# AmITX-RL-WV

# User’s Manual

Mini-ITX Embedded Motherboard with

12th/13th/14th Gen Intel® Core™ i9/i7/i5/i3 Processors

and Intel® H610 Chipset

![Close-up of a green printed circuit board with various electronic components and connectors (no readable text or symbols)](.amitx-rl-wv-50m-16008-2010-11/53f1fbd01669de9c04ffda32d811b99b3d00d056c5bc7b420eacd2b9b6f86f25.jpg)

Manual Rev.: Rev. 1.1

Revision Date: May 15, 2025

Part Number: 50M-16008-2010

# Preface

# Copyright

Copyright © 2025 ADLINK Technology, Inc. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

# Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

# Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.

![Symbol of a trash bin crossed with a diagonal line and a horizontal bar below (no text or labels)](.amitx-rl-wv-50m-16008-2010-11/9996c8c56274371bc128318beb891f04a3a55df59ef39c7e299da173387daf4e.jpg)

Battery Labels (for products with battery)

![Simple line drawing of a trash bin with crossed lines indicating no waste or prohibition (no text or symbols)](.amitx-rl-wv-50m-16008-2010-11/e8d51406663c6242f354b0ea3f180dfe845abfb23bc69b963605a09e530fd5e9.jpg)

![Li-ion](.amitx-rl-wv-50m-16008-2010-11/fd958527bb97ca80e2e318ad2618439d7c73ebf6f804b105ce8216c0a6455876.jpg)

![RECYCLE\nRBRC\nLi-ion\n7.800.822.8837](.amitx-rl-wv-50m-16008-2010-11/7da5f3d5de557e7a5215e12b09fbcb18cc73b63dc287fd04cf904f5d4cb6b517.jpg)

![廢電池請回收](.amitx-rl-wv-50m-16008-2010-11/f1251ed9b47a638a34617afa71905b554ce757f82377eea4fd47493017e96b1b.jpg)

# California Proposition 65 Warning

![The image displays a yellow triangular warning sign with a thick black border. Centered inside the triangle is a black exclamation point.](.amitx-rl-wv-50m-16008-2010-11/ab9022f24b445cab39d9d09337ba05c67e6cf49b491ee80ab6c74fd50402df26.jpg)

WARNING: This product can expose you to chemicals including acrylamide, arsenic, benzene, cadmium, Tris(1,3-dichloro-2-propyl)phosphate (TDCPP), 1,4-Dioxane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and vinyl materials, which are known to the State of California to cause cancer, and acrylamide, benzene, cadmium, lead, mercury, phthalates, toluene, DEHP, DIDP, DnHP,

DBP, BBP, PVC, and vinyl materials, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

# Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

Revision History

<table><tr><td>Revision</td><td>Description</td><td>Date</td><td>By</td></tr><tr><td>1.0</td><td>Initial release</td><td>2025-02-18</td><td>AL</td></tr><tr><td>1.1</td><td>Mechanical layout and connectors and jumpers updated</td><td>2025-05-15</td><td>AL</td></tr></table>

# Table of Contents

# Preface...

# List of Figures .............. ..iv

# 1 Introduction...

1.1 Packing List..
1.2 Optional Accessories..

# 2 Specifications ...

2.1 Core System . .3
2.2 Rear I/O Connectors .. .4
2.3 Internal Headers and Connectors. .5
2.4 Form Factor... .5
2.5 Video.. .6
2.6 Audio.. .6
2.7 LAN. .6
2.8 Trusted Platform Module (TPM) . .6
2.9 Power Specification.. ..6
2.10 Watchdog Timer.
2.11 Temperatures..
2.12 Environmental .
2.13 Operating Systems..
2.14 Functional Block Diagram.. .8

# 3 Mechanical Layout ...............

3.1 Connector Locations .. .9
3.2 Thermal Solutions . ..12

# 4 Connectors and Jumpers ....... ..13

4.1 Rear IO Connectors . ..13
4.2 Internal Connectors.. ..15
4.3 Jumper and Switch Settings . ..26

# 5 Driver Installation .............. .31

# 6 BIOS Settings..... .33

6.1 Menu Structure.. ..33
6.2 Main . ..34
6.3 Advanced . ..34
6.4 HW Monitor .. ..39
6.5 Security .. ..39
6.6 Boot . ..40
6.7 Exit .. ..41

# Safety Instructions.... .42

# Getting Services... .43

# List of Figures

Figure 1: AmITX-RL-WV functional block diagram .. .8
Figure 2: AmITX-RL-WV rear I/O.. .9
Figure 3: AmITX-RL-WV component-side connectors. ..10

# 1 Introduction

The AmITX-RL-WV is a Mini-ITX motherboard supporting the Desktop 12th/13th/14th Generation Intel® Core™ i9/i7/i5/i3 and Pentium®/Celeron® Processor with Intel® H610 Chipset. The AmITX-RL-WV is specifically designed for customers who need high-level processing and graphics performance with a long product life solution.

The AmITX-RL-WV features two DisplayPort, one HDMI, one LVDS, one eDP, two 2.5 Gigabit Ethernet ports, USB 3.2 Gen 2 and Gen 1 ports, USB 2.0 ports, and SATA 6 Gb/s ports. Expansion is provided by one PCIe Gen 4 x16 slot. The onboard feature connector provides GPIO, SMBus support. The board is equipped with SPI AMI EFI BIOS, supporting embedded features such as hardware monitor and watchdog timer

<table><tr><td>Model Number</td><td>Chipset</td></tr><tr><td>AmITX-RL-WV</td><td>H610</td></tr></table>

Latest revisions of the datasheet, user’s manual, BIOS, drivers, and board support packages, can be downloaded from the product webpage on the ADLINK web site: www.adlinktech.com

# 1.1 Packing List

• AmITX-RL-WV Mini-ITX motherboard
Rear I/O shield
M.2 screws kit

# 1.2 Optional Accessories

• CPU 1U Cooler for 65W CPU (P/N: 32-21100-0000-A0)
• USB 2.0 Cable - 2 Ports (P/N: 30-21625-0000-B0)
USB 3.0 Cable - 2 Ports (P/N: 30-21597-1000-A0)
• SATA Cable (P/N: 30-10057-7000)
• SATA Power Cable (P/N: 30-22156-0000-A0)
• COM Port Cable - 1 Port (P/N: 30-22155-0000-A0)

This page intentionally left blank.

# 2 Specifications

2.1 Core System

<table><tr><td rowspan="30">CPU</td><td colspan="6">Desktop 12th/13th/14th Generation Intel® CoreTM i9/i7/i5/i3 and Pentium®/Celeron® Processor, LGA1700 socket</td></tr><tr><td>Family</td><td>Number</td><td>CPU Core</td><td>Frequency (GHz)</td><td>Cache (MB)</td><td>Power</td></tr><tr><td>Alder Lake-S</td><td>i9-12900TE</td><td>16</td><td>1.1GHz</td><td>30MB</td><td>65W</td></tr><tr><td>Alder Lake-S</td><td>i9-12900E</td><td>16</td><td>2.3GHz</td><td>30MB</td><td>65W</td></tr><tr><td>Alder Lake-S</td><td>i7-12700TE</td><td>12</td><td>1.4GHz</td><td>25MB</td><td>35W</td></tr><tr><td>Alder Lake-S</td><td>i7-12700E</td><td>12</td><td>2.1GHz</td><td>25MB</td><td>65W</td></tr><tr><td>Alder Lake-S</td><td>i5-12600T</td><td>6</td><td>2.1GHz</td><td>18MB</td><td>35W</td></tr><tr><td>Alder Lake-S</td><td>i5-12600</td><td>6</td><td>3.3GHz</td><td>18MB</td><td>65W</td></tr><tr><td>Alder Lake-S</td><td>i5-12500TE</td><td>6</td><td>1.9GHz</td><td>18MB</td><td>35W</td></tr><tr><td>Alder Lake-S</td><td>i5-12500E</td><td>6</td><td>2.9GHz</td><td>18MB</td><td>65W</td></tr><tr><td>Alder Lake-S</td><td>i5-12400T</td><td>6</td><td>1.8GHz</td><td>18MB</td><td>35W</td></tr><tr><td>Alder Lake-S</td><td>i5-12400</td><td>6</td><td>2.5GHz</td><td>18MB</td><td>65W</td></tr><tr><td>Alder Lake-S</td><td>i3-12300T</td><td>4</td><td>2.3GHz</td><td>12MB</td><td>35W</td></tr><tr><td>Alder Lake-S</td><td>i3-12300</td><td>4</td><td>3.5GHz</td><td>12MB</td><td>60W</td></tr><tr><td>Alder Lake-S</td><td>i3-12100TE</td><td>4</td><td>2.1GHz</td><td>12MB</td><td>35W</td></tr><tr><td>Alder Lake-S</td><td>i3-12100E</td><td>4</td><td>3.2GHz</td><td>12MB</td><td>60W</td></tr><tr><td>Alder Lake-S</td><td>G7400TE</td><td>2</td><td>3.0GHz</td><td>6MB</td><td>35W</td></tr><tr><td>Alder Lake-S</td><td>G7400E</td><td>2</td><td>3.6GHz</td><td>6MB</td><td>46W</td></tr><tr><td>Alder Lake-S</td><td>G6900TE</td><td>2</td><td>2.4GHz</td><td>4MB</td><td>35W</td></tr><tr><td>Alder Lake-S</td><td>G6900E</td><td>2</td><td>3.0GHz</td><td>4MB</td><td>46W</td></tr><tr><td>Raptor Lake-S</td><td>i9-13900TE</td><td>24</td><td>1.0GHz</td><td>36MB</td><td>35W</td></tr><tr><td>Raptor Lake-S</td><td>i9-13900E</td><td>24</td><td>1.8GHz</td><td>36MB</td><td>65W</td></tr><tr><td>Raptor Lake-S</td><td>i7-13700TE</td><td>16</td><td>1.1GHz</td><td>30MB</td><td>35W</td></tr><tr><td>Raptor Lake-S</td><td>i7-13700E</td><td>16</td><td>1.9GHz</td><td>30MB</td><td>65W</td></tr><tr><td>Raptor Lake-S</td><td>i5-13600T</td><td>14</td><td>1.8GHz</td><td>24MB</td><td>35W</td></tr><tr><td>Raptor Lake-S</td><td>i5-13600</td><td>14</td><td>2.7GHz</td><td>24MB</td><td>65W</td></tr><tr><td>Raptor Lake-S</td><td>i5-13500TE</td><td>14</td><td>1.3GHz</td><td>24MB</td><td>35W</td></tr><tr><td>Raptor Lake-S</td><td>i5-13500E</td><td>14</td><td>2.4GHz</td><td>24MB</td><td>65W</td></tr><tr><td>Raptor Lake-S</td><td>i5-13400T</td><td>10</td><td>1.3GHz</td><td>20MB</td><td>30W</td></tr><tr><td>Raptor Lake-S</td><td>i5-13400E</td><td>10</td><td>2.4GHz</td><td>20MB</td><td>65W</td></tr><tr><td rowspan="15"></td><td>Raptor Lake-S</td><td>i3-13100TE</td><td>4</td><td>2.4GHz</td><td>12MB</td><td>35W</td></tr><tr><td>Raptor Lake-S</td><td>i3-13100E</td><td>4</td><td>3.3GHz</td><td>12MB</td><td>65W</td></tr><tr><td>Raptor Lake-S Refresh</td><td>i9-14900T</td><td>24</td><td>1.1GHz</td><td>36MB</td><td>35W</td></tr><tr><td>Raptor Lake-S Refresh</td><td>i9-14900</td><td>24</td><td>2.0GHz</td><td>36MB</td><td>65W</td></tr><tr><td>Raptor Lake-S Refresh</td><td>i7-14700T</td><td>20</td><td>1.3GHz</td><td>33MB</td><td>35W</td></tr><tr><td>Raptor Lake-S Refresh</td><td>i7-14700</td><td>20</td><td>2.1GHz</td><td>33MB</td><td>65W</td></tr><tr><td>Raptor Lake-S Refresh</td><td>i5-14500T</td><td>14</td><td>1.7GHz</td><td>24MB</td><td>35W</td></tr><tr><td>Raptor Lake-S Refresh</td><td>i5-14500</td><td>14</td><td>2.6GHz</td><td>24MB</td><td>65W</td></tr><tr><td>Raptor Lake-S Refresh</td><td>i5-14400T</td><td>10</td><td>1.5GHz</td><td>20MB</td><td>35W</td></tr><tr><td>Raptor Lake-S Refresh</td><td>i5-14400</td><td>10</td><td>2.5GHz</td><td>20MB</td><td>65W</td></tr><tr><td>Raptor Lake-S Refresh</td><td>i3-14100T</td><td>4</td><td>2.7Ghz</td><td>12MB</td><td>35W</td></tr><tr><td>Raptor Lake-S Refresh</td><td>i3-14100</td><td>4</td><td>3.5GHz</td><td>12MB</td><td>60W</td></tr><tr><td>Raptor Lake-S Refresh</td><td>300T</td><td>2</td><td>3.4GHz</td><td>6MB</td><td>35W</td></tr><tr><td>Raptor Lake-S Refresh</td><td>300</td><td>2</td><td>3.9GHz</td><td>6MB</td><td>46W</td></tr><tr><td colspan="6">Note: Availability of features may vary between processor SKUs and operating systems.</td></tr><tr><td>Chipset</td><td colspan="6">Intel® H610 Chipset</td></tr><tr><td>Memory</td><td colspan="6">Two 260-pin DDR4 non-ECC SODIMM slots, DDR4 3200 MHz, up to 64 GB</td></tr><tr><td>Embedded BIOS</td><td colspan="6">AMI® UEFI BIOS, 256Mb SPI flash memory</td></tr></table>

