Prowave Dry Pump Customer Version Operation Manual Manual Rev.: 1.0 Revision Date: April 13, 2023 Part Number: 50M-00131-1000 # Contents 1. Dry Pump Page Function Description. . 2 2. Device Deployment.. 4 3. Configuration.. 8 4. Displaying Device Information.... 10 # 1 Dry Pump Page Function Description ![The image displays a stylized blue line-art icon of an elephant facing to the right. The graphic is simple and rounded, featuring distinct lines for the trunk, ear, and legs against a plain white background. There is no text present in the image.](.drypump-software-um-50m-00131-1000-10/caa84d9e9e4f623e678735f379ee42c7076f0477ff33882486b5b6edd9ef9c64.jpg) PROWAVE ![A small, pixelated icon in purple and blue on a white background. It depicts a stylized human figure consisting of a rounded shape at the top (resembling a head), a horizontal line below it, and two vertical lines extending downwards from the horizontal line. The overall shape resembles a stick figure or a person with arms outstretched.](.drypump-software-um-50m-00131-1000-10/09333cfc4cea27d2231af123f24e35846e4c8d6133d7300e96564c87c73a9540.jpg) ![A low-resolution, pixelated grayscale image of a QR code. It features three large square finder patterns located at the top-left, top-right, and bottom-left corners. The remainder of the code consists of a grid of smaller square modules, visible primarily on the right side and bottom center.](.drypump-software-um-50m-00131-1000-10/265268c50499efcb80384e9bd09e45abfbd5813931927b0e3d18b19071ba360a.jpg) DAQ Device Management: List All Devices Under the Same Network Domain Device Identification Code: Used to Activate a Device # 1.1 Manage Pumps The Manage Pumps page lists important device information. ![A low-resolution, blue pixelated icon depicting a stylized elephant facing left against a white background.](.drypump-software-um-50m-00131-1000-10/31a1a482b1983b0291213a8acf3a7c6a7b0eb766da1f625a1a530359dba047b3.jpg) PROWAVE 瓶科技 ![The image displays a white background featuring a small, blurry dark shape on the left side and three horizontal gray bars stacked vertically on the right side, resembling a hamburger menu icon.](.drypump-software-um-50m-00131-1000-10/670b00c648ce2c549b7b29a5952a7e166af417597a11052bef22d82bfc35c0ff.jpg) C Refresh devices DeviceID↑↓ IP/MAC Address Tags ![The image shows a blue, rounded rectangular shape, resembling a button or logo, with the white text 'Adlink' centered inside it in a sans-serif font. The image is slightly blurry.](.drypump-software-um-50m-00131-1000-10/0c01e4e3819f60a71f62432600a3cdc243e3baca7a750c762a04f7495af1edf1.jpg) DrypumpConfig Prowave\_DryPump[BIN] 4 1 1 Device ID 2 Device MAC Address 3 Sets the name of the field device. E.g., ADLINK 4 Dry Pump Configuration Parameter Setting # 1.2 Device Activation Follow the directions on the Device activator page to activate your device. DRY PUMP Monitoring Version: 23.01.0202 ![The image displays a blue, stylized icon of an elephant facing left. It is a line drawing featuring a trunk, ear, eye (represented by a dot), and legs, set against a plain white background.](.drypump-software-um-50m-00131-1000-10/1ce92ceb739e25e7f4d4526e44eaea00578114082533f5222ab37159dbaf3604.jpg) PROWAVE譜威科技 ![The image displays four horizontal grey bars stacked vertically in the center of a white background. There is no text present.](.drypump-software-um-50m-00131-1000-10/f90222f3f917617cd9d178c6562ae889a7be0727667e53aec1d9b45f2f41d1a3.jpg) ![The image displays a small, pixelated icon representing