# DLAP-4100 Series

# User’s Manual

Industrial Mini-ITX System with

14th/13th/12th Gen Intel® Core™ i9/i7/i5/i3 Processors

![Front view of a black ADLINK server chassis with ports and ventilation slots (no readable text or symbols beyond branding)](.dlap-4100-50m-1z344-1000-11/e364174afb779fd300b4f1d41754ac1a9c7e78cf6851968c8a365469dd1dc009.jpg)

Manual Rev.: Rev. 1.1

Revision Date: June 16, 2026

Part Number: 50M-1Z344-1010

# Revision History

<table><tr><td>Revision</td><td>Release Date</td><td>Description of Change(s)</td></tr><tr><td>1.0</td><td>2025-05-27</td><td>Initial release</td></tr><tr><td>1.1</td><td>2026-06-16</td><td>BIOS settings updated</td></tr></table>

# Preface

# Copyright

Copyright 2026 ADLINK Technology, Inc. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

# Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

# Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.

![Symbol of a trash bin crossed with no text or labels, accompanied by a solid black rectangle below (no text or symbols present)](.dlap-4100-50m-1z344-1000-11/4e1b283572e5b767f3f5bd60fdfbf9ec73c69709b266a3db2d5affc399dd6e93.jpg)

Battery Labels (for products with battery)

![Simple line drawing of a trash bin with crossed lines indicating no waste or prohibition (no text or symbols)](.dlap-4100-50m-1z344-1000-11/5fa5f5f0d38f273262c4ba5a770527b013b2629c4000ee3476d6e0b889388ae7.jpg)

![Li-ion](.dlap-4100-50m-1z344-1000-11/ccd7533e12bedb3e40bc5f8b575ac8a8b0a13ebc0904903a9089230deb089fbb.jpg)

![RECYCLE\nRBRC\nLi-ion\n7.800.822.8837](.dlap-4100-50m-1z344-1000-11/09193c80a89b5217fdf3a18f9e337dac10b0d1ac828a4b3b0fef0a505c1726fe.jpg)

![廢電池請回收](.dlap-4100-50m-1z344-1000-11/cb5b2548dea7d1ce73c4e4eb5322952aba09ff067fa7a6fa4f7950ee1946e03c.jpg)

# California Proposition 65 Warning

![A yellow triangular warning sign with a thick black border featuring a black exclamation point in the center.](.dlap-4100-50m-1z344-1000-11/3571eb9a18b377efebbd430b98f82be78ef1af34560416e192debc7d69b71161.jpg)

WARNING: This product can expose you to chemicals including acrylamide, arsenic, benzene, cadmium, Tris(1,3-dichloro-2-propyl)phosphate (TDCPP), 1,4-Dioxane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and vinyl materials, which are known to the State of California to cause cancer, and acrylamide, benzene, cadmium, lead, mercury, phthalates, toluene, DEHP, DIDP, DnHP,

DBP, BBP, PVC, and vinyl materials, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

# Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

# Conventions

Take note of the following conventions used throughout this manual to make sure that users perform certain tasks and instructions properly.

![The image displays an icon of a white document with a folded upper-left corner and faint horizontal lines running across it. A large red checkmark is superimposed over the document.](.dlap-4100-50m-1z344-1000-11/bd63ec17d7ebcea1680d586fff6b1bd8038f9a8eef3677c9eb2fff0295f9648f.jpg)
NOTE:

Additional information, aids, and tips that help users perform tasks.

![A yellow triangular warning sign with a thick black border containing a large black exclamation mark in the center.](.dlap-4100-50m-1z344-1000-11/54cdc98497d609230ee2f0e5ff7bb68ce581509870fba2ec796c2638d1502c0a.jpg)
CAUTION:

Information to prevent minor physical injury, component damage, data loss, and/or program corruption when trying to complete a task.

ATTENTION: Informations destinées à prévenir les blessures corporelles mineures, les dommages aux composants, la perte de données et/ou la corruption de programme lors de l'exécu- tion d'une tâche.

![The image displays a standard warning symbol featuring a red triangle with a white exclamation point in the center, enclosed within a thin black border.](.dlap-4100-50m-1z344-1000-11/d1d67a1e2b858bde9f02faf6c1668578d499ffa7ea0e3ea03b9d0af71f1632cb.jpg)
WARNING:

Information to prevent serious physical injury, component damage, data loss, and/or program corruption when trying to complete a specific task.

AVERTISSEMENT: Informations destinées à prévenir les bles- sures corporelles graves, les dommages aux composants, la perte de données et/ou la corruption de programme lors de l'exécution d'une tâche spécifique.

# Table of Contents

Preface...

List of Figures .... ..vii

List of Tables...... ..vii

1 Introduction....

1.1 Features... .9
1.2 Packing List . .9

2 Specifications .... .11

2.1 Product Specifications.... .11
2.2 Display Options... ..12

3 Functional Block Diagram ..... .13

4 Mechanical Layout ... ..15

4.1 Mechanical Dimensions . .15
4.2 Mainboard Connector Locations . ..18

5 Getting Started... .21
5.1 Mounting the DLAP-4100. ..21
6 System Layout.. .25
6.1 Front Panel I/O Connectors... .25
7 Connector Pinouts and Jumper Settings ...... .27
7.1 Power Button . .27
7.2 Storage Indicator.. .27
7.3 Reset Button . .27
7.4 Extended Power Connector .. .27
7.5 DisplayPort Connector... .27
7.6 HDMI Connector . .28
7.7 USB 2.0 Ports . ..28
7.8 USB 3.1 Ports . .28
7.9 Ethernet Ports. .28
COM Port Connectors. ..29
8-bit GPIO Connector.. .29
SATA Connectors... ..30
Clear CMOS (CLCMOS1).... ..30

8 Driver Installation .............. .31
9 BIOS Settings..... .33

9.1 Menu Structure . ..33
9.2 Main.. ..34
9.3 Advanced.. ..34
9.4 HW Monitor.. ...40
9.5 Security.. ...40
9.6 Boot .. ..41
9.7 Exit.. ...42

# Safety Instructions......... .43

# Getting Services.......... .45

# List of Figures

Figure 1: Block diagram.. ..13

Figure 2: DLAP-4100 top view.. ..15

Figure 3: DLAP-4100 right side view . ..16

Figure 4: DLAP-4100 left side view . ..16

Figure 5: DLAP-4100 rear view . .17

Figure 6: DLAP-4100 front view.. ..17

Figure 7: Mainboard front connectors.. ..18

Figure 9: DLAP-4100 Wall-mount Brackets. ..23

Figure 10: Front panel I/O. .25

Figure 11: Rear panel I/O .25

# List of Tables

Table 1: Maximum display resolutions.. ..12

Table 2: Mainboard connector descriptions. .19

Table 3: Front/rear panel I/O descriptions.. .26

This page intentionally left blank.

# 1 Introduction

ADLINK’s DLAP-4100 Series embedded computing platforms, incorporating 12th, 13th, and 14th Generation Intel® Core™ i9/i7/i5/i3 desktop processors with the Intel® Q670 chipset, provide one DisplayPort, two HDMI ports, 2.5G and 1G Ethernet ports, USB 3.2 Gen 2 and Gen 1 ports, USB 2.0 ports, two 2.5-inch SSD trays, and one PCIe Gen 5 x16 slot. Designed for easy maintenance in industrial automation environments, the system features a compact size and optimized thermal design, and supports the latest graphics cards such as the NVIDIA RTX 6000 ADA.

# Features

• 14/13/12th Gen Intel® Core™ i9/i7/i5/i3 processors and Q670 chipset, up to 65W
• Dual-channel DDR5 4800 MHz memory up to 64 GB
Three independent displays: HDMI 2.0b, HDMI 1.4b, DP 1.4a
Dual GbE ports: 1x 1GbE, 1x 2.5GbE

• Expansion slots: 1x PCIe GEN5 x16, 4x USB 3.2 Gen2, 2x USB 2.0, 1x M.2 B-key, 1x M.2 E-key, 2x M.2 Mkey

# Packing List

Before unpacking, check the shipping carton for any damage. If the shipping carton and/or contents are damaged, inform your dealer immediately. Retain the shipping carton and packing materials for inspection. Obtain authorization from your dealer before returning any product to ADLINK. Ensure that the following items are included in the package.

DLAP-4100 Embedded Computer
Accessory Box
o Wall-mount brackets
o Screw pack

This page intentionally left blank.