2.2 Rear I/O Connectors

<table><tr><td>Display</td><td>1x HDMI 2.0b, 2x DP 1.4a</td></tr><tr><td>LAN</td><td>2x 2.5GbE RJ-45</td></tr><tr><td>USB</td><td>2x USB3.2 Gen2 x12 x USB 2.0</td></tr><tr><td>Audio</td><td>1x Line-out, 1x Mic-in connector</td></tr><tr><td>Power</td><td>12V to 28V DC-In DC Jack (Screw Type)</td></tr></table>

2.3 Internal Headers and Connectors

<table><tr><td>PCI Express Slots</td><td>1x PCIe Gen4 x16</td></tr><tr><td>USB</td><td>1x USB3.2 Gen1 x1 (via header)3x USB2.0 (via header)</td></tr><tr><td>SATA</td><td>2x SATA 6.0 Gb/s connectors.</td></tr><tr><td>Expansion Slots</td><td>1x M.2 B-key 3042/3052 (PCIe x1, USB3.2 Gen1, USB 2.0) for 4G/5G module1x M.2 E-key 2230 (PCIe x1, USB 2.0, CNVi) for Wireless1x M.2 M-Key 2242/2260/2280 (PCIe Gen3 x4) for SSD1x SIM socket connected to M.2 B Key</td></tr><tr><td>Serial</td><td>2x RS-232/422/485 headers2x RS-232 headers</td></tr><tr><td>PCI Express Slots</td><td>1x eDP 1.4b, supports max. resolution up to 4096x2160@60Hz</td></tr><tr><td>LVDS</td><td>1x LVDS, supports dual channel 24-bit up to 1920x1200@60Hz</td></tr><tr><td>DIO</td><td>1x 8-bit GPIO pin header</td></tr><tr><td>Others</td><td>ESPI HeaderCPU Fan ConnectorChassis Fan ConnectorSystem Panel HeaderFront Panel Audio HeaderChassis Intrusion HeaderSPDIF HeaderSpeaker HeaderSATA PWR OutputATX Power Connector (4-pin)</td></tr></table>

# 2.4 Form Factor

Mini-ITX: 170mm x 170mm

# 2.5 Video

<table><tr><td>Controller</td><td>Intel® UHD Graphics</td></tr><tr><td>Display Interface Support</td><td>1x HDMI 2.0b, max resolution up to 4096x2160@60Hz2x DP 1.4a, DP++, max resolution up to 4096x2160@60Hz1x eDP 1.4b, max. resolution up to 4096x2160@60Hz1x LVDS, supports dual channel 24-bit, max resolution up to 1920x1200@60Hz</td></tr></table>

# 2.6 Audio

<table><tr><td>Audio Codec</td><td>Realtek ALC897</td></tr><tr><td>Interfaces</td><td>1x Line-out, 1x Mic-in connector</td></tr></table>

# 2.7 LAN

<table><tr><td>Controller</td><td>1x Intel® i225-V with 10/100/1000/2500 Mbps1x Intel® i225-V with 10/100/1000/2500 Mbps</td></tr><tr><td>Interface</td><td>RJ45 connectors</td></tr></table>

# 2.8 Trusted Platform Module (TPM)

<table><tr><td>TPM 2.0</td><td>Infineon SLB9670XQ2.0</td></tr></table>

# 2.9 Power Specification

<table><tr><td>Input PWR</td><td>12V to 28V DC-In with DC Jack (screw type) or ATX PWR (4-pin)</td></tr><tr><td>Power On</td><td>AT/ATX Supported- AT: Directly PWR on as power input ready- ATX: Press button to PWR on after power input ready</td></tr></table>

# 2.10 Watchdog Timer

<table><tr><td>Output</td><td>From Super I/O to drag RESETCON#</td></tr><tr><td>Interval</td><td>256 Segments, 0, 1, 2, ...255 Sec</td></tr></table>

# 2.11 Temperatures

<table><tr><td>Standard Operating Temperature</td><td>0°C to 60°C</td></tr><tr><td>Storage Temperature</td><td>-40°C to 85°C</td></tr></table>

# 2.12 Environmental

<table><tr><td>Humidity</td><td>60°C @ 95% RH non-condensing</td></tr><tr><td>Vibration</td><td>1Grms, 5-500Hz, non-operation</td></tr></table>

# 2.13 Operating Systems

<table><tr><td>Standard Support</td><td>Microsoft® Windows® 10/11 64-bit, Ubuntu 22.04.4 LTS 64-bit</td></tr></table>

# 2.14 Functional Block Diagram

![The flowchart depicts a system architecture centered around an Intel Processor and a PCH (Platform Controller Hub).\n\n**Top Block (Processor)**\n*   **Block:** 'Intel® Alder Lake-S & Raptor Lake-S Raptor Lake-S refresh Processor LGA -1700'\n*   **Connections (Left):**\n    *   'eDP' connects via 'DDI'.\n    *   'Display port Connector' connects via 'DDI'.\n    *   'Display port Connector' connects via 'DDI'.\n    *   'HDMI' connects via 'DDI'.\n    *   'LVDS Connector' connects via 'LVDS' to block 'CH7513A', which connects via 'DDI' to the Processor.\n*   **Connections (Right):**\n    *   'Channel A DDR4 3200MHz' connects to 'SO-DIMM (AI)'.\n    *   'Channel B DDR4 3200MHz' connects to 'SO-DIMM (BI)'.\n    *   'PCIe x16 Gen4' connects to 'PCIe x16'.\n*   **Connections (Bottom):**\n    *   'DMI' connects to 'Intel® PCH H610'.\n\n**Middle Block (PCH)**\n*   **Block:** 'Intel® PCH H610'\n*   **Connections (Left):**\n    *   Two instances of 'Intel® I225V' connect via 'MDI 2.5G' to 'RJ45' and via 'PCIe x1' to the PCH.\n    *   '2x USB3.2 Gen2 Connector' connects via '2 x USB3.2 Gen2'.\n    *   '2x USB2.0 Connector' connects via '2 x USB2.0'.\n    *   '1xUSB3.2 Gen1+1xUSB2.0 Internal Header' connects via '1 x USB3.2 Gen1' and '1 x USB2.0'.\n    *   '2x USB2.0 Internal Header' connects via '2 x USB2.0'.\n    *   'INFINEON SLB9670XQ2.0' connects via 'SPI'.\n    *   'BIOS SPI FLASH 3.3V/256Mb' connects via 'SPI'.\n    *   Block 'Realtek ALC897' connects via 'HDA'. This block connects to:\n        *   'Line Out / Mic In'\n        *   'SPDIF'\n        *   'Front Audio'\n        *   'AMP ALC122'\n*   **Connections (Right):**\n    *   'SATA x2' connects to '2x SATA3 Connector'.\n    *   'PCIe x4' connects to 'M.2_KeyM 3042/3060/2280'.\n    *   'PCIe x1' and 'USB2.0' connect to 'M.2 Key E'.\n    *   'PCIe x1', 'USB3.2 Gen1', and 'USB2.0' connect to 'M.2 Key B (3042/3052)'. This connects via 'SIM' to 'SIM Card'.\n    *   '4x GPO (Interrupt support)' and '4x GPI' connect to 'D-GPIO 4-in/4-out'.\n*   **Connections (Bottom Right/Management):**\n    *   'eSPI' connects to 'FINTEK F81966'.\n    *   'FINTEK F81966' connects via 'FAN' to '1 x CPU FAN 1 x SYS FAN'.\n    *   'FINTEK F81966' connects via 'UARTx2' to 'SP339'.\n    *   'FINTEK F81966' connects via 'UARTx2' to 'TRS3243'.\n    *   'SP339' connects via 'COM' to 'Internal Header 2x RS232/422/485'.\n    *   'TRS3243' connects via 'COM' to 'Internal Header 2x RS232'.](.amitx-rl-wv-50m-16008-2010-11/49de6f6939c8711808188816981a302c9eec7f7d53b7ba9d73c9111a7abe8c4b.jpg)

Figure 1: AmITX-RL-WV functional block diagram

# 3 Mechanical Layout

# 3.1 Connector Locations

# 3.1.1 Rear I/O Connectors

![A-1\nB-1\nC-1\nC-2\nE-1\nE-2\nG\nA-2\nB-2\nD\nF-1\nF-2](.amitx-rl-wv-50m-16008-2010-11/4ae64c5cf22dca5a45583b1371cf79925fcbe1071e616d7feeb5889e87208671.jpg)

Figure 2: AmITX-RL-WV rear I/O

<table><tr><td>Location</td><td>Description</td></tr><tr><td>A-1</td><td>USB 3.2 Gen2 Ports (USB3_1)</td></tr><tr><td>A-2</td><td>USB 3.2 Gen2 Ports (USB3_2)</td></tr><tr><td>B-1</td><td>USB 2.0 Ports (USB2_7)</td></tr><tr><td>B-2</td><td>USB 2.0 Ports (USB2_8)</td></tr><tr><td>C-1</td><td>DisplayPort (DP1)</td></tr><tr><td>C-2</td><td>DisplayPort (DP2)</td></tr><tr><td>D</td><td>HDMI Port (HDMI1)</td></tr><tr><td>E-1</td><td>LAN RJ-45 Port (LAN2)</td></tr><tr><td>E-2</td><td>LAN RJ-45 Port (LAN1)</td></tr><tr><td>F-1</td><td>Line out (Green)</td></tr><tr><td>F-2</td><td>Microphone (Pink)</td></tr><tr><td>G</td><td>DC Jack (DC_JACK1)</td></tr></table>

# 3.1.2 Connectors and Jumpers

![27(*Backside: SIM1)\n25-1 25-2 26 28 29-2 29-1 30 31 32 33 34 35-4 35-3 35-2 35-1 36\nAVIA\n1-1\n1-2\n2\n3(*Backside: EDP1)\n4\n5\n6\n24\n23\n22\n21\n20\n18\n17 16 14 13\n19\n15\n14\n13\nRoHS\nFC CE UK\nADLINK\nAmITX-RL-WV REV. 1.03](.amitx-rl-wv-50m-16008-2010-11/fad6584c459733ce6ecdc517365b6562ac524f5daa1e814d2c9c9cd75b01b79a.jpg)

Figure 3: AmITX-RL-WV component-side connectors

<table><tr><td>Location</td><td>Description</td><td>Location</td><td>Description</td></tr><tr><td>1-1</td><td>COM Port PWR Setting Jumpers (PWR_COM3)</td><td>21</td><td>Front Panel Audio Header</td></tr><tr><td>1-2</td><td>COM Port PWR Setting Jumpers (PWR_COM1)</td><td>22</td><td>3W Audio AMP Output Wafer</td></tr><tr><td>2</td><td>Inverter Power Control Wafer (BLT_PWR1)</td><td>23</td><td>USB2.0 Header (USB2_5_6)</td></tr><tr><td>3</td><td>LVDS Panel Connector*</td><td>24</td><td>USB3.2 Gen1 Header (USB3_4_9)</td></tr><tr><td>*</td><td>eDP Connector (EDP1) (on the Backside of PCB)</td><td>25-1</td><td>DDR4 SO-DIMM Sockets (DDR4_A1)</td></tr><tr><td>4</td><td>Backlight Volume Control (BLT_VOL1)</td><td>25-2</td><td>DDR4 SO-DIMM Sockets (DDR4_B1)</td></tr><tr><td>5</td><td>Panel Power Select (LCD_VCC) (PNL_PWR1)</td><td>26</td><td>ESPI Header (ESPI1)</td></tr><tr><td>6</td><td>Inverter Power Control Wafer (BLT_PWR2)</td><td>27</td><td>M.2 Key-B Socket (M2_B1)*</td></tr><tr><td>7</td><td>Clear CMOS Header (CLRMOS1)</td><td>*</td><td>SIM Card Socket (SIM1) (on the Backside of PCB)</td></tr><tr><td>8</td><td>Chassis Intrusion Header (CI1_2)</td><td>28</td><td>Battery Connector</td></tr><tr><td>9</td><td>PWR_BAT1_SIO_AT1</td><td>29-1</td><td>SATA3 Connectors (SATA3_1)</td></tr><tr><td>10</td><td>AT_TEST1_PCIE_PWR1</td><td>29-2</td><td>SATA3 Connectors (SATA3_2)</td></tr><tr><td>11</td><td>System Panel Header</td><td>30</td><td>SATA Power Output Connector</td></tr><tr><td>12</td><td>SMBUS_TEST1</td><td>31</td><td>DACC1</td></tr><tr><td>13</td><td>CPU FAN Connector (+12V)</td><td>32</td><td>Digital Input / Output Power Select (JGPIO_PWR1)</td></tr><tr><td>14</td><td>Chassis FAN Connector (+12V)</td><td>33</td><td>Digital Input / Output Default Value Setting (JGPIO_SET1)</td></tr><tr><td>15</td><td>Power Adapter</td><td>34</td><td>Digital Input/Output Pin Header (JGPIO1)</td></tr><tr><td>16</td><td>M.2 Key-M Socket (M2_KEYM1)</td><td>35-1</td><td>COM Port Headers (COM1)</td></tr><tr><td>17</td><td>M.2 Key-E Socket (M2_KEYE1)</td><td>35-2</td><td>COM Port Headers (COM2)</td></tr><tr><td>18</td><td>4-pin ATX PWR Connector</td><td>35-3</td><td>COM Port Headers (COM3)</td></tr><tr><td>19</td><td>2-pin UPS Module Power Input Connector</td><td>35-4</td><td>COM Port Headers (COM4)</td></tr><tr><td>20</td><td>SPDIF Header</td><td>36</td><td>Backlight Power Select (LCD_BLT_VCC) (BKT_PWR1)</td></tr></table>

