# DLAP-5200 Series

# User’s Manual

Fanless High Performance AI Computer

![ADLINK\nCND ANT 1\n9-32 VDC\nV+ V-\nHDMI 1\nHDMI 2\nDIP 3\nINT 2\nINT 1\nINT 2\nINT 3\nU3 WD\nU2\nU1\n5\n6\nUSB 3 Gen2\nUSB 3 Gen2\nUSB 3 Gen1\nANT 3 ANT 5\n4\n2.5G 5\nCOM 1 COM 2](.dlap-5200-50m-00125-2000-10/044a669df17baefd026cbd7c9265f60113c3aba27bcf69dbfc0d0c17e87e214d.jpg)

Manual Rev.: Rev. 1.0

Revision Date: July 16, 2025

Part Number: 50M-00125-2000

# Revision History

<table><tr><td>Revision</td><td>Release Date</td><td>Description of Change(s)</td></tr><tr><td>1.0</td><td>2025-07-16</td><td>Initial release</td></tr></table>

# Preface

# Copyright

Copyright 2025 ADLINK Technology, Inc. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

# Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

# Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.

![Symbol of a trash bin crossed with a diagonal line and a horizontal bar below (no text or labels)](.dlap-5200-50m-00125-2000-10/03783dee855f3079755ce8add20751bb9bedb4e366a19e75f89c077ab0530b98.jpg)

Battery Labels (for products with battery)

![Symbol of a trash bin crossed out by two diagonal lines (no text or labels)](.dlap-5200-50m-00125-2000-10/3a039360be3a438b6c4f2abc2c46d37b96f929807e029771414462c2dbd31e47.jpg)

![Li-ion](.dlap-5200-50m-00125-2000-10/8eeb87db2025a3fa779740344dcb21bab786e1a161af01805c6119465d7b43a7.jpg)

![RECYCLE\nRBRC\nLi-ion\n7.800.822.8837](.dlap-5200-50m-00125-2000-10/b5e001e511dcb02b20fb024951c39f224339ff7559977488bd20264209e75f79.jpg)

![廢電池請回收](.dlap-5200-50m-00125-2000-10/545931f03f6c1d2af48132055a0d43a811e1fa4f06cd9b084eb51bae92d5fb7c.jpg)

# California Proposition 65 Warning

![The image displays a standard warning symbol. It consists of a yellow triangle with a thick black border. Centered inside the yellow triangle is a large black exclamation point. The background surrounding the sign is white.](.dlap-5200-50m-00125-2000-10/1a099f301736d9f6bb602096a57ab3e49776c2ea08b35b02bb6462331e03ec62.jpg)

WARNING: This product can expose you to chemicals including acrylamide, arsenic, benzene, cadmium, Tris(1,3-dichloro-2-propyl)phosphate (TDCPP), 1,4-Dioxane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and vinyl materials, which are known to the State of California to cause cancer, and acrylamide, benzene, cadmium, lead, mercury, phthalates, toluene, DEHP, DIDP, DnHP,

DBP, BBP, PVC, and vinyl materials, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

# Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

# Conventions

Take note of the following conventions used throughout this manual to make sure that users perform certain tasks and instructions properly.

![The image displays a document icon featuring a white page with a folded upper-right corner and faint horizontal lines suggesting text. A large, bold red checkmark is superimposed diagonally across the document.](.dlap-5200-50m-00125-2000-10/00780d9aafa2ba609541b7d7c0d86b416f176223d8b09d316d55c3cc82490ad1.jpg)
NOTE:

Additional information, aids, and tips that help users perform tasks.

![A yellow triangular warning sign with a black border and a black exclamation point in the center.](.dlap-5200-50m-00125-2000-10/a093356d86b8b1041c60f40282ef5d14f75fbf1ddd851bfd3188ab2028ca2a49.jpg)
CAUTION:

Information to prevent minor physical injury, component damage, data loss, and/or program corruption when trying to complete a task.

![The image displays a red triangle containing a white exclamation point in the center, resembling a standard warning symbol.](.dlap-5200-50m-00125-2000-10/e2cb8e99da96c933229ca7f40fc30cdc44320ddd23b1852fcd27a45635731939.jpg)
WARNING:

Information to prevent serious physical injury, component damage, data loss, and/or program corruption when trying to complete a specific task.

# Table of Contents

# Preface...

# List of Figures .... ..vii

# List of Tables...... ..vii

# 1 Introduction....

1.1 Overview .. .9
1.2 Features.. ..9
1.3 Packing List.. .9
1.4 Optional Accessories . .9

# 2 Specifications ... .11

2.1 Product Specifications.. ..11
2.2 Functional Block Diagram . ..12
2.3 Display Options .. ..12

# 3 Mechanical Layout .............. ..13

3.1 Mechanical Dimensions . .13
3.2 Front/Side Panel I/O Locations . ..14
3.3 Internal I/O Connectors . ..15

# 4 Connectors and Jumpers .. .19

4.1 Front/Side I/O Connectors and Jumpers.. ..19
4.2 Internal I/O Connectors and Jumpers . ..22

# 5 Getting Started... .25

5.1 Package Contents. ..25
5.2 Attach DC Power Connector .. ..25
5.3 Mounting the DLAP-5200 Series.. ..26
5.4 Driver Installation . ..29

# 6 Appendix A Power....... .31

6.1 Power Consumption Reference ..31

# 7 Appendix B BIOS Setup.... .33

7.1 Main .. ..33
7.2 Advanced . ..34
7.3 Chipset.. ...44
7.4 Security .. ..51
7.5 Boot... ..53
7.6 Save & Exit.. ..54

7.7 MEBx . ..55

8 Appendix C Watchdog Timer (WDT) Function Library...... ..57

8.1 WDT with API/Windows.. ..57
8.2 WDT with DOS/Linux . ..59

9 Appendix D Digital Input/Output Function Library ...... ..61

Safety Instructions.... .62

Getting Services.... .64

# List of Figures

Figure 1: Functional block diagram. ..12

Figure 2: DLAP-5200 Series top view.. ..13

Figure 3: DLAP-5200 Series front view . ..14

Figure 4: Front panel I/O . ..14

Figure 5: Mainboard top connectors . ..15

Figure 6: Mainboard bottom connectors . ..16

# List of Tables

Table 1: Mainboard top connector legend . ..15

Table 2: Mainboard bottom connector legend . .17

This page intentionally left blank.

# 1 Introduction

# 1.1 Overview

The DLAP-5200 industrial AI computers are powered by 13th/12th Gen Intel® Core™ i9/i7/i5/i3 processors. Featuring the Intel R680E chipset and supporting up to 65W, these computers can also incorporate GPU cards in a rugged package suitable for AI inferencing at the edge. They can be used for, but are not limited to, smart manufacturing, semiconductor equipment, and warehouse applications.

# 1.2 Features

• 13th/12th Generation Intel® Core™ i9/i7/i5/i3 FCLGA1700 processor and R680E chipset
• 4x DDR5 SODIMM socket, supporting up to 128GB DDR5 3600 SODIMM module
• 3x DisplayPort, 2x HDMI, supporting 4 independent displays
6x External USB ports (4x USB 3.2 Gen 2, 2x USB 3.2 Gen 1)
6x Intel 2.5Gbe i225 LAN ports with TSN support
• 2 software-programmable RS-232/422/485
Onboard SATA 6Gb/s port for 2.5” SSD installation
Supports MXM 3.1 Type A/B form factor GPU module

# 1.3 Packing List

Before unpacking, check the shipping carton for any damage. If the shipping carton and/or contents are damaged, inform your dealer immediately. Retain the shipping carton and packing mate- rials for inspection. Obtain authorization from your dealer before returning any product to ADLINK. Ensure that the following items are included in the package.

DLAP-5200 Series Fanless Embedded Computer
Accessory Box
o DC power jack
o Wall-mount brackets
o Screw pack

# 1.4 Optional Accessories

• AC/DC Adapter
o 280W (P/N: 31-62162-1010-A0)

This page intentionally left blank.

# 2 Specifications

2.1 Product Specifications

<table><tr><td colspan="2">Model</td><td>DLAP-5200-3DP</td><td>DLAP-5200-6DP</td></tr><tr><td rowspan="8">System</td><td>CPU</td><td>12th/13th Gen Intel® CoreTM processors</td><td>12th/13th Gen Intel® CoreTM processors</td></tr><tr><td>Chipset</td><td>R680E</td><td>R680E</td></tr><tr><td>Memory</td><td>Max. 128GB, DDR5 4x SO-DIMMs, up to 4800MHz</td><td>Max. 128GB, DDR5 4x SO-DIMMs, up to 4800MHz</td></tr><tr><td>Storage</td><td>2x SATA IIIx (6Gb/s) for 2.5-inch SSD</td><td>2x SATA IIIx (6Gb/s) for 2.5-inch SSD</td></tr><tr><td>MXM module</td><td>Intel Arc A370MNVIDIA A1000, A2000, A4500, RTX 3000</td><td>Intel Arc A370MNVIDIA A1000, A2000, A4500, RTX 3000</td></tr><tr><td>Operating System</td><td>Windows 10/11 IoT Enterprise 64-bit Ubuntu 22.04</td><td>Windows 10/11 IoT Enterprise 64-bit Ubuntu 22.04</td></tr><tr><td>TPM</td><td>TPM 2.0 on board</td><td>TPM 2.0 on board</td></tr><tr><td>LED indicator</td><td>1 storage, 1 WDT, 1 diagnostic and 3 user-defined</td><td>1 storage, 1 WDT, 1 diagnostic and 3 user-defined</td></tr><tr><td rowspan="5">I/O interfaces</td><td>Display Ports</td><td>2x HDMI 1.4b3x DisplayPort 1.4 (1x from MXM module)</td><td>2x HDMI 1.4b6x DisplayPort 1.4 (4x from MXM module)</td></tr><tr><td>Ethernet Ports</td><td>6x 2.5GbE with TSN supported (i225)</td><td>3x 2.5GbE with TSN supported (i225)</td></tr><tr><td>USB Ports</td><td>4x USB 3.2 Gen2 (Type A) 2x USB 3.1 Gen2 (Type A)</td><td>4x USB 3.2 Gen2 (Type A) 2x USB 3.1 Gen2 (Type A)</td></tr><tr><td>Serial Ports</td><td>2x RS-232/422/485</td><td>2x RS-232/422/4851x RS-232</td></tr><tr><td>Expansion Slots</td><td>1x M.2 2280 M Key1x M.2 2230 E Key</td><td>1x M.2 2280 M Key1x M.2 2230 E Key</td></tr><tr><td rowspan="2">Mechanical</td><td>Dimension (W X D X H)</td><td>125mm x 240mm x 210mm</td><td>125mm x 240mm x 210mm</td></tr><tr><td>Weight</td><td>6.8 kg</td><td>6.8 kg</td></tr><tr><td></td><td>Mounting</td><td>Wall mount</td><td>Wall mount</td></tr><tr><td></td><td>Interface</td><td>2-pin phoenix</td><td>2-pin phoenix</td></tr><tr><td>Power</td><td>Power Supply</td><td>12/24 VDC,AC-DC 280W adapter (optional)</td><td>12/24 VDC,AC-DC 280W adapter (optional)</td></tr><tr><td rowspan="8">Environment</td><td>Operating Temperature</td><td>-20 to 50 °C (35W CPU)-20 to 40 °C (65W CPU)</td><td>-20 to 50 °C (35W CPU)-20 to 40 °C (65W CPU)</td></tr><tr><td>Storage Temperature</td><td>-40°C to 85°C (-40°F to 185°F)</td><td>-40°C to 85°C (-40°F to 185°F)</td></tr><tr><td>Humidity</td><td>~95% @ 40°C (Non-condensing)</td><td>~95% @ 40°C (Non-condensing)</td></tr><tr><td>Vibration Operating</td><td>3Grms, random, 5-500Hz, 3 axes (w/SSD)</td><td>3Grms, random, 5-500Hz, 3 axes (w/SSD)</td></tr><tr><td>Shock Operating</td><td>30G, half sine 11ms duration (w/SSD)</td><td>30G, half sine 11ms duration (w/SSD)</td></tr><tr><td>ESD</td><td>Contact +/-4KV, Air +/-8KV</td><td>Contact +/-4KV, Air +/-8KV</td></tr><tr><td>EMC</td><td>CE &amp; FCC Class A</td><td>CE &amp; FCC Class A</td></tr><tr><td>Safety</td><td>UL/CB</td><td>UL/CB</td></tr></table>

