# DLAP-4000 Series

8th/9th Generation Intel® Core™ i7/i5/i3 Processor

Embedded Computer

User's Manual

![Back view of a black ADLINK server chassis with multiple ports and ventilation slots (no visible text or labels)](.dlap-4000-50-1z344-1000-10/68d5df50844e2cb82e118bffbe485fbba20d28db271f1b725e557faef8c11237.jpg)

Manual Rev.: 1.0

Revision Date: Dec. 28, 2020

Part No: 50-1Z344-1000

Revision History

<table><tr><td>Revision</td><td>Release Date</td><td>Description of Change(s)</td></tr><tr><td>1.0</td><td>2020-12-28</td><td>Initial release</td></tr></table>

# Preface

# Copyright © 2020 ADLINK Technology Inc.

This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

# Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

# Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.

![Symbol of a trash bin crossed with two crossed lines and a blank rectangular base (no text or labels)](.dlap-4000-50-1z344-1000-10/e15584e3448f1dfb0882573a9d47a9c2214317724b2a3c879d14e38ec756b72a.jpg)

Battery Labels (for products with battery)

![Symbol of a trash bin crossed out by two diagonal lines (no text or numbers present)](.dlap-4000-50-1z344-1000-10/bb07fbb2927cac49ea0f874a8c2be9397ec8397564b4412cc393be6acaa44e98.jpg)

![Recycling symbol icon with three chasing arrows inside a square frame (no text or labels)](.dlap-4000-50-1z344-1000-10/8b697f98abb54eb5d89223ddeab956c2b2284963919bbf131fe36673b3f5bc8c.jpg)

Li-ion

![RECYCLE\nRBRC\nLi-ion\n1-800.822.8637](.dlap-4000-50-1z344-1000-10/ef04cf7d4cc0d4e35c084fe24bd281bad0cb68939de14ea9961fc82b5f4b36a3.jpg)

![Abstract geometric pattern with interlocking X and Y shapes (no text or symbols)](.dlap-4000-50-1z344-1000-10/4c55c968e41c262ed44356bfbbddee63cca83e8b47914bb3cdda795eececc67e.jpg)

廢電池請回收

# California Proposition 65 Warning

![This image displays a standard warning symbol. It features a yellow equilateral triangle with a thick black border. Centered inside the triangle is a large black exclamation mark.](.dlap-4000-50-1z344-1000-10/6f5b7a8c03c5e8c064bb789f4a70ac55d11733e9ea7ed8afd5611956136b08ab.jpg)

WARNING: This product can expose you to chemicals including acrylamide, arsenic, benzene, cadmium, Tris(1,3-dichloro-2-propyl) phosphate (TDCPP), 1,4- Dioxane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and vinyl materials, which are known to the State of California to cause cancer, and acrylamide, benzene, cadmium, lead, mercury, phthalates, toluene, DEHP, DIDP, DnHP, DBP, BBP, PVC, and vinyl materials, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

# Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

# Conventions

Take note of the following conventions used throughout this manual to make sure that users perform certain tasks and instructions properly.

![The image displays a graphic icon of a document. It features a white rectangular shape with a folded top-left corner and horizontal lines running across the bottom half. A large, bold red checkmark is superimposed diagonally over the document.](.dlap-4000-50-1z344-1000-10/56f647ac0513c2685be867dbf5f181a0e406b960e46770667bd5759f24af5543.jpg)
NOTE:

Additional information, aids, and tips that help users perform tasks.

![The image displays a standard warning sign consisting of a yellow equilateral triangle with a thick black border. Inside the triangle, there is a large, black exclamation mark centered vertically. The sign is set against a white background, with a thin black horizontal line visible at the very top edge.](.dlap-4000-50-1z344-1000-10/7b42985a8078e8bcb068bb6e0b26cdff0d2e3613d09bb81e1271110f4565117e.jpg)
CAUTION:

Information to prevent minor physical injury, component damage, data loss, and/or program corruption when trying to complete a task.

ATTENTION: Informations destinées à prévenir les blessures corporelles mineures, les dommages aux composants, la perte de données et/ou la corruption de programme lors de l'exécution d'une tâche.

![A red triangle pointing upward containing a white exclamation mark.](.dlap-4000-50-1z344-1000-10/db3e0a48d526c57569c5aacd47c56210b023901e8acdc64a0a2ef9f9e12355fc.jpg)
WARNING:

Information to prevent serious physical injury, component damage, data loss, and/or program corruption when trying to complete a specific task.

AVERTISSEMENT: Informations destinées à prévenir les blessures corporelles graves, les dommages aux composants, la perte de données et/ou la corruption de programme lors de l'exécution d'une tâche spécifique.

# Table of Contents

# Preface...... iii

# List of Tables...... vii

# List of Figures ix

# 1 Introduction ...... 1

1.1 Overview.... 1
1.2 Features.... 1
1.3 Packing List 2

# 2 Specifications.... 3

2.1 DLAP-4000 Functional Block Diagram 5
2.2 Display Options.... 6
2.3 Mechanical Dimensions.... 7

# 3 System Layout.... 13

3.1 Front Panel 13
3.2 Internal I/O Connectors.... 22

# 4 Getting Started 27

4.1 Attach AC Power Cord 27
4.2 Mounting the DLAP-4000 28
4.3 Installing 2.5"/3.5" Storage 32
4.4 Installing M.2 Storage 37
4.5 Driver Installation 39

# A Appendix: BIOS Setup 41

A.1 BIOS Setup Menu 41
A.2 Menu Structure 43
A.3 Main Menu 45
A.4 Advanced Menu 46

A.5 Chipset.... 61
A.6 Security.... 70
A.7 Boot 72
A.8 Save & Exit 73

# Important Safety Instructions.... 75

# Consignes de Sécurité Importante 77

# Getting Service 81

# List of Tables

Table 2-1: DLAP-4000 Specifications....3

Table 2-2: Maximum Display Resolutions ...... 6

Table 3-1: Front/Rear Panel I/O Legend 14

Table 3-2: Extended Power Connector Pin Definition ..... 15

Table 3-3: DisplayPort Pin Definition 16

Table 3-4: HDMI Pin Definition 17

Table 3-5: DVI-D Connector Pin Definition 18

Table 3-6: Ethernet Port Pin Definition 19

Table 3-7: Active/Link LED Indicators....19

Table 3-8: D-Sub 9-pin Signal Function of COM Ports....20

Table 3-9: 8-bit GPIO Pin Definition 21

Table 3-10: Mainboard Connector Legend 24

Table 3-11: Clear CMOS (CLCMOS1) 25

This page intentionally left blank.

# List of Figures

Figure 2-1: DLAP-4000 Functional Block Diagram .... 5

Figure 2-2: DLAP-4000 Top View 7

Figure 2-3: DLAP-4000 Right Side View....8

Figure 2-4: DLAP-4000 Left Side View 8

Figure 2-5: DLAP-4000 Bottom View 9

Figure 2-6: DLAP-4000 Rear View....10

Figure 2-7: DLAP-4000 Front View 11

Figure 3-1: Front Panel I/O 13

Figure 3-2: Rear Panel I/O 14

Figure 3-3: Extended Power Connector Pin Definition.... 15

Figure 3-4: DisplayPort Connector Pin Definition....16

Figure 3-5: HDMI Connector Pin Definition....17

Figure 3-6: DVI-D Connector Pin Definition 18

Figure 3-7: Ethernet Port and LEDs....19

Figure 3-8: COM Port Pin Definition....20

Figure 3-9: 8-bit GPIO Connector Pin Definition....21

Figure 3-10: Mainboard Front Connectors....22

Figure 3-11: Mainboard Rear Connectors....23

Figure 4-1: DLAP-4000 Wall-mount Brackets 31

Figure 4-2: Holes for 1st storage (2.5" HDD/SSD)....34

Figure 4-3: Holes for 2nd storage (2.5" HDD/SSD or 3.5" HDD) ..... 34

Figure 4-4: Storage bracket with 2x 2.5" HDD/SSD....35

Figure 4-5: Storage bracket with 2.5" + 3.5" Drives 35

This page intentionally left blank.

# 1 Introduction

# 1.1 Overview

ADLINK's DLAP-4000 Series of embedded computing platforms, incorporating Intel® Core™ i7/i5/i3 processors, provides 2 internal SATA trays, 1 M.2 2280 drive, 1 Mini PCIe slot and 1 PCIe x16 slot optimizing easy maintenance in industrial automation environments with the most compact size and optimized thermal design, accommodating the largest graphic cards. The DLAP-4000 series supports DDR4 memory for more powerful computing and the Intel® HD Graphics 630 speeds graphics performance.

# 1.2 Features

▶ 8th/9th Gen Intel® Core™ i7/i5/i3 FCLGA1151 processor and H310 chipset
▶ 2x DDR4 SODIMM socket, supporting up to 32GB DDR4 2666 SODIMM Module
▶ 1x DisplayPort, 1x HDMI, 1x DVI-D supporting 2 independent displays w/ H310
▶ 6 External USB ports (4x USB 3.0, 2x USB 2.0)
▶ Built-in 8-bit GPIO, 1x RS-232/422/485 and 4x RS-232 ports
▶ Onboard SATA 6Gb/s port for 2.5" HDD/SSD installation, and SATA 6Gb/s
▶ Built-in 100V AC to 240V AC, 300W/500W Flex ATX PSU

# 1.3 Packing List

Before unpacking, check the shipping carton for any damage. If the shipping carton and/or contents are damaged, inform your dealer immediately. Retain the shipping carton and packing materials for inspection. Obtain authorization from your dealer before returning any product to ADLINK. Ensure that the following items are included in the package.

▶ DLAP-4000 Embedded Computer
▶ Accessory Box

▷ US power cord
▷ Wall-mount brackets
▷ Screw pack

# 2 Specifications

<table><tr><td colspan="6">DLAP-4000</td></tr><tr><td colspan="6">System Core</td></tr><tr><td>Processor</td><td colspan="5">► Intel® CoreTM i7-9700E, 2.6GHz, 12M Cache, 65W TDP, LGA1151, DDR4 2666MHz support (8C/8T)► Intel® CoreTM i5-9500E, 3.0GHz, 9M Cache, 65W TDP, LGA1151, DDR4 2666MHz support (6C/6T)► Intel® CoreTM i3-9100E, 3.1GHz, 6M Cache, 65W TDP, LGA1151, DDR4 2666MHz support (4C/4T)► Intel® CoreTM i7-9700TE, 1.8GHz, 12M Cache, 35W TDP, LGA1151, DDR4 2666MHz support (8C/8T)► Intel® CoreTM i5-9500TE, 2.2GHz, 9M Cache, 35W TDP, LGA1151, DDR4 2666MHz support (6C/6T)► Intel® CoreTM i3-9100TE, 2.2GHz, 6M Cache, 35W TDP, LGA1151, DDR4 2666MHz support (4C/4T)► Intel® CoreTM i7-8700, 3.2GHz, 12M Cache, 65W TDP, LGA1151, DDR4 2666MHz support (6C/12T)► Intel® CoreTM i5-8500, 3.0GHz, 9M Cache, 65W TDP, LGA1151, DDR4 2666MHz support (6C/6T)► Intel® CoreTM i3-8100, 3.6GHz, 6M Cache, 65W TDP, LGA1151, DDR4 2400MHz support (4C/4T)► Intel® CoreTM i7-8700T, 2.4GHz 12M Cache, 35W TDP, LGA1151, DDR4 2666MHz support (6C/12T)► Intel® CoreTM i5-8500T, 2.1GHz, 9M Cache, 35W TDP, LGA1151, DDR4 2666MHz support (6C/6T)► Intel® CoreTM i3-8100T, 3.1GHz, 6M Cache, 35W TDP, LGA1151, DDR4 2400MHz support (4C/4T)</td></tr><tr><td>Chipset</td><td colspan="5">Intel® H310 Chipset</td></tr><tr><td>Memory</td><td colspan="5">Non-ECC DDR4 2666/2400MHz, 2x SO-DIMM, up to 32GB (dependent on CPU) system memory</td></tr><tr><td>PEG Card Support</td><td>NVIDIA® Quadro® P2200</td><td>NVIDIA® Quadro® RTX 4000</td><td>NVIDIA® Quadro® RTX 5000</td><td>NVIDIA® Quadro® RTX 6000</td><td>NVIDIA® Quadro® RTX 8000</td></tr></table>

