# MXE-1400 Series

# MXE-1401

# Fanless Embedded Computer

# User's Manual

![Front view of a COM-branded industrial device with ports, connectors, and ventilation slots (no readable text or symbols)](.mxe-1400-50-1z192-2010-250-en/b8028f646c6355c2c98afb2dd14570f53489eedb395ea5d7f3152fcf90c26625.jpg)

Manual Rev.: 2.50

Revision Date: Sept. 5, 2016

Part No: 50-1Z192-2010

# Revision History

<table><tr><td>Revision</td><td>Release Date</td><td>Description of Change(s)</td></tr><tr><td>2.00</td><td>July 29, 2016</td><td>Initial Release</td></tr><tr><td>2.50</td><td>Sept. 5, 2016</td><td>Section 2.2 Adaptors &amp; Additional Accessories added</td></tr></table>

# Preface

# Copyright 2016 ADLINK Technology, Inc.

This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

# Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

# Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.

# Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

# Conventions

Take note of the following conventions used throughout this manual to make sure that users perform certain tasks and instructions properly.

![The image shows a simple icon of a white document with horizontal lines and a large, red checkmark drawn over it.](.mxe-1400-50-1z192-2010-250-en/e81941dea6085a20d14ed9fd4feed0b015dd51b9f4799dddb8c89df7c699ee9f.jpg)
NOTE:

Additional information, aids, and tips that help users perform tasks.

![The image displays a standard warning sign featuring a yellow equilateral triangle with a thick black border. Centered inside the triangle is a large black exclamation point.](.mxe-1400-50-1z192-2010-250-en/0b904ccbde41921f450fab8f92460223453e73d7e18250c943d2026569dac968.jpg)
CAUTION:

Information to prevent minor physical injury, component damage, data loss, and/or program corruption when trying to complete a task.

![A red triangular warning sign with a white border featuring a large white exclamation mark in its center, positioned directly below a black horizontal line.](.mxe-1400-50-1z192-2010-250-en/0d1c10fd86a8c32fcaedc25f7f6add0dd2cfe8039ff5aed87e1f95430fe5ea6a.jpg)
WARNING:

Information to prevent serious physical injury, component damage, data loss, and/or program corruption when trying to complete a specific task.

# Table of Contents

# Revision History...... ii

# Preface...... iii

# List of Tables ix

# List of Figures ...... xi

# 1 Introduction ...... 1

1.1 Overview.... 1
1.2 Features.... 2
1.3 Specifications.... 3
1.4 Unpacking Checklist 5
1.5 Mechanical Drawings.... 5
1.6 Front Panel I/O Connectors 8

1.6.1 Power Button 9
1.6.2 Power Button Header 9
1.6.3 Reset Button....9
1.6.4 LED Indicators 9
1.6.5 DisplayPort Connector.... 10

Multi-Display Option 11

Optional Accessories for DP to VGA/DVI Adapters ..... 11

1.6.6 Audio Connector.... 11
1.6.7 DVI-I Connector....12
1.6.8 Gigabit Ethernet Ports 13
1.6.9 COM Port Connectors 14
1.6.10 USB 3.0 Ports....15
1.6.11 CFast Port 15
1.6.12 USB 2.0 Ports....15
1.6.13 DC Power Connector.... 16
1.6.14 DB-26P Digital I/O Connector.... 16

Optional Accessories for DB-26P Digital I/O Connector 18

Isolated Digital Input Circuits 18

Isolated Digital Output Circuits 18

# 1.7 Rear Panel.... 20

1.7.1 CFast Slot....20
1.7.2 HDD Fast Plug Slot....20

# 1.8 Internal I/O Connectors.... 21

1.8.1 Clearing CMOS Jumper....22
1.8.2 DC 5V and 3.3V Connectors for GPS Module......22
1.8.3 USIM Port 23
1.8.4 SATA Connectors 23
1.8.5 Extended Power/Reset/LED 24

# 2 Getting Started.... 25

2.1 Unpacking Checklist 25
2.2 Adaptors & Additional Accessories 25
2.3 Installing a Hard Disk Drive.... 25
2.4 Installing a Mini-PCIe Device 28
2.5 Installing CFast Card 30
2.6 Connecting DC power 31
2.7 Wall-mounting the MXE-1400 31
2.8 Cooling Considerations.... 34
2.9 Driver Installation 35

# A Appendix: Watchdog Timer (WDT) & DI/O Function Libraries....37

A.1 WDT with API/Windows 37

InitWDT 37

SetWDT 38

A.2 DI/O with API/Windows 40

GPIO\_Init 40

GPI\_Read() 40

GPO\_Write() 41

GPO\_Read() 41

# B Appendix: BIOS Setup 43

B.1 Main 44

B.1.1 BIOS Information 44

B.1.2 System Time/System Date 44

B.2 Advanced 45

CPU Configuration 46

Memory Configuration 48

Onboard Device Configuration 49

Advanced Power Management 51

SATA Configuration 52

Serial Port Console Redirection 53

CSM Configuration 56

System Management (SEMA) 58

B.3 Chipset.... 59

USB Configuration 60

High Precision Timer 60

Intel IGD configuration 61

B.4 Security 62

B.5 Boot 63

Boot Configuration 63

Boot Option Priorities 64

B.6 Exit.... 64

# C Appendix: SEMA Utility GUI 67

C.1 System Overview Tab.... 67

C.1.1 Board Information 67

C.2 System Health Tab 68

C.2.1 Temperatures & Fan Speed 68

C.2.2 Power Consumption 69

C.2.3 Runtime Statistics....69

C.2.4 Flags 69

C.3 User Flash Memory Tab 70

C.3.1 Memory....71

C.3.2 Write Memory 71

C.4 Hardware Control Tab.... 73

C.4.1 Watchdog 73

C.4.2 Backlight Control....74

C.4.3 Smart Fan 74

C.5 Hardware Monitor Tab 76

C.6 I2C Bus Tab 77

C.7 GPIO Tab.... 79

C.7.1 GPIO information 80

C.7.2 IO Read 81

C.7.3 IO Write....81

C.7.4 IO XorAndXor 81

C.8 Status Bar 81

# Important Safety Instructions.... 83

# Getting Service 87

# List of Tables

Table 1-1: Front Panel I/O Legend 8

Table 1-2: LED Indicator Legend....9

Table 1-3: DisplayPort Pin Assignment 10

Table 1-4: Multi-Display Configuration.... 11

Table 1-5: DVI-I Connector Pin Assignment.... 12

Table 1-6: Gigabit Ethernet Port LED Function ..... 14

Table 1-7: COM Port Pin Assignments.... 15

Table 1-8: DC Power Supply Connector Signals.... 16

Table 1-9: DB-26P Connector Pin Assignment .... 17

Table 1-10: Digital I/O Specifications.... 17

Table 1-11: MXE-1400 Rear Panel I/O Connector Legend ..... 20

Table 1-12: Internal I/O Legend 21

Table 1-13: Clear CMOS Jumper Pin Assignment 22

Table 1-14: DC 5V and 3.3V Connectors Pin Assignments ..... 23

Table 1-15: Extended Reset/LED Pin Assignments ..... 24

Table B-1: Restore On Power Loss Settings 51

This page intentionally left blank.

# List of Figures

Figure 1-1: MXE-1400 Functional Block Diagram....5

Figure 1-2: Top View....6

Figure 1-3: Front View 7

Figure 1-4: Rear View 7

Figure 1-5: (Left) Side View 7

Figure 1-6: Front Panel I/O 8

Figure 1-7: Gigabit Ethernet Ports 13

Figure 1-8: COM Port Connector 14

Figure 1-9: DB-26P Digital I/O Connector....16

Figure 1-10: Isolated/Differential Digital Input Circuit.... 18

Figure 1-11: Isolated Digital Output Circuits .... 19

Figure 1-12: Isolated Digital Output Sample Application Circuit ... 19

Figure 1-13: Rear Panel I/O....20

Figure 1-14: Internal I/O....21

Figure 1-15: Clear CMOS Jumper Pin Settings 22

Figure 1-16: DC 5V and 3.3V Connectors Configuration....23

Figure 1-17: Extended Reset/LED Configuration....24

This page intentionally left blank.

# 1 Introduction

![Front view of a black COMH device chassis with ports, connectors, and ventilation slots (no visible text or symbols)](.mxe-1400-50-1z192-2010-250-en/f4a9b4b5c8a7e4bfb8c38f2c4b0b5e48f80320589f920a3355d7c551b64969cc.jpg)

# 1.1 Overview

ADLINK's new Matrix MXE-1400 series of rugged quad-core fanless computers, featuring the latest generation of Intel® Atom™ E3845 (codename: BayTrail) delivers outstanding processor performance with minimum power consumption.

The MXE-1400 series accommodates rich I/O variety in a compact system, with DisplayPort, DVI-I (supporting both DVI and VGA signals), 3 GbE by Intel network interface controllers, 6 USB 2.0, 1 USB 3.0 with dedicated bandwidth, 8 isolated DIO, and 6 COM ports, with 4 BIOS-configurable among RS-232/422 and 485 with auto flow control. Versatile connection to a wide range of applications is provided by dual mini-PCIe slots and USIM socket allowing the MXE-1400 to act as a communications hub for a variety of wireless connections, such as BT/WiFi and 3G/LTE.

Leveraging proprietary mechanical engineering, the MXE-1400 series continues to offer all the popular features of the Matrix E series, including cable-free construction, wide operating temperature ranges, and 5 Grms vibration resistance. The entire ADLINK Matrix line undergoes rigorous testing for operational integrity.

In addition, the MXE-1400 accommodates the most recent modular design available in the Matrix series, keeping essential interfaces on the Mainboard, assigning flexible I/O expandability to the

AFM (Adaptive Function Modules), whereby selection or customization of I/O interfaces based on application requirements.

Combing superior processor performance, wireless capability, and rich I/O with flexible expandability, all in a compact and robust package, the ADLINK MXE-1400 is an ideal choice for a wide range of applications including intelligent transportation, in-vehicle multimedia, surveillance, and factory automation.

# 1.2 Features

▶ Quad-core Intel® Atom™ E3845
▶ Single side I/O access with SATA drive bay
▶ Compact 210(W) x 170(D) x 70(H) mm size
▶ Flexible modular design for I/O expansion
▶ Built-in ADLINK SEMA management solution
▶ Rugged construction provides fanless $-40^{\circ}C$ to $70^{\circ}C$ operability (w/industrial SSD)
Rich I/O :

DVI-I+DisplayPort, 6x USB 2.0, 1x USB 3.0, 3x GbE ports, 6x COM ports, 8x isolated DI/O
▷ 1x SATA-II (3.0 Gb/s), 2x mPCIe slots

![The image displays an icon of a document with faint horizontal lines running across it. A large, red checkmark is drawn diagonally from the bottom left to the top right over the document. The top left corner of the document is curled.](.mxe-1400-50-1z192-2010-250-en/1ec732ee5d4bc03e6fd90253722f954c5dda80449d281ed8e0ab8ac279ac7890.jpg)
NOTE:

Industrial SSD option guarantees cold system boot at $-40^{\circ}$ C and operation with 100% loading at $70^{\circ}$ C when installed.

# 1.3 Specifications

<table><tr><td colspan="2">MXE-1401</td></tr><tr><td colspan="2">System Core</td></tr><tr><td>Processor</td><td>Intel® AtomTM E3845</td></tr><tr><td>Chipset</td><td>SoC design</td></tr><tr><td>Video</td><td>2 independent displays out of 3 channels1x VGA+ DVI by DVI-I connector1x Display ports supports up to 2560 x 1600</td></tr><tr><td>Memory</td><td>2 GB DDR3L 1066 MHz SODIMM module (Up to 8 GB support)</td></tr><tr><td colspan="2">I/O Interface</td></tr><tr><td>Ethernet</td><td>3 GbE ports (3x Intel® I211 AT)</td></tr><tr><td>Serial Ports</td><td>4 BIOS configurable RS-232/422/485 (COM1 ~ COM4)2 RS-232 (COM5 &amp; COM6)</td></tr><tr><td>USB</td><td>6 USB 2.0 ports + 1 USB 3.0 port</td></tr><tr><td>DIO</td><td>8 DIO w/ 1.5KV isolation</td></tr><tr><td>Audio</td><td>1 mic-in and 1 line-out</td></tr><tr><td>Mini PCIe</td><td>2 internal PCIe mini card sockets</td></tr><tr><td>USIM</td><td>1 USIM socket for 3G communication (used for a 3G-mini module )</td></tr><tr><td>WDT</td><td>Supports watchdog timer</td></tr><tr><td colspan="2">Power Supply</td></tr><tr><td>DC Input</td><td>Built-in 9-32 VDC wide-range DC input3P pluggable connectors with latch (GND, V-, V+)</td></tr><tr><td>AC Input</td><td>Optional 80 W external AC-DC adapter for AC Input</td></tr><tr><td colspan="2">Storage</td></tr><tr><td>SATA HDD</td><td>1 onboard SATA-II port for 2.5" HDD/SSD Installation with drive bay</td></tr><tr><td>CompactFlash</td><td>1 CFAST slot, supporting PI/O and DMA modes</td></tr><tr><td colspan="2">Mechanical</td></tr><tr><td>Dimensions</td><td>210(W) x 170(D) x 70(H) mm</td></tr><tr><td>Weight</td><td>2.0 kg (4.42 lbs)</td></tr><tr><td>Mounting</td><td>Wall-mount kit</td></tr><tr><td colspan="2">Environmental</td></tr><tr><td>Operating Temperature</td><td>Standard: 0°C to 50°C (w/HDD)Extended Temperature: -40°C to 70°C(w/industrial SSD or CFAST)</td></tr><tr><td>Storage Temperature</td><td>-40°C to 85°C (excl. HDD/SDD/CFAST)</td></tr><tr><td>Humidity</td><td>Approx. 95% @ 40°C (non-condensing)</td></tr><tr><td rowspan="2">Vibration</td><td>Operating, 5 Grms, 5-500 Hz, 3 axes (w/ CFAST or SSD)</td></tr><tr><td>Operating, 0.5 Grms, 5-500 Hz, 3 axes (w/ HDD)</td></tr><tr><td>ESD</td><td>Contact +/-4 KV and Air +/-8 KV</td></tr><tr><td>Shock</td><td>Operating, 50 G, half sine 11 ms duration (w/ CFAST or SSD)</td></tr><tr><td>EMC</td><td>CE and FCC Class A</td></tr></table>