# 2.2 Functional Block Diagram

![**Legend**\n*   **Internal port** (Orange blocks)\n*   **External port** (Yellow blocks)\n\n**Main Components**\n*   Processor Alder Lake S 35W/65W\n*   Intel PCH R680E\n\n**Processor Connections**\n*   **DDR5:** Connects to **DDR5 SO-DIMM 1~4 2 DIMM - 3600** via **CH0, 1**.\n*   **Display Outputs:**\n    *   Connects to **DP1 CN** via **DDI-C(RVP)**.\n    *   Connects to **DP2 CN** via **DDI-E(RVP)**.\n    *   Connects to **HDMI LS PTN3360** via **DDI-B(RVP)**. This controller connects to **HDMI1.4**, which connects to **HDMI 1 CN**.\n    *   Connects to **HDMI LS PTN3360** via **DDI-D(RVP)**. This controller connects to **HDMI1.4**, which connects to **HDMI 2 CN**.\n*   **Expansion:** Connects to **ADLINK AFM** via **PCIe x16 (GEN4)**.\n*   **Chipset Link:** Connects to **Intel PCH R680E** via **DMI x8 Gen 4**.\n\n**Intel PCH R680E Connections**\n*   **Left Side (Storage & Modules):**\n    *   Connects to **MUX TMUXHS4212** via **PCIe gen3 x3** and **SATA**.\n    *   **MUX TMUXHS4212** connects to **M.2 M-Key Conn. 2280 (NVMe/SATA)** via **PCIe gen3 x1**. The M.2 slot also connects back to the MUX via **PCIe/SATA**.\n    *   Connects to **M.2 B-Key Conn. 3042/3052 (5G module)** via **PCIe gen3** and **USB3.0/2.0**.\n    *   **Micro SIM Slot 1 & 2** connects to the M.2 B-Key module.\n    *   Connects to **M.2 E-Key Conn. 2230 (WiFi/BT)** via **PCIe gen1** and **USB2.0**.\n    *   Connects to **SATA Conn x2 (2.5' storage x1)** via **SATA x2**.\n    *   **SATA Conn x2** connects to **2.5' storage x1** via **Cable**.\n    *   Connects to **USB DONGLE** via **USB2.0**.\n    *   Connects to **I2C Wafer x2** via **I2C**.\n\n*   **Right Side (I/O & Peripherals):**\n    *   Connects to **USB3.2 Gen2 Type A x4** via **USB2.0 + USB3.2 Gen2**.\n    *   Connects to **USB3.2 Gen1 Type A x2** via **USB2.0 + USB3.2 Gen1**.\n    *   Connects to **Intel i225-LM x3** via **PCIe x3**.\n    *   **Intel i225-LM x3** connects to **2.5G RJ45 x3** via **MDI**.\n    *   Connects to **8DI/8DO Wafer** via **GPIO**.\n    *   **8DI/8DO Wafer** connects to **DI/DO DB26** via **Cable**.\n    *   Connects to **SUOER I/O NCT6126D** via **eSPI**.\n    *   **SUOER I/O NCT6126D** connects to **FAN conn** via **FAN out**.\n    *   Connects to **DB40 conn**.\n    *   **DB40 conn** connects to **UART 1/2**, which connects to **SP339EER**, then via **Cable** to **RS232/422/485 x2 (DB9 CN)**.\n    *   **DB40 conn** connects to **UART 3/4**, which connects to **ADM213E**, then via **Cable** to **RS232 x2 (DB9 CN)**.\n    *   Connects to **TPM 2.0 SLB 9670** via **SPI**.\n    *   Connects to **BUS SW 74CBTLV3257** via **SPI**.\n    *   **BUS SW 74CBTLV3257** connects to **BIOS ROM MX25L25673GM2I** via **SPI**.\n\n*   **Power:**\n    *   **DC 9-32V IN** connects to the **Intel PCH R680E**.](.dlap-5200-50m-00125-2000-10/64e10ccdfd0d048d42a446734a549aa4d08cbfc90eb248a23525e19c3f6523ec.jpg)

Figure 1: Functional block diagram

# 2.3 Display Options

With computing and graphics performance enhancements from its 13th/12th Generation Intel processors, the DLAP-5200 Series controller can support four independent displays from the mainboard, with configurations as follows.

<table><tr><td></td><td>Port</td><td>Resolution</td></tr><tr><td>Display Option 1</td><td>DisplayPort1</td><td>4096x2304@60Hz</td></tr><tr><td>Display Option 2</td><td>DisplayPort2</td><td>4096x2304@60Hz</td></tr><tr><td>Display Option 3</td><td>HDMI1</td><td>3840x2160 @ 60Hz</td></tr><tr><td>Display Option 4</td><td>HDMI2</td><td>3840x2160 @ 60Hz</td></tr></table>

# 3 Mechanical Layout

# 3.1 Mechanical Dimensions

![The image displays a white document icon featuring faint horizontal grey lines and a large red checkmark superimposed on the left side. Below the icon, the text 'NOTE:' is written in black capital letters.](.dlap-5200-50m-00125-2000-10/ec18ad833cf0ffb3d28b21dea6ca9d47e6f1b173a78d7010821c5145db08d606.jpg)

All dimensions shown are in millimeters.

![5.20\n15\nR4\n16.90\n4.60\n179\n212.80\n239\n225\n238\nDLAP](.dlap-5200-50m-00125-2000-10/5a2fe3c46d91e60242fff521393f98c9a4560654b20c669ac730d00abbb86d74.jpg)

Figure 2: DLAP-5200 Series top view

![GND\nANT 1\nADLINK\n9-32 VDC\nV+ V-\nDP++ 1\nHDMI 1\nDP++ 2\nHDMI 2\nUSB 3 Gen2\n1\n2\n3\n4\nUSB 3 Gen2\nU3 WD\nU2\nU1\n5 ○○\n6 ○○\nANT3\nANT5\nANT 6\n4\n2.5G\nDP 3\nCOM 1\nCOM 2\n2](.dlap-5200-50m-00125-2000-10/1665dbfc3b739c937fc35cbb0145d856f426f2a45bd71b9ad642f779c397ea01.jpg)

Figure 3: DLAP-5200 Series front view

# 3.2 Front/Side Panel I/O Locations

The DLAP-5200 Series provides the following front and side panel access features.

![3x 2.5GbE\n9-32VDC\nADLINK\n2x HDMI\n3x DisplayPort\n3x 2.5GbE\n4x USB 3.2\n2x USB 3.1\n2x COM Port\nPower Button\nGND ANT 1\n9-32 VDC\nV+ V-\nHDMI 1\nHDMI 2\nINT 2\n1\n2\n3\nU3 WD\nU2\nU1\nUSB 3 Gen2\nUSB 3 Gen2\nUSB 3 Gen1\nINT 3 ANT 5\nANT 6\n4\n5\n6\n2.5G\nDP++ 1\nDP++ 2\n1\n2\n3\n4\n5\n6\nCOM 1\nCOM 2](.dlap-5200-50m-00125-2000-10/2c28d31994b62b8582b3250ec49ca19a88868a3e6b1385af72b8051b45929674.jpg)

Figure 4: Front panel I/O

# 3.3 Internal I/O Connectors

# 3.3.1 Mainboard Top/Bottom Connector Locations

![Circuit board layout diagram with labeled components A through L, showing various circuit blocks and connections.](.dlap-5200-50m-00125-2000-10/4993ae68a8c48d3c06a6b17f1ad3e3eecd0cf4102ba50b7bd300f0460a7d49f4.jpg)

Figure 5: Mainboard top connectors

Table 1: Mainboard top connector legend

<table><tr><td>A</td><td>Power FW Update Connector (Debug)</td></tr><tr><td>B</td><td>M.2 M Key</td></tr><tr><td>C</td><td>CPU Socket</td></tr><tr><td>D</td><td>DDR5 SODIMM1</td></tr><tr><td>E</td><td>DDR5 SODIMM3</td></tr><tr><td>F</td><td>Flash ROM Socket (Debug)</td></tr><tr><td>G</td><td>DCIN Connector</td></tr><tr><td>H</td><td>HDMI + DP</td></tr><tr><td>I</td><td>HDMI + DP</td></tr><tr><td>J</td><td>RJ45 + USB 3.0 x2</td></tr><tr><td>K</td><td>RJ45 + USB 3.0 x2</td></tr><tr><td>L</td><td>RJ45 + USB 3.0 x2</td></tr><tr><td>M</td><td>External Power Connector</td></tr></table>

![A\nB\nC\nD\nE\nF\nH\nG\nM N\nK\nJ\nP\nQ\nI\nT\nR\nU\nS\nV](.dlap-5200-50m-00125-2000-10/7a020a64d95aab7e821de9f227014f3a038f911c3f18e58ac5977405c70d7591.jpg)

Figure 6: Mainboard bottom connectors

Table 2: Mainboard bottom connector legend

<table><tr><td>A</td><td>SATA connector for 2.5&quot; SSD</td></tr><tr><td>B</td><td>USB 2.0 dongle</td></tr><tr><td>C</td><td>SATA connector for 2.5&quot; SSD</td></tr><tr><td>D</td><td>PCIE GEN5 slot for BP Board</td></tr><tr><td>E</td><td>M.2 E Key</td></tr><tr><td>F</td><td>System Fan Connector</td></tr><tr><td>G</td><td>DDR5 SODIMM2</td></tr><tr><td>H</td><td>DDR5 SODIMM4</td></tr><tr><td>I</td><td>PCIE GEN4 + Power slot for BP Board</td></tr><tr><td>J</td><td>External Power Connector for AFM Board</td></tr><tr><td>K</td><td>I2C Wafer 2 (I2C1)</td></tr><tr><td>L</td><td>I2C Wafer 1 (I2C0)</td></tr><tr><td>M</td><td>SIM connector for M.2</td></tr><tr><td>N</td><td>SIM connector for M.2</td></tr><tr><td>O</td><td>RTC Battery Connector</td></tr><tr><td>P</td><td>Wafer for Speaker Out</td></tr><tr><td>Q</td><td>M.2 B Key</td></tr><tr><td>R</td><td>B2B Connector for AFM Board</td></tr><tr><td>S</td><td>DB40 Connector (Debug)</td></tr><tr><td>T</td><td>Wafer for COM5, 6 + DIDO + MIC + HP</td></tr><tr><td>U</td><td>Wafer for COM1, 2, 3, 4</td></tr><tr><td>V</td><td>External Power Connector for BP Board</td></tr><tr><td>X</td><td>External Power/Reset button</td></tr></table>

This page intentionally left blank.

# 4 Connectors and Jumpers

# 4.1 Front/Side I/O Connectors and Jumpers

# 4.1.1 Antenna Ports

Antenna ports ANT1-4 support 5G (PN: 30-60192-0000-A0), while ports ANT5-6 support Wi-Fi 2.4GHz/5GHz (PN: 30-60125-1000- B0).

