# DEX-100

# Data Extraction System

# User’s Manual

![U3 U2 U1\nCOM1\nBD DP\nCOM2\nADLINK\nMPC\nVGA OUT\nDI\nMPC\nVGA](.dex-100-50-1z246-1000-10/5431b4416bb66c27a86d12094a6b53eec18852dc91e80b3b0d31efc5d739dec8.jpg)

Manual Rev.: 1.0

Revision Date: Apr.13, 2018

Part No: 50-1Z246-1000

# Revision History

<table><tr><td>Revision</td><td>Release Date</td><td>Description of Change(s)</td></tr><tr><td>1.0</td><td>Apr. 13, 2018</td><td>Initial Release</td></tr><tr><td></td><td></td><td></td></tr></table>

# Preface

# Copyright 2018 ADLINK Technology, Inc.

This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

# Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

# Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.

# Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

# Conventions

Take note of the following conventions used throughout this manual to make sure that users perform certain tasks and instructions properly.

![An icon depicting a white sheet of paper with a folded top-right corner and faint horizontal lines, overlaid with a large red checkmark.](.dex-100-50-1z246-1000-10/1d2a1e6382b7d3dee2bac2b7812cf7f794ec74d26bbc6e7cb7641578fdc8d6b2.jpg)
NOTE:

Additional information, aids, and tips that help users perform tasks.

![The image displays a standard warning sign: a yellow equilateral triangle with a thick black border. Centered inside the triangle is a black exclamation point.](.dex-100-50-1z246-1000-10/d6c70ce5a23d43515c9d6e07105aeedcb0dc5ea42e1f071230a1094a5c93b0a9.jpg)
CAUTION:

Information to prevent minor physical injury, component damage, data loss, and/or program corruption when trying to complete a task.

![A red triangular warning sign with a white exclamation mark in the center.](.dex-100-50-1z246-1000-10/4d111b5c1c9d3435719c0a3971ac16a93ec7830d243096e379ee509d0ebb2642.jpg)
WARNING:

Information to prevent serious physical injury, component damage, data loss, and/or program corruption when trying to complete a specific task.

# Table of Contents

# Revision History........ ii

# Preface ............. iii

# List of Tables ....... ix

# List of Figures ......... ... xi

# 1 Introduction ......

1.1 Features...... 2
1.2 Specifications..... 3
1.3 Mechanical Drawings..... 6
1.4 Front Panel I/O Connectors .. 9

1.4.1 Power Button .. .. 10
1.4.2 VGA Out .... .... 10
1.4.3 DisplayPort .... ... 11
1.4.4 PS/2 Ports .... .. 12
1.4.5 Serial ports (COM1 and COM2) . .. 12
1.4.6 USB Ports ...... .... 13
1.4.7 LAN Ports ..... .... 15
1.4.8 USB Micro-b Connector.. .. 16
1.4.9 DI Connectors... .. 17
1.4.10 LED Indicators . .. 18

1.5 Right Side I/O Connectors .. 19
1.6 Left Side I/O Connectors . 20

1.6.1 DC Power Connector..... ... 20
1.6.2 DVI Port ... ... 21

1.7 DI/O Sample Circuits .... 22

1.7.1 Isolated Digital Input Circuits ..... .. 22

# 2 Getting Started ..... 23

2.1 Unpacking Checklist . 23
2.2 Adaptors & Additional Accessories.. 23
2.3 Wall Mounting .. 23
2.4 DIN Rail Mounting.. 26

2.4.1 DIN Rail Mount (Right Side Up)..... .. 26
2.4.2 DIN Rail Mount (Left Side Up) ... .. 28

2.5 Driver Installation .. 29

# A Appendix: BIOS Setup.......... ...31

A.1 Main ... 32

A.1.1 BIOS Information .... .. 32
A.1.2 System Time/System Date ..... . 32
A.1.3 Board Information ... .. 33

A.2 Advanced.. 34

A.2.1 CPU Configuration... . 35
A.2.2 Graphics Configuration..... .. 36
A.2.3 Onboard Device Configuration . .. 37
A.2.4 Advanced Power Management.. .. 45
A.2.5 USB Configuration.. .. 46
A.2.6 SATA Configuration.. .. 47
A.2.7 TPM Configuration.. .. 48
A.2.8 Network Stack Configuration . .. 49
A.2.9 System Management.. . 50
A.2.10 Miscellaneous.... . 56
A.2.11 Intel® I210 Gigabit Network Connection ....... . 57
A.2.12 NIC Configuration ... .. 58

A.3 Security .... 59

A.3.1 Secure Boot.. .. 60

A.4 Boot .... 61
A.5 Save & Exit .... 62

# Important Safety Instructions........ .... 65

# Getting Service.......... 69

This page intentionally left blank.

# List of Tables

Table 1-1: Power Button LED Indicator Legend . . 10
Table 1-2: VGA Out Pin Assignment . . 11
Table 1-3: DisplayPort Pin Assignment . . 11
Table 1-4: PS/2 Port Pin Assignment . . 12
Table 1-5: COM1 and COM2 Connectors Pin Assignments...... 13
Table 1-6: USB 2.0 Pin Assignments . 14
Table 1-7: USB 3.0 Pin Assignments ... . 15
Table 1-8: LAN Port Pin Definitions .. . 16
Table 1-9: LAN Port LED Legend .. . 16
Table 1-10: USB Micro-b Connector Pin Definitions.............. . 17
Table 1-11: DI Connector Pin Assignment .. . 18
Table 1-12: LED Indicator Legend. . 18
Table 1-13: DC Power Supply Pin Assignments . . 21
Table 1-14: DVI Port Pin Assignments . . 22

This page intentionally left blank.

# List of Figures

Figure 1-1: Front View... . 6

Figure 1-2: Top View... 7

Figure 1-3: (Right) Side View .. 8

Figure 1-4: (Left) Side View .. 8

Figure 1-5: Rear Side View .... .. 8

Figure 1-6: Front Panel I/O ... 9

Figure 1-7: VGA Out Connector... .. 10

Figure 1-8: DisplayPort Connector... .. 11

Figure 1-9: PS/2 Port .. .. 12

Figure 1-10: COM1 and COM2 Connectors... .. 13

Figure 1-11: USB 2.0 .. .. 14

Figure 1-12: USB 3.0 ... .. 14

Figure 1-13: LAN Port ... .. 15

Figure 1-14: USB Micro-b Connector.. .. 17

Figure 1-15: DI Connector... .. 17

Figure 1-16: Right Side Panel I/O . . 19

Figure 1-17: Left Side Panel I/O . .. 20

Figure 1-18: Power Supply Connector..... .. 21

Figure 1-19: DVI Port ... .. 21

Figure 1-20: Digital Input Sample Application Circuit. .. 22

Figure 2-1: Wall-mount (Rear Panel Up)... . 24

Figure 2-2: Wall-mount (Right Side Panel Up).. . 24

Figure 2-3: Wall-mount (Left Panel Up) .. .. 25

Figure 2-4: Wall-mount Bracket Attachment (Rear Panel Up) ......... 25

This page intentionally left blank.

# 1 Introduction

![U3 U2 U1\nCOM1\nHD DP\nCOM2\nADLINK\nMPC\nVGA OUT\nDI\nMPC\nVGA](.dex-100-50-1z246-1000-10/3a72f35cb3ff89e54ff72a53cdb3b517fff34f1ffbee63f132ab4896557cc40b.jpg)

ADLINK's DEX-100 intelligent data extraction system utilizes builtin frame grabber and optical character recognition (OCR) to collect and process legacy system-based display content. Easy-to-use DEX-PRO utilities simplify mapping of acquired video content with no additional programming required, with the system acquiring and processing targeted display content from multiple pages.

2 DI connections interface with external devices and extend M2M function, enabling integration of new devices such as barcode scanners and providing synchronization of all collected data for subsequent distribution to anywhere in the network.

The DEX-100 utilizes the DDS (Data Distribution Services) protocol to deliver full data availability in real time, enhancing reliability and efficiency. Remote control is also available.