# 3.2 Thermal Solutions

LGA1700 CPU Cooler, H=27.4mm, 65W

Standard Temp.: 0°C to 60°C

P/N: 32-21100-0000-A0

![178±0,5](.amitx-rl-wv-50m-16008-2010-11/efc0ea03ac8f6729c0efc15465480cd17aa941ce64522bbb42786dbf4e8d5201.jpg)

![27,3±1\n1\n2](.amitx-rl-wv-50m-16008-2010-11/ea956700d432a5da9f577209f2a10b0891aa551eda69f9c95d6151cfe94ab52f.jpg)

# 4 Connectors and Jumpers

See 3.1 Connector Locations on page 9.

# 4.1 Rear IO Connectors

# 4.1.1 DisplayPort

One DisplayPort 1.4a specification port up to 4096x2160@60Hz

<table><tr><td>Pin</td><td>Signal Name</td><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>DP1_CON_DP0</td><td>2</td><td>GND</td></tr><tr><td>3</td><td>DP1_CON_DN0</td><td>4</td><td>DP1_CON_DP1</td></tr><tr><td>5</td><td>GND</td><td>6</td><td>DP1_CON_DN1</td></tr><tr><td>7</td><td>DP1_CON_DP2</td><td>8</td><td>GND</td></tr><tr><td>9</td><td>DP1_CON_DN2</td><td>10</td><td>DP1_CON_DP3</td></tr><tr><td>11</td><td>GND</td><td>12</td><td>DP1_CON_DN3</td></tr><tr><td>13</td><td>DP1_HDMI_DNG_DET</td><td>14</td><td>DP_CFG2</td></tr><tr><td>15</td><td>DP1_CON_AUXP</td><td>16</td><td>GND</td></tr><tr><td>17</td><td>DP1_CON_AUXN</td><td>18</td><td>DP1_CON_HPD</td></tr><tr><td>19</td><td>GND</td><td>20</td><td>+3.3V</td></tr></table>

![The image displays a technical line drawing of an electronic connector housing. The housing is depicted as a vertical rectangle with rounded corners and small rectangular tabs on the sides. Inside the housing, two vertical columns of small squares represent the connector pins.\n\nThe pins are numbered with specific labels:\n- The top pin in the left column is labeled '**1**'.\n- The top pin in the right column is labeled '**2**'.\n- The bottom pin in the left column is labeled '**19**'.\n- The bottom pin in the right column is labeled '**20**'.\n\nThis arrangement indicates a 20-pin connector, likely with 10 pins in each column. A rectangular protrusion is visible at the bottom of the housing, representing the cable strain relief or connection point.](.amitx-rl-wv-50m-16008-2010-11/2d3974d6d203a866e37877b91113f918e0e4bc5d4558b17ad256422bc7871b8a.jpg)

# 4.1.2 HDMI

One HDMI 2.0b specification port up to 4096 x 2160 @ 60 Hz

<table><tr><td>Pin</td><td>Signal Name</td><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>HDMI1_CON_DP2</td><td>2</td><td>GND</td></tr><tr><td>3</td><td>HDMI1_CON_DN2</td><td>4</td><td>HDMI1_CON_DP1</td></tr><tr><td>5</td><td>GND</td><td>6</td><td>HDMI1_CON_DN1</td></tr><tr><td>7</td><td>HDMI1_CON_DP0</td><td>8</td><td>GND</td></tr><tr><td>9</td><td>HDMI1_CON_DN0</td><td>10</td><td>HDMI1_CON_CKP</td></tr><tr><td>11</td><td>GND</td><td>12</td><td>HDMI1_CON_CKN</td></tr><tr><td>13</td><td>N/C</td><td>14</td><td>N/C</td></tr><tr><td>15</td><td>HDMI1_DDC_CLK</td><td>16</td><td>HDMI1_DDC_DATA</td></tr><tr><td>17</td><td>GND</td><td>18</td><td>+5V</td></tr><tr><td>19</td><td>HDMI1_CON_HPD</td><td colspan="2"></td></tr></table>

![19 17\n3 1\n18\n2](.amitx-rl-wv-50m-16008-2010-11/c871118a12e79e732e4f0ceffd2030151f14e7c413de45698904526b4f8cd2c4.jpg)

# 4.1.3 Ethernet Connectors (LAN1, LAN2)

LAN1/2: 10/100/1000/2500 Mbps LAN Ethernet controllers based on i225-V

<table><tr><td>Pin</td><td>10BASE-T/100BASE-TX</td><td>1000BASE-T</td></tr><tr><td>1</td><td>TX+</td><td>LAN_MDI0+</td></tr><tr><td>2</td><td>TX-</td><td>LAN_MDI0-</td></tr><tr><td>3</td><td>RX+</td><td>LAN_MDI1+</td></tr><tr><td>4</td><td>--</td><td>LAN_MDI2+</td></tr><tr><td>5</td><td>--</td><td>LAN_MDI2-</td></tr><tr><td>6</td><td>RX-</td><td>LAN_MDI1-</td></tr><tr><td>7</td><td>--</td><td>LAN_MDI3+</td></tr><tr><td>8</td><td>--</td><td>LAN_MDI3-</td></tr></table>

![ACT/LINK\nSPEED\nLED\nLED](.amitx-rl-wv-50m-16008-2010-11/30b12227c1afd5d884327f6713b179e2f1d1ac609f8cf045d7e7b60b7f49b417.jpg)

LED Behavior

<table><tr><td colspan="5">LAN LED Indications</td></tr><tr><td colspan="2">Activity Link LED</td><td></td><td colspan="2">SPEED LED</td></tr><tr><td>Status</td><td>Description</td><td rowspan="4"></td><td>Status</td><td>Description</td></tr><tr><td>Off</td><td>No Link</td><td>Off</td><td>10Mbps</td></tr><tr><td>On</td><td>Link</td><td>Orange</td><td>100Mbps/1Gbps connection</td></tr><tr><td>Blinking</td><td>Data Activity</td><td>Green</td><td>2.5Gbps connection</td></tr></table>

# 4.1.4 USB Connectors

2x USB3.2 Gen2 x1, 2x USB2.0

<table><tr><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>+5VDC</td></tr><tr><td>2</td><td>USB_N</td></tr><tr><td>3</td><td>USB_P</td></tr><tr><td>4</td><td>GND</td></tr><tr><td>5</td><td>USB3_RX_N</td></tr><tr><td>6</td><td>USB3_RX_P</td></tr><tr><td>7</td><td>GND</td></tr><tr><td>8</td><td>USB3_TX_N</td></tr><tr><td>9</td><td>USB3_TX_P</td></tr></table>

![9\n8\n7\n6\n5\n1\n2\n3\n4](.amitx-rl-wv-50m-16008-2010-11/de2549edf70f21ad1fab9c384386d4af019bd1560b06a8717f6b4f29e2940c19.jpg)

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>VCC</td></tr><tr><td>2</td><td>UV0-</td></tr><tr><td>3</td><td>UV0+</td></tr><tr><td>4</td><td>GND</td></tr></table>

![This is a black-and-white line drawing of a rectangular electronic connector housing, depicted in a 3D perspective. On the right side of the housing, the numbers 1, 2, 3, and 4 are stacked vertically. Next to each number is a small rectangular outline, likely indicating pin positions. The drawing shows the external walls and a central cavity structure.](.amitx-rl-wv-50m-16008-2010-11/546ae404dab7f3e32bb021052998535b3b3a58a0f57bbd9b9960e6338644c91c.jpg)

# 4.1.5 Audio Connectors

• One Line-out, and one Mic-in on rear I/O
Realtek ALC897 codec

# 4.2 Internal Connectors

# 4.2.1 ATX Power Connector (DC\_4PIN1)

<table><tr><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>GND</td></tr><tr><td>2</td><td>GND</td></tr><tr><td>3</td><td>DC Input</td></tr><tr><td>4</td><td>DC Input</td></tr></table>

![The image shows a black-and-white line drawing of a square frame divided into four quadrants. Inside each quadrant is a smaller square shape.\n\n*   **Top-Left Quadrant:** Contains a square shape with a cutout on its left side.\n*   **Bottom-Left Quadrant:** Contains a square shape with a cutout on its left side.\n*   **Top-Right Quadrant:** Contains a simple square shape.\n*   **Bottom-Right Quadrant:** Contains a square shape with a cutout on its right side.\n\nOutside the main frame, numbers label the quadrants:\n*   **1** is to the right of the top-right quadrant.\n*   **2** is to the right of the bottom-right quadrant.\n*   **3** is to the left of the top-left quadrant.\n*   **4** is to the left of the bottom-left quadrant.\n\nA vertical bracket connects the left side of the frame, aligning with the numbers 3 and 4.](.amitx-rl-wv-50m-16008-2010-11/ed63b751624583f3e2a4637165b143258b72b7bc619b02a7709352272c7fedd9.jpg)

# 4.2.2 SATA Connectors (SATA3\_1-2)

Two SATA 6 Gbps ports are available on AmITX-RL-WV.

The Serial ATA3 (SATA3) connector supports SATA data cables for internal storage devices. The current SATA3 interface allows up to 6.0 Gb/s data transfer rate.

<table><tr><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>GND</td></tr><tr><td>2</td><td>SATA-A+</td></tr><tr><td>3</td><td>SATA-A-</td></tr><tr><td>4</td><td>GND</td></tr><tr><td>5</td><td>SATA-B-</td></tr><tr><td>6</td><td>SATA-B+</td></tr><tr><td>7</td><td>GND</td></tr></table>

![SATA3_2\nSATA3_1](.amitx-rl-wv-50m-16008-2010-11/5720168da56515951da9ce0cc3175b8d804e3aec0269994c9b6cf4f785399250.jpg)

# 4.2.3 USB 2.0 Header (USB2\_5\_6)

2x USB 2.0.

The board provides one internal USB 2.0 header and the connector can support two USB 2.0. The maximum current per port is 0.5A.

<table><tr><td>Pin</td><td>Signal Name</td><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>USB_PWR</td><td>2</td><td>USB_PWR</td></tr><tr><td>3</td><td>P-</td><td>4</td><td>P-</td></tr><tr><td>5</td><td>P+</td><td>6</td><td>P+</td></tr><tr><td>7</td><td>GND</td><td>8</td><td>GND</td></tr><tr><td>9</td><td></td><td>10</td><td>DUMMY</td></tr></table>

![A black and white line drawing of a rectangular integrated circuit package, specifically a 10-pin DIP (Dual In-line Package).\n\nThe four corners are labeled with numbers:\n- **1** in the top left.\n- **2** in the top right.\n- **9** in the bottom left.\n- **10** in the bottom right.\n\nInside the rectangle, pins are represented by shapes:\n- **Pin 1** (top left) is a square containing a smaller square.\n- **Pin 2** (top right) is a circle.\n- **Pin 10** (bottom right) is a circle.\n- **Pin 9** (bottom left) is indicated only by the number, with no corresponding shape drawn.\n\nThe remaining pins are arranged in two columns:\n- **Left Column:** Three circles are arranged vertically below Pin 1.\n- **Right Column:** Five circles are arranged vertically, including Pin 2 at the top and Pin 10 at the bottom, with three circles in between.](.amitx-rl-wv-50m-16008-2010-11/a8b8ea5e1aee92b54f619577a93f42f68521d85c024a700475e235dad967307c.jpg)

# USB Cable (optional):

USB 2.0 Header to 2x Female Type-A Cable (length 150mm), P/N: 30-21625-0000-B0

![Pure electrical connector diagram showing internal cable and terminal block without any text or symbols](.amitx-rl-wv-50m-16008-2010-11/034c158979b7b157cfef7ffc927b17d52ebfbf6fc650c8702094577f0713251b.jpg)

# 4.2.4 USB 3.2 Gen1 Header (USB3\_4\_9)

1x USB 3.2 Gen1 and 1x USB 2.0

There is only a single USB 3.2 Gen1 connector on this motherboard. This header can support one port USB 3.2

Gen1 and one port USB 2.0 with a maximum power current of 0.9A per port.