Table 2-1: DLAP-4000 Specifications

<table><tr><td colspan="6">DLAP-4000</td></tr><tr><td colspan="6">I/O Interface</td></tr><tr><td>Display</td><td colspan="5">1x DVI-D connector (rear), resolution up to 1920 x 1200 @ 60 Hz1x DP connector (rear), resolution up to 4096 x 2304 @ 60 Hz1x HDMI connector (rear) resolution up to 4096 x 2160 @ 30 HzAdditional display output from PEG cards</td></tr><tr><td>Ethernet</td><td colspan="5">2x GbE (Realtek RTL8111G)</td></tr><tr><td>Serial Ports</td><td colspan="5">1x RS-232/422/485, 4x RS-232</td></tr><tr><td>USB</td><td colspan="5">4x USB 3.1 Gen1 ports, 2x USB 2.0 ports</td></tr><tr><td>DIO</td><td colspan="5">1x 8-bit GPIO</td></tr><tr><td>Mini PCIe</td><td colspan="5">1x Mini PCIe slot (USB 2.0 and PCIe x1)</td></tr><tr><td>M.2</td><td colspan="5">1x M.2 M key (SATA 6Gb/s)</td></tr><tr><td>Expansion</td><td colspan="5">1x PCIe x16 slot</td></tr><tr><td>Audio</td><td colspan="5">Mic-in, Line-out, Line-in</td></tr><tr><td>TPM 2.0</td><td colspan="5">Optional</td></tr><tr><td colspan="6">Storage</td></tr><tr><td>2.5&quot; SATA</td><td colspan="5">2x 2.5&quot; SATA 6Gb/s internal drive bays</td></tr><tr><td colspan="6">Mechanical</td></tr><tr><td>Dimensions</td><td colspan="5">220 x 300 x 150 mm (W x D x H)</td></tr><tr><td colspan="6">Power Supply</td></tr><tr><td>AC Input</td><td colspan="5">100V to 240V AC</td></tr><tr><td>Output Rating</td><td>300W</td><td>500W</td><td>500W</td><td>500W</td><td>500W</td></tr><tr><td colspan="6">Environmental</td></tr><tr><td>Operating Temperature</td><td>0°C to 50°C</td><td>0°C to 50°C</td><td>0°C to 40°C</td><td>0°C to 40°C</td><td>0°C to 40°C</td></tr><tr><td>Storage Temperature</td><td colspan="5">-20°C to 60°C</td></tr><tr><td>Humidity</td><td colspan="5">5% to 90%, non-condensing</td></tr><tr><td>Vibration</td><td colspan="5">Operating: 1Grms, 5-500Hz, 3 axes (with 2.5&quot; SSD and PEG card)Non-operating: 2Grms, 5-500Hz, 3 axes</td></tr><tr><td>Shock</td><td colspan="5">Operating: 20G, 11ms duration, half sineNon-operating: 30G, 11ms duration, half sine</td></tr><tr><td>EMC</td><td colspan="5">EN55032/35, EN61000-6-2/-4, CE, FCC Part 15B Class B</td></tr><tr><td>Safety</td><td colspan="5">UL/cUL, CB</td></tr></table>

Table 2-1: DLAP-4000 Specifications

# 2.1 DLAP-4000 Functional Block Diagram

![**Main Components:**\n*   **Top Block:** Intel® Core™ i7/i5/i3 Processor (formerly 'Coffee Lake Refresh') LGA 1151 Socket\n*   **Bottom Block:** Intel® H310 Chipset\n\n**Connections:**\n\n**From Processor:**\n*   **Video Outputs (Left):**\n    *   DP Conn. (1.2) connects via DDI1.\n    *   DVI-D connects via TMDS to a Passive Level Shifter, then via DDI2.\n    *   HDMI Conn. (1.4b) connects via TMDS to an ASM1442K Level Shifter, then via DDI3.\n    *   LVDS connects via CH5711 to eDP.\n*   **Memory & Expansion (Right):**\n    *   Vertical SODIMM DDR4 (non ECC) connects via Channel A.\n    *   Vertical SODIMM DDR4 (non ECC) connects via Channel B.\n    *   PCIe x16 slot connects via PCIe x16.\n*   **To Chipset (Bottom):**\n    *   Connects via Audio (bidirectional).\n    *   Connects via DMI 3.0 (bidirectional).\n\n**From Chipset (Left Side):**\n*   **SPI:** BIOS (256Mb UEFI) and SPI Header connect via SPI.\n*   **Audio:** Rear I/O Conn. x1 (Line-In, Line-Out, Mic-In) and Front Audio header x1 (Line-Out, Mic-In) connect via HDA to an ALC892 (ALC888S) chip, which connects back via HDA.\n*   **LPC:** TPM 2.0 (Optional) SLB9665TT2.0 and LPC Header connect via LPC.\n*   **Super I/O (NCT6106D):**\n    *   RS-232/422/485 DB9 x1 connects via UART1.\n    *   RS232 Header x4 connects via UART2-5.\n    *   CPU Fan x1 and Sys Fan x1 connect via Fan lines.\n    *   All connect to the NCT6106D WDT H/W Monitor block.\n*   **GPIO:** GPIO Header x1 connects via 8-bit GPIO.\n\n**From Chipset (Right Side):**\n*   **Ethernet:**\n    *   PCIe #11 connects via GbE to RTL 8111 G, then via MDIx to RJ-45.\n    *   PCIe #12 connects via PCIe x1 to RTL 8111 G, then via MDIx to RJ-45.\n*   **USB:**\n    *   USB 3.1 #1/#2 connects via USB 3.1 Gen2 (H310: USB 3.1 Gen1) to USB 3.0 Port x2.\n    *   USB 2.0 #1/#2 connects via USB 2.0 to USB 3.0 Port x2.\n    *   USB 3.1 #3/#4 connects via USB 3.1 Gen2 (H310: USB 3.1 Gen1) to USB 3.0 Port x2.\n    *   USB 2.0 #3/#4 connects via USB 2.0 to USB 3.0 Port x2.\n    *   USB 2.0 #7/#8 connects via USB 2.0 to USB 2.0 Header.\n    *   USB 2.0 #10 connects via USB 2.0 to Mini-Pcie.\n*   **SATA/Storage:**\n    *   PCIe #13 connects via SATA #0 to SATA Port 1.\n    *   PCIe #14 connects via SATA #1 to SATA Port 2.\n    *   PCIe #15 connects via SATA #2 to M.2.\n*   **Expansion:**\n    *   PCIe #5 connects via PCIe x1 to Mini-Pcie.](.dlap-4000-50-1z344-1000-10/1049914011c72524da7451543a846cf692a395ded2ea898e0210bacde376bcd1.jpg)

Figure 2-1: DLAP-4000 Functional Block Diagram

# 2.2 Display Options

With computing and graphic performance enhancement from its 8th & 9th Generation Intel processors, the DLAP-4000 controller can support or two independent displays, with configurations as follows.

<table><tr><td></td><td>Port</td><td>Resolution</td></tr><tr><td>Display Option 1</td><td>DisplayPort1</td><td>4096x2304@60Hz</td></tr><tr><td>Display Option 2</td><td>HDMI</td><td>4096x2160@30Hz</td></tr><tr><td>Display Option 3</td><td>DVI-D</td><td>1920x1200@60Hz</td></tr></table>

Table 2-2: Maximum Display Resolutions

# 2.3 Mechanical Dimensions

All dimensions in millimeters (mm).

![301\n12\n220](.dlap-4000-50-1z344-1000-10/4b2a1382c5f4d0031a1fc1fa4baae05e41984434bc67a76fbfd4a0de9ff20c66.jpg)

Figure 2-2: DLAP-4000 Top View

![Technical line drawing of a rectangular enclosure with two side compartments and a central circular pattern (no text or symbols)](.dlap-4000-50-1z344-1000-10/3c62ed2a03c78e0acbc4ed1be2d7ab685a7b39fdc37e9ca5e30d7064941f66cb.jpg)

Figure 2-3: DLAP-4000 Right Side View

![Technical line drawing of a rectangular enclosure with two side recessed vats and a side-mounted bracket (no text or symbols)](.dlap-4000-50-1z344-1000-10/f2a6eef94d35680a4adb6bb5eaf3081db70f6460fa490b8418755a08dd66c44d.jpg)

Figure 2-4: DLAP-4000 Left Side View

![Technical line drawing of a rectangular enclosure with mounting holes and a central vertical component (no text or symbols)](.dlap-4000-50-1z344-1000-10/c83ae3ea1acd82ad1826c06db961b4d8bea000d21ba9c675c3fd463437d95cf7.jpg)

Figure 2-5: DLAP-4000 Bottom View

![Technical diagram of a device rear panel with circular component layout and DIO connector (no text or symbols)](.dlap-4000-50-1z344-1000-10/3d6917db76912b682007c4e0eecc2f5ed347f09ad0a772b6b4aa1475b140de14.jpg)

Figure 2-6: DLAP-4000 Rear View

![ADLINK\nCOM2\nCOM3\nCOM4\nCOM5\n150](.dlap-4000-50-1z344-1000-10/3599fdd6ae0dc6849774f882c465d5c8178cbf896cd758dd45b9d75a5a06f7e1.jpg)

Figure 2-7: DLAP-4000 Front View

This page intentionally left blank.

# 3 System Layout

# 3.1 Front Panel

The DLAP-4000 Series provides the following front panel access features.

![A\nB\nC\nD E F G\nCOM2\nCOM3\nCOM4\nCOM5\nP O N M L K J I H\nADLINK](.dlap-4000-50-1z344-1000-10/da950f0da23239e00c1309f5c997bc9462f69b0b1e9b3fad669efd0035b4c22f.jpg)

Figure 3-1: Front Panel I/O

![Technical diagram of a device rear panel with labeled connectors and internal grid layout, including a DIO connector pin.](.dlap-4000-50-1z344-1000-10/feb8d14878278a4e10e2a3814d0ed61dad99c74681a63a79a03f9db2a6d61fd6.jpg)

Figure 3-2: Rear Panel I/O

<table><tr><td>A</td><td>AC Power Input</td><td>J</td><td>Mic In</td></tr><tr><td>B</td><td>COM Port (RS-232) x4</td><td>K</td><td>COM Port (RS-232/422/485)</td></tr><tr><td>C</td><td>USB 2.0 Type-A x2</td><td>L</td><td>DVI-D</td></tr><tr><td>D</td><td>Reset</td><td>M</td><td>DisplayPort</td></tr><tr><td>E</td><td>Power</td><td>N</td><td>HDMI</td></tr><tr><td>F</td><td>Extended Power Connector</td><td>O</td><td>Gigabit Ethernet x2</td></tr><tr><td>G</td><td>Storage Indicator</td><td>P</td><td>USB 3.0 Type A x4</td></tr><tr><td>H</td><td>Line In</td><td>Q</td><td>8-bit GPIO</td></tr><tr><td>I</td><td>Line Out</td><td colspan="2"></td></tr></table>

Table 3-1: Front/Rear Panel I/O Legend

# 3.1.1 Power Button

The power button is a non-latched push button with a blue LED indicator. System is turned on when the button is depressed, and the power LED lights. If the system hangs, depress the button for 5 seconds to turn off the system completely.

# 3.1.2 Storage Indicator

The Storage Indicator indicates the HDD/SSD operating state. When the storage is active, the LED indicator flashes red.

# 3.1.3 Reset Button

The reset button executes a hard reset for the DLAP-4000.

# 3.1.4 Extended Power Connector

An external connector is provided for the power buttons, with pin definitions as shown.

