# HPERC-IBR-MC/MH

High Performance Extreme Rugged Computer System

User’s Manual

![Technical line drawings of two ADLINK TECHNOLOGY INC. modules with heat sinks and ventilation gauges (no text or symbols on the modules themselves)](.hperc-ibr-m-50-1z178-1000-100-pm-en/0379dc1279b457860a060dab5c305e8ba6531b5f901ac63dd991a8ad4f7ace01.jpg)

Manual Rev.: 1.00

Revision Date: December 20, 2016

Part No: 50-1Z178-1000

# Advance Technologies. Automate the World.

# Revision History

<table><tr><td>Revision</td><td>Reason for Change</td><td>Date</td></tr><tr><td>1.00</td><td>Initial release</td><td>20-12-2016</td></tr></table>

# Preface

© Copyright 2016 ADLINK Technology, Inc.

www.adlinktech.com

# Disclaimer

Information in this document is provided in connection with ADLINK products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in ADLINK´s Terms and Conditions of Sale for such products, ADLINK assumes no liability whatsoever, and ADLINK disclaims any express or implied warranty, relating to sale and/or use of ADLINK products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. If you intend to use ADLINK products in or as medical devices, you are solely responsible for all required regulatory compliance, including, without limitation, Title 21 of the CFR (US), Directive 2007/47/EC (EU), and ISO 13485 & 14971, if any.ADLINK products are not intended for use in medical, life saving, or life sustaining applications. ADLINK may make changes to specifications and product descriptions at any time, without notice.

# Trademarks

PCI/104-Express is a registered trademark of the PC/104 Consortium. All other marks are the properties of their respective companies.

# Audience

This manual provides reference only for computer design engineers, including but not limited to hardware and software designers and applications engineers. ADLINK Technology, Inc. assumes you are qualified to design and implement prototype computer equipment.

This page intentionally left blank.

# Table of Contents

Revision History.....

Preface ...

List of Figures ..... vii

List of Tables ... ix

1 HPERC-IBR-M Setup ........

1.1 About the HPERC-IBR-M..
1.2 Using this Guide..
1.3 Requirements...
1.4 Device/Peripheral Connections..
1.5 Specifications... . 2
1.6 Block Diagram... 4
1.7 Power Specifications (without GPGPU).. 5
1.8 Power Specifications (with GPGPU). 6
1.9 Environmental Specifications... 6
1.10 What’s in the Box ... 7
1.11 Setup Steps ... 8
1.12 Setting Up the Work Space . 8
1.13 Installing Mounting Screws .. 9
1.14 Connecting Peripherals.. 12
1.15 P1 Military DC Power In Connector ......... . 13
1.16 P2 and P3 Military Connector .. 14

1.16.1P2 Pin Definitions . . 15

1.16.2P3 Pin Definitions . 18

1.17 Applying Power to the HPERC-IBR-M. . 22

2 Internal Components.. . 23

3 BIOS Setup....... . 25

3.1 Menu Structure . . 25
3.2 Main Menu .. . 26

3.2.1 BIOS Information . . 26
3.2.2 Processor Information.. . 26
3.2.3 PCH Information ... . 26
3.2.4 System Language.. . 26
3.2.5 System Date and Time . .27

3.3 Advanced Menu... . 27

3.3.1 ACPI and Power Management . . 27

3.3.2 Trusted Computing .... .27

3.3.3 CPU . . 28

3.3.4 SATA .. .29

3.3.5 Intel Rapid Start Technology.. . 29
3.3.6 Intel TXT(LT) Technology . . 30
3.3.7 PCH-FW Configuration ...... .. 30
3.3.8 Intel Anti-Theft Technology Configuration...... .. 30
3.3.9 USB.. . 31
3.3.10F81216 Second Super IO . .. 31
3.3.11Super IO. . 32
3.3.12H/W Monitor .. . 32
3.3.13Serial Port Console . . 33
3.3.14AMI Graphic Output Protocol Policy.. . 35
3.3.15MXM/3.0 Hybrid Graphics . . 35
3.3.16Intel RC Drivers Version Detail . .. 35
3.3.17CPU PPM Configuration . . 36

3.4 Chipset . 36

3.4.1 PCH-IO Configuration . . 36
3.4.2 System Agent Configuration . . 37

3.5 Boot .. 39

3.5.1 Boot Configuration . . 39

3.6 Security . 40

3.6.1 Password Description . . 40
3.6.2 Save & Exit.. . 40

Safety Instructions.... 4 1

Getting Service....... ...... 43

# List of Figures

Figure 1-1: HPERC-IBR-M Block Diagram. ..4
Figure 1-2: i7-3517UE Peak In-Rush Current and Duration (without GPGPU) . ..5
Figure 1-3: HPERC-IBR-M Unit with Accessories ........
Figure 1-4: Top and Front Views of “MH” Enclosure with Mounting Dimensions ..... ..9
Figure 1-5: Top and Front Views of “MC” Enclosure with Mounting Dimensions ...... .... 10
Figure 1-6: Bottom View of “MC” Enclosure with Mounting Holes.. ..11
Figure 1-7: Front View of HPERC-IBR-M I/O Panel .. . 12
Figure 1-8: P1 Military DC Power In Connector Pin Locations. .. 13
Figure 1-9: P2 and P3 Military Interface Connector Pin Locations.. ..14

This page intentionally left blank.

# List of Tables

Table 1-1: HPERC-IBR-M Specifications. .2
Table 1-2: System Power Requirements (without GPGPU) . ..5
Table 1-3: System Power Requirements (with GPGPU) ..... ...6
Table 1-4: Environmental Requirements ........ .....6
Table 1-5: I/O Panel Connectors (Refer to Figure 1-7 for connector locations.)..... .... 13
Table 1-6: P1 Military DC Power In Connector Signals . .. 13
Table 1-7: P2 Military Connector Signals. .. 15
Table 1-8: P3 Connector Pin Signals. ..18

This page intentionally left blank.

# 1 HPERC-IBR-M Setup

# 1.1 About the HPERC-IBR-M

The HPERC products are intended for users of embedded systems requiring long life-cycles, configuration control, and ruggedness in hardened military packages. HPERC models feature Extreme Rugged™ computer boards available with varieties of processors and memory. An optional operating system (OS) can be pre-loaded onto an optional internal storage device (two 2 ½" Solid State Drives (SSDs). Board Support Packages (BSPs) are provided on the optional Support Software QuickDrive™ to support additional OSs. Just use a USB memory to load your application software and you are ready to use your system.

# 1.2 Using this Guide

This guide provides the most efficient way to set up your HPERC-IBR-M with your desired OS. The instructions provided in this guide include:

X Removing the HPERC-IBR-M from the shipping container and inspecting the accessories
X Connecting peripherals to the HPERC-IBR-M
X Powering up the HPERC-IBR-M

Information not provided in this User’s Guide includes:

X Board or Module specifications
X Board or Module header signals and descriptions
X Operating system programming or operating instructions

NOTE: Refer to OS manufacturers’ manuals for instructions when using OS software.

# 1.3 Requirements

The following peripherals and devices are needed to make full use of the HPERC-IBR-M.

X Peripherals (user-provided):
Z USB or PS/2 keyboard
Z USB or PS/2 mouse
Z Display monitor

NOTE: The items listed above are not available from ADLINK.

X Power Supply (optional):
Z AC Adapter (with plug-type mating cord)

# 1.4 Device/Peripheral Connections

X Ethernet (LAN) connections
X USB device connections
X At least one PCI/104-Express expansion module

# 1.5 Specifications

<table><tr><td>VITA Standards</td><td>VITA 75</td></tr><tr><td rowspan="2">Mechanical</td><td>MC:Form Factor: VITA-75.22 Conductive ColdplateDimension: 223.38(L) x 177.8(W) x 68.7(H) mm (with mounting brackets)Weight: 3.12 kg</td></tr><tr><td>MH:Form Factor: VITA-75 Finned Passive ConvectionDimension: 304.8(L) x 150(W) x 101.95(H) mm (with mounting brackets)Weight: 3.91 kg</td></tr><tr><td>Processor</td><td>22nm FCBGA Intel® CoreTM i7 Processor4-core Intel® CoreTM i7-3612QE Processor, 2.1 GHz, 6MB L3 cache, TDP 35W2-core Intel® CoreTM i7-3517UE Processor, 1.7 GHz, 4MB L3 cache, TDP 17W</td></tr><tr><td>Chipset</td><td>Intel® BD82QM77 Platform Controller Hub (PCH)</td></tr><tr><td>Host Memory</td><td>Dual channel DDR3-1066/1333 SDRAM with ECC, total up to 16GBOne channel in SODIMM sockets up to 8GBOne channel soldered onboard to 8GB</td></tr><tr><td>BIOS</td><td>AMI EFI BIOS, 64Mbit SPI flash memory</td></tr><tr><td>Graphics</td><td>Integrated in processorOne VGA, two DVI and one HDMI</td></tr><tr><td>GPGPU</td><td>General-purpose GPU via MXM slot (PCIe x16 Gen3)GT745M with 2 GB GDDR5 128-bit RAMGTX950M with 2 GB GDDR5 128-bit RAM</td></tr><tr><td>Gigabit Ethernet</td><td>Four Intel® I210 10/100/1000BASE-T ports</td></tr><tr><td>Serial Port</td><td>Seven RS-232/RS-422 serial ports</td></tr><tr><td>USB 2.0</td><td>Six USB 2.0 ports routed</td></tr><tr><td>PS/2</td><td>One PS/2 Keyboard portOne PS/2 Mouse port</td></tr><tr><td>GPIO</td><td>Eight digital IO</td></tr><tr><td>Audio Port</td><td>One amplified stereo outputOne stereo input</td></tr><tr><td>TPM</td><td>Atmel AT97SC3204-U1A190 TPM</td></tr><tr><td>Storage Interface</td><td>Two SATA 6 Gb/s direct connector for 2.5&quot; onboard driveSLC/MLC SSD on SATA 6 Gb/s (up to 1 TB)One removable SDIO socket supports up to 64GB SDHC on panel</td></tr><tr><td>RAID</td><td>Supports RAID 0/1</td></tr><tr><td>I/O Connector</td><td>MIL-DTL-38999 (uniquely-keyed)</td></tr><tr><td>Expansion Busses</td><td>MXM (3rd Generation PCIe x16)PCI/104 Express® Type 2 (PCIe Gen2)PCI Express Mini Card (PCIe Gen2)</td></tr><tr><td>OS Compatibility</td><td>Microsoft Windows 7 64-bitMicrosoft WES7 x86/x64Wind River VxWorks 6.9.3.1 BSPOther OS support on request</td></tr></table>

Table 1-1: HPERC-IBR-M Specifications

<table><tr><td rowspan="2">Operating Temperature</td><td>MC:Baseplate Point Extreme Rugged-40°C to +85°C (i7-3517UE)-40°C to +80°C (i7-3612QE)Coldplate conductionVITA 75.22 mount</td></tr><tr><td>MH:Ambient:40°C to +70°C at 1 atm airHeatsink (free air convection)VITA 75.21 mount</td></tr><tr><td>Storage Temperature</td><td>-55°C to 85°C</td></tr><tr><td>Power</td><td>Input: +10 to +36VDC inputPerformance:P-State 0-16 (Speedstep &amp; Turbo)S-State: S3, S4</td></tr><tr><td>Relative Humidity</td><td>95% at +60°C non-condensing</td></tr><tr><td>Immersion</td><td>IEC60529 Edition 2.2: 2013; IP67</td></tr><tr><td>Shock</td><td>MIL-STD-810G, 516.6 Procedure I (Functional Shock)Table 516.6-I (40 G for Ground Equipment)MIL-STD-810G, 516.6 Procedure V (Crash Hazard)Table 516.6-I (75 G for Crash Hazard Shock)</td></tr><tr><td>Vibration</td><td>MIL-STD-810G, Table 514.6C-X. Category 9- Helicopter vibration exposure (General)MIL-STD-810G, Figure 514.6C-10 Category 11 - Rail cargo vibration exposure.MIL-STD-810G, Figure 514.6D-9. Category 21 -Shipboard random vibration exposureMIL-STD-810G Table 514.6C-VI Category 4- Composite wheeled vehicle vibration exposure</td></tr><tr><td>EMC Compliance</td><td>MIL-STD-461F certificationTest Item Ground Army, Aircraft, Navy complianceCE101: Navy ASW aircraft &amp; Army aircraft (incl. flight line, below 28V)CE102: Ground Army, Aircraft, NavyCS101: Ground Army, Aircraft, NavyCS115: Ground Army, Aircraft, NavyRE102: Air &amp; space(fixed Wing External and Helicopters)RS101: Ground ArmyRS103: 100V/m (Ground Army, Ground Navy)RE101: Ground NavyCS106: Ground Army, Aircraft, Navy (Vpeak=400V)CS114: Aircraft (External or safety critical) -Curve5CS116: Ground Army, Aircraft, Navy (Imax=10A)FCC EN55022 Class A</td></tr></table>

