# MVP-3100 Series

# MVP-3100/MVP-3120

# User’s Manual

Fanless Embedded System with

14th/13th/12th Generation Intel® Core™ Processor and H610E Chipset

![Two ADLINK network equipment units shown from different port configurations (no visible text or labels on the devices themselves)](.mvp-3100-50m-41059-1000-10/4c797092c1928d7757a5afb047b46e7f8a1f87e3597a8f9f39299e8ac1016b28.jpg)

Manual Rev.: Rev. 1.0

Revision Date: June 30 2025

Part Number: 50M-41059-1000

# Revision History

<table><tr><td>Revision</td><td>Release Date</td><td>Description of Change(s)</td></tr><tr><td>1.0</td><td>2025-06-30</td><td>Initial release</td></tr></table>

# Preface

# Copyright

Copyright 2025 ADLINK Technology, Inc. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

# Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

# Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.

![Symbol of a trash bin crossed with no text or labels, accompanied by a solid black rectangle below (no text or symbols present)](.mvp-3100-50m-41059-1000-10/26282f9701b4d1e2048299f9bd43f1deca232b7c47d02675e417419de10217d8.jpg)

Battery Labels (for products with battery)

![Simple line drawing of a trash bin with two crossed lines indicating no waste or prohibition (no text or symbols)](.mvp-3100-50m-41059-1000-10/ebc1bd07752420c0a4e5862202329ada55cc2b3d32fe79b8f89700b4e7871b07.jpg)

![Li-ion](.mvp-3100-50m-41059-1000-10/aeef21b3302278bb81307d2bbb65d5212b117cfe8b13f6489c4d8e3fa67e90b4.jpg)

![RECYCLE\nRBRC\nLi-ion\n7.800.822.8837](.mvp-3100-50m-41059-1000-10/53ddb09eb8305b33134205391067740228e90df04bfd525be0d4bdb7fe25f6b7.jpg)

![廢電池請回收](.mvp-3100-50m-41059-1000-10/5f025e1f525afb1ec81f9efa6981238e48e94e0abfe4dbba7f79e149871e75ae.jpg)

# California Proposition 65 Warning

![A yellow triangular warning sign featuring a thick black border and a central black exclamation point.](.mvp-3100-50m-41059-1000-10/57d79ddec4c04654056e7ab6827b33436ecffdc0957be6e7f18d8c6380181e54.jpg)

WARNING: This product can expose you to chemicals including acrylamide, arsenic, benzene, cadmium, Tris(1,3-dichloro-2-propyl)phosphate (TDCPP), 1,4-Dioxane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and vinyl materials, which are known to the State of California to cause cancer, and acrylamide, benzene, cadmium, lead, mercury, phthalates, toluene, DEHP, DIDP, DnHP,

DBP, BBP, PVC, and vinyl materials, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

# Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

# Conventions

Take note of the following conventions used throughout this manual to make sure that users perform certain tasks and instructions properly.

![The image shows an icon of a white document with a folded top-right corner and faint horizontal lines, overlaid with a large red checkmark.](.mvp-3100-50m-41059-1000-10/30feee546e41ce7e7b03fff6e8457581af101e2679236786b3ae65f85ee9df39.jpg)
NOTE:

Additional information, aids, and tips that help users perform tasks.

![The image shows a yellow triangular warning sign with a black border. In the center of the triangle is a large black exclamation point.](.mvp-3100-50m-41059-1000-10/04c48caa4f55074e8164ea63ae39a47da83f709f449380bfcdaf44b9f70a7aea.jpg)
CAUTION:

Information to prevent minor physical injury, component damage, data loss, and/or program corruption when trying to complete a task.

ATTENTION: Informations destinées à prévenir les blessures corporelles mineures, les dommages aux composants, la perte de données et/ou la corruption de programme lors de l'exécu- tion d'une tâche.

![The image displays a red triangular warning sign with a white exclamation mark centered inside it. There is no text present.](.mvp-3100-50m-41059-1000-10/7cf00285a5df665b8a5ebd89662218707e8a65c3c7daf3e6563b1b1a9c2c2859.jpg)
WARNING:

Information to prevent serious physical injury, component damage, data loss, and/or program corruption when trying to complete a specific task.

AVERTISSEMENT: Informations destinées à prévenir les bles- sures corporelles graves, les dommages aux composants, la perte de données et/ou la corruption de programme lors de l'exécution d'une tâche spécifique.

# Table of Contents

Preface...

List of Figures .... ..vi

List of Tables...... ..vi

1 Introduction....

1.1 Features.
1.2 Packing List.. 7
1.3 Optional Accessories .

2 Specifications ....

Product Specifications.. .9

3 Functional Block Diagram . .11

4 Mechanical Dimensions..... .13

MVP-3100 Mechanical Dimensions . ..13
4.2 MVP-3120 Mechanical Dimensions .. ..14

5 Getting Started... .15

Attach the DC Power Connector . ..15
5.2 Mounting . ..15
Dimension Limitations for the Expansion Card.. ..17

6 System Layout ......... ..19

External I/O Connector Locations . ..19
6.2 Mainboard Top/Bottom Connector Locations.. ..20

7 Connectors and Jumpers .. .23

7.1 External I/O Connectors.. .23
Internal I/O Connectors . .27

8 Driver Installation .. .29

Safety Instructions.... .30

Getting Services.......... .34

# List of Figures

Figure 1: Block diagram.. .11

Figure 2: MVP-3100 mechanical dimensions ..13

Figure 3: MVP-3120 mechanical dimensions . .14

Figure 4: External I/O connector locations. ..19

Figure 5: Mainboard connector locations (Top) . ..20

Figure 6: Mainboard connector locations (Bottom)... .21

Figure 7: 2-Solt backplane card locations.. .22

# List of Tables

Table 1: External I/O connector descriptions. ..19

Table 2: Mainboard connector descriptions (Top) . ..20

Table 3: Mainboard connector descriptions (Bottom) . .21

Table 4: 2-Solt backplane card descriptions. ..22

# 1 Introduction

ADLINK’s MVP-3100 series is a value-line, fanless embedded computing platform that supports Intel® Core™ processors. It offers two form factor options: a non-slot version and a 2-slot version, both designed for easy maintenance in industrial automation environments.

This series retains the robust design of ADLINK’s Matrix product line while introducing a cost-effective price point. The MVP-3100 series supports DDR5 memory for enhanced computing performance, and Intel® UHD Graphics 770 boosts graphics capabilities. With a versatile I/O array and flexible expansion options, the MVP-3100 series meets the rigorous demands of industrial automation (IA), including vision inspection, motion control, and surveillance applications.

Its fanless construction not only addresses noise and contamination challenges in harsh IA environments but also eliminates structural elements that reduce MTBF, significantly extending the platform’s lifecycle.

# Features

• 14th/13th/12th Generation Intel® Core™ processor and H610E chipset
• 2x DDR5 SODIMM socket, supporting up to 64GB DDR5 4800 SODIMM module
• 4x Ethernet ports (1x 2.5GbE and 3x 1.0GbE)
• 8x USB ports (4x USB 3.1 and 4x USB 2.0)
Supporting a PCIex16 slot and a PCI slot for the MVP-3120

# Packing List

Before unpacking, check the shipping carton for any damage. If the shipping carton and/or contents are damaged, inform your dealer immediately. Retain the shipping carton and packing materials for inspection. Obtain authorization from your dealer before returning any product to ADLINK. Ensure that the following items are included in the package.

