# IMB-M43

ATX Intel $^{®}$ Core $^{TM}$ i7/i5/i3

Industrial Motherboard

User's Manual

![Green computer motherboard with various slots, CPU socket, and RAM slots (no visible text or labels)](.imb-m43-50-1x014-1000-200-en/bc97d190d52dbb7439125551f9672735cfbd382f8cf2e8750697629d64dbf547.jpg)

Manual Rev.: 2.00

Revision Date: July 22, 2016

Part No: 50-1X014-1000

Revision History

<table><tr><td>Revision</td><td>Release Date</td><td>Description of Change(s)</td></tr><tr><td>2.00</td><td>July 22, 2016</td><td>Initial Release</td></tr></table>

# Preface

# Copyright 2016 ADLINK Technology, Inc.

This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

# Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

# Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.

# Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

# Conventions

Take note of the following conventions used throughout this manual to make sure that users perform certain tasks and instructions properly.

![The image shows a white document icon with a folded top-left corner and horizontal grey lines. Overlaid on the document is a large, bold red checkmark.](.imb-m43-50-1x014-1000-200-en/48ad356fac852bf37c8ed64cc02ac7e4003f13303b245f13d84b33f788743661.jpg)
NOTE:

Additional information, aids, and tips that help users perform tasks.

![A yellow triangular warning sign with a black border containing a black exclamation point in the center.](.imb-m43-50-1x014-1000-200-en/b1275d87e6ba47d5eb2c0c1524b8fd61b209fa7a28ee641b6aa47e91c6f0a9e2.jpg)
CAUTION:

Information to prevent minor physical injury, component damage, data loss, and/or program corruption when trying to complete a task.

![The image displays a red triangular warning symbol. Inside the triangle is a white exclamation mark. Below the triangle is a white horizontal line.](.imb-m43-50-1x014-1000-200-en/32220d8218650024295c2a50a0df24d39090f38acce0e3f33484a4f260bad6b9.jpg)
WARNING:

Information to prevent serious physical injury, component damage, data loss, and/or program corruption when trying to complete a specific task.

# Table of Contents

# Revision History...... ii

# Preface...... iii

# List of Figures ix

# List of Tables.... xi

# 1 Introduction ...... 1

1.1 Features.... 1
1.2 Specifications.... 2
1.3 Motherboard Topography 5
1.4 I/O Panel 7
1.5 Onboard Headers and Connectors.... 9

1.5.1 CN46 24-pin ATX Power Input Connector....9

1.5.2 CN44 System Panel Header 10

1.5.3 COM3 Serial Port Header.... 10

1.5.4 COM4 Serial Port Header.... 11

1.5.5 COM5 Serial Port Header.... 12

1.5.6 COM6 Serial Port Header.... 12

1.5.7 CN16 USB3.0 Header 13

1.5.8 CN14 USB2.0 Header 14

1.5.9 CN15 USB2.0 Header 15

1.5.10 CN38 Front Audio Header 15

1.5.11 FAN1 4-Pin CPU FAN Connector....17

1.5.12 FAN2 4-Pin System FAN1 Connector 17

1.5.13 FAN3 4-Pin System FAN2 Connector 18

1.5.14 CN54 LAN1 LED Indicator.... 18

1.5.15 CN53 LAN2 LED Indicator.... 19

1.5.16 PS2 Combo Connector.... 19

1.5.17 CN37 LPT Connector 20

# 2 Getting Started 23

2.1 Package Contents.... 23
2.2 Mounting the motherboard.... 24
2.3 Installing Memory Modules (DIMM) 24
2.4 Installing Expansion Cards (PCI and PCI Express)...... 26
2.5 Jumper Settings 27
2.6 Driver Installation 29

# A Appendix: UEFI Setup Utility 31

A.1 Introduction 31
A.2 UEFI Menu Bar 31
A.3 Navigation Keys 32
A.4 Main Menu 32
A.5 Advanced Menu 33

A.5.1 ACPI Settings 34
A.5.2 CPU Configuration....35
A.5.3 Chipset Configuration 38
A.5.4 System Agent (SA) Configuration....39
A.5.5 Graphics Configuration 40
A.5.6 PCI Express Configuration 41
A.5.7 USB Configuration 45
A.5.8 USB Configuration....48
A.5.9 HD Audio Configuration 49
A.5.10 SATA Configuration....50
A.5.11 Onboard Device Configuration 51
A.5.12 Advance Power Management....54
A.5.13 AMT Configuration....56
A.5.14 Intel® BIOS Guard Technology 57
A.5.15 Network Stack Configuration 58
A.5.16 CSM Configuration 59
A.5.17 NCT6106D HW Monitor....61
A.5.18 Miscellaneous Configuration....65

A.6 Security.... 66

A.6.1 Administrator Password....66

A.6.2 Secure Boot menu....67

A.7 Boot 68

A.8 Save & Exit 70

# Important Safety Instructions.... 73

# Getting Service.... 77

This page intentionally left blank.

# List of Figures

Figure 1-1: IMB-M43 Motherboard....5

Figure 1-2: IMB-M43 I/O Panel 7

Figure 1-3: LAN Port LED Indicators....8

This page intentionally left blank.

# List of Tables

Table 1-1: IMB-M43 Motherboard Legend....6
Table 1-2: IMB-M43 I/O Legend 7
Table 1-3: COM Port Pin Definitions....8
Table 1-4: LAN Port LED Legend 8
Table A-1: Navigation Key Functions 32

This page intentionally left blank.

# 1 Introduction

![A white document icon with a folded top-right corner and horizontal lines, featuring a large red checkmark overlaid.](.imb-m43-50-1x014-1000-200-en/3827da2c9a28e41fbd722b182236da1406abbfa694d05d3835e6b3c88bb4dfa0.jpg)
NOTE:

With specification and BIOS updates, the content of this manual is subject to change without notice. Updated versions, as well as the latest CPU support lists are available at http://www.adlinktech.com

For technical support, please visit http://askanexpert.adlink-tech.com/AAE/Answers.aspx for model-specific information.

# 1.1 Features

▶ ATX form factor (305 mm x 244 mm)
▶ 6th Generation Intel® Core™ i7/i5/i3/Pentium/Celeron processors in LGA1151 package support
▶ Dual-channel DDR4 2133MHz, 4x 288-pin DIMM sockets, up to 64GB non-ECC unbuffered DIMM support
▶ 1x PCIe x8 Gen3, 4x PCIe x4 Gen3, 2x PCI 2.2 slots (configurable)
Intel i219-LM Gigabit Ethernet PHY and Intel i211-AT Gigabit Ethernet controller
▶ 8x USB 3.0 ports/pin headers (6x rear, 2x pin headers), 6x USB 2.0 ports (2x vertical type A connector, 4x pin headers)
▶ 6x SATA 6 Gb/s ports
▶ 1x VGA, 2x DisplayPort, supporting up to 3 independent displays
▶ 6x COM ports/pin headers (2x rear, 4x onboard pin headers), COM1/2 supporting RS232/422/485/RS-485 w/ auto flow control
▶ Watchdog Timer, Hardware Monitor
▶ 1x 10-pin/2.54mm GPIO pin header: 4 in/4 out, one ground pin and one power pin (5V/12V/no power, jumper selected)
▶ 1x 25-pin/2.54mm printer port pin header
▶ 1x Mini-DIN for PS/2 keyboard/mouse
▶ RoHS compliance
▶ SEMA utility (optional, built to order)

# 1.2 Specifications

<table><tr><td colspan="2">Processor&amp; System</td></tr><tr><td>CPU</td><td>► Intel® CoreTM i7-6700, 3.4GHz, 8M Cache, 14nm, 65W TDP, LGA1151 (4C/8T)► Intel® CoreTM i7-6700TE, 2.4GHz 8M Cache, 14nm, 35W TDP, LGA1151 (4C/8T)► Intel® CoreTM i5-6500, 3.2GHz, 6M Cache, 14nm, 65W TDP, LGA1151 (4C/4T)► Intel® CoreTM i5-6500TE, 2.3GHz, 6M Cache, 14nm, 35W TDP, LGA1151 (4C/4T)► Intel® CoreTM i3-6100, 3.7GHz, 3M Cache, 14nm, 51W TDP, LGA1151 (2C/4T)► Intel® CoreTM i3-6100TE, 2.7GHz, 4M Cache, 14nm, 35W TDP, LGA1151 (2C/4T)► Intel® Pentium® G4400, 3.3GHz, 3M Cache, 14nm, 54W TDP, LGA1151 (2C/2T)► Intel® Pentium® G4400TE, 2.4GHz, 3M Cache, 14nm, 35W TDP, LGA1151 (2C/2T)► Intel® Celeron® G3900, 2.8GHz, 2M Cache, 14nm, 65W TDP, LGA1151 (2C/2T)► Intel® Celeron® G3900TE, 2.6GHz, 2M Cache, 14nm, 35W TDP, LGA1151 (2C/2T)</td></tr><tr><td>Chipset</td><td>Intel® Q170 Express</td></tr><tr><td rowspan="2">Memory</td><td>4x 288-pin DDR4 sockets (vertical)</td></tr><tr><td>Dual channel DDR4 2133 MHz, up to 64GB</td></tr><tr><td>BIOS</td><td>AMI®UEFI BIOS, 128 Mbit SPI flash memory</td></tr><tr><td>Watchdog Timer</td><td>24 to 65536 sec.software programmable, can execute system reset</td></tr><tr><td>Hardware Monitor</td><td>► CPU voltage► +3.3V voltage► +5V voltage► +12V voltage► CPU temperature► System temperature► CPU fan speed► System fan speed</td></tr><tr><td>OS</td><td>► Microsoft® Windows® 7 32/64-bit► Microsoft® Windows® 8.1 64-bit► Microsoft® Windows® 10 64-bit► Ubuntu 15.10 32/64-bit</td></tr><tr><td colspan="2">I/O</td></tr><tr><td rowspan="2">Serial ATA</td><td>6x SATA 6.0 Gb/s connectors</td></tr><tr><td>Software RAID support 0/1/5/10</td></tr><tr><td rowspan="4">USB</td><td>6x USB 3.0 connector (rear)</td></tr><tr><td>2x USB 3.0 pin header</td></tr><tr><td>4x USB2.0 pin headers</td></tr><tr><td>2x USB2.0 vertical type A connector</td></tr><tr><td rowspan="2">Serial Ports</td><td>2x RS-232/422/485 with auto flow control connector (rear)</td></tr><tr><td>4x RS-232 pin headers</td></tr><tr><td rowspan="3">Expansion Slots</td><td></td></tr><tr><td>► If PEG3 is occupied, PEG1 is PCIex8 Gen3,PEG2 is PCIex4 Gen3, and PEG3 is PCIex4Gen3► If PEG3 is not occupied and PEG2 is occupied,PEG1 is PCIex8 Gen3, PEG2 is PCIex8 Gen3,and PEG3 is no signal► If PEG3 is not occupied and PEG2 is not occu-pied, PEG1 is PCIex16 Gen3,PEG2 and PEG3 isno signal► PCIe1: PCIe x4 Gen3, PCIe2: PCIe x4 Gen3,PCI1: PCI 2.2, PCI2: PCI 2.2</td></tr><tr><td>► PEG1 PCIex16 slot► PCI1 PCI slot► PEG2 PCIex16 slot► PEG3 PCIex4 slot► PCIe1 PCIex4 slot► PCIe2 PCIex4 slot► PCI2 PCI slot</td></tr><tr><td>Parallel Port</td><td>1x LPT pin header</td></tr><tr><td>PS2 Combo Port</td><td>1x PS/2 keyboard &amp; mouse connector (rear)</td></tr><tr><td>DI/O</td><td>1x 10-pin/2.54mm GPIO pin header: 4 in and 4 out, one ground pin and one power pin (5V/12V/no power, jumper selected)</td></tr><tr><td colspan="2">Audio</td></tr><tr><td>Audio Codec</td><td>Realtek® ALC262-VC2-GR</td></tr><tr><td>Interface</td><td>1x Mic-in, 1x Line-out and 1x Line-in connector (rear)</td></tr><tr><td colspan="2">Graphics</td></tr><tr><td>Graphics Engine</td><td>Integrated Intel® HD graphics series (based on CPU)</td></tr><tr><td>VGA</td><td>1 VGA connector (rear), resolution up to 1920 x 1200@60Hz</td></tr><tr><td>DisplayPort 1.2</td><td>2 DP connector (rear), resolution up to 4096x2304 @ 60Hz</td></tr><tr><td colspan="2">Ethernet</td></tr><tr><td rowspan="2">Controller</td><td>LAN1: Intel® I219-LM via RJ45 connector (rear)</td></tr><tr><td>LAN2: Intel®I211-AT via RJ45 connector (rear)</td></tr><tr><td>Intel® AMT</td><td>LAN1 Support</td></tr><tr><td>Wake On LAN</td><td>LAN1 and LAN2 support</td></tr><tr><td colspan="2">Mechanical and Environmental</td></tr><tr><td>Form Factor</td><td>ATX</td></tr><tr><td>Dimensions</td><td>305 mm x 244 mm (WxL)</td></tr><tr><td>Operating Temperature</td><td>0°C to 60°C</td></tr><tr><td>Storage Temperature</td><td>-20°C to 80°C</td></tr><tr><td>Relative Humidity</td><td>10% to 90, non-condensing</td></tr><tr><td>Certification</td><td>CE &amp; FCC Class B</td></tr></table>