# 1.1 Features

 Non-intrusive system
 VGA/DVI output Port support
 Remote monitoring by PS/2 and USB keyboard mouse devices
 Pre-installed DEX-PRO utility supports keyboard/mouse script edits and image data transformation
 Real-time data extraction and OP screen presentation
 Offline script editing
 Windows 10 IoT
 Data extraction via OCR (optical character recognition):

 Up to 500 tags/30 extraction pages
 OCR speed 35ms/ROI (at 1080x768 screen resolution, 52x20 pixels, w/ Windows default font @ 9 pt, speed may vary with resolution and font size)

 Data Extraction and User Full Machine Control modes hard or soft switchable by user

 Script generation:

 Over 50 script commands supported
 Online and offline scripting supported (with offline reducing machine interference)
 Pre-configured script loading for script deployment

 Event notification through machine alarm/warnings
 Data extraction summary page supports up to 500 rows of data
 Local Log file retained for up to 120 days

# 1.2 Specifications

<table><tr><td colspan="2">System</td></tr><tr><td>Processor</td><td>Quad core Intel® Atom® processor E3950</td></tr><tr><td>Operating System</td><td>Windows 10 IoT Enterprise 64</td></tr><tr><td>RAM</td><td>DDR3L 1066 4GB</td></tr><tr><td>Storage</td><td>128 GB SSD</td></tr><tr><td colspan="2">I/O Interface</td></tr><tr><td colspan="2">► 2x GbE LAN (Intel® I210-IT)</td></tr><tr><td colspan="2">► 2x COM (2x RS-232/422/485)</td></tr><tr><td colspan="2">► 2x USB 2.0 + 2x USB 3.0 + 2x USB Micro-B</td></tr><tr><td colspan="2">► 2x PS/2 input+2x PS/2 output (keyboard/mouse)</td></tr><tr><td colspan="2">► VGA input, DVI input,</td></tr><tr><td colspan="2">► VGA output, DVI output,</td></tr><tr><td colspan="2">► DisplayPort (For local DP display)</td></tr><tr><td colspan="2">► 2x isolated DI</td></tr><tr><td colspan="2">Power Supply</td></tr><tr><td>DC Input</td><td>12-36 VDC</td></tr><tr><td>AC Input</td><td>Optional 40W AC/DC adapter</td></tr><tr><td>LED Indicators</td><td>Power/Storage/WDT</td></tr><tr><td colspan="2">Mechanical</td></tr><tr><td>Dimensions</td><td>140 (W) x 110 (D) x 80 (H) mm</td></tr><tr><td>Weight</td><td>&lt; 1 kg</td></tr><tr><td>Construction</td><td>Full aluminum alloy</td></tr><tr><td>Mounting</td><td>Wall mount, DIN rail</td></tr><tr><td>Communication Protocol and Interface</td><td>DDS (Distributed Data Service), REST</td></tr><tr><td>Field Bus Communication</td><td>Modbus TCP and Modbus RTU</td></tr><tr><td colspan="2">Environmental &amp; Electrical</td></tr><tr><td>Operating Temperature</td><td>Standard: 0 to 50°C</td></tr><tr><td>Storage Temperature</td><td>-40°C to 85°C</td></tr><tr><td>Humidity</td><td>Approx. 95% @40°C (non-condensing)</td></tr><tr><td>Vibration</td><td>Operating 5 Grms, 5-500Hz, 3 axes w/ SD/mSATA SSD</td></tr><tr><td>ESD</td><td>mSATA SSDESD Contact +/-4 KV, Air +/-8 KV</td></tr><tr><td>Shock</td><td>Operating 100G, half sine 11 ms duration w/ SD/mSATA SSD</td></tr><tr><td>EMC</td><td>CE &amp; FCC Class A (EN610006-4/EN61000-6-2)</td></tr><tr><td>Safety</td><td>UL by CB</td></tr></table>

<table><tr><td colspan="3">Machine Output Display Resolution Support</td></tr><tr><td>VGA</td><td>640 x 480, 60fps640 x 480, 75fps640 x 480, 85fps800 x 600, 60fps800 x 600, 75fps800 x 600, 85fps1024 x 768, 60fps1024 x 768, 75fps1024 x 768, 85fps1152 x 864, 75fps1280x 720, 50 fps1280x 720, 60 fps1280 x 768, 60fps1280 x 768, 75 fps1280 x 768, 85 fps</td><td>1280 x 800, 60fps1280 x 800, 75 fps1280 x 800, 85 fps1280 x 1024, 60fps1280 x 1024, 75 fps1280 x 1024, 85 fps1360x 768, 60 fps1400x 1050, 60 fps1400x 1050, 75 fps1440x 900, 60 fps1600x 1200, 60fps1680x 1050, 60 fps1920x 1080, 50 fps1920x 1080, 60 fps</td></tr><tr><td>DVI</td><td>640 x 480, 60 fps800 x 600, 60 fps1024 x 768, 60 fps1024 x 768, 75 fps1152 x 864, 75 fps1280 x 720, 50 fps1280 x 720, 60 fps1280 x 768, 60 fps1280 x 800, 60 fps1280 x 800, 60 fps1280 x 960, 60 fps1280 x1024, 60 fps</td><td>1360 x 768, 60 fps1366 x 768, 60 fps1440 x 900, 60 fps1440 x 900, 75 fps1600 x 1200, 60 fps1680 x 1050, 60 fps1920 x 1080, 24 fps1920 x 1080, 50 fps1920 x 1080, 60 fps1920 x 1200, 50 fps1920 x 1200, 60 fps</td></tr></table>

<table><tr><td colspan="3">Power Consumption</td></tr><tr><td>Power off</td><td>1.2W(0.05A@24VDC)</td><td>In shutdown mode with DC input and only USB keyboard/mouse</td></tr><tr><td>System idle</td><td>21W(0.86A@24VDC)</td><td>Under Windows Desktop with no application programs executed</td></tr><tr><td>System full load</td><td>164W(6.81A@24VDC)</td><td>► Total PoE loading is 32W► Dummy load of 4.5W in connection to represent each USB 3.0 load► Dummy load of 2.5W in connection to represent each USB 2.0 load► HDD permanently accessed► CPU(i7-6700) @ 100% loading (by Burn-in test program)</td></tr><tr><td>Recommended power supply</td><td>180W</td><td></td></tr></table>

# 1.3 Mechanical Drawings

![The image displays a digital icon of a white document with its top-right corner folded down. Faint horizontal gray lines appear across the lower section of the page. A large, bold red checkmark is superimposed diagonally over the center of the document. There is no actual text present.](.dex-100-50-1z246-1000-10/d0dbe975f2c6da5e636244637a81f2ae1f88c12eb09cff99df4dfea802a514ae.jpg)
NOTE:

All dimensions shown are in millimeters (mm) unless otherwise stated.

![140\n80\n0.5](.dex-100-50-1z246-1000-10/aa9051e2cebf866710b04594a23112c191a2ae87ee7b34b6c6e1b80253880f05.jpg)

Figure 1-1: Front View

![Technical line drawing of a heat exchanger or cooling unit with horizontal rows and mounting holes, dimensioned as 140 units (no text or symbols beyond measurement lines)](.dex-100-50-1z246-1000-10/c0d67fa68410ccfa13cba02e6dbaa5e3c4f9c25101adde54bc4893d54a964381.jpg)

Figure 1-2: Top View

![MPC\nVGA](.dex-100-50-1z246-1000-10/8c5b45d8f5062808ea9ae4076cd87062032ff4de2f55d258c5be2cfebb96e348.jpg)

Figure 1-3: (Right) Side View
![V-\nV+\n24V\nDVI\nMPC DVI](.dex-100-50-1z246-1000-10/cf5095f02e64c3da3079ab5529db2d6f3bbb73f6bbc9cf084c5a28353d3ae603.jpg)

Figure 1-4: (Left) Side View

![Technical line drawing of a rectangular electronic enclosure with mounting holes and mounting points (no text or symbols)](.dex-100-50-1z246-1000-10/907abdd901dfd2a0114de669d5d061c7c71617c67c25b53419c884fbe96d8925.jpg)

Figure 1-5: Rear Side View

# 1.4 Front Panel I/O Connectors

![U3 U2 U1\nCOM1\n3\n4\nCOM2\nADLINK\nMPC\nVGA OUT\nDI](.dex-100-50-1z246-1000-10/68fd298844fa9930677519a739f059e92e72e7b571ae4125282c70541023d7a1.jpg)

Figure 1-6: Front Panel I/O

I/O connectors and controls on the DEX-100 front panel, as labeled, are as follows

 Power button
 VGA Out
 DisplayPort
 PS/2 keyboard port
 PS/2 mouse port
 Serial ports (COM1 and COM2)
 USB2.0 port x2
 USB 3.0 port x2
 LAN port x2
 Micro USB type B x2
 DI connectors
 LED indicators

# 1.4.1 Power Button

System is turned on when button is pressed, and the power LED lit. If the system hangs, depressing the button for 5 seconds powers down the unit. LED indicator functions as follows

<table><tr><td>System Status</td><td>Power Button LED</td></tr><tr><td>Idle on OS</td><td>Lit</td></tr><tr><td>Power OFF</td><td>Off</td></tr><tr><td>Sleep (S3)</td><td>Blinking</td></tr></table>

Table 1-1: Power Button LED Indicator Legend

# 1.4.2 VGA Out

One VGA connector for output supports 1920x1080 60Hz timing signal.