MVP-3100 Series Embedded Computer

• Accessory Box

o DC power jack
o Wall-mount brackets
o Screw pack

# Optional Accessories

• 230W AC/DC adapter (P/N: 31-621A0-0010-A0)
Optional fan kit (P/N: TBD)
• Remote power switch cable (P/N: TBD)

This page intentionally left blank.

# 2 Specifications

Product Specifications

<table><tr><td>System</td><td>MVP-3100</td><td>MVP-3120</td></tr><tr><td>Processor</td><td colspan="2">12th-14th Gen. Intel® CoreTM i3/ i5/ i7/ i9, up to 65W</td></tr><tr><td>PCH</td><td colspan="2">H610E</td></tr><tr><td>Memory</td><td colspan="2">DDR5 4800MHz up to 64GB, 2x SO-DIMM</td></tr><tr><td>Storage</td><td>2x SATA</td><td>4x SATA</td></tr><tr><td>OS</td><td colspan="2">Windows 10 IoT, Windows 11 IoT, Ubuntu 22.04</td></tr><tr><td>TPM</td><td colspan="2">TPM 2.0</td></tr><tr><td>I/O Interface</td><td colspan="2"></td></tr><tr><td rowspan="2">Control button</td><td colspan="2">1x Power button</td></tr><tr><td colspan="2">1x Reset button</td></tr><tr><td rowspan="2">Video output</td><td colspan="2">1x HDMI 1.4b</td></tr><tr><td colspan="2">1x DisplayPort 1.4</td></tr><tr><td rowspan="2">USB</td><td colspan="2">4x USB 3.2 Gen1 Type A</td></tr><tr><td colspan="2">4x USB 2.0 Type A</td></tr><tr><td rowspan="3">Ethernet</td><td colspan="2">1x 2.5GbE (i226)</td></tr><tr><td colspan="2">2x 1.0GbE (i210)</td></tr><tr><td colspan="2">1x 1.0GbE (i219)</td></tr><tr><td rowspan="2">COM</td><td colspan="2">COM 1/2: RS-232/422/485</td></tr><tr><td colspan="2">COM 3: RS-232</td></tr><tr><td>Digital</td><td colspan="2">8DI + 8DO</td></tr><tr><td>Audio</td><td colspan="2">Line-out, Mic-in</td></tr><tr><td>SMA Antenna</td><td colspan="2">2 for Wi-Fi</td></tr><tr><td>Inner I/O Interface</td><td colspan="2"></td></tr><tr><td rowspan="2">M.2</td><td colspan="2">1x A+E Key 2230 (PCIe Gen3x1)</td></tr><tr><td colspan="2">1x M Key 2280 (PCIe Gen3x2)</td></tr><tr><td>USB</td><td colspan="2">1x USB 2.0 dongle</td></tr><tr><td>Other</td><td colspan="2"></td></tr><tr><td rowspan="4">LED Indicator</td><td colspan="2">1x Storage</td></tr><tr><td colspan="2">1x WDT</td></tr><tr><td colspan="2">1x Diagnostic</td></tr><tr><td colspan="2">3x User-defined</td></tr><tr><td>Backplane</td><td colspan="2"></td></tr><tr><td rowspan="2">2 Slot</td><td rowspan="2">None</td><td>1x PCIe Gen4x16</td></tr><tr><td>1x PCI</td></tr><tr><td>Power Supply</td><td colspan="2"></td></tr><tr><td rowspan="2">DC Input</td><td colspan="2">12-24Vdc, 19.2A-9.6A</td></tr><tr><td colspan="2">24Vdc, 9.6A (optional power adapter input)</td></tr><tr><td>Mechanical</td><td colspan="2"></td></tr><tr><td>Dimensions</td><td>192mm x 240mm x 77.2mm</td><td>192mm x 240mm x 156.2mm</td></tr><tr><td>Weight</td><td>3.68KG</td><td>4.52KG</td></tr><tr><td>Mounting</td><td>Wall mount</td><td>Wall mount</td></tr></table>

<table><tr><td>Environmental</td><td></td></tr><tr><td rowspan="2">Operating Temperature</td><td>-20°C to 60°C (35W CPU)</td></tr><tr><td>-20°C to 50°C (65W CPU)</td></tr><tr><td>Operating Humidity</td><td>~95% @ 40°C (non-condensing)</td></tr><tr><td>Storage Temperature</td><td>-40°C to 85°C</td></tr><tr><td>Operating Vibration</td><td>Operating: 3Grms, random, 5-500Hz, 3 axes (w/SSD)</td></tr><tr><td>Operating Shock</td><td>Operating: 50G, half sine 11ms duration (w/SSD)</td></tr><tr><td>ESD</td><td>Contact +/-4KV, Air +/-8KV</td></tr></table>

![This image shows a red triangle pointing upward with a white exclamation point centered inside it. Vertical black lines run along the far left and right edges of the frame.](.mvp-3100-50m-41059-1000-10/b38706005a5488e6c5d3a16f24dd9397824ca5df265e339899a0fd76328ac3b8.jpg)
WARNING:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