# 1.3 Motherboard Topography

![T U V W X Y Z\nAA S\nR\nBB Q\nCC P\nDD O\nN J\nM L K I\nH G F E D C\nA\nB](.imb-m43-50-1x014-1000-200-en/e2e69f1db89a7ed3f23885588537df4c6de0949f75e395850d0c4d0a319b0f92.jpg)

Figure 1-1: IMB-M43 Motherboard

<table><tr><td>A</td><td>FAN2</td><td>4-pin system FAN1 connector</td></tr><tr><td>B</td><td>FAN1</td><td>4-pin CPU FAN connector</td></tr><tr><td>C</td><td>SATA3/4</td><td>Upper: SATA3Lower: SATA4</td></tr><tr><td>D</td><td>SATA1/2</td><td>Upper: SATA1Lower: SATA2</td></tr><tr><td>E</td><td>SATA5/6</td><td>Upper: SATA5Lower: SATA6</td></tr><tr><td>F</td><td>FAN3</td><td>4-pin system FAN2 connector</td></tr><tr><td>G</td><td>CN23</td><td>Digital I/O pin header</td></tr><tr><td>H</td><td>CN22</td><td>GPI/O port power select</td></tr></table>

<table><tr><td>I</td><td>CN44</td><td>System panel header</td></tr><tr><td>J</td><td>CN14</td><td>USB2.0 header (USB2.0 port 7/8)</td></tr><tr><td>K</td><td>CN50</td><td>USB2.0 connector(USB2.0 port 14)</td></tr><tr><td>L</td><td>CN49</td><td>USB2.0 connector(USB2.0 port 13)</td></tr><tr><td>M</td><td>CN15</td><td>USB2.0 header (USB2.0 port 9/10)</td></tr><tr><td>N</td><td>CN16</td><td>USB3.0 header (USB3.0 port 7/8, USB2.0 port 5/6)</td></tr><tr><td>O</td><td>CN37</td><td>Printer port header</td></tr><tr><td>P</td><td>COM6</td><td>Serial port 6</td></tr><tr><td>Q</td><td>COM5</td><td>Serial port 5</td></tr><tr><td>R</td><td>COM4</td><td>Serial port 4</td></tr><tr><td>S</td><td>COM3</td><td>Serial port 3</td></tr><tr><td>T</td><td>PCI2</td><td>PCI connector</td></tr><tr><td>U</td><td>PCIe2</td><td>PCIe x4 connector</td></tr><tr><td>V</td><td>PCIe1</td><td>PCIe x4 connector</td></tr><tr><td>W</td><td>PEG3</td><td>PCIe x4 connector</td></tr><tr><td>X</td><td>PEG2</td><td>PCIe x16 connector</td></tr><tr><td>Y</td><td>PCI1</td><td>PCI connector</td></tr><tr><td>Z</td><td>PEG1</td><td>PCIe x16 connector</td></tr><tr><td>AA</td><td>CN31</td><td>Serial port 3 power select</td></tr><tr><td>BB</td><td>CN32</td><td>Serial port 4 power select</td></tr><tr><td>CC</td><td>CN35</td><td>Serial port 5 power select</td></tr><tr><td>DD</td><td>CN36</td><td>Serial port 6 power select</td></tr><tr><td>EE</td><td>CN24</td><td>Clear CMOS header</td></tr></table>

Table 1-1: IMB-M43 Motherboard Legend

# 1.4 I/O Panel

![A\nB\nC\nD\nE\nF\nG\nH\nQ\nP\nO\nN\nM\nL\nK\nJ\nI](.imb-m43-50-1x014-1000-200-en/a7565f3182648ceeee683f648af745510eeb9d8a94c716c9fac68fd2b3597435.jpg)

Figure 1-2: IMB-M43 I/O Panel

<table><tr><td>A</td><td>VGA</td><td>J</td><td>USB3.0 (#4)USB2.0(#4)</td></tr><tr><td>B</td><td>COM1</td><td>K</td><td>USB3.0 (#1)USB2.0(#1)</td></tr><tr><td>C</td><td>PS2 Combo</td><td>L</td><td>USB3.0 (#2)USB2.0(#2)</td></tr><tr><td>D</td><td>LAN1</td><td>M</td><td>USB3.0 (#5)USB2.0(#11)</td></tr><tr><td>E</td><td>LAN2</td><td>N</td><td>USB3.0 (#6)USB2.0(#12)</td></tr><tr><td>F</td><td>Line In</td><td>O</td><td>COM2</td></tr><tr><td>G</td><td>Line Out</td><td>P</td><td>DP2</td></tr><tr><td>H</td><td>Mic In</td><td rowspan="2">Q</td><td rowspan="2">DP1</td></tr><tr><td>I</td><td>USB3.0 (#3)USB2.0(#3)</td></tr></table>

Table 1-2: IMB-M43 I/O Legend

The IMB-M43 supports RS232/422/485 on COM ports 1 and 2, with pin definitions as follows, with both COM ports configurable in BIOS setup.

<table><tr><td>Pin</td><td>RS232</td><td>RS422</td><td>RS485</td></tr><tr><td>1</td><td>DCD, Data Carrier Detect</td><td>TX-</td><td>Data-</td></tr><tr><td>2</td><td>RXD, Receive Data</td><td>TX+</td><td>Data+</td></tr><tr><td>3</td><td>TXD, Transmit Data</td><td>RX+</td><td>N/A</td></tr></table>

<table><tr><td>Pin</td><td>RS232</td><td>RS422</td><td>RS485</td></tr><tr><td>4</td><td>DTR, Data Terminal Ready</td><td>RX-</td><td>N/A</td></tr><tr><td>5</td><td>GND</td><td>GND</td><td>GND</td></tr><tr><td>6</td><td>DSR, Data Set Ready</td><td>N/A</td><td>N/A</td></tr><tr><td>7</td><td>RTS, Request To Send</td><td>N/A</td><td>N/A</td></tr><tr><td>8</td><td>CTS, Clear To Send</td><td>N/A</td><td>N/A</td></tr><tr><td>9</td><td>RI, Ring Pin</td><td>N/A</td><td>N/A</td></tr></table>

Table 1-3: COM Port Pin Definitions

Two LEDs on either side of the RJ-45 LAN port indicate activity and speed as follows.

![SPEED\nACT/LINK](.imb-m43-50-1x014-1000-200-en/f79062787d9a81ccb93c5203ec98635d66aa0243849f7ece0f5497b0b9c6fa48.jpg)

Figure 1-3: LAN Port LED Indicators

<table><tr><td colspan="2">ACT/LINK</td></tr><tr><td>Off</td><td>No Link</td></tr><tr><td>Blinking</td><td>Transmission Underway</td></tr><tr><td>Lit</td><td>Link</td></tr></table>

<table><tr><td colspan="2">SPEED</td></tr><tr><td>Off</td><td>10 Mb/s</td></tr><tr><td>Green</td><td>100 Mb/s</td></tr><tr><td>Orange</td><td>1 Gb/s</td></tr></table>

Table 1-4: LAN Port LED Legend

# 1.5 Onboard Headers and Connectors

![This image displays a standard hazard warning sign. It features a yellow triangle with a thick black border containing a large black exclamation point in the center. Below the triangle, the word 'CAUTION:' is written in bold, black capital letters.](.imb-m43-50-1x014-1000-200-en/c496c87880664de2901df96031b89f11d6c764afe26d8c8161e77a902c529618.jpg)

Placing jumper covers over headers and connectors may cause permanent damage.

# 1.5.1 CN46 24-pin ATX Power Input Connector

<table><tr><td></td><td>Pin</td><td>Name</td></tr><tr><td rowspan="24">&lt;img src="images/a3a66ca237ae97b7494c87794ca059fedcbe7d94164a44152e40e5d624a69fb6.jpg"/&gt;</td><td>1</td><td>P_+3V3_PSU</td></tr><tr><td>2</td><td>P_+3V3_PSU</td></tr><tr><td>3</td><td>GND</td></tr><tr><td>4</td><td>P_+5V_PSU</td></tr><tr><td>5</td><td>GND</td></tr><tr><td>6</td><td>P_+5V_PSU</td></tr><tr><td>7</td><td>GND</td></tr><tr><td>8</td><td>PSU_PWROK</td></tr><tr><td>9</td><td>P_+5VSB_PSU</td></tr><tr><td>10</td><td>P_+12V_PSU_CN</td></tr><tr><td>11</td><td>P_+12V_PSU_CN</td></tr><tr><td>12</td><td>P_+3V3_PSU</td></tr><tr><td>13</td><td>P_+3V3_PSU</td></tr><tr><td>14</td><td>P_N12V_PSU</td></tr><tr><td>15</td><td>GND</td></tr><tr><td>16</td><td>PS_ON-L</td></tr><tr><td>17</td><td>GND</td></tr><tr><td>18</td><td>GND</td></tr><tr><td>19</td><td>GND</td></tr><tr><td>20</td><td>PS_TP1(Test pad)</td></tr><tr><td>21</td><td>P_+5V_PSU</td></tr><tr><td>22</td><td>P_+5V_PSU</td></tr><tr><td>23</td><td>P_+5V_PSU</td></tr><tr><td>24</td><td>GND</td></tr></table>

# 1.5.2 CN44 System Panel Header

![2\n10\n□ □ □ □ □\n□ □ □ □ □\n1\n9](.imb-m43-50-1x014-1000-200-en/03c1560c8227dcee4b2dd0999aefeb0026d9bffcab0a2fd1588824bdbb0c9f7d.jpg)

<table><tr><td>Pin</td><td>Name</td></tr><tr><td>1</td><td>CN_HDLED+</td></tr><tr><td>2</td><td>CN_PLED+</td></tr><tr><td>3</td><td>CN_HDLED-</td></tr><tr><td>4</td><td>CN_PLED-</td></tr><tr><td>5</td><td>GND</td></tr><tr><td>6</td><td>CN_PWRBTN-L</td></tr><tr><td>7</td><td>CN_RESETBTN-L</td></tr><tr><td>8</td><td>GND</td></tr><tr><td>9</td><td>NC</td></tr><tr><td>10</td><td>NC</td></tr></table>

