## Slide 1

![This slide is a title page for a technical document. On the left side, against a white background, is the ADLINK logo (a red triangle) followed by the text 'ADLINK®' and the tagline 'Leading EDGE COMPUTING'. Below this, the text reads 'MVP-5100/6100', followed by the title 'SERVICE MANUAL ABOUT GETTING STARTED'. At the bottom left, the version is listed as 'Rev.: 1.1'.\n\nThe right side of the slide features a futuristic robot with a world map projected onto its head and various digital data charts and graphs overlaid on its body. Red geometric triangles separate the text area from the robot image.](.mvp-5100-6100-service-manual-rev1-1/slide-001.jpg)

## Slide 2

![This slide serves as a **Table of Contents** for a **Getting Started** guide. It lists topics for three different product models:\n\n**MVP-5100**\n*   Install HDD/SSD\n*   Install CFast Card\n*   Install M.2 module\n*   Install Mini PCIe module\n*   Wall mount\n\n**MVP-5100-MXM**\n*   Install HDD/SSD\n*   Install M.2 module\n*   Install Mini PCIe module\n*   Wall mount\n\n**MVP-6120/6140**\n*   Install HDD/SSD\n*   Install HDD/SSD (Option)\n*   Install CFast Card\n*   Install M.2 module\n*   Install Mini PCIe module\n*   Wall mount\n*   Install Fan Kit (Option)\n*   PCIe/PCI card’s max. dimension\n\n**Footer Information:**\n*   ADLINK\n*   Leading EDGE COMPUTING\n*   adlinktech.com](.mvp-5100-6100-service-manual-rev1-1/slide-002.jpg)

## Slide 3

![The slide displays 'MVP-5100' in large, dark grey text centered on a white background. At the bottom, a faint grey geometric wireframe pattern runs across. The bottom left features the ADLINK logo and brand name. The bottom center displays 'Leading EDGE COMPUTING' in red. The bottom right shows the website 'adlinktech.com'.](.mvp-5100-6100-service-manual-rev1-1/slide-003.jpg)

## Slide 4

![The slide is titled 'Install HDD/SSD'. It presents a two-step process for opening a device:\n\n1.  **Left Side:** The text '1. Remove the 6 bottom cover screws by screwdriver' sits above an image of a black device panel. Six red circles highlight the locations of the screws.\n2.  **Right Side:** The text '2. Remove the bottom cover by lifting' sits above an image of the same device. A large red arrow points upward in the center, indicating the direction to lift the cover, which is shown slightly raised.\n\nThe footer displays the ADLINK logo, the text 'Leading EDGE COMPUTING', and the website 'adlinktech.com'.](.mvp-5100-6100-service-manual-rev1-1/slide-004.jpg)

## Slide 5

![The slide titled **'Install HDD/SSD'** provides instructions for hardware installation:\n\n*   **Step 3:** The text reads, **'3. Release the hand screw to take the two bracket out.'** Below this is an image showing the interior of a computer chassis with a metal bracket installed. Four red circles highlight the locations of the hand screws on the bracket corners.\n*   **Step 4:** The text reads, **'4. Use 8 of the included M3 screws to fix two 2.5' HDD or SSD unit to the Tray from the accessory pack.'** Below this is an image showing a metal tray holding two 2.5-inch drives (circuit boards visible), secured by screws.\n*   **Note:** At the bottom, a note states: **'Note: 2.5' HDD or SSD maximum thickness support to 15mm'**\n*   **Footer:** The bottom left shows the **ADLINK** logo. The center reads **'Leading EDGE COMPUTING'**. The bottom right displays the website **'adlinktech.com'**.](.mvp-5100-6100-service-manual-rev1-1/slide-005.jpg)

## Slide 6

![**Install HDD/SSD**\n\n5. Gently seat the drive into the SATA connector on the PCB and 4 hand screws are fix to the bracket.\n\nADLINK\nLeading EDGE COMPUTING\nadlinktech.com](.mvp-5100-6100-service-manual-rev1-1/slide-006.jpg)

