# MVP-5000 Series

High Performance 6th Generation Intel $^{®}$ Core $^{TM}$

i7/i5/i3 Fanless Computer

MVP-5001/MVP-5002/MVP-5003

User's Manual

![Front view of a black ADLINK Technology Inc. server chassis with ports, connectors, and ventilation slots (no readable text or symbols beyond branding)](.mvp-5000-series-manual-en-20170407-v1/6b00b4fead4cb376d3cc670ccafc072a6d03f2a8ea7134c35f89fe2a29b4e72b.jpg)

Manual Rev.: 2.00

Revision Date: February 21, 2016

Part No: 50-1Z228-2000

Revision History

<table><tr><td>Revision</td><td>Release Date</td><td>Description of Change(s)</td></tr><tr><td>2.00</td><td>February 21, 2016</td><td>Initial Release</td></tr><tr><td></td><td></td><td></td></tr></table>

# Preface

# Copyright 2017 ADLINK Technology, Inc.

This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

# Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

# Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.

# Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

# Conventions

Take note of the following conventions used throughout this manual to make sure that users perform certain tasks and instructions properly.

![The image displays an icon of a white document with a folded top corner and faint gray horizontal lines. A large, bold red checkmark is superimposed diagonally across the document, indicating approval or completion.](.mvp-5000-series-manual-en-20170407-v1/e81941dea6085a20d14ed9fd4feed0b015dd51b9f4799dddb8c89df7c699ee9f.jpg)
NOTE:

Additional information, aids, and tips that help users perform tasks.

![A yellow triangular warning sign with a black border containing a centered black exclamation point.](.mvp-5000-series-manual-en-20170407-v1/0b904ccbde41921f450fab8f92460223453e73d7e18250c943d2026569dac968.jpg)
CAUTION:

Information to prevent minor physical injury, component damage, data loss, and/or program corruption when trying to complete a task.

![The image displays a maroon triangle pointing upward, containing a large white exclamation mark in its center. The triangle is bordered by thick black lines along its top and left edges against a white background.](.mvp-5000-series-manual-en-20170407-v1/0d1c10fd86a8c32fcaedc25f7f6add0dd2cfe8039ff5aed87e1f95430fe5ea6a.jpg)
WARNING:

Information to prevent serious physical injury, component damage, data loss, and/or program corruption when trying to complete a specific task.

# Table of Contents

# Preface...... iii

# List of Tables.... xi

# List of Figures ...... xiii

# 1 Introduction ...... 1

1.1 Overview.... 1
1.2 Features.... 1
1.3 Specifications.... 2
1.4 Schematics and Dimensions 5
1.5 Front Panel I/O Connectors 9

1.5.1 Power Button 10
1.5.2 LED Indicators 10
1.5.3 Reset Button.... 10
1.5.4 DisplayPort Connectors.... 10
Display Options 11
1.5.5 Digital I/O Connector 12
8-channel Digital Input 12
8-channel Digital Output 12
1.5.6 DVI-D Connector 15
1.5.7 VGA Connector 15
1.5.8 USB 2.0 Ports....16
1.5.9 Gigabit Ethernet Ports 16
1.5.10 USB 3.0 Ports....18
1.5.11 DC Power Connector.... 18
1.5.12 COM Port Connectors 19

1.6 Rear-Mounted CFast Host Connector 19

1.7 Internal I/O Connectors.... 21

1.7.1 5V GPS Module Power Header 22

1.7.2 3.3V GPS Module Power Headers 23

1.7.3 USB 2.0 Connector....23

1.7.4 Mini PCIe Socket 23

1.7.5 SATA Connector....23

1.7.6 9V Fan Connector....24

1.7.7 Clear CMOS Jumper 24

1.7.8 Extended PWR/RESET header 25

1.7.9 USIM Slot....25

# 2 Getting Started 27

2.1 Unpacking Checklist 27

2.2 Installing Hard Disk Drives 27

2.3 Installing CFast Cards.... 31

2.4 Wall-mounting the MVP-5000 33

2.5 Driver Installation 35

2.6 Adapter 36

# A Appendix: Power Consumption ....37

A.1 Power Consumption Reference 37

# B Appendix: BIOS Setup....39

B.1 Main 39

BIOS Information 40

Platform Information 40

FW Information 40

System Time/System Date 41

B.2 Advanced 41

B.2.1 CPU Configuration....42

Hyper-Threading 43

Active Processor Cores 43

Intel Virtualization Technology 43

CPU AES 43

Intel(R) SpeedStep(tm) 43

CPU C States 43

Intel TXT(LT) Support 43
TCC Activation Offset 43

B.2.2 Memory Configuration 44

B.2.3 System Agent (SA) Configuration....45

VT-d 45

B.2.4 Graphics Configuration.... 46

GTT Size 46
Aperture Size 46
DVMT Pre-Allocated 46
DVMT Total Gfx Mem 46

B.2.5 Onboard Device Configuration 47

Serial Port 1 to 4 Configuration 47
LAN #1 (Intel I211AT) 47
LAN #1(I211AT) Launch PXE OpROM 47
LAN #2 (Intel I211AT) 47
LAN #2(I211AT) Launch PXE OpROM 48
LAN #3 (Intel I211AT) 48
LAN #3(I211AT) Launch PXE OpROM 48
Serial Port Console Redirection 48

B.2.6 Advanced Power Management 49

State After G3 49
State After G3 50
RTC Wake system from S5 50
BIOS POST Watchdog 50

B.2.7 USB Configuration....50

Legacy USB Support 50
XHCI Hand-off 51
USB Mass Storage Driver Support 51
Port 60/64 Emulation 51
USB transfer time-out 51
Device reset time-out 51
Device power-up delay 51

B.2.8 SATA Configuration....52

SATA Port and CFast Card 52

B.2.9 CSM Configuration 53

CSM Support 53

GateA20 Active 53

Option ROM Messages 53

Boot option filter 53

Network 54

Storage 54

Video 54

Other PCI devices 54

B.2.10 Network Stack Configuration 54

B.2.11 PC Health Status 55

B.3 Security 56

Administrator Password 56

User Password 56

RTC Lock 56

BIOS Lock 57

B.4 Boot 57

Setup Prompt Timeout 57

Bootup Num-Lock State 57

Quiet Boot 58

Fast Boot 58

Boot Option Priorities 58

B.5 Save & Exit 60

Discard Changes and Exit 60

Save Changes and Reset 60

Discard Changes 60

Restore Defaults 60

Save as User Defaults 61

Restore User Defaults 61

Launch EFI Shell from filesystem device 61

# C Appendix: Watchdog Timer (WDT) Function Library....63

C.1 WDT with API/Windows 63

AwlWatchdogGetCount 63

AwlWatchdogSetTrigger 63

# D Appendix: Digital Input/Output Function Library....65

D.1 DI/O with API/Windows.... 65

# Important Safety Instructions.... 69

# Getting Service.... 73

This page intentionally left blank.

# List of Tables

Table 1-1: LED Indicators....10

Table 1-2: DisplayPort Pin Assignments ...... 11

Table 1-3: Applicable Cable Types.... 11

Table 1-4: Maximum Available Resolutions with 2-Display Configuration.... 12

Table 1-5: Digital Input Connector Pin Legend....13

Table 1-6: Digital Output Connector Pin Legend 14

Table 1-7: DVI-D Connector Pin Legend 15

Table 1-8: VGA Connector Pin Legend 16

Table 1-9: Active/Link LED Indicators....17

Table 1-10: Speed LED Indicators.... 17

Table 1-11: DC Power Supply Connector Signals.... 18

Table 1-12: D-Sub 9p Signal Function of COM Ports....19

Table 1-13: Mainboard Connector Legend 21

Table 1-14: CFast Board Connector Legend....22

Table A-1: Power Consumption 37

This page intentionally left blank.

# List of Figures

Figure 1-1: MVP-5000 Functional Block Diagram....4

Figure 1-2: Front View....5

Figure 1-3: Left Side View....6

Figure 1-4: Top View....7

Figure 1-5: Rear View 7

Figure 1-6: Underside View....8

Figure 1-7: Front Panel 9

Figure 1-8: DisplayPort Connector....10

Figure 1-9: Digital I/O Connector Pin Assignment .... 13

Figure 1-10: Digital Input Circuit.... 14

Figure 1-11: Digital Output Circuit.... 14

Figure 1-12: DVI-D Connector Pin Assignment .... 15

Figure 1-13: VGA Connector Pin Assignment.... 15

Figure 1-14: Ethernet Port and LED Legend.... 17

Figure 1-15: DC Power Connector.... 18

Figure 1-16: COM Port.... 19

Figure 1-17: CFast Host Connector (on rear panel)....20

Figure 1-18: Mainboard I/O Connectors....21

Figure 1-19: CFast Board Connectors 22

Figure 1-20: Clear CMOS Jumper Setting 24

This page intentionally left blank.

# 1 Introduction

# 1.1 Overview

ADLINK's MVP-5000 series of value line fanless embedded computing platforms, incorporating the 6th Generation Intel® Core™ processor, provides single-side access for I/O ports, optimizing easy maintenance in industrial automation environments. The series retains the robust design of all ADLINK MXC/MXE lines, at a new extremely cost-effective price point. The MVP-5000 series supports DDR4 memory for more powerful computing and the Intel® HD Graphics 530 speeds graphics performance. Along with a versatile I/O array and flexible expansion capacity, the MVP-5000 Series fully satisfies all the needs of industrial automation with the performance demanded by central controller, detection equipment, signage, and kiosk applications. Fanless construction not only overcomes contaminant and noise challenges presented by harsh IA environments, the elimination of problematic structural elements that negatively affect MTBF greatly increases lifecycle expectations for the platform.

# 1.2 Features

▶ 6th Generation Intel $^{®}$ Core $^{™}$ i7/i5/i3 Skylake FCLGA1151 processor + H110 chipset
▶ 2 x DDR4 SO-DIMM socket, supporting up to 2 x 16GB DDR4 2133 SO-DIMM modules
▶ Supports 3 independent displays with 2x DisplayPort, 1x DVI-D, and 1x VGA ports
▶ 6 External USB ports (4x USB 3.0, 2x USB 2.0), 1 internal USB 2.0 port
▶ 3 Intel GbE LAN ports with teaming function
▶ Built-in 8CH DI and 8CH DO, 2 software-programmable RS-232/422/485 + 2 RS-232 ports
▶ CFast socket and SATA III port for 2.5" HDD/SSD installation
▶ Built-in wide-range 12V DC to 24V DC power input

▶ Fanless operation from $0^{\circ}$ C to $50^{\circ}$ C (w/ industrial SSD)

![An icon depicting a white document with horizontal lines and a folded top-right corner, featuring a large red checkmark in the center.](.mvp-5000-series-manual-en-20170407-v1/10ed056428e2f74d165ad888b054e3621495c8aa663eb6ef042b6bab1f76d057.jpg)
NOTE:

This option guarantees cold boot of the system at $0^{\circ}$ c and operation with 100% loading at $50^{\circ}$ without sacrificing CPU frequency. The industrial solid-state drive storage option is required.