<table><tr><td>Pin</td><td>Signal Name</td><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>DUMMY</td><td>2</td><td>IntA_PA_D+</td></tr><tr><td>3</td><td>IntA_PB_D+</td><td>4</td><td>IntA_PA_D-</td></tr><tr><td>5</td><td>IntA_PB_D-</td><td>6</td><td>GND</td></tr><tr><td>7</td><td>GND</td><td>8</td><td>IntA_PA_SSTX+</td></tr><tr><td>9</td><td>DUMMY</td><td>10</td><td>IntA_PA_SSTX-</td></tr><tr><td>11</td><td>DUMMY</td><td>12</td><td>GND</td></tr><tr><td>13</td><td>GND</td><td>14</td><td>IntA_PA_SSRX+</td></tr><tr><td>15</td><td>DUMMY</td><td>16</td><td>IntA_PA_SSRX-</td></tr><tr><td>17</td><td>DUMMY</td><td>18</td><td>Vbus</td></tr><tr><td>19</td><td>Vbus</td><td>20</td><td></td></tr></table>

![1\n2\n19\n20](.amitx-rl-wv-50m-16008-2010-11/480f2c144e11bf6a30f7721213ae00a8d2abcca5e30aa03444c060e0225cfd40.jpg)

# USB Cable (optional):

USB 3.0 Header to 2x Female Type-A Cable (length 150mm), P/N: 30-21597-1000-A0

![Technical line drawing of a mechanical component with a connector and cable (no text or symbols)](.amitx-rl-wv-50m-16008-2010-11/3b1c6f8d272c86f75385818b82f28cd9eb761bb375967e09d71aa7cd9b6acc5d.jpg)

# 4.2.5 Front Panel Audio Header (HD\_AUDIO1)

This is a line out/microphone interface for the front panel audio cable that allows jack detection, and provides a convenient connection and control of audio devices.

1. High-Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system.
2. If you use AC’97 audio panel, please install it to the front panel audio header as below:

A. Connect Mic\_IN (MIC) to MIC2\_L.

B. Connect Audio\_R (RIN) to OUT2\_R and Audio\_L (LIN) to OUT2\_L.

C. Connect Ground (GND) to Ground (GND).

D. MIC\_RET and OUT\_RET are for HD audio panel only. You don’t need to connect them for AC’97 audio panel.

E. To activate the front mic.

Go to the “FrontMic” Tab in the Realtek Control panel. Adjust “Recording Volume”.

<table><tr><td>Pin</td><td>Signal Name</td><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>MIC2_L</td><td>2</td><td>GND</td></tr><tr><td>3</td><td>MIC2_R</td><td>4</td><td></td></tr><tr><td>5</td><td>OUT2_R</td><td>6</td><td>MIC_RET</td></tr><tr><td>7</td><td>J_SENSE</td><td>8</td><td></td></tr><tr><td>9</td><td>OUT2_L</td><td>10</td><td>OUT_RET</td></tr></table>

![This image features a tall, vertical black rectangle in the center. Inside the rectangle are two columns of shapes. The left column contains four circles. The right column contains three circles at the top and a square at the bottom.\n\nSurrounding the rectangle are four numbers:\n*   **10** is at the top left.\n*   **9** is at the top right.\n*   **2** is at the bottom left.\n*   **1** is at the bottom right.](.amitx-rl-wv-50m-16008-2010-11/b07b97b0aa3105062c06697240ea022750ca9db4f728eadd1a78a19c5434a2fd.jpg)

# 4.2.6 CPU Fan and Chassis Fan Connectors (+12V) (CPU\_FAN1, CHA\_FAN1)

The board offers three 4-pin CPU fan (Smart Fan) connectors that are compatible with 3-pin CPU fan. If you connect a 3-pin CPU fan to the CPU fan connector on this motherboard, please connect it to pin 1-3. The maximum current is 1A.

<table><tr><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>GND</td></tr><tr><td>2</td><td>+12V</td></tr><tr><td>3</td><td>FAN_SPEED</td></tr><tr><td>4</td><td>FAN_SPEED_CONTROL</td></tr></table>

![The image displays a black and white line drawing. On the left is a vertical rectangular outline divided by a vertical line into two columns. To the right of this structure are four horizontal rows. Each row features a black shape followed by a number on the far right. The top row shows a square and the number 1. The following rows show a circle and the numbers 2, 3, and 4 respectively.](.amitx-rl-wv-50m-16008-2010-11/baa1d1fffac2eca29458ca11d54289a5c73aad4c4208ccd97ade27a32a4c71d3.jpg)

# 4.2.7 Serial COM Port Connector (COM1,2,3,4)

Four internal serial ports (COM1,2,3,4). Serial ports are over-current protected.

<table><tr><td>Serial Port</td><td>Functions</td></tr><tr><td>COM1,2</td><td>Supports RS-232/422/485</td></tr><tr><td>COM3,4</td><td>Supports RS-232</td></tr></table>

There are four 2.54mm-pitch COM port headers (COM1 - COM4). The maximum current is 1A per port. The power supply of pin 9 is either 5V or 12V;

Use the COM port pin 9 PWR Setting Jumper to control it.

<table><tr><td>Pin</td><td>RS232</td><td>RS422</td><td>RS485</td></tr><tr><td>1</td><td>DCD</td><td>TX-</td><td>RTX-</td></tr><tr><td>2</td><td>RXD</td><td>TX+</td><td>RTX+</td></tr><tr><td>3</td><td>TXD</td><td>RX+</td><td>N/A</td></tr><tr><td>4</td><td>DTR</td><td>RX-</td><td>N/A</td></tr><tr><td>5</td><td>GND</td><td>GND</td><td>GND</td></tr><tr><td>6</td><td>DSR</td><td>N/A</td><td>N/A</td></tr><tr><td>7</td><td>RTS</td><td>N/A</td><td>N/A</td></tr><tr><td>8</td><td>CTS</td><td>N/A</td><td>N/A</td></tr><tr><td>9</td><td>PWR</td><td>PWR</td><td>PWR</td></tr></table>

![The image displays a pinout diagram. On the left side, the numbers 1, 3, 5, 7, and 9 appear vertically. On the right side, the numbers 2, 4, 6, and 8 appear vertically. Inside a central rectangular outline, there are corresponding pin indicators: a solid square at position 1, solid circles at positions 2 through 9, and a hollow circle (ring) in the bottom right corner.](.amitx-rl-wv-50m-16008-2010-11/ecdcf3f03930b631bd213ec3ddb95842b599e994fe825d00d8200a3f369da04a.jpg)

# COM Cable (optional):

COM Port Cable (length 350mm), P/N: 30-22155-0000-A0

![Diagram of a long straight electrical connector with multiple input/output lines, no text or symbols present](.amitx-rl-wv-50m-16008-2010-11/2576f65b8ab0835daad114d5e6e90bb183d6b9b9fe59d48803fdf8da7bbd30e9.jpg)

4.2.8 LVDS Panel Connector\* (LVDS1)

<table><tr><td>Pin</td><td>Signal Name</td><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>LCD_VCC</td><td>2</td><td>LCD_VCC</td></tr><tr><td>3</td><td>+3.3V</td><td>4</td><td>LDDC_CLK</td></tr><tr><td>5</td><td>LDDC_DATA</td><td>6</td><td>LVDS_A_DATA0#</td></tr><tr><td>7</td><td>LVDS_A_DATA0</td><td>8</td><td>LDDC_DATA</td></tr><tr><td>9</td><td>LVDS_A_DATA1#</td><td>10</td><td>LVDS_A_DATA1</td></tr><tr><td>11</td><td>GND</td><td>12</td><td>LVDS_A_DATA2#</td></tr><tr><td>13</td><td>LVDS_A_DATA2</td><td>14</td><td>GND</td></tr><tr><td>15</td><td>LVDS_A_DATA3#</td><td>16</td><td>LVDS_A_DATA3</td></tr><tr><td>17</td><td>GND</td><td>18</td><td>LVDS_A_CLK#</td></tr><tr><td>19</td><td>LVDS_A_CLK</td><td>20</td><td>GND</td></tr><tr><td>21</td><td>LVDS_B_DATA0#</td><td>22</td><td>LVDS_B_DATA0</td></tr><tr><td>23</td><td>GND</td><td>24</td><td>LVDS_B_DATA1#</td></tr><tr><td>25</td><td>LVDS_B_DATA1</td><td>26</td><td>GND</td></tr><tr><td>27</td><td>LVDS_B_DATA2#</td><td>28</td><td>LVDS_B_DATA2</td></tr><tr><td>29</td><td>DPLVDD_EN</td><td>30</td><td>LVDS_B_DATA3#</td></tr><tr><td>31</td><td>LVDS_B_DATA3</td><td>32</td><td>GND</td></tr><tr><td>33</td><td>LVDS_B_CLK#</td><td>34</td><td>LVDS_B_CLK</td></tr><tr><td>35</td><td>GND</td><td>36</td><td>CON_LBKLT_EN</td></tr><tr><td>37</td><td>CON_LBKLT_CTL</td><td>38</td><td>LCD_BLT_VCC</td></tr><tr><td>39</td><td>LCD_BLT_VCC</td><td>40</td><td>LCD_BLT_VCC</td></tr></table>

![39\n40\n1\n2](.amitx-rl-wv-50m-16008-2010-11/17be170aba7507e0afd265c5c96418bc6616dba4297c60c97d898aead6101dbf.jpg)

\*eDP connector (on the rear side of PCB)

<table><tr><td>Pin</td><td>Signal Name</td></tr><tr><td>40</td><td>NA</td></tr><tr><td>39</td><td>LCD_BLT_VCC</td></tr><tr><td>38</td><td>LCD_BLT_VCC</td></tr><tr><td>37</td><td>LCD_BLT_VCC</td></tr><tr><td>36</td><td>LCD_BLT_VCC</td></tr><tr><td>35</td><td>SMB_CLK_MAIN</td></tr><tr><td>34</td><td>SMB_DATA_MAIN</td></tr><tr><td>33</td><td>eDP_BKLTCTL_R</td></tr><tr><td>32</td><td>eDP_BKLTEN</td></tr><tr><td>31</td><td>GND</td></tr><tr><td>30</td><td>GND</td></tr><tr><td>29</td><td>GND</td></tr><tr><td>28</td><td>GND</td></tr></table>

![EDP1\n40\n1](.amitx-rl-wv-50m-16008-2010-11/b19b5b70ebdbc3cd6b528cd03d3d413fc854b2e5f4784f50dc9e5783d72bd54e.jpg)

<table><tr><td>27</td><td>eDP_HPD_CON</td></tr><tr><td>26</td><td>GND</td></tr><tr><td>25</td><td>GND</td></tr><tr><td>24</td><td>GND</td></tr><tr><td>23</td><td>GND</td></tr><tr><td>22</td><td>NA</td></tr><tr><td>21</td><td>LCD_VCC</td></tr><tr><td>20</td><td>LCD_VCC</td></tr><tr><td>19</td><td>LCD_VCC</td></tr><tr><td>18</td><td>LCD_VCC</td></tr><tr><td>17</td><td>GND</td></tr><tr><td>16</td><td>eDP_AUX#_CON</td></tr><tr><td>15</td><td>eDP_AUX_CON</td></tr><tr><td>14</td><td>GND</td></tr><tr><td>13</td><td>eDP_TX0_CON</td></tr><tr><td>12</td><td>eDP_TX#0_CON</td></tr><tr><td>11</td><td>GND</td></tr><tr><td>10</td><td>eDP_TX1_CON</td></tr><tr><td>9</td><td>eDP_TX#1_CON</td></tr><tr><td>8</td><td>GND</td></tr><tr><td>7</td><td>eDP_TX2_CON</td></tr><tr><td>6</td><td>eDP_TX#2_CON</td></tr><tr><td>5</td><td>GND</td></tr><tr><td>4</td><td>eDP_TX3_CON</td></tr><tr><td>3</td><td>eDP_TX#3_CON</td></tr><tr><td>2</td><td>GND</td></tr><tr><td>1</td><td>NA</td></tr></table>

# 4.2.9 System Panel Header (PANEL1)

This header accommodates several system front panel functions. Connect the power switch, reset switch, and system status indicator on the chassis to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables.

