# MXE-310 Series

# User’s Manual

Rugged, Compact Edge Solutions Powered by Intel® 13th Gen Core™

![ADLINK\nPower USB 3.0\nReset HDMI Display Port Type - C 1 - LAN - 2 12-24 VDC\nCOM 1 USB 2.0 USB 2.0 USB 2.0 COM 2\nANT 1 ANT 2](.mxe-310-series-user-manual-50m-41062-1000-10/ab2f121b227c3c8be463e2a7a11a2fff55276444ab4bcc3ae53fd43223270e12.jpg)

Manual Rev.: Rev. 1.0

Revision Date: March 13, 2025

Part Number: 50M-41062-1000

# Preface

# Copyright

Copyright © 2025 ADLINK Technology, Inc. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

# Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

# Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.

![Symbol of a trash bin crossed with two diagonal lines, no text or labels present](.mxe-310-series-user-manual-50m-41062-1000-10/ee2826dbeb1e241cdaeb96b0cb15ef1fb35f55299c7a7474fc0c16adb855e366.jpg)

Battery Labels (for products with battery)

![Symbol of a trash bin crossed out by two diagonal lines (no text or labels)](.mxe-310-series-user-manual-50m-41062-1000-10/65406d4b995180a31cfb46d1ad40f6930d3251674f1770ab9f2e692f1d11f826.jpg)

![Li-ion](.mxe-310-series-user-manual-50m-41062-1000-10/0e98b546fb8e77a3bbdf337407aafad34f115410a622600152e0bca3f0ded6c8.jpg)

![RECYCLF\nRBRC\nLi-ion\n7.800.822.8837](.mxe-310-series-user-manual-50m-41062-1000-10/4cf9e91982c56ccd02811849d8d8a0e312584eb3c8351fba4cf04134552984b1.jpg)

![廢電池請回收](.mxe-310-series-user-manual-50m-41062-1000-10/b0a3ff1f11f2092a942cc7350e967731982cefdc3e7ec7a60d25cdf47e9717e9.jpg)

# California Proposition 65 Warning

![The image displays a standard yellow triangular warning sign with a thick black border. Inside the triangle, centered, is a large black exclamation point.](.mxe-310-series-user-manual-50m-41062-1000-10/67b7630a457b9003eec8f843c9cc5552da2917adcccf97f88aef50c8624c895e.jpg)

WARNING: This product can expose you to chemicals including acrylamide, arsenic, benzene, cadmium, Tris(1,3-dichloro-2-propyl)phosphate (TDCPP), 1,4-Dioxane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and vinyl materials, which are known to the State of California to cause cancer, and acrylamide, benzene, cadmium, lead, mercury, phthalates, toluene, DEHP, DIDP, DnHP,

DBP, BBP, PVC, and vinyl materials, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

# Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

Revision History

<table><tr><td>Revision</td><td>Description</td><td>Date</td><td>By</td></tr><tr><td>1.0</td><td>Initial release</td><td>2025-03-13</td><td>AL</td></tr></table>

# Conventions

Take note of the following conventions used throughout this manual to make sure that users perform certain tasks and instructions properly.

![The image displays a white document icon with a folded top-right corner and faint horizontal grey lines, overlaid with a large red checkmark.](.mxe-310-series-user-manual-50m-41062-1000-10/4fb91d31479f436e1642ac37833e903f8545affd3cebfe9fec2925b3016631f0.jpg)
NOTE:

Additional information, aids, and tips that help users perform tasks.

![A yellow triangular warning sign with a black border featuring a large black exclamation point in the center.](.mxe-310-series-user-manual-50m-41062-1000-10/4c27da0386859ce4abbba822fbf29983ba12de093e3d6c31a71f89696037c29c.jpg)
CAUTION:

Information to prevent minor physical injury, component damage, data loss, and/or program corruption when trying to complete a task.

Informations destinées à prévenir les blessures corporelles mineures, les dommages aux composants, laperte de don- nées et/ou la corruption de programme lors de l'exécution d'une tâche.

![This image shows a warning symbol consisting of a solid dark red equilateral triangle pointing upward. Centered within the triangle is a white exclamation mark. The background is white, with thin black vertical lines running along the left and right edges.](.mxe-310-series-user-manual-50m-41062-1000-10/652e6ddf96d8fd2cb86f65655b96f270a57544d2040131b28276212d1e1c6004.jpg)
WARNING:

Information to prevent serious physical injury, component damage, data loss, and/or program corruption when trying to complete a specific task.

Informations destinées à prévenir les blessures corporelles graves, les dommages aux composants, la perte de données et/ou la corruption de programme lors de l'exécution d'une tâche spécifique.

# Table of Contents

# Preface...

# List of Figures ..............

# List of Tables...

# 1. Introduction..........

Packing List.. .6
1.2 Optional Accessories .6
1.3 Features. .6

# 2. Specifications .... 8

2.1 Core System . .8
2.2 I/O Interface . .8
2.3 Graphics.. .8
2.4 Audio.. .8
2.5 Power Consumption. .8
2.6 Environmental .. .9
2.7 Certification . 9
2.8 Form Factor.. 9
2.9 Operating Systems... .9
2.10 Functional Block Diagram . .10

# 3. Quick Installation... .12

Installing M.2 Expansion Modules.. ..12
3.2 Wall Mounting .... .13
3.3 Installing DIN Rail.. .14
Integrating SATA SSD . ..14

# 4. Mechanical Layouts ............. ..16

Connector Locations . ..16
4.2 Mechanical Dimensions . .17

# 5. Connectors and Jumpers .. .20

5.1 Panel I/O Connectors. ..20
5.2 Internal IO Connectors . .23

# 6. BIOS Settings..... .26

Main Structure.. ..26
Main Menu . .27
6.3 Advanced Menu . .27
Chipset.. ..32
6.5 Security . .33
6.6 Boot.. .33
Save & Exit.. .37
MEBx .. .37

7. Appendix A M.2 Pin Definition.... .38

Safety Instructions... .39

Getting Services.......... ..41

# List of Figures

Figure 1: Functional block diagram.. .10
Figure 2: Onboard connector locations (Top) . ..16
Figure 3: Mechanical dimensions (Top).. .17
Figure 4: Mechanical dimensions (Front) . .17
Figure 5: Mechanical dimensions (Right side).. ..18
Figure 6: Mechanical dimensions (Left side) . ..18
Figure 7: Mechanical dimensions (Rear) .. .19
Figure 8: Mechanical dimensions (Bottom).. ..19

# List of Tables

Table 1: Onboard connector locations descriptions. ..16

# 1. Introduction

ADLINK’s new Matrix MXE-310 Series compact embedded industrial platform, based on the 13th Gen Intel® Core processors, delivers the most reliable I/O design for maximum connectivity. Featuring a full aluminum alloy enclosure with industry-class construction, it is the embedded system of choice for industrial automation and applications requiring reliability in harsh environments.

The MXE-310 Series includes 1x HDMI, 1x DisplayPort, 1x USB Type-C (USB 3.2, DP, Power Delivery 5V, 3A), 4x USB ports, 2x Gigabit LAN ports, 2x 3-in-1 RS-232/422/485 serial ports, and a built-in fTPM. Additional value and convenience are provided through a modular design with three independent slots for flexible system integration and expansion.

Users have the option to add a variety of communications modules, including Wi-Fi, 4G/5G LTE, GPS expansion modules, and M.2 2280 M-key storage. The Matrix’s proven rugged construction assures operation in harsh environments, with operating shock tolerance up to 30 G, 3 Grms vibration resistance, and optionally available extended operating temperature ranges.

# Packing List

MXE-310 computer unit
Wall mount bracket
. Screws for DIN rail, wall mount, and storage
Quick Start Guide

# Optional Accessories

120W AC to DC power adapter 31-62163-1010-A0

Latest revisions of the datasheet, user’s manual, BIOS, drivers, and board support packages, can be downloaded from the product webpage on the ADLINK web site: www.adlinktech.com

Features

<table><tr><td>Dimension</td><td>180 (W) x 130 (D) x 70 (H) mm</td></tr><tr><td>CPU</td><td>13th Gen Intel® Core processors (i7/i5/i3)</td></tr><tr><td>Motherboard</td><td>SBC35-RPL</td></tr><tr><td>DRAM</td><td>Up to 64GB DDR5 4800MHz</td></tr><tr><td>Display</td><td>1x HDMI 2.1 (4096 x 2160 @ 60Hz)1x DP 1.4a1x USB Type-C support DP 1.4a</td></tr><tr><td>COM</td><td>2x RS-232/422/4852x RS-232 (Rear side)</td></tr><tr><td>USB</td><td>1x USB 3.2 Gen2 (5V/1A)3x USB 2.0 (5V/0.5A)</td></tr><tr><td>Ethernet</td><td>LAN1: Intel® I219-V via RJ45 connector, with 10/100/1000 MbpsLAN2: Intel® I225-V via RJ45 connector, with 10/100/1000/2500 Mbps</td></tr><tr><td>GPIO</td><td>8DI, 8DO</td></tr><tr><td>Expansion Slot</td><td>1x M.2 B-Key, 1x M.2 E-Key, 1x M.2 M-Key</td></tr><tr><td>Audio</td><td>High-Definition Audio. Line-in, Line-out, and Mic-in (Realtek® ALC888S)</td></tr><tr><td>Button</td><td>Power button, reset button</td></tr></table>

This page intentionally left blank.