# 1.5.3 COM3 Serial Port Header

![2\n1\n8\n9](.imb-m43-50-1x014-1000-200-en/2a554b5da2477acb3866959888c05fc72c91dc2234384a942b84df84fe018ed8.jpg)

<table><tr><td>Pin</td><td>Name</td></tr><tr><td>1</td><td>CN_COM-C_DCD-L</td></tr><tr><td>2</td><td>CN_COM-C_DSR-L</td></tr><tr><td>3</td><td>CN_COM-C_RX</td></tr><tr><td>4</td><td>CN_COM-C_RTS-L</td></tr><tr><td>5</td><td>CN_COM-C_TX</td></tr><tr><td>6</td><td>CN_COM-C_CTS-L</td></tr><tr><td>7</td><td>CN_COM-C_DTR-L</td></tr><tr><td>8</td><td>CN_COM-C_POWER</td></tr><tr><td>9</td><td>GND</td></tr><tr><td>10</td><td>NC</td></tr></table>

# 1.5.4 COM4 Serial Port Header

![2\n1\n8\n9](.imb-m43-50-1x014-1000-200-en/1c705005f8211861fa1acba4e58eabcd514af9e5275cebd99fddd332075e5e95.jpg)

<table><tr><td>Pin</td><td>Name</td></tr><tr><td>1</td><td>CN_COM-D_DCD-L</td></tr><tr><td>2</td><td>CN_COM-D_DSR-L</td></tr><tr><td>3</td><td>CN_COM-D_RX</td></tr><tr><td>4</td><td>CN_COM-D_RTS-L</td></tr><tr><td>5</td><td>CN_COM-D_TX</td></tr><tr><td>6</td><td>CN_COM-D_CTS-L</td></tr><tr><td>7</td><td>CN_COM-D_DTR-L</td></tr><tr><td>8</td><td>CN_COM-D_POWER</td></tr><tr><td>9</td><td>GND</td></tr><tr><td>10</td><td>NC</td></tr></table>

# 1.5.5 COM5 Serial Port Header

![2\n1\n8\n9](.imb-m43-50-1x014-1000-200-en/c45ad44ab90b73fb593e155e6d207e5496f82063748beb598c62aa1a340e482f.jpg)

<table><tr><td>Pin</td><td>Name</td></tr><tr><td>1</td><td>CN_COM-E_DCD-L</td></tr><tr><td>2</td><td>CN_COM-E_DSR-L</td></tr><tr><td>3</td><td>CN_COM-E_RX</td></tr><tr><td>4</td><td>CN_COM-E_RTS-L</td></tr><tr><td>5</td><td>CN_COM-E_TX</td></tr><tr><td>6</td><td>CN_COM-E_CTS-L</td></tr><tr><td>7</td><td>CN_COM-E_DTR-L</td></tr><tr><td>8</td><td>CN_COM-E_POWER</td></tr><tr><td>9</td><td>GND</td></tr><tr><td>10</td><td>NC</td></tr></table>

# 1.5.6 COM6 Serial Port Header

![2\n1\n8\n9](.imb-m43-50-1x014-1000-200-en/3bf99a1c25c455e30e169ee454307bad0f833b7783c65a1cbbb842424d25d2b5.jpg)

<table><tr><td>Pin</td><td>Name</td></tr><tr><td>1</td><td>CN_COM-F_DCD-L</td></tr><tr><td>2</td><td>CN_COM-F_DSR-L</td></tr><tr><td>3</td><td>CN_COM-F_RX</td></tr><tr><td>4</td><td>CN_COM-F_RTS-L</td></tr><tr><td>5</td><td>CN_COM-F_TX</td></tr><tr><td>6</td><td>CN_COM-F_CTS-L</td></tr><tr><td>7</td><td>CN_COM-F_DTR-L</td></tr><tr><td>8</td><td>CN_COM-F_POWER</td></tr><tr><td>9</td><td>GND</td></tr><tr><td>10</td><td>NC</td></tr></table>

# 1.5.7 CN16 USB3.0 Header

![Pure architectural floor plan outline with grid layout and dimension labels (1 and 20), no text or symbols beyond annotations](.imb-m43-50-1x014-1000-200-en/667441ee35684130d722a5ebaf7399b891bb36b62128dd8653774c3fb38ef6a4.jpg)

<table><tr><td>Pin</td><td>Name</td></tr><tr><td>1</td><td>P_+5V_USB_VBUS_P9</td></tr><tr><td>2</td><td>CN_U3_USB3_RXN_7</td></tr><tr><td>3</td><td>CN_U3_USB3_RXP_7</td></tr><tr><td>4</td><td>GND</td></tr><tr><td>5</td><td>CN_U3_USB3_TXN_7</td></tr><tr><td>6</td><td>CN_U3_USB3_TXP_7</td></tr><tr><td>7</td><td>GND</td></tr><tr><td>8</td><td>CN_U2_USB2N_5</td></tr><tr><td>9</td><td>CN_U2_USB2P_5</td></tr><tr><td>10</td><td>NC</td></tr><tr><td>11</td><td>CN_U2_USB2P_6</td></tr><tr><td>12</td><td>CN_U2_USB2N_6</td></tr><tr><td>13</td><td>GND</td></tr><tr><td>14</td><td>CN_U3_USB3_TXP_8</td></tr><tr><td>15</td><td>CN_U3_USB3_TXN_8</td></tr><tr><td>16</td><td>GND</td></tr><tr><td>17</td><td>CN_U3_USB3_RXP_8</td></tr><tr><td>18</td><td>CN_U3_USB3_RXN_8</td></tr><tr><td>19</td><td>P_+5V_USB_VBUS_P10</td></tr><tr><td>20</td><td>NC</td></tr></table>

# 1.5.8 CN14 USB2.0 Header

![2\n1\n10](.imb-m43-50-1x014-1000-200-en/c2d1ae3580ea2acd4fffa45c5d9ecf7d078b387ef98c372cfcbd87a40d5c4ff0.jpg)

<table><tr><td>Pin</td><td>Name</td></tr><tr><td>1</td><td>P_+5V_USB_VBUS_P6</td></tr><tr><td>2</td><td>P_+5V_USB_VBUS_P5</td></tr><tr><td>3</td><td>CN_U2_USB2N_7</td></tr><tr><td>4</td><td>CN_U2_USB2N_8</td></tr><tr><td>5</td><td>CN_U2_USB2P_7</td></tr><tr><td>6</td><td>CN_U2_USB2P_8</td></tr><tr><td>7</td><td>GND</td></tr><tr><td>8</td><td>GND</td></tr><tr><td>9</td><td>X</td></tr><tr><td>10</td><td>NC</td></tr></table>

# 1.5.9 CN15 USB2.0 Header

![2\n1\n10](.imb-m43-50-1x014-1000-200-en/276b5f530910ae03812040c84814593221e024541486d9066d3b67d580bb53d2.jpg)

<table><tr><td>Pin</td><td>Name</td></tr><tr><td>1</td><td>P_+5V_USB_VBUS_P7</td></tr><tr><td>2</td><td>P_+5V_USB_VBUS_P8</td></tr><tr><td>3</td><td>CN_U2_USB2N_9</td></tr><tr><td>4</td><td>CN_U2_USB2N_10</td></tr><tr><td>5</td><td>CN_U2_USB2P_9</td></tr><tr><td>6</td><td>CN_U2_USB2P_10</td></tr><tr><td>7</td><td>GND</td></tr><tr><td>8</td><td>GND</td></tr><tr><td>9</td><td>X</td></tr><tr><td>10</td><td>NC</td></tr></table>

# 1.5.10 CN38 Front Audio Header

2

10

![Simple diagram of a rectangle containing 12 empty squares arranged in two rows (no text or symbols)](.imb-m43-50-1x014-1000-200-en/21ba89748cb32d222c4e6c3b3f0d4a590444cb1322fb62d0102f9a22e5b671d6.jpg)

1

9

<table><tr><td>Pin</td><td>Name</td></tr><tr><td>1</td><td>A_MIC2_IN_L</td></tr><tr><td>2</td><td>GND_AUD</td></tr><tr><td>3</td><td>A_MIC2_IN_R</td></tr><tr><td>4</td><td>CN_FP_PRES-L</td></tr><tr><td>5</td><td>A_L_OUT2_R</td></tr><tr><td>6</td><td>CN_SRTN1</td></tr><tr><td>7</td><td>A_HP2_JD</td></tr><tr><td>8</td><td>NC</td></tr><tr><td>9</td><td>A_L_OUT2_L</td></tr><tr><td>10</td><td>CN_SRTN2</td></tr></table>

# 1.5.11 FAN1 4-Pin CPU FAN Connector

![4\n1](.imb-m43-50-1x014-1000-200-en/170f035aa68ceac0da2366f9efc928b968d8e051304948e8462298d81c94d5a6.jpg)

<table><tr><td>Pin</td><td>Name</td><td>Note</td></tr><tr><td>1</td><td>GND</td><td>GND</td></tr><tr><td>2</td><td>P_+12V_PSU</td><td>FAN-Power</td></tr><tr><td>3</td><td>O_CPUFAN_IN/BMC_FAN_IN_CPU</td><td>FAN-TACHO</td></tr><tr><td>4</td><td>O_CPUFAN_OUT/BMC_FAN_OUT_CPU</td><td>FAN-PWM IN</td></tr></table>

# 1.5.12 FAN2 4-Pin System FAN1 Connector

![4\n1](.imb-m43-50-1x014-1000-200-en/b4737d3debc871f3c69590d683e09793f853d1e1d346e25ce6d80e5c837738c7.jpg)

<table><tr><td>Pin</td><td>Name</td><td>Note</td></tr><tr><td>1</td><td>GND</td><td>GND</td></tr><tr><td>2</td><td>P_+12V_PSU</td><td>FAN-Power</td></tr><tr><td>3</td><td>O_SYSFAN_IN0/BMC_FAN_IN</td><td>FAN-TACHO</td></tr><tr><td>4</td><td>O_SYSFAN_OUT0/BMC_FAN_OUT</td><td>FAN-PWM IN</td></tr></table>

# 1.5.13 FAN3 4-Pin System FAN2 Connector

![Pure technical diagram of a mechanical component with four mounting holes and labeled parts 1, 4 (no text or symbols beyond labels)](.imb-m43-50-1x014-1000-200-en/9a9021d0f5e522990306dd81ecc087886bbb0ab8500873f1cbe18bb704c7a370.jpg)

<table><tr><td>Pin</td><td>Name</td><td>Note</td></tr><tr><td>1</td><td>GND</td><td>GND</td></tr><tr><td>2</td><td>P_+12V_PSU</td><td>FAN-Power</td></tr><tr><td>3</td><td>O_SYSFAN_IN1/BMC_FAN_IN1</td><td>FAN-TACHO</td></tr><tr><td>4</td><td>O_SYSFAN_OUT1/BMC_FAN_OUT1</td><td>FAN-PWM IN</td></tr></table>

# 1.5.14 CN54 LAN1 LED Indicator

![1\n□\n□\n2](.imb-m43-50-1x014-1000-200-en/c77be6e254316e12a9d7cea13ec1a4af1a86d0adbe0c6a365c05e7425a1b9279.jpg)

<table><tr><td colspan="2">LAN1 Link with Activity LED Header</td></tr><tr><td>1</td><td>P_+3V3_LAN_A</td></tr><tr><td>2</td><td>L_i219_LED0_LINK/ACT-L</td></tr></table>

# 1.5.15 CN53 LAN2 LED Indicator

![1\n□\n□\n2](.imb-m43-50-1x014-1000-200-en/a89ff5ff617d10844560c969487cba8aa7565f04fee5b3c4fbba9dc41e91ee02.jpg)

