# NEON-1000-MDX Series
AI Smart Camera
User’s Manual
Manual Rev.: 1.0
Revision Date: August 26, 2020
Part No: 50-1Z331-1000
Revision History
| Revision | Release Date | Description of Change(s) |
| 1.0 | 2020-08-26 | Initial release |
# Preface
Copyright © 2020 ADLINK Technology, Inc.
This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.
# Disclaimer
The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
# Environmental Responsibility
ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.
# Trademarks
Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.
# Conventions
Take note of the following conventions used throughout this manual to make sure that users perform certain tasks and instructions properly.
NOTE:
Additional information, aids, and tips that help users perform tasks.
CAUTION:
Information to prevent minor physical injury, component damage, data loss, and/or program corruption when trying to complete a task.
ATTENTION: Informations destinées à prévenir les blessures corporelles mineures, les dommages aux composants, la perte de données et/ou la corruption de programme lors de l'exécution d'une tâche.
WARNING:
Information to prevent serious physical injury, component damage, data loss, and/or program corruption when trying to complete a specific task.
AVERTISSEMENT: Informations destinées à prévenir les blessures corporelles graves, les dommages aux composants, la perte de données et/ou la corruption de programme lors de l'exécution d'une tâche spécifique.
# Table of Contents
# Revision History........ ii
# Preface ............. iii
# List of Figures ........ .... vii
# List of Tables ......... ix
# 1 Introduction ......
1.1 Overview ...... 1
1.2 Features... 2
1.3 General Specifications.... 3
1.4 Mechanical Dimensions. 5
1.4.1 Camera Dimensions .... 5
1.4.2 USB Type-C Screw Lock Location and Dimensions .. 5
1.4.3 LED Light Mounting Thread.. 6
# 2 Connectors and I/O ...... 7
2.1 Bottom Side I/O and Connector Description...... 8
2.1.1 D-sub I/O Connector.... 9
2.2 Top Side I/O and Connector Description .. 1 1
2.3 Front Side I/O and Connector Description.. . 12
# 3 Getting Started ..... 1 3
3.1 Mounting the Device .... 13
3.2 Digital I/O Connections . . 14
3.3 Attaching a Lens ..... 1 5
3.4 Power and Peripheral Connections ..... 16
3.5 Image Capture and Inference .... 1 8
3.5.1 Image Capture Sample Code .... .. 18
3.5.2 Image Capture and Inference Sample Code ............ 20
# 3.6 Using the Basler pylon Utility . 22
3.6.1 Capturing Images with pylon ....... .... 22
3.6.2 Modifying Image Sensor Settings with pylon ............ 24
3.6.3 Using APIs to Modify Image Sensor Settings ........... 32
# Important Safety Instructions........ .. 33
# Consignes de Sécurité Importante ........ . 35
# Getting Service ......... .. 37
# List of Figures
Figure 2-1: NEON-1000-MDX Orientation ... 7
Figure 2-2: Bottom Side I/O and Connectors... . 8
Figure 2-3: D-sub I/O Connector.. 9
Figure 2-4: Top Side I/O and Connectors ... . 11
Figure 2-5: Front Side I/O and Connectors... .. 12
Figure 3-1: NEON-1000-MDX Mounting Holes. . 13
Figure 3-2: Digital Input Schematic Diagram ..... ... 14
Figure 3-3: Digital Output Schematic Diagram.... . 14
Figure 3-4: Lens Attachment Assembly . . 15
Figure 3-5: Separate Power and Peripheral Connections................ 16
Figure 3-6: Combined Power and Peripheral Connections.............. 17
Figure 3-7: Single-Shot Image Capture . . 19
Figure 3-8: Continuous Image Capture... .. 20
Figure 3-9: Image Capture and Inference.. . 21
This page is intentionally left blank.
# List of Tables
Table 1-1: NEON-1000-MDX Model and Sensor Specifications . 1
Table 2-1: Bottom Side I/O and Connectors... 8
Table 2-2: D-sub I/O Connector Pin Definitions.. . 9
Table 2-3: D-sub I/O Connector Specifications .. . 10
Table 2-4: Top Side I/O and Connectors ..... . 11
Table 2-5: Front Side I/O and Connectors..... . 12
This page is intentionally left blank.