a hierarchical structure or organizational chart. It consists of a single circle at the top connected by thin, light blue lines to three smaller circles arranged in a horizontal row directly beneath it. The circles have a pale green fill and a blue outline.](.drypump-software-um-50m-00131-1000-10/3954389647af96c0812769d8b0ab88982460242333282acf7375b809f553fce9.jpg) ![The image displays a 2x2 grid of light blue squares set against a white background. Three squares—located at the top-left, top-right, and bottom-left positions—are simple outlines. The bottom-right square is distinct, filled with a cross-hatch or grid pattern. The graphic resembles a digital icon often used for an application menu or app grid.](.drypump-software-um-50m-00131-1000-10/35313c35fa7b4ef1f6230940eee0b37eb297e837bd60de88c40385eca1685d6a.jpg) Device activator # Claim Device 1. Please start from scanning the QRcode from our shipping box. 2. The following QRCode willbe needed once you open the previous link. ![This image displays a black-and-white QR code. It is a square grid composed of black and white modules. Three large, square finder patterns are located in the top-left, top-right, and bottom-left corners. The remaining area consists of a dense, irregular pattern of data modules. There is no accompanying text or other graphics.](.drypump-software-um-50m-00131-1000-10/cb01f053df0fc42e36b9b826923cc4d9c7297f408300d00a74792af13d21b694.jpg) # 2 Device Deployment Use the Activation Sheet that comes with your SDAQ-204 when you want to deploy it. ![Exterior view of a black ADLINK MCM-204 electronic device with ports and connectors (no readable text or symbols beyond branding)](.drypump-software-um-50m-00131-1000-10/1207866f605955a9e3a2bfd0c9989b0a42ac900536c978a312b6729c6d6b1754.jpg) Activation Sheet. Follow these steps to activate your device.t 1.Use a smartphone to scan the following QR code to start the activation process. ![The image displays a QR code, which is a square matrix composed of black and white modules. Three large square patterns are positioned at the top-left, top-right, and bottom-left corners. The center and surrounding areas consist of a dense, irregular grid of black and white squares set against a white background.](.drypump-software-um-50m-00131-1000-10/92fc74027ff165754e4068f5b6f582243d27e92630c106167f4985c0f677ccc4.jpg) 2.Follow additional steps as indicated on your smartphone to complete the activation process.t Product Infot The following QR code contains information used in the activation process.t ![The image displays a standard QR code, characterized by a square grid of black and white modules. Three large finder patterns, resembling squares within squares, are positioned at the top-left, top-right, and bottom-left corners. The remainder of the image consists of a dense, complex arrangement of black and white squares that encode data.](.drypump-software-um-50m-00131-1000-10/f612da557ed434dfacc2ac1943145127de8b59d52fc685a70e34da3feb4f48af.jpg) Step 1: The SDAQ-204 must be connected to an external network. Using a smartphone, scan the QR Code on the Activation Sheet and follow the instructions. Activation Sheet Follow these steps to activate your device.t 1.Use a smartphone to scan the following QR code to start the activation process.t ![QR code image with red border, containing machine-readable data for scanning](.drypump-software-um-50m-00131-1000-10/ab2e7cfff2f940a6d6ab336a1394063dfb1059ec501eb022e0ebf88579540ef9.jpg) ![.155.236.82:8080\nStep1\nStep2\nStep3\nStep4\nActivate