# DLAP-8000 Series

High Performance

9th Generation Intel® Xeon®/Core™ i7/i5/i3 Processor

Edge Workstation Computer

User's Manual

![Front view of a black hardware server with ADLINK branding and multiple ports (no readable text beyond branding)](.dlap-8000-50-1z238-1000-10/befb445c4f42c3ed868b146e18ac8141262e748954f643af93de03f58cc0d353.jpg)

Manual Rev.: 1.0

Revision Date: Nov. 18, 2020

Part No: 50-1Z238-1000

Revision History

<table><tr><td>Revision</td><td>Release Date</td><td>Description of Change(s)</td></tr><tr><td>1.0</td><td>Nov. 18, 2020</td><td>Initial release</td></tr></table>

# Preface

# Copyright © 2020 ADLINK Technology Inc.

This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

# Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

# Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.

![Symbol of a trash bin crossed with a diagonal line and a horizontal bar below (no text or labels)](.dlap-8000-50-1z238-1000-10/5f28a05db990aabb39e4f9cfdb35ab7489af1febe2daf699cf89b5c4b3926221.jpg)

Battery Labels (for products with battery)

![Symbol of a trash bin crossed out by two diagonal lines (no text or numbers present)](.dlap-8000-50-1z238-1000-10/bacb586ba22f0437f6d988a742c6162f8ef48647fdb09f8dd012b3fab6c62baf.jpg)

![Recycling symbol icon with three chasing arrows inside a square frame (no text or labels)](.dlap-8000-50-1z238-1000-10/de81aaa17b37087106c72c660fec40173b162bf325db798c0a2c4ad2ce2bc38c.jpg)

Li-ion

![RECYCLE\nRBRC\nLi-ion\n1.800.822.8837](.dlap-8000-50-1z238-1000-10/e28a766340c83135a9542abf20a34551c61f151105aa45a769d6481219106f36.jpg)

![Abstract geometric pattern with interlocking X and Y shapes (no text or symbols)](.dlap-8000-50-1z238-1000-10/0a8e518716686e22a228a147986c80243cb49af3a3353e8d391b1d927815d01d.jpg)

廢電池請回收

# California Proposition 65 Warning

![A yellow triangular warning sign with a thick black border, containing a large black exclamation point in the center.](.dlap-8000-50-1z238-1000-10/016f844e79b85996eb226bf52aff7704331c7f78f452d06bbcd9603e4aa95ddd.jpg)

WARNING: This product can expose you to chemicals including acrylamide, arsenic, benzene, cadmium, Tris(1,3-dichloro-2-propyl) phosphate (TDCPP), 1,4- Dioxane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and vinyl materials, which are known to the State of California to cause cancer, and acrylamide, benzene, cadmium, lead, mercury, phthalates, toluene, DEHP, DIDP, DnHP, DBP, BBP, PVC, and vinyl materials, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

# Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

# Conventions

Take note of the following conventions used throughout this manual to make sure that users perform certain tasks and instructions properly.

![The image depicts a white piece of paper with a folded upper-left corner and horizontal lines representing text. A large red checkmark is superimposed over the center.](.dlap-8000-50-1z238-1000-10/0aa5004a8c6ded9cc4f5ba283ea6ad5b8ab3b9e263482d7dfb60c9ac79880d89.jpg)
NOTE:

Additional information, aids, and tips that help users perform tasks.

![The image displays a yellow triangular warning sign with a thick black border. In the center of the triangle is a black exclamation point.](.dlap-8000-50-1z238-1000-10/1f194a7d7f0b49d1f25e6d88102a6ffc968be7fffcecec209cf7a94a442a5c02.jpg)
CAUTION:

Information to prevent minor physical injury, component damage, data loss, and/or program corruption when trying to complete a task.

ATTENTION: Informations destinées à prévenir les blessures corporelles mineures, les dommages aux composants, la perte de données et/ou la corruption de programme lors de l'exécution d'une tâche.

![The image displays a standard hazard warning sign. It features a red triangle with a white border. In the center of the red triangle is a large, black exclamation point.](.dlap-8000-50-1z238-1000-10/0687ed9d15d581b49a3f51cc0412de95fd6529cf7ed3851ee164b1c349574146.jpg)
WARNING:

Information to prevent serious physical injury, component damage, data loss, and/or program corruption when trying to complete a specific task.

AVERTISSEMENT: Informations destinées à prévenir les blessures corporelles graves, les dommages aux composants, la perte de données et/ou la corruption de programme lors de l'exécution d'une tâche spécifique.

# Table of Contents

# Preface...... iii

# List of Tables...... vii

# List of Figures ix

# 1 Introduction ...... 1

1.1 Overview.... 1
1.2 Features.... 1
1.3 Packing List 2

# 2 Specifications.... 3

2.1 DLAP-800X/DLAP-8001/DLAP-8002/DLAP-8003 3
2.2 DLAP-8000 Functional Block Diagram 5
2.3 Display Options.... 6
2.4 Mechanical Dimensions.... 7

# 3 System Layout.... 11

3.1 Front Panel 11
3.2 Internal I/O Connectors.... 24

# 4 Getting Started 31

4.1 Attach DC Power Connector 31
4.2 Mounting the DLAP-8000 32
4.3 Driver Installation 34

# A Appendix: Power Consumption....35

A.1 Power Consumption Reference 35

# B Appendix: BIOS Setup 37

B.1 Main 38
B.2 Advanced.... 40

B.3 Chipset.... 57
B.4 Security 72
B.5 Boot 74
B.6 Save & Exit 76

# C Appendix: Watchdog Timer (WDT) Function Library ....79

C.1 WDT with API/Windows 79
C.2 WDT with DOS/Linux 82

# D Appendix: Digital Input/Output Function Library ....85

Important Safety Instructions.... 87

Consignes de Sécurité Importante 89

Getting Service 93

# List of Tables

Table 2-1: Max. Available Resolution Display Configurations.....6

Table 3-1: Front Panel I/O Legend 11

Table 3-2: LED Indicators....12

Table 3-3: DisplayPort Pin Definition 13

Table 3-4: Applicable Cable Types....14

Table 3-5: Digital Input/Output Connector Pin Definition ..... 15

Table 3-6: DVI-D Connector Pin Definition 16

Table 3-7: VGA Connector Pin Definition ..... 17

Table 3-8: Ethernet Port Pin Definition 19

Table 3-9: Active/Link LED Indicators....19

Table 3-10: Speed LED Indicators.... 19

Table 3-11: DC Power Input Pin Definition 20

Table 3-12: Backplane DC Power Input Pin Definition .... 20

Table 3-13: D-Sub 9-pin Signal Function of COM Ports....22

Table 3-14: Mainboard Connector Legend 25

Table 3-15: 5-slot Backplane Board Connector Legend....26

Table 3-16: GPS Module Power Header Pin Definition ..... 27

Table 3-17: 12V Fan Connector Pin Definition 28

Table 3-18: PWR/RESET Header Pin Definition 29

Table 3-19: 12V Power Pin Definition....29

Table A-1: Power Consumption 36

Table A-2: PEG Card Power Consumption 36

This page intentionally left blank.

# List of Figures

Figure 2-1: DLAP-8000 Front View (including wall-mount brackets) . 7

Figure 2-2: DLAP-8000 Left Side View 8

Figure 2-3: DLAP-8000 Right Side View....9

Figure 2-4: DLAP-8000 Top View 10

Figure 3-1: Front Panel I/O 11

Figure 3-2: DisplayPort Connector Pin Definition....13

Figure 3-3: Digital I/O Connector Pin Definition 14

Figure 3-4: Digital Input Circuit....15

Figure 3-5: Digital Output Circuit....16

Figure 3-6: DVI-D Connector Pin Definition 16

Figure 3-7: VGA Connector Pin Definition 17

Figure 3-8: Ethernet Port and LEDs....18

Figure 3-9: DC Power Input 20

Figure 3-10: Backplane DC Power Input....20

Figure 3-11: COM Port Pin Definition....22

Figure 3-12: CFast Host Slot....23

Figure 3-13: Mainboard Connectors .... 24

Figure 3-14: 5-slot Backplane Board Connectors .... 26

Figure 3-15: GPS Module Power Header Pin Definition .... 27

Figure 3-16: 12V Fan Connector Pin Definition .... 28

Figure 3-17: Clear CMOS Jumper Setting 28

Figure 3-18: PWR/RESET Header Pin Definition .... 29

Figure 3-19: 12V Power Pin Definition....29

This page intentionally left blank.

# 1 Introduction

# 1.1 Overview

ADLINK's DLAP-8000 Series of industrial GPU workstations, incorporating Intel® Core™ i7/i5/i3 and Xeon® processors, provides five PCIe slot supporting two FHFL PEG cards, one mini-PCIe slot and single-side access for I/O ports, optimizing easy maintenance in industrial automation environments. The DLAP-8000 series supports DDR4 memory for more powerful computing and the Intel® HD Graphics 630 speeds graphics performance. Along with a versatile I/O array and flexible expansion capacity, the DLAP-8000 Series fully satisfies all the needs of industrial automation (IA) with the performance demanded by vision inspection, motion control, and surveillance applications. Fanless construction not only overcomes contaminant and noise challenges presented by harsh IA environments, the elimination of problematic structural elements that negatively affect MTBF greatly increases lifecycle expectations for the platform.

# 1.2 Features

▶ 9th Gen Intel® Xeon®, Core™ i7/i5/i3 LGA processors with workstation C246 chipset
▶ Dual SODIMMs for up to 64GB DDR4 / ECC options (available on Xeon/i3 SKUs)
Rich I/O: 2x DP++, 1x DVI-I, 3x GbE, 4x COM, 8-ch DI, 8-ch DO, TPM 2.0
▶ 2x USB 3.1 Gen2, 1x USB 3.1 Gen1, 3x USB 2.0
▶ Rich storage: Up to 4 hot swappable 2.5" SATA 6 Gb/s tray with RAID 0/1/5/10 support, CFast, M.2 2280
▶ Embedded expansion: 1x Mini PCIe, 1x M.2 3042, 2x USIM
▶ Front accessible I/O and adaptive Function Module v.2 option

▶ Flexible and powerful PCIe expansions via backplane:

▷ 2x FHFL PCI Express cards (e.g. Quadro RTX 8000) accommodation w/ AUX power inlets

▷ PCIe x8, x1, x4, x8, and x4 signals with physical x16, x4, x8, x16, and x8 slots

▶ Optional AC or DC SKUs in power inputs

# 1.3 Packing List

Before unpacking, check the shipping carton for any damage. If the shipping carton and/or contents are damaged, inform your dealer immediately. Retain the shipping carton and packing materials for inspection. Obtain authorization from your dealer before returning any product to ADLINK. Ensure that the following items are included in the package.