# 2 Specifications

Product Specifications

<table><tr><td>Type</td><td colspan="2">Expandable</td></tr><tr><td>Model</td><td colspan="2">DLAP-4100 Series</td></tr><tr><td rowspan="6">System</td><td>GPU</td><td>NVIDIA RTX 4100 Ada</td></tr><tr><td>CPU</td><td>12th/13th/14th GEN Intel® CoreTM i9/i7/i5/i3 Processor, 35W/65W Processor</td></tr><tr><td>Chipset</td><td>Intel® Q670 Chipset</td></tr><tr><td>RAM</td><td>DDR5 4800MHz (up to 64GB), 2x SODIMM</td></tr><tr><td>Storage</td><td>2x 2.5&quot; SATA 6Gb/s drive bays</td></tr><tr><td>OS</td><td>Windows 10/11 IoT LTSC, Ubuntu 22.04</td></tr><tr><td rowspan="10">I/O Interfaces</td><td>Display</td><td>1x DP 1.4a, DP++1x HDMI 2.0b1x HDMI 1.4b</td></tr><tr><td>Ethernet</td><td>1x 2.5GbE Intel i226-V1x GbE Intel i219-LM</td></tr><tr><td>Serial Ports</td><td>2x RS-232/422/485 (DB9 connector)</td></tr><tr><td>USB</td><td>4x USB3.2 Gen22x USB 2.0</td></tr><tr><td>Mini PCIe</td><td>-</td></tr><tr><td>M.2</td><td>1x M.2 2230 E-key (PCIe Gen3 x1)1x M.2 3042/3052 B-key (PCIe Gen3 x1 / USB3)1x M.2 2242 M-key, NVMe/SATA (PCIe Gen3 x4 / SATA)1x M.2 2242/2280 M-Key, NVMe (PCIe Gen3 x4)</td></tr><tr><td>Digital IO</td><td>8-bit GPIO</td></tr><tr><td>Audio</td><td>Line-out, MIC-IN</td></tr><tr><td>TPM 2.0</td><td>Yes</td></tr><tr><td>Expansion slot</td><td>1x PCIe Gen5 x16</td></tr><tr><td rowspan="3">Mechanical</td><td>Dimensions</td><td>230 (W) x 300 (D) x 150 (H) mm</td></tr><tr><td>Mounting</td><td>Wall mount</td></tr><tr><td>Weight</td><td>7kg</td></tr><tr><td rowspan="2">Power Supply</td><td>DC Input</td><td>-</td></tr><tr><td>AC Input</td><td>100-240 AC input (500W)</td></tr><tr><td rowspan="7">Environmental</td><td>Operating Temperature</td><td>-20°C to 50°C</td></tr><tr><td>Storage Temperature</td><td>-40°C to 85°C (-40°F to 185°F)(excl. storage)</td></tr><tr><td>Humidity</td><td>~95% @ 40°C (non-condensing)</td></tr><tr><td>Vibration</td><td>Operating: 1 Grms, random, 5-500 Hz, 3 axes (w/ SSD)</td></tr><tr><td>Operating and Package (NON-OP) shock</td><td>Operating: 20G, half sine 11ms duration (w/SSD)</td></tr><tr><td>EMC</td><td>EN61000-6-4/-2, CE &amp; FCC Class B</td></tr><tr><td>Safety</td><td>UL/cUL, CB</td></tr></table>

# Display Options

With computing and graphic performance enhancement from its 8th & 9th Generation Intel processors, the DLAP-4100 controller can support or two independent displays, with configurations as follows.

Table 1: Maximum display resolutions

<table><tr><td></td><td>Port</td><td>Resolution</td></tr><tr><td>Display Option 1</td><td>DisplayPort 1.4a</td><td>4096 x 2160@60Hz</td></tr><tr><td>Display Option 2</td><td>HDMI 1.4b</td><td>4096x2160@30Hz</td></tr><tr><td>Display Option 3</td><td>HDMI 2.0b</td><td>4096 x 2160@60Hz</td></tr></table>

# 3 Functional Block Diagram

![Based on the provided flowchart, here is an accurate and concise description of the labeled blocks and their connections.\n\n**Labeled Blocks**\n\n*   **Central Processors/Chips:**\n    *   Intel Alder Lake-S & Raptor Lake-S & Raptor Lake-S Refresh Processor LGA-1700\n    *   Intel PCH Q670\n    *   FINTEK F81966\n    *   MCU\n    *   Realtek ALC897\n    *   Realtek ALC122\n    *   ITE IT66318\n    *   Chrontel CH7513\n    *   Intel I219LM\n    *   Intel I226V\n    *   INFINEON SLB9670XQ2.0 TPM\n    *   SP339EER1 -L/TR x2\n    *   SP3243EUE Y-L/TR x2\n\n*   **Connectors & Ports:**\n    *   HDMI Connector (appears twice)\n    *   Display port Connector\n    *   LVDS Connector\n    *   SO-DIMM (appears twice)\n    *   PCIe x16 or x8/x8 Slot\n    *   SATA Port x4\n    *   M.2 Key M1\n    *   M.2 Key M2\n    *   M.2 Key E\n    *   M.2 Key B\n    *   SIM Card\n    *   RJ45 Connector (vPRO)\n    *   RJ45 Connector\n    *   2x USB3.2 Gen2 Connector (appears twice)\n    *   2x USB3.2 Gen1 Header\n    *   2x USB2.0 Connector (appears twice)\n    *   2x USB2.0 Header (appears twice)\n    *   SMBus Header\n    *   LPT/DGIO header\n    *   COM Port x2 RS232/422/482\n    *   COM Port x2 RS232 only\n\n*   **Other Components:**\n    *   BIOS\n    *   Line Out Mic In\n    *   SPDIF\n    *   Front Audio\n    *   CPU FAN x1\n    *   CHA FAN x1\n    *   HW Monitor\n\n**Connections**\n\n*   **Processor (Top Red Block) Connections:**\n    *   Connects to **HDMI Connector** via **HDMI**.\n    *   Connects to **ITE IT66318** via **DDI**.\n    *   **ITE IT66318** connects to **HDMI Connector** via **HDMI**.\n    *   Connects to **Display port Connector** via **DDI**.\n    *   Connects to **Chrontel CH7513** via **DDI**.\n    *   **Chrontel CH7513** connects to **LVDS Connector** via **LVDS/eDP**.\n    *   Connects to **SO-DIMM** (two connections) via **DDR5 4800/5600MHz**.\n    *   Connects to **PCIe x16 or x8/x8 Slot** via **PCIe Gen5**.\n    *   Connects to **Intel PCH Q670** via **DMI**.\n\n*   **Intel PCH Q670 (Middle Red Block) Connections:**\n    *   **Right Side:**\n        *   Connects to **SATA Port x4** via **SATA**.\n        *   Connects to **M.2 Key M1** via **PCIe x4 Gen4**.\n        *   Connects to **M.2 Key M2** via **PCIe x4 Gen3**.\n        *   Connects to **M.2 Key E** via **PCIe x1**, **CNVI**, and **USB2.0**.\n        *   Connects to **M.2 Key B** via **PCIe x1**, **USB3.2 Gen1**, and **USB2.0**.\n        *   **M.2 Key B** connects to **SIM Card** via **SIM**.\n        *   Connects to **INFINEON SLB9670XQ2.0 TPM** (bidirectional).\n        *   Connects to **BIOS** via **SPI**.\n        *   Connects to **SMBus Header** via **SMBus**.\n        *   Connects to **Realtek ALC897** via **HDA**.\n    *   **Left Side:**\n        *   Connects to **2x USB3.2 Gen2 Connector** (two sets) via **2x USB3.2 Gen2** and **2x USB2.0**.\n        *   Connects to **2x USB3.2 Gen1 Header** via **2x USB3.2 Gen1** and **2x USB2.0**.\n        *   Connects to **Intel I219LM** via **PCIe x1**.\n        *   **Intel I219LM** connects to **RJ45 Connector (vPRO)** via **MDI 1G**.\n        *   Connects to **Intel I226V** via **PCIe x1**.\n        *   **Intel I226V** connects to **RJ45 Connector** via **MDI 2.5G**.\n        *   Connects to **2x USB2.0 Connector** (two sets) via **2x USB2.0**.\n        *   Connects to **2x USB2.0 Header** (two sets) via **2x USB2.0**.\n        *   Connects to **MCU** via **SMBus**.\n        *   Connects to **LPT/DGIO header** via **GPIO x4**.\n        *   Connects to **FINTEK F81966** (bidirectional).\n\n*   **Realtek Audio Connections:**\n    *   **Realtek ALC897** connects to **Line Out Mic In**, **SPDIF**, and **Front Audio** (bidirectional).\n    *   **Realtek ALC897** connects to **Realtek ALC122** (bidirectional).\n\n*   **FINTEK F81966 (Bottom Block) Connections:**\n    *   Connects to **LPT/DGIO header** via **LPT/GPIO**.\n    *   Connects to **CPU FAN x1** and **CHA FAN x1** via **FAN**.\n    *   Connects to **HW Monitor** (bidirectional).\n    *   Connects to **SP339EER1 -L/TR x2** via **UART x2**.\n    *   **SP339EER1 -L/TR x2** connects to **COM Port x2 RS232/422/482** (bidirectional).\n    *   Connects to **SP3243EUE Y-L/TR x2** via **UART x4**.\n    *   **SP3243EUE Y-L/TR x2** connects to **COM Port x2 RS232 only** (bidirectional).](.dlap-4100-50m-1z344-1000-11/5d1f2c17b398538680f82052fb4aeed6d5e3f6f38a3e3faaf580751657e39259.jpg)

