# NuIPC®

# cPCI-8602

6U CompactPCI Single Slot 64-bit/66MHz Hot Swappable Dual PMC Slot Carrier Board

User’s Guide

Copyright 2004 ADLINK TECHNOLOGY INC.

All Rights Reserved.

Manual Rev. 1.1: May 29, 2004

Part No: 50-15023-101

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

# Trademarks

NuIPC, cPCI-8602 are registered trademarks of ADLINK TECHNOLOGY INC.

Other product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

# Getting Service from ADLINK

Customer Satisfaction is top priority for ADLINK TECHNOLOGY INC. If you need any help or service, please contact us.

<table><tr><td colspan="4">ADLINK TECHNOLOGY INC.</td></tr><tr><td>Web Site</td><td colspan="3">http://www.adlinktech.com</td></tr><tr><td>Sales &amp; Service</td><td colspan="3">Service@adlinktech.com</td></tr><tr><td>TEL</td><td>+886-2-82265877</td><td>FAX</td><td>+886-2-82265717</td></tr><tr><td>Address</td><td colspan="3">9F, No. 166, Jian Yi Road, Chungho City, Taipei, 235 Taiwan</td></tr></table>

Please email or FAX your detailed information for prompt, satisfactory, and consistent service.

<table><tr><td colspan="4">Detailed Company Information</td></tr><tr><td>Company/Organization</td><td colspan="3"></td></tr><tr><td>Contact Person</td><td colspan="3"></td></tr><tr><td>E-mail Address</td><td colspan="3"></td></tr><tr><td>Address</td><td colspan="3"></td></tr><tr><td>Country</td><td colspan="3"></td></tr><tr><td>TEL</td><td></td><td>FAX</td><td></td></tr><tr><td>Web Site</td><td colspan="3"></td></tr><tr><td colspan="4">Questions</td></tr><tr><td>Product Model</td><td colspan="3"></td></tr><tr><td>Environment</td><td colspan="3">OS:Computer Brand:M/B: CPU:Chipset: BIOS:Video Card:NIC:Other:</td></tr><tr><td>Detail Description</td><td colspan="3"></td></tr><tr><td>Suggestions for ADLINK</td><td colspan="3"></td></tr></table>

# Table of Contents

# Chapter 1 Introduction .........

1.1 Features . .. 2
1.2 Specifications ..... . 3

# Chapter 2 Getting Started ........ 5

2.1 What’s Included.. . 5
2.2 Unpacking ... 6
2.3 cPCI-8602 Layout.. 7
2.4 Voltage Selection . 8
2.5 Functional Block Diagram . 9
2.6 Pinouts... . 10

# Chapter 3 Installation ......... ..... 19

3.1 PMC Board Installation... .. 19

# Warranty Policy ........ ..... 21

# How to Use This Guide

This manual is designed to assist users in understanding the cPCI-8602 and describes how to modify settings to meet specific application requirements.

# Chapter 1 Introduction

Overview of product features, applications, and specifications.

# Chapter 2 Getting Started

Describes unpacking and illustrates connector pin assignments.

# Chapter 3 Installation

Describes setup and installation.

![1](.cpci-8602-manual-4/2377958dcfcf44e4b1134973b49e0373f40f27911d288ac3b929801953fb0821.jpg)

# Introduction

The cPCI-8602 6U CompactPCI single slot 64-bit hot swappable dual PMC carrier board offers the flexibility required by most I/O applications. The cPCI-8602 is designed in accordance to PICMG 2.0 R3.0 and PICMG 2.1 R2.0 specifications. Its 6U cPCI design only occupies one system slot and accepts two single-sized PMC modules or one double-sized PMC module. The 64- bit/66MHz PCI R2.1-compliant bus ensures efficient cPCI communication with either 3.3V or 5V PMC modules. Rear I/O PMC modules are also supported through an optional cPCI rear I/O transition module.

The on-board transparent PCI-to-PCI bridge supplies the additional dual PMC slots without the hassles of PCI bus mastering. This bridge also supports a 32-bit/64-bit CompactPCI bus and 33/66MHz PMC cards.

An ELMA handle and hot-swappable functionality guarantee easy installation and removal. The cPCI-8602 ground is isolated to prevent signal noise from the chassis.