▶ DLAP-8000 Industrial GPU Workstation
▶ Accessory Box

▷ DC power jack
▷ Wall-mount brackets
▷ Screw pack

# 2 Specifications

2.1 DLAP-800X/DLAP-8001/DLAP-8002/DLAP-8003

<table><tr><td></td><td>DLAP-800X</td><td>DLAP-8001</td><td>DLAP-8002</td><td>DLAP-8003</td></tr><tr><td colspan="5">System Core</td></tr><tr><td>Processor</td><td>Intel® Xeon® E-2278GE 80W</td><td>Intel® CoreTM i7-9700TE 35W</td><td>Intel® CoreTM i5-9500TE 35W</td><td>Intel® CoreTM i3-9100TE 35W</td></tr><tr><td>Core #</td><td>8</td><td>8</td><td>6</td><td>4</td></tr><tr><td>Base Freq.</td><td>3.3 GHz</td><td>2.6 GHz</td><td>2.2 GHz</td><td>2.2 GHz</td></tr><tr><td>MAX Turbo Freq.</td><td>4.7 GHz</td><td>4.4 GHz</td><td>3.6 GHz</td><td>3.2 GHz</td></tr><tr><td>Chipset</td><td colspan="4">Intel® C246</td></tr><tr><td>Memory</td><td colspan="4">4GB DDR4 2400MHz, dual SODIMMs, up to 64GBOptional: 8, 16, 32GB DDR4 ECC 2400MHz (Xeon® and i3 support ECC)</td></tr><tr><td colspan="5">I/O Interface</td></tr><tr><td>Display</td><td colspan="4">2x DP++ and 1x DVI-I</td></tr><tr><td>Ethernet</td><td colspan="4">3x Intel® GbE: 2x i211AT + 1x i219 iAMT support</td></tr><tr><td>Serial Ports</td><td colspan="4">COM1/2: RS-232/422/485, COM3/4: RS-232</td></tr><tr><td>USB</td><td colspan="4">2x USB 3.1 Gen 2 + 1x USB 3.1 Gen 1 + 3x USB 2.0,1x internal USB 2.0 dongle</td></tr><tr><td>Audio</td><td colspan="4">Line-out, Mic-in (Optional: speaker-out)</td></tr><tr><td>Mini PCIe</td><td colspan="4">1x Full size (USB 2.0 + PCIe)</td></tr><tr><td>M.2</td><td colspan="4">1x socket, key B+M, 2280/3042: USB 3.1 Gen 1, SATA 6 Gb/s and PCIe x2</td></tr><tr><td>USIM</td><td colspan="4">2 (1 for Mini PCIe and 1 for M.2)</td></tr><tr><td>DI/O</td><td colspan="4">8-ch DI and 8-ch DO</td></tr><tr><td>I2C</td><td colspan="4">2 (3.3V &amp; 5V)</td></tr><tr><td>TPM 2.0</td><td colspan="4">Supported</td></tr><tr><td>Expansion Slots</td><td colspan="4">Physical: 2x PCIe x16, 2x PCIe x8, 1x PCIe x4;Signal: 2x PCIe x8, 2x PCIe x4, 1x PCIe x1</td></tr><tr><td colspan="5">Storage</td></tr><tr><td>2.5" SATA</td><td colspan="4">4x external swappable trays (supports RAID 0, 1, 5, 10)</td></tr><tr><td>CFast</td><td colspan="4">1 Type II</td></tr><tr><td colspan="5">Physical</td></tr><tr><td>Dimensions</td><td colspan="4">210 (W) x 210 (D) x 350 (H) mm (8.27" x 8.27" x 13.8")</td></tr><tr><td>Weight</td><td colspan="4">DC mode: 7 kg (15.43 lbs)AC mode: 9 kg (19.84 lbs)</td></tr><tr><td>Mounting</td><td colspan="4">Wall mount</td></tr><tr><td colspan="5">Power Supply</td></tr><tr><td>DC Input</td><td colspan="4">24V DC</td></tr><tr><td>AC Input</td><td colspan="4">Optional: 80-264V AC</td></tr><tr><td colspan="5">Environmental</td></tr><tr><td>Operating Temperature</td><td colspan="4">Standard: 0°C to 50°C</td></tr><tr><td>Storage Temperature</td><td colspan="4">-40°C to 85°C (-40°F to 185°F) (excluding storage)</td></tr><tr><td>Humidity</td><td colspan="4">approx. 95% @ 40°C (104°F) (non-condensing)</td></tr><tr><td>Vibration</td><td colspan="4">Operating: 3 Grms, 5-500 Hz, 3 axes (w/ SSD/CFast)Operating: 0.3 Grms, 5-500 Hz, 3 axes (w/ HDD)</td></tr><tr><td>Shock</td><td colspan="4">Operating: 30 G, half sine 11ms duration (w/ SSD/CFast)</td></tr><tr><td>ESD</td><td colspan="4">Contact +/-4kV, Air +/-8kV</td></tr><tr><td>EMC</td><td colspan="4">EN61000-6-4/-2, CE &amp; FCC Class A</td></tr><tr><td>Safety</td><td colspan="4">UL/cUL, CB, CCC</td></tr></table>

# 2.2 DLAP-8000 Functional Block Diagram

![Based on the provided block diagram, here are the labeled blocks and their connections:\n\n**Intel® Processor**\n*   Connects to **DDI1** (connected to **DP CN**)\n*   Connects to **DDI2** (connected to **DP CN**)\n*   Connects to **DDI3** (connected to **DP to DVI LS PTN3360**, which connects to **DVI CN**)\n*   Connects to **eDP** (connected to **eDP to VGA PTN3355**, which connects to **VGA**)\n*   Connects to **CH0** (connected to **DDR4 SO-DIMM**)\n*   Connects to **CH1** (connected to **DDR4 SO-DIMM**)\n*   Connects to **PEG (x16)** (connected to **BP Board**)\n*   Connects to **DMI** (connected to **Intel® C246**)\n\n**Intel® C246**\n*   Connects via **PCIe** to **Intel PHY I219** (connected to **RJ45 CN**)\n*   Connects via **PCIe** to **Intel LAN I211** (connected to **RJ45 CN**)\n*   Connects via **PCIe** to **Intel LAN I211** (connected to **RJ45 CN**)\n*   Connects via **PCIe x1 or SATA/USB 2/USB 3 for H310 / PCIe x2 or SATA/USB 2/USB 3 for C246** to **M.2 CN 2280/3042 size**\n*   Connects via **PCIe x1 and USB 2.0** to **Mini PCIe full size**\n*   Connects via **SATA** to **CFast**\n*   Connects via **HDA** to **Audio codec ALC269** (connected to **MIC/HP CN (Cable)**)\n*   Connects via **PCIe x4 (C 246 support)** to **BP Board**\n*   Connects via **PCIe x4 (C 246 support)** to **BP Board**\n*   Connects via **PCIe x1** to **BP Board**\n*   Connects via **SATA x2 (C 246 support)** to **BP Board**\n*   Connects via **USB 2.0 for dongle** to **BP Board**\n*   Connects via **SMBus** to **BP Board**\n*   Connects via **SATA x2 (Colay with onboard SATA)** to **Onboard SATA x2**\n*   Connects via **USB 2.0** and **USB 3.1** to **USB 3.1 Gen2 Type A x 2 (H310 only supports Gen1)**\n*   Connects via **USB 2.0** and **USB 3.1** to **USB 3.1 Gen1 Type A**\n*   Connects via **USB 2.0** to **USB 2.0 Type A x 3**\n*   Connects via **USB 2.0** to **USB 2.0 Dongle**\n*   Connects via **SPI** to **BIOS**\n*   Connects via **GPI/O** to **8DI/8DO CN (Cable)**\n*   Connects via **I2C** to **I2C CN x2**\n*   Connects via **LPC** to **TPM 2.0** and **SIO NCT6106D**\n\n**AFM board**\n*   Connects via **4 PCIe x1 (or 2 PCIe x2)** to **Intel® C246**\n*   Connects via **2 USB 2 and 2 USB 2/USB 3** to **Intel® C246**\n*   Connects via **SMBus** to **Intel® C246**\n*   Connects via **LPC** to **Intel® C246**\n*   Connects via **I2S** to **Intel® C246**\n*   Connects via **SPI** to **Intel® C246**\n*   Connects via **I2C** to **Intel® C246**\n*   Connects via **DP (Colay with DDI2)** to **Intel® C246**\n\n**SIO NCT6106D**\n*   Connects via **UART(cable)** to **2x D-sub (RS232/422/485)**\n*   Connects via **UART(cable)** to **2x D-sub (RS232)**\n*   Connects via **UART(cable)** to **2x D-sub (RS232) optional**\n*   Connects via **FAN** to **FAN CN**](.dlap-8000-50-1z238-1000-10/3081a921276a3d6d2962558da0c469241949a6e43ec42c2d96f9b31e48a9d2b5.jpg)

# 2.3 Display Options

With computing and graphic performance enhancement from its 8th & 9th Generation Intel processors, the DLAP-8000 controller can support or three independent displays, with configurations as follows.

<table><tr><td></td><td>Port</td><td>Resolution</td></tr><tr><td>Display Option 1</td><td>DisplayPort1</td><td>4096x2304@60Hz</td></tr><tr><td>Display Option 2</td><td>DisplayPort2</td><td>4096x2304@60Hz</td></tr><tr><td>Display Option 3</td><td>DVI-D</td><td>1920x1200@60Hz</td></tr><tr><td>Display Option 4</td><td>VGA</td><td>1920x1080@60Hz</td></tr></table>

Table 2-1: Maximum Available Resolution Display Configurations

# 2.4 Mechanical Dimensions

![72.50\n190\n202\n210\n72.50\n95\n6\n350\n380\n393\n5.20\n10\n7.20\n5.20\nunits: mm](.dlap-8000-50-1z238-1000-10/bb8faa2634f262a9d6413ef69d53ba3bec67a02e83c1123093e280aff0492901.jpg)

Figure 2-1: DLAP-8000 Front View (including wall-mount brackets)

![ADLINK\nU3WD\nU2\nU1\nU2\nU1\nVGA\nCFast\nCOM1\nCOM2\nCOM3\nCOM4\nDVO\n210\n(212.80)\n210\n(212)\nunits: mm](.dlap-8000-50-1z238-1000-10/6ac5ca9a5ac20ed0ade63501d1646e8a92b7ee4da34c51b738ea38857be4510a.jpg)

Figure 2-2: DLAP-8000 Left Side View

![210\n210\n(212)\nunits: mm](.dlap-8000-50-1z238-1000-10/5eda4d4586d4b4c1525deebfa008ad7db8ef76eca36430a274b68d7640a45c61.jpg)

Figure 2-3: DLAP-8000 Right Side View

![Matrix\n210\n(212)\nunits: mm](.dlap-8000-50-1z238-1000-10/43422b554b293f994918a02573db7977b07fa0c9361abd6d50232437134c6872.jpg)

Figure 2-4: DLAP-8000 Top View

# 3 System Layout

# 3.1 Front Panel

The DLAP-8000 Series provides the following front panel access features.

![A B C D E F G H I J K\nADLINK\nV+ V+ V- V-\nPEG 24V DC IN\nV+ V- V-\n24V DC IN\n1\n2\nVGA\n1\n2\n3\n4\nU3VD\nU2\nU1\nCFast\nCOM1 COM2 COM3 COM4 DI/O\nO N M L](.dlap-8000-50-1z238-1000-10/76eacf04393995b0cccf688972d597fe2d7376006a6d8fd88c1c21f61a83b70e.jpg)

Figure 3-1: Front Panel I/O

<table><tr><td>A</td><td>DC Power Input</td><td>I</td><td>Extend Power Button</td></tr><tr><td>B</td><td>DisplayPort x2</td><td>J</td><td>Power Button</td></tr><tr><td>C</td><td>DVI-D</td><td>K</td><td>Reset Button</td></tr><tr><td>D</td><td>VGA</td><td>L</td><td>Audio (Mic, Phones/Speaker)</td></tr><tr><td>E</td><td>USB 3.1 Type-A x3 (1, 2, 4)</td><td>M</td><td>Digital Input/Output</td></tr><tr><td>F</td><td>Gigabit Ethernet x3</td><td>N</td><td>CFast</td></tr><tr><td>G</td><td>USB 2.0 Type-A x3 (3, 5, 6)</td><td>O</td><td>COM Port x4</td></tr><tr><td>H</td><td>LED Indicators</td><td colspan="2"></td></tr></table>

Table 3-1: Front Panel I/O Legend

# 3.1.1 Power Button

The power button is a non-latched push button with a blue LED indicator. System is turned on when the button is depressed, and the power LED lights. If the system hangs, depress the button for 5 seconds to turn off the system completely.

# 3.1.2 LED Indicators

In addition to the LED of the power button, three LEDs on the front panel indicate the following.

<table><tr><td>LED Indicator</td><td>Color</td><td>Description</td></tr><tr><td>Watchdog (WD)</td><td>Yellow</td><td>Indicates watchdog timer status. When watchdog timer starts, the LED flashes. When the timer is expired, the LED remains lit..</td></tr><tr><td>Hard disk drive (HD)</td><td>Orange</td><td>Indicates the HDD operating state. When the SATA hard drive or CFast card is active, the LED indicator flashes.</td></tr><tr><td>Diagnostic (DG)</td><td>Green</td><td>When lit continuously, indicates no physical storage is connected, and if blinking, indicates no memory is installed on either SODIMM socket.</td></tr><tr><td>User defined (U1)</td><td>Green</td><td>User defined.</td></tr><tr><td>User defined (U2)</td><td>Green</td><td>User defined.</td></tr><tr><td>User defined (U3)</td><td>Green</td><td>User defined.</td></tr></table>

Table 3-2: LED Indicators

# 3.1.3 PCI Express x16 Slot

Two PCI Express x16 (data bus x8) slots support expansion with standard PCIe Gen3 cards.

# 3.1.4 PCI Express x8 Slot

Two PCI Express x8 (data bus x4) slots support expansion with standard PCIe Gen3 cards.

# 3.1.5 PCI Express x4 Slot

One PCI Express x4 (data bus x1) slot supports expansion with standard PCIe Gen3 cards.

# 3.1.6 Reset Button

The reset button executes a hard reset for the DLAP-8000.

# 3.1.7 DisplayPort Connectors

Two DisplayPort connectors on the front panel can connect to VGA, DVI, HDMI and DisplayPort monitors via DisplayPort to VGA adapter cable, DisplayPort to DVI adapter cable, or DisplayPort to HDMI adapter cable and DisplayPort cable.

![19\n1\n20\n2](.dlap-8000-50-1z238-1000-10/9d862c8d047d2551f2a2663e28a47fc419d0c7035de2c9ead9d5e9fafe678a66.jpg)

Figure 3-2: DisplayPort Connector Pin Definition

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>CN_DDPx0+</td><td>11</td><td>GND</td></tr><tr><td>2</td><td>GND</td><td>12</td><td>CN_DDPx3-</td></tr><tr><td>3</td><td>CN_DDPx0-</td><td>13</td><td>CN_DDPx_AUX_SEL</td></tr><tr><td>4</td><td>CN_DDPx1+</td><td>14</td><td>CN_DDPx_CONFIG2</td></tr><tr><td>5</td><td>GND</td><td>15</td><td>CN_DDPx_AUX+</td></tr><tr><td>6</td><td>CN_DDPx1-</td><td>16</td><td>GND</td></tr><tr><td>7</td><td>CN_DDPx2+</td><td>17</td><td>CN_DDPx_AUX-</td></tr><tr><td>8</td><td>GND</td><td>18</td><td>CN_DDPx_HPD</td></tr><tr><td>9</td><td>CN_DDPx2-</td><td>19</td><td>GND</td></tr><tr><td>10</td><td>CN_DDPx3+</td><td>20</td><td>+V3.3_DDPx_PWR_CN</td></tr></table>

Table 3-3: DisplayPort Pin Definition

<table><tr><td>P/N</td><td>Description</td></tr><tr><td>30-01119-0020</td><td>Passive DisplayPort to HDMI adapter cable</td></tr><tr><td>30-01120-0020</td><td>Passive DisplayPort to DVI adapter cable</td></tr><tr><td>30-01121-0020</td><td>Passive DisplayPort to VGA adapter cable</td></tr><tr><td>30-01157-0020</td><td>Active DisplayPort to DVI adapter cable</td></tr></table>

Table 3-4: Applicable Cable Types

# 3.1.8 Digital I/O Connector

The DLAP-8000 provides 8 channels of non-isolation digital input and 8 channels of non-isolation digital output circuits, with spec and circuits as follows.