## Slide 7

![**Title:** Install CFast card\n\n**Left Instructions:**\n1. Remove the screws fixing the CFast socket cover on the front panel and remove the cover.\n\n**Right Instructions:**\n2. True the CFast card with the alignment guide.\n3. Gently insert the CFast card until it is firmly seated in the socket.\n\n**Image Text (Left Panel):**\n1, 2, 3, U3WD, U2, U1, 1, 3, 2, SS, CFast, COM3, COM4, DI/O\n\n**Image Text (Right Panel):**\nU2, U1, 1, 3, 2, SS, SS, CFast, CFX600, 64 GB, COM3, DI/O, CFast 2.0\n\n**Footer:**\nADLINK\nLeading EDGE COMPUTING\nadlinktech.com](.mvp-5100-6100-service-manual-rev1-1/slide-007.jpg)

## Slide 8

![**Title:** Install M.2 module\n\n**Section 1 (Left):**\n*   **Text:** '1. Gently pull the drive out of the SATA connector on the PCB after loosening the 4 hand screws.'\n*   **Image:** A photograph showing two silver hard drives (labeled '500GB' and 'HGST') mounted on a green circuit board. Red arrows point downward toward the drives, and red circles highlight the four screws securing them.\n\n**Section 2 (Right):**\n*   **Text:** '2. Use the included M3 standoff screw to fix it on the main board, The position depending on the size of M.2.'\n*   **Images:** Two photographs of a green motherboard.\n    *   The left image shows a shorter M.2 slot with a red circle highlighting a screw hole. Below it is a small image of a screw and the text 'M.2 size 3042'.\n    *   The right image shows a longer M.2 slot with a red circle highlighting a screw hole further down the board. Below it is the text 'M.2 size 2280'.\n\n**Footer:**\n*   Logo: ADLINK\n*   Text: Leading EDGE COMPUTING\n*   URL: adlinktech.com](.mvp-5100-6100-service-manual-rev1-1/slide-008.jpg)

## Slide 9

![The slide features the title 'Install M.2 module' at the top. Below this, the text reads: '3. Install the M.2 module and lock the included screw.'\n\nAn accompanying photograph shows a green circuit board with an M.2 card inserted. A red circle highlights the specific screw hole area near the top of the card where it is secured.\n\nAt the bottom of the slide, there is a footer containing the 'ADLINK' logo on the left, the text 'Leading EDGE COMPUTING' in the center, and the website 'adlinktech.com' on the right.](.mvp-5100-6100-service-manual-rev1-1/slide-009.jpg)

## Slide 10

![**Title:** Install Mini PCIe module\n\n**Left Section:**\n*   **Text:** '3. Gently pull the drive out of the SATA connector on the PCB after loosening the 4 hand screws.'\n*   **Image:** A photo showing two hard drives mounted on a circuit board. Red circles highlight the four corner screws holding the drives in place, and large red arrows point downward, indicating the direction to remove the drives.\n\n**Right Section:**\n*   **Text:** '4. Install the miniPCIe module and lock the included 2 M2.5 screws.'\n*   **Image:** A close-up photo of a green circuit board featuring a white module labeled 'SIERRA AirPrime'. Red circles highlight two screw locations near the module.\n\n**Footer:**\n*   **Logo:** ADLINK (with red triangle icon)\n*   **Slogan:** Leading EDGE COMPUTING\n*   **Website:** adlinktech.com](.mvp-5100-6100-service-manual-rev1-1/slide-010.jpg)

## Slide 11

![The slide is titled 'Wall-mount'.\n\nIt displays two steps for mounting a device:\n\n1.  **Text:** '1.Remove the 6 bottom cover screws by screwdriver'\n    **Image:** A photo of the bottom of a black chassis showing six screws circled in red.\n\n2.  **Text:** '2.Use the 6 M4 screws shipped with the controller to fix the 2 wall-mount brackets, also included, to the chassis, according to the spacing dimensions of the screw holes and brackets, as shown.'\n    **Image:** A photo showing two black brackets attached to the sides of the chassis, highlighted by red rectangular boxes and screws circled in red.\n\nThe footer contains the ADLINK logo on the left, 'Leading EDGE COMPUTING' in the center, and 'adlinktech.com' on the right.](.mvp-5100-6100-service-manual-rev1-1/slide-011.jpg)

