lines run across the document, suggesting text or a list. A large, bold red checkmark is superimposed over the document, extending diagonally from the bottom left to the top right.](.adm-al30-50m-41056-1000-10/bac6604213a8dd8f9d2101c16a24118b2cbf6ef5875f8bbca249bb09d845558e.jpg)
NOTE:

The date must be entered in MM/DD/YY format, and the time in HH:MM:SS. The time is in 24-hour format. For example, 5:30 A.M. appears as 05:30:00, and 5:30 P.M. as 17:30:00.

# 5.3 Advanced

<table><tr><td>Feature</td><td>Options</td></tr><tr><td>CPU Configuration</td><td>submenu</td></tr><tr><td>Power Management</td><td>submenu</td></tr><tr><td>Serial Port Console Redirection</td><td>submenu</td></tr><tr><td>USB Configuration</td><td>submenu</td></tr><tr><td>Trusted Computing</td><td>submenu</td></tr><tr><td>NCT6126D Hardware Monitor</td><td>submenu</td></tr><tr><td>BIOS Watchdog Timer</td><td>submenu</td></tr><tr><td>Intel(R) Ethernet NetworkAdapter X710-TL – XX: XX: XX:XX: XX:XX</td><td>submenu</td></tr></table>

![The image displays a standard warning sign featuring a yellow equilateral triangle with a black border. Inside the triangle is a large black exclamation point. Below the triangle, the word 'CAUTION' is printed in black, uppercase letters on a white background.](.adm-al30-50m-41056-1000-10/e6e2c94a7a8c8500cd9457cf811bc6cbdde654d13213d4f686948292c2b74029.jpg)

Setting incorrect or conflicting values in Advanced BIOS Setup may cause system malfunction.

Accesses advanced options of the ADM-AL30.

# 5.3.1 CPU Configuration

# Active Performance-cores

Number of P-cores to enable in each processor package. Note: Number of Cores and E-cores are looked at together. When both are {0,0}, Pcode will enable all cores.

# Active Efficient-cores

Number of E-cores to enable in each processor package. Note: Number of Cores and E-cores are looked at together. When both are {0,0}, Pcode will enable all cores.

# Intel (VMX) Virtualization Technology

When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology.

# Hyper-Threading

Enabled for Windows and Linux (optimized for Hyper-Threading Technology) and Disabled for other OS (not optimized for Hyper-Threading Technology). When Disabled only one thread per enabled core is enabled.

# Intel Trusted Execution Technology

Enables utilization of additional hardware capabilities provided by Intel(R) Trusted Execution Technology. Changes require a full power cycle to take effect.

# C States

Enable/Disable CPU Power Management. Allows CPU to go to C states when it is not 100% utilized.

# TCC Activation Offset

Offset from factory set TCC activation temperature at which the Thermal Control Circuit must be activated. TCC will be activated at: TCC Activation Temp - TCC Activation Offset. TCC Activation Offset range is 0 to 63.

# 5.3.2 Power Management

# State After G3

Specifies the state to go to when power is re-applied after a power failure (G3 state).

# RTC Wake system from S5

Enable or disable System wake on alarm event. Select FixedTime for the system to wake at the hr::min::sec specified. Select DynamicTime for the system to wake at the current time + Increase minute(s).

# PCIe Wake

Enables/disables PCI Express wake capability.

# 5.3.3 Serial Port Console Redirection

# COM1

# Console Redirection

Enables/disables SIO COM1 Console Redirection.

# Console Redirection Settings

Specify how the host computer and the remote computer (in use) exchange data. Both computers should have the same or compatible settings.

# 5.3.4 USB Configuration

# USB Mass Storage Driver Support

Enables/disables USB mass storage driver support.

# USB transfer time-out

The time-out value for Control, Bulk, and Interrupt transfers.

# Device reset time-out

USB mass storage device Start Unit command time-out.

