# IAP-M47-4U

# User’s Manual

4U Rack Mounted ATX MB IPC with

$1 2 ^ { \mathsf { t h } } / 1 3 ^ { \mathsf { t h } } / 1 4 ^ { \mathsf { t h } }$ Gen Intel® CPU Socket (LGA 1700)

![Front view of a black server rack with ports, ventilation grilles, and a front panel showing internal components (no visible text or labels)](.iap-m47-4u-50m-12900-1000-01-240625/bbbb9b19dc8dbc9ee47239be5758ab1278f482323d8083c448c88e448b088469.jpg)

Manual Rev.: 0.1 Preliminary

Revision Date: June 25, 2024

Part Number: 50M-12900-1000

# Preface

# Copyright

Copyright © 2024 ADLINK Technology, Inc. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

# Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

# Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.

![Symbol of a trash bin crossed with a diagonal line and a horizontal bar below (no text or labels)](.iap-m47-4u-50m-12900-1000-01-240625/971e64d58d999fb6be2569fd8aa086580fbb5c54af0451ef756998d813e5378f.jpg)

Battery Labels (for products with battery)

![Simple line drawing of a trash bin with two crossed lines (no text or symbols)](.iap-m47-4u-50m-12900-1000-01-240625/82de0d9e417aa5296232443bc6775f379dcdec98047cfd4ce43904db50e0fcdc.jpg)

![The image displays a black-outlined square with rounded corners containing a standard recycling symbol composed of three arrows chasing each other in a triangular loop. Directly below the square, the text 'Li-ion' is printed in a bold, black, sans-serif font.](.iap-m47-4u-50m-12900-1000-01-240625/b173bc4a541dc79aa749aefb664c7a06cbe0aee0cc128ac4e3fd36421a1e45ed.jpg)

![RECYCLE\nRBRC\nLi-ion\n7.800.822.8837](.iap-m47-4u-50m-12900-1000-01-240625/1de171e570627bacbc58bc8da12c3ac1c300f7a50b540c34c0647bef9d2d85e3.jpg)

![廢電池請回收](.iap-m47-4u-50m-12900-1000-01-240625/406b2a80eb617b0dc9734642283a286966595603720bfa35e3fa214b72070b3f.jpg)

# California Proposition 65 Warning

![The image displays a standard warning sign consisting of a yellow equilateral triangle with a thick black border. Centered inside the triangle is a large, black exclamation mark. The background surrounding the triangle is white.](.iap-m47-4u-50m-12900-1000-01-240625/c0c71e5ac6a2f6b35bb2fe5c0c16b6db8b9c64ea578c86c22fbaaab357941834.jpg)

WARNING: This product can expose you to chemicals including acrylamide, arsenic, benzene, cadmium, Tris(1,3-dichloro-2-propyl)phosphate (TDCPP), 1,4-Dioxane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and vinyl materials, which are known to the State of California to cause cancer, and acrylamide, benzene, cadmium, lead, mercury, phthalates, toluene, DEHP, DIDP, DnHP,

DBP, BBP, PVC, and vinyl materials, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

# Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

Revision History

<table><tr><td>Revision</td><td>Description</td><td>Date</td><td>By</td></tr><tr><td>0.1</td><td>Preliminary release</td><td>2024-06-25</td><td>AL</td></tr></table>

# Table of Contents

# Preface ....

# Table of Contents...

# List of Figures ....... .iv

# 1 Introduction...

1.1 Packing List... .5
1.2 Optional Accessories.. .5
1.3 Features.. .6

# 2 Specifications ...

2.1 Core System .
2.2 I/O Interface
2.3 Graphics.. .8
2.4 Audio.. 8
2.5 LAN.. .8
2.6 Environmental . .8
2.7 Certification .. .8
2.8 Form Factor.. .8
2.9 Operating Systems.. .8
2.10 Functional Block Diagram.. 9

# 3 Connectors and Jumpers .. .11

3.1 Rear IO Connectors . ..11
3.2 Onboard Headers / Connectors.. .13
3.3 Jumper and Switch Settings . ..19
3.4 Expansion Slots . .21

# 4 BIOS Setup........... .25

4.1 Menu Structure.. ..25
4.2 Main Menu . ..26
4.3 Advanced Menu . ..27
4.4 Thunderbolt (TM) Configuration.. ..40
4.5 Hardware Health Environment Monitoring Screen. ..41
4.6 Security Screen.. ..42
4.7 Boot Screen . ..45
4.8 Exit Screen.. ..47

# Safety Instructions......... ..49

# Getting Service.... .50

# List of Figures

Figure 1: Functional Block Diagram . .9

# 1 Introduction

The ADLINK’s IAP-M47-4U IPC system is an industrial motherboard supporting 12th/13th/14th Generation Intel® Core™ i9/i7/i5/i3 desktop processors with an Intel® Q670 Chipset, and provides 7 PCIe expansion slots for a costcompetitive embedded computing solution. It includes high-speed data transfer interfaces such as PCIe 5.0, USB 3.2 Gen2, and SATA 6 GB/s (SATA III), along with dual-channel DDR5 4800/5600 MHz RAM for industrial automation applications.

With an industrial-grade I/O port design, the IMB-M47 offers a significant competitive advantage for embedded computing applications in terms of device compatibility, durable connectivity, and extreme environment readiness.

<table><tr><td>Model Number</td><td>Chipset</td></tr><tr><td>IAP-M47-4U</td><td>Q670</td></tr></table>

Latest revisions of the datasheet, user’s manual, BIOS, drivers, and board support packages, can be downloaded from the product webpage on the ADLINK web site: www.adlinktech.com

# 1.1 Packing List

IMB-M47-4U IPC system

Rear I/O shield

# 1.2 Optional Accessories

• 2-port USB 2.0 cable with bracket (Part Number: 30-25010-3010)
• 2-port USB 3.0 cable with bracket (Part Number: 30-25046-0100)
• 1-port LPT cable with bracket (Part Number: 30-25019-2000)
• 2-port COM cable with bracket (Part Number: 30-25116-0000-A0)

1.3 Features

<table><tr><td>Dimension</td><td>427 mm (W) x 177 mm (H) x 447.9 mm(D)</td></tr><tr><td>CPU</td><td>Intel® CoreTM i9-12900E Processor</td></tr><tr><td>Motherboard</td><td>ALDINK IMB-M47</td></tr><tr><td>DRAM</td><td>128GB DDR5 4800MHz DIMM Non-ECC</td></tr><tr><td>Storage</td><td>128GB MLC SATA SSD</td></tr><tr><td>Display</td><td>1* DP++ connector (rear I/O)1* HDMI connector (rear I/O)1* VGA connector (rear I/O)</td></tr><tr><td>COM</td><td>2* RS-232/422/485 (rear I/O)4* RS-232 pin headers</td></tr><tr><td>USB</td><td>5* USB 3.2 Gen2, 1x USB 3.2 Gen2x2 (Connector type: Type C)2* USB 3.1 via header, 2x USB 2.0 via header, 2x vertical USB 2.0 connectors</td></tr><tr><td>Ethernet</td><td>3* 2.5GbE (rear)</td></tr><tr><td>Expansion Slot</td><td>2x PCIe x16 slots (Gen5, single x16 card in PCIE1,or two x8 cards in PCIE 1 and PCIE4,PCIE1 supports riser card x8/x8)2x PCIe x4 (Gen4)3x PCIe x1 (Gen3)</td></tr><tr><td>Audio</td><td>High-Definition Audio. Line-in, Line-out, and Mic-in</td></tr><tr><td>Button</td><td>Power button, reset button</td></tr><tr><td>LED Indicator</td><td>Power LED, storage LED</td></tr><tr><td>PSU</td><td>Built in 1200W ATX</td></tr></table>

# 2 Specifications

# 2.1 Core System

<table><tr><td>CPU</td><td>Intel® 13th Gen (Raptor Lake-S) and 12th Gen (Alder Lake-S) CoreTM processors, up to 125W</td></tr><tr><td>Chipset</td><td>Intel® Q670 Express Chipset</td></tr><tr><td>Memory</td><td>4x 288-pin DDR5 NON ECC socket, dual-channel DDR5 4800/5600 MHz, up to 128 GB (based on CPU)</td></tr><tr><td>Embedded BIOS</td><td>AMI SPI 256 Mbit</td></tr><tr><td>Hardware Monitor</td><td>CPU voltage• +3.3V voltage• +5V voltage• +12V voltage• CPU temperature• System temperature• CPU fan speed• System fan speed</td></tr></table>

# 2.2 I/O Interface

<table><tr><td>Expansion Slot</td><td>1x PCIe x16 Gen51x PCIe x8 Gen52x PCIe x4 Gen43x PCIe x1 Gen3</td></tr><tr><td>SATA</td><td>8x SATA 6.0 Gb/s connectors, Intel® software RAID 0/1/5/10 support</td></tr><tr><td>USB</td><td>1x USB 3.2 Gen2 type C connector (rear)5x USB 3.2 Gen2 connectors (rear)2x USB 3.1 via pin headers2x USB 2.0 via pin headers2x USB 2.0 vertical connectors</td></tr><tr><td>COM</td><td>2x RS-232/422/485 (rear), 4x RS-232 pin headers</td></tr><tr><td>Parallel Port</td><td>1x LPT pin header</td></tr><tr><td>PS/2 Combo Port</td><td>1x PS/2 keyboard/mouse pin header</td></tr><tr><td>DIO</td><td>8x GPI, 8x GPO (shared with LPT header)</td></tr><tr><td>TPM</td><td>TPM 2.0 onboard IC</td></tr><tr><td>M.2 Connectors</td><td>1x M.2 (Key E, 2230) with PCIe x1, USB 2.0 and CNVi for Wireless1x M.2 (Key B, 3042/3052) with PCIe x1, USB 3.2 Gen1, USB 2.0 and SIM1x M.2 (Key M, 2242/2260/2280/25110) with PCIe x4 Gen4</td></tr></table>

# 2.3 Graphics

<table><tr><td>Interfaces</td><td>1x VGA connector (rear I/O), resolution up to 1920 x 1200@60Hz1x HDMI connector (rear I/O), resolution up to 4096 x 2160@60Hz1x DP++ connector (rear I/O), resolution up to 4096 x 2160@60Hz</td></tr></table>

# 2.4 Audio

<table><tr><td>Audio Codec</td><td>Realtek ALC897</td></tr><tr><td>Interfaces</td><td>1High Definition Audio. 1x Mic-in, 1x Line-in, and 1x Line-out connectors (rear)</td></tr></table>

# 2.5 LAN

<table><tr><td>LAN</td><td>LAN1: Intel® I226-V via RJ45 connector, with 10/100/1000/2500 MbpsLAN2: Intel® I226-LM via RJ45 connector, with 10/100/1000/2500 Mbps, vPro supportLAN3: Intel® I226-V via RJ45 connector, with 10/100/1000/2500 Mbps</td></tr></table>

# 2.6 Environmental

<table><tr><td rowspan="2">Temperature</td><td>Operating Temperature</td><td>0 - 40°C (32 - 104°F)</td></tr><tr><td>Storage (Non-Operating) Temperature</td><td>-20°C - 60°C (-4°F - 140°F)</td></tr><tr><td rowspan="2">Humidity</td><td>Operating Humidity</td><td>10% - 85% (non-condensing)</td></tr><tr><td>Storage (Non-Operating) Humidity</td><td>10% - 95% (non-condensing)</td></tr></table>

# 2.7 Certification

<table><tr><td>EMC</td><td>CE/FCC Class BEN55032/EN55035 complianceEN61000-6-4/EN61000-6-2 compliance</td></tr><tr><td>Safety</td><td>UL</td></tr></table>

# 2.8 Form Factor

<table><tr><td>System</td><td>427 mm (W) x 177 mm (H) x 447.9 mm(D)</td></tr></table>

# 2.9 Operating Systems

<table><tr><td>Standard Support</td><td>Microsoft® Windows® 10, 64-bitMicrosoft® Windows® 11, 64-bitLinux</td></tr></table>

