# MVP-6200 Series

Value Line

12th Gen Intel® Core™ i9/i7/i5/i3

Embedded Fanless Computer

MVP-6220/MVP-6240

User’s Manual

![Exterior view of two black ADLINK network modules with multiple ports and connectors (no visible text or symbols)](.mvp-6200-50m-41053-1000-10/58cc23e22b037eaa6a1bdedd6b0ead9691f412dbff049bfca46dc4972a094466.jpg)

Manual Rev.: 1.0

Revision Date: June 7, 2023

Part No: 50M-41053-1000

Revision History

<table><tr><td>Revision</td><td>Release Date</td><td>Description of Change(s)</td></tr><tr><td>1.0</td><td>2023-06-07</td><td>Initial release</td></tr></table>

# Preface

# Copyright © 2023 ADLINK Technology Inc.

This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

# Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

# Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.

![Symbol of a trash bin crossed with two crossed lines and a blank rectangular base (no text or labels)](.mvp-6200-50m-41053-1000-10/11137bb1fb9847243f583dcc1efa0c23aa436c4bcfcc023fd574ec6949b19e82.jpg)

Battery Labels (for products with battery)

![Symbol of a trash bin crossed out by two diagonal lines (no text or numbers present)](.mvp-6200-50m-41053-1000-10/56c5e72cba3ce86be83b367250b77dfd06e8a2386f7abb678e6b576d7fb13eb8.jpg)

![Recycling symbol icon with three chasing arrows inside a square frame (no text or labels)](.mvp-6200-50m-41053-1000-10/b5e64dff58a67da7721f1824f0b93d2001717ba4651a1468b946e86f86570853.jpg)

Li-ion

![RECYCLE\nRBRC\nLi-ion\n1.800.822.8837](.mvp-6200-50m-41053-1000-10/0b75da9fb8db7a1dc7da0b3cfa068cc3014729794d47611ab8625b14f05d76a2.jpg)

![Abstract geometric pattern with interlocking X and Y shapes (no text or symbols)](.mvp-6200-50m-41053-1000-10/b59fcf13b7a9f31a0e046fef7d79fb2d8605d4561f43e809807b2fd06cc2f170.jpg)

ᘄ㟁ụㄳᅇᨲ

# California Proposition 65 Warning

![The image displays a yellow triangular warning sign with a thick black border. Centered within the triangle is a black exclamation point.](.mvp-6200-50m-41053-1000-10/260b92f60d62a8e29c7798cd33b93dd78b0607b8919e04955023f84dc1826b77.jpg)

WARNING: This product can expose you to chemicals including acrylamide, arsenic, benzene, cadmium, Tris(1,3-dichloro-2-propyl) phosphate (TDCPP), 1,4- Dioxane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and vinyl materials, which are known to the State of California to cause cancer, and acrylamide, benzene, cadmium, lead, mercury, phthalates, toluene, DEHP, DIDP, DnHP, DBP, BBP, PVC, and vinyl materials, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

# Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

# Conventions

Take note of the following conventions used throughout this manual to make sure that users perform certain tasks and instructions properly.

![The image shows a white document icon with a folded top-right corner and horizontal lines, overlaid by a large red checkmark.](.mvp-6200-50m-41053-1000-10/a14729b35d01879067a4fd1f5e2730a0289d0d5e47720882d27c0da5e2f013f2.jpg)
NOTE:

Additional information, aids, and tips that help users perform tasks.

![The image shows a yellow triangular warning sign with a black border. Inside the triangle is a large, black exclamation point. A thin black line runs horizontally across the top edge of the image, just above the peak of the triangle.](.mvp-6200-50m-41053-1000-10/2c6c375b99e2757a9c84ac60fba2af5b3058838f31a331b79318f4c5eba520ff.jpg)
CAUTION:

Information to prevent minor physical injury, component damage, data loss, and/or program corruption when trying to complete a task.

ATTENTION: Informations destinées à prévenir les blessures corporelles mineures, les dommages aux composants, la perte de données et/ou la corruption de programme lors de l'exécution d'une tâche.

![The image displays a red triangular warning sign containing a large white exclamation mark in its center, set against a white background.](.mvp-6200-50m-41053-1000-10/91c19ba04caa22c02dc3e3c6c9115fd2ba6b3c5d086fdfdf61a0d42e9a6c1031.jpg)
WARNING:

Information to prevent serious physical injury, component damage, data loss, and/or program corruption when trying to complete a specific task.

AVERTISSEMENT: Informations destinées à prévenir les blessures corporelles graves, les dommages aux composants, la perte de données et/ou la corruption de programme lors de l'exécution d'une tâche spécifique.

# Table of Contents

# Revision History............ ii

# Preface .......... iii

# List of Tables ........ . vii

# List of Figures ........ ix

# 1 Introduction .........

1.1 Overview... 1
1.2 Features... 2
1.3 Packing List ..... 2
1.4 Optional Accessories .... 2

# 2 Specifications ........ 3

2.1 MVP-6249, MVP-6247. 3
2.2 MVP-6247T, MVP-6245T . 5
2.3 MVP-6229, MVP-6227.. 7
2.4 MVP-6227T, MVP-6225T . 9
2.5 MVP-6200 Series Functional Block Diagram..... 1 1
2.6 Display Options... 11
2.7 Mechanical... 12

# 3 System Layout......... . 17

3.1 Front/Side Panel I/O .. 17
3.2 Internal I/O Connectors.. 28

# 4 Getting Started ..... 39

4.1 Package Contents .... 39
4.2 Attach DC Power Connector..... 39
4.3 Installing Components . 40
4.4 Mounting the MVP-6200 Series.. 5 2
4.5 PCIe/PCI Board Clearance.. 54
4.6 Driver Installation .... 55

# A Appendix: Power......... .....57

A.1 Power Consumption Reference.... 57

# B Appendix: BIOS Setup.............. ......59

B.1 Main ... 60

B.2 Advanced.. 62

B.3 Chipset.. 78

B.4 Security .... 90

B.5 Boot ... 92

B.6 Save & Exit ... 94

B.7 MEBx ... 96

# C Appendix: Watchdog Timer (WDT) Function Library .....97

C.1 WDT with API/Windows.. 97

C.2 WDT with DOS/Linux... 100

# D Appendix: Digital Input/Output Function Library .........103

# Important Safety Instructions.......... .... 105

# Consignes de Sécurité Importante ......... .... 107

# Getting Service ......... .... 111

# List of Tables

Table 2-1: Maximum Resolution Display Configurations ........... 11

Table 3-1: Front/Side Panel I/O Legend . . 18

Table 3-2: External Power Button Connector Pin Definition ...... 20

Table 3-3: DisplayPort Pin Definition .. . 21

Table 3-4: Digital Input/Output Connector Pin Definition ........... 22

Table 3-5: HDMI Connector Pin Definition.. . 24

Table 3-6: Ethernet Port Pin Definition . .. 25

Table 3-7: Active/Link LED Indicators... . 25

Table 3-8: Speed LED Indicators... . 25

Table 3-9: DC Power Input Pin Definition .. . 26

Table 3-10: D-Sub 9-pin Signal Function of COM Ports .............. 27

Table 3-11: Mainboard Top Connector Legend. . 29

Table 3-12: Mainboard Bottom Connector Legend.. . 31

Table 3-13: 2-slot Backplane Card Legend .. . 32

Table 3-14: 4-slot Backplane Card Legend . . 33

Table 3-15: SATA Connector Pin Definition . . 34

Table 3-16: USB Port Pin Definition .. .. 34

Table 3-17: 12V Fan Connector Pin Definition ... .. 35

Table 3-18: External Power/Reset Header Pin Definition ............ 35

Table 3-19: I2C Connector Pin Definition .. . 36

Table 3-20: Micro-SIM Slot Pin Definition ... . 37

Table 3-21: 12V Power Pin Definition... . 37

Table A-1: Power Consumption ... .. 57

This page intentionally left blank.

# List of Figures

Figure 2-1: MVP-6200 Series Functional Block Diagram.. ... 11

Figure 2-2: MVP-6200 Series Top View... . 12

Figure 2-3: MVP-6200 Series 2 Slot Front View ... . 13

Figure 2-4: MVP-6200 Series 2 Slot Mounting.... . 14

Figure 2-5: MVP-6200 Series 4 Slot Front View .... .. 15

Figure 2-6: MVP-6200 Series 4 Slot Mounting.. . 16

Figure 3-1: Front Panel I/O . 17

Figure 3-2: Side Panel I/O . . 17

Figure 3-3: External Power Button Connector . .. 20

Figure 3-4: DisplayPort Connector Pin Definition... .. 21

Figure 3-5: Digital I/O Connector Pin Definition .... .. 22

Figure 3-6: Digital Input Circuit.. . 23

Figure 3-7: Digital Output Circuit. . 23

Figure 3-8: Ethernet Port and LEDs... . 25

Figure 3-9: DC Power Input . .. 26

Figure 3-10: COM Port Pin Definition.. . 27

Figure 3-11: Mainboard Top Connectors .. .. 28

Figure 3-12: Mainboard Bottom Connectors. .. 30

Figure 3-13: 2-slot Backplane Card . . 32

Figure 3-14: 4-slot Backplane Card . . 33

Figure 3-15: SATA Connector.. . 34

Figure 3-16: USB Port.. . 34

Figure 3-17: 12V Fan Connector Pin Definition . .. 35

Figure 3-18: External Power/Reset Header Pin Definition... .. 35

Figure 3-19: I2C Connector Pin Definition . . 36

Figure 3-20: Micro-SIM Slot .. .. 36

Figure 3-21: 12V Power Pin Definition... . 37

This page intentionally left blank.

# 1 Introduction

# 1.1 Overview

ADLINK’s MVP-6200 Series of value line fanless embedded computing platforms, incorporating Intel® Core™ processors, provides one PCIe x16 and one PCI slot for a 2-slot backplane and one PCIe x16, two PCIe x4 and one PCI for a 4-slot backplane and also includes single-side access for I/O ports, optimizing easy maintenance in industrial automation environments. This series retains the robust design of all ADLINK MXC/MXE lines at a new, extremely cost-effective price point. The MVP-6200 series supports DDR5 memory for more powerful computing and the Intel® UHD Graphics 770 speeds graphics performance. Along with a versatile I/O array and flexible expansion capacity, the MVP-6200 Series fully satisfies all the needs of industrial automation (IA) with the performance demanded by vision inspection, motion control, and surveillance applications. Fanless construction not only overcomes contaminant and noise challenges presented by harsh IA environments, the elimination of problematic structural elements that negatively affect MTBF greatly increases lifecycle expectations for the platform.

# 1.2 Features

 12th Generation Intel® Core™ i9/i7/i5/i3 FCLGA1700 processor and R680E chipset
 4x DDR5 SODIMM socket, supporting up to 128GB DDR5 3600 SODIMM module
 Expansion:
 MVP-6220 Series: 1x PCIe x16 + 1x PCI
 MVP-6240 Series: 1x PCIe x16 + 2x PCIe x4 + 1x PCI
 PCIe x16 supports Gen4 PCIe cards
 2x DisplayPort, 2x HDMI, supporting 4 independent displays
 6x External USB ports (4x USB 3.2 Gen 2, 2x USB 3.2 Gen 1)
 3x Intel 2.5Gbe i225 LAN ports with TSN support
 Built-in 8-ch DI and 8-ch DO, 2 software-programmable RS-232/422/485 + 2 RS-232 ports
 Onboard SATA 6Gb/s port for 2.5” HDD/SSD installation
 Built-in wide-range 9V DC to 32V DC power input

# 1.3 Packing List

Before unpacking, check the shipping carton for any damage. If the shipping carton and/or contents are damaged, inform your dealer immediately. Retain the shipping carton and packing materials for inspection. Obtain authorization from your dealer before returning any product to ADLINK. Ensure that the following items are included in the package.

 MVP-6200 Series Fanless Embedded Computer

 Accessory Box

 DC power jack
 Wall-mount brackets
 Screw pack

# 1.4 Optional Accessories

 AC/DC Adapter
 280W (P/N: 31-62162-1010-A0)

# 2 Specifications

2.1 MVP-6249, MVP-6247

<table><tr><td></td><td>MVP-6249</td><td>MVP-6247</td></tr><tr><td colspan="3">System Core</td></tr><tr><td>Processor</td><td>Intel® CoreTM i9-12900E(16-cores, 65W, up to 5.00 GHz)</td><td>Intel® CoreTM i7-12700E(12-cores, 65W, up to 4.80 GHz)</td></tr><tr><td>Chipset</td><td colspan="2">R680E</td></tr><tr><td>Memory</td><td colspan="2">4x SODIMM DDR5 3600 MHz, up to 128 GB</td></tr><tr><td colspan="3">I/O Interface</td></tr><tr><td>Display</td><td colspan="2">2x DP++, 2x HDMI (4 independent displays)</td></tr><tr><td>Expansion</td><td colspan="2">PCIe Gen4 x16 + 2 PCIe Gen3 x4 + PCI</td></tr><tr><td>Ethernet</td><td colspan="2">3x 2.5 GbE with TSN supported (i225)1x vPro supported</td></tr><tr><td>Serial Ports</td><td colspan="2">COM1/2: RS-232/422/485COM3/4: RS-232COM5/6: Header, Reserved</td></tr><tr><td>DI/O</td><td colspan="2">8-ch DI and 8-ch DO</td></tr><tr><td>USB</td><td colspan="2">4x USB 3.2 Gen2 + 2x USB 3.2 Gen1</td></tr><tr><td>Audio</td><td colspan="2">Line-out, Mic-in</td></tr><tr><td>M.2</td><td colspan="2">1x M.2 socket 1, Key E, 2230 (PCIe Gen3 x1)1x M.2 socket 2, Key B, 3052/3042 (PCIe Gen3 x1 / USB3)1x M.2 socket 3, Key M, NVMe, 2280 (PCIe Gen3 x4)</td></tr><tr><td>Micro SIM</td><td colspan="2">2</td></tr><tr><td>I2C</td><td colspan="2">2 (3.3V/5V)</td></tr><tr><td>TPM</td><td colspan="2">TPM 2.0</td></tr><tr><td colspan="3">Storage</td></tr><tr><td>2.5" SATA</td><td colspan="2">2 (3 total w/ optional kit)</td></tr><tr><td colspan="3">Physical</td></tr><tr><td>Dimensions</td><td colspan="2">210 (W) x 240 (D) x 206 (H) mm (8.27" x 9.45" x 8.11")</td></tr><tr><td>Weight</td><td colspan="2">5.4 kg (11.8 lbs)</td></tr><tr><td>Mounting</td><td colspan="2">Wall mountable</td></tr><tr><td colspan="3">Power Supply</td></tr><tr><td>DC Input</td><td colspan="2">9 to 32V</td></tr><tr><td>AC Input</td><td colspan="2">280W AC adapter (P/N: 31-62162-1010-A0)</td></tr><tr><td colspan="3">Environmental</td></tr><tr><td>Standard Operating Temperature</td><td colspan="2">0°C to 50°C, w/ airflow 0.6 m/s</td></tr><tr><td>Extended Operating Temperature</td><td colspan="2">-20°C to 50°C, w/ airflow 0.6 m/s(w/ industrial storage)</td></tr><tr><td>Storage Temperature</td><td colspan="2">-40°C to 85°C (excluding storage devices)</td></tr><tr><td>Humidity</td><td colspan="2">approx. 95% @ 40°C (non-condensing)</td></tr><tr><td>Vibration</td><td colspan="2">Operating: 5 Grms, 5-500 Hz, 3 axes (w/2.5" SSD)Operating: 0.5 Grms, 5-500 Hz, 3 axes (w/ HDD)</td></tr><tr><td>Shock</td><td colspan="2">Operating: 50 Grms, half sine 11ms duration (w/ 2.5" SSD)</td></tr><tr><td>ESD</td><td colspan="2">Contact +/-4kV, Air +/-8kV</td></tr><tr><td>EMC</td><td colspan="2">EN61000-6-4/-2, CE &amp; FCC Class A</td></tr><tr><td>Safety</td><td colspan="2">UL/cUL, CB</td></tr></table>