Table 1-1: HPERC-IBR-M Specifications

# 1.6 Block Diagram

![**Labeled Blocks:**\n*   DDR3 1333MHz with 64bit +8bit ECC (2 Ranks)\n*   DDR3 1333MHz with 64bit +8bit ECC SO-DIMM (2 Ranks)\n*   Intel® Core™ i7 Processor\n*   MXM Connector\n*   Intel® QM77 PCH\n*   PEX 8618 PCIe Switch (1 & 2)\n*   XIO2001 PCIe-to-PCI Bridge\n*   Mini-PCIe slot\n*   PCI/104-Express – Type-B Connector\n*   PCI/104-Express – Type-A connector (Type-2)\n*   4x Intel I210 GbE\n*   USB to SDIO\n*   Super I/O SCH31141\n*   F81216AU-I\n\n**Connections:**\n*   **Memory to Processor:** Both 'DDR3 1333MHz with 64bit +8bit ECC (2 Ranks)' and 'DDR3 1333MHz with 64bit +8bit ECC SO-DIMM (2 Ranks)' connect to the 'Intel® Core™ i7 Processor'.\n*   **Processor to PCH:** The processor connects to the 'Intel® QM77 PCH' via links labeled 'DMI' and 'FDI'.\n*   **Processor to Graphics:** The processor connects to the 'MXM Connector' via a 'PCIe x16 Link'.\n*   **PCH to Left-Side Interfaces:** The 'Intel® QM77 PCH' connects to external interfaces labeled '2x SATA', '2x DVI-D', 'VGA', 'HD Audio', '6x USB 2.0', and '2x eSATA'.\n*   **USB to SDIO:** The 'USB to SDIO' block connects to the PCH via 'USB 2.0', and 'SDI' connects to the 'USB to SDIO' block.\n*   **PCH to PCIe Switch:** The PCH connects to the 'PEX 8618 PCIe Switch (1 & 2)' via two links labeled 'PCIe x4'.\n*   **PEX Switch to Bridges/Slots:** The switch connects to the 'XIO2001 PCIe-to-PCI Bridge' and the 'Mini-PCIe slot' each via a 'PCIe x1' link.\n*   **XIO2001 to Connector:** The 'XIO2001 PCIe-to-PCI Bridge' connects to the 'PCI/104-Express – Type-B Connector' via a link labeled 'PCI-32bit 33/66MHz'.\n*   **PEX Switch to Type-A Connector (via PCIe):** The switch connects to the 'PCI/104-Express – Type-A connector (Type-2)' via links labeled '2x PCIe x4' and '4x PCIe x1'.\n*   **PEX Switch to GbE:** The switch connects to the '4x Intel I210 GbE' block via a '4x PCIe x1' link.\n*   **GbE to Type-A Connector:** The '4x Intel I210 GbE' block connects to the 'PCI/104-Express – Type-A connector (Type-2)'.\n*   **PCH Direct to Type-A Connector:** The PCH connects directly to the 'PCI/104-Express – Type-A connector (Type-2)' via links labeled '2x SATA', 'LPC Bus', 'SMBus', '2x USB2.0', and '2x USB3.0'.\n*   **PCH to Super I/O:** The PCH connects to the 'Super I/O SCH31141' and 'F81216AU-I' blocks via the 'LPC Bus'.\n*   **Super I/O Outputs:** The 'Super I/O SCH31141' connects to 'PS/2' and '3x RS232/422'. The 'F81216AU-I' connects to '4x RS232/422'.](.hperc-ibr-m-50-1z178-1000-100-pm-en/c811a301ca1cafcb838ff2310f638941529c63e2f2ca2d3c876fa4de9d427beb.jpg)

Figure 1-1: HPERC-IBR-M Block Diagram

# 1.7 Power Specifications (without GPGPU)

Table 1-2 defines the current draw values of the HPERC-IBR-M, featuring either the 3517UE, or 3612QE i7 CPUs. The table captures In-Rush, Idle, and Burn-In-Test (BIT) currents.

Table 1-2 lists the current draw values of the HPERC-IBR-M.

<table><tr><td>Parameter</td><td>1.7GHz CPU (i7-3517UE)</td><td>2.1GHz CPU (i7-3612QE)</td></tr><tr><td>Input Type</td><td>+28 VDC Regulated DC</td><td>+24 VDC Regulated DC</td></tr><tr><td>In-Rush Peak Current and Duration</td><td>See Figure 1-2</td><td>Not yet measured</td></tr><tr><td>Idle Current and Power (Windows 7)</td><td>0.79A (22.22W)</td><td>0.89A (21.5W)</td></tr><tr><td>BIT Current and Power</td><td>1.18A (32.96W)</td><td>2.17A (52.05W)</td></tr></table>

Table 1-2: System Power Requirements (without GPGPU)

Operating configurations:

X In-rush operating configuration includes one VGA monitor and 8GB DDR3-1333L RAM.
X Idle operating configuration includes the In-rush configuration as well as one SATA 2.5" HDD with Windows 7 and one USB keyboard and mouse.
X BIT (Burn-In-Test) operating configuration is the same as the Idle configuration

![| Time (ms) | CH1 Value | CH2 Value |\n|-----------|-----------|-----------|\n| 0         | 0         | 0         |\n| 500       | ~1.0      | ~5.0      |\n| 5.00      | ~0.1      | ~4.8      |\n| 10.0      | ~0.1      | ~4.8      |\n| 1.90      | ~0.1      | ~4.8      |](.hperc-ibr-m-50-1z178-1000-100-pm-en/4d8d3c67d199678df26b2d896127da281bab1672ec89a823a321efb22bdbf85b.jpg)

Figure 1-2: i7-3517UE Peak In-Rush Current and Duration (without GPGPU)

# 1.8 Power Specifications (with GPGPU)

Table 1-3 defines the current draw values of the HPERC-IBR-M, 3612QE i7 CPUs. The table captures Idle, and Burn-In-Test (BIT) currents.

Table 1-3 lists the current draw values of the HPERC-IBR-M

# Configuration

X CPU: Intel® Core™ i7-3612QE Processor (6M cache, up to 2.10 GHz, Max Turbo Frequency 3.1GHz)
X Memory: Micro PC3-10700 DDR3 1600 8G x2 (onboard and slot), total 16GB
X Storage: Transcend 256G TS256GSSD370I $2 . 5 " \times 2$ (6GB/S) x2
X GPGPU: NVIDIA GeForce GT 745M - X3N745M-FN
X Mini PCIe: Innodisk\_MiniPCIeDOM\_1ME 64G (Gen1)

<table><tr><td>Parameter</td><td>2.1GHz CPU (i7-3612QE)</td></tr><tr><td>Input Type</td><td>+24 VDC Regulated DC</td></tr><tr><td>Windows Idle mode</td><td>24V, 1.27A, 30.48WESIT disabled: 24V, 1.33A, 31.92W</td></tr><tr><td>Windows typical mode(Burn in test 100% loading)</td><td>24V, 2.50A, 60WESIT disabled: 24V, 2.25A, 54W</td></tr><tr><td>Windows MAX mode(Intel® Thermal Analysis Tool 100% loading)</td><td>24V, 2.88A, 69.1WESIT disabled: 24V, 2.79A, 66.96W</td></tr></table>

Table 1-3: System Power Requirements (with GPGPU)

# 1.9 Environmental Specifications

Table 1-4 provides the most efficient operating and storage condition ranges required for this system.

<table><tr><td colspan="2">Temperature</td><td colspan="2">Humidity</td></tr><tr><td>Operating</td><td>Storage</td><td>Operating</td><td>Non-operating</td></tr><tr><td>HPERC-MC (conduction coo)-40° to +85°C (CoreTM i7-3517UE 17W)-40° to +80°C (CoreTM i7-3612QE 35W)(temp. of hottest/ coldest point on baseplate)</td><td rowspan="2">-55° to +85°C</td><td rowspan="2">5% to 90%relative humidity,non-condensing</td><td rowspan="2">5% to 95%relative humidity,non-condensing</td></tr><tr><td>HPERC-MH (air cooled)-40°C to +70°C at 1 atm air(required airflow TBD)</td></tr></table>

Table 1-4: Environmental Requirements

# 1.10 What’s in the Box

The Contents List identifies the items in the shipping box for the HPERC-IBR-M Unit and HPERC-IBR-M Accessories (sold separately.) See Figure 1-3.

![HPERC-MH\nCooling Fins\n(pre-installed on\nMH version only)\nHPERC-MC\nADLINK\nTECHNOLOGY INC.\nMounting Brackets\nCold Plate\n(pre-installed on\nMC version, only)](.hperc-ibr-m-50-1z178-1000-100-pm-en/62db2c4f912baa9d5c475fdc1250a3259e9fa920e9f5e2bb7bb382fc290f6f43.jpg)

![HPERC Accessories (sold separately)\nBreakout Cables\nDC Cable Connector\nAC Adapter\nAC Mating Cable\nBreakout Cables](.hperc-ibr-m-50-1z178-1000-100-pm-en/6db39958775baf59643bcc4af7b67ba070cdbba8775030ba83d62cf4eb6c8f3e.jpg)

Figure 1-3: HPERC-IBR-M Unit with Accessories

# 1.11 Setup Steps

Follow the setup steps in this section in the order listed. Skip any steps that do not apply to your application.

<table><tr><td>Open shipping box.</td><td>Locate the HPERC-IBR-M Contents List.Unpack the contents of the shipping box.</td></tr><tr><td>Verify contents.</td><td>Verify the contents of the shipping box against the Contents List included with your HPERC-IBR-M.If anything is missing or damaged, call your sales representative. Refer to the ADLINK web page at www.adlinktech.com for contact information.</td></tr></table>

# 1.12 Setting Up the Work Space

CAUTION: To prevent damage to the HPERC-IBR-M, ensure sufficient clearance exists around the cooling solution for unrestricted airflow.

The air temperature inside the enclosure could rise above the specified operating temperature limits if the airflow through the cooling solution is restricted.

<table><tr><td>Select workbench location.</td><td>The workbench location should be a flat clean surface for setup and operation (including the connection of any external peripherals and optional devices).Ensure sufficient airflow clearance exists around the complete enclosure.</td></tr><tr><td>Unpack HPERC-IBR-M.</td><td>Remove the HPERC-IBR-M from its shipping container and place it on a flat work surface.The HPERC-IBR-M enclosure combined with CPU, storage (SSD), and the desired OS form a complete system, ready for operation.</td></tr></table>

# 1.13 Installing Mounting Screws

<table><tr><td>Install mounting screws.</td><td>• Install mounting screws (not included) for surface or wall mounting to the mounting brackets of the HPERC-IBR-M. See Figure 1-4 and Figure 1-5.</td></tr></table>

Torque Values

<table><tr><td>Nominal Diameter</td><td>Material: Stainless Steel A2-70 and A4-70</td><td>Material: Stainless Steel A2-80 and A4-80</td><td>Material: SCM3 (SCM435) Strength Grade: 12.9</td></tr><tr><td>M6 (HPERC-IBR-MC)</td><td>7.6 Nm</td><td>11.1 Nm</td><td>13.83 Nm</td></tr><tr><td>M8 (HPERC-IBR-MH)</td><td>18.4 Nm</td><td>26.7 Nm</td><td>33.34 Nm</td></tr></table>

HPERC-IBR-MH
![5.91'\n(150mm)\n4.33'\n(110mm)\nØ0.37'\n(Ø9.5mm)\nØ0.37'\n(Ø9.5mm)\n12.00'\n(304.8mm)\n8.00'\n(203.2mm)\n1.00'\n(25.4mm)\n2.00'\n(50.8mm)\n2.76'\n(70mm)\n1.57'\n(40mm)\n1.00'\n(25.4mm)](.hperc-ibr-m-50-1z178-1000-100-pm-en/76a5654553ed705533e02cf45e5244b9413cae02af18b3add7e6dc3e6be83f92.jpg)

![ADLINK\nTECHNOLOGY INC.\n4.01'\n(101.95mm)\n1.33'\n(33.8mm)\n1.10'\n(27.87mm)\n1.41'\n(35.82mm)\n2.95'\n(75mm)](.hperc-ibr-m-50-1z178-1000-100-pm-en/96e9ddd629406899a858f47123f8398205d28940f662cd9506b71dd0615c5b1a.jpg)

Figure 1-4: Top and Front Views of “MH” Enclosure with Mounting Dimensions

# HPERC-IBR-MC

X The HPERC-IBR-MC unit coldplate is flat to a tolerance of ±0.1 mm across the diagonal. It is recommended that the surface on which the HPERC-IBR-MC will be mounted is flat to a tolerance of ±0.15 mm across the diagonal.