3 Functional Block Diagram
![**Labeled Blocks:**\n\n*   SODIMM 1~2 4800MHz\n*   DP1 CN\n*   Processor Alder Lake S 35W/65W\n*   HDMI LS PTN3360\n*   HDMI1 CN\n*   M.2 M-Key Conn. 2280 (NVMe)\n*   M.2 E-Key Conn. 2280 (WiFi/BT)\n*   SATA Conn. x2 (2.5' storage)\n*   USB DONGLE\n*   I2C Wafer x2\n*   Intel PCH H610E\n*   Intel I226 x1, Intel I210 x2, Intel I219 x1\n*   2.5G RJ45 x1, 1G RJ45 x3\n*   USB2.0 TYPE-A x4\n*   USB3.2 Gen1 TYPE-A x4\n*   8DI/8DO Wafer\n*   DI/DO DB26\n*   Audio codec TEMPO 92HD91\n*   Line-out/MIC\n*   Super I/O NCT6126D\n*   FAN Conn.\n*   DB40 conn.\n*   TPM 2.0 NPCT760AABYX\n*   BUS SW 74CBTLV3257\n*   BIOS ROM MX25L25673GM\n*   DC 12-24V\n*   SP339EER (two instances)\n*   RS232/422/482 x2 (DB9 CN) (two instances)\n\n**Connections:**\n\n*   SODIMM 1~2 4800MHz ↔ Processor Alder Lake S 35W/65W (Label: CH 0,1)\n*   DP1 CN ↔ Processor Alder Lake S 35W/65W (Label: DDI-C (RVP))\n*   Processor Alder Lake S 35W/65W ↔ HDMI LS PTN3360 (Label: DDI-B (RVP))\n*   HDMI LS PTN3360 ↔ HDMI1 CN (Label: HDMI1.4)\n*   Processor Alder Lake S 35W/65W ↔ Intel PCH H610E (Label: DMI x4 Gen4)\n*   M.2 M-Key Conn. 2280 (NVMe) ↔ Intel PCH H610E (Label: PCIe Gen3 x2)\n*   M.2 E-Key Conn. 2280 (WiFi/BT) ↔ Intel PCH H610E (Label: PCIe Gen1)\n*   SATA Conn. x2 (2.5' storage) ↔ Intel PCH H610E (Label: SATA x2)\n*   USB DONGLE ↔ Intel PCH H610E (Label: USB2.0)\n*   I2C Wafer x2 ↔ Intel PCH H610E (Label: I2C)\n*   Intel PCH H610E ↔ USB2.0 TYPE-A x4 (Label: USB2.0)\n*   Intel PCH H610E ↔ USB3.2 Gen1 TYPE-A x4 (Label: USB2.0 + USB3.2 Gen1)\n*   Intel PCH H610E ↔ Intel I226 x1, Intel I210 x2, Intel I219 x1 (Label: PCIe x3 GbE x1)\n*   Intel I226 x1, Intel I210 x2, Intel I219 x1 ↔ 2.5G RJ45 x1, 1G RJ45 x3 (Label: MDI)\n*   Intel PCH H610E ↔ 8DI/8DO Wafer (Label: GPIO)\n*   8DI/8DO Wafer ↔ DI/DO DB26 (Label: Cable)\n*   Intel PCH H610E ↔ Audio codec TEMPO 92HD91 (Label: HD Audio)\n*   Audio codec TEMPO 92HD91 ↔ Line-out/MIC (Label: Cable)\n*   Intel PCH H610E ↔ Super I/O NCT6126D (Label: eSPI)\n*   Super I/O NCT6126D ↔ FAN Conn. (Label: FAN out)\n*   DC 12-24V → Intel PCH H610E\n*   Intel PCH H610E → DB40 conn.\n*   Intel PCH H610E → TPM 2.0 NPCT760AABYX (Label: SPI)\n*   Intel PCH H610E → BUS SW 74CBTLV3257 (Label: SPI)\n*   BUS SW 74CBTLV3257 → BIOS ROM MX25L25673GM (Label: SPI)\n*   Super I/O NCT6126D → SP339EER ↔ RS232/422/482 x2 (DB9 CN) (Label: Cable)\n*   Super I/O NCT6126D → SP339EER ↔ RS232/422/482 x2 (DB9 CN) (Label: Cable)](.mvp-3100-50m-41059-1000-10/712e1e550a4a1c6d73d181b509087458a170135972e7344f1a75ab52a0880a90.jpg)

Figure 1: Block diagram

This page intentionally left blank.

# 4 Mechanical Dimensions

# MVP-3100 Mechanical Dimensions

![The image shows a white document icon with a folded top-right corner. Faint horizontal gray lines run across the document. A large, bold red checkmark is overlaid on the left side of the document.](.mvp-3100-50m-41059-1000-10/dc4da095d7af91dbccae52aba3a0d76f1f155e61ed3f6b533ecf28c9d6ee8c53.jpg)
NOTE:

All dimensions are in millimeters, unless noted.

![102\n720\n207\nMATRIX\n5.20\nø 10\n25.20\n26\n228](.mvp-3100-50m-41059-1000-10/7b15bdd8f42215fbf2c4c4d8e8b152f463562d534b7c2dc9c3b36b34f8fca8ef.jpg)

![192\nGND\nADLINK\nANT 1\n12-24 VDC\nV+\nV-\n1 2.3G\n2 1.0G\n3 1.0G\n4 1.0G\nU3 WD\nU2\nU1\nANT 2\nHDMI 1\nUSB 3 Gen1\nUSB 3 Gen1\nUSB 2\nUSB 2\nCOM 1\nCOM 2\nCOM 3\nDI / DO\n79.20](.mvp-3100-50m-41059-1000-10/92b53d7ca89b3de304118fbbcaeec619ce7e773da155c0671e15d404466bf623.jpg)

Figure 2: MVP-3100 mechanical dimensions

# MVP-3120 Mechanical Dimensions

![113\n720\n207\n5.20\n10\n2520\nMATRIX\n228](.mvp-3100-50m-41059-1000-10/0a542793b3a28a5dfb6dd70572fe8dd02bd844b29de21e28c44832a3f6bd89a6.jpg)

![192\nGND\nADLINK\nANT 1 12-24 VDC Vo V-\nDP++ 1\nHDMI 1\nUSB 3 (C:)\nUSB 3 (C:)\nUSB 2\nUSB 2\nU3 WD\nU2 U1\nANT 2\nCOM1 COM2 COM3 Di/DO\n158.20](.mvp-3100-50m-41059-1000-10/d3aed8f70f22887444808926ee0609883c1572e8aa62f38bb7566ad8b1512be5.jpg)

Figure 3: MVP-3120 mechanical dimensions

# 5 Getting Started

# Attach the DC Power Connector

Locate the DC power connector shown below, which is included in the accessory box. Insert it into the DC power input and secure it to the chassis using the captive screws.

![Technical line drawing of a mechanical component with multiple cylindrical ports and mounting brackets (no text or symbols)](.mvp-3100-50m-41059-1000-10/71a942c8dc9e356f5f6c90a73923a65664cf6e8cbd28ad4b739ef31a2642037f.jpg)

Connect a DC power source as described in Section 5.1.14: DC Power Input to the inputs of the DC power connector, making sure to use the correct input voltage and polarity.

![The image displays a standard warning symbol featuring a red equilateral triangle with a white border. Inside the red triangle is a large, white exclamation point.](.mvp-3100-50m-41059-1000-10/02f97c96c57532b2648616948abb6b826ac02b7d7e9a9203986205ee06953516.jpg)
WARNING: Avertissement:

Before providing DC power, ensure the voltage and polarity provided are compatible with the DC input. Improper input voltage and/or polarity can cause system damage.

Avant de fournir l’alimentation en courant continu (DC), assurez-vous que la tension et la polarité fournies sont compatibles avec l’entrée DC. Une tension et/ou une polarité incorrecte peuvent endommager le système.

# Mounting

Use SIX M4 screws (6mm) to attach the 2 included wall-mount brackets to the chassis, as shown. Utilisez SIX vis M4 (6 mm) pour fixer les deux supports muraux inclus au châssis, comme illustré.

![Technical line drawing of a mechanical assembly with mounting holes and internal components (no text or symbols)](.mvp-3100-50m-41059-1000-10/a06d41ff1ae4ae2c9a29d6356c847d42012695dcdf0023767caa824464f28604.jpg)

For the specifications of the screws used to mount the product to the wall, refer to the following recommendations:

Mount the device using six M4 screws (8 mm length) through the six mounting holes indicated below, following the spacing dimensions of the bracket holes. (Recommended torque: 6 kgf·cm).

Pour les spécifications des vis utilisées pour fixer le produit au mur, vous pouvez vous référer aux recommandations/suggestions suivantes.

Fixez l’appareil au mur à l’aide de 6 vis M4 de 8 mm de longueur, en utilisant les 6 trous de fixation indiqués cidessous, selon les dimensions d’espacement des trous dans le support. (Le couple est de 6 kgf/cm.)