# 1.1 Features

• PICMG 2.0 CompactPCI Specification R3.0 Compliant
• PICMG 2.1 CompactPCI Hot Swap Specification R2.0 Compliant (optional)
6U cPCI form factor, 1-slot (4TE/HP) width
Design for one dual-size or two single-size PMC modules
Optional cPCI rear I/O transition module support for rear I/O PMC modules
• 64-bit/66MHz PCI bus for both cPCI and PMC slots
Supports universal (3.3V and 5V) voltage CompactPCI boards and PMC module (default is 5V)

# 1.2 Specifications

# General CompactPCI Features

PCI Rev.2.1 compliant
• PICMG 2.0 CompactPCI R3.0 compliant
• PICMG 2.1 CompactPCI Hot-Swap specification R2.0 compliant (optional)
• PICMG 2.3 PMC I/O on CompactPCI specification R1.0 compliant

# Form Factor

Standard 6U CompactPCI (board size: 233.35mm x 160mm)
Single slot (4TE/HP, 20.32mm)

# PCI Bus Bridge

Intel 21154 transparent PCI to PCI bridge (or equivalent)
Supports on-board dual PMC slots with PCI bus mastering
Supports 32-bit/64-bit PCI data/address lines for CompactPCI bus and PMC slots with 33/66MHz PCI clocking
• Full hot-swap support

# PMC Slots

Supports IEEE P1386.1 standard PMC (PCI Mezzanine Card) module
• Designed for one dual-size or two single-size PMC modules
• All on-board PMC slots are PCI bus mastered
Supports 32-bit/64-bit PCI data/address lines with 33/66MHz PCI clocking
• Supports 3.3V, 5V, and universal voltage PMC modules (default is 5V)
Optional PMC1 J14/P14 connects to CompactPCI J3 for rear I/O (Reserved)
Optional PMC2 J24/P24 connects to CompactPCI J5 for rear I/O (Reserved)

# Front Panel LEDs

• Power status (green LED)
• Hot-swap status indicator (blue LED)

# Other

Chassis GND is isolated from digital ground on carrier board
• ELMA handle with hot-swap micro-switch
• New Rittal EMC spring prevents EMC spring damage

# 2

# Getting Started

This chapter describes how to prepare the cPCI-8602 for installation. Please carefully review the unpacking information before removing the product. Optional settings are also specified below.

# 2.1 What’s Included

In addition to this User's Manual, the package includes the following item:

• cPCI-8602 Dual PMC Slot Carrier Board

If anything is missing or damaged, contact the dealer the product was purchased. Save the shipping materials and carton to ship or store the product in the future.

# 2.2 Unpacking

The cPCI-8602 contains sensitive electronic components that can be easily damaged by static electricity.

Prepare a grounded anti-static mat. The operator should be wearing an antistatic wristband, grounded at the same point as the anti-static mat.

Inspect the card module carton for obvious damage. Shipping and handling may cause damage to the module. Be sure there is no obvious damage due to shipping and handing by examining the shipping box.

After opening the card module carton, extract the system module and place it only on a grounded anti-static surface, component side up.

Note: DO NOT APPLY POWER TO THE CARD IF IT HAS BEEN DAMAGED.

# 2.3 cPCI-8602 Layout

![PMC2\nPMC1\nADLINK\nADLINK\nPCL-800\n5V\nCOM](.cpci-8602-manual-4/0b4aac523b3d11026642c673976f4988e5ea887c74a077e4d58791e6817d7267.jpg)

Figure 2.1 cPCI-6802 Layout

# 2.4 Voltage Selection

The cPCI-8602 supports both 3.3V and 5.0V PMC modules. The factory default setting is 5V. To change to 3.3V, change the mini-jumper position of JPY1 from pin2-3 to pin1-2.

![Green printed circuit board with visible component labels and annotations, including a red arrow pointing to a specific area.](.cpci-8602-manual-4/57940fc288b6cfd81ed3c726707fe29dbf2bc38e54ccb60153d7eb4f41bf8f49.jpg)

JPY1Jumper Setting : The mini-jumper of JPY1 is used to set the PMC VIO to 3.3V or 5V (Default)

<table><tr><td>Status</td><td>JPY1</td></tr><tr><td>PMC VIO set to 3.3V</td><td>&lt;img src="images/ad093f8030ede4ac56363714e91a35ec0e391d5e8085b6230547f7a59a8fe22e.jpg"/&gt;</td></tr><tr><td>PMC VIO set to 5V (Default)</td><td>&lt;img src="images/950066c5b2648bbd7efa2fb62451c0a4bb73c55185132a1c95f19cf935f169ef.jpg"/&gt;</td></tr></table>