Figure 1: Block diagram

This page intentionally left blank.

# 4 Mechanical Layout

# 4.1 Mechanical Dimensions

![The image displays a white document icon with a folded upper-right corner. Faint horizontal lines run across the document, simulating text. A large, bold red checkmark is superimposed on the right side of the document.](.dlap-4100-50m-1z344-1000-11/6f88de777fa40e1a502cf6827e8528c86794d2ec7468bea16b4af3a4e4ba6a48.jpg)
NOTE:

All dimensions are in millimeters, unless noted.

![301\n12\n220](.dlap-4100-50m-1z344-1000-11/5dbd07d39f239577bfcf58c8591be3b63d090920acec7b7295dbe881a506b900.jpg)

Figure 2: DLAP-4100 top view

![Technical line drawing of a device casing with two side compartments and a central grid pattern (no text or symbols)](.dlap-4100-50m-1z344-1000-11/fcc2c16f5f2ff5173a1be0e91fa918b2bf734433a13707b4f099a25d331d5f08.jpg)

Figure 3: DLAP-4100 right side view

![Technical line drawing of a rectangular enclosure with two side panes and a side-mounted bracket (no text or symbols)](.dlap-4100-50m-1z344-1000-11/7067481195581d8babdbcbae22330fb760397c5afd4d268db085004d9aa5bd09.jpg)

Figure 4: DLAP-4100 left side view

![ANT1\n88D1\n88D2\nANT4\nANT3\nDIO\nANT2\nANT6\n150](.dlap-4100-50m-1z344-1000-11/f6ded33a699be2272371f987bb26d64fea3e6723cdd92fbeb8673b3926901247.jpg)

Figure 5: DLAP-4100 rear view

![220\nADLINK](.dlap-4100-50m-1z344-1000-11/2551c481135245d99cd7a6c06a0ce5669e236a435c4e631935f6b97277338998.jpg)

Figure 6: DLAP-4100 front view

# Mainboard Connector Locations

![27 28 29 30 31 32-1 32-2 32-3 33 32-4 34 35 36-1 36-2 37 38 39\n1\n2\n3\n4-1\n4-2\nADLINK AmITX-RL-I REV. 1.02\nFCC CE RoHS\n26\n25\n24\n23\n22\n21 20 19 18-2 18-1 17 16 15\n5\n6\n7\n8\n9\n10\n11\n12\n13\n14](.dlap-4100-50m-1z344-1000-11/2f60270fd4858e4505c2a44fefbe1e6867b50356ee51cabf159d6526e221842e.jpg)

Figure 7: Mainboard front connectors

Table 2: Mainboard connector descriptions

<table><tr><td>Item</td><td>Description (Location)</td><td>Item</td><td>Description (Location)</td></tr><tr><td>1</td><td>Digital input/output power select (JGPIO_PWR1)</td><td>22</td><td>3W audio AMP output wafer (SPEAKER1)</td></tr><tr><td>2</td><td>LVDS panel connector (LVDS1)</td><td>23</td><td>Battery connector (BAT1)</td></tr><tr><td>3</td><td>Panel power select (LCD_VCC)(PNL_PWR1)</td><td>24</td><td>USB 2.0 header (USB2_10_11)</td></tr><tr><td>4-1</td><td>DDR5_B1</td><td>25</td><td>USB 3.2 Gen1 header (USB3_4_9)</td></tr><tr><td>4-2</td><td>DDR5_A1</td><td>26</td><td>SIM socket (SIM1)</td></tr><tr><td>5</td><td>Backlight power select (LCD_BLT_VCC) (BKT_PWR1)</td><td>27</td><td>COM port PWR setting jumper (PWR_COM1(For COM Port1))</td></tr><tr><td>6</td><td>CON_LBKLT_CTL voltage level (BLT_PWM2)</td><td>28</td><td>COM port PWR setting jumper (PWR_COM2(For COM Port2))</td></tr><tr><td>7</td><td>Digital input/output default value setting (JGPIO_SET1)</td><td>29</td><td>M.2 M-Key 2242 slot (M2_M2)</td></tr><tr><td>8</td><td>DACC1_PCIE_PWR1</td><td>30</td><td>ESPI header (ESPI1)</td></tr><tr><td>9</td><td>Clear CMOS header (CLRMOS1)</td><td>31</td><td>M.2 B-Key 2242 slot (M2_B1)</td></tr><tr><td>10</td><td>Chassis intrusion header (CI1_2)</td><td>32-1</td><td>SATA3 connectors (SATA3_4)</td></tr><tr><td>11</td><td>PWR_BAT1_SIO_AT1</td><td>32-2</td><td>SATA3 connectors (SATA3_5)</td></tr><tr><td>12</td><td>Brightness control mode (BLT_PWM1)</td><td>32-3</td><td>SATA3 connectors (SATA3_6)</td></tr><tr><td>13</td><td>System panel header (PANEL1)</td><td>32-4</td><td>SATA3 connectors (SATA3_7)</td></tr><tr><td>14</td><td>SMBUS_TEST1</td><td>33</td><td>24-pin ATX power input connector (ATXPWR1)</td></tr><tr><td>15</td><td>PCIe Gen5 x16 slot (PCIE1)</td><td>34</td><td>SATA power output connector (SATA_PWR1)</td></tr><tr><td>16</td><td>CPU FAN connector (+12V) (CPU_FAN1)</td><td>35</td><td>COM port PWR setting jumper (PWR_COM3(For COM Port3))</td></tr><tr><td>17</td><td>Chassis FAN connector (+12V) (CHA_FAN1)</td><td>36-1</td><td>COM port headers COM 4) (RS232)</td></tr><tr><td>18-1</td><td>M.2 M-Key 2242/2280 slot (M2_M1)</td><td>36-2</td><td>COM port headers COM 3) (RS232)</td></tr><tr><td>18-2</td><td>M.2 E-Key 2230 slot (M2_E1)</td><td>37</td><td>Digital input/output pin header (JGPIO1)</td></tr><tr><td>19</td><td>Front panel audio header (HD_AUDIO1)</td><td>38</td><td>Backlight volume control (BLT_VOL1)</td></tr><tr><td>20</td><td>4-pin ATX PWR connector (DC_4PIN1)</td><td>39</td><td>Inverter power control wafer (BLT_PWR1)</td></tr><tr><td>21</td><td>SPDIF header (SPDIF1)</td><td colspan="2"></td></tr></table>

This page intentionally left blank.

# 5 Getting Started

![The image shows a dark red, upward-pointing triangle with rounded corners. Centered inside the triangle is a large white exclamation point.](.dlap-4100-50m-1z344-1000-11/195c1e60db3192bf9a50424abcccec272c2578d74eba84edeb2b10d515f6a48f.jpg)
WARNING:

Before providing power, ensure the voltage and polarity provided are compatible with the AC input. Improper input voltage and/or polarity can be responsible for system damage.

AVERTISSEMENT: Avant d'alimenter, assurez-vous que la tension et la polarité fournies sont compatibles avec l'entrée CA. Une tension d'entrée et / ou une polarité incorrectes peuvent être responsables de dommages au système.

