# ADM-TJ30

# Integrated AI-ADAS ECU and Cameras for Commercial Vehicles

# User’s Manual

![Front view of a black and silver industrial hardware unit with multiple ports (no visible text or symbols)](.adm-tj30-pre-manual-50m-20004-02-240329/373427566d0a32ab44f2f1de30d34d9d2ae09ab197752307561b71fa217becf2.jpg)

Manual Rev.: Rev. 0.2

Revision Date: March 29, 2024

Part No.: 50M-20004-1000

# Preface

# Copyright © 2024 ADLINK Technology, Inc.

This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

# Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

# Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.

![Symbol of a trash bin crossed with two diagonal lines, no text or labels present](.adm-tj30-pre-manual-50m-20004-02-240329/072bbb6566855de02984c1b721bafed982a6ecdfbdbd3b2048012d743ca11bed.jpg)

# Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

Revision History

<table><tr><td>Revision</td><td>Release Date</td><td>Description of Change(s)</td></tr><tr><td>0.1</td><td>2024-03-28</td><td>Preliminary release</td></tr><tr><td>0.2</td><td>2024-03-29</td><td>Package contents and figures updated</td></tr></table>

# Conventions

![The image displays a standard safety warning sign featuring a yellow triangle with a black border. Inside the triangle is a large black exclamation point. Below the triangle, the word 'CAUTION:' is printed in black capital letters on a white background.](.adm-tj30-pre-manual-50m-20004-02-240329/ce64c075d5766f29db08b873a13ad9d508682e027f460710591224144e36ba01.jpg)

Information to prevent minor physical injury, component damage, data loss, and/or program corruption when trying to complete a task.

Informations destinées à prévenir les blessures corporelles mineures, les dommages aux composants, la perte de données et/ou la corruption de programme lors de l'exécution d'une tâche.

![The image displays a safety warning label featuring a red triangle with a white exclamation point in the center. Below the symbol, the text reads 'WARNING:' in black capital letters. Directly underneath, the French translation 'AVERTISSEMENT' appears in black capital letters. Faint, illegible text is visible at the very bottom edge.](.adm-tj30-pre-manual-50m-20004-02-240329/d7a541e375e83fae2379533299f21b9f5dbed5ba912c5a9943e4539caed5cebf.jpg)

Information to prevent serious physical injury, component damage, data loss, and/or program corruption when trying to complete a specific task. Informations destinées à prévenir les blessures corporelles graves, les dommages aux composants, la perte de données et/ou la corruption de programme lors de l'exécution d'une tâche spécifique.

# Table of Contents

# Preface ....

# Table of Contents..................

# 1 Overview ...................

1.1 Introduction.. .5
1.2 Key Features. .5
1.3 Package Contents . ..5
1.4 Block Diagram . .6
1.5 Mechanical Overview . 7

1.5.1 Front Panel....
1.5.2 Side Panel... ..8

# 2 Specifications ..... 9

# 3 Getting Started... . 10

3.1 ADAS Features .. ..10

3.1.1 Forward Collision Warning (FCW) . .11
3.1.2 Lane Departure Warning (LDW) . .11
3.1.3 Blind Spot Detection / Information System (BSD / BSIS) . ..11
3.1.4 Driver Monitoring System (DMS) . . 12
3.1.5 Around View Monitoring (AVM).. . 13

3.2 Camera Combinations... ..13

3.2.1 Camera Specs (b/c/e/g) . . 13
3.2.2 Camera Specs (a) .. . 14
3.2.3 Camera Specs (d/f) .. . 14
3.2.4 Camera Specs (h) ... . 15

# Important Safety Instructions..... . 16

# Consignes de Sécurité Importantes ..... . 18

# Getting Service .................... . 20

# 1 Overview

# 1.1 Introduction

The ADLINK ADM-TJ30 is an automotive ECU — the integrated AI-ADAS ECU — that is connected with 8 cameras designed for effective accident prevention. Powered by vision-AI algorithm, it empowers commercial vehicles to automatically detect and classify vehicles, pedestrians, 2-wheeler riders, etc., and in turn prevent, potential traffic hazards by various ADAS functions. The ADAS functions featured include, and are not limited to, blind spot detection, lane departure warning, forward collision warning, and driver monitoring system.

