# AmITX-CF-I # User's Manual Mini-ITX Embedded Motherboard with 8 $^{th}$ and 9 $^{th}$ Gen Intel $^{\circledR}$ Core $^{TM}$ i7/i5/i3 Processors and Intel $^{\circledR}$ Q370/H310 Chipset ![Close-up of a blue computer motherboard with visible CPU socket, RAM slots, and various ports (no readable text or symbols)](.amitx-cf-i-50-1x017-1000-10/ce13ceb494247765b1690d0400c3e962146f75d38f4252a4ab0983f59a9183d0.jpg) Manual Rev.: 1.0 Revision Date: November 3, 2020 Part Number: 50-1X017-1000 # Preface # Copyright Copyright © 2020 ADLINK Technology, Inc. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer. # Disclaimer The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages. # Environmental Responsibility ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company. ![Symbol of a trash bin crossed with a diagonal line and a horizontal bar below (no text or labels)](.amitx-cf-i-50-1x017-1000-10/cf58c26e57e71627846a88167665b9167ba12d74c5fc2a6680d2c38da2a7fd38.jpg) Battery Labels (for products with battery) ![Simple line drawing of a trash bin with crossed lines indicating no waste or restriction (no text or symbols)](.amitx-cf-i-50-1x017-1000-10/290827fa7f78d299097febd2d478bf6e0808fbc64b4a0c5d8e6b4ab16f82f193.jpg) ![This image features a black outline of the standard recycling symbol (three arrows chasing each other) enclosed within a square. Below the square is the text 'Li-ion' in a bold, black sans-serif font.](.amitx-cf-i-50-1x017-1000-10/55488508bd013053b925894bcc990aed209c2f0d83e051930a4a6868b8145b2c.jpg) ![RECYCLE\nRBRC\nLi-ion\n7.800.822.8837](.amitx-cf-i-50-1x017-1000-10/8ef74bda9f6a5ade7752c459206f83af7a76f2a23060977721cdd96ef4bf1831.jpg) ![廢電池請回收](.amitx-cf-i-50-1x017-1000-10/5e5e8603084fdba269f2329145120ec1c927a710cf9fddf02bba1ac5caef248b.jpg) # California Proposition 65 Warning ![The image displays a standard yellow warning sign featuring a black triangle with a thick black border. Inside the triangle, centered, is a black exclamation point.](.amitx-cf-i-50-1x017-1000-10/3c788fa818b7fe24ba740788bc7b59834871073500fc0064fac96a7491e334cf.jpg) WARNING: This product can expose you to chemicals including acrylamide, arsenic, benzene, cadmium, Tris(1,3-dichloro-2-propyl)phosphate (TDCPP), 1,4-Dioxane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and vinyl materials, which are known to the State of California to cause cancer, and acrylamide, benzene, cadmium, lead, mercury, phthalates, toluene, DEHP, DIDP, DnHP, DBP, BBP, PVC, and vinyl materials, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. # Trademarks Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies. Revision History

Revision	Description	Date	By
1.0	Initial release	2020-11-03	JC

# Table of Contents # Preface....ii # List of Figures ......v # List of Tables......vi # 1 Introduction....1 1.1 Packing List....1 1.2 Optional Accessories .... 1 # 2 Specifications ....3 2.1 Core System 3 2.2 Rear I/O Connectors 3 2.3 Internal Headers and Connectors 4 2.4 Form Factor......4 2.5 Video 4 2.6 Audio 4 2.7 LAN 4 2.8 Trusted Platform Module (TPM)....5 2.9 Power Specification....5 2.10 Power Consumption....5 2.11 Temperatures....6 2.12 Environmental 6 2.13 Operating Systems....6 2.14 Functional Block Diagram 7 # 3 Mechanical Layout ....9 3.1 Connector Locations 9 3.2 Mechanical Dimensions....11 3.3 Thermal Solutions 13 # 4 Connectors and Jumpers ....15 4.1 Rear IO Connectors 15 4.2 Internal Connectors....19 4.3 Jumper and Switch Settings....26 # 5 Driver Installation 29 # 6 System Resources ....31 6.1 System Memory Map 31 6.2 I/O Map 32 6.3 Interrupt Request (IRQ) Map....34 # 7 BIOS Setup....35 7.1 Menu Structure....35 7.2 Main 36 7.3 Advanced 37 7.4 Chipset 48 7.5 Security 55 7.6 Boot....57 7.7 Save & Exit 58 # Safety Instructions....59 # Getting Service....60 # List of Figures Figure 1: AmlTX-CF-I Functional Block Diagram....7 Figure 2: AmlTX-CF-I Rear I/O ....9 Figure 3: AmlTX-CF-I Component-Side Connectors .... 10 Figure 4: AmlTX-CF-I Mechanical Dimensions....12 Figure 5: Jumper and Switch Locations 26 # List of Tables Table 1: AmlTX-CF-I Processors ....1 Table 2: System Memory Map ...... 31 Table 3: I/O Map.... 32 Table 4: IRQ Map 34 # 1 Introduction The AmITX-CF-I is a Mini-ITX motherboard supporting the Desktop 8th and 9th Generation Intel® Core™ i7/i5/i3 and Pentium®/Celeron® Processor with Intel® Q370/H310 Chipset. The AmITX-CF-I is specifically designed for customers who need high-level processing and graphics performance with a long product life solution. The AmITX-CF-I features one DisplayPort, one HDMI, one DVI-D, dual Gigabit Ethernet ports, USB 3.0 ports, USB 2.0 ports, and SATA 6 Gb/s ports. Expansion is provided by one PCIe x16, and one mini-PCIe slot. The onboard feature connector provides GPIO, SMBus, and I $^{2}$ C support. The board is equipped with SPI AMI EFI BIOS, supporting embedded features such as hardware monitor and watchdog timer Table 1: AmITX-CF-I Processors

Model Number	Chipset
AmITX-CF-I-Q370	Q370
AmITX-CF-I-H310	H310

Latest revisions of the datasheet, user's manual, BIOS, drivers, and board support packages, can be downloaded from the product webpage on the ADLINK web site: www.adlinktech.com # 1.1 Packing List - AmITX-CF-I Mini-ITX motherboard - Rear I/O shield # 1.2 Optional Accessories • COM port cable, 1 port (P/N: 30-10297-0000-B0) - USB 2.0 cable, 2 ports for AmITX-CF-I-Q370/H310 (P/N: 30-21625-0000-B0) - USB 3.0 cable, 2 ports for AmITX-CF-I-Q370 (P/N: 30-21597-1000-A0) This page intentionally left blank. # 2 Specifications # 2.1 Core System

CPU	Desktop 8th Generation Intel® CoreTM i7/i5/i3 and Pentium®/Celeron® Processor, LGA1151 socketIntel® CoreTM i7-8700, 3.2GHz, 12M Cache, 65W TDP, LGA1151, DDR4 2666MHz support (6C/12T)Intel® CoreTM i7-8700T, 2.4GHz 12M Cache, 35W TDP, LGA1151, DDR4 2666MHz support (6C/12T)Intel® CoreTM i5-8500, 3.0GHz, 9M Cache, 65W TDP, LGA1151, DDR4 2666MHz support (6C/6T)Intel® CoreTM i5-8500T, 2.1GHz, 9M Cache, 35W TDP, LGA1151, DDR4 2666MHz support (6C/6T)Intel® CoreTM i3-8100, 3.6GHz, 6M Cache, 65W TDP, LGA1151, DDR4 2400MHz support (4C/4T)Intel® CoreTM i3-8100T, 3.1GHz, 6M Cache, 35W TDP, LGA1151, DDR4 2400MHz support (4C/4T)Intel® Pentium® G5400, 3.7GHz, 4M Cache, 58W TDP, LGA1151, DDR4 2400MHz support (2C/4T)Intel® Pentium® G5400T, 3.1GHz, 4M Cache, 35W TDP, LGA1151, DDR4 2400MHz support (2C/4T)Intel® Celeron® G4900, 3.1GHz, 2M Cache, 54W TDP, LGA1151, DDR4 2400MHz support (2C/2T)Intel® Celeron® G4900T, 2.9GHz, 2M Cache, 35W TDP, LGA1151, DDR4 2400MHz support (2C/2T)Desktop 9th Generation Intel® CoreTM i7/i5/i3 and Pentium®/Celeron® Processor, LGA1151 socketIntel® CoreTM i7-9700E, 2.6GHz, 12M Cache, 65W TDP, LGA1151, DDR4 2666MHz support (8C/8T)Intel® CoreTM i7-9700TE, 1.8GHz, 12M Cache, 35W TDP, LGA1151, DDR4 2666MHz support (8C/8T)Intel® CoreTM i5-9500E, 3.0GHz, 9M Cache, 65W TDP, LGA1151, DDR4 2666MHz support (6C/6T)Intel® CoreTM i5-9500TE, 2.2GHz, 9M Cache, 35W TDP, LGA1151, DDR4 2666MHz support (6C/6T)Intel® CoreTM i3-9100E, 3.1GHz, 6M Cache, 65W TDP, LGA1151, DDR4 2400MHz support (4C/4T)Intel® CoreTM i3-9100TE, 2.2GHz, 6M Cache, 35W TDP, LGA1151, DDR4 2400MHz support (4C/4T)Note:Availability of features may vary between processor SKUs and operating systems
Chipset	Intel® Q370/H310 Chipset
Memory	Two 260-pin DDR4 non-ECC SODIMM slots, DDR4 2400/2666 MHz, up to 32 GB (CPU dependent)
Embedded BIOS	AMI® UEFI BIOS, 256Mb SPI flash memory (H310: 128Mb)

# 2.2 Rear I/O Connectors

Display	1x DisplayPort, 1x HDMI, 1x DVI-D
LAN	Dual GbE RJ-45
USB	4x USB 3.1 Gen2 connectors (H310: USB 3.1 Gen1)
Audio	1x Line-out, 1x Line-in, 1x Mic-in connector
Serial	1x RS-232/422/485 with auto flow control connector

# 2.3 Internal Headers and Connectors

PCI Express Slots	PCIe x16 (Gen3)1x Mini PCIe (full/half size), supports PCIe x1 Gen2, USB 2.0
USB	2x USB 3.1 Gen1 onboard header (H310: not available)2x USB 2.0 onboard header
SATA	4x SATA 6.0 Gb/s connectors. Software RAID support 0/1/5/10 (H310: 2x SATA, no RAID support)1x M.2 (2280)
Serial	4x RS-232 headers
LVDS	1x LVDS pin header, supports single/dual channel 24-bit LVDS up to 1920x1080 @ 60 Hz
DIO	1x 8-bit GPIO pin header
Other	CPU Fan HeaderSys Fan HeaderAudio HeaderFront Panel HeaderSPI HeaderCase Open HeaderCPU 12V Power Connector (4-pin)ATX Power Connector (24-pin)