# Mounting the DLAP-4100

# Install the Wall-mount Brackets

Remove the 4 footpads as indicated by the red circles below and use the 4 M4 6mm screws included in the screw pack to attach the 2 included wall-mount brackets to the chassis.

Retirez les 4 repose-pieds comme indiqué par les cercles rouges ci-dessous et utilisez les 4 vis M4 6 mm incluses dans Accessory Pox pour fixer les 2 supports de montage mural inclus au châssis.

![3D rendering of a black server rack with internal components and ventilation slots (no text or symbols visible)](.dlap-4100-50m-1z344-1000-11/3cbf394c80f21582ba405158b2d827afe7391ea30576e1912125d918a4e7d970.jpg)

![wall-mount brackets](.dlap-4100-50m-1z344-1000-11/a80fe4aca3a63e214235b186682ad8c68c829e6b25633fc10bda6892463609b8.jpg)

# Mounting the Device / Montage de l'Appareil

Mount the device to a wall using the 4 keyhole openings indicated or the 6 mounting holes circled in red, according to the spacing dimensions of the holes in the bracket as shown in Figure 7: DLAP-4100 Wall-mount Brackets.

Montez l'appareil sur un mur à l'aide des 4 ouvertures de trou de serrure en fonction des dimensions d'espacement des trous dans le support, comme indiqué dans Figure 7: DLAP-4100 Wall- mount Brackets.

![keyhole openings](.dlap-4100-50m-1z344-1000-11/d963f36c9a259a49ec3681e5c9eacab7f68d679f7324ee90152979f9e68c17a6.jpg)

![220\n160\n110\n40\n20\n35\n10\n35\n7.20\nØ530\nØ520\n10](.dlap-4100-50m-1z344-1000-11/15aeada40838d57c527dd9013e8872f523751fc36a3827bcd8056badd56e168e.jpg)

Figure 8: DLAP-4100 Wall-mount Brackets

This page intentionally left blank.

# 6 System Layout

# Front Panel I/O Connectors

The DLAP-4100 Series provides the following front panel access features.

![A\nB\nC\nD\nE\nADLINK\nF\nG\nH\nI\nJ\nK\nL\nM\nO\nN](.dlap-4100-50m-1z344-1000-11/d1ddbcb59fde315f2595e782fdd8d65ff76af10b7397f016fe862079b6f32a75.jpg)

Figure 9: Front panel I/O

![P\nQ\nANT1\nSSD1\nSSD2\nANT4\nANT3\nDIO\nANT2\nANT5](.dlap-4100-50m-1z344-1000-11/092fa6bcec40f1995ed8fee6d2caa5ae4a1a9f4ed4d81cf84a8f5642f021e46f.jpg)

Figure 10: Rear panel I/O

Table 3: Front/rear panel I/O descriptions

<table><tr><td>A</td><td>AC Power Input</td><td>J</td><td>USB 2.0</td></tr><tr><td>B</td><td>Reset</td><td>K</td><td>LAN2: 2.5GbE</td></tr><tr><td>C</td><td>Power Button</td><td>L</td><td>USB 3.2</td></tr><tr><td>D</td><td>Extended Power Connector</td><td>M</td><td>LAN1: 1GbE</td></tr><tr><td>E</td><td>Storage LED</td><td>N</td><td>Audio: Line-Out</td></tr><tr><td>F</td><td>Ground Screw</td><td>O</td><td>Audio: Mic-in</td></tr><tr><td>G</td><td>COM Ports (RS-232/422/485)</td><td>P</td><td>2.5-inch SSD Tray</td></tr><tr><td>H</td><td>DisplayPort</td><td>Q</td><td>8-bit GPIO</td></tr><tr><td>I</td><td>HDMI</td><td colspan="2"></td></tr></table>

# 7 Connector Pinouts and Jumper Settings

# Power Button

The power button is a non-latching push button with a blue LED indicator. The system turns on when the button is pressed, and the power LED lights up. If the system becomes unresponsive, press and hold the button for 5 seconds to force a complete shutdown.

# Storage Indicator

The Storage Indicator indicates the HDD/SSD operating state. When the storage is active, the LED indicator flashes red.

# Reset Button

The reset button executes a hard reset for the DLAP-4100.

# Extended Power Connector

An external connector is provided for the power buttons, with pin definitions as shown below.

<table><tr><td>Pin</td><td>Signal</td><td>Description</td></tr><tr><td>1</td><td>EXT_PWRBTN</td><td>Power switch</td></tr><tr><td>2</td><td>GND</td><td>Ground</td></tr></table>

![Simple line drawing of a room layout with numbered indicators (1), no text or symbols present.](.dlap-4100-50m-1z344-1000-11/58041cce2e378ee4aeaed38eee9519b90c3cc96f01125d54dad052b6da004070.jpg)

# DisplayPort Connector

The DLAP-4100 provides one DisplayPort 1.4a connector, supporting resolutions up to 4096×2160@60Hz, for connection to an external monitor.

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>DP1_CON_DP0</td><td>2</td><td>GND</td></tr><tr><td>3</td><td>DP1_CON_DN0</td><td>4</td><td>DP1_CON_DP1</td></tr><tr><td>5</td><td>GND</td><td>6</td><td>DP1_CON_DN1</td></tr><tr><td>7</td><td>DP1_CON_DP2</td><td>8</td><td>GND</td></tr><tr><td>9</td><td>DP1_CON_DN2</td><td>10</td><td>DP1_CON_DP3</td></tr><tr><td>11</td><td>GND</td><td>12</td><td>DP1_CON_DN3</td></tr><tr><td>13</td><td>DP1_HDMI_DNG_DET</td><td>14</td><td>DP_CFG2</td></tr><tr><td>15</td><td>DP1_CON_AUXP</td><td>16</td><td>GND</td></tr><tr><td>17</td><td>DP1_CON_AUXN</td><td>18</td><td>DP1_CON_HPD</td></tr><tr><td>19</td><td>GND</td><td>20</td><td>+3.3V</td></tr></table>

![19\n1\n20\n2](.dlap-4100-50m-1z344-1000-11/eda351e503d049964d0557f08bab8c094c16768ac13f55a2e88263e43d65cbdf.jpg)

# HDMI Connector

The DLAP-4100 provides two HDMI 2.0b ports supporting up to 4096×2160 @ 60 Hz, and one HDMI 1.4b port supporting up to 4096×2160 @ 30 Hz, for connection to external monitors.

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>HDMI1_CON_DP2</td><td>2</td><td>GND</td></tr><tr><td>3</td><td>HDMI1_CON_DN2</td><td>4</td><td>HDMI1_CON_DP1</td></tr><tr><td>5</td><td>GND</td><td>6</td><td>HDMI1_CON_DN1</td></tr><tr><td>7</td><td>HDMI1_CON_DP0</td><td>8</td><td>GND</td></tr><tr><td>9</td><td>HDMI1_CON_DN0</td><td>10</td><td>HDMI1_CON_CKP</td></tr><tr><td>11</td><td>GND</td><td>12</td><td>HDMI1_CON_CKN</td></tr><tr><td>13</td><td>N/C</td><td>14</td><td>DP_CFG2</td></tr><tr><td>15</td><td>HDMI1_DDC_CLK</td><td>16</td><td>HDMI1_DDC_DATA</td></tr><tr><td>17</td><td>GND</td><td>18</td><td>+5V</td></tr><tr><td>19</td><td>HDMI1_CON_HPD</td><td colspan="2"></td></tr></table>

![19 17\n3 1\n18\n2](.dlap-4100-50m-1z344-1000-11/f76c98884e0ef3560c68998a70bf2edf3d39f875e89130f6a51d57fb76a47f66.jpg)

# USB 2.0 Ports

The DLAP-4100 provides two USB 2.0 ports with Type-A connectors on the front panel. All USB ports are compatible with high-speed, full-speed, and low-speed USB devices. The DLAP-4100 supports multiple boot devices, including USB flash drives, external USB hard drives, USB floppy drives, USB CD-ROMs, and others. Boot priority and boot devices can be configured in the BIOS.

# USB 3.1 Ports

The DLAP-4100 provides four USB 3.1 Gen 1 Type-A ports on the front panel. All USB 3.1 ports are compatible with SuperSpeed, high-speed, full-speed, and low-speed USB devices.

# Ethernet Ports

LAN1: 10/100/1000/2500 Mbps Ethernet controller based on Intel® i226-LM.