# 1.2 Key Features

• All-in-one system for 360-degree, in-cabin ADAS solution
o Automotive-grade ECU & cameras x8
• Multiple ADAS function support:
o AVM, BSIS/BSD, DMS, LDW, FCW, etc.
UN-regulation compliance for large commercial vehicle
UN R130, R131, R151

# 1.3 Package Contents

• ADLINK AI-ADAS ECU
FPD LINK Cameras
FAKRA cable set

# 1.4 Block Diagram

![Based on the provided image, here is a description of the flowchart and block diagram:\n\n**Input Section (Left)**\n*   A yellow box labeled **'8 LVDS Cameras'** contains icons for cameras.\n*   Text labels specify **'7 x LVDS cameras'** and **'1 x DMS camera'**.\n*   A separate box below reads **'8 automotive-grade high resolution camera'**.\n*   Orange lines labeled **'FAKRA Quad x2'** connect the camera array to two vertical blocks on the board edge labeled **'DS90UB960'**.\n\n**Central Processing Unit (Center)**\n*   A large black block labeled **'TDA4V MidEco'** dominates the center.\n*   Inside this block are smaller blocks labeled: **'C7'**, **'C7'**, **'MMA'**, **'GPU'**, **'R5F'**, **'R5F'**, **'A72'**, **'Safety MCU R5F'**, **'A72'**, and **'Video Encode/Decode'**.\n*   Below the main chip are blocks labeled **'OSPI'** and **'eMMC'**.\n*   To the left of these are pin headers labeled **'Serial I/O'** and **'JTAG'**.\n\n**Connectivity and Output (Right and Bottom)**\n*   **Right Edge Ports:**\n    *   A **'DisplayPort'** connects to a **'DP Monitor'**.\n    *   **'RJ45 / 1Gbs x1'** connects to **'Ethernet'**.\n    *   **'Molex mini 50 100base T1'** connects to **'Ethernet'**.\n    *   **'Type A / USB 3.0'** connects to **'LTE / GPS / IMU'**.\n    *   A slot is labeled **'Micro SD Card'**.\n*   **CAN and Expansion (Bottom):**\n    *   Four yellow blocks labeled **'CAN-FD PHY'** connect via lines to a long white connector strip at the bottom.\n    *   This strip connects to external labels:\n        *   **'12 / 24V Vehicle Battery'** (Red line)\n        *   **'PWM Vehicle Speed'** (Yellow line)\n        *   **'GPI x3'** (Yellow line)\n        *   **'Vehicle CAN'** (Green line, accompanied by icons of a steering wheel, car, and gear shift)\n        *   **'CAN / Expansion CAN-H/CAN-L/12V/GND'** (Green line)](.adm-tj30-pre-manual-50m-20004-02-240329/6a520f9255bbc844dc826c5c77e3f2edee8fa39b6f422338d19f9c33d07c656c.jpg)

# 1.5 Mechanical Overview

# 1.5.1 Front Panel

![E\nD\nC\nB\nA](.adm-tj30-pre-manual-50m-20004-02-240329/a436bc95f0a006201673e418032506379a9002a8b7343d2030a3bd925d781864.jpg)

<table><tr><td>No.</td><td colspan="2">Interface</td><td>Description</td></tr><tr><td rowspan="4">A</td><td rowspan="4">IRISO IMSA-9194B-24B</td><td>DC Power In</td><td>9-32V</td></tr><tr><td>4x CAN/CAN-FD</td><td></td></tr><tr><td>3x GPI</td><td></td></tr><tr><td>Power output</td><td>DC 14V, 1A</td></tr><tr><td>B</td><td>Molex mini 50</td><td>Ethernet 100Base T1</td><td></td></tr><tr><td>C</td><td>SD-47272-001</td><td>RJ45, 1GbE</td><td></td></tr><tr><td>D</td><td>Mini FAKRA Z</td><td>2x Quad-camera inputs</td><td>for up to 8 cameras</td></tr><tr><td>E</td><td>USB Type-A</td><td>USB 3.0</td><td></td></tr></table>

# 1.5.2 Side Panel

![H\nG](.adm-tj30-pre-manual-50m-20004-02-240329/b49f163af84092e305b93a6ff755cfd98045e6c04d9854b1a70c58ffe52bed5f.jpg)

<table><tr><td>No.</td><td colspan="2">Interface</td><td>Description</td></tr><tr><td>G</td><td colspan="2">Micro SD Slot</td><td>for recording (optional)</td></tr><tr><td>H</td><td>SD-47272-001</td><td>DisplayPort</td><td></td></tr></table>