# 2.4 Form Factor Mini-ITX: 170mm x 170mm # 2.5 Video

GPU Feature Support	Integrated Gen 9.5 Intel® Graphics with up to 24 execution units supporting the latest graphics APIs DirectX 12 and OpenGL 4.5 for improved 3D rendering performance at low power.
Display Interface Support	1x DVI-D, resolution up to 1920 x 1200 @ 60 Hz1x DP, resolution up to 4096 x 2304 @ 60 Hz1x HDMI, resolution up to 4096 x 2160 @ 30 Hz1x LVDS, supports single/dual channel 24-bit LVDS up to 1920x1080 @ 60 Hz

# 2.6 Audio

Audio Codec	Realtek ALC888S
Interfaces	1x Line-out, 1x Line-in, 1x Mic-in connector

# 2.7 LAN

LAN1/2	Realtek RTL8111G Ethernet controllers
Interface	10/100/1000 Mbps RJ45 connectors

# 2.8 Trusted Platform Module (TPM)

TPM 2.0

Infineon SLB9665TT2.0 (optional)

# 2.9 Power Specification

Power Modes	AT and ATX mode
Power Requirement	+12V (5.51A), +5V (1.466A), +3.3V (2.09A), 5VSB (0.6A)
Power Management	ACPI 5.0 compliant
Power States	Supports S0, S4, S3, S5, (Wake-on-USB S3/S4, WoL S3/S4/S5)
Power Connector	1x 24-pin ATX connector; 1x 4-pin ATX 12V connector

# 2.10 Power Consumption

Motherboard		AmITX-CF-I-Q370
Processor		Intel® CoreTM i7-8700, 3.2GHz, 12M Cache, 65W TDP
DRAM		ADATA 16GB DDR4 2666 MHz SO-DIMM
HDD		SanDisk X400 SATA 2.5” SSD 256GB
Power Supply Unit		FSP700-80PSA
OS		Windows 10 Pro
Test Software		BurnIn Test V8.0 Pro (1043) for 64-bit Windows(CPU, RAM, 2D/3D Graphics, and storage with 100%)
Input power		Measurement			Measure Point
Input power		V	A	W	Measure Point
Standby mode
+5Vsb	5.0V	5.036	0.180	0.906	EATXPWR1
Idle mode
+3.3V	3.3V	3.318	0.416	1.380	EATXPWR1
+5V	5.0V	5.187	0.004	0.021	EATXPWR1
+5Vsb	5.0V	5.035	0.070	0.352	EATXPWR1
+12V	12.0V	12.304	0.587	7.222	EATXPWR1
-12V	-12.0V	-12.301	0.036	0.443	EATXPWR1
+12V_4P	12.0V	12.219	0.332	4.057	ATX12V1
Max Load
+3.3V	3.3V	3.305	0.677	2.237	EATXPWR1
+5V	5.0V	5.135	0.274	1.407	EATXPWR1
+5Vsb	5.0V	5.022	0.122	0.613	EATXPWR1
+12V	12.0V	12.222	0.713	8.714	EATXPWR1
-12V	-12.0V	-11.983	0.060	0.719	EATXPWR1
+12V_4P	12.0V	12.262	6.137	75.252	ATX12V1

# 2.11 Temperatures

Standard Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 85°C

# 2.12 Environmental

Humidity	60°C @ 95% RH non-condensing
Vibration	3.5Grms, 5-500Hz, Non-operation

# 2.13 Operating Systems

Standard Support

Microsoft Windows 10 64bit, Fedora 30 64-bit, Ubuntu 18.10 LTS 64bit

2.14 Functional Block Diagram ![Based on the provided block diagram, here is the accurate description of the blocks and connections:\n\n**Main Processor Block**\n* **Central Block:** 'Intel® Core™ i7/i5/i3 Processor (formerly “Coffee Lake Refresh”) LGA 1151 Socket'\n* **Connections to Processor (Left - Display):**\n * 'DP Conn. (1.2)' connects via 'DDI1'.\n * 'DVI-D' connects via 'TMDS' and a 'Passive Level Shifter' to 'DDI2'.\n * 'HDMI Conn. (1.4b)' connects via 'TMDS' and an 'ASM1442K Level Shifter' to 'DDI3'.\n * 'LVDS' connects via 'CH5711' and 'eDP'.\n* **Connections to Processor (Right - Memory/Expansion):**\n * 'Channel A' connects to 'Vertical SODIMM DDR4 (non ECC)'.\n * 'Channel B' connects to 'Vertical SODIMM DDR4 (non ECC)'.\n * 'PCIe x16' connects to 'PCIe x16 slot'.\n\n**Main Chipset Block**\n* **Central Block:** 'Intel® Q370/H310 Chipset'\n* **Connection to Processor:** Connected via 'Audio' and 'DMI 3.0' (double-headed arrows).\n\n**Chipset Connections (Left Side - Interfaces):**\n* **SPI:** Connects to 'BIOS (256Mb UEFI)' and 'SPI Header'.\n* **HDA:** Connects to 'ALC892 (ALC888S)', which interfaces with:\n * 'Rear I/O Conn. x1 (Line-In, Line-Out, Mic-In)'\n * 'Front Audio header x1 (Line-Out, Mic-In)'\n* **LPC:** Connects to:\n * 'TPM 2.0 (Optional) SLB9665TT2.0'\n * 'NCT6106D WDT H/W Monitor' (which also connects to 'LPC Header')\n * 'NCT6106D' further connects to:\n * 'RS-232/422/485 DB9 x1' via 'UART1'\n * 'RS232 Header x4' via 'UART2~5'\n * 'CPU Fan x1' and 'Sys Fan x1' via 'Fan'\n* **GPIO:** Connects to 'GPIO Header x1' via '8-bit GPIO'.\n\n**Chipset Connections (Right Side - Ports & Headers):**\n* **Ethernet/USB Group 1:**\n * 'PCIe #11' connects via 'GbE' -) 'RTL 8111G' -) 'MDIx' -) 'RJ-45'.\n * 'USB 3.1 #1/#2' connects via 'USB 3.1 Gen2 (H310: USB 3.1 Gen1)' -) 'USB 3.0 Port x2'.\n * 'USB 2.0 #1/#2' connects via 'USB 2.0' -) 'USB 3.0 Port x2'.\n* **Ethernet/USB Group 2:**\n * 'PCIe #12' connects via 'PCIe x1' -) 'RTL 8111G' -) 'MDIx' -) 'RJ-45'.\n * 'USB 3.1 #3/#4' connects via 'USB 3.1 Gen2 (H310: USB 3.1 Gen1)' -) 'USB 3.0 Port x2'.\n * 'USB 2.0 #3/#4' connects via 'USB 2.0' -) 'USB 3.0 Port x2'.\n* **USB Group 3 (Dashed Box - Q370 only):**\n * 'USB 3.1 Gen1' connects to 'USB 3.0 Header'.\n * 'USB 3.1 #7/#8' connects via 'USB 2.0'.\n * 'USB 2.0 #5/#6' connects via 'USB 2.0'.\n * 'USB 2.0 #7/#8' connects via 'USB 2.0' -) 'USB 2.0 Header'.\n* **Storage/Expansion:**\n * 'PCIe #13' connects via 'SATA #0' -) 'SATA Port 1'.\n * 'PCIe #14' connects via 'SATA #1' -) 'SATA Port 2'.\n * 'PCIe #15' connects via 'SATA #2' -) 'M.2'.\n* **Storage/Expansion (Dashed Box - Q370 only):**\n * 'PCIe #16' connects via 'SATA #3' -) 'SATA Port 3'.\n * 'PCIe #17' connects via 'SATA #4' -) 'SATA Port 4'.\n* **Mini-PCIe:**\n * 'PCIe #5' and 'USB 2.0 #10' connect via 'PCIe x1' and 'USB 2.0' -) 'Mini-PCIe'.](.amitx-cf-i-50-1x017-1000-10/ee41737fe86da5a6cce2986912e2c5bb74c08e4cb613f5c59c2b94cddc1be23c.jpg) Figure 1: AmITX-CF-I Functional Block Diagram This page intentionally left blank. # 3 Mechanical Layout # 3.1 Connector Locations # 3.1.1 Rear I/O Connectors ![LAN\nDP\nCOM\nLine In\nUSB 3.1 Gen 1/2\nHDMI\nDVI\nMIC In\nLine Out](.amitx-cf-i-50-1x017-1000-10/e34b917f2b1c745ddb8f448aac7d721d81227cbe94138109d0d61cd1e429b45c.jpg) Figure 2: AmITX-CF-I Rear I/O # 3.1.2 Component-Side Connectors ![ATX Power\nConnector\nMini PCIe\nLVDS Inverter\nPower Connector\nLVDS\nCase Open\nDebug Header\n4x COM\n8-bit GPIO\nUSB 3.1 Gen 1\nUSB 2.0 Header\n4x/2x SATA\nConnectors\nSPI Header\nATX 12V Power\nConnector\n2x DDR4 SODIMM\nADLINK\nAmITX-CF-I\nRev A\nPCIe x16\nFront Panel\nHeader\nCPU Fan\nSystem Fan\nAudio Header](.amitx-cf-i-50-1x017-1000-10/1f24ff4b229413de87707609ad139a6448bb8da700ea49624d6738d945ccbe5a.jpg) ![Close-up of a blue printed circuit board with integrated circuits and connectors (no readable text or symbols)](.amitx-cf-i-50-1x017-1000-10/4c771828adf62b7ed4e8283d1adb19d008a3d4a78930050a6405ed2d8404e3f1.jpg) M.2 Figure 3: AmITX-CF-I Component-Side Connectors # 3.2 Mechanical Dimensions Top View ![| Dimension | Value |\n| --------- | ------- |\n| Width | 6.35 |\n| Height | 163.65 |\n| Base | 157.48 |\n| Top Width | 136.98 |\n| Bottom Width | 33.02 |\n| Total Width | 154.94 |\n| Total Height | 159.84 |\n| Total Height | 10.16 |](.amitx-cf-i-50-1x017-1000-10/bb55b6a5cf6cf83699ec8e8688de845a6a0b54698e883bda798cbc51556a8d25.jpg) Dimensions: mm Rear View ![FOXCONN\n37.45\n1.6](.amitx-cf-i-50-1x017-1000-10/354839fbdc4c5228311d07a727c69069007835d05e552a6f30f73eaa44cfbbd9.jpg) Dimensions: mm Figure 4: AmITX-CF-I Mechanical Dimensions # 3.3 Thermal Solutions