<table><tr><td colspan="3">Power Consumption</td></tr><tr><td>Power off</td><td>5.76W</td><td>In shutdown mode with DC input and only USB keyboard/mouse</td></tr><tr><td>System Idle</td><td>13.92W</td><td>Under Windows Desktop with no application programs executed</td></tr><tr><td>Processor full load</td><td>19.92W</td><td>Under Windows with 100% CPU utilization and 2D/3D graphics load</td></tr><tr><td>System full load</td><td>43.2W</td><td>Under Windows with 100% CPU utilization and simultaneous access to all I/O devices.</td></tr><tr><td>Recommended power supply</td><td>80W</td><td>With consideration of voltage de-rating under high environmental temperature.</td></tr></table>

![This flowchart depicts the connections for an 'Intel Bay Trail-I' central processor block. The diagram is divided into left and right sections connected to the central block.\n\n**Central Block:**\n*   Intel Bay Trail-I\n\n**Left Side Blocks and Connections:**\n*   **DisplayPort Connector** connects to **DDI0** and **CRT**.\n*   **DV-I Connector** connects to **DVI** and **ASMedia ASM1442**.\n*   **ASMedia ASM1442** connects to **DDI1**.\n*   **USB3.0 Connector** connects to **USB3.0** and **USB2.0**.\n*   **RJ45 Connector** connects to **LAN0 MDI** and **Intel I211**.\n*   **Intel I211** connects to **PCIE X1**.\n*   **Mini PCIe v1.2 Slot** connects to **PCIE X1**.\n*   **Mini PCIe v1.2 Slot** connects to **PCIE switch**.\n*   **PCIE switch** connects to **PCIE X1**.\n*   **Mini PCIe v1.2 Slot** connects via **USB2.0 x2** to **USB HUB2**.\n*   **USIM Socket** connects via **USB2.0 x2** to **USB HUB2**.\n*   **USB2.0 x2 Connector** connects via **USB2.0 x4** to **USB HUB1**.\n*   **USB2.0 x2 Connector** connects to **USB HUB1**.\n*   **USB HUB2** connects via **USB2.0** to the central block.\n*   **USB HUB1** connects via **USB2.0** to the central block.\n*   **USB Dongle** connects via **USB2.0** to the central block.\n*   **SATA Connector (External SSD/DOM)** connects via **SATA0 2.0** to the central block.\n*   **External CFast Connector** connects via **SATA1 2.0** to the central block.\n*   **HP MIC Connector** connects via **Audio** to **Realtek ALC269Q**.\n*   **Realtek ALC269Q** connects via **HDA** to the central block.\n\n**Right Side Blocks and Connections:**\n*   **DDR3L 1333 SO-DIMM0** connects via **Channel A** to the central block.\n*   **DDR3L 1333 SO-DIMM1** connects via **Channel B** to the central block.\n*   **SEMA BMC** connects via **SMBus** to the central block.\n*   **Intel I211** connects via **PCIE X1** to the central block.\n*   **Intel I211** connects via **PCIE X1** to the central block.\n*   **USB2.0 x2 Connector** connects via **USB2.0 x2** to the central block.\n*   **GPIO x16** connects to the central block.\n*   **LPC** connects to the central block.\n*   A green dashed box labeled **AFM-IA-02 Function Module** encloses the following components:\n    *   **8DI / 8DO Connector**\n    *   **SIO IT8786E** connects via **LPC** to the central block.\n    *   **SIO IT8786E** connects to **COM1/COM2** which connects to **DB-9 x2 Conn**.\n    *   **SIO IT8786E** connects via **RS-232/422/485** to **COM3/COM4** which connects to **DB-9 x2 Conn**.\n    *   **SIO IT8786E** connects via **RS-232/422/485** to **COM5/COM6** which connects to **DB-9 x2 Conn**.\n    *   **SIO IT8786E** connects via **RS-232**.](.mxe-1400-50-1z192-2010-250-en/6523ccdd6c3ab96af1809f5d98df1d8dbe4880baa2c4e65d2662383635746bba.jpg)

Figure 1-1: MXE-1400 Functional Block Diagram

# 1.4 Unpacking Checklist

Before unpacking, check the shipping carton for any damage. If the shipping carton and/or contents are damaged, inform your dealer immediately. Retain the shipping carton and packing materials for inspection. Obtain authorization from your dealer before returning any product to ADLINK. Ensure that the following items are included in the package.

▶ MXE-1401 controller
▶ Wall-mount bracket (in Accessory Box)
▶ Screw pack for wall-mounting and HDD fixing (in Accessory Box)
▶ Quick Start Guide

# 1.5 Mechanical Drawings

Shown with wall-mount brackets installed. For more information, see "Wall-mounting the MXE-1400" on page 31.

![An icon of a white document with horizontal grey lines and a large red checkmark.](.mxe-1400-50-1z192-2010-250-en/25243ff50ee9ac286c3c5a44ddc2153dd061373657822dbb956a4845b373ee5e.jpg)
NOTE:

All dimensions shown are in millimeters (mm) unless otherwise stated.

![210\n155 170\nMatrix®\n222\n236](.mxe-1400-50-1z192-2010-250-en/8f516ab8e0035fa4a6314a19a0e2972a542bb1ed83b5bd35deec4d65f624e710.jpg)

Figure 1-2: Top View

![ADLINK\nCOM5\nCOM3\nCOM1\nCOM6\nCOM4\nCOM2](.mxe-1400-50-1z192-2010-250-en/32d0c5ce42d3c2332c2490eb8f51bbf841aadef0481085a8c718e938642db6e1.jpg)

Figure 1-3: Front View

![Technical line drawing of a device rear panel with mounting holes and a central rectangular component labeled 'CFest' (no text or symbols beyond label)](.mxe-1400-50-1z192-2010-250-en/6ca2825532d26ebda63a58dee394fc108edbafce81e5516b2beaf38b5e50c81a.jpg)

Figure 1-4: Rear View

![70\n75](.mxe-1400-50-1z192-2010-250-en/8d6143b3828dabf88fcf5866347ed77864c8a2b926fac8168e89863f105c7c3c.jpg)

Figure 1-5: (Left) Side View

# 1.6 Front Panel I/O Connectors

![L\nK\nJ\nI\nH\nG\nE\nC A B\nV+ GND V-\n9V-32V DC IN\nDIO\nM K\nU3 U2 U1 WD I\nCC M5 COM 3 COM1\nCOM6 COM4 COM2\nF](.mxe-1400-50-1z192-2010-250-en/a823113550843f450f87063a7263bfc9fc2d9ef16ef9b2340fdabfbc1860307f.jpg)

Figure 1-6: Front Panel I/O

<table><tr><td>A</td><td>Power</td></tr><tr><td>B</td><td>Reset</td></tr><tr><td>C</td><td>Power header</td></tr><tr><td>D</td><td>LED indicators</td></tr><tr><td>E</td><td>Audio</td></tr><tr><td>F</td><td>UART</td></tr><tr><td>G</td><td>DisplayPort</td></tr><tr><td>H</td><td>DVI-I</td></tr><tr><td>I</td><td>I211Gigabit Ethernet</td></tr><tr><td>J</td><td>USB 3.0 (1600mA supported)</td></tr><tr><td>K</td><td>USB 2.0</td></tr><tr><td>L</td><td>DC power supply</td></tr><tr><td>M</td><td>DB-26P digital I/O</td></tr></table>

Table 1-1: Front Panel I/O Legend

# 1.6.1 Power Button

Non-latched push button with a blue LED indicator. System is turned on when button is pressed, and the power LED lit. If the system hangs, depressing the button for 5 seconds powers down the system.

# 1.6.2 Power Button Header

Allows connection of external power control cable.

# 1.6.3 Reset Button

Executes hard reset for the MXE-1400.

# 1.6.4 LED Indicators

In addition to the LED of the power button, LEDs on the front panel indicate the following operations.

<table><tr><td>LED</td><td>Color</td><td colspan="2">Description</td></tr><tr><td></td><td></td><td colspan="2"></td></tr><tr><td rowspan="2">Diagnostic (DG)</td><td rowspan="2">Green</td><td>Lit</td><td>No physical storage is connected</td></tr><tr><td>Blinking</td><td>No memory is installed on either SO-DIMM socket.</td></tr><tr><td>Watchdog (WD)</td><td>Yellow</td><td colspan="2">Flashes when watchdog timer starts</td></tr><tr><td>Hard disk drive (HD)</td><td>Red</td><td colspan="2">Blinking indicates SATA HDD is active</td></tr><tr><td>User-defined (U1, U2, U3)</td><td>White</td><td colspan="2">As set in GPIO</td></tr></table>

Table 1-2: LED Indicator Legend

# 1.6.5 DisplayPort Connector

Provides connection to VGA, DVI, HDMI monitor via DisplayPort 1.2 to VGA adapter cable, to DVI adapter cable, and to HDMI adapter cable.

![19\n1\n20\n2](.mxe-1400-50-1z192-2010-250-en/e674e156de1d4a99373f9c3decafb5c36c003628dc31d711972cf270af8eb574.jpg)

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>CN_DDPx0+</td><td>11</td><td>GND</td></tr><tr><td>2</td><td>GND</td><td>12</td><td>CN_DDPx3-</td></tr><tr><td>3</td><td>CN_DDPx0-</td><td>13</td><td>CN_DDPx_AUX_SEL</td></tr><tr><td>4</td><td>CN_DDPx1+</td><td>14</td><td>CN_DDPx_CONFIG2</td></tr><tr><td>5</td><td>GND</td><td>15</td><td>CN_DDPx_AUX+</td></tr><tr><td>6</td><td>CN_DDPx1-</td><td>16</td><td>GND</td></tr><tr><td>7</td><td>CN_DDPx2+</td><td>17</td><td>CN_DDPx_AUX-</td></tr><tr><td>8</td><td>GND</td><td>18</td><td>CN_DDPx_HPD</td></tr><tr><td>9</td><td>CN_DDPx2-</td><td>19</td><td>GND</td></tr><tr><td>10</td><td>CN_DDPx3+</td><td>20</td><td>+V3.3_DDPx_PWR</td></tr></table>

Table 1-3: DisplayPort Pin Assignment

# Multi-Display Option

With the computing and graphic performance enhancements of Intel HD Graphics Engine, the MXE-1400 supports two independent displays, configured as follows.

<table><tr><td>Display 1</td><td>DP</td><td>DP</td><td>VGA by DP</td></tr><tr><td>Display 2</td><td>DVI</td><td>VGA</td><td>DVI</td></tr><tr><td>Max. Res Display 1</td><td>2560 x 1600 @60Hz</td><td>2560 x 1600 @60Hz</td><td>2048 x 1280 @60Hz</td></tr><tr><td>Max. Res Display 2</td><td>1920 x 1200 @60Hz</td><td>2048 x 1280 @60Hz</td><td>1920 x 1200 @60Hz</td></tr></table>

Table 1-4: Multi-Display Configuration

# Optional Accessories for DP to VGA/DVI Adapters

<table><tr><td>Accessory</td><td>P/N</td></tr><tr><td>DisplayPort to DVI Active cable</td><td>30-01157-0000</td></tr><tr><td>DisplayPort to VGA cable</td><td>30-01121-0000</td></tr><tr><td>DisplayPort to DVI cable</td><td>30-01120-0000</td></tr><tr><td>DisplayPort to HDMI cable</td><td>30-01119-0000</td></tr></table>

# 1.6.6 Audio Connector

Provides connection of Mic and Headphone/Speaker channels, as marked.

# 1.6.7 DVI-I Connector

For connection to external monitor, which can separate into individual VGA and DVI-D (single link) interfaces.

![1 2 3 4 5 6 7 8\n9 10 11 12 13 14 15 16\n17 18 19 20 21 22 23 24\nC1 C2\nC3 C4\nC5](.mxe-1400-50-1z192-2010-250-en/52c1c418fce3e1dd5a3044eb4eb03df7aeb0463d17da3814e184ed3319a32f56.jpg)

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>DVI_Data2-</td><td>11</td><td>GND</td><td>21</td><td>N/C</td></tr><tr><td>2</td><td>DVI_Data2+</td><td>12</td><td>N/C</td><td>22</td><td>GND</td></tr><tr><td>3</td><td>GND</td><td>13</td><td>N/C</td><td>23</td><td>DVI clock+</td></tr><tr><td>4</td><td>CRT DDC clock</td><td>14</td><td>+5V</td><td>24</td><td>DVI clock-</td></tr><tr><td>5</td><td>CRT DDC data</td><td>15</td><td>GND</td><td colspan="2"></td></tr><tr><td>6</td><td>DVI DDC clock</td><td>16</td><td>Hot plug detect</td><td>C1</td><td>Analog Red</td></tr><tr><td>7</td><td>DVI DDC data</td><td>17</td><td>DVI_Data0-</td><td>C2</td><td>Analog Green</td></tr><tr><td>8</td><td>Analog vertical sync</td><td>18</td><td>DVI_Data0+</td><td>C3</td><td>Analog Blue</td></tr><tr><td>9</td><td>DVI_Data1-</td><td>19</td><td>GND</td><td>C4</td><td>Analog / horizontal sync</td></tr><tr><td>10</td><td>DVI_Data1+</td><td>20</td><td>N/C</td><td>C5</td><td>Analog GND</td></tr></table>

Table 1-5: DVI-I Connector Pin Assignment

# 1.6.8 Gigabit Ethernet Ports

3 Gigabit Ethernet ports are based on the Intel i211-AT GbE controller, featuring:

▶ IEEE 802.3az Energy Efficient Ethernet
▶ IEEE 1588/802.1AS precision time synchronization
▶ IEEE 802.3Qav traffic shaper
▶ Interrupt moderation, VLAN support, IP checksum offload
▶ PCIe OBFF (optimized buffer flush/fill) improves system power management
▶ Four transmit and four receive queues
▶ RSS and MSI-X to lower CPU utilization in multicore systems
▶ ECC (error correcting memory) in packet buffers
▶ Wake-On-LAN support
▶ NC-SI increases bandwidth passthrough
▶ Preboot eXecution Environment (PXE) flash interface support
▶ Jumbo frame support

![Four identical architectural floor plan views showing room layouts and structural elements (no text or labels)](.mxe-1400-50-1z192-2010-250-en/21a8e1278fe89d1b0acffc8c917a1947f6a8adea2022a6c7e77f8170c4a86416.jpg)

Figure 1-7: Gigabit Ethernet Ports

<table><tr><td>LED</td><td>Color</td><td>Status</td><td>Description</td></tr><tr><td rowspan="3">Active/Link</td><td rowspan="3">Yellow</td><td>Unlit</td><td>Ethernet port is disconnected.</td></tr><tr><td>Lit</td><td>Ethernet port is connected with no activity.</td></tr><tr><td>Flashing</td><td>Ethernet port is connected and active.</td></tr><tr><td rowspan="3">Speed</td><td rowspan="3">Green/Orange</td><td>Unlit</td><td>10Mbps</td></tr><tr><td>Green</td><td>100 Mbps</td></tr><tr><td>Orange</td><td>1000 Mbps</td></tr></table>

Table 1-6: Gigabit Ethernet Port LED Function

# 1.6.9 COM Port Connectors

Of 6 COM ports through D-sub 9-pin connectors, COM1 to COM4 support RS-232/422/485 modes via BIOS setting, and COM5 and COM6 support only RS-232.