<table><tr><td colspan="2">LAN1 Link with Activity LED Header</td></tr><tr><td>1</td><td>P_+3V3_LAN_A</td></tr><tr><td>2</td><td>L_i210_LED1_LINK/ACT-L</td></tr></table>

# 1.5.16 PS2 Combo Connector

![6\n4\n2 1\n5\n3](.imb-m43-50-1x014-1000-200-en/dea8751db57a24d9df41c989279fd973ca2e1f919f57754fac5155d867f55c97.jpg)

<table><tr><td>Pin</td><td>Name</td><td>Note</td></tr><tr><td>1</td><td>O_KBDATA</td><td></td></tr><tr><td>2</td><td>O_MSDATA</td><td></td></tr><tr><td>3</td><td>GND</td><td></td></tr><tr><td>4</td><td>P_+PS2</td><td>Power source from P_+5V_DUAL</td></tr><tr><td>5</td><td>O_KBCLK</td><td></td></tr><tr><td>6</td><td>O_MSCLK</td><td></td></tr></table>

# 1.5.17 CN37 LPT Connector

![1\n26\n2\n2](.imb-m43-50-1x014-1000-200-en/abc4da6d34180a228219ff2b4f43230d33b63425b2a25344633144ebc373af87.jpg)

<table><tr><td>Pin</td><td>Name</td></tr><tr><td>1</td><td>O_STB-L_CON</td></tr><tr><td>2</td><td>O_AFD-L_CON</td></tr><tr><td>3</td><td>O_PD0_CON</td></tr><tr><td>4</td><td>O_ERR-L_CON</td></tr><tr><td>5</td><td>O_PD1_CON</td></tr><tr><td>6</td><td>O_INIT-L_CON</td></tr><tr><td>7</td><td>O_PD2_CON</td></tr><tr><td>8</td><td>O_SLIN-L_CON</td></tr><tr><td>9</td><td>O_PD3_CON</td></tr><tr><td>10</td><td>GND</td></tr><tr><td>11</td><td>O_PD4_CON</td></tr><tr><td>12</td><td>GND</td></tr><tr><td>13</td><td>O_PD5_CON</td></tr><tr><td>14</td><td>GND</td></tr><tr><td>15</td><td>O_PD6_CON</td></tr><tr><td>16</td><td>GND</td></tr><tr><td>17</td><td>O_PD7_CON</td></tr><tr><td>18</td><td>GND</td></tr><tr><td>19</td><td>O_ACK-L_CON</td></tr><tr><td>20</td><td>GND</td></tr><tr><td>21</td><td>O_BUSY_CON</td></tr><tr><td>22</td><td>GND</td></tr><tr><td>23</td><td>O_PE_CON</td></tr><tr><td>24</td><td>GND</td></tr><tr><td>25</td><td>O_SLCT_CON</td></tr><tr><td>26</td><td>NC</td></tr></table>

This page intentionally left blank.

# 2 Getting Started

# 2.1 Package Contents

Before unpacking, check the shipping carton for any damage. If the shipping carton and/or contents are damaged, inform your dealer immediately. Retain the shipping carton and packing materials for inspection. Obtain authorization from the dealer before returning any product to ADLINK.

▶ IMB-M43 ATX industrial motherboard

▶ I/O shield

![The image displays a warning sign featuring a dark red triangle containing a white exclamation point in the center. Directly beneath the triangle is the text 'WARNING:' printed in black capital letters on a white background.](.imb-m43-50-1x014-1000-200-en/c7da74a7aeb76d3c701ac294ae6d638c201c10762cb7a25afb4607377441ac7b.jpg)

The IMB-M43 must be protected from static discharge and physical shock. Never remove any of the socketed parts except at a static-free workstation.
▶ Ensure the power supply is disconnected before installing or removing the motherboard to avoid physical injury and device damage
▶ To avoid damage from static electricity, never place the motherboard directly on carpet or similar surfaces
▶ Wear a grounded wrist strap when handling components
▶ Hold components by the edges and do not touch ICs
▶ Place uninstalled components on a grounded antistatic pad or the antistatic bag shipped with the component

# 2.2 Mounting the motherboard

Mount the motherboard to the chassis with screws through the provided screw holes.

![The image shows a triangular warning sign with a yellow background and a thick black border. Inside the triangle is a large black exclamation point. Below the triangle, on a white background, the text 'CAUTION:' appears in black capital letters.](.imb-m43-50-1x014-1000-200-en/cf9728dfefb3094cd6eb64e3809f285528729a2f7ec2856ee788471f70e264da.jpg)

Avoid over-tightening screws to prevent PCB damage.

# 2.3 Installing Memory Modules (DIMM)

The IMB-M43 provides four 288-pin DDR4 DIMM slots supporting Dual Channel Memory technology.

![The image displays a white document icon with a folded top-right corner and faint horizontal lines. A large red checkmark is superimposed over the document.](.imb-m43-50-1x014-1000-200-en/a8b2bfd7157814821317d35d02a32e9b6471a80d32a3d8bf7ec62aca5d85d69d.jpg)
NOTE:

▶ Dual channel configuration requires installation of DDR4 DIMM pairs of identical brand, speed, size, and chip type.
▶ Dual Channel Memory technology is disabled when only one memory module is installed.

![The image displays a yellow triangular warning sign with a black border. Inside the triangle is a large black exclamation mark. A sliver of white background is visible at the very top edge.](.imb-m43-50-1x014-1000-200-en/620d5eafdc103b3157d3d3cb922ae94bd73f874fa85bd68f34fd42a34363f3ca.jpg)
CAUTION:

▶ DDR, DDR2 or DDR3 memory modules cannot be installed in a DDR4 slot; motherboard and DIMM damage may result.
▶ Permanent damage to the motherboard and DIMM will result if the DIMM is forced into the slot in an incorrect orientation.

Install DRAM before installing add-on cards.

Remove add-on cards before removing any DRAM.

To install a memory module:

1. Locate the DIMM slots on the motherboard.

2. Press the slot's retaining clips outward to unlock.

![Isometric line drawing of a mechanical support structure with red arrows indicating motion direction (no text or symbols)](.imb-m43-50-1x014-1000-200-en/430e8f53416e57e9e08b78388c0119ea12e122e37dda41b895ed3a67fff5c243.jpg)

3. Align the memory module on the socket, making sure that the module notch matches the slot rail.

![Technical diagram showing a mechanical assembly with labeled components and directional arrows indicating assembly steps.](.imb-m43-50-1x014-1000-200-en/b88d9251a01eb0db4de8db5a5840534b04a2b3cc7c5ee9e1db4519772182d197.jpg)

4. Insert the module firmly into the slot until the retaining clips snap back inwards and the module is securely seated.

![Isometric line drawing of a mechanical component with multiple rectangular slots and directional arrows indicating motion (no text or symbols)](.imb-m43-50-1x014-1000-200-en/605c503f92984c507b1e9e8cbc67982d98565b7555d50d29412787a2ec0fe2b0.jpg)

# 2.4 Installing Expansion Cards (PCI and PCI Express)

The IMB-M43 provides:

▶ 2x PCI slots receiving expansion cards with 32-bit PCI interface.
▶ If PEG3 is occupied, PEG1 is PCIex8 Gen3, PEG2 is PCIex4 Gen3, and PEG3 is PCIex4 Gen3.
▶ If PEG3 is not occupied and PEG2 is occupied, PEG1 is PCIex8 Gen3, PEG2 is PCIex8 Gen3, and PEG3 is no signal.
▶ If PEG3 is not occupied and PEG2 is not occupied, PEG1 is PCIex16 Gen3, PEG2 and PEG3 is no signal.
▶ PCIe1: PCIe x4 Gen3
▶ PCIe2: PCIe x4 Gen3

Before installing expansion cards, ensure the power supply is switched off or disconnected. Check the card's documentation and perform requisite system configurations before installation.

1. Remove the system unit cover (if the motherboard is installed in a chassis).
2. Remove the bracket facing the destination slot.
3. Align the card connector with the slot and press firmly until the card is securely seated.
4. Fix the card to the chassis with screws.
5. Replace the system cover.

# 2.5 Jumper Settings

![The image displays a white document icon with a folded top-right corner and faint horizontal gray lines representing text. A large, bold red checkmark is superimposed over the center of the document.](.imb-m43-50-1x014-1000-200-en/c3682b43120129098cfa329c52bb0bf5ef2ccac65564cbe69f874ed389a36ebf.jpg)
NOTE:

\* denotes default setting

<table><tr><td>1-2</td><td>&lt;img src="images/cd2e42c55619af9ad4a26c22bf06b5db98324d60ca105bbabfdc764b0a7047f0.jpg"/&gt;</td></tr><tr><td>2-3</td><td>&lt;img src="images/3265aedac02098210b2229442bc7b741bdb895031712f73baa38606cddef6f16.jpg"/&gt;</td></tr></table>

# CN24

<table><tr><td colspan="2">Clear CMOS</td></tr><tr><td>*1-2</td><td>Normal</td></tr><tr><td>2-3</td><td>Clear CMOS</td></tr></table>

# CN25

<table><tr><td colspan="2">Clear ME</td></tr><tr><td>*1-2</td><td>Normal</td></tr><tr><td>2-3</td><td>Clear ME</td></tr></table>

# CN22

<table><tr><td colspan="2">GPIO Port Power Select</td></tr><tr><td>*N/A</td><td>No Power</td></tr><tr><td>1-2</td><td>P_+5V_PSU</td></tr><tr><td>2-3</td><td>P_+12V_PSU</td></tr></table>

# CN31

<table><tr><td colspan="2">Serial Port 3 Power Select</td></tr><tr><td>*N/A</td><td>No Power</td></tr><tr><td>1-2</td><td>P_+5V_PSU</td></tr><tr><td>2-3</td><td>P_+12V_PSU</td></tr></table>

# CN32

<table><tr><td colspan="2">Serial Port 4 Power Select</td></tr><tr><td>*N/A</td><td>No Power</td></tr><tr><td>1-2</td><td>P_+5V_PSU</td></tr><tr><td>2-3</td><td>P_+12V_PSU</td></tr></table>

# CN35

<table><tr><td colspan="2">Serial Port 5 Power Select</td></tr><tr><td>*N/A</td><td>No Power</td></tr><tr><td>1-2</td><td>P_+5V_PSU</td></tr><tr><td>2-3</td><td>P_+12V_PSU</td></tr></table>

# CN36

<table><tr><td colspan="2">Serial Port 6 Power Select</td></tr><tr><td>*N/A</td><td>No Power</td></tr><tr><td>1-2</td><td>P_+5V_PSU</td></tr><tr><td>2-3</td><td>P_+12V_PSU</td></tr></table>

# 2.6 Driver Installation

Download the requisite drivers for your system from http://www.adlinktech.com and install.

This page intentionally left blank.

# Appendix A - UEFI Setup Utility

# A.1 Introduction

This section explains how to use the UEFI Setup Utility to configure your system. The UEFI chip on the motherboard stores the UEFI Setup Utility. Select &lt;Del&gt; during the Power-On-Self-Test (POST) to enter the UEFI Setup Utility, otherwise, POST will continue with its test routines.

To enter the UEFI Setup Utility after POST, restart the system by pressing &lt;Ctl&gt; + &lt;Alt&gt; + &lt;Delete&gt;, or by pressing the reset button on the system chassis.

![The image displays a white document icon with a folded upper-right corner. Faint grey horizontal lines are visible on the page, suggesting text. A large, bold red checkmark is overlaid on top of the document.](.imb-m43-50-1x014-1000-200-en/b89bb22aea811de266a5efdae5b352a4ae227663b3690aac4d4599b189092e48.jpg)
NOTE:

Because the UEFI software is frequently updated, the setup screens and descriptions provided are for reference only, and may not conform exactly with those displayed.