# 2 Specifications

ADM-TJ30 Specifications

<table><tr><td colspan="2">Operating Voltage</td><td>DC 9-32V</td></tr><tr><td colspan="2">Camera De-serializer</td><td>TI DS90UB960-Q1 x2</td></tr><tr><td colspan="2">Display</td><td>DisplayPort</td></tr><tr><td colspan="2">Optional Display</td><td>Serializer TI DS90UB953A-Q1 (customized display board)Serializer MAX96789</td></tr><tr><td colspan="2">Power Consumption</td><td>15W (at room temperature, without cameras)</td></tr><tr><td colspan="2">Dimensions</td><td>200 x 150 x 56.5 mm (LxWxH)</td></tr><tr><td colspan="2">Weight</td><td>TBD</td></tr><tr><td rowspan="2">Temperature</td><td>Operating</td><td>-40 to 85°C</td></tr><tr><td>Storage</td><td>-40 to 95°C</td></tr><tr><td colspan="2">Reliability</td><td>ISO 16750-4 / IEC 60068-2</td></tr><tr><td colspan="2">EMC</td><td>ISO 16750-2 / ISO 10605 / VSCC 56-3</td></tr></table>

# 3 Getting Started

# 3.1 ADAS Features

The ADLINK ADM-TJ30 provides a comprehensive vision perception solution and development Kit/SDK for ADAS and autonomous driving. This section will describe all achievable ADAS functions for commercial vehicle.

The following figure shows an example of possible camera positions and viewing angles in a busdriving scenario. Up to 8 camera inputs are supported.

![Forward: Driver View\nFront ADAS\na\ne\nb\nc\nDMS\nh\nf\nd\nBackward: E-Mirror View\n(mirrored image)](.adm-tj30-pre-manual-50m-20004-02-240329/912f515a3d98ac863e689a9397da9cf4f4d82ba4bcc767272694391983a0cd69.jpg)

Note: Regarding development Kit/SDK for L1/L2 domain controller, please contact our ADLINK representative for details.

3.1.1 Forward Collision Warning (FCW)

<table><tr><td>Vehicle Speed</td><td>30km/h to 150 km/h</td></tr><tr><td>Detection Target</td><td>Automobile motorcycle</td></tr><tr><td>Detectable Angle</td><td>Front / Rear / Side</td></tr><tr><td>Detection Range</td><td>Front: ≤100m for automobiles, ≤60m for motorcycles (from the front)Side: ~5.5m (from the center)</td></tr><tr><td>Accuracy</td><td>Day: ≥95%Night: ≥90%</td></tr><tr><td>Alert Trigger</td><td>Configurable with a Time to Collision (TTC) between 2.4 and 3.0 seconds</td></tr><tr><td>Operating Environment</td><td>Day/Night (with sufficient lighting within 50m)Note: If detection targets don’t have their light on, the surrounding lighting must be greater than 10 lux.</td></tr><tr><td>Number of Detection Targets</td><td>Up to 10 automotive, 3 lanes</td></tr></table>

3.1.2 Lane Departure Warning (LDW)

<table><tr><td>Vehicle Speed</td><td>50km/h to 150 km/h</td></tr><tr><td>Detection Range</td><td>≤80m (from the front)</td></tr><tr><td>Accuracy</td><td>≥95%</td></tr><tr><td>Alert Triger</td><td>Vehicle exceeding lane boundary(before reaching 30cm and without turning signal)</td></tr></table>

3.1.3 Blind Spot Detection / Information System (BSD / BSIS)

<table><tr><td>Vehicle Speed</td><td>BSD: 35km/h to 150 km/hBSIS: ≤35km/h</td></tr><tr><td>Detection Target</td><td>Automobile, motorcycle, bicycle, pedestrian</td></tr><tr><td>Accuracy</td><td>Day: ≥95%Night: ≥90%</td></tr><tr><td>BSD Alert Trigger</td><td>• Detection target's relative speed ≥ -5km/h• Required alerts (ISO 17387)○ Detection target being within 3m of the vehicle horizontally, or within 15m of the vehicle vertically• Recommended threshold alerts (ISO 17387)○ Detection target being within 6m of the vehicle horizontally, or within 30m of the vehicle vertically</td></tr><tr><td>BSIS Alert Trigger</td><td>Detecting Pedestrians, Bicycles, and Motorcycles:● IS:■ Required alerts (UN R151):◆ Detection target being within 4m of the vehicle horizontally, within 30m back of the vehicle, or within 7m at the front of the vehicle and with a relative speed nearing the vehicle■ Recommended threshold alerts (UN R151):◆ Detection target not meeting required alert but within 5.5m of the vehicle horizontally, within 40m back of the vehicle, or within 12m at the front of the vehicle● WS: Detection target already meeting required alert as accorded to IS regulations■ Required alerts (UN R151):◆ Detection target being within 1m of the vehicle horizontally, within 5m back of the vehicle, or within 1.5m at the front of the vehicle■ Recommended threshold alerts (UN R151):◆ Detection target being within 2.5m of the vehicle horizontally, within 7m back of the vehicle, or within 2.5m at the front of the vehicleDetecting Automobiles:● Vehicle speed &gt;10 km/h and detection target exhibiting a relative speed of  $\geqq -5$  km/h● Parameters for required alerts and recommended threshold alerts are the same as those of detecting pedestrians, bicycles, and motorcycles</td></tr></table>