2.2 MVP-6247T, MVP-6245T

<table><tr><td></td><td>MVP-6247T</td><td>MVP-6245T</td></tr><tr><td colspan="3">System Core</td></tr><tr><td>Processor</td><td>Intel® CoreTM i7-12700TE(12-cores, 35W, up to 4.60 GHz)</td><td>Intel® CoreTM i5-12500TE(6-cores, 35W, up to 4.30 GHz)</td></tr><tr><td>Chipset</td><td colspan="2">R680E</td></tr><tr><td>Memory</td><td colspan="2">4x SODIMM DDR5 3600 MHz, up to 128 GB</td></tr><tr><td colspan="3">I/O Interface</td></tr><tr><td>Display</td><td colspan="2">2xDP++, 2xHDMI (4 independent displays)</td></tr><tr><td>Expansion</td><td colspan="2">PCIe Gen4 x16 + 2 PCIe Gen3 x4 + PCI</td></tr><tr><td>Ethernet</td><td colspan="2">3x 2.5 GbE with TSN supported (i225)1x vPro supported</td></tr><tr><td>Serial Ports</td><td colspan="2">COM1/2: RS-232/422/485COM3/4: RS-232COM5/6: Header, Reserved</td></tr><tr><td>DI/O</td><td colspan="2">8-ch DI and 8-ch DO</td></tr><tr><td>USB</td><td colspan="2">4x USB 3.2 Gen2 + 2x USB 3.2 Gen1</td></tr><tr><td>Audio</td><td colspan="2">Line-out, Mic-in</td></tr><tr><td>M.2</td><td colspan="2">1x M.2 socket 1, Key E, 2230 (PCIe Gen3 x1)1x M.2 socket 2, Key B, 3052/3042 (PCIe Gen3 x1 / USB3)1x M.2 socket 3, Key M, NVMe, 2280 (PCIe Gen3 x4)</td></tr><tr><td>Micro SIM</td><td colspan="2">2</td></tr><tr><td>I2C</td><td colspan="2">2 (3.3V/5V)</td></tr><tr><td>TPM</td><td colspan="2">TPM 2.0</td></tr><tr><td colspan="3">Storage</td></tr><tr><td>2.5" SATA</td><td colspan="2">2 (3 total w/ optional kit)</td></tr><tr><td colspan="3">Physical</td></tr><tr><td>Dimensions</td><td colspan="2">210 (W) x 240 (D) x 206 (H) mm (8.27" x 9.45" x 8.11")</td></tr><tr><td>Weight</td><td colspan="2">5.4 kg (11.8 lbs)</td></tr><tr><td>Mounting</td><td colspan="2">Wall mountable</td></tr><tr><td colspan="3">Power Supply</td></tr><tr><td>DC Input</td><td colspan="2">9 to 32V</td></tr><tr><td>AC Input</td><td colspan="2">280W AC adapter (P/N: 31-62162-1010-A0)</td></tr><tr><td colspan="3">Environmental</td></tr><tr><td>Standard Operating Temperature</td><td colspan="2">0°C to 60°C, w/ airflow 0.6 m/s</td></tr><tr><td>Extended Operating Temperature</td><td colspan="2">-20°C to 60°C, w/ airflow 0.6 m/s(w/ industrial storage)</td></tr><tr><td>Storage Temperature</td><td colspan="2">-40°C to 85°C (excluding storage devices)</td></tr><tr><td>Humidity</td><td colspan="2">approx. 95% @ 40°C (non-condensing)</td></tr><tr><td>Vibration</td><td colspan="2">Operating: 5 Grms, 5-500 Hz, 3 axes (w/2.5" SSD)Operating: 0.5 Grms, 5-500 Hz, 3 axes (w/ HDD)</td></tr><tr><td>Shock</td><td colspan="2">Operating: 50 Grms, half sine 11ms duration (w/ 2.5" SSD)</td></tr><tr><td>ESD</td><td colspan="2">Contact +/-4kV, Air +/-8kV</td></tr><tr><td>EMC</td><td colspan="2">EN61000-6-4/-2, CE &amp; FCC Class A</td></tr><tr><td>Safety</td><td colspan="2">UL/cUL, CB, CCC</td></tr></table>

2.3 MVP-6229, MVP-6227

<table><tr><td></td><td>MVP-6229</td><td>MVP-6227</td></tr><tr><td colspan="3">System Core</td></tr><tr><td>Processor</td><td>Intel® CoreTM i9-12900E(16-cores, 65W, up to 5.00 GHz)</td><td>Intel® CoreTM i7-12700E(12-cores, 65W, up to 4.80 GHz)</td></tr><tr><td>Chipset</td><td colspan="2">R680E</td></tr><tr><td>Memory</td><td colspan="2">4x SODIMM DDR5 3600 MHz, up to 128 GB</td></tr><tr><td colspan="3">I/O Interface</td></tr><tr><td>Display</td><td colspan="2">2x DP++, 2x HDMI (4 independent displays)</td></tr><tr><td>Expansion</td><td colspan="2">PCIe Gen4 x16 + PCI</td></tr><tr><td>Ethernet</td><td colspan="2">3x 2.5 GbE with TSN supported (i225)1x vPro supported</td></tr><tr><td>Serial Ports</td><td colspan="2">COM1/2: RS-232/422/485COM3/4: RS-232COM5/6: Header, Reserved</td></tr><tr><td>DI/O</td><td colspan="2">8-ch DI and 8-ch DO</td></tr><tr><td>USB</td><td colspan="2">4x USB 3.2 Gen2 + 2x USB 3.2 Gen1</td></tr><tr><td>Audio</td><td colspan="2">Line-out, Mic-in</td></tr><tr><td>M.2</td><td colspan="2">1x M.2 socket 1, Key E, 2230 (PCIe Gen3 x1)1x M.2 socket 2, Key B, 3052/3042 (PCIe Gen3 x1 / USB3)1x M.2 socket 3, Key M, NVMe, 2280 (PCIe Gen3 x4)</td></tr><tr><td>Micro SIM</td><td colspan="2">2</td></tr><tr><td>I2C</td><td colspan="2">2 (3.3V/5V)</td></tr><tr><td>TPM</td><td colspan="2">TPM 2.0</td></tr><tr><td colspan="3">Storage</td></tr><tr><td>2.5" SATA</td><td colspan="2">2 (3 total w/ optional kit)</td></tr><tr><td colspan="3">Physical</td></tr><tr><td>Dimensions</td><td colspan="2">210 (W) x 240 (D) x 165 (H) mm (8.27" x 9.45" x 6.5")</td></tr><tr><td>Weight</td><td colspan="2">5.01 kg (11.04 lbs)</td></tr><tr><td>Mounting</td><td colspan="2">Wall mountable</td></tr><tr><td colspan="3">Power Supply</td></tr><tr><td>DC Input</td><td colspan="2">9 to 32V</td></tr><tr><td>AC Input</td><td colspan="2">280W AC adapter (P/N: 31-62162-1010-A0)</td></tr><tr><td colspan="3">Environmental</td></tr><tr><td>Standard Operating Temperature</td><td colspan="2">0°C to 50°C, w/ airflow 0.6 m/s</td></tr><tr><td>Extended Operating Temperature</td><td colspan="2">-20°C to 50°C, w/ airflow 0.6 m/s(w/ industrial storage)</td></tr><tr><td>Storage Temperature</td><td colspan="2">-40°C to 85°C (excluding storage devices)</td></tr><tr><td>Humidity</td><td colspan="2">approx. 95% @ 40°C (non-condensing)</td></tr><tr><td>Vibration</td><td colspan="2">Operating: 5 Grms, 5-500 Hz, 3 axes (w/2.5" SSD)Operating: 0.5 Grms, 5-500 Hz, 3 axes (w/ HDD)</td></tr><tr><td>Shock</td><td colspan="2">Operating: 50 Grms, half sine 11ms duration (w/ 2.5" SSD)</td></tr><tr><td>ESD</td><td colspan="2">Contact +/-4kV, Air +/-8kV</td></tr><tr><td>EMC</td><td colspan="2">EN61000-6-4/-2, CE &amp; FCC Class A</td></tr><tr><td>Safety</td><td colspan="2">UL/cUL, CB</td></tr></table>

2.4 MVP-6227T, MVP-6225T

<table><tr><td></td><td>MVP-6227T</td><td>MVP-6225T</td></tr><tr><td colspan="3">System Core</td></tr><tr><td>Processor</td><td>Intel® CoreTM i7-12700TE(12-cores, 35W, up to 4.60 GHz)</td><td>Intel® CoreTM i5-12500TE(6-cores, 35W, up to 4.30 GHz)</td></tr><tr><td>Chipset</td><td colspan="2">R680E</td></tr><tr><td>Memory</td><td colspan="2">4x SODIMM DDR5 3600 MHz, up to 128 GB</td></tr><tr><td colspan="3">I/O Interface</td></tr><tr><td>Display</td><td colspan="2">2xDP++, 2xHDMI (4 independent displays)</td></tr><tr><td>Expansion</td><td colspan="2">PCIe Gen4 x16 + PCI</td></tr><tr><td>Ethernet</td><td colspan="2">3x 2.5 GbE with TSN supported (i225)1x vPro supported</td></tr><tr><td>Serial Ports</td><td colspan="2">COM1/2: RS-232/422/485COM3/4: RS-232COM5/6: Header, Reserved</td></tr><tr><td>DI/O</td><td colspan="2">8-ch DI and 8-ch DO</td></tr><tr><td>USB</td><td colspan="2">4x USB 3.2 Gen2 + 2x USB 3.2 Gen1</td></tr><tr><td>Audio</td><td colspan="2">Line-out, Mic-in</td></tr><tr><td>M.2</td><td colspan="2">1x M.2 socket 1, Key E, 2230 (PCIe Gen3 x1)1x M.2 socket 2, Key B, 3052/3042 (PCIe Gen3 x1 / USB3)1x M.2 socket 3, Key M, NVMe, 2280 (PCIe Gen3 x4)</td></tr><tr><td>Micro SIM</td><td colspan="2">2</td></tr><tr><td>I2C</td><td colspan="2">2 (3.3V/5V)</td></tr><tr><td>TPM</td><td colspan="2">TPM 2.0</td></tr><tr><td colspan="3">Storage</td></tr><tr><td>2.5" SATA</td><td colspan="2">2 (3 total w/ optional kit)</td></tr><tr><td colspan="3">Physical</td></tr><tr><td>Dimensions</td><td colspan="2">210 (W) x 240 (D) x 165 (H) mm (8.27" x 9.45" x 6.5")</td></tr><tr><td>Weight</td><td colspan="2">5.01 kg (11.04 lbs)</td></tr><tr><td>Mounting</td><td colspan="2">Wall mountable</td></tr><tr><td colspan="3">Power Supply</td></tr><tr><td>DC Input</td><td colspan="2">9 to 32V</td></tr><tr><td>AC Input</td><td colspan="2">280W AC adapter (P/N: 31-62162-1010-A0)</td></tr><tr><td colspan="3">Environmental</td></tr><tr><td>Standard Operating Temperature</td><td colspan="2">0°C to 60°C, w/ airflow 0.6 m/s</td></tr><tr><td>Extended Operating Temperature</td><td colspan="2">-20°C to 60°C, w/ airflow 0.6 m/s(w/ industrial storage)</td></tr><tr><td>Storage Temperature</td><td colspan="2">-40°C to 85°C (excluding storage devices)</td></tr><tr><td>Humidity</td><td colspan="2">approx. 95% @ 40°C (non-condensing)</td></tr><tr><td>Vibration</td><td colspan="2">Operating: 5 Grms, 5-500 Hz, 3 axes (w/2.5" SSD)Operating: 0.5 Grms, 5-500 Hz, 3 axes (w/ HDD)</td></tr><tr><td>Shock</td><td colspan="2">Operating: 50 Grms, half sine 11ms duration (w/ 2.5" SSD)</td></tr><tr><td>ESD</td><td colspan="2">Contact +/-4kV, Air +/-8kV</td></tr><tr><td>EMC</td><td colspan="2">EN61000-6-4/-2, CE &amp; FCC Class A</td></tr><tr><td>Safety</td><td colspan="2">UL/cUL, CB, CCC</td></tr></table>

# 2.5 MVP-6200 Series Functional Block Diagram

![This flowchart illustrates the connectivity of a computer system board, centered around an Intel Processor and PCH.\n\n**Central Components:**\n*   **Processor Alder Lake S 35W/65W** (Top Center)\n*   **Intel PCH R680E** (Center)\n\n**Memory and Display (Top Left/Center):**\n*   **DDR5 SO-DIMM 1~4 2 DIMM - 3600** connects via **DDI**.\n*   The Processor connects to **HDMI LS PTN3360** via **DDI-B(RVP)** and **DDI-D(RVP)**. These connect to **HDMI 1.4** ports leading to **HDMI 1 CN** and **HDMI 2 CN**.\n*   The Processor connects to **DP1 CN** via **DDI-C(RVP)** and **DP2 CN** via **DDI-E(RVP)**.\n\n**Expansion Slots and Storage (Left Side):**\n*   **M.2 M-Key Conn. 2280 (NVMe/SATA)** connects via **PCIe gen3 x3** directly from the Processor and via **PCIe/SATA** through **MUX TMUXHS4212**.\n*   **M.2 B-Key Conn. 3042/3052 (5G module)** connects via **PCIe gen3** and **USB3.0/2.0** from the Processor. **Micro SIM Slot 1 & 2** connects to this block.\n*   **M.2 E-Key Conn. 2230 (WiFi/BT)** connects via **PCIe gen1** and **USB2.0** from the Processor.\n*   **2.5' storage x1** connects via **SATA x2** from the Processor.\n*   **USB DONGLE** connects via **USB2.0** from the Processor.\n*   **I2C Wafer x2** connects via **I2C** from the Processor.\n\n**Board-to-Board Connections (Top Right):**\n*   **BP conn A** (labeled **PCIe x16/SATA x3/USB3 x1**) connects via **PCIe x16(GEN5)** and **SATA x3 + USB x1** from the Processor.\n*   **BP conn B** (labeled **PCIe x4/PCIe x4/PCIe x1/USB2 x1**) connects via **PCIe gen3 x4 + PCIe gen3 x4** and **PCIe x16(GEN5)** from the Processor. A note indicates this is **'For ADLINK BP board'**.\n*   **USB3.2 Gen2 Type A x4** connects via **USB2.0 + USB3.2 Gen2**.\n*   **USB3.2 Gen1 Type A x2** connects via **USB2.0 + USB3.2 Gen1**.\n\n**Peripherals and I/O (Right Side):**\n*   **Intel i225-LM x3** connects via **PCIe x3** and **MDI** to **2.5G RJ45 x3**.\n*   **Audio codec TEMPO 92HD91 (W/A MP)** connects via **HDA Audio** and **Cable** to **Line-out/MIC** and **SPK out(option)**.\n*   **8DI/8DO Wafer** connects via **GPIO** to **DI/DO DB26**.\n*   **SUOER I/O NCT6126D** connects via **eSPI** to **FAN conn**.\n*   **DB40 conn** connects via **SPI** and splits into three UART paths:\n    *   **UART 5/6** -) **ADM213E** -) **Cable** -) **RS232 x2 (option)**.\n    *   **UART 1/2** -) **SP339EER** -) **Cable** -) **RS232/422/485 x2 (DB9 CN)**.\n    *   **UART 3/4** -) **ADM213E** -) **Cable** -) **RS232 x2 (DB9 CN)**.\n*   **TPM 2.0 SLB 9670** connects via **SPI**.\n*   **BUS SW 74CBLTV3257** connects via **SPI** to **BIOS ROM MX25L25673GM2**.\n\n**Other Blocks:**\n*   **DC 9-32V IN** (Bottom Left)\n*   **Internal port** and **External port** labels are present at the bottom left.](.mvp-6200-50m-41053-1000-10/c9ba9594d3f1893d4413c47301be67a92a38de8b5873974e61fdf7bd0a0174cd.jpg)

Figure 2-1: MVP-6200 Series Functional Block Diagram

# 2.6 Display Options

With computing and graphic performance enhancement from its 12th Generation Intel processors, the MVP-6200 Series controller can support four independent displays, with configurations as follows.

<table><tr><td></td><td>Port</td><td>Resolution</td></tr><tr><td>Display Option 1</td><td>DisplayPort1</td><td>4096x2304@60Hz</td></tr><tr><td>Display Option 2</td><td>DisplayPort2</td><td>4096x2304@60Hz</td></tr><tr><td>Display Option 3</td><td>HDMI1</td><td>3840x2160 @ 60Hz</td></tr><tr><td>Display Option 4</td><td>HDMI2</td><td>3840x2160 @ 60Hz</td></tr></table>

Table 2-1: Maximum Resolution Display Configurations

# 2.7 Mechanical

All dimensions in millimeters.