# 2. Specifications

# 2.1 Core System

<table><tr><td>CPU</td><td>13th Gen Intel® Core processors (i3/i5/i7), 15W &amp; 28W</td></tr><tr><td>Memory</td><td>Dual-channel DDR5 SO-DIMMs 4800MHz, up to 64GB</td></tr></table>

# 2.2 I/O Interface

<table><tr><td>Expansion Slot</td><td>M.2 Key-M supports NVMe SSDs at PCIe Gen3 x4 speed (2280 size).M.2 Key-B supports 3042 size cards with USIM slots for SIM cards, featuring USB3.0+USB2.0 interfaces (no PCIe support).M.2 Key-E supports PCIe x1 &amp; USB 2.0 (2230 size).</td></tr><tr><td>SATA</td><td>1x SATA 6Gb/s ports w/ 5V SATA power</td></tr><tr><td>USB</td><td>2x USB 3.2 Gen2 (5V/1A)3x USB 2.0 (5V/0.5A)</td></tr><tr><td>COM</td><td>2x RS-232/422/4852x RS-232 (Rear side)</td></tr><tr><td>DIO</td><td>8x GPI, 8x GPO (DB9)</td></tr><tr><td>TPM</td><td>fTPM, TPM 2.0 (optional)</td></tr></table>

# 2.3 Graphics

<table><tr><td>Interfaces</td><td>1x DP1.4A1x HDMI 2.1 (4096 x 2160 @ 60Hz)1x Type-C (USB 3.2, DP, Power Delivery 5V, 3A)</td></tr></table>

# 2.4 Audio

<table><tr><td>Audio Codec</td><td>Realtek ALC888S</td></tr><tr><td>Interfaces</td><td>1x line-in, 1x line-out, MIC-in</td></tr></table>

# 2.5 Power Consumption

# 2.5.1 15W CPU

<table><tr><td>Power off</td><td>3.9W</td><td>In shutdown mode with DC input and only USB keyboard/mouse.</td></tr><tr><td>System Idle</td><td>14.5W</td><td>Under Windows Desktop with no application programs executed.</td></tr><tr><td>Processor full load</td><td>24.3W</td><td>Under Windows with 100% CPU utilization and 2D/3D graphics load.</td></tr><tr><td>System full load</td><td>31.3W</td><td>Under Windows with 100% CPU utilization and simultaneous access to all I/O devices.</td></tr><tr><td>Recommended minimum powersupply</td><td>60W</td><td>With consideration of voltage de-ratingunder high environmental temperature.</td></tr></table>

2.5.2 28W CPU

<table><tr><td>Power off</td><td>3.9W</td><td>In shutdown mode with DC input and only USB keyboard/mouse.</td></tr><tr><td>System Idle</td><td>15W</td><td>Under Windows Desktop with no application programs executed.</td></tr><tr><td>Processor full load</td><td>39.3W</td><td>Under Windows with 100% CPU utilization and 2D/3D graphics load.</td></tr><tr><td>System full load</td><td>46.6W</td><td>Under Windows with 100% CPU utilization and simultaneous access to all I/O devices.</td></tr><tr><td>Recommended minimum powersupply</td><td>60W</td><td>With consideration of voltage de-rating under high environmental temperature.</td></tr></table>

![The image displays an icon of a white document with a folded top-right corner. Faint gray horizontal lines run across the document, simulating text. A large, bold red checkmark is superimposed over the document, slanting upwards from the bottom left to the top right.](.mxe-310-series-user-manual-50m-41062-1000-10/b376985445c45bd938c19420e90ca5d39ffa15475d84904d92596b9855a5e588.jpg)
NOTE:

Information in this section is for power budget planning and design purposes only. Actual power consumption may differ based on final application.

Les informations contenues dans cette annexe sont uniquement destinées à la planification du budget énergétique et à des fins de conception. La consommation réelle d'énergie peut varier en fonction de l'application finale.

2.6 Environmental

<table><tr><td>Power Supply</td><td colspan="2">12V-24V DC Jack connector</td></tr><tr><td rowspan="2">Temperature</td><td>Operating Temperature</td><td>-20°C to 60°C (-4°F to 140°F)</td></tr><tr><td>Storage (Non-Operating) Temperature</td><td>-40°C to 85°C (-4°F to 185°F – AC adapter supports up to 50°C only)</td></tr><tr><td rowspan="2">Humidity</td><td>Operating Humidity</td><td>10% - 85% (non-condensing)</td></tr><tr><td>Storage (Non-Operating) Humidity</td><td>10% - 95% (non-condensing)</td></tr></table>

2.7 Certification

<table><tr><td>EMC</td><td>CE and FCC Class B</td></tr><tr><td>Safety</td><td>CB, UL/cUL</td></tr></table>

2.8 Form Factor

<table><tr><td>System</td><td>180 (W) x 130 (D) x 70 (H) mm</td></tr></table>

2.9 Operating Systems

<table><tr><td>Standard Support</td><td>Windows 10 IoT Enterprise LTSC 21H2 (64-bit)Ubuntu 22.04</td></tr></table>

# 2.10 Functional Block Diagram

![The diagram is a block diagram for an 'A2 SBC35-RPL' system.\n\n**Central Processing Units:**\n*   **RPL - P CPU**: Contains text 'CPU 10nm', 'Intel xx/xx/xx', 'RPL-U 15W', 'RPL-P 28W'.\n    *   Connected to **Type-C CN** via **TCP1(0:3)**.\n    *   Connected to **PD controller** via **CC/SUB**.\n    *   Connected to **HDMI Redriver** via **SML1**.\n    *   Connected to **SODIMM 1** via **DDR5 Ch A**.\n    *   Connected to **SODIMM 2** via **DDR5 Ch B**.\n    *   Connected to **M.2 M key (Gen4)** via **PCIE Gen4x**.\n    *   Connected to **FM Board PCIE4x CONN** via **PCIE Gen4x** and **PCIEx4_A Gen4(0:3)**.\n    *   Connected to **FM Board PCIE3x1 CONN** via **PCIE Gen3x1** and **PCIE (HSIO:9)**.\n    *   Connected to **SATA3.0 CONN** via **SATA (HSIO:11)**.\n    *   Connected to **M.2 E-Key CONN** via **PCIE (HSIO:4) & USB2.0** and **PCIE Gen3 x1 & USB**.\n    *   Connected to **M.2 B-key CONN** via **PCIE (HSIO:5) / USB3.0/USB2.0** and **PCIE Gen3 x1 & USB**.\n    *   Connected to three **Pin Header** blocks via **I2C**, **SMB**, and **USB2.0**.\n    *   Connected to **TPM** via **SPI0** and **CS2#**.\n    *   Connected to **switch** via **SPI0**, **CS0#**, **DB40**, **SPI**, and **control**.\n    *   Connected to **eSPI to LPC (F85227)** via **eSPI**.\n    *   Connected to **SUPER I/O NCT6126D** via **eSPI_CS0#**.\n*   **PCH**: Contains text 'PCH 14nm'.\n    *   Connected to **LAN1 CN (GbE)** via **MDI(0:3)**.\n    *   Connected to **LAN2 CN (2.5G)** via **MDI(0:3)**.\n    *   Connected to **Intel I219-V** via **1GbE**.\n    *   Connected to **Intel I225-V** via **PCIE Gen3 x1**.\n    *   Connected to **Audio Codec ALC888S** via **HDA**.\n    *   Connected to **8DI/8DO** via **GPIO DI/DO 8bits**.\n    *   Connected to **USB2*2 INTERNAL WAFFER P57** via **USB2.0 & USB2.0**.\n    *   Connected to **USB3.2 P1 CONN** via **USB3.2 & USB2.0**.\n    *   Connected to **USB3.2 P2 CONN** via **USB3.2 & USB2.0**.\n    *   Connected to **2x 9 D-SUB RS232/422/485** via **COM1/2**.\n    *   Connected to **2x 9 D-SUB RS232** via **COM3/4**.\n    *   Connected to **SP339EER** via **UART1/2**.\n    *   Connected to **ADM213E** via **UART3/4**.\n*   **SUPER I/O NCT6126D**: Connected to **FAN CN** via **FAN**.\n\n**Left Side Components:**\n*   **Type-C CN** (P49): Connected to **PD controller** via **CC/SUB** and **TCP1(0:3)**.\n*   **PD controller** (TPS59592SAERSMR P43): Connected to **HDMI Redriver** via **SML1**.\n*   **HDMI Redriver** (P13HDX1204B1 P48): Connected to **HDMI 2.0b CN** via **TCP0(0:3)** and **HDMI**.\n*   **HDMI 2.0b CN** (P48): Connected to **HDMI Redriver**.\n*   **DP 1.4 CN** (P47): Connected to **CPU** via **DDIB(0:3)**.\n*   **LVDS/EDP CN** (P46): Connected to **CPU** via **DDIA(0:3)**.\n*   **Intel I219-V** (P34): Connected to **PCH**.\n*   **Intel I225-V** (P35): Connected to **PCH**.\n*   **Audio Codec ALC888S** (P36): Connected to **PCH** via **HDA** and **HDA Audio**.\n*   **Line-in Line-out Mic**: Connected to **8DI/8DO**.\n*   **USB3.2 P1 CONN** (P51): Connected to **TUSB1002AI RGER** via **USB3.2**.\n*   **USB3.2 P2 CONN** (P51): Connected to **TUSB1002AI RGER** via **USB3.2**.\n*   **TUSB1002AI RGER** (P51): Connected to **PCH** via **USB3.2**.\n*   **eSPI to LPC (F85227)** (P29): Connected to **2x 9 D-SUB RS232/422/485** via **COM1/2** and **SP339EER** via **UART1/2**.\n*   **2x 9 D-SUB RS232/422/485** (INTERNAL WAFFER P38-P40): Connected to **PCH**.\n*   **2x 9 D-SUB RS232** (INTERNAL WAFFER P38-P40): Connected to **PCH** via **COM3/4** and **ADM213E** via **UART3/4**.\n*   **SP339EER** (P38/P39): Connected to **PCH** via **UART1/2**.\n*   **ADM213E** (P40): Connected to **PCH** via **UART3/4**.\n\n**Right Side Components:**\n*   **SODIMM 1** (4800 MHz max. 4~32GB DDR5 P30): Connected to **CPU**.\n*   **SODIMM 2** (4800 MHz max. 4~32GB DDR5 P31): Connected to **CPU**.\n*   **M.2 M key (Gen4)** (P53): Connected to **CPU**.\n*   **FM Board PCIE4x CONN** (P58): Connected to **CPU**.\n*   **FM Board PCIE3x1 CONN** (P58): Connected to **PCH** via **PCIE (HSIO:9)** and **PCIE Gen3x1**.\n*   **SATA3.0 CONN** (P54): Connected to **PCH** via **SATA Gen3** and **SATA (HSIO:11)**.\n*   **M.2 E-Key CONN** (P55): Connected to **PCH** via **PCIE Gen3 x1 & USB** and **PCIE (HSIO:4) & USB2.0**.\n*   **M.2 B-key CONN** (P55): Connected to **Nano SIM** and **PCH** via **PCIE Gen3 x1 & USB** and **PCIE (HSIO:5) / USB3.0/USB2.0**.\n*   **TPM** (SLB 9672VU2.0 P43): Connected to **CPU**.\n*   **switch** (74CBTLV3257 inA inB control P42): Connected to **BIOS 0** via **SPI** and **DB40 CONN** via **DB40**.\n*   **BIOS 0** (MX25L25673GM P42): Connected to **switch**.\n*   **DB40 CONN** (P52): Connected to **switch**.\n*   **Connector**: Connected to **IC**.\n*   **IC**: Connected to **FM Connector** via **PCIE Gen4x4-8**, **PCIE Gen3x1**, **USB3.0/USB2.0**, **LPC**, **12V3.3V**.\n*   **FM Connector**: Connected to **IC**.\n\n**Additional Text/Labels:**\n*   **PCB Size : 166 (L) x 122 (W) mm**\n*   **Platform Capacity 8~64GB DDR5**\n*   **Only for 45W SKU PCIE8 Gen5 (0:7)**\n*   **PCB Stack-up HD1 1-N-1, 16L(2mm)** table listing layers TOP through BOTTOM with signals GROUND, SIGNAL, and POWER.](.mxe-310-series-user-manual-50m-41062-1000-10/7b33aab3d4bce901ada3aa8053f8814f0bfc1271e49379fd770548208dd0f24c.jpg)