![1\n6\n15](.dex-100-50-1z246-1000-10/8d950d0be3d90832c8bc4712179688f3b19866c8eb51aaccf12fb0b881f9b921.jpg)

Figure 1-7: VGA Out Connector

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>RED</td><td>9</td><td>KEY/PWR</td></tr><tr><td>2</td><td>GREEN</td><td>10</td><td>GND</td></tr><tr><td>3</td><td>BLUE</td><td>11</td><td>ID0/RES</td></tr><tr><td>4</td><td>ID2/RES</td><td>12</td><td>ID1/SDA</td></tr><tr><td>5</td><td>GND</td><td>13</td><td>HSync</td></tr><tr><td>6</td><td>RED_RTN</td><td>14</td><td>VSync</td></tr></table>

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>7</td><td>GREEN_RTN</td><td rowspan="2">15</td><td rowspan="2">ID3/SCL</td></tr><tr><td>8</td><td>BLUE_RTN</td></tr></table>

Table 1-2: VGA Out Pin Assignment

# 1.4.3 DisplayPort

The DisplayPort v1.1 connection supports up to 3840x2160 @ 30Hz.

![19\n1\n20\n2](.dex-100-50-1z246-1000-10/81f11895ac23026290dc0c911b5e79c9663353b7cbdff09ae6ff09c12c00ee38.jpg)

Figure 1-8: DisplayPort Connector

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>CN_DP0_P</td><td>2</td><td>GND</td></tr><tr><td>3</td><td>CN_DP0_N</td><td>4</td><td>CN_DP1_P</td></tr><tr><td>5</td><td>GND</td><td>6</td><td>CN_DP1_N</td></tr><tr><td>7</td><td>CN_DP2_P</td><td>8</td><td>GND</td></tr><tr><td>9</td><td>CN_DP2_N</td><td>10</td><td>CN_DP3_P</td></tr><tr><td>11</td><td>GND</td><td>12</td><td>CN_DP3_N</td></tr><tr><td>13</td><td>CN_CAD-L</td><td>14</td><td>CN_CEC</td></tr><tr><td>15</td><td>CN_AUX_P</td><td>16</td><td>GND</td></tr><tr><td>17</td><td>CN_AUX_N</td><td>18</td><td>DDP_HPD</td></tr><tr><td>19</td><td>GND</td><td>20</td><td>P3V3</td></tr></table>

Table 1-3: DisplayPort Pin Assignment

# 1.4.4 PS/2 Ports

Two PS/2 ports support keyboard and mouse connection.

![6\n5\n4\n3\n2\n1](.dex-100-50-1z246-1000-10/9a4d7a2f443b539aa9e390de935566b794f6e6b3afd74ad8793e0b074f49bf52.jpg)

Figure 1-9: PS/2 Port

<table><tr><td>Pin</td><td>Signal</td><td>Description</td></tr><tr><td>1</td><td>+DATA</td><td>Data</td></tr><tr><td>2</td><td>N/A</td><td>N/C [b]</td></tr><tr><td>3</td><td>GND</td><td>Ground</td></tr><tr><td>4</td><td>Vcc</td><td>+5 V DC at 275 mA</td></tr><tr><td>5</td><td>+CK</td><td>Clock</td></tr><tr><td>6</td><td>N/A</td><td>N/C (c]</td></tr></table>

Table 1-4: PS/2 Port Pin Assignment

# 1.4.5 Serial ports (COM1 and COM2)

COM1 supports RS-232/422/485 based on switch setting on the mainboard, with RS-232 the default, and COM2 supports RS-232 only.

![6\n9\n1\n5](.dex-100-50-1z246-1000-10/78b2135d9575714de60a0811837636ba640e94946f317369a21bcc6f8ea2ae5c.jpg)

Figure 1-10: COM1 and COM2 Connectors

<table><tr><td>Pin</td><td colspan="3">Signal</td></tr><tr><td></td><td>RS232</td><td>RS422</td><td>RS485</td></tr><tr><td>1</td><td>DCD#</td><td>TXD422-</td><td>485DATA-</td></tr><tr><td>2</td><td>RXD</td><td>TXD422+</td><td>485DATA+</td></tr><tr><td>3</td><td>TXD</td><td>RXD422+</td><td>N/S</td></tr><tr><td>4</td><td>DTR#</td><td>RXD422-</td><td>N/S</td></tr><tr><td>5</td><td>GND</td><td>N/S</td><td>N/S</td></tr><tr><td>6</td><td>DSR#</td><td>N/S</td><td>N/S</td></tr><tr><td>7</td><td>RTS#</td><td>N/S</td><td>N/S</td></tr><tr><td>8</td><td>CTS#</td><td>N/S</td><td>N/S</td></tr><tr><td>9</td><td>RI#</td><td>N/S</td><td>N/S</td></tr></table>

Table 1-5: COM1 and COM2 Connectors Pin Assignments

# 1.4.6 USB Ports

2 USB 3.0 and 2USB 2.0 ports each provide 5V power for connected devices.

![1\n4](.dex-100-50-1z246-1000-10/5624d08fb1259fe9cfd3dfa77cb5be4f214d1fa63834ed0ba5be77f13b3e3af1.jpg)

Figure 1-11: USB 2.0

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>Vcc</td></tr><tr><td>2</td><td>UV0-</td></tr><tr><td>3</td><td>UV0+</td></tr><tr><td>4</td><td>GNE</td></tr></table>

Table 1-6: USB 2.0 Pin Assignments

![9\n5\n1\n4](.dex-100-50-1z246-1000-10/035bad33ca08c0df4fd6b6240af04a6b84035c5c7a26e5a3d3be5968d2684dd7.jpg)

Figure 1-12: USB 3.0

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>USB3.0_P5VA</td></tr><tr><td>2</td><td>USB2_CMAN</td></tr><tr><td>3</td><td>USB2_CMAP</td></tr><tr><td>4</td><td>GND</td></tr><tr><td>5</td><td>USB3A_CMRXN</td></tr><tr><td>6</td><td>USB3A_CMRXP</td></tr></table>

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>7</td><td>GND</td></tr><tr><td>8</td><td>USB3A_CMTXN</td></tr><tr><td>9</td><td>USB3A_CMTXP</td></tr></table>

Table 1-7: USB 3.0 Pin Assignments

# 1.4.7 LAN Ports

Two Gigabit Ethernet ports support the intel i210IT GbE controller, providing

 IEEE 802.3az Energy Efficient Ethernet
 IEEE 1588/802.1AS precision time synchronization
 IEEE 802.3Qav traffic shaper
 Interrupt moderation, VLAN support, IP checksum offload
 PCIe OBFF (Optimized Buffer Flush/Fill)
 Four transmit and four receive queues
 RSS and MSI-X to lower CPU utilization in multi-core systems
 ECC - error correcting memory in packet buffers
 Wake-On-LAN
 NC-SI for increased bandwidth passthrough
 Preboot eXecution Environment (PXE) flash interface
 Jumbo frame support

![LED1\nLED2\n8\n1](.dex-100-50-1z246-1000-10/81ca5eb24ca3547f668a3584a1fda7a4bad0bd2a9d7d978a582cb09147da306c.jpg)

Figure 1-13: LAN Port

<table><tr><td>Pin</td><td>10BASE-T/100BASE-TX</td><td>1000BASE-T</td></tr><tr><td>1</td><td>TX+</td><td>LAN_MDIO+</td></tr><tr><td>2</td><td>TX-</td><td>LAN_MDIO-</td></tr><tr><td>3</td><td>RX+</td><td>LAN_MDI1+</td></tr><tr><td>4</td><td>N/A</td><td>LAN_MDI2+</td></tr><tr><td>5</td><td>N/A</td><td>LAN_MDI2-</td></tr><tr><td>6</td><td>RX-</td><td>LAN_MDI1-</td></tr><tr><td>7</td><td>N/A</td><td>LAN_MDI3+</td></tr><tr><td>8</td><td>N/A</td><td>LAN_MDI3-</td></tr></table>

Table 1-8: LAN Port Pin Definitions

<table><tr><td>LED</td><td>Activity</td><td></td></tr><tr><td rowspan="3">LED1(Active/Link)</td><td>Off</td><td>No Link</td></tr><tr><td>Orange</td><td>Link Active</td></tr><tr><td>Blinking</td><td>Data Activity</td></tr><tr><td rowspan="3">LED2(Speed)</td><td>Off</td><td>10 Mb connection</td></tr><tr><td>Green</td><td>100 Mb connection</td></tr><tr><td>Orange</td><td>1 Gb connection</td></tr></table>

Table 1-9: LAN Port LED Legend

# 1.4.8 USB Micro-b Connector

USB keyboard and mouse bypass are provided by dual USB micro-b connectors, for connection to machine PC.