1.3 Specifications

<table><tr><td></td><td>MVP-5001</td><td>MVP-5002</td><td>MVP-5003</td></tr><tr><td colspan="4">System Core</td></tr><tr><td>Processor</td><td>Intel®CoreTM i7-6700TE Quad Core, 2.4GHz, 8ML3 cache (Turbo Frequency up to 3.40 GHz)</td><td>Intel®CoreTM i5-6500TE Quad Core, 2.3GHz, 6ML3 cache (Turbo Frequency up to 3.30 GHz)</td><td>Intel®CoreTM i3-6100TE Dual Core, 2.7GHz, 4ML3 cache</td></tr><tr><td>Chipset</td><td colspan="3">Intel®Mobile Platform Controller Hub (H110)</td></tr><tr><td>Video</td><td colspan="3">2x DisplayPort (Supports DP1.2, resolution up to 4096x2304 @60Hz, 24bpp)1x DVI-D (Resolution up to 1920X1080)1x VGA up to 1920x1200</td></tr><tr><td>Memory</td><td colspan="3">4GB DDR4 2133MHz SODIMM, max. capacity 32GB with 2x SODIMM)</td></tr><tr><td colspan="4">I/O Interface</td></tr><tr><td>Ethernet</td><td colspan="3">3x Intel®GbE ports (3x Intel®Ethernet controller I211-AT)Supports teaming, Wake On LAN</td></tr><tr><td>Serial Ports</td><td colspan="3">2 software-programmable RS-232/422/485 (COM1 &amp; COM2) with auto flow control2 RS-232 (COM3 &amp; COM4)</td></tr><tr><td>USB</td><td colspan="3">4x external USB 3.02x external USB 2.01x internal USB 2.0 (optional)***All USB ports support up to 1.6A power supply</td></tr><tr><td>DI/O</td><td colspan="3">8CH DI8CH DO</td></tr><tr><td>Audio</td><td colspan="3">1 Mic-in and 1 Line-out</td></tr><tr><td colspan="4">Power Supply</td></tr><tr><td>DC Input</td><td colspan="3">Built-in wide-range 12 to 24V DC input3P pluggable connectors with latch (GND, V-, V+)</td></tr><tr><td>AC Input</td><td colspan="3">Optional 160 W external AC-DC adapter for AC input</td></tr><tr><td colspan="4">Storage</td></tr><tr><td>SATA</td><td colspan="3">Internal SATA-III port for 2.5" HDD/SSD installationHigh speed SATA 6 Gb/s support</td></tr><tr><td>CFast</td><td colspan="3">CFast (external,), supporting PI/O and DMA modes</td></tr><tr><td colspan="4">Mechanical</td></tr><tr><td>Fan Module</td><td colspan="3">Optional fan module, Smart Fan Control</td></tr><tr><td>Dimensions</td><td colspan="3">220(W) x 210(D) x 121(H) mm (8.67 x 8.27 x 4.77 in.)</td></tr><tr><td>Weight</td><td colspan="3">3.6 kg (7.94lb)</td></tr><tr><td>Mounting</td><td colspan="3">Wall-mount kit</td></tr><tr><td colspan="4">Environmental</td></tr><tr><td>Operating Temperature(Ambient w/o airflow)</td><td colspan="3">0°C to 50°C</td></tr><tr><td>Storage Temperature</td><td colspan="3">-40°C to 85°C (-40 to 185°F)excl. HDD/SSD/CFast</td></tr><tr><td>Humidity</td><td colspan="3">Approx. 95% @ 40°C (non-condensing)</td></tr><tr><td>ESD</td><td colspan="3">Contact +/-4 kV and Air +/-8 kV</td></tr><tr><td>Shock</td><td colspan="3">Operating, 100G, half sine 11 ms duration (w/ CFast or SSD)</td></tr><tr><td>EMC</td><td colspan="3">CE and FCC Class A</td></tr></table>

<table><tr><td>Power Supply (24VDC)</td><td>Power Off</td><td>System Idle*</td><td>System Full Load**</td><td>Recommended Power Supply***</td></tr><tr><td colspan="5">Integrated Embedded Computer</td></tr><tr><td>MVP-5001</td><td>3.1W</td><td>20.33 W</td><td>66.7 W</td><td>160W</td></tr><tr><td>MVP-5002</td><td>2.8 W</td><td>20.9 W</td><td>57.8 W</td><td>160W</td></tr><tr><td>MVP-5003</td><td>2.9 W</td><td>20.1 W</td><td>41.3 W</td><td>160W</td></tr></table>

\*Under Windows 10 IoT Enterprise desktop with no application programs executed
\*\*Under Windows 10 IoT Enterprise with 100% CPU utilization
\*\*\*Under conditions in which excessive environmental vibration may occur, it is recommended that an optional bracket be installed to secure USB and cable connectivity

![The diagram illustrates a hardware architecture centered around a processor, a platform controller hub, and various peripherals.\n\n**Processor Section (Top)**\n*   **Central Block:** 'Intel Core i7-6700TE 2.4GHz i5-6500TE 2.3GHz i3-6100TE 2.7GHz Processor'\n*   **Memory Connections:**\n    *   'Channel A DDR4 260 pin SODIMM' connects via 'DDR4 2133MHz'.\n    *   'Channel B DDR4 260 pin SODIMM' connects via 'DDR4 2133MHz'.\n*   **Display Connections:**\n    *   'DisplayPort 1' connects via 'DDPC'.\n    *   'DisplayPort 2' connects via 'DDPD'.\n    *   'DVI-D connector' connects via 'DVI' to 'NXP PTN3360D', which connects via 'DDPB'.\n    *   'VGA connector' connects via 'VGA' to 'NXP PTN3355D', which connects via 'EDP'.\n*   **Downward Connection:** Connects via 'DMI Gen3(8GT/s)' to the Platform Controller Hub.\n\n**Platform Controller Hub Section (Middle)**\n*   **Central Block:** 'Intel H110 Platform Controller Hub'\n*   **Upward Connection:** Receives connection via 'DMI Gen3(8GT/s)'.\n*   **Left Side (Audio & Ethernet/USB):**\n    *   'Line out & MIC in connector' connects via 'Audio' to 'ALC262', which connects via 'HDA'.\n    *   Three 'GbE controller Intel WGI211AT' blocks connect via 'PCIe x1'. Each controller connects via 'GBE I/F' to 'RJ45 & USB3.0 x 2 Connector' blocks (appears three times).\n    *   The 'RJ45 & USB3.0 x 2 Connector' blocks connect via 'USB3.0'.\n    *   One 'GbE controller Intel WGI211AT' connects via 'PCIe x1'. It connects via 'GBE I/F' to 'RJ45 & USB2.0 x 2 Connector'.\n    *   The 'RJ45 & USB2.0 x 2 Connector' connects via 'USB2.0'.\n*   **Right Side (Storage & I/O):**\n    *   Connects via 'SATA' to 'SATA port'.\n    *   Connects via 'SATA' to 'CFAST'.\n    *   Connects via 'USB2.0' to 'USB dongle'.\n    *   Connects via 'PCIE' to 'Mini PCIe With USIM'.\n    *   Connects via 'USB2.0' to '8DI connector'.\n    *   Connects via 'GPI' to '8DI connector'.\n    *   Connects via 'GPO' to '8DO connector'.\n*   **Downward Connection:** Connects via 'LPC' to the Super I/O chip.\n\n**Super I/O Section (Bottom)**\n*   **Central Block:** 'NCT6016D'\n*   **Left Connection:** Connects via 'COM x 4' to 'Dsub - 9 x4'.](.mvp-5000-series-manual-en-20170407-v1/0ff70ff53ef00ae63b6105f9cb9525ee43ec5d2e7f9e86414c3a8a7530ac732b.jpg)

Figure 1-1: MVP-5000 Functional Block Diagram

# 1.4 Schematics and Dimensions

![The image shows a white document icon with a folded upper-right corner and horizontal grey lines running across it. A large, thick red checkmark is superimposed over the document, stretching diagonally from the bottom left to the top right.](.mvp-5000-series-manual-en-20170407-v1/f330f0c52272ed6d9d9e6e358544b6a280c2f442e27a300b21a411aa1aaae1e1.jpg)

All dimensions shown are in mm (millimeters).

NOTE:

![220\nADLINK\nTECHNOLOGY INC.\n6\n0\nWD\nBD1\nE2\nVGA\n1\n2\n3\n4\n5\n6\n7\n8\n9\n10\n11\n12\n13\n14\n15\n16\n17\n18\n19\n20\n21\n22\n23\n24\n25\n26\n27\n28\n29\n30\n31\n32\n33\n34\n35\n36\n37\n38\n39\n40\n41\n42\n43\n44\n45\n46\n47\n48\n49\n50\n51\n52\n53\n54\n55\n56\n57\n58\n59\n60\n61\n62\n63\n64\n65\n66\n67\n68\n69\n70\n71\n72\n73\n74\n75\n76\n77\n78\n79\n80\n81\n82\n83\n84\n85\n86\n87\n88\n89\n90\n91\n92\n93\n94\n95\n96\n97\n98\n99\n100\n121 131.5](.mvp-5000-series-manual-en-20170407-v1/3303e3614d6cb4eab46510e0b48ff95ecf4a4767bb9829797a39abcb42a1d20f.jpg)

Figure 1-2: Front View

![Technical line drawing of a rectangular electronic device with hexagonal connectors and mounting points, labeled dimension 210 (no text or symbols beyond measurement lines)](.mvp-5000-series-manual-en-20170407-v1/f6cb92b8a9b23e695b051756b17d08eb9de6079735c57633ec23e2b875e7be0d.jpg)

Figure 1-3: Left Side View

![Pure electrical circuit lines without any symbols](.mvp-5000-series-manual-en-20170407-v1/0c50fe27e11186eb25324454bcdebf8eccc5583e49b1af23c6261ee9d9625fb5.jpg)

Figure 1-4: Top View

![Technical line drawing of a device casing with mounting feet and a labeled component (no text or symbols beyond 'Cfast' label)](.mvp-5000-series-manual-en-20170407-v1/1fcbe10771a364e211b9d0a321d6600715a031333fe045d1c1306179266fe015.jpg)

Figure 1-5: Rear View

![196\n85\n170\n85](.mvp-5000-series-manual-en-20170407-v1/9ecebb8f5722a32bf2b5e6d62319b9701f1e2f3742a71b561194d15cc92c8218.jpg)

Figure 1-6: Underside View

# 1.5 Front Panel I/O Connectors

![ADLINK\nTECHNOLOGY INC.\n12V ~ 24V DC IN\nV- GND V+\nVGA\nCOM4\nDI\nDO\nCOM1\nCOM2\nCOM3](.mvp-5000-series-manual-en-20170407-v1/76513c80c820fb182912051c9f97340748aa25c05ed42c622be533c3667137ad.jpg)

Figure 1-7: Front Panel

I/O connectors and controls on the MVP-5000 front panel, as labeled, are as follows

▶ Power Button
▶ LED Indicators
▶ Audio (Mic, Phones)
▶ Reset Button
▶ DisplayPort x2
▶ Digital Input
▶ Digital Output
▶ DVI-D
▶ VGA
▶ USB 2.0 (Type A) x2
▶ Gigabit Ethernet x3
▶ USB3.0 (Type A) x4
▶ DC power supply
▶ COM port x4

# 1.5.1 Power Button

The power button is a non-latched push button with a blue LED indicator. System is turned on when the button is depressed, and the power LED lights. If the system hangs, depress the button for 5 seconds to turn off the system completely.