# 4.1.2 Power Button

The power button is a non-latched push button with a blue LED indicator.

<table><tr><td>System Status</td><td>Power LED</td></tr><tr><td>System turns on</td><td>Light ON</td></tr><tr><td>Suspend (S3)</td><td>Blinking</td></tr><tr><td>Hibernation (S4)</td><td>Blinking</td></tr><tr><td>Power OFF (S5)</td><td>Light OFF</td></tr></table>

# 4.1.3 LED Indicators

In addition to the power button LED, six LEDs on the front panel indicate the following.

<table><tr><td>LED Indicator</td><td>Location</td><td>Color</td><td>Description</td></tr><tr><td>Watchdog (WD)</td><td>Top Right</td><td>Yellow</td><td>Indicates watchdog timer status. When watchdog timer starts, the LED will be on until system boot up success. When system does not boot up and the timer is expired, the system will automatically reboot.</td></tr><tr><td>Hard disk drive (HD)</td><td>Middle Right</td><td>Orange</td><td>When blinking, indicates the SATA HDD is active.</td></tr><tr><td>Diagnostic (DG)</td><td>Bottom Right</td><td>Green</td><td>If lit continuously, indicates no physical storage is connected. If blinking, indicates no memory is installed on either SODIMM socket.</td></tr><tr><td>User define (U1)</td><td>Top Left</td><td>Green</td><td>User define LED</td></tr><tr><td>User define (U2)</td><td>Middle Left</td><td>Green</td><td>User define LED</td></tr><tr><td>User define (U3)</td><td>Bottom Left</td><td>Green</td><td>User define LED</td></tr></table>

# 4.1.4 External Power Button Connector

The DLAP-5200 Series provides an external power button connector to remotely power on/off the platform.

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>PWR_BTN-L</td></tr><tr><td>2</td><td>GND</td></tr></table>

![This is a black-and-white line drawing, appearing to be an architectural floor plan or schematic. It features a large square outline containing an inner square structure. Inside the central area, there are two smaller squares positioned side-by-side; the number '1' appears in large, bold font to the right of the right-hand square. Rectangular sections or alcoves are visible at the top and bottom of the inner structure. Below the main diagram, there is a horizontal strip containing a series of small, indistinct rectangular shapes.](.dlap-5200-50m-00125-2000-10/23b3a280cdefa7c9912b56da9c466e77b25450e18ad3862685d73179855be697.jpg)

# 4.1.5 Reset Button

The reset button executes a hard reset for the DLAP-5200 Series.

# 4.1.6 DisplayPort Connectors

Two DisplayPort connectors on the front panel can connect to VGA, DVI, HDMI and DisplayPort monitors via DisplayPort to VGA adapter cable, DisplayPort to DVI adapter cable, or DisplayPort to HDMI adapter cable and DisplayPort cable.

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>CN_DDPx0+</td><td>11</td><td>GND</td></tr><tr><td>2</td><td>GND</td><td>12</td><td>CN_DDPx3-</td></tr><tr><td>3</td><td>CN_DDPx0-</td><td>13</td><td>CN_DDPx_AUX_SEL</td></tr><tr><td>4</td><td>CN_DDPx1+</td><td>14</td><td>CN_DDPx_CONFIG2</td></tr><tr><td>5</td><td>GND</td><td>15</td><td>CN_DDPx_AUX+</td></tr><tr><td>6</td><td>CN_DDPx1-</td><td>16</td><td>GND</td></tr><tr><td>7</td><td>CN_DDPx2+</td><td>17</td><td>CN_DDPx_AUX-</td></tr><tr><td>8</td><td>GND</td><td>18</td><td>CN_DDPx_HPD</td></tr><tr><td>9</td><td>CN_DDPx2-</td><td>19</td><td>GND</td></tr><tr><td>10</td><td>CN_DDPx3+</td><td>20</td><td>+V3.3_DDPx_PWR_CN</td></tr></table>

![19\n1\n20\n2](.dlap-5200-50m-00125-2000-10/0f89abdaf25a97875f588f83b59fc4a94243e059da2093677c02e71115a49482.jpg)

# 4.1.7 HDMI Connector

The DLAP-5200 Series provides one HDMI connector for connection to an external monitor.

<table><tr><td>Pin #</td><td>Signal</td><td>Pin #</td><td>Signal</td></tr><tr><td>1</td><td>CON_HDMI_TX2_P</td><td>2</td><td>GND</td></tr><tr><td>3</td><td>CON_HDMI_TX2_N</td><td>4</td><td>CON_HDMI_TX1_P</td></tr><tr><td>5</td><td>GND</td><td>6</td><td>CON_HDMI_TX1_N</td></tr><tr><td>7</td><td>CON_HDMI_TX0_P</td><td>8</td><td>GND</td></tr><tr><td>9</td><td>CON_HDMI_TX0_N</td><td>10</td><td>CON_HDMI_CLK_P</td></tr><tr><td>11</td><td>GND</td><td>12</td><td>CON_HDMI_CLK_N</td></tr><tr><td>13</td><td>N/C</td><td>14</td><td>N/C</td></tr><tr><td>15</td><td>DVI_SCL_SINK</td><td>16</td><td>DVI_SDA_SINK</td></tr><tr><td>17</td><td>GND</td><td>18</td><td>P_+5V0_HDMI_CN</td></tr><tr><td>19</td><td>CON_HDMI_HPD_5V0</td><td colspan="2"></td></tr></table>

![The image displays a diagram of a rectangular connector socket, featuring a grey upper section and a white lower section. Both sections contain rows of square slots. Text labels indicate specific pin positions:\n\n*   **Top row (left side):** '19' is above the first slot, and '17' is above the second slot.\n*   **Bottom row (left side):** '18' is below the first slot.\n*   **Top row (right side):** '3' is above the second-to-last slot, and '1' is above the last slot.\n*   **Bottom row (right side):** '4' is below the second-to-last slot, and '2' is below the last slot.\n\nTwo small square tabs are visible at the bottom of the white section.](.dlap-5200-50m-00125-2000-10/b2878211601f417bdb6a1c3e0c7839378c4bee24011f3c1d0128af9e82aabfb1.jpg)

# 4.1.8 USB 3.2 Ports

The DLAP-5200 Series provides four USB 3.2 Gen 2 and two USB 3.2 Gen 1 ports supporting Type-A USB 3.2 connection on the front panel. All USB 3.2 ports are compatible with SuperSpeed Gen2, high-speed, full-speed, and low-speed USB devices. USB1 and USB2 Provide 1.6A current. USB3,4 share 1.6A current, USB5,6 share 1.6A current. The full 1.6A current is available if only one port is used.

# 4.1.9 Ethernet Ports

6x Ethernet ports on the front panel support Intel I225- LM supports 2.5Gps.

<table><tr><td>Pin #</td><td>10BASE-T/100BASE-TX</td><td>1000BASE-T</td></tr><tr><td>1</td><td>TX+</td><td>LAN_TX0+</td></tr><tr><td>2</td><td>TX-</td><td>LAN_TX0-</td></tr><tr><td>3</td><td>RX+</td><td>LAN_TX1+</td></tr><tr><td>4</td><td>—</td><td>LAN_TX2+</td></tr><tr><td>5</td><td>—</td><td>LAN_TX2-</td></tr><tr><td>6</td><td>RX-</td><td>LAN_TX1-</td></tr><tr><td>7</td><td>—</td><td>LAN_TX3+</td></tr><tr><td>8</td><td>—</td><td>LAN_TX3-</td></tr></table>

<table><tr><td>Speed LEDGreen/Orange</td><td>Active/LinkYellow</td></tr></table>

![A black and white line drawing depicts a schematic diagram, likely representing a piano. The image features a large rectangular outline. At the top, there are three rectangular shapes: two smaller ones at the corners and one in the center. Below this is a large central rectangle. The bottom section consists of a long rectangle filled with a row of vertical lines, resembling a keyboard. The number '8' is visible on the left side, and the number '1' is visible on the right side.](.dlap-5200-50m-00125-2000-10/5efa467e5c8ab472b1312204bc6b2c3b8ec0ca3774b9d55ab863ec0e10cdd6e0.jpg)

# Active/Link LED Indicators

<table><tr><td>LED Color</td><td>Status</td><td>Description</td></tr><tr><td rowspan="3">Yellow</td><td>OFF</td><td>Ethernet port is disconnected.</td></tr><tr><td>ON</td><td>Ethernet port is connected with no activity.</td></tr><tr><td>Flashing</td><td>Ethernet port is connected and active.</td></tr></table>

# Speed LED Indicators

<table><tr><td>LED Color</td><td>Status</td><td>Description</td></tr><tr><td rowspan="3">Green/Orange</td><td>OFF</td><td>10/100 Mbps</td></tr><tr><td>Green</td><td>1000 Mbps</td></tr><tr><td>Orange</td><td>2500 Mbps</td></tr></table>

# 4.1.10 DC Power Input

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>V+ (DC_IN)</td></tr><tr><td>2</td><td>V- (DGND)</td></tr></table>

![9-32 VDC\nV+ V-](.dlap-5200-50m-00125-2000-10/616d03a0011ec3937e2a72840741525e14122473501b72b32550c450c0aaa312.jpg)

Refer to section 5.2: Attach DC Power Connector to install the DC Power Connector to the DC Power Input.

Use an approved power source as certified by IEC or UL. If you need an adaptor, optional accessories, or further assistance, con- tact ADLINK for further information. The maximum operational altitude is 2000 m with an output that meets LPS and SELV (ES1) circuits.

# Power Source Rating

<table><tr><td></td><td>Voltage</td><td>Current</td></tr><tr><td>DC Power Source</td><td>9 to 32V DC</td><td>16A to 4.2A min.</td></tr><tr><td>AC-to-DC Adapter</td><td>24V DC</td><td>6.25A min.</td></tr></table>

![The image displays a standard warning symbol consisting of a red equilateral triangle with rounded corners. Inside the triangle is a centered white exclamation point. The symbol is set against a white background, bordered by thin black vertical lines on the far left and right edges.](.dlap-5200-50m-00125-2000-10/24423033c0075502f6c98197fdc2c6c860914f56aa63944273be94e277f93bab.jpg)
WARNING:

Before providing DC power, ensure the voltage and polarity pro- vided are compatible with the DC input. Improper input voltage and/or polarity can cause system damage.

AVERTISSEMENT: Avant de fournir de l'énergie DC à cet appar- eil, veuillez vous assurer que la tension et la polarité fournies sont compatibles avec l'entrée DC. Une tension d'entrée et/ou polarité incorrectes peuvent causer des dommages au système.

# 4.1.11 COM Port Connectors

The DLAP-5200 Series provides four COM ports through D-sub 9- pin connectors. The COM1 & COM2 ports support RS-232/422/ 485 modes by BIOS setting, while COM3 and COM4 support only RS-232.

<table><tr><td rowspan="2">Pin</td><td colspan="3">Signal Name</td></tr><tr><td>RS-232</td><td>RS-422</td><td>RS-485</td></tr><tr><td>1</td><td>DCD#</td><td>TXD422-</td><td>485DATA-</td></tr><tr><td>2</td><td>RXD</td><td>TXD422+</td><td>485DATA+</td></tr><tr><td>3</td><td>TXD</td><td>RXD422+</td><td>N/S</td></tr><tr><td>4</td><td>DTR#</td><td>RXD422-</td><td>N/S</td></tr><tr><td>5</td><td>GND</td><td>N/S</td><td>N/S</td></tr><tr><td>6</td><td>DSR#</td><td>N/S</td><td>N/S</td></tr><tr><td>7</td><td>RTS#</td><td>N/S</td><td>N/S</td></tr><tr><td>8</td><td>CTS#</td><td>N/S</td><td>N/S</td></tr><tr><td>9</td><td>RI#</td><td>N/S</td><td>N/S</td></tr></table>

![1 1\n5 5\n6 9](.dlap-5200-50m-00125-2000-10/f8f495a2ae283b3544fadbf3acfb1101ba3d91b782f1362953dc047eb60c22f9.jpg)

# 4.2 Internal I/O Connectors and Jumpers

# 4.2.1 SATA Connector

The SATA connector supports transfer up to 6.0Gb/s (600MB/s).