![7.00'\n(177.8mm)\n6.50'\n(165.1mm)\n5.91'\n(150mm)\nØ0.28'\n(Ø7.15mm)\nx8pcs\n2.00'\n(50.8mm)\n6.00'\n(152.4mm)\n8.00'\n(203.2mm)\n8.55'\n(217.07mm)\n8.79'\n(223.38mm)\nADLINK\nTECHNOLOGY INC.\n0.55'\n(13.9mm)](.hperc-ibr-m-50-1z178-1000-100-pm-en/cb41bce000b27937f70f716139aa6cc8a7ea1d969a31d2281336c58efb7239e6.jpg)

![1.37'\n(34.9mm)\n1.96'\n(49.72mm)\n3.50'\n(88.9mm)\n2.70'\n(68.7mm)\n1.61'\n(40.83mm)](.hperc-ibr-m-50-1z178-1000-100-pm-en/50ae73af18827f751837fd5b9e944de48f61157779b166a5e9bd57b2ef28d2a3.jpg)

Figure 1-5: Top and Front Views of “MC” Enclosure with Mounting Dimensions

Optional mounting points for surface/wall mounting or heat sink (HPERC-IBR-MC only

• Mounting holes “A” and “B” are shown below in Figure 1-6. Note the recommended torque values and maximum depth of hole “B”.

Mounting Hole “A” Size: M4 threaded

Maximum Torque: 30 Kgf-cm (2.85 N-m)

Mounting Hole “B” Size: M4 threaded, max. depth 7mm

Maximum Torque: 41 Kgf-cm (4 N-m)

![| Dimension | Value     |\n| --------- | --------- |\n| (154.94mm) | 6.10'     |\n| (58.1mm)  | 2.29'     |\n| (54mm)    | 2.13'     |\n| (35.5mm)  | 1.40'     |\n| (194.2mm) | 7.65'     |\n| (102.15mm)| 4.02'     |\n| (43.78mm)| 1.72'     |\n| (14.6mm)  | 0.57'     |\n| (88.9mm)| 1.40'     |\n| (130.5mm)| 3.50'     |\n| (148.4mm)| 5.84'     |\n| (50.8mm)| 2.00'     |\n| (72.5mm)| 2.85'     |\n| (50.8mm)| 2.00'     |\n| (156.8mm)| 6.17'     |](.hperc-ibr-m-50-1z178-1000-100-pm-en/3893ed68d7f1d9226536a579a038f645e6737ba5cf54f143342e396d02d3d11c.jpg)

Figure 1-6: Bottom View of “MC” Enclosure with Mounting Holes

# 1.14 Connecting Peripherals

<table><tr><td>Connect the appropriate military breakout cable to the corresponding HPERC-IBR-M military connector. See Figure 1-3 for illustrations of cables. See Figure 1-7 for locations of the HPERC-IBR-M military connectors.</td><td>·Refer to Figure 1-7 for locations and descriptions of the connectors before making connections or powering on the HPERC-IBR-M.</td></tr><tr><td>&lt;img src="images/72ae0fc2b37b6d55066dc2ca6b7d3d492b593312a5205597dbff45a762ae90d9.jpg"/&gt;</td><td>·Connect the USB or PS2 keyboard to the corresponding connector on the appropriate breakout cable.</td></tr><tr><td>&lt;img src="images/0ca2647b23fe81c01b9258eea49e1dfe911f8ed06c042dc05dc70c4df9f4b031.jpg"/&gt;</td><td>·Connect the USB or PS2 mouse to the appropriate connector on the corresponding breakout cable.</td></tr><tr><td>&lt;img src="images/e193a636303958a9a48c2cda734fe0b25a5c3c24e684f31214c9c1fbb925c683.jpg"/&gt;</td><td>·Connect the VGA or LCD display to the appropriate connector on the corresponding breakout cable.</td></tr></table>

![ADLINK\nTECHNOLOGY INC.\nHPERC-IBR-MH\nP2\nP1\nP3\nP2 Military\nConnector\nP1 DC\nPower In\nP3 Military\nConnector\nHPERC-IBR-MC](.hperc-ibr-m-50-1z178-1000-100-pm-en/6ea50babeb5aeb7206ed1a8bdbb440bb7e2e76504cda4f5ac36aeb30052b742a.jpg)

Figure 1-7: Front View of HPERC-IBR-M I/O Panel

<table><tr><td>Control/Connector</td><td>Description</td></tr><tr><td>P1 DC Power In</td><td>This Military Power connector accepts DC voltages from an external source.NOTE: This connector is manufactured by Amphenol.</td></tr><tr><td>P2 Military Connector</td><td>This military connector provides signals for Ethernet Ports, USB 2.0, Serial Ports, Reset Switch, Ethernet LEDs, Power LED, SATA Activity LED, UNDIO, Power Switch, Audio In/Out.</td></tr><tr><td>P3 Military Connector</td><td>This military connector provides signals for VGA, Ethernet LEDs, Ethernet Ports, Serial Ports, PS/2 Keyboard and Mouse, DVI, USB 2.0.</td></tr><tr><td>L1/L2 LEDs</td><td>Both LEDs light amber to indicate that the system is powered on (programmable functionality is reserved for future revisions).</td></tr></table>

Table 1-5: I/O Panel Connectors (Refer to Figure 1-7 for connector locations.)
NOTE: To connect an external Hard Disk Drive (HDD) or CD-ROM to the HPERC-IBR-M, use one of the USB or SATA ports to connect the device.

# 1.15 P1 Military DC Power In Connector

The following diagram and table define the signals and signal maps of the P1 military DC power in connector.

![GND V+\nA\nD C B\nHPERC_DC_In_Pinout_b\nGND V+](.hperc-ibr-m-50-1z178-1000-100-pm-en/681db4f2c511508854a9d6ac3e1c717d5d7efd9562d946d748233bbc1d96484e.jpg)

Figure 1-8: P1 Military DC Power In Connector Pin Locations

<table><tr><td>P1 Pin</td><td>Signal</td></tr><tr><td>A</td><td>V+</td></tr><tr><td>B</td><td>V+</td></tr><tr><td>C</td><td>Ground</td></tr><tr><td>D</td><td>Ground</td></tr></table>

Table 1-6: P1 Military DC Power In Connector Signals

# 1.16 P2 and P3 Military Connector

The following two tables define the signals and signal maps of the two military I/O connectors (P2 and P3) on the HPERC-IBR-M. Each table lists the P2 or P3 pin numbers, the signal names and descriptions and the corresponding pins of the internal IO boards (HIBR and Interface Board.) Figure 1-9 provides the number and location of each pin on the two military connectors.

![| Value | Label |\n|---|---|\n| 8 | 1 |\n| 9 | 2 |\n| 10 | 3 |\n| 11 | 4 |\n| 12 | 5 |\n| 13 | 6 |\n| 14 | 7 |\n| 15 | 8 |\n| 16 | 9 |\n| 17 | 10 |\n| 18 | 11 |\n| 19 | 12 |\n| 20 | 13 |\n| 21 | 14 |\n| 22 | 15 |\n| 23 | 16 |\n| 24 | 17 |\n| 25 | 18 |\n| 26 | 19 |\n| 27 | 20 |\n| 28 | 21 |\n| 29 | 22 |\n| 30 | 23 |\n| 31 | 24 |\n| 32 | 25 |\n| 33 | 26 |\n| 34 | 27 |\n| 35 | 28 |\n| 36 | 29 |\n| 37 | 30 |\n| 38 | 31 |\n| 39 | 32 |\n| 40 | 33 |\n| 41 | 34 |\n| 42 | 35 |\n| 43 | 36 |\n| 44 | 37 |\n| 45 | 38 |\n| 46 | 39 |\n| 47 | 40 |\n| 48 | 41 |\n| 49 | 42 |\n| 50 | 43 |\n| 51 | 44 |\n| 52 | 45 |\n| 53 | 46 |\n| 54 | 47 |\n| 55 | 48 |\n| 56 | 49 |\n| 57 | 50 |\n| 58 | 51 |\n| 59 | 52 |\n| 60 | 53 |\n| 61 | 54 |\n| 62 | 55 |\n| 63 | 56 |\n| 64 | 57 |\n| 65 | 58 |\n| 66 | 59 |\n| 67 | 60 |\n| 68 | 61 |\n| 69 | 62 |\n| 70 | 63 |\n| 71 | 64 |\n| 72 | 65 |\n| 73 | 66 |\n| 74 | 67 |\n| 75 | 68 |\n| 76 | 69 |\n| 77 | 70 |\n| 78 | 71 |\n| 79 | 72 |\n| 80 | 73 |\n| 81 | 74 |\n| 82 | 75 |\n| 83 | 76 |\n| 84 | 77 |\n| 85 | 78 |\n| 86 | 79 |\n| 87 | 80 |\n| 88 | 81 |\n| 89 | 82 |\n| 90 | - |\n| -105-115-122-123-124-125-126-127-128-129-130-131-132-133-134-135-136-137-138-139-140-141-142-143-144-145-146-147-148-149-150-151-152-153-154-155-156-157-158-159-160-161-162-163-164-165-166-167-168-169-170-171-172-173-174-175-176-177-178-179-180-181-182-183-184-185-186-187-188-189-190-191-192-193-194-195-196-197-198-199-200-201-202-203-204-205-206-207-208-209-210-211-212-213-214-215-216-217-218-219-220-221-222-223-224-225-226-227-228-229-230-231-232-233-234-235-236-237-238-239-240-241-242-243-244-245-246-247-248-249-250-251-252-253-254-255-256-257-258-259-260-261-262-263-264-265-266-267-268-269-270-271-272-273-274-275-276-277-278-279-280-281-282-283-284-285-286-287-288-289-290-291-292\n● (ring symbol) indicates the value for each data point.](.hperc-ibr-m-50-1z178-1000-100-pm-en/35b4e1d68dca14739d41d017aee06bbf0eaaa9fefe686b0ff9bf4d68590cd6d4.jpg)

Figure 1-9: P2 and P3 Military Interface Connector Pin Locations

# 1.16.1 P2 Pin Definitions

Table 1-7 Provides the pin definitions and signal maps for the P2 Military Connector.