# 8-channel Digital Input

▶ VIH: 2 to 5.25V
▶ VIL: 0 to 0.8V

# 8-channel Digital Output

▶ Output type: Open drain N-channel
▶ MOSFET driver with internal pull high of 200Ω resistance.
▶ Source/Sink current for all channels: 24mA
▶ VOH: 2.4 to 5V
▶ VOL: 0 to 0.5V

![9\n1\n26\n19](.dlap-8000-50-1z238-1000-10/e48331d16231fb06b386e0099efbdb2836cc0a789f9b73bab08e09a21b71deab.jpg)

Figure 3-3: Digital I/O Connector Pin Definition

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>DI0</td><td>8</td><td>DI7</td><td>15</td><td>N/C</td><td>22</td><td>DO3</td></tr><tr><td>2</td><td>DI1</td><td>9</td><td>GND</td><td>16</td><td>N/C</td><td>23</td><td>DO4</td></tr><tr><td>3</td><td>DI2</td><td>10</td><td>N/C</td><td>17</td><td>N/C</td><td>24</td><td>DO5</td></tr><tr><td>4</td><td>DI3</td><td>11</td><td>N/C</td><td>18</td><td>GND</td><td>25</td><td>DO6</td></tr><tr><td>5</td><td>DI4</td><td>12</td><td>N/C</td><td>19</td><td>DO0</td><td>26</td><td>DO7</td></tr><tr><td>6</td><td>DI5</td><td>13</td><td>N/C</td><td>20</td><td>DO1</td><td></td><td></td></tr><tr><td>7</td><td>DI6</td><td>14</td><td>N/C</td><td>21</td><td>DO2</td><td></td><td></td></tr></table>

Table 3-5: Digital Input/Output Connector Pin Definition

![+3.3V\n2.2kΩ\nDI_IN\nDIn\n100kΩ\nG\nS\nMOS\nDI_GND](.dlap-8000-50-1z238-1000-10/5ad958d0653bfb47d63ef524643fea05fccf4b744ec7db665e6235e501f3e58e.jpg)

Figure 3-4: Digital Input Circuit

![+3.3V\n+5.0V\n2.2kΩ\n200Ω\nDO_OUT\nD\nG\nS\nMOS\nDOn](.dlap-8000-50-1z238-1000-10/8ef7a19323f7e5df80e8e2a98565aee0b0fa46a7cd0c7b50eb59238b4be8bd0f.jpg)

Figure 3-5: Digital Output Circuit

# 3.1.9 DVI-D Connector

The DLAP-8000 provides one DVI-D connector for connection to an external monitor.

![1 2 3 4 5 6 / 7\n9 10 11 12 13 14 15 16\n7 8 9 10 11 12 13 14 15 16\nC5](.dlap-8000-50-1z238-1000-10/fa39d2bc60ea21facf458e699a0015f9a069e0dc4cc3a479dff99f2d62a4b408.jpg)

Figure 3-6: DVI-D Connector Pin Definition

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>DVldata 2-</td><td>9</td><td>DVldata 1-</td><td>17</td><td>DVldata 0-</td></tr><tr><td>2</td><td>DVldata 2+</td><td>10</td><td>DVldata 1+</td><td>18</td><td>DVldata 0+</td></tr><tr><td>3</td><td>GND</td><td>11</td><td>GND</td><td>19</td><td>GND</td></tr><tr><td>4</td><td>N/C</td><td>12</td><td>N/C</td><td>20</td><td>N/C</td></tr><tr><td>5</td><td>N/C</td><td>13</td><td>N/C</td><td>21</td><td>N/C</td></tr><tr><td>6</td><td>DVIDC clock</td><td>14</td><td>+5V</td><td>22</td><td>GND</td></tr><tr><td>7</td><td>DVIDC data</td><td>15</td><td>GND</td><td>23</td><td>DVI clock +</td></tr><tr><td>8</td><td>N/C</td><td>16</td><td>Hot plug detect</td><td>24</td><td>DVI clock -</td></tr></table>

Table 3-6: DVI-D Connector Pin Definition

# 3.1.10 VGA Connector

![5\n10\n15\n6\n11](.dlap-8000-50-1z238-1000-10/950bfcf79092551739b08c00dc71e7fa0895e5cfd2fa84cd2432f65e282ad360.jpg)

Figure 3-7: VGA Connector Pin Definition

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>G_VGA_R</td></tr><tr><td>2</td><td>G_VGA_G</td></tr><tr><td>3</td><td>G_VGA_B</td></tr><tr><td>4</td><td>N/C</td></tr><tr><td>5</td><td>GND</td></tr><tr><td>6</td><td>GND</td></tr><tr><td>7</td><td>GND</td></tr><tr><td>8</td><td>GND</td></tr><tr><td>9</td><td>N/C</td></tr><tr><td>10</td><td>GND</td></tr><tr><td>11</td><td>N/C</td></tr><tr><td>12</td><td>CRT_DDAT_CN</td></tr><tr><td>13</td><td>G_VGA_HSYNC</td></tr><tr><td>14</td><td>G_VGA_VSYNC</td></tr><tr><td>15</td><td>CRT_DCLK_CN</td></tr></table>

Table 3-7: VGA Connector Pin Definition

# 3.1.11 USB 2.0 Ports

The DLAP-8000 provides three USB 2.0 ports supporting Type A USB connection on the front panel. All USB ports are compatible with high-speed, full-speed and low-speed USB devices. The DLAP-8000 supports multiple boot devices, including USB flash drive, USB external hard drive, USB floppy, USB CD-ROM and others. The boot priority and boot device can be configured in BIOS.

# 3.1.12 USB 3.1 Ports

The DLAP-8000 provides two USB 3.1 Gen2 and one USB 3.1 Gen1 ports supporting Type A USB 3.1 connection on the front panel. All USB 3.1 ports are compatible with SuperSpeed Gen2, high-speed, full-speed, and low-speed USB devices. The H310 SKU supports three USB 3.1 Gen1 ports only.

# 3.1.13 Gigabit Ethernet Ports

Three Gigabit Ethernet ports on the front panel support Intel WGI211AT and WGI219 Gigabit Ethernet PHY controller and connection, providing

▶ IEEE 802.3az Energy Efficient Ethernet
▶ IEEE 1588/802.1AS precision time synchronization
▶ IEEE 802.3Qav traffic shaper
▶ Interrupt moderation, VLAN support, IP checksum offload
▶ RSS and MSI-X to lower CPU utilization in multi-core systems
▶ ECC - error correcting memory in packet buffers
▶ Wake-On-LAN
▶ Preboot eXecution Environment (PXE) flash interface
▶ Jumbo frame support

<table><tr><td>Speed LEDGreen/Orange</td><td>Active/LinkYellow</td></tr></table>

![8\n1](.dlap-8000-50-1z238-1000-10/52ab5387e5ac0870f4c83c63a44605bce4c6579a58c9bcb145d3724f306dd88e.jpg)

Figure 3-8: Ethernet Port and LEDs

<table><tr><td>Pin</td><td>10BASE-T/100BASE-TX</td><td>1000BASE-T</td></tr><tr><td>1</td><td>TX+</td><td>LAN_TX0+</td></tr><tr><td>2</td><td>TX-</td><td>LAN_TX0-</td></tr><tr><td>3</td><td>RX+</td><td>LAN_TX1+</td></tr><tr><td>4</td><td>—</td><td>LAN_TX2+</td></tr><tr><td>5</td><td>—</td><td>LAN_TX2-</td></tr><tr><td>6</td><td>RX-</td><td>LAN_TX1-</td></tr><tr><td>7</td><td>—</td><td>LAN_TX3+</td></tr><tr><td>8</td><td>—</td><td>LAN_TX3-</td></tr></table>

Table 3-8: Ethernet Port Pin Definition

<table><tr><td>LED Color</td><td>Status</td><td>Description</td></tr><tr><td rowspan="3">Yellow</td><td>OFF</td><td>Ethernet port is disconnected.</td></tr><tr><td>ON</td><td>Ethernet port is connected with no activity.</td></tr><tr><td>Flashing</td><td>Ethernet port is connected and active.</td></tr></table>

Table 3-9: Active/Link LED Indicators

<table><tr><td>LED Color</td><td>Status</td><td>Description</td></tr><tr><td rowspan="3">Green/Orange</td><td>OFF</td><td>10 Mbps</td></tr><tr><td>Green</td><td>100 Mbps</td></tr><tr><td>Orange</td><td>1000 Mbps</td></tr></table>

Table 3-10: Speed LED Indicators

# 3.1.14 DC Power Input

![V+\nV-\n24V DC IN](.dlap-8000-50-1z238-1000-10/43fc02df00dad68f996c762db24e02aa8b40d08a4ee5bb4ea6f140916e7d2700.jpg)

Figure 3-9: DC Power Input

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>V+ (DC_IN)</td></tr><tr><td>2</td><td>V- (DGND)</td></tr></table>

Table 3-11: DC Power Input Pin Definition

![Technical line drawing of a rectangular electronic component with two circular ports and a central connector (no text or symbols)](.dlap-8000-50-1z238-1000-10/9a8e7bd0f19f1c7d2e32b4f8abb60bccb9636cb68f938ff39f6faf1c5bc937b7.jpg)

V+ V+ V- V-
PEG 24V DC IN

Figure 3-10: Backplane DC Power Input

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>V+</td></tr><tr><td>2</td><td>V+</td></tr><tr><td>3</td><td>V-</td></tr><tr><td>4</td><td>V-</td></tr></table>

Table 3-12: Backplane DC Power Input Pin Definition

![This image displays a graphic icon of a document. The icon features a white sheet of paper with a folded top-right corner and horizontal grey lines running across it, simulating text lines. A large, bold red checkmark is drawn over the left side of the paper.](.dlap-8000-50-1z238-1000-10/82c1150aed788e7f2ca7e01c4117e8dc0081352563b509f2d16eb54c5cabdb4f.jpg)
NOTE:

The backplane connector supports a backplane power supply to provide PEG card power in a DC mode system. It can provide 24V and 20A for the backplane. It is recommended to use the same power supply as the motherboard.

Refer to Section 4.1: Attach DC Power Connector on page 31 to install the DC Power Connector to the DC Power Input.

Please use an approved power source as certified by IEC or UL. The maximum ambient operating temperature (Tma) is described in “Important Safety Instructions”. Altitude during operation is up to 2000 m where output meets LPS and SELV circuit requirements.

Power Source Rating

<table><tr><td></td><td>Voltage</td><td>Current</td></tr><tr><td>DC Power Source</td><td>24V DC</td><td>34A</td></tr><tr><td>AC Input</td><td>100V to 240V</td><td>10.5A to 3.5A</td></tr></table>

![The image displays a standard warning sign: a red triangle with a black border containing a white exclamation mark in the center.](.dlap-8000-50-1z238-1000-10/e8709c4e59ea7bd9ba18844fe33d36baad2f2b5514918a28ebc7524c4ffd7e71.jpg)
WARNING:

Before providing DC power, ensure the voltage and polarity provided are compatible with the DC input. Improper input voltage and/or polarity can be responsible for system damage.
AVERTISSEMENT: Avant de fournir une alimentation CC, assurez-vous que la tension et la polarité fournies sont compatibles avec l'entrée CC. Une tension d'entrée et / ou une polarité incorrectes peuvent être responsables de dommages au système.

# 3.1.15 COM Port Connectors

The DLAP-8000 provides four COM ports through D-sub 9-pin connectors. The COM1 & COM2 ports support RS-232/422/485 modes by BIOS setting, while COM3 and COM4 support only RS-232.

![1\n5\n6\n9](.dlap-8000-50-1z238-1000-10/2341843292a653f3e157a1a105552a7199058c6494c95ee47d8ab6e49c3edb84.jpg)

Figure 3-11: COM Port Pin Definition

<table><tr><td rowspan="2">Pin</td><td colspan="3">Signal Name</td></tr><tr><td>RS-232</td><td>RS-422</td><td>RS-485</td></tr><tr><td>1</td><td>DCD#</td><td>TXD422-</td><td>485DATA-</td></tr><tr><td>2</td><td>RXD</td><td>TXD422+</td><td>485DATA+</td></tr><tr><td>3</td><td>TXD</td><td>RXD422+</td><td>N/S</td></tr><tr><td>4</td><td>DTR#</td><td>RXD422-</td><td>N/S</td></tr><tr><td>5</td><td>GND</td><td>N/S</td><td>N/S</td></tr><tr><td>6</td><td>DSR#</td><td>N/S</td><td>N/S</td></tr><tr><td>7</td><td>RTS#</td><td>N/S</td><td>N/S</td></tr><tr><td>8</td><td>CTS#</td><td>N/S</td><td>N/S</td></tr><tr><td>9</td><td>RI#</td><td>N/S</td><td>N/S</td></tr></table>

Table 3-13: D-Sub 9-pin Signal Function of COM Ports

# 3.1.16 CFast Host Slot

The DLAP-8000 is equipped with a Type II Push-Push CFast host slot on the front panel, by SATA interface. Data transfer rates up to 3.0Gb/s (300MB/s) are supported. The host SATA controller provides a legacy operating mode using I/O space, and an AHCI operating mode using memory space. The CFast card can function as a storage device for system installation.