![Mounting hole](.mvp-3100-50m-41059-1000-10/ed52c5f3b8e7c415c481c035dd04192d0c88e0c212260cff5aff1cc0b91d6076.jpg)

![The image displays a red triangular warning sign with rounded corners containing a white exclamation point in the center, set against a white background framed by black vertical lines on the left and right edges.](.mvp-3100-50m-41059-1000-10/11cd25ed1450e1fdef4c2f14980f2eb08ae20992fd72d886521ecd3bdbe54b2a.jpg)
WARNING: Avertissement:

While the configuration shown may suggest otherwise due to the presence of antenna ports, for safety, the device should ONLY be wall-mounted with the front and rear panels on the sides — NEVER on the top or underside.

Même si la configuration peut indiquer le contraire en raison de la présence de ports d’antenne, pour des raisons de sécurité, l’appareil doit être fixé au mur uniquement avec les panneaux avant et arrière sur les côtés, et jamais sur le dessus ou le dessous.

Once final assembly is completed, mount the MVP-3100 on the wall via screw holes. The I/O connectors must not face downward. We recommend mounting the MVP-3100, as shown.

Une fois l’assemblage final terminé, fixez le MVP-3100 au mur à l’aide des trous de vis. Les connecteurs d’E/S ne doivent pas être orientés vers le bas. Il est recommandé de monter le MVP-3100 tel qu’illustré.

![Technical line drawing of a mechanical housing or enclosure component (no text or symbols)](.mvp-3100-50m-41059-1000-10/4d7ba12109aa20a0c0e247e59217a7c1bdfcc0d684fe1bd420f25bf0c6cc0d13.jpg)

# Dimension Limitations for the Expansion Card

The following diagram shows the PCIe/PCI expansion card dimension limitations.

![18.74](.mvp-3100-50m-41059-1000-10/40571f74d02eaa278c847084fefc620c63a8d840f2e8c3e249d97fd3d25e05cc.jpg)

![201.90\n111.15](.mvp-3100-50m-41059-1000-10/3748cfaef702dd0426b057f8d0620cd3d21651bcbbc6cedbf9a82209d10ff20f.jpg)

This page intentionally left blank.

# 6 System Layout

# External I/O Connector Locations

The MVP-3100 Series provides the following front and side panel access features.

![A\nB\nC\nD\nE\nF\nG\nH\nI\nJ\nK\nL\nM\nANT 1\nGND\n12-24 VDC\nV+ V-\nADLINK\nDP++ 1\nHDMI 1\n1 2.5G\n2 1.0G\n3 1.0G\n4 1.0G\nUSB 3 Gen1\nUSB 3 Gen1\nUSB 2\nUSB 2\nU3 WD\nU2\nU1\nANT 2\nCOM 1\nCOM 2\nCOM 3\nDI/DO\nN\nO\nP\nQ\nR](.mvp-3100-50m-41059-1000-10/bee5449a481dc496407afbdfbbd3c9d511fca20f28b9312ded1e6e021c9ec293.jpg)

Figure 4: External I/O connector locations

Table 1: External I/O connector descriptions

<table><tr><td>Item</td><td>Description</td></tr><tr><td>A</td><td>Antenna 1</td></tr><tr><td>B</td><td>Ground</td></tr><tr><td>C</td><td>DC Power Input</td></tr><tr><td>D</td><td>DisplayPort</td></tr><tr><td>E</td><td>HDMI</td></tr><tr><td>F</td><td>2.5G Ethernet (Intel I226-V)</td></tr><tr><td>G</td><td>USB 3.2 Gen1</td></tr><tr><td>H</td><td>1.0G Ethernet (Intel I210-IT)</td></tr><tr><td>I</td><td>USB 2.0</td></tr><tr><td>J</td><td>1.0G Ethernet (Intel I219-V)</td></tr><tr><td>K</td><td>External Power Button</td></tr><tr><td>L</td><td>Power Button</td></tr><tr><td>M</td><td>Antenna 2</td></tr><tr><td>N</td><td>COM Port (RS-232/422/485)</td></tr><tr><td>O</td><td>COM Port (RS-232)</td></tr><tr><td>P</td><td>Digital Input/Output</td></tr><tr><td>Q</td><td>Audio MIC-in</td></tr><tr><td>R</td><td>Audio Line-out</td></tr></table>

# Mainboard Top/Bottom Connector Locations

Top side

![Circuit board layout diagram with labeled components A, B, C, D, and E, showing various electronic components and traces.](.mvp-3100-50m-41059-1000-10/8e0d98a6eeef3b3c5ec98e24ccf0e6b6dd7e2938066b8ef0e05e43b51610f87f.jpg)

Figure 5: Mainboard connector locations (Top)

Table 2: Mainboard connector descriptions (Top)

<table><tr><td>Item</td><td>Description</td></tr><tr><td>A</td><td>M.2 M Key</td></tr><tr><td>B</td><td>CPU Socket</td></tr><tr><td>C</td><td>DDR5 SO-DIMM1</td></tr><tr><td>D</td><td>DDR5 SO-DIMM2</td></tr><tr><td>E</td><td>Flash ROM Socket (Debug)</td></tr></table>

Bottom side

![E\nD\nC\nB\nA\nG\nH\nF\nN\nM\nL\nK\nJ\nO\nI\nR\nS\nQ\nP](.mvp-3100-50m-41059-1000-10/c3ba26d00ac4d4e717f24bf9918dcca0d10cfba89b23921085b0dac328d9395f.jpg)

Figure 6: Mainboard connector locations (Bottom)

Table 3: Mainboard connector descriptions (Bottom)

<table><tr><td>Item</td><td>Description</td></tr><tr><td>A</td><td>Power FW Update Connector (Debug)</td></tr><tr><td>B</td><td>SATA connector for 2.5" SSD</td></tr><tr><td>C</td><td>USB 2.0 dongle</td></tr><tr><td>D</td><td>SATA connector for 2.5" SSD</td></tr><tr><td>E</td><td>System Fan Connector (12V)</td></tr><tr><td>F</td><td>PCIE GEN4 slot for BP Board</td></tr><tr><td>G</td><td>RTC Battery Connector</td></tr><tr><td>H</td><td>M.2 E Key</td></tr><tr><td>I</td><td>PCIE GEN4 + Power slot for BP Board</td></tr><tr><td>J</td><td>I2C Wafer 2 (I2C1)</td></tr><tr><td>K</td><td>I2C Wafer 1 (I2C0)</td></tr><tr><td>L</td><td>External Power/Reset BTN</td></tr><tr><td>M</td><td>DB40 Connector (Debug)</td></tr><tr><td>N</td><td>ESPI Connector (Debug)</td></tr><tr><td>O</td><td>FPC Connector for AFM Board_AFM1</td></tr><tr><td>P</td><td>External Power Connector for BP or AFM board</td></tr><tr><td>Q</td><td>FPC Connector for AFM Board_AFM2</td></tr><tr><td>R</td><td>Wafer for COM5 – 6 + DIDO + MIC + HP</td></tr><tr><td>S</td><td>Wafer for COM1 – 4</td></tr></table>

# 2-Solt Backplane Card

![A\nB\nC\nD\nE\nG\nF](.mvp-3100-50m-41059-1000-10/10d6214631c8d7620afe730dded144289867bfd68d42ef7b2eb6b7b62db90388.jpg)

Figure 7: 2-Solt backplane card locations

Table 4: 2-Solt backplane card descriptions

<table><tr><td>Item</td><td>Description</td></tr><tr><td>A</td><td>USB 2.0 dongle connector</td></tr><tr><td>B</td><td>PCI slot</td></tr><tr><td>C</td><td>PCI Express x16 slot</td></tr><tr><td>D</td><td>Direct SATA connector</td></tr><tr><td>E</td><td>Direct SATA connector</td></tr><tr><td>F</td><td>Extrta Power for PCIe x 16 slot (12V)</td></tr><tr><td>G</td><td>Power from mother board (12V)</td></tr></table>

# 7 Connectors and Jumpers

# External I/O Connectors

# Antenna Port

Antenna ports ANT1-2 support 2.4GHz/5GHz Wi-Fi (PN: 30-60125-1000-B0).