# 2.10 Functional Block Diagram

![The flowchart depicts the connectivity of an Intel Alder Lake-S/Raptor Lake-S processor system.\n\n**Top Section (Processor and Memory/Expansion):**\n*   **Central Block:** 'Intel Alder Lake-S & Raptor Lake-S Processor LGA-1700'\n    *   **Left Connections:**\n        *   'HDMI Connector' connects via 'HDMI' to 'ITE IT66318', which connects via 'DDI' to the Processor.\n        *   'Display port Connector' connects via 'DDI' to the Processor.\n        *   'VGA Connector' connects via 'VGA' to 'Realtek RTD2168', which connects via 'DDI' to the Processor.\n    *   **Right Connections:**\n        *   Connects via 'Channel A DDR5 4800MHz' to 'U-DIMM (A1/A2)'.\n        *   Connects via 'Channel B DDR5 4800MHz' to 'U-DIMM (B1/B2)'.\n        *   Connects via 'PCIe Gen5 (0-15)' to 'PCIe x16 or x8/x8 Slot'.\n        *   Connects via 'PCIe Gen4 (0-3)' to 'M.2 Key M1'.\n    *   **Down Connection:** Connects via 'DMI' to the 'Intel PCH Q670' block below.\n\n**Middle Section (Platform Controller Hub - PCH):**\n*   **Central Block:** 'Intel PCH Q670'\n    *   **Left Connections:**\n        *   Connects via '3x PCIe x1' to '3 x PCIe x1 Slot'.\n        *   Connects via '2x PCIe x4' to '2 x PCIe x4 Slot'.\n        *   Connects via '2xUSB3.2 Gen2' to 'USB REDRIVER PI3EQX1004B1ZHEX 2x USB2.0', which connects via '2xUSB3.2 Gen2' to '2x USB3.2 Gen2 Connector'.\n        *   Connects via '2x USB3.2 Gen2' to 'USB REDRIVER PI3EQX1004B1ZHEX 2x USB2.0', which connects via '2x USB3.2 Gen2' to '2x USB3.2 Gen2 Header'.\n        *   Connects via '1x USB3.2 Gen1 1x USB2.0' to 'USB REDRIVER PI3EQX1004B1ZHEX', which connects via '1x USB3.2 Gen1 1x USB2.0' to '1x USB3.2 Gen2'.\n        *   Connects via '1x USB3.2 Gen2x2 1x USB2.0' to 'USB REDRIVER PI3EQX2004ZHEX', which connects via '1x USB3.2 Gen2x2 1x USB2.0' to '1x USBC'.\n        *   Connects via 'PCIe x1' to 'Intel I226V', which connects via 'MDI 2.5G' to 'RJ45 Connector'.\n        *   Connects via 'PCIe x1' to 'Intel I226LM', which connects via 'MDI 2.5G' to 'RJ45 Connector (vPRO)'.\n        *   Connects via 'PCIe x1' to 'Intel I226V', which connects via 'MDI 2.5G' to 'RJ45 Connector'.\n        *   Connects via '2x USB3.2 Gen1 2x USB2.0' to '2x USB3.2 Gen1 Connector'.\n        *   Connects via '2x USB2.0' to '2x USB2.0 Header'.\n        *   Connects via '2x USB2.0' to '2x USB2.0 TypeA vertical'.\n        *   Connects via 'HDA' to 'Realtek ALC897'.\n    *   **Right Connections:**\n        *   Connects via 'SATA x8' to 'SATA Port x8'.\n        *   Connects via 'PCIe x1 CNVi USB2.0' to 'M.2 Key E'.\n        *   Connects via 'PCIe x1 USB3.2 Gen1 USB2.0' to 'M.2 Key B', which connects via 'SIM' to 'SIM Card'.\n        *   Connects via 'SPI' to 'BIOS'.\n        *   Connects via 'SMBUS' to 'NUVOTON NUC121ZC2AE'.\n\n**Bottom Section (Audio and Super I/O):**\n*   **Audio Block:** 'Realtek ALC897' (connected to PCH via 'HDA')\n    *   Connects via 'HDA' to 'Line In/Line Out Mic In SPDIF Front Audio'.\n    *   Connects via 'GPIO x4' to 'FINTEK F81966'.\n*   **Super I/O Block:** 'FINTEK F81966' (connected to PCH via a vertical arrow)\n    *   Connects via 'LPT/GPIO' to 'LPT/DGIO header'.\n    *   Connects via 'UART x2' to 'COM Port x2 RS232/422/482'.\n    *   Connects via 'UART x4' to 'COM Port x4 RS232 only'.\n    *   Connects via 'FAN' to 'CPU FAN x1 CHA FAN x1'.\n    *   Connects via 'PS/2 KB, MS' to 'PS/2 Combo Wafer'.\n*   **Nuvoton Connection:** 'NUVOTON NUC121ZC2AE' connects to 'CHA FAN x2'.](.iap-m47-4u-50m-12900-1000-01-240625/4f96ee2e7564b0dc83bd5230e261b0f14c853083f126a40c57a47b50b722cf80.jpg)

Figure 1: Functional Block Diagram

This page intentionally left blank.

# 3 Connectors and Jumpers

# 3.1 Rear IO Connectors

# 3.1.1 DisplayPort

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>CN_DDPx0+</td><td>2</td><td>GND</td></tr><tr><td>3</td><td>CN_DDPx0-</td><td>4</td><td>CN_DDPx1+</td></tr><tr><td>5</td><td>GND</td><td>6</td><td>CN_DDPx1-</td></tr><tr><td>7</td><td>CN_DDPx2+</td><td>8</td><td>GND</td></tr><tr><td>9</td><td>CN_DDPx2-</td><td>10</td><td>CN_DDPx3+</td></tr><tr><td>11</td><td>GND</td><td>12</td><td>CN_DDPx3-</td></tr><tr><td>13</td><td>CN_DDPx_AUX_SEL</td><td>14</td><td>CN_DDPx_CONFIG2</td></tr><tr><td>15</td><td>CN_DDPx_AUX+</td><td>16</td><td>GND</td></tr><tr><td>17</td><td>CN_DDPx_AUX-</td><td>18</td><td>CN_DDPx_HPD</td></tr><tr><td>19</td><td>GND</td><td>20</td><td>+V3.3_DDPx_PWR_CN</td></tr></table>

![This image is a technical line drawing of a rectangular connector housing, featuring rounded corners and a small notch on the left side. Inside the housing are two parallel rows of ten rectangular pin slots. Specific pins are labeled with numbers:\n\n*   **19** is positioned above the top-left pin slot.\n*   **1** is positioned above the top-right pin slot.\n*   **20** is positioned below the bottom-left pin slot.\n*   **2** is positioned above the bottom-right pin slot.\n\nAdditionally, there are two small rectangular cutouts visible along the bottom edge of the inner housing.](.iap-m47-4u-50m-12900-1000-01-240625/51226de2b76e7f53cb12e76023eb4dd8492f6f3034f586b1db8525e23d402b50.jpg)

# 3.1.2 HDMI

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>HDMI1_CON_DP2</td><td>2</td><td>GND</td></tr><tr><td>3</td><td>HDMI1_CON_DN2</td><td>4</td><td>HDMI1_CON_DP1</td></tr><tr><td>5</td><td>GND</td><td>6</td><td>HDMI1_CON_DN1</td></tr><tr><td>7</td><td>HDMI1_CON_DP0</td><td>8</td><td>GND</td></tr><tr><td>9</td><td>HDMI1_CON_DN0</td><td>10</td><td>HDMI1_CON_CKP</td></tr><tr><td>11</td><td>GND</td><td>12</td><td>HDMI1_CON_CKN</td></tr><tr><td>13</td><td>NC</td><td>14</td><td>NC</td></tr><tr><td>15</td><td>HDMI1_DDC_CLK</td><td>16</td><td>HDMI1_DDC_DATA</td></tr><tr><td>17</td><td>GND</td><td>18</td><td>+5V_HDMI</td></tr><tr><td>19</td><td>HDMI1_CON_HPD</td><td colspan="2"></td></tr></table>

![The image is a black-and-white line drawing of a rectangular connector housing with a notch on the left side. Inside, there are two rows of pins. Numbers label specific pins:\n\n**Top Row (from left to right):**\n19\n17\n3\n1\n\n**Bottom Row (from left to right):**\n18\n4\n2](.iap-m47-4u-50m-12900-1000-01-240625/3c84783c8fe7c8f2a36fb2c56dd9bec00197adeab98eadaab848cce929a7051a.jpg)

# 3.1.3 VGA Connector

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>VGA_CON_RED</td><td>2</td><td>VGA_CON_GREEN</td></tr><tr><td>3</td><td>VGA_CON_BLUE</td><td>4</td><td>NC</td></tr><tr><td>5</td><td>GND</td><td>6</td><td>GND</td></tr><tr><td>7</td><td>GND</td><td>8</td><td>GND</td></tr><tr><td>9</td><td>+5V_HDMI</td><td>10</td><td>GND</td></tr><tr><td>11</td><td>NC</td><td>12</td><td>VGA_DDCDAT</td></tr><tr><td>13</td><td>VGA_CON_HS</td><td>14</td><td>VGA_CON_VS</td></tr><tr><td>15</td><td>VGA_DDCCLK</td><td></td><td></td></tr></table>

![This is a technical line drawing of a 15-pin D-sub connector.\n\n*   **Central Component:** A rectangular shape with rounded corners sits in the center, containing a grid of 15 circular dots arranged in three rows and five columns.\n*   **Mounting Points:** Flanking the central grid on the far left and right are two hexagonal outlines, representing screw holes or mounting points.\n*   **Labels:** The number **5** is positioned above the leftmost column of pins, and the number **1** is positioned above the rightmost column.](.iap-m47-4u-50m-12900-1000-01-240625/c15f328ec736db066317a70bd1117fcacef812ab92b50c8226106114dcb11b9d.jpg)

# 3.1.4 COM 1-2 Connectors

COM1 and COM2 ports (RS232/422/485) can be adjusted in BIOS setup utility > Advanced Screen > Super IO Configuration

<table><tr><td rowspan="2">Pin</td><td colspan="3">Signal</td></tr><tr><td>RS-232</td><td>RS-422</td><td>RS-485</td></tr><tr><td>1</td><td>DCD#</td><td>Tx-</td><td>Tx/Rx-</td></tr><tr><td>2</td><td>RxD</td><td>Tx+</td><td>Tx/Rx+</td></tr><tr><td>3</td><td>TxD</td><td>Rx+</td><td>N/A</td></tr><tr><td>4</td><td>DTR#</td><td>Rx-</td><td>N/A</td></tr><tr><td>5</td><td>GND</td><td>GND</td><td>GND</td></tr><tr><td>6</td><td>DSR#</td><td>N/A</td><td>N/A</td></tr><tr><td>7</td><td>RTS#</td><td>N/A</td><td>N/A</td></tr><tr><td>8</td><td>CTS#</td><td>N/A</td><td>N/A</td></tr><tr><td>9</td><td>No Power / 5V / 12V</td><td>N/A</td><td>N/A</td></tr></table>

![The image shows a technical schematic symbol enclosed in a rectangular border. On the left and right sides, flanking a central oval shape, are two hexagonal shapes with a central circle, representing mounting screws. Inside the central oval, there are nine small circles arranged in two rows: a top row of four circles and a bottom row of five circles. The numbers '1', '5', '6', and '9' are placed at the corners of this pin arrangement: '1' is above the top-left circle, '5' is above the top-right circle, '6' is below the bottom-left circle, and '9' is below the bottom-right circle.](.iap-m47-4u-50m-12900-1000-01-240625/31a62a3deb6c80a7566b39c115e7a0e79af3ca8aadd0c31a781a1bac71baeb37.jpg)

# 3.1.5 Etrhernet Connectors (LAN1, LAN2, LAN3)

Three 10/100/1000/2500 Mbps LAN Ethernet controllers based on Intel® i226LM, support PXE and WOL. LAN2 supports vPro.

<table><tr><td>Pin</td><td>10BASE-T/100BASE-TX</td><td>1000BASE-T</td></tr><tr><td>1</td><td>TX+</td><td>LAN_MDIO+</td></tr><tr><td>2</td><td>TX-</td><td>LAN_MDIO-</td></tr><tr><td>3</td><td>RX+</td><td>LAN_MDI1+</td></tr><tr><td>4</td><td>--</td><td>LAN_MDI2+</td></tr><tr><td>5</td><td>--</td><td>LAN_MDI2-</td></tr><tr><td>6</td><td>RX-</td><td>LAN_MDI1-</td></tr><tr><td>7</td><td>--</td><td>LAN_MDI3+</td></tr></table>

![The image displays a line drawing of an RJ45 connector. The text 'LED1' and 'LED2' appears at the top, while the numbers '8' and '1' are labeled at the bottom.](.iap-m47-4u-50m-12900-1000-01-240625/6a845249600cbac35614a27395cf65474a5d09a961f291826f42e1c73db4872e.jpg)

<table><tr><td>Pin</td><td>10BASE-T/100BASE-TX</td><td>1000BASE-T</td></tr><tr><td>8</td><td>--</td><td>LAN_MDI3-</td></tr></table>

<table><tr><td colspan="2">LED1 (Speed)</td><td colspan="2">LED2 (Link/Activity)</td></tr><tr><td>Status</td><td>Description</td><td>Status</td><td>Description</td></tr><tr><td></td><td>10/100 Mbps connection</td><td>Off</td><td>No Link</td></tr><tr><td>Orange</td><td>1 Gbps connection</td><td>On</td><td>Linked</td></tr><tr><td>Green</td><td>2.5 Gbps connection</td><td>Blinking</td><td>Data Activity</td></tr></table>

# 3.2 Onboard Headers / Connectors

# 3.2.1 PS/2 Keyboard/Mouse Header

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>KBCLK</td><td>3</td><td>KBDATA</td><td>5</td><td>MSDATA</td><td>7</td><td>MSCLK</td></tr><tr><td>2</td><td>+5V</td><td>4</td><td>+5V</td><td>6</td><td>GND</td><td>8</td><td>GND</td></tr></table>

1

![A black and white line drawing of a rectangular battery icon. Inside the outline, there are two rows of four indicators. The top-left indicator is a square, while the other seven indicators are circles.](.iap-m47-4u-50m-12900-1000-01-240625/07c2387046a5b58ecc1df1d1438ae2cc2c17d8ae4501cada79df4e9ca56d284a.jpg)

# 3.2.2 LAN LED Header

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>LILEDP</td><td>2</td><td>LED_LNK#_ACT</td><td>3</td><td>LED_1000#</td><td>4</td><td>LED_2500#</td></tr></table>

1

![The image displays a simple black-and-white diagram featuring a horizontal row of four identical rings. Each ring consists of a large outer circle and a smaller concentric inner circle, creating an annular shape. These four rings are enclosed within a thin rectangular border that runs along the top and bottom edges. There is no text present in the image.](.iap-m47-4u-50m-12900-1000-01-240625/f830d91666b660c231dbd2d5bab35469d5fb1108d4121577b11ece3246967f02.jpg)

# 3.2.3 ATX12V Power Connectors

This motherboard provides an 8-pin ATX 12V power connector. To use a 4-pin ATX power supply, please plug italong Pin 1 and Pin 5.