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>GND</td></tr><tr><td>2</td><td>TXP</td></tr><tr><td>3</td><td>TXN</td></tr><tr><td>4</td><td>GND</td></tr><tr><td>5</td><td>RXN</td></tr><tr><td>6</td><td>RXP</td></tr><tr><td>7</td><td>GND</td></tr></table>

![The image displays a technical line drawing labeled with the number **1** in the top left corner. It depicts a rectangular connector housing with a small notch at the top center. Inside the housing, nested lines outline an internal rectangular cavity. A horizontal dashed line runs through the center of this cavity. On the far left side, angled lines suggest mounting features or a latch mechanism.](.dlap-5200-50m-00125-2000-10/2386a1b73a57a96738b43fac0359a065854139af5a96494d9cf9928fcab280cf.jpg)

# 4.2.2 12V Fan Connector

DC 12V fan module power supply is provided through the connector, to which the optional fan module connects when installed in the chassis.

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>FAN_GND</td></tr><tr><td>2</td><td>12V IN PWR</td></tr><tr><td>3</td><td>FAN TACH</td></tr><tr><td>4</td><td>FAN PWM</td></tr></table>

![The image is a black-and-white line drawing depicting a rectangular outline. Near the top center, inside the border, is a smaller horizontal rectangle. Below this, four squares are arranged in a horizontal row across the middle; each square contains a small circle in its center. In the bottom right corner, just inside the border, the number '1' is visible.](.dlap-5200-50m-00125-2000-10/e832941ad62445d166708e8deaa8605c75ff0aa0a8df9867d67ac6c6b2a7fe35.jpg)

# 4.2.3 External Power/Reset Header

An internal header is provided for the Power and Reset buttons.

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>PWR_BTN-L</td></tr><tr><td>2</td><td>GND</td></tr><tr><td>3</td><td>GND</td></tr><tr><td>4</td><td>RESET_BTN-L</td></tr></table>

![The image shows a black, rectangular frame surrounding a white interior space. In the upper left corner of the white area is the number '1'. Below the number, four black, vertical, rounded rectangular shapes are arranged in a horizontal row. The black border of the frame is thick, particularly on the left side and the top edge.](.dlap-5200-50m-00125-2000-10/a07b6df169f0644a4116547f7e780a48dd5547fb306397177574a3cb88f73302.jpg)

# 4.2.4 I2C Connector

There are two I2C connectors supporting 3.3v or 5v.

<table><tr><td>Pin</td><td>Signal (I2C0)</td><td>Signal (I2C1)</td></tr><tr><td>1</td><td>P_+5V0_S</td><td>P_+5V0_S</td></tr><tr><td>2</td><td>P_+3V3_S</td><td>P_+3V3_S</td></tr><tr><td>3</td><td>PCH_I2C0_SDA_S</td><td>PCH_I2C1_SDA_S</td></tr><tr><td>4</td><td>PCH_I2C0_SCL_S</td><td>PCH_I2C1_SCL_S</td></tr><tr><td>5</td><td>I2C0_GPIO</td><td>I2C1_GPIO</td></tr><tr><td>6</td><td>GND</td><td>GND</td></tr></table>

![Pure electrical connector diagram without any text, numbers, or symbols](.dlap-5200-50m-00125-2000-10/989f611c96d08c6033e197369948b3d25af1f4519d0d8dc39255f6e374a8a0ec.jpg)

# 4.2.5 12V Power for Additional AFM MXM Carrier Board

One 12V power pin header provides additional AFM MXM carrier board power for an MXM card, if used.

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>P_+12V_B</td><td>3</td><td>GND</td></tr><tr><td>2</td><td>P_+12V_B</td><td>4</td><td>GND</td></tr></table>

![This is a black and white floor plan diagram of a rectangular room enclosed by thick black walls. Inside the room, three solid black circles are arranged in a horizontal line near the center. To the right of the circles is a solid black square. Along the bottom edge, there are three small, open rectangular outlines. The number '11' is printed in the upper right corner. Doorways or openings are visible on the far left and right sides of the structure.](.dlap-5200-50m-00125-2000-10/accd2707ae12a3279d92fcecc178d7d3db35fb4a9f92023d99d602007c31ef6b.jpg)

![The image displays a white document icon with a folded upper-right corner and faint horizontal gray lines. A large red checkmark is prominently placed over the center of the document.](.dlap-5200-50m-00125-2000-10/18b894e1de2f894d621a72f28b1c458e56a390cdc0a9ee122c03c22b07f18b35.jpg)
NOTE:

For additional information regarding the AFM MXM carrier board, please contact your ADLINK representative.

# 4.2.6 Micro-SIM Slot

The Micro-SIM slot supports an M.2 B Key.

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>SIM PWR</td></tr><tr><td>2</td><td>REST#</td></tr><tr><td>3</td><td>CLK</td></tr><tr><td>4</td><td>GND</td></tr><tr><td>5</td><td>VPP</td></tr><tr><td>6</td><td>DATA</td></tr></table>

![(13,17)\n(13,80)\n(13,33)\n(0,65) (20)\n(14,5) (20)\n(1,00) (20)\n(14,85) (20)\n(15,35) (20)](.dlap-5200-50m-00125-2000-10/91788c1e607348ed744363b73e1064a0bdb7fd78a2b6268862d69810f707978f.jpg)

# 5 Getting Started

# 5.1 Package Contents

Before unpacking, check the shipping carton for any damage. If the shipping carton and/or contents are damaged, inform your dealer immediately. Retain the shipping carton and packing mate- rials for inspection. Obtain authorization from your dealer before returning any product to ADLINK. Ensure that the following items are included in the package.

DLAP-5200 controller
Accessory pack
Screw pack for wall-mounting and SSD installation

# 5.2 Attach DC Power Connector

Locate the DC power connector shown below that is included in the Accessory Box. Insert it into the DC Power Input “A” and secure it to the chassis using the captive screws.

![Close-up of a green plastic electronic component with three pins (no text or symbols visible)](.dlap-5200-50m-00125-2000-10/6f173377a545c2fb0c11d5d5b7e492ac51ab6be5686655fb75cf475db07ed193.jpg)

Connect a DC power source as described in Section 4.1.10: DC Power Input to the inputs of the DC power connector, making sure to use the correct input voltage and polarity.

![The image shows a red triangular warning sign with a white exclamation point in the center. Below the symbol, the text 'WARNING:' is written in black capital letters. A small portion of text is visible at the very bottom edge.](.dlap-5200-50m-00125-2000-10/f6d25862a1b655504b8174893f87ff4506e7e3c71e649c8e5585428aeb46e473.jpg)

Before providing DC power, ensure the voltage and polarity provided are compatible with the DC input. Improper input voltage and/or polarity can be responsible for system damage.

AVERTISSEMENT: Avant de connecter à une source de courant continu, veuillez vous assurer de la polarité de la tension confor- mément à l'entrée CC du PC. Une tension et/ou une polarité incorrectes peuvent causer des dommages irréversibles sur le système.

# 5.3 Mounting the DLAP-5200 Series

# 5.3.1 Install a Solid-State Drive (SSD)

Follow these steps to install a solid-state drive (SSD).

1. Use a Phillips-head screwdriver to remove the bottom cover foot pads and screws as shown.

![Front view of a mechanical or electronic component with horizontal grooves and mounting holes, marked by red circles (no text or symbols)](.dlap-5200-50m-00125-2000-10/3fab79614f2dcddd8f86102573ed6e06d9f625b6177805ce6a19bcdcdcedcd16.jpg)

2. Lift off the rear heatsink to remove it.

![Interior view of an electronic device showing a green circuit board, RAM slots, and a central processor (no readable text or symbols)](.dlap-5200-50m-00125-2000-10/d1cb57517be90b7b28624b13b1cafc4b70c0265b4fe2f7b632bc6c5d2d034456.jpg)

3. Loosen the 4 set screws, and then pull the SSD tray to remove it.

![2.5'\nSATA SSD\nASP\nPowered by ADLINK](.dlap-5200-50m-00125-2000-10/17fe09a4fa153d8b46ebee0f1a9006492568c3e41cec5242659982f0c0402bc1.jpg)

4. Use the included M3 screws to attach a $_ { 2 . 5 " }$ SSD to the tray.

![256GB\nTranscend®\nTS256GSSD460K\n2.5' SATA3 SSD\nWAN 57C35481E04AC0756\nS/N:1H6435-0038\n03-2022\nDC+9Y+550-5A\nFW:9Y100640\nRHS:90000000000\nN=50557 855859\nCEUKFIC 10 NAMS\nMade in Taiwan\n256GB](.dlap-5200-50m-00125-2000-10/74671cfe3171754a16dda81f06366142e2f33ed7bb6d0caaa4fe8a6e1a1696eb.jpg)

5. Align the SSD bracket using the guide pins, and then gently push the drive assembly into the SATA connector on the PCB. Tighten the 4 setscrews to lock the SSD into place.

![2.5'\nSATA SSD\nPowered by ADLINK](.dlap-5200-50m-00125-2000-10/22ff06897a94c835a57d067862f38cd0b937fd54638b35404af3e64d4878f216.jpg)

![ASP\nPowered by ADLINK\n2.5'\nSATA SSD](.dlap-5200-50m-00125-2000-10/9557ef80c69aa249c08ef01f1c82c782f50814904a591f0f6be8a24f4dc3eff7.jpg)

# 5.3.2 Install SODIMM Memory

Follow these steps to install SODIMM memory.

1. Make sure the SODIMM connectors are clear of any thermal pads.

![Internal view of an electronic device showing a green circuit board, RAM slots, and a black ASP+ power card with red triangular overlay (no readable text or symbols)](.dlap-5200-50m-00125-2000-10/c19eb79ddbb1ba9726b80f579b498e78e1e82575c18f8c9b62915b88a3e4c3d9.jpg)

2. Attach the included thermal pads to the main board under the location of the SODIMM modules. Make sure the thermal pads DO NOT contact the connector pins. Install the SODIMM modules.

![Close-up of a green printed circuit board with two blue rectangular components and gold connectors (no visible text or symbols)](.dlap-5200-50m-00125-2000-10/031bab7dbf8967a8ecc839bd0e82cbf50cba99422157f8750f694935e439e5e2.jpg)

![Close-up of a green printed circuit board with multiple microcontroller modules and connectors (no visible text or symbols)](.dlap-5200-50m-00125-2000-10/220477d35d4b0c901ea3681cb2a82ed8c293269a0bcbbd2a4afd897013edeac2.jpg)

# 5.3.3 Install the wall-Mount Brackets

Follow these steps to install the wall-mount bracket.

1. Use the 6 M4 screws shipped with the controller to attach the 2 included wall mount brackets to the chassis as shown.

![Technical diagram of a mechanical component with mounting holes and striped pattern (no text or symbols)](.dlap-5200-50m-00125-2000-10/e9e57c274576cf818f3050fc636b9cd31776949d8df1eaba70529aad1995fd96.jpg)

![The image shows a white document icon with a folded top-right corner and horizontal gray lines. A large red checkmark is superimposed over the center of the document.](.dlap-5200-50m-00125-2000-10/aeb65554319d1d5ca66bf161ee8ad7fa992c634b2962d0ca9c103d13e7590f5f.jpg)
NOTE:

Refer to Chapter 3, Mechanical Layout, for dimensions on wall mounting hole placement.

