# MXE-230 Series

# User’s Manual

Ultra-compact Rugged Edge Computers with Intel® Alder Lake & Amston Lake CPU

![Matrix\nDisplay Port\nLAN 2\nLAN 1\nCOM 2\nADLINK\n12-24 VDC USB 2.0 HDMI\nUSB 2.0 USB 3.0 U1\nCOM 1 Power\nReset\nANT 2\nANT 1](.mxe-230-series-50m-41055-1000/6468d362badbb4036a66b7a0e392740fc581fb431c8ad0de63951cdb9d73fe35.jpg)

Manual Rev.: 0.6 Preliminary

Revision Date: March 25, 2025

Part Number: 50M-41055-1000

# Preface

# Copyright

Copyright © 2025 ADLINK Technology, Inc. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

# Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

# Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.

![Symbol of a trash bin crossed out by two crossed lines, with no text or labels present.](.mxe-230-series-50m-41055-1000/33d596965ed2b469f5e0b0fe1ccbba31b7fa17547ad441f75fa2f96aff35103b.jpg)

Battery Labels (for products with battery)

![Simple line drawing of a trash bin with two crossed lines (no text or symbols)](.mxe-230-series-50m-41055-1000/22212014b1385095df8b0cc66537abd5a7193594ca1003c986d481aaecde91c5.jpg)

![The image displays a black-and-white line drawing of the universal recycling symbol enclosed within a square border. It features three arrows arranged in a triangular formation, chasing each other in a clockwise direction. Each arrow has a flat tail, a curved body, and a pointed head that points toward the tail of the next arrow.](.mxe-230-series-50m-41055-1000/329c91382e1b08a3b766ca43991a1c6e032d25b6160846c9c8ca4de643cbc5d6.jpg)
Li-ion

![RECYCLE\nRBRC\nLi-ion\n7.800.822.8837](.mxe-230-series-50m-41055-1000/add76cdd3694062716f48b58b05bff2fb9e2e1f3dfe08cca9d74d2cc7219c1ea.jpg)

![The image displays a black square with rounded corners. Inside, a white graphic is formed by four arrows meeting at a central point, creating an 'X' shape. The arrows point outwards in the four cardinal directions: up, down, left, and right. The black background forms a thick, winding 'S' or spiral shape around the white arrows.](.mxe-230-series-50m-41055-1000/dace0a93672e46c60bef2a4c047cc839c12421e95d7a7dc6fa7cd4a826635258.jpg)
廢電池請回收

# California Proposition 65 Warning

![The image features a standard warning symbol: a yellow triangle with a thick black border containing a large, centered black exclamation mark against a white background.](.mxe-230-series-50m-41055-1000/f905625d36bd7768968cb0247d89d990bc0ff6c53e8a1b7257ed332f64edfa1f.jpg)

WARNING: This product can expose you to chemicals including acrylamide, arsenic, benzene, cadmium, Tris(1,3-dichloro-2-propyl)phosphate (TDCPP), 1,4-Dioxane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and vinyl materials, which are known to the State of California to cause cancer, and acrylamide, benzene, cadmium, lead, mercury, phthalates, toluene, DEHP, DIDP, DnHP,

DBP, BBP, PVC, and vinyl materials, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

# Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

Revision History

<table><tr><td>Revision</td><td>Description</td><td>Date</td><td>By</td></tr><tr><td>0.1</td><td>Preliminary release</td><td>2024-07-14</td><td>AL</td></tr><tr><td>0.2</td><td>BIOS setup added</td><td>2024-08-28</td><td>AL</td></tr><tr><td>0.3</td><td>Specification’s I/O interface updated</td><td>2024-09-05</td><td>AL</td></tr><tr><td>0.4</td><td>Introduction and specification updated</td><td>2024-09-11</td><td>AL</td></tr><tr><td>0.5</td><td>Specifications and Appendix A added</td><td>2025-03-13</td><td>AL</td></tr><tr><td>0.6</td><td>Product image and mechanical layout updated</td><td>2025-03-25</td><td>AL</td></tr></table>

# Table of Contents

# Preface ....

# List of Figures.....

# List of Tables ..............

# 1. Introduction ...

1.1 Packing List ..
1.2 Optional Accessories ..
1.3 Features .

# 2. Specifications ...

2.1 Core System .. 3
2.2 I/O Interface .. 3
2.3 Graphics . . 3
2.4 Audio .. . 3
2.5 Power Consumption . 3
2.6 Environmental .. 4
2.7 Certification . 4
2.8 Form Factor ... 4
2.9 Operating Systems .. 4
2.10 Product SKU .. 4
2.11 Functional Block Diagram . 5

# 3. Quick Installation ...

3.1 Installing M.2 Expansion Modules . 7
3.2 Wall Mounting .. . 9
3.3 Installing DIN Rail . 9
3.4 Integrating SATA SSD .. . 10

# 4. Mechanical Layouts . . 11

# 5. Mechanical Dimensions .......... . 13

# 6. Connectors and Jumpers .... . 17

6.1 Front Panel IO Connectors .. . 17
6.2 Internal IO Connectors .. . 19

# 7. BIOS Settings ...... . 21

7.1 Main Structure . . 21
7.2 Main Menu .. . 22
7.3 Advanced Menu .. . 22
7.4 Chipset .. . 26
7.5 Security . . 27
7.6 Boot .. . 27
7.7 Save & Exit .. . 29

# 8. Appendix A – DIO Application for 4/6COM .. . 31

8.1 DIO Specifications .. 31
8.2 DIO PIN Definitions .. .. 31

8.3 DIO Setup .... .. 32

9. Appendix B – DIO Application for 4LAN ... .. 33

Safety Instructions .. . 35

Getting Services ...... .. 36

# List of Figures

Figure 1: Functional block diagram . 5

Figure 2: Onboard connector locations (Top) .. . 11

Figure 3: Mechanical dimensions (Top) .. .. 13

Figure 4: Mechanical dimensions (Front) .. .. 13

Figure 5: Mechanical dimensions (Right side) .. .. 14

Figure 6: Mechanical dimensions (Left side) .. .. 14

Figure 7: Isolated digital output circuits . .. 29

Figure 8: Digital output sample application . .. 29

Figure 9: Digital input circuits . .. 30

# List of Tables

Table 1: Onboard connector descriptions . . 11

This page intentionally left blank.

# 1. Introduction

ADLINK’s new Matrix MXE-230 Series compact embedded industrial platform, based on the Intel® Alder Lake-N N97 series processor, delivers the most reliable I/O design for maximum connectivity. Featuring a full aluminum alloy enclosure with industry-class construction, it is the embedded system of choice for industrial automation and applications demanding reliability in harsh environments.

The MXE-230 Series includes 1 HDMI, 1 DisplayPort, 4 USB ports, 2 gigabit LAN ports, 2 3-in-1 RS-232/422/485 serial ports, and a built-in TPM 2.0 module. Additional value and convenience are provided through a modular design with three independent slots for flexible system integration and expansion.

Users have the option to add a variety of different communication modules, including Wi-Fi, 4G/LTE, GPS expansion modules, and M.2 2280 M-key storage. Matrix’s proven rugged construction assures operation in harsh environments with operating shock tolerance of up to 30 G, 3 Grms vibration resistance, and optionally available extended operating temperature ranges.

# Packing List

MXE-230 computer unit
. Wall mount bracket
Screws for DIN rail, wall mount, and storage
Quick Start Guide

# Optional Accessories

 120W AC to DC power adapter 31-62163-1000-A0

Latest revisions of the datasheet, user’s manual, BIOS, drivers, and board support packages, can be downloaded from the product webpage on the ADLINK web site: www.adlinktech.com

# Features

<table><tr><td>Dimension</td><td>165 (W) x 120 (D) x 62 (H) mm</td></tr><tr><td>CPU</td><td>Intel® Alder Lake-N series processor &amp; Amston Lake series processor</td></tr><tr><td>Motherboard</td><td>ALDINK MXE-230</td></tr><tr><td>DRAM</td><td>Up to 16GB DDR5 4800MHz</td></tr><tr><td>Display</td><td>1x HDMI1x DisplayPort (up to 4K 60Hz)</td></tr><tr><td>COM</td><td>2x 3-in-1 * RS-232/422/485</td></tr><tr><td>USB</td><td>1x USB 3.0 Gen2 (1A)3x USB 2.0</td></tr><tr><td>Ethernet</td><td>2x GbE (Intel® i210IT, supporting 1Gbps/ 100Mbps / 10Mbps)</td></tr><tr><td>Expansion Slot</td><td>1x M.2 B-Key, 1x M.2 E-Key, 1x M.2 M-Key</td></tr><tr><td>Audio</td><td>High-Definition Audio. Line-in, Line-out, and Mic-in</td></tr><tr><td>Button</td><td>Power button, reset button</td></tr></table>

This page intentionally left blank.