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>8</td><td>ATX12V</td><td>7</td><td>ATX12V</td><td>6</td><td>ATX12V</td><td>5</td><td>ATX12V</td></tr><tr><td>4</td><td>GND</td><td>3</td><td>GND</td><td>2</td><td>GND</td><td>1</td><td>GND</td></tr></table>

8

![The image is a black and white line drawing of a rectangular object. It features a main body divided into a 2x4 grid of eight smaller squares. Above the grid, there is a single, wider rectangular shape centered at the top.](.iap-m47-4u-50m-12900-1000-01-240625/fc3b1d043560d0b253222b0c24ddb3c5a74de313a686b414a398fad22da4630a.jpg)

4

1

# 3.2.4 CPU Fan Connectors (+12V)

Please connect the CPU fan cable to the connector and match the black wire to the ground pin.

![+12V\nCPU_FAN_SPEED\nGND\nFAN_SPEED_CONTROL\n1](.iap-m47-4u-50m-12900-1000-01-240625/1997fc35df3fecae35fa8cb93ca0408d7d7b34afccaad6f0ddb07ce3f0198c17.jpg)

# 3.2.5 Chassis Fan Connectors(+12)

![GND\n+12V\nCHA_FAN_SPEED\nFAN_SPEED_CONTROL\n1](.iap-m47-4u-50m-12900-1000-01-240625/271a084cf5e4c8a65c78ee4845d9518c3cef2f49f96c43724e1cb5941562112e.jpg)

# 3.2.6 USB 2.0 Connectors

There are two USB 2.0 Type-A vertical connectors on this motherboard.

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>4</td><td>GND</td></tr><tr><td>3</td><td>USB_D+</td></tr><tr><td>2</td><td>USB_D-</td></tr><tr><td>1</td><td>USB_PWR</td></tr></table>

![The image displays a white rectangle with rounded corners containing a thick black vertical bar in the center. To the right of the top of the rectangle is the number '4'. Below the rectangle and to the right is the number '1'.](.iap-m47-4u-50m-12900-1000-01-240625/231d39fc34afd0b49537464d586d1b83b778142720cb5dc28f4b38b9aeb1b697.jpg)

# 3.2.7 PSU\_SMB1

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>SMB_CLK</td></tr><tr><td>2</td><td>SMB_DATA</td></tr><tr><td>3</td><td>SMBALERT#</td></tr><tr><td>4</td><td>GND</td></tr><tr><td>5</td><td>+3V</td></tr></table>

![The image displays a black-and-white line drawing featuring a vertical rectangle with a smaller rectangular section protruding from the upper left side. Inside the main rectangle, four small black squares are arranged in a vertical column. To the right of the top corner, the number '1' is visible.](.iap-m47-4u-50m-12900-1000-01-240625/73df4297c0d52c5e216ae8e94cd8db15a72c850231e8ac01a0dfdb0be13aa50f.jpg)

# 3.2.8 24-Pin ATX Power Input Connector

This motherboard provides a 24-pin ATX power connector. To use a 20-pin ATX power supply, plug it along Pin 1and Pin 13.

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>12</td><td>+3V</td><td>24</td><td>GND</td></tr><tr><td>11</td><td>+12V</td><td>23</td><td>+5V</td></tr><tr><td>10</td><td>+12V</td><td>22</td><td>+5V</td></tr><tr><td>9</td><td>ATX+5VSB</td><td>21</td><td>+5V</td></tr><tr><td>8</td><td>PWROK_PS</td><td>20</td><td>NA</td></tr><tr><td>7</td><td>GND</td><td>19</td><td>GND</td></tr><tr><td>6</td><td>+5V</td><td>18</td><td>GND</td></tr><tr><td>5</td><td>GND</td><td>17</td><td>GND</td></tr><tr><td>4</td><td>+5V</td><td>16</td><td>PSON#</td></tr><tr><td>3</td><td>GND</td><td>15</td><td>GND</td></tr><tr><td>2</td><td>+3V</td><td>14</td><td>-12V</td></tr><tr><td>1</td><td>+3V</td><td>13</td><td>+3V</td></tr></table>

![12\n24\n1\n13](.iap-m47-4u-50m-12900-1000-01-240625/6ccb996bad4efd110c4980d7d58639cb45fcbc63ca1525a329843fcee5b91294.jpg)

# 3.2.9 USB 3.2 Gen 1 Header

![Vbus\nVbus ○○○ IntA_P1_SSRX-\nIntA_P0_SSRX- ○○○ IntA_P1_SSRX+\nIntA_P0_SSRX+ ○○○ GND\nGND ○○○ IntA_P1_SSTX-\nIntA_P0_SSTX- ○○○ IntA_P1_SSTX+\nIntA_P0_SSTX+ ○○○ GND\nGND ○○○ IntA_P1_D-\nIntA_P0_D- ○○○ IntA_P1_D+\nIntA_P0_D+ ○○○ ID](.iap-m47-4u-50m-12900-1000-01-240625/dc784de13ac6cdd0c72322db56b7e45facd62c0726340231484eb7fc35a6f58d.jpg)

# 3.2.10 SATA3 Connectors

The Serial ATA3 (SATA3) connectors support SATA data cables for internal storage devices. The current SATA3 interface allows up to 6.0 Gb/s data transfer rate.

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>GND</td><td>5</td><td>SATA-B-</td></tr><tr><td>2</td><td>SATA-A+</td><td>6</td><td>SATA-B+</td></tr><tr><td>3</td><td>SATA-A-</td><td>7</td><td>GND</td></tr><tr><td>4</td><td>GND</td><td></td><td></td></tr></table>

![The image is a black-and-white line drawing. On the left side, there is a vertical rectangular outline. Inside this outline is a long, narrow rectangular slot. Running vertically through the center of this slot is a dashed line with small squares distributed along it. To the right of the drawing, the number '1' is positioned at the top, and the number '7' is positioned at the bottom.](.iap-m47-4u-50m-12900-1000-01-240625/2b68989c4243d7ffad6c03e407608bb1f1db1b5dec6285726824c99dcf606761.jpg)

# 3.2.11 System Panel Header

This header accommodates several system front panel functions.

![PLED+\nPLED-\nPWRBTN#\nGND\nGND\nRESET#\nGND\nHDLED-\nHLED+\n1](.iap-m47-4u-50m-12900-1000-01-240625/14edafbe34b5d86f648a112145463877b5b362ea8231604fb8838f92ffdbf474.jpg)

# 3.2.12 COM Port Header (RS232)

2x5-pin 2.54mm pitch header

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>DCD</td><td>6</td><td>DSR</td></tr><tr><td>2</td><td>RXD</td><td>7</td><td>RTS</td></tr><tr><td>3</td><td>TXD</td><td>8</td><td>CTS</td></tr><tr><td>4</td><td>DTR</td><td>9</td><td>PWR</td></tr><tr><td>5</td><td>GND</td><td></td><td></td></tr></table>

![RXD\nDTR\nDSR\nCTS\nPWR\nRTS\nGND\nTXD\nDCD](.iap-m47-4u-50m-12900-1000-01-240625/e88787b67d7094f2d62816609e8a788c801ecb1a48f1f2ec0626fceb5ea79300.jpg)

# 3.2.13 ESP1 Header (ESP1)

![ESPI_CLK\nESPI_CS#\nESPI_RST#\nESPI_IO3\n+3V\nESPI_IO0\n+3VSB\nGND\n1\nGND\nSMB_CLK_MAIN\nSMB_DATA_MAIN\nESPI_IO2\nESPI_IO1\nGND\nN/A\nESPI_ALERT#\nGND](.iap-m47-4u-50m-12900-1000-01-240625/cfb95842e08d1c21b7c5e8ab8be890d3dabe45378a8d8c70ec4ad3f70f3bf782.jpg)

# 3.2.14 Print Port/GPIO Header

For printer port function, short pin4 and pin5 on Digital Input / Output Power Select(JGPIO\_PWR1).

GPIO

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td></td><td></td><td>25</td><td>NA</td></tr><tr><td>24</td><td>GND</td><td>23</td><td>SIO_GP70/GPP_E6</td></tr><tr><td>22</td><td>GND</td><td>21</td><td>SIO_GP71/GPP_E5</td></tr><tr><td>20</td><td>GND</td><td>19</td><td>SIO_GP72/TIME_SYNC1</td></tr><tr><td>18</td><td>GND</td><td>17</td><td>SIO_GP87/TIME_SYNC0</td></tr><tr><td>16</td><td>GND</td><td>15</td><td>SIO_GP86</td></tr><tr><td>14</td><td>GND</td><td>13</td><td>SIO_GP85</td></tr><tr><td>12</td><td>JGPIOPWR</td><td>11</td><td>SIO_GP84</td></tr><tr><td>10</td><td>JGPIOPWR</td><td>9</td><td>SIO_GP83</td></tr><tr><td>8</td><td>SIO_GP73</td><td>7</td><td>SIO_GP82</td></tr><tr><td>6</td><td>SIO_GP74</td><td>5</td><td>SIO_GP81</td></tr><tr><td>4</td><td>SIO_GP75</td><td>3</td><td>SIO_GP80</td></tr><tr><td>2</td><td>SIO_GP76</td><td>1</td><td>SIO_GP77</td></tr></table>

Printer Port
![SLCT\nGND ○ ○ PE\nGND ○ ○ BUSY\nGND ○ ○ ACK#\nGND ○ ○ SPD7\nGND ○ ○ SPD6\nGND ○ ○ SPD5\nGND ○ ○ SPD4\nGND ○ ○ SPD3\nSLIN# ○ ○ SPD2\nPINIT# ○ ○ SPD1\nERROR# ○ ○ SPD0\nAFD# ○ □ STB#\n1](.iap-m47-4u-50m-12900-1000-01-240625/d3d97f8d931ba060ac67cf0bb4598996ec93fa6964ab8ced01bf293f85fbd4a4.jpg)

# 3.2.15 USB 2.0 Header

![USB PWR\nP+\nP-\nGND\nDUMMY\n1\nGND\nP+\nP-\nUSB PWR](.iap-m47-4u-50m-12900-1000-01-240625/45718fa0c5a5eba3af9b4c59e6d64b1c3ded63bc9bddafba34988ac82bb7186e.jpg)

# 3.2.16 SPDIF Header

The SPDIF headerprovides SPDIF audio output to HDMI VGA card, allowing the system to connect HDMI DigitalTV/projector/LCD devices. Connect the SPDIF connector of HDMI VGA card to this header.

![The image displays a schematic diagram of a 3-pin header or connector.\n\n-   Above the leftmost circular terminal, the text **+5V** is visible.\n-   Above the rightmost circular terminal, the text **GND** is visible.\n-   To the far left of the diagram, the number **1** is present.\n-   Centered below the terminals is the text **SPDIF OUT**.](.iap-m47-4u-50m-12900-1000-01-240625/b1d1bdcccd70a1ba43a7a8dc69fef9e848a3ac7e4089a1b9cc75ff244645cf83.jpg)

# 3.2.17 Jumper and Switch Settings

This is interface for the front panel audio cable allows convenient connection and control of audio devices.