To install a CFast card, remove the 2 screws securing the cover to the chassis and remove the cover. Install the card and replace the cover using the 2 screws

![CFast](.dlap-8000-50-1z238-1000-10/cf3594d066a23e501f54093ada2b2aaf0f9c54325d8c638a65d389a5ccdf8866.jpg)

Figure 3-12: CFast Host Slot

# 3.2 Internal I/O Connectors

# 3.2.1 Mainboard Connector Locations

![A\nCity2\nB\nC\nD\nE\nF\nG\nI\nJ\nK\nW\nH\nM\nL\nN\nO\nP\nQ\nV\nR\nS\nT\nU](.dlap-8000-50-1z238-1000-10/20e559f358ad856f34eb38f43cf48559fcefaf0309ca18715236f134d8bb6dd3.jpg)

Figure 3-13: Mainboard Connectors

<table><tr><td>A</td><td>Smart Fan</td></tr><tr><td>B</td><td>SATA</td></tr><tr><td>C</td><td>USB 2.0 dongle</td></tr><tr><td>D</td><td>SATA</td></tr><tr><td>E</td><td>DDR4 SODIMM</td></tr><tr><td>F</td><td>PCIe x16 slot for PEG and SATA</td></tr><tr><td>G</td><td>M.2</td></tr><tr><td>H</td><td>Wafer for GPS external power</td></tr><tr><td>I</td><td>SIM for M.2</td></tr><tr><td>J</td><td>SIM for Mini PCIe</td></tr><tr><td>K</td><td>Mini PCIe</td></tr><tr><td>L</td><td>Wafer for I2C sensor</td></tr><tr><td>M</td><td>Wafer for Speaker</td></tr><tr><td>N</td><td>Wafer for COM x2, DI x8, DO x8 Mic in and Line out</td></tr><tr><td>O</td><td>Wafer for COM x4</td></tr><tr><td>P</td><td>Wafer for I2C sensor</td></tr><tr><td>Q</td><td>Internal Power button</td></tr><tr><td>R</td><td>PCIe x16 slot for PCIe and BP Power</td></tr><tr><td>S</td><td>RTC battery</td></tr><tr><td>T</td><td>Board-to-Board for AFM Board</td></tr><tr><td>U</td><td>CFast</td></tr><tr><td>V</td><td>PWR for AFM MXM carrier board (12V)</td></tr><tr><td>W</td><td>Clear CMOS Jumper</td></tr></table>

Table 3-14: Mainboard Connector Legend

# 3.2.2 5-slot Backplane Connector Locations

![G I F F F F\nH E\nD\nC\nB\nA\nJ K](.dlap-8000-50-1z238-1000-10/1e5abe94c68facb58a3cf47d7d95aa6bddb73b03b33c9d5937f66a1641ef68b2.jpg)

Figure 3-14: 5-slot Backplane Board Connectors

<table><tr><td>A</td><td>PCIe x16 (data bus x8)</td></tr><tr><td>B</td><td>PCIe x4 (data bus x1)</td></tr><tr><td>C</td><td>PCIe x8 (data bus x4)</td></tr><tr><td>D</td><td>PCIe x16 (data bus x8)</td></tr><tr><td>E</td><td>PCIe x8 (data bus x4)</td></tr><tr><td>F</td><td>SATA</td></tr><tr><td>G</td><td>FAN</td></tr><tr><td>H</td><td>USB 2.0</td></tr><tr><td>I</td><td>12V output</td></tr><tr><td>J</td><td>12V output</td></tr><tr><td>K</td><td>24V input</td></tr></table>

Table 3-15: 5-slot Backplane Board Connector Legend

# 3.2.3 GPS Module Power Headers

Power supply via cable for Mini PCIe GPS module cards (5V).

![Pure electrical component diagram without any text, numbers, or symbols](.dlap-8000-50-1z238-1000-10/a28f7a235ec43dd39e3d7615c1098d6830371eb7b9c7b27f802da1ac742b3d48.jpg)

Figure 3-15: GPS Module Power Header Pin Definition

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>+5V_GPS</td></tr><tr><td>2</td><td>GND</td></tr></table>

Table 3-16: GPS Module Power Header Pin Definition

# 3.2.4 USB 2.0 Connector

One USB 2.0 Type-A connector is provided on the mainboard for internal USB dongle, with another on the backplane board.

# 3.2.5 Mini PCIe Connector

The internal Mini PCIe connector (Rev. 1.2) supports full size Mini PCIe cards.

# 3.2.6 SATA Connector

The SATA connector supports transfer up to 6.0Gb/s (600MB/s).

# 3.2.7 12V Fan Connector

DC 12V fan module power supply is provided through the connector, to which the optional fan module connects when installed in the chassis.

![Simple diagram with four black squares arranged horizontally inside a rectangular box, labeled '1' at the bottom (no text or symbols within the diagram itself)](.dlap-8000-50-1z238-1000-10/29c1a5d7d02584ff6d3b5e60195c25fb261bc9db5937e4b807ec11c37900e1a3.jpg)

Figure 3-16: 12V Fan Connector Pin Definition

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>FAN_GND</td></tr><tr><td>2</td><td>P_+12V_FAN</td></tr><tr><td>3</td><td>SIO_FAN_IN</td></tr><tr><td>4</td><td>SIO_FAN_OUT</td></tr></table>

Table 3-17: 12V Fan Connector Pin Definition

# 3.2.8 Clear CMOS Jumper

Upon encountering an abnormal condition preventing the DLAP-8000 from booting, the jumper can clear the BIOS content stored in CMOS and restore default settings. To clear CMOS, short pin #1 to pin #2 for a minimum of 3 seconds, and then remove the jumper to return to normal mode (replace to pins #2 and #3, default).

![The image displays a horizontal row of three square boxes with a beveled, 3D-style border. Each box contains a single number centered within it. Reading from left to right, the boxes display the numbers '1', '2', and '3'. The boxes are set against a light grey background strip, bordered on the far left by a black vertical bar.](.dlap-8000-50-1z238-1000-10/81170100001b79bdb3fcb629609dd34f2cdd52a647d56116ba4215a8f3ba0842.jpg)
Figure 3-17: Clear CMOS Jumper Setting

# 3.2.9 Extended PWR/RESET Header

An internal header is provided for the Power and Reset buttons, with pin definition as shown.

![The image displays a black-and-white line drawing of a rectangular object, resembling a SIM card. In the upper left corner, the number '1' is visible. Below the number, there is a horizontal row of five small, solid black rectangles.](.dlap-8000-50-1z238-1000-10/cd0cd82e0957b16f8a4c20b8986dc8226c807bbfd380f21482b91361d7c5e7b4.jpg)
Figure 3-18: PWR/RESET Header Pin Definition

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>PWR_BTN-L</td></tr><tr><td>2</td><td>GND</td></tr><tr><td>3</td><td>GND</td></tr><tr><td>4</td><td>RESET_BTN-L</td></tr></table>

Table 3-18: PWR/RESET Header Pin Definition

# 3.2.10 USIM Slot

The USIM slot connects to the Mini PCIe and M.2 slots.

# 3.2.11 12V Power for Additional AFM MXM Carrier Board

One 12V power pin header provides additional AFM MXM carrier board power for an MXM card, if used.

![Pure electrical circuit lines without any symbols](.dlap-8000-50-1z238-1000-10/8063c9f71cb9adae700b8815ed6ad5a5741fb47b1ba27dd0021cdafa1d9ec919.jpg)

Figure 3-19: 12V Power Pin Definition

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>P_+12V_B</td><td>3</td><td>GND</td></tr><tr><td>2</td><td>P_+12V_B</td><td>4</td><td>GND</td></tr></table>

Table 3-19: 12V Power Pin Definition

![An icon of a white document with a folded top-right corner and faint horizontal lines, overlaid with a large red checkmark.](.dlap-8000-50-1z238-1000-10/a43a816196e0004c55c4865cfed8e6b76b1781c118188b494415d8d7fc575b16.jpg)
NOTE:

For additional information regarding the AFM MXM Carrier Board, please contact your ADLINK representative.

This page intentionally left blank.

# 4 Getting Started

# 4.1 Attach DC Power Connector

Locate the DC power connector shown below that is included in the Accessory Box. Insert it into the DC Power Input "A" shown in Figure 3-1 on page 11 and secure it to the chassis using the captive screws.

![Green electrical connector component with four circular pins (no text or symbols visible)](.dlap-8000-50-1z238-1000-10/55c492783375017e1be4a08290f8b4ada5ef3438ff2ca03b114bb193153b9b04.jpg)

Connect a DC power source as described in Section 3.1.14: DC Power Input on page 20 to the inputs of the DC power connector, making sure to use the correct input voltage and polarity.

![The image displays a standard safety warning sign. It features a red equilateral triangle with a white border containing a large white exclamation point in the center. Below the triangle, the text 'WARNING:' is printed in black, uppercase letters on a white background.](.dlap-8000-50-1z238-1000-10/322241006d85f89a07424851fd35d755d3d9eec871a1ed7f4dff99cd73bb8daf.jpg)

Before providing DC power, ensure the voltage and polarity provided are compatible with the DC input. Improper input voltage and/or polarity can be responsible for system damage.

AVERTISSEMENT: Avant de connecter à une source de courant continu, veuillez vous assurer de la polarité de la tension conformément à l'entrée CC du PC. Une tension et/ou une polarité incorrectes peuvent causer des dommages irréversibles sur le système.

# 4.2 Mounting the DLAP-8000

# 4.2.1 Install the Wall-mount Brackets

Use the 6 M4 6mm screws included in the Accessory Box to attach the 2 included wall-mount brackets to the chassis as indicated by the red circles below.

Utilisez les 6 vis M4 6 mm incluses dans la boîte d'accessoires pour fixer les 2 supports de montage mural inclus au châssis, comme indiqué par les cercles rouges ci-dessous.

wall-mount bracket
![Metallic electronic device casing with heat sinks and mounting holes, marked with red circles and arrows indicating features (no text or symbols present)](.dlap-8000-50-1z238-1000-10/a5093fec058257f5f2efc1319031fb2c1c68db8a4dc516a686cfd76e6e282090.jpg)

wall-mount bracket

# Mounting the Device / Montage de l'Appareil

Mount the device to a wall using the 4 keyhole openings indicated or the 6 mounting holes circled in red, according to the spacing dimensions of the holes in the bracket as shown in Figure 2-1 DLAP-8000 Front View (including wall-mount brackets).

Montez l'appareil sur un mur à l'aide des 4 ouvertures de trou de serrure en fonction des dimensions d'espacement des trous dans le support, comme indiqué dans Figure 2-1 DLAP-8000 Front View (including wall-mount brackets).

![keyhole opening\nkeyhole opening](.dlap-8000-50-1z238-1000-10/677a3e74524c29dad5ebff5f01b7f01508288dae5f4c34ddc654e27d36677195.jpg)

# 4.3 Driver Installation

Download the Windows 10 drivers for your system from the product page at https://www.adlinktech.com/Products/Industrial\_PCs\_Fanless\_Embedded\_PCs/IPCSystems/DLAP-8000\_Series and install.

The following drivers must be installed:

▶ Chipset
▶ Graphics
▶ Audio
▶ Ethernet
Intel ME
▶ DI/O

# Appendix A Power Consumption

![The image displays a white icon resembling a sheet of paper or a document with a curled top-left corner. Faint gray horizontal lines run across the lower portion of the page. A large, bold red checkmark is superimposed over the center of the document, extending diagonally from the bottom left to the upper right.](.dlap-8000-50-1z238-1000-10/2703c4e138985c37a5e4f64757faa5b0d73abb78656de72e09f43a0afb4c55b0.jpg)
NOTE:

Information in this Appendix is for power budget planning and design purposes only. Actual power consumption may differ based on final application.

# A.1 Power Consumption Reference

Power consumption as follows is based on lab data that includes of two different power modes.

▶ DC mode: 24V DC is applied and current is measured by the DC power supply.
▶ AC mode: 110V AC is applied and current is measured by the AC power supply.

The power consumption (W) is calculated as the product of applied voltage (V) and the current (A).

Platforms tested for this data have available external I/O interfaces and are attached to supported devices such as VGA and DVI monitors, CFast card, PS/2 keyboard/mouse, USB dummy load, COM loopback, audio loopback, with an internal hard disk driver installed, and without any PCIe card installed.

Information is presented for reference only. Actual power consumption will vary with different attached devices and operating system.