![1\n5\n6\n9](.mxe-1400-50-1z192-2010-250-en/8ce83368e6d6203bce1e934367761287e373c541deaa9eff935765e1f8ad564d.jpg)

Figure 1-8: COM Port Connector

<table><tr><td>Pin</td><td colspan="3">Signal</td></tr><tr><td></td><td>RS232</td><td>RS422</td><td>RS485</td></tr><tr><td>1</td><td>DCD#</td><td>TXD422-</td><td>485DATA-</td></tr></table>

<table><tr><td>Pin</td><td colspan="3">Signal</td></tr><tr><td>2</td><td>RXD</td><td>TXD422+</td><td>485DATA+</td></tr><tr><td>3</td><td>TXD</td><td>RXD422+</td><td>N/S</td></tr><tr><td>4</td><td>DTR#</td><td>RXD422-</td><td>N/S</td></tr><tr><td>5</td><td>GND</td><td>N/S</td><td>N/S</td></tr><tr><td>6</td><td>DSR#</td><td>N/S</td><td>N/S</td></tr><tr><td>7</td><td>RTS#</td><td>N/S</td><td>N/S</td></tr><tr><td>8</td><td>CTS#</td><td>N/S</td><td>N/S</td></tr><tr><td>9</td><td>RI#</td><td>N/S</td><td>N/S</td></tr></table>

Table 1-7: COM Port Pin Assignments

# 1.6.10 USB 3.0 Ports

USB 3.0 supporting Type A connection is compatible with Super-Speed, Hi-Speed, full-speed and low-speed USB devices, with support for multiple boot devices, including USB flash, USB external HDD, and USB CD-ROM drivers and boot priority and boot device configured in BIOS.

![The image displays a digital icon featuring a white piece of paper with a folded top-right corner and faint horizontal lines, overlaid with a large, bold red checkmark.](.mxe-1400-50-1z192-2010-250-en/b54dd34cbd51ad903b0d6ea6e17446be9a2414d0f81b41b8b7a3265e5d8a8352.jpg)
NOTE:

▶ When using USB CD-ROM via USB 3.0 port to re-install or repair the OS, cold boot should be utilized
▶ USB 3.0 port supports additional current up to 1600mA, positioned as shown in Table 1-1 on page 8

# 1.6.11 CFast Port

A type II push-push CFast host connector on the front panel connects to the host controller by SATA interface, with data transfer rates up to 3.0Gb/s(300MB/s)/1.5Gb/s(150MB/s) supported.

# 1.6.12 USB 2.0 Ports

6 Type A USB 2.0 ports support multiple boot devices, including USB flash, USB external HDD, and USB CD-ROM drivers, with Boot Priority and Device configured via BIOS.

# 1.6.13 DC Power Connector

The DC power supply connector consists of V+, chassis ground, and V- pins (from right to left), with V+ and V- pins accepting DC power input and chassis ground pin enhancing EMC compatibility. The DC power input accepts input from 9V DC to 32 VDC.

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>V+(DC_IN)</td></tr><tr><td>2</td><td>GND(CHGND)</td></tr><tr><td>3</td><td>V- (DGND)</td></tr></table>

Table 1-8: DC Power Supply Connector Signals

# 1.6.14 DB-26P Digital I/O Connector

8CH isolated digital input and 8CH isolated digital output are provided through the DB-26P connector. General purpose input/output application with isolation requirement is recommended.

![9\n1\n18\n26\n19\n10](.mxe-1400-50-1z192-2010-250-en/ab2323719402bdab44f3a01ac21f55b16658247882e8d08d5811a510145ae541.jpg)

Figure 1-9: DB-26P Digital I/O Connector

<table><tr><td>Pin</td><td>Signal Name</td><td>Pin</td><td>Signal Name</td></tr><tr><td>1</td><td>IDI_0L</td><td>14</td><td>IDI_4H</td></tr><tr><td>2</td><td>IDI_1L</td><td>15</td><td>IDI_5H</td></tr><tr><td>3</td><td>IDI_2L</td><td>16</td><td>IDI_6H</td></tr></table>

<table><tr><td>Pin</td><td>Signal Name</td><td>Pin</td><td>Signal Name</td></tr><tr><td>4</td><td>IDI_3L</td><td>17</td><td>IDI_7H</td></tr><tr><td>5</td><td>IDI_45L</td><td>18</td><td>EOGND</td></tr><tr><td>6</td><td>EOGND</td><td>19</td><td>IDO_0</td></tr><tr><td>7</td><td>IDI_67L</td><td>20</td><td>IDO_1</td></tr><tr><td>8</td><td>+VDD</td><td>21</td><td>IDO_2</td></tr><tr><td>9</td><td>+5DIO_CN_ISO</td><td>22</td><td>IDO_3</td></tr><tr><td>10</td><td>IDI_0H</td><td>23</td><td>IDO_4</td></tr><tr><td>11</td><td>IDI_1H</td><td>24</td><td>IDO_5</td></tr><tr><td>12</td><td>IDI_2H</td><td>25</td><td>IDO_6</td></tr><tr><td>13</td><td>IDI_3H</td><td>26</td><td>IDO_7</td></tr></table>

Table 1-9: DB-26P Connector Pin Assignment

<table><tr><td>8CH Isolated DI</td><td>8CH Isolated DO</td></tr><tr><td>Logic high: 5 to 24V</td><td>Output: Open Drain N- Channel Power MOSFET driver</td></tr><tr><td>Logic low: 0 to 1.5V</td><td>250mA for all channels @ 60°C, 100% duty</td></tr><tr><td>Input resistance: 2.4kΩ @ 0.5W</td><td>Supply voltage: 5 to 35 VDC</td></tr><tr><td>Interrupt source: DI</td><td>Isolation voltage: 1.5kVDC channel 0 to 7</td></tr><tr><td>Isolation voltage: 1.5kV DC channel 0 to 7</td><td>200mA for +V5DIO_ISO (max.)</td></tr></table>

Table 1-10: Digital I/O Specifications

# Optional Accessories for DB-26P Digital I/O Connector

<table><tr><td>Accessory</td><td>P/N</td></tr><tr><td>DIN-37D-01 Terminal board with one 37-pin D-sub connector and DIN-rail mounting</td><td>91-14025-1020</td></tr><tr><td>DIO-to-DIN37 cable (26-pin to 37-pin)</td><td>30-01143-0000</td></tr></table>

# Isolated Digital Input Circuits

The input can accept voltages up to 24V, with 2.4kΩ input resistors. Connections between outside signals are as follows.

![IDI_nH\nR6 71\n2.4K +5%\nD21\nTVS\n1\n1\n4\n4\nDI\nIDI_nL\nIDI_67L\n2\n2\n3\n3\nGND](.mxe-1400-50-1z192-2010-250-en/fd38cd2d4bb1a2cd7c5aa62cc15961dd48974af1bbee9fe162df1fa227f59a3b.jpg)

Figure 1-10: Isolated/Differential Digital Input Circuit

# Isolated Digital Output Circuits

Each isolation digital output channel adopts a MOSFET transistor, capable of driving peak current up to 250mA (sustained current up to 100 mA) with voltage ranges from 5V to 35V. The VDD pin is connected in serial with a flywheel diode to protect the driver during inductance loading, such as relay, motor, or solenoid. The VDD must connect to external power to form a flywheel current loop.

![DO_n\nR6 82 680 R3 4 4 6\nMOSFET S19945 EDY-T1-GE3 N-CH\nC608 C15 N50 VKX7\nEOG ND\nD29\nBAV99\n+VDD\nIDO_n](.mxe-1400-50-1z192-2010-250-en/08477daaa904c5ef10669e8836724d17deaf7c6a512197099b634798b83cf73a.jpg)

Figure 1-11: Isolated Digital Output Circuits

![R682 680 R3 4\nQ26B\nD29\nBA89\nX\nLoad\nDC\n(5 to 35V)\nMO SFET S89 45 BDY-T1-GE3 NCH\nC608 C15 N50 VK7\nEOG ND](.mxe-1400-50-1z192-2010-250-en/6b0ebfafbece422a164f13f3dae7f65555ea53cea9a37681bdb2e78a4b4da146.jpg)

Figure 1-12: Isolated Digital Output Sample Application Circuit

# 1.7 Rear Panel

![A\nB\nC\nCFast\nC](.mxe-1400-50-1z192-2010-250-en/fe2a66767adf62308f935a583507203b8106dd4894244db38113e447eec4e4e2.jpg)

Figure 1-13: Rear Panel I/O

<table><tr><td>A</td><td>Antenna connection plugs (X4)</td></tr><tr><td>B</td><td>CFast Slot</td></tr><tr><td>C</td><td>HDD Fast Plug Slot</td></tr></table>

Table 1-11: MXE-1400 Rear Panel I/O Connector Legend

# 1.7.1 CFast Slot

The Type II push-push CFast host connector on the back panel connects to the host controller by SATA interface, supporting data transfer up to 3.0Gb/s (300MB/s)/1.5Gb/s (150MB/s).

# 1.7.2 HDD Fast Plug Slot

The Fast Plug host connector connecting to the host controller by SATA interface supports data transfer up to 3.0Gb/s (300MB/s)/1.5Gb/s (150MB/s).

# 1.8 Internal I/O Connectors

![The image displays a digital icon of a white document or sheet of paper with faint gray horizontal lines. A large, bold red checkmark is superimposed diagonally over the center of the document. The top right corner of the paper is slightly folded down.](.mxe-1400-50-1z192-2010-250-en/e7c6f3b99031587aad448f8049b1648f2e6d38105fc9e4df8b519d5f25c221d4.jpg)
NOTE:

Mainboard is shown in default configuration, with stacked AFM board

![A\nB C D E F\nG\nH\nADLINK\n31-4011-5418\nCE\nC:\WINDOWS\2.000\1.16\Naner\n000](.mxe-1400-50-1z192-2010-250-en/a5240c6f39bde3282c9cfe8a4af8d4d36cfcfc44d393f4d0560e138aac97a050.jpg)

Figure 1-14: Internal I/O

<table><tr><td>A</td><td>Extended Reset/LED wafer</td></tr><tr><td>B</td><td>GPS module power header – 5V</td></tr><tr><td>C</td><td>GPS module power header – 3.3V</td></tr><tr><td>D</td><td>USB 2.0 connector</td></tr><tr><td>E</td><td>Clear CMOS jumper</td></tr><tr><td>F</td><td>USIM slot</td></tr><tr><td>G</td><td>Mini-PCIE slot</td></tr><tr><td>H</td><td>SATA Connector</td></tr></table>

Table 1-12: Internal I/O Legend

# 1.8.1 Clearing CMOS Jumper

Under conditions in which the MXE-1400 fails to boot, clearing the BIOS content stored in CMOS and restoring the default settings may be effective. To clear CMOS, short Pin #1 and Pin #2 of JP1 and remove the jumper, after which the CMOS will be restored to factory default settings.

![Normal\nClear\nJP1\nJP1](.mxe-1400-50-1z192-2010-250-en/8047162038b3f0dc35cc1ff7facd4b8ca2690a615434972491667eb46d9c61e5.jpg)

Figure 1-15: Clear CMOS Jumper Pin Settings

<table><tr><td>Pin</td><td>Description</td></tr><tr><td>1</td><td>RTCRST#</td></tr><tr><td>2</td><td>Gnd</td></tr></table>

Table 1-13: Clear CMOS Jumper Pin Assignment

# 1.8.2 DC 5V and 3.3V Connectors for GPS Module

The two power connectors, for GPS module use, carry a maximum current rating of 1A each.

![CN9\nCN10](.mxe-1400-50-1z192-2010-250-en/58f1d1926f6e5452f9e423747996b91ddfb0eb6b31da02d9f33e8bae199382c9.jpg)

Figure 1-16: DC 5V and 3.3V Connectors Configuration

<table><tr><td>Pin</td><td>Description</td></tr><tr><td colspan="2">CN9</td></tr><tr><td>1</td><td>+5V</td></tr><tr><td>2</td><td>Gnd</td></tr><tr><td colspan="2">CN10</td></tr><tr><td>1</td><td>+3.3V</td></tr><tr><td>2</td><td>Gnd</td></tr></table>

Table 1-14: DC 5V and 3.3V Connectors Pin Assignments

# 1.8.3 USIM Port

Use of 3.5G mini-PCIe module requires a SIM card for communication with a telecom operator. The MXE-1400 provides a USIM port connected to the mini-PCIe connector, with which a SIM card and 3.5G mini-PCIe module can be installed to facilitate 3.5G communication.

# 1.8.4 SATA Connectors

The SATA connectors support data transfer up to 3.0Gb/s (300MB/ s), with a SATA host controller supporting legacy mode using I/O space and AHCI mode using memory space. The SATA connector is compatible with a 2.5in. hard disk drive (HDD) or solid state disk (SSD), requiring installation into the SATA connector with a HDD bracket.

# 1.8.5 Extended Power/Reset/LED

Internal LED connectors power indicators for the Power (from CN27) and Reset buttons (CN31), assigned as shown.

![CN9\nCN10](.mxe-1400-50-1z192-2010-250-en/4b84a24e46467fdee9aea1387e8464ed7b4f77ec73108c1c98c3080346590ba1.jpg)

Figure 1-17: Extended Reset/LED Configuration

<table><tr><td>Pin</td><td>Description</td></tr><tr><td colspan="2">CN27</td></tr><tr><td>1</td><td>+V3.3SB</td></tr><tr><td>2</td><td>Power LED</td></tr><tr><td colspan="2">CN31</td></tr><tr><td>1</td><td>Reset Button</td></tr><tr><td>2</td><td>Gnd</td></tr></table>

Table 1-15: Extended Reset/LED Pin Assignments

# 2 Getting Started

This chapter discusses installation of hard disk drive, mini-PCIe module, and CFast card. In addition to connection and use of DIO and COM ports, wall-mount installation is also described.