![1\n5](.dex-100-50-1z246-1000-10/6bcfd205c0806c354955200f5b2557e7d9384002a0ebd700e6802843de97bdfb.jpg)

Figure 1-14: USB Micro-b Connector

<table><tr><td>Pin</td><td>Signal</td><td>Description</td></tr><tr><td>1</td><td>VBUS</td><td>+5 V</td></tr><tr><td>2</td><td>D-</td><td>Data-</td></tr><tr><td>3</td><td>D+</td><td>Data+</td></tr><tr><td>4</td><td>ID</td><td>N/A</td></tr><tr><td>5</td><td>GND</td><td>Signal ground</td></tr></table>

Table 1-10: USB Micro-b Connector Pin Definitions

# 1.4.9 DI Connectors

Dual channel digital input function is provided within a terminal block male connector.

![DIN1\nDIN2\nCOM](.dex-100-50-1z246-1000-10/daaac46e4e66d08398817431218b01f7b3ddf08a1431d8de03a7a755243d58ca.jpg)

Figure 1-15: DI Connector

<table><tr><td>Pin</td><td></td><td>VCOM=0V</td><td>VCOM=24V</td></tr><tr><td rowspan="2">1</td><td rowspan="2">Digital input 2</td><td>24V: Enabled</td><td>0V: Enabled</td></tr><tr><td>0V/open: Disabled</td><td>24V/open: Disabled</td></tr><tr><td>2</td><td>VCOM</td><td>0V</td><td>24V</td></tr><tr><td rowspan="2">3</td><td rowspan="2">Digital input 1</td><td>24V: Enabled</td><td>0V: Enabled</td></tr><tr><td>0V/open: Disabled</td><td>24V/open: Disabled</td></tr></table>

Table 1-11: DI Connector Pin Assignment

# 1.4.10 LED Indicators

In addition to the LED of the power button, LEDs on the front panel indicate operations as follows.

<table><tr><td>Indicator</td><td>Color</td><td>Description</td></tr><tr><td>U1</td><td>Green</td><td>User defined</td></tr><tr><td>U2</td><td>Green</td><td>User defined</td></tr><tr><td>U3</td><td>Green</td><td>User defined</td></tr><tr><td>Watchdog Timer (WDT)</td><td>Yellow</td><td>Indicates watchdog timer status, flashing when watchdog timer starts, with system will auto rebooting when timer expires</td></tr><tr><td>HDD</td><td>Red</td><td>Blinks when SATA HDD is active</td></tr><tr><td>Standby Power</td><td>Blue</td><td>Lights when DC input is plugged in, off when system powers on</td></tr></table>

Table 1-12: LED Indicator Legend

# 1.5 Right Side I/O Connectors

![Back panel of a black electronic device showing VGA, two SGA connectors, and ventilation slots (no readable text or symbols beyond labels)](.dex-100-50-1z246-1000-10/15ef71fef2015dae89a0ba3f94e9cca2934fd305473265918e996d04af410217.jpg)

Figure 1-16: Right Side Panel I/O

I/O connectors and controls on the DEX-100 right side panel, as labeled, are as follows

 VGA In
 PS/2 mouse port
 PS/2 keyboard port

# 1.6 Left Side I/O Connectors

![V-\nm\nV+\n24V\nDVI\nMPC DVI](.dex-100-50-1z246-1000-10/250087dbe397afeca0011ae2bf431ccd9a6716415a0251973df6db92b8fc70ae.jpg)

Figure 1-17: Left Side Panel I/O

I/O connectors and controls on the DEX-100 left side panel, as labeled, are as follows

 DC Power Connector
 DVI port
 MPC DVI port

# 1.6.1 DC Power Connector

Consists of V+, chassis ground, and V- pins. V+ and V- pins accept DC power input and chassis ground pin enhances EMC compatibility. The DC power input accepts 24 VDC input.

![V-\nV+\n24V =](.dex-100-50-1z246-1000-10/6003193e45f7e44e2b47add0dfe2fa3513888aa85b3aa472e8269e8e5a8fea59.jpg)

Figure 1-18: Power Supply Connector

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>V+(DC_IN)</td></tr><tr><td>2</td><td>GND(CHGND)</td></tr><tr><td>3</td><td>V- (DGND)</td></tr></table>

Table 1-13: DC Power Supply Pin Assignments

# 1.6.2 DVI Port

Both DVI-D connectors, one for input and the other for output, support 1920x1080 60Hz timing signal.

![1 2 3 4 5 6 7 8\n9 10 11 12 13 14 15 16\n17 18 19 20 21 22 23 24\nC1 C2\nC3 C4\nC5](.dex-100-50-1z246-1000-10/43c10f904c76e12016e43d80234f09238c7e6d57a7b4cbe155ebaa348f4c55c0.jpg)

Figure 1-19: DVI Port

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>V+(DC_IN)</td></tr></table>

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>2</td><td>GND(CHGND)</td></tr><tr><td>3</td><td>V- (DGND)</td></tr></table>

Table 1-14: DVI Port Pin Assignments

# 1.7 DI/O Sample Circuits

# 1.7.1 Isolated Digital Input Circuits

The input can accept voltages up to 24V, with extra 10kΩ input resistors (Rs). Connections between outside signals are as follows.

![3.3V\nIDI\nOpto-\nisolators\n2.4kΩ\nIDI_H\nRs\n+\nIDI_L](.dex-100-50-1z246-1000-10/d9aa03f3ededcbdf12da3a09017f26d52c20924e55a70dbd1c2762f4a3941748.jpg)

Figure 1-20: Digital Input Sample Application Circuit

# 2 Getting Started

# 2.1 Unpacking Checklist

Before unpacking, check the shipping carton for any damage. If the shipping carton and/or contents are damaged, inform your dealer immediately. Retain the shipping carton and packing materials for inspection. Obtain authorization from your dealer before returning any product to ADLINK. Ensure that the following items are included in the package.

 DEX-100
 DI Connector
 DC Power Connector
 Recovery CD
 Technical service card

# 2.2 Adaptors & Additional Accessories

Device adaptors and other optional accessories should only be obtained through your ADLINK dealer. For more information, see “Getting Service” on page 69.

# 2.3 Wall Mounting

The DEX-100 provides 3 wall-mount configurations.

![The image shows a white document icon featuring a folded top-right corner and faint horizontal lines running across the lower portion. A large, bold red checkmark is superimposed diagonally across the center of the document.](.dex-100-50-1z246-1000-10/6b55d8fa7e86e389ab8d8df2e81fef7d55b8da9ee0d2f3489c7de696c070f137.jpg)
NOTE:

Mounting screws must be at least size #10 (min. 0.1875 in. or 4.762 mm) or M5 type long enough to provide sufficient support.

![Top-down view of a heat exchanger or cooling unit with visible cooling fins and mounting flanges (no text or symbols)](.dex-100-50-1z246-1000-10/13400178eb1768f096d2e2126ae5e1f111576c5a0076a2d97490b6b2b7f33041.jpg)

Figure 2-1: Wall-mount (Rear Panel Up)

![Top-down view of a mechanical or electronic component with vertical ribbed structure and mounting holes (no text or symbols visible)](.dex-100-50-1z246-1000-10/e2af002f067a40400c2786116ee70814ab4944aae802242d2dfc197233b41683.jpg)

Figure 2-2: Wall-mount (Right Side Panel Up)

![Top-down view of a dark rectangular electronic device with ribbed top and mounting holes (no visible text or symbols)](.dex-100-50-1z246-1000-10/ac7a6038fdad1bc7aa92ca9d6faae775b37bfeea592592c35884a0c33d0f6ad0.jpg)

Figure 2-3: Wall-mount (Left Panel Up)

Attach the provided wall-mount brackets in the four screw holes on the underside of the chassis (use four M4 screws) according to the desired configuration (wall-mount with rear panel up is shown as an example).

![Technical line drawing of an electronic device with labeled components (no text or symbols present)](.dex-100-50-1z246-1000-10/6da02c0a19565e893fd0fa292a874b23b2dcad51735255ac62a461dadd808383.jpg)

Figure 2-4: Wall-mount Bracket Attachment (Rear Panel Up)

# 2.4 DIN Rail Mounting

DEX-100 DIN rail installation is provided in right side up and left side up configurations.