<table><tr><td>Pin</td><td>Signal Name</td><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>HDLED+</td><td>2</td><td>PLED+</td></tr><tr><td>3</td><td>HDLED-</td><td>4</td><td>PLED-</td></tr><tr><td>5</td><td>GND</td><td>6</td><td>PWRBTN#</td></tr><tr><td>7</td><td>RESET#</td><td>8</td><td>GND</td></tr><tr><td>9</td><td>GND</td><td>10</td><td></td></tr></table>

![2\n10\n1\n9](.amitx-rl-wv-50m-16008-2010-11/f544068ff4d030c4c94ee5f1c54b1f766622bc9d07d4896dd2c65c8898172e34.jpg)

# PWRBTN (Power Switch):

Connect to the power switch on the chassis front panel. You may configure how to turn off your system using the power switch.

# RESET (Reset Switch):

Connect to the reset switch on the chassis front panel. Press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart.

# PLED (System Power LED):

Connect to the power status indicator on the chassis front panel. The LED is turned on when the system is operating. The LED blinks when the system is in the S1 sleep state. The LED is off when the system is in the S3/S4 sleep state or powered off (S5).

# HDLED (Hard Drive Activity LED):

Connect to the hard drive activity LED on the chassis front panel. The LED is turned on when the hard drive is reading or writing data. The front panel design may differ by chassis. A front panel module mainly consists of power switch, reset switch, power LED, hard drive activity LED, speaker, etc. When connecting your chassis front panel module to this header, make sure the wire and the pin assignments are matched correctly.

# 4.2.10 Chassis Intrusion Header (CI1\_2)

This motherboard supports CASE OPEN detection feature that detects if the chassis cover has been removed. This feature requires a chassis with chassis intrusion detection design.

<table><tr><td>PIN 1-2 Open</td><td>Normal</td></tr><tr><td>PIN 1-2 Short</td><td>Active Case Open</td></tr><tr><td>PIN 3-4 Open</td><td>Active Case Open (Default)</td></tr><tr><td>PIN 3-4 Short</td><td>Normal</td></tr></table>

![The image shows a vertical, black-outlined rectangle containing four symbols stacked in a column. The top three symbols are hollow circles, while the bottom symbol is a square containing a circle. To the right of the rectangle, the number '4' is positioned near the top, and the number '1' is positioned near the bottom.](.amitx-rl-wv-50m-16008-2010-11/1150e10595f5993a345c41abf5aa75a4e49e69e5abd980b379b6567a5e4bbbfc.jpg)

# 4.2.11 ESPI Header (ESPI1)

The header is reserved for Port 80 code. display and debugging purposes.

<table><tr><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>GND</td></tr><tr><td>2</td><td>C_ESPI_CLK</td></tr><tr><td>3</td><td>GND</td></tr><tr><td>4</td><td>C_ESPI_CS#</td></tr><tr><td>5</td><td>DEBUG_RESET</td></tr><tr><td>6</td><td>GND</td></tr><tr><td>7</td><td>+3V</td></tr><tr><td>8</td><td>GND</td></tr><tr><td>9</td><td>SMB_CLK_MAIN</td></tr><tr><td>10</td><td>SMB_DATA_MAIN</td></tr><tr><td>11</td><td>C_ESPI_IO0</td></tr><tr><td>12</td><td>C_ESPI_IO1</td></tr><tr><td>13</td><td>C_ESPI_IO2</td></tr></table>

![This is a black and white line drawing of a connector pinout diagram. At the top, there is a thick black outline forming an inverted U-shape with thick, horizontal feet on the left and right sides. Inside this outline is a row of 18 thin, vertical, parallel lines evenly spaced apart. Below the left thick foot is the number '1', and below the right thick foot is the number '20', indicating a 20-position header.](.amitx-rl-wv-50m-16008-2010-11/abc66abe168e4f15620ec1de7ec205e356e6a98bd9c216273f8b186d57dfb923.jpg)

<table><tr><td>Pin</td><td>Signal Name</td></tr><tr><td>14</td><td>C_ESPI_IO3</td></tr><tr><td>15</td><td>GND</td></tr><tr><td>16</td><td>+3VSB</td></tr><tr><td>17</td><td>N/A</td></tr><tr><td>18</td><td>N/A</td></tr><tr><td>19</td><td>C_ESPI_ALERT#</td></tr><tr><td>20</td><td>GND</td></tr></table>

# 4.2.12 8-bit GPIO (JGPIO1)

<table><tr><td>Pin</td><td>Signal Name</td><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>SIO_GP71</td><td>2</td><td>GPP_H23</td></tr><tr><td>3</td><td>SIO_GP72</td><td>4</td><td>GPP_I10</td></tr><tr><td>5</td><td>SIO_GP73</td><td>6</td><td>GPP_E5</td></tr><tr><td>7</td><td>SIO_GP74</td><td>8</td><td>GPP_E6</td></tr><tr><td>9</td><td>JGPIOPWR_R</td><td>10</td><td>GND</td></tr></table>

![10\n2\n9\n1](.amitx-rl-wv-50m-16008-2010-11/4cb9897a44ddc8d53339a8fae168848dca884a87bee2b424a2dfee7f419e410c.jpg)

# Output (Pin1,3,5,7)

<table><tr><td>Parameter</td><td>Range</td></tr><tr><td>GPIO output low voltage</td><td>Max: 0.4V</td></tr><tr><td>GPIO output high voltage</td><td>Low: 2.4V</td></tr><tr><td colspan="2">Note: Max. load per GPO pin: 12 mACurrent max. 1A per power pin</td></tr></table>

# Input (Pin2,4,6,8)

<table><tr><td>Parameter</td><td>Range</td></tr><tr><td>GPIO input low voltage</td><td>Max: 1V</td></tr><tr><td>GPIO input high voltage</td><td>Low: 2.3V</td></tr><tr><td colspan="2">Note: Max. load per GPI pin: 5μACurrent max. 1A per power pin</td></tr></table>

# 4.2.13 M.2 M-Key Socket (M2\_B1)

<table><tr><td>Pin</td><td>Signal Name</td><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>NA</td><td>2</td><td>+3.3V</td></tr><tr><td>3</td><td>GND</td><td>4</td><td>+3.3V</td></tr><tr><td>5</td><td>GND</td><td>6</td><td>FuLL Card_Power_off</td></tr><tr><td>7</td><td>USB_D+</td><td>8</td><td>W_DISABLE</td></tr><tr><td>9</td><td>USB_D-</td><td>10</td><td>WWAN_LED#</td></tr><tr><td>11</td><td>GND</td><td></td><td></td></tr><tr><td></td><td></td><td></td><td></td></tr><tr><td>21</td><td>GND</td><td>20</td><td>NA</td></tr><tr><td>23</td><td>NA</td><td>22</td><td>NA</td></tr><tr><td>25</td><td>NA</td><td>24</td><td>NA</td></tr><tr><td>27</td><td>GND</td><td>26</td><td>NA</td></tr><tr><td>29</td><td>USB3_RX-</td><td>28</td><td>NA</td></tr><tr><td>31</td><td>USB3_RX+</td><td>30</td><td>UIM_RESET</td></tr><tr><td>33</td><td>GND</td><td>32</td><td>UIM_CLK</td></tr><tr><td>35</td><td>USB3_TX-</td><td>34</td><td>UIM_DATA</td></tr><tr><td>37</td><td>USB3_TX+</td><td>36</td><td>UIM_PWR</td></tr><tr><td>39</td><td>GND</td><td>38</td><td>NA</td></tr><tr><td>41</td><td>PERn0</td><td>40</td><td>NA</td></tr><tr><td>43</td><td>PERP0</td><td>42</td><td>NA</td></tr><tr><td>45</td><td>GND</td><td>44</td><td>NA</td></tr><tr><td>47</td><td>PETn0</td><td>46</td><td>NA</td></tr><tr><td>49</td><td>PETP0</td><td>48</td><td>NA</td></tr><tr><td>51</td><td>GND</td><td>50</td><td>PERST#</td></tr><tr><td>53</td><td>PEFCLKn</td><td>52</td><td>CLKREQ#</td></tr><tr><td>55</td><td>PEFCLKp</td><td>54</td><td>WAKE#</td></tr><tr><td>57</td><td>GND</td><td>56</td><td>NA</td></tr><tr><td>59</td><td>NA</td><td>58</td><td>NA</td></tr><tr><td>61</td><td>NA</td><td>60</td><td>NA</td></tr><tr><td>63</td><td>NA</td><td>62</td><td>NA</td></tr><tr><td>65</td><td>NA</td><td>64</td><td>NA</td></tr><tr><td>67</td><td>NA</td><td>66</td><td>NA</td></tr><tr><td>69</td><td>NA</td><td>68</td><td>NA</td></tr><tr><td>71</td><td>GND</td><td>70</td><td>+3.3V</td></tr><tr><td>73</td><td>GND</td><td>72</td><td>+3.3V</td></tr><tr><td>75</td><td>NA</td><td>74</td><td>+3.3V</td></tr></table>

4.2.14 M.2 Mkey Socket (M2\_M1)

<table><tr><td>Pin</td><td>Signal Name</td><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>GND</td><td>2</td><td>+3.3V</td></tr><tr><td>3</td><td>GND</td><td>4</td><td>+3.3V</td></tr><tr><td>5</td><td>PERn3</td><td>6</td><td>NA</td></tr><tr><td>7</td><td>PERp3</td><td>8</td><td>NA</td></tr><tr><td>9</td><td>GND</td><td>10</td><td>SATA_LED</td></tr><tr><td>11</td><td>PETn3</td><td>12</td><td>+3.3V</td></tr><tr><td>13</td><td>PETp3</td><td>14</td><td>+3.3V</td></tr><tr><td>15</td><td>GND</td><td>16</td><td>+3.3V</td></tr><tr><td>17</td><td>PERn2</td><td>18</td><td>+3.3V</td></tr><tr><td>19</td><td>PERp2</td><td>20</td><td>NA</td></tr><tr><td>21</td><td>GND</td><td>22</td><td>NA</td></tr><tr><td>23</td><td>PETn2</td><td>24</td><td>NA</td></tr><tr><td>25</td><td>PETp2</td><td>26</td><td>NA</td></tr><tr><td>27</td><td>GND</td><td>28</td><td>NA</td></tr><tr><td>29</td><td>PERn1</td><td>30</td><td>NA</td></tr><tr><td>31</td><td>PERp1</td><td>32</td><td>NA</td></tr><tr><td>33</td><td>GND</td><td>34</td><td>NA</td></tr><tr><td>35</td><td>PETn1</td><td>36</td><td>NA</td></tr><tr><td>37</td><td>PETp1</td><td>38</td><td>DEVSLP</td></tr><tr><td>39</td><td>GND</td><td>40</td><td>NA</td></tr><tr><td>41</td><td>PERn0</td><td>42</td><td>NA</td></tr><tr><td>43</td><td>PERp0</td><td>44</td><td>NA</td></tr><tr><td>45</td><td>GND</td><td>46</td><td>NA</td></tr><tr><td>47</td><td>PETn0</td><td>48</td><td>NA</td></tr><tr><td>49</td><td>PETp0</td><td>50</td><td>PERST#</td></tr><tr><td>51</td><td>GND</td><td>52</td><td>CLKREQ#</td></tr><tr><td>53</td><td>PEFCLKn</td><td>54</td><td>WAKE#</td></tr><tr><td>55</td><td>PEFCLKp</td><td>56</td><td>NA</td></tr><tr><td>57</td><td>GND</td><td>58</td><td>NA</td></tr><tr><td></td><td></td><td></td><td></td></tr><tr><td>67</td><td>NA</td><td>68</td><td>NA</td></tr><tr><td>69</td><td>PEDET</td><td>70</td><td>+3.3V</td></tr><tr><td>71</td><td>GND</td><td>72</td><td>+3.3V</td></tr><tr><td>73</td><td>GND</td><td>0</td><td>+3.3V</td></tr><tr><td>75</td><td>GND</td><td></td><td></td></tr></table>