<table><tr><td>P2 Pin</td><td>Interface</td><td>Signal</td><td>Signal Description</td></tr><tr><td>1</td><td>Gigabit Ethernet 1</td><td>GbE2_MDI0_P</td><td>Ethernet1 MDI0 Positive</td></tr><tr><td>2</td><td>Gigabit Ethernet 1</td><td>GbE2_MDI1_N</td><td>Ethernet1 MDI1 Negative</td></tr><tr><td>3</td><td>Gigabit Ethernet 1</td><td>GbE2_MDI1_P</td><td>Ethernet1 MDI1 Positive</td></tr><tr><td>4</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>5</td><td>Gigabit Ethernet 1</td><td>GbE2_MDI2_N</td><td>Ethernet1 MDI2 Negative</td></tr><tr><td>6</td><td>Gigabit Ethernet 1</td><td>GbE2_MDI2_P</td><td>Ethernet1 MDI2 Positive</td></tr><tr><td>7</td><td>Gigabit Ethernet 1</td><td>GbE2_MDI3_N</td><td>Ethernet1 MDI3 Negative</td></tr><tr><td>8</td><td>Gigabit Ethernet 1</td><td>GbE2_MDI0_N</td><td>Ethernet1 MDI0 Negative</td></tr><tr><td>14</td><td>Gigabit Ethernet 1</td><td>GbE2_MDI3_P</td><td>Ethernet1 MDI3 Positive</td></tr><tr><td>9</td><td>USB 2.0, Port 4</td><td>USB_P4</td><td>Data Positive</td></tr><tr><td>10</td><td>USB 2.0, Port 4</td><td>USB_N4</td><td>Data Negative</td></tr><tr><td>11</td><td>USB 2.0, Port 4</td><td>USB_GND4</td><td>Ground</td></tr><tr><td>12</td><td>USB 2.0, Port 5</td><td>USB_P5</td><td>Data Positive</td></tr><tr><td>13</td><td>USB 2.0, Port 5</td><td>USB_N5</td><td>Data Negative</td></tr><tr><td>27</td><td>USB 2.0, Port 5</td><td>USB_GND5</td><td>Ground</td></tr><tr><td>15</td><td>USB 2.0, Port 4</td><td>P5V_USB4</td><td>+5 Volts Power</td></tr><tr><td>16</td><td>USB 2.0, Port 5</td><td>P5V_USB5</td><td>+5 Volts Power</td></tr><tr><td>17</td><td>Serial 4</td><td>RS422_TX4_N</td><td>Transmit Data Negative</td></tr><tr><td>18</td><td>Serial 4</td><td>RS422_TX4_P</td><td>Transmit Data Positive</td></tr><tr><td>19</td><td>Serial 4</td><td>RS422_RX4_N</td><td>Receive Data Negative</td></tr><tr><td>20</td><td>Serial 4</td><td>RS422_RX4_P</td><td>Receive Data Positive</td></tr><tr><td>21</td><td>Serial 6</td><td>RS422_RX6_N</td><td>Receive Data Negative</td></tr><tr><td>22</td><td>Serial 6</td><td>RS422_RX6_P</td><td>Receive Data Positive</td></tr><tr><td>23</td><td>Serial 6</td><td>RS422_TX6_N</td><td>Transmit Data Negative</td></tr><tr><td>24</td><td>Serial 6</td><td>RS422_TX6_P</td><td>Transmit Data Positive</td></tr><tr><td>25</td><td>Power</td><td>P5V</td><td>+5 Volts Power</td></tr><tr><td>26</td><td>Power</td><td>P5V</td><td>+5 Volts Power</td></tr><tr><td>27</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>28</td><td>USB 2.0, Port 8</td><td>USB_PWR8</td><td>USB 2.0 +5V Power</td></tr><tr><td>30</td><td>USB 2.0, Port 8</td><td>USB_P8</td><td>USB 2.0 Data Positive</td></tr><tr><td>31</td><td>USB 2.0, Port 8</td><td>USB_N8</td><td>USB 2.0 Data Negative</td></tr><tr><td>32</td><td>USB 2.0, Port 8</td><td>USB_GND8</td><td>USB 2.0 Ground</td></tr><tr><td>29</td><td>Reset Switch</td><td>RESET#_HDR</td><td>Resets the system</td></tr><tr><td>38</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>33</td><td>Control/Indicator</td><td>PWR_LED</td><td>Power LED (330ohm to +5V)</td></tr><tr><td>44</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>34</td><td>Control/Indicator</td><td>PCIe_ETH_2/5_LED1</td><td>Ethernet LED</td></tr><tr><td>44</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>35</td><td>NC</td><td>NC</td><td>Not Connected</td></tr><tr><td>44</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>36</td><td>Control/Indicator</td><td>HPOUT_R</td><td>Audio Right</td></tr><tr><td>37</td><td>Control/Indicator</td><td>HPOUT_L</td><td>Audio Left</td></tr><tr><td>38</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>39</td><td>Power</td><td>PV5</td><td>+5 Volts Power</td></tr><tr><td>40</td><td>Power</td><td>PV5</td><td>+5 Volts Power</td></tr><tr><td>38</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>41</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>42</td><td>User Defined IO</td><td>UDNIO11</td><td>User Input/Output Port 11</td></tr><tr><td>43</td><td>User Defined IO</td><td>UDNIO12</td><td>User Input/Output Port 12</td></tr><tr><td>38</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>44</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>45</td><td>User Defined IO</td><td>UDNIO13</td><td>User Input/Output Port 13</td></tr><tr><td>46</td><td>User Defined IO</td><td>UDNIO14</td><td>User Input/Output Port 14</td></tr><tr><td>38</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>47</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>48</td><td>User Defined IO</td><td>UDNIO15</td><td>User Input/Output Port 15</td></tr><tr><td>49</td><td>User Defined IO</td><td>UDNIO16</td><td>User Input/Output Port 16</td></tr><tr><td>50</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>51</td><td>User Defined IO</td><td>UDNIO17</td><td>User Input/Output Port 17</td></tr><tr><td>52</td><td>User Defined IO</td><td>UDNIO18</td><td>User Input/Output Port 18</td></tr><tr><td>53</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>54</td><td>User Defined IO</td><td>UDNIO19</td><td>User Input/Output Port 19</td></tr><tr><td>55</td><td>User Defined IO</td><td>UDNIO20</td><td>User Input/Output Port 20</td></tr><tr><td>56</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>57-81</td><td>NC</td><td>NA</td><td>NA</td></tr><tr><td>71</td><td>User Defined IO</td><td>UDNIO5</td><td>User Input/Output Port 5</td></tr><tr><td>72</td><td>User Defined IO</td><td>UDNIO6</td><td>User Input/Output Port 6</td></tr><tr><td>73</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>74</td><td>User Defined IO</td><td>UDNIO7</td><td>User Input/Output Port 7</td></tr><tr><td>75</td><td>User Defined IO</td><td>UDNIO8</td><td>User Input/Output Port 8</td></tr><tr><td>76</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>77</td><td>User Defined IO</td><td>UDNIO9</td><td>User Input/Output Port 9</td></tr><tr><td>78</td><td>User Defined IO</td><td>UDNIO10</td><td>User Input/Output Port 10</td></tr><tr><td>79</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>82</td><td>Control/Indicator</td><td>LINE_IN_R</td><td>Audio In Right Channel</td></tr><tr><td>83</td><td>Control/Indicator</td><td>LINE_IN_L</td><td>Audio In Left Channel</td></tr><tr><td>84</td><td>NC</td><td>NC</td><td>NC</td></tr><tr><td>85</td><td>Ground</td><td>AGND</td><td>Analog Ground</td></tr><tr><td>86</td><td>Ground</td><td>AGND</td><td>Analog Ground</td></tr><tr><td>87</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>88</td><td>User Defined IO</td><td>UDNIO1</td><td>User Input/Output Port 1</td></tr><tr><td>89</td><td>User Defined IO</td><td>UDNIO2</td><td>User Input/Output Port 2</td></tr><tr><td>90</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>91</td><td>User Defined IO</td><td>UDNIO3</td><td>User Input/Output Port 3</td></tr><tr><td>92</td><td>User Defined IO</td><td>UDNIO4</td><td>User Input/Output Port 4</td></tr><tr><td>93</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>94</td><td>Power</td><td>P3V3_S</td><td>+3.3 Volts Standby</td></tr><tr><td>95</td><td>Power</td><td>P3V3_S</td><td>+3.3 Volts Standby</td></tr><tr><td>96</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>98</td><td>Power Switch</td><td>PWERBTN_HDR</td><td>Powers on the system</td></tr><tr><td>97</td><td>USB 2.0, Port 9</td><td>USB_PWR9</td><td>USB 2.0 +5V Power</td></tr><tr><td>99</td><td>USB 2.0, Port 9</td><td>USB_N9</td><td>USB 2.0 Data Negative</td></tr><tr><td>100</td><td>USB 2.0, Port 9</td><td>USB_P9</td><td>USB 2.0 Data Positive</td></tr><tr><td>101</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>102</td><td>Control/Indicator</td><td>SATA_LED#</td><td>SATA LED</td></tr><tr><td>101</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>103</td><td>NC</td><td>NC</td><td>NC</td></tr><tr><td>101</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>104</td><td>Control/Indicator</td><td>ERASE- L</td><td>GPIO Signal for SSD Secure Erase</td></tr><tr><td>101</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>105</td><td>Power</td><td>P3V3_S</td><td>+3.3 Volts Standby</td></tr><tr><td>106</td><td>Power</td><td>P3V3_S</td><td>+3.3 Volts Standby</td></tr><tr><td>107</td><td>Serial 5</td><td>RS422_TX5_N</td><td>Transmit Data Negative</td></tr><tr><td>108</td><td>Serial 5</td><td>RS422_TX5_P</td><td>Transmit Data Positive</td></tr><tr><td>109</td><td>Serial 5</td><td>RS422_RX5_N</td><td>Receive Data Negative</td></tr><tr><td>110</td><td>Serial 5</td><td>RS422_RX5_P</td><td>Receive Data Positive</td></tr><tr><td>111</td><td>Serial 7</td><td>RS422_TX7_N</td><td>Transmit Data Negative</td></tr><tr><td>112</td><td>Serial 7</td><td>RS422_TX7_P</td><td>Transmit Data Positive</td></tr><tr><td>113</td><td>Serial 7</td><td>RS422_RX7_N</td><td>Receive Data Negative</td></tr><tr><td>114</td><td>Serial 7</td><td>RS422_RX7_P</td><td>Receive Data Positive</td></tr><tr><td>116-120</td><td>NC</td><td>NA</td><td>NA</td></tr><tr><td>115</td><td>Serial 0</td><td>RS422_TX0_N</td><td>Transmit Data Negative</td></tr><tr><td>122</td><td>Serial 0</td><td>RS422_TX0_P</td><td>Transmit Data Positive</td></tr><tr><td>123</td><td>Serial 0</td><td>RS422_RX0_N</td><td>Receive Data Negative</td></tr><tr><td>124</td><td>Serial 0</td><td>RS422_RX0_P</td><td>Receive Data Positive</td></tr><tr><td>125</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>126</td><td>Serial 2</td><td>RS422_TX2_N</td><td>Transmit Data Negative</td></tr><tr><td>127</td><td>Serial 2</td><td>RS422_TX2_P</td><td>Transmit Data Positive</td></tr><tr><td>128</td><td>Serial 2</td><td>RS422_RX2_N</td><td>Receive Data Negative</td></tr><tr><td>121</td><td>Serial 2</td><td>RS422_RX2_P</td><td>Receive Data Positive</td></tr></table>

Table 1-7: P2 Military Connector Signals

# 1.16.2 P3 Pin Definitions

Table 1-8 Provides the pin definitions and signal maps for the P3 Military Connector.