# 2. Specifications

# 2.1 Core System

<table><tr><td>CPU</td><td>Intel® Alder Lake-N series processor &amp; Amston Lake sereise processor</td></tr><tr><td>Memory</td><td>Up to 16GB DDR5 4800MHz</td></tr></table>

# 2.2 I/O Interface

<table><tr><td>Expansion Slot</td><td>M.2 Key-M supports NVMe SSDs at PCIe Gen3 x2 speed (2280 size).M.2 Key-B supports 3042 size cards, featuring USB3.0+USB2.0 interfaces (no PCIe support).M.2 Key-E supports 2230 size cards.</td></tr><tr><td>SATA</td><td>1x SATA 6Gb/s ports w/ 5V SATA power</td></tr><tr><td>USB</td><td>1x USB 3.0 Gen2 (1A)3x USB 2.0</td></tr><tr><td>COM</td><td>2x RS-232/422/485</td></tr><tr><td>TPM</td><td>TPM 2.0</td></tr></table>

# Graphics

<table><tr><td>Interfaces</td><td>1x DP1x HDMI</td></tr></table>

# 2.4 Audio

<table><tr><td>Audio Codec</td><td>Realtek ALC888S</td></tr><tr><td>Interfaces</td><td>1x line-in, 1x line-out, MIC-in through 40pin box header</td></tr></table>

# 2.5 Power Consumption

<table><tr><td>Power off</td><td>3.9W</td><td>In shutdown mode with DC input and only USB keyboard/mouse.</td></tr><tr><td>System Idle</td><td>12.3W</td><td>Under Windows Desktop with no application programs executed.</td></tr><tr><td>Processor full load</td><td>30.1W</td><td>Under Windows with 100% CPU utilization and 2D/3D graphics load.</td></tr><tr><td>System full load</td><td>30.3W</td><td>Under Windows with 100% CPU utilization and simultaneous access to all I/O devices.</td></tr><tr><td>Recommended minimum powersupply</td><td>40W</td><td>With consideration of voltage de-rating under high environmental temperature.</td></tr></table>

# 2.6 Environmental

<table><tr><td>Power Supply</td><td colspan="2">12V-24V DC Jack connector</td></tr><tr><td rowspan="2">Temperature</td><td>Operating Temperature</td><td>-20 to 60°C (-4 to 140°F)</td></tr><tr><td>Storage (Non-Operating) Temperature</td><td>-40°C to 85°C (-4°F to 185°F – AC adapter supports up to 50°C only)</td></tr><tr><td rowspan="2">Humidity</td><td>Operating Humidity</td><td>10% - 85% (non-condensing)</td></tr><tr><td>Storage (Non-Operating) Humidity</td><td>10% - 95% (non-condensing)</td></tr></table>

# 2.7 Certification

<table><tr><td>EMC</td><td>CE and FCC Class B</td></tr><tr><td>Safety</td><td>CB, UL/cUL</td></tr></table>

# 2.8 Form Factor

<table><tr><td>System</td><td>165 (W) x 120 (D) x 62 (H) mm</td></tr></table>

# 2.9 Operating Systems

<table><tr><td>Standard Support</td><td>Windows 10 IoT Enterprise LTSC 21H2 (64-bit)Ubuntu 22.04</td></tr></table>

# 2.10 Product SKU

<table><tr><td>Model</td><td colspan="2">MXE-230</td></tr><tr><td>SKU1</td><td>MXE-231</td><td>MXE-231/4LAN</td></tr><tr><td>LAN Ports</td><td>2</td><td>4</td></tr><tr><td>DIO</td><td></td><td></td></tr><tr><td>Dimensions</td><td>165 x 120 x 62 mm</td><td>165 x 120 x 75 mm</td></tr></table>

<table><tr><td>Model</td><td colspan="2">MXE-230</td></tr><tr><td>SKU2</td><td>MXE- 231/4COM</td><td>MXE-231/6COM</td></tr><tr><td>Serial Ports</td><td>2x RS-232/422/4852x RS-232/422/485 (Isolation 2.5KV)</td><td>2x RS-232/422/4852x RS-232/422/485 (Isolation 2.5KV)2x RS-232</td></tr><tr><td>DIO</td><td colspan="2">8DI (Isolation 2.5KV)8DO (Isolation 2.5KV)</td></tr><tr><td>Dimensions</td><td colspan="2">165 x 120 x 75 mm</td></tr></table>

2.11 Functional Block Diagram
![**Central Component:**\n*   **Alder Lake Amston Lake N Platform**\n*   **SoC 6W/12W**\n\n**Left Side Connections (Memory & Peripherals):**\n*   **DDR5 SODIMM** (Socket x1, 4800, Not Support 2 RANK) connects via **Channel A**.\n*   **1G RJ45 USB 2.0 TYPE-A Combo CN** connects to **LAN IC I210IT INTEL** via **MDI** and **PCIE GEN1 PCE7**, and to the SoC via **USB2.0 USB2_5**.\n*   **1G RJ45 USB3 GEN2 TYPE-A Combo CN** connects to **LAN IC I210IT INTEL** via **MDI** and **PCIE GEN1 PCE10**, and to the SoC via **USB3.0 GEN2 + USB2 USB3_1 USB2_1**.\n*   Two **USB2.0 TypeA Combo CN** blocks connect to the SoC via **USB2.0 USB2_6** and **USB2.0 USB2_7**.\n*   **Micro SIM** connects via **SIM** to **M.2 B-key (3042)**, which connects to the SoC via **USB3.0+2.8 USB3_2 USB2_2**.\n*   **M.2 E-key (2230)** connects to the SoC via **PCIE+USB2 PCIE9 USB2_3**.\n*   **M.2 M-key (2280)** connects to the SoC via **PCIE x2 PCIE14**.\n*   **SATA Vertical** connects via **SATA SATA1**.\n*   **SMBus Wafer** connects via **SMBus**.\n*   **I2C Wafer** connects via **I2C I2C0**.\n*   **AFM 50PINS CONNECT** connects via **PCIE x1 PCIE11**, **SMB x1, USB2.0 x1**, and **SPI0**.\n*   **TPM NPCT760AABYX NUOTON** and **SPI ROM MX25L25673G MXIC** connect via **SPI** lines to the bottom right blocks.\n\n**Right Side Connections (Display, Audio, & I/O):**\n*   **TCP9** connects via **DP 4 LANES** to **DP++**.\n*   **DDI8** connects via **DP 4 LANES** to **HDMI LS PI3HDX1204B DIODES**, which connects via **HDMI2.0** to **HDMI2.0 Combo CN**.\n*   **DDI4** connects via **EDP 2 LANES** to **DP to LVDS PTN3460I NXP** (with **By-Pass for EDP**), which connects via **LVDS A+B** to **LVDS/EDP I-PEX 40Pins**.\n*   **HDA** connects to **AUDIO IC ALC885 REALTEK**, which connects via **MIC/HP/Line In** to **40 PINS Box Header**.\n*   **USB2_8** connects via **DI x8, DO x8, USB2.0** to **40 PINS Box Header**.\n*   **ESPI DBG CONN** connects via **ESPI** to **SUPER I/O NCT6126D**.\n*   **SUPER I/O NCT6126D** connects to:\n    *   **UART1** -) **RS232/422/485 SP339EER EXAR** -) **COM1** -) **DB9 CN1**.\n    *   **UART2** -) **RS232/422/485 SP339EER EXAR** -) **COM2** -) **DB9 CN2**.\n    *   **UART3** -) **RS232 ADM213E ADI** -) **COM3** -) **40 PINS Box Header**.\n    *   **UART4** -) **RS232 ADM213E ADI** -) **COM4** -) **40 PINS Box Header**.\n    *   **FAN OUT** -) **FAN CONN**.\n*   **LPC Bridge FB5227N FINTEK** connects via **LPC** and **SPI** to **DEBUB DB40**.\n*   **DEBUB DB40** also connects to the **TPM** and **SPI ROM** blocks via **SPI**.](.mxe-230-series-50m-41055-1000/1262fd97b82b8cf5cda1e6210af14b853c14f56ebcc7b2ff341719e8f62d309d.jpg)

Figure 1: Functional block diagram

This page intentionally left blank.

# 3. Quick Installation

This chapter covers the installation of M.2 expansion modules, wall mounting, and Din Rail, and also the integration of SATA SSDs for the ADLINK MXE-230.

# Installing M.2 Expansion Modules

1. Remove the top side screw\*4.

![A\nB\nC\nD\nE\nF\nG\nH\nI\nJ\nK\nL\nM\nN\nO\nP\nQ\nR\nS\nT\nU\nV\nW\nX\nY\nZ\nA\nB\nC\nD\nE\nF\nG\nH\nI\nJ\nK\nL\nM\nN\nO\nP\nQ\nR\nS\nT\nU\nV\nW\nX\nY\nZ](.mxe-230-series-50m-41055-1000/a4fb9993837d7112d7edc58893ecbff2931c1dae0111ba6ca7814b8e85c5c933.jpg)

2. Remove the screw\*2 on the rear.

![Technical line drawing of an electronic device chassis with labeled ports and connectors (no readable text or symbols)](.mxe-230-series-50m-41055-1000/9c634dbf1275ccfb858e74041047f175ba600ddd76dd3ef007dec34124445fa7.jpg)

3. Remove the screw\*2 of the heat sink for M.2 module.

![Technical diagram of an electronic device showing labeled ports, connectors, and display ports with annotations in red circles.](.mxe-230-series-50m-41055-1000/6e92fa7c0869cffa64540e59a45e407511d546c3c71cb5babbeee19f6336ccf5.jpg)

4. Remove the heat sink (Caution: Don’t break the thermal pad on the heat sink).

![JONE 194-28\nDisplay Port\nLANT 5\nLANT 1\nLANT 3\nLANT 4\nLANT 5\nLANT 6\nLANT 7\nLANT 8\nLANT 9\nLANT 10\nLANT 11\nLANT 12\nLANT 13\nLANT 14\nLANT 15\nLANT 16\nLANT 17\nLANT 18\nLANT 19\nLANT 20\nLANT 21\nLANT 22\nLANT 23\nLANT 24\nLANT 25\nLANT 26\nLANT 27\nLANT 28\nLANT 29\nLANT 30\nLANT 31\nLANT 32\nLANT 33\nLANT 34\nLANT 35\nLANT 36\nLANT 37\nLANT 38\nLANT 39\nLANT 40\nLANT 41\nLANT 42\nLANT 43\nLANT 44\nLANT 45\nLANT 46\nLANT 47\nLANT 48\nLANT 49\nLANT 50](.mxe-230-series-50m-41055-1000/739bd4236a5ddeab839cfb8ed4f86c466a0760607a3df14d60407d9076a17b88.jpg)