# 2.1 Unpacking Checklist

Before unpacking, check the shipping carton for any damage. If the shipping carton and/or contents are damaged, inform your dealer immediately. Retain the shipping carton and packing materials for inspection. Obtain authorization from your dealer before returning any product to ADLINK. Ensure that the following items are included in the package.

▶ MXE-1400 controller
▶ Wall-mount bracket (in Accessory Box)
▶ Screw pack for wall-mounting and HDD fixing (in Accessory Box)
▶ Quick Start Guide

# 2.2 Adaptors & Additional Accessories

Device adaptors and other optional accessories should only be obtained through your ADLINK dealer. For more information, see "Getting Service" on page 87.

# 2.3 Installing a Hard Disk Drive

Before installing hard disk drives, the HDD bracket must first be removed.

1. Remove thumbscrews fixing the HDD hatch.

![Close-up of a computer monitor rear panel showing CD-ROM drive buttons and a CFAST indicator (no readable text or symbols beyond labels)](.mxe-1400-50-1z192-2010-250-en/08f601185b6d80827179b2b79585703f7aafb49bd122fa269a4d1da2b3b8db0c.jpg)

2. Withdraw the HDD bracket.

![Close-up of a mechanical component with a red arrow pointing to a component, no visible text or symbols.](.mxe-1400-50-1z192-2010-250-en/0e2c22a9b651b41fd7462a3e887c2553f9319024eee547c2b9b3d70f588fa06f.jpg)

3. Place the HDD or SSD into the bracket.

![P/N: 92-99056-7010\nModel: ASD26-MT1032-CT\n5V/002450103053\nFM: 8A51B04 HW: 01\n1214\nSSD Solid State Drive\nPower: DC === 5V 1.0A\nADLINK\nTECHNOLOGY INC.\nwww.adlinktech.com\nWARNING DELCATE PRODUCT SENSITIVE PARTS INSIDE, DAMAGE MAY OCCUR IF SHOCED,\nTHUCHING THE CIRCUITS MAY CAUSE INFUNCTION, REMOVAL OF THIS COVER SHALL YOU\nANY AND ALL WARRANTIES.\nCAPS VA\nS003\nFZ24000023H-A W/O-03\nWARRANT\nIF BHA](.mxe-1400-50-1z192-2010-250-en/727926933835b80f1a08763dd995625fed9aaff092057459e3abdef401d0fb44.jpg)

4. Use the 4 provided M3 screws to fix the unit to the bracket.

![SSD\nSolid-2nd Drive\nPower DC = 8V/1A\nADLINK\nRL GS\n(CEPC)\nMAPS VA\nS003](.mxe-1400-50-1z192-2010-250-en/0141cfc7b694715a0568c198e33d4f604f50d3f6c4b0ffb178e1149848caee99.jpg)

5. Gently slide the bracket back into the bay until the SATA connector on the PCB is engaged.

6. Refasten the thumbscrews.

# 2.4 Installing a Mini-PCIe Device

Remove the bottom cover before installing.

1. Remove 6 bottom screws.

![Front view of a gray server rack with multiple ports and mounting holes, marked by red circles (no visible text or symbols)](.mxe-1400-50-1z192-2010-250-en/582b77a8aece762521feec240bd6ec9d1de64cea6bf0589724927c9bb05fbd38.jpg)

2. Remove 4 side screws (2 from each side).

![Close-up of a gray electronic device casing with two red circular markers highlighting the mounting points (no text or symbols visible)](.mxe-1400-50-1z192-2010-250-en/477d0447374535b9405e6c75787c8d02d64c6262cc322df4b1a25cdc82c99704.jpg)

# 3. Lift the bottom cover

![Internal view of a computer rack with multiple connected ports and connectors, showing no readable text or symbols.](.mxe-1400-50-1z192-2010-250-en/11dfd0404e6ac1cb1424cdf6a820a2d1db3dfd7355f34516dd76ecf6032ab5f9.jpg)

# 4. Insert the mini-PCI-E wireless module into the slot at an angle.

![Close-up of an electronic circuit board with a green PCB and red arrows pointing to specific components (no readable text or symbols)](.mxe-1400-50-1z192-2010-250-en/774f68a29d63f5672e075c53946717bcf12b00cc53a84e84416d8e4dca530980.jpg)

# 5. Gently seat the mini-PCI-E wireless module and fix with the 4 M2.5-P-head-L5 screws.

6. Replace the cover and refasten the 10 screws.

# 2.5 Installing CFast Card

The MXE-1400 provides an external CFast socket to accommodate one CFast card for additional storage.

1. Remove the 2 screws and the CFast cover from the rear panel.

![CFast](.mxe-1400-50-1z192-2010-250-en/e03b038a18d2aa1df85c0de7e0396ab3408b1389c05f61c9b5f0bb92b96fd351.jpg)

2. Gently insert the CFast card into the CFast socket.

![Close-up of a metallic heating element with cooling fins and a red arrow pointing to a component (no text or symbols visible)](.mxe-1400-50-1z192-2010-250-en/71f82999b1b0f1b92337b906f8b1b4acbb3b411271bf55a5db5870c15b2ab167.jpg)

3. Replace the CFast cover and refasten the 2 screws.

# 2.6 Connecting DC power

![The image displays a red triangular warning sign featuring a white exclamation point in the center. Below the triangle is the text 'WARNING:' in black capital letters.](.mxe-1400-50-1z192-2010-250-en/112ea8dc114bc8cce9e1f33cc9f5e8b2d958ab2bc74717e7be4ecb0eb80e32b1.jpg)

Before introducing DC power to the MXE-1400, ensure the voltage and polarity provided are compatible with the DC input. Improper input voltage and/or polarity can be responsible for system damage.

The DC power input connector of the MXE-1400 utilizes V+, V-, and chassis ground pins, and accepts input voltage as shown previously.

1. Connect DC power.
2. Fix the DC connector using the 2 screws.

![Close-up of a green electrical connector with red wiring, mounted on a black computer interface panel (no visible text or symbols)](.mxe-1400-50-1z192-2010-250-en/cb66b88194e197930bc4758fa0545bfdfce20b97aa5c0685bbfdcdb7185ed9f7.jpg)

![V+\nGND\nV-\n9V~32V DC IN](.mxe-1400-50-1z192-2010-250-en/570033943c7365f67d2d5a9d00271675f09762f3e1f20f1dd7e3be84ad2ccd7f.jpg)

# 2.7 Wall-mounting the MXE-1400

The MXE-1400 is shipped with wall-mount brackets and accessory screws, with mounting procedures as follows.

![The image displays a white document icon with a folded upper-right corner and faint horizontal lines. A large red checkmark is superimposed on the document. Below the graphic, the text 'NOTE:' appears in black, uppercase letters.](.mxe-1400-50-1z192-2010-250-en/37093419bc3019a9fd35fb0745bd0a40fa36fe422d0a0debae3e4c2b943eb52a.jpg)

All dimensions shown are in millimeters (mm) unless otherwise stated.

![This is an image of a warning sign featuring a yellow triangle with a black border. Inside the triangle is a large black exclamation point. Below the triangle, the text 'CAUTION:' is printed in black capital letters.](.mxe-1400-50-1z192-2010-250-en/0f220d0931c966cfb895f19becfb8ddf649ad3c1cbcd8578a099fb43552b161e.jpg)

To sustain structural integrity, the device should not be wall-mounted with the rear panel on the bottom.

1. Remove the 4 plastic pads from the underside panel corners.

![Front view of a computer drive chassis with four red-circled ports and mounting holes (no visible text or labels)](.mxe-1400-50-1z192-2010-250-en/04524eb5cd06d82a071c63f20c7544c5e473e57455dc6f19565c4b3ec90f356c.jpg)

2. Use the 4 M4 screws shipped with the controller to fix the 2 wall-mount brackets, also included, to the chassis, according to the spacing dimensions of the screw holes and brackets, as shown.

![3D CAD model of an electronic device casing with mounting brackets and mounting holes (no text or symbols visible)](.mxe-1400-50-1z192-2010-250-en/8326146bd2df86fdee5ddb963545caeb45dffa8c9efad4546b52cb68ae6081c2.jpg)

![63\n140\n63\n222\n236\n66 126](.mxe-1400-50-1z192-2010-250-en/eb1cd732a1eb8551dca36286383ab7d7693324c85666bb750b1e998e4fc48b0f.jpg)

![5.2\n7.2\n25.2\n5.2\n10](.mxe-1400-50-1z192-2010-250-en/a68ae9b11f2ccfd5a68eacca0604fc70e2a9e0343762fa5fa255a0b98b0cf1f0.jpg)

3. Once final assembly as shown is complete, mount the MXE-1400 series controller on the wall via screw holes.

![3D CAD model of a rectangular electronic device housing with mounting flanges and mounting holes (no text or symbols visible)](.mxe-1400-50-1z192-2010-250-en/f7c07552253b973f35295dd2013509521f5d741a5c411818d1aee4dcaa519974.jpg)

# 2.8 Cooling Considerations

Heat-generating components of the MXE-1400 (such as CPU and PCH) are all situated on the top of the system. These components directly contact the heat sink via thermal pads and dissipate heat generated by the components. To maximize efficiency of heat dissipation, maintain a minimum of 2 inches (5cm) clearance on the top of the MXE-1400.

# 2.9 Driver Installation

Download requisite drivers, as follows, for your system from http://www.adlinktech.com and install.

▶ Audio
▶ Chipset
▶ Graphic
▶ LAN
▶ USB 3.0

This page intentionally left blank.

# Appendix A Watchdog Timer (WDT) & DI/O Function Libraries

This appendix describes use of the watchdog timer (WDT) function library for the MXE-1400.

The watchdog timer is a hardware mechanism provided to reset the system if the operating system or an application stalls. After starting, the watchdog timer in the application must be periodically reset before the timer expires. Once the watchdog timer expires, a hardware-generated signal is sent to reset the system.

DI/O provides input/output to support inter-device communications. Simple programming guides allow easy transmission of digital signals between the system and attached peripherals.

# A.1 WDT with API/Windows

Matrix WDT API library files and a demo program (incl. source code) can be downloaded from http://www.adlinktech.com.

To use the WDT function library for MXE-1400 series, include the header file matrix\_wdt.h and linkage library matrix\_wdt.lib in the C++ project.

# InitWDT

Initializes watchdog timer function of MXE-1400. InitWDT must be called before the invocation of any other WDT function.

@ Syntax

C/C++

BOOL InitWDT()

@ Parameters

None

@ Return code

TRUE if watchdog timer is successfully initialized.

FALSE if watchdog timer fails to initialize.

# SetWDT

Sets the timeout value of the watchdog timer. There are two parameters for this function to indicate the timeout ticks and unit. ResetWDT or StopWDT should be called before the expiration of watchdog timer, or the system will reset.

# @ Syntax

C/C++

BOOL SetWDT(BYTE tick, BYTE unit)

# @ Parameters

tick

Specify the number of ticks for watchdog timer. A valid value is 1 - 255.

unit

Specify the timeout ticks of the watchdog timer.

<table><tr><td>Value</td><td>Description</td></tr><tr><td>0</td><td>The unit for one tick is one second. For example, when one tick is specified as 100 and the unit as 0, the timeout value is 100 seconds.</td></tr><tr><td>1</td><td>The unit for one tick is one minute. For example, whenone tick is specified as 100 and the unit as 1, the timeout value is 100 minutes.</td></tr></table>

# @ Return codes

TRUE if timeout value of watchdog timer is successfully set.

FALSE if timeout value of watchdog timer is failed to set.

# StartWDT

Starts watchdog timer function. Once the StartWDT is invoked, the watchdog timer starts. ResetWDT or StopWDT should be called before the expiration of watchdog timer, or the system will reset.

# @ Syntax

C/C++

BOOL StartWDT()

# @ Parameters

None

# @ Return codes

TRUE if watchdog timer is successfully started.

FALSE if watchdog timer is failed to start.

# ResetWDT

Resets the watchdog timer. The invocation of ResetWDT allows restoration of the watchdog timer to the initial timeout value specified in SetWDT function. ResetWDT or StopWDT should be called before the expiration of the watchdog timer, or the system will reset.

# @ Syntax

C/C++

BOOL ResetWDT()

# @ Parameters

None

# @ Return codes

TRUE if watchdog timer is successfully reset.

FALSE if watchdog timer fails to reset.

# StopWDT

Stops the watchdog timer.

# @ Syntax

C/C++

BOOL StopWDT()

# @ Parameters

None

# @ Return codes

TRUE if watchdog timer is successfully stopped.

FALSE if watchdog timer fails to stop.

# A.2 DI/O with API/Windows

Matrix DI/O API library files and a demo program (incl. source code) are located on the included driver CD or downloaded from http://www.adlinktech.com.

To use the DI/O function library for MXE-1400 series, include the header file matrix\_dio.h and linkage library matrix\_dio.lib in the C++ project.

DI/O functions are as follows.

# GPIO\_Init

Reserves system resources for digital input/output API service. It is necessary to call this function before using other MXE-1400 DI/O functions.

@ Syntax

C/C++

I16 GPIO\_Init(void)

@ Parameters

None

@ Return code

```txt
NoError
ErrorOpenDriverFailed
ErrorDeviceIoctl
```

# GPI\_Read()

Reads the digital logic state of the digital input line..

@ Syntax

C/C++

I16 GPI\_Read(U16 \*pwState)

@ Parameters

pwState

Returns the digital logic state of MXE-1400 digital input channels 1 to 8 (bit 0 to 7)

# @ Return code

```txt
NoError
ErrorOpenDriverFailed
ErrorDeviceIoctl
```

# GPO\_Write()

Sets the digital logic state of the digital output line.

# @ Syntax

```txt
C/C++
I16 GPO_Write(U16 wState)
```

# @ Parameters

State

Sets the digital logic state of MXE-1400 digital output channels 1 to 8 (bit 0 to 7) to 0 or 1.

# @ Return code

```txt
NoError
ErrorOpenDriverFailed
ErrorDeviceIoctl
```

# GPO\_Read()

Reads the digital logic state of the digital output line.