# 1.5.2 LED Indicators

In addition to the LED of the power button, three LEDs on the front panel indicate the following.

<table><tr><td>LED indicator</td><td>Color</td><td>Description</td></tr><tr><td>Watchdog (WD)</td><td>Yellow</td><td>Indicates watchdog timer status. When watchdog timer starts, the LED flashes. When the timer is expired, the LED remains lit..</td></tr><tr><td>Hard disk drive (HD)</td><td>Orange</td><td>Indicates the HDD operating state. When the SATA hard drive or CFast card is active, the LED indicator flashes.</td></tr><tr><td>Diagnostic (DG)</td><td>Green</td><td>When lit continuously, indicates no physical storage is connected, and if blinking, indicates no memory is installed on either SODIMM socket.</td></tr></table>

Table 1-1: LED Indicators

# 1.5.3 Reset Button

The reset button executes a hard reset for the MVP-5000.

# 1.5.4 DisplayPort Connectors

Two DisplayPort connectors on the front panel can connect to VGA, DVI, HDMI (via adapter cable) and DisplayPort monitors.

![19\n1\n20\n2](.mvp-5000-series-manual-en-20170407-v1/12e944dde8e4969fecaeb1cccde9bfa1bf7180d0910323f0f9f1f6382ac7155f.jpg)

Figure 1-8: DisplayPort Connector

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>CN_DDPx0+</td><td>11</td><td>GND</td></tr><tr><td>2</td><td>GND</td><td>12</td><td>CN_DDPx3-</td></tr><tr><td>3</td><td>CN_DDPx0-</td><td>13</td><td>CN_DDPx_AUX_SEL</td></tr><tr><td>4</td><td>CN_DDPx1+</td><td>14</td><td>CN_DDPx_CONFIG2</td></tr><tr><td>5</td><td>GND</td><td>15</td><td>CN_DDPx_AUX+</td></tr><tr><td>6</td><td>CN_DDPx1-</td><td>16</td><td>GND</td></tr><tr><td>7</td><td>CN_DDPx2+</td><td>17</td><td>CN_DDPx_AUX-</td></tr><tr><td>8</td><td>GND</td><td>18</td><td>CN_DDPx_HPD</td></tr><tr><td>9</td><td>CN_DDPx2-</td><td>19</td><td>GND</td></tr><tr><td>10</td><td>CN_DDPx3+</td><td>20</td><td>+V3.3_DDPx_PWR_CN</td></tr></table>

Table 1-2: DisplayPort Pin Assignments

<table><tr><td>P/N</td><td>Description</td></tr><tr><td>30-01119-0010</td><td>Active DisplayPort to HDMI adapter cable</td></tr><tr><td>30-01120-0010</td><td>Active DisplayPort to DVI adapter cable</td></tr><tr><td>30-01121-0010</td><td>Active DisplayPort to VGA adapter cable</td></tr></table>

Table 1-3: Applicable Cable Types

# Display Options

With computing and graphic performance enhancement from its 6th Generation Intel processor, the MVP-5000 controller can support two independent displays, with configuration as follows.

<table><tr><td>Display Option 1</td><td>Display Option 2</td></tr><tr><td>DisplayPort14096x2304@60Hz</td><td>DisplayPort24096x2304@60Hz</td></tr><tr><td>DisplayPort14096x2304@60Hz</td><td>DVI-D1920X1080@60Hz</td></tr><tr><td>DisplayPort14096x2304@60Hz</td><td>VGA1920x1080@60Hz</td></tr></table>

<table><tr><td>Display Option 1</td><td>Display Option 2</td></tr><tr><td>DisplayPort24096x2304@60Hz</td><td>DVI-D1920X1080@60Hz</td></tr><tr><td>DisplayPort24096x2304@60Hz</td><td>VGA1920x1080@60Hz</td></tr><tr><td>DVI-D1920X1080@60Hz</td><td>VGA1920x1080@60Hz</td></tr></table>

Table 1-4: Maximum Available Resolutions with 2-Display Configuration

# 1.5.5 Digital I/O Connector

The MVP-5000 provides 8 channels of non-isolation digital input and 8 channels of non-isolation digital output circuits, with spec and circuits as follows.

# 8-channel Digital Input

▶ VIH: 2 to 5.25V
▶ VIL: 0 to 0.8V

# 8-channel Digital Output

▶ Output type: Open drain N-channel
▶ MOSFET driver with internal pull high of 200Ω resistance.
▶ Source/Sink current for all channels: 24mA
▶ VOH: 2.4 to 5V
▶ VOL: 0 to 0.5V

![5\n1\n9\n6](.mvp-5000-series-manual-en-20170407-v1/cfe445e000bb83a4ce99d102f4e6009d69fe28495f2e6b233e6fd25c49808664.jpg)

Figure 1-9: Digital I/O Connector Pin Assignment

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>DI0</td></tr><tr><td>2</td><td>DI1</td></tr><tr><td>3</td><td>DI2</td></tr><tr><td>4</td><td>DI3</td></tr><tr><td>5</td><td>DI4</td></tr><tr><td>6</td><td>DI5</td></tr><tr><td>7</td><td>DI6</td></tr><tr><td>8</td><td>DI7</td></tr><tr><td>9</td><td>DI_GND</td></tr></table>

Table 1-5: Digital Input Connector Pin Legend

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>DO0</td></tr><tr><td>2</td><td>DO1</td></tr><tr><td>3</td><td>DO2</td></tr><tr><td>4</td><td>DO3</td></tr><tr><td>5</td><td>DO4</td></tr></table>

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>6</td><td>DO5</td></tr><tr><td>7</td><td>DO6</td></tr><tr><td>8</td><td>DO7</td></tr><tr><td>9</td><td>DO_GND</td></tr></table>

Table 1-6: Digital Output Connector Pin Legend

![+3.3V\n2.2kΩ\nDI_IN\nDIn\n100kΩ\nG\nS\nMOS\nDI_GND](.mvp-5000-series-manual-en-20170407-v1/4b2df7422969396978cb9f56bdb9b62f02855e44e12a88fd9771d32de2c7f88c.jpg)

Figure 1-10: Digital Input Circuit

![+3.3V\n+5.0V\n2.2kΩ\n200Ω\nDO_OUT\nD\nG\nS\nMOS\nDOn](.mvp-5000-series-manual-en-20170407-v1/baa7fde70a6f3ced0c54485be2c8c9509427a80a26396ee9ad725aaa8a14e5ea.jpg)

Figure 1-11: Digital Output Circuit

# 1.5.6 DVI-D Connector

The MVP-5000 provides one DVI-D connector for connection to an external monitor.

![1 2 3 4 5 6 7 8\n9 10 11 12 13 14 15 16\n17 18 19 20 21 22 23 24\nC5](.mvp-5000-series-manual-en-20170407-v1/0fda928ef43109a85214e15d06aec3ee768c9bb15949c1bcfe1350f0da89338b.jpg)

Figure 1-12: DVI-D Connector Pin Assignment

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>DVldata 2-</td><td>9</td><td>DVldata 1-</td><td>17</td><td>DVldata 0-</td></tr><tr><td>2</td><td>DVldata 2+</td><td>10</td><td>DVldata 1+</td><td>18</td><td>DVldata 0+</td></tr><tr><td>3</td><td>GND</td><td>11</td><td>GND</td><td>19</td><td>GND</td></tr><tr><td>4</td><td>N/C</td><td>12</td><td>N/C</td><td>20</td><td>N/C</td></tr><tr><td>5</td><td>N/C</td><td>13</td><td>N/C</td><td>21</td><td>N/C</td></tr><tr><td>6</td><td>DVIDC clock</td><td>14</td><td>+5V</td><td>22</td><td>GND</td></tr><tr><td>7</td><td>DVIDC data</td><td>15</td><td>GND</td><td>23</td><td>DVI clock +</td></tr><tr><td>8</td><td>N/C</td><td>16</td><td>Hot plug detect</td><td>24</td><td>DVI clock -</td></tr></table>

Table 1-7: DVI-D Connector Pin Legend

# 1.5.7 VGA Connector

![Front view of a 16-pin D-sub connector (no text or symbols)](.mvp-5000-series-manual-en-20170407-v1/15e99980b2812c21b01e2dc6d3d3638c5734db6bf221b35447d91cca566473b0.jpg)

Figure 1-13: VGA Connector Pin Assignment

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>G_VGA_R</td></tr><tr><td>2</td><td>G_VGA_G</td></tr><tr><td>3</td><td>G_VGA_B</td></tr><tr><td>4</td><td>N/C</td></tr><tr><td>5</td><td>GND</td></tr><tr><td>6</td><td>GND</td></tr><tr><td>7</td><td>GND</td></tr><tr><td>8</td><td>GND</td></tr><tr><td>9</td><td>N/C</td></tr><tr><td>10</td><td>GND</td></tr><tr><td>11</td><td>N/C</td></tr><tr><td>12</td><td>CRT_DDAT_CN</td></tr><tr><td>13</td><td>G_VGA_HSYNC</td></tr><tr><td>14</td><td>G_VGA_VSYNC</td></tr><tr><td>15</td><td>CRT_DCLK_CN</td></tr></table>

Table 1-8: VGA Connector Pin Legend

# 1.5.8 USB 2.0 Ports

The MVP-5000 provides two USB 2.0 ports supporting Type A USB connection on the front panel. All USB ports are compatible with high-speed, full-speed and low-speed USB devices. The MVP-5000 supports multiple boot devices, including USB flash drive, USB external hard drive, USB floppy, USB CD-ROM and others. The boot priority and boot device can be configured in BIOS. Please refer to Section B.4: Boot on page 57 for details.