## Slide 12

![This slide features a technical diagram titled 'Wall mount' at the top center.\n\nTo the right of the main diagram, the text reads:\n'3.Once final assembly as shown is complete, mount the MVP-5000 on the wall via screw holes.'\n\nThe main technical drawing displays a rectangular device with horizontal fins.\n*   **Vertical dimensions** listed on the right side of the device are: 186, 226, 239.\n*   **Horizontal dimensions** listed at the bottom are: 225, 238.\n*   The word '**Matrix**' is printed on the lower section of the device.\n\nA circular inset detail is located at the bottom right of the main drawing. It contains the following labels and dimensions:\n*   **R2.6**\n*   **R5**\n*   **20**\n*   **7.2**\n*   **5.2**\n*   Below the inset, small text reads: '細部拡大図 A' and '比例 2:1'.\n\nAt the bottom of the slide:\n*   Bottom left: **ADLINK** logo.\n*   Bottom center: **Leading EDGE COMPUTING** in red text.\n*   Bottom right: **adlinktech.com**](.mvp-5100-6100-service-manual-rev1-1/slide-012.jpg)

## Slide 13

![The slide features the text 'MVP-6120/6140' centered on a white background. At the bottom, there is a geometric line design containing the ADLINK logo on the left, the text 'Leading EDGE COMPUTING' in red in the center, and 'adlinktech.com' on the right.](.mvp-5100-6100-service-manual-rev1-1/slide-013.jpg)

## Slide 14

![The slide is titled 'Install HDD/SSD'.\n\nOn the left, the text reads: '1. Remove the top cover after loosening the hand screw'. Below this, an image shows a black computer chassis with a large red arrow pointing downward and a red circle highlighting a screw near the bottom right corner.\n\nOn the right, the text reads: '2. Remove the 4 rear base case screws by screwdriver'. Below this, an image shows the rear of the chassis with four screws highlighted by red circles.\n\nThe footer displays the ADLINK logo, the text 'Leading EDGE COMPUTING', and the website 'adlinktech.com'.](.mvp-5100-6100-service-manual-rev1-1/slide-014.jpg)

## Slide 15

![The slide is titled 'Install HDD/SSD'.\n\n**Left Section:**\n*   **Text:** '3. Remove the bracket by lifting'\n*   **Image:** A photo showing a metal bracket inside a computer chassis, highlighted by a red box and a red arrow pointing upward.\n\n**Right Section:**\n*   **Text:** '4. Use 8 of the included M3 screws to fix two 2.5' HDD or SSD unit to the bracket.'\n*   **Image:** Two photos showing SSD drives mounted in a metal bracket with screws indicated by red circles.\n\n**Footer/Note:**\n*   **Text:** 'Note: 2.5' HDD or SSD maximum thickness support to 9.5mm'\n*   **Branding:** 'ADLINK', 'Leading EDGE COMPUTING', 'adlinktech.com'](.mvp-5100-6100-service-manual-rev1-1/slide-015.jpg)

## Slide 16

![**Title:** Install HDD/SSD\n\n**Instruction:**\n3. Gently seat the drive into the SATA connector on the PCB.\n\n**Image Content:**\nA photo shows a black SSD drive being inserted into a metal drive bay, indicated by a red arrow pointing downward. The drive rests on a green circuit board (PCB). The label on the drive contains the following text: 'RoHS', 'FCC', 'CE', 'ADLINK', 'X100', 'SSD030117E-250-2A', 'SSD8 S11 D-grade', 'PN80 2.5' SSD 5200', 'SATA III 6 Gbps', '2.5' SATA Solid State Disk', 'SATA', 'SSD', and a small sticker reading 'S0'.\n\n**Footer:**\nADLINK, Leading EDGE COMPUTING, adlinktech.com](.mvp-5100-6100-service-manual-rev1-1/slide-016.jpg)

## Slide 17

![**Title:** Install HDD/SSD (option)\n\n**Left Side Components:**\n*   **Bracket X 1** (Image of metal bracket)\n*   **Screw X 8** (Image of a screw)\n*   **SATA/Power cable(short) X 1**\n*   **SATA /Power cable(long) X 1** (Images of cables)\n\n**Right Side Instructions & Specs:**\n*   **1. Combined with two 2.5' HDD or SSD**\n*   (Image showing bracket with cables attached)\n*   **Note:** 2.5' HDD or SSD maximum thickness support to 15mm\n\n**Footer:**\nADLINK Leading EDGE COMPUTING adlinktech.com](.mvp-5100-6100-service-manual-rev1-1/slide-017.jpg)