# 2.5 Functional Block Diagram

![Based on the provided flowchart/block diagram, here is the accurate description:\n\n**Labeled Blocks:**\n*   J5\n*   PMC2\n*   J3\n*   PMC1\n*   J2\n*   Hot Swap Control\n*   J1\n*   Bridge\n\n**Connections:**\n*   **J5 and PMC2:** Connected bidirectionally (arrows point in both directions).\n*   **PMC2 and Hot Swap Control:** Connected unidirectionally from Hot Swap Control to PMC2 (arrow points to PMC2).\n*   **PMC1 and J3:** Connected bidirectionally (arrows point in both directions).\n*   **PMC1 and J2:** Connected bidirectionally (arrows point in both directions).\n*   **PMC1 and Hot Swap Control:** Connected unidirectionally from Hot Swap Control to PMC1 (arrow points to PMC1).\n*   **Bridge and J1:** Connected bidirectionally (arrows point in both directions).\n*   **Bridge and Hot Swap Control:** Connected bidirectionally (arrows point in both directions).](.cpci-8602-manual-4/c5e198e46acc79ab427e662453080b7b49eab90796d3cfc35f0d7fb8b6f7a47e.jpg)

Figure 2.2 cPCI-6802 Functional Layout
Note: J3 and J5 are reserved.

# 2.6 Pinouts

CompactPCI J3 Pin Assignments (Reserved)

<table><tr><td></td><td>ROW A</td><td>ROW B</td><td>ROW C</td><td>ROW D</td><td>ROW E</td><td></td></tr><tr><td>14</td><td>+3.3V</td><td>+3.3V</td><td>+3.3V</td><td>+5V</td><td>+5V</td><td>14</td></tr><tr><td>13</td><td>PMC11O5</td><td>PMC11O4</td><td>PMC11O3</td><td>PMC11O2</td><td>PMC11O1</td><td>13</td></tr><tr><td>12</td><td>PMC11O10</td><td>PMC11O9</td><td>PMC11O8</td><td>PMC11O7</td><td>PMC11O6</td><td>12</td></tr><tr><td>11</td><td>PMC11O15</td><td>PMC11O14</td><td>PMC11O13</td><td>PMC11O12</td><td>PMC11O11</td><td>11</td></tr><tr><td>10</td><td>PMC11O20</td><td>PMC11O19</td><td>PMC11O18</td><td>PMC11O17</td><td>PMC11O16</td><td>10</td></tr><tr><td>9</td><td>PMC11O25</td><td>PMC11O24</td><td>PMC11O23</td><td>PMC11O22</td><td>PMC11O21</td><td>9</td></tr><tr><td>8</td><td>PMC11O30</td><td>PMC11O29</td><td>PMC11O28</td><td>PMC11O27</td><td>PMC11O26</td><td>8</td></tr><tr><td>7</td><td>PMC11O35</td><td>PMC11O34</td><td>PMC11O33</td><td>PMC11O32</td><td>PMC11O31</td><td>7</td></tr><tr><td>6</td><td>PMC11O40</td><td>PMC11O39</td><td>PMC11O38</td><td>PMC11O37</td><td>PMC11O36</td><td>6</td></tr><tr><td>5</td><td>PMC11O45</td><td>PMC11O44</td><td>PMC11O43</td><td>PMC11O42</td><td>PMC11O41</td><td>5</td></tr><tr><td>4</td><td>PMC11O50</td><td>PMC11O49</td><td>PMC11O48</td><td>PMC11O47</td><td>PMC11O46</td><td>4</td></tr><tr><td>3</td><td>PMC11O55</td><td>PMC11O54</td><td>PMC11O53</td><td>PMC11O52</td><td>PMC11O51</td><td>3</td></tr><tr><td>2</td><td>PMC11O60</td><td>PMC11O59</td><td>PMC11O58</td><td>PMC11O57</td><td>PMC11O56</td><td>2</td></tr><tr><td>1</td><td>V(I/O)</td><td>PMC11O64</td><td>PMC11O63</td><td>PMC11O62</td><td>PMC11O61</td><td>1</td></tr></table>

# Notes:

1. PMC1IO\* signals are connected to the lower PMC Slot (i.e. Slot 1).
2. Pins in J3 columns 15 through 19 are not connected (NC).
3. V(I/O) default is 5V and is controlled by JPY1. However, 3.3 V is available as a factory option (see Section 2.4).