Figure 1: Functional block diagram

This page intentionally left blank.

# 3. Quick Installation

This chapter covers the installation of M.2 expansion modules, wall mounting, and Din Rail, and also the integration of SATA SSDs for the ADLINK MXE-310.

# Installing M.2 Expansion Modules

1. Remove the top-side 4x screws.

![Technical diagram of an electronic device with labeled ports and connectors, showing internal components like CPU, memory, and display modules.](.mxe-310-series-user-manual-50m-41062-1000-10/224d11566471bf03668cb744633bcb09eb63c61385b86e4e9704bf96f5c4d159.jpg)

2. Install the M.2 module.

![Technical diagram of an electronic device rear panel with labeled ports and connectors](.mxe-310-series-user-manual-50m-41062-1000-10/af42d2de0a0ec09787023f41c78cef6b96158b02354a74deb9e1e939230f32ce.jpg)

3. Reattach the heatsink and seal it with the top cover using the 4x screws.

![Technical diagram of an electronic device with labeled ports and connectors, showing internal components and wiring connections.](.mxe-310-series-user-manual-50m-41062-1000-10/e9a25748fe8bca07e9bb628988d6985bea218d94b213aa5e6722ae376c16c34a.jpg)

# Wall Mounting

Use the two M4 screws shipped with the controller to attach the two wall-mount brackets (also included) to the chassis, following the spacing dimensions of the screw holes and brackets.

![420-100K\nUSB 10\n+ 50.0 60+\nCOM/1\nUSB 26\nUSB 16\nUSB 24\nCOM/2\nUSB 32\nUSB 18\nUSB 14\n3 -1AM -1\n7494C\n3 -1AM -1\nCOM/49 PCM\n+ 10 + 50 + 60\n+ 13A VAC\nT\nL](.mxe-310-series-user-manual-50m-41062-1000-10/416eefcb76eb09083687ffc36766c1fb40db64406607da336746f197e6717c68.jpg)

![The image displays a white document icon featuring a folded top-right corner and faint horizontal lines indicating text. A large, bold red checkmark is overlaid on the left side of the paper.](.mxe-310-series-user-manual-50m-41062-1000-10/68fa90115d83bec9af4fac5e055ee708dcb482e57bc98d8d7d05b58edb4f48b7.jpg)
NOTE:

The heat-generating components of the MXE-310, including the CPU and PCH, are located on the left side and make contact with the heatsink via thermal pads to dissipate heat. For optimal heat dissipation, ensure at least 2 inches (5 cm) of clearance beneath the MXE-310.

# Installing DIN Rail

The DIN rail is optional. Use the two M4 screws shipped with the controller to secure the DIN rail.

![COM1\nCOM2\nCOM3\nCOM4\nCOM5\nCOM6\nCOM7\nCOM8\nCOM9\nCOM10\nCOM11\nCOM12\nCOM13\nCOM14\nCOM15\nCOM16\nCOM17\nCOM18\nCOM19\nCOM20\nCOM21\nCOM22\nCOM23\nCOM24\nCOM25\nCOM26\nCOM27\nCOM28\nCOM29\nCOM30\nCOM31\nCOM32\nCOM33\nCOM34\nCOM35\nCOM36\nCOM37\nCOM38\nCOM39\nCOM40\nCOM41\nCOM42\nCOM43\nCOM44\nCOM45\nCOM46\nCOM47\nCOM48\nCOM49\nCOM50\nCOM51\nCOM52\nCOM53\nCOM54\nCOM55\nCOM56\nCOM57\nCOM58\nCOM59\nCOM60\nCOM61\nCOM62\nCOM63\nCOM64\nCOM65\nCOM66\nCOM67\nCOM68\nCOM69\nCOM70\nCOM71\nCOM72\nCOM73\nCOM74\nCOM75\nCOM76\nCOM77\nCOM78\nCOM79\nCOM80\nCOM81\nCOM82\nCOM83\nCOM84\nCOM85\nCOM86\nCOM87\nCOM88\nCOM89\nCOM90\nCOM91\nCOM92\nCOM93\nCOM94\nCOM95\nCOM96\nCOM97\nCOM98\nCOM99\nCOM100](.mxe-310-series-user-manual-50m-41062-1000-10/794b9ac04d9a180fa380b07fb9c2ca42567d539a4e6dde9e7d949bf7de99cc2f.jpg)

![This image displays a white document icon with a folded top-right corner. Faint gray horizontal lines are visible across the page, suggesting text. A large, bold red checkmark is superimposed over the center of the document.](.mxe-310-series-user-manual-50m-41062-1000-10/151439ab08d8d3cb2e358e2c98b23ff0e13ca1bae721a0d87bfeb626fb4d2c24.jpg)
NOTE:

When using a DIN rail, the system’s vibration resistance is 1G.

# Integrating SATA SSD

1. Remove the top cover, then install the SATA SSD and secure it with screws.
2. Connect the SATA cable.

![Technical line drawing of a mechanical assembly with labeled components (no text or symbols present)](.mxe-310-series-user-manual-50m-41062-1000-10/5cb73bd194f936124616ce0c9788c353d086b59c3e5f0eab75438a0efec0810b.jpg)

This page intentionally left blank.