## Slide 18

![The slide is titled 'Install HDD/SSD (option)'. It presents two steps for disassembling a computer case:\n\n**Left Side:**\n*   **Text:** '1. Remove the top cover after loosening the hand screw.'\n*   **Image:** A photo of the top of a black computer case showing a large red arrow pointing downward and a red circle highlighting a screw near the bottom edge.\n\n**Right Side:**\n*   **Text:** '2. Remove the 4 side base case screws by screwdriver.'\n*   **Image:** A photo of the bottom of the computer case showing four screws circled in red at the corners.\n\n**Footer:**\n*   **Left:** ADLINK (logo)\n*   **Center:** Leading EDGE COMPUTING\n*   **Right:** adlinktech.com](.mvp-5100-6100-service-manual-rev1-1/slide-018.jpg)

## Slide 19

![The slide is titled **'Install HDD/SSD (option)'** and provides installation instructions:\n\n*   **Step 3:** Text reads, **'3. Put the HDD or SSD assembly into the system and lock the 4 side base case screws .'** It is accompanied by an image highlighting screw holes with red circles.\n*   **Step 4:** Text reads, **'4. Connect the cables to the PCB in sequence.'** It is accompanied by images showing numbered ports (1-4) and cable connections. Red text labels identify a **'SATA /Power cable(long)'** and a **'SATA /Power cable(short)'**.\n\nThe footer displays the **ADLINK** logo, the text **'Leading EDGE COMPUTING'**, and the website **'adlinktech.com'**.](.mvp-5100-6100-service-manual-rev1-1/slide-019.jpg)

## Slide 20

![**Title:** Install CFast card\n\n**Left Side:**\n*   **Text:** 1.Remove the screws fixing the CFast socket cover on the front panel and remove the cover.\n*   **Image:** Shows a black panel with various ports. The 'CFast' socket area is visible, with two screws securing the cover circled in red.\n\n**Right Side:**\n*   **Text:** 2. True the CFast card with the alignment guide. 3.Gently insert the CFast card until it is firmly seated in the socket.\n*   **Image:** Shows a 64 GB CFast card (labeled 'CFast 2.0' and 'CFX600') being inserted into a slot, indicated by a large red arrow pointing upward.\n\n**Footer:**\nADLINK Leading EDGE COMPUTING adlinktech.com](.mvp-5100-6100-service-manual-rev1-1/slide-020.jpg)

## Slide 21

![This slide is titled **'Install M.2 module'** and provides a two-step visual guide.\n\n**1. Remove the top cover after loosening the hand screw.**\n*   An image shows the side of a black computer chassis. A large red arrow points downward, and a red circle highlights a white hand screw located at the bottom right corner of the side panel.\n\n**2. Use the included M3 standoff screw to fix it on the main board, The position depending on the size of M.2.**\n*   Two images display a green circuit board with an M.2 SSD installed.\n    *   The left image highlights a screw hole with a red circle for a shorter drive. Below it, a small image of a screw is shown next to the text **'M.2 size 3042'**.\n    *   The right image highlights a different screw hole further up the board with a red circle for a longer drive. Below it is the text **'M.2 size 2280'**.\n\n**Footer:**\n*   Bottom left: **'ADLINK'** logo.\n*   Bottom center: **'Leading EDGE COMPUTING'** in red text.\n*   Bottom right: **'adlinktech.com'**](.mvp-5100-6100-service-manual-rev1-1/slide-021.jpg)

## Slide 22

![The slide is titled **'Install M.2 module'**. Below the title, the text instructs: **'3. Install the M.2 module and lock the included screw.'**\n\nThe image displays a green motherboard with a red circle highlighting a screw hole near the top left corner. Visible components include a white label for a Transcend SSD (part number TS128BTDN45600) and an installed M.2 stick labeled '59AB'.\n\nThe bottom of the slide features the **ADLINK** logo, the slogan **'Leading EDGE COMPUTING'**, and the URL **adlinktech.com**.](.mvp-5100-6100-service-manual-rev1-1/slide-022.jpg)