CompactPCI J5 Pin Assignments (Reserved)

<table><tr><td></td><td>ROW A</td><td>ROW B</td><td>ROW C</td><td>ROW D</td><td>ROW E</td><td></td></tr><tr><td>13</td><td>PMC2IO5</td><td>PMC2IO4</td><td>PMC2IO3</td><td>PMC2IO2</td><td>PMC2IO1</td><td>13</td></tr><tr><td>12</td><td>PMC2IO10</td><td>PMC2IO9</td><td>PMC2IO8</td><td>PMC2IO7</td><td>PMC2IO6</td><td>12</td></tr><tr><td>11</td><td>PMC2IO15</td><td>PMC2IO14</td><td>PMC2IO13</td><td>PMC2IO12</td><td>PMC2IO11</td><td>11</td></tr><tr><td>10</td><td>PMC2IO20</td><td>PMC2IO19</td><td>PMC2IO18</td><td>PMC2IO17</td><td>PMC2IO16</td><td>10</td></tr><tr><td>9</td><td>PMC2IO25</td><td>PMC2IO24</td><td>PMC2IO23</td><td>PMC2IO22</td><td>PMC2IO21</td><td>9</td></tr><tr><td>8</td><td>PMC2IO30</td><td>PMC2IO29</td><td>PMC2IO28</td><td>PMC2IO27</td><td>PMC2IO26</td><td>8</td></tr><tr><td>7</td><td>PMC2IO35</td><td>PMC2IO34</td><td>PMC2IO33</td><td>PMC2IO32</td><td>PMC2IO31</td><td>7</td></tr><tr><td>6</td><td>PMC2IO40</td><td>PMC2IO39</td><td>PMC2IO38</td><td>PMC2IO37</td><td>PMC2IO36</td><td>6</td></tr><tr><td>5</td><td>PMC2IO45</td><td>PMC2IO44</td><td>PMC2IO43</td><td>PMC2IO42</td><td>PMC2IO41</td><td>5</td></tr><tr><td>4</td><td>PMC2IO50</td><td>PMC2IO49</td><td>PMC2IO48</td><td>PMC2IO47</td><td>PMC2IO46</td><td>4</td></tr><tr><td>3</td><td>PMC2IO55</td><td>PMC2IO54</td><td>PMC2IO53</td><td>PMC2IO52</td><td>PMC2IO51</td><td>3</td></tr><tr><td>2</td><td>PMC2IO60</td><td>PMC2IO59</td><td>PMC2IO58</td><td>PMC2IO57</td><td>PMC2IO56</td><td>2</td></tr><tr><td>1</td><td>(NC)</td><td>PMC2IO64</td><td>PMC2IO63</td><td>PMC2IO62</td><td>PMC2IO61</td><td>1</td></tr></table>

# Notes:

1. PMC2IO\* signals are connected to the upper PMC slot (i.e. Slot 2).
2. Pins in J5 columns 14 through 22 are not connected (NC).
3. Pin A1 is active low on some transition modules to indicate the module is present (TMPRSNT\_L).