# Device power-up delay

Maximum time the device will take before it properly reports itself to the Host Controller, where Auto uses default value for Root port 100ms, and for Hub port the delay is taken from Hub descriptor.

# 5.3.5 Trusted Computing

# Security Device Support

Enables/disables BIOS support for security device. OS will not show Security Device. TCG EFI protocol and INT1A interface will not be available.

# SHA256 PCR Bank

Enables/disables SHA256 PCR Bank.

# Pending Operation

Schedules Operation for the Security Device. Computer will reboot during restart in order to change State of Security Device.

# Platform Hierarchy

Enables/disables Platform Hierarchy.

# Storage Hierarchy

Enables/disables Storage Hierarchy.

# Endorsement Hierarchy

Enables/disables Endorsement Hierarchy.

# Physical Presence Spec Version

Directs OS to support PPI Spec Version 1.2 or 1.3. Some HCK tests may not support 1.3.

# PH Randomization

Enables or Disables Platform Hierarchy randomization. DO NOT ENABLE THIS QUESTION IN PRODUCTION PLATFORMS. THIS IS FOR DEVELOPMENT TESTING. OVERRIDE Change-PlatformAuth ELINK for production platforms supporting TXT.

# 5.3.6 NCT6126D HW Monitor

Displays CPU/Board Temperatures, System/Backplane fan speeds, and various Voltages.

# System Fan Control Mode

Configures fan control mode from Manual Mode, Auto Mode, and SMART FAN IV.

# Manual Mode

Allows configuration of a set fan duty cycle.

# Auto Mode

Fan runs at automatic speed for optimal thermal solution.

# SMART FAN IV

Four temperatures and four fan duties can be user-configured.

# 5.3.7 BIOS Watchdog Timer

# BIOS POST Watchdog

Disable disables WatchDog Timer, Second Mode enables Watchdog Timer in second mode, Minute Mode enables Watchdog Timer in minute mode.

# 5.3.8 Intel(R) Network Adapter X710-TL

# LLDP

Enables/disables LLDP.

# 5.4 Chipset

![The image displays a standard warning symbol consisting of a red triangle containing a white exclamation point. Below the triangle is the text 'WARNING:' in black, bold, capital letters.](.adm-al30-50m-41056-1000-10/bd6739f62c720c7abf58b0923c9f3fc27a625ea70cf03fb0fc9ab6a686a23ff5.jpg)

Setting incorrect or conflicting values in Chipset BIOS Setup may cause system malfunction.

# 5.4.1 System Agent (SA) Configuration

# System Agent (SA) Configuration

Displays and configures VT-d capability and provides settings for Memory, Graphics, DMI/OPI configuration, and VMD setup menu.

# 5.4.1.1 Memory Configuration

# Memory Configuration

Displays memory speed, size, maker, and configuration.

# 5.4.1.2 Graphics Configuration

# Primary Display

Select which of IGFX/PEG/PCI Graphics device should be the Primary Display.

# Internal Graphics

Keeps IGFX enabled based on Setup options.

# GTT Size

Selects GTT Size.

# Aperture Size

Selects Aperture Size.

# DVMT Pre-Allocated

Selects DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphics Device.

# 5.4.1.3 DMI/OPI Configuration

# DMI/OPI Configuration

Displays DMI link speed and width.

# DMI Max Link Speed

Sets DMI Speed to Gen1/Gen2/Gen3/Gen4.

# 5.4.1.4 VMD Setup Menu

# Enable VMD Controller

Enables/disables VMD controller.

# 5.4.2 PCH-IO Configuration

# PCH-IO Configuration

Configures SATA, NVMe, VMD, and Security.

# 5.4.2.1 SATA Configuration

# SATA Mode Selection

Determines how SATA controller(s) operate.

# SATA Controller Speed

Sets maximum speed the SATA controller can support.

# SATA HDD 1

Enables/disables SATA HDD 1.

# SATA HDD 2

Enables/disables SATA HDD 2.