3.1.4 Driver Monitoring System (DMS)

<table><tr><td colspan="2">Camera Installation</td><td>Distance between camera and driver's face shall be 70 to 110cmCamera focus shall be toward the driver's noseCamera shall be positioned lower than the driver's nose, and its optical axis and horizontal pitch angle should be between 0 and 15 degreesThe yaw angle between the optical axis of the lens and the human eye (normal driving posture) should be within ±20 degrees.The pitch+yaw angles of the lens should be greater than 10 degrees.</td></tr><tr><td colspan="2">Driver Recognition</td><td>Determining licensed driver, ≥90% accuracy</td></tr><tr><td rowspan="3">Fatigue Detection</td><td>Vehicle Speed</td><td>≥30km/h</td></tr><tr><td>Alert Trigger</td><td>Driver's eyes closed or yawning (2 seconds)</td></tr><tr><td>Accuracy</td><td>≥95%</td></tr><tr><td rowspan="3">Vision Tracking</td><td>Vehicle Speed</td><td>≥30km/h</td></tr><tr><td>Alert Trigger</td><td>Head turning exceeding the angles for the time setRaise head: 20 degreesDuck head: 15 degreesTurning head left/right: 25 degrees</td></tr><tr><td>Accuracy</td><td>≥90%</td></tr><tr><td>Smoking</td><td>Vehicle Speed</td><td>≥30km/h</td></tr><tr><td rowspan="2">Detection</td><td>Alert Trigger</td><td>Holding cigarette toward the face (within ~2cm) exceeding the time set (2 seconds)</td></tr><tr><td>Accuracy</td><td>≥95%</td></tr><tr><td rowspan="3">Phone Usage Detection</td><td>Vehicle Speed</td><td>≥30km/h</td></tr><tr><td>Alert Trigger</td><td>Holding phone toward the face (within ~5cm) exceeding the time set (3 seconds)</td></tr><tr><td>Accuracy</td><td>≥95%</td></tr></table>

# 3.1.5 Around View Monitoring (AVM)

The ADM-TJ30 provides a DisplayPort output for surrounding monitoring display.

<table><tr><td>Default Video Output</td><td>DisplayPort: 1024x768 @30fps (up to 1080p)</td></tr><tr><td>AVM Top View</td><td>Field of view: 4m radius around the vehicle</td></tr></table>

# 3.2 Camera Combinations

Below is a list of camera combinations for the abovementioned ADAS application.

<table><tr><td>Camera</td><td>Functions</td><td>Resolution &amp; Frame Rate</td><td>Dimensions (LxWxH, mm)</td></tr><tr><td>a</td><td>FCW/LDW</td><td>1920x1280 @30fps</td><td>28x28x30.7</td></tr><tr><td>B</td><td>AVM</td><td>1280x960 @30fps</td><td>24x24x28</td></tr><tr><td>c</td><td>BSIS / AVM</td><td>1280x960 @30fps</td><td>24x24x28</td></tr><tr><td>d</td><td>BSD / BSIS / AVM</td><td>1920x1280 @30fps</td><td>28x28x32.3</td></tr><tr><td>e</td><td>BSIS / AVM</td><td>1280x960 @30fps</td><td>24x24x28</td></tr><tr><td>f</td><td>BSIS / BSD AVM</td><td>1920x1280 @30fps</td><td>28x28x32.3</td></tr><tr><td>g</td><td>Rear / AVM</td><td>1280x960 @30fps</td><td>24x24x28</td></tr><tr><td>h</td><td>DMS</td><td>1280x960 @30fps</td><td>44.2x25x22.8</td></tr></table>