5. Install the M.2 module and reattach the heatsink, and seal it using the top cover

![Exploded view diagram of an electronic circuit board with internal components and connectors (no text or labels)](.mxe-230-series-50m-41055-1000/0bfdf3f21c74740f2489b42d1e02a0383a933d084eb8f6e9f98b28ec44cedeea.jpg)

# Wall Mounting

![33-04203-0050 · 4 PCS\nScrew M4,P-head,L5,Ni,Nylok\n5.20\nR4\n7.75\nR5\n75\n100\nØ4.50\n185.60\n7.75\n204](.mxe-230-series-50m-41055-1000/87830bdc7465e153e0498e85782a0487e0157ea1a100d8b7d6abf4b67e3d1004.jpg)

Note: [1] While the configuration shown may indicate otherwise, due to the presence of antenna ports, for safety reasons, the device should ONLY be wall-mounted with the front and rear panels on the sides, NEVER on the top or underside.
[2] Use the 2 M4 screws shipped with the controller to fix the 2 wall- mount brackets, also included, to the chassis, according to the spacing dimensions of the screw holes and brackets.
[3] The heat-generating components of the MXE-230, including the CPU and PCH, are located on the left side and contact the heatsink via thermal pads to dissipate heat. For optimal heat dissipation, ensure at least 2 inches (5 cm) of clearance underneath the MXE-230.

# Installing DIN Rail

![33-03801-0050 · 4 PCS\nScrew M3,I-head,L5,Ni,Nylok\n\n33-04101-1080-XX · 2 PCS\nScrew M4,F-head,L8,Ni,Nylok](.mxe-230-series-50m-41055-1000/be18150ae914bea8c7a6ed9618d308b6a2d832c9d1ba9aafb886f0cca8bebd4a.jpg)

![33-03801-0050 · 4 PCS\nScrew M3,I-head,L5,Ni,Nylok](.mxe-230-series-50m-41055-1000/4d34e3a58474a96a581c6b71822afc15ab5c7de17fbfa4468132e8bf40429fbb.jpg)

![33-04101-1080-XX · 2 PCS\nScrew M4,F-head,L8,Ni,Nylok](.mxe-230-series-50m-41055-1000/37bc71006acaa756f1af0e36560202d3b2d6ca5c426b2c188c641eb4e192c6ad.jpg)

Integrating SATA SSD
![Technical line drawing of a rectangular electronic device mounted on a base plate (no text or symbols)](.mxe-230-series-50m-41055-1000/7addac8b8f62bdf602fa1eea4815dbf9f53bb41e66676080aa9cc5e02bd1da06.jpg)

![Technical line drawing of a rectangular electronic component with mounting holes and mounting holes (no text or symbols)](.mxe-230-series-50m-41055-1000/85d91017b7242bcbb727c5d6302e16813032280cee164b1bc5d51051bbc116aa.jpg)

![Technical line drawing of a mechanical assembly with mounting holes and a central bracket (no text or symbols)](.mxe-230-series-50m-41055-1000/d211f6d28c032b8dc5151261fe20cbc92f6f4052231aab40fdc357d92b5f1c68.jpg)

# 4. Mechanical Layouts

![A\nI\nE\nD\nH\nJ\nB\nC\n2343\n000004\n75DA1B\n000004\n75DA1A](.mxe-230-series-50m-41055-1000/9b558417cbbdda09189a34d78a320624be87d93a8843a7eb3ec9a34d334217f3.jpg)

Figure 2: Onboard connector locations (Top)

Table 1: Onboard connector descriptions

<table><tr><td colspan="2">Onboard Connectors</td></tr><tr><td>Item</td><td>Description</td></tr><tr><td>A</td><td>DDR5 slot</td></tr><tr><td>B</td><td>SATA Port</td></tr><tr><td>C</td><td>SATA Power Wafer</td></tr><tr><td>D</td><td>M.2 M key connector</td></tr><tr><td>E</td><td>M.2 E key connector</td></tr><tr><td>F</td><td>M.2 B key connector</td></tr><tr><td>H</td><td>AFM expansion board power</td></tr><tr><td>I</td><td>AFM expansion board signal connector</td></tr><tr><td>J</td><td>RTC Battery Header</td></tr></table>

This page intentionally left blank.

# 5. Mechanical Dimensions

Top View
![Technical line drawing of a rectangular enclosure with mounting holes and dimension label (115.50), no readable text or symbols beyond measurement lines.](.mxe-230-series-50m-41055-1000/e368d3bfc1f1e45b78064b02900132e69b20ae370ab162dde0d41769936923cb.jpg)

Dimensions: mm

Figure 3: Mechanical dimensions (Top)
Front View
![164\nADLINK\nDisplay Port LAN 2 LAN 1 COM 2\n12-24 VDC USB 2.0 HDMI USB 2.0 USB 3.0 U1 COM 1 Power\nReset\n60](.mxe-230-series-50m-41055-1000/711a058cd0ff92bf1189bd8dcff433895e3178434978eeb58cd20d9c090d8a49.jpg)

MXE-230 standard

![DI/O\nCOM3\nCOM4\nAIDLINK\nDisplay Port\nLAN 2\nLAN 1\nCOM 2\n12-24 VDC USB 2.0\nHDMI\nUSB 2.0\nUSB 3.0\nU1o\nCOM 1\nPower\nReset\n75 ±0.50\n164 ±0.50](.mxe-230-series-50m-41055-1000/d7dc36e3c49689fa00cab5e099f3db3b1ffee318d49b0a029dc79f21a1054c21.jpg)

MXE-230 4COM/6COM

![164\n75\nACLEBRIC\nUSB\nUSB 1\nUSB 2\nUSB 3\nUSB 4\nUSB 5\nUSB 6\nUSB 7\nUSB 8\nUSB 9\nUSB 10\nUSB 11\nUSB 12\nUSB 13\nUSB 14\nUSB 15\nUSB 16\nUSB 17\nUSB 18\nUSB 19\nUSB 20\nUSB 21\nUSB 22\nUSB 23\nUSB 24\nUSB 25\nUSB 26\nUSB 27\nUSB 28\nUSB 29\nUSB 30](.mxe-230-series-50m-41055-1000/3220da5902a4287a61936f1ce19f23f1a91d9f70c7b4d6150207615654d9ef22.jpg)

MXE-230 4LAN
![164\n75\nADLINK\nDisplay Port\nLAM 2\nLAM 1\n10-24 VDC\nUSB 3.0\nHDMI\nUSB 2.0\nUSB 3.0\nU1o\nPower\nV-2 Reset](.mxe-230-series-50m-41055-1000/487431ca4d1ed0207ce76d56b4c5132158efb883b0e42ce441d3d06879619e3c.jpg)

MXE-230F
Dimensions: mm

Figure 4: Mechanical dimensions (Front)

Right Side View
![ANT 1\nANT 2](.mxe-230-series-50m-41055-1000/a36893282e2b0284ca6b2eaf4f3bf177d1e734cddb3e51861cb185afcb768972.jpg)

MXE-230 Standard & MXE-230 4LAN

![COM 5\nCOM 6\n115.50 ±0.50](.mxe-230-series-50m-41055-1000/9895fd264ced91c959d299d649a8af9b07eefa3f1c1cd1e69c23a5810a289161.jpg)

MXE-230 6COM

![115.50](.mxe-230-series-50m-41055-1000/d88e19f3e8857fb8ec23cb8bae483b6beeaaea1e695a509df3dcb7c5ae0cec9c.jpg)

MXE-230F
Dimensions: mm
Figure 5: Mechanical dimensions (Right side)

# Left Side View

![ANT 4\nANT 3](.mxe-230-series-50m-41055-1000/fb7269b20884cf3c6032d829f207e7198460b4016416849c8a57937f489768f5.jpg)

Dimensions: mm
Figure 6: Mechanical dimensions (Left side)

# 6. Connectors and Jumpers

# 6.1 Front Panel IO Connectors

# 6.1.1 Power LEDs

The power button is a non-latched push button with a blue LED indicator. System is turned on when button is pressed, and the power LED lit. If the system hangs, pressing the button for 5 seconds powers down the system.

<table><tr><td>System status</td><td>Power LED</td></tr><tr><td>Turned on</td><td>Light On</td></tr><tr><td>Suspension (S3)</td><td>Blinking</td></tr><tr><td>Hibernation (S4)</td><td>Blinking</td></tr><tr><td>Power Off (S5)</td><td>Light Off</td></tr></table>

# 6.1.2 LAN LEDs

<table><tr><td>LED</td><td>LED Color</td><td>Status</td><td>Description</td></tr><tr><td rowspan="3">Active/Link</td><td rowspan="3">Yellow</td><td>OFF</td><td>Ethernet port is disconnected</td></tr><tr><td>ON</td><td>Ethernet port is connected with noactivity</td></tr><tr><td>Flashing</td><td>Ethernet port is connected andactive</td></tr><tr><td rowspan="3">Speed</td><td rowspan="3">Green/Orange</td><td>OFF</td><td>100 Mbps</td></tr><tr><td>Green</td><td>1G bps</td></tr><tr><td>Yellow</td><td>2.5G bps</td></tr></table>

# 6.1.3 LED Status Indicators

There are three LEDs on the front panel, apart from the power LED, indicating the following operations.