Your Device\nFirst, please\n1. launch the utility on your PC (Laptop)\n2. open 'device activator' page from the menu on\nthe left\nNext )](.drypump-software-um-50m-00131-1000-10/791ab3f4d7c8121c3f2bf4a739fc7787b62b5ae5ce13534651ff6695a1ae773b.jpg) Step 2: Open ADLINK ACE.exe, then click the Device Activator menu, and scan the QR code. ![2:44\n.155.236.82:8080\nStep1\nStep2\nStep3\nStep4\nScan the QR code from utility\nRescan\nPROWAVE\nBANKS\nDevice Manager\nApp Creator\nACE Handbook\nManage Pumps\nDevice optimizer\nClaim Device\nPlease start from scanning the QR code from our shipping list.\nThe following QR code will be tested once you open the previous link.](.drypump-software-um-50m-00131-1000-10/571872dfb3c96dc506c20e385c8f36fc55f8e3490eac800c13b29e091ef9aebe.jpg) ![2:44\n.155.236.82:8080\nStep1\nStep2\nStep3\nStep4\nScan the QR code from utility\nRescan\n✓ Valid value, you can head to the next step\n( Back\nNext )](.drypump-software-um-50m-00131-1000-10/f566e55c024b4f21c02482d72f69b24fa6f76826338ecf86ecbcfb389a4eefda.jpg) Step 3: Scan the Product Info QR Code on the Activation Sheet. ![2:44\n.155.236.82:8080\nStep1\nStep2\nStep3\nStep4\nScan your Product Info from the\nActivation Sheet\nProduct Info\n** The following QR code contains information used in the activation process.](.drypump-software-um-50m-00131-1000-10/8654baf7cd91be68f085c87c8a699f4c91e74ccebd91268c30fcfb04250836ca.jpg) ![.155.236.82:8080\nStep1\nStep2\nStep3\nStep4\nScan your Product Info from the\nActivation Sheet\nRescan\n✓ Valid product info, you can head to the next\nstep\n( Back\nScan another\nNext )](.drypump-software-um-50m-00131-1000-10/5263c0f1b1e837c9cb5f12dedbcb49f4cc670272a4ad9b248eeff210db52c9e7.jpg) Step 4: Check whether the product information is consistent with the actual hardware configuration, and click Submit after confirming that it is correct. ![PROWAVE\n触感科技\nManage Pumps\nDevice activator\nManage Pumps\nRefresh devices\nDevice ID ↑↓\nIP/MAC Address\nK5A8EC1014\n192.168.1.54\n00:30:64:32:61:75\n2:46\n.155.236.82:8080\n+\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n.\n\nMAC Address\n00:30:64:32:61:75\nDevice ID\nK5A8EC1014\nDevice Model\nsDAQ-204\nActivation Key\n7bcbac771c4651a6bfea777e8630dd07\n(\nBack\nSubmit](.drypump-software-um-50m-00131-1000-10/5910cde71e7fe55ded5ed019f7e82735d15ecca3664f6868344a7780bad3a271.jpg) Step 5: When the activation is successful, the ACE software will display Activating Device messages. ![PROWAVE\n晶盛科技\nManage Pumps\nDevice activator\nClaim Device\n1. Please start from scanning the QRcode from our shipping box.\n2. The following QRCode will be needed once you open the previous link.\ni Activating Device\nDownloading iApp.\ni Activating Device\niApp Downloaded.\ni Activating Device\niApp Extracted.\ni Activating Device\niApp Deploying.](.drypump-software-um-50m-00131-1000-10/2e05df2bb8219707813842adb7943a17d95f29bb23ceaa622ee9afe7f5b904be.jpg) Step 6: After completion, switch back to the Manage Pump page, to configure the device software and deployment. ![PROWAVE\n智能科技\nManage Pumps\nDevice activator\nManage Pumps\nRefresh devices\nKeyword Search\nDevice ID ↑↓ IP/MAC Address Tags Drypump Config\nK5A8EC1014 192.168.1.54\n 00:30:64:32:61:75 Adlink Prowave_DryPump(BIN)\n(( ( 1 ) ))](.drypump-software-um-50m-00131-1000-10/ee7a9a8b238016b1813eedbaf52193ca534614b8e2f03492b815314af835759b.jpg) Step 7: Set the parameters according to the actual equipment, then save to complete configuration. ![PROWAVE\n智能科技\nManage