# 2.4.1 DIN Rail Mount (Right Side Up)

Place the terminal plate with VGA label up and secure the provided DIN rail bracket via the two screw holes on the rear side of the terminal plate.

![VGA\nVAD](.dex-100-50-1z246-1000-10/a60c320e5b9d0ffd3b0ec3b5311562cef14edd4d11b725996448c071d3d2c6a3.jpg)

3. Secure the terminal plate via the 3 screw holes to the rear side of the chassis.

![Technical diagram of an electronic device with labeled components and mounting points](.dex-100-50-1z246-1000-10/3c42555e68d118e7a0b476ff917cd9412eb2c09d1c71beff73dce6d2035d9581.jpg)

# 2.4.2 DIN Rail Mount (Left Side Up)

1. Place the terminal plate with DVI label up and secure the provided DIN rail bracket via the two screw holes on the rear side of the terminal plate.

![DVI\nV5A](.dex-100-50-1z246-1000-10/3466a71d8269070002239dd31b2f3b2ed0c48762a66fa5fd11a304092073a0fd.jpg)

2. Secure the terminal plate via the 3 screw holes to the rear side of the chassis.

![Technical line drawing of an electronic device showing internal components and mounting points (no text or symbols)](.dex-100-50-1z246-1000-10/067d0325680ba6e3aeb90f876a30f75c76259cfcb50e179485f62fcd274a9210.jpg)

# 2.5 Driver Installation

![The image displays a simple graphic icon featuring a white document with horizontal lines near the bottom, resembling a notepad or a letter. A large, thick red checkmark is drawn diagonally across the center of the paper, extending from the bottom left to the top right. The top left corner of the paper is curled or folded over. There is no text present.](.dex-100-50-1z246-1000-10/44d30e242971f3e56e8e277461af0f597387d9701b0316fd5d22680373cfb32b.jpg)
NOTE:

Due to lack of controller support under Windows 10, successful OS installation may be prevented. For available solutions, please contact your ADLINK representative.

Download requisite drivers, as follows, for your system from http:// www.adlinktech.com and install.

 Chipset
 Graphics
 Ethernet
 USB3
 Serial I/O
 TXE (Intel® Trusted Execution Technology)
 DEX-PRO Utility

This page intentionally left blank.

# Appendix A BIOS Setup

![The image features a graphic icon of a white document with a folded top-left corner and faint horizontal lines suggesting text. Superimposed over the document is a large, bold red checkmark.](.dex-100-50-1z246-1000-10/cec7e63ad8ee599c099c845c4f6e1ffbdf3ef6553fe6d96a6a877a35a1a0d3a4.jpg)
NOTE:

BIOS options in the manual are for reference only, and are subject to configuration.

The Basic Input/Output System (BIOS) is a program that provides a basic level of communication between the processor and peripherals. In addition, the BIOS also contains codes for various advanced features applied to the DEX-100. The BIOS setup program includes menus for configuring settings and enabling features of the DEX-100 series. Most users do not need to use the BIOS setup program, as the DEX-100 ships with default settings that work well for most configurations.

Enter BIOS setup by selecting DEL when the system is powered on. The POST (Power On Self Test) message appears. Selecting F7 at POST opens the one-time Boot Menu, allowing selection of boot device(s).

# A.1 Main

![Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.\nMain Advanced Security Boot Save & Exit\nBIOS Information\nBIOS Vendor American Megatrends\nBIOS Version 1.00.10\nBuild Date 12/27/2017\nMRC Version 0.56\nGOP Version 10.0.1035\nTXE FW Version 3.1.50.2222\nBIOS Boot Source Primary BIOS\nSystem Information\nProject Name DEX-series\nCPU Board version A3\nCPU Brand String Intel(R) Atom(TM) Proce\nssor E3930 @ 1.30GHz\nCPU Frequency 1.30GHz\nTotal Memory 2048 MB(DDR3L)\nMemory Frequency 1600 MHz\nSOC SKU DO\nBoard Information\nSystem Date (Wed 12/27/2017)\nSystem Time (18:10:54)\nAccess Level Administrator\nBoard Information\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.](.dex-100-50-1z246-1000-10/1f0420550471e2e891e4a4ddc22d1080b9081d2b820d408c3bd5ce4aad5ac658.jpg)

# A.1.1 BIOS Information

Shows current system BIOS core version, BIOS version and Board version.

# A.1.2 System Time/System Date

Changes system time and date. Highlight System Time or System Date using the up or down &lt;Arrow&gt; keys. Enter new values using the keyboard then &lt;Enter&gt;. Use &lt; Tab &gt; to move between fields. The date must be entered in MM/DD/YY format. The time is entered in HH:MM:SS format.

![The image shows a white document icon with a folded top-right corner and faint horizontal grey lines. A large, bold red checkmark is superimposed over the center of the paper.](.dex-100-50-1z246-1000-10/f59aed6b695d90f7cac6e4193a0340369983de913d2f9cab8f2327ace297661b.jpg)
NOTE:

The time is in 24-hour format, for example, 5:30 A.M. appears as 05:30:00, and 5:30 P.M. as 17:30:00.

# A.1.3 Board Information

![Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.\nMain\nBoard Information\nSerial Number      9876543211\nManufacturing Date    2013/09/31\nLast Repair Date    2013/09/01\nMAC ID        665544332211\nRuntime Statistics\nTotal Runtime     28h 23m\nCurrent Runtime     0h 03m 06s\nPower Cycles     99\nBoot Cycles     1888\nBoot Reason      Software-reset\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.](.dex-100-50-1z246-1000-10/04c0e5b3afb16dd7cb9b12365c9ee6c915487153e2d30be8042d2ce8b3e39f2c.jpg)

Displays serial number, manufacturing date, last repair date, and MAC ID. As well, Runtime Statistics are listed, including total runtime, current runtime, power cycles, boot cycles, and boot reason.

# A.2 Advanced

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.</td></tr><tr><td colspan="2">Main Advanced Security Boot Save &amp; Exit</td></tr><tr><td>CPU Configuration Graphics Configuration Onboard Device Configuration Advanced Power Management USB Configuration SATA Configuration TPM Configuration Network Stack Configuration System Management Miscellaneous Intel(R) I210 Gigabit Network Connection - 00:30:64:0A:... Intel(R) I210 Gigabit Network Connection - 00:30:64:0A:...</td><td>CPU Configuration Parameters</td></tr><tr><td></td><td>+: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F8: Previous Values F9: Optimized Defaults F10: Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.</td></tr></table>

![The image displays a yellow triangular warning sign with a black border and a black exclamation point in the center. Below the triangle is a white rectangular area containing the text 'CAUTION:' in black capital letters.](.dex-100-50-1z246-1000-10/8932e59acb267ab2cb8b17f51d5b528ea332fd06e409a4c0b40c895bcfc887b5.jpg)

Setting incorrect or conflicting values in Advanced BIOS Setup may cause system malfunction.

# A.2.1 CPU Configuration

![Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.\nAdvanced\nCPU Configuration\nCPU Signature 506C9\nMicrocode Patch 2C\nMax CPU Speed 1300 MHz\nMin CPU Speed 800 MHz\nCPU Speed 1300 MHz\nProcessor Cores 2\nHyper Threading Technology Not Supported\nIntel VT-x Technology Supported\n64-bit Supported\nL1 Data Cache 24 KB x 2\nL1 Code Cache 32 KB x 2\nL2 Cache 1024 KB x 2\nL3 Cache Not Present\nActive Processor Cores (Disabled)\nIntel Virtualization Technology (Enabled)\nVT-d (Disabled)\nTurbo Mode (Enabled)\nCritical Trip Point (Disabled)\nPassive Cooling Trip Point (Disabled)\nNumber of cores to enable in each processor package.\n++: Select Screen\nT4: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit](.dex-100-50-1z246-1000-10/39142f226388c8ea10367b96acdef0bd32bed406408bb7f7d4244ee36b949704.jpg)

# Active Processor Cores

Number of cores to enable in each processor package.

# Intel Virtualization Technology

When enabled, allows a VMM to utilize the additional hardware capabilities provided by Vanderpool Technology

# VT-d

Enables/disables CPU VT-d

# Turbo Mode

Enables/disables Turbo Mode.

# Critical Trip Point

Temperature threshold of the Critical Trip Point.

# Passive Cooling Trip Point

Temperature threshold of the Passive Cooling Trip Point.