<table><tr><td>LED Indication</td><td>Location</td><td>Color</td><td>Description</td></tr><tr><td>Hard disk drive (HD)</td><td>LED1</td><td>Red</td><td>Blinking indicates that the SATA HDD and/or SSD are active.</td></tr><tr><td>Diagnostic (DG)</td><td>LED2</td><td>Red</td><td>Lighting continuously indicates that no physical storage is connected.Blinking indicates that no memory is installed on either SO-DIMM socket.</td></tr><tr><td>User-defined</td><td>LED3</td><td>Red</td><td>User-defined LED</td></tr></table>

# 6.1.4 DisplayPort

A single DisplayPort connector supporting DP 1.2 facilitates connectivity to VGA, DVI, HDMI, and DisplayPort monitors using adapter cables, supporting resolutions up to 4096 x 2160 at 60Hz.

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>ML_Lane0_P</td><td>11</td><td>GND</td></tr><tr><td>2</td><td>GND</td><td>12</td><td>ML_Lane3_N</td></tr><tr><td>3</td><td>ML_Lane0_N</td><td>13</td><td>Config1</td></tr><tr><td>4</td><td>ML_Lane1_P</td><td>14</td><td>Config2</td></tr><tr><td>5</td><td>GND</td><td>15</td><td>Aux_P</td></tr><tr><td>6</td><td>ML_Lane1_N</td><td>16</td><td>GND</td></tr><tr><td>7</td><td>ML_Lane2_P</td><td>17</td><td>Aux_N</td></tr><tr><td>8</td><td>GND</td><td>18</td><td>Hot Plug</td></tr><tr><td>9</td><td>ML_Lane2_N</td><td>19</td><td>Return</td></tr><tr><td>10</td><td>ML_Lane3_P</td><td>20</td><td>DP_PWR_+3.3V</td></tr></table>

![2\n20\n1\n19](.mxe-230-series-50m-41055-1000/8c638092a6c4d0356e541019de31a9d701dda69576e920404810054a36bb253f.jpg)

# 6.1.5 USB

The USB 3.0 port supports Type A connection, compatible with SuperSpeed, Hi-Speed, full-speed and low-speed USB devices, with support for multiple boot devices, including USB flash, USB external HDD, and USB CD-ROM drivers, with boot priority and boot device configured in BIOS.

Note: When using USB CD-ROM via USB 3.0 port to re-install or repair the OS, cold boot should be utilized

# 6.1.6 DB9 COM Port Connector

Through a D-sub 9-pin connector, COM1 or COM2 supports RS- 232, while the other selectively supporting RS-232/RS-422/RS-485mode by BIOS setting.

<table><tr><td>Pin</td><td>RS232</td><td>RS422</td><td>RS485</td></tr><tr><td>1</td><td>DCD#</td><td>TXD422-</td><td>485-</td></tr><tr><td>2</td><td>RXD</td><td>TXD422+</td><td>485+</td></tr><tr><td>3</td><td>TXD</td><td>RXD422+</td><td>N/C</td></tr><tr><td>4</td><td>DTR#</td><td>RXD422-</td><td>N/C</td></tr><tr><td>5</td><td>GND</td><td>N/C</td><td>N/C</td></tr><tr><td>6</td><td>DSR#</td><td>N/C</td><td>N/C</td></tr><tr><td>7</td><td>RTS#</td><td>N/C</td><td>N/C</td></tr><tr><td>8</td><td>CTS#</td><td>N/C</td><td>N/C</td></tr><tr><td>9</td><td>RI#</td><td>N/C</td><td>N/C</td></tr></table>

![1\n5\n6\n9](.mxe-230-series-50m-41055-1000/9c694de5a4d1f2be2325987ab0291164433cf3795e7dcb4fd035add561039a81.jpg)

# 6.1.7 DC Power Supply Connector

![12.5±0.3\n3.0\n+0.1\nØ5.6-0\n+0.2\n2.6-0\n0.25t\n20.2\n8.5\n8.65\nM8.0x0.75\n3\n1\n3.6\n2\n18.1\n2.1\nBOTTOM VIEW](.mxe-230-series-50m-41055-1000/bdea7e375dda604f9c72a2e465c28cd982a2f2557c40756daf62645b4e687cef.jpg)

# 6.2 Internal IO Connectors

# 6.2.1 SATA

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>GND</td><td>13</td><td>+5V</td></tr><tr><td>2</td><td>SOC_SATA_TX1_P_C</td><td>14</td><td>+5V</td></tr><tr><td>3</td><td>SOC_SATA_TX1_N_C</td><td>15</td><td>+5V</td></tr><tr><td>4</td><td>GND</td><td>16</td><td>NC</td></tr><tr><td>5</td><td>SOC_SATA_RX1_N_C</td><td>17</td><td>GND</td></tr><tr><td>6</td><td>SOC_SATA_RX1_P_C</td><td>18</td><td>GND</td></tr><tr><td>7</td><td>GND</td><td>19</td><td>GND</td></tr><tr><td>8</td><td>NC</td><td>20</td><td>GND</td></tr><tr><td>9</td><td>+3.3V</td><td>G1</td><td>GND</td></tr><tr><td>10</td><td>+3.3V</td><td>G2</td><td>GND</td></tr><tr><td>11</td><td>+3.3V</td><td>G3</td><td>GND</td></tr><tr><td>12</td><td>NC</td><td>G4</td><td>GND</td></tr></table>

![Technical diagram of an electronic component with pins and connectors (no text or symbols)](.mxe-230-series-50m-41055-1000/6857601acc299cdde63c281bf45ca46586e505ee7eff9eceb215f2649f59ff5e.jpg)

# 6.2.2 M.2 M/E/B Keys

M.2 Key-M support NVMe SSD, only supports PCIE GEN3 x2 speed. 2280 size card.
M.2 Key-B connector support 3042 size card. Only support USB3.0+USB2.0 interface, no PCIE
M.2 Key-E connector supports 2230 size card.

# 6.2.3 AFM Connector

AFM connector is designed for additional ADLINK function board, while the function board connector is tailored for ODM project to design their own function boards to meet specific customer requirements.

The AFM connector includes PCIE, USB2.0, SMBus, and LPC interface.

![Technical line drawing of an electronic circuit board with connectors and internal components (no text or symbols)](.mxe-230-series-50m-41055-1000/dbaa536a6e2724eea60b1efb91553a445bef925cdbc19bfa7524e69b03f9c413.jpg)

# 6.2.4 RTC Battery Header

Links to the BR 2032 3V coin battery pack for the system RTC function.

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>P_+3V3_VBAT</td></tr><tr><td>2</td><td>GND</td></tr></table>

![The image displays a black-and-white schematic drawing of a square-shaped component, resembling an electrical connector or socket. The object features a thick outer border with rounded corners. Inside the border, there are two dark, vertical, oval-shaped cutouts. Dark horizontal bars are visible at the top and bottom of the inner area. Below the component on the left is the number '1'. On the right side, a thin vertical black line extends upwards from the bottom edge.](.mxe-230-series-50m-41055-1000/099e2b2f29c279e8a162dd6845cb7ca8a2d581129a3c65cd5b63bb00fd55d81d.jpg)

# 7. BIOS Settings

# Main Structure

This section presents the primary menus of the AMIBIOS® EFI BIOS setup utility. Use the following table as a quick reference for the contents of the BIOS Setup Utility. The subsections describe the submenus and options for each menu item.

To enter the BIOS Setup Utility:

Press [Delete] or [Del] during POST (Power-On-Self-Test)

<table><tr><td>Main</td><td>Advanced</td><td>Chipset</td></tr><tr><td>Sets up the system time/date and displays the system information:System DateSystem Time</td><td>CPU ConfigurationPower ManagementSerial Console RedirectionUSB ConfigurationTPM 2.0 ConfigurationOnboard Devices ConfigurationHardware MonitorBIOS Watchdog TimerNetwork Stake Configuration</td><td>Memory ConfigurationPCI Express ConfigurationSATA ConfigurationUSB ConfigurationSecurity Configuration</td></tr><tr><td>Security</td><td>Boot</td><td>Save &amp; Exit</td></tr><tr><td>Changes or clears the administrator/user password for the systemPassword DescriptionUser PasswordSecure Boot</td><td>Configures the boot settings and boot priority for available devicesBoot ConfigurationFixed Boot Order Priorities</td><td>Exits the BIOS Setup Utility while saving or discard the changes madeSave Changes and ExitDiscard Changes and ExitSave Changes and ResetDiscard Changes and ResetSave ChangesDiscard ChangesRestore DefaultsSave as User DefaultsRestore User DefaultsLaunch EFI Shell from filesystem device</td></tr></table>

# Main Menu

Upon entering the BIOS Setup Utility, the Main Menu is displayed, providing read-only information about your system and also allows you to set the System Date and Time. Refer to the tables below for details of the submenus and settings.