Pumps\nDevice activator\nManage Pumps\nRefresh devices\nKeyword Search\nDevice ID ↑↓\nIP/MAC Address\nTags\nDrypump Config\nK5A8EC1014\n192.168.1.54\n00:30:64:32:61:75\nAdlink\nProwave_DryPump(BIN)\nCustom config\nConnect to:\nOne Machine\nTwo Machines\nCancel\nNext](.drypump-software-um-50m-00131-1000-10/ecb9ca09c2d207d6af452f345b4c3a4f25f31512bcacbd13b7a72befbca73e62.jpg) # 3 Configuration This section describes device configuration. Step 1: Select Manage Pump from the sidebar menu, and then click the Drypump Config field. ![PROWAVE\nManage Pump\nDevice activator\nManage Pumps\nRefresh devices\nKeyword Search\nDevice ID ↑↓\nIP/MAC Address\nTags\nDrypump Config\nK5A8EC1014 192.168.1.54\n00:30:64:32:61:75\nADUNK\nDryPump_CN_V1.0.2(BIN)\n(( ( 1 ) ))](.drypump-software-um-50m-00131-1000-10/8575b31fcf97e31d59a76350d48f0676a81ed2f6de34129c39c8d6e37db542d3.jpg) Step 2: You can set the parameter values according to the device type. ![Custom config\nConnect to: One Machine Two Machines\nCancel ) Next](.drypump-software-um-50m-00131-1000-10/4d1809bb826d546a43e96ac0539d6dc33250456b2d1ba47af29147834b900491.jpg) One Machine: ![Custom config\nMotor Free End (mv/g)\n100\nPump Drived End (mv/g)\n100\nType\nClaw\nMotor Speed (RPM)\n1,800\nPump Speed (RPM)\n1,800\nMotor Driving End (mv/g)\n100\nPump Free End (mv/g)\n100\nScarplate\nStiff\nNumber of blades\n4\nMains Electricity Frequency\n(Hz)\n120\nCancel\nApply\n1\n2\n3\n4\n5\n6](.drypump-software-um-50m-00131-1000-10/d410ae6784d68eadecfc241173c268de4031a64ad13d617ca6735d88826ae2d2.jpg) Two Machines: ![Custom config\nMachine 1\nPump Drive End\nMotor Free End\n1\nMachine 2\nMotor Driving End (mV/g)\n100\nType\n100\nRasenlate\nClaw\nStiff\nMotor Speed (RPM)\nNumber of blades\n1,800\n4\nPump Speed (RPM)\nMains Electricity Frequency (Hz)\n1,800\n120\nMotor Drived End (mV/g)\n100\nType\n100\nRasenlate\nClaw\nStiff\nMotor Speed (RPM)\nNumber of blades\n1,800\n6\nPump Speed (RPM)\nMains Electricity Frequency (Hz)\n1,800\n110\n× Cancel\n✓ Apply\n2\n3\n4\n5\n6\n7](.drypump-software-um-50m-00131-1000-10/cbf779963b0caa7c3e675358d2e09586a64e4842b96b9e7afb56748b20db20df.jpg) 1. Sensor Sensitivity 2. Motor Type (Claw/Screw) 3. Pump Base (Fixed Base Plate/Rigid Base Plate) 4. Motor Speed 5. Number of Pump Blades 6. Pump Speed 7. Motor Power Supply Frequency # 4 Displaying Device Information There are multiple ways to display a device’s information. # 4.1 Live View Step 1: Select Manage Pump from the sidebar menu, then click Device ID to view the device’s Live View that displays real-time informationin. This view refreshes every three seconds and displays the health index information of each measuring point. ![PROWAVE\n龍威科技\nManage Pumps\nDevice activator\nManage Pumps\nRefresh devices\nKeyword Search\nDevice ID ↑↓\nIP/MAC Address\nTags\nDrypump Config\nK5A8EC1014\n192.168.1.54\n00:30:64:32:61:75\nADLINK\nDryPump_CN_V1.0.2(BIN)\n(( ( 1 ) ))](.drypump-software-um-50m-00131-1000-10/78c99a12458673c1cbed857961fa56c40aa2fd5c9f4c05efdf85a371e45ae38e.jpg) Step 2: When the warning value (yellow) or dangerous value (red) is exceeded, the health indicator will change color. ![| Status | Value |\n| :--- | :--- |\n| status(Motor Free End) | 0.0736 |\n| mm/s rms | 0.0736 |\n| DeviceHealth | 0.0736 |\n| BearingEarly | 0.0002 |\n| BearingLoose | 0.0210 |\n| BearingDamage | 0.0154 |\n| Balanced | 0.0197 |\n| MotorEccentric | 0.002286 |\n| MotorSpeed | 1800 |\n| MotorFreq | 120 |\n| Type:Claw | |\n| Sensitivity | 100 |\n| status(Pump Driving End) | 