LGA1150 CPU Cooler, H=30.0mm, 45WStandard Temp.: 0°C to 60°CP/N: 32-20513-0000	<img src="images/20704a6d1802bb068ee207a815edb0b3507da4669b7107c91512a1e1a3e593ad.jpg"/>
LGA1150 CPU Cooler, H=46.05mm, 45WStandard Temp.: 0°C to 60°CP/N: 32-20512-0000	<img src="images/80d041956fc89672e2320b8eec7c001b73232bb8255389237df2813d5e206300.jpg"/>
LGA1150 CPU Cooler, H=50.2mm, 95WStandard Temp.: 0°C to 60°CP/N: 32-20113-0000	<img src="images/09b8d1a36f030dfe5700a0f611ae855b0b0972add8db5530a3f6b2444bd144d4.jpg"/>
LGA1150 CPU Cooler, H=61.4mm, 95WStandard Temp.: 0°C to 60°CP/N: 32-20495-0000	<img src="images/5b74cb3eab88b27c9cdbdf5b46a7fc2a5edcc3b968f2a4d5ad8630997e0ea809.jpg"/>

This page intentionally left blank. # 4 Connectors and Jumpers See 3.1 Connector Locations on page 9. # 4.1 Rear IO Connectors # 4.1.1 DisplayPort One DisplayPort v1.2 specification port1 up to 4096 x 2304 @ 60Hz

Pin	Signal	Pin	Signal
1	DP1_CON_DP0	2	GND
3	DP1_CON_DN0	4	DP1_CON_DP1
5	GND	6	DP1_CON_DN1
7	DP1_CON_DP2	8	GND
9	DP1_CON_DN2	10	DP1_CON_DP3
11	GND	12	DP1_CON_DN3
13	DP1_HDMI_DNG_DET	14	DP_CFG2
15	DP1_CON_AUXP	16	GND
17	DP1_CON_AUXN	18	DP1_CON_HPD
19	GND	20	+3.3V

# 4.1.2 HDMI One HDMI 1.4 specification port up to 4096 x 2160 @ 30 Hz

Pin	Signal	Pin	Signal
1	HDMI1_CON_DP2	2	GND
3	HDMI1_CON_DN2	4	HDMI1_CON_DP1
5	GND	6	HDMI1_CON_DN1
7	HDMI1_CON_DP0	8	GND
9	HDMI1_CON_DN0	10	HDMI1_CON_CKP
11	GND	12	HDMI1_CON_CKN
13	N/C	14	N/C
15	HDMI1_DDC_CLK	16	HDMI1_DDC_DATA
17	GND	18	+5V
19	HDMI1_CON_HPD

![This is a black and white technical line drawing of a rectangular connector housing. Inside the housing are two parallel vertical columns of small squares representing pins. The left column is labeled with the number '1' at the top and '19' near the bottom. The right column is labeled with the number '2' at the top and '20' near the bottom. There are small rectangular notches on the left and right sides of the outer casing, and a larger rectangular cutout is centered at the bottom.](.amitx-cf-i-50-1x017-1000-10/fead632804667c95b8fb4cf28c0926794e958050c454f1f0ea509a57bdce28e4.jpg) ![19 17\n3 1\n18\n2](.amitx-cf-i-50-1x017-1000-10/9035c29b4eccba8f67c8f7ff787f4b3a4bc89b3cf2a2a7eee736ce9c35e4ba37.jpg) # 4.1.3 DVI One DVI-D port up to 1920 x 1200 @ 60 Hz

Pin	Signal	Pin	Signal
1	DVI1_CON_DN2	13	N/C
2	DVI1_CON_DP2	14	+5V
3	GND	15	GND
4	N/C	16	DVI1_B_HPD
5	N/C	17	DVI1_CON_DN0
6	DVI1_DDC_CLK	18	DVI1_CON_DP0
7	DVI1_DDC_DATA	19	GND
8	N/C	20	N/C
9	DVI1_CON_DN1	21	N/C
10	DVI1_CON_DP1	22	GND
11	GND	23	DVI1_CON_CKP
12	N/C	24	DVI1_CON_CKN

![1 2 3\n24](.amitx-cf-i-50-1x017-1000-10/ad1b955f0f61863537694bfe1a5bccf6a587dc88d2df8ed47470fbcc4893c874.jpg) # 4.1.4 Ethernet Connectors (LAN1, LAN2) Dual 10/100/1000Mbit/s LAN Ethernet controllers based on Realtek RTL8111G, supporting PXE and WOL over both LANs

Pin	10BASE-T/100BASE-TX	1000BASE-T
1	TX+	LAN_MDI0+
2	TX-	LAN_MDI0-
3	RX+	LAN_MDI1+
4	--	LAN_MDI2+
5	--	LAN_MDI2-
6	RX-	LAN_MDI1-
7	--	LAN_MDI3+
8	--	LAN_MDI3-

![The image displays a schematic line drawing of an RJ45 Ethernet connector. At the top, the text **LED1** and **LED2** labels two small rectangular boxes situated above the connector housing. At the bottom, the numbers **8** and **1** are positioned on the left and right respectively, with thin lines pointing from **8** to the far-left pin and from **1** to the far-right pin of the central connector block.](.amitx-cf-i-50-1x017-1000-10/4669d52750c6f8f9098acea2d89e184f0652540c9c911747f68d4f8a608252bf.jpg) LED Behavior

LED1 (Link/Activity)		LED2 (Speed)
Status	Description	Status	Description
Off	10 Mb connection	Off	No Link
Orange	100 Mb connection	Green	Linked
Green	1 Gb connection	Blanking	Data Activity

# 4.1.5 USB Connectors (USB12, USB34) 4x USB 3.1 Gen2 (H310: USB 3.1 Gen1) ■ 5V supply for external devices ■ 5Vsb is supplied during power down to allow wakeup on USB device activity during S3\~S4 state ■ 1.5A for device power supply protected by a resettable 2A fuse

Pin	Signal
1	+5VDC
2	USB_N
3	USB_P
4	GND
5	USB3_RX_N
6	USB3_RX_P
7	GND
8	USB3_TX_N
9	USB3_TX_P

![The image displays a technical line drawing of a connector housing, viewed from the rear. It features a rectangular outline with rounded corners and side mounting tabs. Inside the housing, pin locations are indicated by rectangular indentations labeled with numbers.\n\nOn the left side, there are four vertical rectangular indentations labeled **1**, **2**, **3**, and **4** from top to bottom.\n\nOn the right side, there is a column of indentations. From bottom to top, they are labeled **5**, **6**, and **7**. Above pin 7, near the top right corner, there are two smaller indentations side-by-side labeled **9** (left) and **8** (right). All numbers are oriented upright.](.amitx-cf-i-50-1x017-1000-10/77d03c037e3757f5d49605a214879ae68ab4c0b14b26a042d549237e2f00328d.jpg) # 4.1.6 Serial COM Port Connector (COM1) COM1 supports RS-232/422/485, selected in BIOS. RS-232

Pin	Signal	Pin	Signal
1	DCD#	6	DSR#
2	RXD	7	RTS#
3	TXD	8	CTS#
4	DTR#	9	RI#
5	GND

![1 2\n9](.amitx-cf-i-50-1x017-1000-10/0ae5c02e4db32b494909c3a1b90e94ae83b21064c6a614ba7a48ada35376e581.jpg) RS-422

Pin	Signal	Pin	Signal
1	TXD422-	6	N/S
2	TXD422+	7	N/S
3	RXD422+	8	N/S
4	RXD422-	9	N/S
5	N/S

RS-485

Pin	Signal	Pin	Signal
1	485DATA-	6	N/S
2	485DATA+	7	N/S
3	N/S	8	N/S
4	N/S	9	N/S
5	N/S

# 4.1.7 Audio Connectors • One Line-out, one Line-in, and one Mic-in on rear I/O • Realtek ALC892 codec # 4.2 Internal Connectors # 4.2.1 ATX Power Connector (EATXPWR1) AmITX-CF-I supports a standard 24-pin ATX Power Connector (EATXPWR1).

Pin	Signal	Pin	Signal
1	+3.3V	13	+3.3V
2	+3.3V	14	-12V
3	GND	15	GND
4	+5V	16	PS-ON# (power supply remote on/off)
5	GND	17	GND
6	+5V	18	GND
7	GND	19	GND
8	PWRGD (Power Good)	20	-5V
9	+5V (Standby)	21	+5V
10	+12V	22	+5V
11	+12V	23	+5V
12	+3.3V	24	GND

![1\n2\n24](.amitx-cf-i-50-1x017-1000-10/937b9ef4e7433ae7af014bd3ca83db271919fef627f0ff775e55c16f3bdeeb2d.jpg) # 4.2.2 ATX 12V Power Connector (ATX12V1)

Pin	Signal	Pin	Signal
2	GND	3	+12V or 16V~24V DC
1	GND	4	+12V or 16V~24V DC

![The image displays a schematic diagram featuring four square modules arranged in a two-by-two grid. Each module consists of an outer square with chamfered corners and a smaller, centered square inside.\n\nSurrounding the grid are numbers:\n* On the left side, the number **3** is above the number **4**, connected by a vertical bracket.\n* On the right side, the number **1** is above the number **2**.](.amitx-cf-i-50-1x017-1000-10/e181959d009ac9d69c124a715497ab08877f78bf7b9c1c9e1d559aa2378fa3c8.jpg) # 4.2.3 SATA Connectors (SATA1/2/3/4) Four SATA 6 Gbps ports are available on AmITX-CF-I (H310: 2x SATA).

Pin	Signal
1	GND
2	TXP
3	TXN
4	GND
5	RXN
6	RXP
7	GND

![This image displays a black-and-white technical line drawing of a vertical rectangular component. On the right side, the number **1** is positioned near the top, indicating the outer frame. Lower down on the right, the number **7** labels a central vertical element. This element features a vertical dashed line running through its center, appearing as a series of alternating black and white segments. To the left of this central strip is a small, solid rectangular protrusion. The top and bottom of the main rectangle show L-shaped structural details or notches.](.amitx-cf-i-50-1x017-1000-10/b59ea4e4aa8fe94995421cd1876f2f052e7a8a330e3d4417ee3ba05c60433641.jpg) # 4.2.4 USB 2.0 Header (USB78) 2x USB 2.0. 2x5-pin 2.54mm pitch header.