# 5.4 Driver Installation

Download the drivers for your system from the product page at https://www.adlinktech.com/products/Industrial\_PCs\_Fanless\_Embedded\_PCs/IPCSystems/DLAP-5200\_Series

This page intentionally left blank.

# 6 Appendix A Power

![The image shows a white document icon with a folded top-right corner and horizontal lines representing text. A large, bold red checkmark is overlaid on the document.](.dlap-5200-50m-00125-2000-10/9734cc81217c4777c200c5fe4f6c41afe71942deffb01b00c2a1cdf31afa1896.jpg)
NOTE:

The information in this Appendix is for power budget planning and design purposes only. Actual power consumption may differ based on final application.

# 6.1 Power Consumption Reference

Power consumption as follows is based on lab data in which 24V DC is applied and current is measured by the DC power supply. The power consumption (W) is calculated as the product of applied voltage (V) and the current (A).

Platforms tested for this data have available external I/O interfaces and are attached to supported devices such as DP and HDMI monitors, keyboard/mouse, USB dummy load, COM loopback, with an internal hard disk drive installed.

Information is presented for reference only. Actual power consumption will vary with different attached devices and operating system.

<table><tr><td>System</td><td>Power Off</td><td>System Idle</td><td>Processor Full Load</td><td>System Full Load</td><td>Recommended Power Supply</td></tr><tr><td>DLAP-5209Intel Core i9-12900E</td><td>3.7W</td><td>59.4W</td><td>101W</td><td>147W</td><td>280W</td></tr></table>

![The image displays a graphic icon of a white document or piece of paper with the top-left corner folded down (a 'dog-ear'). Faint, horizontal gray lines run across the paper, suggesting text. A large, bold red checkmark is superimposed over the center of the document.](.dlap-5200-50m-00125-2000-10/787cde25823fdd8ae0e497a07665004a9870dc8b023ba69e5d6f040ef0d0dc14.jpg)
NOTE:

Sufficient power supply for the entire system is required to meet these specifications. At least 100W at 24V input is recommended.
Heat generated by add-on PCI/PCIe adapters affects thermal stability. Additional heat dissipation is required when the system operates at high temperatures or in harsh environments with add-on adapters.

This page intentionally left blank.

# 7 Appendix B BIOS Setup

The Basic Input/Output System (BIOS) is a program that provides a basic level of communication between the processor and peripherals. In addition, the BIOS also contains codes for various advanced features applied to the DLAP-5200. The BIOS Setup program includes menus for configuring settings and enabling features of the DLAP-5200. Most users do not need to use the BIOS Setup program, as the DLAP-5200 ships with default settings that work well for most configurations.

Enter BIOS Setup by selecting DEL when the system is powered on the POST (Power On Self Test) message is displayed. The DLAP-5200 controller supports one-time Boot Menu allowing selection of boot device. Enter the Boot Menu by selecting F7 at POST.

![The image displays a white icon of a document with a folded upper-right corner. A large red checkmark is superimposed over the center of the document. The document features horizontal gray lines that represent text lines, but no specific readable words are present.](.dlap-5200-50m-00125-2000-10/412a84fe0e8d493ab54e2664fabdcbe3aa2e6ef9fd21ff132f47f62900818488.jpg)
NOTE:

• BIOS options listed are for reference only.
• Different configurations can affect BIOS behavior.
Displayed material may reflect only the BIOS version corresponding to initial release and may differ from that of the purchased motherboard.
• Users are welcome to download the latest BIOS version from our official website.

# 7.1 Main

<table><tr><td colspan="2">Main Advanced Chipset Security Boot Save &amp; Exit MEBx</td></tr><tr><td>BIOS Information</td><td></td></tr><tr><td>BIOS Vendor</td><td>American Megatrends</td></tr><tr><td>BIOS Version</td><td>1.01.10</td></tr><tr><td>Build Date</td><td>02/06/2023</td></tr><tr><td>MRC Version</td><td>0.0.4.6</td></tr><tr><td>GOP Version</td><td>17.0.1077</td></tr><tr><td>ME FW Version</td><td>16.1.25.1885</td></tr><tr><td>System Information</td><td></td></tr><tr><td>Project Name</td><td>MVP-6200</td></tr><tr><td>CPU Board Version</td><td>A2</td></tr><tr><td>CPU Brand String</td><td>12th Gen Intel(R) Core(
TM) i9-12900E</td></tr><tr><td>Stepping</td><td>C0</td></tr><tr><td>GT Info</td><td>0x4680</td></tr><tr><td>CPU Frequency</td><td>2.30GHz</td></tr><tr><td>Total Memory</td><td>16384 MB (DDR5)</td></tr><tr><td>Memory Frequency</td><td>3600 MHz</td></tr><tr><td>PCH SKU</td><td>R680E</td></tr><tr><td>Stepping</td><td>B1</td></tr><tr><td>System Date</td><td>[Tue 02/07/2023]</td></tr><tr><td>System Time</td><td>[17:27:55]</td></tr><tr><td>Access Level</td><td>Administrator</td></tr></table>

Contains basic system information for the DLAP-5200.

![The image displays a dark red, upward-pointing triangle centered on a white background. Inside the triangle is a white exclamation mark. A thin black horizontal line runs across the very top edge of the image.](.dlap-5200-50m-00125-2000-10/20b884440cea07397f2de7418e8e15e0359c35d9e92ed33ac9bbf9fff94d0ce6.jpg)
WARNING:

Changing BIOS settings may lead to incorrect controller behavior and possible inability to boot.

# BIOS Information

Shows current system BIOS Vendor, BIOS Version, Build Date, MRC Version, GOP Version and ME FW Version.

# System Information

Shows current system Project Name, CPU Board Version, CPU Branding String, CPU Stepping, GT Info, CPU Frequency, Total Memory, Memory Frequency, PCH SKU and Stepping.

# System Time/System Date

Allows adjustment of system time and date, as follows.

1. Highlight System Time or System Date using the up and down &lt;Arrow&gt; keys.
2. Enter new values using the keyboard and select &lt;Enter&gt;.
3. Select &lt; Tab &gt; to move between fields.

![The image displays a graphic icon of a document. It features a white sheet of paper with a folded top-left corner and horizontal lines representing text. A large red checkmark is superimposed over the document.](.dlap-5200-50m-00125-2000-10/295693ae762b4c38fabe11bf3810b4362d9cabdf9bd1771d191ab68d05330c51.jpg)
NOTE:

The date must be entered in MM/DD/YY format, and the time in HH:MM:SS. The time is in 24-hour format. For example, 5:30 A.M. appears as 05:30:00, and 5:30 P.M. as 17:30:00.

# 7.2 Advanced

<table><tr><td colspan="2">Aptio Setup - AMI</td></tr><tr><td colspan="2">Main Advanced Chipset Security Boot Save &amp; Exit MEBx</td></tr><tr><td>CPU Configuration
Power Management
Serial Console Redirection
USB Configuration
TPM 2.0 Configuration
Onboard Devices Configuration
NCT6126D Hardware Monitor
BIOS Watchdog Timer
Network Stack Configuration
Intel(R) Ethernet Controller (3) I225-IT - 00:30:64:84:D7:24
Intel(R) Ethernet Controller (3) I225-IT - 00:30:64:84:D7:25
Intel(R) Ethernet Controller (3) I225-IT - 00:30:64:84:D7:26</td><td>CPU Configuration</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10:Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

![A yellow triangular warning sign with a black border featuring a black exclamation point in the center.](.dlap-5200-50m-00125-2000-10/617503758054e7c9532fd441419cdb0806b0441a33cb1697a555e0a355119f40.jpg)
CAUTION:

Setting incorrect or conflicting values in Advanced BIOS Setup may cause system malfunction.

Accesses advanced options of the DLAP-5200.

# 7.2.1 CPU Configuration

![Advanced\nCPU Configuration\nCPU Brand String 12th Gen Intel(R)\nCore(TM) i9-12900E\nPackage Not Implemented Yet\nStepping C0\nNumber of Efficient-cores 8Core(s) / 8Thread(s)\nNumber of Performance-cores 8Core(s) / 16Thread(s)\nID 0x90672\nMicrocode Revision 23\nSpeed 2300 MHz\nL1 Data Cache 48 KB x 8\nL1 Instruction Cache 32 KB x 8\nL2 Cache 1280 KB x 8\nL3 Cache 30 MB\nVMX Supported\nSMX/TXT Supported\nHyper-Threading (Enabled)\nActive Performance-cores (All)\nActive Efficient-cores (All)\nIntel (VMX) Virtualization (Enabled)\nTechnology\nIntel Trusted Execution Technology (Disabled)\nIntel(R) SpeedStep(tm) (Disabled)\nEnable or Disable\nHyper-Threading Technology.\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10:Save & Exit\nESC: Exit\nVersion 2.22.1286 Copyright (C) 2023 AMI](.dlap-5200-50m-00125-2000-10/12dfefbcbcf1c2e8079baef17632606c0f6d5b0fce5a8c401c7de881bdb7748c.jpg)

# Hyper-Threading

Enabled for Windows and Linux (optimized for Hyper-Threading Technology) and Disabled for other OS (not optimized for Hyper- Threading Technology). When Disabled only one thread per enabled core is enabled.

# Active Performance-Cores

Number of P-cores to enable in each processor package. Note: Number of Cores and E-cores are looked at together. When both are {0,0}, Pcode will enable all cores.

# Active Efficient-Cores

Number of E-cores to enable in each processor package. Note: Number of Cores and E-cores are looked at together. When both are {0,0}, Pcode will enable all cores.

# Intel (VMX) Virtualization Technology

When enabled, a VMM can utilize the additional hardware capabil- ities provided by Vanderpool Technology.

# Intel Trusted Execution Technology

Enables utilization of additional hardware capabilities provided by Intel(R) Trusted Execution Technology. Changes require a full power cycle to take effect.

# Intel® SpeedStep™

Allows more than two frequency ranges to be supported.

# Intel® Speed Shift Technology

Enables/disables Intel® Speed Shift Technology support. Enabling will expose the CPPC v2 interface to allow hardware controlled P- states.

# C States

Enable/Disable CPU Power Management. Allows CPU to go to C states when it is not 100% utilized.

# TCC Activation Offset

Offset from factory set TCC activation temperature at which the Thermal Control Circuit must be activated. TCC will be activated at: TCC Activation Temp - TCC Activation Offset. TCC Activation Offset range is 0 to 63.

# 7.2.2 Power Management

![Aptio Setup - AMI\nAdvanced\nPower Management\nState After G3 (Last State)\nRTC Wake system from S5 (Disabled)\nPCIe Wake (Enabled)\nSpecify what state to go to when power is re-applied after a power failure (G3 state).\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10:Save & Exit\nESC: Exit\nVersion 2.22.1286 Copyright (C) 2023 AMI](.dlap-5200-50m-00125-2000-10/4a51355beafb365a8a2566687fdc5f7835da78854db5205857e8f71fd2accf44.jpg)

# State After G3

Specifies the state to go to when power is re-applied after a power failure (G3 state).

# RTC Wake system from S5

Enable or disable System wake on alarm event. Select FixedTime for the system to wake at the hr::min::sec specified. Select DynamicTime for the system to wake at the current time + Increase minute(s).

# PCIe Wake

Enables/disables PCI Express wake capability.