# 1.5.9 Gigabit Ethernet Ports

Three Gigabit Ethernet ports on the front panel support Intel WGI211AT Gigabit Ethernet PHY control.

WGI211AT provides:

▶ IEEE 802.3az Energy Efficient Ethernet

▶ IEEE 1588/802.1AS precision time synchronization
▶ IEEE 802.3Qav traffic shaper
▶ Interrupt moderation, VLAN support, IP checksum offload
▶ RSS and MSI-X to lower CPU utilization in multi-core systems
▶ ECC - error correcting memory in packet buffers
▶ Wake-On-LAN
▶ Preboot eXecution Environment (PXE) flash interface
▶ Jumbo frame support

![Close-up of a network connector with two ports and a symbol indicating a group (no text or labels visible)](.mvp-5000-series-manual-en-20170407-v1/8cf58c14dfd90f3afd5f2d73c46aedba3fb19f97c03c372fd28c95cfbe3b051d.jpg)

<table><tr><td>Active/LinkYellow</td><td>Speed LEDGreen/Orange</td></tr></table>

Figure 1-14: Ethernet Port and LED Legend

<table><tr><td>LED Color</td><td>Status</td><td>Description</td></tr><tr><td rowspan="3">Yellow</td><td>OFF</td><td>Ethernet port is disconnected.</td></tr><tr><td>ON</td><td>Ethernet port is connected with no activity.</td></tr><tr><td>Flashing</td><td>Ethernet port is connected and active.</td></tr></table>

Table 1-9: Active/Link LED Indicators

<table><tr><td>LED Color</td><td>Status</td><td>Description</td></tr><tr><td rowspan="3">Green/Orange</td><td>OFF</td><td>10 Mbps</td></tr><tr><td>Green</td><td>100 Mbps</td></tr><tr><td>Orange</td><td>1000 Mbps</td></tr></table>

Table 1-10: Speed LED Indicators

# 1.5.10 USB 3.0 Ports

The MVP-5000 provides four USB 3.0 ports supporting Type A USB3.0 connection on the front panel. All USB3.0 ports are compatible with super-speed, high-speed, full-speed and low-speed USB devices.

# 1.5.11 DC Power Connector

The DC power supply connector of the MVP-5000 is on the front panel. The power supply connector consists of three pins, V+, chassis ground, and V- from right to left respectively. V+ and V-pins provide DC power input and the chassis ground pin allows connection of the chassis to ground for better EMC compatibility. The DC power input for the MVP-5000 allows a voltage input range from 12VDC to 24VDC.

![The image displays a warning sign consisting of a dark red equilateral triangle containing a white exclamation point in the center. Directly below the triangle is the text 'WARNING:' printed in black, bold, uppercase letters.](.mvp-5000-series-manual-en-20170407-v1/3fa03205239968269e40694e03bcb9639ef82a16009cdb3eef98889663b8b43e.jpg)

Ensure that the DC power supply:

▶ is within the input voltage range defined in the specification
▶ is stable and low-noise DC
▶ provides sufficient operating current

DC power supply over or under voltage, unstable, or of insufficient power may cause system instability and physical damage

![12V ~ 24V DC IN\nV- GND V+](.mvp-5000-series-manual-en-20170407-v1/4a3fa8a26c1f7d4c6ab8dc208f159508789636fcba446c4816fbb429c33daa15.jpg)

Figure 1-15: DC Power Connector

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>V+ (DC_IN)</td></tr><tr><td>2</td><td>GND (CHGND)</td></tr><tr><td>3</td><td>V- (DGND)</td></tr></table>

Table 1-11: DC Power Supply Connector Signals

# 1.5.12 COM Port Connectors

The MVP-5000 provides four COM ports through D-sub 9 pin connectors. The COM1 & COM2 ports support RS-232/422/485 modes by BIOS setting, while COM3 and COM4 support only RS-232.

![1\n5\n6\n9](.mvp-5000-series-manual-en-20170407-v1/be99737a025387c170867a32887254860028b8def76bd15e3498bfb6f7aa7ff1.jpg)

Figure 1-16: COM Port

<table><tr><td rowspan="2">Pin</td><td colspan="3">Signal Name</td></tr><tr><td>RS-232</td><td>RS-422</td><td>RS-485</td></tr><tr><td>1</td><td>DCD#</td><td>TXD422-</td><td>485DATA-</td></tr><tr><td>2</td><td>RXD</td><td>TXD422+</td><td>485DATA+</td></tr><tr><td>3</td><td>TXD</td><td>RXD422+</td><td>N/S</td></tr><tr><td>4</td><td>DTR#</td><td>RXD422-</td><td>N/S</td></tr><tr><td>5</td><td>GND</td><td>N/S</td><td>N/S</td></tr><tr><td>6</td><td>DSR#</td><td>N/S</td><td>N/S</td></tr><tr><td>7</td><td>RTS#</td><td>N/S</td><td>N/S</td></tr><tr><td>8</td><td>CTS#</td><td>N/S</td><td>N/S</td></tr><tr><td>9</td><td>RI#</td><td>N/S</td><td>N/S</td></tr></table>

Table 1-12: D-Sub 9p Signal Function of COM Ports

# 1.6 Rear-Mounted CFast Host Connector

The MVP-5000 is equipped with a Type II Push Push CFlash host connector on the rear panel, by SATA interface. Data transfer rates up to 3.0Gb/s(300MB/s)/1.5Gb/s(150MB/s) are supported. The host SATA controller provides a legacy operating mode using

I/O space, and an AHCI operating mode using memory space. The CFast card can function as a storage device for system installation.

![CFast](.mvp-5000-series-manual-en-20170407-v1/27012eccd69df06b9320e6bd7ae0c08411e222657581a3e3095478148686eb92.jpg)

Figure 1-17: CFast Host Connector (on rear panel)

# 1.7 Internal I/O Connectors

![A\nB C D E\nI\nDEV-0016351\nF\nG\nH](.mvp-5000-series-manual-en-20170407-v1/a903b882964dc279736337d062401ce3d9808d30e754b37ea6384dfe40211af2.jpg)

Figure 1-18: Mainboard I/O Connectors

<table><tr><td>A</td><td>5V GPS module power header</td></tr><tr><td>B</td><td>3.3V GPS module power header</td></tr><tr><td>C</td><td>USB2.0 connector</td></tr><tr><td>D</td><td>Mini PCIe socket</td></tr><tr><td>E</td><td>SATA connector</td></tr><tr><td>F</td><td>9V fan connector</td></tr><tr><td>G</td><td>Jumpers:►Clear CMOS (upper)►N/C (lower)</td></tr><tr><td>H</td><td>Extended PWR/RESET header</td></tr><tr><td>I</td><td>USIM slot</td></tr></table>

Table 1-13: Mainboard Connector Legend

![B\nA\nC](.mvp-5000-series-manual-en-20170407-v1/74f4d1f4970b12fbfa5595e2d2f3548570252a3ca5798621b148b861ccb2714f.jpg)

Figure 1-19: CFast Board Connectors

<table><tr><td>A</td><td>CFast socket</td></tr><tr><td>B</td><td>12V fan (optional)</td></tr><tr><td>C</td><td>PCIe slot (connects to mainboard)</td></tr></table>

Table 1-14: CFast Board Connector Legend

# 1.7.1 5V GPS Module Power Header

5V power supply via cable for mini PCIE GPS module cards.

![Pure electrical connector diagram without any text or symbols](.mvp-5000-series-manual-en-20170407-v1/385a7c00b2dd169e5d9f5eda8c605b12fdd1ec55d28906770b580b10deb354cf.jpg)

<table><tr><td>Pin</td><td></td></tr><tr><td>1</td><td>+V5_GPS</td></tr><tr><td>2</td><td>GND</td></tr></table>

# 1.7.2 3.3V GPS Module Power Headers

3.3V power supply via cable for mini PCIE GPS module cards.

![Pure electrical circuit lines without any symbols](.mvp-5000-series-manual-en-20170407-v1/91ced3d5ab231d3b14bf3999a8d573af0c7cef38a179702611daf51dc9836927.jpg)

<table><tr><td>Pin</td><td></td></tr><tr><td>1</td><td>+V3.3_GPS</td></tr><tr><td>2</td><td>GND</td></tr></table>

# 1.7.3 USB 2.0 Connector

One onboard USB 2.0 Type-A connector is provided for the internal USB dongle, with only the upper port functional.

# 1.7.4 Mini PCIe Socket

The internal Mini PCIe socket (Rev. 1.2) supports full size Mini PCIe cards.

# 1.7.5 SATA Connector

The SATA connector supports transfer up to 3.0GB/s(300MB/s).

# 1.7.6 9V Fan Connector

DC 9V fan module power supply is provided through the connector, to which the optional fan module connects when installed in the chassis.

![Close-up of a green electronic component with three metallic pins and a vertical slot, labeled with number 1 (no text or symbols on the component itself)](.mvp-5000-series-manual-en-20170407-v1/e2907fcbca8cc2b2b7e5c0edd45b964827c4c75a0b55f4d3de401cfdf0ac5078.jpg)

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>FAN_GND</td></tr><tr><td>2</td><td>P_+9V0_FAN1</td></tr><tr><td>3</td><td>FAN_TACH_CN</td></tr><tr><td>4</td><td>FAN_PWM_CN</td></tr></table>

# 1.7.7 Clear CMOS Jumper

Upon encountering an abnormal condition preventing the MVP-5000 from booting, the jumper can clear the BIOS content stored in CMOS and restore default settings. To clear CMOS, short pin #2 to pin #3 for a minimum of 3 seconds, and then remove the jumper to return to normal mode.

![The image displays a digital clock interface featuring three square digits arranged horizontally against a black background. The first two boxes have white backgrounds containing the black numbers '1' and '2', while the third box has a grey background containing the black number '3'.](.mvp-5000-series-manual-en-20170407-v1/e93654d21db68fcc01a1cd48df6f1e2ddfde37794c4949841a296b38053f6ac8.jpg)
Figure 1-20: Clear CMOS Jumper Setting

# 1.7.8 Extended PWR/RESET header

An internal header is provided for the Power and Reset buttons, with pin assignment as shown.

![1\nCN30](.mvp-5000-series-manual-en-20170407-v1/e72ac7463c65086c459a99a1ee84b3d9633930eef2bf67115813dbb9582025a7.jpg)

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>PWR_BTN-L</td></tr><tr><td>2</td><td>GND</td></tr><tr><td>3</td><td>GND</td></tr><tr><td>4</td><td>RESET_BTN-L</td></tr></table>

# 1.7.9 USIM Slot

The USIM slot connects to the Mini PCIe slot.

This page intentionally left blank.

# 2 Getting Started

# 2.1 Unpacking Checklist

Before unpacking, check the shipping carton for any damage. If the shipping carton and/or contents are damaged, inform your dealer immediately. Retain the shipping carton and packing materials for inspection. Obtain authorization from your dealer before returning any product to ADLINK. Ensure that the following items are included in the package.