GND

MIC\_RET

OUT\_RET

![The image displays a rectangular outline containing two rows of simple geometric shapes. The top row features three circles spaced horizontally. The bottom row features a square on the far left, followed by a sequence of four circles.](.iap-m47-4u-50m-12900-1000-01-240625/72cd3d0eae2f56608cd4038c259e1de43187564e82cb61977e075a7db2bb4d2e.jpg)

1

![OUT2_L\nJ_SENSE\nOUT2_R\nMIC2_R\nMIC2_L](.iap-m47-4u-50m-12900-1000-01-240625/74eaa438f1d079a538992011e8f107fb2838694a44f86d0a1520d1b634a97c04.jpg)

# 3.2.18 Buzzer Header

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>+5V</td></tr><tr><td>2</td><td>BUZZ_LOW</td></tr></table>

1

![The image displays a black-and-white graphic featuring two adjacent squares positioned side-by-side. Each square contains a centered circle. The square on the left has a noticeably thicker black border compared to the thinner border of the square on the right. There is a dark, solid shape in the bottom left corner and a dark band running across the very top edge.](.iap-m47-4u-50m-12900-1000-01-240625/8797f18a641e42dd39e0d18e00c4b65bd4eb47b8d5f454e4f4b451d5de692456.jpg)

# 3.2.19 LAN LED Headers

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>LILEDP</td></tr><tr><td>2</td><td>LED_LNK#_ACT</td></tr><tr><td>3</td><td>LED_1000#</td></tr><tr><td>4</td><td>LED_2500#</td></tr></table>

![The image displays the number 1 followed by a rectangular box divided into four vertical sections, each containing a circle.](.iap-m47-4u-50m-12900-1000-01-240625/7b4b24b487801336843d5a5dd0d3208be07cbd4f3aba1873012bd16bc3f353d4.jpg)

# 3.2.20 5-Pin Thunderbolt AIC Connector

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>TB_FRC_PWR</td></tr><tr><td>2</td><td>TBCIO_PLUG_EVENT_R2</td></tr><tr><td>3</td><td>SLP_S3</td></tr><tr><td>4</td><td>TBT_SLP_S5_S4#</td></tr><tr><td>5</td><td>GND</td></tr></table>

![The image displays a black-and-white line drawing of a rectangular shape resembling an electrical connector or jack. The shape features a wider rectangle at the base with a narrower rectangle centered on top. Inside the lower section, there are five small, solid black squares arranged in a horizontal row. The number '1' appears just below the bottom right corner of the drawing.](.iap-m47-4u-50m-12900-1000-01-240625/aa470636d41b73f1525977e754c67ba2905cc63559801abc6f76f470a41dd83c.jpg)

# 3.2.21 PCIe Power Connector

![N/A +12V\nGND](.iap-m47-4u-50m-12900-1000-01-240625/ae424c5b6e5b298bdb6577f3826e708a3d3dfb9409ae2ffb3de1d53433034473.jpg)

# 3.3 Jumper and Switch Settings

# 3.3.1 COM Port Pin9 PWR Setting Jumpers (#1,2,25)

3-pin PWR for COM port 1, COM port 2, and COM port 3-6

![A black and white sketch of a long, horizontal rectangle. Inside the left side is a square shape containing a smaller square, and to its right are two circles arranged in a row.](.iap-m47-4u-50m-12900-1000-01-240625/fe84e81ce65f4a4f26e12b841b18f1ecbeea6268901d5e720fc932ef49d81f13.jpg)

123

1-2: +5V

2-3:+12V

# 3.3.2 Chassis Intrusion Headers (#10, 13)

This motherboard supports CASE OPEN detection feature that detects if the chassis cover has been removed. Thisfeature requires a chassis with chassis intrusion detection design.

GND

![The image displays a black vertical rectangle containing two white circles stacked vertically. To the right of the rectangle is the number '1'.](.iap-m47-4u-50m-12900-1000-01-240625/8654b31cf3b4a10eb2aa94efeea13d78874559951c3cede8f85acefbc85f848f.jpg)

CI1:

Short: Active Case Open

Open: Normal

C12:

Short: Normal

Open: Active Case Open

# 3.3.3 PWR LOSS Header (#12)

![The image displays a schematic of a two-pin connector. On the left, a black rectangular outline contains two white circles stacked vertically. Horizontal lines extend from the right side of each circle to corresponding labels. The top label reads 'GND'. The bottom label reads 'ATX+5VSB'.](.iap-m47-4u-50m-12900-1000-01-240625/82db9d3bfdecd8198655e224543ecff669c14bcef1daa1b6027b5333885639df.jpg)

Short: Power Loss

Open: No Power Loss

# 3.3.4 ATX/AT Mode Jumper (#26)

![The image shows the number '1' followed by two rectangular boxes side-by-side, each containing a circle.](.iap-m47-4u-50m-12900-1000-01-240625/fe5c3d252bdb146156871c2168e18ce48c9638ef24447bf39c914069b8e4660f.jpg)

Short: AT Mode

Open: ATX Mode

# 3.3.5 Digital Input/Output Default Value Setting (#29)

![The image displays a horizontal rectangular outline containing four elements arranged in a row from left to right: a thick black vertical bar, a square containing a circle, and two adjacent circles.](.iap-m47-4u-50m-12900-1000-01-240625/6a1dd607bfdb9a738a225592b9cbe282bec5c1abc5cb3ce9a73b8b710c2a33ac.jpg)

123

1-2: Pull-High

2-3: Pull-Low

# 3.3.6 Digital Input/Output Power Select (#30)

![The image displays a horizontal scale consisting of five rectangular boxes, each containing a circle. Below the boxes, the number '1' is on the far left and the number '5' is on the far right.](.iap-m47-4u-50m-12900-1000-01-240625/10ccb0031c3feea528a18134d3e2e6e30efbe5835c96bafb1cfede0097b15c48.jpg)

1-2: +12V

2-3: +5V

3-4: +5V

4-5: GND

# 3.3.7 Clear CMOS Jumpers (#35)

(3-pin CLRMOS1)

![The image features the text '1_2' centered above a black rectangular box. Inside the box are three white circles arranged in a row; the first two are solid, and the third on the right has a black outline. Below the box, the word 'Default' is written in black text.](.iap-m47-4u-50m-12900-1000-01-240625/8bb7bc40b65486428cf2876d03e3d29802003a5b61a4bdbf679e4757322391e6.jpg)

![The image displays a small technical diagram. At the top, the text '2 3' is centered. Below this, there is a rectangular graphic containing three circular elements: the leftmost element is a white circle inside a square outline, while the two elements to its right are dark circles. At the bottom, the text 'Clear CMOS' is written in black.](.iap-m47-4u-50m-12900-1000-01-240625/5d3f96c1bdee3a8e9bddd430122aaa72b89d4f2603a07863d8b54becdb496645.jpg)

1-2:Normal 2-3:Clear CMOS

CLRMOS1 lets you to clear the CMOS data. To reset system parameters to default, turn off the computer and unplug the power cord. After 15 seconds, use a jumper cap to short pin2 and pin3 on CLRMOS1 for 5 seconds. Do not clear CMOS right after updating the BIOS. If you need to clear the CMOS, boot up the system, then shut it down before clearing CMOS. Note: The date, time, and user default profile will only be cleared if the CMOS battery is removed.

(2-pin CLRMOS2)

![The image displays the number '1' in white on the far left against a black background. To the right of the number are two white squares arranged horizontally. Inside each square is a centered white circle. A thick black horizontal bar runs along the bottom edge of the two squares.](.iap-m47-4u-50m-12900-1000-01-240625/0d282491bf9c5487fdafd048f2da886d66483376a4bdd48f5e295493de60f087.jpg)

CLRMOS2:

Open : Normal

Short:Auto Clear CMOS

(Power Off)

CLRMOS2 automatically clear CMOS cata when AC power is on. The data in CMOS includes system setup information, such as system password, date, time, and system setup parameters. To reset system parameters to default, turn off the computer, unplug the power cord, and use a jumper cap to short the pins on CLRMOS2.

# 3.3.8 PWR\_BAT1 (#36)

![The image displays a horizontal graphic, likely a step indicator or progress bar. On the left, the number '1' is shown in black text. To the right of the number is a black rectangular bar. Inside this bar are two white squares. Each white square has a black border and contains a centered circle. The circles appear to be white outlines or white fills within the squares.](.iap-m47-4u-50m-12900-1000-01-240625/2fe8bec1bdf7b85019c0c561dc102c42ca8558b5a07593d42930a16727288897.jpg)

Open: Normal

Short: Charge Battery

# 3.3.9 PWR\_BAT1 (#36)

![The image displays the number '1' on the left side. To its right is a diagram of a square divided into four equal quadrants. The top-left and top-right quadrants each contain a smaller square with a circle inside it. The bottom-left quadrant is a solid black square, and the bottom-right quadrant is an empty white square.](.iap-m47-4u-50m-12900-1000-01-240625/4b365042df3f1f29d153c3fbca4513d057e12ad7c0cd60f84131519e2062f568.jpg)

Open: Normal

Short: Auto Clear CMOS

(Power off)

Auto clear CMOS when the system boots improperly.

# 3.4 Expansion Slots

There are 7 PCI Express slots, 3 M.2 sockets, and 1 SIM socket on this motherboard.

PCIe and PCI slots:

<table><tr><td></td><td>Slot 1 (PCIe1)</td><td>Slot 2 (PCI2)</td><td>Slot 3 (PCIe3)</td><td>Slot 4 (PCIe4)</td><td>Slot 5 (PCIe5)</td><td>Slot 6 (PCIe6)</td><td>Slot 7 (PCIe7)</td></tr><tr><td>Source</td><td>CPU</td><td>PCH</td><td>PCH</td><td>CPU</td><td>PCH</td><td>PCH</td><td>PCH</td></tr><tr><td>Bandwidth</td><td>PCIe 5.0</td><td>PCIe 3.0</td><td>PCIe 3.0</td><td>PCIe 5.0</td><td>PCIe 4.0</td><td>PCIe 3.0</td><td>PCIe 4.0</td></tr><tr><td>Lane Config 1</td><td>x16</td><td rowspan="2">x1</td><td rowspan="2">x1</td><td>N/A</td><td rowspan="2">x4</td><td rowspan="2">x1</td><td rowspan="2">x4</td></tr><tr><td>Lane Config 2</td><td>x8</td><td>X8</td></tr></table>

SIM socket: 1 x SIM socket connected to M.2 key B

# M.2 Sockets:

M.2 Key-M (M2\_M1)

<table><tr><td>Pin</td><td>Signal</td><td>Signal</td><td>Pin</td></tr><tr><td>1</td><td>GND</td><td>+3.3V</td><td>2</td></tr><tr><td>3</td><td>GND</td><td>+3.3V</td><td>4</td></tr><tr><td>5</td><td>PERn3</td><td>NA</td><td>6</td></tr><tr><td>7</td><td>PERp3</td><td>NA</td><td>8</td></tr><tr><td>9</td><td>GND</td><td>LED</td><td>10</td></tr><tr><td>11</td><td>PETn3</td><td>+3.3V</td><td>12</td></tr><tr><td>13</td><td>PETp3</td><td>+3.3V</td><td>14</td></tr><tr><td>15</td><td>GND</td><td>+3.3V</td><td>16</td></tr><tr><td>17</td><td>PERn2</td><td>+3.3V</td><td>18</td></tr><tr><td>19</td><td>PERp2</td><td>NA</td><td>20</td></tr><tr><td>21</td><td>GND</td><td>NA</td><td>22</td></tr><tr><td>23</td><td>PETn2</td><td>NA</td><td>24</td></tr><tr><td>25</td><td>PETp2</td><td>NA</td><td>26</td></tr><tr><td>27</td><td>GND</td><td>NA</td><td>28</td></tr><tr><td>29</td><td>PERn1</td><td>NA</td><td>30</td></tr><tr><td>31</td><td>PERp1</td><td>NA</td><td>32</td></tr><tr><td>33</td><td>GND</td><td>NA</td><td>34</td></tr><tr><td>35</td><td>PETn1</td><td>NA</td><td>36</td></tr><tr><td>37</td><td>PETp1</td><td>DEVSLP</td><td>38</td></tr><tr><td>39</td><td>GND</td><td>SMB_CLK</td><td>40</td></tr><tr><td>41</td><td>PERn0</td><td>SMB_DATA</td><td>42</td></tr><tr><td>43</td><td>PERp0</td><td>NA</td><td>44</td></tr><tr><td>45</td><td>GND</td><td>NA</td><td>46</td></tr><tr><td>47</td><td>PETn0</td><td>NA</td><td>48</td></tr><tr><td>49</td><td>PETp0</td><td>PERST#</td><td>50</td></tr><tr><td>51</td><td>GND</td><td>CLKREQ#</td><td>52</td></tr><tr><td>53</td><td>PEFCLKn</td><td>WAKE#</td><td>54</td></tr><tr><td>55</td><td>PEFCLKp</td><td>NA</td><td>56</td></tr><tr><td>57</td><td>GND</td><td>NA</td><td>58</td></tr><tr><td></td><td></td><td></td><td></td></tr><tr><td>67</td><td>NA</td><td>NA</td><td>68</td></tr><tr><td>69</td><td>PEDET</td><td>+3.3V</td><td>70</td></tr><tr><td>71</td><td>GND</td><td>+3.3V</td><td>72</td></tr><tr><td>73</td><td>GND</td><td>+3.3V</td><td>74</td></tr><tr><td>75</td><td>GND</td><td></td><td></td></tr></table>