Pin	Signal	Pin	Signal
1	+5VDC	2	+5VDC
3	D-	4	D-
5	D+	6	D+
7	GND	8	GND
9	KEY (no pin)	10	GND

![The image displays a schematic symbol for a 10-pin integrated circuit.\n\n**Text:**\nThe numbers 1, 3, 5, 7, and 9 are arranged vertically on the left side. The numbers 2, 4, 6, 8, and 10 are arranged vertically on the right side.\n\n**Visuals:**\n- A central rectangular body represents the IC package.\n- Horizontal lines (pins) extend from the sides of the rectangle towards the corresponding numbers.\n- Inside the rectangle, black markings are arranged in rows corresponding to the pins:\n - **Top row:** A black square on the left and a black square on the right.\n - **Second row:** A black circle on the left and a black circle on the right.\n - **Third row:** A black circle on the left and a black circle on the right.\n - **Fourth row:** A black circle on the left and a black circle on the right.\n - **Bottom row:** A black circle on the right side (aligned with pin 10). The left side of the bottom row is empty.](.amitx-cf-i-50-1x017-1000-10/a9b5656cb6aa2cf470a0129338b184955e017cf52b414a556be6ec0c50d774e0.jpg) # USB Cable (optional): USB 2.0 Header to 2x Female Type-A Cable (length 150mm), P/N: 30-21625-0000-B0 ![Pure electrical connector diagram showing internal cable and terminal connections without any text or symbols](.amitx-cf-i-50-1x017-1000-10/8ba9e3409b7c0bd87eac5b7ef24e44c989b8da612b66016b39016af9a77cdcab.jpg) # 4.2.5 USB 3.0 Connector (USB56) 2x USB 3.1 Gen1 (H310: not available). 2x10-pin 2.00mm pitch standard wafer connector.

Pin	Signal	Pin	Signal
1	+5VDC	11	USB_P6
2	USB3_RX_N7	12	USB_N6
3	USB3_RX_P7	13	GND
4	GND	14	USB3_TX_P8
5	USB3_TX_N7	15	USB3_TX_N8
6	USB3_TX_P7	16	GND
7	GND	17	USB3_RX_P8
8	USB_N5	18	USB3_RX_N8
9	USB_P5	19	+5VDC
10	N/C	20	KEY (no pin)

![19\n18\n17\n16\n15\n14\n13\n12\n11\n1\n2\n3\n4\n5\n6\n7\n8\n9\n10](.amitx-cf-i-50-1x017-1000-10/ba80ab8846b950a53c120cae625710312ec3b506a987e8ef167af67f7e1dcad0.jpg) # USB Cable (optional): USB 3.0 Header to 2x Female Type-A Cable (length 150mm), P/N: 30-21597-1000-A0 ![Technical line drawing of a mechanical component with no visible text or symbols](.amitx-cf-i-50-1x017-1000-10/848b3e6b5c23f69d238c5e91487441cbb6dbfa6c9591085355d3953a96410b30.jpg) # 4.2.6 Internal Audio Header (FP\_AUDIO1) 2x5-pin 2.54mm pitch header

Pin	Signal	Pin	Signal
1	MIC2L	2	GND
3	MIC2R	4	PRESENCE# (Dongle present)
5	INE2R	6	MIC2-JD
7	SENSE_SEND (Jack detection)	8	KEY (no pin)
9	LINE2L	10	LINE2-JD

![The image displays a diagram of a 10-pin connector layout arranged in a 5x2 grid. The numbers 1, 3, 5, 7, and 9 are listed in a left column, while the numbers 2, 4, 6, 8, and 10 are listed in a right column.\n\nCorresponding to each number is a pin representation:\n- **Pin 1:** A solid black square.\n- **Pin 8:** A hollow white circle.\n- **Pins 2, 3, 4, 5, 6, 7, 9, and 10:** Solid black circles.](.amitx-cf-i-50-1x017-1000-10/86c7fdfd815e0c6c23c8b95dbfe53305be021bdca2ed2ab1bea349017517d98a.jpg) # 4.2.7 CPU Fan and System Fan Connectors (CPU\_FAN1, SYS\_FAN1)

Pin	Signal	Description
1	GND	Ground
2	+12 V	FAN Power
3	Tach	FAN Tachometer
4	PWM	FAN PWM

![The image displays a vertical rectangular outline. Inside, on the left, are two parallel vertical lines. On the right side within the rectangle is a column consisting of a small square at the top, followed by three solid black circles. To the right of this column, the numbers 1, 2, 3, and 4 are listed vertically.](.amitx-cf-i-50-1x017-1000-10/aa16acd19e679c5f6885f6a0305ab57c18b7a14c2de69a4ab3c9f209a96a27ae.jpg) # 4.2.8 Serial COM Port Connector (COM2/3/4/5) Four internal Serial Port (COM2-4). Serial Ports are over-current protected. 2x5-pin 2.00mm pitch standard wafer connector.

Serial Port	Functions
COM2	Supports RS-232
COM3	Supports RS-232
COM4	Supports RS-232
COM5	Supports RS-232

RS-232

Pin	Signal	Pin	Signal
1	DCD	2	RXD#
3	TXD#	4	DTR
5	GND	6	DSR
7	RTS	8	CTS
9	RI	10	KEY

![The image displays a schematic diagram of a connector, specifically a DE-9 (DB9) connector.\n\n**Text:**\n* **Left Column:** The numbers 1, 3, 5, 7, 9 are listed vertically.\n* **Right Column:** The numbers 2, 4, 6, 8 are listed vertically.\n\n**Visual Content:**\nInside a vertical rectangular outline representing the connector housing:\n* **Top Left:** A solid black square (corresponding to pin 1).\n* **Top Right:** A solid black circle (corresponding to pin 2).\n* **Middle Rows:** Pairs of solid black circles corresponding to pins 3/4, 5/6, and 7/8.\n* **Bottom Left:** A solid black circle (corresponding to pin 9).\n* **Bottom Right:** An unnumbered circle outline (white inside, black border).](.amitx-cf-i-50-1x017-1000-10/912a7e90e8c48d8d75a84fc5d9694003d42acf894ac34f595c14eff85a5fbdf7.jpg) # COM Cable (optional): COM Port Cable (length 200mm), P/N: 30-10297-0000-B0 ![Diagram of a long black cable with multiple white connectors, connected to a terminal block (no text or symbols present)](.amitx-cf-i-50-1x017-1000-10/2e9458682cf9c5515128d4d5fd65457e8155bdf8ae1b19c1adddbe78d13fce6d.jpg) # 4.2.9 LVDS (JLVDS1) 2x20-pin 1.25mm pitch connector

Pin	Signal	Pin	Signal
1	VDD_LVDS	2	VDD_LVDS
3	GND	4	GND
5	VDD_LVDS	6	VDD_LVDS
7	LVDS_A0-	8	LVDS_B0-
9	LVDS_A0+	10	LVDS_B0+
11	GND	12	GND
13	LVDS_A1-	14	LVDS_B1-
15	LVDS_A1+	16	LVDS_B1+
17	GND	18	GND
19	LVDS_A2-	20	LVDS_B2-
21	LVDS_A2+	22	LVDS_B2+
23	GND	24	GND
25	LVDS_A_CLK-	26	LVDS_B_CLK-
27	LVDS_A_CLK+	28	LVDS_B_CLK+
29	GND	30	GND
31	DDC_CLK	32	DDC_DATA
33	GND	34	GND
35	LVDS_A3-	36	LVDS_B3-
37	LVDS_A3+	38	LVDS_B3+
39	LCDS_VDD_EN	40	N/C

![2\n4\n6\n8\n10\n12\n14\n16\n18\n20\n22\n24\n26\n28\n30\n32\n34\n36\n38\n40\n1\n3\n5\n7\n9\n11\n13\n15\n17\n19\n21\n23\n25\n27\n29\n31\n33\n35\n37\n39](.amitx-cf-i-50-1x017-1000-10/2239346b66680c532d5e416d60755b53891dfa38d888b03b878719fdad2c6485.jpg) # 4.2.10 LVDS Inverter Power Connector (JBKL1) 1x5-pin 2.00 mm pitch standard wafer connector

Pin	Signal
1	+12V
2	GND
3	BKL_EN
4	BRIGHT
5	+5V

![The image displays a vertical diagram. On the left, there is a black border enclosing a white area. Inside this white area is a black square at the top, followed by four black circles arranged in a vertical column below it. To the right of these shapes is a column of numbers 1, 2, 3, 4, and 5. The number 1 is aligned with the square, while the numbers 2, 3, 4, and 5 are aligned with the corresponding circles from top to bottom.](.amitx-cf-i-50-1x017-1000-10/c3e0df7b6e8cf9fe0e0eb0ba0937ee7783c3e00c893b0b32b781fe1c96b60f22.jpg) # 4.2.11 Front Panel Header (F\_PANEL1) 2x5-pin 2.54mm pitch header The front panel connector provides Audio Mic-In / Line Out, ATX power switch, Reset, HDD LED, and active LED, and system LED.

Pin	Signal	In/Out	Description	Pin	Signal	In/Out	Description
HDD Activity LED				Power LED
10	HD_PWR	Out	Hard disk LEDPull-up to +5V	9	PLED_PWR	Out	Power LEDPull-up to +5V
8	HDA#	Out	Hard disk active LED	7	SUPLED	Out	Front panel active LED
Reset Switch				On/Off Switch
6	GND		Ground	5	PANSWIN#	In	Power switch
4	FP_RESET#	In	Reset switch	3	GND		Ground
Not connected				Not connected
2	N/C			1	KEY		No Pin

![The image displays a schematic diagram of a connector pinout. On the left side, the numbers 10, 8, 6, 4, and 2 are arranged vertically. On the right side, the numbers 9, 7, 5, and 3 are arranged vertically.\n\nFive rows of pins are depicted as black dots:\n- The top four rows each contain two dots: one aligned with a number on the left and one aligned with a number on the right.\n- The bottom row contains a single dot aligned with the number 2 on the left.\n\nThe diagram is enclosed within a vertical rectangular outline featuring small notches or cutouts on the left and right sides of the upper rows.](.amitx-cf-i-50-1x017-1000-10/985e96a920f6e93b89b0a66713d08b8b21e58884b3bd87042c0370309a7dd4fd.jpg) # 4.2.12 Case Open Connector (JCASE1) 1x2-pin 2.5mm pitch standard wafer connector

Pin	Signal	Description
1	CASEOP#	Case open signal
2	GND	Ground

![The image displays the numbers '1' and '2' stacked vertically on the left side. To their right is a large, thick, black, blocky graphic that resembles a stylized letter 'B' or a simplified battery icon. Inside the upper loop of this shape is a black rectangle, and inside the lower loop is a black circle.](.amitx-cf-i-50-1x017-1000-10/92af89418e1edd17534835858ca8545d94022c7e96fd4041399e4621d882d8fc.jpg) # 4.2.13 SPI Header (SPI1) 2x4-pin 2.54mm pitch header