<table><tr><td>System</td><td>Power Off</td><td>System Idle</td><td>Processor Full Load</td><td>System Full Load</td></tr><tr><td>DLAP-8000 Intel® Xeon® 80W</td><td>4W</td><td>24W</td><td>130W</td><td>160W</td></tr><tr><td>DLAP-8000 Intel® CoreTM i7</td><td>3.6W</td><td>24W</td><td>65W</td><td>97W</td></tr><tr><td>DLAP-8000 Intel® CoreTM i5</td><td>3.7W</td><td>22W</td><td>64W</td><td>94W</td></tr><tr><td>DLAP-8000 Intel® CoreTM i3</td><td>3.8W</td><td>22W</td><td>56W</td><td>85W</td></tr></table>

Table A-1: Power Consumption

![A white document icon with a folded top-right corner and faint gray horizontal lines, overlaid with a large red checkmark.](.dlap-8000-50-1z238-1000-10/d97d18c60718a5b2e99c0680cce435d7408c2c8388678c35b13088726000d307.jpg)
NOTE:

▶ Sufficient power supply for the entire system is required to meet these specifications. At least 100W at 24V input is recommended.
▶ Heat generated by add-on PCI/PCIe adapters affects thermal stability. Additional heat dissipation is required when the system operates at high temperatures or in harsh environments with add-on adapters.

The following results use an AC mode system that includes two NVidia PEG RTX-8000 cards

<table><tr><td>System</td><td>Power Off</td><td>System Idle</td><td>Processor Full Load</td><td>System Full Load</td></tr><tr><td>DLAP-8000 Intel® Xeon® 80W</td><td>9W</td><td>69W</td><td>506W</td><td>780W</td></tr></table>

Table A-2: PEG Card Power Consumption

# Appendix B BIOS Setup

The Basic Input/Output System (BIOS) is a program that provides a basic level of communication between the processor and peripherals. In addition, the BIOS also contains codes for various advanced features applied to the DLAP-8000. The BIOS setup program includes menus for configuring settings and enabling features of the DLAP-8000. Most users do not need to use the BIOS setup program, as the DLAP-8000 ships with default settings that work well for most configurations.

Enter BIOS setup by selecting DEL when the system is powered on the POST (Power On Self Test) message is displayed. The DLAP-8000 controller supports one-time Boot Menu allowing selection of boot device. Enter the Boot Menu by selecting F7 at POST.

![The image displays a simple icon of a white document with a folded top-left corner. Faint horizontal lines are visible on the lower half of the page. A large, thick red checkmark is superimposed diagonally over the center.](.dlap-8000-50-1z238-1000-10/63148318f680a9b5411ab04624a85b82edcb7bbe61ce05ab703d8d540f0c243a.jpg)
NOTE:

▶ BIOS options listed are for reference only.
▶ Different configurations can affect BIOS behavior.
▶ Displayed material may reflect only the BIOS version corresponding to initial release and may differ from that of the purchased motherboard.
▶ Users are welcome to download the latest BIOS version from our official website.

# B.1 Main

<table><tr><td colspan="3">Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.Main Advanced Chipset Security Boot Save &amp; Exit</td></tr><tr><td>BIOS InformationBIOS VendorBIOS VersionBuild DateMRC VersionGOP VersionME FW VersionSystem InformationProject NameCPU Board VersionCPU Brand StringSteppingGT InfoCPU FrequencyTotal MemoryMemory FrequencyPCH SKUSteppingSystem DateSystem TimeAccess Level</td><td>American Megatrends1.06.1007/08/20200.7.1.959.0.108412.0.45.1509MVP-6100-MG2A2Intel(R) Core(TM) i7-B700T CPU @ 2.40GHzU0GT2 (0x3E92)2.40GHz4096 MB (DDR4)2133 MHzC246B0[Fri 06/04/2119][13:17:20]Administrator</td><td>Set the Date. Use Tab to switch between Date elements.Default Ranges:Year: 2005-2099Months: 1-12Days: dependent on month+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF8: Previous ValuesF9: Optimized DefaultsF10: Save &amp; ExitESC: Exit</td></tr></table>

Version 2.20.1271. Copyright (C) 2020 American Megatrends, Inc.

Contains basic system information for the DLAP-8000.

![The image displays a safety sign consisting of a red inverted triangle with a white exclamation point in the center. Below the triangle, the text 'WARNING:' is printed in black, uppercase letters on a white background.](.dlap-8000-50-1z238-1000-10/4f67b9859ca7133cb870e7d73dccd0c969e0b3bb52d22f2a02f33d016eb5b708.jpg)

Changing BIOS settings may lead to incorrect controller behavior and possible inability to boot. In such a case, Section 3.2.8: Clear CMOS Jumper provides instruction on clearing the CMOS and restoring default settings

# BIOS Information

Shows current system BIOS Vendor, BIOS Version, Build Date, MRC Version, GOP Version and ME FW Version.

# System Information

Shows current system Project Name, CPU Board Version, CPU Branding String, CPU Stepping, GT Info, CPU Frequency, Total Memory, Memory Frequency, PCH SKU and Stepping.

# System Time/System Date

Allows adjustment of system time and date, as follows.

1. Highlight System Time or System Date using the up and down &lt;Arrow&gt; keys.
2. Enter new values using the keyboard and select &lt;Enter&gt;.
3. Select &lt; Tab &gt; to move between fields.

![The image displays a white document icon with a folded top-left corner and faint horizontal grey lines running across the page. A large, bold red checkmark is superimposed diagonally over the center of the document, extending from the bottom left to the top right. There is no text present.](.dlap-8000-50-1z238-1000-10/ba0f64c21974438885ef4772ed8de929ff768c96c64a8194f9918a0ded9eba61.jpg)
NOTE:

The date must be entered in MM/DD/YY format, and the time in HH:MM:SS. The time is in 24-hour format. For example, 5:30 A.M. appears as 05:30:00, and 5:30 P.M. as 17:30:00.

# B.2 Advanced

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.</td></tr><tr><td colspan="2">Main Advanced Chipset Security Boot Save &amp; Exit</td></tr><tr><td rowspan="2">CPU ConfigurationPower ManagementSerial Console RedirectionUSB ConfigurationTPM 2.0 ConfigurationAMT ConfigurationOnboard Devices ConfigurationNCT6106D HW MonitorBIOS Watchdog TimerNVMe ConfigurationNetwork Stack Configuration</td><td>CPU Configuration</td></tr><tr><td>+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF8: Previous ValuesF9: Optimized DefaultsF10: Save &amp; ExitESC: Exit</td></tr></table>

![The image displays a vertical yellow triangular warning sign with a black border. Inside the triangle is a black exclamation point. Below the triangle, the text 'CAUTION:' is written in black capital letters on a white background.](.dlap-8000-50-1z238-1000-10/f5597826fe292cbdb0dc17a0caedf290408f1fae7f4e9c65fc37b2916ad8e723.jpg)

Setting incorrect or conflicting values in Advanced BIOS Setup may cause system malfunction.

Accesses advanced options of the DLAP-8000.

# B.2.1 CPU Configuration

![Optio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.\nAdvanced\nCPU Configuration\nType	Intel(R) Pentium(R)\nGold G5400T CPU @\n3.10GHz\nPackage	LGA1151\nStepping	U0\nNumber of Processors	2Core(s) / 4Thread(s)\nID	0x906EA\nMicrocode Revision	B4\nSpeed	3100 MHz\nL1 Data Cache	32 KB x 2\nL1 Instruction Cache	32 KB x 2\nL2 Cache	256 KB x 2\nL3 Cache	4 MB\nL4 Cache	N/A\nVMX	Supported\nSMX/TXT	Not Supported\nHyper-Threading	(Enabled)\nActive Processor Cores	(A11)\nIntel (VMX) Virtualization	(Enabled)\nTechnology\nIntel(R) SpeedStep(tm)	(Disabled)\nIntel(R) Speed Shift Technology	(Enabled)\nTcc Activation Offset	O\nEnabled for Windows XP and Linux (OS optimized for Hyper-Threading Technology) and Disabled for other OS (OS not optimized for Hyper-Threading Technology).\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.](.dlap-8000-50-1z238-1000-10/113ed1b6ba76732b0fc5d1d413a10d47e5ffd623a291a6656996ad80eefad341.jpg)

# Hyper-Threading

Enabled for Windows XP and Linux (optimized for Hyper-Threading Technology) and Disabled for other OS (not optimized for Hyper-Threading Technology). When Disabled only one thread per enabled core is enabled.

# Active Processor Cores

Number of cores to enable in each processor package.

# Intel (VMX) Virtualization Technology

When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology.

# Intel® SpeedStep™

Allows more than two frequency ranges to be supported.

# Intel® Speed Shift Technology)

Enables/disables Intel $^{®}$ Speed Shift Technology support. Enabling will expose the CPPC v2 interface to allow hardware controlled P-states.

# TCC Activation Offset

Offset from factory set TCC activation temperature at which the Thermal Control Circuit must be activated. TCC will be activated at: TCC Activation Temp - TCC Activation Offset. TCC Activation Offset range is 0 to 63.

# B.2.2 Power Management

![Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.\nAdvanced\nPower Management\nState After G3	(Last State)\nRTC Wake system from S5	(Disabled)\nRing Wake	(Disabled)\nPCIe Wake	(Enabled)\nI219 LAN Wake	(Enabled)\nSpecify what state to go to\nwhen power is re-applied after\na power failure (G3 state).\n++: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.](.dlap-8000-50-1z238-1000-10/0e7d87ec5517a3b68da415339b4dde9982e737798a4be01858d7b39a4c4aa126.jpg)

# State After G3

Specifies the state to go to when power is re-applied after a power failure (G3 state).

# RTC Wake system from S5

Enables/disables System Wake on Alarm event. FixedTime sets system to wake on the hr::min::sec specified, DynamicTime sets system to wake ay the current time + Increase minute(s).

# Ring Wake

Enables/disables RI ping for Wake On Ring function (PCH PME# signal).

# PCIe Wake

Enables/disables PCI Express wake capability.

# I219 LAN Wake

Enables/disables onboard LAN I219 wake capability.

# B.2.3 Serial Console Configuration

![Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.\nAdvanced\nSerial Console Redirection\nCOM1\nConsole Redirection (Disabled)\n► Console Redirection Settings\nCOM(Pci Bus0,Dev22,Func3)\nConsole Redirection (Disabled)\n► Console Redirection Settings\nConsole Redirection Enable or\nDisable.\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.](.dlap-8000-50-1z238-1000-10/8109ccc7ee3663950d73ba32cf87579ac2c3bae73a2d143485be74168227ae52.jpg)

# COM1

# Console Redirection

Enables/disables SIO COM1 Console Redirection.

# Console Redirection Settings

Specify how the host computer and the remote computer (in use) exchange data. Both computers should have the same or compatible settings.

# COM SOL (Pci Bus0, Dev22.Fun3)

# Console Redirection

Enables/disables PCI SOL Console Redirection.

# Console Redirection Settings

Specify how the host computer and the remote computer (in use) exchange data. Both computers should have the same or compatible settings.

# B.2.4 USB Configuration

![Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.\nAdvanced\nUSB Configuration\nUSB Module Version 21\nUSB Controllers:\n1 XHCI\nUSB Devices:\n1 Drive, 1 Keyboard, 1 Mouse\nUSB Mass Storage Driver Support (Enabled)\nUSB hardware delays and time-outs:\nUSB transfer time-out (20 sec)\nDevice reset time-out (20 sec)\nDevice power-up delay (Auto)\nMass Storage Devices:\nJetFlashTranscend 64GB 1100 (Auto)\nEnable/Disable USB Mass\nStorage Driver Support.\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.](.dlap-8000-50-1z238-1000-10/015d8e7d538837e25e46816887a549eab063ed8d1003f31341df376710b5b801.jpg)

# USB Mass Storage Driver Support

Enables/disables USB mass storage driver support.

# USB transfer time-out

The time-out value for Control, Bulk, and Interrupt transfers.

# Device reset time-out

USB mass storage device Start Unit command time-out.

# Device power-up delay

Maximum time the device will take before it properly reports itself to the Host Controller, where Auto uses default value for Root port 100ms, and for Hub port the delay is taken from Hub descriptor.

# B.2.5 TPM 2.0 Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc. Advanced</td></tr><tr><td>TPM 2.0 ConfigurationTPM20 Device FoundFirmware Version: 5.63Vendor: IFXSecurity Device Support [Enable]Active PCR banks SHA-1,SHA256Available PCR banks SHA-1,SHA256SHA-1 PCR Bank [Enabled]SHA256 PCR Bank [Enabled]Pending operation [None]Platform Hierarchy [Enabled]Storage Hierarchy [Enabled]Endorsement Hierarchy [Enabled]TPM2.0 UEFI Spec Version [TCG_2]Physical Presence Spec Version [1.3]Device Select [Auto]</td><td>Enables or Disables BIOS support for security device.O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available.+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF8: Previous ValuesF9: Optimized DefaultsF10: Save &amp; ExitESC: Exit</td></tr></table>

# Security Device Support

Enables/disables BIOS support for security device. OS will not show Security Device. TCG EFI protocol and INT1A interface will not be available.

# SHA-1 PCR Bank

Enables/disables SHA-1 PCR Bank.

# SHA256 PCR Bank

Enables/disables SHA256 PCR Bank.