![Matrix\n225\n238\n179\n212.80\n239](.mvp-6200-50m-41053-1000-10/3d064dc327be5934dac9ab74743a3a7ff680a663826b794e63ebbaff0260097d.jpg)

![16.90\nR4\n5.20\n7.20\n15\nDetail A](.mvp-6200-50m-41053-1000-10/dc7210a9da5abb8eea310fd3839f9afea034d824325b2c39ad7463ce1662ffe1.jpg)

Figure 2-2: MVP-6200 Series Top View

![239\n212.80\n179\nADLINK\nGND ANT 1\n9-32 VDC\nV+ V-\nDP++ 1\nHDMI 1\nDP++ 2\nHDMI 2\nUSB 3\nCFast\nANT 6 COM 1 COM 2 COM 3 COM 4 DI/O\nU3 WD\nU2\nU1\n5\n+\n+\n+\n+\n+\n+\n+\n+\n+\n+\n+\n+\n+\n+\n+\n+\n+\n+\n+\n+\n+\n+\n+\n+\n+\n+\n+\n+\n-\n165 ± 0.50\n178\n191](.mvp-6200-50m-41053-1000-10/59d114561b2401ca8072b57e690052054fcb911e5a978362ddfd98e1333fe621.jpg)

Figure 2-3: MVP-6200 Series 2 Slot Front View

![33-04128-0060-XX · 6 PCS\nScrew M4,F-head(thin),L6,BZn,Nylok](.mvp-6200-50m-41053-1000-10/961f2bbe3f6998c245edb2b1c5ee8c4f141f02494ca1eee3268117edd7aa1069.jpg)

Rear Panel Mounting Bracket Orientation

![33-04128-0060-XX · 6 PCS\nScrew M4,F-head(thin),L6,BZn,Nylok](.mvp-6200-50m-41053-1000-10/269c080583ef20bf753b429588138b52f740ec0fd58929afce380111e8eabf95.jpg)

Bottom Panel Mounting Bracket Orientation
Figure 2-4: MVP-6200 Series 2 Slot Mounting

![239\n212.80\n179\nADLINK\nGND ANT 1\n9-32 VDC\nV+ V-\nHDMI 1\nDHMI 2\nANT 2\nDP++1\nDP++2\nUSB 3 GND\n1\n2\n3\nU3 WD\nU2\nU1\n5\n6\nUSB 3 GND\n4\nUSB 3 GND\nANT 3 ANT 5\nANT 6 COM 1 COM 2 COM 3 COM 4 DI/O\n206 ±0.50 219 232](.mvp-6200-50m-41053-1000-10/773fb9c54b68b285b90efe44e1f6e72080cb52d510115accd2116636e26b2a5c.jpg)

Figure 2-5: MVP-6200 Series 4 Slot Front View

![33-04128-0060-XX, 6 PCS\nScrew M4,F-head(thin),L6,BZn,Nylok](.mvp-6200-50m-41053-1000-10/3c098e552c2ba1ee2ffd870cc9676da83f91db3f198ba0d3308ffbf911350a7a.jpg)

Rear Panel Mounting Bracket Orientation

![33-04128-0060-XX, 6 PCS\nScrew M4,F-head(thin),L6,BZn,Nylok](.mvp-6200-50m-41053-1000-10/2834308889993de22d3768e6ecec2c4024437b58e519ba6ae289ab3392b9268b.jpg)

Bottom Panel Mounting Bracket Orientation
Figure 2-6: MVP-6200 Series 4 Slot Mounting

# 3 System Layout

# 3.1 Front/Side Panel I/O

The MVP-6200 Series provides the following front and side panel access features.

![A B C D B E F G B H B I\nGND ANT 1 ADLINK ANT 2 1 2 3 U3 WD\n9-32 VDC V+ DP++ 1 DP++ 2 1 2 3 U2\nHDMI 1 HDMI 2 USB 3 Gen2 USB 3 Gen2 USB 3 Gen1 U1\nN O\nANT 6 COM 1 COM 2 COM 3 COM 4 DI/O\nB J K L M](.mvp-6200-50m-41053-1000-10/b1721f6321a00bb8235edc4e2bf14b068bf9ae30c07f41ac05a54b1a634c5f9d.jpg)

Figure 3-1: Front Panel I/O

![ANT 4\nB](.mvp-6200-50m-41053-1000-10/ed80b395c1d3f9e35b7d8d7c0c4253fed76b7e948a5b796cded946c7e3de8d31.jpg)

Figure 3-2: Side Panel I/O

<table><tr><td>A</td><td>Ground</td><td>I</td><td>Reset Button</td></tr><tr><td>B</td><td>Antenna x6</td><td>J</td><td>COM Port x4</td></tr><tr><td>C</td><td>DC Power Input</td><td>K</td><td>USB 3.2 Gen 1 Type-A x2</td></tr><tr><td>D</td><td>DisplayPort++ x2</td><td>L</td><td>Digital Input/Output</td></tr><tr><td>E</td><td>Gigabit Ethernet x3</td><td>M</td><td>Audio (Line-in, Line-out)</td></tr><tr><td>F</td><td>LED Indicators</td><td>N</td><td>HDMI x2</td></tr><tr><td>G</td><td>External Power Button</td><td>O</td><td>USB 3.2 Gen 2 Type-A x4</td></tr><tr><td>H</td><td>Power Button</td><td colspan="2"></td></tr></table>

Table 3-1: Front/Side Panel I/O Legend

# 3.1.1 Antenna Ports

Antenna ports ANT1-4 support 5G (PN: 30-60192-0000-A0), while ports ANT5-6 support WiFi 2.4GHz/5GHz (PN: 30-60125-1000- B0).

# 3.1.2 Power Button

The power button is a non-latched push button with a blue LED indicator.

<table><tr><td>System Status</td><td>Power LED</td></tr><tr><td>System turn on</td><td>Light ON</td></tr><tr><td>Suspend (S3)</td><td>Blinking</td></tr><tr><td>Hybernation (S4)</td><td>Blinking</td></tr><tr><td>Power OFF (S5)</td><td>Light OFF</td></tr></table>

# 3.1.3 LED Indicators

In addition to the power button LED, six LEDs on the front panel indicate the following.

<table><tr><td>LED Indicator</td><td>Location</td><td>Color</td><td>Description</td></tr><tr><td>Watchdog (WD)</td><td>Top Right</td><td>Yellow</td><td>Indicates watchdog timer status. When watchdog timer starts, the LED will be on until system boot up success. When system does not boot up and the timer is expired, the system will automatically reboot.</td></tr><tr><td>Hard disk drive (HD)</td><td>Middle Right</td><td>Orange</td><td>When blinking, indicates the SATA HDD is active.</td></tr><tr><td>Diagnostic(DG)</td><td>Bottom Right</td><td>Green</td><td>If lit continuously, indicates no physical storage is connected. If blinking, indicates no memory is installed on either SO-DIMM socket.</td></tr><tr><td>User define (U1)</td><td>Top Left</td><td>Green</td><td>User define LED</td></tr><tr><td>User define (U2)</td><td>Middle Left</td><td>Green</td><td>User define LED</td></tr><tr><td>User define (U3)</td><td>Bottom Left</td><td>Green</td><td>User define LED</td></tr></table>

# 3.1.4 PCI Slot

The MVP-6200 provides one PCI slot for expansion on the backplane board. Based on the ITE IT8892E PCIe to PCI bridge, connection to the host system is achieved through a PCIe x1 Gen3 interface, supporting universal or 5V PCI 32-bit cards operating at 33MHz.

# 3.1.5 PCI Express x16 Slot

One PCI express x16 slot supports expansion with standard PCIe Gen4 cards and full PCI express x16 signals.

# 3.1.6 PCI Express x4 Slot

Two PCI Express x4 slots for the MVP-6240 Series supports expansion with standard PCIe Gen3 cards and full PCI express x4 signals.

# 3.1.7 Reset Button

The reset button executes a hard reset for the MVP-6200 Series.

# 3.1.8 External Power Button Connector

The MVP-6200 Series provides an external power button connector to remotely power on/off the platform.

![Architectural floor plan showing room layout with labeled section '1' (no text or symbols beyond label)](.mvp-6200-50m-41053-1000-10/7ce9f6df294723db25c5421a7b8358f37ad72887412ed7c0f8eb1d1719ce41c8.jpg)

Figure 3-3: External Power Button Connector

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>PWR_BTN-L</td></tr><tr><td>2</td><td>GND</td></tr></table>

Table 3-2: External Power Button Connector Pin Definition

# 3.1.9 Audio Jack (Line-in, Line-out)

The MVP-6200 Series provides two stereo audio ports (Line-in, Line-out). Audio is controlled by the TEMPO 92HD91 chip.

# 3.1.10 DisplayPort Connectors

Two DisplayPort connectors on the front panel can connect to VGA, DVI, HDMI and DisplayPort monitors via DisplayPort to VGA adapter cable, DisplayPort to DVI adapter cable, or DisplayPort to HDMI adapter cable and DisplayPort cable.

![19\n1\n20\n2](.mvp-6200-50m-41053-1000-10/a5c04fc2984cb7ba40eefbfe18c0d5f0ebb81e3a150bbf8c0a67130707c19702.jpg)

Figure 3-4: DisplayPort Connector Pin Definition

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>CN_DDPx0+</td><td>11</td><td>GND</td></tr><tr><td>2</td><td>GND</td><td>12</td><td>CN_DDPx3-</td></tr><tr><td>3</td><td>CN_DDPx0-</td><td>13</td><td>CN_DDPx_AUX_SEL</td></tr><tr><td>4</td><td>CN_DDPx1+</td><td>14</td><td>CN_DDPx_CONFIG2</td></tr><tr><td>5</td><td>GND</td><td>15</td><td>CN_DDPx_AUX+</td></tr><tr><td>6</td><td>CN_DDPx1-</td><td>16</td><td>GND</td></tr><tr><td>7</td><td>CN_DDPx2+</td><td>17</td><td>CN_DDPx_AUX-</td></tr><tr><td>8</td><td>GND</td><td>18</td><td>CN_DDPx_HPD</td></tr><tr><td>9</td><td>CN_DDPx2-</td><td>19</td><td>GND</td></tr><tr><td>10</td><td>CN_DDPx3+</td><td>20</td><td>+V3.3_DDPx_PWR_CN</td></tr></table>

Table 3-3: DisplayPort Pin Definition

# 3.1.11 Digital I/O Connector

The MVP-6200 Series provides 8 channels of non-isolation digital input and 8 channels of non-isolation digital output circuits, with spec and circuits as follows.

# 8-channel Digital Input

 VIH: 2 to 5.25V
 VIL: 0 to 0.8V

# 8-channel Digital Output

 Output type: Open drain N-channel
 MOSFET driver with internal pull high of 200Ω resistance.
 Source/Sink current for all channels: 24mA
 VOH: 2.4 to 5V
 VOL: 0 to 0.5V

![9\n1\n26\n19](.mvp-6200-50m-41053-1000-10/f6eed8a14ffafee18e5df61459dfad0793e0c1d2653eda51e3499abd79286642.jpg)

Figure 3-5: Digital I/O Connector Pin Definition

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>DI0</td><td>8</td><td>DI7</td><td>15</td><td>N/C</td><td>22</td><td>DO3</td></tr><tr><td>2</td><td>DI1</td><td>9</td><td>GND</td><td>16</td><td>N/C</td><td>23</td><td>DO4</td></tr><tr><td>3</td><td>DI2</td><td>10</td><td>N/C</td><td>17</td><td>N/C</td><td>24</td><td>DO5</td></tr><tr><td>4</td><td>DI3</td><td>11</td><td>N/C</td><td>18</td><td>GND</td><td>25</td><td>DO6</td></tr><tr><td>5</td><td>DI4</td><td>12</td><td>N/C</td><td>19</td><td>DO0</td><td>26</td><td>DO7</td></tr><tr><td>6</td><td>DI5</td><td>13</td><td>N/C</td><td>20</td><td>DO1</td><td></td><td></td></tr><tr><td>7</td><td>DI6</td><td>14</td><td>N/C</td><td>21</td><td>DO2</td><td></td><td></td></tr></table>

Table 3-4: Digital Input/Output Connector Pin Definition

![+3.3V\n2.2kΩ\nDI_IN\nDIn\n100kΩ\nG\nD\nMOS\nS\nDI_GND](.mvp-6200-50m-41053-1000-10/8273ce5f60db5969d0bcf991156c70f54ab4e3802909378e1b1e52dee2c9e90a.jpg)

Figure 3-6: Digital Input Circuit

![+3.3V\n+5.0V\n2.2kΩ\n200Ω\nDO_OUT\nD\nG\nS\nMOS\nDOn](.mvp-6200-50m-41053-1000-10/72012cda4602ce122d48e0fe4942878a01c3f37e7b189388aa750aeb5f66ddc3.jpg)

Figure 3-7: Digital Output Circuit

# 3.1.12 HDMI Connector

The MVP-6200 Series provides one HDMI connector for connection to an external monitor.

![19 17\n3 1\n18\n4 2](.mvp-6200-50m-41053-1000-10/c287e6ab724ca5ad782d06892bf876f7a25e53236fec75c79f98ba7f170a3098.jpg)

<table><tr><td>Pin #</td><td>Signal</td><td>Pin #</td><td>Signal</td></tr><tr><td>1</td><td>CON_HDMI_TX2_P</td><td>2</td><td>GND</td></tr><tr><td>3</td><td>CON_HDMI_TX2_N</td><td>4</td><td>CON_HDMI_TX1_P</td></tr><tr><td>5</td><td>GND</td><td>6</td><td>CON_HDMI_TX1_N</td></tr><tr><td>7</td><td>CON_HDMI_TX0_P</td><td>8</td><td>GND</td></tr><tr><td>9</td><td>CON_HDMI_TX0_N</td><td>10</td><td>CON_HDMI_CLK_P</td></tr><tr><td>11</td><td>GND</td><td>12</td><td>CON_HDMI_CLK_N</td></tr><tr><td>13</td><td>N/C</td><td>14</td><td>N/C</td></tr><tr><td>15</td><td>DVI_SCL_SINK</td><td>16</td><td>DVI_SDA_SINK</td></tr><tr><td>17</td><td>GND</td><td>18</td><td>P_+5V0_HDMI_CN</td></tr><tr><td>19</td><td>CON_HDMI_HPD_5V0</td><td colspan="2"></td></tr></table>

Table 3-5: HDMI Connector Pin Definition

# 3.1.13 USB 2.0 Ports

The MVP-6200 Series provides one USB 2.0 Type-A port. All USB ports are compatible with high-speed, full-speed and low-speed USB devices. The MVP-6200 Series supports multiple boot devices, including USB flash drives, USB external hard drives, USB floppy, USB CD-ROM and others. The boot priority and boot device can be configured in the BIOS.

# 3.1.14 USB 3.2 Ports

The MVP-6200 Series provides four USB 3.2 Gen 2 and two USB 3.2 Gen 1 ports supporting Type-A USB 3.2 connection on the front panel. All USB 3.2 ports are compatible with SuperSpeed Gen2, high-speed, full-speed, and low-speed USB devices. USB1 and USB2 Provide 1.6A current. USB3,4 share 1.6A current, USB5,6 share 1.6A current. The full 1.6A current is available if only one port is used.

# 3.1.15 Gigabit Ethernet Ports

Three Gigabit Ethernet ports on the front panel support Intel I225- LM supports 2.5Gps.