# A.2 UEFI Menu Bar

The top of the screen has a menu bar with the following selections:

<table><tr><td>Main</td><td>Configures system time/date information</td></tr><tr><td>Advanced</td><td>Sets up advanced UEFI features</td></tr><tr><td>H/W Monitor</td><td>Displays current hardware status</td></tr><tr><td>Boot</td><td>Sets default system device to locate and load OS</td></tr><tr><td>Security</td><td>Sets up security features</td></tr><tr><td>Exit</td><td>Exits the current screen or UEFI Setup Utility</td></tr></table>

Use arrow keys to choose among the selections on the menu bar, and select Enter to access the sub screen. The mouse can also be used to select items

# A.3 Navigation Keys

<table><tr><td>Key(s)</td><td>Function</td></tr><tr><td>R/L Arrow</td><td>Moves cursor left or right to select Menus</td></tr><tr><td>U/D Arrow</td><td>Moves cursor up or down to select items</td></tr><tr><td>+/-</td><td>Changes option for the selected item</td></tr><tr><td>Enter</td><td>Opens the selected Menu</td></tr><tr><td>F1</td><td>Displays General Help</td></tr><tr><td>F2</td><td>Previous values</td></tr><tr><td>F3</td><td>Optimized default values for all settings</td></tr><tr><td>F4</td><td>Saves changes and exits Setup</td></tr><tr><td>ESC</td><td>Opens the Exit Menu or exits the current screen</td></tr></table>

Table A-1: Navigation Key Functions

# A.4 Main Menu

When UEFI Setup is started, the Main menu appears, displaying system overview.

![Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.\nMain Advanced Security Boot Save & Exit\nBIOS Information\nBIOS Vendor American Megatrends\nCore Version 5.11\nCompliancy UEFI 2.4: PI 1.3\nProject Version IMB-M43 1.11.10\nBuild Date and Time 12/15/2015 18:15:30\nAccess Level Administrator\nProcessor Information\nName SkyLake DT\nBrand String Intel(R) Core(TM)\n15-6500TE CPU @ 2.30GHz\nFrequency 2300 MHz\nProcessor ID 506E3\nStepping R0/S0/N0\nNumber of Processors 4Core(s) / 4Thread(s)\nMicrocode Revision 49\nGT Info GT2 (1000 MHz)\nIGFX VBIOS Version 1030\nMemory RC Version 1.7.0.0\nTotal Memory 4096 MB\nMemory Frequency 2133 MHz\nPCH Information\nChoose the system default language\n++: Select Screen\nT1: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit\nVersion 2.17.1255, Copyright (C) 2015 American Megatrends, Inc.](.imb-m43-50-1x014-1000-200-en/ed33d9a3933fb55176ab55c206aaa188df606c1dd8b6a966fef14ee2d2551b55.jpg)

# A.5 Advanced Menu

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.Main Advanced Security Boot Save &amp; Exit</td></tr><tr><td>ACPI SettingsCPU ConfigurationMemory ConfigurationSystem Agent (SA) ConfigurationGraphics ConfigurationPCI Express ConfigurationUSB ConfigurationHD Audio ConfigurationSATA ConfigurationOnboard devices configurationAdvanced Power ManagementAMT ConfigurationIntel(R) Bios Guard TechnologyNetwork Stack ConfigurationCSM ConfigurationNCT6106D HW MonitorMiscellaneous Configuration</td><td>System ACPI Parameters.++: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF2: Previous ValuesF3: Optimized DefaultsF4: Save &amp; ExitESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

# A.5.1 ACPI Settings

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc. Advanced</td></tr><tr><td rowspan="2">ACPI Settings
Enable Hibernation [Enabled]
ACPI Sleep State [S3 (Suspend to RAM)]</td><td>Enables or Disables System ability to Hibernate (OS/S4 Sleep State). This option may be not effective with some OS.</td></tr><tr><td>+: Select Screen
1↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

# Enable Hibernation

Enables or Disables System ability to hibernate (OS/S4 Sleep State). This option may be not effective with some OS.

# ACPI Sleep State

Selects the highest ACPI sleep state the system will enter when the SUSPEND button is pressed.

# A.5.2 CPU Configuration

Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.

Advanced

CPU Configuration

Intel(R) Core(TM) i7-6700TE CPU @ 2.40GHz

CPU Signature 506E3

Microcode Patch 49

Max CPU Speed 2400 MHz

Min CPU Speed 800 MHz

CPU Speed 2400 MHz

Processor Cores 4

Hyper Threading Technology Supported

Intel VT-x Technology Supported

Intel SMX Technology Supported

64-bit Supported

EIST Technology Supported

CPU C3 state Supported

CPU C6 state Supported

CPU C7 state Supported

L1 Data Cache 32 kB x 4

L1 Code Cache 32 kB x 4

L2 Cache 256 KB x 4

L3 Cache 8 MB

L4 Cache Not Present

Hyper-threading [Enabled]

Enabled for Windows XP and Linux (OS optimized for Hyper-Threading Technology) and Disabled for other OS (OS not optimized for Hyper-Threading Technology). When Disabled only one thread per enabled core is enabled.

++: Select Screen

↑↓: Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC: Exit

Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.

Advanced

<table><tr><td>EIST Technology</td><td>Supported</td></tr><tr><td>CPU C3 state</td><td>Supported</td></tr><tr><td>CPU C6 state</td><td>Supported</td></tr><tr><td>CPU C7 state</td><td>Supported</td></tr><tr><td>L1 Data Cache</td><td>32 kB x 4</td></tr><tr><td>L1 Code Cache</td><td>32 kB x 4</td></tr><tr><td>L2 Cache</td><td>256 kB x 4</td></tr><tr><td>L3 Cache</td><td>8 MB</td></tr><tr><td>L4 Cache</td><td>Not Present</td></tr><tr><td>Hyper-threading</td><td>[Enabled]</td></tr><tr><td>Active Processor Cores</td><td>[All]</td></tr><tr><td>Intel Virtualization Technology</td><td>[Enabled]</td></tr><tr><td>CPU AES</td><td>[Enabled]</td></tr><tr><td>Intel(R) Speed Shift Technology</td><td>[Enabled]</td></tr><tr><td>Intel(R) SpeedStep(tm)</td><td>[Enabled]</td></tr><tr><td>Turbo Mode</td><td>[Enabled]</td></tr><tr><td>CPU C states</td><td>[Enabled]</td></tr><tr><td>CState Pre-Wake</td><td>[Enabled]</td></tr><tr><td>Package C State limit</td><td>[AUTO]</td></tr><tr><td>CPU DTS</td><td>[Disabled]</td></tr><tr><td>TCC Activation Offset</td><td>0</td></tr><tr><td>ACPI 3.0 T-States</td><td>[Disabled]</td></tr><tr><td>Intel TXT(LT) Support</td><td>[Disabled]</td></tr></table>

Enables or Disables Intel(R) TXT(LT) support.

++: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.

# Hyper-threading

Enabled for Windows XP and Linux optimized for HT-technology and Disabled for other OS not optimized for HT Technology. When Disabled only one thread per enabled core is enabled.

# Active Processor Cores

Number of cores to enable in each processor package.

# Intel Virtualization Technology

When enabled, utilizes the additional hardware capabilities provided by Vanderpool Technology

# CPU AES

Enables/disables CPU Advanced Encryption Standard instructions

# Intel Speed Shift Technology

Enables/disables Intel® Speed Shift Technology support. Enabling will expose the CPPC v2 interface to allow for hardware controlled P-states.

# Intel® SpeedStep $^{(tm)}$

Allows more than two frequency ranges to be supported.

# Turbo Mode

Turbo Mode.

# CPU C states

Enables/disables CPU C states

# CState Pre-Wake

Disable - Sets bit 30 of POWER\_CTL MSR (0x1FC) to 1 to disable the Cstate Pre-Wake

# Package C State limit

Options: C0/C1, C2, C3, C6, C7, C7s, C8, AUTO

# CPU DTS

Disabled: ACPI thermal management uses EC reported temperature values.

Enabled: ACPI thermal management uses DTS SMM mechanism to obtain CPU temperature values.

Out of Spec: ACPI Thermal Management uses EC reported temperature values and DTS SMM is used to handle Out of Spec condition.

# TCC Activation Offset

Offset from the factory TCC activation temperature

# ACPI 3.0 T-States

Enables/disables ACPI 3.0 T-States.

# Intel TXT(LT) Support

Disables Intel® TXT(LT) support.

# A.5.3 Chipset Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.</td></tr><tr><td>Advanced</td><td></td></tr><tr><td>Memory Configuration</td><td rowspan="2">Enable/Disable Memory Remap above 4GB</td></tr><tr><td rowspan="2">Memory Frequency 2133 MHzTotal Memory 8192 MBVDD 1200 mVoltsDIMM A1 Not PresentDIMM A2 Not PresentDIMM B1 8192 MBDIMM B2 Not PresentMemory Timings (tCL-tRCD-tRP-tRAS) 15-15-15-36Memory Remap [Enabled]</td></tr><tr><td>+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF2: Previous ValuesF3: Optimized DefaultsF4: Save &amp; ExitESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

# Memory Remap

Enables/disables Memory Remap above 4GB.

# A.5.4 System Agent (SA) Configuration

<table><tr><td>System Agent (SA) Configuration System Agent Bridge Name Skylake SA PCIe Code Version 1.7.0.0 VT-d Supported VT-d [Enabled] Above 4GB MMIO BIOS assignment [Disabled]</td><td>VT-d capability</td></tr><tr><td></td><td>++: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

# VT-d

VT-d capability

# Above 4GB MMIO BIOS assignment

Enables/disables above 4GB MemoryMapped IO BIOS assignment. This is disabled automatically when Aperture Size is set to 2048MB.

# A.5.5 Graphics Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc. Advanced</td></tr><tr><td>Graphics Configuration Primary Display [Auto] Internal Graphics [Auto] GTT Size [8MB] Aperture Size [256MB] DVMT Pre-Allocated [32M] DVMT Total Gfx Mem [256M]</td><td>Select which of IGFX/PEG/PCI Graphics device should be Primary Display Or select SG for Switchable GFX.</td></tr><tr><td></td><td>+: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

# Primary Display

Selects which IGFX/PEG/PCI Graphics device should be Primary Display Or selects SG for Switchable Gfx.

# Internal Graphics

Keep IGFX enabled based on the setup options.

# GTT Size

Selects the GTT Size

# Aperture Size

# Selects the Aperture Size

![The image displays a white document icon featuring horizontal lines representing text, overlaid with a large red checkmark on the right side.](.imb-m43-50-1x014-1000-200-en/8b17ced76bae78b88f88e52674256948e5cf2137473aa6be2a610bec881b9d22.jpg)
NOTE:

Above 4GB MMIO BIOS assignment is automatically enabled when selecting 2048MB aperture. To use this feature, please disable CSM Support.

# DVMT Pre-Allocated

Selects DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphics Device.

# DVMT Total Gfx Mem

Selects DVMT5.0 Total Graphic Memory size used by the Internal Graphics Device.

# A.5.6 PCI Express Configuration

<table><tr><td rowspan="2">PCI Express Configuration
► PEG Port Configuration
► PCIE1
► PCIE2</td><td>PEG Port Options</td></tr><tr><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

# PEG Port Configuration

# PEG Port Options

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc. Advanced</td></tr><tr><td rowspan="2">PEG Port ConfigurationPEG1 Max Link Speed Not Present [Auto]PEG2 Max Link Speed Not Present [Auto]PEG3 Max Link Speed Not Present [Auto]</td><td>Configure PEG1 Max Speed</td></tr><tr><td>+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF2: Previous ValuesF3: Optimized DefaultsF4: Save &amp; ExitESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

# Max Link Speed

Configure PEG1 Max Speed

Option: Auto, Gen1, Gen2, Gen3

# Max Link Speed

Configure PEG2 Max Speed

Option: Auto, Gen1, Gen2, Gen3

# Max Link Speed

Configure PEG3 Max Speed

Option: Auto, Gen1, Gen2, Gen3

![Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.\nAdvanced\nPCIE1\nPCIe Speed (Auto)\nDetect Non-Compliance Device (Disabled)\nSelect PCI Express port speed.\n++: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit\nVersion 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.](.imb-m43-50-1x014-1000-200-en/fadbe10a365457242e77b7b6eb56b33d582bd47eded0aa9441ed323edb5c8918.jpg)

# PCIE1

# PCIe Speed

Selects PCI Express port speed.