0.0727 |\n| DeviceHealth | 0.0727 |\n| BearingEarly | 0.0002 |\n| BearingLoose | 0.0344 |\n| BearingDamage | 0.0000 |\n| PumpEccentric | 0.000503 |\n| PumpSpeed | 1800 |\n| PumpBlades | 8 |\n| Baseplate:Stiff | |\n| Sensitivity | 100 |](.drypump-software-um-50m-00131-1000-10/d9f0f8060e19de1648b7fe2491d8941e4bb66ad903a159d47d100735493e7f4c.jpg) # 4.2 Device History Information Select Manage Pump from the sidebar menu, and then click the symbol to enter the historical information display screen. ![PROWAVE\n融威科技\nManage Pumps\nDevice activator\nManage Pumps\nRefresh devices\nKeyword Search\nDevice ID ↑↓\nIP/MAC Address\nTags\nDrypump Config\nK5A8EC1014\n19:168.1.54\n00:30:64:32:61:75\nADLINK\nDryPump_CN_V1.0.2(BIN)\n(( ( 1 ) ))](.drypump-software-um-50m-00131-1000-10/a293c3db1feb25cf12d3cbc6f8c03676f5fe82a2b63b1235a9c8466cc3aeaf67.jpg) Data is displayed in increments of 1 hour. ![| Date | Feature - Motor Driving End | Feature - Motor Free End |\n| ---------- | -------------------------- | ------------------------ |\n| 2023-01-08 09:30:01 | 0.05 | 0.04 |\n| 2023-01-08 10:30:33 | 0.02 | 0.02 |\n| 2023-01-08 11:30:46 | 0.01 | 0.01 |\n| 2023-01-08 12:30:59 | 0.02 | 0.02 |\n| 2023-01-08 13:31:52 | 0.03 | 0.03 |\n| 2023-01-08 14:31:47 | 0.04 | 0.04 |\n| 2023-01-08 15:31:49 | 0.05 | 0.05 |\n| 2023-01-08 16:31:46 | 0.06 | 0.06 |\n| 2023-01-08 17:31:49 | 0.07 | 0.07 |\n| 2023-01-08 18:31:48 | 0.08 | 0.08 |\n| 2023-01-08 19:31:46 | 0.12 | 0.12 |\n| 2023-01-08 20:31:49 | 0.06 | 0.06 |\n| 2023-01-08 21:31:46 | 0.05 | 0.05 |\n| 2023-01-08 22:31:48 | 0.04 | 0.04 |\n| 2023-01-08 23:31:47 | 0.03 | 0.03 |\n| 2023-01-08 24:31:46 | 0.02 | 0.02 |\n| 2023-01-08 25:31:48 | 0.01 | 0.01 |\n| 2023-01-08 26:31:47 | 0.02 | 0.02 |\n| 2023-01-08 27:31:46 | 0.03 | 0.03 |\n| 2023-01-08 28:31:45 | 0.04 | 0.04 |\n| 2023-01-08 29:31:46 | 0.05 | 0.05 |\n| 2023-01-08 30:31:45 | 0.06 | 0.06 |\n| 2023-01-08 31:31:47 | 0.07 | 0.07 |\n| 2023-01-08 32:31:46 | 0.08 | 0.08 |\n| 2023-01-08 33:31:45 | 0.09 | 0.09 |\n| 2023-01-08 34:31:47 | 0.1 | 0.1 |\n| 2023-01-08 35:31:46 | 0.1 | 0.1 |\n| 2023-01-08 36:31:45 | 0.1 | 0.1 |\n| 2023-01-08 37:31:47 | 0.1 | 0.1 |\n| 2023-01-08 38:31:46 | 0.1 | 0.1 |\n| 2023-01-08 39:31:45 | 0.1 | 0.1 |\n| 2023-01-08 40:31:47 | 0.1 | 0.1 |\n| 2023-01-08 41:31:46 | 0.1 | 0.1 |\n| 2023-01-08 42:31:45 | 0.1 | 0.1 |\n| 2023-01-08 43:31:47 | 0.1 | 0.1 |\n| 2023-01-08 44:31:46 | 0.1 | 0.1 |\n| 2023-01-08 45:31:45 | 0.1 | 0.1 |\n| 2023-01-08 46:31:47 | 0.1 | 0.1 |\n| 2023-01-08 47:31:46 | 0.1 | 0.1 |\n| 2023-01-08 48:31:45 | 0.1 | 0.1 |\n| 2023-01-08 49:31:47 | 0.1 | 0.1 |\n| 2023-01-08 5 Oct:31:46 | (no label) | (no label) |\n| (Note: The actual values are not provided in the code and data source) | (no label) | (no label) |](.drypump-software-um-50m-00131-1000-10/b8899683b55d69547e09973669ffe002df0b7f8fb67662e3fd5c0cd71ad324d9.jpg) There are two charts, Feature (feature index) and Health (health index). There are different indicators depending on the device type.
PumpMotor
DeviceHealthDeviceHealth
BearingEarlyBearingEarly
BearingLooseBearingLoose
BearingDamageBearingDamage
pumpEccentricBalanced
MotorEccentric
Health (health indicator) information displayed is according to the ISO10816 standard agreement, Alarm & Danger Line. The value is fixed at Alarm=2.8/Danger=4.5. Up to 21,700 records can be written on the screen, with older data deleted if the number is exceeded. [🔗 Link to the original document](.drypump-software-um-50m-00131-1000-10/drypump-software-um-50m-00131-1000-10.pdf)