# A.2.2 Graphics Configuration

![Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.\nAdvanced\nGraphics Configuration\nGTT Size (8MB)\nAperture Size (256MB)\nDVMT Pre-Allocated (64M)\nDVMT Total Gfx Mem (256M)\nSelect the GTT Size\n++: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.18.1263, Copyright (C) 2017 American Megatrends, Inc,](.dex-100-50-1z246-1000-10/d442d9a12963b616ce06bd749e718ed2d5fe74f658745e14f48e453b05541855.jpg)

# GTT Size

Sets GTT size

# Aperture Size

Sets aperture size

# DVMT Pre-Allocated

Sets size of DVMT 5.0 pre-allocated (fixed) graphics memory used by internal graphics device

# DVMT Total Gfx Mem

Sets size of DVMT5.0 total graphic memory used by internal graphics device

# A.2.3 Onboard Device Configuration

![Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.\nAdvanced\nOnboard Device Configuration\nSerial Port Configuration\nCDM1 Device Settings	IO=3F8h; IRQ=4;\nCDM1 Control	(RS485)\nCDM2 Device Settings	IO=2F8h; IRQ=3;\nCDM2 Control	(RS485)\nHSUART	(Disabled)\n► Serial Console Redirection\nLan Port Configuration\nLAN #1(Intel I210)	(Enabled)\nLAN #2(Intel I210)	(Enabled)\nAudio Configuration\nRealtek Audio Support	(Disabled)\nSelect COM1 mode. RS232, RS422\nor RS485\n++: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.18.1263, Copyright (C) 2017 American Megatrends, Inc.](.dex-100-50-1z246-1000-10/5fe53073ee265bef34a66f22b425d6c82569bec0a5ee4d76952eb3830e35ce26.jpg)

# COM1 Control

Selects COM1 mode from among RS232, RS422, and RS485.

# COM2 Control

Selects COM2 mode from among RS232, RS422, and RS485.

# HSUART

Enables/disables LPSS HSUART support.

# LAN #1 (Intel I210)

Enables/disables LAN device #1.

# LAN #2 (Intel I210)

Enables/disables LAN device #2.

# Realtek Audio Support

Enables/disables Realtek audio device.

# Serial Console Redirection

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc. Advanced</td></tr><tr><td>Serial Console Redirection COM1 Console Redirection [Disabled] Console Redirection Settings COM2 Console Redirection [Disabled] Console Redirection Settings</td><td>Console Redirection Enable or Disable.</td></tr><tr><td></td><td>+: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F8: Previous Values F9: Optimized Defaults F10: Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.</td></tr></table>

COM 1

# Console Redirection

Enables/Disables COM 1 console redirection.

# Console Redirection Settings (COM 1)

![Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.\nAdvanced\nCOM1\nConsole Redirection Settings\nTerminal Type	(ANSI)\nBits per second	(115200)\nData Bits	(0)\nParity	(None)\nStop Bits	(1)\nFlow Control	(None)\nVT-UTF8 Combo Key Support	(Enabled)\nRecorder Mode	(Disabled)\nResolution 100x31	(Disabled)\nLegacy OS Redirection Resolution	(80x24)\nPutty KeyPad	(VT100)\nRedirection After BIOS POST	(Always Enable)\nEmulation: ANSI: Extended\nASCII char set. VT100: ASCII\nchar set. VT100+: Extends\nVT100 to support color,\nfunction keys, etc. VT-UTF8:\nUses UTF8 encoding to map\nUnicode chars onto 1 or more\nbytes.\n++: Select Screen\nT4: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit](.dex-100-50-1z246-1000-10/433cdd3fc54b9dbc5d5f8da0bbdc1e34e1572b0e1753987693d047de8a4b499d.jpg)

# Terminal Type

Emulation:

ANSI: Extended ASCII char set.

VT100: ASCII char set.

VT100+: Extends VT100 to support color, function keys, etc.

VT-UTF8: Uses UTF8 encoding to map Unicode chars onto 1 or more bytes.

# Bits per second

Selects serial port transmission speed, which must be matched on the other side, where long or noisy lines may require lower speeds.

# Data Bits

Number of data bits

#

Parity bit can be sent with data bits to detect transmission errors, where

Even: parity bit is 0 if the number of 1's in the data bits is even

Odd: parity bit is 0 if number of 1's in the data bits is odd.

Mark: parity bit is always 1.

Space: Parity bit is always 0.

Mark and Space Parity do not allow for error detection, and can be used as an additional data bit.

# Stop Bits

Indicate the end of a serial data packet (a start bit indicates the beginning), with standard setting 1 stop bit, and communication with slow devices may require more than 1 stop bit.

# Flow Control

Can prevent data loss from buffer overflow, where, when sending data, if the receiving buffers are full, a 'stop' signal can be sent to stop the data flow, and once buffers are empty, a Start signal can be sent to re-start the flow. Hardware flow control uses two wires to send start/stop signals.

# VT-UTF8 Combo Key Support

Enables VT-UTF8 Combination Key Support for ANSI/VT100 terminals

# Recorder Mode

When enabled, only text will be sent, to capture terminal data.

# Resolution 100x31

Enables/disables extended terminal resolution

# Legacy OS Redirection Resolution

In legacy OS, the number of rows and columns supporting redirection

# Putty KeyPad

Selects FunctionKey and KeyPad on PuTTY

# Redirection After BIOS Post

When Bootloader is selected, Legacy Console Redirection is disabled before booting to legacy OS.

When Always Enable is selected, Legacy Console Redirection is enabled for legacy OS.

Default is set to Always Enable.

# COM 2

# Console Redirection

Enables/Disables COM 2 console redirection.

# Console Redirection Settings (COM 2)

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc. Advanced</td></tr><tr><td>COM2Console Redirection SettingsTerminal Type [ANSI]Bits per second [115200]Data Bits [8]Parity [None]Stop Bits [1]Flow Control [None]VT-UTF8 Combo Key Support [Enabled]Recorder Mode [Disabled]Resolution 100x31 [Disabled]Legacy OS Redirection Resolution [80x24]Putty KeyPad [VT100]Redirection After BIOS POST [Always Enable]</td><td>Emulation: ANSI: ExtendedASCII char set. VT100: ASCIIchar set. VT100+: ExtendsVT100 to support color,function keys, etc. VT-UTF8:Uses UTF8 encoding to mapUnicode chars onto 1 or morebytes.++: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF8: Previous ValuesF9: Optimized DefaultsF10: Save &amp; ExitESC: Exit</td></tr><tr><td colspan="2">Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.</td></tr></table>

# Terminal Type

Emulation:

ANSI: Extended ASCII char set.

VT100: ASCII char set.

VT100+: Extends VT100 to support color, function keys, etc.

VT-UTF8: Uses UTF8 encoding to map Unicode chars onto 1 or more bytes.

# Bits per second

Selects serial port transmission speed, which must be matched on the other side, where long or noisy lines may require lower speeds.

# Data Bits

Number of data bits

#

Parity bit can be sent with data bits to detect transmission errors, where

Even: parity bit is 0 if the number of 1's in the data bits is even

Odd: parity bit is 0 if number of 1's in the data bits is odd.

Mark: parity bit is always 1.

Space: Parity bit is always 0.

Mark and Space Parity do not allow for error detection, and can be used as an additional data bit.

# Stop Bits

Indicate the end of a serial data packet (a start bit indicates the beginning), with standard setting 1 stop bit, and communication with slow devices may require more than 1 stop bit.

# Flow Control

Can prevent data loss from buffer overflow, where, when sending data, if the receiving buffers are full, a 'stop' signal can be sent to stop the data flow, and once buffers are empty, a Start signal can be sent to re-start the flow. Hardware flow control uses two wires to send start/stop signals.

# VT-UTF8 Combo Key Support

Enables VT-UTF8 Combination Key Support for ANSI/VT100 terminals

# Recorder Mode

When enabled, only text will be sent, to capture terminal data.

# Resolution 100x31

Enables/disables extended terminal resolution

# Legacy OS Redirection Resolution

In legacy OS, the number of rows and columns supporting redirection

# Putty KeyPad

Selects FunctionKey and KeyPad on PuTTY

# Redirection After BIOS Post

When Bootloader is selected, Legacy Console Redirection is disabled before booting to legacy OS.

When Always Enable is selected, Legacy Console Redirection is enabled for legacy OS.

Default is set to Always Enable.

# A.2.4 Advanced Power Management

![Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.\nAdvanced\nAdvanced Power Management\nPower Supply Unit (ATX Mode)\nState After G3 (S0 State)\nRTC Wake system from S5 (Disabled)\nLAN #1 Wake (Disabled)\nLAN #2 Wake (Disabled)\nATX: OS will turn off system\npower when shutdown. NOTE: AT\nmode will not support S3 & S4.\n++: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.](.dex-100-50-1z246-1000-10/b2d38df3b62c3ed4d8f2017f59e6812bf4678109eac0c3f12beae14deba79ea0.jpg)

# Power Supply Unit

ATX: OS will turn off system power when shutdown, where AT mode does not support S3 & S4.