M.2 Key-E (M2\_E1)

<table><tr><td>Pin</td><td>Signal</td><td>Signal</td><td>Pin</td></tr><tr><td>1</td><td>GND</td><td>+3VSB</td><td>2</td></tr><tr><td>3</td><td>USB_D+</td><td>+3VSB</td><td>4</td></tr><tr><td>5</td><td>USB_D-</td><td>NA</td><td>6</td></tr><tr><td>7</td><td>GND</td><td>NA</td><td>8</td></tr><tr><td>9</td><td>CNV_WGR_D1-</td><td>CNV_RF_RESET</td><td>10</td></tr><tr><td>11</td><td>CNV_WGR_D1+</td><td>NA</td><td>12</td></tr><tr><td>13</td><td>GND</td><td>MODEM_CLKREQ</td><td>14</td></tr><tr><td>15</td><td>CNV_WGR_D0-</td><td>NA</td><td>16</td></tr><tr><td>17</td><td>CNV_WGR_D0+</td><td>GND</td><td>18</td></tr><tr><td>19</td><td>GND</td><td>NA</td><td>20</td></tr><tr><td>21</td><td>CNV_WGR_CLK-</td><td>CNV_BRI_RSP</td><td>22</td></tr><tr><td>23</td><td>CNV_WGR_CLK+</td><td></td><td></td></tr><tr><td></td><td></td><td></td><td></td></tr><tr><td>33</td><td>GND</td><td>CNV_BGI_DT</td><td>32</td></tr><tr><td>35</td><td>PETp</td><td>CNV_RGI_RSP</td><td>34</td></tr><tr><td>37</td><td>PETn</td><td>CNV_BRI_DT</td><td>36</td></tr><tr><td>39</td><td>GND</td><td>NA</td><td>38</td></tr><tr><td>41</td><td>PERp</td><td>NA</td><td>40</td></tr><tr><td>43</td><td>PERn</td><td>NA</td><td>42</td></tr><tr><td>45</td><td>GND</td><td>NA</td><td>44</td></tr><tr><td>47</td><td>PEFCLKp</td><td>NA</td><td>46</td></tr><tr><td>49</td><td>PEFCLKn</td><td>NA</td><td>48</td></tr><tr><td>51</td><td>GND</td><td>SUSCLK</td><td>50</td></tr><tr><td>53</td><td>CLKREQ#</td><td>PERST0#</td><td>52</td></tr><tr><td>55</td><td>WAKE#</td><td>W_DISABLE1#</td><td>54</td></tr><tr><td>57</td><td>GND</td><td>W_DISABLE2#</td><td>56</td></tr><tr><td>59</td><td>CNV_WT_D1-</td><td>SMB_DATA</td><td>58</td></tr><tr><td>61</td><td>CNV_WT_D1+</td><td>SMB_CLK</td><td>60</td></tr><tr><td>63</td><td>GND</td><td>NA</td><td>62</td></tr><tr><td>65</td><td>CNV_WT_D0-</td><td>CLKIN_XTAL_LCP</td><td>64</td></tr><tr><td>67</td><td>CNV_WT_D0+</td><td>NA</td><td>66</td></tr><tr><td>69</td><td>GND</td><td>NA</td><td>68</td></tr><tr><td>71</td><td>CNV_WT_CLK-</td><td>NA</td><td>70</td></tr><tr><td>73</td><td>CNV_WT_CLK+</td><td>+3VSB</td><td>72</td></tr><tr><td>75</td><td>GND</td><td>+3VSB</td><td>74</td></tr></table>

M.2 Key-B (M2\_B1)

<table><tr><td>Pin</td><td>Signal</td><td>Signal</td><td>Pin</td></tr><tr><td>1</td><td>NA</td><td>+3.3V</td><td>2</td></tr><tr><td>3</td><td>GND</td><td>+3.3V</td><td>4</td></tr><tr><td>5</td><td>GND</td><td>FuLL_Card_Power_off</td><td>6</td></tr><tr><td>7</td><td>USB_D+</td><td>W_DISABLE</td><td>8</td></tr><tr><td>9</td><td>USB_D-</td><td>WWAN_LED#</td><td>10</td></tr><tr><td>11</td><td>GND</td><td></td><td></td></tr><tr><td></td><td></td><td></td><td></td></tr><tr><td>21</td><td>GND</td><td>NA</td><td>20</td></tr><tr><td>23</td><td>NA</td><td>NA</td><td>22</td></tr><tr><td>25</td><td>NA</td><td>NA</td><td>24</td></tr><tr><td>27</td><td>GND</td><td>NA</td><td>26</td></tr><tr><td>29</td><td>USB3_RX-</td><td>NA</td><td>28</td></tr><tr><td>31</td><td>USB3_RX+</td><td>UIM_RESET</td><td>30</td></tr><tr><td>33</td><td>GND</td><td>UIM_CLK</td><td>32</td></tr><tr><td>35</td><td>USB3_TX-</td><td>UIM_DATA</td><td>34</td></tr><tr><td>37</td><td>USB3_TX+</td><td>UIM_PWR</td><td>36</td></tr><tr><td>39</td><td>GND</td><td>NA</td><td>38</td></tr><tr><td>41</td><td>PERn0</td><td>NA</td><td>40</td></tr><tr><td>43</td><td>PERP0</td><td>NA</td><td>42</td></tr><tr><td>45</td><td>GND</td><td>NA</td><td>44</td></tr><tr><td>47</td><td>PETn0</td><td>NA</td><td>46</td></tr><tr><td>49</td><td>PETP0</td><td>NA</td><td>48</td></tr><tr><td>51</td><td>GND</td><td>PERST#</td><td>50</td></tr><tr><td>53</td><td>PEFCLKn</td><td>CLKREQ#</td><td>52</td></tr><tr><td>55</td><td>PEFCLKp</td><td>WAKE#</td><td>54</td></tr><tr><td>57</td><td>GND</td><td>NA</td><td>56</td></tr><tr><td>59</td><td>NA</td><td>NA</td><td>58</td></tr><tr><td>61</td><td>NA</td><td>NA</td><td>60</td></tr><tr><td>63</td><td>NA</td><td>NA</td><td>62</td></tr><tr><td>65</td><td>NA</td><td>NA</td><td>64</td></tr><tr><td>67</td><td>NA</td><td>NA</td><td>66</td></tr><tr><td>69</td><td>NA</td><td>NA</td><td>68</td></tr><tr><td>71</td><td>GND</td><td>+3.3V</td><td>70</td></tr><tr><td>73</td><td>GND</td><td>+3.3V</td><td>72</td></tr><tr><td>75</td><td>NA</td><td>+3.3V</td><td>74</td></tr></table>

# 4 BIOS Setup

# 4.1 Menu Structure

This section presents the primary menus of the BIOS (UEFI) Setup Utility. Use the following table as a quick reference forthe contents of the UEFI Setup Utility. The subsections describe the submenus and options for each menu item.

Options to enter UEFI Setup Utility:

• Press [F2] or [Del] during POST (Power-On-Self-Test)
Press [Ctl] + [Alt] + [Del] after POST

<table><tr><td>Main</td><td>Advanced</td><td>H/W Monitor</td></tr><tr><td>Sets up the system time/date and displays the system information:- System Date- System Time</td><td>Contains advanced system configurations, including:► CPU Configuration► Chipset Configuration► Storage Configuration► Super IO Configuration► AMT Configuration► ACPI Configuration► USB Configuration► Trusted Computing► ThunderboltTMConfiguration► Instant Flash</td><td>Displays Hardware Status info, including:- CPU_FAN1 Setting- CHA_FAN1 Setting- CHA_FAN2 Setting- CHA_FAN3 Setting- Case Open Feature</td></tr><tr><td>Security</td><td>Boot</td><td>Exit</td></tr><tr><td>Changes or clears the supervisor/user password for the system:- Supervisor Password- User Password- Secure Boot</td><td>Configures the boot settings and boot priority for available devices:- Boot Option #1- Boot From Onboard LAN- Setup Prompt Timeout- Bootup Num-Lock- Full Screen Logo</td><td>Exits the UEFI Setup Utility while saving or discard the changes made:- Save Changes and Exit- Discard Changes and Exit- Discard Changes- Load UEFI Defaults- Launch EFI Shell from filesystem device</td></tr></table>

# 4.2 Main Menu

Upon entering the UEFI Setup Utility, the Main Menu is displayed, providing read-only information about your system and also allows you to set the System Date and Time. Refer to the screenshots and tables below for details of the submenus and settings.

<table><tr><td colspan="2">System Date [Tue 08/15/2023]
System Time [07:42:06]</td><td rowspan="3">Set the Date. Use Tab to switch between Date elements.
Default Ranges:
Year: 1998-9999
Months: 1-12
Days: Dependent on month
Range of Years may vary.</td></tr><tr><td colspan="2">UEFI Version : IMB-M47 L0.12
Processor Type : 12th Gen Intel(R) Core(TM) i3-12100E
Processor Speed : 3200MHz
Cache Size : 12MB</td></tr><tr><td colspan="2">Total Memory : 32GB with 64MB Shared Memory and 8MB GTT memory
Single-Channel Memory Mode</td></tr><tr><td colspan="2">DDR5_A1 : ADATA 32GB (DDR5-4000)
DDR5_A2 : None
DDR5_B1 : None
DDR5_B2 : None</td><td>←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit</td></tr><tr><td colspan="3">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

# 4.3 Advanced Menu

This section contains the configurations for the following: CPU Configuration, Chipset Configuration, Storage Configuration,Super IO Configuration, AMT Configuration, ACPI Configuration, USB Configuration, Trusted Computing, and Thunderbolt(TM) Configuration.

![Aptio Setup - AMI\nMain Advanced H/W Monitor Security Boot Exit\n► CPU Configuration\n► Chipset Configuration\n► Storage Configuration\n► Super IO Configuration\n► AMT Configuration\n► ACPI Configuration\n► USB Configuration\n► Trusted Computing\n► Thunderbolt(TM) Configuration\nUEFI Update Utility\n► Instant Flash\nCPU Configuration Parameters\n↔: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Option\nF1: General Help\nF7: Discard Changes\nF9: Load UEFI Defaults\nF10: Save and Exit\nESC: Exit\nVersion 2.22.1286 Copyright (C) 2023 AMI](.iap-m47-4u-50m-12900-1000-01-240625/edc482ab0754bcc27afca6a7b8fd146ecc3aa645a05ed9f1f87299f2a08eb171.jpg)

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Instant Flash</td><td>Instant Flash is a UEFI flash utility embedded in Flash ROM that allows you to update system UEFI without entering an operating systems, like MS-DOS or Windows®. Launch this tool and save the new UEFI file to your USB flash drive, floppy disk or hard drive, and then update your UEFI in only a few clicks without preparing an additional floppy diskette or other complicated flash utility. The USB flash drive or hard drive must use FAT32/16/12 file system. If you execute Instant Flash utility, the utility will show the UEFI files and their respective information. Select the proper UEFI file to update your UEFI and reboot your system after UEFI update process completes.</td></tr></table>

# 4.3.1 Advanced > CPU Configuration

<table><tr><td colspan="2">Aptio Setup - AMI</td></tr><tr><td colspan="2">Advanced</td></tr><tr><td colspan="2">12th Gen Intel(R) Core(TM) i3-12100E</td></tr><tr><td>Processor ID</td><td>90675</td></tr><tr><td>Microcode Revision</td><td>23</td></tr><tr><td>Processor Max Speed</td><td>3200 MHz</td></tr><tr><td>Processor Min Speed</td><td>400 MHz</td></tr><tr><td>Processor P-Cores</td><td>4Core(s) / 8Thread(s)</td></tr><tr><td>Processor E-Cores</td><td>0Core(s) / 0Thread(s)</td></tr><tr><td>Intel Hyper Threading Technology</td><td>[Enabled]</td></tr><tr><td>Active Processor P-Cores</td><td>[All]</td></tr><tr><td>CPU C States Support</td><td>[Enabled]</td></tr><tr><td>Enhanced Halt State(C1E)</td><td>[Enabled]</td></tr><tr><td>Package C State Support</td><td>[Disabled]</td></tr><tr><td>CFG Lock</td><td>[Disabled]</td></tr><tr><td>Intel Virtualization Technology</td><td>[Enabled]</td></tr><tr><td>Intel SpeedStep Technology</td><td>[Enabled]</td></tr><tr><td>Intel Turbo Boost Technology</td><td>[Enabled]</td></tr><tr><td>CPU Thermal Throttling</td><td>[Enabled]</td></tr></table>