<table><tr><td>Feature</td><td>Description</td></tr><tr><td colspan="2">BIOS Information</td></tr><tr><td>BIOS Vendor</td><td>American Megatrends Inc.</td></tr><tr><td>BIOS Version</td><td>1.02.10</td></tr><tr><td>Build Date</td><td>07/26/2024</td></tr><tr><td>MRC Version</td><td>0C.E0.89.30</td></tr><tr><td>GOP Version</td><td>21.0.1063</td></tr><tr><td>ME FW Version</td><td>16.50.10.1351</td></tr><tr><td colspan="2">System Information</td></tr><tr><td>Project Name</td><td>MXE-230</td></tr><tr><td>CPU Brand String</td><td>Intel(R) N97</td></tr><tr><td>CPU Frequency</td><td>2.00GHz</td></tr><tr><td>Total Memory</td><td>8192 MB (DDR5)</td></tr><tr><td>Memory Frequency</td><td>4800 MHz</td></tr><tr><td>PCH SKU</td><td>N Premium SKU</td></tr><tr><td>Access Level</td><td>Administrator</td></tr></table>

# Advanced Menu

7.3.1 Advanced > CPU Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td colspan="2">ID</td><td>0xB06E0</td></tr><tr><td colspan="2">Brand String</td><td>Intel(R) N97</td></tr><tr><td colspan="2">Microcode Revision</td><td>15</td></tr><tr><td colspan="2">L1 Data Cache</td><td>32 KB x 4</td></tr><tr><td colspan="2">L1 Instruction Cache</td><td>64 KB x 4</td></tr><tr><td colspan="2">L2 Cache</td><td>2048 KB</td></tr><tr><td colspan="2">L3 Cache</td><td>6 MB</td></tr><tr><td colspan="2">VMX</td><td>Supported</td></tr><tr><td colspan="2">SMX/TXT</td><td>Not Supported</td></tr><tr><td>Active Efficient-cores</td><td>All, 3, 2, 1</td><td>The number of E-cores to enable in each processor package. Note: The number of Cores and E-cores is considered together. When both are {0,0}, Pcode will enable all cores.</td></tr><tr><td>Intel(R) SpeedStep(tm)</td><td>Disabled, Enabled</td><td>Allows support for more than two frequency ranges.</td></tr><tr><td>Turbo Mode</td><td>Disabled, Enabled</td><td>Enable/Disable processor Turbo Mode (requires EMTTM enabled too). AUTO means enabled.</td></tr><tr><td>Intel(R) Speed Shift Technology</td><td>Disabled, Enabled</td><td>Enable/Disable Intel(R) Speed Shift Technology support. Enabling will expose the CPPC v2 interface to allow for hardware-controlled P-states.</td></tr><tr><td>Intel (VMX) Virtualization Technology</td><td>Disabled, Enabled</td><td>When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology.</td></tr><tr><td>VT-d</td><td>Enabled, Disabled</td><td>VT-d capability</td></tr><tr><td>C states</td><td>Disabled, Enabled</td><td>Enable/Disable CPU Power Management. Allows CPU to go to C states when it&#x27;s not 100% utilized.</td></tr></table>

7.3.2 Advanced > Power Management

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Enable Hibernation</td><td>Disabled, Enabled</td><td>Enables or disables the system’s ability to Hibernate (OS/S4 Sleep State). This option may not be effective with some operating systems.</td></tr><tr><td>ACPI Sleep State</td><td>Suspend Disabled, S3 (Suspend to RAM)</td><td>Select the highest ACPI sleep state that the system will enter when the SUSPEND button is pressed.</td></tr><tr><td>State After G3</td><td>S0 State, S5 State</td><td>Specify to the state to which the system should return when power is reapplied after a power failure (G3 state).</td></tr></table>

7.3.3 Advanced > Hardware Monitor

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Board Temperature 1</td><td colspan="2">N/A</td></tr><tr><td>Board Temperature 2</td><td colspan="2">N/A</td></tr><tr><td>Board Fan Speed</td><td colspan="2">N/A</td></tr><tr><td>Fan1 Mode</td><td>Manual mode, SMART FAN IV, Auto Mode</td><td>Fan control mode select</td></tr><tr><td>Manual PWM</td><td>[Max-Value, Min-Value, Step-Value] = [0xFF, 0x00, 0x01]</td><td>Fan will work with this Manual PWM Value (0 to 255 for 0% to 100%)</td></tr><tr><td>Temperature 1</td><td>[Max-Value, Min-Value, Step-Value] = [0xFF, 0x00, 0x01]</td><td>The value of temperature1.</td></tr><tr><td>Percent of full FD/RPM 1</td><td>[Max-Value, Min-Value, Step-Value] = [0x64, 0x00, 0x01]</td><td>The percent of full Fan Duty/RPM when temperature is T1.</td></tr><tr><td>Temperature 2</td><td>[Max-Value, Min-Value, Step-Value] = [0xFF, 0x00, 0x01]</td><td>The value of temperature2.</td></tr><tr><td>Percent of full FD/RPM 2</td><td>[Max-Value, Min-Value, Step-Value] = [0x64, 0x00, 0x01]</td><td>The percent of full Fan Duty/RPM when temperature is T2.</td></tr><tr><td>Temperature 3</td><td>[Max-Value, Min-Value, Step-Value] = [0xFF, 0x00, 0x01]</td><td>The value of temperature3.</td></tr><tr><td>Percent of full FD/RPM 3</td><td>[Max-Value, Min-Value, Step-Value] = [0x64, 0x00, 0x01]</td><td>The percent of full Fan Duty/RPM when temperature is T3.</td></tr><tr><td>Temperature 4</td><td>[Max-Value, Min-Value, Step-Value] = [0xFF, 0x00, 0x01]</td><td>The value of temperature4.</td></tr><tr><td>Percent of full FD/RPM 4</td><td>[Max-Value, Min-Value, Step-Value] = [0x64, 0x00, 0x01]</td><td>The percent of full Fan Duty/RPM when temperature is T4.</td></tr><tr><td>Critical temperature</td><td>[Max-Value, Min-Value, Step-Value] = [0xFF, 0x00, 0x01]</td><td>Fan temperature critical value.</td></tr><tr><td>VCORE</td><td colspan="2">N/A</td></tr><tr><td>VIN0</td><td colspan="2">N/A</td></tr><tr><td>VIN1</td><td colspan="2">N/A</td></tr><tr><td>VIN2</td><td colspan="2">N/A</td></tr><tr><td>AVSB</td><td colspan="2">N/A</td></tr><tr><td>VBAT</td><td colspan="2">N/A</td></tr></table>

7.3.4 Advanced > BIOS Watchdog Timer

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>BIOS POST Watchdog</td><td>Disabled, Second Mode, Minute Mode</td><td>1. Disable: Disable Watchdog Timer; 2. Second Mode: Enable Watchdog Timer in second mode; 3. Minute Mode: Enable Watchdog Timer in minute mode.</td></tr></table>

7.3.5 Advanced > Onboard Device Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td colspan="3">&gt; Serial Port 1 Configuration</td></tr><tr><td>COM1 Mode Control</td><td>RS232, RS422, RS485</td><td>Select COM1 mode. RS232, RS422, RS485</td></tr><tr><td colspan="3">&gt; Serial Port 2 Configuration</td></tr><tr><td>COM2 Mode Control</td><td>RS232, RS422, RS485</td><td>Select COM2 mode. RS232, RS422, RS485</td></tr><tr><td colspan="3">&gt; Serial Port 3 Configuration</td></tr><tr><td colspan="3">&gt; Serial Port 4 Configuration</td></tr><tr><td>COM1 TX termination</td><td>Enable, Disable</td><td>COM1 TX termination Enable/Disable</td></tr><tr><td>COM1 RX termination</td><td>Enable, Disable</td><td>COM1 RX termination Enable/Disable</td></tr><tr><td>COM2 TX termination</td><td>Enable, Disable</td><td>COM2 TX termination Enable/Disable</td></tr><tr><td>COM2 RX termination</td><td>Enable, Disable</td><td>COM2 RX termination Enable/Disable</td></tr><tr><td>LAN #1</td><td>Enabled, Disabled</td><td>Enable/Disable</td></tr><tr><td>LAN #2</td><td>Enabled, Disabled</td><td>Enable/Disable</td></tr></table>

7.3.6 Advanced > Serial Console Redirection

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Console Redirection</td><td colspan="2">Port Is Disabled</td></tr><tr><td>Console Redirection</td><td>Disabled, Enabled</td><td>Console Redirection Enable or Disable.</td></tr></table>

7.3.6.1 Advanced > Serial Console Redirection > Serial Console Redirection Settings

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Terminal Type</td><td>VT100, VT100Plus, VT-UTF8, ANSI</td><td>Emulation: ANSI: Extended ASCII char set. VT100: ASCII char set. VT100Plus: Extends VT100 to support color, function keys, etc. VT-UTF8: Uses UTF8 encoding to map Unicode chars onto 1 or more bytes.</td></tr><tr><td>Bits per second</td><td>9600, 19200, 38400, 57600, 115200</td><td>Selects serial port transmission speed. The speed must be matched on the other side. Long or noisy lines may require lower speeds.</td></tr><tr><td>Data Bits</td><td>7, 8</td><td>Data Bits</td></tr><tr><td>Parity</td><td>None, Even, Odd, Mark, Space</td><td>A parity bit can be sent with the data bits to detect some transmission errors. Even: The parity bit is 0 if the num of 1&#x27;s in the data bits is even. Odd: The parity bit is 0 if num of 1&#x27;s in the data bits is odd. Mark: The parity bit is always 1. Space: The parity bit is always 0. Mark and Space Parity do not the error-detection feature.</td></tr><tr><td>Stop Bits</td><td>1, 2</td><td>Stop bits indicate the end of a serial data packet. (A start bit indicates the beginning). The standard setting is 1 stop bit butcommunication with slow devices may require more than 1 stop bit.</td></tr><tr><td>Flow Control</td><td>None, Hardware RTS/CTS</td><td>Flow control can prevent data loss due to the buffer overflow. When sending data, if the receiving buffers are full, a &#x27;stop&#x27; signal can be sent to stop the data flow. Once the buffers are empty, a &#x27;start&#x27; signal can be sent to re-start the flow. Hardware flow control uses two wires to send start/stop</td></tr><tr><td>VT-UTF8 Combo Key Support</td><td>Disabled, Enabled</td><td>Enable VT-UTF8 Combination Key Support for ANSI/VT100 terminals</td></tr><tr><td>Recorder Mode</td><td>Disabled, Enabled</td><td>With this mode enabled only text will be sent. This is to capture Terminal data.</td></tr><tr><td>Resolution 100x31</td><td>Disabled, Enabled</td><td>Enables or disables extended terminal resolution</td></tr><tr><td>Putty KeyPad</td><td>VT100, LINUX, XTERMR6, SCO, ESCN, VT400</td><td>Select FunctionKey and KeyPad on Putty.</td></tr></table>