# State After G3

Specifies state to enter when power is re-applied after a power failure (G3 state).

# RTC Wake system from S5

Enables/disables System Wake on alarm event, where selecting FixedTime wakes system at hr::min::sec specified, and Dynamic-Time wakes system at the current time + Increase minute(s) specified

# LAN #1 Wake

Enables/disables onboard Wake on LAN for #1

# LAN #2 Wake

Enables/disables onboard Wake on LAN for #2

# A.2.5 USB Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Advanced</td></tr><tr><td rowspan="2">USB Configuration
XHCI Hand-off [Enabled]
USB Mass Storage Driver Support [Enabled]
USB hardware delays and time-outs:
USB transfer time-out [20 sec]
Device reset time-out [20 sec]
Device power-up delay [Auto]</td><td>This is a workaround for OSes without XHCI hand-off support. The XHCI ownership change should be claimed by XHCI driver.</td></tr><tr><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.</td></tr></table>

# XHCI Hand-off

A workaround for OS without XHCI handoff support, where XHCI ownership change should be claimed by the XHCI driver.

# USB Mass Storage Driver Support

Enables/disables USB mass storage driver support.

# USB transfer time-out

Timeout value for Control, Bulk, and Interrupt transfers.

# Device reset time-out

USB mass storage device Start Unit command timeout.

# Device power-up delay

Maximum time the device will take before reporting to the Host Controller, where Auto uses default value, for a Root port 100 ms, and for a Hub port the delay is taken from the Hub descriptor.

# A.2.6 SATA Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc. Advanced</td></tr><tr><td>SATA Configuration
mSATA [Not Installed]
Port [Enabled]</td><td></td></tr><tr><td>SATA Connector [Not Installed]
Port [Enabled]</td><td></td></tr><tr><td></td><td>Enable or Disable SATA Port</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.</td></tr></table>

# Port

Enables/disables SATA Port

# A.2.7 TPM Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc. Advanced</td></tr><tr><td rowspan="2">TPM Configuration Security Device Support [Disable] NO Security Device Found</td><td>Enables or Disables BIOS support for security device. O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available.</td></tr><tr><td>+: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F8: Previous Values F9: Optimized Defaults F10: Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.</td></tr></table>

# Security Device Support

Enables/disables BIOS support for security device, when enabled, OS will not show the security device, and TCG EFI protocol and INT1A interface will not be available.

# A.2.8 Network Stack Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc. Advanced</td></tr><tr><td rowspan="2">Network Stack Configuration
Network Stack [Disabled]</td><td>Enable/Disable UEFI Network Stack</td></tr><tr><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.</td></tr></table>

# Network Stack

Enables/disables UEFI network stack

# A.2.9 System Management

<table><tr><td>System Management
Version: 1.00
SEMA Firmware
Build Date
SEMA Bootloader
Build Date
▶ SEMA Features
System Health
▶ Temperatures
▶ Power Consumption
▶ Flags
Hardware Controls
▶ Power Up</td><td>SEMA Features</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.</td></tr></table>

Shows SEMA firmware and bootloader versions and build dates.

# SEMA Features

Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.

Advanced

```txt
SEMA Supported Features
Uptime & Power Cycles Counter
System Restart Event
1024 Bytes User-Flash
Watchdog
Temperatures
Voltage Monitor
Power-Up Watchdog
Power Monitor (current sense)
Boot Counter
DTS register available
DTS offset registers programmable
TIVA BMC
PEC protocol
```

```txt
++: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
```

Version 2.18.1263. Copyright (C) 2017 American Megatrends， Inc.

Shows features supported by the SEMA version.

# Temperatures

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc. Advanced</td></tr><tr><td rowspan="2">TemperaturesCPU TemperatureCurrent 64CBoard TemperaturesCurrent 41CSstartup 26CMin 22CMax 56C</td><td></td></tr><tr><td>+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF8: Previous ValuesF9: Optimized DefaultsF10: Save &amp; ExitESC: Exit</td></tr></table>

Shows current CPU temperature, and current, startup, minimum, and maximum board temperatures.

# Power Consumption

<table><tr><td>Power Consumption</td><td></td></tr><tr><td>Current Input Current 0.200A</td><td></td></tr><tr><td>Current Input Power 1.000W</td><td></td></tr><tr><td>VCORE 0.909V</td><td></td></tr><tr><td>VGFX 0.880V</td><td></td></tr><tr><td>V1P05S 1.041V</td><td></td></tr><tr><td>V1P35 1.332V</td><td></td></tr><tr><td>VRTC 3.041V</td><td></td></tr><tr><td>V3P3S 3.303V</td><td></td></tr><tr><td>V3P3A 3.307V</td><td></td></tr><tr><td>VIN 4.989V</td><td></td></tr><tr><td>V1P24A 1.235V</td><td rowspan="3">++: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr><tr><td>V1P8A 1.793V</td></tr><tr><td>V5_SBY 4.965V</td></tr></table>

Shows current input current and power, as well as system voltages.

# Flags

![Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.\nAdvanced\nFlags\nBMC Flags 0x00\nException Code 0x00\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.](.dex-100-50-1z246-1000-10/b3dcf53861e3ac4499c0a456b9f37f172c843c9f837d85aa0c000826acdf88df.jpg)

Shows BMC flags with exception codes.

# Power Up

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc. Advanced</td></tr><tr><td rowspan="2">Power UpPower-Up Watchdog [Disabled]ATTENTION: Pressing F12 during start up disables the Power Up Watchdog.</td><td>The Power Up Watchdog resets the system after a certain amount of time after power up.Pressing F12 during start up disables the Power Up Watchdog.</td></tr><tr><td>++: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF8: Previous ValuesF9: Optimized DefaultsF10: Save &amp; ExitESC: Exit</td></tr></table>

Lists Power-Up Watchdog status.

# A.2.10 Miscellaneous

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc. Advanced</td></tr><tr><td>Miscellaneous OS Selection [Windows]</td><td>Select the target OS.</td></tr><tr><td></td><td>+: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F8: Previous Values F9: Optimized Defaults F10: Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.</td></tr></table>

# OS Selection

Allows selection of active OS.

# A.2.11 Intel® I210 Gigabit Network Connection

<table><tr><td colspan="2">NIC Configuration</td><td rowspan="9">Click to configure the network device port.</td></tr><tr><td>Blink LEDs</td><td>0</td></tr><tr><td>UEFI Driver</td><td>Intel(R) PRO/1000 6.8...</td></tr><tr><td>Adapter PBA</td><td>000300-000</td></tr><tr><td>Device Name</td><td>Intel(R) I210 Gigabit...</td></tr><tr><td>Chip Type</td><td>Intel i210</td></tr><tr><td>PCI Device ID</td><td>1533</td></tr><tr><td>PCI Address</td><td>03:00:00</td></tr><tr><td>Link Status</td><td>[Disconnected]</td></tr><tr><td>MAC Address</td><td>00:30:64:0A:D7:B1</td><td rowspan="2">+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr><tr><td>Virtual MAC Address</td><td>00:00:00:00:00:00</td></tr></table>

# Blink LEDs

Identifies the physical network port by flashing the associated LED.

# A.2.12 NIC Configuration

![Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.\nAdvanced\nLink Speed (Auto Negotiated)\nWake On LAN (Enabled)\nSpecifies the port speed used\nfor the selected boot protocol.\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.](.dex-100-50-1z246-1000-10/2fc2897e7ff05f586e99bcdf7e55f406280426182dffc5af8b2d755f8849f4ed.jpg)

# Link Speed

Specifies the port speed used for the selected boot protocol.

# Wake On LAN

Enables server power-up using an in-band magic packet.

# A.3 Security

<table><tr><td>Password DescriptionIf ONLY the Administrator&#x27;s password is set,then this only limits access to Setup and isonly asked for when entering Setup.If ONLY the User&#x27;s password is set, then thisis a power on password and must be entered toboot or enter Setup. In Setup the User willhave Administrator rights.The password length must bein the following range:Minimum length 3Maximum length 20Administrator PasswordUser PasswordBIOS Lock [Enabled]Secure Boot menu</td><td>Set Administrator Password+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF8: Previous ValuesF9: Optimized DefaultsF10: Save &amp; ExitESC: Exit</td></tr></table>

![The image displays a white document icon with a folded top-right corner and faint horizontal lines running across it. A large, bold red checkmark is superimposed on the left side of the document.](.dex-100-50-1z246-1000-10/ffa5e5d13e59e2f405034e4c0525c87fbde87fe6525221e376cac89f06432822.jpg)
NOTE:

If only the Administrator’s password is set, only access to Setup is limited and authorization requested only when entering Setup. If only the User’s password is set, a password must be entered to boot or enter setup. In Setup the user has Administrator rights.