# 7.2.3 Serial Console Redirection

![Advanced\nAptio Setup - AMI\nSerial Console Redirection\nCOM1\nConsole Redirection (Disabled)\n► Console Redirection Settings\nConsole Redirection Enable or\nDisable.\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10:Save & Exit\nESC: Exit\nVersion 2.22.1286 Copyright (C) 2023 AMI](.dlap-5200-50m-00125-2000-10/43bf69dc471c7a00507ea1109a1ad477c086b30352d54ac5bad4f24f9b42ee90.jpg)

# COM1

# Console Redirection

Enables/disables SIO COM1 Console Redirection.

# Console Redirection Settings

Specify how the host computer and the remote computer (in use) exchange data. Both computers should have the same or compatible settings.

# 7.2.4 USB Configuration

<table><tr><td colspan="2">Advanced Aptio Setup - AMI</td></tr><tr><td>USB Configuration
USB Module Version 28
USB Controllers:
1 XHCI
USB Devices:
1 Drive, 1 Keyboard, 1 Mouse
USB Mass Storage Driver Support [Enabled]</td><td>Enable/Disable USB Mass
Storage Driver Support.</td></tr><tr><td>USB hardware delays and time-outs:
USB transfer time-out [20 sec]
Device reset time-out [20 sec]
Device power-up delay [Auto]</td><td rowspan="2">+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr><tr><td>Mass Storage Devices:
SanDisk [Auto]</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

# USB Mass Storage Driver Support

Enables/disables USB mass storage driver support.

# USB transfer time-out

The time-out value for Control, Bulk, and Interrupt transfers.

# Device reset time-out

USB mass storage device Start Unit command time-out.

# Device power-up delay

Maximum time the device will take before it properly reports itself to the Host Controller, where Auto uses default value for Root port 100ms, and for Hub port the delay is taken from Hub descriptor.

# 7.2.5 TPM 2.0 Configuration

<table><tr><td colspan="2">Aptio Setup - AMI</td></tr><tr><td>TPM 2.0 Configuration
TPM 2.0 Device Found
Firmware Version: 7.85
Vendor: IFX
Security Device Support [Enable]
Active PCR banks SHA256
Available PCR banks SHA256
SHA256 PCR Bank [Enabled]
Pending operation [None]
Platform Hierarchy [Enabled]
Storage Hierarchy [Enabled]
Endorsement Hierarchy [Enabled]
Physical Presence Spec Version [1.3]
TPM 2.0 InterfaceType [TIS]
PH Randomization [Enabled]</td><td>Enables or Disables BIOS support for security device.
O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available.
+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

# Security Device Support

Enables/disables BIOS support for security device. OS will not show Security Device. TCG EFI protocol and INT1A interface will not be available.

# SHA256 PCR Bank

Enables/disables SHA256 PCR Bank.

# Pending Operation

Schedules Operation for the Security Device. Computer will reboot during restart in order to change State of Security Device.

# Platform Hierarchy

Enables/disables Platform Hierarchy.

# Storage Hierarchy

Enables/disables Storage Hierarchy.

# Endorsement Hierarchy

Enables/disables Endorsement Hierarchy.

# Physical Presence Spec Version

Directs OS to support PPI Spec Version 1.2 or 1.3. Some HCK tests may not support 1.3.

# TPM 2.0 Interface Type

Select the Communication Interface to TPM 20 Device.

# PH Randomization

Enables or Disables Platform Hierarchy randomization. DO NOT ENABLE THIS QUESTION IN PRODUCTION PLATFORMS. THIS IS FOR DEVELOPMENT TESTING. OVERRIDE Change-

PlatformAuth ELINK for production platforms supporting TXT.

# 7.2.6 Onboard Devices Configuration

<table><tr><td colspan="2">Onboard Devices Configuration Serial Port Configuration COM1 Mode Control [RS232] COM1 Device Settings IO=3F8h; IRQ=4; COM2 Mode Control [RS232] COM2 Device Settings IO=2F8h; IRQ=3; COM3 Device Settings IO=3E8h; IRQ=7; COM4 Device Settings IO=2E8h; IRQ=7; COM5 Device Settings IO=2F0h; IRQ=7; COM6 Device Settings IO=2E0h; IRQ=7; Lan Port Configuration LAN #1 [Enabled] LAN #2 [Enabled] LAN #3 [Enabled]</td><td>Select COM1 mode. RS232, RS422, RS485 ++: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F8: Previous Values F9: Optimized Defaults F10:Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="3">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

# COM1 Mode Control

Selects COM1 mode from RS232, RS422 or RS485.

# COM2 Mode Control

Selects COM2 mode from RS232, RS422 or RS485.

# LAN #1 (Intel I225)

Enables/disables I225 LAN1.

# LAN #2 (Intel I225)

Enables/disables I225 LAN2.

# LAN #3 (Intel I225)

Enables/disables I225 LAN3.

# 7.2.7 NCT6126D HW Monitor

<table><tr><td colspan="2">Aptio Setup - AMI</td></tr><tr><td>NCT6126D Hardware Monitor
CPU temperature : +57 %
Board temperature : +36 %
System Fan Speed : 1075 RPM
Backplane Fan Speed : 1121 RPM
System Fan Control Mode [Auto Mode]</td><td>Configure Fan Control Mode.
Select Maunal Mode, user can configure a fix fan duty.
Select SMART FAN IV, user can configure 4 temperatures and 4 fan duties. Select Auto Mode, FAN will run at automatic speed with thermal.</td></tr><tr><td>VCORE : +0.872 V
+12V_A : +12.096 V
+5V0_S : +5.005 V
+1V8_A : +1.824 V
+3V3_SIO_AVSB : +3.344 V
+3V3_VBAT_SIO : +3.056 V</td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10:Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

Displays CPU/Board Temperatures, System/Backplane fan speeds, and various voltages.

# System Fan Control Mode

Configures fan control mode from Manual Mode, Auto Mode, and SMART FAN IV.

# Manual Mode

<table><tr><td colspan="2">Advanced Aptio Setup - AMI</td></tr><tr><td>NCT6126D Hardware Monitor
CPU temperature : +52 °
Board temperature : +33 °
System Fan Speed : 1145 RPM
Backplane Fan Speed : 1125 RPM
System Fan Control Mode [Manual mode]
Duty Cycle 128
VCORE : +0.880 V
+12V_A : +12.096 V
+5V0_S : +5.005 V
+1V8_A : +1.824 V
+3V3_SIO_AVSB : +3.360 V
+3V3_VBAT_SIO : +3.056 V</td><td>Configure Fan Control Mode.
Select Maunal Mode, user can configure a fix fan duty.
Select SMART FAN IV, user can configure 4 temperatures and 4 fan duties. Select Auto Mode, FAN will run at automatic speed with thermal.
+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

Allows configuration of a set fan duty cycle.

# Auto Mode

Fan runs at automatic speed for optimal thermal solution.

<table><tr><td colspan="2">Advanced Aptio Setup - AMI</td></tr><tr><td>NCT6126D Hardware Monitor CPU temperature : +57 % Board temperature : +36 % System Fan Speed : 1075 RPM Backplane Fan Speed : 1121 RPM System Fan Control Mode [Auto Mode] VCORE : +0.872 V +12V_A : +12.096 V +5V0_S : +5.005 V +1V8_A : +1.824 V +3V3_SIO_AVSB : +3.344 V +3V3_VBAT_SIO : +3.056 V</td><td>Configure Fan Control Mode. Select Maunal Mode, user can configure a fix fan duty. Select SMART FAN IV, user can configure 4 temperatures and 4 fan duties. Select Auto Mode, FAN will run at automatic speed with thermal. ++: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F8: Previous Values F9: Optimized Defaults F10:Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

# SMART FAN IV

Four temperatures and four fan duties can be user-configured.

![Advanced\nNCT6126D Hardware Monitor\nCPU temperature : +53 °\nBoard temperature : +33 °\nSystem Fan Speed : 1125 RPM\nBackplane Fan Speed : 1120 RPM\nSystem Fan Control Mode (SMART FAN IV)\nTemperature 1 44\nFAN Duty 1 77\nTemperature 2 49\nFAN Duty 2 103\nTemperature 3 54\nFAN Duty 3 154\nTemperature 4 59\nFAN Duty 4 205\nCritical temperature 63\nVCORE : +0.880 V\n+12V_A : +12.096 V\n+5V0_S : +5.005 V\nConfigure Fan Control Mode.\nSelect Maunal Mode, user can\nconfigure a fix fan duty.\nSelect SMART FAN IV, user can\nconfigure 4 temperatures and 4\nfan duties. Select Auto Mode,\nFAN will run at automatic\nspeed with thermal.\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10:Save & Exit\nESC: Exit\nVersion 2.22.1286 Copyright (C) 2023 AMI](.dlap-5200-50m-00125-2000-10/1b44d8b582452efa2d0e3597022c41dd943391218f67abe429e8e64c0d12184a.jpg)

# 7.2.8 BIOS Watchdog Timer

![Aptio Setup - AMI\nAdvanced\nBIOS Watchdog Timer\nBIOS POST Watchdog (Disabled)\n1. Disable: Disable WatchDog\nTimer; 2. Second Mode: Enable\nWatchdog Timer in second mode;\n3. Minute Mode: Enable\nWatchdog Timer in minute mode.\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.22.1286 Copyright (C) 2023 AMI](.dlap-5200-50m-00125-2000-10/a4909ae0e854344656396caab45943dd502bd46cdd909cbd6674befe01e2c990.jpg)

# BIOS POST Watchdog

Disable disables Watchdog Timer, Second Mode enables Watch- dog Timer in second mode, Minute Mode enables Watchdog Timer in minute mode.

# 7.2.9 Network Stack Configuration

<table><tr><td>Advanced</td><td colspan="2">Aptio Setup - AMI</td></tr><tr><td>Network Stack</td><td>[Disabled]</td><td>Enable/Disable UEFI Network Stack</td></tr><tr><td></td><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10:Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="3">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

# Network Stack

Enables/disables UEFI Network Stack.

# 7.2.10 Intel® Ethernet Controller (3) I225-IT

<table><tr><td>Advanced</td><td>Aptio Setup - AMI</td><td></td></tr><tr><td>UEFI Driver Device Name Link Status MAC Address</td><td>Intel(R) 2.5G Ethernet Controller 0.10.04 Intel(R) Ethernet Controller (3) I225-IT [Disconnected] 00:30:64:84:D7:24</td><td>+: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F8: Previous Values F9: Optimized Defaults F10:Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="3">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

Displays UEFI Driver, Device Name, Link Status and MAC Address.

# 7.3 Chipset

![Aptio Setup - AMI\nMain Advanced Chipset Security Boot Save & Exit MEBx\n► System Agent (SA) Configuration\n► PCH-IO Configuration\n► BackPlane PCIe Configuration\nPCH digital I/O device (Disabled)\nSystem Agent (SA) Parameters\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10:Save & Exit\nESC: Exit\nVersion 2.22.1286 Copyright (C) 2023 AMI](.dlap-5200-50m-00125-2000-10/82da5fedbe26b9364c774440d3811347c3b171a5e89f5db5179d1d0d21afd097.jpg)

![The image shows a red triangular warning sign containing a white exclamation mark in the center. To the right of the triangle is a vertical black line.](.dlap-5200-50m-00125-2000-10/d3b4ddb2d29725ed03521236feccb047af11d903ae0875ca8e9b6334161f60ab.jpg)
WARNING:

Setting incorrect or conflicting values in Chipset BIOS Setup may cause system malfunction.