LAN2: 10/100/1000 Mbps Ethernet controller based on Intel® i219-V, with vPro support.

Both support PXE and WOL.

<table><tr><td>Pin</td><td>10BASE-T100BASE-TX</td><td>1000BASE-T</td></tr><tr><td>1</td><td>TX+</td><td>LAN_MDI0+</td></tr><tr><td>2</td><td>TX-</td><td>LAN_MDI0-</td></tr><tr><td>3</td><td>RX+</td><td>LAN_MDI1+</td></tr><tr><td>4</td><td>—</td><td>LAN_MDI2+</td></tr><tr><td>5</td><td>—</td><td>LAN_MDI2-</td></tr><tr><td>6</td><td>RX-</td><td>LAN_MDI1-</td></tr><tr><td>7</td><td>—</td><td>LAN_MDI3+</td></tr><tr><td>8</td><td>—</td><td>LAN_MDI3-</td></tr></table>

![The image is a schematic diagram of an RJ45 connector. At the top, the text reads 'LED1 LED2'. At the bottom, the numbers '8' and '1' are displayed. A line extends from '8' pointing to the leftmost pin inside the connector housing, while another line extends from '1' pointing to the rightmost pin. Two small rectangles above the connector housing align with the LED labels.](.dlap-4100-50m-1z344-1000-11/46c52f8eb360e226797682e5b755897395b06a851bcaa2793b45cc644147d01b.jpg)

LED Behavior

<table><tr><td colspan="4">LAN2 LED Indications</td></tr><tr><td colspan="2">Activity Link LED</td><td colspan="2">Speed LED</td></tr><tr><td>Status</td><td>Description</td><td>Status</td><td>Description</td></tr><tr><td>Off</td><td>No link</td><td>Off</td><td>10Mbps</td></tr><tr><td>On</td><td>Link</td><td>Orange</td><td>100Mbps</td></tr><tr><td>Blinking</td><td>Data activity</td><td>Green</td><td>1Gbps</td></tr></table>

<table><tr><td colspan="4">LAN1 LED Indications</td></tr><tr><td colspan="2">Activity Link LED</td><td colspan="2">Speed LED</td></tr><tr><td>Status</td><td>Description</td><td>Status</td><td>Description</td></tr><tr><td>Off</td><td>No link</td><td>Off</td><td>10Mbps</td></tr><tr><td>On</td><td>Link</td><td>Orange</td><td>100Mbps/1Gbps</td></tr><tr><td>Blinking</td><td>Data activity</td><td>Green</td><td>2.5Gbps</td></tr></table>

# COM Port Connectors

The DLAP-4100 provides two COM ports RS-232/422/485 through D-sub 9-pin connectors.

<table><tr><td rowspan="2">Pin</td><td colspan="3">Signal Name</td></tr><tr><td>RS-232</td><td>RS-422</td><td>RS-485</td></tr><tr><td>1</td><td>DCD#</td><td>TXD422-</td><td>485DATA-</td></tr><tr><td>2</td><td>RXD</td><td>TXD422+</td><td>485DATA+</td></tr><tr><td>3</td><td>TXD</td><td>RXD422+</td><td>N/S</td></tr><tr><td>4</td><td>DTR#</td><td>RXD422-</td><td>N/S</td></tr><tr><td>5</td><td>GND</td><td>GND</td><td>GND</td></tr><tr><td>6</td><td>DSR#</td><td>N/S</td><td>N/S</td></tr><tr><td>7</td><td>RTS#</td><td>N/S</td><td>N/S</td></tr><tr><td>8</td><td>CTS#</td><td>N/S</td><td>N/S</td></tr><tr><td>9</td><td>PWR</td><td>PWR</td><td>PWR</td></tr></table>

![1 2\n9](.dlap-4100-50m-1z344-1000-11/53344f7a82046830be198aa7400f48f8502cea11c098715cb6d7ee617d152056.jpg)

# 8-bit GPIO Connector

The DLAP-4100 provides 8-bit GPIO through D-sub 15-pin connectors. Each GPIO can be defined as Input or Output by BIOS settings.

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>GPIO0</td><td>2</td><td>GPIO4</td></tr><tr><td>3</td><td>GPIO1</td><td>4</td><td>GPIO5</td></tr><tr><td>5</td><td>GPIO2</td><td>6</td><td>GPIO6</td></tr><tr><td>7</td><td>GPIO3</td><td>8</td><td>GPIO7</td></tr><tr><td>9</td><td>SMBCLK</td><td>10</td><td>SMBDATA</td></tr><tr><td>11</td><td>GND</td><td>12</td><td>+3.3VDC</td></tr><tr><td>13</td><td>N/S</td><td>14</td><td>N/S</td></tr><tr><td>15</td><td>N/S</td><td colspan="2"></td></tr></table>

![5\n1\n15\n11](.dlap-4100-50m-1z344-1000-11/cce0d2d0c5e140645c0f10d75ab9d7771f911b60fede5a218854101b730691a2.jpg)

# SATA Connectors

The SATA connectors support transfers up to 6.0Gb/s (600MB/s).

# Clear CMOS (CLCMOS1)

If the DLAP-4100 encounters an abnormal condition that prevents it from booting, the jumper can be used to clear the BIOS content stored in CMOS and restore the default settings. To clear the CMOS, short pin 2 and pin 3 for at least 3 seconds, then move the jumper back to pins 1 and 2 (default) to return to normal operation.

<table><tr><td>CLCMOS1</td><td>Clear CMOS</td></tr><tr><td>1-2</td><td>Normal (default)</td></tr><tr><td>2-3</td><td>Clear CMOS</td></tr></table>

# 8 Driver Installation

Download the Windows 10/11 drivers from the ADLINK web page:

https://www.adlinktech.com/products/industrial\_pcs\_fanless\_embedded\_pcs/ipcsystems/dlap-4100\_series

The following drivers must be installed:

Chipset
Graphics
• Audio
Ethernet
Intel ME
COM Ports
IRST

This page intentionally left blank.

# 9 BIOS Settings

# Menu Structure

This section presents the six primary menus of the UEFI (BIOS) Setup Utility. Use the following table as a quick reference for the contents of the BIOS Setup Utility. The subsections in this section describe the submenus and setting options for each menu item. The function of each setting is described in the right-hand column of the respective table.

There are two options to enter UEFI Setup Utility:

• Press [F2] or [Del] during POST (Power-On-Self-Test)
• Press [Ctl] + [Alt] + [Del] after POST

<table><tr><td>Main</td><td>Advanced</td><td>H/W Monitor</td></tr><tr><td>Sets up the system time/date and displays the system information:- System Date- System Time- BIOS Information- Memory Information</td><td>Contains advanced system configurations, including:► CPU Configuration► Chipset Configuration► Storage Configuration► Super IO Configuration► AMT Configuration► ACPI Configuration► USB Configuration► Trusted Computing► Instant Flash</td><td>Displays Hardware Status info, including:- Hardware Health Event Monitoring- CPU_FAN1 Setting- CHA_FAN1 Setting- Case Open Feature</td></tr><tr><td>Security</td><td>Boot</td><td>Exit</td></tr><tr><td>Changes or clears the supervisor/user password for the system- Supervisor Password- User Password- Secure Boot</td><td>Configures the boot settings and boot priority for available devices- Boot Option #1- Boot From Onboard LAN- Setup Prompt Timeout- Bootup Num-Lock- Full Screen Logo</td><td>Exits the UEFI Setup Utility while saving or discard the changes made- Save Changes and Exit- Discard Changes and Exit- Discard Changes- Load UEFI Defaults- Launch EFI Shell from filesystem device</td></tr></table>

# Main

Upon entering the UEFI Setup Utility, the Main Menu is displayed, providing read-only information about your system and also allows you to set the System Date and Time. Refer to the screenshots and tables below for details of the submenus and settings.

<table><tr><td>Feature</td><td>Options</td></tr><tr><td>System Date</td><td>xxx mm/dd/yyyy</td></tr><tr><td>System Time</td><td>hh:mm:ss</td></tr><tr><td colspan="2">BIOS Information</td></tr><tr><td>UEFI Version</td><td>DLAP-4100 x.xx.xx</td></tr><tr><td>Processor Type</td><td>Info only</td></tr><tr><td>Processor Speed</td><td>Info only</td></tr><tr><td>Cache Size</td><td>Info only</td></tr><tr><td colspan="2">Memory Information</td></tr><tr><td>Total Memory</td><td>Info only</td></tr><tr><td>DDR5_A1</td><td>Info only</td></tr><tr><td>DDR5_B1</td><td>Info only</td></tr><tr><td>LVDS Rom Version</td><td>Info only</td></tr></table>

# Advanced

Contains the configurations for the following: CPU Configuration, Chipset Configuration, Storage Configuration, Super IO Configuration, AMT Configuration, ACPI Configuration, USB Configuration, and Trusted Computing.