Pin	Signal	Pin	Signal
1	VCC3	2	GND
3	SPI_CS#	4	SPI_CLK
5	SPI_MISO	6	SPI_MOSI
7	HOLD#	8	KEY

![The image displays a schematic diagram of a keypad or button panel. On the left side, the numbers 1, 3, 5, and 7 are arranged vertically. On the right side, the numbers 2, 4, and 6 are arranged vertically.\n\nCorresponding to these numbers are rows of buttons:\n* **Top Row:** A black square next to the number 1 and a black circle next to the number 2.\n* **Second Row:** A black circle next to the number 3 and a black circle next to the number 4.\n* **Third Row:** A black circle next to the number 5 and a black circle next to the number 6.\n* **Bottom Row:** A black circle next to the number 7, and to its right (below number 6), a white circle with a black outline.](.amitx-cf-i-50-1x017-1000-10/3116cbd6beadc0fb3125f256972ce51d68e77634580ed05eb94ebe555d858c77.jpg) # 4.2.14 8-bit GPIO (JDIO1) 2x6-pin 2.00mm pitch header

Pin	Signal	Pin	Signal
1	GPIO0	2	GPIO4
3	GPIO1	4	GPIO5
5	GPIO2	6	GPIO6
7	GPIO3	8	GPIO7
9	SMBCLK	10	SMBDATA
11	GND	12	+3.3VDC

![The image displays a schematic diagram of a connector or switch module enclosed in a black rectangular border. There are two columns of terminals numbered 1 through 12.\n\n- **Left Column:** The numbers 1, 3, 5, 7, 9, and 11 are listed vertically.\n- **Right Column:** The numbers 2, 4, 6, 8, 10, and 12 are listed vertically.\n\nEach row corresponds to a pair of terminals with icons indicating their status:\n- **Top Row (1 & 2):** The left icon is a solid black square, and the right icon is a solid black circle.\n- **Remaining Rows (3-12):** In all five subsequent rows, both the left and right icons are solid black circles.](.amitx-cf-i-50-1x017-1000-10/c361e1535c02ae00afe5ad35f7d3ea7277b0aa66db15d33230bf61053c8d05a3.jpg) # 4.2.15 Debug Header (JLPC1) 2x6-pin 2.00mm pitch header

Pin	Signal	Pin	Signal
1	N/C	2	VCC3
3	LPC_AD3	4	PLTRST
5	LPC_AD1	6	LPC_AD2
7	LPC_FRAME	8	LPC_AD0
9	KEY	10	GND
11	CLK24M	12	GND

![This image displays a schematic pinout diagram for a 12-pin integrated circuit (IC) package.\n\nOn the left side, the numbers **1**, **3**, **5**, **7**, and **11** are listed vertically.\nOn the right side, the numbers **2**, **4**, **6**, **8**, **10**, and **12** are listed vertically.\n\nNext to each number is a small rectangular tab extending from the central body. Inside the central body, corresponding to each pin location, is a shape:\n* Next to number **1**, there is a solid black square.\n* Next to numbers **2** through **12**, there are solid black circles.](.amitx-cf-i-50-1x017-1000-10/90b63b8df8a00bf41d4e1ee787a9a78e1cf75c410c77bc100b96794abd0f1c69.jpg) # 4.3 Jumper and Switch Settings ![ATX/AT Mode\nJumper (JPSON1)\nLVDS PWN/LINEAR\nSelection (JBKL2)\nLVDS Power Selection\n(JLVDSVDD1)\nLVDS Brightness\nPower Selection\n(JBKLVOL1)\nClear CMOS\n(CLCMOS1)](.amitx-cf-i-50-1x017-1000-10/68e35ee76082369520969a2bf25477f1d292a3157fe743f3c58a5db1a573b038.jpg) Figure 5: Jumper and Switch Locations # 4.3.1 ATX/AT Mode Jumper Selection (JPSON1)

JPSON1	ATX/AT Mode
1-2	AT
2-3	ATX (default)

# 4.3.2 Clear CMOS (CLCMOS1)

CLCMOS1	Clear CMOS
1-2	Normal (default)
2-3	Clear CMOS

# 4.3.3 LVDS Brightness Power Selection (JBKLVOL1)

JBKLVOL1	Brightness
1-2	5V
2-3	3.3V (default)

# 4.3.4 LVDS Power Selection (JLVDSVDD1)

JLVDSVDD1	Signal
3-5	3.3V (default)
1-3	5V
3-4	12V

![The image displays a diagram with numbers and geometric shapes arranged in three horizontal rows.\n\n**Top Row:**\n- On the left is the number **6**.\n- On the right is the number **5**.\n- In the center are two black circles.\n\n**Middle Row:**\n- On the left is the number **4**.\n- On the right is the number **3**.\n- In the center are two black circles.\n\n**Bottom Row:**\n- On the left is the number **2**.\n- On the right is the number **1**.\n- In the center, there is a black circle on the left and a black square on the right.](.amitx-cf-i-50-1x017-1000-10/4c1e3f60529f55103d994457c7661330ad0cc9418a3f1582179dc73fbe2a4ed2.jpg) # 4.3.5 LVDS PWM/LINEAR Selection (JBKL2)

JBKL2	LVDS PWM/LINEAR
1-2	Linear mode (default)
No	PWM mode

This page intentionally left blank. # 5 Driver Installation Drivers can be downloaded through the following link. https://www.adlinktech.com/Products/Industrial\_Motherboards\_SBCs/Mini-ITXEmbeddedBoards/AmITX-CF-I This page intentionally left blank. # 6 System Resources # 6.1 System Memory Map Table 2: System Memory Map

Hex Range	Device
A0000-BFFFF	Intel UHD Graphic 630
A0000-BFFFF	PCI Express Root Complex
40000000-403FFFFFF	Motherboard resources
90000000-9FFFFFFF	Intel UHD Graphic 630
90000000-DFFFFFFF	PCI Express Root Complex
A0000000-A0003FFF	Realtek PCIe GbE Family Controller
A0000000-A00FFFFFF	Intel PCI Express Root Port #12
A0100000-A0103FFF	Realtek PCIe GbE Family Controller #2
A0100000-A01FFFFFF	Intel PCI Express Root Port #11
A1000000-A1FFFFFFF	Intel UHD Graphic 630
A2000000-A20FFFFFF	High Definition Audio Controller
A2100000-A2100FFF	Realtek PCIe GbE Family Controller
A2100000-A21FFFFFF	Intel PCI Express Root Port #12
A2200000-A2200FFF	Realtek PCIe GbE Family Controller #2
A2200000-A22FFFFFF	Intel PCI Express Root Port #11
A2300000-A230FFFF	Intel USB3.1 eXtensible Host Controller
A2310000-A2313FFF	High Definition Audio Controller
A2314000-A2315FFF	Intel 300 Series Chipset Family SATA AHCI Controller
A2316000-A2317FFF	PCI standard RAM Controller
A2318000-A23180FF	Intel SMBus
A2319000-A23197FF	Intel 300 Series Chipset Family SATA AHCI Controller
A231A000-A231A0FF	Intel 300 Series Chipset Family SATA AHCI Controller
A231B000-A231BFFF	Intel Management Engine Interface
A231C000-A231CFFF	PCI standard RAM Controller
A231D000-A231DFFF	Intel Thermal Subsystem
E0000000-EFFFFFFF	Mother resources
FC800000-FE7FFFFFF	PCI Express Root Complex
FD000000-FD69FFFF	Mother resources
FD6A0000-FD6AFFFF	Intel Serial IO GPIO Host Controller
FD6B0000-FD6BFFFF	Intel Serial IO GPIO Host Controller
FD6C0000-FD6CFFFF	Mother resources
FD6D0000-FD6DFFFF	Intel Serial IO GPIO Host Controller
FD6E0000-FD6EFFFF	Intel Serial IO GPIO Host Controller
FD6F0000-FDFFFFFF	Mother resources
FE000000-FE01FFFF	Mother resources
FE010000-FE010FFF	Intel SPI Controller
FE200000-FE7FFFFFF	Mother resources
FED00000-FED003FF	High precision event timer
FED10000-FED17FFF	Mother resources
FED18000-FED18FFF	Mother resources
FED19000-FED19FFF	Mother resources
FED20000-FED3FFFF	Mother resources
FED45000-FED8FFFF	Mother resources
FED90000-FED93FFF	Mother resources
FED90000-FED93FFF	Mother resources
FEE00000-FEEFFFFFF	Mother resources
FF000000-FFFFFFFF	Mother resources

# 6.2 I/O Map Table 3: I/O Map

Hex Range	Device
0000-0C7F	PCI Express Root Complex
0020-0021	Programmable interrupt controller
0024-0025	Programmable interrupt controller
0028-0029	Programmable interrupt controller
002C-002D	Programmable interrupt controller
002E-002F	Motherboard Resources
0030-0031	Programmable interrupt controller
0034-0035	Programmable interrupt controller
0038-0039	Programmable interrupt controller
003C-003D	Programmable interrupt controller
0040-0043	System Timer
004E-004F	Motherboard Resources
0050-0053	System Timer
0061-0061	Motherboard Resources
0063-0063	Motherboard Resources
0065-0065	Motherboard Resources
0067-0067	Motherboard Resources
0070-0070	Motherboard Resources
0080-0080	Motherboard Resources
0092-0092	Motherboard Resources
00A0-00A1	Programmable interrupt controller
00A4-00A5	Programmable interrupt controller
00A8-00A9	Programmable interrupt controller
00AC-00AD	Programmable interrupt controller
00B0-00B1	Programmable interrupt controller
00B2-00B3	Motherboard resources
00B4-00B5	Programmable interrupt controller
00B8-00B9	Programmable interrupt controller
00BC-00BD	Programmable interrupt controller
00F0-00F0	Numeric data processor
0280-028F	Motherboard resources
0290-029F	Motherboard resources
02A0-02AF	Motherboard resources
02B0-02BF	Motherboard resources
02E0-02E7	COM5
02E8-02EF	COM4
02F8-02FF	COM2
03B0-03BB	Intel UHD Graphic 630
03C0-03DF	Intel UHD Graphic 630
03E8-03EF	COM3
03F8-03FF	COM1
04D0-04D1	Programmable interrupt controller
0680-069F	Motherboard resource
0D00-FFFF	PCI Express Root Complex
164E-164F	Motherboard resource
1800-18FE	Motherboard resource
1854-1857	Motherboard resource
2000-20FE	Motherboard resource
3000-30FF	Realtek PCIe GbE Family Controller
3000-3FFF	Intel PCI Express Root Port #12
4000-40FF	Realtek PCIe GbE Family Controller #2
4000-4FFF	Intel PCI Express Root Port #11
5000-503F	Intel UHD Graphic 630
5060-507F	Intel 300 Series Chipset Family SATA AHCI Controller
5080-5083	Intel 300 Series Chipset Family SATA AHCI Controller
5090-5097	Intel 300 Series Chipset Family SATA AHCI Controller
EFA0-EFBF	Intel SMBus

# 6.3 Interrupt Request (IRQ) Map Table 4: IRQ Map

IRQ#	Device
0	System timer
3	COM2
4	COM1
5	COM3
5	COM4
10	COM5
11	Intel SMBus
11	Intel Thermal Subsystem
13	Numeric data processor
14	Intel Serial IO GPIO Host Controller
16	HD Audio Controller

# 7 BIOS Setup # 7.1 Menu Structure This section presents the six primary menus of the BIOS Setup Utility. Use the following table as a quick reference for the contents of the BIOS Setup Utility. The subsections in this section describe the submenus and setting options for each menu item. The default setting options are presented in bold, and the function of each setting is described in the right hand column of the respective table.