# 3.2.1 Camera Specs (b/c/e/g)

<table><tr><td colspan="2">Image Sensor</td><td>CMOS</td></tr><tr><td colspan="2">Pixel Resolution (default)</td><td>1280x960 (HxV)</td></tr><tr><td colspan="2">Camera Resolution (center/corner)</td><td>Center TV line TBD; Corner TV line TBD</td></tr><tr><td colspan="2">Frame Rate (default)</td><td>30fps</td></tr><tr><td colspan="2">Color Filter Array</td><td>RGGB</td></tr><tr><td colspan="2">Exposure Control</td><td>DOL3</td></tr><tr><td colspan="2">Serializer</td><td>TI DS90UB913A-Q1</td></tr><tr><td colspan="2">Output Interface</td><td>FPD-Link III with POC</td></tr><tr><td colspan="2">Output Formats</td><td>Parallel 8-bit YCbCr data (uyvy)</td></tr><tr><td colspan="2">Power Source (POC)</td><td>DC 6-12V</td></tr><tr><td colspan="2">Startup Time upon Powered</td><td>≤500ms</td></tr><tr><td colspan="2">Camera Current Consumption</td><td>≤120mA @6V</td></tr><tr><td colspan="2">Weight</td><td>16.5±5g</td></tr><tr><td colspan="2">Dimensions</td><td>24x24x28 mm (FAKRA connector excluded)</td></tr><tr><td rowspan="2">Temperature</td><td>Operating</td><td>-40 to 85°C</td></tr><tr><td>Storage</td><td>-40 to 95°C</td></tr><tr><td colspan="2">Water/Dust Resistance</td><td>IP67</td></tr></table>

# 3.2.2 Camera Specs (a)

<table><tr><td colspan="2">Image Sensor</td><td>CMOS</td></tr><tr><td colspan="2">Pixel Size</td><td>3.0x3.0 μm (HxV)</td></tr><tr><td colspan="2">Camera Resolution</td><td>2.46M, 1920x1280 (HxV)</td></tr><tr><td colspan="2">Frame Rate (default)</td><td>30 fps</td></tr><tr><td colspan="2">Color Filter Array</td><td>RGGB</td></tr><tr><td colspan="2">S/N Ratio</td><td>51.35 dB</td></tr><tr><td colspan="2">Serializer</td><td>TI953</td></tr><tr><td colspan="2">Output Interface</td><td>FPD-Link III with POC</td></tr><tr><td colspan="2">Output Formats</td><td>MIPI 4-lane YUV422 8-bit</td></tr><tr><td colspan="2">Power Source (POC/ typical)</td><td>DC 6-12V / 6V</td></tr><tr><td colspan="2">Startup Time upon Powered</td><td>≤200ms</td></tr><tr><td colspan="2">Camera Current Consumption</td><td>≤110mA @12V</td></tr><tr><td colspan="2">Weight</td><td>28.8g</td></tr><tr><td colspan="2">Dimensions</td><td>28x28x31.7 mm (FAKRA connector excluded)</td></tr><tr><td rowspan="2">Temperature</td><td>Operating</td><td>-40 to 85°C</td></tr><tr><td>Storage</td><td>-40 to 95°C</td></tr><tr><td colspan="2">Water/Dust Resistance</td><td>IP67 / IP69K</td></tr></table>

# 3.2.3 Camera Specs (d/f)

<table><tr><td colspan="2">Image Sensor</td><td>CMOS (Sony ISX021)</td></tr><tr><td colspan="2">Camera Resolution</td><td>2.46M, 1920x1280 (HxV)</td></tr><tr><td colspan="2">Resolution (center/corner)</td><td>TBD</td></tr><tr><td colspan="2">Frame Rate (default)</td><td>30 fps</td></tr><tr><td colspan="2">Color Filter Array</td><td>RGGB</td></tr><tr><td colspan="2">S/N Ratio</td><td>51.35 dB</td></tr><tr><td colspan="2">Serializer</td><td>TI953</td></tr><tr><td colspan="2">Output Interface</td><td>FPD-Link III with POC</td></tr><tr><td colspan="2">Output Formats</td><td>MIPI 4-lane YUV422 8-bit</td></tr><tr><td colspan="2">Power Source (POC/ typical)</td><td>DC 6-12V / 6V</td></tr><tr><td colspan="2">Startup Time upon Powered</td><td>≤200ms</td></tr><tr><td colspan="2">Camera Current Consumption</td><td>≤110mA @12V</td></tr><tr><td colspan="2">Weight</td><td>28.8g</td></tr><tr><td colspan="2">Dimensions</td><td>28x28x32 mm (FAKRA connector excluded)</td></tr><tr><td rowspan="2">Temperature</td><td>Operating</td><td>-40 to 85°C</td></tr><tr><td>Storage</td><td>-40 to 95°C</td></tr><tr><td colspan="2">Water/Dust Resistance</td><td>IP67 / IP69K</td></tr></table>