▶ MVP-5000 controller
▶ Accessory pack
▶ Screw pack for wall-mounting and HDD installation
▶ Quick Start Guide

# 2.2 Installing Hard Disk Drives

1. Remove the 11 bottom cover screws by screwdriver

![Close-up of a black heat sink with cooling fins and mounting holes, marked with red circles (no text or symbols visible)](.mvp-5000-series-manual-en-20170407-v1/f64612d7dfe2da4b59ffbb3c0b99e0d83c56afa99159805c9490b1ded03e8899.jpg)

![Close-up of a black heat sink with cooling fins and connectors, showing two red-circled points of interest (no text or symbols visible)](.mvp-5000-series-manual-en-20170407-v1/b00d481f56030ec77c39a970bc1de2b36868569575a1c1ac5c7d29ecfac17cfd.jpg)

# 2. Remove the bottom cover by lifting.

![12V - 24V DC IN\nADLINK\nCOM1\nCOM2\n12V - 24V DC IN](.mvp-5000-series-manual-en-20170407-v1/a3a5e7a812d57e64e03aaaf758d533bb68797ba75748f9273a8b277039ff9cf4.jpg)

# 3. Use 4 of the included M3 screws to fix a 2.5" HDD or SSD unit to the bracket from the accessory pack..

![2.5' SATA SSD\n3MG2-P\nSeries\nIndustrial\ninmodisk](.mvp-5000-series-manual-en-20170407-v1/f1447156062c45baf6219a0fb0ddd90e98f8f64d60fe2309eabb088a81a33f88.jpg)

4. Gently seat the drive into the SATA connector on the PCB.

![3MG2-P\nSATA SSD\nIn005k](.mvp-5000-series-manual-en-20170407-v1/a6849db5675e2086ee1355458e21bfec3e59302bae51c76dc8fffde6b288dd6b.jpg)

5. Use 4 of the included M3 screws to mount the drive..

![2.5' SATA SSD\n3MG2-P\nSeries\ninmodisk](.mvp-5000-series-manual-en-20170407-v1/d2a7d61ad9fc6c4e87810ccd6c4b428cedd3c61eec8df6b6230b3b5b282564b0.jpg)

6. Replace the bottom cover and refasten screws.

# 2.3 Installing CFast Cards

1. Remove the screws fixing the CFast socket cover on the rear panel and remove the cover.

![MVP-5000\nPactiva Embedded Computer\nADLINK\nTECHNOLOGY INC.\nTesto Rating\nRating: 12.34V / 11.3A-6.25A\n38.34V / 5.25A\nCE\nFE\nFactory 09-09\n中国制造\nMade in China\nCFast](.mvp-5000-series-manual-en-20170407-v1/31b8c4e10db8bb7a14eae3633600299287a5769e82cf4dd3d852dc1b99281fcd.jpg)

2. True the CFast card with the alignment guide.

![MVP-5000\nFurniture Embedded Computer\nADLINK\nTECHNOLOGY INC.\nStandard Rating\n10.000 GB\n10.000 GB/10.2.5A-6.25A\n48.000 GB/10.2.5A\nCE PC\nFactory ID: 97\nMade in China\nCFast\nCFast 3ME3\nHPL: DBCPA-6.25A/10.2.5A ASG\n8GB\nMade in China\nRoHS](.mvp-5000-series-manual-en-20170407-v1/151bf5f0101201220e8a9803bb0a08508a1a153e3781da811e9471eb290aa9da.jpg)

3. Gently insert the CFast card until it is firmly seated in the socket.

![MVP-5000\nFasterless Embedded Computer\nADLINK\nWireless Ethernet Drive\nInput Rating\n型号:1.324V @ 12.6A-8.25A,\nor 24V @ 1.25A\nCE\nFactory ID: BVI\n中国制造\nMade in China\nCFast](.mvp-5000-series-manual-en-20170407-v1/deee9fb48dfd58e707c2a573efeb273039f9fda95a88e10aa0d36dec58f0d0df.jpg)

4. Replace the socket cover and screws.

# 2.4 Wall-mounting the MVP-5000

![The image displays a white document icon with a folded top-right corner and faint horizontal lines representing text. A large, bold red checkmark is superimposed over the center of the document.](.mvp-5000-series-manual-en-20170407-v1/e3e85af9578e3414e88bfbbfbe8b5e8b3fbc25fbe323802be62b82cc99298f9c.jpg)
NOTE:

All dimensions shown are in mm (millimeters).

![The image features a standard warning sign, depicted as a yellow triangle with a thick black border. Centered inside the triangle is a large black exclamation point.](.mvp-5000-series-manual-en-20170407-v1/48c9dff50f55eed0ee6718727422794dcc452462db33976c204a89290634a1d3.jpg)
CAUTION:

Due to the presence of ventilation holes, for safety, the device should ONLY be wall-mounted with the front and rear panels on the sides, NEVER on the top or underside.

The MVP-5000 ships with wall-mount brackets and accessory screws. To wall-mount the MVP-5000:

1. Remove the 4 plastic pads and 2 screws from the underside.

![Technical diagram of an industrial electronic device with labeled ports and red circles highlighting specific components.](.mvp-5000-series-manual-en-20170407-v1/e2a3687272530abc2acaca9d1452e9e2909f19902798f4d88f3352866dc072d3.jpg)

2. Use the 6 M4 screws shipped with the controller to fix the 2 wall-mount brackets, also included, to the chassis, according to the spacing dimensions of the screw holes and brackets, as shown.

![3D rendering of a black industrial electronic device with multiple ports and mounting brackets, showing internal wiring and mounting hardware (no text or symbols visible)](.mvp-5000-series-manual-en-20170407-v1/f398c9f172273e3042fe20690c506e30b260f6af04a9d95de9e847d4ffe84354.jpg)

![(R2.6)\n120 180 210\n243\n258](.mvp-5000-series-manual-en-20170407-v1/b52c5f9653fd1702efef6daf977131c4e43f557761d4f9f9670a31023ea4d552.jpg)

3. Once final assembly as shown is complete, mount the MVP-5000 on the wall via screw holes.

# 2.5 Driver Installation

Download requisite drivers, as follows, for your system from http://www.adlinktech.com and install.

The following drivers must be installed:

▶ Chipset driver
▶ Graphics driver
▶ Ethernet driver
▶ Audio driver
▶ USB 3.0 driver
▶ Intel Management Engine driver
▶ Serial I/O driver

# 2.6 Adapter

The MVP-5000 with verified adapter meets the following specifications.

<table><tr><td>Output Rating</td><td>12-24VDC/12.5-6.25A or 24VDC/6.25A min.</td></tr><tr><td>Operating Elevation</td><td>2000m max.</td></tr><tr><td>Operating Temperature</td><td>0-50°C (32-122°F)</td></tr><tr><td>UL</td><td>Listed certified</td></tr></table>

# Appendix A Power Consumption

![The image displays a white document icon with a folded upper-right corner. Faint grey horizontal lines run across the paper to simulate text. A large, bold red checkmark is superimposed over the center of the document.](.mvp-5000-series-manual-en-20170407-v1/9c5daf5fd4490b9b21a31b8dea747cd2d8d1b0e2eda6a91c74423f6a747f5f2a.jpg)
NOTE:

Information in this Appendix is for power budget planning and design purposes only. Actual power consumption may differ based on final application.

# A.1 Power Consumption Reference

Power consumption as follows is based on lab data in which 24V DC is applied and current is measured by the DC power supply. The power consumption (W) is calculated as the product of applied voltage (V) and the current (A).

Platforms tested for this data have available external I/O interfaces, and are attached to supported devices such as VGA and DVI monitors, CFast card, Ethernet, USB, COM, and audio loopback, and an internal SSD installed.

No MiniPCIe slots are occupied.

Information is presented for reference only. Actual power consumption will vary with different attached devices and platform operations.

<table><tr><td>Power Supply: 24VDC</td><td>Power Off</td><td>System Idle</td><td>System Full Load</td><td>Recommended Power Supply</td></tr><tr><td colspan="5">Integrated Embedded Computer</td></tr><tr><td>MVP-5000 i7</td><td>2.9 W</td><td>19.68 W</td><td>53.52 W</td><td>160W</td></tr><tr><td>MVP-5000 i5</td><td>2.9 W</td><td>18.26 W</td><td>52.18W</td><td>160W</td></tr><tr><td>MVP-5000 i3</td><td>2.9 W</td><td>17.9 W</td><td>50.66 W</td><td>160W</td></tr></table>

Table A-1: Power Consumption

![An icon depicting a white document with a folded top-left corner and horizontal gray lines representing text, overlaid with a large red checkmark.](.mvp-5000-series-manual-en-20170407-v1/fa1d5c54f32bbe1ffebbb6374f8bd0c946a8393afb72269b3d6b3121b789944f.jpg)
NOTE:

Sufficient power supply for the entire system is required to meet these specifications. At least 100W at 24V input is recommended.

This page intentionally left blank.

# Appendix B BIOS Setup

The Basic Input/Output System (BIOS) is a program that provides a basic level of communication between the processor and peripherals. In addition, the BIOS also contains codes for various advanced features applied to the MVP-5000. The BIOS setup program includes menus for configuring settings and enabling features of the MVP-5000. Most users do not need to use the BIOS setup program, as the MVP-5000 ships with default settings that work well for most configurations.

Enter BIOS setup by selecting DEL when the system is powered on the POST (Power On Self Test) message is displayed. The MVP-5000 controller supports one-time Boot Menu allowing selection of boot device. Enter the Boot Menu by selecting F7 at POST.

![The image displays a white document icon with a folded upper-right corner and horizontal lines, overlaid with a large, bold red checkmark.](.mvp-5000-series-manual-en-20170407-v1/c6836054d2762aaf03c3ff2893feafdbeaf3476bd67f3c7eef93fb165ddea67c.jpg)
NOTE:

▶ BIOS options listed are for reference only.
▶ Different configurations can affect BIOS behavior.
▶ Displayed material may reflect only the BIOS version corresponding to initial release and may differ from that of the purchased motherboard.
▶ Users are welcome to download the latest BIOS version from our official website.

# B.1 Main

Contains basic system information for the MVP-5000.