<table><tr><td>Feature</td></tr><tr><td>▶ CPU Configuration</td></tr><tr><td>▶ Chipset Configuration</td></tr><tr><td>▶ Storage Configuration</td></tr><tr><td>▶ Super IO Configuration</td></tr><tr><td>▶ AMT Configuration</td></tr><tr><td>▶ ACPI Configuration</td></tr><tr><td>▶ USB Configuration</td></tr><tr><td>▶ Trusted Computing</td></tr></table>

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>▶ Instant Flash</td><td>Instant Flash is a UEFI flash utility embedded in Flash ROM. This convenient UEFI update tool allows you to update system UEFI without entering operating systems first like MS-DOS or Windows®. Just launch this tool and save the new UEFI file to your USB flash drive, floppy disk or hard drive, and then you can update your UEFI in only a few clicks without preparing an additional floppy diskette or other com- plicated flash utility. Please be noted that the USB flash drive or hard drive must use FAT32/16/12 file system. If you execute Instant Flash utility, the utility will show the UEFI files and their respective information. Select the proper UEFI file to update your UEFI, and reboot your system after UEFI update process completes.</td></tr></table>

CPU Configuration

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Intel Hyper Threading Technology</td><td>Intel Hyper Threading Technology allows multiple threads to run on each core, so that the overall performance on threaded software is improved. Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Active Processor P-Cores</td><td>This allows you to select the number of cores to enable in each processor package.</td></tr><tr><td>Active Processor E-Cores</td><td>This allows you to select the number of E-Cores to enable in each processor package. NOTE: Number of P-Cores and E-Cores are looked at together. When both are {0,0}, Pcode will enable all cores.</td></tr><tr><td>CPU C States Support</td><td>This allows you to enable CPU C States Support for power saving. It is recommended to keep C3, C6 and C7 all enabled for better power saving. Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Enhanced Halt State (C1E)</td><td>The option allows you to enable Enhanced Halt State (C1E) for lower power consumption. Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Package C States Support</td><td>The option allows you to enable CPU, PCIe, Memory, Graphics C State Support for power saving.</td></tr><tr><td>CFG Lock</td><td>The option allows you to enable or disable the CFG Lock. Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Intel Virtualization Technology</td><td>Intel Virtualization Technology allows a platform to run multiple operating systems and applications in independent partitions, so that one computer system can function as multiple virtual systems. Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Intel SpeedStep Technology</td><td>Intel SpeedStep technology allows processors to switch between multiple frequencies and voltage points for better power saving and heat dissipation. CPU turbo ratio can be fixed when Intel SpeedStep Technology is set to [Disabled] and Intel Turbo Boost Technology is set to [Enabled]. Configuration options: [Enabled] [Disabled]. If you install Windows® 10 and want to enable this function, please set this item to [Enabled]. This item will be hidden if the current CPU does not support Intel SpeedStep technology. Please note that enabling this function may reduce CPU voltage and lead to system stability or compatibility issues with some power supplies. Please set this item to [Disabled] if above issues occur.</td></tr><tr><td>Intel Turbo Boost Technology</td><td>Intel Turbo Boost Technology enables the processor to run above its base operating fre- quency when the operating system requests the highest performance state. The default value is [Enabled]. Configuration options: [Enabled] [Disabled]</td></tr><tr><td>CPU Thermal Throttling</td><td>CPU Thermal Throttling allows you to enable CPU internal thermal control mechanisms to keep the CPU from overheating. Configuration options: [Enabled] [Disabled]</td></tr></table>

Chipset Configuration

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Primary Graphics Adapter</td><td>The option allows you to select a primary VGA. Configuration options: [Onboard] [PCI Express] (Options vary when you have installed a graphics card on your motherboard.)</td></tr><tr><td>Above 4G Decoding</td><td>The option allows you to enable or disable above 4G Memory Mapped IO decoding. This is disabled automatically when Aperture Size is set to 2048MB. Configuration options: [Enabled] [Disabled]</td></tr><tr><td>VT-d</td><td>Intel® Virtualization Technology for Directed I/O helps your virtual machine monitor better utilize hardware by improving application compatibility and reliability, and providing additional levels of manageability, security, isolation, and I/O performance. Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Re-Size BAR Support</td><td>If system has Resizable BAR capable PCIe Devices, this option enables or disables Resizable BAR Support.</td></tr><tr><td>PCIE1 Bandwidth Mode</td><td>Select PCIE1 Bandwidth. Select [x8 / x8 Mode] when using Riser card on PCIE1 slot.</td></tr><tr><td>PCIE1 Link Speed</td><td>The option allows you to configure PCIE1 Slot Link Speed. Auto mode is optimizing for overclocking. Configuration options: [Auto] [Gen1] [Gen2] [Gen3] [Gen4] [Gen5] (Options vary depending on your motherboard.)</td></tr><tr><td>Share Memory</td><td>Share memory allows you to configure the size of memory that is allocated to the integrated graphics processor when the system boots up. Configuration options: [Auto][32M][64M][128M][256M][512M] (Options vary depending on the memory you Use on your motherboard.)</td></tr><tr><td>IGPU Multi-Monitor</td><td>Select [Disabled] to disable the integrated graphics when an external graphics card is in- stalled. Select [Enabled] to keep the integrated graphics enabled at all times. Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Render Standby</td><td>Power down the render unit when the GPU is idle for lower power consumption.</td></tr><tr><td>Active LVDS</td><td>Use this option to enable or disable the LVDS. The default value is [Disabled]. Set the item to [Enabled]. Then press &lt;F10&gt; to save the setting and restart the system. Now the default value of Active LVDS is changed to ENABLED (F9 load default is also set to ENABLED). Change the setting from [Enabled] to [Disabled], and then press &lt;F10&gt; to save the setting and restart the system. Likewise, the default value of Active LVDS is changed to DIS- ABLED (F9 load default is also set to DISABLED).</td></tr><tr><td>Onboard LAN1</td><td>This allows you to enable or disable the Onboard LAN1 feature.</td></tr><tr><td>Onboard LAN2</td><td>This allows you to enable or disable the Onboard LAN2 feature.</td></tr><tr><td>Onboard HD Audio</td><td>Onboard HD Audio allows you to enable or disable the onboard HD audio controller. Set this item to [Auto] to enable the onboard HD and automatically disable it when a sound card is installed.Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Restore on AC/Power Loss</td><td>The option allows you to select the power state after a power failure. [Power Off] sets the power to remain off when the power recovers. [Power On] sets the system to start to boot up when the power recovers.</td></tr></table>

Storage Configuration

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>VMD Configuration</td><td>This item allows you to enable or disable the Intel VMD support function.</td></tr><tr><td>SATA Controller(s)</td><td>The option allows you to enable or disable the SATA controllers.Configuration options: [Enabled] [Disabled]</td></tr><tr><td>SATA Mode Selection</td><td>AHCI supports new features that improve performance.Configuration option: [AHCI]</td></tr><tr><td>Hybrid Storage Detection and Configuration Mode</td><td>The option allows you to select Hybrid Storage Detection and Configuration Mode.Configuration options: [Dynamic Configuration for Hybrid Storage Enable] [Disabled]</td></tr><tr><td>SATA Aggressive Link Power Management</td><td>SATA Aggressive Link Power Management allows SATA devices to enter a low power state during periods of inactivity to save power. It is supported only by AHCI mode.Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Hard Disk S.M.A.R.T.</td><td>S.M.A.R.T stands for Self-Monitoring, Analysis, and Reporting Technology. It is a monitoring system for computer hard disk drives to detect and report on various indicators of reliability.Configuration options: [Enabled] [Disabled]</td></tr></table>

Super IO Configuration

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>COM1 Configuration</td><td>Use this to set parameters of COM1.Type SelectUse this to select COM1 port type: [RS232], [RS422] or [RS485].</td></tr><tr><td>COM2 Configuration</td><td>Use this to set parameters of COM2.Type SelectUse this to select COM2 port type: [RS232], [RS422] or [RS485].</td></tr><tr><td>COM3 Configuration</td><td>Use this to set parameters of COM3.</td></tr><tr><td>COM4 Configuration</td><td>Use this to set parameters of COM4.</td></tr><tr><td>WDT Timeout Reset</td><td>Use this to set the Watch Dog Timer.</td></tr></table>