3.2.4 Camera Specs (h)

<table><tr><td colspan="2">Image Sensor</td><td>ST VB56G4A</td></tr><tr><td colspan="2">Lens F No.</td><td>F2.0</td></tr><tr><td colspan="2">Lens Structure</td><td>2G2P with IR940 filter</td></tr><tr><td colspan="2">Camera Resolution</td><td>Mega-pixel (1120x1364, default)</td></tr><tr><td colspan="2">Resolution (center/corner)</td><td>TBD</td></tr><tr><td colspan="2">Frame Rate (default)</td><td>30 fps</td></tr><tr><td colspan="2">View Angle (H)</td><td>31 degrees</td></tr><tr><td colspan="2">Color Filter Array</td><td>Mono</td></tr><tr><td colspan="2">Exposure Control</td><td>External AE</td></tr><tr><td colspan="2">Serializer</td><td>TI DS90UB953</td></tr><tr><td colspan="2">Output Interface</td><td>FPD-Link III with POC</td></tr><tr><td colspan="2">Output Formats</td><td>10-bit raw data</td></tr><tr><td colspan="2">LED</td><td>2x IR (940nm) LEDs</td></tr><tr><td colspan="2">LED Power</td><td>Max. 1.5W per LED</td></tr><tr><td colspan="2">Power Source (POC/ typical)</td><td>DC 12V</td></tr><tr><td colspan="2">Startup Time upon Powered</td><td>≤200ms</td></tr><tr><td colspan="2">Camera Current Consumption</td><td>~250mA @12V (with default settings)</td></tr><tr><td colspan="2">Weight</td><td>38.4g</td></tr><tr><td colspan="2">Dimensions</td><td>44.2x25x25.8 mm (FAKRA connector excluded)</td></tr><tr><td rowspan="2">Temperature</td><td>Operating</td><td>-40 to 85°C</td></tr><tr><td>Storage</td><td>-40 to 95°C</td></tr><tr><td colspan="2">Water/Dust Resistance</td><td>N/A</td></tr></table>

# Important Safety Instructions

For user safety, please read and follow all instructions, WARNINGS, CAUTIONS, and NOTES marked in this manual and on the associated equipment before handling/operating the equipment.

1. Read these safety instructions carefully.
2. Keep this user’s manual for future reference.
3. Read the specifications section of this manual for detailed information on the operating environment of this equipment.
4. The equipment can be operated at an ambient temperature of $40 ^ { \circ } \mathsf { C }$ .
5. When installing/mounting or uninstalling/removing equipment; or when removal of the chassis lid required for user servicing (Section 3.1-3.5):

• Turn off power and unplug any power cords/cables, and
Reinstall the chassis lid before restoring power.

![The image displays a red triangle containing a white exclamation point. Below the triangle is the word 'WARNING:' in black, uppercase letters.](.adm-tj30-pre-manual-50m-20004-02-240329/ad08b68162c5d3926e1f1194a97816f0866f0b47925bf8132e14bfe21744c625.jpg)
AVERTISSEMENT

Hazardous moving parts. Keep body parts out of the motion path.

6. To avoid electrical shock and/or damage to equipment:

• Keep equipment away from water or liquid sources;
• Keep equipment away from high heat or high humidity;
• Keep equipment properly ventilated (do not block or cover ventilation openings);
• Make sure to use recommended voltage and power source settings;
• Always install and operate equipment near an easily accessible electrical socketoutlet;
• Secure the power cord (do not place any object on/over the power cord);
Only install/attach and operate equipment on stable surfaces and/or recommended mountings;
If the equipment will not be used for long periods of time, turn off and unplug the equipment from its power source.

• The power cord must be connected to a socket or outlet with a ground connection.

7. Never attempt to fix the equipment. Equipment should only be serviced by qualified personnel.
8. A Lithium-type battery may be provided for uninterrupted, backup or emergency power.

![The image displays a triangular warning sign with a yellow background and a thick black border. Centered inside the triangle is a large black exclamation mark. Below the triangle, the text 'CAUTION:' is printed in black capital letters.](.adm-tj30-pre-manual-50m-20004-02-240329/bd2ece1ab78417e720d8c94c02f5ca8fd69fc0cb04efc5dfdf2e2b2e4aa5db6b.jpg)

Risk of explosion if battery is replaced with one of an incorrect type. Please dispose of used batteries appropriately.

9. This equipment is not suitable for use in locations where children are likely to be present.

10.Equipment must be serviced by authorized technicians when:

• The power cord or plug is damaged;
Liquid has penetrated the equipment;
It has been exposed to high humidity/moisture;
• It is not functioning or does not function according to the user’s manual;
• It has been dropped and/or damaged; and/or,
It has an obvious sign of breakage.

11.Please pay strict attention to all warnings and advisories appearing on the device, to avoid injury or damage.
12.The equipment may have more than one power supply input. To reduce the risk of electrical shock, trained personnel should disconnect all power supply inputs before servicing.