![A red triangular warning sign with rounded corners containing a white exclamation point.](.mvp-5000-series-manual-en-20170407-v1/34aab15e95ac37c0ec307c729119b7c43a28dc81892d0c65f9ee7ce3e4de74ef.jpg)
WARNING:

Changing BIOS settings may lead to incorrect controller behavior and possible inability to boot. In such a case, Section 1.7.7: Clear CMOS Jumper provides instruction on clearing the CMOS and restoring default settings

![Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.\nMain\nBIOS Information\nBIOS Vendor\nCore Version\nBIOS Version\nBoard Version\nProduct Name\nPlatform Information\nName\nStepping\nName\nPCH SKU\nStepping\nGT Info\nF/W Information\nMemory RC Version\nMicrocode Patch\nIGFX VBIOS Version\nME FW Version\nSystem Date\nSystem Time\nAccess Level\nAmerican Megatrends\n5.11\nAVBK-6000 1.04.10\nA02\nMVP-5000\nSkyLake DT\nRO/SO/NO\nSKL PCH-H\nPCH-H Desktop H110 SKU\n31/D1\nGT2 (1000 MHz)\n1.8.0.1\nB2\n1033\n11.0.0.1202\n(Tue 11/29/2016)\n(00:16:15)\nAdministrator\nSet the Date. Use Tab to switch between Date elements.\n+: Select Screen\nT1: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit](.mvp-5000-series-manual-en-20170407-v1/014760902eac1dc2c47b2a4a1f926800f425418fed81ebf743b18d2ba224963a.jpg)

# BIOS Information

Shows current system BIOS Vendor, Core Version, BIOS Version, Board Version and Product Name.

# Platform Information

Shows current system Platform Name, CPU Stepping, PCH SKU, PCH Stepping and GT information.

# FW Information

Shows current system Memory RC version, Microcode Path, IGFX VBIOS version and ME FW version.

# System Time/System Date

Allows adjustment of system time and date, as follows.

1. Highlight System Time or System Date using the up and down &lt;Arrow&gt; keys
2. Enter new values using the keyboard and select &lt;Enter&gt;
3. Select &lt; Tab &gt; to move between fields.

![The image is an icon depicting a white sheet of paper with a folded top-left corner and faint horizontal black lines running across it. A large, thick red checkmark is drawn diagonally over the paper, extending from the lower left to the upper right.](.mvp-5000-series-manual-en-20170407-v1/e702daabf094f670b8a343120ee4736f439f025385ac93d0ced12ed84a9b26b9.jpg)
NOTE:

The date must be entered in MM/DD/YY format, and the time in HH:MM:SS.
The time is in 24-hour format. For example, 5:30 A.M. appears as 05:30:00, and 5:30 P.M. as 17:30:00.

# B.2 Advanced

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.</td></tr><tr><td colspan="2">Main Advanced Security Boot Save &amp; Exit</td></tr><tr><td>CPU Configuration
Memory Configuration
System Agent (SA) Configuration
Onboard Devices Configuration
Advanced Power Management
USB Configuration
SATA Configuration
CSM Configuration
Network Stack Configuration
NCT6106D HW Monitor</td><td>CPU Configuration Parame</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

![The image displays a yellow triangular warning sign with a black border containing a black exclamation point. Below the triangle, the word 'CAUTION:' is printed in black capital letters.](.mvp-5000-series-manual-en-20170407-v1/39db20ea9c19ff993cd5bad2b820740b0975ee95f5fee0f42c79517a3039f4a4.jpg)

Setting incorrect or conflicting values in Advanced BIOS Setup may cause system malfunction

Accesses advanced options of the MVP-5000.

# B.2.1 CPU Configuration

Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.

Advanced

CPU Configuration

Intel(R) Core(TM) i7-6700TE CPU @ 2.40GHz

CPU Signature 506E3

Microcode Patch 55

Max CPU Speed 2400 MHz

Min CPU Speed 800 MHz

CPU Speed 2400 MHz

Processor Cores 4

Hyper Threading Technology Supported

Intel VT-x Technology Supported

Intel SMX Technology Supported

64-bit Supported

EIST Technology Supported

CPU C3 state Supported

CPU C6 state Supported

CPU C7 state Supported

L1 Data Cache 32 kB x 4

L1 Code Cache 32 kB x 4

L2 Cache 256 kB x 4

L3 Cache 8 MB

L4 Cache Not Present

Hyper-threading

[Enabled]

Enabled for Windows XP and

Linux (OS optimized for Hyper-Threading Technology)

and Disabled for other OS (OS not optimized for

Hyper-Threading Technology).

When Disabled only one thread per enabled core is enabled.

++: Select Screen

↑↓: Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC: Exit

Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.

Advanced

CPU Speed

Processor Cores

Hyper Threading Technology

Intel VT-x Technology

Intel SMX Technology

64-bit

EIST Technology

CPU C3 state

CPU C6 state

CPU C7 state

L1 Data Cache

L1 Code Cache

L2 Cache

L3 Cache

L4 Cache

2400 MHz

4

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

32 kB × 4

32 kB × 4

256 kB × 4

8 MB

Not Present

Hyper-threading

Active Processor Cores

Intel Virtualization Technology

CPU AES

Intel(R) SpeedStep(tm)

CPU C states

Intel TXT(LT) Support

TCC Activation Offset

[Enabled]

[All]

[Enabled]

[Enabled]

[Disabled]

[Disabled]

[Disabled]

0

Offset from the factory TCC

activation temperature

++: Select Screen

↑↓: Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC: Exit

Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.

# Hyper-Threading

Enabled for Windows 7, 10 IoT Enterprise, and Linux (optimized for Hyper-Threading Technology). When Disabled only one thread per enabled core is enabled.

# Active Processor Cores

Number of cores to enable in each processor package.

# Intel Virtualization Technology

When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology.

# CPU AES

Enable/Disable CPU Advanced Encryption Standard instructions.

# Intel(R) SpeedStep(tm)

Allows more than two frequency ranges to be supported.

# CPU C States

Enable or disable CPU C states.

# Intel TXT(LT) Support

Enables or Disables Intel(R) TXT(LT) support.

# TCC Activation Offset

Offset from the factory TCC activation temperature.

# B.2.2 Memory Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc. Advanced</td></tr><tr><td>Memory Configuration</td><td rowspan="2"></td></tr><tr><td>Memory RC Version 1.8.0.1 Memory Frequency 2133 MHz Total Memory 16384 MB DIMM#0 8192 MB DIMM#1 8192 MB</td></tr><tr><td></td><td>+: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

Shows current system Memory RC Version and values for memory frequency, total memory, DIMM#0, and DIMM#1.

# B.2.3 System Agent (SA) Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc. Advanced</td></tr><tr><td>System Agent Bridge Name Skylake
SA PCIe Code Version 1.8.0.0
VT-d Supported
VT-d [Enabled]
▶ Graphics Configuration</td><td>VT-d capability</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

# VT-d

Enables/disables VT-d capability.

# B.2.4 Graphics Configuration

![Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.\nAdvanced\nGraphics Configuration\nGTT Size	(8MB)\nAperture Size	(256MB)\nDVMT Pre-Allocated	(32M)\nDVMT Total Gfx Mem	(256M)\nSelect the GTT Size\n+: Select Screen\nF1: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit](.mvp-5000-series-manual-en-20170407-v1/595e3fd33de943966d35e443f07024446f12465603a215e1baad78956c656107.jpg)

# GTT Size

Sets GTT size.

# Aperture Size

Sets aperture size, with MMIO BIOS assignment exceeding 4GB automatically enabled when 2048MB aperture is selected, available when CSM Support is disabled.

# DVMT Pre-Allocated

Sets size of DVMT 5.0 pre-allocated (fixed) graphics memory used by the internal graphics device.

# DVMT Total Gfx Mem

Sets size of DVMT5.0 total graphic memory used by the internal graphics device.

# B.2.5 Onboard Device Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Advanced</td></tr><tr><td>Onboard Devices Configuration
Serial Port Configuration
COM1 Device Settings IO=3F8h; IRQ=4;
COM1 Control [RS232]
COM2 Device Settings IO=2F8h; IRQ=3;
COM2 Control [RS232]
COM3 Device Settings (RS232) IO=3E8h; IRQ=5;
COM4 Device Settings (RS232) IO=2E8h; IRQ=7;
▶ Serial Port Console Redirection
Lan Port Configuration
LAN #1 (Intel I211AT) [Enabled]
LAN #1(I211AT) Launch PXE OpROM [Disabled]
LAN #2 (Intel I211AT) [Enabled]
LAN #2(I211AT) Launch PXE OpROM [Disabled]
LAN #3 (Intel I211AT) [Enabled]
LAN #3(I211AT) Launch PXE OpROM [Disabled]</td><td>Select COM1 mode. RS232, RS422 or RS485
+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

# Serial Port 1 to 4 Configuration

Sets port type (RS-232/422/485) for Serial Ports 1 and 2 only.

# LAN #1 (Intel I211AT)

Enables/Disables onboard Intel I211AT LAN controller.

# LAN #1(I211AT) Launch PXE OpROM

Enables or disables execution of LAN boot-rom to add boot option for legacy network devices.

# LAN #2 (Intel I211AT)

Enables/Disables onboard Intel I211AT LAN controller.

# LAN #2(I211AT) Launch PXE OpROM

Enables or disables execution of LAN boot-rom to add boot option for legacy network devices.

# LAN #3 (Intel I211AT)

Enables/Disables onboard Intel I211AT LAN controller.

# LAN #3(I211AT) Launch PXE OpROM

Enables or disables execution of LAN boot-rom to add boot option for legacy network devices.

# Serial Port Console Redirection

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc. Advanced</td></tr><tr><td>Serial Port Console Redirection COM1 Console Redirection [Disabled] Console Redirection Settings COM2 Console Redirection [Disabled] Console Redirection Settings COM3 Console Redirection [Disabled] Console Redirection Settings COM4 Console Redirection [Disabled] Console Redirection Settings Serial Port for Out-of-Band Management/ Windows Emergency Management Services (EMS) Console Redirection [Disabled] Console Redirection Settings</td><td>Console Redirection Enable or Disable. +: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

# Console Redirection

Enables console redirection on COM 1 to 4 and EMS COM.

# Console Redirection Settings

Sets miscellaneous parameters for COM Ports 1 to 4 and EMS COM.

# B.2.6 Advanced Power Management

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc. Advanced</td></tr><tr><td>Advanced Power Management
State After G3 [Last State]
RTC Wake system from S5 [Disabled]
BIOS POST Watchdog [Disabled]</td><td>Specify what state to go to when power is re-applied after a power failure (G3 state).</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

# State After G3

Determines the state the computer enters when power is restored after power loss, from among Last State, Power On, and Power Off

<table><tr><td>Option</td><td>Description</td></tr><tr><td>Power Off</td><td>Retains system power off after power is restored</td></tr><tr><td>Power On</td><td>Powers the system up when power is restored</td></tr><tr><td>Last State</td><td>When power is restored, returns the system to the state in which power was interrupted</td></tr></table>

# State After G3

Sets the state entered when power is re-applied after a power failure (G3 state).

# RTC Wake system from S5

Enable or disable system wake on alarm event, with FixedTime waking the system at the hr/min/sec specified, and DynamicTime waking the system at the current time + Increase minute(s).