# 4. Mechanical Layouts

# Connector Locations

![H\nG\nE\nF\nI\n51-47308-0420\nD\nC\nB\nA](.mxe-310-series-user-manual-50m-41062-1000-10/83ae37feb6845c614a74a849974f0c18ce80554bbf0db149d2398aa26783e1b8.jpg)

Figure 2: Onboard connector locations (Top)

Table 1: Onboard connector locations descriptions

<table><tr><td colspan="2">Onboard Connectors</td></tr><tr><td>Item</td><td>Description</td></tr><tr><td>A</td><td>M.2 M key</td></tr><tr><td>B</td><td>eDP/LVDS Connector</td></tr><tr><td>C</td><td>FPC Connector( Support FM Board)</td></tr><tr><td>D</td><td>M.2 E.Key</td></tr><tr><td>E</td><td>M.2 B.Key</td></tr><tr><td>F</td><td>Nano SIM1 Connector</td></tr><tr><td>G</td><td>SATA PWR Connector</td></tr><tr><td>H</td><td>SATA Connector</td></tr><tr><td>I</td><td>External Power Connector for FM board</td></tr></table>

# Mechanical Dimensions

# Top View

![180\n121\nMATRIX\nDimensions: mm](.mxe-310-series-user-manual-50m-41062-1000-10/1b47f4859f0e5e5763987eccd6b870aceb90dafa99c9e6ad9c825176cdb50393.jpg)

Figure 3: Mechanical dimensions (Top)

# Front View

![Power\nUSB 3.0\nReset\nHDMI\nDisplay Port\nType - C\n2 - LAN - 1\n12-24 VDC\nCOM 1\nUSB 2.0\nUSB 2.0\nUSB 2.0\nCOM 2\nADLINK\nDimensions: mm](.mxe-310-series-user-manual-50m-41062-1000-10/3263f333a21d69e878c11bcff039e5f8434a61896d9a6a956221fd7789417b83.jpg)

Figure 4: Mechanical dimensions (Front)

Right Side View
![ANT 1\nANT 2](.mxe-310-series-user-manual-50m-41062-1000-10/a1b975f78f9f5111cbe201e6778a5a680373b13b64591294bd243ff82be80ff3.jpg)

Dimensions: mm
Figure 5: Mechanical dimensions (Right side)

Left Side View
![ANT 4\nANT 3](.mxe-310-series-user-manual-50m-41062-1000-10/1e81b088b233d8b86e698be92b9cf7fb1af8e7d3e792aba9de36f3f6c23abf68.jpg)

Dimensions: mm
Figure 6: Mechanical dimensions (Left side)

Rear View
![ANT 5\nANT 6\nCOM 3\nDI/O\nCOM 4](.mxe-310-series-user-manual-50m-41062-1000-10/f035b0d9d787b9c2d0485ccaac98a361817196d683cafc226c100a38cb469483.jpg)

Dimensions: mm

Figure 7: Mechanical dimensions (Rear)
Bottom View
![Front view of a rectangular electronic device with multiple circular components and mounting points (no text or symbols)](.mxe-310-series-user-manual-50m-41062-1000-10/8d4b66a2c83b18f66f863374dc0837c4651644ae5f82a5da127861fd3db3d8b6.jpg)

Dimensions: mm

Figure 8: Mechanical dimensions (Bottom)

# 5. Connectors and Jumpers

# 5.1 Panel I/O Connectors

# 5.1.1 Power LEDs

The power button is a non-latched push button with a blue LED indicator. System is turned on when button is pressed, and the power LED lit. If the system hangs, pressing the button for 5 seconds powers down the system.

<table><tr><td>System status</td><td>Power LED</td></tr><tr><td>Turned on</td><td>Light On</td></tr><tr><td>Suspension (S3)</td><td>Blinking</td></tr><tr><td>Hibernation (S4)</td><td>Blinking</td></tr><tr><td>Power Off (S5)</td><td>Light Off</td></tr></table>

# 5.1.2 LAN LEDs

LAN1

<table><tr><td>LED</td><td>LED Color</td><td>Status</td><td>Description</td></tr><tr><td rowspan="3">Active/Link</td><td rowspan="3">Yellow</td><td>OFF</td><td>Ethernet port is disconnected</td></tr><tr><td>ON</td><td>Ethernet port is connected with no activity</td></tr><tr><td>Flashing</td><td>Ethernet port is connected and active</td></tr><tr><td rowspan="3">Speed</td><td rowspan="3">Green/Orange</td><td>OFF</td><td>10 Mbps</td></tr><tr><td>Green</td><td>100 Mbps</td></tr><tr><td>Yellow</td><td>1000 Mbps</td></tr></table>

LAN2

<table><tr><td>LED</td><td>LED Color</td><td>Status</td><td>Description</td></tr><tr><td rowspan="3">Active/Link</td><td rowspan="3">Yellow</td><td>OFF</td><td>Ethernet port is disconnected</td></tr><tr><td>ON</td><td>Ethernet port is connected with no activity</td></tr><tr><td>Flashing</td><td>Ethernet port is connected andactive</td></tr><tr><td rowspan="3">Speed</td><td rowspan="3">Green/Orange</td><td>OFF</td><td>10/100 Mbps</td></tr><tr><td>Green</td><td>1000 Mbps</td></tr><tr><td>Yellow</td><td>2500 Mbps</td></tr></table>

# 5.1.3 LED Status Indicators

There are three LEDs on the front panel, apart from the power LED, indicating the following operations.

<table><tr><td>LED Indication</td><td>Location</td><td>Color</td><td>Description</td></tr><tr><td>Hard disk drive (HD)</td><td>LED1</td><td>Red</td><td>Blinking indicates that the SATA HDD and/or SSD are active.</td></tr><tr><td>Diagnostic (DG)</td><td>LED2</td><td>Red</td><td>Lighting continuously indicates that no physical storage is connected.Blinking indicates that no memory is installed on either SO-DIMM socket.</td></tr><tr><td>User-defined</td><td>LED3</td><td>Red</td><td>User-defined LED</td></tr></table>

# 5.1.4 DisplayPort

A single DisplayPort connector supporting DP 1.4 facilitates connectivity to VGA, DVI, HDMI, and DisplayPort monitors using adapter cables, supporting resolutions up to 4096 x 2160 at 60Hz.

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>ML_Lane0_P</td><td>11</td><td>GND</td></tr><tr><td>2</td><td>GND</td><td>12</td><td>ML_Lane3_N</td></tr><tr><td>3</td><td>ML_Lane0_N</td><td>13</td><td>Config1</td></tr><tr><td>4</td><td>ML_Lane1_P</td><td>14</td><td>Config2</td></tr><tr><td>5</td><td>GND</td><td>15</td><td>Aux_P</td></tr><tr><td>6</td><td>ML_Lane1_N</td><td>16</td><td>GND</td></tr><tr><td>7</td><td>ML_Lane2_P</td><td>17</td><td>Aux_N</td></tr><tr><td>8</td><td>GND</td><td>18</td><td>Hot Plug</td></tr><tr><td>9</td><td>ML_Lane2_N</td><td>19</td><td>Return</td></tr><tr><td>10</td><td>ML_Lane3_P</td><td>20</td><td>DP_PWR_+3.3V</td></tr></table>

![2\n20\n1\n19](.mxe-310-series-user-manual-50m-41062-1000-10/af0571b0477fe55d78a83354cf4b73e685b4664a4e1347f6bb140c37005be7eb.jpg)

# 5.1.5 USB

The USB 3.2 & USB2.0 port supports Type A connection, compatible with SuperSpeed, Hi-Speed, full-speed and low-speed USB devices, with support for multiple boot devices, including USB flash, USB external HDD, and USB CD-ROM drivers, with boot priority and boot device configured in BIOS.

Note: When using USB CD-ROM via USB 3.0 port to re-install or repair the OS, cold boot should be utilized

# 5.1.6 DB9 COM Port Connector

Through a D-sub 9-pin connector, COM3 and COM4 only supports RS- 232, while the other selectively supporting RS-232/RS-422/RS-485 mode by BIOS setting.

<table><tr><td>Pin</td><td>RS232</td><td>RS422</td><td>RS485</td></tr><tr><td>1</td><td>DCD#</td><td>TXD422-</td><td>485-</td></tr><tr><td>2</td><td>RXD</td><td>TXD422+</td><td>485+</td></tr><tr><td>3</td><td>TXD</td><td>RXD422+</td><td>N/C</td></tr><tr><td>4</td><td>DTR#</td><td>RXD422-</td><td>N/C</td></tr><tr><td>5</td><td>GND</td><td>N/C</td><td>N/C</td></tr><tr><td>6</td><td>DSR#</td><td>N/C</td><td>N/C</td></tr><tr><td>7</td><td>RTS#</td><td>N/C</td><td>N/C</td></tr><tr><td>8</td><td>CTS#</td><td>N/C</td><td>N/C</td></tr><tr><td>9</td><td>RI#</td><td>N/C</td><td>N/C</td></tr></table>

![1\n5\n6\n9](.mxe-310-series-user-manual-50m-41062-1000-10/1a1c329053a28e7c2250f39ecd1d61f1225fa822de5f31c8f6ff82101a1222fa.jpg)

# 5.1.7 DC Power Supply Connector

![12.5±0.3\n3.0\n+0.1\nØ5.6-0\n+0.2\n2.6-0\n0.25t\n20.2\n8.5\n△8.65\nM8.0x0.75\n3\n1\n3.6\n3.6\n2\n2\n18.1\n2.1\nBOTTOM VIEW](.mxe-310-series-user-manual-50m-41062-1000-10/0f2ea87c11bc580c455d17f26eee62647e5756cedc58b79e225654770ba02707.jpg)

<table><tr><td colspan="3">DC POWER JACK RT Φ2.6 24V/12A</td></tr><tr><td rowspan="4"></td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>Power</td></tr><tr><td>2</td><td>GND1</td></tr><tr><td>3</td><td>GND2</td></tr></table>