# Power Button

The power button is a non-latching push button with a blue LED indicator:

<table><tr><td>System Status</td><td>Power LED</td></tr><tr><td>Power on</td><td>Light on</td></tr><tr><td>Suspend (S3)</td><td>Blinking</td></tr><tr><td>Hibernation (S4)</td><td>Blinking</td></tr><tr><td>Power off (S5)</td><td>Light off</td></tr></table>

# LED Indicators

<table><tr><td>LED Indicator</td><td>Location</td><td>Color</td><td>Description</td></tr><tr><td>Watchdog (WD)</td><td>&lt;img src="images/8cece6502840253857434edbbfc3dbe71b186b42816b433dfc79eec3fda3a9f2.jpg"/&gt;</td><td>Yellow</td><td>When the watchdog timer starts, the LED remains on until the system successfully boots up.</td></tr><tr><td>Hard disk drive (HD)</td><td>&lt;img src="images/bf2e75c6d113a83144807ef63349b8e51b88f2d4668b3e1f63b7c5b5eddbe70d.jpg"/&gt;</td><td>Orange</td><td>When blinking, it indicates the SATA HDD is active.</td></tr><tr><td>Diagnostic (DG)</td><td>&lt;img src="images/40e83f90f591e09d3f478a21424dfd5e3f1c8149777cba3212eba7c19a4e2c39.jpg"/&gt;</td><td>Green</td><td>If lit continuously, it indicates no physical storage is connected. If blinking, it indicates no memory is installed in either SO-DIMM socket.</td></tr><tr><td>User define (U1)</td><td>&lt;img src="images/799e29f5316bbea8f50be75e35283a47d688b57869e762dd7d2d0c036707bf6e.jpg"/&gt;</td><td>Green</td><td>User-defined LED.</td></tr><tr><td>User define (U2)</td><td>&lt;img src="images/6b482d09d9294bdd3b6b94abd9afda7b2dc7967af6bf72eaeaa01e73a4eaf2fb.jpg"/&gt;</td><td>Green</td><td>User-defined LED.</td></tr><tr><td>User define (U3)</td><td>&lt;img src="images/a8e71577ab207ce4309ef53863d6243b6ea0360580202c60a0629092e2e37e71.jpg"/&gt;</td><td>Green</td><td>User-defined LED.</td></tr></table>

# PCI Express x16 Slot

One PCI Express x16 slot supports expansion with standard PCIe Gen4 cards and full PCI express x16 signals.

# PCI Slot

The MVP-3120 provides one PCI slot for expansion on the backplane board. Based on the ITE IT8892E PCIe to PCI bridge, the connection to the host system is achieved through a PCIe x1 Gen3 interface, supporting universal or 5V PCI 32-bit cards operating at 33MHz.

# External Power Button Connector

![The image shows a schematic diagram featuring a central square divided into four quadrants. Inside each quadrant, a blue number is followed by a small, empty square outline. The text is arranged as follows:\n\n*   Top left: **1 □**\n*   Bottom left: **2 □**\n*   Top right: **3 □**\n*   Bottom right: **4 □**\n\nThe central square is surrounded by a grid of intersecting horizontal and vertical lines extending outward.](.mvp-3100-50m-41059-1000-10/a4f5fadca961fb9a951f094ea9d746ed922682fcaca79882be7a6cf146267d76.jpg)

The MVP-3100 series provides an external power button connector to remotely power on/off the platform.

<table><tr><td>Pin #</td><td>Description</td></tr><tr><td>1</td><td>PWR_BTN-L</td></tr><tr><td>2</td><td>P_+5V0_A (LED PWR)</td></tr><tr><td>3</td><td>GND</td></tr><tr><td>4</td><td>PWR_LED (LED Control)</td></tr></table>

# Audio Jack

The MVP-3100 series provides two stereo audio ports (Mic-in, Line-out). Audio is controlled by the TEMPO 92HD91 chip.

# DisplayPort Connector

The DisplayPort connector on the front panel can connect to VGA, DVI, and DisplayPort monitors via DisplayPortto-VGA, DisplayPor-to-DVI, or DisplayPort-to-HDMI adapter cables, as well as DisplayPort cable.

<table><tr><td>Pin #</td><td>Description</td><td>Pin #</td><td>Description</td></tr><tr><td>1</td><td>CN_DDPx0+</td><td>11</td><td>GND</td></tr><tr><td>2</td><td>GND</td><td>12</td><td>CN_DDPx3-</td></tr><tr><td>3</td><td>CN_DDPx0-</td><td>13</td><td>CN_DDPx_AUX_SEL</td></tr><tr><td>4</td><td>CN_DDPx1+</td><td>14</td><td>CN_DDPx_CONFIG2</td></tr><tr><td>5</td><td>GND</td><td>15</td><td>CN_DDPx_AUX+</td></tr><tr><td>6</td><td>CN_DDPx1-</td><td>16</td><td>GND</td></tr><tr><td>7</td><td>CN_DDPx2+</td><td>17</td><td>CN_DDPxAUX-</td></tr><tr><td>8</td><td>GND</td><td>18</td><td>CN_DDPx_HPD</td></tr><tr><td>9</td><td>CN_DDPx2-</td><td>19</td><td>GND</td></tr><tr><td>10</td><td>CN_DDPx3+</td><td>20</td><td>CN_DDPx_PWR_CN</td></tr></table>

![19\n1\n20\n2](.mvp-3100-50m-41059-1000-10/4f42765bbf3911bd4c0c35ee3277c0b1c3bc9a498e75d0e4fae91af2d04eadac.jpg)

# HDMI Connector

The MVP-3100 series provides one HDMI connector for connecting to an external monitor.