# @ Syntax

```txt
C/C++
I16 GPO_Read(U16 *pwState)
```

# @ Parameters

pwState

Returns the digital logic state of MXE-1400 digital output channels 1 to 8 (bit 0 to 7).

# @ Return code

NoError

ErrorOpenDriverFailed

ErrorDeviceIoctl

# Appendix B BIOS Setup

![The image displays a graphic of a white document icon with a folded top-left corner and faint horizontal lines. A large, bold red checkmark is centered over the document.](.mxe-1400-50-1z192-2010-250-en/17ed49e3b85d91c491ff5ddc2c55a35b4b65a47f38130610d08a4c2ef1efd2e9.jpg)
NOTE:

BIOS options in the manual are for reference only, and are subject to configuration. Users are welcome to download the latest BIOS version from the ADLINK website.

The Basic Input/Output System (BIOS) is a program that provides a basic level of communication between the processor and peripherals. In addition, the BIOS also contains codes for various advanced features applied to the MXE-1400. The BIOS setup program includes menus for configuring settings and enabling features of the MXE-1400 series. Most users do not need to use the BIOS setup program, as the MXE-1400 ships with default settings that work well for most configurations.

![The image displays a red equilateral triangle containing a white exclamation point in its center. The graphic is set against a white background, with thin black lines visible along the top and left edges, framing the icon.](.mxe-1400-50-1z192-2010-250-en/2141dccb41d9921465e6a252d56f2a748d38616577d62e996b00ce8596c78f9f.jpg)
WARNING:

Changing BIOS settings may lead to incorrect controller behavior and possible inability to boot. In such a case, Section 1.8.1 on page 22 provides instruction on clearing the CMOS and restoring default settings

# B.1 Main

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.</td></tr><tr><td colspan="2">Main Advanced Chipset Security Boot Save &amp; Exit</td></tr><tr><td>BIOS Information
BIOS Vendor American Megatrends
Core Version 5.009
BIOS Version ADLINK MXE1400 0201
Board Version A02
System Language [English]
System Date [Mon 06/08/2015]
System Time [09:39:06]
Access Level Administrator</td><td>Choose the system default language</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.</td></tr></table>

# B.1.1 BIOS Information

Shows current system BIOS core version, BIOS version and Board version.

# B.1.2 System Time/System Date

Changes system time and date. Highlight System Time or System Date using the up or down &lt;Arrow&gt; keys. Enter new values using the keyboard then &lt;Enter&gt;. Use &lt;Tab&gt; to move between fields. The date must be entered in MM/DD/YY format. The time is entered in HH:MM:SS format.

![This image displays an icon featuring a white document with a folded top-right corner and faint horizontal lines. A large, bold red checkmark is superimposed over the document, angled diagonally from the bottom left to the top right.](.mxe-1400-50-1z192-2010-250-en/0de1866bf998746c1dcdbd3748abcae9639bc2ab3a1c1d4687f5ae1810cde60e.jpg)
NOTE:

The time is in 24-hour format, for example, 5:30 A.M. appears as 05:30:00, and 5:30 P.M. as 17:30:00.

# B.2 Advanced

![Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.\nMain Advanced Chipset Security Boot Save & Exit\nCPU Configuration\nMemory Configuration\nOnboard devices configuration\nAdvanced Power Management\nSATA Configuration\nSerial Port Console Redirection\nCSM Configuration\nSystem Management (SEMA)\nCPU Configuration Parameters\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit\nVersion 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.](.mxe-1400-50-1z192-2010-250-en/f8fde56002cc6a72f39da15da7309f89513ef1809947673e7c42758315ed536a.jpg)

![This image displays a standard warning sign featuring a yellow triangle with a black border containing a large black exclamation point. Below the triangle is the word 'CAUTION:' in black, capital letters.](.mxe-1400-50-1z192-2010-250-en/7a9dd786365307a863f37d87585193a9fa0e6d8540c55264a6e6477a6f85b286.jpg)

Setting incorrect or conflicting values in Advanced BIOS Setup may cause system malfunction.

# CPU Configuration

![Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.\nAdvanced\nCPU Signature	30679\nMicrocode Patch	901\nCPU Speed	1918 MHz\nMax CPU Speed	1918 MHz\nMin CPU Speed	500 MHz\nProcessor Cores	4\nIntel HT Technology	Not Supported\nIntel VT-x Technology	Supported\n64-bit	Supported\nL1 Data Cache	24 kB x 4\nL1 Code Cache	32 kB x 4\nL2 Cache	1024 kB x 2\nL3 Cache	Not Present\nLimit CPUID Maximum	(Disabled)\nExecute Disable Bit	(Enabled)\nHardware Prefetcher	(Enabled)\nAdjacent Cache Line Prefetch	(Enabled)\nIntel Virtualization Technology	(Enabled)\nEIST	(Enabled)\nCPU C state Report	(Enabled)\nCPU CIE state support	(Enabled)\nMax CPU C-state	( C7)\nDisabled for Windows XP\n+: Select Screen\n↑1: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit\nVersion 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.](.mxe-1400-50-1z192-2010-250-en/d128da2c91fe5312178b53f080008450ba3e2f3fc3633a7d8014733ca838b947.jpg)

# Hyper-Threading

Enabled for OS optimized for Hyper-Threading Technology and disabled for those not optimized. When disabled only one thread per enabled core is enabled

# Active Processor Cores

Number of cores to enable in each processor package.

# Limit CPUID Maximum

Limits the CPUID return value, should be disabled in older OS to avoid system error.

# Execute Disable Bit

Can prevent certain classes of malicious buffer overflow.

# Intel Virtualization Technology

When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology

# Hardware Prefetcher

Enables/disables the Mid Level Cache (L2) streamer prefetcher

# Adjacent Cache Line Prefetch

Enables/disables prefetching of adjacent cache lines.

# CPU AES

Enables/Disables CPU Advanced Encryption Standard instructions.

# EIST

Enables/disables Intel SpeedStep Technology.

# Turbo Mode

Enables/disables Intel TurboBoost Technology.

# Energy Performance

Optimizes performance/power saving ratio.

# CPU C state

Enables/disables CPU C states

# Package C State limit

CPU Package C State limit.

# ACPI CTDP BIOS

Enables/Disables ACPI CTDP BIOS support.

# Configurable TDP Level

Allows reconfiguration of TDP levels based on current power and thermal delivery capabilities of the system.

# Config TDP Lock

Locks the Config TDP Control register.

# TCC Activation Offset

Offset from the factory TCC activation temperature

# Intel TXT (LT) Support

Enables/Disables Intel $^{®}$ TXT(LT) support.

# Memory Configuration

![Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.\nAdvanced\nMemory Configuration\nTotal Memory 4096 MB (LPDDR3)\nMemory Slot0 4096 MB (LPDDR3)\nMemory Slot1 Not Present\n++: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit\nVersion 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.](.mxe-1400-50-1z192-2010-250-en/caf0d4303566246af46062b5f7251f0acf6b2aff2a5b4e57ae268b75b112c321.jpg)

# Memory Frequency Limiter

Maximum memory frequency, set in MHz.

# Memory Remap

Enables/Disables memory remap over 4G.

# Onboard Device Configuration

Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Onboard devices configuration
Serial Port Configuration
COM1 Device Settings    IO=3F8h; IRQ=4;
COM1 Control    [RS232]
COM2 Device Settings    IO=2F8h; IRQ=3;
COM2 Control    [RS232]
COM3 Device Settings    IO=3E8h; IRQ=5;
COM3 Control    [RS232]
COM4 Device Settings    IO=2E8h; IRQ=7;
COM4 Control    [RS232]
Lan Port Configuration
LAN #1 (Intel I211)    [Enabled]
LAN #1(I211) Launch PXE OpROM    [Disabled]
LAN #2 (Intel I211)    [Enabled]
LAN #2(I211) Launch PXE OpROM    [Disabled]
LAN #3 (Intel I211)    [Enabled]
LAN #3(I211) Launch PXE OpROM    [Disabled]

SATA Configuration
SATA Controller(s)    [Enabled]

USB Configuration
USB Devices:
    1 Drive, 1 Keyboard, 1 Mouse, 4 Hubs

Select COM1 mode. RS232, RS422 or RS485

+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.

# COM1 Control

Select COM1 mode from among RS232, RS422 or RS485.

# COM2 Control

Select COM2 mode from among RS232, RS422 or RS485.

# LAN #1 (Intel I217)

Enables/disables onboard Intel I217 LAN controller.

# Launch PXE OpROM

Enables/Disables execution of LAN boot-rom to add boot option for legacy network devices.

# LAN #2 (Intel 210)

Enables/Disables onboard Intel 210 LAN controller.

# Launch PXE OpROM

Enables/Disables execution of LAN boot-rom to add boot option for legacy network devices.

# LAN #3 (Intel 210)

Enables/disables onboard Intel 210 LAN controller.

# Launch PXE OpROM

Enables/disables execution of LAN boot-rom to add boot option for legacy network devices.

# LAN #4 (Intel 210)

Enables/disables onboard Intel 210 LAN controller.

# Launch PXE OpROM

Enables/disables execution of LAN boot-rom to add boot option for legacy network devices.

# SATA Controller(s)

Enables/disables SATA Device.

# Legacy USB Support

AUTO option disables legacy support if no USB devices are connected, DISABLE option keeps USB devices available only for EFI applications.

# USB 3.0 Support

Enables/Disables USB 3.0 (XHCI) controller support, allowing

USB 3.0 devices to be used in DOS environment.

# XHCI Hand-Off

Enables BIOS support of XHCI Hand-Off feature. Default option is Enabled.

# Advanced Power Management

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Advanced</td></tr><tr><td rowspan="2">Advanced Power Management
Restore AC Power Loss [Power Off]
Make System With Fixed Time [Disabled]
Make On Ring [Disabled]
BIOS POST Watchdog [Disabled]</td><td>Select AC power state when power is re-applied after a power failure.</td></tr><tr><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.</td></tr></table>

# Restore On AC Power Loss

Determines the state entered when power is restored after a power loss, from among Last State, Power On, and Power Off.

<table><tr><td>Power Off</td><td>When set, powers the system down when power is restored.</td></tr><tr><td>Power On</td><td>When set, powers the system on when power is restored.</td></tr><tr><td>Last State</td><td>When set, powers the system down or on depending on the last system power state when power is restored.</td></tr></table>

Table B-1: Restore On Power Loss Settings

# Wake System With Fixed Time

Enables/Disables System Wake on Alarm event. When enabled, system will wake at the hr::min::sec specified.

# Wake On Ring

Disables/Enables RI ping for Wake On Ring function.

# OS Watchdog

Enables/Disables OS Watchdog.

# BIOS POST Watchdog

Sets watchdog timer for BIOS POST process.

# SATA Configuration

<table><tr><td rowspan="2">SATA Configuration
SATA Mode [AHCI]
SATA Port [Enabled]
CF Card [Enabled]
SATA Port Not Present
CF Card Not Present</td><td>Select IDE / AHCI</td></tr><tr><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.</td></tr></table>

# SATA Mode Selection

Allows selection of the SATA channel configuration from among (1) IDE Mode, (2) AHCI Mode, or (3) RAID Mode.

# SATA Port 0 / SATA Port 1 / CFAST Card / eSATA / mSATA / mSATA

Port X: Enables or disables SATA Port X

Hot Plug: Sets the port as hot pluggable.

# Serial Port Console Redirection

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Advanced</td></tr><tr><td>Serial Port Console RedirectionCOM1Console Redirection [Disabled]▶ Console Redirection SettingsSerial Port for Out-of-Band Management/Windows Emergency Management Services (EMS)Console Redirection [Disabled]Out-of-Band Mgmt Port [COM1]Terminal Type [VT-UTF8]Bits per second [11S200]Flow Control [None]Data Bits 8Parity NoneStop Bits 1</td><td>Console Redirection Enable or Disable.+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF2: Previous ValuesF3: Optimized DefaultsF4: Save &amp; ExitESC: Exit</td></tr><tr><td colspan="2">Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.</td></tr></table>

# COM1 COM Console Redirection

Enables/disables Console Redirection of COM1, from [Disabled (Default)/ Enabled]

Enabled:

Console Redirection Settings

Terminal Type

Selects transmission protocol for the remote terminal console from VT100/ VT100+/ VT-UTF8/ ANSI (Default)]

VT100

ASCII char set.

VT100+

Extends VT100 to support color, function keys, etc.

VT-UTF8

Uses UTF8 encoding to map unicode chars onto 1 or more bytes.

ANSI

Extended ASCII char set.

Bits per second

Selects serial port transmission speed, which must be matched on the other side, with long or noisy lines possibly requiring lower speeds, from [9600/ 19200/ 57600/ 115200 (Default)]

Data Bits, from [7/8 (Default)]

Parity

A parity bit can be sent with the data bits to detect some transmission errors, from [None (Default)/ Even/ Odd/ Mark/ Space]

Even

Parity bit is 0 if the num of 1's in the data bits is even.

Odd

Parity bit is 0 if num of 1's in the data bits is odd.

Mark

Parity bit is always 1.

Space

Parity bit is always 0.

Mark and Space Parity do not allow for error detection. They can be used as an additional data bit.

Stop Bits

Stop bits indicate the end of a serial data packet. (A start bit indicates the beginning). The standard setting is 1 stop bit.

Communication with slow devices may require more than 1 stop bit, from [1 (Default)/ 2]

# Flow Control

Flow control can prevent data loss from buffer overflow, from [None (Default)/ Hardware RTS/ CTS]

# Recorder Mode

When enabled only text will be sent, to capture Terminal data, from [Disabled (Default)/ Enabled]

# Resolution 100x31

Enables or disables extended terminal resolution, from [Disabled (Default)/ Enabled]

# Legacy OS Redirection Resolution

On Legacy OS, the Number of Rows and Columns supported redirection, from [80x24 (Default)/ 80x25]

# Putty KeyPad

Select Function Key and KeyPad on Putty, from [VT100 (Default)/ LINUX/XTERMR6/SCO/ESCN/VT400]

# Redirection After BIOS POST

Specify if BootLoader is selected then Legacy console redirection is disabled before booting to Legacy OS. Default value is always Enable which means legacy console redirection is enabled for legacy OS, from [Always Enable (Default)/Boot-Loader]

# (EMS) Console Redirection

Enables/disables Console Redirection of Out-of-Band Mgmt Port, from [Disabled (Default)/ Enabled]

# Out-of-Band Mgmt Port

Microsoft Windows Emergency Management Services (EMS) allows remote management of a Windows Server OS through a serial port, from [COM1(Disable)(Default)/COM1(Pci Bus8,Dev0,Func0)]

# Terminal Type

Selects transmission protocol for the remote terminal console from [VT100/ VT100+/ VT-UTF8 (Default)/ ANSI]

# Bits per second

Selects serial port transmission speed, which must be matched on the other side, with long or noisy lines possibly requiring lower speeds, from [9600/ 19200/ 57600/ 115200 (Default)]

# Flow Control

Can prevent data loss from buffer overflow, from [None (Default)/ Hardware RTS/ CTS]

# CSM Configuration

Compatibility Support Module to support legacy Option ROM binaries and OS requiring a legacy BIOS runtime interface.