# 1 Introduction
# 1.1 Overview
The NEON-1000-MDX series is an open camera platform equipped with an Intel Atom® E3930 processor and Intel® Movidius™ Myriad™ X MA2485 VPU that provide image capture and inferencing capabilities. The NEON-1000-MDX is designed for deep learning inference and other vision applications that require a compact device. The system comprises a CPU, VPU, and image sensor, and the vertical I/O orientation reduces space requirements and minimizes cabling, compatibility, and reliability issues. The following table lists the current NEON-1000-MDX models and their respective sensor specifications.
| Model Name | Image Sensor Specification | Image Sensor Module |
| NEON-101B-MDX | 1/3", 1.2M, Global Shutter, 1280x960, 54fps, Color | Basler, daA1280-54uc-CS |
| NEON-102B-MDX | 1/1.8", 1.9M, Global Shutter, 1600x1200, 60fps, Color | Basler, daA1600-60uc-CS |
| NEON-103B-MDX | 1/3.7", 2M, Rolling Shutter, 1920x1080, 30fps, Color | Basler, daA1920-30uc-CS |
| NEON-104B-MDX | 1/2.5", 5M, Rolling Shutter, 2592x1944, 14fps, Color | Basler, daA2500-14uc-CS |
Table 1-1: NEON-1000-MDX Model and Sensor Specifications
# 1.2 Features
All-in-one design reduces space requirements and minimizes cabling, installation, and maintenance effort
Intel Atom® E3930 processor, Intel® Movidius™ Myriad™ X MA2485 VPU, image sensor, and FPGA-based I/O integration designed for the image processing vertical market
USB 3.0 sensor interface compatible with most machine vision software
USB Type-C connector with DC power and DisplayPort support to reduce cabling
One microSD slot for easy storage expansion
Highly integrated and compact system for easy deployment
# 1.3 General Specifications
Lens mount: C-mount
Total weight: <700g (without lens)
Operating temperature: $4 5 \textdegree$ (tested with both Intel® HD Graphics 500 and VPU enabled, running YOLOv3; airflow 0.6 m/s)
Power consumption: <30W
Compute module:
CPU: Intel Atom® E3930, dual-core, 1.8 GHz
VPU: Intel® Movidius™ Myriad™ X MA2485
Memory: 4 GB DDR3
Storage: 32 GB eMMC
Camera I/O and connectors
1x USB Type-C for power input and DisplayPort support
1x DC jack for 12V DC input
1x GbE Ethernet port
1x 15-pin D-sub for DI/O and COM which includes:
4x GPI/O, including 1x Camera Trigger In and 1x Trigger Out
1x COM
1x microSD slot for external storage
NOTE:
1. When powering from the DC jack, the USB Type-C connector provides up to 3W of power to an external device such as a USB Type-C hub. Devices that require more than 3W cannot be used.
2. DC power can be supplied either from the USB Type-C port or DC jack.
3. Use only recommended ADLINK power adapters.
<table> | NEON-101B-MDX | NEON-102B-MDX | NEON-103B-MDX | NEON-104B-MDX |
| Processor | Intel Atom® E3930 |
| VPU | Intel® MovidiusTM MyriadTM X MA2485 |
| Display Output | DisplayPort over USB Type-C, 1920x1080 @ 30fps |
| Image Sensor Resolution | 1280x960 | 1600x1200 | 1920x1080 | 2592x1944 |
| Image Sensor Size | 1/3” | 1/1.8” | 1/3.7” | 1/2.5” |
| Frame Rate (fps) | 54 | 60 | 30 | 14 |
| Shutter | Global | Rolling |
| Color/Mono | Color |
| Image Sensor Trigger Mode | External trigger (see note below), software trigger, free run |
| Digital Input | 4x DI, includes 1x sensor trigger |
| Digital Output | 4x DO, includes 1x strobe out |
| UART | TXD, RXD, GND |
| Dimensions/Weight | 123.3 x 66.81 x 77.5 mm; 700g |
| Power Supply | DC power from USB Type-C connector or DC jack |
| USB | 1x USB OTG port; 1x USB 3.0 and 1x USB 2.0 from USB Type-C connector |
NOTE:
In External Trigger Mode, you can adjust the sensor exposure time in the Basler pylon utility.
# 1.4 Mechanical Dimensions
This section provides dimensions and related mechanical information for the NEON-1000-MDX.
# 1.4.1 Camera Dimensions
# 1.4.2 USB Type-C Screw Lock Location and Dimensions
Dimensions: mm
# 1.4.3 LED Light Mounting Thread
# 2 Connectors and I/O
This chapter includes the locations and descriptions of the connectors and I/O on the NEON-1000-MDX.