AMT Configuration

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>USB Provisioning of AMT</td><td>Use this to enable or disable AMT USB Provisioning. The default is [Disabled].</td></tr><tr><td>MAC Pass Through</td><td>The option enables or disables MAC Pass Through function.</td></tr><tr><td>Activate Remote Assistance Process</td><td>Trigger CIRA boot. The default is [Disabled].</td></tr><tr><td>Un-Configure ME</td><td>Un-Configure ME without password. The default is [Disabled].</td></tr><tr><td>ASF Configuration</td><td>The option allows you to configure Alert Standard Format parameters.</td></tr><tr><td>Secure Erase Configuration</td><td>Secure Erase configuration menu.</td></tr><tr><td>One Click Recovery (OCR) Configuration</td><td>Configuration setting for One Click Recovery. This allows access for AMT to boot a recovery OS application</td></tr><tr><td>MEBx</td><td>This Formset contains forms for configuring MEBx.</td></tr></table>

ACPI Configuration

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Suspend to RAM</td><td>Suspend to RAM allows you to select [Disabled] for ACPI suspend type S1. It is recommended to select [Auto] for ACPI S3 power saving.Configuration options: [Auto] [Disabled]</td></tr><tr><td>PCIE Devices Power On</td><td>Use this item to enable or disable PCIE devices to turn on the system from the power-soft-off mode.</td></tr><tr><td>RTC Alarm Power On</td><td>RTC Alarm Power On allows the system to be waked up by the real time clock alarm. Set it to By OS to let it be handled by your operating system.Configuration options: [Enabled] [Disabled] [By OS]</td></tr></table>

# USB Configuration

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>USB Power Control</td><td>Use this option to control USB power.</td></tr><tr><td>M.2 Key_B USB Function</td><td>The item enables or disables M.2 Key_B USB function.</td></tr></table>

# Trusted Computing

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Security Device Support</td><td>Security Device Support allows you to enable or disable BIOS support for security device.
O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available.
Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Active PCR banks</td><td>This item displays active PCR Banks.</td></tr><tr><td>Available PCR Banks</td><td>This item displays available PCR Banks.</td></tr><tr><td>SHA256 PCR Bank</td><td>SHA256 PCR Bank allows you to enable or disable SHA256 PCR Bank.
Configuration options: [Enabled] [Disabled]</td></tr><tr><td>SHA384 PCR Bank</td><td>SHA384 PCR Bank allows you to enable or disable SHA384 PCR Bank.
Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Pending Operation</td><td>Pending Operation allows you to schedule an Operation for the Security Device.
NOTE: Your computer will reboot during restart in order to change State of the Device.
Configuration options: [None] [TPM Clear]</td></tr><tr><td>Platform Hierarchy</td><td>This item allows you to enable or disable Platform Hierarchy.
Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Storage Hierarchy</td><td>This item allows you to enable or disable Storage Hierarchy.
Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Endorsement Hierarchy</td><td>This item allows you to enable or disable Endorsement Hierarchy.
Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Physical Presence Spec Version</td><td>Select this item to tell OS to support PPI spec version 1.2 or 1.3. Please note that some HCK tests might not support version 1.3.
Configuration options: [1.2] [1.3]</td></tr><tr><td>TPM 2.0 InterfaceType</td><td>This item allows you to view the Communication Interface to TPM 2.0 Device: CRB or ITS.</td></tr><tr><td>Device Select</td><td>This item allows you to select the TPM device to be supported.[TPM 1.2] restricts support to TPM 1.2 devices.[TPM 2.0] restricts support to TPM 2.0 devices.[Auto] supports both TPM 1.2 and TPM 2.0 devices with the default set to TPM 2.0 de- vices. If TPM 2.0 devices are not found, TPM 1.2 devices will be enumerated.</td></tr><tr><td>Onboard TPM</td><td>The option enables or disables Intel PTT in ME. Disable this option to Use discrete TPM Module.</td></tr></table>

# HW Monitor

This screen allows you to monitor the status of your system and installed devices, such as CPU temperature, motherboard temperature, CPU fan speed, chassis fan speed, and the critical voltage.

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>CPU_Fan 1 Setting</td><td>This item allows you to select a fan mode for CPU Fan 1. The default value is [Full On].Configuration options: [Full On] [Automatic Mode]</td></tr><tr><td>CHA_Fan 1 Setting</td><td>This allows you to set chassis fan 1’s speed. The default value is [Full On].Configuration options: [Full On] [Automatic Mode]</td></tr><tr><td>Case Open Feature</td><td>This item allows you to enable or disable case open detection feature.The default is value [Disabled].</td></tr><tr><td>Clear Status</td><td>This option appears only when the case open has been detected. Use this option to keep or clear the record of previous chassis intrusion status.</td></tr></table>

# Security

The Security Screen lets you change or clear the supervisor / user passwords for the system.

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Supervisor Password</td><td>Set or change the password for the administrator account. Only the administrator has the authority to change the settings in the UEFI Setup Utility. Leave it blank and press enter to remove the password.</td></tr><tr><td>User Password</td><td>Set or change the password for the user account. Users are unable to change the settings in the UEFI Setup Utility. Leave it blank and press enter to remove the password.</td></tr><tr><td>Secure Boot</td><td>Press [Enter] to configure the Secure Boot Settings. The feature protects the system from unauthorized access and malwares during POST.</td></tr><tr><td>Secure Boot Mode</td><td>[Standard] Select this item and the system will automatically load the Secure Boot keys from the BIOS database.[Custom] Select this item and Secure Boot Policy variables can be configured by a physically present user without full authentication.</td></tr><tr><td>Install Default Secure Boot Keys</td><td>Please install default secure boot keys if it's the first time you use secure boot.</td></tr><tr><td>Clear Secure Boot Keys</td><td>This item appears only when you load the default Secure Boot keys. Use this item to clear all default Secure Boot keys.</td></tr><tr><td>Key Management</td><td>This item enables expert users to modify Secure Boot Policy variables without full authentication.This appears only when you set Secure Boot Mode to [Custom].</td></tr></table>

# Boot

This section displays the available devices on your system for you to configure the boot priority and settings.

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Boot From Onboard LAN</td><td>The item allows the system to be waked up by the onboard LAN.Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Setup Prompt Timeout</td><td>The item allows you to configures the number of seconds to wait for the UEFI setup utility.Configuration options: [1] - [65535]</td></tr><tr><td>Bootup Num-Lock</td><td>The item allows you to select whether Num Lock should be turned on or off when the system boots up.Configuration options: [On] [Off]</td></tr><tr><td>Full Screen Logo</td><td>[Enabled] Select this item to display the boot logo.[Disabled] Select this item to show normal POST messages.</td></tr></table>

Exit

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Save Changes and Exit</td><td>When you select this option, the following message “Save configuration changes and exit setup?” will pop out. Select [Yes] to save the changes and exit the UEFI SETUP UTILITY.</td></tr><tr><td>Discard Changes and Exit</td><td>When you select this option, the following message “Discard changes and exit setup?” will pop out. Select [Yes] to exit the UEFI SETUP UTILITY without saving any changes.</td></tr><tr><td>Discard Changes</td><td>When you select this option, the following message “Discard changes?” will pop out. Select [Yes] to discard all the changes.</td></tr><tr><td>Load UEFI Defaults</td><td>The item allows you to load UEFI default values for all options. The F9 key can be used for this operation.</td></tr><tr><td>Launch EFI Shell from filesystem device</td><td>The item allows you to copy shellx64.efi to the root directory to launch EFI Shell.</td></tr></table>

# Safety Instructions

For user safety, please read and follow all instructions, Warnings, Cautions, and Notes marked in this manual and on the associated device before handling/operating the device, to avoid injury or damage.

S'il vous plaît prêter attention stricte à tous les avertissements et mises en garde figurant sur l'appareil , pour éviter des blessures ou des dommages.

► Read these safety instructions carefully.
► Keep the User’s Manual for future reference.
► Read the Specifications section of this manual for detailed information on the recommended operating environment.
► When installing/mounting or uninstalling/removing device; or when removal of a chassis cover is required for user servicing (See “Getting Started”):

[> Turn off power and unplug any power cords/cables.