![12.5±0.3\n3.0\n+0.1\nØ5.6-0\n+0.2\n2.6-0\n0.25t\n20.2\n8.5\n△8.65\nM8.0x0.75\n3\n1\n3.6\n3.6\n2\n2\n18.1\n2.1\nBOTTOM VIEW](.mxe-310-series-user-manual-50m-41062-1000-10/f36411f6d28ac9d140d2bac2f4a2d51b3b9c620206ec7bd280ab31d526e3e823.jpg)

# 5.1.8 DB26 DIO Connector

<table><tr><td>Pin</td><td>Function</td><td>Pin</td><td>Function</td></tr><tr><td>1</td><td>DI0</td><td>19</td><td>DO0</td></tr><tr><td>2</td><td>DI1</td><td>20</td><td>DO1</td></tr><tr><td>3</td><td>DI2</td><td>21</td><td>DO2</td></tr><tr><td>4</td><td>DI3</td><td>22</td><td>DO3</td></tr><tr><td>5</td><td>DI4</td><td>23</td><td>DO4</td></tr><tr><td>6</td><td>DI5</td><td>24</td><td>DO5</td></tr><tr><td>7</td><td>DI6</td><td>25</td><td>DO6</td></tr><tr><td>8</td><td>DI7</td><td>26</td><td>DO7</td></tr></table>

# 5.2 Internal IO Connectors

# 5.2.1 SATA

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>GND</td><td>13</td><td>+5V</td></tr><tr><td>2</td><td>SOC_SATA_TX1_P_C</td><td>14</td><td>+5V</td></tr><tr><td>3</td><td>SOC_SATA_TX1_N_C</td><td>15</td><td>+5V</td></tr><tr><td>4</td><td>GND</td><td>16</td><td>NC</td></tr><tr><td>5</td><td>SOC_SATA_RX1_N_C</td><td>17</td><td>GND</td></tr><tr><td>6</td><td>SOC_SATA_RX1_P_C</td><td>18</td><td>GND</td></tr><tr><td>7</td><td>GND</td><td>19</td><td>GND</td></tr><tr><td>8</td><td>NC</td><td>20</td><td>GND</td></tr><tr><td>9</td><td>+3.3V</td><td>G1</td><td>GND</td></tr><tr><td>10</td><td>+3.3V</td><td>G2</td><td>GND</td></tr><tr><td>11</td><td>+3.3V</td><td>G3</td><td>GND</td></tr><tr><td>12</td><td>NC</td><td>G4</td><td>GND</td></tr></table>

![Technical diagram of an electronic component with pins and connectors (no text or symbols)](.mxe-310-series-user-manual-50m-41062-1000-10/fd352d7730b5ff58db7156cef599263a6aa17b228888a373c3455e8f4a9de7d3.jpg)

# 5.2.2 M.2 M/E/B Keys

M.2 Key-M support NVMe SSD, only supports PCIE GEN3 x2 speed. 2280 size card.
M.2 Key-B connector support 3042 size card, and support USIM slots for SIM cards. Only support USB3.0+USB2.0 interface, no PCIe M.2 Key-E connector supports 2230 size card.

# 5.2.3 Micro SIM Slot

Using a SIM connector with a WWAN card that utilizes the M.2 B Key interface.

![(13.17)\n13,80\n(13.33)\n(0,65) (2X)\n(1,45) (2X)\n(1,00) (2X)\n(14,85) (2X)\n(15,35) (2X)\nA](.mxe-310-series-user-manual-50m-41062-1000-10/b5b9aa810328e3c710f0031ccb9aba519180b702ba6e700207fb9c22d1558c4d.jpg)

# 5.2.4 AFM Connector

AFM connector is designed for additional ADLINK function board, while the function board connector is tailored for ODM project to design their own function boards to meet specific customer requirements.

The AFM connector includes PCIe Gen 4x4, USB3.0, SMBus, and LPC interface.

![≤50mm\nBOL4-450mm](.mxe-310-series-user-manual-50m-41062-1000-10/248efa57125cdc07d97a5eb36246d2deb31e53e0e824573cb4dc17744befe837.jpg)

# 5.2.5 RTC Battery Header

Links to the BR 2032 3V coin battery pack for the system RTC function.

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>P_+3V3_VBAT</td></tr><tr><td>2</td><td>GND</td></tr></table>

![The image displays a black outline of a USB Type-B socket. Inside the upper portion are two small vertical rectangular indentations. Below the bottom-left corner is the number '1'. A vertical black line extends downward from the bottom center, ending in a small red horizontal dash.](.mxe-310-series-user-manual-50m-41062-1000-10/1c3501daf982c57f6c9e3a8b38705c339509ff419cb6e14dad9ab42b36fc850c.jpg)

# 6. BIOS Settings

# Main Structure

This section presents the primary menus of the AMIBIOS® EFI BIOS setup utility. Use the following table as a quick reference for the contents of the BIOS Setup Utility. The subsections describe the submenus and options for each menu item.

To enter the BIOS Setup Utility:

1. Power on the motherboard
2. Press &lt; Delete &gt; when the prompt appears.

This section presents the seven primary menus of the BIOS Setup Utility. Use the following table as a quick reference for the contents of the BIOS Setup Utility. The subsections in this section describe the submenus and setting options for each menu item. The default setting options are presented in bold, and the function of each setting is described in the right-hand column of the respective table.

<table><tr><td>Main</td><td>Advanced</td><td>Chipset</td><td>Security</td></tr><tr><td>-System Date-System Time</td><td>► CPU Configuration► Power Management► Serial Console Redirection► USB Configuration► TPM 2.0 Configuration► Onboard Devices Configuration► Hardware Monitor► BIOS Watchdog Timer► Network Stake Configuration► Intel® Ethernet Controller (3) I225-V</td><td>► System Agent (SA) Configuration► PCH-I/O Configuration- PCH digital I/O device</td><td>- Administrator Password- User Password► Secure Boot menu► Security Configuration</td></tr><tr><td>Boot</td><td>Save &amp; Exit</td><td>MEBx</td><td rowspan="2"></td></tr><tr><td>- Setup Prompt Timeout- Bootup NumLock State- Quiet Boot- Fast Boot- Boot Option #1- Boot Option #2- Boot Option #3- Boot Option #4- Boot Option #5- Boot Option #6- Boot Option #7- Boot Option #8- Boot Option #9- Boot Option #10- Boot Option #11</td><td>Exits the BIOS Setup Utility while saving or discard the changes madeSave Changes and ExitDiscard Changes and ExitSave Changes and ResetDiscard Changes and ResetSave ChangesDiscard ChangesRestore DefaultsSave as User DefaultsRestore User DefaultsLaunch EFI Shell from filesystem device</td><td>- Intel(R) ME Password</td></tr></table>

Notes:
► indicates a submenu
Gray text indicates info only
Bold italics font indicates default setting

# Main Menu

Upon entering the BIOS Setup Utility, the Main Menu is displayed, providing read-only information about your system and also allows you to set the System Date and Time. Refer to the tables below for details of the submenus and settings.

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>System Date</td><td>xxx mm/dd/yyyy</td><td>Sets the date. Use Tab to switch between date elements.</td></tr><tr><td>System Time</td><td>hh:mm:ss</td><td>Sets the time. Use Tab to switch between time elements.</td></tr></table>

# Advanced Menu

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>▶ CPU Configuration</td><td></td><td>CPU Configuration</td></tr><tr><td>▶ Power Management</td><td></td><td>System ACPI Parameters</td></tr><tr><td>▶ Serial Console Redirection</td><td></td><td>Serial Console Redirection</td></tr><tr><td>▶ USB Configuration</td><td></td><td>USB Configuration Parameters</td></tr><tr><td>▶ TPM 2.0 Configuration</td><td></td><td>TPM 2.0 Configuration</td></tr><tr><td>▶ Onboard Devices Configuration</td><td></td><td>Onboard Device Parameters</td></tr><tr><td>▶ Hardware Monitor</td><td></td><td>Monitor hardware status</td></tr><tr><td>▶ BIOS Watchdog Timer</td><td></td><td>BIOS Watch Dog Configuration</td></tr><tr><td>▶ Network Stake</td><td></td><td>Network Stack Settings</td></tr><tr><td>▶ Intel® Ethernet Controller I225-V</td><td></td><td>Configure Gigabit Ethernet device parameters</td></tr></table>

# 6.3.1 Advanced > CPU Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Hyper-threading</td><td>EnabledDisabled</td><td>Enable or Disable Hyper-Threading Technology</td></tr><tr><td>Active Performance-cores</td><td>All76543210</td><td>Number of P-cores to enable in each processor package. Note: Number of Cores and E-cores are looked at together. When both are {0,0}, Pcode will enable all cores.</td></tr><tr><td>Active Efficient-cores</td><td>All76543210</td><td>Number of E-cores to enable in each processor package. Note: Number of Cores and E-cores are looked at together. When both are {0,0}, Pcode will enable all cores.</td></tr><tr><td>Intel (VMX) Virtualization Technology</td><td>EnabledDisabled</td><td>When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology.</td></tr><tr><td>Intel(R) SpeedStep(TM)</td><td>EnabledDisabled</td><td>Allow more than two frequency ranges to be supported.</td></tr><tr><td>Intel(R) Speed Shift Technology</td><td>EnabledDisabled</td><td>Enable/Disable Intel(R) Speed Shift Technology Support. Enabling will expose the CPPC v2 interface to allow for hardware-controlled P-states.</td></tr><tr><td>C states</td><td>DisabledEnabled</td><td>Enable/Disable CPU Power Management. Allows CPU to go to C states when it's not 100% utilized.</td></tr></table>