4.2.15 M.2 E-Key Socket (M2\_E1)

<table><tr><td>Pin</td><td>Signal Name</td><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>GND</td><td>2</td><td>+3.3V</td></tr><tr><td>3</td><td>USB_D+</td><td>4</td><td>+3.3V</td></tr><tr><td>5</td><td>USB_D-</td><td>6</td><td>NA</td></tr><tr><td>7</td><td>GND</td><td>8</td><td>NA</td></tr><tr><td>9</td><td>CNV_WGR_D1-</td><td>10</td><td>CNV_RF_RESET</td></tr><tr><td>11</td><td>CNV_WGR_D1+</td><td>12</td><td>NA</td></tr><tr><td>13</td><td>GND</td><td>14</td><td>MODEM_CLKREQ</td></tr><tr><td>15</td><td>CNV_WGR_D0-</td><td>16</td><td>NA</td></tr><tr><td>17</td><td>CNV_WGR_D0+</td><td>18</td><td>GND</td></tr><tr><td>19</td><td>GND</td><td>20</td><td>NA</td></tr><tr><td>21</td><td>CNV_WGR_CLK-</td><td>22</td><td>CNV_BRI_RSP</td></tr><tr><td>23</td><td>CNV_WGR_CLK+</td><td></td><td></td></tr><tr><td></td><td></td><td></td><td></td></tr><tr><td>33</td><td>GND</td><td>32</td><td>CNV_BGI_DT</td></tr><tr><td>35</td><td>PETp</td><td>34</td><td>CNV_RGI_RSP</td></tr><tr><td>37</td><td>PETn</td><td>36</td><td>CNV_BRI_DT</td></tr><tr><td>39</td><td>GND</td><td>38</td><td>NA</td></tr><tr><td>41</td><td>PERp</td><td>40</td><td>NA</td></tr><tr><td>43</td><td>PERn</td><td>42</td><td>NA</td></tr><tr><td>45</td><td>GND</td><td>44</td><td>NA</td></tr><tr><td>47</td><td>PEFCLKp</td><td>46</td><td>NA</td></tr><tr><td>49</td><td>PEFCLKn</td><td>48</td><td>NA</td></tr><tr><td>51</td><td>GND</td><td>50</td><td>SUSCLK</td></tr><tr><td>53</td><td>CLKREQ#</td><td>52</td><td>PERST0#</td></tr><tr><td>55</td><td>WAKE#</td><td>54</td><td>W_DISABLE1#</td></tr><tr><td>57</td><td>GND</td><td>56</td><td>W_DISABLE2#</td></tr><tr><td>59</td><td>CNV_WT_D1-</td><td>58</td><td>NA</td></tr><tr><td>61</td><td>CNV_WT_D1+</td><td>60</td><td>NA</td></tr><tr><td>63</td><td>GND</td><td>62</td><td>NA</td></tr><tr><td>65</td><td>CNV_WT_D0-</td><td>64</td><td>CLKIN_XTAL_LCP</td></tr><tr><td>67</td><td>CNV_WT_D0+</td><td>66</td><td>NA</td></tr><tr><td>69</td><td>GND</td><td>68</td><td>NA</td></tr><tr><td>71</td><td>CNV_WT_CLK-</td><td>70</td><td>NA</td></tr><tr><td>73</td><td>CNV_WT_CLK+</td><td>72</td><td>+3.3V</td></tr><tr><td>75</td><td>GND</td><td>74</td><td>+3.3V</td></tr></table>

# 4.2.16 PCIe Slot

PCIe1 (PCIe 4.0 x16 slot) is used for PCI Express x16 lane-width cards.

Due to the power design of the motherboard, we recommend customers use the power adapter with the suggested DC-input voltage shown in the table below for system stability.

<table><tr><td>PCIE add-on card (Power consumption)</td><td>Suggested DC-input voltage</td></tr><tr><td>N/A</td><td>12V to 28V</td></tr><tr><td>75W or lower</td><td>19V to 28V</td></tr><tr><td>Higher than 75W*</td><td>24V to 28V</td></tr></table>

\* The VGA-PWR card (Optional) is required to support additional +12V input power for the PCIE add-on card.

# 4.3 Jumper and Switch Settings

# 4.3.1 PWR\_BAT1\_SIO\_AT1

Only supported by chargeable battery.

<table><tr><td>PIN 1-2 Open</td><td>Normal</td></tr><tr><td>PIN 1-2 Short</td><td>Charge Battery</td></tr><tr><td>PIN 3-4 Open</td><td>ATX Mode</td></tr><tr><td>PIN 3-4 Short</td><td>AT Mode</td></tr></table>

![The image shows a tall, vertical rectangular panel with a thick black border. Inside the panel, there are three white circles with black outlines stacked vertically. Below these circles is a white square with a black outline containing a smaller black circle. To the right of the panel, the number '4' is positioned near the top and the number '1' is positioned near the bottom.](.amitx-rl-wv-50m-16008-2010-11/3820b9ed49fec4a8036dc829d2cfd24f0ea43a83c0179e2d72e2dba52c0e11b7.jpg)

# 4.3.2 Clear CMOS Header (CLRMOS1)

<table><tr><td>1-2</td><td>Normal (Default)</td></tr><tr><td>2-3</td><td>Clear CMOS</td></tr></table>

![The image features a vertical column of shapes on the left, enclosed within a tall rectangular border. Inside the border, from top to bottom, are a circle, a second circle, and a square containing a smaller square. To the right of the column, the numbers 3, 2, and 1 appear in vertical alignment, corresponding to the top circle, middle circle, and bottom square respectively.](.amitx-rl-wv-50m-16008-2010-11/25f2fcecb6491d2daf34615220d2f376236a79f4b507aa9cd446b427c5b7cb7e.jpg)

Note: CLRMOS1 allows you to clear the data in CMOS. To clear and reset the system parameters to the default setup, turn off the computer and unplug the power cord from the power supply. After waiting for 15 seconds, use a jumper cap to short pins 2 and 3 on CLRMOS1 for 5 seconds. However, do not clear the CMOS immediately after updating the BIOS. If you need to clear the CMOS right after updating the BIOS, you must first boot up the system, then shut it down before performing the clear-CMOS action. Please note that the date, time, and user default profile will only be cleared if the CMOS battery is removed.

# 4.3.3 Brightness Control Mode (BLT\_PWM1)

Please set to 1-2 when adjusting brightness by Brightness Control bar under OS.

Please set to 2-3 when adjusting brightness by BLT\_VOL1.

<table><tr><td>1-2</td><td>From eDP PWM to CON_LBKLT_CTL</td></tr><tr><td>2-3</td><td>From LVDS PWM to CON_LBKLT_CTL (Default)</td></tr></table>

![The image displays a vertical rectangular outline containing three rows of items. On the left side of the outline, there is a column of shapes: a circle at the top, a circle in the middle, and a square at the bottom. To the right of each shape, aligned with its row, are the numbers '3', '2', and '1' respectively.](.amitx-rl-wv-50m-16008-2010-11/fc84acc1a5d1c1df8c8b24005c9269b5b4ebd8a4d06820b6068711bc6909ff0e.jpg)

# 4.3.4 COM Port PWR Setting Jumpers

PWR\_COM1 (For COM Port1)

PWR\_COM3 (For COM Port3)

The maximum current per port is 1A and the power supply is either 5V or 12V. Use the jumpers to set the power for COM port pin 9.

<table><tr><td>1-2</td><td>+5V</td></tr><tr><td>2-3</td><td>+12V</td></tr></table>

![The image displays a black and white line drawing of a rectangular strip containing three circular features arranged horizontally. On the far left, there is a square outline enclosing a circle. To its right are two additional circles spaced evenly apart. Below the rectangular strip, the numbers '1', '2', and '3' are printed, centered beneath each corresponding feature.](.amitx-rl-wv-50m-16008-2010-11/f3a339d7e5bf7ecbaf7bacc91f7c5f71cd10e2b3162e9d750c4700b950969447.jpg)

# 4.3.5 SATA Power Output Connector (SATA\_PWR1)

<table><tr><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>+5V</td></tr><tr><td>2</td><td>GND</td></tr><tr><td>3</td><td>GND</td></tr><tr><td>4</td><td>+12V</td></tr></table>

![The image displays a vertical list interface element. On the far left is a black vertical bar. Next to it is a white rectangular box containing four items arranged vertically: the top three are empty circles, and the bottom item is a square checkbox with a checkmark inside. To the right of the box, there are vertical lines and the numbers 4 and 1 visible.](.amitx-rl-wv-50m-16008-2010-11/9ae9c23cbe1a0b1ac45d83f98969697860d9d59f697ed691bcc07183ac37ac58.jpg)

# 4.3.6 Backlight Volume Control (BLT\_VOL1)

<table><tr><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>GPIO_VOL_UP</td></tr><tr><td>2</td><td>GPIO_VOL_DW</td></tr><tr><td>3</td><td>PWRDN</td></tr><tr><td>4</td><td>BLT_UP</td></tr><tr><td>5</td><td>BLT_DW</td></tr><tr><td>6</td><td>GND</td></tr><tr><td>7</td><td>GND</td></tr></table>

![The image displays a schematic diagram of a vertical rectangular connector housing. Inside the outline is a column of seven circles representing pins. The bottom-most circle contains a square shape. To the right of the connector, the number '7' aligns with the top pin, and the number '1' aligns with the bottom pin.](.amitx-rl-wv-50m-16008-2010-11/01cda46ff2ca3596a6038dd8651cec5bcf6f80c533887c65bb35df5662388df8.jpg)

# 4.3.7 Inverter Power Control Wafer (BLT\_PWR1)

<table><tr><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>GND</td></tr><tr><td>2</td><td>GND</td></tr><tr><td>3</td><td>CON_LBKLT_CTL</td></tr><tr><td>4</td><td>CON_LBKLT_EN</td></tr><tr><td>5</td><td>LCD_BLT_VCC</td></tr><tr><td>6</td><td>LCD_BLT_VCC</td></tr></table>

![The image displays a schematic diagram of a vertical connector header. It features a large rectangle with a thick black outline. Inside, a column of six small shapes is visible: five circles stacked vertically, followed by a square at the bottom. To the right of the rectangle, the number '6' aligns with the top row and the number '1' aligns with the bottom row.](.amitx-rl-wv-50m-16008-2010-11/34a9762a1fcdcd026f7878444453873c2c8406559be09404cd8a4d7b0a53809c.jpg)

# 4.3.8 Digital Input/Output Power Select (JGPIO\_PWR1)

The maximum current JGPIO\_PWR1 provides is 1A.

<table><tr><td>1-2</td><td>+12V (Default)</td></tr><tr><td>2-3</td><td>+5V</td></tr></table>

![The image is a black and white line drawing featuring a horizontal rectangular frame. Inside the frame, there are three shapes arranged in a row. The leftmost shape is a square with a circle inside it, resembling a button. To its right are two identical rings.](.amitx-rl-wv-50m-16008-2010-11/c332e3d73a46a530cf17f1b6ba3e55f037690311d1ce3227fff6cae041046ffd.jpg)
123

# 4.3.9 Panel Power Select (LCD\_VCC)

# (PNL\_PWR1)

Use this to set up the VDD power of the LVDS connector.

<table><tr><td>1-2</td><td>LCD_VCC: +3V (Default)</td></tr><tr><td>2-3</td><td>LCD_VCC: +5V</td></tr><tr><td>4-5</td><td>LCD_VCC: +12V</td></tr></table>

![The image displays a rectangular outline containing five symbols arranged horizontally. From left to right, there are four hollow circles followed by a square containing a circle. Below the rectangle, the number 5 is positioned on the left and the number 1 is on the right.](.amitx-rl-wv-50m-16008-2010-11/4f1bcbe5ac4b3374d5c2b4e3622705066a71ecb6a47b0598daabc7a053ab92e7.jpg)

# 4.3.10 Backlight Power Select (LCD\_BLT\_VCC)

# (BKT\_PWR1)

Use this header to set up the backlight power of the LVDS connector.

<table><tr><td>1-2</td><td>LCD_BLT_VCC: +5V (Default)</td></tr><tr><td>2-3</td><td>LCD_BLT_VCC: +12V</td></tr><tr><td>4-5</td><td>LCD_BLT_VCC: DC_IN</td></tr></table>

![The image displays the number '1' on the far left, followed by a rectangular bar divided into five equal sections, each containing a black-outlined circle.](.amitx-rl-wv-50m-16008-2010-11/daeb612a14bfc54b4b365492c1f75cb4916244d242f72faf57e2c74087b61153.jpg)

# 4.3.11 Digital Input/Output Default Value Setting (JGPIO\_SET1)

The header is used for GPIO default value setting for either pull high or pull low. Pulling the header to a high/low value means the voltage is anchored to VCC/GND, in a stable, non-floating state.

<table><tr><td>1-2</td><td>Pull-High (Default)</td></tr><tr><td>2-3</td><td>Pull-Low</td></tr></table>

![The image is a black and white line drawing showing a vertical rectangular outline. Inside, four shapes are stacked vertically. The top three shapes are circles. The bottom shape is a square containing a circle. To the right of the bottom square is a small square outline. Outside the main rectangle on the right side, the number 4 is aligned near the top and the number 1 is aligned near the bottom.](.amitx-rl-wv-50m-16008-2010-11/7c9db7d17cc41f28626cda70ae4933622d03ed60c05bcbd3d050e63cfe64f20d.jpg)

# 4.3.12 DACC1

Auto clear CMOS when system boot improperly.