# M.2 SATA

Enables/disables M.2 SATA.

# 5.4.2.2 NVMe Configuration

Displays NVMe device status.

# 5.4.2.3 Security Configuration

# BIOS Lock

Enables/disables PCH BIOS Lock Enable. Required to be enabled to ensure SMM flash protection.

# 5.4.3 BackPlane PCIe Configuration

Displays BackPlane model name, slot information, speed control, and time tunings.

# PCIe Speed #1/#2

Configures PCIe Max. speed, maximum detection speed for installed device, minimum PERST# signal active time, and maximum time PCIe device must enter L0 after PERST# is deasserted.

# 5.5 Security

If only the Administrator password is set, access is limited and the password is requested upon Setup. If User password is set, it acts as a power-on password and must be entered to boot or enter setup.

# Administrator Password

Sets Administrator Password.

# User Password

Sets User Password.

# Secure Boot Menu

Configures Secure Boot.

# 5.5.1 Secure Boot Menu

# Secure Boot

Active if Secure Boot is Enabled, Platform Key (PK) is enrolled and the System is in User mode. Mode change requires platform reset.

# Secure Boot Mode

Selects from Standard or Custom. In Custom, Secure Boot Policy variables can be configured by a physically present user without full authentication.

# Key Management

Enables expert users to modify Secure Boot Policy variables without full authentication.

# 5.6 Boot

# Boot Configuration

Specifies the priority of boot devices, all of which are detected during POST and displayed. Target Boot Option # and click to select the desired device.

# Setup Prompt Timeout

Number of seconds to wait for setup activation key. The maximum value is 8.

# Bootup Num-Lock State

Sets keypad Number Lock status following boot.

Quiet Boot

<table><tr><td>Option</td><td>Description</td></tr><tr><td>Disabled</td><td>Directs BIOS to display POST messages</td></tr><tr><td>Enabled</td><td>Directs BIOS to display the OEM logo.</td></tr></table>

Fast Boot

<table><tr><td>Option</td><td>Description</td></tr><tr><td>Disable Link</td><td>Directs BIOS to perform all POST tests.</td></tr><tr><td>Enabled</td><td>Directs BIOS to skip certain POST tests to boot faster.</td></tr></table>

SATA Support

<table><tr><td>Option</td><td>Description</td></tr><tr><td>Last Boot SATA Devices Only</td><td>Only last boot SATA device will be available in Post.</td></tr><tr><td>All SATA Devices</td><td>All SATA devices will be available in OS and Post.</td></tr></table>

# VGA Support

<table><tr><td>Option</td><td>Description</td></tr><tr><td>Auto</td><td>Only install Legacy OpRom with Legacy OS and logo would NOT be shown during post.</td></tr><tr><td>EFI Driver</td><td>EFI driver will still be installed with EFI OS.</td></tr></table>

# USB Support

<table><tr><td>Option</td><td>Description</td></tr><tr><td>Disabled</td><td>All USB devices will NOT be available until after OS boot.</td></tr><tr><td>Full Initial</td><td>All USB devices will be available in OS and Post.</td></tr><tr><td>Partial Initial</td><td>USB Mass Storage and specific USB port/device will NOT be available before OS boot.</td></tr></table>

# PS2 Device Support

<table><tr><td>Option</td><td>Description</td></tr><tr><td>Disable Link</td><td>PS2 devices will be skipped.</td></tr><tr><td>Enabled</td><td>PS2 devices will not be skipped.</td></tr></table>

# Network Stack Driver Support

<table><tr><td>Option</td><td>Description</td></tr><tr><td>Disable Link</td><td>Network Stack Driver will be skipped.</td></tr><tr><td>Enabled</td><td>Network Stack Driver will not be skipped.</td></tr></table>

# Redirection Support

<table><tr><td>Option</td><td>Description</td></tr><tr><td>Disable Link</td><td>Redirection function disabled.</td></tr><tr><td>Enabled</td><td>Redirection function enabled.</td></tr></table>

# 5.7 Save & Exit

# Save Changes and Exit

Exits system setup after saving the changes.