6.3.2 Advanced > Power Management

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Power Supply Unit</td><td>ATX ModeEmulate AT Mode</td><td>Select Emulation AT or ATX function. If this option set to [Emulation AT], BIOS will report no suspend functions (S3 &amp; S4) to ACPI OS. In windows XP, it will make OS show shutdown message during system shutdown. ATX: OS will turn off system power when shutdown.</td></tr><tr><td>State After G3</td><td>S0 StateS5 State</td><td>Specify what state to go to when power is re-applied after a power failure (G3 states).</td></tr><tr><td>RTC Wake system from S5</td><td>DisabledFixed TimeDynamic Time</td><td>Enable or disable System wake on alarm event. Select FixedTime, system will wake on the hr::min::sec specified. Select DynamicTime, system will wake on the current time + Increase minutes(S).</td></tr><tr><td>Wake up hour</td><td>0</td><td>Range: 0-23 hr For example enter 3 for 3am and 15 for 3pm</td></tr><tr><td>Wake up minute</td><td>0</td><td>Range: 0-59 min</td></tr><tr><td>Wake up second</td><td>0</td><td>Range: 0-59 sec</td></tr><tr><td>Wake up minute increase</td><td>0</td><td>Range: 1-5 min</td></tr><tr><td>PCIe Wake</td><td>EnabledDisabled</td><td>Enable or disable PCI Express wake capability.</td></tr></table>

6.3.3 Advanced > Serial Console Redirection

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Console Redirection</td><td>DisabledEnabled</td><td>Console Redirection Enable or Disable</td></tr><tr><td>Terminal Type</td><td>ANSIVT100VT100PlusVT-UTF8</td><td>Emulation: ANSI: Extended ASCII char set. VT100:ASCII char set. VT100Plus: Extends VT100 to support color, function keys, etc. VT-UTF8: Uses UTF8 encoding to map Unicode chars onto 1 or more bytes.</td></tr><tr><td>Bites per second</td><td>1152009600192003840057600</td><td>Selects serial port transmission speed. The speed must be matched on the other side. Long or noisy lines may require lower speeds.</td></tr><tr><td>Data Bits</td><td>87</td><td>Data Bites</td></tr><tr><td>Parity</td><td>NoneEvenOddMarkSpace</td><td>A parity bit can be sent with the data bits to detect some transmission errors. Even: parity bit is 0 if the num of 1's in the data bits is even. Odd: parity bit is 0 if num of 1's in the data bits is odd. Mark: parity bit is always 1. Space: Parity bit is always 0. Mark and Space Parity do not allow for error detection.</td></tr><tr><td>Stop Bits</td><td>12</td><td>Stop bits indicates the end of a serial data packet. (A stat bit indicates the beginning). The standard setting is 1 stop bit. Communication with slow devices may requires more than 1 stop bit.</td></tr><tr><td>Flow Control</td><td>NoneHardware RTS/CTS</td><td>Flow control can prevent data loss from buffer overflow. When sending data, if the receiving buffers are full, a ‘stop’ signal can be sent to stop the data flow. Once the buffers are empty, a ‘start’ signal can be sent to re-start the flow. Hardware flow control uses tow wires to send start/stop signals.</td></tr><tr><td>VT-UTF8 Combo Key Support</td><td>EnabledDisabled</td><td>Enabled VT-UTF8 Combination Key Support for ANSI/VT100 terminals.</td></tr><tr><td>Recorder Mode</td><td>DisabledEnabled</td><td>With the mode enabled only text will be sent. This is to capture Terminal data.</td></tr><tr><td>Resolution 100x31</td><td>DisabledEnabled</td><td>Enables or disables extended terminal resolution.</td></tr><tr><td>Putty KeyPad</td><td>VT100LINUXXTERMR6SCOESCNVT400</td><td>Select FunctionKey and KeyPad on Putty.</td></tr></table>

6.3.4 Advanced > USB Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>USB Mass Storage Driver Support</td><td>EnabledDisabled</td><td>Enable/Disable USB Mass Storage Driver Support</td></tr><tr><td>USB transfer time-out</td><td>20 sec1 sec5 sec10 sec</td><td>The time-out value for Control, Bulk, and Interrupt transfers.</td></tr><tr><td>Device reset time-out</td><td>20 sec10 sec30 sec40 sec</td><td>USB mass storage device Start Unit command time-out.</td></tr><tr><td>Device power-up delay</td><td>AutoManual</td><td>Maximum time the device will take before it properly reports itself to the Host Controller.‘Auto’ uses default value: for a Root port it is 100 ms, for a Hub port the delay is taken from Hub descriptor.</td></tr></table>

6.3.5 Advanced > TPM 2.0 Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Security Device Support</td><td>EnableDisable</td><td>Enables or Disables BIOS support for security device. O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available.</td></tr><tr><td>SHA256 PCR Bank</td><td>EnabledDisabled</td><td>Enable or Disable SHA256 PCR Bank</td></tr><tr><td>SHA384 PCR Bank</td><td>DisabledEnabled</td><td>Enable or Disable SHA384 PCR Bank</td></tr><tr><td>Pending operation</td><td>NoneTPM Clear</td><td>Schedule an Operation for the Security Device.NOTE: Your computer will reboot during restart in order to change State of Security Device.</td></tr><tr><td>Platform Hierarchy</td><td>EnabledDisabled</td><td>Enable or Disable Platform Hierarchy</td></tr><tr><td>Storage Hierarchy</td><td>EnabledDisabled</td><td>Enable or Disable Storage Hierarchy</td></tr><tr><td>Endorsement Hierarchy</td><td>EnabledDisabled</td><td>Enable or Disable Endorsement Hierarchy</td></tr><tr><td>Physical Presence Spec Version</td><td>1.31.2</td><td>Select to Tell O.S. to support PPI Spec Version 1.2 or 1.3. Note some HCK tests might not support 1.3.</td></tr><tr><td>PH Randomization</td><td>EnabledDisabled</td><td>Enables or Disables Platform Hierarchy randomization. DO NOT ENABLE THIS QUESTION IN</td></tr></table>

6.3.6 Advanced > Onboard Devices Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>COM1 Mode Control</td><td>RS232RS422RS485</td><td>Select COM1 mode. RS232, RS422, RS485</td></tr><tr><td>COM2 Mode Control</td><td>RS232RS422RS485</td><td>Select COM1 mode. RS232, RS422, RS485</td></tr><tr><td>LAN #1</td><td>EnabledDisabled</td><td>Enable/Disable</td></tr><tr><td>LAN #2</td><td>EnabledDisabled</td><td>Enable/Disable</td></tr></table>

6.3.7 Advanced > BIOS Watchdog Timer

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>BIOS POST Watchdog</td><td>DisabledSecond ModeMinute Mode</td><td>1. Disable: Disable Watchdog Timer; 2. Second Mode: Enable Watchdog Timer in second mode; 3. Minute Mode: Enable Watchdog Timer in minute mode.</td></tr><tr><td>BIOS Watchdog Timer</td><td>1</td><td>Set watchdog timer for BIOS POST process. Minute Mode</td></tr><tr><td>BIOS Watchdog Timer</td><td>15</td><td>Set watchdog timer for BIOS POST process. Second Mode</td></tr></table>

6.3.8 Advanced > Network Stack Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Network Stack</td><td>DisabledEnabled</td><td>Enable/Disable UEFI Network Stack</td></tr><tr><td>IPv4 PXE Support</td><td>DisabledEnabled</td><td>Enable/Disable IPv4 PXE boot support. If disabled, IPv4 PXE boot support will not be available.</td></tr><tr><td>IPv4 HTTP Support</td><td>DisabledEnabled</td><td>Enable/Disable IPv4 HTTP boot support. If disabled, IPv4 HTTP boot support will not be available.</td></tr><tr><td>IPv6 PXE Support</td><td>DisabledEnabled</td><td>Enable/Disable IPv6 PXE boot support. If disabled, IPv6 PXE boot support will not be available.</td></tr><tr><td>IPv6 HTTP Support</td><td>DisabledEnabled</td><td>Enable/Disable IPv6 HTTP boot support. If disabled, IPv6 HTTP boot support will not be available.</td></tr><tr><td>PXE boot wait time</td><td>0</td><td>Wait time in seconds to press ESC key to abort the PXE boot. Use either +/- or numeric keys to set the value.</td></tr><tr><td>Media detect count</td><td>1</td><td>Number of times the presence of media will be checked. Use either +/- or numeric keys to set the value.</td></tr></table>

Chipset

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>► System (SA) Configuration</td><td></td><td>System Agent (SA) Parameters</td></tr><tr><td>► PCH-IO Configuration</td><td></td><td>PCH Parameters</td></tr><tr><td>PCH digital I/O device</td><td>DisabledEnable</td><td>Disable/Enable ACPI GPIO Device support for PCH digital I/O and user LED</td></tr></table>