<table><tr><td>P3 Pin</td><td>Interface</td><td>Signal</td><td>Signal Description</td></tr><tr><td>1</td><td>VGA</td><td>VGA_VSYNC</td><td>Vertical Sync</td></tr><tr><td>2</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>33</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>3</td><td>VGA</td><td>VGA_DDC_SCL</td><td>Display Data Channel - Serial Clock</td></tr><tr><td>4</td><td>VGA</td><td>VGA_DDC_SDA</td><td>Display Data Channel - Serial Data</td></tr><tr><td>5</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>6</td><td>VGA</td><td>RED</td><td>Red Analog Output</td></tr><tr><td>18</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>7</td><td>VGA</td><td>GREEN</td><td>Green Analog Output</td></tr><tr><td>21</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>14</td><td>VGA</td><td>BLUE</td><td>Blue Analog Output</td></tr><tr><td>30</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>8</td><td>VGA</td><td>HSYNC</td><td>Horizontal Sync</td></tr><tr><td>9</td><td>Power</td><td>P3V3_S</td><td>+3.3 Volts Standby</td></tr><tr><td>10</td><td>Power</td><td>P3V3_S</td><td>+3.3 Volts Standby</td></tr><tr><td>11</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>12</td><td>Power</td><td>P3V3_S</td><td>+3.3 Volts Standby</td></tr><tr><td>13</td><td>Power</td><td>P3V3_S</td><td>+3.3 Volts Standby</td></tr><tr><td>15</td><td>Power</td><td>P3V3_S</td><td>+3.3 Volts Standby</td></tr><tr><td>38</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>24</td><td>Control/Indicator</td><td>PCIe_ETH_5/5_LED1</td><td>Ethernet LED</td></tr><tr><td>99</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>114</td><td>Control/Indicator</td><td>PCIe_ETH_4/5_LED1</td><td>Ethernet LED</td></tr><tr><td>99</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>121</td><td>Control/Indicator</td><td>PCIe_ETH_3/5_LED1</td><td>Ethernet LED</td></tr><tr><td>99</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>16</td><td>Gigabit Ethernet 4</td><td>GbE5_MDI0_N</td><td>Ethernet4 MDI0 Negative</td></tr><tr><td>17</td><td>Gigabit Ethernet 4</td><td>GbE5_MDI0_P</td><td>Ethernet4 MDI0 Positive</td></tr><tr><td>18</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>19</td><td>Gigabit Ethernet 4</td><td>GbE5_MDI1_N</td><td>Ethernet4 MDI1 Negative</td></tr><tr><td>20</td><td>Gigabit Ethernet 4</td><td>GbE5_MDI1_P</td><td>Ethernet4 MDI1 Positive</td></tr><tr><td>21</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>22</td><td>Gigabit Ethernet 4</td><td>GbE5_MDI2_N</td><td>Ethernet4 MDI2 Negative</td></tr><tr><td>23</td><td>Gigabit Ethernet 4</td><td>GbE5_MDI2_P</td><td>Ethernet4 MDI2 Positive</td></tr><tr><td>100</td><td>Gigabit Ethernet 4</td><td>GbE5_MDI3_N</td><td>Ethernet4 MDI3 Negative</td></tr><tr><td>101</td><td>Gigabit Ethernet 4</td><td>GbE5_MDI3_P</td><td>Ethernet4 MDI3 Positive</td></tr><tr><td>25</td><td>Serial 1</td><td>RS422_TX1_N</td><td>Transmit Data Negative</td></tr><tr><td>26</td><td>Serial 1</td><td>RS422_TX1_P</td><td>Transmit Data Positive</td></tr><tr><td>27</td><td>Serial 1</td><td>RS422_RX1_N</td><td>Receive Data Negative</td></tr><tr><td>28</td><td>Serial 1</td><td>RS422_RX1_P</td><td>Receive Data Positive</td></tr><tr><td>29</td><td>NC</td><td>NA</td><td>NA</td></tr><tr><td>108</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>36</td><td>Gigabit Ethernet 2</td><td>GbE3_MDI2_N</td><td>Ethernet2 Negative</td></tr><tr><td>37</td><td>Gigabit Ethernet 2</td><td>GbE3_MDI2_P</td><td>Ethernet2 Positive</td></tr><tr><td>38</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>39</td><td>Gigabit Ethernet 2</td><td>GbE3_MDI3_N</td><td>Ethernet3 Negative</td></tr><tr><td>40</td><td>Gigabit Ethernet 2</td><td>GbE3_MDI3_P</td><td>Ethernet3 Positive</td></tr><tr><td>41</td><td>NA</td><td>GND</td><td>Ground</td></tr><tr><td>42</td><td>Gigabit Ethernet 2</td><td>GbE3_MDI1_N</td><td>Ethernet1 Negative</td></tr><tr><td>43</td><td>Gigabit Ethernet 2</td><td>GbE3_MDI1_P</td><td>Ethernet1 Positive</td></tr><tr><td>44</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>45</td><td>Gigabit Ethernet 2</td><td>GbE3_MDI0_N</td><td>Ethernet0 Negative</td></tr><tr><td>46</td><td>Gigabit Ethernet 2</td><td>GbE3_MDI0_P</td><td>Ethernet0 Positive</td></tr><tr><td>47</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>48</td><td>DVI 1</td><td>DDIB_P2</td><td>Digital Display Interface Port B, TMDS Data 0 Positive</td></tr><tr><td>49</td><td>DVI 1</td><td>DDIB_N2</td><td>Digital Display Interface Port B, TMDS Data 0 Negative</td></tr><tr><td>50</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>51</td><td>DVI 1</td><td>DDIB_P1</td><td>Digital Display Interface Port B, TMDS Data 1 Positive</td></tr><tr><td>52</td><td>DVI 1</td><td>DDIB_N1</td><td>Digital Display Interface Port B, TMDS Data 1 Negative</td></tr><tr><td>53</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>54</td><td>DVI 1</td><td>DDIB_P0</td><td>Digital Display Interface Port B, TMDS Data 2 Positive</td></tr><tr><td>55</td><td>DVI 1</td><td>DDIB_N0</td><td>Digital Display Interface Port B, TMDS Data 2 Negative</td></tr><tr><td>56</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>57</td><td>DVI 1</td><td>DDIB_P3</td><td>Digital Display Interface Port B, TMDS Clock Positive</td></tr><tr><td>58</td><td>DVI 1</td><td>DDIB_N3</td><td>Digital Display Interface Port B, TMDS Clock Negative</td></tr><tr><td>59</td><td>DVI 1</td><td>DDIB_CLK_AUXP</td><td>Digital Display Interface Port B, DDC Serial Clock</td></tr><tr><td>60</td><td>DVI 1</td><td>DDIB_DAT_AUXN</td><td>Digital Display Interface Port B, DDC Serial Data</td></tr><tr><td>61</td><td>DVI 1</td><td>DDPB_HPD</td><td>Digital Display Port B Hot Plug Detect</td></tr><tr><td>94</td><td>DVI 1</td><td>DDPB_AUX_SEL</td><td>Digital Display Port B Auxiliary Select</td></tr><tr><td>62</td><td>DVI 2</td><td>DDIC_CLK_AUXP</td><td>Digital Display Interface Port C, DDC Serial Clock</td></tr><tr><td>63</td><td>DVI 2</td><td>DDIC_DAT_AUXN</td><td>Digital Display Interface Port C, DDC Serial Data</td></tr><tr><td>64</td><td>DVI 2</td><td>DDPC_HPD</td><td>Digital Display Port C Hot Plug Detect</td></tr><tr><td>71</td><td>DVI 2</td><td>DDIC_P2</td><td>Digital Display Interface Port C, TMDS Data 0 Positive</td></tr><tr><td>72</td><td>DVI 2</td><td>DDIC_N2</td><td>Digital Display Interface Port C, TMDS Data 0 Negative</td></tr><tr><td>76</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>73</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>74</td><td>DVI 2</td><td>DDIC_P1</td><td>Digital Display Interface Port C, TMDS Data 1 Positive</td></tr><tr><td>75</td><td>DVI 2</td><td>DDIC_N1</td><td>Digital Display Interface Port C, TMDS Data 1 Negative</td></tr><tr><td>76</td><td>NC</td><td>NA</td><td>NA</td></tr><tr><td>77</td><td>DVI 2</td><td>DDIC_P0</td><td>Digital Display Interface Port C, TMDS Data 2 Positive</td></tr><tr><td>78</td><td>DVI 2</td><td>DDIC_N0</td><td>Digital Display Interface Port C, TMDS Data 2 Negative</td></tr><tr><td>76</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>79</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>80</td><td>DVI 2</td><td>DDIC_P3</td><td>Digital Display Interface Port C, TMDS Clock Positive</td></tr><tr><td>81</td><td>DVI 2</td><td>DDIC_N3</td><td>Digital Display Interface Port C, TMDS Clock Negative</td></tr><tr><td>95</td><td>DVI 2</td><td>DDPC_AUX_SEL</td><td>DisplayPort C Auxiliary Select</td></tr><tr><td>65</td><td>PS/2 Mouse</td><td>CLK_MS_CON</td><td>Mouse Clock</td></tr><tr><td>66</td><td>PS/2 Mouse</td><td>DAT_MS_CON</td><td>Mouse Data</td></tr><tr><td>76</td><td>NC</td><td>NA</td><td>NA</td></tr><tr><td>67</td><td>PS/2 Keyboard</td><td>CLK_KBD_CON</td><td>Keyboard Clock</td></tr><tr><td>68</td><td>PS/2 Keyboard</td><td>DAT_KBD_CON</td><td>Keyboard Data</td></tr><tr><td>79</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>69</td><td>PS/2 Mouse Keyboard</td><td>POWER</td><td>POWER</td></tr><tr><td>70</td><td>RCA Jack</td><td>COMPOSITE_OUT</td><td>Composite Out</td></tr><tr><td>82-84</td><td>NC</td><td>NA</td><td>NA</td></tr><tr><td>87-89</td><td>NC</td><td>NA</td><td>NA</td></tr><tr><td>103</td><td>USB 2.0, Port 2</td><td>USB_P2</td><td>USB 2.0 Data Positive, TMDS_P2_SDA</td></tr><tr><td>104</td><td>USB 2.0, Port 2</td><td>USB_N2</td><td>USB 2.0 Data Negative, TMDS_P2_SCL</td></tr><tr><td>125</td><td>USB 2.0, Port 2</td><td>P5V_USB2_P2</td><td>USB 2.0 +5VDC</td></tr><tr><td>126</td><td>NC</td><td>NA</td><td>NA</td></tr><tr><td>85-86, 90-93</td><td>NC</td><td>NA</td><td>NA</td></tr><tr><td>34</td><td>USB 2.0, Port 3</td><td>USB_P3</td><td>Data Positive, LVDS Display Data Channel - Data</td></tr><tr><td>35</td><td>USB 2.0, Port 3</td><td>USB_N3</td><td>Data Negative, LVDS Display Data Channel - Clock</td></tr><tr><td>127</td><td>USB 2.0, Port 3</td><td>P5V_USB2_P3</td><td>USB 2.0 +5VDC</td></tr><tr><td>128</td><td>NC</td><td>NA</td><td>NA</td></tr><tr><td>96</td><td>Power</td><td>PV5</td><td>+5 Volts Power, DisplayPort D Auxiliary Select</td></tr><tr><td>97</td><td>Power</td><td>PV5</td><td>+5 Volts Power, High Definition Control Run</td></tr><tr><td>98</td><td>Power</td><td>PV5</td><td>+5 Volts Power, PCIe_ETH_2/5_LED2</td></tr><tr><td>99</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>102</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>106</td><td>Gigabit Ethernet 3</td><td>GbE4_MDI1_N</td><td>Ethernet1 Negative</td></tr><tr><td>107</td><td>Gigabit Ethernet 3</td><td>GbE4_MDI1_P</td><td>Ethernet1 Positive</td></tr><tr><td>109</td><td>Gigabit Ethernet 3</td><td>GbE4_MDI0_N</td><td>Ethernet0 Negative</td></tr><tr><td>110</td><td>Gigabit Ethernet 3</td><td>GbE4_MDI0_P</td><td>Ethernet0 Positive</td></tr><tr><td>111</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>112</td><td>Gigabit Ethernet 3</td><td>GbE4_MDI2_N</td><td>Ethernet2 Negative</td></tr><tr><td>113</td><td>Gigabit Ethernet 3</td><td>GbE4_MDI2_P</td><td>Ethernet2 Positive</td></tr><tr><td>30</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>31</td><td>Gigabit Ethernet 3</td><td>GbE4_MDI3_N</td><td>Ethernet3 MDI3 Negative</td></tr><tr><td>32</td><td>Gigabit Ethernet 3</td><td>GbE4_MDI3_P</td><td>Ethernet3 MDI3 Positive</td></tr><tr><td>115</td><td>Power</td><td>PV5</td><td>+5 Volts Power, TV OUT Color</td></tr><tr><td>122</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>123</td><td>Power</td><td>PV5</td><td>+5 Volts Power, TV OUT Luminance)</td></tr><tr><td>124</td><td>Ground</td><td>GND</td><td>Ground</td></tr><tr><td>116</td><td>NC</td><td>NA</td><td>NA</td></tr><tr><td>117</td><td>NC</td><td>NA</td><td>NA</td></tr><tr><td>118</td><td>NC</td><td>NA</td><td>NA</td></tr><tr><td>119</td><td>NC</td><td>NA</td><td>NA</td></tr><tr><td>120</td><td>NC</td><td>NA</td><td>NA</td></tr></table>

Table 1-8: P3 Connector Pin Signals

# 1.17 Applying Power to the HPERC-IBR-M

<table><tr><td>1) Follow these steps to apply power to the HPERC-IBR-M.</td><td>Connect the AC Mating Cable to the AC Adapter (options.) See Figure 1-3.Plug in the DC Cable Connector from the AC Adapter (option) to the DC IN jack onthe HPERC-IBR-M. See Figure 1-7.CAUTION:Power supplied to the unit must be within the allowed range depending on the model of the unit:+10VDC to +36VDCCAUTION:Failure to provide proper power may damage the system and void the warranty.Plug in the VGA or LCD monitor&#x27;s power cord to an AC outlet and turn on the monitor.Plug in the AC Mating cable to an AC outlet.Press the HPERC-IBR-M Power On button on the breakout cable to power on the HPERC-IBR-M.</td></tr><tr><td>2) Verify the HPERC-IBR-M satisfactorily powers on.</td><td>To enter the BIOS Setuppress thekey during power-on self test (POST).Use BIOS Setup during the initial boot to set the desired options.You should see POST complete successfully before the system starts loading the operating system (optional.) If you are using Linux, the boot loader will appear first, similar to the one shown below with the corresponding OS name displayed.</td></tr><tr><td colspan="2">(The Linux x.x OS is shown as an example.)GNU GRUB version 0.xx (xxxxk lower/xxxxxx upper memory)Linux Kernel 2.6.x-xxx (recovery mode)Use the▲and▼keys to select which entry is highlighted. Press Enter to boot the selected OS, ‘e’ to edit the commands before booting, ‘a’ to modify the kernel arguments before booting, or ‘c’ for a command-line.</td></tr></table>

<table><tr><td>3) Using the Operating System (OS)</td><td>You should see a prompt on the monitor screen indicating the OS is loading, or has loaded.Refer to the respective OS manual (not supplied by ADLINK.)</td></tr></table>

# 2 Internal Components

The HPERC-IBR-M enclosure allows installation and removal of components including Solid State Drives (SSDs), SD memory card, PCI/104-Express expansion module, SODIMM memory, and Mini PCIe Card.