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Intel Hyper Threading Technology</td><td>This option allows multiple threads to run on each core, so thatthe overall performance on threaded software is improved.Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Active Processor P-Cores</td><td>This allows you to select the number of cores to enable in each processor package.</td></tr><tr><td>Active Processor E-Cores</td><td>This allows you to select the number of E-Cores to enable in each processor package.NOTE: Number of P-Cores and E-Cores are looked at together. When both are {0,0},Pcode will enable all cores.</td></tr><tr><td>CPU C States Support</td><td>This enables CPU C States Support for power saving. It is recommendedto keep C3,C6 and C7 all enabled for better power saving.Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Enhanced Halt State (C1E)</td><td>The option enables Enhanced Halt State (C1E) for lower power consumption.Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Package C State Support</td><td>It enables CPU, PCIe, Memory, Graphics C State Support forpower saving.</td></tr><tr><td>CFG Lock</td><td>It enables or disables the CFG Lock.Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Intel Virtualization Technology</td><td>It allows a platform to run multiple operating systems andapplications in independent partitions, so that one computer system can function as multiple virtual systems.</td></tr><tr><td>Intel SpeedStep Technology</td><td>It allows processors to switch between multiple frequencies and voltage points for better power saving and heat dissipation. CPU turbo ratio can befixed when Intel SpeedStep Technology is set to [Disabled] and Intel Turbo Boost Technology is set to [Enabled].Configuration options: [Enabled] [Disabled].If you install Windows® 10 and want to enable this function, please set this item to [Enabled]. This item will be hidden if the current CPU does not support Intel SpeedStep technology.</td></tr><tr><td>Intel Turbo Boost Technology</td><td>It enables the processor to run above its base operating frequency when the operating system requests the highest performance state. The default value is [Enabled].Configuration options: [Enabled] [Disabled]</td></tr><tr><td>CPU Thermal Throttling</td><td>It enables CPU internal thermal controlmechanisms to keep the CPU from overheating.Configuration options: [Enabled] [Disabled]</td></tr></table>

# 4.3.2 Advanced > Chipset Configuration

<table><tr><td colspan="3">Aptio Setup - AMI Advanced</td></tr><tr><td>Primary Graphics Adapter</td><td>[PCI Express]</td><td rowspan="12">Select the power state after a power failure. If [Power Off] is selected, the power will remain off when the power recovers. If [Power On] is selected, the system will start to boot up when the power recovers.</td></tr><tr><td>Above 4G Decoding</td><td>[Enabled]</td></tr><tr><td>VT-d</td><td>[Enabled]</td></tr><tr><td>Re-Size BAR Support</td><td>[Disabled]</td></tr><tr><td>PCIE1 Bandwidth Mode</td><td>[x16 Mode]</td></tr><tr><td>PCIE1 Link Speed</td><td>[Auto]</td></tr><tr><td>PCIE2 Link Speed</td><td>[Auto]</td></tr><tr><td>PCIE3 Link Speed</td><td>[Auto]</td></tr><tr><td>PCIE4 Link Speed</td><td>[Auto]</td></tr><tr><td>PCIE5 Link Speed</td><td>[Auto]</td></tr><tr><td>PCIE6 Link Speed</td><td>[Auto]</td></tr><tr><td>PCIE7 Link Speed</td><td>[Auto]</td></tr><tr><td>Share Memory</td><td>[Auto]</td><td rowspan="8">←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit</td></tr><tr><td>IGPU Multi-Monitor</td><td>[Disabled]</td></tr><tr><td>Render Standby</td><td>[Disabled]</td></tr><tr><td>Onboard LAN1</td><td>[Enabled]</td></tr><tr><td>Onboard LAN2</td><td>[Enabled]</td></tr><tr><td>Onboard LAN3</td><td>[Enabled]</td></tr><tr><td>Onboard HD Audio</td><td>[Enabled]</td></tr><tr><td>Restore on AC/Power Loss</td><td>[Power Off]</td></tr></table>

Version 2.22.1286 Copyright (C) 2023 AMI

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Primary Graphics Adapter</td><td>The option allows you to select a primary VGA.Configuration options: [Onboard] [PCI Express] (Options vary when you have installed agraphics card on your motherboard.)</td></tr><tr><td>Above 4G Decoding</td><td>The option allows you to enable or disable above 4G Memory Mapped IO decoding. This is disabled automatically when Aperture Size is set to 2048MB.Configuration options: [Enabled] [Disabled]</td></tr><tr><td>VT-d</td><td>Intel® Virtualization Technology for Directed I/O helps your virtual machine monitor betterutilize hardware by improving application compatibility and reliability, and providing additional levels of manageability, security, isolation, and I/O performance.Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Re-Size BAR Support</td><td>If system has Resizable BAR capable PCIe Devices, this option enables or disablesResizable BAR Support.</td></tr><tr><td>PCIE1 Bandwidth Mode</td><td>Select PCIE1 Bandwidth. Select [PCIE4] when using PCIE4 slot. Select [x8 / x8 Mode]when using Riser card on PCIE1 slot. (PCIE4 slot will be disabled)</td></tr><tr><td>PCIE1 Link Speed</td><td>The option allows you to configure PCIE1 Slot Link Speed. Auto mode is optimizing for overclocking.Configuration options: [Auto] [Gen1] [Gen2] [Gen3] [Gen4] [Gen5] (Options vary dependingon your motherboard.)</td></tr><tr><td>PCIE2 Link Speed</td><td>The option allows you to configure PCIE2 Slot Link Speed. Auto mode is optimizing for overclocking. Configuration options: [Auto] [Gen1] [Gen2] [Gen3] (Options vary depending on your motherboard.)</td></tr><tr><td>PCIE3 Link Speed</td><td>The option allows you to configure PCIE3 Slot Link Speed. Auto mode is optimizing for overclocking. Configuration options: [Auto] [Gen1] [Gen2] [Gen3] (Options vary depending on your motherboard.)</td></tr><tr><td>PCIE4 Link Speed</td><td>The option allows you to configure PCIE4 Slot Link Speed. Auto mode is optimizing for overclocking. Configuration options: [Auto] [Gen1] [Gen2] [Gen3] [Gen4] [Gen5] (Options vary depending on your motherboard.)</td></tr><tr><td>PCIE5 Link Speed</td><td>The option allows you to configure PCIE5 Slot Link Speed. Auto mode is optimizing for overclocking. Configuration options: [Auto] [Gen1] [Gen2] [Gen3] [Gen4] (Options vary depending on your motherboard.)</td></tr><tr><td>PCIE6 Link Speed</td><td>The option allows you to configure PCIE6 Slot Link Speed. Auto mode is optimizing for overclocking. Configuration options: [Auto] [Gen1] [Gen2] [Gen3] (Options vary depending on your motherboard.)</td></tr><tr><td>PCIE7 Link Speed</td><td>The option allows you to configure PCIE7 Slot Link Speed. Auto mode is optimizing for overclocking. Configuration options: [Auto] [Gen1] [Gen2] [Gen3] [Gen4] (Options vary depending on your motherboard.)</td></tr><tr><td>Share Memory</td><td>Share memory allows you to configure the size of memory that is allocated to the integrated graphics processor when the system boots up. Configuration options: [Auto] [32 M] [64 M] [128M] [256M] [512 M] Options vary depending on the memory you use on your motherboard.</td></tr><tr><td>IGPU Multi-Monitor</td><td>Select [Disabled] to disable the integrated graphics when an external graphics card is installed. Select [Enabled] to keep the integrated graphics enabled at all times. Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Render Standby</td><td>Power down the render unit when the GPU is idle for lower power consumption.</td></tr><tr><td>Onboard LAN (1,2,3)</td><td>Enables the Onboard LAN1,2,3 features</td></tr><tr><td>Onboard HD Audio</td><td>Onboard HD Audio a I lows you to enable or disable the onboard HD audio controller. Setthis item to [Auto] to enable the onboard HD and automatically disable it when a sound card is installed. Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Restore on AC/Power Loss</td><td>The option allows you to select the power state after a power failure. [Power Off] sets the power to remain off when the power recovers. [Power On] sets the system to start to boot up when the power recovers.</td></tr></table>

# 4.3.3 Advanced > Storage Configuration

<table><tr><td colspan="2">Aptio Setup - AMI Advanced</td></tr><tr><td>VMD Configuration
SATA Controller(s) [Enabled]
SATA Mode Selection [AHCI]
Hybrid Storage Detection and [Disabled]
Configuration Mode
SATA Aggressive Link Power [Disabled]
Management
Hard Disk S.M.A.R.T [Enabled]</td><td>VMD Configuration settings</td></tr><tr><td>SATA3_0: Not Detected
SATA3_1: Not Detected
SATA3_2: Not Detected
SATA3_3: Not Detected
SATA3_4: Not Detected
SATA3_5: Not Detected
SATA3_6: Not Detected
SATA3_7: Not Detected</td><td>←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>VMD Configuration</td><td>This item allows you to enable or disable the Intel VMD support function.</td></tr><tr><td>SATA Controller(s)</td><td>The option allows you to enable or disable the SATA controllers.Configuration options: [Enabled] [Disabled]</td></tr><tr><td>SATA Mode Selection</td><td>AHCI supports new features that improve performance.Configuration option: [AHCI]</td></tr><tr><td>Hybrid Storage Detection andConfiguration Mode</td><td>The option allows you to select Hybrid Storage Detection and Configuration Mode. Configuration options: [Dynamic Configuration for Hybrid Storage Enable] [Disabled]</td></tr><tr><td>SATA Aggressive Link PowerManagement</td><td>SATA Aggressive Link Power Management allows SATA devices to enter a low power state during periods of inactivity to save power. It is supported only by AHCI mode.Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Hard Disk S.M.A.R.T.</td><td>S.M.A.R.T stands for Self-Monitoring, Analysis, and Reporting Technology. It is a monitoring system for computer hard disk drives to detect and report on various indicatorsof reliability.Configuration options: [Enabled] [Disabled]</td></tr></table>

<table><tr><td colspan="2">Aptio Setup - AMI</td></tr><tr><td colspan="2">Advanced</td></tr><tr><td rowspan="2">VMD ConfigurationEnable VMD controller [Disabled]</td><td>Enable/Disable to VMD controller</td></tr><tr><td>←: Select Screen↑↓: Select ItemEnter: Select+/-: Change OptionF1: General HelpF7: Discard ChangesF9: Load UEFI DefaultsF10: Save and ExitESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Enable VMD Controller</td><td>Enables or disables the Intel VMD controller. The following items appear when it is set to [Enabled].</td></tr></table>

# 4.3.4 Advanced > Suprt IO Configuration

<table><tr><td colspan="3">Aptio Setup - AMI</td></tr><tr><td colspan="3">Advanced</td></tr><tr><td>COM1</td><td>[Enabled]</td><td rowspan="11">Enable or Disable COM1IO=3F8h; IRQ=4;</td></tr><tr><td>Type Select</td><td>[RS232]</td></tr><tr><td>COM2</td><td>[Enabled]</td></tr><tr><td>Type Select</td><td>[RS232]</td></tr><tr><td>COM3</td><td>[Enabled]</td></tr><tr><td>COM4</td><td>[Enabled]</td></tr><tr><td>COM5</td><td>[Enabled]</td></tr><tr><td>COM6</td><td>[Enabled]</td></tr><tr><td>Parallel Port</td><td>[Enabled]</td></tr><tr><td>Device Mode</td><td>[ECP and EPP 1.9 Mode]</td></tr><tr><td>Change Settings</td><td>[Auto]</td></tr><tr><td>WDT Timeout Reset</td><td>[Disabled]</td><td>←: Select Screen↑↓: Select ItemEnter: Select+/-: Change OptionF1: General HelpF7: Discard ChangesF9: Load UEFI DefaultsF10: Save and ExitESC: Exit</td></tr></table>

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>COM1 Configuration</td><td>Use this to set parameters of COM1.</td></tr><tr><td>Type Select</td><td>Use this to select COM1 port type: [RS232], [RS422] or [RS485].</td></tr><tr><td>COM2 Configuration</td><td>Use this to set parameters of COM2.</td></tr><tr><td>Type Select</td><td>Use this to select COM2 port type: [RS232], [RS422] or [RS485].</td></tr><tr><td>COM3 Configuration</td><td>Use this to set parameters of COM3.</td></tr><tr><td>COM4 Configuration</td><td>Use this to set parameters of COM4.</td></tr><tr><td>COM5 Configuration</td><td>Use this to set parameters of COM5.</td></tr><tr><td>COM6 Configuration</td><td>Use this to set parameters of COM6.</td></tr><tr><td>Parallel Port</td><td>The option enables or disables the Parallel port.</td></tr><tr><td>Device Mode</td><td>Selects the device mode according to your connected device.</td></tr><tr><td>Change Settings</td><td>Select the address of the Parallel port.</td></tr><tr><td>WDT Timeout Reset</td><td>Use this to set the Watch Dog Timer.</td></tr></table>