Figure 2-1: NEON-1000-MDX Orientation
# 2.1 Bottom Side I/O and Connector Description
Figure 2-2: Bottom Side I/O and Connectors
| Item | Description |
| 1 | DC jack for DC input with included ADLINK AC/DC adapter (P/N 31-62156-1000-A0)Power input: 12V DC at >30 W |
| 2 | USB Type-C connector w/ screw lockSupports DisplayPort (up to 1080P @ 30 fps)The NEON-1000-MDX can be powered using either this port or the DC jack |
| 3 | 1 GbE LAN at 10/100/1000 Mbit/s |
| 4 | 15-pin D-sub I/O connector for the digital I/O and UART. Use to connect external I/O devices such as sensors, COM and LED/strobe controllers. |
Table 2-1: Bottom Side I/O and Connectors
# 2.1.1 D-sub I/O Connector
Figure 2-3: D-sub I/O Connector
| Pin | Function | Pin | Function |
| 1 | UART - TX | 2 | DI/O GND |
| 3 | Digital output 0/Strobe output 0 (see Note 2) | 4 | Digital output 1 |
| 5 | Digital output 2 | 6 | Digital output 3 |
| 7 | UART GND | 8 | Reserved |
| 9 | UART – RX | 10 | DI/O GND |
| 11 | Digital input 0/Trigger input 0 (see note 1) | 12 | Digital input 1 |
| 13 | Digital input 2 | 14 | Digital input 3 |
| 15 | Reserved | - | - |
Table 2-2: D-sub I/O Connector Pin Definitions
NOTE:
1. Pin 11 (Digital input 0/Trigger input 0) is programmable. When configured for trigger input, pin 11 is used for hardware triggering of the image sensor. Connect an external sensor signal to pin 11 and set the camera to hardware trigger mode to enable real-time or hardware triggered image capture.
2. Pin 3 (Digital output 0/Strobe output 0) is programmable. When configured for strobe output, pin 3 can be connected to an LED light/strobe controller to adjust the timing latency/delay according to the camera connected to pin 11.
| I/O Category | Specifications |
| UART | Baud rate: 115200bps @ 8N1 |
| I/O Category | Specifications |
| Digital input | Common sharing: | 1 common for sharing ground |
| Input range: | 0-5 VDC |
| High level threshold: | 2-5 VDC |
| Low level threshold: | 0-0.8 VDC |
| Digital output | Open-collector | Input voltage range | 3.3-30 VDC |
| Maximum sink current | 100 mA |
Table 2-3: D-sub I/O Connector Specifications
# 2.2 Top Side I/O and Connector Description
Figure 2-4: Top Side I/O and Connectors
| Item | Description |
| 5 | Power status LED. Lights green when connected to power. |
| 6 | Operating system status LED. Flashes orange when the system is booting, and lights when the system has booted successfully. |
| 7 | microSD card slot for additional storage. An optional 32 GB microSD card is available from ADLINK. (P/N 29-F0500-1020) |
| 8 | Wafer connector (reserved)See “System Flash” on page 39. |
| 9 | Micro-USB Type-A port. This connector supports USB 2.0.See “System Flash” on page 39. |
Table 2-4: Top Side I/O and Connectors
# 2.3 Front Side I/O and Connector Description
Figure 2-5: Front Side I/O and Connectors
| Item | Description |
| 10 | C-mount type lens mount |
| 11 | Image sensor |
| 12 | Strobe/LED light mounting thread. See “LED Light Mounting Thread” on page 6. |
Table 2-5: Front Side I/O and Connectors
# 3 Getting Started
# 3.1 Mounting the Device
The NEON-1000-MDX can be mounted using the mounting screw holes on either the front (A) or back (B) sides.
Le NEON-1000-MDX peut être monté à l'aide des trous de vis de montage sur les côtés avant (A) ou arrière (B).
M4 screws, L=6mm4x vis M4, L=6mm
x M4 screws, L=6mmx vis M4, L=6mm
Figure 3-1: NEON-1000-MDX Mounting Holes
# 3.2 Digital I/O Connections
External devices such as trigger sensors, LED light controllers, or relays can be connected to the NEON-1000-MDX to implement different applications. This section shows how to connect such devices.
Figure 3-2: Digital Input Schematic Diagram
Figure 3-3: Digital Output Schematic Diagram
# 3.3 Attaching a Lens
The NEON-1000-MDX is compatible with C-mount type lenses.