Opening and resealing any of the openings on the HPERC-IBR-M enclosure may compromise the IP67 ingress rating performance of the system. It is strongly recommended to return the system to ADLINK for servicing.

If you wish to attempt access of any of the HPERC-IBR-M’s internal components, ADLINK cannot guarantee that the IP67 rating will be maintained. Please contact your ADLINK representative for instructions on how to access the internal components of the HPERC-IBR-M.

This page intentionally left blank.

# 3 BIOS Setup

This chapter provides information on how to read information from and configure the BIOS Setup utility of the HPERC-IBR-M.

# 3.1 Menu Structure

This section presents the primary menus of the BIOS Setup Utility. Use the following table as a quick reference for the contents of the BIOS Setup Utility. The subsections in this section describe the submenus and setting options for each menu item. The default setting options are presented in bold, and the function of each setting is described in the right hand column of the respective table.

<table><tr><td>Main</td><td>Advanced</td><td>Security</td><td>Security</td><td>Boot</td><td>Save &amp; Exit</td></tr><tr><td>BIOS Information Processor Information IGFX VBIOS Version Total Memory PCH Information ME Information System Language System Management ▶ System Date System Time</td><td>Watch Dog Timer Intel PXE option ROM ACPI Settings ▶ Trusted Computing ▶ CPU Configuration ▶ SATA Configuration ▶ Intel(R) Rapid Start Technology ▶ Intel TXT(LT) Configuration ▶ PCH-FW Configuration ▶ Intel(R) Anti-Theft Technology Configuration ▶ USB Configuration ▶ F81216 Second Super IO Configuration ▶ Super IO Configuration ▶ H/W Monitor ▶ Serial Port Console Redirection ▶ AMI Graphic Output Protocol Policy ▶ MXM 3.0/Hybrid Graphics ▶ Intel RC Drivers Version Detail ▶ CPU PPM Configuration ▶</td><td>PCH-IO Configuration ▶ System Agent (SA) Configuration ▶</td><td>Setup prompt Timeout Bootup NumLock State Quiet Boot Fast Boot Boot Option Priorities ▶ CSM Parameters ▶</td><td>Administrator Password User Password Secure Boot menu ▶</td><td>Save Options ▶ Default Options ▶ Boot Override ▶</td></tr></table>

Note:
► indicates a submenu

# 3.2 Main Menu

The Main Menu provides read-only information about your system and also allows you to set the System Date and Time. Refer to the tables below for details of the submenus and settings.

3.2.1 BIOS Information

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>BIOS Vendor</td><td>Info only</td><td>Vendor</td></tr><tr><td>Core Version</td><td>Info only</td><td>Version</td></tr><tr><td>Compliancy</td><td>Info only</td><td>Compliancy Information</td></tr><tr><td>Project Version</td><td>Info only</td><td>Project Version</td></tr><tr><td>Build Data and Time</td><td>Info only</td><td>Data and Time</td></tr><tr><td>Access Level</td><td>Info only</td><td>Level type</td></tr></table>

3.2.2 Processor Information

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Name</td><td>Info only</td><td>Chipset String.</td></tr><tr><td>CPU brand string</td><td>Info only</td><td>CPU Brand String.</td></tr><tr><td>Frequency</td><td>Info only</td><td>Standard CPU frequency.</td></tr><tr><td>Processor ID</td><td>Info only</td><td>CPUID.</td></tr><tr><td>Stepping</td><td>Info only</td><td>CPU Stepping.</td></tr><tr><td>CPU Signature</td><td>Info only</td><td>Signature</td></tr><tr><td>Number of Processors</td><td>Info only</td><td>Cores number.</td></tr><tr><td>Microcode Revision</td><td>Info only</td><td>Microcode revision.</td></tr><tr><td>GT Info</td><td>Info only</td><td>Internal Graphics Frequency.</td></tr><tr><td>IGFX VBIOS version</td><td>Info only</td><td>IGFX VBIOS version.</td></tr><tr><td>Memory RC version</td><td>Info only</td><td>Memory RC version.</td></tr><tr><td>Total Memory</td><td>Info only</td><td>Total memory size.</td></tr><tr><td>Emory Frequency</td><td>Info only</td><td>memory Frequency.</td></tr></table>

3.2.3 PCH Information

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Name</td><td>Info only</td><td>PCH String.</td></tr><tr><td>Stepping</td><td>Info only</td><td>PCH Stepping.</td></tr><tr><td>ME FW Version</td><td>Info only</td><td>ME FW Version.</td></tr></table>

3.2.4 System Language

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>System Language</td><td>English</td><td>Choose the system default language</td></tr></table>

# 3.2.5 System Date and Time

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>System Date</td><td>Weekday, MM/DD/YYYY</td><td>Requires the alpha-numeric entry of the day of the week, day of the month, calendar month, and all 4 digits of the year, indicating the century and year (Fri XX/XX/20XX)</td></tr><tr><td>System Time</td><td>HH/MM/SS</td><td>Presented as a 24-hour clock setting in hours, minutes, and seconds</td></tr></table>

# 3.3 Advanced Menu

This menu contains the settings for most of the user interfaces in the system

# 3.3.1 ACPI and Power Management

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Enable ACPI Auto Configuration</td><td>DisabledEnabled</td><td>Enable/Disable BIOS ACPI Auto Configuration.</td></tr><tr><td>Enable Hibernation</td><td>DisabledEnabled</td><td>Enable/Disable System ability to hibernate. This option may be not effective with some OS.</td></tr><tr><td>ACPI Sleep State</td><td>S3 only (Suspend to RAM)Suspend Disabled</td><td>Select ACPI sleep state the system will enter when the SUSPEND button is pressed.</td></tr></table>

# 3.3.2 Trusted Computing

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Security Device Support</td><td>DisabledEnabled</td><td>Enable/Disable Security Device. NOTE: Your Computer will reboot during restart in order to change State of the Device..</td></tr></table>

3.3.3 CPU

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>CPU</td><td colspan="2">Info only</td></tr><tr><td>CPU Signature</td><td>Info only</td><td>Display CPU Signature</td></tr><tr><td>Microcode Patch</td><td>Info only</td><td>Display CPU Microcode version</td></tr><tr><td>Max CPU Speed</td><td>Info only</td><td>Display CPU Max frequency</td></tr><tr><td>Min CPU speed</td><td>Info only</td><td>Display CPU Min frequency</td></tr><tr><td>CPU Speed</td><td>Info only</td><td>Display CPU frequency</td></tr><tr><td>Processor Cores</td><td>Info only</td><td>Display number of processor</td></tr><tr><td>Intel HT Technology</td><td>Info only</td><td>Display Intel HT technology support</td></tr><tr><td>Intel VT-x Technology</td><td>Info only</td><td>Display Intel VT-x technology support</td></tr><tr><td>Intel SMX Technology</td><td>Info only</td><td>Display Intel SMX technology support</td></tr><tr><td>64-bit</td><td>Info only</td><td>Display 64-bit support</td></tr><tr><td>L1 Data Cache</td><td>Info only</td><td>Display L1 data cache size</td></tr><tr><td>L1 Code Cache</td><td>Info only</td><td>Display L1 code cache size</td></tr><tr><td>L2 Cache</td><td>Info only</td><td>Display L2 cache size</td></tr><tr><td>L3 Cache</td><td>Info only</td><td>Display L3 cache size</td></tr><tr><td>Hyper-threading</td><td>Disabled Enabled</td><td>Enabled for Windows XP and Linux (OS optimized for Hyper-Threading Technology) and Disabled for other OS (OS not optimized for Hyper-Threading Technology). When Disabled only one thread per enabled core is enabled..</td></tr><tr><td>Active Processor Cores</td><td>All 1 2 3</td><td>Number of cores to enable in each processor package.</td></tr><tr><td>Limit CPUID Maximum</td><td>Disabled Enabled</td><td>Enabled/Disabled CPUID Maximum limit.</td></tr><tr><td>Execute Disable Bit</td><td>Disabled Enabled</td><td>XD can prevent certain classes of malicious buffer overflow attacks when combined with a supporting OS (Windows Server 2003 SP1, Windows XP SP2, SuSE Linux 9.2, Red Hat Enterprise 3 Update 3.).</td></tr><tr><td>Intel Virtualization Technology</td><td>Disabled Enabled</td><td>When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool technology.</td></tr><tr><td>Hardware Prefetcher</td><td>Disabled Enabled</td><td>To turn on/off the Mid Level Cache (L2) streamer prefetcher.</td></tr></table>

# 3.3.4 SATA

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>SATA</td><td colspan="2">Info only</td></tr><tr><td>SATA Mode Selection</td><td>IDEAHCIRAID</td><td>Determines how SATA Controller(s) operate.</td></tr><tr><td>SATA Test Mode</td><td>DisabledEnabled</td><td>Test mode Enabled / Disabled</td></tr><tr><td>SATA Controller Speed</td><td>DefaultGen1Gen2Gen3</td><td>Indicates the maximum speed the SATA controller can support.</td></tr><tr><td>SATA Port Configuration</td><td colspan="2">SATA Device Options Settings</td></tr><tr><td>Serial ATA Port 0-6</td><td colspan="2"></td></tr><tr><td>Port #</td><td>DisabledEnabled</td><td>Enable or Disable SATA Port</td></tr><tr><td>Hot Plug</td><td>DisabledEnabled</td><td>Designates this port as Hot Pluggable</td></tr><tr><td>External SATA</td><td>DisabledEnabled</td><td>External SATA Support.</td></tr></table>

# 3.3.5 Intel Rapid Start Technology

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Intel Rapid Start technology</td><td colspan="2">Info only</td></tr><tr><td>Intel(R) Rapid Start</td><td>DisabledEnabled</td><td>Enable or disable Intel(R) Rapid Start Technology.</td></tr><tr><td>Entry on S3 RTC Wake</td><td>DisabledEnabled</td><td>iFFS invocation upon S3 RTC wake.</td></tr><tr><td>Entry on After</td><td>Immediately1 minute2 minute5 minute10 minute15 minute30 minute1 hour1hour</td><td>Enable RTC wake timer at S3 entry.</td></tr><tr><td>Active Page Threshold Support</td><td>DisabledEnabled</td><td>Support RST with small partition.</td></tr><tr><td>iFFS Display Save/Restore</td><td>DisabledEnabled</td><td>iFFS Display Save/Restore.</td></tr></table>

# 3.3.6 Intel TXT(LT) Technology

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Intel TXT(LT) Configuration</td><td colspan="2">Info only</td></tr><tr><td>Intel TXT(LT) Support</td><td>DisabledEnabled</td><td>Enables or Disables Intel(R) TXT(LT) support.</td></tr></table>

# 3.3.7 PCH-FW Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>ME FW Version</td><td colspan="2">Info only</td></tr><tr><td>ME FW Mode</td><td colspan="2">Info only</td></tr><tr><td>ME FW Type</td><td colspan="2">Info only</td></tr><tr><td>ME FW SKU</td><td colspan="2">Info only</td></tr></table>

# 3.3.8 Intel Anti-Theft Technology Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Intel(R) Anti-Theft Technology Configuration</td><td colspan="2">Info only</td></tr><tr><td>Intel(R) Anti-Theft Technology</td><td>Disabled Enabled</td><td>Enable/Disable Intel(R) AT in BIOS for testing only.</td></tr><tr><td>Intel(R) Anti-Theft Technology Recovery</td><td>1-64</td><td>Set the number of times Recovery attempted will be allowed.</td></tr></table>