<table><tr><td>Pin #</td><td>Description</td><td>Pin #</td><td>Description</td></tr><tr><td>1</td><td>CON_HDMI_TX2_P</td><td>11</td><td>GND</td></tr><tr><td>2</td><td>GND</td><td>12</td><td>CON_HDMI_CLK_N</td></tr><tr><td>3</td><td>CON_HDMI_TX2_N</td><td>13</td><td>N/C</td></tr><tr><td>4</td><td>CON_HDMI_TX1_P</td><td>14</td><td>N/C</td></tr><tr><td>5</td><td>GND</td><td>15</td><td>HDMII_SCL_SINK</td></tr><tr><td>6</td><td>CON_HDMI_TX1_N</td><td>16</td><td>HDMI_SDA_SINK</td></tr><tr><td>7</td><td>CON_HDMI_TX0_P</td><td>17</td><td>GND</td></tr><tr><td>8</td><td>GND</td><td>18</td><td>P_+5V0 _HDMI_CN</td></tr><tr><td>9</td><td>CON_HDMI_TX0_N</td><td>19</td><td>CON_HDMI_HPD_5V0</td></tr><tr><td>10</td><td>CON_HDMI_CLK_P</td><td></td><td></td></tr></table>

![19 17\n3 1\n18\n2](.mvp-3100-50m-41059-1000-10/79006ad0554d788a1d0d954b61dddc460254e176250cd65b1762aec18ba7a9e7.jpg)

# Digital I/O Connector

The MVP-3100 Series provides 8 channels of non-isolation digital input and 8 channels of non-isolation digital output circuits, with specifications details as follows.

8-channel Digital Input:

VIH: 2 to 5.25V
VIL: 0 to 0.8V

8-channel Digital Output:

• Output type: Open drain N-channel
• MOSFET driver with internal pull high of 200Ω resistance.
Source/Sink current for all channels: 24mA
• VOH: 2.4 to 5V
• VOL: 0 to 0.5V

Pin definition:

<table><tr><td>Pin #</td><td>Signal</td><td>Pin #</td><td>Signal</td><td>Pin #</td><td>Signal</td><td>Pin #</td><td>Signal</td></tr><tr><td>1</td><td>DI0</td><td>8</td><td>DI7</td><td>15</td><td>N/C</td><td>22</td><td>DO3</td></tr><tr><td>2</td><td>DI1</td><td>9</td><td>GND</td><td>16</td><td>N/C</td><td>23</td><td>DO4</td></tr><tr><td>3</td><td>DI2</td><td>10</td><td>N/C</td><td>17</td><td>N/C</td><td>24</td><td>DO5</td></tr><tr><td>4</td><td>DI3</td><td>11</td><td>N/C</td><td>18</td><td>GND</td><td>25</td><td>DO6</td></tr><tr><td>5</td><td>DI4</td><td>12</td><td>N/C</td><td>19</td><td>DO0</td><td>26</td><td>DO7</td></tr><tr><td>6</td><td>DI5</td><td>13</td><td>N/C</td><td>20</td><td>DO1</td><td></td><td></td></tr><tr><td>7</td><td>DI6</td><td>14</td><td>N/C</td><td>21</td><td>DO2</td><td></td><td></td></tr></table>

![9\n1\n26\n19](.mvp-3100-50m-41059-1000-10/dbf7add09f7d826264c4013ce9e661449464659770b321d70a5c58e3b12ee8ed.jpg)

Digital input circuit:

![+3.3V\n2.2K\nDI_IN\nD\nG\nMOS\nS\n100K\nDI_GND](.mvp-3100-50m-41059-1000-10/ba86e2951dbe2f1175e6b5e2646fc147e447bcf51271cb8ab2d12e19b0664bfe.jpg)

Digital output circuit:
![+5.0V\n200\nD\nDOUT\n2.2K\nG\nMOS\nS](.mvp-3100-50m-41059-1000-10/471c0aa9ee173481a900e2ffc970eb740c4bf552d8291ddbb8ccc4b207fa0878.jpg)

# USB 2.0 Ports

All USB 2.0 ports support data transfer speeds up to 480 Mbps.

# USB 3.2 Gen1 Ports

All USB 3.2 Gen1 ports support data transfer speeds of up to 5 Gbps.

# Ethernet Ports

Only Ethernet port 1 on the front panel supports up to 2.5 Gbps with Intel I226-V. The other ports support up to 1.0 Gbps with the Intel I210-IT and Intel I219-V.

Active/Link LED Indicators:

<table><tr><td>LED color</td><td>Status</td><td>Description</td></tr><tr><td rowspan="3">Yellow</td><td>Off</td><td>Ethernet port is disconnected.</td></tr><tr><td>On</td><td>Ethernet port is connected but inactive.</td></tr><tr><td>Flashing</td><td>Ethernet port is connected and active.</td></tr></table>

![The image displays a schematic diagram of an RJ45 connector with blue text at the top. On the left, the text reads 'Speed,' and on the right, it reads 'Active/Link.' The diagram features a top section with two rectangular outlines on either side of a central block, and below that is a row of eight vertical lines representing the connector's pins.](.mvp-3100-50m-41059-1000-10/dd8e68c9e75b0cf7fba292921fa13a1517b048584824936b64bd22efac51e7a9.jpg)

Speed LED Indicators:

<table><tr><td>LED color</td><td>Status</td><td>Description</td></tr><tr><td rowspan="3">Green/Orange</td><td>Off</td><td>10/100 Mbps</td></tr><tr><td>Green</td><td>1000 Mbps</td></tr><tr><td>Orange</td><td>2500 Mbps</td></tr></table>

# DC Power Input

Use an approved power source certified by IEC or UL. The maximum operational altitude is 2000 m with an output that meets LPS and SELV (ES1) circuit requirements.

Power Source Rating:

<table><tr><td>Source</td><td>Voltage</td><td>Current</td></tr><tr><td>DC power source</td><td>12 to 24V DC</td><td>19.2A to 9.6A min.</td></tr><tr><td>AC to DC adapter</td><td>24V DC</td><td>9.6A min.</td></tr></table>

![This image is a schematic line drawing of a rectangular component. A central section contains two vertical, battery-like outlines side-by-side. Above this central section are blue text labels reading 'V+' on the left and 'V-' on the right. Flanking the central section are two outer rectangular areas, each containing a single circle.](.mvp-3100-50m-41059-1000-10/f7ea5ac728249da3aba2bb0d643718c49d8b64f4f4aa7f3cefd4e0b5710bbff9.jpg)

![The image displays a standard warning sign featuring a red triangle with a white exclamation mark centered inside it.](.mvp-3100-50m-41059-1000-10/7167c7f8503ca583f73a690661e3947b25ccfc5cc52ea34f4de2795b187e5eb1.jpg)
WARNING: Avertissement:

Before providing DC power, ensure the voltage and polarity pro- vided are compatible with the DC input. Improper input voltage and/or polarity can cause system damage.

Avant de fournir l’alimentation en courant continu (DC), assurez-vous que la tension et la polarité fournies sont compatibles avec l’entrée DC. Une tension et/ou une polarité incorrecte peut endommager le système.

# COM Port Connector

The MVP-3100 series provides COM ports through DB9 connectors. COM 1 & COM2 ports support RS-232/422/ 485 modes by BIOS setting, the COM 3 supports RS-232 mode.