Options: Auto, Gen1, Gen2, Gen3

# Detect Non-Compliance Device

Options: Disabled/Enabled

Detects Non-Compliance PCI Express Device. If enabled, increases POST time.

Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.

Advanced

PCIE2

PCIe Speed

Detect Non-Compliance Device

[Auto]

[Disabled]

Select PCI Express port speed.

++: Select Screen

↑↓: Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC: Exit

Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.

# PCIE2

# PCIe Speed

Selects PCI Express port speed.

Options: Auto, Gen1, Gen2, Gen3

# Detect Non-Compliance Device

Options: Disabled/Enabled

Detects Non-Compliance PCI Express Device. If enabled, increases POST time.

# A.5.7 USB Configuration

![Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.\nAdvanced\nUSB Configuration\nUSB Precondition (Disabled)\nUSB3 Port 1 (Enabled)\nUSB3 Port 2 (Enabled)\nUSB3 Port 3 (Enabled)\nUSB3 Port 4 (Enabled)\nUSB3 Port 5 (Enabled)\nUSB3 Port 6 (Enabled)\nUSB3 Port 7 (Enabled)\nUSB3 Port 8 (Enabled)\nUSB2 Port 1 (Enabled)\nUSB2 Port 2 (Enabled)\nUSB2 Port 3 (Enabled)\nUSB2 Port 4 (Enabled)\nUSB2 Port 5 (Enabled)\nUSB2 Port 6 (Enabled)\nUSB2 Port 7 (Enabled)\nUSB2 Port 8 (Enabled)\nUSB2 Port 9 (Enabled)\nUSB2 Port 10 (Enabled)\nUSB2 Port 11 (Enabled)\nUSB2 Port 12 (Enabled)\nPrecondition work on USB host\ncontroller and root ports for\nfaster enumeration.\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit\nVersion 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.](.imb-m43-50-1x014-1000-200-en/c76455f61b53b330815e8847ea16ae66af2d500e793de6dfb41ac374a028cb7d.jpg)

Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Advanced

<table><tr><td>USB2 Port 4</td><td>[Enabled]</td><td rowspan="11">Mass storage device emulation type. &#x27;AUTO&#x27; enumerates devices according to their media format. Optical drives are emulated as &#x27;CDROM&#x27;, drives with no media will be emulated according to a drive type.</td></tr><tr><td>USB2 Port 5</td><td>[Enabled]</td></tr><tr><td>USB2 Port 6</td><td>[Enabled]</td></tr><tr><td>USB2 Port 7</td><td>[Enabled]</td></tr><tr><td>USB2 Port 8</td><td>[Enabled]</td></tr><tr><td>USB2 Port 9</td><td>[Enabled]</td></tr><tr><td>USB2 Port 10</td><td>[Enabled]</td></tr><tr><td>USB2 Port 11</td><td>[Enabled]</td></tr><tr><td>USB2 Port 12</td><td>[Enabled]</td></tr><tr><td>USB2 Port 13</td><td>[Enabled]</td></tr><tr><td>USB2 Port 14</td><td>[Enabled]</td></tr><tr><td>Legacy USB Support</td><td>[Enabled]</td><td rowspan="10">+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF2: Previous ValuesF3: Optimized DefaultsF4: Save &amp; ExitESC: Exit</td></tr><tr><td>XHCI Hand-off</td><td>[Disabled]</td></tr><tr><td>USB Mass Storage Driver Support</td><td>[Enabled]</td></tr><tr><td>Port 60/64 Emulation</td><td>[Disabled]</td></tr><tr><td colspan="2">USB hardware delays and time-outs:</td></tr><tr><td>USB transfer time-out</td><td>[20 sec]</td></tr><tr><td>Device reset time-out</td><td>[20 sec]</td></tr><tr><td>Device power-up delay</td><td>[Auto]</td></tr><tr><td colspan="2">Mass Storage Devices:</td></tr><tr><td>MXT-USB</td><td>[Auto]</td></tr></table>

Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.

# USB Precondition

Precondition work on USB host controller and root ports for faster enumeration.

# USB3 Port 1 – USB3 Port 8

Enables/disables USB port.

# USB2 Port 1 – USB2 Port 14

Enables/disables USB port.

# Legacy USB Support

Enables Legacy USB support.

AUTO option disables legacy support if no USB devices are connected.

DISABLE option will keep USB devices available only for EFI applications.

# XHCI Hand-off

This is a workaround for OSes without XHCI hand-off support. The XHCI ownership change should be claimed by the XHCI driver.

# USB Mass Storage Driver Support

Enables/disables USB Mass Storage Driver Support.

# Port 60/64 Emulation

Enables I/O port 60h/64h emulation support. This should be enabled for complete USB keyboard legacy support for non-USB aware OSes.

# USB transfer time-out

The time-out value for Control, Bulk, and Interrupt transfers.

Options: 1 sec, 5 sec, 10 sec, 20 sec

# Device reset time-out

USB mass storage device Start Unit command time-out.

Options: 10 sec, 20 sec, 30 sec, 40 sec

# Device power-up delay

Maximum time the device will take before it properly reports itself to the Host Controller.

'Auto' uses default value: for a Root port it is 100 ms, for a Hub port the delay is taken from Hub descriptor.

'Manual' for delay range by 1 – 40 seconds in one second increments.

# A.5.8 USB Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc. Advanced</td></tr><tr><td>USB Controller [Enabled]
Intel USB3.0 Mode [Smart Auto]
Legacy USB Support [Enabled]
Legacy USB 3.0 Support [Enabled]</td><td>Enable or disable all the USB ports.</td></tr><tr><td></td><td>←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.</td></tr></table>

# USB Controller

Enables/disables the USB controller.

# Intel USB 3.0 Mode

Enables/disables Intel USB 3.0 mode.

# Legacy USB Support

Selects legacy support for USB devices, from default Enabled, supporting legacy USB, Auto, supporting legacy USB when devices are connected, and Disabled (if USB compatibility issues occur, it is recommended to select Disabled to enter OS), and UEFI Setup Only, in which USB devices are allowed only under UEFI setup and Windows/Linux OS.

# Legacy USB 3.0 Support

Enables/disables legacy support for USB 3.0 devices, with default Enabled.

# A.5.9 HD Audio Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc. Advanced</td></tr><tr><td rowspan="2">HD Audio Configuration HD Audio [Auto]</td><td>Control Detection of the HD-Audio device. Disabled = HDA will be unconditionally disabled Enabled = HDA will be unconditionally enabled Auto = HDA will be enabled if present, disabled otherwise.</td></tr><tr><td>+: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

# HD Audio

Control Detection of the HD-Audio device.

Disabled = HDA will be unconditionally disabled

Enabled = HDA will be unconditionally enabled

Auto = HDA will be enabled if present, disabled otherwise.

# A.5.10 SATA Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced H/W Monitor Boot Security Exit</td></tr><tr><td>Hardware Health Event Monitoring
CPU Temperature : 66 °C
M/B Temperature : 34 °C
CPU_FAN1 Speed : 2163 RPM
CPU_FAN2 Speed : N/A
CHA_FAN1 Speed : N/A
CHA_FAN2 Speed : N/A
Vcore : +1.776 V
+ 3.30V : +3.392 V
+ 5.00V : +5.088 V
+ 12.00V : +11.932 V
CPU_FAN1 &amp; 2 Setting [Full On]
CHA_FAN1 &amp; 2 Setting [Full On]
Over Temperature Protection [Disabled]
Case Open Feature [Disabled]</td><td>Quiet Fan Function Control
↔: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.</td></tr></table>

# SATA Configuration

SATA Controller(s)

Enables/disables SATA Device.

# SATA Mode Selection

Determines how SATA controller(s) operate.

Options: AHCI, RAID

Aggressive LPM Support

Enable PCH to aggressively enter link power state.

# SATA Controller Speed

Indicates the maximum speed the SATA controller can support.

Options: Default, Gen1, Gen2, Gen3

# Port 1 – Port 6

# Enables or Disables SATA Port

# A.5.11 Onboard Device Configuration

![Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.\nAdvanced\nOnboard devices configuration\nSerial Port 1 Configuration\nSerial Port (Enabled)\nCOM1 Control (RS232)\nDevice Settings IO=3F8h; IRQ=4;\nSerial Port 2 Configuration\nSerial Port (Enabled)\nCOM2 Control (RS232)\nDevice Settings IO=2F8h; IRQ=3;\nSerial Port 3 Configuration\nSerial Port (Enabled)\nDevice Settings IO=3E8h; IRQ=5;\nSerial Port 4 Configuration\nSerial Port (Enabled)\nDevice Settings IO=2E8h; IRQ=7;\nSerial Port 5 Configuration\nSerial Port (Enabled)\nDevice Settings IO=2F0h; IRQ=6;\nSerial Port 6 Configuration\nEnable or Disable Serial Port\n(COM)\n++: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit\nVersion 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.](.imb-m43-50-1x014-1000-200-en/96644d989415ff1bf735b73ca85d8be263a5ddfe4d3a24e3fb58bd610d9314ac.jpg)

Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.

Advanced

<table><tr><td>Serial Port 4 Configuration Serial Port Device Settings</td><td>[Enabled] IO=2E8h; IRQ=7;</td></tr><tr><td>Serial Port 5 Configuration Serial Port Device Settings</td><td>[Enabled] IO=2F0h; IRQ=6;</td></tr><tr><td>Serial Port 6 Configuration Serial Port Device Settings</td><td>[Enabled] IO=2E0h; IRQ=6;</td></tr><tr><td>Serial Port Console Redirection Parallel Port Configuration Parallel Port Device Settings Device Mode</td><td>[Enabled] IO=378h; IRQ=14; [STD Printer Mode]</td></tr><tr><td>Lan Port Configuration LAN #1 (Intel I219) LAN #1(I219) Launch PXE OpROM LAN #2 (Intel I211) LAN #2(I211) Launch PXE OpROM</td><td>[Enabled] [Disabled] [Disabled] [Disabled]</td></tr></table>

This page intentionally left blank

Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.

# Serial Port 1

Enables or Disables Serial Port (COM)

# COM1 Control

Selects COM1 mode. RS232, RS422 or RS485

# Serial Port 2

Enables or Disables Serial Port (COM)

# COM2 Control

Selects COM2 mode. RS232, RS422 or RS485

# Serial Port 3 - 6

Enables or Disables Serial Port (COM)

# Serial Port Console Redirection

COM1 – COM6 and COM (PCI Bus0, Dev22, Func3) Console Redirection Enables or Disables

# Legacy Console Redirection

Selects a COM Port to display redirection of Legacy OS and Legacy OPROM messages

Options: COM1 – COM6 and COM (PCI Bus0, Dev22, Func3)

# Parallel Port

Enables or Disables Parallel Port (LPT/LPTE)

# Device Mode

Change the Printer Port mode.

Option: STD Printer Mode, SPP Mode, EPP-1.9 and SPP Mode, EPP-1.7 and SPP Mode, ECP Mode, ECP and EPP 1.9 Mode, ECP and EPP 1.7 Mode

# LAN #1 (Intel I219)

Enables/disables

# LAN #1 (I219) Launch PXE OpROM

Enables/disables Boot Option for Legacy Network Devices.