<table><tr><td colspan="2">Optio Setup Utility - Copyright (C) 2013 American Megatrends, Inc. Advanced</td></tr><tr><td>CSM Configuration</td><td></td></tr><tr><td>CSM16 Module Version</td><td>07.75</td></tr><tr><td>GateA20 Active</td><td>[Upon Request]</td></tr><tr><td>Option ROM Messages</td><td>[Force BIOS]</td></tr><tr><td>INT19 Trap Response</td><td>[Immediate]</td></tr><tr><td>Boot option filter</td><td>[UEFI and Legacy]</td></tr><tr><td>Option ROM execution</td><td></td></tr><tr><td>Network</td><td>[Do not launch]</td></tr><tr><td>Storage</td><td>[Do not launch]</td></tr><tr><td>Other PCI devices</td><td>[Legacy]</td></tr></table>

# GateA20 Active

Switches memory access mode for compatible old and new OSs, from [Upon Request (Default)/Always]

Upon Request

GateA20 can be disabled using BIOS services.

Always

Disallows disabling of GateA20, for when any RT code is executed above 1MB.

# Option ROM Messages

Sets display mode for Option ROM, whether Option ROM information is displayed during boot, from [Force BIOS (Default)/Keep Current]

# INT19 Trap Response

BIOS reaction on INT19 trapping by Option ROM, from [Immediate (Default)/ Postponed]

Immediate

Executes trap immediately.

Postponed

Executes trap during legacy boot.

# Boot option filter

Controls to what devices system can boot, from [UEFI and Legacy (Default)/ Legacy only/ UEFI only]

# Launch Network OpROM policy

Controls the execution of UEFI and Legacy PXE OpROM, from [Do not launch(Default)/ UEFI only / Legacy only]

# Launch Storage OpROM policy

Controls execution of UEFI and Legacy Storage OpROM, from [Do not launch(Default)/ UEFI only/ Legacy only]

# Other PCI device ROM priority

For PCI devices other than Network, Mass storage, or Video, defines the OpROM to launch, from [UEFI only / Legacy only(Default)]

# System Management (SEMA)

HW monitoring information from ADLINK Smart Embedded Management Agent (SEMA)

<table><tr><td colspan="2">System Information</td></tr><tr><td>SMC Bootloader</td><td>b1_ABX-1401 4v0</td></tr><tr><td>SMC Firmware</td><td>BMC ABX-1401 0v2</td></tr><tr><td colspan="2">Temperatures</td></tr><tr><td colspan="2">Board Temperatures</td></tr><tr><td>- Current</td><td>32 C</td></tr><tr><td>- Startup</td><td>24 C</td></tr><tr><td>- Min</td><td>20 C</td></tr><tr><td>- Max</td><td>47 C</td></tr><tr><td colspan="2">Power Consumption</td></tr><tr><td>CPU-Vcore</td><td>0.800 V</td></tr><tr><td>GFX-Vcore</td><td>0.896 V</td></tr><tr><td>V5.00</td><td>4.955 V</td></tr><tr><td>Vmem</td><td>1.364 V</td></tr><tr><td>VBAT</td><td>2.887 V</td></tr><tr><td>V3.30</td><td>3.264 V</td></tr><tr><td>V12.00</td><td>11.729 V</td></tr><tr><td>VIN</td><td>23.561 V</td></tr><tr><td colspan="2">Runtime Statistics</td></tr><tr><td>Total Runtime</td><td>129 h 13 min</td></tr><tr><td>Current Runtime</td><td>00 h 04 min 24 sec</td></tr><tr><td>Power Cycles</td><td>758 cycles</td></tr></table>

Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.

# B.3 Chipset

![Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.\nMain Advanced Chipset Security Boot Save & Exit\nUSB Configuration\nHigh Precision Timer (Enabled)\nIntel IGD Configuration\nIntegrated Graphics Device (Enabled)\nIGD Turbo Enable (Enabled)\nPrimary Display (IGD)\nGFX Boost (Disabled)\nDVMT Pre-Allocated (64M)\nDVMT Total Gfx Mem (256MB)\nAperture Size (256MB)\nUSB Configuration Settings\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit\nVersion 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.](.mxe-1400-50-1z192-2010-250-en/405dc60be77a5004e77e3bd94fb0ce4c74aee9d9ff0ac720869a78e042e3b49a.jpg)

# USB Configuration

![Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.\nMain Advanced Chipset Security Boot Save & Exit\nUSB Configuration\nHigh Precision Timer (Enabled)\nIntel IGD Configuration\nIntegrated Graphics Device (Enabled)\nIGD Turbo Enable (Enabled)\nPrimary Display (IGD)\nGFX Boost (Disabled)\nDVMT Pre-Allocated (64M)\nDVMT Total Gfx Mem (256MB)\nAperture Size (256MB)\nUSB Configuration Settings\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit\nVersion 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.](.mxe-1400-50-1z192-2010-250-en/cc1730cda6ba380a13aacd11c6a44cfbb78412635802128f74ec54e07e45ae31.jpg)

# XHCI Mode

xHCI controller mode of operation, from [Enabled/ Disabled/Auto (Default)/ Smart Auto]

# USB 2.0 (EHCI) Support

Controls the USB EHCI (USB 2.0) functions, wherein one EHCI controller must always be enabled, from [Disabled (Default)/Enabled]

# High Precision Timer

Enables/disables High Precision event timer, from [Enabled (Default)/Disabled]

# Intel IGD configuration

# Integrated Graphics Device

[Enabled (Default)/Disabled]

When Enabled, Integrated Graphics Device (IGD) is the Primary Video Adaptor

# IGD Turbo Enable

Enables/disables IGD Turbo, from [Enabled (Default)/Disabled]

# Primary Display

Select the IGD/PCI Graphics device to be Primary Display, from [Auto/IGD (Default)/PCI]

# GFX Boost

Enables/disables GFX Boots from [Enabled/Disabled (Default)]

# DVMT Pre-Allocated

Selects DVMT 5.0 pre-allocated (fixed) graphics memory size used by the internal graphics device, from [64MB (Default)/96MB/128MB/160MB/192MB/224MB/256MB/288MB/320MB/352MB/384MB/416MB/448MB/480MB/512MB]

# DVMT Total Gfx Mem

Sets DVMT5.0 total graphic memory size used by the Internal Graphics Device, from [128MB/ 256MB (Default)/ MAX]

# Aperture Size

Selects aperture size, from [128MB/ 256MB (Default)/ 512MB]

# B.4 Security

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.</td></tr><tr><td colspan="2">Main Advanced Chipset Security Boot Save &amp; Exit</td></tr><tr><td>Password DescriptionIf ONLY the Administrator&#x27;s password is set,then this only limits access to Setup and isonly asked for when entering Setup.If ONLY the User&#x27;s password is set, then thisis a power on password and must be entered toboot or enter Setup. In Setup the User willhave Administrator rights.The password length must bein the following range:Minimum length 3Maximum length 20Administrator PasswordUser PasswordBIOS Read/Write Protection [Disabled]</td><td>Set Administrator Password+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF2: Previous ValuesF3: Optimized DefaultsF4: Save &amp; ExitESC: Exit</td></tr></table>

If only the Administrator's password is set, only access to Setup is limited and the password only requested when entering Setup. If only the user's password is set, power on requires a password which must be accepted to boot or enter setup. In Setup the user has Administrator rights.

# Administrator Password

Sets Administrator password

# User Password

Sets boot/setup User password

# BIOS Read/Write Protection

Allows only OEM proprietary utility update, from [Enabled/Disabled (Default)]

# B.5 Boot

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.</td></tr><tr><td colspan="2">Main Advanced Chipset Security Boot Save &amp; Exit</td></tr><tr><td>Boot Configuration
Setup Prompt Timeout 1
Bootup NumLock State [On]</td><td></td></tr><tr><td>Quiet Boot [Enabled]
Fast Boot [Disabled]</td><td></td></tr><tr><td>Boot Option Priorities
Boot Option #1 [UEFI: Generic Flash...]
Boot Option #2 [Generic Flash Disk ...]</td><td></td></tr><tr><td>Hard Drive BBS Priorities</td><td></td></tr><tr><td></td><td>Number of seconds to wait for setup activation key.
65535(0xFFFF) means indefinite waiting.</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.</td></tr></table>

# Boot Configuration

# Setup Prompt Timeout

Number of seconds to wait for setup activation key (DEL).

# Bootup Num-Lock State

Allows Number Lock setting to be modified during boot.

# Quiet Boot

When Disabled, directs BIOS to display POST messages. When Enabled, directs BIOS to display the OEM logo.

# Fast Boot

Enables or disables boot with initialization of a minimal set of devices required to launch active boot option. Has no effect on BBS boot options.

# Boot Option Priorities

Specifies the priority of boot devices, with all installed boot devices detected during POST displayed. Boot Option # specifies the desired boot device.

# B.6 Exit

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.</td></tr><tr><td>Main Advanced Chipset Security Boot Save &amp; Exit</td><td></td></tr><tr><td>Discard Changes and Exit
Save Changes and Reset
Discard Changes
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
UEFI: Generic Flash Disk 8.07
Generic Flash Disk 8.07
Launch EFI Shell from filesystem device</td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.</td></tr></table>

# Discard Changes and Exit

Exits system setup without saving any changes

# Save Changes and Reset

Resets the system after saving the changes

# Discard Changes

Discards changes made to any of the Setup options.

# Restore Defaults

Returns all BIOS options to default settings, designed for maximum system stability, but not performance. Applicable in the event of system configuration problems.

# Save as User Defaults

Saves changes made as User Defaults

# Restore User Defaults

Restores User Default settings to all Setup options

Launch EFI Shell from filesystem device

This page intentionally left blank.

# Appendix C SEMA Utility GUI

The SEMA graphical interface is available for Windows operating systems. To get started in Windows, simply run SEMAGui.exe

# C.1 System Overview Tab

![SEMA - Smart Embedded Management Agent - 2.5 R4\nAbout\nOverview	System Health	User Flash	Hardware Controls	Hardware Monitor	I2C Bus	GPIO\nBoard Information\nBIOS Revision	0103\nBMC Firmware	BMC ABX-1401 0v2 Dec 29 2014\nBMC Bootloader	bl_ABX-1401 4v0 Dec 23 2014 (c) ADLINK Technology Inc.\nBoard ID	BMC ABX-1401 0v2 Dec 29 2014 (c) ADLINK Technology Inc.\nHardware Revision\nSerial Number\nManufacturing Date\nLast Repair Date\nMAC ID\nSEMA Features	Uptime counter, Restart event, 1k User Flash, Watchdog, PowerUp Watchdog,\nTemp Sense, LVDS Backlight, Current Sense, Boot counter, Extern I2C 4,\nSmart Fan System #1\nAdLINK TECHNOLOGY INC.\nSEMA\nExit\nBIOS Ok!](.mxe-1400-50-1z192-2010-250-en/94d5250549d646315dde13e5d3cf3ea5a74453b9f765d5b8952c1513c0b6e3c0.jpg)

# C.1.1 Board Information

This section shows general information about the board, BIOS Version and SEMA features supported. The first three lines show the firmware versions of the board. The BMC versions each contain an ID-string and the respective build date. The next lines show the board ID, hardware revision, serial number, manufacturing/repair date and MAC ID of the board. The last line shows all supported SEMA features for this board.

# C.2 System Health Tab

![SEMA - Smart Embedded Management Agent - 2.5 R4\nAbout\nOverview	System Health	User Flash	Hardware Controls	Hardware Monitor	I2C Bus	GPIO\nTemperatures & Fan Speed\nCurrent	Startup	Min	Max\nCPU	42.0°C	N/A	N/A	N/A\nBoard	42°C	25°C	0°C	0°C\nCPU Fan Speed	N/A\nSystem Fans Speed	0RPM	0RPM	0RPM\nPower Consumption\nCurrent	Average over	255s\nInput current	0mA	10mA\nInput Power	0W	0.12W\nRuntime Statistics\nTotal Runtime	51715733h 20m\nCurrent Runtime	908127h 40m 35s\nPower Cycles	3084\nBoot Cycles	0\nBoot Reason	Software Reset\nFlags & Status\nBMC Flags	0x40\n- BIOS Select	N/A\n- ATX/AT Mode	N/A\n- Exception Code	0x00\nBMC Status	0x00\nClear\nADLINK TECHNOLOGY INC.\nSEMA\nExit\nBIOS Ok!](.mxe-1400-50-1z192-2010-250-en/b8322fee5fc6f52db27e78fd5d57dd24d646415868c669456124f0462add349b.jpg)

# C.2.1 Temperatures & Fan Speed

This section displays the current, start-up, minimum and maximum temperatures of the CPU and environment (board). The data is displayed in °C and updated every second. Current CPU and speeds of system fans 1 to 3 are also displayed in RPM. Note that not all platforms supply all information as shown, in which case N/A is displayed in lieu of the value.

# C.2.2 Power Consumption

Displays information for the main power supply in mA for current and W for power consumption, and are updated every second. To filter out spikes and acquire average values over a certain interval of time, a second/sample value can be selected from 0 to 255. Averaging takes place within the graphical user interface rather than within the BMC itself. The application collects the selected number of samples and present an average thereof. Note that not all platforms may provide the necessary current sensors, in which case N/A is displayed and the section will grayed out.