# PMC slot pin assignments

J11 & J21 32-bit PCI

<table><tr><td>Pin#</td><td>Signal Name</td><td>Signal Name</td><td>Pin #</td></tr><tr><td>1</td><td>TCK</td><td>-12V</td><td>2</td></tr><tr><td>3</td><td>GND</td><td>INTA#</td><td>4</td></tr><tr><td>5</td><td>INTB#</td><td>INTC#</td><td>6</td></tr><tr><td>7</td><td>BUSMODE1#</td><td>+5V</td><td>8</td></tr><tr><td>9</td><td>INTD#</td><td>PCI-RSVD</td><td>10</td></tr><tr><td>11</td><td>GND</td><td>3.3VAUX (NC)</td><td>12</td></tr><tr><td>13</td><td>CLK</td><td>GND</td><td>14</td></tr><tr><td>15</td><td>GND</td><td>GNT#</td><td>16</td></tr><tr><td>17</td><td>REQ#</td><td>+5V</td><td>18</td></tr><tr><td>19</td><td>V(I/O)</td><td>AD[3 1]</td><td>20</td></tr><tr><td>21</td><td>AD[28]</td><td>AD[27]</td><td>22</td></tr><tr><td>23</td><td>AD[25]</td><td>GND</td><td>24</td></tr><tr><td>25</td><td>GND</td><td>C/BE[3]#</td><td>26</td></tr><tr><td>27</td><td>AD[22]</td><td>AD[2 1]</td><td>28</td></tr><tr><td>29</td><td>AD[19]</td><td>+5V</td><td>30</td></tr><tr><td>31</td><td>V(I/O)</td><td>AD[17]</td><td>32</td></tr><tr><td>33</td><td>FRAME#</td><td>GND</td><td>34</td></tr><tr><td>35</td><td>GND</td><td>IRDY#</td><td>36</td></tr><tr><td>37</td><td>DEVSEL#</td><td>+5V</td><td>38</td></tr><tr><td>39</td><td>GND</td><td>LOCK#</td><td>40</td></tr><tr><td>41</td><td>PCI-RSVD*</td><td>PCI-RSVD*</td><td>42</td></tr><tr><td>43</td><td>PAR</td><td>GND</td><td>44</td></tr><tr><td>45</td><td>V(I/O)</td><td>AD[15]</td><td>46</td></tr><tr><td>47</td><td>AD[12]</td><td>AD[11]</td><td>48</td></tr><tr><td>49</td><td>AD[09]</td><td>+5V</td><td>50</td></tr><tr><td>51</td><td>GND</td><td>C/BE[0]#</td><td>52</td></tr><tr><td>53</td><td>AD[06]</td><td>AD[05]</td><td>54</td></tr><tr><td>55</td><td>AD[04]</td><td>GND</td><td>56</td></tr><tr><td>57</td><td>V(I/O)</td><td>AD[03]</td><td>58</td></tr><tr><td>59</td><td>AD[02]</td><td>AD[01]</td><td>60</td></tr><tr><td>61</td><td>AD[00]</td><td>+5V</td><td>62</td></tr><tr><td>63</td><td>GND</td><td>REQ64#</td><td>64</td></tr></table>

J12 & J22 32-bit PCI

<table><tr><td>Pin#</td><td>Signal Name</td><td>Signal Name</td><td>Pin #</td></tr><tr><td>1</td><td>+12V</td><td>TRST#</td><td>2</td></tr><tr><td>3</td><td>TMS</td><td>TDO</td><td>4</td></tr><tr><td>5</td><td>TDI</td><td>GND</td><td>6</td></tr><tr><td>7</td><td>GND</td><td>PCI-RSVD</td><td>8</td></tr><tr><td>9</td><td>PCI-RSVD</td><td>PCI-RSVD</td><td>10</td></tr><tr><td>11</td><td>BUSMODE2#</td><td>+3.3V</td><td>12</td></tr><tr><td>13</td><td>RST#</td><td>BUSMODE3#</td><td>14</td></tr><tr><td>15</td><td>+3.3V</td><td>BUSMODE4#</td><td>16</td></tr><tr><td>17</td><td>PME# (NC)</td><td>GND</td><td>18</td></tr><tr><td>19</td><td>AD[30]</td><td>AD[29]</td><td>20</td></tr><tr><td>21</td><td>GND</td><td>AD[26]</td><td>22</td></tr><tr><td>23</td><td>AD[24]</td><td>+3.3V</td><td>24</td></tr><tr><td>25</td><td>IDSEL</td><td>AD[23]</td><td>26</td></tr><tr><td>27</td><td>+3.3V</td><td>AD[20]</td><td>28</td></tr><tr><td>29</td><td>AD[18]</td><td>GND</td><td>30</td></tr><tr><td>31</td><td>AD[16]</td><td>C/BE[2]#</td><td>32</td></tr><tr><td>33</td><td>GND</td><td>PMC-RSVD</td><td>34</td></tr><tr><td>35</td><td>TRDY#</td><td>+3.3V</td><td>36</td></tr><tr><td>37</td><td>GND</td><td>STOP#</td><td>38</td></tr><tr><td>39</td><td>PERR#</td><td>GND</td><td>40</td></tr><tr><td>41</td><td>+3.3V</td><td>SERR#</td><td>42</td></tr><tr><td>43</td><td>C/BE[1]#</td><td>GND</td><td>44</td></tr><tr><td>45</td><td>AD[14]</td><td>AD[13]</td><td>46</td></tr><tr><td>47</td><td>M66EN*</td><td>AD[10]</td><td>48</td></tr><tr><td>49</td><td>AD[08]</td><td>+3.3V</td><td>50</td></tr><tr><td>51</td><td>AD[07]</td><td>PMC-RSVD</td><td>52</td></tr><tr><td>53</td><td>+3.3V</td><td>PMC-RSVD</td><td>54</td></tr><tr><td>55</td><td>PMC-RSVD</td><td>GND</td><td>56</td></tr><tr><td>57</td><td>PMC-RSVD</td><td>PMC-RSVD</td><td>58</td></tr><tr><td>59</td><td>GND</td><td>PMC-RSVD</td><td>60</td></tr><tr><td>61</td><td>ACK64#</td><td>+3.3V</td><td>62</td></tr><tr><td>63</td><td>GND</td><td>PMC-RSVD</td><td>64</td></tr></table>