![1](.dlap-4000-50-1z344-1000-10/e8422b5eba9e11f94f9e4b0d3c9bc14500c0b97cdcbb2ff7f0c14a85a740e790.jpg)

Figure 3-3: Extended Power Connector Pin Definition

<table><tr><td>Pin</td><td>Signal</td><td>Description</td></tr><tr><td>1</td><td>EXT_PWRBTN</td><td>Power switch</td></tr><tr><td>2</td><td>GND</td><td>Ground</td></tr></table>

Table 3-2: Extended Power Connector Pin Definition

# 3.1.5 DisplayPort Connector

The DLAP-4000 provides one DisplayPort connector for connection to an external monitor.

![19\n1\n20\n2](.dlap-4000-50-1z344-1000-10/48ec1949f2f7145a7cfb9ee53aea808f7548e7df33867a87c6d0ea33dfdd7494.jpg)

Figure 3-4: DisplayPort Connector Pin Definition

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>DP1_CON_DP0</td><td>2</td><td>GND</td></tr><tr><td>3</td><td>DP1_CON_DN0</td><td>4</td><td>DP1_CON_DP1</td></tr><tr><td>5</td><td>GND</td><td>6</td><td>DP1_CON_DN1</td></tr><tr><td>7</td><td>DP1_CON_DP2</td><td>8</td><td>GND</td></tr><tr><td>9</td><td>DP1_CON_DN2</td><td>10</td><td>DP1_CON_DP3</td></tr><tr><td>11</td><td>GND</td><td>12</td><td>DP1_CON_DN3</td></tr><tr><td>13</td><td>DP1_HDMI_DNG_DET</td><td>14</td><td>DP_CFG2</td></tr><tr><td>15</td><td>DP1_CON_AUXP</td><td>16</td><td>GND</td></tr><tr><td>17</td><td>DP1_CON_AUXN</td><td>18</td><td>DP1_CON_HPD</td></tr><tr><td>19</td><td>GND</td><td>20</td><td>+3.3V</td></tr></table>

Table 3-3: DisplayPort Pin Definition

# 3.1.6 HDMI Connector

The DLAP-4000 provides one HDMI connector for connection to an external monitor.

![19 17\n3 1\n18\n2](.dlap-4000-50-1z344-1000-10/1cd9106c0de92d0cd4b36c9c401ce62d56e7164f6cfa66d87234d742cf6c0a25.jpg)

Figure 3-5: HDMI Connector Pin Definition

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>HDMI1_CON_DP2</td><td>2</td><td>GND</td></tr><tr><td>3</td><td>HDMI1_CON_DN2</td><td>4</td><td>HDMI1_CON_DP1</td></tr><tr><td>5</td><td>GND</td><td>6</td><td>HDMI1_CON_DN1</td></tr><tr><td>7</td><td>HDMI1_CON_DP0</td><td>8</td><td>GND</td></tr><tr><td>9</td><td>HDMI1_CON_DN0</td><td>10</td><td>HDMI1_CON_CKP</td></tr><tr><td>11</td><td>GND</td><td>12</td><td>HDMI1_CON_CKN</td></tr><tr><td>13</td><td>N/C</td><td>14</td><td>DP_CFG2</td></tr><tr><td>15</td><td>HDMI1_DDC_CLK</td><td>16</td><td>HDMI1_DDC_DATA</td></tr><tr><td>17</td><td>GND</td><td>18</td><td>+5V</td></tr><tr><td>19</td><td>HDMI1_CON_HPD</td><td colspan="2"></td></tr></table>

Table 3-4: HDMI Pin Definition

# 3.1.7 DVI-D Connector

The DLAP-4000 provides one DVI-D connector for connection to an external monitor.

![1 2 3\n24](.dlap-4000-50-1z344-1000-10/f5b1f19bc5102e80a66f8b92b6b5493a181b8ddb63767767aec1f73d5b794460.jpg)

Figure 3-6: DVI-D Connector Pin Definition

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>DVI1_CON_DN2</td><td>9</td><td>DVI1_CON_DN1</td><td>17</td><td>DVI1_CON_DN0</td></tr><tr><td>2</td><td>DVI1_CON_DP2</td><td>10</td><td>DVI1_CON_DP1</td><td>18</td><td>DVI1_CON_DP0</td></tr><tr><td>3</td><td>GND</td><td>11</td><td>GND</td><td>19</td><td>GND</td></tr><tr><td>4</td><td>N/C</td><td>12</td><td>N/C</td><td>20</td><td>N/C</td></tr><tr><td>5</td><td>N/C</td><td>13</td><td>N/C</td><td>21</td><td>N/C</td></tr><tr><td>6</td><td>DVI1_DDC_CLK</td><td>14</td><td>+5V</td><td>22</td><td>GND</td></tr><tr><td>7</td><td>DVI1_DDC_DATA</td><td>15</td><td>GND</td><td>23</td><td>DVI1_CON_CKP</td></tr><tr><td>8</td><td>N/C</td><td>16</td><td>DVI1_B_HPD</td><td>24</td><td>DVI1_CON_CKN</td></tr></table>

Table 3-5: DVI-D Connector Pin Definition

# 3.1.8 USB 2.0 Ports

The DLAP-4000 provides two USB 2.0 ports supporting Type A USB connection on the front panel. All USB ports are compatible with high-speed, full-speed and low-speed USB devices. The DLAP-4000 supports multiple boot devices, including USB flash drive, USB external hard drive, USB floppy, USB CD-ROM and others. The boot priority and boot device can be configured in BIOS.

# 3.1.9 USB 3.1 Ports

The DLAP-4000 provides four USB 3.1 Gen1 ports supporting Type A USB 3.1 connection on the front panel. All USB 3.1 ports are compatible with SuperSpeed Gen2, high-speed, full-speed, and low-speed USB devices.

# 3.1.10 Gigabit Ethernet Ports

Dual 10/100/1000Mbit/s LAN Ethernet controllers based on Realtek RTL8111G, supporting PXE and WOL over both LANs.

![LED1\nLED2\n8\n1](.dlap-4000-50-1z344-1000-10/691d131a841db1356b48bfee9680ddd656a8618d1de9c11e402a4cb116d321f9.jpg)

Figure 3-7: Ethernet Port and LEDs

<table><tr><td>Pin</td><td>10BASE-T100BASE-TX</td><td>1000BASE-T</td></tr><tr><td>1</td><td>TX+</td><td>LAN_MD10+</td></tr><tr><td>2</td><td>TX-</td><td>LAN_MD10-</td></tr><tr><td>3</td><td>RX+</td><td>LAN_MDI1+</td></tr><tr><td>4</td><td>—</td><td>LAN_MDI2+</td></tr><tr><td>5</td><td>—</td><td>LAN_MDI2-</td></tr><tr><td>6</td><td>RX-</td><td>LAN_MDI1-</td></tr><tr><td>7</td><td>—</td><td>LAN_MDI3+</td></tr><tr><td>8</td><td>—</td><td>LAN_MDI3-</td></tr></table>

Table 3-6: Ethernet Port Pin Definition

<table><tr><td colspan="2">LED1 (Link/Activity)</td><td colspan="2">LED2 (Speed)</td></tr><tr><td>Status</td><td>Description</td><td>Status</td><td>Description</td></tr><tr><td>Off</td><td>10 Mb connection</td><td>Off</td><td>No Link</td></tr><tr><td>Orange</td><td>100 Mb connection</td><td>Green</td><td>Linked</td></tr><tr><td>Green</td><td>1 Gb connection</td><td>Blinking</td><td>Data Activity</td></tr></table>

Table 3-7: Active/Link LED Indicators

# 3.1.11 COM Port Connectors

The DLAP-4000 provides five COM ports through D-sub 9-pin connectors. The COM1 port support RS-232/422/485 modes by BIOS setting, while COM2 to COM5 support only RS-232.

![1\n2\n9](.dlap-4000-50-1z344-1000-10/5b25a0394fe3dd5f54f095c5f5b1df2cb7a948bb748e9e88c5e00265bb0c9582.jpg)

Figure 3-8: COM Port Pin Definition

<table><tr><td rowspan="2">Pin</td><td colspan="3">Signal Name</td></tr><tr><td>RS-232</td><td>RS-422</td><td>RS-485</td></tr><tr><td>1</td><td>DCD#</td><td>TXD422-</td><td>485DATA-</td></tr><tr><td>2</td><td>RXD</td><td>TXD422+</td><td>485DATA+</td></tr><tr><td>3</td><td>TXD</td><td>RXD422+</td><td>N/S</td></tr><tr><td>4</td><td>DTR#</td><td>RXD422-</td><td>N/S</td></tr><tr><td>5</td><td>GND</td><td>N/S</td><td>N/S</td></tr><tr><td>6</td><td>DSR#</td><td>N/S</td><td>N/S</td></tr><tr><td>7</td><td>RTS#</td><td>N/S</td><td>N/S</td></tr><tr><td>8</td><td>CTS#</td><td>N/S</td><td>N/S</td></tr><tr><td>9</td><td>RI#</td><td>N/S</td><td>N/S</td></tr></table>

Table 3-8: D-Sub 9-pin Signal Function of COM Ports

# 3.1.12 8-bit GPIO Connector

The DLAP-4000 provides 8-bit GPIO through D-sub 15-pin connectors. Each GPIO can be defined as Input or Output by BIOS settings.

![5\n1\n15\n11](.dlap-4000-50-1z344-1000-10/b558f4688621bdb2058204c195e7cbfd5e479dbda7556a204c04e12dde0bb769.jpg)

Figure 3-9: 8-bit GPIO Connector Pin Definition

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>GPIO0</td><td>2</td><td>GPIO4</td></tr><tr><td>3</td><td>GPIO1</td><td>4</td><td>GPIO5</td></tr><tr><td>5</td><td>GPIO2</td><td>6</td><td>GPIO6</td></tr><tr><td>7</td><td>GPIO3</td><td>8</td><td>GPIO7</td></tr><tr><td>9</td><td>SMBCLK</td><td>10</td><td>SMBDATA</td></tr><tr><td>11</td><td>GND</td><td>12</td><td>+3.3VDC</td></tr><tr><td>13</td><td>N/S</td><td>14</td><td>N/S</td></tr><tr><td>15</td><td>N/S</td><td colspan="2"></td></tr></table>

Table 3-9: 8-bit GPIO Pin Definition

# 3.2 Internal I/O Connectors

# 3.2.1 Mainboard Connector Locations

![A\nB\nC\nD\nE\nF\nG\nH\nI\nJ\nK\nL\nM\nADLINK\nAmITX-CF-I\nRev. Am\nN\nO\nP\nQ\nR\nS\nT](.dlap-4000-50-1z344-1000-10/60eafc35256b21f61f98f76acc42be1483e0596a1938848020e3d9e76e46b514.jpg)

Figure 3-10: Mainboard Front Connectors

![Close-up of a blue printed circuit board with integrated circuits and connectors (no readable text or symbols)](.dlap-4000-50-1z344-1000-10/07b796335c2f67d60fc9f4b56c699a228c4ac2ee6ca6f479f3f1d84aa9d8c427.jpg)

Figure 3-11: Mainboard Rear Connectors

<table><tr><td>A</td><td>ATX Power Connector</td><td>L</td><td>Clear CMOS (CLCMOS1)</td></tr><tr><td>B</td><td>Mini PCIe</td><td>M</td><td>2x DDR4 SODIMM</td></tr><tr><td>C</td><td>Debug Header</td><td>N</td><td>LVDS</td></tr><tr><td>D</td><td>Case Open</td><td>O</td><td>LVDS Inverter Power Connector</td></tr><tr><td>E</td><td>4x COM</td><td>P</td><td>PCIe x16</td></tr><tr><td>F</td><td>8-bit GPIO</td><td>Q</td><td>Front Panel Header</td></tr><tr><td>G</td><td>USB 3.1 Gen 1</td><td>R</td><td>CPU Fan</td></tr><tr><td>H</td><td>USB 2.0 Header</td><td>S</td><td>System Fan</td></tr><tr><td>I</td><td>4x/2x SATA Connector</td><td>T</td><td>Audio Header</td></tr><tr><td>J</td><td>SPI Header</td><td>U</td><td>M.2</td></tr><tr><td>K</td><td>ATX 12V Power Connector</td><td colspan="2"></td></tr></table>

Table 3-10: Mainboard Connector Legend

# 3.2.2 Mini PCIe Connector

The internal Mini PCIe connector (Rev. 1.2) supports full size Mini PCIe cards.