Figure 3-4: Lens Attachment Assembly
NOTE:
The transfer ring is preinstalled on the NEON-1000-MDX. The washer is used only with the NEON-102B-MDX.
# 3.4 Power and Peripheral Connections
The NEON-1000-MDX can be powered from either a USB Type-C adapter or the DC jack. The USB Type-C connector also supports DisplayPort video signal and USB 3.0, which can be used to connect a keyboard and mouse. The following figures show possible power and peripheral connection configurations.
Figure 3-5: Separate Power and Peripheral Connections
NOTE:
This configuration requires an ADLINK AC/DC power adapter (P/N 31-62156-1000-A0).
Figure 3-6: Combined Power and Peripheral Connections
NOTE:
This configuration requires an ADLINK USB Type-C adapter/hub (P/N 92-99090-1010).
# 3.5 Image Capture and Inference
NOTE:
The NEON-1000-MDX does not come with software preinstalled. To get the latest software and sample code for your product, contact ADLINK support at http://askanexpert.adlinktech.com.
ADLINK provides Python sample code files for testing the built-in Basler image capturing and inference features on the NEON-1000-MDX. To get the sample code files, contact ADLINK support at http://askanexpert.adlinktech.com.
Sample Code Files
| Feature | File/Folder Name | Description |
| Single-shot image capture | imageCaptureOneShot.py | Demonstrates the Basler single-shot image capture feature |
| Continuous image capture | imageCaptureContinuous.py | Demonstrates the Basler continuous image capture feature |
| Image capture and inference | objectDetectionYolov3.py | Demonstrates the Basler continuous image capture and inferencing YOLOv3 model to perform object detection |
| model | Folder containing the pre-trained YOLOv3 model |
# 3.5.1 Image Capture Sample Code
ADLINK provides single-shot and continuous image capture sample code based on the pypylon API, the official Python API for the Basler pylon Camera Software Suite.
For more information, go to https://github.com/basler/pypylon.
When downloading the sample code files to your device, the default file path is <path>/samples/ImageCapture.
The following steps illustrate how to execute the single-shot and continuous image capture sample code.
1. Go to the directory where the image capture sample code files are saved.
2. Find the image capture sample code file you want to execute (single-shot or continuous).
3. Double-click the file to execute the sample code.
An image will display in the output window to demonstrate the selected image capture feature.
Figure 3-7: Single-Shot Image Capture
Figure 3-8: Continuous Image Capture
NOTE:
Press ESC to terminate the application.
# 3.5.2 Image Capture and Inference Sample Code
ADLINK provides an image capture and inference sample code built using the Intel® Distribution of OpenVINO™ toolkit. The sample code uses the pypylon API and inference YOLOv3 model to capture images and perform object detection, respectively.
When downloading the sample code file to your device, the default file path is <path>/samples/ImageCaptureInference.
The following steps illustrate how to execute the image capture and inference sample.
1. Go to the directory where the image capture and inference sample code is saved.
2. Right-click to open the terminal (in the current directory).
3. Enter the following command:
```txt
$ python3 ./objectDetectionYolov3.py
```
An image will display in the output window to demonstrate the image capture and inference feature.
Figure 3-9: Image Capture and Inference
NOTE:
Press ESC to terminate the application in the output window or press Ctrl+C to terminate the application in the terminal.
# 3.6 Using the Basler pylon Utility
This section describes how to use the Basler pylon utility to capture images and adjust, load, and save sensor settings.
# 3.6.1 Capturing Images with pylon
The following steps illustrate how to capture images using the Basler pylon Viewer application.
1. Click the Files icon.
2. Go to /opt/pylon/bin and double-click pylonviewer or select pylon Viewer in the launcher.
3. Double-click the sensor name to open the image sensor tab.
NOTE:
Basler daA1600-60uc is the image sensor for the NEON-102B-MDX. The sensor name that appears will reflect the model being used.
4. Click the Continuous Shot button to begin capturing images.
After clicking the Continuous Shot button, the camera begins capturing images continuously and displays activity in the image sensor tab.
# 3.6.2 Modifying Image Sensor Settings with pylon
The default NEON-1000-MDX image sensor settings may not be suitable for all applications. This section illustrates how to modify image sensor settings.
# 3.6.2.1 Loading Image Sensor Settings
# 1. Click the Files icon.
# 2. Go to /opt/pylon/bin and double-click pylonviewer or select the pylon Viewer in the launcher.
3. Double-click the sensor name to open the image sensor tab.
NOTE:
Basler daA1600-60uc is the image sensor for the NEON-102B-MDX. The sensor name that appears will reflect the model being used.