![This image displays a standard safety warning sign. It features a yellow triangle with a thick black border containing a large black exclamation point in the center. Below the triangle, the word 'CAUTION' is printed in black capital letters.](.adm-tj30-pre-manual-50m-20004-02-240329/6aa93fee290b61cd3f9bd9305f14ee83361cf1e63d719a56f3f72b5ae3481e73.jpg)

Shock hazard! Disconnect all power supply inputs before servicing.

![The image displays a yellow triangular warning sign with a thick black border. Inside the triangle is a black lightning bolt symbol, centered, indicating an electrical hazard.](.adm-tj30-pre-manual-50m-20004-02-240329/860f4255df36b9488b9e1b6a468b6081939e6af63ceb5e88ae7b1009a0e61e6a.jpg)
Shock hazard! Risque d'électrocution!

![The image displays a black and white line drawing of an electronic schematic symbol. It features a large triangle pointing to the right in the center. To the left of the triangle are two vertical parallel lines. Extending from the right side and bottom of the triangle are short horizontal lines. In the upper right section, there is a long arrow pointing to the right, situated above three stepped, zig-zag lines that descend toward the right.](.adm-tj30-pre-manual-50m-20004-02-240329/4ee78090f5f5dbbbc776f88dbfe41e3aa00e58de93305226221307e2107249d4.jpg)
Multiple power sources Sources d'alimentation multiples

13.It is recommended that equipment be installed only in a server room or computer room where access is:

Restricted to qualified service personnel or users familiar with restrictions applied to the location, reasons therefor, and any precautions required;
Only afforded by the use of a tool or lock and key, or other means of security, and is controlled by the authority responsible for the location.

14.Suitable for installation in Information Technology Rooms in accordance with Article 645 of the National Electrical Code and NFPA 75.

# Consignes de Sécurité Importantes

Pour assurer la sécurité de l’utilisateur, veuillez lire et suivre toutes les directives, ainsi que les AVERTISSEMENTS, MISES EN GARDE et REMARQUES de ce manuel et indiqués sur l’équipement associé avant de manipuler ou utiliser l’équipement.

1. Veuillez lire attentivement ces instructions de sécurité avec soin.
2. Veuillez conserver ce manuel pour référence future.
3. Veuillez lire la section des spécifications de ce manuel pour avoir des informations détaillées sur l’environnement d’exploitation de cet équipement.
4. L’équipement peut être utilisé à une température ambiante de $40 ^ { \circ } \mathsf { C } .$
5. Lors de l’installation ou du montage et de la désinstallation ou de la dépose de l’équipement; ou lors de la dépose du couvercle du châssis pour procéder à l’entretien par l’utilisateur (Sections 3.1-3.5):

• Coupez l’alimentation et débranchez les cordons et les câbles d’alimentation, et
• Reposez le couvercle du châssis avant de remettre l’alimentation.

![The image displays a warning symbol consisting of a red equilateral triangle with a white border containing a white exclamation point in the center. Below the triangle, the text 'WARNING:' is printed in black capital letters.](.adm-tj30-pre-manual-50m-20004-02-240329/2b09269bf09f9b76fa726ecf7dcd170278d1b677c86d27c49a4cae3a8759069f.jpg)

Pièces mobiles dangereuses. Gardez les parties du corps hors de la trajectoire.

6. Pour éviter un risque d’électrocution et pour éviter d’endommager l’équipement :

• Éloignez l’équipement de l’eau et de toute source liquide;
• Éloignez l’équipement de toute source de chaleur ou d’humidité élevée;
Gardez l’équipement correctement ventilé (ne pas bloquer ou couvrir les ouvertures de ventilation);
Veillez à utiliser la tension recommandée et les réglages adéquats pour la source d’alimentation;
Veuillez toujours installer et exploiter l’équipement à proximité d’une prise de courant facilement accessible;
Assurez-vous que le cordon d’alimentation est acheminé de manière sécuritaire (ne déposez aucun objet dessus);
Installez, fixez et utilisez l’équipement sur des surfaces stables ou sur les fixations recommandées uniquement;
Si l’équipement n’est pas utilisé pendant une longue période, éteignez-le et débranchez-le de sa source d’alimentation.
• Le cordon d'alimentation doit être connecté à une prise ou à une prise de courant avec mise à la terre.

7. N’essayez jamais de réparer l’équipement. L’équipement ne doit être réparé que par du personnel qualifié.
8. Une pile au lithium peut être installée pour assurer l’alimentation de secours ou d’urgence en continu.

![The image displays a standard safety warning sign featuring a yellow triangle with a black border. Inside the triangle is a large black exclamation point. Directly beneath the triangle, the word 'CAUTION:' is printed in black, uppercase letters.](.adm-tj30-pre-manual-50m-20004-02-240329/eab4c3e3ab55c1e0d3eb691a9c23814ef3584242e5d5aba7a0ec6cd4bfdb90c2.jpg)

Risque d'explosion si la batterie est remplacée par une batterie d'un type incorrect. Veuillez éliminer les piles usagées de manière appropriée.