<table><tr><td>Speed LEDGreen/Orange</td><td>Active/LinkYellow</td></tr></table>

![8\n1](.mvp-6200-50m-41053-1000-10/4bcbff2a95fa0cc1993441d4bfb35ac5ad433b1a5732d77bcbb3be08d66a0d40.jpg)

Figure 3-8: Ethernet Port and LEDs

<table><tr><td>Pin #</td><td>10BASE-T/100BASE-TX</td><td>1000BASE-T</td></tr><tr><td>1</td><td>TX+</td><td>LAN_TX0+</td></tr><tr><td>2</td><td>TX-</td><td>LAN_TX0-</td></tr><tr><td>3</td><td>RX+</td><td>LAN_TX1+</td></tr><tr><td>4</td><td>—</td><td>LAN_TX2+</td></tr><tr><td>5</td><td>—</td><td>LAN_TX2-</td></tr><tr><td>6</td><td>RX-</td><td>LAN_TX1-</td></tr><tr><td>7</td><td>—</td><td>LAN_TX3+</td></tr><tr><td>8</td><td>—</td><td>LAN_TX3-</td></tr></table>

Table 3-6: Ethernet Port Pin Definition

<table><tr><td>LED Color</td><td>Status</td><td>Description</td></tr><tr><td rowspan="3">Yellow</td><td>OFF</td><td>Ethernet port is disconnected.</td></tr><tr><td>ON</td><td>Ethernet port is connected with no activity.</td></tr><tr><td>Flashing</td><td>Ethernet port is connected and active.</td></tr></table>

Table 3-7: Active/Link LED Indicators

<table><tr><td>LED Color</td><td>Status</td><td>Description</td></tr><tr><td rowspan="3">Green/Orange</td><td>OFF</td><td>10/100 Mbps</td></tr><tr><td>Green</td><td>1000 Mbps</td></tr><tr><td>Orange</td><td>2500 Mbps</td></tr></table>

Table 3-8: Speed LED Indicators

# 3.1.16 DC Power Input

![9-32 VDC\nV+ V-](.mvp-6200-50m-41053-1000-10/8a12e6a2f8d54b3f9afe74fa53594c75114f3a484190ca5864cb42d5d1fcb905.jpg)

Figure 3-9: DC Power Input

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>V+ (DC_IN)</td></tr><tr><td>2</td><td>V- (DGND)</td></tr></table>

Table 3-9: DC Power Input Pin Definition

Refer to Section 4.2: Attach DC Power Connector on page 39 to install the DC Power Connector to the DC Power Input.

Use an approved power source as certified by IEC or UL. If you need an adaptor, optional accessories or further assistance, contact ADLINK for further information. The maximum operational altitude is 2000 m with an output that meets LPS and SELV (ES1) circuits.

# Power Source Rating

<table><tr><td></td><td>Voltage</td><td>Current</td></tr><tr><td>DC Power Source</td><td>9 to 32V DC</td><td>30A to 8.75A min.</td></tr><tr><td>AC-to-DC Adapter</td><td>24V DC</td><td>11.67A min.</td></tr></table>

![The image displays a maroon triangular warning sign featuring a white exclamation point in its center. Directly below the triangle, the text 'WARNING:' is printed in black capital letters.](.mvp-6200-50m-41053-1000-10/91925b8575ceb78acf465c2a4fc4117ca01c08a53de28fd734d721935158a5a5.jpg)

Before providing DC power, ensure the voltage and polarity provided are compatible with the DC input. Improper input voltage and/or polarity can cause system damage.

AVERTISSEMENT: Avant de fournir de l'énergie DC à cet appareil, veuillez vous assurer que la tension et la polarité fournies sont compatibles avec l'entrée DC. Une tension d'entrée et/ou polarité incorrectes peuvent causer des dommages au système.

# 3.1.17 COM Port Connectors

The MVP-6200 Series provides four COM ports through D-sub 9- pin connectors. The COM1 & COM2 ports support RS-232/422/ 485 modes by BIOS setting, while COM3 and COM4 support only RS-232.

![1\n5\n6\n9](.mvp-6200-50m-41053-1000-10/2fbad05e2657cde60353b11472995bd8334a85550aca8f51a42cf76e618f35d7.jpg)

Figure 3-10: COM Port Pin Definition

<table><tr><td rowspan="2">Pin</td><td colspan="3">Signal Name</td></tr><tr><td>RS-232</td><td>RS-422</td><td>RS-485</td></tr><tr><td>1</td><td>DCD#</td><td>TXD422-</td><td>485DATA-</td></tr><tr><td>2</td><td>RXD</td><td>TXD422+</td><td>485DATA+</td></tr><tr><td>3</td><td>TXD</td><td>RXD422+</td><td>N/S</td></tr><tr><td>4</td><td>DTR#</td><td>RXD422-</td><td>N/S</td></tr><tr><td>5</td><td>GND</td><td>N/S</td><td>N/S</td></tr><tr><td>6</td><td>DSR#</td><td>N/S</td><td>N/S</td></tr><tr><td>7</td><td>RTS#</td><td>N/S</td><td>N/S</td></tr><tr><td>8</td><td>CTS#</td><td>N/S</td><td>N/S</td></tr><tr><td>9</td><td>RI#</td><td>N/S</td><td>N/S</td></tr></table>

Table 3-10: D-Sub 9-pin Signal Function of COM Ports

# 3.2 Internal I/O Connectors

# 3.2.1 Mainboard Top/Bottom Connector Locations

![A\nB\nC\nD\nE\nF\nG\nH\nI\nJ\nK\nL](.mvp-6200-50m-41053-1000-10/abb235dd7dc5daec44e166a15673db07422ed7bcd98087e316a0aca72acb766c.jpg)

Figure 3-11: Mainboard Top Connectors

<table><tr><td>A</td><td>Power FW Update Connector (Debug)</td></tr><tr><td>B</td><td>M.2 M Key</td></tr><tr><td>C</td><td>CPU Socket</td></tr><tr><td>D</td><td>DDR5 SO-DIMM1</td></tr><tr><td>E</td><td>DDR5 SO-DIMM3</td></tr><tr><td>F</td><td>Flash ROM Socket (Debug)</td></tr><tr><td>G</td><td>DCIN Connector</td></tr><tr><td>H</td><td>HDMI + DP</td></tr><tr><td>I</td><td>HDMI + DP</td></tr><tr><td>J</td><td>RJ45 + USB 3.0 x2</td></tr><tr><td>K</td><td>RJ45 + USB 3.0 x2</td></tr><tr><td>L</td><td>RJ45 + USB 3.0 x2</td></tr><tr><td>M</td><td>Extenal Power Connector</td></tr></table>

Table 3-11: Mainboard Top Connector Legend

![A\nB\nC\nD\nE\nF\nH\nG\nM N\nK\nL K\nJ\nP\nQ\nT R\nU\nV](.mvp-6200-50m-41053-1000-10/287da2a7f2102477180fca920906f714bb0ddc8f00d94bd22561862efee91269.jpg)

Figure 3-12: Mainboard Bottom Connectors

<table><tr><td>A</td><td>SATA connector for 2.5” SSD</td></tr><tr><td>B</td><td>USB 2.0 dongle</td></tr><tr><td>C</td><td>SATA connector for 2.5” SSD</td></tr><tr><td>D</td><td>PCIE GEN5 slot for BP Board</td></tr><tr><td>E</td><td>M.2 E Key</td></tr><tr><td>F</td><td>System Fan Connector</td></tr><tr><td>G</td><td>DDR5 SO-DIMM2</td></tr><tr><td>H</td><td>DDR5 SO-DIMM4</td></tr><tr><td>I</td><td>PCIE GEN4 + Power slot for BP Board</td></tr><tr><td>J</td><td>External Power Connector for AFM Board</td></tr><tr><td>K</td><td>I2C Wafer 2 (I2C1)</td></tr><tr><td>L</td><td>I2C Wafer 1 (I2C0)</td></tr><tr><td>M</td><td>SIM connector for M.2</td></tr><tr><td>N</td><td>SIM connector for M.2</td></tr><tr><td>O</td><td>RTC Barttery Connector</td></tr><tr><td>P</td><td>Wafer for Speaker Out</td></tr><tr><td>Q</td><td>M.2 B Key</td></tr><tr><td>R</td><td>B2B Connector For AFM Board</td></tr><tr><td>S</td><td>DB40 Connector (Debug)</td></tr><tr><td>T</td><td>Wafer for COM5, 6 + DIDO + MIC + HP</td></tr><tr><td>U</td><td>Wafer for COM1, 2, 3, 4</td></tr><tr><td>V</td><td>External Power Connector for BP Board</td></tr><tr><td>X</td><td>External Power/Reset button</td></tr></table>

Table 3-12: Mainboard Bottom Connector Legend

# 3.2.2 2-slot/4-slot Backplane Connector

The MVP-6200 Series supports a 2-slot or 4-slot backplane.

# 3.2.2.1 2-slot Backplane Card

![G\nA\nB\nC\nD\nE\nF\nCE FC\nADLINK\n3/N\nARX-6102-BP-251E1\n51-46930-0A10](.mvp-6200-50m-41053-1000-10/ce04c55842c34f497e682800a98efcbceaf643082b43c5480747197c3ca52be3.jpg)

Figure 3-13: 2-slot Backplane Card

<table><tr><td>A</td><td>USB 2.0 dongle connector</td></tr><tr><td>B</td><td>SATA power connector</td></tr><tr><td>C</td><td>SATA signal connector (CN6 no function)</td></tr><tr><td>D</td><td>PCI slot</td></tr><tr><td>E</td><td>PCI express x16 slot</td></tr><tr><td>F</td><td>Additional power for PCIe x 16 slot (12V)</td></tr><tr><td>G</td><td>Direct SATA connector</td></tr></table>

Table 3-13: 2-slot Backplane Card Legend

# 3.2.2.2 4-slot Backplane Card

![Electrical circuit board layout diagram with labeled components and connections](.mvp-6200-50m-41053-1000-10/ceb487d11f2134a85b468f52c9759722418fb3c922977a822cd9489d459a86c4.jpg)

Figure 3-14: 4-slot Backplane Card

<table><tr><td>A</td><td>USB Type-A connector</td></tr><tr><td>B</td><td>FAN connector</td></tr><tr><td>C</td><td>SATA power connector</td></tr><tr><td>D</td><td>SATA data connector (CN1 no function)</td></tr><tr><td>E</td><td>SATA connector</td></tr><tr><td>F</td><td>PCI connector</td></tr><tr><td>G</td><td>PCIE x4 connector</td></tr><tr><td>H</td><td>PCIE x16 connector</td></tr></table>

Table 3-14: 4-slot Backplane Card Legend

# 3.2.3 SATA Connector

The SATA connector supports transfer up to 6.0Gb/s (600MB/s).

![Pure electrical circuit lines without any symbols](.mvp-6200-50m-41053-1000-10/9dcc4943d24e0057fddff6f002d8fd767f4bc365301903b6c7b3f428861aa463.jpg)

Figure 3-15: SATA Connector

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>GND</td></tr><tr><td>2</td><td>TXP</td></tr><tr><td>3</td><td>TXN</td></tr><tr><td>4</td><td>GND</td></tr><tr><td>5</td><td>RXN</td></tr><tr><td>6</td><td>RXP</td></tr><tr><td>7</td><td>GND</td></tr></table>

Table 3-15: SATA Connector Pin Definition

# 3.2.4 USB 2.0 Connector

One USB 2.0 Type-A connector is provided on the mainboard for internal USB dongle, with another on the backplane board.

![Pure electrical connector diagram without any text or symbols](.mvp-6200-50m-41053-1000-10/25bd1f05f068a13f4fb789af80096454a55a4e87c5dc2a79d6c51d22deb899dc.jpg)

Figure 3-16: USB Port

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>Vcc</td></tr><tr><td>2</td><td>Data-</td></tr><tr><td>3</td><td>Data+</td></tr><tr><td>4</td><td>GND</td></tr></table>

Table 3-16: USB Port Pin Definition

# 3.2.5 12V Fan Connector

DC 12V fan module power supply is provided through the connector, to which the optional fan module connects when installed in the chassis.

![Simple diagram with four black squares arranged horizontally inside a rectangular frame, labeled '1' at the bottom (no text or symbols within the diagram itself)](.mvp-6200-50m-41053-1000-10/5b0630795e389418399f3a9ff523913846f6d47639c61b0a4cbd39ac177e1170.jpg)

Figure 3-17: 12V Fan Connector Pin Definition

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>FAN_GND</td></tr><tr><td>2</td><td>12V IN PWR</td></tr><tr><td>3</td><td>FAN TACH</td></tr><tr><td>4</td><td>FAN PWM</td></tr></table>

Table 3-17: 12V Fan Connector Pin Definition

# 3.2.6 External Power/Reset Header

An internal header is provided for the Power and Reset buttons.

![The image displays a black-and-white schematic diagram of a USB Type B connector. It features a thick, rectangular outer border. Inside the border, there are four vertical rectangular slots arranged in a horizontal row. The number '1' is visible in the upper left corner of the inner area.](.mvp-6200-50m-41053-1000-10/391d2970527e62f78cf1df68e2cfe74d3df1841b60be453ee76afa55fc72a012.jpg)
Figure 3-18: External Power/Reset Header Pin Definition

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>PWR_BTN-L</td></tr><tr><td>2</td><td>GND</td></tr><tr><td>3</td><td>GND</td></tr><tr><td>4</td><td>RESET_BTN-L</td></tr></table>

Table 3-18: External Power/Reset Header Pin Definition

# 3.2.7 I2C Connector

There are two I2C connectors supporting 3.3v or 5v.

![Pure electrical connector diagram without any text, numbers, or symbols](.mvp-6200-50m-41053-1000-10/3534417fa662850377ad90022827a70dccff375332652544937d34d6db2aca7c.jpg)

Figure 3-19: I2C Connector Pin Definition

<table><tr><td>Pin</td><td>Signal (I2C0)</td><td>Signal (I2C1)</td></tr><tr><td>1</td><td>P_+5V0_S</td><td>P_+5V0_S</td></tr><tr><td>2</td><td>P_+3V3_S</td><td>P_+3V3_S</td></tr><tr><td>3</td><td>PCH_I2C0_SDA_S</td><td>PCH_I2C1_SDA_S</td></tr><tr><td>4</td><td>PCH_I2C0_SCL_S</td><td>PCH_I2C1_SCL_S</td></tr><tr><td>5</td><td>I2C0_GPIO</td><td>I2C1_GPIO</td></tr><tr><td>6</td><td>GND</td><td>GND</td></tr></table>

Table 3-19: I2C Connector Pin Definition

# 3.2.8 Micro-SIM Slot

The Micro-SIM slot supports an M.2 B Key.

![(13,17)\n(13,80)\n(13,33)\n(0,65) (2X)\n(1,45) (2X)\n(1,00) (2X)\n(14,85) (2X)\n(15,35) (2X)](.mvp-6200-50m-41053-1000-10/65af4ba6d5df57b26ca00e70e9397c9636b0edcd210b92cf4f878b48257e022a.jpg)

Figure 3-20: Micro-SIM Slot

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>SIM PWR</td></tr><tr><td>2</td><td>REST#</td></tr><tr><td>3</td><td>CLK</td></tr><tr><td>4</td><td>GND</td></tr><tr><td>5</td><td>VPP</td></tr><tr><td>6</td><td>DATA</td></tr></table>

Table 3-20: Micro-SIM Slot Pin Definition

# 3.2.9 12V Power for Additional AFM MXM Carrier Board

One 12V power pin header provides additional AFM MXM carrier board power for an MXM card, if used.

![Pure electrical circuit lines without any symbols](.mvp-6200-50m-41053-1000-10/f81a6c16d2554ff8062fa3107c53f513ddd033fbaf6e2dd56a7fd0360740cb76.jpg)

Figure 3-21: 12V Power Pin Definition

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>P_+12V_B</td><td>3</td><td>GND</td></tr><tr><td>2</td><td>P_+12V_B</td><td>4</td><td>GND</td></tr></table>

Table 3-21: 12V Power Pin Definition

![The image displays a white document icon featuring horizontal lines to represent text. A large, red checkmark is superimposed over the document, indicating approval or verification.](.mvp-6200-50m-41053-1000-10/8f4bd73d020b799ec30114703fa55adc88dd17ebf26aff30d50f70b0251a3368.jpg)
NOTE:

For additional information regarding the AFM MXM Carrier Board, please contact your ADLINK representative.

This page intentionally left blank.

# 4 Getting Started

# 4.1 Package Contents

Before unpacking, check the shipping carton for any damage. If the shipping carton and/or contents are damaged, inform your dealer immediately. Retain the shipping carton and packing materials for inspection. Obtain authorization from your dealer before returning any product to ADLINK. Ensure that the following items are included in the package.

 MVP-6200 controller
 Accessory pack
 Screw pack for wall-mounting and SSD installation

# 4.2 Attach DC Power Connector

Locate the DC power connector shown below that is included in the Accessory Box. Insert it into the DC Power Input “A” shown in Figure 3-2 on page 17 and secure it to the chassis using the captive screws.