Main	Advanced	Chipset	Security	Boot	Save & Exit
- BIOS Information- Memory Information- Power Type- System Date- System Time	▶CPU Configuration▶PCH-FW Configuration▶ACPI Settings▶NCT6106D Super IO Configuration▶NCT6106D HW Monitor▶S5 RTC Wake Settings▶Serial Port Console Redirection▶Intel TXT Information▶USB Configuration▶CSM Configuration▶Network Stake Configuration	▶System Agent (SA) Configuration▶PCH-IO Configuration	- Administrator Password- User Password▶Secure Boot	- Setup Prompt Timeout- Bootup NumLock State- Quiet Boot- Support Native Resolution- Boot Mode- Boot Option #1- Boot Option #2- Boot Option #3- Boot Option #4- Boot Option #5- Boot Option #6- Boot Option #7	- Save Changes and Exit- Discard Changes and Exit- Save Changes and Reset- Restore Defaults- Launch EFI Shell from filesystem device

# Notes: ▶ indicates a submenu Gray text indicates info only Bold italics font indicates default setting # 7.2 Main The Main Menu provides read-only information about your system and also allows you to set the System Date and Time. Refer to the tables below for details of the submenus and settings. 7.2.1 System Information

Feature	Options	Description
BIOS Information
BIOS Vendor	American Megatrends
Core Version	5.13 0.45 x64
Compliancy	UEFI 2.7; PI 1.6
Project Version	AmITX-CF-I-xxxx_xxxxx
Build Date and Time	Info only
Access Level	Administrator
Memory Information
Total Memory	Info only
Memory Frequency	Info only
Power Type	x Mode
System date	xxx mm/dd/yyyy	Set the Data. Use Tab to switch between Data elements.
System Time	hh:mm:ss	Set the Time. Use Tab to switch between Time elements.

# 7.3 Advanced This menu contains the settings for most of the user interfaces in the system.

Feature	Options	Description
CPU Configuration		CPU Configuration Parameters.
PCH-FW Configuration		Configure Management Engine Technology Parameters.
ACPI Setting		System ACPI Parameters.
NCT6106D Super IO Configuration		System Super IO Chip Parameters.
NCT6106D HW Monitor		Monitor hardware status.
S5 RTC Wake Settings		Enable system to wake from S5 using RTC alarm.
Serial Port Console Redirection		Serial Port Console Redirection.
Intel TXT Information		Display Intel TXT Information.
USB Configuration		USB Configuration Parameters.
CSM Configuration		CSM configuration: Enable/Disable, Option ROM execution settings, etc.
Network Stack Configuration		Network Stack Setting.

7.3.1 CPU Configuration

Feature	Options	Description
CPU Configuration
Type	Info only
ID	Info only
Speed	Info only
L1 Data Cache	Info only
L1 Instruction Cache	Info only
L2 Cache	Info only
L3 Cache	Info only
L4 Cache	Info only
VMX	Info only
SMX/TXT	Info only
C6DRAM	DisabledEnabled	Enabled/Disabled moving of DRAM contents to PRM memory when CPU is in C6 state.
Software Guard Extensions	Disabled	Enabled/Disabled Software Guard Extensions (SGX)..
(SGX)	EnabledSoftware Controlled
Select Owner EPOCH input type	No Change in Owner ECOPHsChange to New Random Owner ECOPHsManual User Defined Owner OPCHs	There are three Owner EPOCH modes (Each EPOCH is 64bit): no change in owner epoch, change to new random owner epoch and manually entered by user. After generating new epoch via ‘Change to New Random Owner EPOCHs’, the selection reverts back to ‘No Change in Owner Epochs’, this is to ensure Epoch stays same.
Intel (VMX) Virtualization Technology	DisabledEnabled	When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology.
Active Processor Cores	All12345	Number of cores to enable in each processor package.
Hyper-Threading	DisabledEnabled	Enabled for Windows and Linux (OS optimized for Hyper-Threading Technology) and Disabled for other OS (OS not optimized for Hyper-Threading Technology)
Intel Trusted Execution Technology	DisabledEnabled	Enable utilization of additional hardware capabilities provided by Intel Trusted Execution Technology. Changes require a full power cycle to take effect.
Intel(R) SpeedStep(tm)	DisabledEnabled	Allows more than two frequency ranges to be supported.
Turbo Mode	DisabledEnabled	Enable/Disable processor Turbo Mode (requires Intel Speed Step or Intel Speed Shift to be available and enabled)
C states	DisabledEnabled	Enable/Disable CPU Power Management. Allows CPU to go to C States when it's not 100% utilized.
Enhanced C-state	DisabledEnabled	Enable/Disable C1E. When enabled, CPU will switch to minimum speed when all cores enter C-State.
Package C state limit	C0/C1C2C3C6C7C7SC8C9C10Cpu DefaultAuto	Maximum Package C State Limit Setting. CPU Default: Leaves to Factory default value. Auto: Initializes to deepest available Package C State Limit.

# 7.3.2 PCH-FW Configuration

Feature	Options	Description
ME Firmware Version	Info only
ME Firmware Mode	Info only
ME Firmware SKU	Info only
ME Firmware Status 1	Info only
ME Firmware Status 2	Info only
ME State	Enabled
ME Lock Control	LockUnLock	ME UnLock switch function.Note: This function will automatic recover setting from UnLock to Lock after power-on system.

# 7.3.3 ACPI Settings

Feature	Options	Description
ACPI Settings
Enable Hibernation	DisabledEnabled	Enable s or Disables System ability to Hibernate (OS/S4 Sleep State). This option may not be effective with some operating systems.
ACPI Sleep State	Suspend DisabledS3 (Suspend to RAM)	Select the highest ACPI sleep state the system will enter when the SUSPEND button is pressed.
S3 Video Repost	DisabledEnabled	Enable or Disable S3 Video Repost.
PCIE# Wake from S5	DisabledEnabled	Enable or disable PCIE to wake the system from S5.

7.3.4 NCT6106D Super IO Configuration

Feature	Options	Description
NCT6106D Super IO Configuration
Super IO Chip	NCT6106D
Serial Port 1 Configuration		Set Parameters of Serial Port 1.
Serial Port 2 Configuration		Set Parameters of Serial Port 2.
Serial Port 3 Configuration		Set Parameters of Serial Port 3.
Serial Port 4 Configuration		Set Parameters of Serial Port 4.
Serial Port 5 Configuration		Set Parameters of Serial Port 5.
WatchDog Count Mode	SecondMinute	WatchDog Count Mode Selection.
WatchDog TimeOut Value	0	Fill WatchDog Timeout Value, 0 means disabled.
Chassis Opened Warning	DisabledEnabled	Select whether to enable Chassis Intrusion Detection.Chassis Intrusion Detection is a utility that can tell whether someone has opened the case (intruded into the chassis).Note: If chassis tamper occurs, you can only enter setup to clear this error.
ErP/EuP S5 Support	DisabledEnabled	Enable/Disable ErP/EuP S5 Support.Note: When MEBx is enable Activate Network Access, this function can not set enable that will cause ME fail on next boot.

7.3.4.1 Serial Port 1 Configuration

Feature	Options	Description
Serial Port 1 Configuration
Serial Port	DisabledEnabled	Enable or Disable Serial Port (COM).
Device Setting	IO=3F8h; IRQ=4;
Change Settings	AutoIO=3F8h; IRQ=4IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12;IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12;IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12;	Select optimal settings for Super IO Device.
COM Mode Select	RS232RS485 Half DuplexRS422 Full Duplex	Configure the COM Port Mode.

7.3.4.2 Serial Port 2 Configuration

Feature	Options	Description
Serial Port 2 Configuration
Serial Port	DisabledEnabled	Enable or Disable Serial Port (COM).
Device Setting	IO=2F8h; IRQ=3;
Change Settings	AutoIO=2F8h; IRQ=3IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12;IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12;IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12;	Select optimal settings for Super IO Device.

7.3.4.3 Serial Port 3 Configuration

Feature	Options	Description
Serial Port 3 Configuration
Serial Port	DisabledEnabled	Enable or Disable Serial Port (COM).
Device Setting	IO=3E8h; IRQ=5;
Change Settings	AutoIO=3E8h; IRQ=5IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12;IO=3E0h; IRQ=3,4,5,6,7,9,10,11,12;IO=2E0h; IRQ=3,4,5,6,7,9,10,11,12;	Select optimal settings for Super IO Device.

7.3.4.4 Serial Port 4 Configuration

Feature	Options	Description
Serial Port 4 Configuration
Serial Port	DisabledEnabled	Enable or Disable Serial Port (COM).
Device Setting	IO=2E8h; IRQ=5;
Change Settings	AutoIO=2E8h; IRQ=5IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12;IO=3E0h; IRQ=3,4,5,6,7,9,10,11,12;IO=2E0h; IRQ=3,4,5,6,7,9,10,11,12;	Select optimal settings for Super IO Device.

7.3.4.5 Serial Port 5 Configuration

Feature	Options	Description
Serial Port 5 Configuration
Serial Port	DisabledEnabled	Enable or Disable Serial Port (COM).
Device Setting	IO=2E0h; IRQ=10;
Change Settings	AutoIO=2E0h; IRQ=10IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12;IO=3E0h; IRQ=3,4,5,6,7,9,10,11,12;IO=2E0h; IRQ=3,4,5,6,7,9,10,11,12;	Select optimal settings for Super IO Device.