J13 & J23 64-bit PCI Extension

<table><tr><td>Pin#</td><td>Signal Name</td><td>Signal Name</td><td>Pin #</td></tr><tr><td>37</td><td>AD45</td><td>GND</td><td>38</td></tr><tr><td>39</td><td>V(I/O)</td><td>AD44</td><td>40</td></tr><tr><td>41</td><td>AD43</td><td>AD42</td><td>42</td></tr><tr><td>43</td><td>AD41</td><td>GND</td><td>44</td></tr><tr><td>45</td><td>GND</td><td>AD40</td><td>46</td></tr><tr><td>47</td><td>AD39</td><td>AD38</td><td>48</td></tr><tr><td>49</td><td>AD37</td><td>GND</td><td>50</td></tr><tr><td>51</td><td>GND</td><td>AD36</td><td>52</td></tr><tr><td>53</td><td>AD35</td><td>AD34</td><td>54</td></tr><tr><td>55</td><td>AD33</td><td>GND</td><td>56</td></tr><tr><td>57</td><td>V(I/O)</td><td>AD32</td><td>58</td></tr><tr><td>59</td><td>PCI-RSVD</td><td>PCI-RSVD</td><td>60</td></tr><tr><td>61</td><td>PCI-RSVD</td><td>GND</td><td>62</td></tr><tr><td>63</td><td>GND</td><td>PCI-RSVD</td><td>64</td></tr><tr><td>1</td><td>PCI-RSVD</td><td>GND</td><td>2</td></tr><tr><td>3</td><td>GND</td><td>C/BE7#</td><td>4</td></tr><tr><td>5</td><td>C/BE6#</td><td>C/BE5#</td><td>6</td></tr><tr><td>7</td><td>C/BE4#</td><td>GND</td><td>8</td></tr><tr><td>9</td><td>V(I/O)</td><td>PAR64</td><td>10</td></tr><tr><td>11</td><td>AD63</td><td>AD62</td><td>12</td></tr><tr><td>13</td><td>AD61</td><td>GND</td><td>14</td></tr><tr><td>15</td><td>GND</td><td>AD60</td><td>16</td></tr><tr><td>17</td><td>AD59</td><td>AD58</td><td>18</td></tr><tr><td>19</td><td>AD57</td><td>GND</td><td>20</td></tr><tr><td>21</td><td>V(I/O)</td><td>AD56</td><td>22</td></tr><tr><td>23</td><td>AD55</td><td>AD54</td><td>24</td></tr><tr><td>25</td><td>AD53</td><td>GND</td><td>26</td></tr><tr><td>27</td><td>GND</td><td>AD52</td><td>28</td></tr><tr><td>29</td><td>AD51</td><td>AD50</td><td>30</td></tr><tr><td>31</td><td>AD49</td><td>GND</td><td>32</td></tr><tr><td>33</td><td>GND</td><td>AD48</td><td>34</td></tr><tr><td>35</td><td>AD47</td><td>AD46</td><td>36</td></tr></table>

J14 & J24 User defined I/O (for rear I/O)