![Close-up of a green plastic electronic component with three pins (no text or symbols visible)](.mvp-6200-50m-41053-1000-10/761e48253aed957e4325220a190adc5e8357f84dede9ae39ab8ca6a7e23c5e5d.jpg)

Connect a DC power source as described in Section 3.1.16: DC Power Input on page 26 to the inputs of the DC power connector, making sure to use the correct input voltage andpolarity.

![The image displays a red triangular warning sign with a black border containing a black exclamation point in the center. Directly below the triangle is the text 'WARNING:' printed in black, uppercase letters.](.mvp-6200-50m-41053-1000-10/beb115f32ea23b24c6792cdfca5f809addee66d51f60e22570e13432650b7e61.jpg)

Before providing DC power, ensure the voltage and polarity provided are compatible with the DC input. Improper input voltage and/or polarity can be responsible for system damage.

AVERTISSEMENT: Avant de connecter à une source de courant continu, veuillez vous assurer de la polarité de la tension conformément à l'entrée CC du PC. Une tension et/ou une polarité incorrectes peuvent causer des dommages irréversibles sur le système.

# 4.3 Installing Components

# 4.3.1 Install a Solid-State Drive (SSD) (Option 1)

Follow these steps to install a solid-state drive (SSD).

![The image displays a white document icon with a folded top-left corner. Horizontal grey lines run across the lower portion of the page, simulating text. A large red checkmark is drawn diagonally over the document.](.mvp-6200-50m-41053-1000-10/1032e811551167be302e71210a28f74c03459184f6c9f01f734a39675e53581f.jpg)
NOTE:

This option supports the installation of SSDs with a thickness of 9.5mm only.

1. Remove the top cover after loosening the thumbscrew.

![Close-up of a black industrial electronic device with a red arrow pointing downward on its side (no text or symbols visible)](.mvp-6200-50m-41053-1000-10/0be95bfa47faeaf5441473c7331d3c57e549da480efb6eff1dda28c58849a78b.jpg)

2. Using a screwdriver, remove the 4 rear panel case screws.

![Close-up of a black electronic device panel with four red circular markers highlighting specific mounting points (no text or symbols visible)](.mvp-6200-50m-41053-1000-10/6406ac1d25bdabd73b04cefdaf488276e37ee00f1ebf8d1709f8c5771bd10b0c.jpg)

3. Remove the SSD tray.

![Interior view of a computer motherboard with a highlighted internal component and a red arrow indicating direction (no text or symbols visible)](.mvp-6200-50m-41053-1000-10/deefe4bcfad2c96a8fbca5ad5429fd4b3d1cd6eb8bd838aecad476d16f0c68ec.jpg)

4. Use the set of 8 included M3 screws to attach two 2.5" x 9.5mm SSD drives to the tray.

![SNC-30\nSNC-30\nSNC-30](.mvp-6200-50m-41053-1000-10/9236d6461bd6de0f8e8141cde9c14b2d25d3aa5a0557eb73352d574d0fd732d9.jpg)

![7.5x 34K-500\nRAM2-P\n7.5x 34K-500\n7.5x 34K-500](.mvp-6200-50m-41053-1000-10/f02538de02f069e8c745d7137f810a624718a264792178348a7c014c1dbd98cc.jpg)

5. Gently insert the drives into the SATA connectors on the board.

![SaaS\nSaaS\nH100\nDUALINK\nRoHS FEC\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL\nSERIAL](.mvp-6200-50m-41053-1000-10/83f35d4bf00ffa7351d19538aa5a706cfe3f74339e8a72095d054eb0a3aa369c.jpg)

6. Replace the top cover and return the thumbscrew.

# 4.3.2 Install a Solid-State Drive (SSD) (Option 2)

Follow these steps to install a solid-state drive (SSD).

![An icon depicting a white document with a folded top corner and faint horizontal lines, overlaid with a large red checkmark.](.mvp-6200-50m-41053-1000-10/4604f084bdd553e2216a015523f6058fe251ebad4045d91d5b93651e9cfdb443.jpg)
NOTE:

This option supports the installation of SSDs with a thickness up to 15mm.

1. Prepare the SSD assembly using the following parts.

![Metallic rectangular plate with four circular holes and four black mounting feet (no text or symbols visible)](.mvp-6200-50m-41053-1000-10/fba880bdeca8e642dd92b89ac095929d6da16342e8fa78219814f22aa18f0779.jpg)

1x Bracket

![Close-up of a metallic mechanical component with a small hole and threaded shaft (no visible text or symbols)](.mvp-6200-50m-41053-1000-10/85d3ba5be7701c514e60f052ebc3088cf34f1ce1fca89fa8ae00c0328df1572b.jpg)

8x Screws

![Two black and blue fiber optic cables with red, yellow, and white connectors (no text or symbols visible)](.mvp-6200-50m-41053-1000-10/03a9e25cbb9985dbb92f1a6da6d5b2e92dde18014c0bc2a9a2ff7936b4118add.jpg)

1x Short SATA Data/Power Cable

1x Long SATA Data/Power Cable

Attach up to 2 SSDs to the bracket with the supplied screws, and then attach the short and long SATA data/ power cables.

![Metallic electronic device with multiple connected cables and connectors (no visible text or symbols)](.mvp-6200-50m-41053-1000-10/0b7dce1195db7ce2c68390bb88feed03b149f839f462d2e6b7289917c99f99a4.jpg)

2. Remove the top cover after loosening the thumbscrew.

![Close-up of a black industrial electronic device with a red arrow pointing to its side panel (no visible text or symbols)](.mvp-6200-50m-41053-1000-10/ceb60e22e8224ce7530d8549393560db90d7267aaa36a8ade84ab01efbb2caf6.jpg)

3. Using a screwdriver, remove the 4 side panel case screws.

![Close-up of a black electronic component with four red circular markers highlighting specific points (no text or symbols visible)](.mvp-6200-50m-41053-1000-10/5ad67d4b1d411bd1b4af7e96f6ff05605d1ad458908b4484f1544e84762d0bf3.jpg)

4. Put the SSD assembly into the system and attach it to the case with the 4 side panel case screws.

![Close-up of a computer motherboard with visible circuit board and connectors (no text or symbols)](.mvp-6200-50m-41053-1000-10/3f7ac3aa0cc8245450ad41204d1a6d04528e8cc3a8829ca0bffc5f2dd08263ea.jpg)

5. Connect the SSD data/power cables to the board as shown.

![SATA /Pow\nSATA /Pow](.mvp-6200-50m-41053-1000-10/10ed264eba2016b5ea1a2d73978dfbea36b431867015261d4ad6727b67897695.jpg)

![Close-up of a green circuit board with multiple colored wires and connectors, no visible text or symbols](.mvp-6200-50m-41053-1000-10/b7fb193fa2631f38b96c8005a7def4258f40aa78a65a59a7a1d1c735af925859.jpg)

wer cable(long)

ver cable(short)

6. Replace the top cover and return the thumbscrew.

# 4.3.3 Install SODIMM Memory

Follow these steps to install SODIMM memory.

1. Remove the top cover after loosening the thumbscrew.

![Close-up of a black industrial electronic device with a red arrow pointing downward, no visible text or symbols](.mvp-6200-50m-41053-1000-10/69a8cf528912b795f353224cf6be3d4c3a45afdfa34e1f6abd455fea08f83bcb.jpg)

2. Attach the included thermal pads to the main board under the location of the SODIMM modules. Make sure the thermal pads DO NOT contact the connector pins. Install the SODIMM modules.

![Close-up of a green printed circuit board with two blue rectangular components and gold connectors (no visible text or symbols)](.mvp-6200-50m-41053-1000-10/5de2fbdee39893031a2cfc9d16ea3dda8102d9ebbc7bcccefba0a25555085f8d.jpg)

![Close-up of a green printed circuit board with multiple microcontroller modules and connectors (no visible text or symbols)](.mvp-6200-50m-41053-1000-10/6e7f074f9a50b0a0473cdd211ff8b79a289b69c4bed14c4d738f66d08de8aa1c.jpg)

3. Replace the top cover and return the thumbscrew.

# 4.3.4 Install Wi-Fi Module

Follow these steps to install a Wi-Fi module.

1. Remove the top cover after loosening the thumbscrew.

![Close-up of a black industrial electronic device with a red downward arrow pointing to its side panel (no text or symbols visible)](.mvp-6200-50m-41053-1000-10/b24317d21894d7bbff01ca04b4be092660845014af01de1ec1b6a26c15b604b2.jpg)

2. Install the Wi-Fi module and lock in place with the included M3 screw.

![Interior view of an electronic circuit board with visible components and a highlighted component (no readable text or symbols)](.mvp-6200-50m-41053-1000-10/cc1ee63a189c9f2698b9a5e320384d9f095623a4a4fe2e328cb1934e6651602a.jpg)

3. Replace the top cover and return the thumbscrew.

# 4.3.5 Install 5G Module

Follow these steps to install a 5G module.

1. Remove the top cover after loosening the thumbscrew.

![Close-up of a black industrial electronic device with a red arrow pointing downward, no visible text or symbols](.mvp-6200-50m-41053-1000-10/f86b083ce80f25f345fa05f1a59c224b447a77a26d2c9846c900186d41d3f2a4.jpg)

2. Attach the included M2.5 standoff screw to one of two locations on the main board, depending on the size of the module. Attach the thermal pad to the main board as shown.

![Close-up of a green printed circuit board with electronic components and connectors (no readable text or symbols)](.mvp-6200-50m-41053-1000-10/fc3e80b412c32dba6e02feb60ca830bfd040345e0b45571a4db420a6ed8c8b03.jpg)

3. Install the 5G module and secure it with the included M2 screw.

![Close-up of a green printed circuit board with electronic components and a metallic component, no readable text or symbols present.](.mvp-6200-50m-41053-1000-10/d855017acd98e5413c3633c3b12fd78d8ae2f94ee77f39a451bec282081e05a2.jpg)

4. Replace the top cover and return the thumbscrew.

# 4.3.6 Install Fan Kit

Follow these steps to install a fan kit.

1. Remove the top cover after loosening the thumbscrew.

![Close-up of a black industrial electronic device with a red arrow pointing downward, no visible text or symbols.](.mvp-6200-50m-41053-1000-10/accc7ec1d35501088431153c69730a1dcc36335343b1e499606b96c8db8561aa.jpg)

2. Connect the fan connector to the board first, and then fasten the fan assembly kit to the chassis.

![Close-up of a hand inserting a small electronic component into a computer motherboard (no visible text or symbols)](.mvp-6200-50m-41053-1000-10/c2e942f414c6b2069334a5a1626ad3fa54150d63bb65fc80b564ab9accfa5df2.jpg)

![Close-up of a black electronic device with red arrows pointing to its top panel, no visible text or symbols.](.mvp-6200-50m-41053-1000-10/2493173fc4a6800e4e0429ac641b7aec87a320f24305ec20dc7f4f3ac87e54b4.jpg)

3. Replace the top cover and return the thumbscrew.

# 4.4 Mounting the MVP-6200 Series

# 4.4.1 Install the Wall-mount Brackets (Rear Panel)

Follow these steps to install the wall-mount brackets on the rear panel.

1. Use the 6 M4 screws shipped with the controller to attach the 2 included wall mount brackets to the chassis as shown.

![Close-up of a black plastic electronic component with mounting holes and a perforated panel (no text or symbols visible)](.mvp-6200-50m-41053-1000-10/6092307e0b199d8620ac242aad05d1247374a36560cfdb17e20afe2efb2b3899.jpg)

![The image displays a digital icon of a white document with a folded top-right corner and faint horizontal lines running across it. A large, bold red checkmark is superimposed over the left side of the document.](.mvp-6200-50m-41053-1000-10/85bc55e3ad03612a35030362a0e9f6ff2dc9d3e148f7cdb3e2622a63fa0a000d.jpg)
NOTE:

See “Mechanical” on page 12 for dimensions on wall mounting hole placement.

# 4.4.2 Install the Wall-mount Brackets (Side Panel)

Follow these steps to install the wall-mount brackets on the side panel.

1. Use the 6 M4 screws shipped with the controller to attach the 2 included wall mount brackets to the chassis as shown.

![Close-up of a black metal electronic device casing with mounting holes and red circular annotations highlighting features (no text or symbols present)](.mvp-6200-50m-41053-1000-10/7851acb50ae338ddf4fd10ad64e428a14c2ab2f15f3a75002279baefe749de3e.jpg)

![The image displays a white document icon with a folded top-left corner and faint grey horizontal lines suggesting text. A large, red checkmark is superimposed over the center of the document.](.mvp-6200-50m-41053-1000-10/3a016dca43bbb002eb6c193d4a3bc86b421de45b5bd64cf6430c3af4ce956f15.jpg)
NOTE:

See “Mechanical” on page 12 for dimensions on wall mounting hole placement.

# 4.5 PCIe/PCI Board Clearance

The following diagrams show the PCIe/PCI board clearances when using the respective SSD types.

When SSD/HDDthickness≤9.5mm,L:200mm

WhenSSD/HDDthickness>9.5mm&≤15mm，L:195mm

![Standard height: 111.28mm(Max)](.mvp-6200-50m-41053-1000-10/763b56c10ee0b150a9b0496cc799444ce93cc3cd9df48d599b9e84137dd73114.jpg)

![Technical diagram of a mechanical assembly with colored components and a red arrow indicating a specific part (no text or symbols present)](.mvp-6200-50m-41053-1000-10/f776608b2507f23a2e8fe89d0f70d9fb6081a6607bae1b8ac0a15da7a8312b5e.jpg)

SSD/SSD thickness≤9.5mm

![Technical diagram of a mechanical assembly with colored components and alignment lines (no text or symbols)](.mvp-6200-50m-41053-1000-10/617f991d81fa9142753a5df794360e3e2f9d39df794adaf1a46bef5f2ba87f7d.jpg)

SSD/SSDthickness>9.5mm&≤15mm

# 4.6 Driver Installation

Download the drivers for your system from the product page at https://www.adlinktech.com/Products/Industrial\_PCs\_Fanless\_ Embedded\_PCs/IntegratedFanlessEmbeddedComputers/MVP-6200 Series\_Series.

This page intentionally left blank.

# Appendix A Power

![The image displays a white icon representing a sheet of paper with a folded top-left corner and horizontal lines. Overlaid on the paper is a large, bold red checkmark.](.mvp-6200-50m-41053-1000-10/d74c1ba903135f1cffc58210958dbbe868f4a70915b8ede265991840a0e89d0e.jpg)
NOTE:

Information in this Appendix is for power budget planning and design purposes only. Actual power consumption may differ based on final application.

# A.1 Power Consumption Reference

Power consumption as follows is based on lab data in which 24V DC is applied and current is measured by the DC power supply. The power consumption (W) is calculated as the product of applied voltage (V) and the current (A).

Platforms tested for this data have available external I/O interfaces and are attached to supported devices such as DP and HDMI monitors, keyboard/mouse, USB dummy load, COM loopback, with an internal hard disk drive installed.

Information is presented for reference only. Actual power consumption will vary with different attached devices and operating system.

<table><tr><td>System</td><td>Power Off</td><td>System Idle</td><td>Processor Full Load</td><td>System Full Load</td><td>Recommended Power Supply</td></tr><tr><td>MVP-6249Intel Core i9-12900E</td><td>3.7W</td><td>59.4W</td><td>101W</td><td>147W</td><td>280W</td></tr></table>

Table A-1: Power Consumption

![The image displays an icon of a white document with a folded top-right corner. Faint gray horizontal lines are visible on the page, suggesting text. A large, bold red checkmark is superimposed over the left side of the document, slanting upwards to the right.](.mvp-6200-50m-41053-1000-10/645bc556f805c4ff9fe6fa649b4bcb8458882443cf686a89eb97d92909014c44.jpg)
NOTE:

Sufficient power supply for the entire system is required to meet these specifications. At least 100W at 24V input is recommended.
Heat generated by add-on PCI/PCIe adapters affects thermal stability. Additional heat dissipation is required when the system operates at high temperatures or in harsh environments with add-on adapters.

This page intentionally left blank.

# Appendix B BIOS Setup

The Basic Input/Output System (BIOS) is a program that provides a basic level of communication between the processor and peripherals. In addition, the BIOS also contains codes for various advanced features applied to the MVP-6200. The BIOS Setup program includes menus for configuring settings and enabling features of the MVP-6200. Most users do not need to use the BIOS Setup program, as the MVP-6200 ships with default settings that work well for most configurations.