# 3.3.9 USB

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>USB Module version</td><td colspan="2">Info only</td></tr><tr><td>USB Devices:</td><td colspan="2">Info only</td></tr><tr><td>Legacy USB Support</td><td>EnabledDisabled</td><td>Enables Legacy USB support.</td></tr><tr><td>XHCI Hand-off</td><td>EnabledDisabled</td><td>This is a workaround for OSes without XHCI hand-off support.</td></tr><tr><td>EHCI Hand-off</td><td>EnabledDisabled</td><td>This is a workaround for OSes without EHCI hand-off support.</td></tr><tr><td>USB Mass Storage Driver Support</td><td>EnabledDisabled</td><td>Enable/Disable USB Mass Storage Driver Support.</td></tr><tr><td>USB Configuration</td><td colspan="2">PCH USB Configuration</td></tr><tr><td>USB transfer time-out</td><td>1 sec5 sec10 sec20 sec</td><td>The time-out value for Control, Bulk, and Interrupt transfers.</td></tr><tr><td>Device reset time-out</td><td>10 sec20 sec30 sec40 sec</td><td>USB mass storage device start unit command time-out.</td></tr><tr><td>Device power-up delay</td><td>AutoManual</td><td>Maximum time the device will take before it properly reports itself to the host controller.</td></tr></table>

# 3.3.10 F81216 Second Super IO

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>I81216 Super IO Configuration</td><td colspan="2">Info only</td></tr><tr><td>Serial Port 0 Configuration</td><td>Submenu</td><td>Set Parameters of Serial Port 0.</td></tr><tr><td>Serial Port 1 Configuration</td><td>Submenu</td><td>Set Parameters of Serial Port 1.</td></tr><tr><td>Serial Port 2 Configuration</td><td>Submenu</td><td>Set Parameters of Serial Port 2.</td></tr><tr><td>Serial Port 3 Configuration</td><td>Submenu</td><td>Set Parameters of Serial Port 3.</td></tr></table>

F81216 Second Super IO > Serial Port 0-3 Configuration

<table><tr><td>Feature</td><td>Options</td><td colspan="2">Description</td></tr><tr><td>Serial Port 0 Configuration</td><td colspan="3">Info only</td></tr><tr><td>Serial Port</td><td>DisabledEnabled</td><td colspan="2">Enable or Disable Serial Port (COM)</td></tr><tr><td>Device Setting</td><td colspan="3">Info only</td></tr><tr><td>Change Setting</td><td colspan="2">AutoIO=260;IRQ=11;IO=260;IRQ=10,11,12IO=268;IRQ=10,11,12IO=270;IRQ=10,11,12IO=278;IRQ=10,11,12</td><td>Select an optimal settings for Super IO Device.</td></tr><tr><td>RS232/RS422</td><td colspan="2">RS232RS422</td><td>RS232/RS422 selection</td></tr></table>

# 3.3.11 Super IO

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>SCH3114 Super IO Configuration</td><td colspan="2">Info only</td></tr><tr><td>Serial Port 0 Configuration</td><td>Submenu</td><td>Set Parameters of Serial Port 0.</td></tr><tr><td>Serial Port 1 Configuration</td><td>Submenu</td><td>Set Parameters of Serial Port 1.</td></tr><tr><td>Serial Port 2 Configuration</td><td>Submenu</td><td>Set Parameters of Serial Port 2.</td></tr></table>

Super IO > Serial Port 0-2 Configuration

<table><tr><td>Feature</td><td>Options</td><td colspan="2">Description</td></tr><tr><td>Serial Port 1 Configuration</td><td colspan="3">Info only</td></tr><tr><td>Serial Port</td><td>DisabledEnabled</td><td colspan="2">Enable or Disable Serial Port (COM)</td></tr><tr><td>Device Setting</td><td colspan="3">Info only</td></tr><tr><td>Change Setting</td><td colspan="2">AutoIO=3F8;IRQ=4;IO=3F8;IRQ=3,4,5,6,7,9,10,11,12IO=2F8;IRQ=3,4,5,6,7,9,10,11,12IO=3E8;IRQ=3,4,5,6,7,9,10,11,12IO=2E8;IRQ=3,4,5,6,7,9,10,11,12</td><td>Select an optimal settings for Super IO Device.</td></tr><tr><td>RS232/RS422</td><td colspan="2">RS232RS422</td><td>RS232/RS422 selection</td></tr></table>

# 3.3.12 H/W Monitor

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>PC Health Status</td><td colspan="2">Info only</td></tr><tr><td>Internal Diode Temper</td><td colspan="2">Info only</td></tr><tr><td>+2.5V</td><td colspan="2">Info only</td></tr><tr><td>Vccp</td><td colspan="2">Info only</td></tr><tr><td>VCC</td><td colspan="2">Info only</td></tr><tr><td>+5.0V</td><td colspan="2">Info only</td></tr><tr><td>+12V</td><td colspan="2">Info only</td></tr><tr><td>VTR</td><td colspan="2">Info only</td></tr></table>

3.3.13 Serial Port Console

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Serial Port Console</td><td colspan="2">Info only</td></tr><tr><td>COM0</td><td colspan="2">Info only</td></tr><tr><td>Console Redirection</td><td>Disabled Enabled</td><td>Console Redirection enable or disable.</td></tr><tr><td>Console Redirection Settings</td><td>Submenu</td><td>The settings specify how the host computer and the remote computer (which the user is using) will exchange data. Both computers should have the same or compatible settings.</td></tr><tr><td>COM1</td><td colspan="2">Info only</td></tr><tr><td>Console Redirection</td><td>Disabled Enabled</td><td>Console Redirection enable or disable.</td></tr><tr><td>Console Redirection Settings</td><td>Submenu</td><td>The settings specify how the host computer and the remote computer (which the user is using) will exchange data. Both computers should have the same or compatible settings.</td></tr><tr><td>COM2</td><td colspan="2">Info only</td></tr><tr><td>Console Redirection</td><td>Disabled Enabled</td><td>Console Redirection enable or disable.</td></tr><tr><td>Console Redirection Settings</td><td>Submenu</td><td>The settings specify how the host computer and the remote computer (which the user is using) will exchange data. Both computers should have the same or compatible settings.</td></tr><tr><td>COM3</td><td colspan="2">Info only</td></tr><tr><td>Console Redirection</td><td>Disabled Enabled</td><td>Console Redirection enable or disable.</td></tr><tr><td>Console Redirection Settings</td><td>Submenu</td><td>The settings specify how the host computer and the remote computer (which the user is using) will exchange data. Both computers should have the same or compatible settings.</td></tr><tr><td>COM4</td><td colspan="2">Info only</td></tr><tr><td>Console Redirection</td><td>Disabled Enabled</td><td>Console Redirection enable or disable.</td></tr><tr><td>Console Redirection Settings</td><td>Submenu</td><td>The settings specify how the host computer and the remote computer (which the user is using) will exchange data. Both computers should have the same or compatible settings.</td></tr><tr><td>COM5</td><td colspan="2">Info only</td></tr><tr><td>Console Redirection</td><td>Disabled Enabled</td><td>Console Redirection enable or disable.</td></tr><tr><td>Console Redirection Settings</td><td>Submenu</td><td>The settings specify how the host computer and the remote computer (which the user is using) will exchange data. Both computers should have the same or compatible settings.</td></tr><tr><td>COM6</td><td colspan="2">Info only</td></tr><tr><td>Console Redirection</td><td>Disabled Enabled</td><td>Console Redirection enable or disable.</td></tr><tr><td>Console Redirection Settings</td><td>Submenu</td><td>The settings specify how the host computer and the remote computer (which the user is using) will exchange data. Both computers should have the same or compatible settings.</td></tr></table>

Serial Port Console > Console Redirection Settings

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>COM0Console Redirection Settings</td><td colspan="2">Info only</td></tr><tr><td>Terminal Type</td><td>VT100VT100+VT-UTF8ANSI</td><td>VT100: ASCII char set.VT100+: Extends VT100 to support color, function keys, etc. VT-UTF8: Uses UTF8 encoding to map Unicode chars onto 1 or more bytes.ANSI: Extended ASCII char set.</td></tr><tr><td>Bits per second</td><td>9600192003840057600115200</td><td>Selects serial port transmission speed. The speed must be matched on the remote computer.Long or noisy lines may require lower speeds.</td></tr><tr><td>Data Bits</td><td>78</td><td>Select data bits.</td></tr><tr><td>Parity</td><td>NoneEvenOddMarkSpace</td><td>Select parity.</td></tr><tr><td>Stop Bits</td><td>12</td><td>Select number of stop bits.</td></tr><tr><td>Flow Control</td><td>NoneHardware RTS/CTS</td><td>Select flow control.</td></tr><tr><td>VT-UTF8 Combo Key Support</td><td>DisabledEnable</td><td>Enable VT-UTF8 combination key support for ANSI/VT100 terminals.</td></tr><tr><td>Recorder Mode</td><td>DisabledEnable</td><td>With this mode enabled only text will be sent.This is to capture terminal data.</td></tr><tr><td>Resolution 100x31</td><td>DisabledEnable</td><td>Enables or disables extended terminal resolution</td></tr><tr><td>Legacy OS Redirection</td><td>80x2480x25</td><td>On legacy OSes, the number of rows and columns supported by redirection</td></tr><tr><td>Putty Keypad</td><td>VT100LINUXXTERMR6SCOESCNVT400</td><td>Select Function Key and Keypad on Putty.</td></tr><tr><td>Redirection After BIOS Post</td><td>Always EnabledBootLoader</td><td>The Settings specify if BootLoader is selected, then legacy console redirection is disabled before booting to legacy OS.</td></tr></table>

# 3.3.14 AMI Graphic Output Protocol Policy

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Output Select</td><td>Info only</td><td>Output interface</td></tr><tr><td>Output Select</td><td>Info only</td><td>Output interface</td></tr><tr><td>Output Select</td><td>Info only</td><td>Output interface</td></tr><tr><td>Output Select</td><td>Info only</td><td>Output interface</td></tr><tr><td>Output Select</td><td>Info only</td><td>Output interface</td></tr><tr><td>Output Select</td><td>Info only</td><td>Output interface</td></tr><tr><td>Output Select</td><td>Info only</td><td>Output interface</td></tr><tr><td>Output Select</td><td>Info only</td><td>Output interface</td></tr><tr><td>Output Select</td><td>Info only</td><td>Output interface</td></tr><tr><td>Brightness setting</td><td>Info only</td><td>Output interface</td></tr></table>

# 3.3.15 MXM/3.0 Hybrid Graphics

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>MXM 3.0 Support</td><td>Disabled Enable</td><td>Enable/Disable the MXM 3.0 support</td></tr></table>

# 3.3.16 Intel RC Drivers Version Detail

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Intel CPU RC Version</td><td>Info only</td><td>Output interface</td></tr><tr><td>Intel SA RC Version</td><td>Info only</td><td>Output interface</td></tr><tr><td>Intel PCH RC Version</td><td>Info only</td><td>Output interface</td></tr><tr><td>Intel PPM RC Version</td><td>Info only</td><td>Output interface</td></tr><tr><td>Intel ACPI RC Version</td><td>Info only</td><td>Output interface</td></tr><tr><td>Intel ME RC Version</td><td>Info only</td><td>Output interface</td></tr><tr><td>Intel TXT RC Version</td><td>Info only</td><td>Output interface</td></tr><tr><td>Intel DTS RC Version</td><td>Info only</td><td>Output interface</td></tr><tr><td>Intel iFFS RC Version</td><td>Info only</td><td>Output interface</td></tr><tr><td>Intel DPTF RC Version</td><td>Info only</td><td>Output interface</td></tr></table>

3.3.17 CPU PPM Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>CPU PPM Configuration</td><td colspan="2">Info only</td></tr><tr><td>EIST</td><td>EnabledDisabled</td><td>Enable/Disable Intel SpeedStep.</td></tr><tr><td>Turbo Mode</td><td>EnabledDisabled</td><td>Enable/Disable Turbo Mode.</td></tr><tr><td>CPU C3 Report</td><td>EnabledDisabled</td><td>Enable/Disable CPU C3(ACPI C2) report to OS.</td></tr><tr><td>CPU C6 Report</td><td>EnabledDisabled</td><td>Enable/Disable CPU C6(ACPI C3) report to OS.</td></tr><tr><td>CPU C7 Report</td><td>EnabledDisabled</td><td>Enable/Disable CPU C7(ACPI C3) report to OS.</td></tr></table>