# 4.3.5 Advanced > AMT Technology

<table><tr><td colspan="2">Advanced Aptio Setup - AMI</td></tr><tr><td>USB Provisioning of AMT [Disabled]
MAC Pass Through [Disabled]
Activate Remote Assistance [Disabled]
Process
Unconfigure ME [Disabled]
► ASF Configuration
► Secure Erase Configuration
► One Click Recovery(OCR) Configuration
► MEBx</td><td>Enable/Disable of AMT USB Provisioning.</td></tr><tr><td></td><td>+:-: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>USB Provisioning of AMT</td><td>Use this to enable or disable AMT USB Provisioning. The default is [Disabled].</td></tr><tr><td>MAC Pass Through</td><td>The option enables or disables MAC Pass Through function.</td></tr><tr><td>Activate Remote AssistanceProcess</td><td>Trigger CIRA boot. The default is [Disabled].</td></tr><tr><td>Un-Configure ME</td><td>Un-Configure ME without password. The default is [Disabled].</td></tr><tr><td>ASF Configuration</td><td>The option allows you to configure Alert Standard Format parameters.</td></tr><tr><td>Secure Erase Configuration</td><td>Secure Erase configuration menu.</td></tr><tr><td>One Click Recovery(OCR) Configuration</td><td>Configuration setting for One Click Recovery. This allows access for AMT to boot arecovery OS application</td></tr><tr><td>MEBx</td><td>This Formset contains forms for configuring MEBx.</td></tr></table>

<table><tr><td colspan="3">Advanced</td></tr><tr><td rowspan="2">PET Progress WatchDog OS Timer BIOS Timer ASF Sensors Table</td><td rowspan="2">[Enabled] [Disabled] 0 0 [Disabled]</td><td>Enable/Disable PET Events Progress to receive PET Events.</td></tr><tr><td>←: Select Screen ↑↓: Select Item Enter: Select +/-: Change Option F1: General Help F7: Discard Changes F9: Load UEFI Defaults F10: Save and Exit ESC: Exit</td></tr></table>

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>PET Progress</td><td>User can enable or disable PET Events progress to receive PET events or not. Thedefault is [Enabled].</td></tr><tr><td>Watchdog</td><td>Use this to enable or disable AMT Watchdog Timer. The default is [Disabled].</td></tr><tr><td>ASF Sensors Table</td><td>Use this to enable or disable ASF Sensor Table. The default is [Disabled].</td></tr></table>

<table><tr><td colspan="3">Aptio Setup - AMI</td></tr><tr><td colspan="3">Advanced</td></tr><tr><td rowspan="2">Secure Erase modeForce Secure Erase</td><td rowspan="2">[Simulated][Disabled]</td><td>Change Secure Erase module behavior: Simulated: Performs SE flow without erasing SSD Real: Erase SSD. *** If SATA device is used, OEM could use SECURE_ERASE_HOOK_PROTOCOL to remove SATA power to skip G3 cycle. ***</td></tr><tr><td>↔: Select Screen↑↓: Select ItemEnter: Select+/-: Change OptionF1: General HelpF7: Discard ChangesF9: Load UEFI DefaultsF10: Save and ExitESC: Exit</td></tr></table>

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Secure Erase mode</td><td>Change Secure Erase module behavior: Simulated: Performs SE flow without erasingSSD. Real: Erase SSD.</td></tr><tr><td>Force Secure Erase</td><td>Use this to enable or disable Force Secure Erase on next boot. The default is [Disabled].</td></tr></table>

<table><tr><td colspan="2">Aptio Setup - AMI</td></tr><tr><td rowspan="2">OCR Https Boot [Enabled]OCR PBA Boot [Enabled]OCR Windows Recovery Boot [Enabled]OCR Disable Secure Boot [Enabled]</td><td>Enable/Disable One ClickRecovery Https Boot</td></tr><tr><td>←→: Select Screen↑↓: Select ItemEnter: Select+/-: Change OptionF1: General HelpF7: Discard ChangesF9: Load UEFI DefaultsF10: Save and ExitESC: Exit</td></tr></table>

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>OCR Http Boot</td><td>Use this to enable or disable One Click Recovery Https Boot. The default is [Enabled].</td></tr><tr><td>OCR PBA Boot</td><td>Use this to enable or disable One Click Recovery PBA Boot. The default is [Enabled].</td></tr><tr><td>OCR Windows Recovery Boot</td><td>Use this to enable or disable One Click Recovery Windows Recovery Boot. The default is [Enabled].</td></tr><tr><td>OCR Disable Secure Boot</td><td>Use this to allow CSME to request Secure Boot to be disabled for One Click Recovery.The default is [Enabled].</td></tr></table>

<table><tr><td colspan="2">Aptio Setup - AMI Advanced</td></tr><tr><td>Intel(R) ME Password</td><td>MEBx Login</td></tr><tr><td></td><td>←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Intel(R) ME Password</td><td>MEBx Login</td></tr></table>

# 4.3.6 Advanced > ACPI Configuration

<table><tr><td>Suspend to RAM [Auto] PCIE Devices Power On [Disabled] RTC Alarm Power On [By OS]</td><td>It is recommended to select auto for ACPI S3 power saving.</td></tr><tr><td></td><td>↔: Select Screen ↑↓: Select Item Enter: Select +/-: Change Option F1: General Help F7: Discard Changes F9: Load UEFI Defaults F10: Save and Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Suspend to RAM</td><td>Suspend to RAM allows you to select [Disabled] for ACPI suspend type S1. It is recommended to select [Auto] for ACPI S3 power saving.Configuration options: [Auto] [Disabled]</td></tr><tr><td>PCIE Devices Power On</td><td>Use this item to enable or disable PCIE devices to turn on the system from the power-soft-off mode.</td></tr><tr><td>RTC Alarm Power On</td><td>RTC Alarm Power On allows the system to be waked up by the real time clock alarm. Setit to By OS to let it be handled by your operating system.Configuration options: [Enabled] [Disabled] [By OS]</td></tr></table>

# 4.3.7 Advanced > USB Configuration

<table><tr><td colspan="2">Aptio Setup - AMI Advanced</td></tr><tr><td rowspan="2">USB Power Control [Default Setting] M.2 Key_B USB function [Enabled]</td><td>Always enabled: Enable USB power in S0/S3/S4/S5, Default setting: Enable USB power in S0/S3, disable USB power in S4/S5.</td></tr><tr><td>↔: Select Screen ↑↓: Select Item Enter: Select +/-: Change Option F1: General Help F7: Discard Changes F9: Load UEFI Defaults F10: Save and Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>USB Support</td><td>Use this option to control USB power.</td></tr><tr><td>M.2 Key_B Function</td><td>The item enables or disables M.2 Key-B USB function.</td></tr></table>

# 4.3.8 Advanced > Trusted Computing

<table><tr><td colspan="3">Aptio Setup - AMI</td></tr><tr><td colspan="3">Advanced</td></tr><tr><td colspan="2">TPM 2.0 Device FoundFirmware Version: 7.85Vendor: IFX</td><td rowspan="3">Enables or Disables BIOS support for security device.O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available.</td></tr><tr><td colspan="2">Security Device Support [Enable]Active PCR banks SHA256Available PCR banks SHA256</td></tr><tr><td colspan="2">SHA256 PCR Bank [Enabled]</td></tr><tr><td colspan="2">Pending operation [None]Platform Hierarchy [Enabled]Storage Hierarchy [Enabled]Endorsement Hierarchy [Enabled]Physical Presence Spec Version [1.3]TPM 2.0 InterfaceType [TIS]Device Select [Auto]</td><td rowspan="2">←: Select Screen↑↓: Select ItemEnter: Select+/-: Change OptionF1: General HelpF7: Discard ChangesF9: Load UEFI DefaultsF10: Save and ExitESC: Exit</td></tr><tr><td colspan="2">Onboard TPM [Enabled]</td></tr></table>

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Security Device Support</td><td>Security Device Support allows you to enable or disable BIOS support for security device. O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not beavailable. Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Active PCR banks</td><td>This item displays active PCR Banks.</td></tr><tr><td>Available PCR Banks</td><td>This item displays available PCR Banks.</td></tr><tr><td>SHA256 PCR Bank</td><td>SHA256 PCR Bank allows you to enable or disable SHA256 PCR Bank. Configurationoptions: [Enabled] [Disabled]</td></tr><tr><td>Pending Operation</td><td>Pending Operation allows you to schedule an Operation for the Security Device. NOTE: Your computer will reboot during restart in order to change State of the Device. Configuration options: [None] [TPM Clear]</td></tr><tr><td>Platform Hierarchy</td><td>This item allows you to enable or disable Platform Hierarchy. Configuration options:[Enabled] [Disabled]</td></tr><tr><td>Storage Hierarchy</td><td>This item allows you to enable or disable Storage Hierarchy. Configuration options:[Enabled] [Disabled]</td></tr><tr><td>Endorsement Hierarchy</td><td>This item allows you to enable or disable Endorsement Hierarchy. Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Physical Presence Spec Version</td><td>Select this item to tell OS to support PPI spec version 1.2 or 1.3. Please note that someHCK tests might not support version 1.3. Configuration options: [1.2] [1.3]</td></tr><tr><td>TPM 2.0 Interface Type</td><td>This item allows you to view the Communication Interface to TPM 2.0 Device: CRB orITS.</td></tr><tr><td>Device Select</td><td>This item allows you to select the TPM device to be supported.[TPM 1.2] restricts support to TPM 1.2 devices.[TPM 2.0] restricts support to TPM 2.0 devices.[Auto] supports both TPM 1.2 and TPM 2.0 devices with the default set to TPM 2.0devices. If TPM 2.0 devices are not found, TPM 1.2 devices will be enumerated.</td></tr><tr><td>Onboard TPM</td><td>The option enables or disables Intel PTT in ME. Disable this option to use discrete TPMModule.</td></tr></table>

# 4.4 Thunderbolt (TM) Configuration

<table><tr><td colspan="2">Aptio Setup - AMI Advanced</td></tr><tr><td>Discrete Thunderbolt(TM) Support [Disabled]</td><td>Enable or Disable Discrete Thunderbolt(TM) Support.</td></tr><tr><td></td><td>←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Discrete Thunderbolt(TM)Support</td><td>This item enables or disables the Discrete Thunderbolt(TM) Support.</td></tr></table>

# 4.5 Hardware Health Environment Monitoring Screen

This screen allows you to monitor the status of your system and installed devices, such as CPU and motherboard temperature, CPU fan speed, chassis fan speed, and the critical voltage.

<table><tr><td colspan="2">Aptio Setup - AMI</td></tr><tr><td colspan="2">Main Advanced H/W Monitor Security Boot Exit</td></tr><tr><td>Hardware Health Event Monitoring</td><td>Quiet Fan Function Control</td></tr><tr><td>CPU Temperature : +31 °C
M/B Temperature : +32 °C</td><td></td></tr><tr><td>CPU_FAN1 Speed : 2923 RPM
CHA_FAN1 Speed : N/A
CHA_FAN2 Speed : N/A
CHA_FAN3 Speed : N/A</td><td></td></tr><tr><td>+3V : +3.408 V
+3VSB : +3.456 V
VCORE : +0.880 V
VCCM : +1.120 V
VBAT : +3.088 V
+12V : +12.160 V</td><td>←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit</td></tr><tr><td>CPU_FAN1 Setting [Full On]
CHA_FAN1 Setting [Full On]
CHA_FAN2 Setting [Full On]
CHA_FAN3 Setting [Full On]
Case Open Feature [Disabled]</td><td></td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>CPU_Fan 1 Setting</td><td>This item allows you to select a fan mode for CPU Fan 1. The default value is [Full On]. Configuration options: [Full On] [Automatic Mode]</td></tr><tr><td>CHA_Fan 1 Setting</td><td>This allows you to set chassis fan 1&#x27;s speed. The default value is [Full On]. Configurationoptions: [Full On] [Automatic Mode]</td></tr><tr><td>CHA_Fan 2 Setting</td><td>This allows you to set chassis fan 2&#x27;s speed. The default value is [Full On]. Configurationoptions: [Full On] [Manual]</td></tr><tr><td>CHA_Fan 3 Setting</td><td>This allows you to set chassis fan 3&#x27;s speed. The default value is [Full On]. Configurationoptions: [Full On] [Manual]</td></tr><tr><td>Case Open Feature</td><td>This item allows you to enable or disable case open detection feature. The default isvalue [Disabled].</td></tr><tr><td>Clear Status</td><td>This option appears only when the case open has been detected. Use this option to keepor clear the record of previous chassis intrusion status.</td></tr></table>

# 4.6 Security Screen

The Security Screen lets you change or clear the supervisor / user passwords for the system.