# 7.3.1 System Agent (SA) Configuration

![Chipset\nSystem Agent (SA) Configuration\nVT-d                    Supported\n► Memory Configuration\n► Graphics Configuration\n► DMI/DPI Configuration\nVT-d                    (Enabled)\nMemory Configuration Parameters\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10:Save & Exit\nESC: Exit\nVersion 2.22.1286 Copyright (C) 2023 AMI](.dlap-5200-50m-00125-2000-10/d5ac5fb8f8c88d01c847037f2a0e95b3bab76aaa2d26f06dd88b28e138633fda.jpg)

# System Agent (SA) Configuration

Displays and configures VT-d capability and provides settings for Memory, Graphics, and DMI/OPI configuration.

# Memory Configuration

<table><tr><td colspan="2">Chipset Aptio Setup - AMI</td></tr><tr><td>Memory Configuration</td><td></td></tr><tr><td>Memory RC Version 0.0.4.6
Memory Frequency 3600 MHz
tCL-tRCD-tRP-tRAS 30-29-29-58
MC 0 Ch 0 DIMM 0 Not Populated / Disabled
MC 0 Ch 0 DIMM 1 Not Populated / Disabled
MC 1 Ch 0 DIMM 0 Populated &amp; Enabled
Size 16384 MB (DDR5)
Number of Ranks 1
Manufacturer Transcend
MC 1 Ch 0 DIMM 1 Not Populated / Disabled</td><td></td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10:Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

# Memory Configuration

Displays memory speed, size, maker, and configuration.

# Graphics Configuration

<table><tr><td colspan="2">Chipset Aptio Setup - AMI</td></tr><tr><td>Graphics Configuration
Primary Display [IGFX]
Internal Graphics [Enabled]
GTT Size [8MB]
Aperture Size [256MB]
DVMT Pre-Allocated [32M]</td><td>Select which of IGFX/PEG/PCI Graphics device should be Primary Display Or select HG for Hybrid GFX.</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

# Primary Display

Select which of IGFX/PEG/PCI Graphics device should be the Primary Display.

# Internal Graphics

Keeps IGFX enabled based on Setup options.

# GTT Size

Selects GTT Size.

# Aperture Size

Selects Aperture Size.

# DVMT Pre-Allocated

Selects DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphics Device.

# DMI/OPI Configuration

![Aptio Setup - AMI\nChipset\nDMI/OPI Configuration\nDMI X8 Gen4\nDMI Max Link Speed (Gen4)\nSet DMI Speed Gen1/Gen2/Gen3\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10:Save & Exit\nESC: Exit\nVersion 2.22.1286 Copyright (C) 2023 AMI](.dlap-5200-50m-00125-2000-10/44b48be8fe91dfdcb133ebd17b89e6c0c996cf352900ec92f7c5c4d1b9808ef0.jpg)

# DMI/OPI Configuration

Displays DMI link speed and width.

# DMI Max Link Speed

Sets DMI Speed to Gen1/Gen2/Gen3/Gen4.

# 7.3.2 PCH-IO Configuration

<table><tr><td colspan="2">Chipset Aptio Setup - AMI</td></tr><tr><td>PCH-IO Configuration
► SATA Configuration
► NVMe Configuration
► VMD setup menu
► Security Configuration</td><td>SATA Device Options Settings</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10:Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

# PCH-IO Configuration

Configures SATA, NVMe, VMD, and Secruity.

# SATA Configuration

<table><tr><td colspan="2">Chipset Aptio Setup - AMI</td></tr><tr><td>SATA Configuration</td><td rowspan="9">Determines how SATA controller(s) operate.</td></tr><tr><td>SATA Mode Selection [AHCI]</td></tr><tr><td>SATA Controller Speed [Gen3]</td></tr><tr><td>SATA HDD 1 Empty</td></tr><tr><td>SATA HDD 1 [Enabled]</td></tr><tr><td>SATA HDD 2 Empty</td></tr><tr><td>SATA HDD 2 [Enabled]</td></tr><tr><td>M.2 SATA Empty</td></tr><tr><td>M.2 SATA [Enabled]</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10:Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

# SATA Mode Selection

Determines how SATA controller(s) operate.

# SATA Controller Speed

Sets maximum speed the SATA controller can support.

# SATA HDD 1

Enables/disables SATA HDD 1.

# SATA HDD 2

Enables/disables SATA HDD 2.

# M.2 SATA

Enables/disables M.2 SATA.

# NVMe Configuration

![Aptio Setup - AMI\nChipset\nNVMe Configuration\nNo NVME Device Found\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.22.1286 Copyright (C) 2023 AMI](.dlap-5200-50m-00125-2000-10/3ff886122f35d206f2759f1d48a91dab51ddc9a46149c77a916adab06c6d5b9a.jpg)

Displays NVMe device status.

# VMD Setup Menu

<table><tr><td colspan="2">Chipset Aptio Setup - AMI</td></tr><tr><td>VMD Configuration Enable VMD controller [Enabled] Enable VMD Global Mapping [Enabled] Map this Root Port under VMD [Enabled] Root Port BDF details SATA Controller RAID0 [Enabled] RAID1 [Enabled] RAID5 [Enabled] RAID10 [Enabled] Intel Rapid Recovery Technology [Enabled] RRT volumes can span internal and eSATA drives [Enabled] Intel(R) Optane(TM) Memory [Enabled]</td><td>Enable/Disable System Acceleration with Intel(R) Optane(TM) Memory feature. +: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F8: Previous Values F9: Optimized Defaults F10:Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

# Enable VMD controller

Enable/Disable VMD controller.

# Enable VMD Global Mapping

Enable/Disable VMD Global Mapping.

# RAID0

Enable/Disable RAID0 support.

# RAID1

Enable/Disable RAID1 support.

# RAID5

Enable/Disable RAID5 support.

# RAID10

Enable/Disable RAID10 support.

# Intel Rapid Recovery Technology

Enable/Disable Intel Rapid Recovery Technology.

# RRT volumes can span internal and eSATA drives

Enable/Disable RRT volumes can span internal and eSATA drives.

# Intel® Optane™ Memory

Enable/Disable System Acceleration with Intel® Optane™ Memory feature.

# Security Configuration

![Aptio Setup - AMI\nChipset\nSecurity Configuration\nBIOS Lock (Enabled)\nEnable/Disable the PCH BIOS\nLock Enable feature. Required\nto be enabled to ensure SMM\nprotection of flash.\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10:Save & Exit\nESC: Exit\nVersion 2.22.1286 Copyright (C) 2023 AMI](.dlap-5200-50m-00125-2000-10/836144b1857c4b7c82b8916167bda1f00d73a9bee5735e88dd12f0eea43a7f5a.jpg)

# BIOS Lock

Enables/disables PCH BIOS Lock Enable. Required to be enabled to ensure SMM flash protection.

# 7.3.3 PCH Digital I/O Device

Disable/Enable ACPI GPIO Device support for PCH digital I/O and user LED.

# 7.4 Security

<table><tr><td colspan="2">Aptio Setup - AMI</td></tr><tr><td colspan="2">Main Advanced Chipset Security Boot Save &amp; Exit MEBx</td></tr><tr><td>Password Description
If ONLY the Administrator&#x27;s password is set, then this only limits access to Setup and is only asked for when entering Setup.
If ONLY the User&#x27;s password is set, then this is a power on password and must be entered to boot or enter Setup. In Setup the User will have Administrator rights.
The password length must be in the following range:
Minimum length 3
Maximum length 20
Administrator Password
User Password
Secure Boot menu</td><td>Set Administrator Password
+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10:Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

If only the Administrator password is set, access is limited and the password requested on Setup. If User password is set, it acts as a power-on password and must be entered to boot or enter setup.

# Administrator Password

Sets Administrator Password.

# User Password

Sets User Password.

# Secure Boot Menu

Configures Secure Boot.

# 7.4.1 Secure Boot Menu

<table><tr><td colspan="2">Aptio Setup - AMI</td></tr><tr><td>Security</td><td></td></tr><tr><td>Secure Boot</td><td rowspan="7">Secure Boot feature is Active if Secure Boot is Enabled, Platform Key(PK) is enrolled and the System is in User mode. The mode change requires platform reset</td></tr><tr><td>System Mode User</td></tr><tr><td>Secure Boot Not Active</td></tr><tr><td>Vendor Keys Valid</td></tr><tr><td>Secure Boot Control [Disabled]</td></tr><tr><td>Secure Boot Mode [Standard]</td></tr><tr><td>Key Management</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10:Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

# Secure Boot Control

Active if Secure Boot is Enabled, Platform Key (PK) is enrolled and the System is in User mode. Mode change requires platform reset.

# Secure Boot Mode

Selects from Standard or Custom. In Custom, Secure Boot Policy variables can be configured by a physically present user without full authentication.

# Key Management

Enables expert users to modify Secure Boot Policy variables with- out full authentication.

# 7.5 Boot

<table><tr><td colspan="2">Aptio Setup - AMI</td></tr><tr><td colspan="2">Main Advanced Chipset Security Boot Save &amp; Exit MEBx</td></tr><tr><td>Boot Configuration
Setup Prompt Timeout 1
Bootup NumLock State [Off]
Quiet Boot [Enabled]
Fast Boot [Disable Link]</td><td>Number of seconds to wait for setup activation key. The maximum value is 8</td></tr><tr><td>Boot Configuration
Boot Option #1 [Hard Disk]
Boot Option #2 [NVME]
Boot Option #3 [UEFI AP]
Boot Option #4 [CD/DVD]
Boot Option #5 [SD]
Boot Option #6 [USB Hard Disk]
Boot Option #7 [USB CD/DVD]
Boot Option #8 [USB Key:UEFI: SanDisk, Partition 1]
Boot Option #9 [USB Floppy]
Boot Option #10 [USB Lan]
Boot Option #11 [Network]</td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10:Save &amp; Exit
ESC: Exit</td></tr><tr><td>UEFI USB Key Drive BBS Priorities</td><td></td></tr></table>

# Setup Prompt Timeout

Number of seconds to wait for setup activation key. The maximum value is 8.

# Bootup Num-Lock State

Sets keypad Number Lock status following boot.

Quiet Boot

<table><tr><td>Option</td><td>Description</td></tr><tr><td>Disabled</td><td>Directs BIOS to display POST messages</td></tr><tr><td>Enabled</td><td>Directs BIOS to display the OEM logo.</td></tr></table>

Fast Boot

<table><tr><td>Option</td><td>Description</td></tr><tr><td>Disabled</td><td>Directs BIOS to perform all POST tests.</td></tr><tr><td>Enabled</td><td>Directs BIOS to skip certain POST tests to boot faster.</td></tr></table>

While enabling Fast Boot can reduce system ready time, some prerequisites can reduce effectiveness.

# Boot Configuration

Specifies the priority of boot devices, all of which are detected during POST and displayed. Target Boot Option # and click to select the desired device.

# UEFI USB Hard Drive Disk Drives BBS Priorities

Specifies Boot Device Priority sequence from available UEFI USB Drives.

# 7.6 Save & Exit

<table><tr><td colspan="2">Main Advanced Chipset Security Boot Save &amp; Exit MEBx</td></tr><tr><td rowspan="2">Save Changes and Exit
Discard Changes and Exit
Save Changes and Reset
Discard Changes and Reset
Save Options
Save Changes
Discard Changes
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
UEFI: SanDisk, Partition 1 (SanDisk)
Launch EFI Shell from filesystem device</td><td>Exit system setup after saving the changes.</td></tr><tr><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr></table>

# Save Changes and Exit

Exits system setup after saving the changes.

# Discard Changes and Exit

Exits system setup without saving any changes.

# Save Changes and Reset

Resets the system setup after saving changes.

# Discard Changes and Reset

Resets system setup without saving any changes.