<table><tr><td>Pin#</td><td>Signal Name</td><td>Signal Name</td><td>Pin #</td></tr><tr><td>1</td><td>I/O</td><td>I/O</td><td>2</td></tr><tr><td>3</td><td>I/O</td><td>I/O</td><td>4</td></tr><tr><td>5</td><td>I/O</td><td>I/O</td><td>6</td></tr><tr><td>7</td><td>I/O</td><td>I/O</td><td>8</td></tr><tr><td>9</td><td>I/O</td><td>I/O</td><td>10</td></tr><tr><td>11</td><td>I/O</td><td>I/O</td><td>12</td></tr><tr><td>13</td><td>I/O</td><td>I/O</td><td>14</td></tr><tr><td>15</td><td>I/O</td><td>I/O</td><td>16</td></tr><tr><td>17</td><td>I/O</td><td>I/O</td><td>18</td></tr><tr><td>19</td><td>I/O</td><td>I/O</td><td>20</td></tr><tr><td>21</td><td>I/O</td><td>I/O</td><td>22</td></tr><tr><td>23</td><td>I/O</td><td>I/O</td><td>24</td></tr><tr><td>25</td><td>I/O</td><td>I/O</td><td>26</td></tr><tr><td>27</td><td>I/O</td><td>I/O</td><td>28</td></tr><tr><td>29</td><td>I/O</td><td>I/O</td><td>30</td></tr><tr><td>31</td><td>I/O</td><td>I/O</td><td>32</td></tr><tr><td>33</td><td>I/O</td><td>I/O</td><td>34</td></tr><tr><td>35</td><td>I/O</td><td>I/O</td><td>36</td></tr><tr><td>37</td><td>I/O</td><td>I/O</td><td>38</td></tr><tr><td>39</td><td>I/O</td><td>I/O</td><td>40</td></tr><tr><td>41</td><td>I/O</td><td>I/O</td><td>42</td></tr><tr><td>43</td><td>I/O</td><td>I/O</td><td>44</td></tr><tr><td>45</td><td>I/O</td><td>I/O</td><td>46</td></tr><tr><td>47</td><td>I/O</td><td>I/O</td><td>48</td></tr><tr><td>49</td><td>I/O</td><td>I/O</td><td>50</td></tr><tr><td>51</td><td>I/O</td><td>I/O</td><td>52</td></tr><tr><td>53</td><td>I/O</td><td>I/O</td><td>54</td></tr><tr><td>55</td><td>I/O</td><td>I/O</td><td>56</td></tr><tr><td>57</td><td>I/O</td><td>I/O</td><td>58</td></tr><tr><td>59</td><td>I/O</td><td>I/O</td><td>60</td></tr><tr><td>61</td><td>I/O</td><td>I/O</td><td>62</td></tr><tr><td>63</td><td>I/O</td><td>I/O</td><td>64</td></tr></table>

3

# Installation

# 3.1 PMC Board Installation

Insert the face of the PMC module into the front of the cPCI-8602 carrier board. Carefully align the PMC connector to the carrier board and firmly place it in the slot. Secure the module to the carrier board with screws.

![J21\nJ22\nJ23\nJ24\nJ11\nJ12\nJ13\nJ14\nSingle Width\nPMC Module](.cpci-8602-manual-4/cf3f3bb2764554d608de7b08ae658055fba9560777584888cc0b675d51f8e167.jpg)

Figure 3.1 PMC Module Installation
Note: Ensure that the PMC module(s) are properly installed before connecting the cPCI-6802 carrier board to the system.

# Warranty Policy

Thank you for choosing ADLINK. To understand your rights and enjoy all the after-sales services we offer, please read the following carefully:

1. Before using ADLINK’s products please read the user manual and follow the instructions exactly.
2. When sending in damaged products for repair, please attach an RMA application form.
3. All ADLINK products come with a two-year guarantee, repaired free of charge.

The warranty period starts from the product’s shipment date from ADLINK’s factory.
Peripherals and third-party products not manufactured by ADLINK will be covered by the original manufacturers’ warranty.
End users requiring maintenance services should contact their local dealers. Local warranty conditions will depend on local dealers.

4. This warranty will not cover repair costs due to:

Damage caused by not following instructions.
Damage caused by carelessness on the users’ part during product transportation.
Damage caused by fire, earthquakes, floods, lightening, pollution, other acts of God, and/or incorrect usage of voltage transformers.
Damage caused by unsuitable storage environments (i.e. high temperatures, high humidity, or volatile chemicals.
Damage caused by leakage of battery fluid.
Damage from improper repair by unauthorized technicians.
• Products with altered and/or damaged serial numbers.
Other categories not protected under our guarantees.

5. Customers are responsible for shipping costs to transport damaged products to our company or sales office.

6. To ensure the speed and quality of product repair, please download a RMA application form from our company website: www.adlinktech.com. Damaged products with attached RMA forms receive priority.

For further questions, please contact our FAE staff.

ADLINK: service@adlinktech.com
[🔗 Link to the original document](.cpci-8602-manual-4/cpci-8602-manual-4.pdf)