7.3.7 Advanced > TPM 2.0 Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td colspan="2">Firmware Version:</td><td>600.18</td></tr><tr><td colspan="2">Vendor:</td><td>NTC</td></tr><tr><td>Security Device Support</td><td>Disable, Enable</td><td>Enables or Disables BIOS support for security device.O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available.</td></tr><tr><td>Active PCR banks</td><td colspan="2"></td></tr><tr><td>Available PCR banks</td><td colspan="2"></td></tr><tr><td>SHA256 PCR Bank</td><td>Enable, Disable</td><td>Enable or Disable SHA256 PCR Bank</td></tr><tr><td>SHA384 PCR Bank</td><td>Enable, Disable</td><td>Enable or Disable SHA384 PCR Bank</td></tr><tr><td>SHA_256 PCR Bank</td><td>Enable, Disable</td><td>Enable or Disable SHA_256 PCR Bank</td></tr><tr><td>Pending operation</td><td>None, TPM Clear</td><td>Schedule an Operation for the Security Device. NOTE:Your Computer will reboot during the restart to change the state of the Security Device.</td></tr><tr><td>Platform Hierarchy</td><td>Disabled, Enabled</td><td>Enable or Disable Platform Hierarchy</td></tr><tr><td>Storage Hierarchy</td><td>Disabled, Enabled</td><td>Enable or Disable Storage Hierarchy</td></tr><tr><td>Endorsement Hierarchy</td><td>Disabled, Enabled</td><td>Enable or Disable Endorsement Hierarchy</td></tr><tr><td>Physical Presence Spec Version</td><td>1.2, 1.3</td><td>Select to Tell O.S. to support PPI Spec Version 1.2 or 1.3. Note some HCK tests might not support 1.3.</td></tr><tr><td>TPM 2.0 Interface Type</td><td>CRB,TIS</td><td>Select the Communication Interface to TPM 20 Device</td></tr><tr><td>Device Select</td><td>Auto,TPM 1.2,TPM 2.0</td><td>TPM 1.2 will restrict support to TPM 1.2 devices, TPM 2.0 will restrict support to TPM 2.0 devices, Auto will support both with the default set to TPM 2.0 devices if not found, TPM 1.2 devices will be enumerated</td></tr></table>

7.3.8 Advanced > Network Stack Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Network Stack</td><td>Enable, Disable</td><td>Enable/Disable UEFI Network Stack</td></tr><tr><td>IPv4 PXE Support</td><td>Enable, Disable</td><td>Enable/Disable IPv4 PXE boot support. If disabled, IPv4 PXE boot support will not be available</td></tr><tr><td>IPv4 HTTP Support</td><td>Enable, Disable</td><td>Enable/Disable IPv4 HTTP boot support. If disabled, IPv4 HTTP boot support will not be available</td></tr><tr><td>IPv6 PXE Support</td><td>Enable, Disable</td><td>Enable/Disable IPv6 PXE boot support. If disabled, IPv6 PXE boot support will not be available</td></tr><tr><td>IPv6 HTTP Support</td><td>Enable, Disable</td><td>Enable/Disable IPv6 HTTP boot support. If disabled, IPv6 HTTP boot support will not be available</td></tr><tr><td>PXE boot wait time</td><td>0</td><td>Press the ESC key in a few seconds to abort the PXE boot. Use either +/- or numeric keys to adjust the value.</td></tr><tr><td>Media detect count</td><td>1</td><td>The number of times the presence of media will be checked. Use either +/- or numeric keys to set the value.</td></tr></table>

# Chipset

# 7.4.1 Chipset > Memory Configuration

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Memory RC Version</td><td>0.0.4.74</td></tr><tr><td>Memory Frequency</td><td>4800 MHz</td></tr><tr><td>tCL-tRCD-tRP-tRAS</td><td>40-39-39-77</td></tr><tr><td>MC 0 Ch 0 DIMM 0</td><td>Populated &amp; Enabled</td></tr><tr><td>Size</td><td>8192 MB (DDR5)</td></tr><tr><td>Number of Ranks</td><td>1</td></tr><tr><td>Manufacturer</td><td>Transcend</td></tr></table>

# 7.4.2 Chipset > PCI Express Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>PCI Express Root Port 3 ,4, 7, 9, 10, 11</td><td>Disabled, Enabled</td><td>Controls the PCI Express Root Port.</td></tr><tr><td>PCIe Speed*</td><td>Auto, Gen1, Gen2, Gen3</td><td>Configures PCIe Speed</td></tr><tr><td>Detect Non-Compliance Device*</td><td>Disabled, Enabled</td><td>Detects Non-Compliance PCI Express Device. If enabled, it will take more time at POST time.</td></tr></table>

# 7.4.3 Chipset > SATA Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>SATA Controller(s)</td><td>Enabled, Disabled</td><td>Enable/Disable SATA Device.</td></tr><tr><td>Serial ATA Port 1</td><td colspan="2">Empty</td></tr><tr><td>Software Preserve</td><td colspan="2">Unknown</td></tr><tr><td>Port 1</td><td>Disabled, Enabled</td><td>Enable or Disable SATA Port</td></tr></table>

# 7.4.4 Chipset > USB Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>USB Port Disable Override</td><td>Disabled, Select Per-Pin</td><td>Selectively Enable/Disable the corresponding USB port from reporting a device connections to the controller.</td></tr><tr><td>USB SS Physical Connector #0</td><td>Disabled, Enabled</td><td>Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plugged into the connector will not be detected by BIOS or OS.</td></tr><tr><td>USB HS Physical Connector #0</td><td>Disabled, Enabled</td><td>Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plugged into the connector will not be detected by BIOS or OS.</td></tr><tr><td>USB HS Physical Connector #3</td><td>Disabled, Enabled</td><td>Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plugged into the connector will not be detected by BIOS or OS.</td></tr><tr><td>USB HS Physical Connector #4</td><td>Disabled, Enabled</td><td>Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plugged into the connector will not be detected by BIOS or OS.</td></tr><tr><td>USB HS Physical Connector #5</td><td>Disabled, Enabled</td><td>Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plugged into the connector will not be detected by BIOS or OS.</td></tr><tr><td>USB HS Physical Connector #6</td><td>Disabled, Enabled</td><td>Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plugged into the connector will not be detected by BIOS or OS.</td></tr><tr><td>USB HS Physical Connector #7</td><td>Disabled, Enabled</td><td>Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plugged into the connector will not be detected by BIOS or OS.</td></tr></table>

7.4.5 Chipset > Security Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>BIOS Lock</td><td>Disabled, Enabled</td><td>Enable/Disable the PCH BIOS Lock Enable feature. Required to be enabled to ensure SMM protection of flash.</td></tr></table>

Security

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Administrator Password</td><td></td><td>Set Administrator Password</td></tr><tr><td>User Password</td><td></td><td>Set User Password</td></tr><tr><td>▶ Secure Boot Menu</td><td></td><td>Secure Boot Configuration</td></tr></table>

# Boot

7.6.1 Boot > Boot Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Setup Prompt Timeout</td><td>[ Max-Value, Min-Value, Step-Value] = [ 0x0008, 0x0001, 0x0001]</td><td>Number of seconds to wait for setup activation key. The maximum value is 8</td></tr><tr><td>Bootup NumLock State</td><td>On, Off</td><td>Select the keyboard NumLock state</td></tr><tr><td>Quiet Boot</td><td>Disabled, Enabled</td><td>Enables or disables Quiet Boot option</td></tr><tr><td>Fast Boot</td><td>Disabled, Enabled</td><td>Enables or disables booting with initialization of a minimal set of devices required to launch active the boot option. The setting has no effect on BBS boot options.</td></tr></table>

7.6.2 Boot > Fixed Boot Order Priorities

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Boot Option #1</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key:UEFI: SanDisk, Partition 1, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #2</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key:UEFI: SanDisk, Partition 1, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #3</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key:UEFI: SanDisk, Partition 1, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #4</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key:UEFI: SanDisk, Partition 1, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #5</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key:UEFI: SanDisk, Partition 1, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #6</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key:UEFI: SanDisk, Partition 1, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #7</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key:UEFI: SanDisk, Partition 1, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #8</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key:UEFI: SanDisk, Partition 1, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #9</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key:UEFI: SanDisk, Partition 1, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #10</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key:UEFI: SanDisk, Partition 1, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #1*</td><td>Hard Disk, Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #2*</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #3*</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #4*</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #5*</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #6*</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #7*</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #8*</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #9*</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #10*</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr></table>

Save & Exit

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Save Changes and Exit</td><td></td><td>Exit the system setup after saving the changes.</td></tr><tr><td>Discard Changes and Exit</td><td></td><td>Exit the system setup without saving any changes.</td></tr><tr><td>Save Changes and Reset</td><td></td><td>Reset the system after saving the changes.</td></tr><tr><td>Discard Changes and Reset</td><td></td><td>Reset the system without saving any changes.</td></tr><tr><td>Save Changes</td><td></td><td>Save the changes made to any of the setup options.</td></tr><tr><td>Discard Changes</td><td></td><td>Discard the changes made to any of the setup options.</td></tr><tr><td>Restore Defaults</td><td></td><td>Restore/Load default values for all the setup options.</td></tr><tr><td>Save as User Defaults</td><td></td><td>Save the changes made as User Defaults.</td></tr><tr><td>Restore User Defaults</td><td></td><td>Restore the User Defaults to all the setup options.</td></tr><tr><td>Launch EFI Shell from filesystem device</td><td></td><td>Attempts to launch EFI Shell application (Shell.efi) from one of the available filesystem devices.</td></tr></table>

This page intentionally left blank.