# LAN #2 (Intel I211)

Enables/disables

# LAN #1 (I211) Launch PXE OpROM

Enables/disables Boot Option for Legacy Network Devices.

# A.5.12 Advance Power Management

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc. Advanced</td></tr><tr><td rowspan="2">Advanced Power ManagementPower Supply Unit [ATX Mode]State After G3 [Last State]RTC Wake system from S5 [Disabled]PCIe Slot Wake [Enabled]Onboard LAN i219 Wake [Enabled]PCI/SIO Wake [Enabled]PS/2 Device Wake [Disabled]BIOS POST Watchdog [Disabled]</td><td>ATX: OS will turn off system power when shutdown. NOTE: AT mode will not support S3 &amp; S4.</td></tr><tr><td>++: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF2: Previous ValuesF3: Optimized DefaultsF4: Save &amp; ExitESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

# Power Supply Unit

ATX: OS turns off system power when shut down. NOTE: AT mode will not support S3 & S4.

# State After G3

Specify what state to go to when power is re-applied after a power failure (G3 state).

Options: Power On, Power Off, Last State

# RTC Wake system from S5

Enables/disables System wake on alarm event.

Selects FixedTime, system will wake on the hr::min::sec specified.

Selects DynamicTime, System will wake on the current time + Increase minute(s)

# PCIe Slot Wake

Enables/disables PCI Express Slot wake capability

Onboard LAN i219 Wake

Enables/disables onboard LAN wake capability

# PCI/SIO Wake

Enables/disables PCI/SIO wake capability

# PS/2 Device Wake

Enables/disables PS/2 device wake from S5

# BIOS POST Watchdog

Set watchdog timer for BIOS POST process.

Options: Disabled, Second Mode, Minute Mode

# A.5.13 AMT Configuration

<table><tr><td colspan="3">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc. Advanced</td></tr><tr><td rowspan="2">Intel AMT BIOS Hotkey Pressed</td><td rowspan="2">[Enabled] [Disabled]</td><td>Enable/Disable Intel (R) Active Management Technology BIOS Extension. Note : iAMT H/W is always enabled. This option just controls the BIOS extension execution. If enabled, this requires additional firmware in the SPI device</td></tr><tr><td>++: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="3">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

# Intel AMT

Enables/disables Intel® Active Management Technology BIOS Extension.

Note: iAMT H/W is always enabled. This option just controls the BIOS extension execution. If enabled, this requires additional firmware in the SPI device

# BIOS Hotkey Pressed

OEMFLag Bit 1: Enables/disables BIOS hotkey press.

# A.5.14 Intel® BIOS Guard Technology

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.</td></tr><tr><td>Advanced</td><td></td></tr><tr><td rowspan="2">Intel Bios Guard Support [Disabled]</td><td>Enable/Disable Intel Bios
Guard Support</td></tr><tr><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

# Intel Bios Guard Support

Enables/disables Intel BIOS Guard Support. Disable before flashing BIOS.

# A.5.15 Network Stack Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc. Advanced</td></tr><tr><td rowspan="2">Network Stack [Disabled]</td><td>Enable/Disable UEFI Network Stack</td></tr><tr><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

# Network Stack

Enables/disables UEFI Network Stack

# A.5.16 CSM Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc. Advanced</td></tr><tr><td>Compatibility Support Module Configuration</td><td>Enable/Disable CSM Support.</td></tr><tr><td>CSM Support [Enabled]</td><td></td></tr><tr><td>CSM16 Module Version 07.79</td><td></td></tr><tr><td>GateA20 Active [Upon Request]</td><td></td></tr><tr><td>Option ROM Messages [Force BIOS]</td><td></td></tr><tr><td>INT19 Trap Response [Immediate]</td><td></td></tr><tr><td>Boot option filter [UEFI and Legacy]</td><td></td></tr><tr><td>Option ROM execution</td><td></td></tr><tr><td>Network [Do not launch]</td><td rowspan="4">++: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF2: Previous ValuesF3: Optimized DefaultsF4: Save &amp; ExitESC: Exit</td></tr><tr><td>Storage [Do not launch]</td></tr><tr><td>Video [Legacy]</td></tr><tr><td>Other PCI devices [Do not launch]</td></tr></table>

# CSM Support

Enables/disables CSM Support.

# GateA20 Active

UPON REQUEST - GA20 can be disabled using BIOS services.

ALWAYS - do not allow disabling GA20; this option is useful when any RT code is executed above 1MB.

# Option ROM Messages

Set display mode for Option ROM

Options: Force BIOS, Keep Current

# INT19 Trap Response

BIOS reaction on INT19 trapping by Option ROM:

IMMEDIATE - execute the trap right away;

POSTPONED - execute the trap during legacy boot.

# Boot option filter

This option controls Legacy/UEFI ROMs priority

# Network

Controls the execution of UEFI and Legacy PXE OpROM

# Storage

Controls the execution of UEFI and Legacy Storage OpROM

# Video

Controls the execution of UEFI and Legacy Video OpROM

# Other PCI devices

Determines OpROM execution policy for devices other than Network, Storage, or Video

# A.5.17 NCT6106D HW Monitor

Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.

Advanced

Pc Health Status

```txt
CPU Temperature : +34 ℃
System Temperature1 : +27 ℃
System Temperature2 : +28 ℃
CPU Fan Speed : 1032 RPM
System Fan1 Speed : N/A
System Fan2 Speed : N/A
VCORE : +0.960 V
+12V voltage : +11.904 V
+5V voltage : +4.979 V
+3.3V voltage : +3.296 V
```

```txt
CPU Fan Control Mode [SMART FAN IV]
T1 10
T1 Duty 16
T2 50
T2 Duty 80
T3 60
T3 Duty 90
T4 70
T4 Duty 240
Critical 80
System Fan1 Control Mode [SMART FAN IV]
T1 10
```

CPU Fan Control Mode Select

++: Select Screen

↑↓: Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC: Exit

Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.

Advanced

<table><tr><td>T3</td><td>60</td><td>Critical Temperature</td></tr><tr><td>T3 Duty</td><td>90</td><td></td></tr><tr><td>T4</td><td>70</td><td></td></tr><tr><td>T4 Duty</td><td>240</td><td></td></tr><tr><td>Critical</td><td>80</td><td></td></tr><tr><td>System Fan1 Control Mode</td><td>[SMART FAN IV]</td><td></td></tr><tr><td>T1</td><td>10</td><td></td></tr><tr><td>T1 Duty</td><td>16</td><td></td></tr><tr><td>T2</td><td>50</td><td></td></tr><tr><td>T2 Duty</td><td>80</td><td></td></tr><tr><td>T3</td><td>60</td><td></td></tr><tr><td>T3 Duty</td><td>90</td><td></td></tr><tr><td>T4</td><td>70</td><td></td></tr><tr><td>T4 Duty</td><td>240</td><td>+: Select Screen</td></tr><tr><td>Critical</td><td>80</td><td>↑↓: Select Item</td></tr><tr><td>System Fan2 Control Mode</td><td>[SMART FAN IV]</td><td>Enter: Select</td></tr><tr><td>T1</td><td>10</td><td>+/-: Change Opt.</td></tr><tr><td>T1 Duty</td><td>16</td><td>F1: General Help</td></tr><tr><td>T2</td><td>50</td><td>F2: Previous Values</td></tr><tr><td>T2 Duty</td><td>80</td><td>F3: Optimized Defaults</td></tr><tr><td>T3</td><td>60</td><td>F4: Save &amp; Exit</td></tr><tr><td>T3 Duty</td><td>90</td><td>ESC: Exit</td></tr><tr><td>T4</td><td>70</td><td></td></tr><tr><td>T4 Duty</td><td>240</td><td></td></tr><tr><td>Critical</td><td>80</td><td></td></tr></table>

Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.

# CPU Fan Control Mode

CPU Fan Control Mode Select

Options: Manual Mode, SMART FAN IV

T1

T1 (Temperature 1), Range: 1-100

T1 Duty

Set T1 related DC/PWM value, Range: 0-255

T2

T2 (Temperature 2), Range: 1-100

T2 Duty

Set T2 related DC/PWM value, Range: 0-255

T3

T3 (Temperature 3), Range: 1-100

# T3 Duty

Set T3 related DC/PWM value, Range: 0-255

# T4

T4 (Temperature 4), Range: 1-100

# T4 Duty

Set T4 related DC/PWM value, Range: 0-255

# Critical

Critical Temperature

# System Fan1 Control Mode

System Fan1 Control Mode Select

Options: Manual Mode, SMART FAN IV

# T1

T1 (Temperature 1), Range: 1-100

# T1 Duty

Set T1 related DC/PWM value, Range: 0-255

# T2

T2 (Temperature 2), Range: 1-100

# T2 Duty

Set T2 related DC/PWM value, Range: 0-255

# T3

T3 (Temperature 3), Range: 1-100

# T3 Duty

Set T3 related DC/PWM value, Range: 0-255

# T4

T4 (Temperature 4), Range: 1-100

# T4 Duty

Set T4 related DC/PWM value, Range: 0-255

# Critical

Critical Temperature

# System Fan2 Control Mode

System Fan2 Control Mode Select

Options: Manual Mode, SMART FAN IV

T1

T1 (Temperature 1), Range: 1-100

# T1 Duty

Set T1 related DC/PWM value, Range: 0-255

T2

T2 (Temperature 2), Range: 1-100

# T2 Duty

Set T2 related DC/PWM value, Range: 0-255

T3

T3 (Temperature 3), Range: 1-100

# T3 Duty

Set T3 related DC/PWM value, Range: 0-255

T4

T4 (Temperature 4), Range: 1-100

# T4 Duty

Set T4 related DC/PWM value, Range: 0-255

# Critical

Critical Temperature

# A.5.18 Miscellaneous Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc. Advanced</td></tr><tr><td>Miscellaneous Configuration
High Precision Timer [Enabled]
Port 80h Redirection [LPC Bus]
SMART Self Test [Disabled]
Pcie P11 SSC [Auto]</td><td>Enable or Disable the High Precision Event Timer.</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

# High Precision Timer

Enables/disables the High Precision Event Timer.

# Port 80h Redirection

Control where the Port 80h cycles are sent.

Options: LPC Bus, PCIE Bus

# SMART Self Test

Run SMART Self Test on all HDDs during POST.

# Pcie PII SSC

Pcie PII SSC percentage.

AUTO - Keep hw default, no BIOS override.

Range is 0.0% - 2.0%.

# A.6 Security

# A.6.1 Administrator Password

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.Main Advanced Security Boot Save &amp; Exit</td></tr><tr><td>Password DescriptionIf ONLY the Administrator&#x27;s password is set,then this only limits access to Setup and isonly asked for when entering Setup.If ONLY the User&#x27;s password is set, then thisis a power on password and must be entered toboot or enter Setup. In Setup the User willhave Administrator rights.The password length must bein the following range:Minimum length 3Maximum length 20Administrator PasswordUser PasswordRTC Lock [Enabled]BIOS Lock [Enabled]Secure Boot menu</td><td>Set Administrator Password+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF2: Previous ValuesF3: Optimized DefaultsF4: Save &amp; ExitESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

# Administrator Password

Set Administrator Password

# User Password

Set User Password

# RTC Lock

Enable will lock bytes 38h-3Fh in the lower/upper 128-byte bank of RTC RAM.

# BIOS Lock

Enables/disables the PCH BIOS Lock Enable (BLE bit) feature.