Enter BIOS Setup by selecting DEL when the system is powered on the POST (Power On Self Test) message is displayed.The MVP-6200 controller supports one-time Boot Menu allowing selection of boot device. Enter the Boot Menu by selecting F7 at POST.

![The image displays a white document icon with a folded top-right corner and faint horizontal lines, overlaid with a large, thick red checkmark.](.mvp-6200-50m-41053-1000-10/e4c49992fe820d27c6358f8c16a2f8638194f83cc69d855521e8e176292cdbe6.jpg)
NOTE:

 BIOS options listed are for reference only.
 Different configurations can affect BIOS behavior.
Displayed material may reflect only the BIOS version corresponding to initial release and may differ from that of the purchased motherboard.
 Users are welcome to download the latest BIOS version from our official website.

# B.1 Main

<table><tr><td colspan="3">Main Advanced Chipset Security Boot Save &amp; Exit MEBx</td></tr><tr><td>BIOS Information</td><td></td><td rowspan="11">Set the Date. Use Tab to switch between Date elements. Default Ranges: Year: 1998-9999 Months: 1-12 Days: Dependent on month Range of Years may vary.</td></tr><tr><td>BIOS Vendor</td><td>American Megatrends</td></tr><tr><td>BIOS Version</td><td>1.01.10</td></tr><tr><td>Build Date</td><td>02/06/2023</td></tr><tr><td>MRC Version</td><td>0.0.4.6</td></tr><tr><td>GOP Version</td><td>17.0.1077</td></tr><tr><td>ME FW Version</td><td>16.1.25.1885</td></tr><tr><td>System Information</td><td></td></tr><tr><td>Project Name</td><td>MVP-6200</td></tr><tr><td>CPU Board Version</td><td>A2</td></tr><tr><td>CPU Brand String</td><td>12th Gen Intel(R) Core(TM) i9-12900E</td></tr><tr><td>Stepping</td><td>C0</td><td rowspan="10">+: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F8: Previous Values F9: Optimized Defaults F10:Save &amp; Exit ESC: Exit</td></tr><tr><td>GT Info</td><td>0x4680</td></tr><tr><td>CPU Frequency</td><td>2.30GHz</td></tr><tr><td>Total Memory</td><td>16384 MB (DDR5)</td></tr><tr><td>Memory Frequency</td><td>3600 MHz</td></tr><tr><td>PCH SKU</td><td>R680E</td></tr><tr><td>Stepping</td><td>B1</td></tr><tr><td>System Date</td><td>[Tue 02/07/2023]</td></tr><tr><td>System Time</td><td>[17:27:55]</td></tr><tr><td>Access Level</td><td>Administrator</td></tr></table>

Contains basic system information for the MVP-6200.

![A vertical maroon triangle featuring a white exclamation point in the center sits above the word 'WARNING' in white capital letters.](.mvp-6200-50m-41053-1000-10/ead168157510d946928f226160a68254bce98eb2c3ab3394dfe37face0a89f8d.jpg)

Changing BIOS settings may lead to incorrect controller behavior and possible inability to boot.

# BIOS Information

Shows current system BIOS Vendor, BIOS Version, Build Date, MRC Version, GOP Version and ME FW Version.

# System Information

Shows current system Project Name, CPU Board Version, CPU Branding String, CPU Stepping, GT Info, CPU Frequency, Total Memory, Memory Frequency, PCH SKU and Stepping.

# System Time/System Date

Allows adjustment of system time and date, as follows.

1. Highlight System Time or System Date using the up and down &lt;Arrow&gt; keys.
2. Enter new values using the keyboard and select &lt;Enter&gt;.
3. Select &lt; Tab &gt; to move between fields.

![The image displays a square icon of a white document with a folded top-right corner and faint horizontal grey lines. A large, bold red checkmark is superimposed over the center of the document. The entire graphic is enclosed within a thin black square border.](.mvp-6200-50m-41053-1000-10/5b509d0a614705a0329810f708f433debf2652b280fc7bc1f78ebc6fd6991796.jpg)
NOTE:

The date must be entered in MM/DD/YY format, and the time in HH:MM:SS. The time is in 24-hour format. For example, 5:30 A.M. appears as 05:30:00, and 5:30 P.M. as 17:30:00.

# B.2 Advanced

<table><tr><td colspan="2">Aptio Setup - AMI</td></tr><tr><td colspan="2">Main Advanced Chipset Security Boot Save &amp; Exit MEBx</td></tr><tr><td>CPU Configuration
Power Management
Serial Console Redirection
USB Configuration
TPM 2.0 Configuration
Onboard Devices Configuration
NCT6126D Hardware Monitor
BIOS Watchdog Timer
Network Stack Configuration
Intel(R) Ethernet Controller (3) I225-IT - 00:30:64:84:D7:24
Intel(R) Ethernet Controller (3) I225-IT - 00:30:64:84:D7:25
Intel(R) Ethernet Controller (3) I225-IT - 00:30:64:84:D7:26</td><td>CPU Configuration</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10:Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

![The image displays a yellow triangular warning sign with a large black exclamation point in the center. Directly below the triangle, the text 'CAUTION:' is written in black capital letters.](.mvp-6200-50m-41053-1000-10/4562a35febe3960743240725d80b209db017598e7ad8bdb76c707ba0057aa95b.jpg)

Setting incorrect or conflicting values in Advanced BIOS Setup may cause system malfunction.

Accesses advanced options of the MVP-6200.

# B.2.1 CPU Configuration

![Advanced\nAptio Setup - AMI\nCPU Configuration\nCPU Brand String 12th Gen Intel(R)\nCore(TM) i9-12900E\nPackage Not Implemented Yet\nStepping CO\nNumber of Efficient-cores 8Core(s) / 8Thread(s)\nNumber of Performance-cores 8Core(s) / 16Thread(s)\nID 0x90672\nMicrocode Revision 23\nSpeed 2300 MHz\nL1 Data Cache 48 KB x 8\nL1 Instruction Cache 32 KB x 8\nL2 Cache 1280 KB x 8\nL3 Cache 30 MB\nVMX Supported\nSMX/TXT Supported\nHyper-Threading (Enabled)\nActive Performance-cores (All)\nActive Efficient-cores (All)\nIntel (VMX) Virtualization (Enabled)\nTechnology\nIntel Trusted Execution Technology (Disabled)\nIntel(R) SpeedStep(tm) (Disabled)\nEnable or Disable\nHyper-Threading Technology.\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10:Save & Exit\nESC: Exit\nVersion 2.22.1286 Copyright (C) 2023 AMI](.mvp-6200-50m-41053-1000-10/0826344ce859d5d34d0a6ab7a4804de60f4ff9d303bdaba5081d1448856f4b99.jpg)

# Hyper-Threading

Enabled for Windows and Linux (optimized for Hyper-Threading Technology) and Disabled for other OS (not optimized for Hyper-Threading Technology). When Disabled only one thread per enabled core is enabled.

# Active Performance-cores

Number of P-cores to enable in each processor package. Note: Number of Cores and E-cores are looked at together. When both are {0,0}, Pcode will enable all cores.

# Active Efficient-cores

Number of E-cores to enable in each processor package. Note: Number of Cores and E-cores are looked at together. When both are {0,0}, Pcode will enable all cores.

# Intel (VMX) Virtualization Technology

When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology.

# Intel Trusted Execution Technology

Enables utilization of additional hardware capabilities provided by Intel(R) Trusted Execution Technology. Changes require a full power cycle to take effect.

# Intel® SpeedStep™

Allows more than two frequency ranges to be supported.

# Intel® Speed Shift Technology

Enables/disables Intel® Speed Shift Technology support. Enabling will expose the CPPC v2 interface to allow hardware controlled Pstates.

# C States

Enable/Disable CPU Power Management. Allows CPU to go to C states when it is not 100% utilized.

# TCC Activation Offset

Offset from factory set TCC activation temperature at which the Thermal Control Circuit must be activated. TCC will be activated at: TCC Activation Temp - TCC Activation Offset. TCC Activation Offset range is 0 to 63.

# B.2.2 Power Management

<table><tr><td colspan="2">Advanced Aptio Setup - AMI</td></tr><tr><td rowspan="2">Power Management
State After G3 [Last State]
RTC Wake system from S5 [Disabled]
PCIe Wake [Enabled]</td><td>Specify what state to go to when power is re-applied after a power failure (G3 state).</td></tr><tr><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10:Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

# State After G3

Specifies the state to go to when power is re-applied after a power failure (G3 state).

# RTC Wake system from S5

Enable or disable System wake on alarm event. Select FixedTime for the system to wake at the hr::min::sec specified. Select DynamicTime for the system to wake at the current time + Increase minute(s).

# PCIe Wake

Enables/disables PCI Express wake capability.

# B.2.3 Serial Console Redirection

![Advanced\nSerial Console Redirection\nCOM1\nConsole Redirection (Disabled)\n► Console Redirection Settings\nConsole Redirection Enable or\nDisable.\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10:Save & Exit\nESC: Exit\nVersion 2.22.1286 Copyright (C) 2023 AMI](.mvp-6200-50m-41053-1000-10/36d2ac39d7fbf0e93f7189ad9251c4d3a0af91de7c038bf41bde66d2607673ad.jpg)

# COM1

# Console Redirection

Enables/disables SIO COM1 Console Redirection.

# Console Redirection Settings

Specify how the host computer and the remote computer (in use) exchange data. Both computers should have the same or compatible settings.

# B.2.4 USB Configuration

<table><tr><td colspan="2">Advanced Aptio Setup - AMI</td></tr><tr><td>USB Configuration
USB Module Version 28
USB Controllers:
1 XHCI
USB Devices:
1 Drive, 1 Keyboard, 1 Mouse
USB Mass Storage Driver Support [Enabled]</td><td>Enable/Disable USB Mass
Storage Driver Support.</td></tr><tr><td>USB hardware delays and time-outs:
USB transfer time-out [20 sec]
Device reset time-out [20 sec]
Device power-up delay [Auto]</td><td rowspan="2">+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10:Save &amp; Exit
ESC: Exit</td></tr><tr><td>Mass Storage Devices:
SanDisk [Auto]</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

# USB Mass Storage Driver Support

Enables/disables USB mass storage driver support.

# USB transfer time-out

The time-out value for Control, Bulk, and Interrupt transfers.

# Device reset time-out

USB mass storage device Start Unit command time-out.

# Device power-up delay

Maximum time the device will take before it properly reports itself to the Host Controller, where Auto uses default value for Root port 100ms, and for Hub port the delay is taken from Hub descriptor.

# B.2.5 TPM 2.0 Configuration

<table><tr><td colspan="2">Aptio Setup - AMI</td></tr><tr><td>TPM 2.0 Configuration
TPM 2.0 Device Found
Firmware Version: 7.85
Vendor: IFX
Security Device Support [Enable]
Active PCR banks SHA256
Available PCR banks SHA256
SHA256 PCR Bank [Enabled]
Pending operation [None]
Platform Hierarchy [Enabled]
Storage Hierarchy [Enabled]
Endorsement Hierarchy [Enabled]
Physical Presence Spec Version [1.3]
TPM 2.0 InterfaceType [TIS]
PH Randomization [Enabled]</td><td>Enables or Disables BIOS support for security device.
O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available.
+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10:Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

# Security Device Support

Enables/disables BIOS support for security device. OS will not show Security Device. TCG EFI protocol and INT1A interface will not be available.

# SHA256 PCR Bank

Enables/disables SHA256 PCR Bank.

# Pending Operation

Schedules Operation for the Security Device. Computer will reboot during restart in order to change State of Security Device.

# Platform Hierarchy

Enables/disables Platform Hierarchy.

# Storage Hierarchy

Enables/disables Storage Hierarchy.

# Endorsement Hierarchy

Enables/disables Endorsement Hierarchy.

# Physical Presence Spec Version

Directs OS to support PPI Spec Version 1.2 or 1.3. Some HCK tests may not support 1.3.

# TPM 2.0 Interface Type

Select the Communication Interface to TPM 20 Device.

# PH Randomization

Enables or Disables Platform Hierarchy randomization. DO NOT ENABLE THIS QUESTION IN PRODUCTION PLATFORMS. THIS IS FOR DEVELOPMENT TESTING. OVERRIDE Change-PlatformAuth ELINK for production platforms supporting TXT.

# B.2.6 Onboard Devices Configuration

<table><tr><td>Onboard Devices Configuration Serial Port Configuration COM1 Mode Control [RS232] COM1 Device Settings IO=3F8h; IRQ=4; COM2 Mode Control [RS232] COM2 Device Settings IO=2F8h; IRQ=3; COM3 Device Settings IO=3E8h; IRQ=7; COM4 Device Settings IO=2E8h; IRQ=7; COM5 Device Settings IO=2F0h; IRQ=7; COM6 Device Settings IO=2E0h; IRQ=7; Lan Port Configuration LAN #1 [Enabled] LAN #2 [Enabled] LAN #3 [Enabled]</td><td>Select COM1 mode. RS232, RS422, RS485</td></tr><tr><td></td><td>+: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F8: Previous Values F9: Optimized Defaults F10:Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

# COM1 Mode Control

Selects COM1 mode from RS232, RS422 or RS485.

# COM2 Mode Control

Selects COM2 mode from RS232, RS422 or RS485.

# LAN #1 (Intel I225)

Enables/disables I225 LAN1.

# LAN #2 (Intel I225)

Enables/disables I225 LAN2.

# LAN #3 (Intel I225)

Enables/disables I225 LAN3.

# B.2.7 NCT6126D HW Monitor

<table><tr><td>Advanced</td><td colspan="2">Aptio Setup - AMI</td></tr><tr><td colspan="2">NCT6126D Hardware Monitor CPU temperature : +57 % Board temperature : +36 % System Fan Speed : 1075 RPM Backplane Fan Speed : 1121 RPM System Fan Control Mode [Auto Mode] VCORE : +0.872 V +12V_A : +12.096 V +5V0_S : +5.005 V +1V8_A : +1.824 V +3V3_SIO_AVSB : +3.344 V +3V3_VBAT_SIO : +3.056 V</td><td>Configure Fan Control Mode. Select Maunal Mode, user can configure a fix fan duty. Select SMART FAN IV, user can configure 4 temperatures and 4 fan duties. Select Auto Mode, FAN will run at automatic speed with thermal. ++: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F8: Previous Values F9: Optimized Defaults F10:Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="3">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

Displays CPU/Board Temperatures, System/Backplane fan speeds, and various Voltages.

# System Fan Control Mode

Configures fan control mode from Manual Mode, Auto Mode, and SMART FAN IV.

Manual Mode

<table><tr><td>Advanced</td><td colspan="2">Aptio Setup - AMI</td></tr><tr><td rowspan="22" colspan="2">NCT6126D Hardware MonitorCPU temperature : +52 °Board temperature : +33 °System Fan Speed : 1145 RPMBackplane Fan Speed : 1125 RPMSystem Fan Control Mode [Manual mode]Duty Cycle 128VCORE : +0.880 V+12V_A : +12.096 V+5V0_S : +5.005 V+1V8_A : +1.824 V+3V3_SIO_AVSB : +3.360 V+3V3_VBAT_SIO : +3.056 V</td><td rowspan="21">Configure Fan Control Mode.Select Maunal Mode, user canconfigure a fix fan duty.Select SMART FAN IV, user canconfigure 4 temperatures and 4fan duties. Select Auto Mode,FAN will run at automaticspeed with thermal.+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF8: Previous ValuesF9: Optimized DefaultsF10:Save &amp; ExitESC: Exit</td></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr><td></td></tr></table>

Allows configuration of a set fan duty cycle.

# Auto Mode

Fan runs at automatic speed for optimal thermal solution.

<table><tr><td>Advanced</td><td colspan="2">Aptio Setup - AMI</td></tr><tr><td rowspan="22" colspan="2">NCT6126D Hardware MonitorCPU temperature : +57 %Board temperature : +36 %System Fan Speed : 1075 RPMBackplane Fan Speed : 1121 RPMSystem Fan Control Mode [Auto Mode]VCORE : +0.872 V+12V_A : +12.096 V+5V0_S : +5.005 V+1V8_A : +1.824 V+3V3_SIO_AVSB : +3.344 V+3V3_VBAT_SIO : +3.056 V</td><td rowspan="21">Configure Fan Control Mode.Select Maunal Mode, user canconfigure a fix fan duty.Select SMART FAN IV, user canconfigure 4 temperatures and 4fan duties. Select Auto Mode,FAN will run at automaticspeed with thermal.++: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF8: Previous ValuesF9: Optimized DefaultsF10:Save &amp; ExitESC: Exit</td></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr><td></td></tr></table>

# SMART FAN IV

Four temperatures and four fan duties can be user-configured.