# Pending Operation

Schedules Operation for the Security Device. Computer will reboot during restart in order to change State of Security Device.

# Platform Hierarchy

Enables/disables Platform Hierarchy.

# Storage Hierarchy

Enables/disables Storage Hierarchy.

# Endorsement Hierarchy

Enables/disables Endorsement Hierarchy.

# TPM 2.0 UEFI Spec Version

Selects TCG2 Spec Version Support.

# Physical Presence Spec Version

Directs OS to support PPI Spec Version 1.2 or 1.3. Some HCK tests may not support 1.3.

# Device Select

TPM 1.2 restricts support to TPM 1.2 devices, TPM 2.0 restricts support to TPM 2.0 devices, Auto supports both with default TPM 2.0 devices if not found, TPM 1.2 devices will be enumerated.

# B.2.6 AMT Configuration

![Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.\nAdvanced\nAMT Configuration\nAMT BIOS Features (Enabled)\nMEBx hotkey Pressed (Disabled)\nWhen disabled AMT BIOS\nFeatures are no longer\nsupported and user is no\nlonger able to access MEBx\nSetup.\nNote:\nThis option does not disable\nManageability Features in FW.\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.](.dlap-8000-50-1z238-1000-10/22edb360dbeef2788a2b28a86c7361e1c9311f6d240fe3b112a08eb408a4cb16.jpg)

# AMT BIOS Features

When disabled, AMT BIOS features are no longer supported and user is no longer able to access MEBx Setup.

# MEBx Hotkey Pressed

Enables/disables automatic MEBx hotkey press.

# B.2.7 Onboard Devices Configuration

<table><tr><td>Onboard Devices Configuration Serial Port Configuration COM1 Device Settings IO=3F8h; IRQ=4; COM1 Control [RS232] COM2 Device Settings IO=2F8h; IRQ=3; COM2 Control [RS232] COM3 Device Settings IO=3E8h; IRQ=5; COM4 Device Settings IO=2E8h; IRQ=7; Lan Port Configuration LAN #1 (Intel I219) [Enabled] LAN #2 (Intel I211AT) [Enabled] LAN #3 (Intel I211AT) [Enabled]</td><td>Select COM1 mode. RS232, RS422 or RS485</td></tr><tr><td></td><td>+: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F8: Previous Values F9: Optimized Defaults F10: Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.</td></tr></table>

# COM1 Control

Selects COM1 mode from RS232, RS422 or RS485.

# COM2 Control

Selects COM2 mode from RS232, RS422 or RS485.

# LAN #1 (Intel I219)

Enables/disables I219 LAN1.

# LAN #2 (Intel I211AT)

Enables/disables I211 LAN2.

# LAN #3 (Intel I211AT)

Enables/disables I211 LAN3.

# B.2.8 NCT6106D HW Monitor

![Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.\nAdvanced\nNCT6106D HW Monitor\nCPU Temperature : +42 °C\nBoard Temperature : +32 °C\nSystem Fan Speed : 952 RPM\nSystem Fan Control Mode (SMART FAN IV)\nT1 10\nT1 Duty 16\nT2 50\nT2 Duty 80\nT3 60\nT3 Duty 90\nT4 70\nT4 Duty 240\nCritical 80\nBP Fan Speed : N/A\nBP Fan Control Mode (SMART FAN IV)\nT1 10\nT1 Duty 16\nT2 50\nT2 Duty 80\nT3 60\nT3 Duty 90\nT4 70\nT4 Duty 240\nSystem Fan Control Mode Select\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.](.dlap-8000-50-1z238-1000-10/8f451426a1309328433b7fbf5bd0b3952a5abc6395bf1c6fc5c55e1f01fd96df.jpg)

Displays CPU/Board Temperatures, System/BP fan speeds, and various Voltages.

# System Fan Control Mode

Configures fan control mode from among Manual Mode, Auto Mode, and SMART FAN IV.

# Manual Mode

<table><tr><td>NCT6106D HW Monitor CPU Temperature : +42 % Board Temperature : +27 % System Fan Speed : 1118 RPM System Fan Control Mode [Manual Mode] Duty Cycle 100 +VCORE : +1.024 V +9V_S : +8.928 V +5V_S : +5.081 V +3.3V_S : +3.328 V +3.3V_SIO_AVSB : +3.344 V +3.3V_VBAT_SIO : +3.040 V</td><td>Configure Fan Control Mode. Select Maunal Mode, user can configure a fix FAN Duty. Select SMART FAN IV, user can configure 4 temperatures and 4 FAN Dutys, it offers 3 slopes to control the fan speed. Select Auto Mode, FAN will run at automatic speed with optimal thermal solution. ++: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F8: Previous Values F9: Optimized Defaults F10: Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.</td></tr></table>

Allows configuration of a set fan duty cycle.

# Auto Mode

Fan runs at automatic speed for optimal thermal solution.

<table><tr><td rowspan="22" colspan="2">NCT6106D HW MonitorCPU Temperature : +42 ‡Board Temperature : +27 ‡System Fan Speed : 1118 RPMSystem Fan Control Mode [Auto Mode]+VCORE : +1.024 V+9V_S : +8.928 V+5V_S : +5.081 V+3.3V_S : +3.353 V+3.3V_SIO_AVSB : +3.344 V+3.3V_VBAT_SIO : +3.040 V</td><td rowspan="21">Configure Fan Control Mode.Select Maunal Mode, user canconfigure a fix FAN Duty.Select SMART FAN IV, user canconfigure 4 temperatures and 4FAN Dutys, it offers 3 slopesto control the fan speed.Select Auto Mode, FAN will runat automatic speed withoptimal thermal solution.+: Select Screen↑1: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF8: Previous ValuesF9: Optimized DefaultsF10: Save &amp; ExitESC: Exit</td></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr><td></td></tr></table>

# SMART FAN IV

Four temperatures and four fan duty cycles, with three available fan speed presets, can be user-configured.

<table><tr><td colspan="2">NCT6106D HW Monitor</td><td rowspan="14">Configure Fan Control Mode. Select Maunal Mode, user can configure a fix FAN Duty. Select SMART FAN IV, user can configure 4 temperatures and 4 FAN Dutys, it offers 3 slopes to control the fan speed. Select Auto Mode, FAN will run at automatic speed with optimal thermal solution.</td></tr><tr><td>CPU Temperature</td><td>: +43 %</td></tr><tr><td>Board Temperature</td><td>: +28 %</td></tr><tr><td>System Fan Speed</td><td>: 1116 RPM</td></tr><tr><td>System Fan Control Mode</td><td>[SMART FAN IV]</td></tr><tr><td>T1</td><td>10</td></tr><tr><td>T1 Duty</td><td>16</td></tr><tr><td>T2</td><td>50</td></tr><tr><td>T2 Duty</td><td>80</td></tr><tr><td>T3</td><td>60</td></tr><tr><td>T3 Duty</td><td>90</td></tr><tr><td>T4</td><td>70</td></tr><tr><td>T4 Duty</td><td>240</td></tr><tr><td>Critical</td><td>80</td></tr><tr><td>+VCORE</td><td>: +1.024 V</td><td rowspan="6">+: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F8: Previous Values F9: Optimized Defaults F10: Save &amp; Exit ESC: Exit</td></tr><tr><td>+9V_S</td><td>: +8.928 V</td></tr><tr><td>+5V_S</td><td>: +5.081 V</td></tr><tr><td>+3.3V_S</td><td>: +3.328 V</td></tr><tr><td>+3.3V_SIO_AVSB</td><td>: +3.344 V</td></tr><tr><td>+3.3V_VBAT_SIO</td><td>: +3.056 V</td></tr></table>

Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.

# B.2.9 BIOS Watchdog Timer

![Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.\nAdvanced\nBIOS Watchdog Timer\nBIOS POST Watchdog (Disabled)\n1. Disable: Disable WatchDog\nTimer; 2. Second Mode: Enable\nWatchdog Timer in second mode;\n3. Minute Mode: Enable\nWatchdog Timer in minute mode.\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.](.dlap-8000-50-1z238-1000-10/19d09fb5561dceb1baf0e6eb8f81ebfdc4a64d4add667edb66a4e3c503720278.jpg)

# BIOS POST Watchdog

Disable disables WatchDog Timer, Second Mode enables Watchdog Timer in second mode, Minute Mode enables Watchdog Timer in minute mode.

# B.2.10 NVME Configuration

![Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.\nMain\nNVMe Configuration\nNo NVME Device Found\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.](.dlap-8000-50-1z238-1000-10/6fb8b74229afbf41d1549d4ecda3bd616ea25c41f71f05b7aa76828910f83aed.jpg)

Displays NVMe device status.

# B.2.11 Network Stack Configuration

![Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.\nAdvanced\nNetwork Stack (Disabled) Enable/Disable UEFI Network Stack\n++: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.](.dlap-8000-50-1z238-1000-10/0b94f2aef53a435ef680fe507ebcd31a2a2112f51e81eb93ec66251e55978f77.jpg)

# Network Stack

Enables/disables UEFI Network Stack.

# B.3 Chipset

![Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.\nMain Advanced Chipset Security Boot Save & Exit\n► System Agent (SA) Configuration\n► PCH-IO Configuration\n► BackPlane PCIe Configuration\nAbove 4G Decoding (Disabled)\nSystem Agent (SA) Parameters\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.](.dlap-8000-50-1z238-1000-10/ae43e589e5e1de5cc5b0036c2ce66c11ed631f43301625172444d2574d7c8c99.jpg)

![The image displays a standard safety warning sign. It features a red triangle with rounded corners containing a white exclamation point in the center. Directly below the triangle is a white rectangular field with the word 'WARNING' printed in black, capital letters. The sign is set against a plain black background.](.dlap-8000-50-1z238-1000-10/da64e185af7e9b98c016993d5777e0a9c64f0aa528fe4cc18fa07150f6e8083e.jpg)

Setting incorrect or conflicting values in Chipset BIOS Setup may cause system malfunction.

# Above 4G Decoding

Enables/disables 64bit-capable devices to be decoded in Above 4G Address Space (only when system supports 64-bit PCI Decoding).

# B.3.1 System Agent (SA) Configuration

![Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.\nChipset\nSystem Agent (SA) Configuration\nSA PCIe Code Version                    7.0.81.65\nVT-d                    Supported\n► Memory Configuration\n► Graphics Configuration\n► DMI/OPI Configuration\nVT-d                    (Enabled)\nMemory Configuration Parameters\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.](.dlap-8000-50-1z238-1000-10/66d11326f1c4863e525657aaae45001c64b3f62e98fec1e73aed3d7f88ca5eb3.jpg)

# System Agent (SA) Configuration

Displays and configures VT-d capability and provides settings for Memory, Graphics, and DMI/OPI configuration.

# B.3.1.1 Memory Configuration

![Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.\nChipset\n\nMemory Configuration\nMemory RC Version                    0.7.1.95\nMemory Frequency                        2133 MHz\nMemory Timings (tCL-tRCD-tRP-tRAS)                  15-15-15-36\n\nChannel 0 Slot 0              Populated & Enabled\nSize                      4096 MB (DDR4)\nNumber of Ranks                1\nManufacturer                 Innodisk\n\nChannel 1 Slot 0              Populated & Enabled\nSize                      4096 MB (DDR4)\nNumber of Ranks                1\nManufacturer                 Innodisk\n\n++: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\n\nVersion 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.](.dlap-8000-50-1z238-1000-10/b342240ee7acd21fb2c00b15957d429abb3f53394078ffb895a300a3fc813d3d.jpg)

# Memory Configuration

Displays memory speed, size, maker, and configuration.

# B.3.1.2 Graphics Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Chipset</td></tr><tr><td>Graphics Configuration
Primary Display [IGFX]
Internal Graphics [Enabled]
GTT Size [OMB]
Aperture Size [256MB]
DVMT Pre-Allocated [32M]
DVMT Total Gfx Mem [256M]</td><td>Select which of IGFX/PEG/PCI Graphics device should be Primary Display Or select SG for Switchable Gfx.</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.</td></tr></table>

# Primary Display

Selects IGFX/PEG/PCH PCI(e) Graphics device to be Primary Display, SG enables Switchable GFX.

# Internal Graphics

Keeps IGFX enabled based on Setup options.

# GTT Size

Selects GTT Size.

# Aperture Size

Selects Aperture Size.

# DVMT Pre-Allocated

Selects DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphics Device.

# DVMT Total Gfx Mem

Selects DVMT5.0 Total Graphic Memory size used by Internal Graphics Device.

# B.3.1.3 DMI/OPI Configuration

![Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.\nChipset\nDMI/OPI Configuration\nDMI X4 Gen3\nDMI Max Link Speed (Auto)\nSet DMI Speed Gen1/Gen2/Gen3\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.](.dlap-8000-50-1z238-1000-10/7cb2f1b4b49b4933f06cf3fe601083d324c9463b7231345e292fcc2a22e82636.jpg)

# DMI/OPI Configuration

Displays DMI link speed and width.

# DMI Max Link Speed

Sets DMI Speed from among Gen1/Gen2/Gen3.