7.3.5 NCT6106D HW Monitor

Feature	Options	Description
PC Health Status
Smart Fan		Smart Fan Function page.
SYS temperature	Info only
CPU temperature (PECI)	Info only
SYS_Fan Speed	Info only
CPU_Fan Speed	Info only
VCORE	Info only
+12V	Info only
+5V	Info only
+5VSB	Info only
AVCC	Info only
3VSB	Info only
3VCC	Info only
VBAT	Info only

7.3.5.1 Smart Fan

Feature	Options	Description
Smart Fan Function	DisabledEnabled	Smart Fan Function Enable/Disable.
Smart Fan Mode Configuration		Smart Fan Mode Configuration.

Smart Fan Mode Configuration – SMART FAN IV Mode

Feature	Options	Description
Smart Fan Mode Configuration
SYS Smart Fan Mode	SMART FAN IV Mode	SYS Smart Fan Mode.
FAN Temperature 1	25	Input the SYS Smart Fan IV Temperature 1.
FAN PWM 1	80	Input the SYS Smart Fan IV PWM 2 Value.
FAN Temperature 2	40	Input the SYS Smart Fan IV Temperature 2.
FAN PWM 2	130	Input the SYS Smart Fan IV PWM 2 Value.
FAN Temperature 3	55	Input the SYS Smart Fan IV Temperature 3.
FAN PWM 3	190	Input the SYS Smart Fan IV PWM 3 Value.
FAN Temperature 4	62	Input the SYS Smart Fan IV Temperature 4.
FAN PWM 4	255	Input the SYS Smart Fan IV PWM 4 Value.
FAN Tolerance of Target Temp	5	Fan Tolerance of Target Temp.
FAN Critical Temperature	90	Input the SYS Smart IV Critical Temperature.
FAN Critical Temperature Tolerance	1	Input Tolerance of Critical Temperature (Range:0-7).
CPU Smart Fan Mode	SMART FAN IV Mode	CPU Smart Fan Mode.
FAN Temperature 1	25	Input the CPU Smart Fan IV Temperature 1.
FAN PWM 1	80	Input the CPU Smart Fan IV PWM 2 Value.
FAN Temperature 2	40	Input the CPU Smart Fan IV Temperature 2.
FAN PWM 2	130	Input the CPU Smart Fan IV PWM 2 Value.
FAN Temperature 3	55	Input the CPU Smart Fan IV Temperature 3.
FAN PWM 3	190	Input the CPU Smart Fan IV PWM 3 Value.
FAN Temperature 4	62	Input the CPU Smart Fan IV Temperature 4.
FAN PWM 4	255	Input the CPU Smart Fan IV PWM 4 Value.
FAN Tolerance of Target Temp	5	Fan Tolerance of Target Temp.
FAN Critical Temperature	90	Input the CPU Smart IV Critical Temperature.
FAN Critical Temperature Tolerance	1	Input Tolerance of Critical Temperature (Range:0-7).

Smart Fan Mode Configuration – Manual Mode

Feature	Options	Description
Smart Fan Mode Configuration
SYS Smart Fan Mode	Manual Mode	SYS Smart Fan Mode.
SYS expect PWM Output Voltage	255	SYS Fan expect PWM Output Voltage.
CPU Smart Fan Mode	Manual Mode	SYS Smart CPU Mode.
CPU expect PWM Output Voltage	255	SYS CPU expect PWM Output Voltage.

7.3.6 S5 RTC Wake Settings

Feature	Options	Description
Wake System From S5	DisabledEnabled	Enable or disable System wake on alarm event.

7.3.7 Serial Port Console Redirection

Feature	Options	Description
COM1
Console Redirection	DisabledEnabled	Console Redirection Enable or Disable.
Console Redirection Settings		The settings specify how the host computer and the remote computer (which the user is using) will exchange data. Both computers should have the same or compatible settings.

7.3.7.1 Console Redirection Settings

Feature	Options	Description
COM1
Console Redirection Settings
Terminal Type	VT100VT100+VT-UTF8ANSI	Emulation: ANSI: Extended ASCII char set. VT100: ASCII char set. VT100+: Extends VT100 to support color, function keys, etc. VT-UTF8: Uses UTF8 encoding to map Unicode chars onto 1 or more bytes.
Bits per second	9600192003840057600115200	Selects serial port transmission speed. The speed must be matched on the other side. Long or noisy lines may require lower speeds.
Data Bits	78	Data Bits.
Parity	NoneEvenOddMarkSpace	A parity bit can be sent with the data bits to detect some transmission errors.
Stop Bits	12	Stop bits indicate the end of a serial data packet.
Flow Control	NoneHardware RTS/CTS	Flow control can prevent data loss from buffer overflow.
VT-UTF8 Combo Key Support	DisabledEnabled	Enable VT-UTF8 Combination Key Support for ANSI/VT100 terminals.
Recorder Mode	DisabledEnabled	With the mode enabled only text will be sent. This is to capture Terminal data.
Resolution 100x31	DisabledEnabled	Enables or disables extended terminal resolution.
Putty KeyPad	VT100LINUXXTERMR6SCOESCNVT400	Select FunctionKey and KeyPad on Putty.

# 7.3.8 Intel TXT Information

Feature	Options	Description
Intel TXT information
Chipset	Info only
BiosAcm	Info only
CPU Txt	Info only
Error Code	Info only
Class Code	Info only
Major Code	Info only
Minor Code	Info only

# 7.3.9 USB Configuration

Feature	Options	Description
USB Configuration
USB Module Version	Info only
USB Controllers	Info only
USB Devices	Info only
Legacy USB Support	DisabledEnabledAuto	Enable/Disable Legacy USB support. AUTO option disables legacy support if no USB devices are connected. DISABLE option will keep SUB devices available only for EFI applications.
XHCI Hand-Off	DisabledEnabled	This is a workaround for OSes without XHCI hand-off support. The XHCI ownership change should be claimed by XHCI driver.
USB Mass Storage Driver Support	DisabledEnabled	Enable/Disable USB Mass Storage Driver Support.

7.3.10 CSM Configuration

Feature	Options	Description
Compatibility Support Module Configuration
CSM Support	DisabledEnabled	Enable/Disable CSM Support.
CSM16 Module Version	Info only
Option ROM execution
Network	Do not launchUEFILegacy	Controls the execution of UEFI and Legacy PXE OpROM.
Storage	Do not launchUEFILegacy	Controls the execution of UEFI and Legacy Storage OpROM.
Video	Do not launchUEFILegacy	Controls the execution of UEFI and Legacy Video OpROM.
Other PCI device	Do not launchUEFILegacy	Controls the execution of UEFI and Legacy other device OpROM.

7.3.11 Network Stack Configuration

Feature	Options	Description
Network Stack	DisabledEnabled	Enable/Disable UEFI Network Stack.
Ipv4 PXE Support	DisabledEnabled	Enable/Disable IPv4 PXE boot support. If disabled, IPv4 PXE boot support will not be available.
Ipv6 PXE Support	DisabledEnabled	Enable/Disable IPv6 PXE boot support. If disabled, IPv4 PXE boot support will not be available.
PXE boot wait time	0	Wait time in seconds to press ESC key to abort the PXE boot. Use either +/- or numeric keys to set the values.
Media detect count	1	Number of times the presence of media will be checked. Use either +/- or numeric keys to set the values.

# 7.4 Chipset

Feature	Options	Description
System Agent (SA) Configuration		System Agent(SA) Parameters.
PCH-IO Configuration		PCH Parameters.

# 7.4.1 System Agent (SA) Configuration

Feature	Options	Description
System Agent (SA) Configuration
SA PCIe Code Version	Info only
VT-d	Info only
Memory Configuration		Memory Configuration Parameters.
Graphics Configuration		Graphics Configuration.
PEG Port Configuration		PEG Port Options.
VT-d	Disabled Enabled	VT-d capability

# 7.4.1.1 Memory Configuration

Feature	Options	Description
Memory Configuration
Memory RC Version	Info only
Memory Frequency	Info only
Memory Timings (tCL-tRCD-tRP-tRAS)	Info only
DIMM_A1	Info only
DIMM_B1	Info only
Max TOLUD	Dynamic1GB1.25GB1.5GB1.75GB2GB2.25GB2.5GB2.75GB3GB3.25GB3GB	Maximum Value of TOLUD. Dynamic assignment would adjust TOLUD automatically based on largest MMIO length of installed graphic controller.

7.4.1.2 Graphic Configuration

Feature	Options	Description
Graphic Configuration
Primary Display	AutoIGFXPEGPCIE	Select which of IGFX/PEG/PCIE Graphics device should be Primary Display.
Internal Graphics	AutoDisabledEnabled	Keep IGFX enabled based on the setup options.
PSMI Support	DisabledEnabled	PSMI Enable/Disable.
DVMT Pre-Allocated	0M32M64M4M8M12M16M20M24M28M32M/F736M40M44M48M52M56M	Select DVMT5.0 Pre-Allocated (Fixed) Total Graphic Memory size used by the Internal Graphics Device.
DVMT Total Gfx Mem	128M256MMAX	Select DVMT5.0 Total Graphic Memory size used by the Internal Graphics Device.
LCD Control		LCD Control.

LCD Control

Feature	Options	Description
LCD Control
LVDS Control	EnabledDisabled	Enable/Disable LVDS.
LVDS Panel Type	640x480@60Hz 18bits Single800x480@60Hz 18bits Single800x600@60Hz 18bits Single1024x768@60Hz 18bits Single1280x1024@60Hz 24bits Dual1366x768@60Hz 18bits Single1440x900@60Hz 24bits Dual1680x1050@60Hz 24bits Dual1920x1080@60Hz 24bits Dual1920x1200@60Hz 24bits Dual	Select LCD Panel Type.
LVDS Brightness Control	255	Adjust Brightness of LVDS (from 1~225).
LVDS Back Light PWM Frequency	200 Hz250 Hz333 Hz500 Hz1K Hz11.6K Hz15.6K Hz23.3K Hz	Adjust LVDS Back Light PWM Frequency.

7.4.1.3 PEG Port Configuration

Feature	Options	Description
PEG Port Configuration
PEG 0:1:0	Not Present
Enable Root Port	DisabledEnabledAuto	Enable or Disable the Root Port.
Max Link Speed	AutoGen1Gen2Gen3	Configure PEG 0:1:0 Max Speed.
PEG0 Hotplug	DisabledEnabled	Enable or Disable PCI Express hot plugging.
Extra Bus Reserved	0	Extra bus reserved (0-7) for bridges behind this Root Bridge
Reserved Memory	10	Reserved Memory for this Root Bridge.
Reserved I/O	4	Reserved I/O (4K/8K/12K/16K/20K) Range for this Root Bridge
Detect Non-Compliance Device	DisabledEnabled	Detect Non-Compliance PCI Express Device in PEG.