9. Cet équipement ne convient pas à une utilisation dans des lieux pouvant accueillir des enfants.
10.L’équipement doit être entretenu par des techniciens agréés lorsque :

• le cordon d’alimentation est endommagé ou lorsque la fiche électrique est endommagée;
• du liquide a pénétré à l’intérieur de l’équipement;
• l’équipement a été exposé à un taux d’humidité élevé;
• l’équipement ne fonctionne pas ou ne fonctionne pas conformément au manuel de l’utilisateur;
• l’équipement est tombé ou lorsqu’il a été endommagé;
• l’équipement présente un signe évident de défaillance.

11.Veuillez porter une attention rigoureuse à tous les avertissements et à tous les avis figurant sur l’appareil, pour éviter des blessures ou des dommages.

12.L’équipement peut avoir plus d’une entrée d’alimentation. Pour réduire le risque d’électrocution, le personnel qualifié devrait déconnecter toutes les entrées d’alimentation avant de procéder à l’entretien.

![The image displays a yellow triangular warning symbol with a black border containing a black exclamation point. Below the triangle is the text 'CAUTION:' in black capital letters.](.adm-tj30-pre-manual-50m-20004-02-240329/2415dc625b809e4e27c9cb6708599d9fd67b8bba9b1112c2660006b4abb84707.jpg)

Risque d'électrocution! Débranchez toutes les entrées d'alimentation avant de procéder à l'entretien.

![A yellow triangular warning sign with a black border featuring a black lightning bolt symbol in the center.](.adm-tj30-pre-manual-50m-20004-02-240329/a750857b7993c6e448213703ba20198b690cee5912300ce5f0a0cf40fc1ab437.jpg)
Shock hazard! Risque d'électrocution!

![The image displays a black line drawing of a schematic symbol on a white background. It features a central triangle pointing to the right, resembling a standard buffer or inverter logic gate. To the left of the triangle are four vertical parallel lines, suggesting an input bus. To the right of the triangle are four horizontal parallel lines, suggesting an output bus. Above the right-side lines, a long arrow points to the right, indicating direction. The symbol appears to represent a 4-bit buffer or bus driver.](.adm-tj30-pre-manual-50m-20004-02-240329/54564df7e5c3efefd60331abc97bbaf4c4be0e89c37d0335ff8b683dd87877f1.jpg)
Multiple power sources Sources d'alimentation multiples

13.Il est recommandé que l'équipement soit installé que dans une salle de serveur ou de la salle informatique où:

L'accès est limité au personnel de maintenance qualifié ou utilisateurs familiers avec les restrictions appliquées à l'emplacement, motifs, et tout les précautions nécessaires, et;
• L'accès est uniquement assurée par l'utilisation d'un outil ou clé, ou d'autres moyens de sécurité, et est contrôlé par l'autorité responsable de l'emplacement.

14.Peut être installé dans des salles de matériel de traitement de l’information conformément à l’article 645 du National Electrical Code et à la NFPA 75.

# Getting Service

Ask an Expert: https://www.adlinktech.com/en/Askanexpert

# ADLINK Technology, Inc.

Address: No. 66, Huaya 1st Rd., Guishan District

Taoyuan City 333411, Taiwan

333411 桃園市龜山區華亞一路 66號

Tel: +886-3-216-5088

Fax: +886-3-328-5706

Email: service@adlinktech.com

# Ampro ADLINK Technology, Inc.

Address: 6450 Via Del Oro, San Jose, CA 95119-1208, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

Fax: +1-408-600-1189

Email: info@adlinktech.com

# ADLINK Technology (China) Co., Ltd.

Address: 上海市浦东新区张江高科技园区芳春路 300 号 (201203)

300 Fang Chun Rd., Zhangjiang Hi-Tech Park, Pudong New Area

Shanghai, 201203 China

Tel: +86-21-5132-8988

Fax: +86-21-5132-3588

Email: market@adlinktech.com

# ADLINK Technology GmbH

Address: Hans-Thoma-Strasse 11, D-68163, Mannheim, Germany

Tel: +49-621-43214-0

Fax: +49-621 43214-30

Email: emea@adlinktech.com

Please visit the Contact page at www.adlinktech.com for information on how to contact the ADLINK regional office near you.
[🔗 Link to the original document](.adm-tj30-pre-manual-50m-20004-02-240329/adm-tj30-pre-manual-50m-20004-02-240329.pdf)