# Discard Changes and Exit

Exits system setup without saving any changes.

# Save Changes and Reset

Resets the system setup after saving changes.

# Discard Changes and Reset

Resets system setup without saving any changes.

# Save Changes

Saves Changes so far to any of the setup options.

# Discard Changes

Discards Changes so far to any of the setup options.

# Restore Defaults

Sets all BIOS options to default settings, designed for maximum system stability but less than maximum performance. Select Restore Defaults if the computer encounters system configuration problems.

# Save as User Defaults

Saves all changes so far as User Defaults.

# Restore User Defaults

Restores user defaults to all setup options.

# Important Safety Instructions

For user safety, please read and follow all instructions, Warnings, Cautions, and Notes marked in this manual and on the associated device before handling/operating the device, to avoid injury or damage.

 Read these safety instructions carefully.
 Keep the User’s Manual for future reference.
 Read the Specifications section of this manual for detailed information on the recommended operating environment.
 It is recommended that the device be installed in Information Technology Rooms that are in accordance with Article 645 of the National Electrical Code and NFPA 75.
 To avoid electrical shock and/or damage to device:

 Keep device away from water or liquid sources.
 Keep device away from high heat or humidity.
 Keep device properly ventilated (do not block or cover ventilation openings).
 Always use recommended voltage and power source settings.
 Always install and operate device near an easily accessible electrical outlet.
 Secure the power cord (do not place any object on/over the power cord).
 Only install/attach and operate device on stable surfaces and/or recommended mountings.
 The power must be connected to a ground connection.

 If the device will not be used for long periods of time, turn off and unplug from its power source.
? Never attempt to repair the device, which should only be serviced by qualified technical personnel using suitable tools.
 A RTC battery is used to store and retain BIOS configurations.
 The device must be serviced by authorized technicians when:

 The power cord or plug is damaged
 Liquid has entered the device interior
 The device has been exposed to high humidity and/or moisture
 The device is not functioning or does not function according to the User’s Manual
 The device has been dropped and/or damaged and/or shows obvious signs of breakage

Disconnect the power supply cord before loosening the thumbscrews and always fasten the thumbscrews with a screwdriver before starting the system up
It is recommended that the device be installed only in a ventilated environment where access is:
 Restricted to qualified service personnel or users familiar with restrictions applied to the location, reasons therefor, and any precautions required
 Only afforded by the use of a tool or lock and key, or other means of security, and controlled by the authority responsible for the location
The wire of terminal block should be fixed by an authorized technician with a recommended wire range: 30-10 sol/str, wire type: Cu, torque (Lb IN.): 5.3

![Yellow triangular warning sign with black smoke symbol indicating hot weather](.adm-al30-50m-41056-1000-10/181f5893b366255936b2d638295ff553ab60a19562731c87652e4e67ded06440.jpg)

# BURN HAZARD

Hot surface! Do not touch! Touching this surface could result in bodily injury. To reduce risk, allow the surface to cool before touching.

# Consignes de Sécurité Importante

S'il vous plaît prêter attention stricte à tous les avertissements et mises en garde figurant sur l'appareil, pour éviter des blessures ou des dommages.