# 3.2.3 SATA Connectors

The SATA connectors support transfers up to 6.0Gb/s (600MB/s).

# 3.2.4 M.2 Connector

The M.2 connector supports an M.2 2280 SATA SSD.

# 3.2.5 Clear CMOS (CLCMOS1)

Upon encountering an abnormal condition preventing the DLAP-4000 from booting, the jumper can clear the BIOS content stored in CMOS and restore default settings. To clear CMOS, short pin #2 to pin #3 for a minimum of 3 seconds, and then remove the jumper to return to normal mode (replace to pins #1 and #2, default).

<table><tr><td>CLCMOS1</td><td>Clear CMOS</td></tr><tr><td>1-2</td><td>Normal (default)</td></tr><tr><td>2-3</td><td>Clear CMOS</td></tr></table>

Table 3-11: Clear CMOS (CLCMOS1)

This page intentionally left blank.

# 4 Getting Started

# 4.1 Attach AC Power Cord

Locate the AC power cord shown below that is included in the Accessory Pack. Insert it into the AC Power Input "A" shown in Figure 3-1 on page 13 and connect it to an AC power source.

![Black cable with two terminal plugs, tied together (no text or symbols visible)](.dlap-4000-50-1z344-1000-10/98f253ff80afda816c69a275556b1958bc7890d96c0e7291b67162665232c50d.jpg)

![The image displays a standard warning sign featuring a red equilateral triangle containing a white exclamation point in the center. Below the triangle, the word 'WARNING:' is printed in bold, black, capital letters on a white background.](.dlap-4000-50-1z344-1000-10/5f9daa2668f9c7bc2ab8557621e183d0db414e9e802e28b8091145c0697e0476.jpg)

Before providing power, ensure the voltage and polarity provided are compatible with the AC input. Improper input voltage and/or polarity can be responsible for system damage.

AVERTISSEMENT: Avant d'alimenter, assurez-vous que la tension et la polarité fournies sont compatibles avec l'entrée CA. Une tension d'entrée et / ou une polarité incorrectes peuvent être responsables de dommages au système.

# 4.2 Mounting the DLAP-4000

# 4.2.1 Install the Wall-mount Brackets

Remove the 4 footpads as indicated by the red circles below and use the 4 M4 6mm screws included in the screw pack to attach the 2 included wall-mount brackets to the chassis.

Retirez les 4 repose-pieds comme indiqué par les cercles rouges ci-dessous et utilisez les 4 vis M4 6 mm incluses dans Accessory Pox pour fixer les 2 supports de montage mural inclus au châssis.

![3D diagram of a computer tower case with labeled ports and connectors, showing internal hardware layout (no text or symbols)](.dlap-4000-50-1z344-1000-10/d22552daa56e125806a38af3e391cc8b41c5a0029f63b44ae96c4b610869c7b2.jpg)

![wall-mount brackets](.dlap-4000-50-1z344-1000-10/5564473e8e3997997eced4a1f5a200a3d27a5381a7ee172aee8a7d7f8a36a6fc.jpg)

# 4.2.2 Mounting the Device / Montage de l'Appareil

Mount the device to a wall using the 4 keyhole openings indicated or the 6 mounting holes circled in red, according to the spacing dimensions of the holes in the bracket as shown in Figure 4-1 DLAP-4000 Wall-mount Brackets.

Montez l'appareil sur un mur à l'aide des 4 ouvertures de trou de serrure en fonction des dimensions d'espacement des trous dans le support, comme indiqué dans Figure 4-1 DLAP-4000 Wall-mount Brackets.

![keyhole openings](.dlap-4000-50-1z344-1000-10/39fb972c4047e6d7c147afdff1c6813c5a0cb824ee30b4984a9608c492fd7b76.jpg)

![325\n345\n10\n20\n40\n110\n160\n200\n220\nØ5.20\nØ5.20\n7.20\nØ10](.dlap-4000-50-1z344-1000-10/03448a957719d0f0c37d2566e0d150967f4c33158bf20f1e811ed87900d2d9d3.jpg)

Figure 4-1: DLAP-4000 Wall-mount Brackets

# 4.3 Installing 2.5"/3.5" Storage

1. Remove the 6 screws indicated and remove the 2 top panels.

![3D rendering of an AULX device chassis showing front panel, ports, and ventilation slots (no text or symbols visible)](.dlap-4000-50-1z344-1000-10/85ae2af63e9dcf08cc8f8fa97c6e0acc18c2d7b08960163f82648882c5b99e97.jpg)

2. Remove the 4 screws indicated and remove the storage bracket from the chassis.

![Storage bracket](.dlap-4000-50-1z344-1000-10/f25e13fa274b853b8b1d65b308821f42c6564f34a69e47943aa9bae4f1cb38c3.jpg)

3. Use M3 4mm screws included in the Screw Pack to attach a 2.5" HDD/SSD, and #6-32 6.35mm screws to attach a 3.5" HDD.

![3D CAD model of a metal bracket with mounting holes and mounting holes, showing mounting points (no text or symbols)](.dlap-4000-50-1z344-1000-10/a2ffda2af90bbade32d8b2753de9fc8f0322e98a1b66bff75f2361f37b703c6a.jpg)

Figure 4-2: Holes for 1st storage (2.5" HDD/SSD)

![3.5' HDD\n2.5' HDD/SSD\n3.5' HDD](.dlap-4000-50-1z344-1000-10/b646a7aa64f6f508495b35eb486df2479b777d0ca51db499dc2bd7dc956634cd.jpg)

Figure 4-3: Holes for 2nd storage (2.5" HDD/SSD or 3.5" HDD)

![1st 2.5' HDD/SSD\n2nd 2.5' HDD/SSD](.dlap-4000-50-1z344-1000-10/d2219d4c596f694fe455188ab2810140a5dc6985df2b45011986e37f0077d94c.jpg)

Figure 4-4: Storage bracket with 2x 2.5" HDD/SSD

![2.5' HDD/SSD\n3.5' HDD](.dlap-4000-50-1z344-1000-10/da093ebe0e2bd3c51f89fc4bf8ba62e708f806fd0de177051f03084bf738c1a9.jpg)

Figure 4-5: Storage bracket with 2.5" + 3.5" Drives

4. Use the 4 screws indicated to attach the storage back to the chassis.

![Internal view of an electronic device showing internal components and connectors (no text or symbols visible)](.dlap-4000-50-1z344-1000-10/e4e8b50b7ca7746e95d9a810cb734dfc9fabd464477b0ffbb5ee8ad8a3dc2512.jpg)

# 4.4 Installing M.2 Storage

1. Remove the screw and cover plate to access the M.2 storage area.

![M2 Cover Plate](.dlap-4000-50-1z344-1000-10/d796e5a0d2780038ae536e520d8a1dbfdcea3035db1fe85e03b8baa25ba053e7.jpg)

2. Use the M3 4mm screw included in the Screw Pack to install an M.2 SSD.

![M3 4mm Screw\nM.2 SSD\nM.2\nZ280\nM key](.dlap-4000-50-1z344-1000-10/50b7baf4c9a671b8269b4c113c6b8ac2ce31b740a3fb85577b2f5b2f496db892.jpg)

# 4.5 Driver Installation

Download the Windows 10 drivers for your system from the product page at https://www.adlinktech.com/Products/Industrial\_PCs\_Fanless\_Embedded\_PCs/IPCSystems/DLAP-4000\_Series and install.

The following drivers must be installed:

▶ Chipset
▶ Graphics
▶ Audio
▶ Ethernet
Intel ME
▶ COM Ports
▶ IRST

This page intentionally left blank.

# Appendix A BIOS Setup

BIOS can be configured via a setup utility that is invoked during BIOS boot phase. The BIOS configuration is kept in NVRAM which is the same hardware part as BIOS is stored. All settings will be remained after system is un-powered. In this section, BIOS setup menu will be described.

# A.1 BIOS Setup Menu

The BIOS setup utility is invoked by pressing &lt;ESC&gt; or &lt;DEL&gt; keys. User can change BIOS settings during setup utility runs. A reset of system is required in order to make new settings take effect.

In BIOS setup utility, there are several hot keys are designed for specific purpose. Hot keys are listed as below.

▶ &lt;F1&gt;: General help in setup menu
▶ &lt;F8&gt;: Load previous BIOS values
▶ &lt;F9&gt;: Load BIOS default in setup utility
▶ &lt;F10&gt;: Save & Exit setup utility

# Menu Selection Bar

The Menu Selection Bar is located at the top of the screen. It displays the top level available menus to the user:

▶ Main Menu
▶ Advanced Menu
▶ Chipset Menu
▶ Security Menu
▶ Boot Menu
▶ Save & Exit Menu

# Menu Conventions

The appearance of setup menu listed in this chapter is a sample to describe the item list. It is shown on VT100 terminal via serial console. Followings are the menu conventions.

▶ Using color
The mandatory BIOS setup fields are in black. The BIOS setup fields currently not used are in grey. The display only strings are in black.
▶ Using brackets

Editable menu options are marketed with squares ‘[‘ and ’]’ to distinguish them from display only fields that can’t be modified.

# A.2 Menu Structure

This section presents the six primary menus of the BIOS Setup Utility. Use the following table as a quick reference for the contents of the BIOS Setup Utility. The subsections in this section describe the submenus and setting options for each menu item. The default setting options are presented in bold, and the function of each setting is described in the right hand column of the respective table.

<table><tr><td>Main</td><td>Advanced</td></tr><tr><td>- BIOS Information</td><td>- CPU Configuration ▶</td></tr><tr><td>- Memory Information</td><td>- PCH-FW Configuration ▶</td></tr><tr><td>- Power Type</td><td>- ACPI Settings ▶</td></tr><tr><td>- System Date</td><td>- NCT6106D Super IO Configuration ▶</td></tr><tr><td>- System Time</td><td>- NCT6106D HW Monitor ▶</td></tr><tr><td></td><td>- S5 RTC Wake Settings ▶</td></tr><tr><td></td><td>- Serial Console Redirection ▶</td></tr><tr><td></td><td>- Intel TXT Information ▶</td></tr><tr><td></td><td>- USB Configuration ▶</td></tr><tr><td></td><td>- CSM Configuration ▶</td></tr><tr><td></td><td>- Network Stack Configuration ▶</td></tr></table>

<table><tr><td>Chipset</td><td>Security</td></tr><tr><td>- System Agent (SA) Configuration ▶- PCH-IO Configuration ▶Boot</td><td>- Administrator Password- User Password- Secure Boot ▶Save &amp; Exit</td></tr><tr><td>- Setup Prompt Timeout</td><td>- Save Changes and Exit</td></tr><tr><td>- Bootup NumLock State</td><td>- Discard Changes and Exit</td></tr><tr><td>- Quiet Boot</td><td>- Save Changes and Reset</td></tr><tr><td>- Support Native Priorities</td><td>- Discard Changes and Reset</td></tr><tr><td>- Boot Option #1</td><td>- Save Changes</td></tr><tr><td>- Boot Option #2</td><td>- Discard Changes</td></tr><tr><td>- Boot Option #3</td><td>- Restore Defaults</td></tr><tr><td>- Boot Option #4</td><td>- Launch EFI Shell from filesystem device</td></tr><tr><td>- Boot Option #5</td><td></td></tr><tr><td>- Boot Option #6</td><td></td></tr><tr><td>- Boot Option #7</td><td></td></tr></table>

![The image displays a graphic icon of a white document or piece of paper. The top left corner of the paper is folded down. Faint horizontal gray lines run across the document, resembling a list or form. Superimposed over the paper is a large, thick red checkmark that slants upwards from the bottom left to the top right.](.dlap-4000-50-1z344-1000-10/7683f2ecc080e7ca02f28b4ec6864c90f340c8b89a87b65bcc6ba50d7b5d2257.jpg)
NOTE:

- ▶ indicates a submenu
- Gray text indicates info only
- Bold text indicates a default setting

# A.3 Main Menu

The Main Menu provides read-only information about your system and also allows you to set the System Date and Time. Refer to the tables below for details of the submenus and settings.