# A.6.2 Secure Boot menu

<table><tr><td>System Mode</td><td>Setup</td><td rowspan="6">Secure Boot can be enabled if 1. System running in User mode with enrolled Platform Key(PK 2.CSM function is disabled</td></tr><tr><td>Secure Boot</td><td>Not Active</td></tr><tr><td>Vendor Keys</td><td>Not Active</td></tr><tr><td>Secure Boot</td><td>[Disabled]</td></tr><tr><td>Secure Boot Mode</td><td>[Custom]</td></tr><tr><td>Key Management</td><td></td></tr><tr><td></td><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="3">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

# Secure Boot

Secure Boot can be enabled if:

1. System running in User mode with enrolled Platform Key(PK)
2. CSM function is disabled

# Secure Boot Mode

Secure Boot mode selector.

Options: Standard, Custom

'Custom' Mode enables users to change Image Execution policy and manage Secure Boot Keys

# Key Management

Enables experienced users to modify Secure Boot variables

# A.7 Boot

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.Main Advanced Security Boot Save &amp; Exit</td></tr><tr><td>Boot ConfigurationSetup Prompt Timeout [On]Bootup NumLock State [Enabled]Quiet BootFast Boot [Disabled]New Boot Option Policy [Default]Boot mode select [UEFI]FIXED BOOT ORDER PrioritiesBoot Option #1 [Hard Disk]Boot Option #2 [CD/DVD]Boot Option #3 [USB Hard Disk]Boot Option #4 [USB CD/DVD]Boot Option #5 [USB Key:UEFI:JetFlashTranscend 16GB1.00, Partition 1]Boot Option #6 [USB Floppy]Boot Option #7 [USB Lan]Boot Option #8 [Network]UEFI USB Key Drive BBS Priorities</td><td>Number of seconds to wait for setup activation key.65535(0xFFFF) means indefinite waiting.++: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF2: Previous ValuesF3: Optimized DefaultsF4: Save &amp; ExitESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

# Setup Prompt Timeout

Number of seconds to wait for setup activation key.

65535(0xFFFF) means indefinite waiting.

# Bootup NumLock State

Selects the keyboard NumLock state

# Quiet Boot

Enables/disables Quiet Boot option

# Fast Boot

Enables/disables boot with initialization of a minimal set of devices required to launch active boot option. Has no effect for BBS boot options.

# New Boot Option Policy

Controls the placement of newly detected UEFI boot options

Options: Default, Place First, Place Last

# Boot mode select

Selects boot mode LEGACY/UEFI

# Boot Option #1

Sets the system boot order

# Boot Option #2

Sets the system boot order

# Boot Option #3

Sets the system boot order

# Boot Option #4

Sets the system boot order

# Boot Option #5

Sets the system boot order

# Boot Option #6

Sets the system boot order

# Boot Option #7

Sets the system boot order

# Boot Option #8

Sets the system boot order

# A.8 Save & Exit

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Main Advanced Security Boot Save &amp; Exit</td></tr><tr><td>Boot Configuration
Setup Prompt Timeout
Bootup NumLock State
Quiet Boot</td><td>Number of seconds to wait for setup activation key.
65535(0xFFFF) means indefinite waiting.</td></tr><tr><td>Fast Boot</td><td>[Disabled]</td></tr><tr><td>New Boot Option Policy
Boot mode select</td><td>[Default]
[UEFI]</td></tr><tr><td>FIXED BOOT ORDER Priorities
Boot Option #1
Boot Option #2
Boot Option #3
Boot Option #4
Boot Option #5
Boot Option #6
Boot Option #7
Boot Option #8</td><td>++: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td>▶ UEFI USB Key Drive BBS Priorities</td><td></td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

# Save Changes and Exit

Exit system setup after saving the changes.

# Discard Changes and Exit

Exit system setup without saving any changes.

# Save Changes and Reset

Reset the system after saving the changes.

# Discard Changes and Reset

Reset system setup without saving any changes.

# Save Changes

Save Changes done so far to any of the setup options.

# Discard Changes

Discard Changes done so far to any of the setup options.

# Restore Defaults

Restore/Load Default values for all the setup options.

# Save as User Defaults

Save the changes done so far as User Defaults.

# Restore User Defaults

Restore the User Defaults to all the setup options.

# Launch EFI Shell from filesystem device

Attempts to Launch EFI Shell application (Shell.efi) from one of the available filesystem devices

This page intentionally left blank.

# Important Safety Instructions

For user safety, please read and follow all instructions, Warnings, Cautions, and Notes marked in this manual and on the associated device before handling/operating the device, to avoid injury or damage.

S'il vous plaît prêter attention stricte à tous les avertissements et mises en garde figurant sur l'appareil, pour éviter des blessures ou des dommages.

▶ Read these safety instructions carefully
- Keep the User’s Manual for future reference
▶ Read the Specifications section of this manual for detailed information on the recommended operating environment
▶ The device can be operated at an ambient temperature of $50^{\circ}$ C
- When installing/mounting or uninstalling/removing device; or when removal of a chassis cover is required for user servicing (See “Getting Started” on page 23.):

▷ Turn off power and unplug any power cords/cables
▶ Reinstall all chassis covers before restoring power

▶ To avoid electrical shock and/or damage to device:

▷ Keep device away from water or liquid sources
▷ Keep device away from high heat or humidity
▷ Keep device properly ventilated (do not block or cover ventilation openings)
▶ Always use recommended voltage and power source settings
▶ Always install and operate device near an easily accessible electrical outlet
▷ Secure the power cord (do not place any object on/over the power cord)
▶ Only install/attach and operate device on stable surfaces and/or recommended mountings

▶ If the device will not be used for long periods of time, turn off and unplug from its power source

▶ Never attempt to repair the device, which should only be serviced by qualified technical personnel using suitable tools
▶ A Lithium-type battery may be provided for uninterrupted backup or emergency power.

![The image displays a partial view of a yellow triangular warning sign. Centered inside the yellow triangle is a large black exclamation mark. Above the triangle is a white horizontal section.](.imb-m43-50-1x014-1000-200-en/8b1294d98398f9b2daeac4266c107fc88c8b53d8ae72c4a2ff113c9acf1b8741.jpg)
CAUTION:

Risk of explosion if battery is replaced with one of an incorrect type; please dispose of used batteries appropriately.

Risque d'explosion si la pile est remplacée par une autre de type incorrect. Veuillez jeter les piles usagées de façon appropriée.

▶ The device must be serviced by authorized technicians when:

The power cord or plug is damaged
▷ Liquid has entered the device interior
The device has been exposed to high humidity and/or moisture
The device is not functioning or does not function according to the User's Manual
The device has been dropped and/or damaged and/or shows obvious signs of breakage

▶ Disconnect the power supply cord before loosening the thumbscrews and always fasten the thumbscrews with a screwdriver before starting the system up

It is recommended that the device be installed only in a server room or computer room where access is:

▶ Restricted to qualified service personnel or users familiar with restrictions applied to the location, reasons therefor, and any precautions required

▶ Only afforded by the use of a tool or lock and key, or other means of security, and controlled by the authority responsible for the location

![Yellow triangular warning sign with black smoke symbol indicating hot weather](.imb-m43-50-1x014-1000-200-en/5a15b398af2bdeff2cb712835a6221e25f340d6d493a2120650c49d92bc34597.jpg)

# BURN HAZARD

Touching this surface could result in bodily injury. To reduce risk, allow the surface to cool before touching.

# RISQUE DE BRÛLURES

Ne touchez pas cette surface, cela pourrait entraîner des blessures.

Pour éviter tout danger, laissez la surface refroidir avant de la toucher.

This page intentionally left blank.

# Getting Service

Ask an Expert: http://askanexpert.adlinktech.com

# ADLINK Technology, Inc.

Address: 9F, No.166 Jian Yi Road, Zhonghe District
New Taipei City 235, Taiwan
新北市中和區建一路 166 號 9 樓

Tel: +886-2-8226-5877

Fax: +886-2-8226-5717

Email: service@adlinktech.com

# Ampro ADLINK Technology, Inc.

Address: 5215 Hellyer Avenue, #110
San Jose, CA 95138, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

Fax: +1-408-360-0222

Email: info@adlinktech.com

# ADLINK Technology (China) Co., Ltd.

Address: 上海市浦东新区张江高科技园区芳春路300号(201203)300 Fang Chun Rd., Zhangjiang Hi-Tech Park Pudong New Area, Shanghai, 201203 China

Tel: +86-21-5132-8988

Fax: +86-21-5132-3588

Email: market@adlinktech.com

# ADLINK Technology Beijing

Address: 北京市海淀区上地东路 1 号盈创动力大厦 E 座 801 室(100085)
Rm. 801, Power Creative E, No. 1 Shang Di East Rd.
Beijing, 100085 China

Tel: +86-10-5885-8666

Fax: +86-10-5885-8626

Email: market@adlinktech.com

# ADLINK Technology Shenzhen

Address: 深圳市南山区科技园南区高新南七道 数字技术园
A1 栋 2 楼 C 区 (518057)
2F, C Block, Bldg. A1, Cyber-Tech Zone, Gao Xin Ave. Sec. 7
High-Tech Industrial Park S., Shenzhen, 518054 China

Tel: +86-755-2643-4858

Fax: +86-755-2664-6353

Email: market@adlinktech.com

# LiPPERT ADLINK Technology GmbH

Address: Hans-Thoma-Strasse 11
D-68163 Mannheim, Germany

Tel: +49-621-43214-0

Fax: +49-621 43214-30

Email: emea@adlinktech.com

# PENTA ADLINK Technology GmbH

Ulrichsbergerstrasse 17
94469 Deggendorf, Germany

Tel: +49 (0) 991 290 94 - 10

Fax: +49 (0) 991 290 94 - 29

Email: emea@adlinktech.com

# ADLINK Technology, Inc. (French Liaison Office)

Address: 6 allée de Londres, Immeuble Ceylan
91940 Les Ulis, France

Tel: +33 (0) 1 60 12 35 66

Fax: +33 (0) 1 60 12 35 66

Email: france@adlinktech.com

# ADLINK Technology Japan Corporation

Address: 〒101-0045 東京都千代田区神田鍛冶町3-7-4
神田374 ビル4F
KANDA374 Bldg. 4F, 3-7-4 Kanda Kajicho,
Chiyoda-ku, Tokyo 101-0045, Japan

Tel: +81-3-4455-3722

Fax: +81-3-5209-6013

Email: japan@adlinktech.com

# ADLINK Technology, Inc. (Korean Liaison Office)

Address: 경기도 성남시 분당구 수내로 46 번길 4 경동빌딩 2 층 (수내동 4-4 번지) (우) 463-825
2F, Kyungdong B/D, 4 Sunae-ro 46 beon-gil
Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-825

Toll Free +82-80-800-0585

Tel +82-31-786-0585

Fax +82-31-786-0583

Email: korea@adlinktech.com

# ADLINK Technology Singapore Pte. Ltd.

Address: 84 Genting Lane #07-02A, Cityneon Design Centre Singapore 349584

Tel: +65-6844-2261

Fax: +65-6844-2263

Email: singapore@adlinktech.com

# ADLINK Technology Singapore Pte. Ltd. (Indian Liaison Office)

Address: #50-56, First Floor, Spearhead Towers Margosa Main Road (between 16th/17th Cross) Malleswaram, Bangalore - 560 055, India

Tel: +91-80-65605817, +91-80-42246107

Fax: +91-80-23464606

Email: india@adlinktech.com

# ADLINK Technology, Inc. (Israeli Liaison Office)

Address: 27 Maskit St., Corex Building
PO Box 12777
Herzliya 4673300, Israel

Tel: +972-54-632-5251

Fax: +972-77-208-0230

Email: israel@adlinktech.com

# ADLINK Technology, Inc. (UK Liaison Office)

Tel: +44 774 010 59 65

Email: UK@adlinktech.com
[🔗 Link to the original document](.imb-m43-50-1x014-1000-200-en/imb-m43-50-1x014-1000-200-en.pdf)