# 3.4 Chipset

3.4.1 PCH-IO Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>PCH LAN Controller</td><td>Disabled Enable</td><td>Enable or Disable onboard NIC</td></tr><tr><td>PCI Express Configuration</td><td>Submenu</td><td>PCI Express options settings</td></tr><tr><td>USB Configuration</td><td>Submenu</td><td>USB options settings</td></tr><tr><td>PCH Azalia Configuration</td><td>Submenu</td><td>PCH Azalia options settings</td></tr></table>

PCH-IO Configuration > PCI Express Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Subtractive Decode</td><td>Disabled Enable</td><td>Enable or disable PCI Express Subtractive Decode.</td></tr></table>

PCH-IO Configuration > PCI Express Configuration->PCI Express Root Port

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>PCI Express Root Port</td><td>Disabled Enable</td><td>Control the PCI Express Root Port.</td></tr></table>

PCH-IO Configuration > USB Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>EHCI1</td><td>Disabled Enable</td><td>Control the USB EHCI (USB 2.0) functions. One EHCI controller must always be enabled.</td></tr><tr><td>EHCI2</td><td>Disabled Enable</td><td>Control the USB EHCI (USB 2.0) functions. One EHCI controller must always be enabled.</td></tr></table>

PCH-IO Configuration > PCI Azalia Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Azalia</td><td>Disabled Enable</td><td>Control Detection of the Azalia device. Disabled = Azalia will be unconditionally disabled Enabled = Azalia will be unconditionally Enabled Auto = Azalia will be enabled if present, disabled otherwise.</td></tr></table>

3.4.2 System Agent Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>VT-d</td><td>Disabled Enable</td><td>Check to enable VT-d function on MCH</td></tr><tr><td>Graphics Configuration</td><td>Submenu</td><td>Graphics options settings</td></tr><tr><td>NB PCIE Configuration</td><td>Submenu</td><td>NB PCIE options settings</td></tr><tr><td>Memory Configuration</td><td>Submenu</td><td>Memory options settings</td></tr></table>

System Agent Configuration > Graphics Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Graphics</td><td colspan="2">Info only</td></tr><tr><td>IGFX VBIOS version</td><td colspan="2">Info only</td></tr><tr><td>Primary Display</td><td>AutoIGFXPEGPCIE</td><td>Select which of Auto/IGFX/PEG/PCIE Graphics device should be Primary Display.</td></tr><tr><td>Internal Graphics</td><td>EnabledDisabled</td><td>Keep IGD enabled based on the setup options.</td></tr><tr><td>GTT Size</td><td>1MB2MB</td><td>Select the GTT Size.</td></tr><tr><td>Aperture Size</td><td>128MB256MB512MB</td><td>Select the Aperture Size.</td></tr><tr><td>DVMT Pre-Allocated</td><td>32MB64MB96MB128MB160MB192MB224MB256MB288MB320MB352MB384MB416MB448MB480MB512MB</td><td>Select DVMT 5.0 Pre-Allocated Graphics Memory size used by the Internal Graphics Device.</td></tr><tr><td>DVMT Total Gfx Mem</td><td>128M256MMAX</td><td>Select DVMT5.0 Total Graphic Memory size used by the Internal Graphics Device.</td></tr><tr><td>LCD Control</td><td>Submenu</td><td>LCD Control options settings</td></tr></table>

System Agent Configuration > Graphics Configuration > LCD Control

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Primary IGFX Boot Display</td><td>Vbios DefaultCRTEFPLFPEFP3EFP2LFP2</td><td>Select the Video Device which will be activated during POST.</td></tr><tr><td>DDI Function choose</td><td>Display PortHDMI</td><td>DDI function choose to Display Port or HDMI.</td></tr><tr><td>Spread Spectrum clock Chip</td><td>OffHardwareSoftware</td><td>&gt;&gt;Hardware: Spread is controlled by chip;&gt;&gt;Software: Spread is controlled by BIOS.</td></tr></table>

System Agent Configuration > NB PCIE Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>PEG0</td><td colspan="2">Info only</td></tr><tr><td>PEG0 – Gen X</td><td>AutoGen1Gen2Gen3</td><td>Configure PEG0 B0:D1:F0 Gen1-Gen3.</td></tr></table>

System Agent Configuration > Memory Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Memory RC Version</td><td>Info only</td><td>Display memory RC Version</td></tr><tr><td>Memory Frequency</td><td>Info only</td><td>Display memory frequency</td></tr><tr><td>Total Memory</td><td>Info only</td><td>Display total system memory size</td></tr><tr><td>Memory Slot0</td><td>Info only</td><td>Display Slot 0 memory size</td></tr><tr><td>Memory Slot1</td><td>Info only</td><td>Display Slot 1 memory size</td></tr><tr><td>CAS Latency (tCL)</td><td>Info only</td><td>Memory Timing</td></tr><tr><td>CAS to RAS (tRCDmin)</td><td>Info only</td><td>Memory Timing</td></tr><tr><td>Row Precharge (tRPmin)</td><td>Info only</td><td>Memory Timing</td></tr><tr><td>Active to Precharge (tRASmin)</td><td>Info only</td><td>Memory Timing</td></tr></table>

# 3.5 Boot

# 3.5.1 Boot Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Boot Configuration</td><td colspan="2">Info only</td></tr><tr><td>Setup Prompt Timeout</td><td>6</td><td>Number of seconds to wait for setup activation key. 65535 (0xFFFF) means indefinite waiting.</td></tr><tr><td>Bootup NumLock State</td><td>On Off</td><td>Select the keyboard NumLock state.</td></tr><tr><td>Quiet Boot</td><td>Disabled Enabled</td><td>Enable or disables Quiet Boot option.</td></tr><tr><td>Fast Boot</td><td>Disabled Enabled</td><td>Enables or disables boot with initialization of a minimal set of devices required to launch active boot option. Has no effect on BBS boot options.</td></tr><tr><td>New Boot Option Policy</td><td>Default Place First Place Last</td><td>Controls the placement of newly detected UEFI boot options</td></tr><tr><td>CSM16 Configuration</td><td>Submenu</td><td>CSM16 configuration: Enable/Disable, Option ROM execution settings, etc.</td></tr><tr><td>CSM Configuration</td><td>Submenu</td><td>CSM configuration: Enable/Disable, Option ROM execution settings, etc.</td></tr></table>

Boot Configuration > CSM16 Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>CSM16 Module Version</td><td colspan="2">Info only</td></tr><tr><td>GateA20 Active</td><td>Upon Request Always</td><td>UPON REQUEST - GA20 can be disabled using BIOS services. ALWAYS - do not allow disabling GA20; this option is useful when any RT code is executed above 1MB.</td></tr><tr><td>Option ROM Messages</td><td>Force BIOS Keep Current</td><td>Set display mode for Option ROM.</td></tr><tr><td>INT19 Trap Response</td><td>Immediate Postponed</td><td>BIOS reaction on INT19 trapping by Option ROM: IMMEDIATE - execute the trap right away; POSTPONED - execute the trap during legacy boot.</td></tr></table>

Boot Configuration > CSM Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Launch CSM</td><td>EnabledDisable</td><td>Enable/Disable CSM Support.</td></tr><tr><td>Boot option filter</td><td>UEFI and LegacyLegacy onlyUEFI only</td><td>This option controls Legacy/UEFI ROMs priority.</td></tr><tr><td>Launch PXE OpROM policy</td><td>Do not launchUEFI onlyLegacy only</td><td>Controls the execution of UEFI and Legacy PXE OpROM</td></tr><tr><td>Launch Storage OpROM policy</td><td>Do not launchUEFI onlyLegacy only</td><td>Controls the execution of UEFI and Storage PXE OpROM</td></tr><tr><td>Launch Video OpROM policy</td><td>Do not launchUEFI onlyLegacy only</td><td>Controls the execution of UEFI and Video PXE OpROM</td></tr><tr><td>Other PCI device</td><td>Do not launchUEFI onlyLegacy only</td><td>Determines OpROM execution policy for devices other than Network, Storage, or Video.</td></tr></table>

# 3.6 Security

3.6.1 Password Description

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Administrator Password</td><td>Enter password</td><td></td></tr><tr><td>User Password</td><td>Enter password</td><td></td></tr></table>

3.6.2 Save & Exit

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Save Changes and Exit</td><td>Yes No</td><td>Exit system setup after saving the changes.</td></tr><tr><td>Discard Changes and Exit</td><td>Yes No</td><td>Exit system setup without saving any changes.</td></tr><tr><td>Save Changes and Reset</td><td>Yes No</td><td>Reset the system after saving the changes.</td></tr><tr><td>Discard Changes and Reset</td><td>Yes No</td><td>Reset system setup without saving any changes.</td></tr><tr><td>Save Changes</td><td>Yes No</td><td>Save Changes done so far to any of the setup options.</td></tr><tr><td>Discard Changes</td><td>Yes No</td><td>Discard Changes done so far to any of the setup options.</td></tr><tr><td>Default Options</td><td colspan="2">Info only</td></tr><tr><td>Restore Defaults</td><td>Yes No</td><td>Restore/Load Default values for all the setup options.</td></tr><tr><td>Save as User Defaults</td><td>Yes No</td><td>Save the changes done so far as User Defaults.</td></tr><tr><td>Restore User Defaults</td><td>Yes No</td><td>Restore the User Defaults to all the setup options.</td></tr><tr><td>Boot Override</td><td colspan="2">Info only</td></tr></table>

# Safety Instructions

For user safety, please read and follow all instructions, WARNINGS, CAUTIONS, and NOTES marked in this manual and on the associated equipment before handling/operating the equipment.

1. Read these safety instructions carefully.
2. Keep this user's manual for future reference.
3. Read the specifications section of this manual for detailed information on the operating environment of this equipment.

4. When installing/mounting or uninstalling/removing equipment:

Z Turn off power and unplug any power cords/cables.
Z To avoid electrical shock and/or damage to equipment:
Z Keep equipment away from high heat or high humidity;
Z Make sure to use recommended voltage and power source settings;
Z Always install and operate equipment near an easily accessible electrical socket-outlet;
Z Secure the power cord (do not place any object on/over the power cord);
Z Only install/attach and operate equipment on stable surfaces and/or recommended mountings;
Z If the equipment will not be used for long periods of time, turn off and unplug the equipment from its power source.

5. Never attempt to fix the equipment. Equipment should only be serviced by qualified personnel.

6. A Lithium-type battery may be provided for uninterrupted, backup or emergency power.

7. CAUTION! Risk of explosion if battery is replaced with one of an incorrect type. Please dispose of used batteries appropriately.

8. Equipment must be serviced by authorized technicians when:

Z The power cord or plug is damaged;
Z Liquid has penetrated the equipment;
Z It has been exposed to high humidity/moisture;
Z It is not functioning or does not function according to the user’s manual;
Z It has been dropped and/or damaged; and/or,
Z It has an obvious sign of breakage.

Please pay strict attention to all warnings and advisories appearing on the device, to avoid injury or damage.

The equipment may have more than one power supply input. To reduce the risk of electrical shock, trained personnel should disconnect all power supply inputs before servicing.

CAUTION! Disconnect all power supply inputs before servicing.

This page intentionally left blank.

# Getting Service

Ask an Expert: http://askanexpert.adlinktech.com

# ADLINK Technology, Inc.

9F, No.166 Jian Yi Road, Zhonghe District

New Taipei City 235, Taiwan

Tel: +886-2-8226-5877

Fax: +886-2-8226-5717

Email: service@adlinktech.com

# Ampro ADLINK Technology, Inc.

5215 Hellyer Avenue, #110

San Jose, CA 95138, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

+1-408-360-0222

Email: info@adlinktech.com

# ADLINK Technology (China) Co., Ltd.

300 Fang Chun Rd., Zhangjiang Hi-Tech Park

Pudong New Area, Shanghai, 201203 China

Tel: +86-21-5132-8988

Fax: +86-21-5132-3588

Email: market@adlinktech.com

# ADLINK Technology GmbH

Hans-Thoma-Strasse 11

D-68163 Mannheim, Germany

Tel: +49-621-43214-0

Fax: +49-621 43214-30

Email: emea@adlinktech.com

Please visit the Contact page at www.adlinktech.com for information on how to contact the ADLINK regional office nearest you.
[🔗 Link to the original document](.hperc-ibr-m-50-1z178-1000-100-pm-en/hperc-ibr-m-50-1z178-1000-100-pm-en.pdf)