# B.3.2 PCH-IO Configuration

![Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.\nChipset\nPCH-IO Configuration\n► SATA And RST Configuration\n► Security Configuration\n► HD Audio Configuration\n► M.2 Device Configuration\nSATA Device Options Settings\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.](.dlap-8000-50-1z238-1000-10/ed4b6af0cf7f046e3d6dfcf7e2b00a0a20b03beb48377ca7e9ab8d6e0492d591.jpg)

# PCH-IO Configuration

Configures SATA, Security, and HD Audio.

# B.3.2.1 SATA And RST Configuration

![Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.\nChipset\nSATA And RST Configuration\nSATA Mode Selection (AHCI)\nSATA Controller Speed (Gen3)\nM.2 Storage Empty\nM.2 Storage (Enabled)\nCFast Card Empty\nCFast Card (Enabled)\nHot Plug (Enabled)\nSATA HDD 1 Empty\nSATA HDD 1 (Enabled)\nSATA HDD 2 Empty\nSATA HDD 2 (Enabled)\nSATA HDD 3 Empty\nSATA HDD 3 (Enabled)\nSATA HDD 4 Empty\nSATA HDD 4 (Enabled)\nDetermines how SATA\ncontroller(s) operate.\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.](.dlap-8000-50-1z238-1000-10/0712f39a9eae3076072b53a1d7581de5a572ce59981b6b09c036d549e8c6cd9b.jpg)

# SATA Mode Selection

Determines how SATA controller(s) operate.

# SATA Controller Speed

Sets maximum speed the SATA controller can support.

# M.2 Storage

Enables/disables M.2 Storage

# CFast Card

Enables/disables CFast Card.

# Hot Plug

Designates the port as Hot Pluggable.

# SATA HDD 1

Enables/disables SATA HDD 1.

# SATA HDD 2

Enables/disables SATA HDD 2.

# SATA HDD 3

Enables/disables SATA HDD 3.

# SATA HDD 4

Enables/disables SATA HDD 4.

# B.3.2.2 Security Configuration

![Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.\nChipset\nSecurity Configuration\nBIOS Lock (Enabled)\nEnable/Disable the PCH BIOS\nLock Enable feature. Required\nto be enabled to ensure SMM\nprotection of flash.\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.](.dlap-8000-50-1z238-1000-10/5fb2b0e47ba6c5d91ee184b5f5ace9d9d79d20aa8b8909c18fcb8aa5fbdfbba2.jpg)

# BIOS Lock

Enables/disables PCH BIOS Lock Enable. Required to be enabled to ensure SMM flash protection.

# B.3.2.3 HD Audio Configuration

![Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.\nChipset\nHD Audio Configuration\nAudio Output Selection (Line out)\nAudio Output Selection\n+: Select Screen\n↑1: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.](.dlap-8000-50-1z238-1000-10/baa6ac895e62ba8c0a7dc498ac4b645c121fea4e09ed6cf8fdcc3971a6a3872a.jpg)

# Audio Output Selection

Selects Audio Output.

# B.3.2.4 M.2 Device Configuration

![Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.\nChipset\nM.2 Device Configuration\nM.2 Port Device Link Selection (X2)\nTo configure M.2 port's PCIe\nLink as X1 or X2\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.20.1271, Copyright (C) 2019 American Megatrends, Inc.](.dlap-8000-50-1z238-1000-10/0561df2860dfc73b6421bef38cabe71efa82925f0fbfb621c79199a399a970c1.jpg)

# M.2 Port Device Link Selection

Configures M.2 port PCIe Link as X1 or X2.

# B.3.3 Backplane PCIe Configuration

![Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.\nChipset\nBackPlane PCIe Configuration\nBackPlane	61G2-BP-MG2\nBP PEG #1	Not Present\nSpeed	(Auto)\nMax. detection time	100\nMin. time PERST active	20\nMax. time PERST deactive	200\nBP PCH PCIe x1	Not Present\nSpeed	(Auto)\nMax. detection time	100\nMin. time PERST active	20\nMax. time PERST deactive	200\nBP PCH PCIe x4 #1	Not Present\nSpeed	(Auto)\nMax. detection time	100\nMin. time PERST active	20\nMax. time PERST deactive	200\nBP PEG #2	Not Present\nSpeed	(Auto)\nMax. detection time	100\nMin. time PERST active	20\nMax. time PERST deactive	200\nBP PCH PCIe x4 #2	Not Present\nSpeed	(Auto)\nMax. detection time	100\nMin. time PERST active	20\nMax. time PERST deactive	200\nConfigure Maximum time PCIe device must enter L0 after PERST is deasserted.(Range: 100-65535 ms)\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.20.1271. Copyright (C) 2020 American Megatrends, Inc.](.dlap-8000-50-1z238-1000-10/e55f2d834142244cfdbabc5e6a796d10035c2794e87883cbcfd143efbd5e3509.jpg)

Displays backplane type, link speed, and width.

# B.3.4 BP PEG #1

# Speed

Controls PCIe max speed.

# Max. detection time

Configures max detection time for installed device (Range: 100-65535ms).

# Min. time PERST active

Configures min PERST# signal active time (Range: 20-65535ms).

# Max. time PERST deactive

Configures max time PCIe device must enter L0 after PERST is deasserted (Range: 100-65535ms).

# B.3.5 BP PCH PCIe x1

# Speed

Controls PCIe max speed.

# Max. detection time

Configures max detection time for installed device (Range: 100-65535ms).

# Min. time PERST active

Configures min PERST# signal active time (Range: 20-65535ms).

# Max. time PERST deactive

Configures max time PCIe device must enter L0 after PERST is deasserted (Range: 100-65535ms).

# B.3.6 BP PCH PCIe x4 #1

# Speed

Controls PCIe max speed.

# Max. detection time

Configures max detection time for installed device (Range: 100-65535ms).

# Min. time PERST active

Configures min PERST# signal active time (Range: 20-65535ms).

# Max. time PERST deactive

Configures max time PCIe device must enter L0 after PERST is deasserted (Range: 100-65535ms).

# B.3.7 BP PEG #2

# Speed

Controls PCIe max speed.

# Max. detection time

Configures max detection time for installed device (Range: 100-65535ms).

# Min. time PERST active

Configures min PERST# signal active time (Range: 20-65535ms).

# Max. time PERST deactive

Configures max time PCIe device must enter L0 after PERST is deasserted (Range: 100-65535ms).

# B.3.8 BP PCH PCIe x4 #2

# Speed

Controls PCIe max speed.

# Max. detection time

Configures max detection time for installed device (Range: 100-65535ms).

# Min. time PERST active

Configures min PERST# signal active time (Range: 20-65535ms).

# Max. time PERST deactive

Configures max time PCIe device must enter L0 after PERST is deasserted (Range: 100-65535ms).

# B.4 Security

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.Main Advanced Chipset Security Boot Save &amp; Exit</td></tr><tr><td>Password DescriptionIf ONLY the Administrator&#x27;s password is set,then this only limits access to Setup and isonly asked for when entering Setup.If ONLY the User&#x27;s password is set, then thisis a power on password and must be entered toboot or enter Setup. In Setup the User willhave Administrator rights.The password length must bein the following range:Minimum length 3Maximum length 20Administrator PasswordUser PasswordSecure Boot menu</td><td>Set Administrator Password++: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF8: Previous ValuesF9: Optimized DefaultsF10: Save &amp; ExitESC: Exit</td></tr></table>

If only the Administrator password is set, access is limited and the password requested on Setup. If User password is set, it acts as a power-on password and must be entered to boot or enter setup.

# Administrator Password

Sets Administrator Password.

# User Password

Sets User Password.

# Secure Boot Menu

Configures Secure Boot.

# B.4.1 Secure Boot Menu

![Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.\nSecurity\nSecure Boot\nSystem Mode User\nSecure Boot Not Active\nVendor Keys Valid\nSecure Boot Control (Disabled)\nSecure Boot Mode (Standard)\n▶ Key Management\nSecure Boot feature is Active\nif Secure Boot is Enabled,\nPlatform Key(PK) is enrolled\nand the System is in User mode.\nThe mode change requires\nplatform reset\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.](.dlap-8000-50-1z238-1000-10/5b10a000f19825c28b17f4ebed83acbcf50e054a9b5e757372cfff40b8d46921.jpg)

# Secure Boot Control

Active if Secure Boot is Enabled, Platform Key (PK) is enrolled and the System is in User mode. Mode change requires platform reset.

# Secure Boot Mode

Selects from Standard or Custom. In Custom, Secure Boot Policy variables can be configured by a physically present user without full authentication.

# Key Management

Enables expert users to modify Secure Boot Policy variables without full authentication.

# B.5 Boot

![Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.\nMain Advanced Chipset Security Boot Save & Exit\nBoot Configuration\nSetup Prompt Timeout 1\nBootup NumLock State (Off)\nQuiet Boot (Enabled)\nFast Boot (Disabled)\nBoot Configuration\nBoot Option #1 (Hard Disk)\nBoot Option #2 (CD/DVD)\nBoot Option #3 (USB Hard Disk)\nBoot Option #4 (USB CD/DVD)\nBoot Option #5 (USB Key:UEFI:\nJetFlashTranscend 16GB\n1100, Partition 1)\nBoot Option #6 (USB Floppy)\nBoot Option #7 (USB Lan)\nBoot Option #8 (Network)\n► UEFI USB Key Drive BBS Priorities\nSelect the keyboard NumLock state\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.](.dlap-8000-50-1z238-1000-10/a8451ab2a2a5bd4a75e632a5f80c51be569951eedee6f107aa25a0a5213f63a3.jpg)

# Setup Prompt Timeout

Number of seconds before setup activation key is launched, with 65535(0xFFFF) setting indefinite waiting.

# Bootup Num-Lock State

Sets keypad Number Lock status following boot.

# Quiet Boot

<table><tr><td>Option</td><td>Description</td></tr><tr><td>Disabled</td><td>Directs BIOS to display POST messages</td></tr><tr><td>Enabled</td><td>Directs BIOS to display the OEM logo.</td></tr></table>

# Fast Boot

<table><tr><td>Option</td><td>Description</td></tr><tr><td>Disabled</td><td>Directs BIOS to perform all POST tests.</td></tr><tr><td>Enabled</td><td>Directs BIOS to skip certain POST tests to boot faster.</td></tr></table>

While enabling Fast Boot can reduce system ready time, some prerequisites can reduce effectiveness.

# Boot Configuration

Specifies the priority of boot devices, all of which are detected during POST and displayed. Target Boot Option # and click to select the desired device.

# UEFI USB Hard Drive Disk Drives BBS Priorities

Specifies Boot Device Priority sequence from available UEFI USB Drives.

# B.6 Save & Exit

![Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.\nMain Advanced Chipset Security Boot Save & Exit\n\nSave Changes and Exit\nDiscard Changes and Exit\nSave Changes and Reset\nDiscard Changes and Reset\n\nSave Options\nSave Changes\nDiscard Changes\n\nRestore Defaults\nSave as User Defaults\nRestore User Defaults\n\nBoot Override\nUEFI: JetFlashTranscend 64GB 1100, Partition 1\nLaunch EFI Shell from filesystem device\n\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\n\nVersion 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.](.dlap-8000-50-1z238-1000-10/9cc16912e282a5a2629a428b25e027dfc3cbafc2442beb11a4a9d4b318a64581.jpg)

# Save Changes and Exit

Exits system setup after saving the changes.

# Discard Changes and Exit

Exits system setup without saving any changes.

# Save Changes and Reset

Resets the system setup after saving changes.

# Discard Changes and Reset

Resets system setup without saving any changes.

# Save Changes

Saves Changes so far to any of the setup options.

# Discard Changes

Discards Changes so far to any of the setup options.

# Restore Defaults

Sets all BIOS options to default settings, designed for maximum system stability but less than maximum performance. Select Restore Defaults if the computer encounters system configuration problems.

# Save as User Defaults

Saves all changes so far as User Defaults.

# Restore User Defaults

Restores user defaults to all setup options.

# Launch EFI Shell from filesystem device

Attempts to launch EFI Shell application (Shell.efi) from one of the available filesystem devices.

This page intentionally left blank.

# Appendix C Watchdog Timer (WDT) Function Library

This appendix describes use of the watchdog timer (WDT) function library for the DLAP-8000 controller. The watchdog timer is a hardware mechanism provided to reset the system if the operating system or an application stalls. After starting, the watchdog timer in the application must be periodically reset before the timer expires. Once the watchdog timer expires, a hardware-generated signal is sent to reset the system.

# C.1 WDT with API/Windows

The WDT API library files and a demo program (incl. source code) can be downloaded from: https://www.adlinktech.com/Products/Industrial\_PCs\_Fanless\_Embedded\_PCs/IPCSystems/DLAP-8000\_Series

To use the WDT function library for the DLAP-8000, include the header file WDT.h and linkage library WDT.lib in the C++ project.

# InitWDT

Initializes the watchdog timer function. Must be called before the invocation of any other WDT function.

# Syntax

C/C++

BOOL InitWDT()

# Parameters

None

# Return codes

TRUE if watchdog timer is successfully initialized.

FALSE if watchdog timer fails to initialize.

# SetWDT

Sets the timeout value of the watchdog timer. There are two parameters for this function to indicate the timeout ticks and unit. ResetWDT or StopWDT should be called before the expiration of watchdog timer, or the system will reset.

# Syntax

C/C++

BOOL SetWDT(BYTE tick, BYTE unit)

# Parameters

tick

Specify the number of ticks for watchdog timer. A valid value is 1 - 255.

unit

Specifies the timeout ticks of the watchdog timer.