6.4.1 Chipset > System Agent (SA) Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>► Memory Configuration</td><td></td><td>Memory Configuration Parameters</td></tr><tr><td>► Graphics Configuration</td><td></td><td>Graphics Configuration</td></tr><tr><td>VT-d</td><td>EnabledDisabled</td><td>VT-d capability</td></tr></table>

6.4.2 Chipset > System Agent (SA) Configuration > Graphics Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>GTT Size</td><td>8MB2MB4MB</td><td>Select the GTT Size</td></tr><tr><td>Aperture Size</td><td>256MB128MB512MB1024MB2048MB</td><td>Select the Aperture SizeNote : Above 4GB MMIO BIOS assignment is automatically enabled when selecting &gt; 2048MB aperture. To use this feature, please disable CSM Support.</td></tr><tr><td>DVMT Pre-Allocated</td><td>32M4M8M16M64M</td><td>Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphics Device</td></tr></table>

6.4.3 Chipset > PCH-IO Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>▶ SATA Configuration</td><td></td><td>SATA Device Options Settings</td></tr><tr><td>▶ NVMe Configuration</td><td></td><td>NVMe Device Options Settings</td></tr></table>

6.4.4 Chipset > SATA Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>SATA Mode Selection</td><td>AHCI</td><td>Determines how SATA controller(s) operate.</td></tr><tr><td>SATA Controller Speed</td><td>Gen3DefaultGen1Gen2</td><td>Indicates the maximum speed the SATA controller can support.</td></tr><tr><td>Serial ATA Port 1</td><td>EnabledDisabled</td><td>Enable or Disable SATA Port</td></tr></table>

Security

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Administrator Password</td><td></td><td>Set Administrator Password</td></tr><tr><td>User Password</td><td></td><td>Set User Password</td></tr><tr><td>▶ Secure Boot menu</td><td></td><td>Secure Boot configuration</td></tr><tr><td>▶ Security Configuration</td><td></td><td>Security Configuration settings</td></tr></table>

6.5.1 Security > Security Boot Menu

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Secure Boot Control</td><td>DisabledEnabled</td><td>Secure Boot feature is Active if Secure Boot is Enabled, Platform key(PK) is enrolled and the system is in User mode. The mode change requires platform reset.</td></tr><tr><td>Secure Boot Mode</td><td>StandardCustom</td><td>Secure Boot mode options: Standard or Custom.In Custom mode, Secure Boot Policy variables can be configured by a physically present user without full authentication</td></tr></table>

6.5.2 Security > Security Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>BIOS Lock</td><td>EnabledDisabled</td><td>Enable/Disable the PCH BIOS Lock Enable feature. Required to be enabled to ensure SMM protect of flash.</td></tr></table>

Boot

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Setup Prompt Timout</td><td>1</td><td>Number of seconds to wait for setup activation key. The maximum value is 8.</td></tr><tr><td>Bootup NumLock State</td><td>OffOn</td><td>Select the keyboard NumLock state</td></tr><tr><td>Quiet Boot</td><td>EnabledDisabled</td><td>Enables or disables Quiet Boot option</td></tr><tr><td>Fast Boot</td><td>Disable LinkEnabled</td><td>Enables or disables boot with initialization of a minimal set of devices required to launch active boot option.Has no effect for BBS boot options.</td></tr><tr><td>Boot Option #1</td><td>Hard DiskNVMEUEFI APCD/DVDSDUSB Hard DiskUSB CD/DVDUSB KeyUSB FloppyUSB LanNetworkDisabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #2</td><td>NVMEHard DiskUEFI APCD/DVDSDUSB Hard DiskUSB CD/DVDUSB KeyUSB FloppyUSB LanNetworkDisabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #3</td><td>UEFI APHard DiskNVMECD/DVDSDUSB Hard DiskUSB CD/DVDUSB KeyUSB FloppyUSB LanNetworkDisabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #4</td><td>CD/DVDHard DiskNVMEUEFI APSDUSB Hard DiskUSB CD/DVDUSB KeyUSB FloppyUSB LanNetworkDisabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #5</td><td>SDHard DiskNVMEUEFI APCD/DVDUSB Hard DiskUSB CD/DVDUSB KeyUSB FloppyUSB LanNetworkDisabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #6</td><td>USB Hard DiskHard DiskNVMEUEFI APCD/DVDSDUSB CD/DVDUSB KeyUSB FloppyUSB LanNetworkDisabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #7</td><td>USB CD/DVDHard DiskNVMEUEFI APCD/DVDSDUSB Hard DiskUSB KeyUSB FloppyUSB LanNetworkDisabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #8</td><td>USB KeyHard DiskNVMEUEFI APCD/DVDSDUSB Hard DiskUSB CD/DVDUSB FloppyUSB LanNetworkDisabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #9</td><td>USB FloppyHard DiskNVMEUEFI APCD/DVDSDUSB Hard DiskUSB CD/DVDUSB KeyUSB LanNetworkDisabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #10</td><td>USB LanHard DiskNVMEUEFI APCD/DVDSDUSB Hard DiskUSB CD/DVDUSB KeyUSB FloppyNetworkDisabled</td><td>Sets the system boot order</td></tr></table>

Save & Exit

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Save Changes and Exit</td><td></td><td>Exit system setup after saving the changes.</td></tr><tr><td>Discard Changes and Exit</td><td></td><td>Exit system setup without saving any changes.</td></tr><tr><td>Save Changes and Reset</td><td></td><td>Reset the system after saving the changes.</td></tr><tr><td>Discard Changes and Reset</td><td></td><td>Reset the system without saving any changes.</td></tr><tr><td>Save Changes</td><td></td><td>Save Changes done so far to any of the setup options.</td></tr><tr><td>Discard Changes</td><td></td><td>Discard Changes done so far to any of the setup options.</td></tr><tr><td>Restore Defaults</td><td></td><td>Restore/Load Default values for all the setup options.</td></tr><tr><td>Save as User Defaults</td><td></td><td>Save the changes done so far as User Defaults.</td></tr><tr><td>Restore User Defaults</td><td></td><td>Restore the User Defaults to all the setup options</td></tr><tr><td>Launch EFI Shell from filesystem device</td><td></td><td>Attemps to Launch EFI Shell application (Shell.efi) from one of the available filesystem devices</td></tr></table>

MEBx

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Intel(R) ME Password</td><td></td><td>MEBx Login</td></tr><tr><td>Intel(R) AMT</td><td>DisabledEnable</td><td></td></tr></table>

7. Appendix A M.2 Pin Definition

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>M2B_CONFIG_3</td><td>2</td><td>P_+3V3_NGFF_B</td><td>3</td><td>GND</td></tr><tr><td>4</td><td>P_+3V3_NGFF_B</td><td>5</td><td>GND</td><td>6</td><td>PU 100K to P_+3V3_NGFF_B</td></tr><tr><td>7</td><td>U2_USB10_P</td><td>8</td><td>NC</td><td>9</td><td>U2_USB10_N</td></tr><tr><td>10</td><td>NC</td><td>11</td><td>GND</td><td>20</td><td>NC</td></tr><tr><td>21</td><td>M2B_CONFIG_0</td><td>22</td><td>NC</td><td>23</td><td>NC</td></tr><tr><td>24</td><td>NC</td><td>25</td><td>NC</td><td>26</td><td>W_DISABLE2#</td></tr><tr><td>27</td><td>GND</td><td>28</td><td>NC</td><td>29</td><td>U3_P2_RX_N</td></tr><tr><td>30</td><td>UIM_RST</td><td>31</td><td>U3_P2_RX_P</td><td>32</td><td>UIM_CLK</td></tr><tr><td>33</td><td>GND</td><td>34</td><td>UIM_DATA</td><td>35</td><td>U3_P2_TX_N</td></tr><tr><td>36</td><td>P_UIM_PWR</td><td>37</td><td>U3_P2_TX_P</td><td>38</td><td>NC</td></tr><tr><td>39</td><td>GND</td><td>40</td><td>NC</td><td>41</td><td>X_PCIEX1_P1_RX_N</td></tr><tr><td>42</td><td>NC</td><td>43</td><td>X_PCIEX1_P1_RX_P</td><td>44</td><td>NC</td></tr><tr><td>45</td><td>GND</td><td>46</td><td>NC</td><td>47</td><td>X_PCIEX1_P1_TX_N</td></tr><tr><td>48</td><td>NC</td><td>49</td><td>X_PCIEX1_P1_TX_P</td><td>50</td><td>PCH_PLTRST-L_BUF</td></tr><tr><td>51</td><td>GND</td><td>52</td><td>PCH_CLK_REQ_P5_N</td><td>53</td><td>C_REFCLK_P5_100M_N</td></tr><tr><td>54</td><td>NC</td><td>55</td><td>C_REFCLK_P5_100M_P</td><td>56</td><td>NC</td></tr><tr><td>57</td><td>GND</td><td>58</td><td>NC</td><td>59</td><td>NC</td></tr><tr><td>60</td><td>NC</td><td>61</td><td>NC</td><td>62</td><td>NC</td></tr><tr><td>63</td><td>NC</td><td>64</td><td>NC</td><td>65</td><td>NC</td></tr><tr><td>66</td><td>UIM_DET</td><td>67</td><td>NC</td><td>68</td><td>NC</td></tr><tr><td>69</td><td>M2B_CONFIG_1</td><td>70</td><td>P_+3V3_NGFF_B</td><td>71</td><td>GND</td></tr><tr><td>72</td><td>P_+3V3_NGFF_B</td><td>73</td><td>GND</td><td>74</td><td>P_+3V3_NGFF_B</td></tr><tr><td>75</td><td>M2B_CONFIG_2</td><td></td><td></td><td></td><td></td></tr></table>

# Safety Instructions

For user safety, please read and follow all instructions, Warnings, Cautions, and Notes marked in this manual and on the associated device before handling/operating the device, to avoid injury or damage.