# Save Changes

Saves Changes so far to any of the setup options.

# Discard Changes

Discards Changes so far to any of the setup options.

# Restore Defaults

Sets all BIOS options to default settings, designed for maximum system stability but less than maximum performance. Select Restore Defaults if the computer encounters system configuration problems.

# Save as User Defaults

Saves all changes so far as User Defaults.

# Restore User Defaults

Restores user defaults to all setup options.

# Launch EFI Shell from filesystem device

Attempts to launch EFI Shell application (Shell.efi) from one of the available filesystem devices.

# 7.7 MEBx

Intel® AMT

Enable/Disable Intel® AMT support.

Intel® AMT Configuration

Select Intel® AMT configurations in BIOS.

This page intentionally left blank.

# 8 Appendix C Watchdog Timer (WDT) Function Library

This appendix describes use of the watchdog timer (WDT) function library for the DLAP-5200 controller. The watchdog timer is a hardware mechanism provided to reset the system if the operating system or an application stalls. After starting, the watchdog timer in the application must be periodically reset before the timer expires. Once the watchdog timer expires, a hardware-generated signal is sent to reset the system.

# 8.1 WDT with API/Windows

The WDT API library files and a demo program (incl. source code) can be downloaded from: https://www.adlinktech.com/products/Industrial\_PCs\_Fanless\_Embedded\_PCs/IPCSystems/DLAP-5200\_Series

To use the WDT function library for the DLAP-5200, include the header file WDT.h and linkage library WDT.lib in the C++ project.

# InitWDT

Initializes the watchdog timer function. Must be called before the invocation of any other WDT function.

# Syntax

C/C++

BOOL InitWDT()

# Parameters

None

# Return codes

TRUE if watchdog timer is successfully initialized.

FALSE if watchdog timer fails to initialize.

# SetWDT

Sets the timeout value of the watchdog timer. There are two parameters for this function to indicate the timeout ticks and unit. ResetWDT or StopWDT should be called before the expiration of watchdog timer, or the system will reset.

# Syntax

C/C++

BOOL SetWDT(BYTE tick, BYTE unit)

# Parameters

tick

Specify the number of ticks for watchdog timer. A valid value is 1 - 60.

unit

Specifies the timeout ticks of the watchdog timer.

<table><tr><td>Value</td><td>Description</td></tr><tr><td>0</td><td>The unit for one tick is 1 second. For example, when one tick is specified as 15 and the unit as 0, the timeout value is 15 seconds.</td></tr><tr><td>1</td><td>The unit for one tick is one minute. For example, when one tick is specified as 60 and the unit as 1, the timeout value is 60 minutes.</td></tr></table>

# Return codes

TRUE if timeout value of watchdog timer is successfully set.

FALSE if timeout value of watchdog timer is failed to set.

# StartWDT

Start the watchdog timer function. Once the StartWDT is invoked, the watchdog timer starts. ResetWDT or StopWDT should be called before the expiration of watchdog timer, or the system will reset.

# Syntax

C/C++

BOOL StartWDT()

# Parameters

None

# Return codes

TRUE if watchdog timer is successfully started.

FALSE if watchdog timer is failed to start.

# ResetWDT

Reset the watchdog timer. The invocation of ResetWDT allows restoration of the watchdog timer to the initial timeout value specified in SetWDT function. ResetWDT or StopWDT should be called before the expiration of the watchdog timer, or the system will reset.

# Syntax

C/C++

BOOL ResetWDT()

# Parameters

None

# Return codes

TRUE if watchdog timer is successfully reset.

FALSE if watchdog timer fails to reset.

# StopWDT

Stops the watchdog timer.

#

C/C++

BOOL StopWDT()

# Parameters

None

# Return codes

TRUE if watchdog timer is successfully stopped.

FALSE if watchdog timer fails to stop.

# 8.2 WDT with DOS/Linux

Under Linux, please program the WDT function using the eSPI IO registers according to the sample program as follows.

```c
#include &lt;dos.h&gt;
#include &lt;stddef.h&gt;
#include &lt;stdio.h&gt;
/* Config NCT6126D to enter config mode */
EnterConfig(void)
{
    outp(0x4E, 0x87);
    outp(0x4E, 0x87);
}
/* Config to exit config mode */
ExitConfig(void)
{ outp(0x4E, 0xAA);
}
/* Read byte */
unsigned char r_reg(unsigned char regoffset)
{ outp(0x4E, regoffset);
return inp(0x4F); }
/* Write byte */
void w_reg(unsigned char regoffset, unsigned char data)
{ outp(0x4E, regoffset); outp(0x4F, data);
}
main(void)
{
    unsigned int count;
    /* print program title */
printf("----DLAP-5200 WDT Demo----
---- \n");

    printf("Init and config GPIO
    ports&lt;&lt;&lt;&lt;###
    printf("----
    ----\n");
    EnterConfig();
    /* config WDT registers */
    w_reg(0x07, 0x08);
    /* enable keyboard interrupt to reset WDT timeout
```

```c
value */
w_reg(0xF2, r_reg(0xF2) | 0x40);
/* set unit as second */

w_reg(0xF0, r_reg(0xF0) &~0x04);
/* start the Watchdog */

w_reg(0x30, 0x01);
/* set timeout value as 30 seconds */
/* WDT start automatically while timeout value is set */
w_reg(0xF1, 0x1E);

printf("----\n");
printf("WDT is set and counting down now. &lt;&lt; &lt;&lt; &lt;&lt; &lt;&lt; &lt;&lt; &lt;&lt; &lt;&lt; &lt;&lt; \n");
printf("----\n");
for (count=30; count!=0; count--)
{ printf("Countdown %2d : .\n", count);
/* reset WDT timeout value to 10 seconds */
/* w_reg(0x73, 0x0A); */
sleep(1);
}
/* disable WDT */
/* WDT stop while timeout value is set to zero */
w_reg(0x30, 0x00);

printf("WDT is disable. Program is terminating.");
ExitConfig();
return 0;
}
```

# 9 Appendix D Digital Input/Output Function Library

DI/O provides input/output to support inter-device communication. Simple programming guides allow easy transmission of digital signals between the system and attached peripherals.

# DI/O with API/Windows

Matrix DI/O API library files and a demo program (incl. source code) can be downloaded from http://www.adlinktech.com.

To use the DI/O function library for DLAP-5200 series, include the header file awl.h and linkage library awl.lib in the C++ project. DI/O functions are as follows.

# AwlDioGetValue

Reads the digital logic state of a digital input line.

# Syntax

C/C++

int stdcall AwlDioGetValue(int Index)

# Parameter(s)

Index

Indexes the digital logic state of DLAP-5200 digital input channels 1 to 8 (bit 0 to 7)

# Return codes

0: Operation Success

-1: Operation Failed

# AwlDioSetValue

Sets the digital logic state of the digital output line.

# AwlDioGetValue

Reads the digital logic state of a digital input line.

# Syntax

C/C++

int stdcall AwlDioGetValue(int Index , int Value)

# Parameter(s)

Index

Indexes the digital logic state of DLAP-5200 digital input channels 1 to 8 (bit 0 to 7)

Value

Sets the digital logic state of DLAP-5200 digital output channels 1 to 8 (bit 0 to 7) to 0 or 1.

# Return codes

0: Operation Success

-1: Operation Failed

# Safety Instructions

For user safety, please read and follow all instructions, Warnings, Cautions, and Notes marked in this manual and on the associated device before handling/operating the device, to avoid injury or damage.

S'il vous plaît prêter attention stricte à tous les avertissements et mises en garde figurant sur l'appareil , pour éviter des blessures ou des dommages.

► Read these safety instructions carefully.
► Keep the User’s Manual for future reference.
► Read the Specifications section of this manual for detailed information on the recommended operating environment.
► The device can be operated at an ambient temperature of 50ºC.
► When installing/mounting or uninstalling/removing device; or when removal of a chassis cover is required for user servicing:

[&gt; Turn off power and unplug any power cords/cables.

[> Reinstall all chassis covers before restoring power.

► To avoid electrical shock and/or damage to device:

[> Keep device away from water or liquid sources.
[> Keep device away from high heat or humidity.
[> Keep device properly ventilated (do not block or cover ventilation openings).
[> Always use recommended voltage and power source settings.
[> Always install and operate device near an easily accessible electrical outlet.
[> Secure the power cord (do not place any object on/over the power cord).
[> Only install/attach and operate device on stable surfaces and/or recommended mountings.

► If the device will not be used for long periods of time, turn off and unplug from its power source.
► Never attempt to repair the device, which should only be serviced by qualified technical personnel using suitable tools.
► A Lithium-type battery may be provided for uninterrupted backup or emergency power.

![A yellow triangle with a black border containing a black exclamation mark in the center.](.dlap-5200-50m-00125-2000-10/cbfbb46f01995643cb85c4e0e641853921212f88c180f1ad85d746455f46db21.jpg)
CAUTION:

Risk of explosion if battery is replaced with one of an incorrect type; please dispose of used batteries appropriately.

Risque d’explosion si la pile est remplacée par une autre de type incorrect. Veuillez jeter les piles usagées de façon appropriée.

► The device must be serviced by authorized technicians when:

[> The power cord or plug is damaged.
[> Liquid has entered the device interior.
[> The device has been exposed to high humidity and/or moisture.
[> The device is not functioning or does not function according to the User’s Manual.
[> The device has been dropped and/or damaged and/or shows obvious signs of breakage.

► Disconnect the power supply cord before loosening the thumbscrews and always fasten the thumbscrews with a screwdriver before starting the system up.

► It is recommended that the device be installed only in a server room or computer room where access is:

[> Restricted to qualified service personnel or users familiar with restrictions applied to the location, reasons therefore, and any precautions required.

[> Only afforded by the use of a tool or lock and key, or other means of security, and controlled by the authority responsible for the location.

► If PoE (Power over Ethernet) is enabled for the device, the system can ONLY be deployed indoors. Unless otherwise noted, the PoE system is NOT designed to withstand the rigors of outdoor use.

<table><tr><td>&lt;img src="images/dedf3ca9890fc9601ddbec81294eb6d1a5eb56a87c2cacce37cafa1bc12bfd07.jpg"/&gt;</td><td>BURN HAZARDTouching this surface could result in bodily injury.To reduce risk, allow the surface to cool before touching.RISQUE DE BRÛLURESNe touchez pas cette surface, cela pourrait entraîner des blessures.</td></tr></table>

# Getting Services

Ask an Expert: https://www.adlinktech.com/en/Askanexpert

# ADLINK Technology, Inc.

Address: No. 66, Huaya 1st Road, Guishan District Taoyuan City 333, Taiwan

Tel: +886-3-216-5088

Fax: +886-3-328-5723

Email: service@adlinktech.com

# Ampro ADLINK Technology, Inc.

Address: 6450 Via Del Oro, San Jose, CA 95119-1208, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

Fax: +1-408-600-1189

Email: info@adlinktech.com

# ADLINK Technology (China) Co., Ltd.

Address: 300 Fang Chun Rd., Zhangjiang Hi-Tech Park, Pudong New Area Shanghai, 201203 China

Tel: +86-21-5132-8988

Fax: +86-21-5132-3588

Email: market@adlinktech.com

# ADLINK Technology GmbH

Address: Hans-Thoma-Strasse 8-10, 68163 Mannheim, Germany

Tel: +49-621-43214-0

Fax: +49-621 43214-30

Email: emea@adlinktech.com

Please visit the Contact page at www.adlinktech.com for information on how to contact the ADLINK regional office nearest you.
[🔗 Link to the original document](.dlap-5200-50m-00125-2000-10/dlap-5200-50m-00125-2000-10.pdf)