# Appendix A – DIO Application (For MXE-230 4/6COM SKU)

# A.1 DIO Specifications

<table><tr><td>8xDI, 8x DO</td></tr><tr><td>DI:Logic 0: 10~30VLogic 1: 0-1V, 2.5kVdc isolation by photocouplerDO: supply voltage 5-30V, sink current 500mA2.5kv isolation</td></tr></table>

# A.2 DIO PIN Definitions

<table><tr><td rowspan="14"></td><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>DI0_L</td><td>14</td><td>CN_DI4_H</td></tr><tr><td>2</td><td>DI1_L</td><td>15</td><td>CN_DI5_H</td></tr><tr><td>3</td><td>DI2_L</td><td>16</td><td>CN_DI6_H</td></tr><tr><td>4</td><td>DI3_L</td><td>17</td><td>CN_DI7_H</td></tr><tr><td>5</td><td>DI45_L</td><td>18</td><td>GND</td></tr><tr><td>6</td><td>GND</td><td>19</td><td>DO0</td></tr><tr><td>7</td><td>DI67_L</td><td>20</td><td>DO1</td></tr><tr><td>8</td><td>P_+VDIO_EXT</td><td>21</td><td>DO2</td></tr><tr><td>9</td><td>P_+5V0_DIO_CN</td><td>22</td><td>DO3</td></tr><tr><td>10</td><td>CN_DI0_H</td><td>23</td><td>DO4</td></tr><tr><td>11</td><td>CN_DI1_H</td><td>24</td><td>DO5</td></tr><tr><td>12</td><td>CN_DI2_H</td><td>25</td><td>DO6</td></tr><tr><td>13</td><td>CN_DI3_H</td><td>26</td><td>DO7</td></tr></table>

![GND_DIO\n1\nS1\nD1\n8\nCN_DO_6\nISO_DO6 R159\n680ohm +/-1%\n2\nGND_DIO\n3\nS2\nD2\n7\nCN_DO_7\nISO_DO7 R160\n680ohm +/-1%\n4\nG2\nD2\n5\nDMN6040SSD-13_5A/60V](.mxe-230-series-50m-41055-1000/026e379fb4487a36ce21d3194aac4aa8ea3d5f8d0451d57415c2c2a0be2f2b47.jpg)

Figure 7: Isolated digital output circuits

![DC\n(5~35V)\nLoad\n+VDD\nDOn\nEOGND\nFlywheel\nDiode\nMOSFET\n+V5DIO_ISO\nPhotocoupler\nDO BUF n\nGND](.mxe-230-series-50m-41055-1000/e50100faec0d624ffc084aeff0a46a01ecf166c1ef2238cae9698d49ea2ee2fd.jpg)

Figure 8: Digital output sample application

![DI_H\n4.7K +5%\n1\n2\nU25\nTLP292-GR\n1\n2\n3\n4\nP_+3V3_S\nR287\n10K_+-1%\nDI\nDI_L\nuohm_+-5%](.mxe-230-series-50m-41055-1000/98ae26b0bcbd96b1d4f6217897ae1ffc736375fb4a64257399f26173ff36b051.jpg)

Figure 9: Digital input circuits

# A.3 DIO Setup

1. Download the DIO tool package from the ADLINK MXE-230 product website.
2. Install the MXE\_SMBus\_Driver.msi.
3. Go to DIO\_ConsoleAPP\_Bin.
4. Run DIO\_ConsoleAPP.exe in admin mode.
5. Go to StartDio\_Bin.
6. Run StartDIO.exe in admin mode.

![(68)\n(67)\n(34)\n(33)\n(36)\n(35)\n(2)\n(1)](.mxe-230-series-50m-41055-1000/8e7aa6a162cc076757de3b72079559aaa5ed5011262fb3026c67367d349c27e8.jpg)

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>+VDD</td><td>24</td><td>DI1_L</td><td>47</td><td>EOGND</td></tr><tr><td>2</td><td>EOGND</td><td>25</td><td>DI0_H</td><td>48</td><td>DO10</td></tr><tr><td>3</td><td>DO7</td><td>26</td><td>DI0_L</td><td>49</td><td>EOGND</td></tr><tr><td>4</td><td>EOGND</td><td>27</td><td>DI11</td><td>50</td><td>DO9</td></tr><tr><td>5</td><td>DO6</td><td>28</td><td>ISO_COM</td><td>51</td><td>EOGND</td></tr><tr><td>6</td><td>EOGND</td><td>29</td><td>DI10</td><td>52</td><td>DO8</td></tr><tr><td>7</td><td>DO5</td><td>30</td><td>ISO_COM</td><td>53</td><td>DI7_H</td></tr><tr><td>8</td><td>EOGND</td><td>31</td><td>DI9</td><td>54</td><td>DI7_L</td></tr><tr><td>9</td><td>DO4</td><td>32</td><td>ISO_COM</td><td>55</td><td>DI6_H</td></tr><tr><td>10</td><td>EOGND</td><td>33</td><td>DI8</td><td>56</td><td>DI6_L</td></tr><tr><td>11</td><td>DO3</td><td>34</td><td>ISO_COM</td><td>57</td><td>DI5_H</td></tr><tr><td>12</td><td>EOGND</td><td>35</td><td>+VDD</td><td>58</td><td>DI5_L</td></tr><tr><td>13</td><td>DO2</td><td>36</td><td>+V5DIO_CN_ISO</td><td>59</td><td>DI4_H</td></tr><tr><td>14</td><td>EOGND</td><td>37</td><td>EOGND</td><td>60</td><td>DI4_L</td></tr><tr><td>15</td><td>DO1</td><td>38</td><td>DO15</td><td>61</td><td>DI15</td></tr><tr><td>16</td><td>EOGND</td><td>39</td><td>EOGND</td><td>62</td><td>ISO_COM</td></tr><tr><td>17</td><td>DO0</td><td>40</td><td>DO14</td><td>63</td><td>DI14</td></tr><tr><td>18</td><td>EOGND</td><td>41</td><td>EOGND</td><td>64</td><td>ISO_COM</td></tr><tr><td>19</td><td>DI3_H</td><td>42</td><td>DO13</td><td>65</td><td>DI13</td></tr><tr><td>20</td><td>DI3_L</td><td>43</td><td>EOGND</td><td>66</td><td>ISO_COM</td></tr><tr><td>21</td><td>DI2_H</td><td>44</td><td>DO12</td><td>67</td><td>DI12</td></tr><tr><td>22</td><td>DI2_L</td><td>45</td><td>EOGND</td><td>68</td><td>ISO_COM</td></tr><tr><td>23</td><td>DI1_H</td><td>46</td><td>DO11</td><td></td><td></td></tr></table>

Table 1 : Digital I/O Connector Pin Signals

<table><tr><td rowspan="4">DI</td><td>DIn_H</td><td>High input of isolated differential DI channel(n=0 to 7)</td></tr><tr><td>DIn_L</td><td>Low input of isolated differential DI channel(n=0 to 7)</td></tr><tr><td>DIn</td><td>Input of isolated DI channel(n=8 to 15)</td></tr><tr><td>ISO_COM</td><td>Common ground of isolated DI channel8 to 15</td></tr><tr><td rowspan="4">DO</td><td>DOn</td><td>Output of isolated DO channel(n=0 to 15)</td></tr><tr><td>EOGND</td><td>Ground return path of isolated DO channel0 to 15 and +V5DIO_CN_ISO</td></tr><tr><td>+VDD</td><td>Power input signal for flywheel diode of isolatedDO channel0 to 15</td></tr><tr><td>+V5DIO_CN_ISO</td><td>Isolated 5V DC power, maximum output 180mA</td></tr></table>

Table 2: Digital I/O Connector Pin Legend

Isolated Digital Input Circuits

![DIn_H\n2.4K ohm\nPhotocoupler\nDI_n\nDIn_L\nGND](.mxe-230-series-50m-41055-1000/b79dd94e1dfe71be9fe18265dc82250ae37421d6814e6b4114336a4ab522499f.jpg)

Figure 1 Isolated Digital Input Circuit
![DIn\n2.4kΩ\nPhotocoupler\nDI_n\nISO_COM\nGND](.mxe-230-series-50m-41055-1000/39fcb87fd6eb4dd2c3b59582de68f341a9d0178c8cfa9adc15b46a6e5f121556.jpg)

Isolated Digital Output Circuits

![+VDD\nFlywheel\nDiode\n+V5DIO_ISO\nPhotocoupler\nDO_BUF_n\nDOn\nMOSFET\nEOGND\nGND](.mxe-230-series-50m-41055-1000/597d45d9827ec15b477aac270da6871c9de1f5cb36260e9e58955dbcb6a254b7.jpg)

Figure 2 : Isolated Digital Output Circuits

![DC\n(5~35V)\n+\n-\nLoad\nDOn\nEOGND\n+VDD\nFlywheel\nDiode\nMOSFET\n+V5DIO_ISO\nPhotocoupler\nDO_BUF_n\nGND](.mxe-230-series-50m-41055-1000/f0d94924ae216e1ab0609de0088fc04e5a8bfbf999e500df027746d403ddf019.jpg)

Please download the Matrix DI/O API library files and a demo program from http://www.adlinktech.com.