# BIOS POST Watchdog

From among Disabled, Second Mode and Minute Mode.

# B.2.7 USB Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc. Advanced</td></tr><tr><td>USB Configuration Legacy USB Support [Enabled] XHCI Hand-off [Disabled] USB Mass Storage Driver Support [Enabled] Port 60/64 Emulation [Disabled] USB hardware delays and time-outs: USB transfer time-out [20 sec] Device reset time-out [20 sec] Device power-up delay [Auto]</td><td>Enables Legacy USB support. AUTO option disables legacy support if no USB devices are connected. DISABLE option will keep USB devices available only for EFI applications.</td></tr><tr><td></td><td>+: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

# Legacy USB Support

With AUTO disabling legacy support if no USB devices are connected, and DISABLE keeping USB devices available only for EFI applications.

# XHCI Hand-off

A workaround for OS without XHCI hand-off support, where XHCI ownership change should be claimed by the XHCI driver.

# USB Mass Storage Driver Support

Enable/Disable USB mass storage driver support.

# Port 60/64 Emulation

Enables I/O port 60h/64h emulation support, should be enabled for complete USB keyboard legacy support for OS not recognizing USB ports.

# USB transfer time-out

Timeout value for Control, Bulk, and Interrupt transfers.

# Device reset time-out

USB mass storage device Start Unit command timeout.

# Device power-up delay

Maximum time taken before the device reports itself to the Host Controller, with Auto using a default value of 100 ms for a Root port, and for Hub port the delay is taken from the Hub descriptor.

# B.2.8 SATA Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc. Advanced</td></tr><tr><td>SATA Configuration
SATA Port [Enabled]
CFast Card [Enabled]</td><td></td></tr><tr><td>SATA Port 2.5&quot; SATA SSD (64.0GB)
Software Preserve SUPPORTED
CFast Card Empty
Software Preserve Unknown</td><td></td></tr><tr><td></td><td>Enable or Disable SATA Port</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

# SATA Port and CFast Card

Enable or Disable SATA Port and CFast Card.

for Hub port the delay is taken from the Hub descriptor.

# B.2.9 CSM Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc. Advanced</td></tr><tr><td>Compatibility Support Module Configuration</td><td>Enable/Disable CSM Support.</td></tr><tr><td>CSM Support [Enabled]</td><td></td></tr><tr><td>CSM16 Module Version 07.79</td><td></td></tr><tr><td>GateA20 Active [Upon Request]</td><td></td></tr><tr><td>Option ROM Messages [Force BIOS]</td><td></td></tr><tr><td>Boot option filter [UEFI and Legacy]</td><td></td></tr><tr><td>Option ROM execution</td><td></td></tr><tr><td>Network [Legacy]</td><td rowspan="4">+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF2: Previous ValuesF3: Optimized DefaultsF4: Save &amp; ExitESC: Exit</td></tr><tr><td>Storage [Legacy]</td></tr><tr><td>Video [Legacy]</td></tr><tr><td>Other PCI devices [Legacy]</td></tr></table>

# CSM Support

Enable or Disable CSM Support.

# GateA20 Active

UPON REQUEST disables GA20 using BIOS services, and ALWAYS prevents GA20 from being disabled, useful when any RT code exceeding 1MB is executed.

# Option ROM Messages

Sets display mode for Option ROM.

# Boot option filter

Controls Legacy/UEFI ROM priority.

# Network

Controls execution of UEFI and Legacy PXE OpROM.

# Storage

Controls execution of UEFI and Legacy Storage OpROM.

# Video

Controls execution of UEFI and Legacy Video OpROM.

# Other PCI devices

Determines OpROM execution policy for devices other than Network, Storage, and Video.

# B.2.10 Network Stack Configuration

![Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.\nAdvanced\nNetwork Stack Configuration\nNetwork Stack (Disabled)\nEnable/Disable UEFI Network Stack\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit\nVersion 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.](.mvp-5000-series-manual-en-20170407-v1/33fa5769178b131fb7f80155c38a99feadcbf2572a8a9e1a570cea421e971e1a.jpg)

Enables/disables UEFI lpv4/lpv6 network stack function.

# B.2.11 PC Health Status

# (Opens from Advanced/NCT6106D HW Monitor)

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc. Advanced</td></tr><tr><td>Pc Health Status Board Temperature : +36 % CPU Temperature : +30 % Fan Speed : N/A Fan Control Mode [SMART FAN IV] T1 10 T1 Duty 16 T2 50 T2 Duty 80 T3 60 T3 Duty 90 T4 70 T4 Duty 240 Critical 80 +VCORE : +0.976 V +9V_S : +9.120 V +5V_S : +5.119 V +3.3V_S : +3.353 V +3.3V_SIO_AVSB : +3.344 V +3.3V_VBAT_SIO : +2.080 V</td><td>Fan Control Mode Select</td></tr><tr><td></td><td>+: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

Hardware monitor based on Super I/O shows Board Temperature, CPU Temperature, Fan Speed, Fan Control Mode, and Voltage values.

# B.3 Security

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.Main Advanced Security Boot Save &amp; Exit</td></tr><tr><td>Password DescriptionIf ONLY the Administrator&#x27;s password is set,then this only limits access to Setup and isonly asked for when entering Setup.If ONLY the User&#x27;s password is set, then thisis a power on password and must be entered toboot or enter Setup. In Setup the User willhave Administrator rights.The password length must bein the following range:Minimum length 3Maximum length 20Administrator PasswordUser PasswordRTC Lock [Enabled]BIOS Lock [Enabled]</td><td>Set Administrator Password+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF2: Previous ValuesF3: Optimized DefaultsF4: Save &amp; ExitESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

If only the Administrator password is set, access s limited and the password requested on Setup. If User password is set, it acts as a power-on password and must be entered to boot or enter setup. In Setup the user receives

# Administrator Password

Sets Administrator Password.

# User Password

Sets User Password.

# RTC Lock

Enable locks bytes 38h-3Fh in the lower/upper 128-byte bank of RTC RAM.

# BIOS Lock

Enable/Disable the PCH BIOS Lock (BLE bit).

# B.4 Boot

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Main Advanced Security Boot Save &amp; Exit</td></tr><tr><td>Boot Configuration
Setup Prompt Timeout 1
Bootup NumLock State [On]</td><td></td></tr><tr><td>Quiet Boot [Enabled]
Fast Boot [Disabled]</td><td></td></tr><tr><td>Boot Option Priorities
Boot Option #1 [P0: 2.5&quot; SATA SSD
3MG2-P ]</td><td></td></tr><tr><td>Boot Option #2 [UEFI:
JetFlashTranscend 16GB
8.07, Partition 1]</td><td></td></tr><tr><td>Hard Drive BBS Priorities</td><td></td></tr></table>

# Setup Prompt Timeout

Number of seconds before setup activation key is launched, with 65535(0xFFFF) setting indefinite waiting.

# Bootup Num-Lock State

Sets keypad Number Lock status following boot.

# Quiet Boot

<table><tr><td>Option</td><td>Description</td></tr><tr><td>Disabled</td><td>Directs BIOS to display POST messages</td></tr><tr><td>Enabled</td><td>Directs BIOS to display the OEM logo.</td></tr></table>

# Fast Boot

<table><tr><td>Option</td><td>Description</td></tr><tr><td>Disabled</td><td>Directs BIOS to perform all POST tests.</td></tr><tr><td>Enabled</td><td>Directs BIOS to skip certain POST tests to boot faster.</td></tr></table>

While enabling Fast Boot can reduce system ready time, some prerequisites can reduce effectiveness

# Boot Option Priorities

Specifies the priority of boot devices, all of which are detected during POST and displayed. Target Boot Option # and click to select the desired device

# Hard Drive BBS Priorities

![Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.\nBoot\nBoot Option #1 (P0: 2.5' SATA SSD\n3MG2-P )\nBoot Option #2 (JetFlashTranscend 16GB\n8.07)\nSets the system boot order\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit\nVersion 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.](.mvp-5000-series-manual-en-20170407-v1/89a8f777459292a4798c312c9185897262454db0af9a8a07305035713fdd6ce8.jpg)

Specifies the priority of boot devices. All installed boot devices are detected during POST and displayed. Target Boot Option # and click to select the desired device.

# B.5 Save & Exit

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.</td></tr><tr><td>Main Advanced Security Boot Save &amp; Exit</td><td></td></tr><tr><td rowspan="2">Discard Changes and Exit
Save Changes and Reset
Discard Changes
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
UEFI: JetFlashTranscend 16GB 8.07, Partition 1
P0: 2.5&quot; SATA SSD 3MG2-P
JetFlashTranscend 16GB 8.07
Launch EFI Shell from filesystem device</td><td>Exit system setup without saving any changes.</td></tr><tr><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2015 American Megatrends, Inc.</td></tr></table>

# Discard Changes and Exit

Discards all changes and exits BIOS setup

# Save Changes and Reset

Saves all changes and reboots the system, with new settings taking effect

# Discard Changes

Resets system setup without saving any changes

# Restore Defaults

Sets all BIOS options to default settings, designed for maximum system stability but less than maximum performance. Select

Restore Defaults if the computer encounters system configuration problems.

# Save as User Defaults

Saves all changes to this point as user defaults

# Restore User Defaults

Restores user defaults to all setup options

# Launch EFI Shell from filesystem device

Attempts to launch EFI Shell application (Shell.efi) from one of the available filesystem devices

This page intentionally left blank.

# Appendix C Watchdog Timer (WDT) Function Library

This appendix describes use of the watchdog timer (WDT) function library for the MVP-5000 controller. The watchdog timer is a hardware mechanism provided to reset the system if the operating system or an application stalls. After starting, the watchdog timer in the application must be periodically reset before the timer expires. Once the watchdog timer expires, a hardware-generated signal is sent to reset the system.

# C.1 WDT with API/Windows

Matrix WDT API library files and a demo program (incl. source code) can be downloaded from http://www.adlinktech.com.

To use the WDT function library for MVP-5000, include the header file matrix\_dio.h and linkage matrix\_dio.lib (matrix\_diox64.lib for 64-bit OS) in the C++ project.

WDT functions are as follows.

# AwIWatchdogGetCount

Determines whether WDT is supported.

Syntax

C/C++

int \_\_stdcall AwlWatchdogGetCount (Void)

Parameters

None

Return codes

0: No WDT supported

1: WDT supported

AwIWatchdogSetTrigger

Sets/disables WDT.

Syntax

```txt
C/C++
```

int \_\_stdcall AwlWatchdogSetTrigger(int Time, int isEnbaled)

# Parameters

Time

The period (in seconds) before WDT is triggered.

isEnabled

Directs WDT whether to start run timer, where 0 stops running or doesn't run, 1 starts running timer.