# C.2.3 Runtime Statistics

<table><tr><td>Total</td><td>Total system uptime in hours and minutes</td></tr><tr><td>Current</td><td>Uptime since last boot in hours, minutes and seconds</td></tr><tr><td>Power cycles</td><td>Number of power cycles</td></tr><tr><td>Boot cycles</td><td>Number of HW/SW-Resets and successful power-ups</td></tr><tr><td>Boot reason</td><td>Reason for the last reboots (e.g. power loss, power down, HW reset, etc.)</td></tr></table>

# C.2.4 Flags

Display board-specific information about the internal status of the BMC. Please refer to the technical manual for the board, the chapter entitled “SEMA functions”. Also provided is information regarding the currently active BIOS, whether the system is in AT or ATX mode, and Exception Codes, if applicable.

# C.3 User Flash Memory Tab

![The image displays a simple icon of a white document with a folded top-right corner. Horizontal gray lines run across the document to represent text. A large, red checkmark is superimposed over the document.](.mxe-1400-50-1z192-2010-250-en/05f9dfe7d3b6a5f7a67faeada906e455aaa674ebb69bc87b06e133796e5d46f8.jpg)
NOTE:

The Read/Write Raw Data Storage in SEMA Flash Memory function is reserved for advanced SEMA applications.

The Read/Write Raw Data Storage in SEMA Flash Memory function is reserved for advanced SEMA applications.

![SEMA - Smart Embedded Management Agent - 2.5 R4\nAbout\nOverview	System Health	User Flash	Hardware Controls	Hardware Monitor—I2C Bus	GPIO\nRead	Address 0x 0	Size 0x 0100\nWrite\nClear\nAddress	00	01	02	03	04	05	06	07	08	09	0A	0B	0C	0D	0E	0F	ASCII\n0x0000	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	............\n0x0010	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	............\n0x0020	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	............\n0x0030	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	............\n0x0040	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	............\n0x0050	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	............\n0x0060	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	............\n0x0070	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	............\n0x0080	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	............\n0x0090	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	............\n0x00A0	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	............\n0x00B0	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF	FF_............\n0x00C0	FF	FF	FF	FF_ FF_ FF_ FF_ FF_ FF_ FF_ ............\n0x00D0	FF_ FF_ FF_ FF_ FF_ FF_ FF_ FF_ FF_ FF_ FF_ FF_ ............\n0x00E0			F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F\n0x00F0			F F F F F E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E E\nADLINK TECHNOLOGY INC.\nSEMA\nExit\nBIOS Ok!](.mxe-1400-50-1z192-2010-250-en/dc410b26733e5493496d0cb34685661d749e62e57f4eaf1770287d0f2883f700.jpg)

# C.3.1 Memory

For Flash Memory organization, with address and size entered as hexadecimal values. Valid start addresses are multiples of 16 within the range: 0x0000-0x01F0 for 512 byte variants and 0x0000-0x03F0 for 1024 byte variants. Size can be any multiple of 16 bytes (up to the total memory size).

For example, to display the first 32 bytes from user flash memory, enter "0000" as address, "20" (hex 20 equals decimal 32) as size and press the [Read] button. Content is acquired from the BMC and displayed in the output window.

Each line contains the address of the first byte of this line, followed by 16 data bytes (displayed as hexadecimal values, with prefixes "0x" omitted for clarity) followed by the corresponding printable ASCII characters. The [Write] button opens the Write memory dialog box.

# C.3.2 Write Memory

![Write Flash Memory\nAddress 0x 0000\nSize Auto\nPadding SPACE\nData mode\nString\nHex\nOK Cancel](.mxe-1400-50-1z192-2010-250-en/8bf08f50e1321d80823f6d82729c3903760527af1c33bd21966a4c91246a612f.jpg)

# Address

The address is entered as hexadecimal value within the range of 0x0000..0x01FC (respectively 0x03FC for 1k board variants)

# Size

Can be any multiple of four, up to 32 bytes or "Auto". In Auto mode, the number of bytes to write is determined by the amount of data entered in the subsequent data field (max 32 bytes).

# Padding

If the data length is not a multiple of four, the required number of pad (or fill) characters is appended. In String mode, a valid pad character can be any printable ASCII character or a predefined pad characters: - SPACE character (ASCII character 0x20) - NULL character (ASCII character 0x00) In Hex mode, any eight bit hex value (00..FF) is valid.

# Data Mode

Currently supported modes are String mode, in which entered text (up to 32 characters) is converted to a byte stream, with no termination character appended, and Hex mode, in which up to 64 hex digits (0 to 9, A to F) can be entered, resulting in up to 32 bytes of data.

# C.4 Hardware Control Tab

![SEMA - Smart Embedded Management Agent - 2.5 R4\nAbout\nOverview	System Health	User Flash	Hardware Controls	Hardware Monitor	I2C Bus	GPIO\nEnable Watchdog\nWatchdog\nTimeout	0s	Set\nPower Up Watchdog\nTimeout	10s	Set\nLVDS Backlight Control\n255\nDark	Bright\n○ BMC\n● I2C\nSmart Fan\nCPU Fan\nSystem Fan #1\nSystem Fan #2\nSystem Fan #3\nTrigger Settings\nAuto	Trigger Temp.	PWM Level\nFan On	Trigger Point 1	0°C	0%\nFan Off	Trigger Point 2	0°C	0%\nTrigger Point 3	0°C	0%\nTrigger Point 4	0°C	0%\nRead Values	Start Values\nTemperature Source\nBoard Temp.\nCPU Temp.\nADLINK TECHNOLOGY INC.\nSEMA\nExit\nBIOS Ok!](.mxe-1400-50-1z192-2010-250-en/910b0e12f0200a23898af6ad5481e831079af825759cb64708e63ae1f1a1daa2.jpg)

# C.4.1 Watchdog

The watchdog timeout value is given in seconds and can be set at 1 to 65535 seconds, with a value of 0 seconds disabling the watchdog. When enabled, the watchdog should be triggered repeatedly within the timeout period to avoid system reset. Note that not all platforms support watchdog functionality, in which case the section is grayed out.

![The image displays a white document icon with faint horizontal lines representing text. A large, bold red checkmark is superimposed over the center of the document.](.mxe-1400-50-1z192-2010-250-en/1ba39ac2465b968d806a83de26f72c49b621bc4663224ffefeb884430dbc46b5.jpg)
NOTE:

▶ When using the watchdog feature, all partitions must be mounted as read-only, to avoid file system corruption and data loss.
It is not advisable to use the watchdog feature in a Windows environment, since Windows restart uses a safe shutdown procedure.

# C.4.2 Backlight Control

Enables or disables the backlight of display connected via LVDS, with value adjusted by a slider or entered as a numerical, from 0 to 255. Note that not all platforms support the necessary circuitry, in which case the section is grayed out. Radio boxes allow selection of control by BMC or LVDS I2C interface.

# C.4.3 Smart Fan

Provides control of either CPU or system fans (if applicable). The accessible system is also listed in SEMA Features in the System Overview Tab or via the "sema cap" command line

All fans can have a discrete independent temperature source defining the temperature sensor used for calculating speed.

Settings are as shown

<table><tr><td>Setting</td><td>Function</td></tr><tr><td>Auto</td><td>No other settings required</td></tr><tr><td>Off</td><td>Fan is disabled</td></tr><tr><td>On</td><td>Fan runs at maximum speed</td></tr></table>

Trigger Temp and PWM Level determine the characteristic curve of the fan control. Sample settings as shown result in fan function as follows.

<table><tr><td>Temperature</td><td>Fan PWM level</td></tr><tr><td>Falls below 15°C</td><td>Turns off</td></tr><tr><td>Between 15°C and 60°C</td><td>30%</td></tr><tr><td>Between 40°C and 70°C</td><td>40%</td></tr><tr><td>Between 48°C and 80°C</td><td>63%</td></tr><tr><td>Exceeds 55°C</td><td>100%</td></tr></table>

![The image displays a simple icon of a white document or piece of paper with a folded top-left corner. Inside the document, there are faint horizontal lines resembling a list or notepad. Superimposed over the document is a large, bold red checkmark (or tick mark) angled from the bottom left to the top right.](.mxe-1400-50-1z192-2010-250-en/2481cb3e8c330c06984505bcfc72446b67eabee6ebd5769a21679bd3eb43db9e.jpg)
NOTE:

If the temperature drops below one of the trigger points, the lower PWM value is taken.

# C.5 Hardware Monitor Tab

Shows Power Consumption and Temperatures information from the System Health Tab in a graphical format.

![| Parameter       | Value     |\n| --------------- | --------- |\n| Power Consumption | 40W       |\n| Temperature      | 42°C      |\n| Voltage         | 0W        |\n| Voltage         | -40°C     |\n| Voltage         | -40°C     |\n| Voltage         | -40°C     |\n| Voltage         | -40°C     |\n| Voltage         | -40°C     |\n| Voltage         | -40°C     |\n| Voltage         | -40°C     |\n| Voltage         | -40°C     |\n| Voltage         | -40°C     |\n| Voltage         | -40°C     |\n| Voltage         | -40°C    |\n| Voltage         | -40°C    |\n| Voltage         | -40°C    |\n| Voltage         | -40°C    |\n| Voltage         | -40°C    |\n| Voltage         | -40°C    |\n| Voltage         | -40°C    |\n| Voltage         | -40°C    |\n| Voltage         | -40°C    |\n| Voltage         | -40°C    |\n| Voltage         | -40°C\n| \n| Temperature      | 120°C     |\n| Temperature      | 110°C     |\n| Temperature      | 100°C     |\n| Temperature      | 90°C      |\n| Temperature      | 80°C      |\n| Temperature      | 70°C      |\n| Temperature      | 60°C      |\n| Temperature      | 50°C      |\n| Temperature      | 40°C      |\n| Temperature      | 30°C      |\n| Temperature      | 20°C      |\n| Temperature      | 10°C      |\n| Temperature      | 0°C       |\n| Temperature      | -10°C     |\n| Temperature      | -20°C     |\n| Temperature      | -30°C     |\n| Temperature      | -40°C     |\n| Temperature      | -40°C     |\n| Temperature      | -40°C     |\n| Temperature      | -40°C     |\n| Temperature      | -40°C     |\n| Temperature      | -40°C     |\n| Temperature      | -40°C     |\n| Temperature      | -40°C     |\n| Temperature      | -40°C     |\n| Temperature      | -40°C     |\n| Temperature      | -30°C     |\n| Temperature      | -20°C     |\n| Temperature      | -10°C     |\n| Temperature      | 0°C       |\n| Temperature      | 10%       |\n| Temperature      | 20%       |\n| Temperature      | 30%       |\n| Temperature      | 40%       |\n| Temperature      | 50%       |\n| Temperature      | 60%       |\n| Temperature      | 70%       |\n| Temperature      | 80%       |\n| Temperature      | 90%       |\n| Temperature      | 100%      |\n| Temperature      | 110%      |\n| Temperature      | 120%      |\n| Temperature      | 125%      |\n| Temperature      | 130%      |\n| Temperature      | 135%      |\n| Temperature      | 140%      |\n| Temperature      | 145%      |\n| Temperature      | 150%      |\n| Temperature      | 155%      |\n| Temperature      | 160%      |\n| Temperature      | 165%      |\n| Temperature      | 170%      |\n| Temperature      | 175%      |\n| Temperature      | 180%      |\n| Temperature      | 185%      |\n| Temperature      | 190%      |\n| Temperature      | 195%      |\n| Temperature      | 200%      |\n| Temperature      | 205%      |\n| Temperature      | 210%      |\n| Temperature      | 215%      |\n| Temperature      | 220%      |\n| Temperature      | 225%      |\n| Temperature      | 230%      |\n| Temperature      | 235%      |\n| Temperature      | 240%      |\n| Temperature      | 245%      |\n| Temperature      | 250%      |\n| Temperature      | 255%      |\n| Temperature      | 260%      |\n| Temperature      | 265%      |\n| Temperature      | 270%      |\n| Temperature      | 275%      |\n| Temperature      | 280%      |\n| Temperature      | 285%      |\n| Temperature      | 290%      |\n| Temperature      | 295%      |\n| Temperature      | 300%      |\nVoltage        |\nVCORE          VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   WGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFX   VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    VGFC    BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BAN8         BAN9         BAN10         BAN11         BAN12         BAN13         BAN14         BAN15         BAN/A         BAN/A         BAN/A         BAN/A         BAN/A         BAN/A         BAN/A         BAN/A         BAN/A         BAN/A         BAN/A         BAN/A         BAN/A         BAN/A         BAN/A         BAN/A         BAN/A         BAN/A         BAN/A         BAN/A         BAN/A         BAN/A         BAN/A         BAN/A         BAN/A         BAN-A         BAN-A         BAN-A         BAN-A         BAN-A         BAN-A         BAN-A         BAN-A         BAN-A         BAN-A         BAN-A         BAN-A         BAN-A         BAN-A         BAN-A         BAN-A         BAN-A         BAN-A         BAN-A         BAN-A         BAN-A         BAN-A         BAN-A         BAN-A         BAN-A         BAN-B        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX        BGTX       AIN8       AIN9       AIN10       AIN11       AIN12       AIN13       AIN14       AIN15       AIN/A       AIN/A       AIN/A       AIN/A       AIN/A       AIN/A       AIN/A       AIN/A       AIN/A       AIN/A       AIN/A       AIN/A       AIN/A       AIN/A       AIN/A       AIN/A       AIN/A       AIN/A       AIN/A       AIN/A       AIN/A       AIN/A       AIN/A       AIN/A       AIN/A       AIN/B        AIN/B        AIN/B        AIN/B        AIN/B        AIN/B        AIN/B        AIN/B        AIN/B        AIN/B        AIN/B        AIN/B        AIN/B        AIN/B        AIN/B        AIN/B        AIN/B        AIN/B        AIN/B        AIN/B        AIN/B        AIN/B        AIN/B        AIN/B        AIN/B        AIN/B       AIN/C        AIN/C        AIN/C        AIN/C        AIN/C        AIN/C        AIN/C        AIN/C        AIN/C        AIN/C        AIN/C        AIN/C        AIN/C        AIN/C        AIN/C        AIN/C        AIN/C        AIN/C        AIN/C        AIN/C        AIN/C        AIN/C        AIN/C        AIN/C        AIN/C        AIN/C       AIN/D          AIN/D          AIN/D          AIN/D          AIN/D          AIN/D          AIN/D          AIN/D          AIN/D          AIN/D          AIN/D          AIN/D          AIN/D          AIN/D          AIN/D          AIN/D          AIN/D          AIN/D          AIN/D          AIN/D          AIN/D          AIN/D          AIN/D          AIN/D          ( img src='boxvolid_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose_chart_rose-rate](.mxe-1400-50-1z192-2010-250-en/5285a60f934709423b3822e83febf8271879b27ac0652eb53a41e588ad74e8de.jpg)

When logging is enabled, all values queried every second, such as temperatures and power consumption, are recorded to a log file.