## Slide 23

![The slide is titled **'Install Mini PCIe module'**. It presents two instructional steps with accompanying images:\n\n1.  **'1. Remove the top cover after loosening the hand screw.'** The image shows a black device chassis with a red arrow pointing down and a red circle highlighting a screw near the bottom.\n2.  **'2. Install the miniPCIe module and lock the included 2 M2.5 screws.'** The image shows a green circuit board with a white wireless module installed and two red circles highlighting the screw locations.\n\nThe footer contains the **ADLINK** logo, the text **'Leading EDGE COMPUTING'**, and the URL **'adlinktech.com'**.](.mvp-5100-6100-service-manual-rev1-1/slide-023.jpg)

## Slide 24

![Wall mount for MVP-6120 (rear side)\n\n1. Use the 6 M4 screws shipped with the controller to fix the 2 wall-mount brackets, also included, to the chassis, according to the spacing dimensions of the screw holes and brackets, as shown.\n\nADLINK\nLeading EDGE COMPUTING\nadlinktech.com](.mvp-5100-6100-service-manual-rev1-1/slide-024.jpg)

## Slide 25

![The slide is titled '**Wall mount for MVP-6140 (rear side)**'.\n\nBelow the title is a single instruction point:\n'**1. Use the 6 M4 screws shipped with the controller to fix the 2 wall-mount brackets, also included, to the chassis, according to the spacing dimensions of the screw holes and brackets, as shown.**'\n\nThe slide displays two primary visual aids:\n*   **Left:** A photograph of the rear of a black chassis with two vertical metal brackets attached to the sides. Red circles highlight the screw locations on the brackets.\n*   **Right:** A technical line drawing (schematic) of the rear panel. It shows various ports labeled 'COM1', 'COM2', 'COM3', 'COM4', 'USB', 'VGA', 'DVI', 'HDMI', and 'LAN'. Dimension lines indicate measurements including 206, 219, 232, 93, 186, 210, 226, and 239.\n\nIn the bottom right corner, a detail view shows specific hole dimensions (5.2, 20, 25.2, 7.2) and includes the text '**詳細拡大図A**' and '**比例 2:1**'.\n\nThe bottom footer contains the **ADLINK** logo, the text '**Leading EDGE COMPUTING**', and the URL '**adlinktech.com**'.](.mvp-5100-6100-service-manual-rev1-1/slide-025.jpg)

## Slide 26

![The slide presents technical instructions and diagrams for a wall mount installation.\n\n**Title:** Wall mount for MVP-6120/6140 (right side)\n\n**Instruction:**\n1. Use the 6 M4 screws shipped with the controller to fix the 2 wall-mount brackets, also included, to the chassis, according to the spacing dimensions of the screw holes and brackets, as shown.\n\n**Diagram Labels and Dimensions:**\n- Vertical text on the device: Matrix\n- Vertical dimensions: 225, 238\n- Horizontal dimensions: 93, 186, 226, 239\n- Detail view dimensions: 25.2, 7.2, 6.2 (twice), R5, 20\n- Detail view text: 細部拡大図 B, 比例 2:1\n\n**Footer:**\n- ADLINK\n- Leading EDGE COMPUTING\n- adlinktech.com](.mvp-5100-6100-service-manual-rev1-1/slide-026.jpg)

## Slide 27

![The slide is titled '**Install Fan kit (option)**' at the top center.\n\nIn the center is a photograph of a silver metal fan housing unit. One side features a black mesh grille, and a black cable with a white multi-pin connector extends from the side.\n\nBelow the image, the text reads '**FAN KIT X 1**'.\n\nAt the bottom, there is a footer containing the **ADLINK** logo on the left, the slogan '**Leading EDGE COMPUTING**' in red in the center, and the website '**adlinktech.com**' on the right. A faint geometric line pattern runs across the bottom edge.](.mvp-5100-6100-service-manual-rev1-1/slide-027.jpg)