<table><tr><td colspan="2">NCT6126D Hardware Monitor</td></tr><tr><td colspan="2">CPU temperature : +53 %Board temperature : +33 %System Fan Speed : 1125 RPMBackplane Fan Speed : 1120 RPMSystem Fan Control Mode [SMART FAN IV]</td></tr><tr><td>Temperature 1</td><td>44</td></tr><tr><td>FAN Duty 1</td><td>77</td></tr><tr><td>Temperature 2</td><td>49</td></tr><tr><td>FAN Duty 2</td><td>103</td></tr><tr><td>Temperature 3</td><td>54</td></tr><tr><td>FAN Duty 3</td><td>154</td></tr><tr><td>Temperature 4</td><td>59</td></tr><tr><td>FAN Duty 4</td><td>205</td></tr><tr><td>Critical temperature</td><td>63</td></tr><tr><td colspan="2">VCORE : +0.880 V+12V_A : +12.096 V+5V0_S : +5.005 V</td></tr></table>

Version 2.22.1286 Copyright (C) 2023 AMI

# B.2.8 BIOS Watchdog Timer

![Advanced\nBIO Watchdog Timer\nBIOS POST Watchdog (Disabled)\n1. Disable: Disable WatchDog\nTimer; 2. Second Mode: Enable\nWatchdog Timer in second mode;\n3. Minute Mode: Enable\nWatchdog Timer in minute mode.\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10:Save & Exit\nESC: Exit\nVersion 2.22.1286 Copyright (C) 2023 AMI](.mvp-6200-50m-41053-1000-10/1ace8c832657f8a8f667c64cbc4c0ff56c313382ef25c46efa485f70fd1fd1ce.jpg)

# BIOS POST Watchdog

Disable disables WatchDog Timer, Second Mode enables Watchdog Timer in second mode, Minute Mode enables Watchdog Timer in minute mode.

# B.2.9 Network Stack Configuration

![Advanced\nAptio Setup - AMI\nNetwork Stack (Disabled)\nEnable/Disable UEFI Network Stack\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10:Save & Exit\nESC: Exit\nVersion 2.22.1286 Copyright (C) 2023 AMI](.mvp-6200-50m-41053-1000-10/f5708440381ca8242916c2e375e8e45e0082f899182470e8afcbd555a7827350.jpg)

# Network Stack

Enables/disables UEFI Network Stack.

# B.2.10 Intel® Ethernet Controller (3) I225-IT

<table><tr><td>Advanced</td><td>Aptio Setup - AMI</td><td></td></tr><tr><td>UEFI Driver Device Name Link Status MAC Address</td><td>Intel(R) 2.5G Ethernet Controller 0.10.04 Intel(R) Ethernet Controller (3) I225-IT [Disconnected] 00:30:64:84:D7:24</td><td>+: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F8: Previous Values F9: Optimized Defaults F10:Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="3">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

Displays UEFI Driver, Device Name, Link Status and MAC Address.

# B.3 Chipset

<table><tr><td colspan="2">Main Advanced Chipset Security Boot Save &amp; Exit MEBx</td></tr><tr><td>System Agent (SA) Configuration
PCH-IO Configuration
BackPlane PCIe Configuration
PCH digital I/O device [Disabled]</td><td>System Agent (SA) Parameters</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10:Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

![The image displays a warning sign consisting of a dark red triangle containing a white exclamation point, positioned directly above the word 'WARNING' written in black, uppercase letters.](.mvp-6200-50m-41053-1000-10/242f0559cf37c0c9cc198fd7ad983fb5ef99efda12d71e737adb577390de21ef.jpg)

Setting incorrect or conflicting values in Chipset BIOS Setup may cause system malfunction.

# B.3.1 System Agent (SA) Configuration

![Aptio Setup - AMI\nChipset\nSystem Agent (SA) Configuration\nVT-d                    Supported\n► Memory Configuration\n► Graphics Configuration\n► DMI/DPI Configuration\nVT-d                    (Enabled)\nMemory Configuration Parameters\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10:Save & Exit\nESC: Exit\nVersion 2.22.1286 Copyright (C) 2023 AMI](.mvp-6200-50m-41053-1000-10/28f6412b8554a70b9a9fea062ffd80fcfbb54e0cca5fd51236ef33121e576464.jpg)

# System Agent (SA) Configuration

Displays and configures VT-d capability and provides settings for Memory, Graphics, and DMI/OPI configuration.

# B.3.1.1 Memory Configuration

<table><tr><td colspan="2">Chipset Aptio Setup - AMI</td></tr><tr><td>Memory Configuration</td><td></td></tr><tr><td>Memory RC Version 0.0.4.6
Memory Frequency 3600 MHz
tCL-tRCD-tRP-tRAS 30-29-29-58
MC 0 Ch 0 DIMM 0 Not Populated / Disabled
MC 0 Ch 0 DIMM 1 Not Populated / Disabled
MC 1 Ch 0 DIMM 0 Populated &amp; Enabled
Size 16384 MB (DDR5)
Number of Ranks 1
Manufacturer Transcend
MC 1 Ch 0 DIMM 1 Not Populated / Disabled</td><td></td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10:Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

# Memory Configuration

Displays memory speed, size, maker, and configuration.

# B.3.1.2 Graphics Configuration

<table><tr><td colspan="2">Chipset Aptio Setup - AMI</td></tr><tr><td>Graphics Configuration
Primary Display [IGFX]
Internal Graphics [Enabled]
GTT Size [8MB]
Aperture Size [256MB]
DVMT Pre-Allocated [32M]</td><td>Select which of IGFX/PEG/PCI Graphics device should be Primary Display Or select HG for Hybrid GFX.</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

# Primary Display

Select which of IGFX/PEG/PCI Graphics device should be the Primary Display.

# Internal Graphics

Keeps IGFX enabled based on Setup options.

# GTT Size

Selects GTT Size.

# Aperture Size

Selects Aperture Size.

# DVMT Pre-Allocated

Selects DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphics Device.

# B.3.1.3 DMI/OPI Configuration

![Aptio Setup - AMI\nChipset\nDMI/DPI Configuration\nDMI X8 Gen4\nDMI Max Link Speed (Gen4)\nSet DMI Speed Gen1/Gen2/Gen3\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10:Save & Exit\nESC: Exit\nVersion 2.22.1286 Copyright (C) 2023 AMI](.mvp-6200-50m-41053-1000-10/ff72ec4fa4866562aa4ac5feb7e2e00fb046ebc1742fafa768bb56a4630c6002.jpg)

# DMI/OPI Configuration

Displays DMI link speed and width.

# DMI Max Link Speed

Sets DMI Speed to Gen1/Gen2/Gen3/Gen4.

# B.3.2 PCH-IO Configuration

![Aptio Setup - AMI\nChipset\nPCH-IO Configuration\n► SATA Configuration\n► NVMe Configuration\n► VMD setup menu\n► Security Configuration\nSATA Device Options Settings\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10:Save & Exit\nESC: Exit\nVersion 2.22.1286 Copyright (C) 2023 AMI](.mvp-6200-50m-41053-1000-10/a223800f637d0bc52eeca4c7beb6efcfff29ccaf939e59305984178e9432e7f7.jpg)

# PCH-IO Configuration

Configures SATA, NVMe, VMD, and Secruity.

# B.3.2.1 SATA Configuration

<table><tr><td>Chipset</td><td colspan="2">Aptio Setup - AMI</td></tr><tr><td>SATA Configuration</td><td></td><td rowspan="9">Determines how SATA controller(s) operate.</td></tr><tr><td>SATA Mode Selection</td><td>[AHCI]</td></tr><tr><td>SATA Controller Speed</td><td>[Gen3]</td></tr><tr><td>SATA HDD 0</td><td>Empty</td></tr><tr><td>SATA HDD 0</td><td>[Enabled]</td></tr><tr><td>SATA HDD 1</td><td>Empty</td></tr><tr><td>SATA HDD 1</td><td>[Enabled]</td></tr><tr><td>SATA HDD 2</td><td>Empty</td></tr><tr><td>SATA HDD 2</td><td>[Enabled]</td></tr><tr><td>M.2 SATA</td><td>Empty</td><td rowspan="2">+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr><tr><td>M.2 SATA</td><td>[Enabled]</td></tr></table>

# SATA Mode Selection

Determines how SATA controller(s) operate.

# SATA Controller Speed

Sets maximum speed the SATA controller can support.

# SATA HDD 0

Enables/disables SATA HDD 0.

# SATA HDD 1

Enables/disables SATA HDD 1.

# SATA HDD 2

Enables/disables SATA HDD 2.

# M.2 SATA

Enables/disables M.2 SATA.

# B.3.2.2 NVMe Configuration

<table><tr><td colspan="2">Chipset</td></tr><tr><td>NVMe Configuration
No NVME Device Found</td><td></td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10:Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

Displays NVMe device status.

# B.3.2.3 VMD Setup Menu

<table><tr><td colspan="2">Chipset Aptio Setup - AMI</td></tr><tr><td>VMD Configuration Enable VMD controller [Enabled] Enable VMD Global Mapping [Enabled] Map this Root Port under VMD [Enabled] Root Port BDF details SATA Controller RAID0 [Enabled] RAID1 [Enabled] RAID5 [Enabled] RAID10 [Enabled] Intel Rapid Recovery Technology [Enabled] RRT volumes can span internal and eSATA drives [Enabled] Intel(R) Optane(TM) Memory [Enabled]</td><td>Enable/Disable System Acceleration with Intel(R) Optane(TM) Memory feature. +: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F8: Previous Values F9: Optimized Defaults F10:Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

# Enable VMD controller

Enable/Disable VMD controller.

# Enable VMD Global Mapping

Enable/Disable VMD Global Mapping.

# RAID0

Enable/Disable RAID0 support.

# RAID1

Enable/Disable RAID1 support.

# RAID5

Enable/Disable RAID5 support.

# RAID10

Enable/Disable RAID10 support.

# Intel Rapid Recovery Technology

Enable/Disable Intel Rapid Recovery Technology.

# RRT volumes can span internal and eSATA drives

Enable/Disable RRT volumes can span internal and eSATA drives.

# Intel® Optane™ Memory

Enable/Disable System Acceleration with Intel® Optane™ Memory feature.

# B.3.2.4 Security Configuration

![Chipset\nAptio Setup - AMI\nSecurity Configuration\nBIOS Lock (Enabled)\nEnable/Disable the PCH BIOS\nLock Enable feature. Required\nto be enabled to ensure SMM\nprotection of flash.\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10:Save & Exit\nESC: Exit\nVersion 2.22.1286 Copyright (C) 2023 AMI](.mvp-6200-50m-41053-1000-10/935a0cc8fdd100f557f0b44e7ec7a5fd8d7b7dbaf778953f07ffb977f84e3400.jpg)

# BIOS Lock

Enables/disables PCH BIOS Lock Enable. Required to be enabled to ensure SMM flash protection.

# B.3.3 BackPlane PCIe Configuration

![Aptio Setup - AMI\nChipset\nBackPlane PCIe Configuration\nBackPlane	ABX-62ADL-BP-4SG5E4\nBP PEG #1	x16 Gen3\nPCIe Speed	(Auto)\nMax. detection time	100\nMin. time PERST active	20\nMax. time PERST deactive	200\nBP PCH PCIe x4 #1	Not Present\nPCIe Speed	(Auto)\nMax. detection time	100\nMin. time PERST active	20\nMax. time PERST deactive	200\nBP PCH PCIe x4 #2	Not Present\nPCIe Speed	(Auto)\nMax. detection time	100\nMin. time PERST active	20\nMax. time PERST deactive	200\nBP PCH PCIe/PCI x1	x1 Gen1\nPCIe Speed	(Auto)\nMax. detection time	100\nConfiguration PCIe Speed\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10:Save & Exit\nESC: Exit\nVersion 2.22.1286 Copyright (C) 2023 AMI](.mvp-6200-50m-41053-1000-10/ed6dec4bf09ee441b2d933bbef3962f54d519381f3950ecdee5dbc30e865294f.jpg)

Displays BackPlane model name, slot information, speed control, and time tunings.

# B.3.4 PCH digital I/O device

Disable/Enable ACPI GPIO Device support for PCH digital I/O and user LED.

# B.4 Security

<table><tr><td colspan="2">Aptio Setup - AMI
Main Advanced Chipset Security Boot Save &amp; Exit MEBx</td></tr><tr><td>Password Description
If ONLY the Administrator&#x27;s password is set, then this only limits access to Setup and is only asked for when entering Setup.
If ONLY the User&#x27;s password is set, then this is a power on password and must be entered to boot or enter Setup. In Setup the User will have Administrator rights.
The password length must be in the following range:
Minimum length 3
Maximum length 20
Administrator Password
User Password
Secure Boot menu</td><td>Set Administrator Password
+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10:Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

If only the Administrator password is set, access is limited and the password requested on Setup. If User password is set, it acts as a power-on password and must be entered to boot or enter setup.

# Administrator Password

Sets Administrator Password.

# User Password

Sets User Password.

# Secure Boot Menu

Configures Secure Boot.

# B.4.1 Secure Boot Menu

<table><tr><td colspan="2">Security Aptio Setup - AMI</td></tr><tr><td rowspan="2">Secure Boot System Mode User Secure Boot Not Active Vendor Keys Valid Secure Boot Control [Disabled] Secure Boot Mode [Standard] Key Management</td><td>Secure Boot feature is Active if Secure Boot is Enabled, Platform Key(PK) is enrolled and the System is in User mode. The mode change requires platform reset</td></tr><tr><td>+: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F8: Previous Values F9: Optimized Defaults F10:Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

# Secure Boot Control

Active if Secure Boot is Enabled, Platform Key (PK) is enrolled and the System is in User mode. Mode change requires platform reset.

# Secure Boot Mode

Selects from Standard or Custom. In Custom, Secure Boot Policy variables can be configured by a physically present user without full authentication.

# Key Management

Enables expert users to modify Secure Boot Policy variables without full authentication.

# B.5 Boot

<table><tr><td colspan="2">Aptio Setup - AMI</td></tr><tr><td colspan="2">Main Advanced Chipset Security Boot Save &amp; Exit MEBx</td></tr><tr><td>Boot Configuration
Setup Prompt Timeout 1
Bootup NumLock State [Off]
Quiet Boot [Enabled]
Fast Boot [Disable Link]</td><td>Number of seconds to wait for setup activation key. The maximum value is 8</td></tr><tr><td>Boot Configuration
Boot Option #1 [Hard Disk]
Boot Option #2 [NVME]
Boot Option #3 [UEFI AP]
Boot Option #4 [CD/DVD]
Boot Option #5 [SD]
Boot Option #6 [USB Hard Disk]
Boot Option #7 [USB CD/DVD]
Boot Option #8 [USB Key:UEFI:
SanDisk, Partition 1]
Boot Option #9 [USB Floppy]
Boot Option #10 [USB Lan]
Boot Option #11 [Network]</td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10:Save &amp; Exit
ESC: Exit</td></tr><tr><td>UEFI USB Key Drive BBS Priorities</td><td></td></tr></table>

# Setup Prompt Timeout

Number of seconds to wait for setup activation key. The maximum value is 8.

# Bootup Num-Lock State

Sets keypad Number Lock status following boot.

# Quiet Boot

<table><tr><td>Option</td><td>Description</td></tr><tr><td>Disabled</td><td>Directs BIOS to display POST messages</td></tr><tr><td>Enabled</td><td>Directs BIOS to display the OEM logo.</td></tr></table>

# Fast Boot

<table><tr><td>Option</td><td>Description</td></tr><tr><td>Disabled</td><td>Directs BIOS to perform all POST tests.</td></tr><tr><td>Enabled</td><td>Directs BIOS to skip certain POST tests to boot faster.</td></tr></table>

While enabling Fast Boot can reduce system ready time, some prerequisites can reduce effectiveness.

# Boot Configuration

Specifies the priority of boot devices, all of which are detected during POST and displayed. Target Boot Option # and click to select the desired device.

# UEFI USB Hard Drive Disk Drives BBS Priorities

Specifies Boot Device Priority sequence from available UEFI USB Drives.