S'il vous plaît prêter attention stricte à tous les avertissements et mises en garde figurant sur l'appareil , pour éviter des blessures ou des dommages.

► Read these safety instructions carefully.
► Keep the User’s Manual for future reference.
► Read the Specifications section of this manual for detailed information on the recommended operating environment.
► When installing/mounting or uninstalling/removing device; or when removal of a chassis cover is required for user servicing (See “Getting Started”):
[> Turn off power and unplug any power cords/cables.
[> Reinstall all chassis covers before restoring power.
► To avoid electrical shock and/or damage to device:
[> Keep device away from water or liquid sources.
[> Keep device away from high heat or humidity.
[> Keep device properly ventilated (do not block or cover ventilation openings).
[> Always use recommended voltage and power source settings.
[> Always install and operate device near an easily accessible electrical outlet.
[> Secure the power cord (do not place any object on/over the power cord) and connect it to a socket-outlet with earthing connection.
[> Only install/attach and operate device on stable surfaces and/or recommended mountings.
► If the device will not be used for long periods of time, turn off and unplug from its power source.
► Never attempt to repair the device, which should only be serviced by qualified technical personnel using suitable tools.
► A Lithium-type battery may be provided for uninterrupted backup or emergency power.

![The image displays a standard yellow warning triangle with a black border and a black exclamation point in the center. Below the symbol, the word 'CAUTION:' appears in black capital letters.](.mxe-310-series-user-manual-50m-41062-1000-10/5a7e8de9494936fe68459427af842349f653e811a89dc20b3d2b7853ad6430d0.jpg)

Risk of explosion if battery is replaced with one of an incorrect type; please dispose of used batteries appropriately.

Risque d’explosion si la pile est remplacée par une autre de type incorrect. Veuillez jeter les piles usagées de façon appropriée.

► The device must be serviced by authorized technicians when:

[> The power cord or plug is damaged.
[> Liquid has entered the device interior.
[> The device has been exposed to high humidity and/or moisture.
[> The device is not functioning or does not function according to the User’s Manual.
[> The device has been dropped and/or damaged and/or shows obvious signs of breakage.

? Disconnect the power supply cord before loosening the thumbscrews and always fasten the thumbscrews with a screwdriver before starting the system up.

[> The equipment is not intended to be installed or used in a home, school, or public area accessible to the general population.
[> The knurled thumb screws with slotted heads for each Node module should be tightened with a tool after both initial installation and subsequent use.

► It is recommended that the device be installed only in a server room or computer room where access is:

[> Restricted to qualified service personnel or users familiar with restrictions applied to the location, reasons therefore, and any precautions required.

[> Only afforded by the use of a tool or lock and key, or other means of security, and controlled by the authority responsible for the location.

► Please use an approved power source certified by IEC or UL. If you need an adapter, optional accessories, or further assistance, please contact ADLINK for more information.

![The image shows a yellow triangular warning sign with a thick black border. Inside the triangle is a black graphic consisting of a horizontal line at the bottom and three wavy vertical lines rising above it, which is the standard symbol for a hot surface or heat hazard.](.mxe-310-series-user-manual-50m-41062-1000-10/c13ca29b9b091fd823f4af15d78832afac0d6a8aa0c84609c6059fa777fb9b29.jpg)

# BURN HAZARD

Touching this surface could result in bodily injury. To reduce risk, allow the surface to cool before touching.

# RISQUE DE BRÛLURES

Ne touchez pas cette surface, cela pourrait entraîner des blessures. Pour éviter tout danger, laissez la surface refroidir avant de la toucher.

► Lisez attentivement ces consignes de sécurité
► Conservez le manuel de l'utilisateur pour pouvoir le consulter ultérieurement
Lisez la section Spécifications de ce manuel pour des informations détaillées sur l'environnement d'exploitation recommandé
Lors de l'installation/montage ou de la désinstallation/retrait de l'appareil ; ou lorsque le retrait d'un boîtier est nécessaire pour l'entretien par l'utilisateur (voir Mise en route) :
► Éteignez l'alimentation et débranchez tous les cordons/câbles d'alimentation.
► Réinstallez tous les panneaux du boîtier avant de remettre l'alimentation sous tension.
► Pour éviter les chocs électriques et/ou d’endommager l’appareil :

► Tenez l'appareil à l'écart de toute source d'eau ou de liquide
► Tenez l'appareil à l'écart d'une forte chaleur ou d'une humidité élevée
► Maintenez l'appareil correctement ventilé (n'obstruer ou ne couvrez pas les ouvertures de ventilation)
► Utilisez toujours les réglages de tension et de source d'alimentation recommandés
► Installez et utilisez toujours l'appareil près d'une prise de courant facilement accessible
Fixez le cordon d'alimentation (ne placez aucun objet sur/au-dessus du cordon d'alimentation) et connectez-le à une prise de courant avec mise à la terre

► N'essayez jamais de réparer l'appareil, qui doit être réparé uniquement par du personnel technique qualifié et utilisant des outils appropriés.

► Lors de l'installation/montage ou de la désinstallation/retrait d'un périphérique, ou lorsque le retrait d'un couvercle de châssis est requis pour l'entretien par l'utilisateur :
► Coupez l’alimentation et débranchez tous les cordons/câbles d’alimentation.

► Réinstallez tous les capots du châssis avant de rétablir l'alimentation. Installez/fixez et utilisez l'appareil uniquement sur des surfaces stables et/ou des supports recommandés.

► Si l'appareil n'est pas utilisé pendant une longue période, éteignez-le et débranchez-le de sa source d'alimentation.

► Une batterie de type lithium peut être fournie pour une alimentation de secours ou de secours ininterrompue.

► L'appareil doit être réparé par des techniciens agréés lorsque :
► Le cordon d'alimentation ou la fiche est endommagé.
► Du liquide est entré dans l’appareil. € L'appareil a été exposé à une humidité élevée et/ou à l'humidité.
► L'appareil ne fonctionne pas ou ne fonctionne pas conformément au manuel de l'utilisateur.

► L'appareil est tombé et/ou a été endommagé et/ou présente des signes évidents de casse.
► Débranchez le cordon d'alimentation avant de desserrer les vis moletées et fixez toujours les vis moletées avec un tournevis avant de démarrer le système.
L'équipement n'est pas destiné à être installé ou utilisé dans une maison, une école ou une zone publique accessible au grand public.
Les vis à molette avec têtes fendue pour chaque module Node doivent être serrées avec un outil après l'installation initiale et lors de l'utilisation suivante.
► Il est recommandé d'installer l'appareil uniquement dans une salle de serveurs ou une salle informatique dont l'accès est :

Réservé au personnel de service qualifié ou aux utilisateurs familiers avec les restrictions appliquées à l'emplacement, les raisons de celles-ci et les précautions requises.
Autorisé uniquement par l'utilisation d'un outil ou d'une serrure et d'une clé, ou d'autres moyens de sécurité, et contrôlé par l'autorité responsable du lieu.

Veuillez utiliser une source d'alimentation approuvée et certifiée par la norme IEC ou UL. Si vous avez besoin d'un adaptateur, d'accessoires en option ou d'une assistance supplémentaire, veuillez contacter ADLINK pour plus d'informations.

# Getting Services

Ask an Expert: https://www.adlinktech.com/en/Askanexpert

# ADLINK Technology, Inc.

Address: No. 66, Huaya 1st Rd., Guishan District Taoyuan City 333411, Taiwan

Tel: +886-3-216-5088

Fax: +886-3-328-5706

Email: service@adlinktech.com

# Ampro ADLINK Technology, Inc.

Address: 6450 Via Del Oro, San Jose, CA 95119, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

Fax: +1-408-600-1189

Email: info@adlinktech.com

# ADLINK Technology (China) Co., Ltd.

Address: 300 Fang Chun Rd., Zhangjiang Hi-Tech Park, Pudong New Area Shanghai, 201203 China

Tel: +86-21-5132-8988

Fax: +86-21-5132-3588

Email: market@adlinktech.com

# ADLINK Technology GmbH

Address: Hans-Thoma-Strasse 8-10, 68163 Mannheim, Germany

Tel: +49-621-43214-0

Fax: +49-621 43214-30

Email: emea@adlinktech.com

Please visit the Contact page at www.adlinktech.com for information on how to contact the ADLINK regional office nearest you.
[🔗 Link to the original document](.mxe-310-series-user-manual-50m-41062-1000-10/mxe-310-series-user-manual-50m-41062-1000-10.pdf)