## Slide 28

![**Slide Title:** Install Fan kit (option)\n\n**Step 1:**\n'1. Remove the top cover after loosening the hand screw.'\n*   **Visual:** A black computer chassis is shown. A red arrow points downward toward the top cover, and a red circle highlights a hand screw located on the bottom right corner of the side panel.\n\n**Step 2:**\n'2. First connect the fan connector to the PCB, and then fasten the FAN ASSM SET to the chassis.'\n*   **Visual:** Two images are displayed. The first shows a hand plugging a white connector into a green circuit board, with the connection area circled in red. The second shows a silver fan assembly being installed into the chassis, indicated by two red arrows (one vertical, one diagonal) and a red circle highlighting a screw on the side.\n\n**Footer:**\nADLINK Leading EDGE COMPUTING adlinktech.com](.mvp-5100-6100-service-manual-rev1-1/slide-028.jpg)

## Slide 29

![The slide is titled 'Max. PCI/PCIe card dimension'.\n\nOn the left, a technical diagram of a card is displayed with text above it reading: 'When SSD/HDD thickness ≤ 9.5mm , L:200mm' and 'When SSD/HDD thickness )9.5mm & ≤ 15mm , L:195mm'. A label points to the side of the card reading 'Standard height: 111.28mm(Max)'.\n\nOn the right, two cutaway diagrams show internal drive bays. A red line points from the text 'SSD/HDD thickness≤9.5mm' to a diagram featuring a blue drive. Another red line points from 'SSD/HDD thickness )9.5mm & ≤15mm' to a diagram featuring a red drive.\n\nThe footer contains the logo 'ADLINK', the text 'Leading EDGE COMPUTING', and the URL 'adlinktech.com'.](.mvp-5100-6100-service-manual-rev1-1/slide-029.jpg)

## Slide 30

![The slide features a white background with the centered text '**MVP-5100-MXM**' in dark grey. The bottom section contains a faint, grey geometric line pattern. Along the bottom edge, from left to right, are the **ADLINK** logo (with a red triangle), the red text '**Leading EDGE COMPUTING**', and the grey text '**adlinktech.com**'.](.mvp-5100-6100-service-manual-rev1-1/slide-030.jpg)

## Slide 31

![The slide is titled **Install HDD/SSD**.\n\nIt presents two steps for removing a heatsink:\n\n**1. Remove the 6 HEATSINK screws by screwdriver**\nAn image below shows a black heatsink with red circles highlighting the locations of six screws on the top, middle, and bottom mounting bars.\n\n**2. Remove the HEATSINK by lifting**\nAn image below shows hands lifting the heatsink off a chassis, with red curved arrows indicating an upward lifting motion.\n\nThe footer displays the **ADLINK** logo and name, the text **Leading EDGE COMPUTING**, and the website **adlinktech.com**.](.mvp-5100-6100-service-manual-rev1-1/slide-031.jpg)

## Slide 32

![Install HDD/SSD\n\n3. Release the FPC’ PClex16 golden finger.\n\n4. Release the hand screw to take the two bracket out.\n\nADLINK\nLeading EDGE COMPUTING\nadlinktech.com](.mvp-5100-6100-service-manual-rev1-1/slide-032.jpg)

## Slide 33

![The slide is titled '**Install HDD/SSD**' and presents a two-step process accompanied by images.\n\n**Left Side:**\n*   **Text:** '5. Use 8 of the included M3 screws to fix two 2.5' HDD or SSD unit to the bracket from the accessory pack.'\n*   **Image:** A metal bracket holding two green circuit boards (representing HDD/SSD units).\n\n**Right Side:**\n*   **Text:** '6. Gently seat the drive into the SATA connector on the PCB and 4 hand screws are fix to the bracket. 7. Replace the FPC' PClex16 golden finger and HEATSINK and refasten screws.'\n*   **Image:** Two silver hard drives installed inside a chassis, with red arrows pointing up at the drives and red circles highlighting screw locations at the corners.\n\n**Footer:**\n*   Logo and text: '**ADLINK**'\n*   Text: '**Leading EDGE COMPUTING**'\n*   URL: '**adlinktech.com**'](.mvp-5100-6100-service-manual-rev1-1/slide-033.jpg)

## Slide 34

![The slide is titled **Install M.2 module**.\n\n**1. Gently pull the drive out of the SATA connector on the PCB after loosening the 4 hand screws.**\nThis text accompanies an image of a hard drive (labeled 500GB HGST) secured in a chassis, with red circles highlighting four screws and red arrows pointing downward.\n\n**2. Use the included M3 standoff screw to fix it on the main board, The position depending on the size of M.2.**\nThis text accompanies a split image showing a green circuit board with red circles highlighting screw standoff locations. Below the images are labels reading **M.2 size 3042** and **M.2 size 2280**. A small image of a single standoff screw is shown next to the 3042 label.\n\nThe footer displays the logo **ADLINK**, the text **Leading EDGE COMPUTING**, and the URL **adlinktech.com**.](.mvp-5100-6100-service-manual-rev1-1/slide-034.jpg)