<table><tr><td>PIN1-2 Open</td><td>No ACC (Default)</td></tr><tr><td>PIN1-2 Short</td><td>ACC</td></tr></table>

![The image displays a black-and-white graphic featuring two rectangular frames stacked vertically. Each frame is a thick black border containing a centered white circle. Directly below the bottom frame is a short, horizontal black line centered at the bottom.](.amitx-rl-wv-50m-16008-2010-11/5710428ee442939511fe5e846f325f3872d636f1398fe6f5c76b5f5f2a781c35.jpg)

# 4.3.13 SMBUS\_TEST1

<table><tr><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>+3V</td></tr><tr><td>2</td><td>SMB_CLK_MAIIN</td></tr></table>

![The image displays a simple line drawing. At the top, there is a rectangular outline with a thick black border. Inside this rectangle, four symbols are arranged in a horizontal row. The first three symbols are simple circles. The fourth symbol on the far right is a circle enclosed within a square. Below this rectangular section, there are two numbers: the number '4' is positioned on the left side, and the number '1' is positioned on the right side.](.amitx-rl-wv-50m-16008-2010-11/65dc514c31e9fbd1519626ac68c0a696e175505fcd80aaf03e7664ae1f12accd.jpg)

<table><tr><td>Pin</td><td>Signal Name</td></tr><tr><td>3</td><td>SMB_DATA_MAIN</td></tr><tr><td>4</td><td>GND</td></tr></table>

# 4.3.14 SPIDF Header (SPDIF1)

SPDIF header, providing SPDIF audio output to HDMI VGA card, allows the system to connect HDMI Digital TV/projector/LCD devices. Please connect the SPDIF connector of HDMI VGA card to this header.

<table><tr><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>+5V</td></tr><tr><td>2</td><td></td></tr><tr><td>3</td><td>SPDIF OUT</td></tr><tr><td>4</td><td>GND</td></tr></table>

![The image displays a schematic diagram featuring a large horizontal rectangle. Inside the rectangle, there is a square containing a central dot on the left side, and two circles on the right side. Below the rectangle, the number '1' is positioned on the left and the number '4' is positioned on the right.](.amitx-rl-wv-50m-16008-2010-11/f2c8d998a3e767ffefaf6c17bcb10d6cc87308ad7532eab16794664b0a60127e.jpg)

# 4.3.15 3W Audtio AMP Output Wafer (SPEAKER1)

<table><tr><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>OUTLN</td></tr><tr><td>2</td><td>OUTLP</td></tr><tr><td>3</td><td>OUTRP</td></tr><tr><td>4</td><td>OUTRN</td></tr></table>

![The image displays a black line drawing of a rectangular frame. Inside the frame, there are four shapes arranged horizontally: the leftmost shape is a square containing a smaller square, followed by three open circles. Below the drawing, the number '1' is positioned on the left side and the number '4' is on the right side.](.amitx-rl-wv-50m-16008-2010-11/f09806a566603e089c7fe6ee329bd78b2a3be8440be3bc0ad397be3da74d67cc.jpg)

# 4.3.16 Battery Connector (BAT1)

<table><tr><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>+BAT</td></tr><tr><td>2</td><td>GND</td></tr></table>

![The image displays a black-and-white line drawing of a schematic diagram. It features a large horizontal rectangle divided into three vertical sections.\n\n-   **Left Section:** A narrower vertical rectangle. Beneath it is the number '1'.\n-   **Middle Section:** A wider central rectangle containing two circles side-by-side.\n-   **Right Section:** A narrower vertical rectangle. Beneath it is the number '2'.](.amitx-rl-wv-50m-16008-2010-11/314280ddacd27dce71d453d1c803198af47cde4d1831ee44b879eda8bec20e33.jpg)

# 4.3.17 UPS Module Power Input Connector (TO\_UPS1)

<table><tr><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>GND</td></tr><tr><td>2</td><td>DC Input</td></tr></table>

![The image features a black outline resembling a computer monitor or screen. Inside the outline, there are two shapes: a circle on the left and a square containing a circle on the right. To the right of the monitor outline is the number '1'.](.amitx-rl-wv-50m-16008-2010-11/c526b7919163af7818060574ec24b776789f9d43e7829efb31e10d0b023aec1d.jpg)

# 4.3.18 Power Adapter (POWER\_ADAPTER)

<table><tr><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>GND</td></tr><tr><td>2</td><td>5VA_CONTROL</td></tr><tr><td>3</td><td>5VA</td></tr><tr><td>4</td><td>GND</td></tr></table>

![The image displays the number '1' in the top left corner. To its right is a tall, black rectangular outline. Inside this rectangle, four icons are stacked vertically. The top icon is a square with a circle inside it. Below that are three empty circles arranged in a vertical column.](.amitx-rl-wv-50m-16008-2010-11/f2a062c6e840a4d6843878ac8d26ccd2fd228416187cc8c7166fd80b34c34060.jpg)

# 4.3.19 AT\_TEST1\_PCIE\_PWR1

<table><tr><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td rowspan="2">AT_TEST1</td></tr><tr><td>2</td></tr><tr><td>3</td><td rowspan="2">PCIE_PWR1 (For VGA Power Card Only): Pin3: PSON# Pin4: GND</td></tr><tr><td>4</td></tr></table>

![The image displays the number '1' in the top left corner. Below it is a vertical column containing four white circles with black outlines, stacked one above the other. The entire column is enclosed within a black rectangular border.](.amitx-rl-wv-50m-16008-2010-11/3307398137b91081d26665c78fc968f95d9876cc5adadfcd87a192780f95a4af.jpg)

# 4.3.20 Inverter Power Control Wafer (BLT\_PWR2)

<table><tr><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>GND</td></tr><tr><td>2</td><td>GND</td></tr><tr><td>3</td><td>eDP_LBKLT_CTL</td></tr><tr><td>4</td><td>eDP_LBKLT_EN</td></tr><tr><td>5</td><td>+12_FUSE</td></tr><tr><td>6</td><td>+12_FUSE</td></tr></table>

![The image displays the digit '1' on the far left. Next to it is a rectangular frame with a thick black border. Inside the frame, there are six circles arranged in a horizontal row. The leftmost circle contains a small square, while the remaining five circles are empty.](.amitx-rl-wv-50m-16008-2010-11/0c9fcc42071f9f5075d25c586a46a4efa63d0e6a618b4940c51d7dabacc9c124.jpg)

# 5 Driver Installation

Drivers can be downloaded through the following link.

https://www.adlinktech.com/Products/Industrial\_Motherboards\_SBCs/Mini-ITXEmbeddedBoards/AmITX-RL-WV

This page intentionally left blank.

# 6 BIOS Settings

# 6.1 Menu Structure

This section presents the six primary menus of the UEFI (BIOS) Setup Utility. Use the following table as a quick reference for the contents of the BIOS Setup Utility. The subsections in this section describe the submenus and setting options for each menu item. The function of each setting is described in the right-hand column of the respective table.

There are two options to enter UEFI Setup Utility:

• Press [F2] or [Del] during POST (Power-On-Self-Test)
• Press [Ctl] + [Alt] + [Del] after POST

<table><tr><td>Main</td><td>Advanced</td><td>H/W Monitor</td></tr><tr><td>Sets up the system time/date and displays the system information:- System Date- System Time- BIOS Information- Memory Information</td><td>Contains advanced system configurations, including:► CPU Configuration► Chipset Configuration► Storage Configuration► Super IO Configuration► ACPI Configuration► USB Configuration► Trusted Computing► Instant Flash</td><td>Displays Hardware Status info, including:- Hardware Health Event Monitoring- CPU_FAN1 Setting- CHA_FAN1 Setting- Case Open Feature</td></tr><tr><td>Security</td><td>Boot</td><td>Exit</td></tr><tr><td>Changes or clears the supervisor/user password for the system- Supervisor Password- User Password► Secure Boot</td><td>Configures the boot settings and boot priority for available devices- Boot Option #1- Boot From Onboard LAN- Setup Prompt Timeout- Bootup Num-Lock- Full Screen Logo</td><td>Exits the UEFI Setup Utility while saving or discard the changes made- Save Changes and Exit- Discard Changes and Exit- Discard Changes- Load UEFI Defaults- Launch EFI Shell from filesystem device</td></tr></table>

#

# 6.2 Main

Upon entering the UEFI Setup Utility, the Main Menu is displayed, providing read-only information about your system and also allows you to set the System Date and Time. Refer to the screenshots and tables below for details of the submenus and settings.

<table><tr><td>Feature</td><td>Options</td></tr><tr><td>System Date</td><td>xxx mm/dd/yyyy</td></tr><tr><td>System Time</td><td>hh:mm:ss</td></tr><tr><td colspan="2">BIOS Information</td></tr><tr><td>UEFI Version</td><td>AmlTX-RL-WV x.xx.xx</td></tr><tr><td>Processor Type</td><td>Info only</td></tr><tr><td>Processor Speed</td><td>Info only</td></tr><tr><td>Cache Size</td><td>Info only</td></tr><tr><td colspan="2">Memory Information</td></tr><tr><td>Total Memory</td><td>Info only</td></tr><tr><td>DDR5_A1</td><td>Info only</td></tr><tr><td>DDR5_B1</td><td>Info only</td></tr><tr><td>LVDS Rom Version</td><td>Info only</td></tr></table>

# 6.3 Advanced

Contains the configurations for the following: CPU Configuration, Chipset Configuration, Storage Configuration, Super IO Configuration, ACPI Configuration, USB Configuration, and Trusted Computing.

<table><tr><td>Feature</td></tr><tr><td>▶ CPU Configuration</td></tr><tr><td>▶ Chipset Configuration</td></tr><tr><td>▶ Storage Configuration</td></tr><tr><td>▶ Super IO Configuration</td></tr><tr><td>▶ ACPI Configuration</td></tr><tr><td>▶ USB Configuration</td></tr><tr><td>▶ Trusted Computing</td></tr></table>

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>▶ Instant Flash</td><td>Instant Flash is a UEFI flash utility embedded in Flash ROM. This convenient UEFI update tool allows you to update system UEFI without entering operating systems first like MS-DOS or Windows®. Just launch this tool and save the new UEFI file to your USB flash drive, floppy disk or hard drive, and then you can update your UEFI in only a few clicks without preparing an additional floppy diskette or other com- plicated flash utility. Please note that the USB flash drive or hard drive must use FAT32/16/12 file system. If you execute Instant Flash utility, the utility will show the UEFI files and their respective information. Select the proper UEFI file to update your UEFI, and reboot your system after UEFI update process completes.</td></tr></table>

6.3.1 CPU Configuration

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Intel Hyper Threading Technology</td><td>Intel Hyper Threading Technology allows multiple threads to run on each core, improving the overall performance in threaded software.</td></tr><tr><td>Active Processor P-Cores</td><td>Select the number of cores to enable in each processor package.</td></tr><tr><td>Active Processor E-Cores</td><td>Select the number of E-Cores to enable in each processor package.</td></tr><tr><td>CPU C States Support</td><td>Enable CPU C States Support for power saving. It is recommended to keep C3, C6, and C7 all enabled for better power saving.</td></tr><tr><td>Enhanced Halt State (C1E)</td><td>The option allows you to enable Enhanced Halt State (C1E) for lower power consumption. Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Package C States Support</td><td>The option allows you to enable CPU, PCIe, Memory, Graphics C State Support for power saving.</td></tr><tr><td>CFG Lock</td><td>The option allows you to enable or disable the CFG Lock. Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Intel Virtualization Technology</td><td>When this option is set to [Enabled], a VMM (Virtual Machine Architecture) can utilize the additional hardware capabilities provided by Vanderpool Technology. This option will be hidden if the installed CPU does not support Intel Virtualization Technology.</td></tr><tr><td>Intel SpeedStep Technology</td><td>Intel SpeedStep technology is Intel&#x27;s new power saving technology. Processors can switch between multiple frequencies and voltage points to enable power saving. The default value is [Enabled]. Configuration options: [Enabled] and [Disabled]. If you install Windows® OS and want to enable this function, please set this item to [Enabled]. This item will be hidden if the current CPU does not support Intel SpeedStep technology. Please note that enabling this function may reduce CPU voltage and lead to system stability or compatibility issues with some power supplies. Please set this item to [Disabled] if above issues occur.</td></tr><tr><td>Intel Turbo Boost Technology</td><td>Use this item to enable or disable Intel Turbo Boost Mode Technology. Turbo Boost Mode allows processor cores to run faster than marked frequency in specific conditions. The default value is [Enabled].</td></tr><tr><td>CPU Thermal Throttling</td><td>You may select [Enabled] to enable CPU internal thermal control mechanism to keep the CPU from overheating.</td></tr></table>