 Lisez attentivement ces consignes de sécurité.
 Conservez le manuel de l'utilisateur pour pouvoir le consulter ultérieurement.
 Lisez la section Spécifications de ce manuel pour des informations détaillées sur l'environnement d'exploitation recommandé.
Il est recommandé d'installer l'appareil dans des salles de technologie de l'information conformes à l'article 645 du National Electrical Code et à la NFPA 75.
 Lorsque l'installation/le montage ou la désinstallation/le retrait du périphérique est necessaire:
 Mettez l'appareil hors tension et débranchez tous les cordons/câbles d'alimentation
 TeRéinstallez tous les couvercles de châssis avant de rétablir l'alimentation
 Pour éviter les chocs électriques et/ou d’endommager l’appareil:
 Tenez l'appareil à l'écart de toute source d'eau ou de liquide.
 Tenez l'appareil à l'écart d'une forte chaleur ou d'une humidité élevée.
 Maintenez l'appareil correctement ventilé (n'obstruer ou ne couvrez pas les ouvertures de ventilation).
 Utilisez toujours les réglages de tension et de source d'alimentation recommandés.
 Installez et utilisez toujours l'appareil près d'une prise de courant facilement accessible.
 Fixez le cordon d'alimentation (ne placez aucun objet sur le cordon d'alimentation).
 Installez/fixez et utilisez l'appareil uniquement sur des surfaces stables et/ou sur les fixations recommandées.

 L'ordinateur Smart Touch est alimenté par un adaptateur ou une source CC. Veuillez vous assurer que l'adaptateur ou la source CC doit conserver la connexion à la terre s'il est doté d'une protection.

Si l'appareil ne doit pas être utilisé pendant de longues périodes, éteignez-le et débranchez-le de sa source d'alimentation
N'essayez jamais de réparer l'appareil, qui ne doit être réparé que par un personnel technique qualifié à l'aide d'outils appropriés
 Une batterie de type Lithium peut être fournie pour une alimentation de secours ininterrompue ou d'urgence.
 L'appareil doit être entretenu par des techniciens agrees lorsque:

 Le cordon d’alimentation ou la prise est endommagé(e)
 Un liquide a pénétré à l'intérieur de l'appareil.
 L'appareil a été exposé à une forte humidité et/ou de la buée.
 L'appareil ne fonctionne pas ou ne fonctionne pas selon le manuel de l'utilisateur.
 L'appareil est tombé et/ou a été endommagé et/ou présente des signes évidents de dommage.

Débranchez le cordon d'alimentation avant de desserrer les vis à oreilles et serrez toujours les vis à oreilles avec un tournevis avant de mettre le système en marche.
 Le fil du bornier doit être fixé par un technicien agréé et recommandation pour la gamme de fils : 30-10 sol/str, type de fil : Cu, couple (Lb IN.) : 5,3

![Yellow triangular warning sign with black smoke symbol indicating hot weather](.adm-al30-50m-41056-1000-10/339f2ee12a4323c3fb6693540bcb8bc7504b2103a6528822af986f5625e0c5c2.jpg)

# RISQUE DE BRÛLURES

Partie chaude! Ne touchez pas cette surface, cela pourrait entraîner des blessures. Pour éviter tout danger, laissez la surface refroidir avant de la toucher.

# Getting Service

Ask an Expert: https://www.adlinktech.com/en/Askanexpert

# ADLINK Technology, Inc.

No. 66, Huaya 1st Road, Guishan District

Taoyuan City 333, Taiwan

Tel: +886-3-216-5088

Fax: +886-3-328-5723

Email: service@adlinktech.com

# Ampro ADLINK Technology, Inc.

6450 Via Del Oro, San Jose,

CA 95119-1208, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

Fax: +1-408-600-1189

Email: info@adlinktech.com

# ADLINK Technology (China) Co., Ltd.

300 Fang Chun Rd., Zhangjiang Hi-Tech Park

Pudong New Area, Shanghai, 201203 China

Tel: +86-21-5132-8988

Fax: +86-21-5132-3588

Email: market@adlinktech.com

# ADLINK Technology GmbH

Hans-Thoma-Straße 8-10

D-68163 Mannheim, Germany

Tel: +49-621-43214-0

Fax: +49-621 43214-30

Email: emea@adlinktech.com

Please visit the Contact page at www.adlinktech.com for information on how to contact the ADLINK regional office nearest you.
[🔗 Link to the original document](.adm-al30-50m-41056-1000-10/adm-al30-50m-41056-1000-10.pdf)