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>BIOS Information</td><td></td><td></td></tr><tr><td>BIOS Vendor</td><td>American Megatrends</td><td></td></tr><tr><td>Core Version</td><td>5.13 0.45 x64</td><td></td></tr><tr><td>Compliancy</td><td>UEFI 2.7; PI 1.6</td><td></td></tr><tr><td>Project Version</td><td>AmlTX-CF-I-xxxx_xxxxx</td><td></td></tr><tr><td>Build Date and Time</td><td>Info only</td><td></td></tr><tr><td>Access Level</td><td>Administrator</td><td></td></tr><tr><td>Memory Information</td><td></td><td></td></tr><tr><td>Total Memory</td><td>Info only</td><td></td></tr><tr><td>Memory Frequency</td><td>Info only</td><td></td></tr><tr><td>Power Type</td><td>x Mode</td><td></td></tr><tr><td>System date</td><td>xxx mm/dd/yyyy</td><td>Set the Date. Useto switch between Date elements.</td></tr><tr><td>System Time</td><td>hh:mm:ss</td><td>Set the Time. Useto switch between Time elements.</td></tr></table>

# A.4 Advanced Menu

This menu contains the settings for most of the user interfaces in the system.

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>CPU Configuration</td><td>CPU Configuration Parameters.</td></tr><tr><td>PCH-FW Configuration</td><td>Configure Management Engine Technology Parameters.</td></tr><tr><td>ACPI Setting</td><td>System ACPI Parameters.</td></tr><tr><td>NCT6106D Super IO Configuration</td><td>System Super IO Chip Parameters.</td></tr><tr><td>NCT6106D HW Monitor</td><td>Monitor hardware status.</td></tr><tr><td>S5 RTC Wake Settings</td><td>Enable system to wake from S5 using RTC alarm.</td></tr><tr><td>Serial Port Console Redirection</td><td>Serial Port Console Redirection.</td></tr><tr><td>Intel TXT Information</td><td>Display Intel TXT Information.</td></tr><tr><td>USB Configuration</td><td>USB Configuration Parameters.</td></tr><tr><td>CSM Configuration</td><td>CSM configuration: Enable/Disable, Option ROM execution settings, etc.</td></tr><tr><td>Network Stack Configuration</td><td>Network Stack Setting.</td></tr></table>

# A.4.1 CPU Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>CPU Configuration</td><td></td><td></td></tr><tr><td>Type</td><td>Info only</td><td></td></tr><tr><td>ID</td><td>Info only</td><td></td></tr><tr><td>Speed</td><td>Info only</td><td></td></tr><tr><td>L1 Data Cache</td><td>Info only</td><td></td></tr><tr><td>L1 Instruction Cache</td><td>Info only</td><td></td></tr><tr><td>L2 Cache</td><td>Info only</td><td></td></tr><tr><td>L3 Cache</td><td>Info only</td><td></td></tr><tr><td>L4 Cache</td><td>Info only</td><td></td></tr><tr><td>VMX</td><td>Info only</td><td></td></tr><tr><td>SMX/TXT</td><td>Info only</td><td></td></tr><tr><td>C6DRAM</td><td>DisabledEnabled</td><td>Enabled/Disabled moving of DRAM contents to PRM memory when CPU is in C6 state.</td></tr><tr><td>Software Guard Extensions (SGX)</td><td>DisabledEnabledSoftware Controlled</td><td>Enabled/Disabled Software Guard Extensions (SGX).</td></tr><tr><td>Select Owner EPOCH input type</td><td>No Change in Owner ECOPHsChange to New Random Owner ECOPHsManual User Defined Owner OPCHs</td><td>There are three Owner EPOCH modes (Each EPOCH is 64bit): no change in owner epoch, change to new random owner epoch and manually entered by user. After generating new epoch via ‘Change to New Random Owner EPOCHs’, the selection reverts back to ‘No Change in Owner Epochs’, this is to ensure Epoch stays same.</td></tr><tr><td>Intel (VMX) Virtualization Technology</td><td>DisabledEnabled</td><td>When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology.</td></tr><tr><td>Active Processor Cores</td><td>All12345</td><td>Number of cores to enable in each processor package.</td></tr><tr><td>Hyper-Threading</td><td>DisabledEnabled</td><td>Enabled for Windows and Linux (OS optimized for Hyper-Threading Technology) and Disabled for other OS (OS not optimized for Hyper-Threading Technology)</td></tr><tr><td>Intel Trusted Execution Technology</td><td>DisabledEnabled</td><td>Enable utilization of additional hardware capabilities provided by Intel Trusted Execution Technology.</td></tr><tr><td>Intel SpeedStep</td><td>DisabledEnabled</td><td>Allows more than two frequency ranges to be supported.</td></tr><tr><td>Turbo Mode</td><td>DisabledEnabled</td><td>Enable/Disable processor Turbo Mode (requires Intel Speed Step or Intel Speed Shift to be available and enabled)</td></tr><tr><td>C states</td><td>DisabledEnabled</td><td>Enable/Disable CPU Power Management. Allows CPU to go to C States when it's not 100% utilized.</td></tr><tr><td>Enhanced C-state</td><td>DisabledEnabled</td><td>Enable/Disable C1E. When enabled, CPU will switch to minimum speed when all cores enter C-State.</td></tr><tr><td>Package C state limit</td><td>C0/C1C2C3C6C7C7SC8C9C10Cpu DefaultAuto</td><td>Maximum Package C State Limit Setting. CPU Default: Leaves to Factory default value. Auto: Initializes to deepest available Package C State Limit.</td></tr></table>

# A.4.2 PCH-FW Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>ME Firmware Version</td><td>Info only</td><td></td></tr><tr><td>ME Firmware Mode</td><td>Info only</td><td></td></tr><tr><td>ME Firmware SKU</td><td>Info only</td><td></td></tr><tr><td>ME Firmware Status 1</td><td>Info only</td><td></td></tr><tr><td>ME Firmware Status 2</td><td>Info only</td><td></td></tr><tr><td>ME State</td><td>Enabled</td><td></td></tr><tr><td>ME Lock Control</td><td>LockUnLock</td><td>ME UnLock switch function.Note: This function will automatic recover setting from UnLock to Lock after power-on system.</td></tr></table>

# A.4.3 ACPI Settings

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>ACPI Settings</td><td></td><td></td></tr><tr><td>Enable Hibernation</td><td>DisabledEnabled</td><td>Enable s or Disables System ability to Hibernate (OS/S4 Sleep State). This option may not be effective with some operating systems.</td></tr><tr><td>ACPI Sleep State</td><td>Suspend Disabled S3 (Suspend to RAM)</td><td>Select the highest ACPI sleep state the system will enter when the SUSPEND button is pressed.</td></tr><tr><td>S3 Video Repost</td><td>DisabledEnabled</td><td>Enable or Disable S3 Video Repost.</td></tr><tr><td>PCIE# Wake from S5</td><td>DisabledEnabled</td><td>Enable or disable PCIE to wake the system from S5.</td></tr></table>

A.4.4 NCT6106D Super IO Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>NCT6106D Super IO Configuration</td><td></td><td></td></tr><tr><td>Super IO Chip</td><td>NCT6106D</td><td></td></tr><tr><td>Serial Port 1 Configuration</td><td></td><td>Set Parameters of Serial Port 1.</td></tr><tr><td>Serial Port 2 Configuration</td><td></td><td>Set Parameters of Serial Port 2.</td></tr><tr><td>Serial Port 3 Configuration</td><td></td><td>Set Parameters of Serial Port 3.</td></tr><tr><td>Serial Port 4 Configuration</td><td></td><td>Set Parameters of Serial Port 4.</td></tr><tr><td>Serial Port 5 Configuration</td><td></td><td>Set Parameters of Serial Port 5.</td></tr><tr><td>WatchDog Count Mode</td><td>Second Minute</td><td>WatchDog Count Mode Selection.</td></tr><tr><td>WatchDog TimeOut Value</td><td>0</td><td>Fill WatchDog Timeout Value, 0 means disabled.</td></tr><tr><td>Chassis Opened Warning</td><td>Disabled Enabled</td><td>Select whether to enable Chassis Intrusion Detection. Chassis Intrusion Detection is a utility that can tell whether someone has opened the case (intruded into the chassis). Note: If chassis tamper occurs, you can only enter setup to clear this error.</td></tr><tr><td>ErP/EuP S5 Support</td><td>Disabled Enabled</td><td>Enable/Disable ErP/EuP S5 Support. Note: When MEBx is enable Activate Network Access, this function can not set enable that will cause ME fail on next boot.</td></tr></table>

A.4.4.1 Serial Port 1 Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Serial Port 1Configuration</td><td></td><td></td></tr><tr><td>Serial Port</td><td>DisabledEnabled</td><td>Enable or Disable Serial Port (COM).</td></tr><tr><td>Device Setting</td><td>IO=3F8h; IRQ=4;</td><td></td></tr><tr><td>Change Settings</td><td>AutoIO=3F8h; IRQ=4IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12;IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12;IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12;</td><td>Select optimal settings for Super IO Device.</td></tr><tr><td>COM Mode Select</td><td>RS232RS485 Half DuplexRS422 Full Duplex</td><td>Configure the COM Port Mode.</td></tr></table>

A.4.4.2 Serial Port 2 Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Serial Port 2Configuration</td><td></td><td></td></tr><tr><td>Serial Port</td><td>DisabledEnabled</td><td>Enable or Disable Serial Port (COM).</td></tr><tr><td>Device Setting</td><td>IO=2F8h; IRQ=3;</td><td></td></tr><tr><td>Change Settings</td><td>AutoIO=2F8h; IRQ=3IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12;IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12;IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12;</td><td>Select optimal settings for Super IO Device.</td></tr></table>

# A.4.4.3 Serial Port 3 Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Serial Port 3Configuration</td><td></td><td></td></tr><tr><td>Serial Port</td><td>DisabledEnabled</td><td>Enable or Disable Serial Port (COM).</td></tr><tr><td>Device Setting</td><td>IO=3E8h; IRQ=5;</td><td></td></tr><tr><td>Change Settings</td><td>AutoIO=3E8h; IRQ=5IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12;IO=3E0h; IRQ=3,4,5,6,7,9,10,11,12;IO=2E0h; IRQ=3,4,5,6,7,9,10,11,12;</td><td>Select optimal settings for Super IO Device.</td></tr></table>

# A.4.4.4 Serial Port 4 Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Serial Port 4Configuration</td><td></td><td></td></tr><tr><td>Serial Port</td><td>DisabledEnabled</td><td>Enable or Disable Serial Port (COM).</td></tr><tr><td>Device Setting</td><td>IO=2E8h; IRQ=5;</td><td></td></tr><tr><td>Change Settings</td><td>AutoIO=2E8h; IRQ=5IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12;IO=3E0h; IRQ=3,4,5,6,7,9,10,11,12;IO=2E0h; IRQ=3,4,5,6,7,9,10,11,12;</td><td>Select optimal settings for Super IO Device.</td></tr></table>