[> Reinstall all chassis covers before restoring power.

► To avoid electrical shock and/or damage to device:

[> Keep device away from water or liquid sources.
[> Keep device away from high heat or humidity.
[> Keep device properly ventilated (do not block or cover ventilation openings).
[> Always use recommended voltage and power source settings.
[> Always install and operate device near an easily accessible electrical outlet.
[> Secure the power cord (do not place any object on/over the power cord) and connect it to a socket-outlet with earthing connection.
[> Only install/attach and operate device on stable surfaces and/or recommended mountings.

► If the device will not be used for long periods of time, turn off and unplug from its power source.
► Never attempt to repair the device, which should only be serviced by qualified technical personnel using suitable tools.
► A Lithium-type battery may be provided for uninterrupted backup or emergency power.

![The image displays a standard warning symbol consisting of a yellow triangle with a thick black border. Inside the triangle is a large black exclamation point centered on the yellow background.](.dlap-4100-50m-1z344-1000-11/55477a292349b06affa03f46dc1924efbc8512288ea81cdf6b9328917658b1ab.jpg)
CAUTION:

Risk of explosion if battery is replaced with one of an incorrect type; please dispose of used batteries appropriately.

Risque d’explosion si la pile est remplacée par une autre de type incorrect. Veuillez jeter les piles usagées de façon appropriée.

► The device must be serviced by authorized technicians when:

[> The power cord or plug is damaged.
[> Liquid has entered the device interior.
[> The device has been exposed to high humidity and/or moisture.
[> The device is not functioning or does not function according to the User’s Manual.
[> The device has been dropped and/or damaged and/or shows obvious signs of breakage.

► Disconnect the power supply cord before loosening the thumbscrews and always fasten the thumbscrews with a screwdriver before starting the system up.

[> The equipment is not intended to be installed or used in a home, school, or public area accessible to the general population.
[> The knurled thumb screws with slotted heads for each Node module should be tightened with a tool after both initial installation and subsequent use.

► It is recommended that the device be installed only in a server room or computer room where access is:

[> Restricted to qualified service personnel or users familiar with restrictions applied to the location, reasons therefore, and any precautions required.
[> Only afforded by the use of a tool or lock and key, or other means of security, and controlled by the authority responsible for the location.

► Please use an approved power source certified by IEC or UL. If you need an adapter, optional accessories, or further assistance, please contact ADLINK for more information.

![A yellow triangular warning sign with a thick black border. Inside the triangle is a black symbol consisting of three wavy vertical lines rising above a horizontal line.](.dlap-4100-50m-1z344-1000-11/908f86e24860feaa7952d7f7e2b1c86a5cde83a28064126229e02f3d63a87011.jpg)

# BURN HAZARD

Touching this surface could result in bodily injury. To reduce risk, allow the surface to cool before touching.

# RISQUE DE BRÛLURES

Ne touchez pas cette surface, cela pourrait entraîner des blessures. Pour éviter tout danger, laissez la surface refroidir avant de la toucher.

► Lisez attentivement ces consignes de sécurité
► Conservez le manuel de l'utilisateur pour pouvoir le consulter ultérieurement
Lisez la section Spécifications de ce manuel pour des informations détaillées sur l'environnement d'exploitation recommandé
Lors de l'installation/montage ou de la désinstallation/retrait de l'appareil ; ou lorsque le retrait d'un boîtier est nécessaire pour l'entretien par l'utilisateur (voir Mise en route) :
► Éteignez l'alimentation et débranchez tous les cordons/câbles d'alimentation.
► Réinstallez tous les panneaux du boîtier avant de remettre l'alimentation sous tension.
► Pour éviter les chocs électriques et/ou d’endommager l’appareil :

► Tenez l'appareil à l'écart de toute source d'eau ou de liquide
► Tenez l'appareil à l'écart d'une forte chaleur ou d'une humidité élevée
► Maintenez l'appareil correctement ventilé (n'obstruer ou ne couvrez pas les ouvertures de ventilation)
► Utilisez toujours les réglages de tension et de source d'alimentation recommandés
► Installez et utilisez toujours l'appareil près d'une prise de courant facilement accessible
Fixez le cordon d'alimentation (ne placez aucun objet sur/au-dessus du cordon d'alimentation) et connectez-le à une prise de courant avec mise à la terre

► N'essayez jamais de réparer l'appareil, qui doit être réparé uniquement par du personnel technique qualifié et utilisant des outils appropriés.

► Lors de l'installation/montage ou de la désinstallation/retrait d'un périphérique, ou lorsque le retrait d'un couvercle de châssis est requis pour l'entretien par l'utilisateur :
► Coupez l’alimentation et débranchez tous les cordons/câbles d’alimentation.

► Réinstallez tous les capots du châssis avant de rétablir l'alimentation. Installez/fixez et utilisez l'appareil uniquement sur des surfaces stables et/ou des supports recommandés.

► Si l'appareil n'est pas utilisé pendant une longue période, éteignez-le et débranchez-le de sa source d'alimentation.

► Une batterie de type lithium peut être fournie pour une alimentation de secours ou de secours ininterrompue.

► L'appareil doit être réparé par des techniciens agréés lorsque :
► Le cordon d'alimentation ou la fiche est endommagé.
► Du liquide est entré dans l’appareil. € L'appareil a été exposé à une humidité élevée et/ou à l'humidité.
► L'appareil ne fonctionne pas ou ne fonctionne pas conformément au manuel de l'utilisateur.

► L'appareil est tombé et/ou a été endommagé et/ou présente des signes évidents de casse.
► Débranchez le cordon d'alimentation avant de desserrer les vis moletées et fixez toujours les vis moletées avec un tournevis avant de démarrer le système.
L'équipement n'est pas destiné à être installé ou utilisé dans une maison, une école ou une zone publique accessible au grand public.
Les vis à molette avec têtes fendue pour chaque module Node doivent être serrées avec un outil après l'installation initiale et lors de l'utilisation suivante.
► Il est recommandé d'installer l'appareil uniquement dans une salle de serveurs ou une salle informatique dont l'accès est :

Réservé au personnel de service qualifié ou aux utilisateurs familiers avec les restrictions appliquées à l'emplacement, les raisons de celles-ci et les précautions requises.
Autorisé uniquement par l'utilisation d'un outil ou d'une serrure et d'une clé, ou d'autres moyens de sécurité, et contrôlé par l'autorité responsable du lieu.

Veuillez utiliser une source d'alimentation approuvée et certifiée par la norme IEC ou UL. Si vous avez besoin d'un adaptateur, d'accessoires en option ou d'une assistance supplémentaire, veuillez contacter ADLINK pour plus d'informations.

# Getting Services

Ask an Expert: https://www.adlinktech.com/en/Askanexpert

# ADLINK Technology, Inc.

<table><tr><td>Address:</td><td>No. 66, Huaya 1st Road, Guishan DistrictTaoyuan City 333, Taiwan</td></tr><tr><td>Tel:</td><td>+886-3-216-5088</td></tr><tr><td>Fax:</td><td>+886-3-328-5723</td></tr><tr><td>Email:</td><td>service@adlinktech.com</td></tr></table>

# Ampro ADLINK Technology, Inc.

Address: 6450 Via Del Oro, San Jose, CA 95119-1208, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

Fax: +1-408-600-1189

Email: info@adlinktech.com

# ADLINK Technology (China) Co., Ltd.

<table><tr><td>Address:</td><td>300 Fang Chun Rd., Zhangjiang Hi-Tech Park, Pudong New Area Shanghai, 201203 China</td></tr><tr><td>Tel:</td><td>+86-21-5132-8988</td></tr><tr><td>Fax:</td><td>+86-21-5132-3588</td></tr><tr><td>Email:</td><td>market@adlinktech.com</td></tr></table>

# ADLINK Technology GmbH

<table><tr><td>Address:</td><td>Hans-Thoma-Strasse 8-10, 68163, Mannheim, Germany</td></tr><tr><td>Tel:</td><td>+49-621-43214-0</td></tr><tr><td>Fax:</td><td>+49-621 43214-30</td></tr><tr><td>Email:</td><td>emea@adlinktech.com</td></tr></table>

Please visit the Contact page at www.adlinktech.com for information on how to contact the ADLINK regional office nearest you.
[🔗 Link to the original document](.dlap-4100-50m-1z344-1000-11/dlap-4100-50m-1z344-1000-11.pdf)