# Return codes

0: Operation successful

-1: Operation failed

# AwlWatchdogSetTrigger\_ex

Sets/disables WDT allows counter unit to be set to seconds or minutes.

# Syntax

```txt
C/C++
```

int \_\_stdcall AwlWatchdogSetTrigger\_ex(int Time, int Unit, int isEnbaled)

# Parameters

Time

The period (in seconds) before WDT is triggered.

Unit

Sets WDT counter unit to seconds or minutes, where 1 is in seconds, 60 is in minutes.

isEnabled

Directs WDT whether to start run timer, where 0 stops running or doesn't run, 1 starts running timer.

# Return codes

0: Operation successful

-1: Operation failed

# Appendix D Digital Input/Output Function Library

DI/O provides input/output to support inter-device communications. Simple programming guides allow easy transmission of digital signals between the system and attached peripherals.

# D.1 DI/O with API/Windows

Matrix DI/O API library files and a demo program (incl. source code) can be downloaded from http://www.adlinktech.com.

To use the DI/O function library for MVP-5000 series, include the header file matrix\_dio.h and linkage library matrix\_dio.lib (matrix\_diox64.lib for x64 OS) in the C++ project. DI/O functions are as follows.

# AwIDioCount

Retrieves the number of digital input/output lines supported by platform.

# Syntax

```solidity
C/C++
int __stdcall AwlDioCount(void)
```

# Parameter(s)

None

# Return codes

```txt
int : number of digital input/output lines supported by platform
```

# AwIDioGetValue

Reads the digital logic state of a digital input/output line.

# Syntax

```txt
C/C++
int __stdcall AwlDioGetValue(int Index)
```

# Parameter(s)

Index

Indexes MVP-5000 digital input channels 1 to 8 (corresponding value 0 to 7)

Index of MVP-5000 digital input channels 9 to 16 (corresponding value 8 to 15).

# Return codes

0: Corresponding input/output line is HIGH

-1: Corresponding input/output line is LOw

# AwIDioGetInfo

Reads the info string of a digital input/output line.

# Syntax

C/C++

int \_\_stdcall AwlDioGetInfo(int Index)

# Parameter(s)

Index

Indexes MVP-5000 digital input channels 1 to 8 (corresponding value 0 to 7), index of MVP-5000 digital input channels 9 to 16 (corresponding value 8 to 15)

# Return codes

0: Operation is successful

-1: Operation failed

# AwIDioSetValue

Sets the digital logic state of the digital output line.

# Syntax

C/C++

int \_\_stdcall AwlDioSetValue(int Index, int Value)

# Parameter(s)

Index

Indexes the digital logic state of MVP-5000 digital output channels 1 to 8 (corresponding value 0 to 7)

Value

Sets the digital logic state of MVP-5000 digital output channels 1 to 8 ((corresponding value 0 to 7) to 0 (low) or 1 (high).

# Return codes

0: Operation Success

-1: Operation Failed

This page intentionally left blank.

# Important Safety Instructions

For user safety, please read and follow all instructions, Warnings, Cautions, and Notes marked in this manual and on the associated device before handling/operating the device, to avoid injury or damage.

S'il vous plaît prêter attention stricte à tous les avertissements et mises en garde figurant sur l'appareil, pour éviter des blessures ou des dommages.

▶ Read these safety instructions carefully
- Keep the User’s Manual for future reference
▶ Read the Specifications section of this manual for detailed information on the recommended operating environment
▶ The device can be operated at an ambient temperature of $50^{\circ}$ C
- When installing/mounting or uninstalling/removing device; or when removal of a chassis cover is required for user servicing (See “Getting Started” on page 27.):

▷ Turn off power and unplug any power cords/cables
▷ Reinstall all chassis covers before restoring power

▶ To avoid electrical shock and/or damage to device:

▷ Keep device away from water or liquid sources
▷ Keep device away from high heat or humidity
▷ Keep device properly ventilated (do not block or cover ventilation openings)
▶ Always use recommended voltage and power source settings
▶ Always install and operate device near an easily accessible electrical outlet
▷ Secure the power cord (do not place any object on/over the power cord)
▶ Only install/attach and operate device on stable surfaces and/or recommended mountings

▶ If the device will not be used for long periods of time, turn off and unplug from its power source

▶ Never attempt to repair the device, which should only be serviced by qualified technical personnel using suitable tools
▶ A Lithium-type battery may be provided for uninterrupted backup or emergency power.

![The image displays a partial view of a warning sign. At the top, the text 'WARNI' is visible in black capital letters on a white background. Below this, a yellow triangle with a black border dominates the center, featuring a large black exclamation point inside. At the bottom left corner, the letter 'E' is visible on a white background.](.mvp-5000-series-manual-en-20170407-v1/65d6a81c6cf6c9dd5eb0ebe38f06c873bc4c6712be9aa9d82ee8ef8f817f78c3.jpg)
CAUTION:

Risk of explosion if battery is replaced with one of an incorrect type; please dispose of used batteries appropriately.

Risque d'explosion si la pile est remplacée par une autre de type incorrect. Veuillez jeter les piles usagées de façon appropriée.

▶ The device must be serviced by authorized technicians when:

The power cord or plug is damaged
▷ Liquid has entered the device interior
The device has been exposed to high humidity and/or moisture
The device is not functioning or does not function according to the User's Manual
The device has been dropped and/or damaged and/or shows obvious signs of breakage

▶ Disconnect the power supply cord before loosening the thumbscrews and always fasten the thumbscrews with a screwdriver before starting the system up

It is recommended that the device be installed only in a server room or computer room where access is:

▶ Restricted to qualified service personnel or users familiar with restrictions applied to the location, reasons therefor, and any precautions required

▶ Only afforded by the use of a tool or lock and key, or other means of security, and controlled by the authority responsible for the location

![Warning sign depicting steam rising inside a yellow triangle, indicating hazardous or hazardous material.](.mvp-5000-series-manual-en-20170407-v1/c9be2070334bc5b28878b0d6f966cba21b102f36bd776f2348b0cad853dbb547.jpg)

# BURN HAZARD

Touching this surface could result in bodily injury. To reduce risk, allow the surface to cool before touching.

# RISQUE DE BRÛLURES

Ne touchez pas cette surface, cela pourrait entraîner des blessures.

Pour éviter tout danger, laissez la surface refroidir avant de la toucher.

This page intentionally left blank.

# Getting Service

Ask an Expert: http://askanexpert.adlinktech.com

# ADLINK Technology, Inc.

Address: 9F, No.166 Jian Yi Road, Zhonghe District
New Taipei City 235, Taiwan
新北市中和區建一路 166 號 9 樓

Tel: +886-2-8226-5877

Fax: +886-2-8226-5717

Email: service@adlinktech.com

# Ampro ADLINK Technology, Inc.

Address: 5215 Hellyer Avenue, #110
San Jose, CA 95138, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

Fax: +1-408-360-0222

Email: info@adlinktech.com

# ADLINK Technology (China) Co., Ltd.

Address: 上海市浦东新区张江高科技园区芳春路300号(201203)300 Fang Chun Rd., Zhangjiang Hi-Tech Park Pudong New Area, Shanghai, 201203 China

Tel: +86-21-5132-8988

Fax: +86-21-5132-3588

Email: market@adlinktech.com

# ADLINK Technology Beijing

Address: 北京市海淀区上地东路 1 号盈创动力大厦 E 座 801 室(100085)
Rm. 801, Power Creative E, No. 1 Shang Di East Rd.
Beijing, 100085 China

Tel: +86-10-5885-8666

Fax: +86-10-5885-8626

Email: market@adlinktech.com

# ADLINK Technology Shenzhen

Address: 深圳市南山区科技园南区高新南七道 数字技术园
A1 栋 2 楼 C 区 (518057)
2F, C Block, Bldg. A1, Cyber-Tech Zone, Gao Xin Ave. Sec. 7
High-Tech Industrial Park S., Shenzhen, 518054 China

Tel: +86-755-2643-4858

Fax: +86-755-2664-6353

Email: market@adlinktech.com

# LiPPERT ADLINK Technology GmbH

Address: Hans-Thoma-Strasse 11
D-68163 Mannheim, Germany

Tel: +49-621-43214-0

Fax: +49-621 43214-30

Email: emea@adlinktech.com

# PENTA ADLINK Technology GmbH

Ulrichsbergerstrasse 17
94469 Deggendorf, Germany

Tel: +49 (0) 991 290 94 - 10

Fax: +49 (0) 991 290 94 - 29

Email: emea@adlinktech.com

# ADLINK Technology, Inc. (French Liaison Office)

Address: 6 allée de Londres, Immeuble Ceylan
91940 Les Ulis, France

Tel: +33 (0) 1 60 12 35 66

Fax: +33 (0) 1 60 12 35 66

Email: france@adlinktech.com

# ADLINK Technology Japan Corporation

Address: 〒101-0045 東京都千代田区神田鍛冶町 3-7-4
神田 374 ビル 4F
KANDA374 Bldg. 4F, 3-7-4 Kanda Kajicho,
Chiyoda-ku, Tokyo 101-0045, Japan

Tel: +81-3-4455-3722

Fax: +81-3-5209-6013

Email: japan@adlinktech.com

# ADLINK Technology, Inc. (Korean Liaison Office)

Address: 경기도 성남시 분당구 수내로 46 번길 4 경동빌딩 2 층 (수내동 4-4 번지) (우) 463-825
2F, Kyungdong B/D, 4 Sunae-ro 46 beon-gil
Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-825

Toll Free +82-80-800-0585

Tel +82-31-786-0585

Fax +82-31-786-0583

Email: korea@adlinktech.com

# ADLINK Technology Singapore Pte. Ltd.

Address: 84 Genting Lane #07-02A, Cityneon Design Centre Singapore 349584

Tel: +65-6844-2261

Fax: +65-6844-2263

Email: singapore@adlinktech.com

# ADLINK Technology Singapore Pte. Ltd. (Indian Liaison Office)

Address: #50-56, First Floor, Spearhead Towers Margosa Main Road (between 16th/17th Cross) Malleswaram, Bangalore - 560 055, India

Tel: +91-80-65605817, +91-80-42246107

Fax: +91-80-23464606

Email: india@adlinktech.com

# ADLINK Technology, Inc. (Israeli Liaison Office)

Address: 27 Maskit St., Corex Building
PO Box 12777
Herzliya 4673300, Israel

Tel: +972-54-632-5251

Fax: +972-77-208-0230

Email: israel@adlinktech.com

# ADLINK Technology, Inc. (UK Liaison Office)

Tel: +44 774 010 59 65

Email: UK@adlinktech.com
[🔗 Link to the original document](.mvp-5000-series-manual-en-20170407-v1/mvp-5000-series-manual-en-20170407-v1.pdf)