# Administrator Password

Sets Administrator password.

# User Password

Sets User password.

# BIOS Lock

Enables/disable SC BIOS Lock, which must be enabled to ensure SMM flash protection.

# A.3.1 Secure Boot

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.</td></tr><tr><td>Security</td><td></td></tr><tr><td>Secure Boot</td><td rowspan="4">Secure Boot activated when Platform Key(PK) is enrolled, System mode is User/Deployed, and CSM function is disabled</td></tr><tr><td>System ModeUser</td></tr><tr><td>Secure BootNot Active</td></tr><tr><td>Secure Boot Control[Disabled]</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.</td></tr></table>

Shows System Mode and Secure Boot status.

![The image displays a document icon featuring a white page with a folded upper-left corner and faint horizontal lines running across the bottom half. Superimposed over the document is a large, bold, red checkmark that slants upwards from left to right.](.dex-100-50-1z246-1000-10/6d8a166ab411ae7f79a7fff05d1f2296a33f31a9f18fa647e449e5bea20e3b4d.jpg)
NOTE:

Secure Boot is activated when Platform Key (PK) is enrolled, where System Mode is User/Deployed, and CSM function is disabled.

# A.4 Boot

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Main Advanced Security Boot Save &amp; Exit</td></tr><tr><td>Boot Configuration
Setup Prompt Timeout
Bootup NumLock State
Quiet Boot
Fast Boot</td><td>Number of seconds to wait for setup activation key.
65535(0xFFFF) means indefinite waiting.</td></tr><tr><td>Boot Configuration
Boot Option #1
Boot Option #2
Boot Option #3
Boot Option #4
Boot Option #5
Boot Option #6
Boot Option #7
Boot Option #8</td><td>+:- Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr><tr><td>UEFI USB Key Drive BBS Priorities</td><td></td></tr></table>

# Setup Prompt Timeout

Number of seconds to wait for setup activation key, with 65535(0xFFFF) indicating infinite wait.

# Bootup NumLock State

Sets keyboard NumLock status

# Quiet Boot

Enables/disables Quiet Boot option

# Fast Boot

Enables/disables boot with the minimal device initialization required to launch active boot option, with no effect on BBS boot options.

Sets number of seconds to wait for setup activation key.

# Boot Option Priorities

Specifies the priority of boot devices, with all installed boot devices detected during POST and displayed, where selecting Boot Option # specifies the desired boot device.

# A.5 Save & Exit

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.Main Advanced Security Boot Save &amp; Exit</td></tr><tr><td rowspan="2">Save Changes and ExitDiscard Changes and ExitSave Changes and ResetDiscard Changes and ResetSave OptionsSave ChangesDiscard ChangesRestore DefaultsSave as User DefaultsRestore User DefaultsBoot OverrideUEFI: SanDisk, Partition 1Launch EFI Shell from filesystem device</td><td>Exit system setup after saving the changes.</td></tr><tr><td>+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF8: Previous ValuesF9: Optimized DefaultsF10: Save &amp; ExitESC: Exit</td></tr></table>

# Save Changes and Exit

Exits system setup after saving the changes.

# Discard Changes and Exit

Exits system setup without saving any changes.

# Save Changes and Reset

Resets the system after saving changes.

# Discard Changes and Reset

Resets system setup without saving any changes.

# Save Changes

Saves changes to any setup options.

# Discard Changes

Discards changes to any of the setup options.

# Restore Defaults

Restores/loads default values for all setup options.

# Save as User Defaults

Saves changes as User Defaults.

# Restore User Defaults

Restores User Defaults to all setup options.

# Launch EFI Shell from filesystem device

Attempts to launch EFI Shell application (Shell.efi) from one of the available filesystem devices.

This page intentionally left blank.

# Important Safety Instructions

For user safety, please read and follow all instructions, Warnings, Cautions, and Notes marked in this manual and on the associated device before handling/operating the device, to avoid injury or damage.

S'il vous plaît prêter attention stricte à tous les avertissements et mises en garde figurant sur l'appareil , pour éviter des blessures ou des dommages.

 Read these safety instructions carefully
 Keep the User’s Manual for future reference
 Read the Specifications section of this manual for detailed information on the recommended operating environment
 The device can be operated at an ambient temperature of 50ºC;
When installing/mounting or uninstalling/removing device; or when removal of a chassis cover is required for user servicing (See “Getting Started” on page 23.):

 Turn off power and unplug any power cords/cables
 Reinstall all chassis covers before restoring power

 To avoid electrical shock and/or damage to device:

 Keep device away from water or liquid sources
 Keep device away from high heat or humidity
 Keep device properly ventilated (do not block or cover ventilation openings)
 Always use recommended voltage and power source settings
 Always install and operate device near an easily accessible electrical outlet
 Secure the power cord (do not place any object on/over the power cord)
 Only install/attach and operate device on stable surfaces and/or recommended mountings

If the device will not be used for long periods of time, turn off and unplug from its power source

Never attempt to repair the device, which should only be serviced by qualified technical personnel using suitable tools
 A Lithium-type battery may be provided for uninterrupted backup or emergency power.

![A yellow triangular warning sign with a black border and a black exclamation point in the center. Below the triangle, the text reads 'CAUTION:'.](.dex-100-50-1z246-1000-10/5845e0beb32d0f3e24679eacb7611a9c06b686016862aaafad397d0f20f55f17.jpg)

Risk of explosion if battery is replaced with one of an incorrect type; please dispose of used batteries appropriately.

Risque d’explosion si la pile est remplacée par une autre de type incorrect. Veuillez jeter les piles usagées de façon appropriée.

 The device must be serviced by authorized technicians when:

 The power cord or plug is damaged
 Liquid has entered the device interior
 The device has been exposed to high humidity and/or moisture
 The device is not functioning or does not function according to the User’s Manual
 The device has been dropped and/or damaged and/or shows obvious signs of breakage

Disconnect the power supply cord before loosening the thumbscrews and always fasten the thumbscrews with a screwdriver before starting the system up

 It is recommended that the device be installed only in a server room or computer room where access is:

 Restricted to qualified service personnel or users familiar with restrictions applied to the location, reasons therefor, and any precautions required

 Only afforded by the use of a tool or lock and key, or other means of security, and controlled by the authority responsible for the location

If PoE (Power over Ethernet) is enabled for the device, the system can ONLY be deployed indoors. Unless otherwise noted, the PoE system is NOT designed to withstand the rigors of outdoor use.

![Yellow triangular warning sign with black smoke symbol indicating hot weather](.dex-100-50-1z246-1000-10/fcbc923a529d7b06c4469e3c29124170b58cb9a0a1f07f429b208df112ad499b.jpg)

# BURN HAZARD

Touching this surface could result in bodily injury. To reduce risk, allow the surface to cool before touching.

# RISQUE DE BRÛLURES

Ne touchez pas cette surface, cela pourrait entraîner des blessures.

Pour éviter tout danger, laissez la surface refroidir avant de la toucher.

This page intentionally left blank.

# Getting Service

Ask an Expert: http://askanexpert.adlinktech.com

# ADLINK Technology, Inc.

9F, No.166 Jian Yi Road, Zhonghe District

New Taipei City 235, Taiwan

Tel: +886-2-8226-5877

Fax: +886-2-8226-5717

Email: service@adlinktech.com

# Ampro ADLINK Technology, Inc.

5215 Hellyer Avenue, #110

San Jose, CA 95138, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

+1-408-360-0222

Email: info@adlinktech.com

# ADLINK Technology (China) Co., Ltd.

300 Fang Chun Rd., Zhangjiang Hi-Tech Park

Pudong New Area, Shanghai, 201203 China

Tel: +86-21-5132-8988

Fax: +86-21-5132-3588

Email: market@adlinktech.com

# LiPPERT ADLINK Technology GmbH

Hans-Thoma-Strasse 11

D-68163 Mannheim, Germany

Tel: +49-621-43214-0

Fax: +49-621 43214-30

Email: emea@adlinktech.com

Please visit the Contact page at www.adlinktech.com for information on how to contact the ADLINK regional office nearest you:
[🔗 Link to the original document](.dex-100-50-1z246-1000-10/dex-100-50-1z246-1000-10.pdf)