7.4.2 PCH IO Configuration

Feature	Options	Description
PCH-IO Configuration
PCI Express Configuration		PCI Express Configuration settings.
SATA And RST Configuration		SATA Device Options Setting.
USB Configuration		USB Configuration settings.
HD Audio Configuration		HD Audio Subsystem Configuration Settings.
LAN1 Controller	DisabledEnabled	Control the PCI Express Root Port.
LAN1 PXE OpROM	EnabledDisabled	Enable or disable boot option for LAN1 Controller.
LAN2 Controller	DisabledEnabled	Control the PCI Express Root Port.
LAN O PXE OpROM	EnabledDisabled	Enable or disable boot option for LAN2 Controller.
Restore AC Power Loss	Power OnPower OffLast State	Specify what state to go to when power is re-applied after a power failure (G3 state).
GPIO Group Control	EnabledDisabled	Configure the digital GPIO pins.
GPIO 1 Control	InputOutput HighOutput Low	Configure Digital I/O Pin.
GPIO 2 Control	InputOutput HighOutput Low	Configure Digital I/O Pin.
GPIO 3 Control	InputOutput HighOutput Low	Configure Digital I/O Pin.
GPIO 4 Control	InputOutput HighOutput Low	Configure Digital I/O Pin.
GPIO 5 Control	InputOutput HighOutput Low	Configure Digital I/O Pin.
GPIO 6 Control	InputOutput HighOutput Low	Configure Digital I/O Pin.
GPIO 7 Control	InputOutput HighOutput Low	Configure Digital I/O Pin.
GPIO 8 Control	InputOutput HighOutput Low	Configure Digital I/O Pin.

7.4.2.1 PCI Express Configuration

Feature	Options	Description
PCI Express Configuration
PCIE Device Initial Delay	0	The PCIE device initial delay mini second.
PCI Express Root Port 5 (Mini-PCIe)
PCI Express Root Port 5 (Mini-PCIe)	DisabledEnabled	Control the PCI Express Root Port.
ASPM 5	DisabledL0sL1L0sL1Auto	Set the ASPM Level:Force L0s – Force all links to L0s StateAuto – BIOS auto configureDisable – Disables ASPM
PCIe Speed	AutoGen1Gen2Gen3	Configure PCIe Speed.
PCI Express Root Port 11 (LAN1)
PCI Express Root Port 12 (LAN2)

7.4.2.2 SATA And RST Configuration

Feature	Options	Description
SATA Configuration
SATA Controller(s)	EnabledDisabled	Enable/Disable SATA Device.
SATA Mode Selection	AHCIIntel RST Premium	Determines how SATA controllers operate.
Serial ATA Port 1	Info only
Software Preserve	Info only
Port 1	DisabledEnabled	Enable or Disable SATA Port.
Serial ATA Port 2	Info only
Software Preserve	Info only
Port 2	DisabledEnabled	Enable or Disable SATA Port.
Serial ATA Port 3	Info only
Software Preserve	Info only
Port 3	DisabledEnabled	Enable or Disable SATA Port.
Serial ATA Port 4	Info only
Software Preserve	Info only
Port 4	DisabledEnabled	Enable or Disable SATA Port.
Serial ATA Port 5	Info only
Software Preserve	Info only
Port 5	DisabledEnabled	Enable or Disable SATA Port.

7.4.2.3 USB Configuration

Feature	Options	Description
USB Configuration
XHCI Compliance Mode	DisabledEnabled	Options to disable Compliance Mode. Default is to disable Compliance Mode. Change to enabled for Compliance Mode testing.
USB12 Standby Power	DisabledEnabled	Enable/Disable USB Standby Power.
USB34 Standby Power	DisabledEnabled	Enable/Disable USB Standby Power.
USB78 Standby Power	DisabledEnabled	Enable/Disable USB Standby Power.

7.4.2.4 HD Audio Configuration

Feature	Options	Description
HD Audio Configuration
HD Audio	Disable Enable	Control Detection of the HD-Audio device. Disabled = HAD will be unconditionally disabled. Enabled = HAD will be unconditionally enabled.

# 7.5 Security

Feature	Options	Description
Administrator Password		Set Administrator Password.
User Password		Set User Password.
Secure Boot		Secure Boot configuration.

# 7.5.1 Secure Boot

Feature	Options	Description
System Mode	Setup
Secure Boot	DisableEnable	Secure Boot Feature is Active if Secure Boot is Enabled, Platform Key (PK) is enrolled and the System is in User mode. The mode change requires platform reset.
Secure Boot Mode	StandardCustom	Secure Boot mode options: Standard or Custom. In Custom mode, Secure Boot Policy variables can be configured by a physically present user without full authentication.
Restore Factory Keys	YesNo	Force System to User Mode. Install factory default Secure Boot key databases.
Reset to Setup Mode	YesNo	Delete all Secure key databases from NVRAM.
Key Management		Enables expert users to modify Secure Boot Policy variables without full authentication.

7.5.1.1 Key Management

Feature	Options	Description
Vendor Keys	Modified
Factory Key Provision	DisableEnable	Install factory default Secure Boot keys after the platform reset and while the System is in Setup mode.
Restore Factory Keys	YesNo	Force System to User Mode. Install factory default Secure Boot key databases
Reset to Setup Mode	YesNo	Delete all Secure key databases from NVRAM.
Export Secure Boot variables	Ok	Copy NVRAM content of Secure Boot variables to files in a root folder on a file system device.
Enroll Efi Image	Ok	Allow the image to run in Secure Boot mode.Enroll SHA256 Hash certificate of a PE image into Authorized Signature Database (db).
Device Guard Ready
Remove “UEFI CA” from DB	YesNo	Device Guard ready system must not list‘Microsoft UEFI CA’ Certificate in Authorized Signature database (db).
Restore DB defaults	YesNo	Restore DB variable to factory defaults.
Secure Boot variable	Size \| Keys \| Key Source
Platform Key (PA)	0 \| 0 \| No Keys	Enroll Factory Defaults or load certificates from a file:1. Public key Certificate:a) EFI_SIGNATURE_LISTb) EFI_CERT_X509 (DER)c) EFI_CERT_RSA2048 (bin)d) EFI_CERT_SHAXXX2. Authenticated UEFI Variables3. EFI PE/COFF Image (SHA256)Key Source: Factory, External, Mixed
Key Exchange Keys	0 \| 0 \| No Keys
Authorized Signatures	0 \| 0 \| No Keys
Forbidden Signatures	0 \| 0 \| No Keys
Authorized TimeStamps	0 \| 0 \| No Keys
OsRecovery Signatures	0 \| 0 \| No Keys

7.6 Boot

Feature	Options	Description
Boot Configuration
Setup Prompt Timeout	1	Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting.
Bootup NumLock State	OnOff	Select the keyboard NumLock state.
Quiet Boot	DisabledEnabled	Enable or disables Quiet Boot option.
Support Native Resolution	DisabledEnabled	Enable or disable Support Native Resolution.
Driver Option Priorities
Boot Mode	LEGACYUEFI	Automatically set CSM's item so LEGACY or UEFI.
FIXED BOOT ORDER Priorities
Boot Option #1	Hard Disk	Set the system boot order.
Boot Option #2	CD/DVD	Set the system boot order.
Boot Option #3	USB Hard Disk	Set the system boot order.
Boot Option #4	USB CD/DVD	Set the system boot order.
Boot Option #5	USB Key	Set the system boot order.
Boot Option #6	USB Floppy	Set the system boot order.
Boot Option #7	Network	Set the system boot order.

7.7 Save & Exit

Feature	Options	Description
Save Options
Save Changes and Exit	YesNo	Exit system setup after saving the changes.
Discard Changes and Exit	YesNo	Exit system setup without saving any changes.
Save Changes and Reset	YesNo	Reset the system after saving the changes.
Default Options
Restore Defaults	YesNo	Restore/Load Default values for all the setup options.
Boot Override
Launch EFI Shell from filesystem device		Attempts to Launch EFI Shell application (Shell.efi) from one of the available filesystem devices.

# Safety Instructions Read and follow all instructions marked on the product and in the documentation before you operate your system. Retain all safety and operating instructions for future use. - Please read these safety instructions carefully. - Please keep this User's Manual for later reference. - Read the specifications section of this manual for detailed information on the operating environment of this equipment. - When installing/mounting or uninstalling/removing equipment, turn off the power and unplug any power cords/cables. - To avoid electrical shock and/or damage to equipment: - Keep equipment away from water or liquid sources. - Keep equipment away from high heat or high humidity. - Keep equipment properly ventilated (do not block or cover ventilation openings). - Make sure to use recommended voltage and power source settings. ▪ Always install and operate equipment near an easily accessible electrical socket-outlet. - Secure the power cord (do not place any object on/over the power cord). - Only install/attach and operate equipment on stable surfaces and/or recommended mountings. ☐ If the equipment will not be used for long periods of time, turn off and unplug the equipment from its power source. \- Never attempt to fix the equipment. Equipment should only be serviced by qualified personnel. # Getting Service Ask an Expert: http://askanexpert.adlinktech.com # ADLINK Technology, Inc.

Address:	9F, No.166 Jian Yi Road, Zhonghe District New Taipei City 235, Taiwan
Tel:	+886-2-8226-5877
Fax:	+886-2-8226-5717
Email:	service@adlinktech.com

# Ampro ADLINK Technology, Inc. Address: 5215 Hellyer Avenue, #110, San Jose, CA 95138, USA Tel: +1-408-360-0200 Toll Free: +1-800-966-5200 (USA only) Fax: +1-408-360-0222 Email: info@adlinktech.com # ADLINK Technology (China) Co., Ltd.

Address:	300 Fang Chun Rd., Zhangjiang Hi-Tech Park, Pudong New Area Shanghai, 201203 China
Tel:	+86-21-5132-8988
Fax:	+86-21-5132-3588
Email:	market@adlinktech.com

# ADLINK Technology GmbH Address: Hans-Thoma-Strasse 11, D-68163, Mannheim, Germany Tel: +49-621-43214-0 Fax: +49-621 43214-30 Email: emea@adlinktech.com Please visit the Contact page at www.adlinktech.com for information on how to contact the ADLINK regional office nearest you. [🔗 Link to the original document](.amitx-cf-i-50-1x017-1000-10/amitx-cf-i-50-1x017-1000-10.pdf)