A.4.4.5 Serial Port 5 Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Serial Port 4Configuration</td><td></td><td></td></tr><tr><td>Serial Port</td><td>DisabledEnabled</td><td>Enable or Disable Serial Port (COM).</td></tr><tr><td>Device Setting</td><td>IO=2E0h; IRQ=10;</td><td></td></tr><tr><td>Change Settings</td><td>AutoIO=2E0h; IRQ=10IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12;IO=3E0h; IRQ=3,4,5,6,7,9,10,11,12;IO=2E0h; IRQ=3,4,5,6,7,9,10,11,12;</td><td>Select optimal settings for Super IO Device.</td></tr></table>

A.4.5 NCT6106D HW Monitor

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>PC Health Status</td><td></td><td></td></tr><tr><td>Smart Fan</td><td></td><td>Smart Fan Function page.</td></tr><tr><td>SYS temperature</td><td>Info only</td><td></td></tr><tr><td>CPU temperature (PECI)</td><td>Info only</td><td></td></tr><tr><td>SYS_Fan Speed</td><td>Info only</td><td></td></tr><tr><td>CPU_Fan Speed</td><td>Info only</td><td></td></tr><tr><td>VCORE</td><td>Info only</td><td></td></tr><tr><td>+12V</td><td>Info only</td><td></td></tr><tr><td>+5V</td><td>Info only</td><td></td></tr><tr><td>+5VSB</td><td>Info only</td><td></td></tr><tr><td>AVCC</td><td>Info only</td><td></td></tr><tr><td>3VSB</td><td>Info only</td><td></td></tr><tr><td>3VCC</td><td>Info only</td><td></td></tr><tr><td>VBAT</td><td>Info only</td><td></td></tr></table>

# A.4.5.1 Smart Fan

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Smart Fan Function</td><td>Disabled Enabled</td><td>Smart Fan Function Enable/Disable.</td></tr><tr><td>Smart Fan Mode Configuration</td><td></td><td>Smart Fan Mode Configuration.</td></tr></table>

Smart Fan Mode Configuration – SMART FAN IV Mode

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Smart Fan Mode Configuration</td><td></td><td></td></tr><tr><td>SYS Smart Fan Mode</td><td>SMART FAN IV Mode</td><td>SYS Smart Fan Mode.</td></tr><tr><td>FAN Temperature 1</td><td>25</td><td>Input the SYS Smart Fan IV Temperature 1.</td></tr><tr><td>FAN PWM 1</td><td>80</td><td>Input the SYS Smart Fan IV PWM 2 Value.</td></tr><tr><td>FAN Temperature 2</td><td>40</td><td>Input the SYS Smart Fan IV Temperature 2.</td></tr><tr><td>FAN PWM 2</td><td>130</td><td>Input the SYS Smart Fan IV PWM 2 Value.</td></tr><tr><td>FAN Temperature 3</td><td>55</td><td>Input the SYS Smart Fan IV Temperature 3.</td></tr><tr><td>FAN PWM 3</td><td>190</td><td>Input the SYS Smart Fan IV PWM 3 Value.</td></tr><tr><td>FAN Temperature 4</td><td>62</td><td>Input the SYS Smart Fan IV Temperature 4.</td></tr><tr><td>FAN PWM 4</td><td>255</td><td>Input the SYS Smart Fan IV PWM 4 Value.</td></tr><tr><td>FAN Tolerance of Target Temp</td><td>5</td><td>Fan Tolerance of Target Temp.</td></tr><tr><td>FAN Critical Temperature</td><td>90</td><td>Input the SYS Smart IV Critical Temperature.</td></tr><tr><td>FAN Critical Temperature Tolerance</td><td>1</td><td>Input Tolerance of Critical Temperature (Range:0-7).</td></tr><tr><td>CPU Smart Fan Mode</td><td>SMART FAN IV Mode</td><td>CPU Smart Fan Mode.</td></tr><tr><td>FAN Temperature 1</td><td>25</td><td>Input the CPU Smart Fan IV Temperature 1.</td></tr><tr><td>FAN PWM 1</td><td>80</td><td>Input the CPU Smart Fan IV PWM 2 Value.</td></tr><tr><td>FAN Temperature 2</td><td>40</td><td>Input the CPU Smart Fan IV Temperature 2.</td></tr><tr><td>FAN PWM 2</td><td>130</td><td>Input the CPU Smart Fan IV PWM 2 Value.</td></tr><tr><td>FAN Temperature 3</td><td>55</td><td>Input the CPU Smart Fan IV Temperature 3.</td></tr><tr><td>FAN PWM 3</td><td>190</td><td>Input the CPU Smart Fan IV PWM 3 Value.</td></tr><tr><td>FAN Temperature 4</td><td>62</td><td>Input the CPU Smart Fan IV Temperature 4.</td></tr><tr><td>FAN PWM 4</td><td>255</td><td>Input the CPU Smart Fan IV PWM 4 Value.</td></tr><tr><td>FAN Tolerance of Target Temp</td><td>5</td><td>Fan Tolerance of Target Temp.</td></tr><tr><td>FAN Critical Temperature</td><td>90</td><td>Input the CPU Smart IV Critical Temperature.</td></tr><tr><td>FAN Critical Temperature Tolerance</td><td>1</td><td>Input Tolerance of Critical Temperature (Range:0-7).</td></tr></table>

Smart Fan Mode Configuration – Manual Mode

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Smart Fan Mode Configuration</td><td></td><td></td></tr><tr><td>SYS Smart Fan Mode</td><td>Manual Mode</td><td>SYS Smart Fan Mode.</td></tr><tr><td>SYS expect PWM Output Voltage</td><td>255</td><td>SYS Fan expect PWM Output Voltage.</td></tr><tr><td>CPU Smart Fan Mode</td><td>Manual Mode</td><td>SYS Smart CPU Mode.</td></tr><tr><td>CPU expect PWM Output Voltage</td><td>255</td><td>SYS CPU expect PWM Output Voltage.</td></tr></table>

A.4.6 S5 RTC Wake Settings

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Wake System From S5</td><td>Disabled Enabled</td><td>Enable or disable System wake on alarm event.</td></tr></table>

# A.4.7 Serial Port Console Redirection

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>COM1</td><td></td><td></td></tr><tr><td>Console Redirection</td><td>Disabled Enabled</td><td>Console Redirection Enable or Disable.</td></tr><tr><td>Console Redirection Settings</td><td></td><td>The settings specify how the host computer and the remote computer (which the user is using) will exchange data. Both computers should have the same or compatible settings.</td></tr></table>

# A.4.7.1 Console Redirection Settings

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>COM1</td><td></td><td></td></tr><tr><td>Console Redirection Settings</td><td></td><td></td></tr><tr><td>Terminal Type</td><td>VT100VT100+VT-UTF8ANSI</td><td>Emulation: ANSI: Extended ASCII char set. VT100: ASCII char set. VT100+: Extends VT100 to support color, function keys, etc. VT-UTF8: Uses UTF8 encoding to map Unicode.</td></tr><tr><td>Bits per second</td><td>9600192003840057600115200</td><td>Selects serial port transmission speed. The speed must be matched on the other side. Long or noisy lines may require lower speeds.</td></tr><tr><td>Data Bits</td><td>78</td><td>Data Bits.</td></tr><tr><td>Parity</td><td>NoneEvenOddMarkSpace</td><td>A parity bit can be sent with the data bits to detect some transmission errors.</td></tr><tr><td>Stop Bits</td><td>12</td><td>Stop bits indicate the end of a serial data packet.</td></tr><tr><td>Flow Control</td><td>NoneHardware RTS/CTS</td><td>Flow control can prevent data loss from buffer overflow.</td></tr><tr><td>VT-UTF8 Combo Key Support</td><td>DisabledEnabled</td><td>Enable VT-UTF8 Combination Key Support for ANSI/VT100 terminals.</td></tr><tr><td>Recorder Mode</td><td>DisabledEnabled</td><td>With the mode enabled only text will be sent. This is to capture Terminal data.</td></tr><tr><td>Resolution 100x31</td><td>DisabledEnabled</td><td>Enables or disables extended terminal resolution.</td></tr><tr><td>Putty KeyPad</td><td>VT100LINUXXTERMR6SCOESCNVT400</td><td>Select FunctionKey and KeyPad on Putty.</td></tr></table>

# A.4.8 Intel TXT Information

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Intel TXT information</td><td></td><td></td></tr><tr><td>Chipset</td><td>Info only</td><td></td></tr><tr><td>BiosAcm</td><td>Info only</td><td></td></tr><tr><td>CPU Txt</td><td>Info only</td><td></td></tr><tr><td>Error Code</td><td>Info only</td><td></td></tr><tr><td>Class Code</td><td>Info only</td><td></td></tr><tr><td>Major Code</td><td>Info only</td><td></td></tr><tr><td>Minor Code</td><td>Info only</td><td></td></tr></table>

# A.4.9 USB Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>USB Configuration</td><td></td><td></td></tr><tr><td>USB Module Version</td><td>Info only</td><td></td></tr><tr><td>USB Controllers</td><td>Info only</td><td></td></tr><tr><td>USB Devices</td><td>Info only</td><td></td></tr><tr><td>Legacy USB Support</td><td>Disabled Enabled Auto</td><td>Enable/Disable Legacy USB support. AUTO option disables legacy support if no USB devices are connected. DISABLE option will keep SUB devices available only for EFI applications.</td></tr><tr><td>XHCI Hand-Off</td><td>Disabled Enabled</td><td>This is a workaround for OSes without XHCI hand-off support. The XHCI ownership change should be claimed by XHCI driver.</td></tr><tr><td>USB Mass Storage Driver Support</td><td>Disabled Enabled</td><td>Enable/Disable USB Mass Storage Driver Support.</td></tr></table>

A.4.10 CSM Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Compatibility Support Module Configuration</td><td></td><td></td></tr><tr><td>CSM Support</td><td>Disabled Enabled</td><td>Enable/Disable CSM Support.</td></tr><tr><td>CSM16 Module Version</td><td>Info only</td><td></td></tr><tr><td>Option ROM execution</td><td></td><td></td></tr><tr><td>Network</td><td>Do not launch UEFI Legacy</td><td>Controls the execution of UEFI and Legacy PXE OpROM.</td></tr><tr><td>Storage</td><td>Do not launch UEFI Legacy</td><td>Controls the execution of UEFI and Legacy Storage OpROM.</td></tr><tr><td>Video</td><td>Do not launch UEFI Legacy</td><td>Controls the execution of UEFI and Legacy Video OpROM.</td></tr><tr><td>Other PCI device</td><td>Do not launch UEFI Legacy</td><td>Controls the execution of UEFI and Legacy other device OpROM.</td></tr></table>

A.4.11 Network Stack Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Network Stack</td><td>Disabled Enabled</td><td>Enable/Disable UEFI Network Stack.</td></tr><tr><td>Ipv4 PXE Support</td><td>Disabled Enabled</td><td>Enable/Disable IPv4 PXE boot support. If disabled, IPv4 PXE boot support will not be available.</td></tr><tr><td>Ipv6 PXE Support</td><td>Disabled Enabled</td><td>Enable/Disable IPv6 PXE boot support. If disabled, IPv4 PXE boot support will not be available.</td></tr><tr><td>PXE boot wait time</td><td>0</td><td>Wait time in seconds to press ESC key to abort the PXE boot. Use either +/- or numeric keys to set the values.</td></tr><tr><td>Media detect count</td><td>1</td><td>Number of times the presence of media will be checked. Use either +/- or numeric keys to set the values.</td></tr></table>

# A.5 Chipset

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>System Agent (SA) Configuration</td><td></td><td>System Agent(SA) Parameters.</td></tr><tr><td>PCH-IO Configuration</td><td></td><td>PCH Parameters.</td></tr></table>

# A.5.1 System Agent (SA) Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>System Agent (SA) Configuration</td><td></td><td></td></tr><tr><td>SA PCIe Code Version</td><td>Info only</td><td></td></tr><tr><td>VT-d</td><td>Info only</td><td></td></tr><tr><td>Memory Configuration</td><td></td><td>Memory Configuration Parameters</td></tr><tr><td>Graphics Configuration</td><td></td><td>Graphics Configuration</td></tr><tr><td>PEG Port Configuration</td><td></td><td>PEG Port Options</td></tr><tr><td>VT-d</td><td>Disabled Enabled</td><td>VT-d capability</td></tr></table>