To use the DI/O function library for MXE-230 in your C++ project, please:

1. Include the header file matrix\_dio.h.
2. Link with the static import library matrix\_dio64.lib.
3. Deploy the runtime dynamic link library matrix\_dio64.dll.

# Safety Instructions

For user safety, please read and follow all instructions, Warnings, Cautions, and Notes marked in this manual and on the associated device before handling/operating the device, to avoid injury or damage.

S'il vous plaît prêter attention stricte à tous les avertissements et mises en garde figurant sur l'appareil , pour éviter des blessures ou des dommages.

► Read these safety instructions carefully.
► Keep the User’s Manual for future reference.
► Read the Specifications section of this manual for detailed information on the recommended operating environment.
► When installing/mounting or uninstalling/removing device; or when removal of a chassis cover is required for user servicing (See “Getting Started”):
[> Turn off power and unplug any power cords/cables. [> Turn off power and unplug any power cords/cables.
[>Reinstall all chassis covers before restoring power. [> Reinstall all chassis covers before restoring power.

► To avoid electrical shock and/or damage to device:
[> Keep device away from water or liquid sources.
[> Keep device away from high heat or humidity.
[> Keep device properly ventilated (do not block or cover ventilation openings).
[> Always use recommended voltage and power source settings.
[> Always install and operate device near an easily accessible electrical outlet.
[> Secure the power cord (do not place any object on/over the power cord) and connect it to a socket-outlet with earthing connection.
[> Only install/attach and operate device on stable surfaces and/or recommended mountings.

► If the device will not be used for long periods of time, turn off and unplug from its power source.

► Never attempt to repair the device, which should only be serviced by qualified technical personnel using suitable tools.

► A Lithium-type battery may be provided for uninterrupted backup or emergency power.

![The image displays a yellow triangular warning sign with a thick black border. Centered within the triangle is a large black exclamation point.](.mxe-230-series-50m-41055-1000/5c246cf4f1a6715d4e5029a170b990a3a06a1467e0f2121e1c6cffb56491dfec.jpg)
CAUTION:

Risk of explosion if battery is replaced with one of an incorrect type; please dispose of used batteries appropriately.

Risque d’explosion si la pile est remplacée par une autre de type incorrect. Veuillez jeter les piles usagées de façon appropriée.

► The device must be serviced by authorized technicians when:

[> The power cord or plug is damaged.
[> Liquid has entered the device interior.
[> The device has been exposed to high humidity and/or moisture.
[> The device is not functioning or does not function according to the User’s Manual.
[> The device has been dropped and/or damaged and/or shows obvious signs of breakage.

► Disconnect the power supply cord before loosening the thumbscrews and always fasten the thumbscrews with a screwdriver before starting the system up.

[> The equipment is not intended to be installed or used in a home, school, or public area accessible to the general population.
[> The knurled thumb screws with slotted heads for each Node module should be tightened with a tool after both initial installation and subsequent use.

► It is recommended that the device be installed only in a server room or computer room where access is:

[> Restricted to qualified service personnel or users familiar with restrictions applied to the location, reasons therefore, and any precautions required.

[> Only afforded by the use of a tool or lock and key, or other means of security, and controlled by the authority responsible for the location.

► Please use an approved power source certified by IEC or UL. If you need an adapter, optional accessories, or further assistance, please contact ADLINK for more information.

![The image shows a yellow triangular warning sign with a thick black border. Inside the triangle is a black pictogram featuring three wavy vertical lines rising above a horizontal line, symbolizing heat or steam. There is no text visible in the image.](.mxe-230-series-50m-41055-1000/041b1b88a6eb8b05b024b1e1ac8edd79e47669e7a5618220e1f1a7efbc8f9778.jpg)

# BURN HAZARD

Touching this surface could result in bodily injury. To reduce risk, allow the surface to cool before touching.

# RISQUE DE BRÛLURES

Ne touchez pas cette surface, cela pourrait entraîner des blessures. Pour éviter tout danger, laissez la surface refroidir avant de la toucher.

► Lisez attentivement ces consignes de sécurité
► Conservez le manuel de l'utilisateur pour pouvoir le consulter ultérieurement
► Lisez la section Spécifications de ce manuel pour des informations détaillées sur l'environnement d'exploitation recommandé
► Lors de l'installation/montage ou de la désinstallation/retrait de l'appareil ; ou lorsque le retrait d'un boîtier est nécessaire pour l'entretien par l'utilisateur (voir Mise en route) :

► Éteignez l'alimentation et débranchez tous les cordons/câbles d'alimentation.
► Réinstallez tous les panneaux du boîtier avant de remettre l'alimentation sous tension.

► Pour éviter les chocs électriques et/ou d’endommager l’appareil :

► Tenez l'appareil à l'écart de toute source d'eau ou de liquide
► Tenez l'appareil à l'écart d'une forte chaleur ou d'une humidité élevée
► Maintenez l'appareil correctement ventilé (n'obstruer ou ne couvrez pas les ouvertures de ventilation)
► Utilisez toujours les réglages de tension et de source d'alimentation recommandés
► Installez et utilisez toujours l'appareil près d'une prise de courant facilement accessible
■ Fixez le cordon d'alimentation (ne placez aucun objet sur/au-dessus du cordon d'alimentation) et connectez-le à une prise de courant avec mise à la terre

► N'essayez jamais de réparer l'appareil, qui doit être réparé uniquement par du personnel technique qualifié et utilisant des outils appropriés.

► Lors de l'installation/montage ou de la désinstallation/retrait d'un périphérique, ou lorsque le retrait d'un couvercle de châssis est requis pour l'entretien par l'utilisateur :
► Coupez l’alimentation et débranchez tous les cordons/câbles d’alimentation.

► Réinstallez tous les capots du châssis avant de rétablir l'alimentation. Installez/fixez et utilisez l'appareil uniquement sur des surfaces stables et/ou des supports recommandés.

► Si l'appareil n'est pas utilisé pendant une longue période, éteignez-le et débranchez-le de sa source d'alimentation.
► Une batterie de type lithium peut être fournie pour une alimentation de secours ou de secours ininterrompue.

► L'appareil doit être réparé par des techniciens agréés lorsque :
► Le cordon d'alimentation ou la fiche est endommagé.
► Du liquide est entré dans l’appareil. € L'appareil a été exposé à une humidité élevée et/ou à l'humidité.
► L'appareil ne fonctionne pas ou ne fonctionne pas conformément au manuel de l'utilisateur.

► L'appareil est tombé et/ou a été endommagé et/ou présente des signes évidents de casse.
► Débranchez le cordon d'alimentation avant de desserrer les vis moletées et fixez toujours les vis moletées avec un tournevis avant de démarrer le système.

L'équipement n'est pas destiné à être installé ou utilisé dans une maison, une école ou une zone publique accessible au grand public.
► Les vis à molette avec têtes fendue pour chaque module Node doivent être serrées avec un outil après l'installation initiale et lors de l'utilisation suivante.

► Il est recommandé d'installer l'appareil uniquement dans une salle de serveurs ou une salle informatique dont l'accès est :

► Réservé au personnel de service qualifié ou aux utilisateurs familiers avec les restrictions appliquées à l'emplacement, les raisons de celles-ci et les précautions requises.
► Autorisé uniquement par l'utilisation d'un outil ou d'une serrure et d'une clé, ou d'autres moyens de sécurité, et contrôlé par l'autorité responsable du lieu.

Veuillez utiliser une source d'alimentation approuvée et certifiée par la norme IEC ou UL. Si vous avez besoin d'un adaptateur, d'accessoires en option ou d'une assistance supplémentaire, veuillez contacter ADLINK pour plus d'informations.

# Getting Services

Ask an Expert: https://www.adlinktech.com/en/Askanexpert

# ADLINK Technology, Inc.

Address: No. 66, Huaya 1st Rd., Guishan District Tauyuan City 333411, Taiwan

Tel: +886-3-216-5088

Fax: +886-3-328-5706

Email: service@adlinktech.com

# Ampro ADLINK Technology, Inc.

Address: 6450 Via Del Oro, San Jose, CA 95119, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

Fax: +1-408-600-1189

Email: info@adlinktech.com

# ADLINK Technology (China) Co., Ltd.

Address: 300 Fang Chun Rd., Zhangjiang Hi-Tech Park, Pudong New Area Shanghai, 201203 China

Tel: +86-21-5132-8988

Fax: +86-21-5132-3588

Email: market@adlinktech.com

# ADLINK Technology GmbH

Address: Hans-Thoma-Strasse 8-10, 68163, Mannheim, Germany

Tel: +49-621-43214-0

Fax: +49-621 43214-30

Email: emea@adlinktech.com

Please visit the Contact page at www.adlinktech.com for information on how to contact the ADLINK regional office nearest you.
[🔗 Link to the original document](.mxe-230-series-50m-41055-1000/mxe-230-series-50m-41055-1000.pdf)