At startup, logging is disabled by default.

To enable, check Enable Logging and select a file. New data is appended to the selected file, with existing data not overwritten. Logging ceases when Enable Logging is unchecked or the program closed, and suspended during a File Open dialog.

Data is Recorded as simple ASCII text in tab-separated columns for easy import/export into any spreadsheet calculation program or other data processing tool. The first line written to the log file contains captions indicating the content and the respective unit of the data to be recorded. When any data is unavailable, such as when, for example, no sensor is detected, the corresponding column is skipped.

Currently available items are as follows

<table><tr><td>Caption</td><td>Content/Unit</td></tr><tr><td>Total[m]</td><td>Total uptime in minutes</td></tr><tr><td>PwrUp[s]</td><td>Uptime since last power up in seconds</td></tr><tr><td>Tcpu[°C]</td><td>CPU temperature in °C</td></tr><tr><td>Tbrd[°C]</td><td>Board temperature in °C</td></tr><tr><td>Tcpumin[°C]</td><td>Minimal CPU temperature in °C</td></tr><tr><td>Tcpumax[°C]</td><td>Maximal CPU temperature in °C</td></tr><tr><td>Tbrdmin[°C]</td><td>Minimal board temperature in °C</td></tr><tr><td>Tbrdmax[°C]</td><td>Maximal board temperature in °C</td></tr><tr><td>Imp[mA]</td><td>Main power current in mA</td></tr><tr><td>Pmp[W]</td><td>Power on main power current rail in W</td></tr><tr><td>n[1]</td><td>Number of samples used for filtering</td></tr><tr><td>Impf[mA]</td><td>Filtered main power current in mA</td></tr><tr><td>Pmpf[W]</td><td>Filtered power on main power current rail in W</td></tr><tr><td>FanSpdSys1-3[RPM]</td><td>CPU-Fan speed in RPM</td></tr><tr><td>FanSpdCPU[RPM]</td><td>System-Fan speed in RPM</td></tr><tr><td>‘VoltageName’[V]</td><td>For each monitored voltage in V</td></tr></table>

# C.6 I₂C Bus Tab

The board management controller (BMC) can access up to four external $I_{2}C$ busses, with byte and block access for read and write implemented. Both common bus speeds of 100 and 400kHz are supported.

To read data from or write data to the BMC an address (8-bit) must be given as well as the amount of data to be transferred (length) plus the register offset.

Data should then be handed over in hex values forming a hex string, as shown.

![SEMA - Smart Embedded Management Agent - 2.5 R4\nAbout\nOverview	System Health	User Flash	Hardware Controls	Hardware Monitor	I2C Bus	GPIO\nBus Selection\n● I2C Bus 1\n○ I2C Bus 2\n○ I2C Bus 3\n○ I2C Bus 4\nTransfer Type\n● Read/Write Block\n○ Read/Write Byte\n○ Read/Write Command - Byte\nI2C Bus Speed\n● 100KHz\n○ 400KHz\nI2C Data\nAddress (8Bit)	Length	Register / Command\n0x	00	0x	00	0x	00\nData\n0x	#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-#####-##### - Transmit\nRead\nWrite\nADLINK TECHNOLOGY INC.\nSEMA\nExit\nBIOS Ok!](.mxe-1400-50-1z192-2010-250-en/82352db18dded0ae74fbd875c67a69704003751238d191462e22c7865ada7dac.jpg)

Transfer Types

Different transfer types will result in $I_{2}C$ bus activity as follows.

<table><tr><td rowspan="2">Read/Write Block</td><td>Write</td><td>Start + Address/Write + Register /Command + Length + Data[1] + Data[2] + ... +Data[Length] + Stop</td></tr><tr><td>Read</td><td>Start + Address/Write + Register /Command + Start + Address/Read + Length + Data[1]+Data[2] + ... + Data[Length] + Stop</td></tr><tr><td rowspan="2">Read/Write Byte</td><td>Write</td><td>Start + Address/Write + Data[1] + Stop</td></tr><tr><td>Read</td><td>Start + Address/Read + Data[1] + Stop</td></tr><tr><td rowspan="2">Read/Write Command Byte</td><td>Write</td><td>Start + Address/Write + Register /Command + Data[1] + Stop</td></tr><tr><td>Read</td><td>Start + Address/Read + Register /Command + Data[1] + Stop</td></tr></table>

![The image displays a triangular warning sign with a yellow background and a black border. Inside the triangle is a large black exclamation point. Below the triangle, the word 'CAUTION:' is printed in bold black capital letters.](.mxe-1400-50-1z192-2010-250-en/a2e8be43df7219c4dc4aea07806b3172e87bdf9d7908c5c715979d76c7bb03fb.jpg)

$I_{2}C$ Bus 3 does not support Read/Write Command Byte transfer.

# C.7 GPIO Tab

Allows control of up to 16 GPIOs provided by the ADLINK board, with the actual number of usable GPIOs board-dependent.

![SEMA - Smart Embedded Management Agent - 2.5 R4\nAbout\nOverview	System Health	User Flash	Hardware Controls	Hardware Monitor	I2C Bus	GPIO\nGPIO information\nCapabilities (Hex)	Direction for now :	0x 0000\nin :	0xFFFF Input New Direction :	0x 0000\nout :	0x0000\nGO Read\nValue (Hex) :	0x 0000\nGO Write\nNew Value (Hex) :	0x 0000\nGO XorAndXor\nXor1 :	0x 0000\nAnd2 :	0x 0000\nXor3 :	0x 0000\nWrite Values\nView Values\nADLINK TECHNOLOGY INC.\nSEMA\nBIOS Ok!](.mxe-1400-50-1z192-2010-250-en/2e285d4da82ab0d63c4a0537069999b688665dd592e688c94103cf584fd8e7a6.jpg)

# C.7.1 GPIO information

Controls GPIO direction, with each bit in the shown byte representing a GPIO.

To set a GPIO for output the bit must set to 0, and for input 1. Get Direction reads the current configuration and Set Direction sets the configuration to the value entered in the Input New Direction field.

# C.7.2 IO Read

Shows the current input values for all GPIOs, with those configured as output showing current output value.

# C.7.3 IO Write

Sets outputs, with GPIOs configured as input not affected.

# C.7.4 IO XorAndXor

Reads the GPIO input and applies the logic operation in order of the input fields, with the result set as output value.

# C.8 Status Bar

Displays a flashing red LED if the board has booted using the Fail-safe BIOS, as may occur if the main BIOS has been corrupted.

<table><tr><td>Failsafe BIOS active!</td><td>Failsafe BIOS active</td></tr><tr><td>BIOS Ok!</td><td>Booted from default BIOS</td></tr></table>

This page intentionally left blank.

# Important Safety Instructions

For user safety, please read and follow all instructions, Warnings, Cautions, and Notes marked in this manual and on the associated device before handling/operating the device, to avoid injury or damage.

S'il vous plaît prêter attention stricte à tous les avertissements et mises en garde figurant sur l'appareil, pour éviter des blessures ou des dommages.

▶ Read these safety instructions carefully
- Keep the User’s Manual for future reference
▶ Read the Specifications section of this manual for detailed information on the recommended operating environment
▶ The device can be operated at an ambient temperature of $50^{\circ}$ C
- When installing/mounting or uninstalling/removing device; or when removal of a chassis cover is required for user servicing (See “Getting Started” on page 25.):

▷ Turn off power and unplug any power cords/cables
▷ Reinstall all chassis covers before restoring power

▶ To avoid electrical shock and/or damage to device:

▷ Keep device away from water or liquid sources
▷ Keep device away from high heat or humidity
▷ Keep device properly ventilated (do not block or cover ventilation openings)
▶ Always use recommended voltage and power source settings
▶ Always install and operate device near an easily accessible electrical outlet
▷ Secure the power cord (do not place any object on/over the power cord)
▶ Only install/attach and operate device on stable surfaces and/or recommended mountings

▶ If the device will not be used for long periods of time, turn off and unplug from its power source

▶ Never attempt to repair the device, which should only be serviced by qualified technical personnel using suitable tools
▶ A Lithium-type battery may be provided for uninterrupted backup or emergency power.

![The image displays a yellow triangular warning sign with a large black exclamation mark centered inside it. A black horizontal line runs across the very top edge of the frame.](.mxe-1400-50-1z192-2010-250-en/ae65c06d0ae0ba1785d74103947ac7372271fd55ab192530baa71fe0f54d9775.jpg)
CAUTION:

Risk of explosion if battery is replaced with one of an incorrect type; please dispose of used batteries appropriately.

Risque d'explosion si la pile est remplacée par une autre de type incorrect. Veuillez jeter les piles usagées de façon appropriée.

▶ The device must be serviced by authorized technicians when:

The power cord or plug is damaged
▷ Liquid has entered the device interior
The device has been exposed to high humidity and/or moisture
The device is not functioning or does not function according to the User's Manual
The device has been dropped and/or damaged and/or shows obvious signs of breakage

▶ Disconnect the power supply cord before loosening the thumbscrews and always fasten the thumbscrews with a screwdriver before starting the system up

It is recommended that the device be installed only in a server room or computer room where access is:

▶ Restricted to qualified service personnel or users familiar with restrictions applied to the location, reasons therefor, and any precautions required

▶ Only afforded by the use of a tool or lock and key, or other means of security, and controlled by the authority responsible for the location

![Yellow triangular warning sign with black smoke symbol indicating hot weather](.mxe-1400-50-1z192-2010-250-en/56c6a9503e7c6f8c3c054abc3a7696cbc1bcac34c5244002ed0395dfd71279a1.jpg)

# BURN HAZARD

Touching this surface could result in bodily injury. To reduce risk, allow the surface to cool before touching.

# RISQUE DE BRÛLURES

Ne touchez pas cette surface, cela pourrait entraîner des blessures.

Pour éviter tout danger, laissez la surface refroidir avant de la toucher.

This page intentionally left blank.

# Getting Service

Ask an Expert: http://askanexpert.adlinktech.com

# ADLINK Technology, Inc.

Address: 9F, No.166 Jian Yi Road, Zhonghe District
New Taipei City 235, Taiwan
新北市中和區建一路 166 號 9 樓

Tel: +886-2-8226-5877

Fax: +886-2-8226-5717

Email: service@adlinktech.com

# Ampro ADLINK Technology, Inc.

Address: 5215 Hellyer Avenue, #110
San Jose, CA 95138, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

Fax: +1-408-360-0222

Email: info@adlinktech.com

# ADLINK Technology (China) Co., Ltd.

Address: 上海市浦东新区张江高科技园区芳春路300号(201203)300 Fang Chun Rd., Zhangjiang Hi-Tech Park Pudong New Area, Shanghai, 201203 China

Tel: +86-21-5132-8988

Fax: +86-21-5132-3588

Email: market@adlinktech.com

# ADLINK Technology Beijing

Address: 北京市海淀区上地东路 1 号盈创动力大厦 E 座 801 室(100085)
Rm. 801, Power Creative E, No. 1 Shang Di East Rd.
Beijing, 100085 China

Tel: +86-10-5885-8666

Fax: +86-10-5885-8626

Email: market@adlinktech.com

# ADLINK Technology Shenzhen

Address: 深圳市南山区科技园南区高新南七道 数字技术园
A1 栋 2 楼 C 区 (518057)
2F, C Block, Bldg. A1, Cyber-Tech Zone, Gao Xin Ave. Sec. 7
High-Tech Industrial Park S., Shenzhen, 518054 China

Tel: +86-755-2643-4858

Fax: +86-755-2664-6353

Email: market@adlinktech.com

# LiPPERT ADLINK Technology GmbH

Address: Hans-Thoma-Strasse 11
D-68163 Mannheim, Germany

Tel: +49-621-43214-0

Fax: +49-621 43214-30

Email: emea@adlinktech.com

# PENTA ADLINK Technology GmbH

Ulrichsbergerstrasse 17

94469 Deggendorf, Germany

Tel: +49 (0) 991 290 94 - 10

Fax: +49 (0) 991 290 94 - 29

Email: emea@adlinktech.com

# ADLINK Technology, Inc. (French Liaison Office)

Address: 6 allée de Londres, Immeuble Ceylan
91940 Les Ulis, France

Tel: +33 (0) 1 60 12 35 66

Fax: +33 (0) 1 60 12 35 66

Email: france@adlinktech.com

# ADLINK Technology Japan Corporation

Address: 〒101-0045 東京都千代田区神田鍛冶町 3-7-4
神田 374 ビル 4F
KANDA374 Bldg. 4F, 3-7-4 Kanda Kajicho,
Chiyoda-ku, Tokyo 101-0045, Japan

Tel: +81-3-4455-3722

Fax: +81-3-5209-6013

Email: japan@adlinktech.com

# ADLINK Technology, Inc. (Korean Liaison Office)

Address: 경기도 성남시 분당구 수내로 46 번길 4 경동빌딩 2 층
(수내동 4-4 번지) (우) 463-825
2F, Kyungdong B/D, 4 Sunae-ro 46 beon-gil
Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-825

Toll Free +82-80-800-0585

Tel +82-31-786-0585

Fax +82-31-786-0583

Email: korea@adlinktech.com

# ADLINK Technology Singapore Pte. Ltd.

Address: 84 Genting Lane #07-02A, Cityneon Design Centre Singapore 349584

Tel: +65-6844-2261

Fax: +65-6844-2263

Email: singapore@adlinktech.com

# ADLINK Technology Singapore Pte. Ltd. (Indian Liaison Office)

Address: #50-56, First Floor, Spearhead Towers Margosa Main Road (between 16th/17th Cross) Malleswaram, Bangalore - 560 055, India

Tel: +91-80-65605817, +91-80-42246107

Fax: +91-80-23464606

Email: india@adlinktech.com

# ADLINK Technology, Inc. (Israeli Liaison Office)

Address: 27 Maskit St., Corex Building
PO Box 12777
Herzliya 4673300, Israel

Tel: +972-54-632-5251

Fax: +972-77-208-0230

Email: israel@adlinktech.com

# ADLINK Technology, Inc. (UK Liaison Office)

Tel: +44 774 010 59 65

Email: UK@adlinktech.com
[🔗 Link to the original document](.mxe-1400-50-1z192-2010-250-en/mxe-1400-50-1z192-2010-250-en.pdf)