<table><tr><td>Value</td><td>Description</td></tr><tr><td>0</td><td>The unit for one tick is one second. For example, when one tick is specified as 100 and the unit as 0, the timeout value is 100 seconds.</td></tr><tr><td>1</td><td>The unit for one tick is one minute. For example, whenone tick is specified as 100 and the unit as 1, the timeout value is 100 minutes.</td></tr></table>

# Return codes

TRUE if timeout value of watchdog timer is successfully set.

FALSE if timeout value of watchdog timer is failed to set.

# StartWDT

Start the watchdog timer function. Once the StartWDT is invoked, the watchdog timer starts. ResetWDT or StopWDT should be called before the expiration of watchdog timer, or the system will reset.

# Syntax

C/C++

BOOL StartWDT()

# Parameters

None

# Return codes

TRUE if watchdog timer is successfully started.

FALSE if watchdog timer is failed to start.

# ResetWDT

Reset the watchdog timer. The invocation of ResetWDT allows restoration of the watchdog timer to the initial timeout value specified in SetWDT function. ResetWDT or StopWDT should be called before the expiration of the watchdog timer, or the system will reset.

# Syntax

C/C++

BOOL ResetWDT()

# Parameters

None

# Return codes

TRUE if watchdog timer is successfully reset.

FALSE if watchdog timer fails to reset.

# StopWDT

Stops the watchdog timer.

# Syntax

C/C++

BOOL StopWDT()

# Parameters

None

# Return codes

TRUE if watchdog timer is successfully stopped.

FALSE if watchdog timer fails to stop.

# C.2 WDT with DOS/Linux

Under Linux, please program the WDT function using the LPC IO registers according to the sample program as follows.

```c
#include &lt;dos.h&gt;
#include &lt;stddef.h&gt;
#include &lt;stdio.h&gt;

/* Config LPC IO NCT6102D to enter config mode */
EnterConfig(void)
{
    outp(0x4E, 0x87);
    outp(0x4E, 0x87);
}

/* Config LPC IO to exit config mode */
ExitConfig(void)
{ outp(0x4E, 0xAA);
}

/* Read byte from LPC IO register */
unsigned char r_reg(unsigned char regoffset)
{ outp(0x4E, regoffset);
return inp(0x4F); }

/* Write byte to LPC IO register */
void w_reg(unsigned char regoffset, unsigned char data)
{ outp(0x4E, regoffset); outp(0x4F, data);
}

main(void)
{
    unsigned int count;
    /* print program title */

printf("----MXC-6400 WDT Demo----
----\n");
```

```c
printf("Init and config GPIO
ports<<<<<<<<<<<<<<<<<<<<<<\n");

printf("----
----\n");

EnterConfig();

/* config WDT registers */
w_reg(0x07,0x08);
/* enable keyboard interrupt to reset WDT timeout
value */
w_reg(0xF2,r_reg(0xF2)|0x40);
/* set unit as second */
w_reg(0xF0,r_reg(0xF0)&~0x04);
/* start the Watchdog */
w_reg(0x30,0x01);
/* set timeout value as 30 seconds */
/* WDT start automatically while timeout value is set
*/

w_reg(0xF1,0x1E);

printf("----
----\n");

printf("WDT is set and counting down
now.<<<<<<<<<<<<<<\n");

printf("----
----\n");

for(count=30;count!=0;count--)
{ printf("Countdown %2d : .\n",count);
/* reset WDT timeout value to 10 seconds */
/* w_reg(0x73,0x0A); */
sleep(1);
}
/* disable WDT */
/* WDT stop while timeout value is set to zero */
w_reg(0x30,0x00);
```

```txt
printf("WDT is disable. Program is terminating.");
ExitConfig();
return 0;
}
```

# Appendix D Digital Input/Output Function Library

DI/O provides input/output to support inter-device communications. Simple programming guides allow easy transmission of digital signals between the system and attached peripherals.

# DI/O with API/Windows

Matrix DI/O API library files and a demo program (incl. source code) can be downloaded from http://www.adlinktech.com.

To use the DI/O function library for DLAP-8000 series, include the header file awl.h and linkage library awl.lib in the C++ project. DI/O functions are as follows.

# AwIDioGetValue

Reads the digital logic state of a digital input line.

# Syntax

C/C++

int \_\_stdcall AwlDioGetValue(int Index)

# Parameter(s)

Index

Indexes the digital logic state of DLAP-8000 digital input channels 1 to 8 (bit 0 to 7)

# Return codes

```txt
0: Operation Success
-1: Operation Failed
```

# AwIDioSetValue

Sets the digital logic state of the digital output line.

# AwIDioGetValue

Reads the digital logic state of a digital input line.

# Syntax

C/C++

int \_\_stdcall AwlDioGetValue(int Index, int Value)

# Parameter(s)

Index

Indexes the digital logic state of DLAP-8000 digital input channels 1 to 8 (bit 0 to 7)

Value

Sets the digital logic state of DLAP-8000 digital output channels 1 to 8 (bit 0 to 7) to 0 or 1.

# Return codes

0: Operation Success

-1: Operation Failed

# Important Safety Instructions

For user safety, please read and follow all instructions, Warnings, Cautions, and Notes marked in this manual and on the associated device before handling/operating the device, to avoid injury or damage.

▶ Read these safety instructions carefully.
- Keep the User’s Manual for future reference.
▶ Read the Specifications section of this manual for detailed information on the recommended operating environment.
The device can be operated at an ambient temperature of $45^{\circ}$ C with DC input, and $35^{\circ}$ C with adapter input.
It is recommended that the device be installed in Information Technology Rooms that are in accordance with Article 645 of the National Electrical Code and NFPA 75.

▶ To avoid electrical shock and/or damage to device:

▷ Keep device away from water or liquid sources.
▷ Keep device away from high heat or humidity.
▷ Keep device properly ventilated (do not block or cover ventilation openings).
▶ Always use recommended voltage and power source settings.
▶ Always install and operate device near an easily accessible electrical outlet.
- Secure the power cord (do not place any object on/over the power cord).
▶ Only install/attach and operate device on stable surfaces and/or recommended mountings.
The power cord must be connected to a socket or outlet with a ground connection.

▶ If the device will not be used for long periods of time, turn off and unplug from its power source.
▶ Never attempt to repair the device, which should only be serviced by qualified technical personnel using suitable tools.

▶ A Lithium-type battery may be provided for uninterrupted backup or emergency power.

![A yellow triangular warning sign with a black border features a large black exclamation point in the center. Below the triangle is a white rectangular area containing the black text 'CAUTION :'.](.dlap-8000-50-1z238-1000-10/710db9bfe5da286a0646686751a0f9c8d8f445086ea35c75460c64f43c26d397.jpg)

Risk of explosion if battery is replaced with one of an incorrect type; please dispose of used batteries appropriately.

This equipment is not suitable for use in locations where children are likely to be present.
▶ The device must be serviced by authorized technicians when:

The power cord or plug is damaged
▷ Liquid has entered the device interior
The device has been exposed to high humidity and/or moisture
The device is not functioning or does not function according to the User's Manual
The device has been dropped and/or damaged and/or shows obvious signs of breakage

▶ Disconnect the power supply cord before loosening the thumbscrews and always fasten the thumbscrews with a screwdriver before starting the system up
It is recommended that the device be installed only in a server room or computer room where access is:

▷ Restricted to qualified service personnel or users familiar with restrictions applied to the location, reasons therefor, and any precautions required
▶ Only afforded by the use of a tool or lock and key, or other means of security, and controlled by the authority responsible for the location

![Warning sign depicting steam rising inside a yellow triangle, indicating hazardous or hazardous material.](.dlap-8000-50-1z238-1000-10/967658197159b319689a49f1fd5f0a784c7843cae05c1a011f9cabfacefdb610.jpg)

# BURN HAZARD

Hot surface! Do not touch! Touching this surface could result in bodily injury. To reduce risk, allow the surface to cool before touching.

# Consignes de Sécurité Importante

S'il vous plaît prêter attention stricte à tous les avertissements et mises en garde figurant sur l'appareil, pour éviter des blessures ou des dommages.

▶ Lisez attentivement ces consignes de sécurité.
▶ Conservez le manuel de l'utilisateur pour pouvoir le consulter ultérieurement.
▶ Lisez la section Spécifications de ce manuel pour des informations détaillées sur l'environnement d'exploitation recommandé.
L'appareil peut être utilisé à une température ambiante de 45°C avec entrée CC pour les série MVP-61; 35°C avec entrée adaptateur pour la série MVP-61.
Il est recommandé d'installer l'appareil dans des salles de technologie de l'information conformes à l'article 645 du National Electrical Code et à la NFPA 75.

Pour éviter les chocs électriques et/ou d'endommager l'appareil:

▷ Tenez l'appareil à l'écart de toute source d'eau ou de liquide.
▷ Tenez l'appareil à l'écart d'une forte chaleur ou d'une humidité élevée.
▶ Maintenez l'appareil correctement ventilé (n'obstruer ou ne couvrez pas les ouvertures de ventilation).
Utilisez toujours les réglages de tension et de source d'alimentation recommandés.
Installez et utilisez toujours l'appareil près d'une prise de courant facilement accessible.
▷ Fixez le cordon d'alimentation (ne placez aucun objet sur le cordon d'alimentation).
Installez/fixez et utilisez l'appareil uniquement sur des surfaces stables et/ou sur les fixations recommandées.
▷ Le cordon d'alimentation doit être connecté à une prise ou à une prise de courant avec mise à la terre.

Si l'appareil ne doit pas être utilisé pendant de longues périodes, éteignez-le et débranchez-le de sa source d'alimentation
N'essayez jamais de réparer l'appareil, qui ne doit être réparé que par un personnel technique qualifié à l'aide d'outils appropriés
Une batterie de type Lithium peut être fournie pour une alimentation de secours ininterrompue ou d'urgence.

![The image displays a standard warning sign featuring a yellow triangle with a thick black border. Inside the triangle is a large black exclamation point. Below the triangle, on a white background, is the text 'CAUTION:' in black capital letters.](.dlap-8000-50-1z238-1000-10/8ff5116540a2b53419f882041e36cbeea71b54ad376ae53d965adab9109139a0.jpg)

ATTENTION: Risque d'explosion si la pile est remplacée par une autre de type incorrect. Veuillez jeter les piles usagées de façon appropriée.

Cet équipement ne convient pas à une utilisation dans des lieux pouvant accueillir des enfants.
L'appareil doit être entretenu par des techniciens agrees lorsque:
▶ Le cordon d'alimentation ou la prise est endommagé(e)
▶ Un liquide a pénétré à l'intérieur de l'appareil.
L'appareil a été exposé à une forte humidité et/ou de la buée.
L'appareil ne fonctionne pas ou ne fonctionne pas selon le manuel de l'utilisateur.
L'appareil est tombé et/ou a été endommagé et/ou présente des signes évidents de dommage.
Débranchez le cordon d'alimentation avant de desserrer les vis à oreilles et serrez toujours les vis à oreilles avec un tournevis avant de mettre le système en marche.
Il est recommandé d'installer l'appareil uniquement dans une salle de serveurs ou une salle informatique où l'accès est:

Réservé au personnel de service qualifié ou aux utilisateurs familiarisés avec les restrictions appliquées à l'emplacement, aux raisons de ces restrictions et toutes les précautions requises
▷ Uniquement autorisé par l'utilisation d'un outil, d'une serrure et d'une clé, ou d'un autre moyen de sécurité, et contrôlé par l'autorité responsable de l'emplacement.

![Yellow triangular warning sign with black smoke symbol indicating hot weather](.dlap-8000-50-1z238-1000-10/bf7472f1fefeae20948809b0c52d0ffdf4159e4e6d4594a6edfa374e6b231ffd.jpg)

# RISQUE DE BRÛLURES

Partie chaude! Ne touchez pas cette surface, cela pourrait entraîner des blessures. Pour éviter tout danger, laissez la surface refroidir avant de la toucher.

This page intentionally left blank.

# Getting Service

Ask an Expert: http://askanexpert.adlinktech.com

# ADLINK Technology, Inc.

9F, No.166 Jian Yi Road, Zhonghe District

New Taipei City 235, Taiwan

Tel: +886-2-8226-5877

Fax: +886-2-8226-5717

Email: service@adlinktech.com

# Ampro ADLINK Technology, Inc.

5215 Hellyer Avenue, #110

San Jose, CA 95138, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

Fax: +1-408-360-0222

Email: info@adlinktech.com

# ADLINK Technology (China) Co., Ltd.

300 Fang Chun Rd., Zhangjiang Hi-Tech Park

Pudong New Area, Shanghai, 201203 China

Tel: +86-21-5132-8988

Fax: +86-21-5132-3588

Email: market@adlinktech.com

# ADLINK Technology GmbH

Hans-Thoma-Straße 11

D-68163 Mannheim, Germany

Tel: +49-621-43214-0

Fax: +49-621 43214-30

Email: emea@adlinktech.com

Please visit the Contact page at www.adlinktech.com for information on how to contact the ADLINK regional office nearest you:
[🔗 Link to the original document](.dlap-8000-50-1z238-1000-10/dlap-8000-50-1z238-1000-10.pdf)