A.5.1.1 Memory Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Memory Configuration</td><td>Info only</td><td></td></tr><tr><td>Memory RC Version</td><td>Info only</td><td></td></tr><tr><td>Memory Frequency</td><td>Info only</td><td></td></tr><tr><td>Memory Timings (tCL-tRCD-tRP-tRAS)</td><td>Info only</td><td></td></tr><tr><td>DIMM_A1</td><td>Info only</td><td></td></tr><tr><td>DIMM_B1</td><td>Info only</td><td></td></tr><tr><td>Max TOLUD</td><td>Dynamic1GB1.25GB1.5GB1.75GB2GB2.25GB2.5GB2.75GB3GB3.25GB3GB</td><td>Maximum Value of TOLUD. Dynamic assignment would adjust TOLUD automatically based on largest MMIO length of installed graphic controller.</td></tr></table>

A.5.1.2 Graphics Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Graphics Configuration</td><td></td><td></td></tr><tr><td>Primary Display</td><td>AutoIGFXPEGPCIE</td><td>Select which of IGFX/PEG/PCIE Graphics device should be Primary Display.</td></tr><tr><td>Internal Graphics</td><td>AutoDisabledEnabled</td><td>Keep IGFX enabled based on the setup options.</td></tr><tr><td>PSMI Support</td><td>DisabledEnabled</td><td>PSMI Enable/Disable.</td></tr><tr><td>DVMT Pre-Allocated</td><td>0M32M64M4M8M12M16M20M24M28M32M F736M40M44M48M52M56M</td><td>Select DVMT5.0 Pre-Allocated (Fixed) Total Graphic Memory size used by the Internal Graphics Device.</td></tr><tr><td>DVMT Total Gfx Mem</td><td>128M256MMAX</td><td>Select DVMT5.0 Total Graphic Memory size used by the Internal Graphics Device.</td></tr><tr><td>LCD Control</td><td></td><td>LCD Control</td></tr></table>

LCD Control

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>LCD Control</td><td></td><td></td></tr><tr><td>LVDS Control</td><td>EnabledDisabled</td><td>Enable/Disable LVDS.</td></tr><tr><td>LVDS Panel Type</td><td>640x480@60Hz 18bits Single800x480@60Hz 18bits Single800x600@60Hz 18bits Single1024x768@60Hz 18bits Single1280x1024@60Hz 24bits Dual1366x768@60Hz 18bits Single1440x900@60Hz 24bits Dual1680x1050@60Hz 24bits Dual1920x1080@60Hz 24bits Dual1920x1200@60Hz 24bits Dual</td><td>Select LCD Panel Type.</td></tr><tr><td>LVDS Brightness Control</td><td>255</td><td>Adjust Brightness of LVDS (from 1~225).</td></tr><tr><td>LVDS Back Light PWM Frequency</td><td>200 Hz250 Hz333 Hz500 Hz1K Hz11.6K Hz15.6K Hz23.3K Hz</td><td>Adjust LVDS Back Light PWM Frequency.</td></tr></table>

# A.5.2 PEG Port Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>PEG Port Configuration</td><td></td><td></td></tr><tr><td>PEG 0:1:0</td><td>Not Present</td><td></td></tr><tr><td>Enable Root Port</td><td>Disabled Enabled Auto</td><td>Enable or Disable the Root Port</td></tr><tr><td>Max Link Speed</td><td>Auto Gen1 Gen2 Gen3</td><td>Configure PEG [Bus, Dev, Fun] Max Speed</td></tr><tr><td>PEG0 Hotplug</td><td>Disabled Enabled</td><td>Enable or Disable PCI Express hot plugging.</td></tr><tr><td>Extra Bus Reserved</td><td>0</td><td>Extra bus reserved (0-7) for bridges behind this Root Bridge</td></tr><tr><td>Reserved Memory</td><td>10</td><td>Reserved Memory for this Root Bridge.</td></tr><tr><td>Reserved I/O</td><td>4</td><td>Reserved I/O (4K/8K/12K/16K/20K) Range for this Root Bridge</td></tr><tr><td>Detect Non-Compliance Device</td><td>Disable Enable</td><td>Detect Non-Compliance PCI Express Device in PEG.</td></tr></table>

# A.5.3 PCH-IO Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>PCH-IO Configuration</td><td></td><td></td></tr><tr><td>PCI Express Configuration</td><td></td><td>PCI Express Configuration settings</td></tr><tr><td>SATA and RST Configuration</td><td></td><td>SATA Device Options Settings</td></tr><tr><td>USB Configuration</td><td></td><td>USB Configuration settings</td></tr><tr><td>HD Audio Configuration</td><td></td><td>HD Audio SubsystemConfiguration Settings</td></tr><tr><td>LAN1 Controller</td><td>DisabledEnabled</td><td>Control the PCI Express Root Port.</td></tr><tr><td>LAN1 PXE OpROM</td><td>DisabledEnabled</td><td>Enable or disable boot option for LAN1 Controller.</td></tr><tr><td>LAN2 Controller</td><td>DisabledEnabled</td><td>Control the PCI Express Root Port.</td></tr><tr><td>LAN2 PXE OpROM</td><td>DisabledEnabled</td><td>Enable or disable boot option for LAN2 Controller.</td></tr><tr><td>Restore AC Power Loss</td><td>Power OnPower OffLast State</td><td>Specify what state to go to when power is re-applied after a power failure (G3 state).</td></tr><tr><td>GPIO Group Control</td><td>DisabledEnabled</td><td>Configure the digital GPIO pins.</td></tr><tr><td>GPIO 1 Control</td><td>InputOutputHighOutput Low</td><td>Configure Digital I/O Pin.</td></tr><tr><td>GPIO 2 Control</td><td>InputOutputHighOutput Low</td><td>Configure Digital I/O Pin.</td></tr><tr><td>GPIO 3 Control</td><td>InputOutputHighOutput Low</td><td>Configure Digital I/O Pin.</td></tr><tr><td>GPIO 4 Control</td><td>InputOutputHighOutput Low</td><td>Configure Digital I/O Pin.</td></tr><tr><td>GPIO 5 Control</td><td>InputOutputHighOutput Low</td><td>Configure Digital I/O Pin.</td></tr><tr><td>GPIO 6 Control</td><td>InputOutputHighOutput Low</td><td>Configure Digital I/O Pin.</td></tr><tr><td>GPIO 7 Control</td><td>InputOutputHighOutput Low</td><td>Configure Digital I/O Pin.</td></tr><tr><td>GPIO 8 Control</td><td>InputOutputHighOutput Low</td><td>Configure Digital I/O Pin.</td></tr></table>

A.5.3.1 PCI Express Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>PCI Express Configuration</td><td></td><td></td></tr><tr><td>PCIE Device Initial Delay</td><td>1</td><td>The PCIE device initial delay mini second.</td></tr><tr><td>PCI Express Root Port 5 (Mini-PCIe)</td><td></td><td></td></tr><tr><td>PCI Express Root Port 5 (Mini-PCIe)</td><td>Disabled Enabled</td><td>Control the PCI Express Root Port.</td></tr><tr><td>ASPM 5</td><td>Disabled L0sL1L0sL1Auto</td><td>Set the ASPM Level:Force L0s – Force all links to L0s State Auto – BIOS auto configureDisable – Disables ASPM</td></tr><tr><td>PCIe Speed</td><td>Auto Gen1Gen2Gen3</td><td>Configure PCIe Speed.</td></tr><tr><td>PCI Express Root Port 11 (LAN1)</td><td></td><td></td></tr><tr><td>PCI Express Root Port 12 (LAN2)</td><td></td><td></td></tr></table>

A.5.3.2 SATA Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>SATA Configuration</td><td></td><td></td></tr><tr><td>SATA Controller(s)</td><td>EnabledDisabled</td><td>Enable/Disable SATA Device.</td></tr><tr><td>SATA Mode Selection</td><td>AHCIIntel RST Premium</td><td>Determines how SATA controllers operate.</td></tr><tr><td>Serial ATA Port 1</td><td>Info only</td><td></td></tr><tr><td>Software Preserve</td><td></td><td></td></tr><tr><td>Port 1</td><td>DisabledEnabled</td><td>Enable or Disable SATA Port.</td></tr><tr><td>Serial ATA Port 2</td><td>Info only</td><td></td></tr><tr><td>Software Preserve</td><td></td><td></td></tr><tr><td>Port 2</td><td>DisabledEnabled</td><td>Enable or Disable SATA Port.</td></tr><tr><td>Serial ATA Port 5</td><td>Info only</td><td></td></tr><tr><td>Software Preserve</td><td></td><td></td></tr><tr><td>Port 5</td><td>DisabledEnabled</td><td>Enable or Disable SATA Port.</td></tr></table>

A.5.3.3 USB Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>USB Configuration</td><td></td><td></td></tr><tr><td>XHCI Compliance Mode</td><td>DisabledEnabled</td><td>Options to disable Compliance Mode. Default is to disable Compliance Mode. Change to enabled for Compliance Mode testing.</td></tr><tr><td>USB12 Standby Power</td><td>DisabledEnabled</td><td>Enable/Disable USB Standby Power.</td></tr><tr><td>USB34 Standby Power</td><td>DisabledEnabled</td><td>Enable/Disable USB Standby Power.</td></tr><tr><td>USB78 Standby Power</td><td>DisabledEnabled</td><td>Enable/Disable USB Standby Power.</td></tr></table>

# A.5.3.4 HD Audio Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>HD Audio Configuration</td><td></td><td></td></tr><tr><td>HD Audio</td><td>Disabled Enabled</td><td>Control Detection of the HD-Audio device. Disabled = HAD will be unconditionally disabled. Enabled = HAD will be unconditionally enabled.</td></tr></table>

# A.6 Security

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Administrator Password</td><td></td><td>Set Administrator Password</td></tr><tr><td>User Password</td><td></td><td>Set User Password</td></tr><tr><td>Secure Boot menu</td><td></td><td>Secure Boot configuration</td></tr></table>

# A.6.1 Secure Boot

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>System Mode</td><td></td><td></td></tr><tr><td>Secure Boot</td><td>DisabledEnabled</td><td>Secure Boot feature is Active if Secure Boot is Enabled,Platform Key(PK) is enrolled and the System is in User mode.The mode change requires a platform reset</td></tr><tr><td>Secure Boot Mode</td><td>StandardCustom</td><td>In Custom mode, Secure Boot Policy variables can be configured by a physically present user without full authentication</td></tr><tr><td>Restore Factory Keys</td><td>YesNo</td><td>Force System to User Mode. Install factory default Secure Boot key databases.</td></tr><tr><td>Reset to Setup Mode</td><td>YesNo</td><td>Delete all Secure key databases from NVRAM.</td></tr><tr><td>Key Management</td><td></td><td>Enables expert users to modify Secure Boot Policy variables without full authentication</td></tr></table>