6.3.2 Chipset Configuration

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Primary Graphics Adapter</td><td>This allows you to select [Onboard] or [PCI Express] as the boot graphic adapter priority. The default value is [PCI Express].</td></tr><tr><td>Above 4G Decoding</td><td>Enable or disable 64bit capable Devices to be decoded in Above 4G Address Space (only if the system supports 64-bit PCI decoding).</td></tr><tr><td>VT-d</td><td>Use this to enable or disable Intel® VT-d technology (Intel® Virtualization Technology for Directed I/O). The default value of this feature is [Disabled].</td></tr><tr><td>PCIE1 Bandwidth Mode</td><td>Select the bandwidth mode for PCIE1.</td></tr><tr><td>PCIE1 Link Speed</td><td>Select the link speed for PCIE1.</td></tr><tr><td>Share Memory</td><td>Configure the size of memory that is allocated to the integrated graphics processor when the system boots up.</td></tr><tr><td>IGPU Multi-Moniter</td><td>Select disable to disable the integrated graphics when an external graphics card is installed. Select enable to keep the integrated graphics enabled at all times.</td></tr><tr><td>Render Standby</td><td>Power down the render unit when the GPU is idle for lower power consumption.</td></tr><tr><td>Active LVDS</td><td>Use this to enable or disable the LVDS. The default value is [Disabled]. Set the item to [enable]. Then press &lt;F10&gt; to save the setting and restart the system. Now the default value of Active LVDS is changed to ENABLE (F9 load default is also set to ENABLE). Change the setting from [Enable] to [Disable], and then press &lt;F10&gt; to save the setting and restart the system. Likewise, the default value of Active LVDS is changed to DISABLE (F9 load default is also set to DISABLE).</td></tr><tr><td>Onboard LAN1</td><td>This allows you to enable or disable the Onboard LAN1 feature.</td></tr><tr><td>Onboard LAN2</td><td>This allows you to enable or disable the Onboard LAN2 feature.</td></tr><tr><td>Onboard HD Audio</td><td>Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio feature. If you select [Auto], the onboard HD Audio will be disabled when PCI Sound Card is plugged.</td></tr><tr><td>Deep Sleep</td><td>Mobile platforms support Deep S4/S5 in DC only and desktop platforms support Deep S4/S5 in AC only. The default value is [Disabled].</td></tr><tr><td>Restore on AC/Power Loss</td><td>Select the power state after a power failure. If [Power Off] is selected, the power will remain off when the power recovers. If [Power On] is selected, the system will start to boot up when the power recovers.</td></tr></table>

# 6.3.3 Storage Configuration

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>SATA Controller(s)</td><td>Use this item to enable or disable the SATA Controller feature.</td></tr><tr><td>SATA Mode Selection</td><td>Use this to select SATA mode. The default value is [AHCI Mode].AHCI (Advanced Host Controller Interface) supports NCQ and other new features that will improve SATA disk performance but IDE mode does not have these advantages.</td></tr><tr><td>Hybrid Storage Detection and Configuration Mode</td><td>Use this item to enable or disable Hybrid Storage Detection and Configuration Mode.</td></tr><tr><td>SATA Aggressive Link Power Management</td><td>Use this item to configure SATA Aggressive Link Power Management.</td></tr><tr><td>Hard Disk S.M.A.R.T.</td><td>Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) feature. Configuration options: [Disabled] and [Enabled].</td></tr></table>

6.3.4 Super IO Configuration

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>COM1 Configuration</td><td>Use this to set parameters of COM1.Type SelectUse this to select COM1 port type: [RS232], [RS422] or [RS485].</td></tr><tr><td>COM2 Configuration</td><td>Use this to set parameters of COM2.Type SelectUse this to select COM2 port type: [RS232], [RS422] or [RS485].</td></tr><tr><td>COM3 Configuration</td><td>Use this to set parameters of COM3.</td></tr><tr><td>COM4 Configuration</td><td>Use this to set parameters of COM4.</td></tr><tr><td>WDT Timeout Reset</td><td>Use this to set the Watch Dog Timer.</td></tr></table>

6.3.5 ACPI Configuration

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Suspend to RAM</td><td>Use this item to select whether to auto-detect or disable the Suspend-to-RAM feature. Select [Auto] will enable this feature if the OS supports it.</td></tr><tr><td>PCIE Devices Power On</td><td>Use this item to enable or disable PCIE devices to turn on the system from the power-soft-off mode.</td></tr><tr><td>RTC Alarm Power On</td><td>Use this item to enable or disable RTC (Real Time Clock) to power on the system.</td></tr></table>

6.3.6 USB Configuration

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>USB Power Control</td><td>Use this option to control USB power.</td></tr><tr><td>M.2 Key_B USB Function</td><td>The item enables or disables M.2 Key B USB function.</td></tr></table>

6.3.7 Trusted Computing

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Security Device Support</td><td>Security Device Support allows you to enable or disable BIOS support for security device.
O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available.
Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Active PCR banks</td><td>This item displays active PCR Banks.</td></tr><tr><td>Available PCR Banks</td><td>This item displays available PCR Banks.</td></tr><tr><td>SHA256 PCR Bank</td><td>SHA256 PCR Bank allows you to enable or disable SHA256 PCR Bank.
Configuration options: [Enabled] [Disabled]</td></tr><tr><td>SHA384 PCR Bank</td><td>SHA384 PCR Bank allows you to enable or disable SHA384 PCR Bank.
Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Pending Operation</td><td>Pending Operation allows you to schedule an Operation for the Security Device.
NOTE: Your computer will reboot during restart in order to change State of the Device.
Configuration options: [None] [TPM Clear]</td></tr><tr><td>Platform Hierarchy</td><td>This item allows you to enable or disable Platform Hierarchy.
Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Storage Hierarchy</td><td>This item allows you to enable or disable Storage Hierarchy.
Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Endorsement Hierarchy</td><td>This item allows you to enable or disable Endorsement Hierarchy.
Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Physical Presence Spec Version</td><td>Select this item to tell OS to support PPI spec version 1.2 or 1.3. Please note that some HCK tests might not support version 1.3.
Configuration options: [1.2] [1.3]</td></tr><tr><td>TPM 2.0 InterfaceType</td><td>This item allows you to view the Communication Interface to TPM 2.0 Device: CRB or TIS.</td></tr><tr><td>Device Select</td><td>This item allows you to select the TPM device to be supported.
[TPM 1.2] restricts support to TPM 1.2 devices.
[TPM 2.0] restricts support to TPM 2.0 devices.
[Auto] supports both TPM 1.2 and TPM 2.0 devices with the default set to TPM 2.0 de- vices. If TPM 2.0 devices are not found, TPM 1.2 devices will be enumerated.</td></tr><tr><td>Onboard TPM</td><td>The option enables or disables Intel PTT in ME. Disable this option to Use discrete TPM Module.</td></tr></table>

# 6.4 HW Monitor

This screen allows you to monitor the status of your system and installed devices, such as CPU temperature, motherboard temperature, CPU fan speed, chassis fan speed, and the critical voltage.

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>CPU_Fan 1 Setting</td><td>This item allows you to select a fan mode for CPU Fan 1. The default value is [Full On].Configuration options: [Full On] [Automatic Mode]</td></tr><tr><td>CHA_Fan 1 Setting</td><td>This allows you to set chassis fan 1’s speed. The default value is [Full On].Configuration options: [Full On] [Automatic Mode]</td></tr><tr><td>Case Open Feature</td><td>This item allows you to enable or disable case open detection feature.The default is value [Disabled].</td></tr><tr><td>Clear Status</td><td>This option appears only when the case open has been detected. Use this option to keep or clear the record of previous chassis intrusion status.</td></tr></table>

# 6.5 Security

The Security Screen lets you change or clear the supervisor / user passwords for the system.

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Supervisor Password</td><td>Set or change the password for the administrator account. Only the administrator has the authority to change the settings in the UEFI Setup Utility. Leave it blank and press enter to remove the password.</td></tr><tr><td>User Password</td><td>Set or change the password for the user account. Users are unable to change the settings in the UEFI Setup Utility. Leave it blank and press enter to remove the password.</td></tr><tr><td>Secure Boot</td><td>Press [Enter] to configure the Secure Boot Settings. The feature protects the system from unauthorized access and malwares during POST.</td></tr><tr><td>Secure Boot Mode</td><td>[Standard] Select this item and the system will automatically load the Secure Boot keys from the BIOS database.[Custom] Select this item and Secure Boot Policy variables can be configured by a physically present user without full authentication.</td></tr><tr><td>Install Default Secure Boot Keys</td><td>Please install default secure boot keys if it's the first time you use secure boot.</td></tr><tr><td>Clear Secure Boot Keys</td><td>This item appears only when you load the default Secure Boot keys. Use this item to clear all default Secure Boot keys.</td></tr><tr><td>Key Management</td><td>This item enables expert users to modify Secure Boot Policy variables without full authentication.This appears only when you set Secure Boot Mode to [Custom].</td></tr></table>

# 6.6 Boot

This section displays the available devices on your system for you to configure the boot priority and settings.

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Boot From Onboard LAN</td><td>The item allows the system to be waked up by the onboard LAN.Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Setup Prompt Timeout</td><td>The item allows you to configures the number of seconds to wait for the UEFI setup utility.Configuration options: [1] - [65535]</td></tr><tr><td>Bootup Num-Lock</td><td>The item allows you to select whether Num Lock should be turned on or off when the system boots up.Configuration options: [On] [Off]</td></tr><tr><td>Full Screen Logo</td><td>[Enabled] Select this item to display the boot logo.[Disabled] Select this item to show normal POST messages.</td></tr></table>

6.7 Exit

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Save Changes and Exit</td><td>When you select this option, the following message “Save configuration changes and exit setup?” will pop out. Select [Yes] to save the changes and exit the UEFI SETUP UTILITY.</td></tr><tr><td>Discard Changes and Exit</td><td>When you select this option, the following message “Discard changes and exit setup?” will pop out. Select [Yes] to exit the UEFI SETUP UTILITY without saving any changes.</td></tr><tr><td>Discard Changes</td><td>When you select this option, the following message “Discard changes?” will pop out. Select [Yes] to discard all the changes.</td></tr><tr><td>Load UEFI Defaults</td><td>The item allows you to load UEFI default values for all options. The F9 key can be used for this operation.</td></tr><tr><td>Launch EFI Shell from filesystem device</td><td>The item allows you to copy shellx64.efi to the root directory to launch EFI Shell.</td></tr></table>

# Safety Instructions

Read and follow all instructions marked on the product and in the documentation before you operate your system. Retain all safety and operating instructions for future use.

• Please read these safety instructions carefully.
• Please keep this User‘s Manual for later reference.
• Read the specifications section of this manual for detailed information on the operating environment of this equipment.
• When installing/mounting or uninstalling/removing equipment, turn off the power and unplug any power cords/cables.
• To avoid electrical shock and/or damage to equipment:

 Keep equipment away from water or liquid sources.
 Keep equipment away from high heat or high humidity.
 Keep equipment properly ventilated (do not block or cover ventilation openings).
 Make sure to use recommended voltage and power source settings.
 Always install and operate equipment near an easily accessible electrical socket-outlet.
 Secure the power cord (do not place any object on/over the power cord).
 Only install/attach and operate equipment on stable surfaces and/or recommended mountings.
 If the equipment will not be used for long periods of time, turn off and unplug the equipment from its power source.

• Never attempt to fix the equipment. Equipment should only be serviced by qualified personnel.

# Getting Services

Ask an Expert: https://www.adlinktech.com/en/Askanexpert

# ADLINK Technology, Inc.

<table><tr><td>Address:</td><td>No. 66, Huaya 1st Road, Guishan DistrictTaoyuan City 333, Taiwan</td></tr><tr><td>Tel:</td><td>+886-3-216-5088</td></tr><tr><td>Fax:</td><td>+886-3-328-5723</td></tr><tr><td>Email:</td><td>service@adlinktech.com</td></tr></table>

# Ampro ADLINK Technology, Inc.

Address: 6450 Via Del Oro, San Jose, CA 95119-1208, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

Fax: +1-408-600-1189

Email: info@adlinktech.com

# ADLINK Technology (China) Co., Ltd.

<table><tr><td>Address:</td><td>300 Fang Chun Rd., Zhangjiang Hi-Tech Park, Pudong New Area Shanghai, 201203 China</td></tr><tr><td>Tel:</td><td>+86-21-5132-8988</td></tr><tr><td>Fax:</td><td>+86-21-5132-3588</td></tr><tr><td>Email:</td><td>market@adlinktech.com</td></tr></table>

# ADLINK Technology GmbH

<table><tr><td>Address:</td><td>Hans-Thoma-Strasse 8-10, 68163 Mannheim, Germany</td></tr><tr><td>Tel:</td><td>+49-621-43214-0</td></tr><tr><td>Fax:</td><td>+49-621 43214-30</td></tr><tr><td>Email:</td><td>emea@adlinktech.com</td></tr></table>

Please visit the Contact page at www.adlinktech.com for information on how to contact the ADLINK regional office nearest you.
[🔗 Link to the original document](.amitx-rl-wv-50m-16008-2010-11/amitx-rl-wv-50m-16008-2010-11.pdf)