COM Port Pin Definition:

<table><tr><td>Pin</td><td>RS-232</td><td>RS-422</td><td>RS-485</td></tr><tr><td>1</td><td>DCD#</td><td>TXD422-</td><td>485DATA-</td></tr><tr><td>2</td><td>RXD</td><td>TXD422+</td><td>485DATA+</td></tr><tr><td>3</td><td>TXD</td><td>RXD422+</td><td>N/S</td></tr><tr><td>4</td><td>DTR#</td><td>RXD422-</td><td>N/S</td></tr><tr><td>5</td><td>GND</td><td>GND</td><td>GND</td></tr><tr><td>6</td><td>DSR#</td><td>N/S</td><td>N/S</td></tr><tr><td>7</td><td>RTS#</td><td>N/S</td><td>N/S</td></tr><tr><td>8</td><td>CTS#</td><td>N/S</td><td>N/S</td></tr><tr><td>9</td><td>RI#</td><td>N/S</td><td>N/S</td></tr></table>

![1\n5\n6\n9](.mvp-3100-50m-41059-1000-10/87ad73736d3d92270db6a200af2c9654fa13cdf510a643ba9fc634be93b2df0a.jpg)

# Internal I/O Connectors

# SATA Connector

The SATA connector supports transfer up to 6.0Gb/s (600MB/s).

# USB 2.0 Connector

For the MVP-3100, a USB 2.0 Type-A connector is provided on the mainboard for an internal USB dongle. For the MVP-3120, the connector is located on the backplane.

# System Fan Connector

The system fan connector provides C 12V DC power for the optional fan module.

<table><tr><td>Pin #</td><td>Description</td></tr><tr><td>1</td><td>FAN_GND</td></tr><tr><td>2</td><td>12V IN PWR</td></tr><tr><td>3</td><td>FAN TACH</td></tr><tr><td>4</td><td>FAN PWM</td></tr></table>

![The image displays a schematic diagram of a rectangular outline, resembling a socket or faceplate. At the top center within the large rectangle is a smaller, horizontal rectangular outline. Below this, a row of four small square outlines is positioned horizontally. Beneath the third square from the left is the number '1' in blue.](.mvp-3100-50m-41059-1000-10/7e534708ab821a9df6e2ded2cd858f1349f81ff51fc969d35ff9923224c527f3.jpg)

# External Power/Reset Header

An internal header is provided for the Power and Reset buttons.

<table><tr><td>Pin #</td><td>Description</td></tr><tr><td>1</td><td>PWR_BTN-L</td></tr><tr><td>2</td><td>GND</td></tr><tr><td>3</td><td>GND</td></tr><tr><td>4</td><td>RESET_BTN-L</td></tr></table>

![The image displays a schematic line drawing enclosed within a rectangular border. Inside, a central shape resembling a connector or socket features a base and a top section containing four vertical rectangular slots arranged in a row. A horizontal line separates the lower portion of this central shape. To the right of the central shape, near its bottom right corner, is the blue number '1'.](.mvp-3100-50m-41059-1000-10/9ef8f2473c20e59363c857fa10e7e47120e2bd80e5e6050ca2c840cb6b3ee0ca.jpg)

# I2C Wafer

There are two I2C connectors supporting 3.3v or 5v.

<table><tr><td>Pin #</td><td>Signal (I2C0)</td><td>Signal (I2C1)</td></tr><tr><td>1</td><td>P_+5V0_S</td><td>P_+5V0_S</td></tr><tr><td>2</td><td>P_+3V3_S</td><td>P_+3V3_S</td></tr><tr><td>3</td><td>PCH_I2C0_SDA_S</td><td>PCH_I2C1_SDA_S</td></tr><tr><td>4</td><td>PCH_I2C0_SCL_S</td><td>PCH_I2C1_SCL_S</td></tr><tr><td>5</td><td>I2C0_GPIO</td><td>I2C1_GPIO</td></tr><tr><td>6</td><td>GND</td><td>GND</td></tr></table>

![Pure electrical connector pinout diagram without any text or symbols](.mvp-3100-50m-41059-1000-10/196f2fddb6b8c3597a6a7cb76643df61293fe8ec227113b99e7c426123284faf.jpg)

# External Power Connector for BP or AFM Board

The external power connector provides 12V DC power for a backplane or an AFM board.

<table><tr><td>Pin #</td><td>Description</td></tr><tr><td>1</td><td>GND</td></tr><tr><td>2</td><td>GND</td></tr><tr><td>3</td><td>VDC_CN</td></tr><tr><td>4</td><td>VDC_CN</td></tr></table>

![The image displays a schematic line drawing of a square panel or wall plate. Inside the outer frame, there are four smaller square sections arranged in a 2x2 grid. Each inner square contains a blue circle with a white number centered inside it.\n\nThe numbers are arranged as follows:\n- **Top Row:** The number **3** is on the left, and the number **1** is on the right.\n- **Bottom Row:** The number **4** is on the left, and the number **2** is on the right.\n\nA small rectangular notch is visible at the top center of the outer frame. Lines extend from the left side of the inner squares towards the left edge of the diagram.](.mvp-3100-50m-41059-1000-10/3bb26406a1d3f4c45230e49258ef5ed26140a0fb6dfcb5ae867b5c5d237e9d6d.jpg)

# 8 Driver Installation

Download the drivers for MVP-3100/MVP-3120 from the official product page below:

https://www.adlinktech.com/products/industrial\_pcs\_fanless\_embedded\_pcs/expandablefanlessembeddedcompute rs/mvp-3100

# Safety Instructions

For user safety, please read and follow all instructions, Warnings, Cautions, and Notes marked in this manual and on the associated device before handling/operating the device, to avoid injury or damage.

► Read these safety instructions carefully.
► Keep the User’s Manual for future reference.
► Read the Specifications section of this manual for detailed information on the recommended operating environment.

► The operating temperature of the product can be 40 degrees (powered by adapter) or 50 degrees (powered by DC source).

► It is recommended that the device be installed in Information Technology Rooms that are in accordance with Article 645 of the National Electrical Code and NFPA 75.

► When installing/mounting or uninstalling/removing device is required:

[> Turn off power and unplug any power cords/cables.
[> Reinstall all chassis covers before restoring power.

► To avoid electrical shock and/or damage to device:

[> Keep device away from water or liquid sources.
[> Keep device away from high heat or humidity.
[> Keep device properly ventilated (do not block or cover ventilation openings).
[> Always use recommended voltage and power source settings.

[> Always install and operate device near an easily accessible electrical outlet.

[> Secure the power cord (do not place any object on/over the power cord) and connect it to a socket-outlet with earthing connection.

[> Only install/attach and operate device on stable surfaces and/or recommended mountings.

[> If this apparatus is powered by adapter or DC source. Please ensure adapter or DC source should be keep earth connection if it has protective earthing.

► If the device will not be used for long periods of time, turn off and unplug from its power source.

► Never attempt to repair the device, which should only be serviced by qualified technical personnel using suitable tools.

► A Lithium-type battery may be provided for uninterrupted backup or emergency power.

![A yellow triangular warning sign with a black border containing a black exclamation point in the center.](.mvp-3100-50m-41059-1000-10/32e34acc3008f4e805e6c52429df08620392827f3e476a31755f5f1bda06d75e.jpg)
CAUTION:

Risk of explosion if battery is replaced with one of an incorrect type; please dispose of used batteries appropriately.

► The device must be serviced by authorized technicians when:
[> The power cord or plug is damaged.
[> Liquid has entered the device interior.
[> The device has been exposed to high humidity and/or moisture.
[> The device is not functioning or does not function according to the User’s Manual.
[> The device has been dropped and/or damaged and/or shows obvious signs of breakage.