<table><tr><td colspan="2">Aptio Setup - AMI</td></tr><tr><td colspan="2">Main Advanced H/W Monitor Security Boot Exit</td></tr><tr><td rowspan="2">Supervisor Password Not InstalledUser Password Not InstalledSupervisor PasswordUser PasswordSecure Boot</td><td>Set or change the password for the administrator account. Only the administrator has authority to change the settings in the UEFI Setup Utility. Leave it blank and press enter to remove the password.</td></tr><tr><td>←: Select Screen↑↓: Select ItemEnter: Select+/-: Change OptionF1: General HelpF7: Discard ChangesF9: Load UEFI DefaultsF10: Save and ExitESC: Exit</td></tr></table>

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Supervisor Password</td><td>Set or change the password for the administrator account. Only the administrator has the authority to change the settings in the UEFI Setup Utility. Leave it blank and press enter to remove the password.</td></tr><tr><td>User Password</td><td>Set or change the password for the user account. Users are unable to change the set- tings in the UEFI Setup Utility. Leave it blank and press enter to remove the pass- word.</td></tr><tr><td>Secure Boot</td><td>Press [Enter] to configure the Secure Boot Settings. The feature protects the system from unauthorized access and malwares during POST.</td></tr></table>

<table><tr><td colspan="3">Aptio Setup - AMI</td></tr><tr><td colspan="3">Security</td></tr><tr><td>System Mode State</td><td>Setup</td><td rowspan="4">Secure Boot feature is Active if Secure Boot is Enabled, Platform Key(PK) is enrolled and the System is in User mode. The mode change requires platform reset</td></tr><tr><td>Secure Boot</td><td>[Disabled] Not Active</td></tr><tr><td>Secure Boot Mode</td><td>[Custom]</td></tr><tr><td colspan="2">Install default Secure Boot keys Clear Secure Boot keys Key Management</td></tr><tr><td colspan="2"></td><td>←: Select Screen ↑↓: Select Item Enter: Select +/-: Change Option F1: General Help F7: Discard Changes F9: Load UEFI Defaults F10: Save and Exit ESC: Exit</td></tr><tr><td colspan="3">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Secure Boot Mode</td><td>[Standard] Select this item and the system will automatically load the Secure Boot keys from the BIOS database.[Custom] Select this item and Secure Boot Policy variables can be configured by aphysically present user without full authentication.</td></tr><tr><td>Install Default Secure BootKeys</td><td>Please install default secure boot keys if it&#x27;s the first time you use secure boot.</td></tr><tr><td>Clear Secure Boot Keys</td><td>This item appears only when you load the default Secure Boot keys. Use this item to clear all default Secure Boot keys.</td></tr><tr><td>Key Management</td><td>This item enables expert users to modify Secure Boot Policy variables without full authentication.This appears only when you set Secure Boot Mode to [Custom].</td></tr></table>

Aptio Setup - AMI

Security

Vendor Keys

valid

Install default Secure Boot keys
Clear Secure Boot keys
Enroll Efi Image
Export Secure Boot variables

Secure Boot variable

Sizel Keys| Key Source

Platform Key

0l 0l No Keys

Key Exchange Keys

01 0l No Keys

Authorized Signat

0i 0l No Keys

Forbidden Signatures(dbx)l

0 0l No Keys

Authorized TimeStamps(dbt) l

0 0l No Keys

OsRecovery Signatures(dbr)

oi 0l No Keys

Install factory default Secure Boot keys after the platform reset and while the System is in Setup mode

++: Select Screen

t↓: Select Item

Enter: Select

+/-: Change Option

F1: General Help

F7: Discard Changes

F9: Load UEFI Defaults

F10: Save and Exit

ESC: Exit

Version 2.22.1286 Copyright (C) 2023 AMI

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Factory Key Provision</td><td>Allows you to install factory default Secure Boot keys after the platform reset and whilethe System is in Setup mode.</td></tr><tr><td>Install Default Secure BootKeys</td><td>Please install default secure boot keys if it's the first time you use secure boot.</td></tr><tr><td>Clear Secure Boot Keys</td><td>This item appears only when you load the default Secure Boot keys. Use this item to clear all default Secure Boot keys.</td></tr><tr><td>Enroll Efi Image</td><td>Allows Efi image to run in Secure Boot Mode. Enroll SHA256 Hash certificate of a PEimage into Authorized Signature Database (db).</td></tr><tr><td>Export Secure Boot variables</td><td>Allows you to copy NVRAM content of Secure Boot variables to files in a root folder on a file system device.</td></tr><tr><td>Platform Key(PK)</td><td>Enroll Factory Defaults or load certificates from a file:1. Public Key Certificatea) EFI_SIGNATURE_LISTb) EFI_CERT_X509 (DER)c) EFI_CERT_RSA2048 (bin)d) EFI_CERT_SHAXXX2. Authenticated UEFI Variable3. EFI PE/COFF Image(SHA256)Key Source: Factory, Modified, Mixed</td></tr><tr><td>Authorized Signatures</td><td>Enroll Factory Defaults or load certificates from a file:1. Public Key Certificate:a) EFI_SIGNATURE_LISTb) EFI_CERT_X509 (DER)c) EFI_CERT_RSA2048 (bin)d) EFI_CERT_SHAXXX2. Authenticated UEFI Variable3. EFI PE/COFF Image(SHA256)Key Source: Factory, Modified, Mixed</td></tr><tr><td>Forbidden Signatures</td><td>Enroll Factory Defaults or load certificates from a file:1. Public Key Certificate:a) EFI_SIGNATURE_LISTb) EFI_CERT_X509 (DER)c) EFI_CERT_RSA2048 (bin)d) EFI_CERT_SHAXXX2. Authenticated UEFI Variable3. EFI PE/COFF Image(SHA256)Key Source: Factory, Modified, Mixed</td></tr><tr><td>Authorized TimeStamps</td><td>Enroll Factory Defaults or load certificates from a file:1. Public Key Certificate:a) EFI_SIGNATURE_LISTb) EFI_CERT_X509 (DER)c) EFI_CERT_RSA2048 (bin)d) EFI_CERT_SHAXXX2. Authenticated UEFI Variable3. EFI PE/COFF Image(SHA256)Key Source: Factory, Modified, Mixed</td></tr><tr><td>OsRecovery Signatures</td><td>Enroll Factory Defaults or load certificates from a file:1. Public Key Certificate:a) EFI_SIGNATURE_LISTb) EFI_CERT_X509 (DER)c) EFI_CERT_RSA2048 (bin)d) EFI_CERT_SHAXXX2. Authenticated UEFI Variable3. EFI PE/COFF Image(SHA256)Key Source: Factory, Modified, Mixed</td></tr><tr><td>Authorized Signatures</td><td>Enroll Factory Defaults or load certificates from a file:1. Public Key Certificate:a) EFI_SIGNATURE_LISTb) EFI_CERT_X509 (DER)c) EFI_CERT_RSA2048 (bin)d) EFI_CERT_SHAXXX2. Authenticated UEFI Variable3. EFI PE/COFF Image(SHA256)Key Source: Factory, Modified, Mixed</td></tr></table>

# 4.7 Boot Screen

This section displays the available devices on your system for you to configure the boot priority and settings.

<table><tr><td colspan="2">Aptio Setup - AMI</td></tr><tr><td colspan="2">Main Advanced H/W Monitor Security Boot Exit</td></tr><tr><td rowspan="27">Boot Option PrioritiesBoot Option #1 [UEFI: JetFlashTranscend 8GB 1100, Partition 1 (JetFlashTranscend 8GB 1100)]Boot From Onboard LAN [Disabled]Setup Prompt Timeout 1Bootup Num-Lock [On]Full Screen Logo [Enabled]</td><td rowspan="26">Sets the system boot order↔: Select Screen↑↓: Select ItemEnter: Select+/-: Change OptionF1: General HelpF7: Discard ChangesF9: Load UEFI DefaultsF10: Save and ExitESC: Exit</td></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr><td></td></tr></table>

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Boot Option #1</td><td>The item allows you to set the system boot order.</td></tr><tr><td>Boot From Onboard LAN</td><td>The item allows the system to be waked up by the onboard LAN.Configuration options: [Enabled] [Disabled]</td></tr><tr><td>Setup Prompt Timeout</td><td>The item allows you to configures the number of seconds to wait for the UEFI setuputility. Configuration options: [1] - [65535]</td></tr><tr><td>Bootup Num-Lock</td><td>The item allows you to select whether Num Lock should be turned on or off when thesystem boots up. Configuration options: [On] [Off]</td></tr><tr><td>Full Screen Logo</td><td>[Enabled] Select this item to display the boot logo. [Disabled] Select this item to show normal POST messages.</td></tr></table>

# 4.8 Exit Screen

<table><tr><td colspan="2">Aptio Setup - AMI</td></tr><tr><td colspan="2">Main Advanced H/W Monitor Security Boot Exit</td></tr><tr><td rowspan="2">Save Changes and ExitDiscard Changes and ExitDiscard ChangesLoad UEFI DefaultsLaunch EFI Shell from filesystem device</td><td>Load UEFI Default values for all the setup questions.F9 key can be used for this operation.</td></tr><tr><td>←→: Select Screen↑↓: Select ItemEnter: Select+/-: Change OptionF1: General HelpF7: Discard ChangesF9: Load UEFI DefaultsF10: Save and ExitESC: Exit</td></tr></table>

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Save Changes and Exit</td><td>When you select this option, the following message “Save configuration changes and exitsetup?” will pop out. Select [Yes] to save the changes and exit the UEFI SETUP UTILITY.</td></tr><tr><td>Discard Changes and Exit</td><td>When you select this option, the following message “Discard changes and exit setup?” will pop out. Select [Yes] to exit the UEFI SETUP UTILITY without saving any changes.</td></tr><tr><td>Discard Changes</td><td>When you select this option, the following message “Discard changes?” will pop out.Select [Yes] to discard all the changes.</td></tr><tr><td>Load UEFI Defaults</td><td>The item allows you to load UEFI default values for all options. The F9 key can be usedfor this operation.</td></tr><tr><td>Launch EFI Shell from filesystem device</td><td>The item allows you to copy shellx64.efi to the root directory to launch EFI Shell.</td></tr></table>

This page intentionally left blank.

# Safety Instructions

Read and follow all instructions marked on the product and in the documentation before you operate your system. Retain all safety and operating instructions for future use.

• Please read these safety instructions carefully.
• Please keep this User‘s Manual for later reference.
• Read the specifications section of this manual for detailed information on the operating environment of this equipment.
• When installing/mounting or uninstalling/removing equipment, turn off the power and unplug any power cords/cables.
• To avoid electrical shock and/or damage to equipment:

 Keep equipment away from water or liquid sources.
 Keep equipment away from high heat or high humidity.
 Keep equipment properly ventilated (do not block or cover ventilation openings).
 Make sure to use recommended voltage and power source settings.
 Always install and operate equipment near an easily accessible electrical socket-outlet.
 Secure the power cord (do not place any object on/over the power cord).
 Only install/attach and operate equipment on stable surfaces and/or recommended mountings.
 If the equipment will not be used for long periods of time, turn off and unplug the equipment from its power source.

• Never attempt to fix the equipment. Equipment should only be serviced by qualified personnel.

# Getting Service

Ask an Expert: https://www.adlinktech.com/en/Askanexpert

# ADLINK Technology, Inc.

<table><tr><td>Address:</td><td>No. 66, Huaya 1st Road, Guishan DistrictTaoyuan City 333, Taiwan</td></tr><tr><td>Tel:</td><td>+886-3-216-5088</td></tr><tr><td>Fax:</td><td>+886-3-328-5723</td></tr><tr><td>Email:</td><td>service@adlinktech.com</td></tr></table>

# Ampro ADLINK Technology, Inc.

Address: 6450 Via Del Oro, San Jose, CA 95119-1208, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

Fax: +1-408-600-1189

Email: info@adlinktech.com

# ADLINK Technology (China) Co., Ltd.

<table><tr><td>Address:</td><td>300 Fang Chun Rd., Zhangjiang Hi-Tech Park, Pudong New Area Shanghai, 201203 China</td></tr><tr><td>Tel:</td><td>+86-21-5132-8988</td></tr><tr><td>Fax:</td><td>+86-21-5132-3588</td></tr><tr><td>Email:</td><td>market@adlinktech.com</td></tr></table>

# ADLINK Technology GmbH

Address: Hans-Thoma-Strasse 11, D-68163, Mannheim, Germany

Tel: +49-621-43214-0

Fax: +49-621 43214-30

Email: emea@adlinktech.com

Please visit the Contact page at www.adlinktech.com for information on how to contact the ADLINK regional office nearest you.
[🔗 Link to the original document](.iap-m47-4u-50m-12900-1000-01-240625/iap-m47-4u-50m-12900-1000-01-240625.pdf)