## Slide 35

![This slide is titled 'Install M.2 module.' Below the title, step 3 instructs: '3. Install the M.2 module and lock the included screw.'\n\nAn image displays a green motherboard featuring a RAM stick on the right and a component with a white 'Transcend' label on the left. A red circle highlights a screw hole area near the top left corner.\n\nThe footer contains the 'ADLINK' logo on the left, 'Leading EDGE COMPUTING' in the center, and 'adlinktech.com' on the right.](.mvp-5100-6100-service-manual-rev1-1/slide-035.jpg)

## Slide 36

![The slide is titled 'Install Mini PCIe module' and presents a two-step installation guide.\n\n**Step 1:** The text reads, '1. Gently pull the drive out of the SATA connector on the PCB after loosening the 4 hand screws.' This is paired with an image showing two HGST hard drives (labeled 500GB) secured in a chassis, with red circles highlighting four screws and red arrows pointing downward to indicate removal.\n\n**Step 2:** The text reads, '2. Install the miniPCIe module and lock the included 2 M2.5 screws.' This is paired with an image of a green circuit board featuring a Sierra Wireless AirPrime module (MC8795V), with red circles highlighting two screws used to secure it.\n\nThe footer contains the ADLINK logo, the text 'Leading EDGE COMPUTING', and the URL 'adlinktech.com'.](.mvp-5100-6100-service-manual-rev1-1/slide-036.jpg)

## Slide 37

![The slide is titled 'Wall mount'.\n\nThe instructional text reads:\n'1. Use the 6 M4 screws shipped with the controller to fix the 2 wall-mount brackets, also included, to the chass according to the spacing dimensions of the screw hole and brackets, as shown.'\n\nTo the left is a photograph of the black brackets mounted on a device with red circles highlighting screw holes. To the right is a technical line drawing of the device with blue dimension lines.\n\nThe specific dimensions shown in the technical drawing are:\n*   Vertical measurements on the right: 186, 226, 239\n*   Horizontal measurements at the bottom: 225, 238\n*   A detail view on the far right includes: R5, 25.20, 5.20, 7.20, and 5.20.\n\nThe word 'Matrix' is visible on the device in the drawing.\n\nThe footer contains the ADLINK logo, the text 'Leading EDGE COMPUTING', and the website 'adlinktech.com'.](.mvp-5100-6100-service-manual-rev1-1/slide-037.jpg)

## Slide 38

![**Title:** Wall mount\n\n**Instruction:** 1. Use the 6 M4 screws shipped with the controller to fix the 2 wall-mount brackets, also included, to the chassis, according to the spacing dimensions of the screw holes and brackets, as shown.\n\n**Footer:** ADLINK Leading EDGE COMPUTING adlinktech.com\n\n**Visuals:**\n*   **Left:** A photograph of the rear of a black chassis with two mounting brackets attached. Red circles highlight the six screw locations on the brackets.\n*   **Right:** A technical line drawing of the rear panel showing port labels (including ADLINK, COM3, COM2, COM1, CFast, VGA, and 12V~24V DC IN) and vertical/horizontal dimension lines (186, 226, 239, 138, 151).\n*   **Bottom Right:** A detailed view of a mounting bracket hole showing dimensions (R5, 25.20, 5.20, 7.20, 5.20).](.mvp-5100-6100-service-manual-rev1-1/slide-038.jpg)

## Slide 39

![The slide features a large, angled graphic of a blue circuit board with red lines and dots overlaid on it. Centered at the bottom on a white background is the logo, which displays the text **ADLINK** and the tagline **Leading EDGE COMPUTING**, preceded by a registered trademark symbol (®).](.mvp-5100-6100-service-manual-rev1-1/slide-039.jpg)

[🔗 Link to the original document](.mvp-5100-6100-service-manual-rev1-1/mvp-5100-6100-service-manual-rev1-1.pdf)