# A.6.1.1 Key Management

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Vendor Keys</td><td>Modified</td><td></td></tr><tr><td>Factory Key Provision</td><td>Disable Enable</td><td>Install factory default Secure Boot keys after the platform reset and while the System is in Setup mode.</td></tr><tr><td>Restore Factory Keys</td><td>YesNo</td><td>Force System to User Mode. Install factory default Secure Boot key databases</td></tr><tr><td>Reset to Setup Mode</td><td>YesNo</td><td>Delete all Secure key databases from NVRAM.</td></tr><tr><td>Export Secure Boot variables</td><td>YesNo</td><td>Copy NVRAM content of Secure Boot variables to files in a root folder on a file system device.</td></tr><tr><td>Enroll Efi Image</td><td>YesNo</td><td>Allow the image to run in Secure Boot mode. Enroll SHA256 Hash certificate of a PE image into Authorized Signature Database (db).</td></tr><tr><td>Device Guard Ready</td><td></td><td></td></tr><tr><td>Remove “UEFI CA” from DB</td><td>YesNo</td><td>Device Guard ready system must not list ‘Microsoft UEFI CA’ Certificate in Authorized Signature database (db).</td></tr><tr><td>Restore DB defaults</td><td>YesNo</td><td>Restore DB variable to factory defaults.</td></tr><tr><td>Secure Boot variable</td><td>Size | Keys | Key Source</td><td></td></tr><tr><td>Platform Key (PA)</td><td>0 | 0 | No Keys</td><td rowspan="6">Enroll Factory Defaults or load certificates from a file:Public key Certificate:EFI_SIGNATURE_LISTEFI_CERT_X509 (DER)EFI_CERT_RSA2048 (bin)EFI_CERT_SHAXXXAuthenticated UEFI VariablesEFI PE/COFF Image (SHA256)Key Source: Factory, External, Mixed</td></tr><tr><td>Key Exchange Keys</td><td>0 | 0 | No Keys</td></tr><tr><td>Authorized Signatures</td><td>0 | 0 | No Keys</td></tr><tr><td>Forbidden Signatures</td><td>0 | 0 | No Keys</td></tr><tr><td>Authorized TimeStamps</td><td>0 | 0 | No Keys</td></tr><tr><td>OsRecovery Signatures</td><td>0 | 0 | No Keys</td></tr></table>

A.7 Boot

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Boot Configuration</td><td></td><td></td></tr><tr><td>Setup Prompt Timeout</td><td>1</td><td>Number of seconds to wait for setup activation key. 65535 (0xFFFF) means indefinite waiting.</td></tr><tr><td>Bootup NumLock State</td><td>On Off</td><td>Select the keyboard NumLock state.</td></tr><tr><td>Quiet Boot</td><td>Disabled Enabled</td><td>Enable or disables Quiet Boot option.</td></tr><tr><td>Support Native Resolution</td><td>Disabled Enabled</td><td>Enable or disable Support Native Resolution.</td></tr><tr><td>Driver Option Priorities</td><td></td><td></td></tr><tr><td>Boot Mode</td><td>LEGACY UEFI</td><td>Automatically set CSM&#x27;s item so LEGACY or UEFI.</td></tr><tr><td>FIXED BOOT ORDER Priorities</td><td></td><td></td></tr><tr><td>Boot Option #1</td><td>Hard Disk</td><td>Set the system boot order</td></tr><tr><td>Boot Option #2</td><td>CD/DVD</td><td>Set the system boot order</td></tr><tr><td>Boot Option #3</td><td>USB Hard Disk</td><td>Set the system boot order</td></tr><tr><td>Boot Option #4</td><td>USB CD/DVD</td><td>Set the system boot order</td></tr><tr><td>Boot Option #5</td><td>USB Key</td><td>Set the system boot order</td></tr><tr><td>Boot Option #6</td><td>USB Floppy</td><td>Set the system boot order</td></tr><tr><td>Boot Option #7</td><td>Network</td><td>Set the system boot order</td></tr></table>

A.8 Save & Exit

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Save Options</td><td></td><td></td></tr><tr><td>Save Changes and Exit</td><td>YesNo</td><td>Exit system setup after saving the changes.</td></tr><tr><td>Discard Changes and Exit</td><td>YesNo</td><td>Exit system setup without saving any changes.</td></tr><tr><td>Save Changes and Reset</td><td>YesNo</td><td>Reset the system after saving the changes.</td></tr><tr><td>Default Options</td><td></td><td></td></tr><tr><td>Restore Defaults</td><td>YesNo</td><td>Restore/Load Default values for all the setup options.</td></tr><tr><td>Boot Override</td><td></td><td></td></tr><tr><td>Launch EFI Shell from filesystem device</td><td></td><td>Attempts to Launch EFI Shell application (Shell.efi) from one of the available filesystem devices.</td></tr></table>

This page intentionally left blank.

# Important Safety Instructions

For user safety, please read and follow all instructions, Warnings, Cautions, and Notes marked in this manual and on the associated device before handling/operating the device, to avoid injury or damage.

▶ Read these safety instructions carefully.
- Keep the User’s Manual for future reference.
▶ Read the Specifications section of this manual for detailed information on the recommended operating environment.
The device can be operated at an ambient temperature of $45^{\circ}$ C with DC input, and $35^{\circ}$ C with adapter input.
It is recommended that the device be installed in Information Technology Rooms that are in accordance with Article 645 of the National Electrical Code and NFPA 75.

▶ To avoid electrical shock and/or damage to device:

▷ Keep device away from water or liquid sources.
▷ Keep device away from high heat or humidity.
▷ Keep device properly ventilated (do not block or cover ventilation openings).
▶ Always use recommended voltage and power source settings.
▶ Always install and operate device near an easily accessible electrical outlet.
- Secure the power cord (do not place any object on/over the power cord).
▶ Only install/attach and operate device on stable surfaces and/or recommended mountings.
The power cord must be connected to a socket or outlet with a ground connection.

▶ If the device will not be used for long periods of time, turn off and unplug from its power source.
▶ Never attempt to repair the device, which should only be serviced by qualified technical personnel using suitable tools.

▶ A Lithium-type battery may be provided for uninterrupted backup or emergency power.

![The image features a yellow triangular warning sign with a black border. Inside the triangle is a large black exclamation point. Below the triangle, the word 'CAUTION:' is printed in black, uppercase letters.](.dlap-4000-50-1z344-1000-10/f2e412a077c22a2e8facf0105e5bc20dcb8b89578ff05ef7b39d0f2bfb919890.jpg)

Risk of explosion if battery is replaced with one of an incorrect type; please dispose of used batteries appropriately.

This equipment is not suitable for use in locations where children are likely to be present.
▶ The device must be serviced by authorized technicians when:

The power cord or plug is damaged
▷ Liquid has entered the device interior
The device has been exposed to high humidity and/or moisture
The device is not functioning or does not function according to the User's Manual
The device has been dropped and/or damaged and/or shows obvious signs of breakage

▶ Disconnect the power supply cord before loosening the thumbscrews and always fasten the thumbscrews with a screwdriver before starting the system up
It is recommended that the device be installed only in a server room or computer room where access is:

▷ Restricted to qualified service personnel or users familiar with restrictions applied to the location, reasons therefor, and any precautions required
▶ Only afforded by the use of a tool or lock and key, or other means of security, and controlled by the authority responsible for the location

![Warning sign depicting steam rising inside a yellow triangle, indicating caution or hazard.](.dlap-4000-50-1z344-1000-10/f4086ea5323ef12961ac951da6caf29d5a2e536c5d1cb2e0d4e7768ba1a4b078.jpg)

# BURN HAZARD

Hot surface! Do not touch! Touching this surface could result in bodily injury. To reduce risk, allow the surface to cool before touching.

# Consignes de Sécurité Importante

S'il vous plaît prêter attention stricte à tous les avertissements et mises en garde figurant sur l'appareil, pour éviter des blessures ou des dommages.

▶ Lisez attentivement ces consignes de sécurité.
▶ Conservez le manuel de l'utilisateur pour pouvoir le consulter ultérieurement.
▶ Lisez la section Spécifications de ce manuel pour des informations détaillées sur l'environnement d'exploitation recommandé.
L'appareil peut être utilisé à une température ambiante de 45°C avec entrée CC pour les série MVP-61; 35°C avec entrée adaptateur pour la série MVP-61.
Il est recommandé d'installer l'appareil dans des salles de technologie de l'information conformes à l'article 645 du National Electrical Code et à la NFPA 75.

Pour éviter les chocs électriques et/ou d'endommager l'appareil:

▷ Tenez l'appareil à l'écart de toute source d'eau ou de liquide.
▷ Tenez l'appareil à l'écart d'une forte chaleur ou d'une humidité élevée.
▶ Maintenez l'appareil correctement ventilé (n'obstruer ou ne couvrez pas les ouvertures de ventilation).
Utilisez toujours les réglages de tension et de source d'alimentation recommandés.
Installez et utilisez toujours l'appareil près d'une prise de courant facilement accessible.
▷ Fixez le cordon d'alimentation (ne placez aucun objet sur le cordon d'alimentation).
Installez/fixez et utilisez l'appareil uniquement sur des surfaces stables et/ou sur les fixations recommandées.
▷ Le cordon d'alimentation doit être connecté à une prise ou à une prise de courant avec mise à la terre.

Si l'appareil ne doit pas être utilisé pendant de longues périodes, éteignez-le et débranchez-le de sa source d'alimentation
N'essayez jamais de réparer l'appareil, qui ne doit être réparé que par un personnel technique qualifié à l'aide d'outils appropriés
Une batterie de type Lithium peut être fournie pour une alimentation de secours ininterrompue ou d'urgence.

![A yellow triangular warning sign featuring a black exclamation point in the center, with the text 'CAUTION:' printed in black capital letters directly below it.](.dlap-4000-50-1z344-1000-10/4afab5b349749fce168ab8193b230c24e847770d021d4f6521b0a3407d512d61.jpg)

ATTENTION: Risque d'explosion si la pile est remplacée par une autre de type incorrect. Veuillez jeter les piles usagées de façon appropriée.

Cet équipement ne convient pas à une utilisation dans des lieux pouvant accueillir des enfants.
L'appareil doit être entretenu par des techniciens agrees lorsque:
▶ Le cordon d'alimentation ou la prise est endommagé(e)
▶ Un liquide a pénétré à l'intérieur de l'appareil.
L'appareil a été exposé à une forte humidité et/ou de la buée.
L'appareil ne fonctionne pas ou ne fonctionne pas selon le manuel de l'utilisateur.
L'appareil est tombé et/ou a été endommagé et/ou présente des signes évidents de dommage.
Débranchez le cordon d'alimentation avant de desserrer les vis à oreilles et serrez toujours les vis à oreilles avec un tournevis avant de mettre le système en marche.
Il est recommandé d'installer l'appareil uniquement dans une salle de serveurs ou une salle informatique où l'accès est:

Réservé au personnel de service qualifié ou aux utilisateurs familiarisés avec les restrictions appliquées à l'emplacement, aux raisons de ces restrictions et toutes les précautions requises
▷ Uniquement autorisé par l'utilisation d'un outil, d'une serrure et d'une clé, ou d'un autre moyen de sécurité, et contrôlé par l'autorité responsable de l'emplacement.

![Yellow triangular warning sign with black smoke symbol indicating hot weather](.dlap-4000-50-1z344-1000-10/8aebbc0c05160bb71c5dee3ccf956d40c87fc2ea66477a9916afa30f51cff940.jpg)

# RISQUE DE BRÛLURES

Partie chaude! Ne touchez pas cette surface, cela pourrait entraîner des blessures. Pour éviter tout danger, laissez la surface refroidir avant de la toucher.

This page intentionally left blank.

# Getting Service

Ask an Expert: http://askanexpert.adlinktech.com

# ADLINK Technology, Inc.

9F, No.166 Jian Yi Road, Zhonghe District

New Taipei City 235, Taiwan

Tel: +886-2-8226-5877

Fax: +886-2-8226-5717

Email: service@adlinktech.com

# Ampro ADLINK Technology, Inc.

5215 Hellyer Avenue, #110

San Jose, CA 95138, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

Fax: +1-408-360-0222

Email: info@adlinktech.com

# ADLINK Technology (China) Co., Ltd.

300 Fang Chun Rd., Zhangjiang Hi-Tech Park

Pudong New Area, Shanghai, 201203 China

Tel: +86-21-5132-8988

Fax: +86-21-5132-3588

Email: market@adlinktech.com

# ADLINK Technology GmbH

Hans-Thoma-Straße 11

D-68163 Mannheim, Germany

Tel: +49-621-43214-0

Fax: +49-621 43214-30

Email: emea@adlinktech.com

Please visit the Contact page at www.adlinktech.com for information on how to contact the ADLINK regional office nearest you:
[🔗 Link to the original document](.dlap-4000-50-1z344-1000-10/dlap-4000-50-1z344-1000-10.pdf)