# B.6 Save & Exit

<table><tr><td colspan="2">Aptio Setup - AMI</td></tr><tr><td colspan="2">Main Advanced Chipset Security Boot Save &amp; Exit MEBx</td></tr><tr><td rowspan="2">Save Changes and Exit
Discard Changes and Exit
Save Changes and Reset
Discard Changes and Reset
Save Options
Save Changes
Discard Changes
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
UEFI: SanDisk, Partition 1 (SanDisk)
Launch EFI Shell from filesystem device</td><td>Exit system setup after saving the changes.</td></tr><tr><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.22.1286 Copyright (C) 2023 AMI</td></tr></table>

# Save Changes and Exit

Exits system setup after saving the changes.

# Discard Changes and Exit

Exits system setup without saving any changes.

# Save Changes and Reset

Resets the system setup after saving changes.

# Discard Changes and Reset

Resets system setup without saving any changes.

# Save Changes

Saves Changes so far to any of the setup options.

# Discard Changes

Discards Changes so far to any of the setup options.

# Restore Defaults

Sets all BIOS options to default settings, designed for maximum system stability but less than maximum performance. Select Restore Defaults if the computer encounters system configuration problems.

# Save as User Defaults

Saves all changes so far as User Defaults.

# Restore User Defaults

Restores user defaults to all setup options.

# Launch EFI Shell from filesystem device

Attempts to launch EFI Shell application (Shell.efi) from one of the available filesystem devices.

# B.7 MEBx

Intel® AMT

Enable/Disable Intel® AMT support.

Intel® AMT Configuration

Select Intel® AMT configurations in BIOS.

# Appendix C Watchdog Timer (WDT) Function Library

This appendix describes use of the watchdog timer (WDT) function library for the MVP-6200 controller. The watchdog timer is a hardware mechanism provided to reset the system if the operating system or an application stalls. After starting, the watchdog timer in the application must be periodically reset before the timer expires. Once the watchdog timer expires, a hardware-generated signal is sent to reset the system.

# C.1 WDT with API/Windows

The WDT API library files and a demo program (incl. source code) can be downloaded from: https://www.adlinktech.com/Products/ Industrial\_PCs\_Fanless\_Embedded\_PCs/ExpandableFanless EmbeddedComputers/MVP-6200\_Series

To use the WDT function library for the MVP-6200, include the header file WDT.h and linkage library WDT.lib in the C++ project.

# InitWDT

Initializes the watchdog timer function. Must be called before the invocation of any other WDT function.

# Syntax

C/C++

BOOL InitWDT()

# Parameters

None

# Return codes

TRUE if watchdog timer is successfully initialized.

FALSE if watchdog timer fails to initialize.

# SetWDT

Sets the timeout value of the watchdog timer. There are two parameters for this function to indicate the timeout ticks and unit. ResetWDT or StopWDT should be called before the expiration of watchdog timer, or the system will reset.

# Syntax

C/C++

BOOL SetWDT(BYTE tick, BYTE unit)

# Parameters

tick

Specify the number of ticks for watchdog timer. A valid value is 1 - 60.

unit

Specifies the timeout ticks of the watchdog timer.

<table><tr><td>Value</td><td>Description</td></tr><tr><td>0</td><td>The unit for one tick is 1 second. For example, when one tick is specified as 15 and the unit as 0, the timeout value is 15 seconds.</td></tr><tr><td>1</td><td>The unit for one tick is one minute. For example, whenone tick is specified as 60 and the unit as 1, the timeout value is 60 minutes.</td></tr></table>

# Return codes

TRUE if timeout value of watchdog timer is successfully set.

FALSE if timeout value of watchdog timer is failed to set.

# StartWDT

Start the watchdog timer function. Once the StartWDT is invoked, the watchdog timer starts. ResetWDT or StopWDT should be called before the expiration of watchdog timer, or the system will reset.

# Syntax

C/C++

BOOL StartWDT()

# Parameters

None

# Return codes

TRUE if watchdog timer is successfully started.

FALSE if watchdog timer is failed to start.

# ResetWDT

Reset the watchdog timer. The invocation of ResetWDT allows restoration of the watchdog timer to the initial timeout value specified in SetWDT function. ResetWDT or StopWDT should be called before the expiration of the watchdog timer, or the system will reset.

# Syntax

C/C++

BOOL ResetWDT()

# Parameters

None

# Return codes

TRUE if watchdog timer is successfully reset.

FALSE if watchdog timer fails to reset.

# StopWDT

Stops the watchdog timer.

# Syntax

C/C++

BOOL StopWDT()

# Parameters

None

# Return codes

TRUE if watchdog timer is successfully stopped.

FALSE if watchdog timer fails to stop.

# C.2 WDT with DOS/Linux

Under Linux, please program the WDT function using the eSPI IO registers according to the sample program as follows.

```c
#include &lt;dos.h&gt;
#include &lt;stddef.h&gt;
#include &lt;stdio.h&gt;

/* Config NCT6126D to enter config mode */
EnterConfig(void)
{
    outp(0x4E, 0x87);
    outp(0x4E, 0x87);
}

/* Config to exit config mode */
ExitConfig(void)
{ outp(0x4E, 0xAA);
}

/* Read byte */
unsigned char r_reg(unsigned char regoffset)
{ outp(0x4E, regoffset);
return inp(0x4F); }
/* Write byte */
void w_reg(unsigned char regoffset, unsigned char data)
{ outp(0x4E, regoffset); outp(0x4F, data);
}

main(void)
{
    unsigned int count;
    /* print program title */
printf("----MVP-6200 WDT Demo----
----\n");
```

```c
printf("Init and config GPIO
ports<<<<<<<<<<<<<<<<<<<<<<\n");

printf("----
----\n");

EnterConfig();

/* config WDT registers */
w_reg(0x07,0x08);
/* enable keyboard interrupt to reset WDT timeout
value */
w_reg(0xF2,r_reg(0xF2)|0x40);
/* set unit as second */
w_reg(0xF0,r_reg(0xF0)&~0x04);
/* start the Watchdog */
w_reg(0x30,0x01);
/* set timeout value as 30 seconds */
/* WDT start automatically while timeout value is set
*/

w_reg(0xF1,0x1E);

printf("----
----\n");

printf("WDT is set and counting down
now.<<<<<<<<<<<<<<\n");

printf("----
----\n");

for(count=30;count!=0;count--)
{ printf("Countdown %2d : .\n",count);
/* reset WDT timeout value to 10 seconds */
/* w_reg(0x73,0x0A); */
sleep(1);
}
/* disable WDT */
/* WDT stop while timeout value is set to zero */
w_reg(0x30,0x00);
```

```txt
printf("WDT is disable. Program is terminating.");
ExitConfig();
return 0;
}
```

# Appendix D Digital Input/Output Function Library

DI/O provides input/output to support inter-device communications. Simple programming guides allow easy transmission of digital signals between the system and attached peripherals.

# DI/O with API/Windows

Matrix DI/O API library files and a demo program (incl. source code) can be downloaded from http://www.adlinktech.com.

To use the DI/O function library for MVP-6200 series, include the header file awl.h and linkage library awl.lib in the C++ project. DI/O functions are as follows.

# AwlDioGetValue

Reads the digital logic state of a digital input line.

# Syntax

C/C++

int \_\_stdcall AwlDioGetValue(int Index)

# Parameter(s)

Index

Indexes the digital logic state of MVP-6200 digital input channels 1 to 8 (bit 0 to 7)

# Return codes

```txt
0: Operation Success
-1: Operation Failed
```

# AwlDioSetValue

Sets the digital logic state of the digital output line.

# AwlDioGetValue

Reads the digital logic state of a digital input line.

# Syntax

C/C++

int \_\_stdcall AwlDioGetValue(int Index , int Value)

# Parameter(s)

Index

Indexes the digital logic state of MVP-6200 digital input channels 1 to 8 (bit 0 to 7)

Value

Sets the digital logic state of MVP-6200 digital output channels 1 to 8 (bit 0 to 7) to 0 or 1.

# Return codes

0: Operation Success

-1: Operation Failed

# Important Safety Instructions

For user safety, please read and follow all instructions, Warnings, Cautions, and Notes marked in this manual and on the associated device before handling/operating the device, to avoid injury or damage.

 Read these safety instructions carefully.
 Keep the User’s Manual for future reference.
Read the Specifications section of this manual for detailed information on the recommended operating environment.
 The device can be operated at an ambient temperature of 50ºC with DC input; 35ºC with adapter input.
It is recommended that the device be installed in Information Technology Rooms that are in accordance with Article 645 of the National Electrical Code and NFPA 75.

 To avoid electrical shock and/or damage to device:

 Keep device away from water or liquid sources.
 Keep device away from high heat or humidity.
 Keep device properly ventilated (do not block or cover ventilation openings).
 Always use recommended voltage and power source settings.
 Always install and operate device near an easily accessible electrical outlet.
 Secure the power cord (do not place any object on/over the power cord).
 Only install/attach and operate device on stable surfaces and/or recommended mountings.
 The power must be connected to a ground connection.

If the device will not be used for long periods of time, turn off and unplug from its power source.
 Never attempt to repair the device, which should only be serviced by qualified technical personnel using suitable tools.

 A Lithium-type battery may be provided for uninterrupted backup or emergency power.

![The image displays a yellow triangular warning sign with a black border. Inside the triangle is a black exclamation point. Directly below the triangle is the text 'CAUTION:' in black capital letters.](.mvp-6200-50m-41053-1000-10/7f915a969ab30def77ac2c3011922a440c0332a80abe6121e77f086156c0f827.jpg)

Risk of explosion if battery is replaced with one of an incorrect type; please dispose of used batteries appropriately.

 The device must be serviced by authorized technicians when:

 The power cord or plug is damaged
 Liquid has entered the device interior
 The device has been exposed to high humidity and/or moisture
 The device is not functioning or does not function according to the User’s Manual
 The device has been dropped and/or damaged and/or shows obvious signs of breakage

Disconnect the power supply cord before loosening the thumbscrews and always fasten the thumbscrews with a screwdriver before starting the system up
 It is recommended that the device be installed only in a server room or computer room where access is:

 Restricted to qualified service personnel or users familiar with restrictions applied to the location, reasons therefor, and any precautions required

 Only afforded by the use of a tool or lock and key, or other means of security, and controlled by the authority responsible for the location

 The wire of terminal block should be fixed by an authorized technician with a recommended wire range: 30-10 sol/str, wire type: Cu, torque (Lb IN.): 5.3

![Yellow triangular warning sign with black smoke symbol indicating hot weather](.mvp-6200-50m-41053-1000-10/479d364782502dfd136a83bac53b5850280a89a17a525f4fb0a8298763883073.jpg)

# BURN HAZARD

Hot surface! Do not touch! Touching this surface could result in bodily injury. To reduce risk, allow the surface to cool before touching.

# Consignes de Sécurité Importante

S'il vous plaît prêter attention stricte à tous les avertissements et mises en garde figurant sur l'appareil, pour éviter des blessures ou des dommages.

 Lisez attentivement ces consignes de sécurité.
 Conservez le manuel de l'utilisateur pour pouvoir le consulter ultérieurement.
Lisez la section Spécifications de ce manuel pour des informations détaillées sur l'environnement d'exploitation recommandé.
Le dispositif peut être utilisé à une température ambiante de 50ºC avec une entrée DC ; 35ºC avec une entrée d'adaptateur.
Il est recommandé d'installer l'appareil dans des salles de technologie de l'information conformes à l'article 645 du National Electrical Code et à la NFPA 75.
 Lorsque l'installation/le montage ou la désinstallation/le retrait du périphérique est necessaire:
 Mettez l'appareil hors tension et débranchez tous les cordons/câbles d'alimentation
 TeRéinstallez tous les couvercles de châssis avant de rétablir l'alimentation
 Pour éviter les chocs électriques et/ou d’endommager l’appareil:
 Tenez l'appareil à l'écart de toute source d'eau ou de liquide.
 Tenez l'appareil à l'écart d'une forte chaleur ou d'une humidité élevée.
 Maintenez l'appareil correctement ventilé (n'obstruer ou ne couvrez pas les ouvertures de ventilation).
 Utilisez toujours les réglages de tension et de source d'alimentation recommandés.
 Installez et utilisez toujours l'appareil près d'une prise de courant facilement accessible.

 Fixez le cordon d'alimentation (ne placez aucun objet sur le cordon d'alimentation).
 Installez/fixez et utilisez l'appareil uniquement sur des surfaces stables et/ou sur les fixations recommandées.
 L'ordinateur Smart Touch est alimenté par un adaptateur ou une source CC. Veuillez vous assurer que l'adaptateur ou la source CC doit conserver la connexion à la terre s'il est doté d'une protection.

 Si l'appareil ne doit pas être utilisé pendant de longues périodes, éteignez-le et débranchez-le de sa source d'alimentation
N'essayez jamais de réparer l'appareil, qui ne doit être réparé que par un personnel technique qualifié à l'aide d'outils appropriés
 Une batterie de type Lithium peut être fournie pour une alimentation de secours ininterrompue ou d'urgence.

![The image displays a standard warning sign featuring a yellow triangle with a thick black border. Centered inside the triangle is a large black exclamation point. Directly beneath the triangle, the word 'CAUTION:' is printed in black capital letters.](.mvp-6200-50m-41053-1000-10/e76b4b16c1d09429b5b491abdb3daa9277d5d61ee55ac47a79828e263451c421.jpg)

ATTENTION: Risque d’explosion si la pile est remplacée par une autre de type incorrect. Veuillez jeter les piles usagées de façon appropriée.

 L'appareil doit être entretenu par des techniciens agrees lorsque:
 Le cordon d’alimentation ou la prise est endommagé(e)
 Un liquide a pénétré à l'intérieur de l'appareil.
 L'appareil a été exposé à une forte humidité et/ou de la buée.
 L'appareil ne fonctionne pas ou ne fonctionne pas selon le manuel de l'utilisateur.
 L'appareil est tombé et/ou a été endommagé et/ou présente des signes évidents de dommage.

Débranchez le cordon d'alimentation avant de desserrer les vis à oreilles et serrez toujours les vis à oreilles avec un tournevis avant de mettre le système en marche.

 Il est recommandé d'installer l'appareil uniquement dans une salle de serveurs ou une salle informatique où l'accès est:

 Réservé au personnel de service qualifié ou aux utilisateurs familiarisés avec les restrictions appliquées à l'emplacement, aux raisons de ces restrictions et toutes les précautions requises
 Uniquement autorisé par l'utilisation d'un outil, d'une serrure et d'une clé, ou d'un autre moyen de sécurité, et contrôlé par l'autorité responsable de l'emplacement.

 Le fil du bornier doit être fixé par un technicien agréé et recommandation pour la gamme de fils : 30-10 sol/str, type de fil : Cu, couple (Lb IN.) : 5,3

![Yellow triangular warning sign with black smoke symbol indicating hot weather](.mvp-6200-50m-41053-1000-10/8f447eb873228159bc627b53f135baad2e0c01a0a33f6cdf966fbaad1563f37b.jpg)

# RISQUE DE BRÛLURES

Partie chaude! Ne touchez pas cette surface, cela pourrait entraîner des blessures. Pour éviter tout danger, laissez la surface refroidir avant de la toucher.

This page intentionally left blank.

# Getting Service

Ask an Expert: https://www.adlinktech.com/en/Askanexpert

# ADLINK Technology, Inc.

No. 66, Huaya 1st Road, Guishan District

Taoyuan City 333, Taiwan

Tel: +886-3-216-5088

Fax: +886-3-328-5723

Email: service@adlinktech.com

# Ampro ADLINK Technology, Inc.

6450 Via Del Oro, San Jose,

CA 95119-1208, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

Fax: +1-408-600-1189

Email: info@adlinktech.com

# ADLINK Technology (China) Co., Ltd.

300 Fang Chun Rd., Zhangjiang Hi-Tech Park

Pudong New Area, Shanghai, 201203 China

Tel: +86-21-5132-8988

Fax: +86-21-5132-3588

Email: market@adlinktech.com

# ADLINK Technology GmbH

Hans-Thoma-Straße 11

D-68163 Mannheim, Germany

Tel: +49-621-43214-0

Fax: +49-621 43214-30

Email: emea@adlinktech.com

Please visit the Contact page at www.adlinktech.com for information on how to contact the ADLINK regional office nearest you.
[🔗 Link to the original document](.mvp-6200-50m-41053-1000-10/mvp-6200-50m-41053-1000-10.pdf)