► Disconnect the power supply cord before loosening the thumbscrews and always fasten the thumbscrews with a screwdriver before starting the system up.

► It is recommended that the device be installed only in a server room or computer room where access is:

[> Restricted to qualified service personnel or users familiar with restrictions applied to the location, reasons therefore, and any precautions required.

► Only afforded by the use of a tool or lock and key, or other means of security, and controlled by the authority responsible for the location.

► Pay attention to the symbol below. Touching this surface may cause bodily injury. To reduce the risk, allow the surface to cool before touching.

![A yellow triangular warning sign with a thick black border. Inside the triangle is a black symbol showing three wavy vertical lines rising above a horizontal line.](.mvp-3100-50m-41059-1000-10/82042ac72a174f1785610f4285ec2d5251db870a906bc859ab477f4c04da7924.jpg)

# BURN HAZARD

Touching this surface could result in bodily injury.

To reduce risk, allow the surface to cool before touching.

 The equipment is not intended to be installed and used in a home, school or public area accessible to the general population. (If the thumb screw is used.)
 The knurled thumb screws (If the thumb screw is used.) with slotted heads for each Node module should be tighten the screws with a tool after both initial installation and subsequent using.
 The wire of terminal block should be fixed by authorized technician and recommendation for wire range: 30-10 sol/str, wire type: Cu, torque (Lb IN.): 5.3

# Consignes de sécurité

Pour la sécurité de l'utilisateur, veuillez lire et suivre toutes les instructions, avertissements, mises en garde et remarques figurant dans ce manuel et sur l'appareil associé avant de manipuler/utiliser ce dernier, afin d'éviter toute blessure ou tout dommage.

Lisez attentivement ces consignes de sécurité.
 Conservez le manuel d'utilisation pour référence ultérieure.
Consultez la section « Spécifications » de ce manuel pour obtenir des informations détaillées sur l'environnement d'utilisation recommandé.
La température de fonctionnement du produit peut être de 40 degrés (alimenté par un adaptateur) ou de 50 degrés (alimenté par une source CC).
Il est recommandé d'installer l'appareil dans des salles informatiques conformes à l'article 645 du Code national de l'électricité et à la norme NFPA 75.

Lors de l'installation, du montage ou de la désinstallation/du retrait de l'appareil :

[> Coupez l'alimentation et débranchez tous les cordons/câbles d'alimentation.
[> Remettez tous les capots du châssis en place avant de rétablir l'alimentation.

 Pour éviter tout choc électrique et/ou tout dommage à l'appareil :

[> Tenir l'appareil à l'écart de l'eau ou de toute source de liquide.
[> Tenir l'appareil à l'écart des sources de chaleur et d'humidité élevées.
[> Veiller à une ventilation adéquate de l'appareil (ne pas obstruer ni couvrir les ouvertures de ventilation).
[> Toujours utiliser la tension et la source d'alimentation recommandées.
[> Toujours installer et utiliser l'appareil à proximité d'une prise électrique facilement accessible.
[> Fixer le cordon d'alimentation. (Ne pas placer d'objet sur/au-dessus du cordon d'alimentation.)
[> Installer, fixer et utiliser l'appareil uniquement sur des surfaces stables et/ou avec les supports recommandés.
[> Si cet appareil est alimenté par un adaptateur ou une source CC, veuillez vous assurer que l'adaptateur ou la source CC est bien relié à la terre s'il est équipé d'une mise à la terre de protection.

 Si l'appareil n'est pas utilisé pendant une période prolongée, éteindre et débrancher l'appareil.

Ne jamais tenter de réparer l'appareil ; son entretien doit être confié à un technicien qualifié utilisant les outils appropriés.

Une batterie au lithium peut être fournie pour une alimentation de secours ou d'urgence ininterrompue.

Risque d'incendie ou d'explosion en cas de remplacement de la batterie par un type incorrect. Jetez les batteries usagées avec précaution.

L'appareil doit être réparé par des techniciens agréés lorsque :

[> Le cordon d'alimentation ou la prise sont endommagés.
[> Du liquide a pénétré à l'intérieur de l'appareil.
[> L'appareil a été exposé à une forte humidité.
[> L'appareil ne fonctionne pas ou ne fonctionne pas conformément au manuel d'utilisation.
[> L'appareil est tombé et/ou est endommagé et/ou présente des signes évidents de casse.

 Débranchez le cordon d'alimentation avant de desserrer les vis à oreilles et serrez-les toujours avec un tournevis avant de démarrer le système.  Il est recommandé d'installer l'appareil uniquement dans une salle de serveurs ou une salle informatiqu dont l'accès est :

[> Réservé au personnel de maintenance qualifié ou aux utilisateurs connaissant les restrictions applicables au lieu, leurs raisons et les précautions requises.

Uniquement autorisé par l'utilisation d'un outil, d'un cadenas et d'une clé, ou de tout autre moyen de sécurité, et contrôlé par l'autorité responsable du lieu.
Tenez compte du symbole ci-dessous. Tout contact avec cette surface peut entraîner des blessures corporelles. Pour réduire le risque, laissez la surface refroidir avant de la toucher.

<table><tr><td></td><td>RISQUE DE BRÛLURESNe touchez pas cette surface, cela pourrait entraîner des blessures.Pour éviter tout danger, laissez la surface refroidir avant de la toucher.</td></tr></table>

Cet équipement n'est pas destiné à être installé et utilisé dans une maison, une école ou un lieu public accessible au grand public (si la vis moletée est utilisée).
Les vis moletées (si la vis moletée est utilisée) à tête fendue de chaque module Node doivent être serrées à l'aide d'un outil après l'installation initiale et les utilisations ultérieures.
Le fil du bornier doit être fixé par un technicien agréé et la recommandation pour la gamme de fils : 30- 10 sol/str, type de fil : Cu, couple (Lb IN.) : 5,3

# Getting Services

Ask an Expert: https://www.adlinktech.com/en/Askanexpert

# ADLINK Technology, Inc.

Address: No. 66, Huaya 1st Road, Guishan District Taoyuan City 333, Taiwan

Tel: +886-3-216-5088

Fax: +886-3-328-5723

Email: service@adlinktech.com

# Ampro ADLINK Technology, Inc.

Address: 6450 Via Del Oro, San Jose, CA 95119-1208, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

Fax: +1-408-600-1189

Email: info@adlinktech.com

# ADLINK Technology (China) Co., Ltd.

Address: 300 Fang Chun Rd., Zhangjiang Hi-Tech Park, Pudong New Area Shanghai, 201203 China

Tel: +86-21-5132-8988

Fax: +86-21-5132-3588

Email: market@adlinktech.com

# ADLINK Technology GmbH

Address: Hans-Thoma-Strasse 8-10, 68163, Mannheim, Germany

Tel: +49-621-43214-0

Fax: +49-621 43214-30

Email: emea@adlinktech.com

Please visit the Contact page at www.adlinktech.com for information on how to contact the ADLINK regional office nearest you.
[🔗 Link to the original document](.mvp-3100-50m-41059-1000-10/mvp-3100-50m-41059-1000-10.pdf)