4. Click Camera > Load Features... and select the appropriate \*.pfs file to load the desired image sensor settings.
After loading the file, the image sensor settings will be updated. You can view the settings under Features in the main window.
# 3.6.2.2 Modifying Image Sensor Settings
1. Click the Files button.
2. Go to /opt/pylon/bin and double-click pylonviewer, or select pylon Viewer in the launcher.
3. Double-click the sensor name to open the image sensor tab.
NOTE:
Basler daA1600-60uc is the image sensor for the NEON-102B-MDX. The sensor name that appears will reflect the model being used.
# 4. Modify the image sensor settings as needed.
# 5. Click Camera > Save Features... from the main menu to save the modified settings to a file.
# 3.6.3 Using APIs to Modify Image Sensor Settings
After opening the device, you can add the CFeaturePersistence::Load function to load features and modify the image sensor settings.
You can find supporting documentation and additional sample code in the following directories:
• /opt/pylon/share/pylon/doc/C++
• /opt/pylon/share/pylon/samples/C++
# Important Safety Instructions
For user safety, please read and follow all instructions, Warnings, Cautions, and Notes marked in this manual and on the associated device before handling/operating the device, to avoid injury or damage.
Read these safety instructions carefully
Keep the User’s Manual for future reference
Read the Specifications section of this manual for detailed information on the recommended operating environment
Operating temperature: $\mathtt { 3 5 ^ { \circ } C }$ with USB Type-C adapter/hub or $4 0 \%$ with the adapter supply.
When installing/mounting or uninstalling/removing device; or when removal of a chassis cover is required for user servicing:
Turn off power and unplug any power cords/cables
Reinstall all chassis covers before restoring power
To avoid electrical shock and/or damage to device:
Keep device away from water or liquid sources
Keep device away from high heat or humidity
Keep device properly ventilated (do not block or cover ventilation openings)
Always use recommended voltage and power source settings
Always install and operate device near an easily accessible electrical outlet
Secure the power cord (do not place any object on/over the power cord)
Only install/attach and operate device on stable surfaces and/or recommended mountings
If the device will not be used for long periods of time, turn off and unplug from its power source
Never attempt to repair the device, which should only be serviced by qualified technical personnel using suitable tools
A Lithium-type battery may be provided for uninterrupted backup or emergency power.
Risk of explosion if battery is replaced with one of an incorrect type; please dispose of used batteries appropriately.
The device must be serviced by authorized technicians when:
The power cord or plug is damaged
Liquid has entered the device interior
The device has been exposed to high humidity and/or moisture
The device is not functioning or does not function according to the User’s Manual
The device has been dropped and/or damaged and/or shows obvious signs of breakage
Disconnect the power supply cord before loosening the thumbscrews and always fasten the thumbscrews with a screwdriver before starting the system up
It is recommended that the device be installed only in a server room or computer room where access is:
Restricted to qualified service personnel or users familiar with restrictions applied to the location, reasons therefor, and any precautions required
Only afforded by the use of a tool or lock and key, or other means of security, and controlled by the authority responsible for the location
# BURN HAZARD
Touching this surface could result in bodily injury. To reduce risk, allow the surface to cool before touching.
# Consignes de Sécurité Importante
S'il vous plaît prêter attention stricte à tous les avertissements et mises en garde figurant sur l'appareil, pour éviter des blessures ou des dommages.
Lisez attentivement ces consignes de sécurité.
Conservez le manuel de l'utilisateur pour pouvoir le consulter ultérieurement.
Lisez la section Spécifications de ce manuel pour des informations détaillées sur l'environnement d'exploitation recommandé.
Température de fonctionnement: 35 ° C avec adaptateur / concentrateur USB Type C ou 40 ° C avec l'adaptateur.
Lors de l'installation / du montage ou de la désinstallation / suppression du périphérique; ou lorsque le retrait d'un capot de châssis est requis pour l'entretien par l'utilisateur:
Coupez l'alimentation et débranchez tous les cordons / câbles d'alimentation
Réinstallez tous les couvercles de châssis avant de rétablir l'alimentation
Pour éviter les chocs électriques et / ou les dommages à l'appareil:
Gardez l'appareil éloigné de l'eau ou des sources de liquide
Gardez l'appareil loin de la chaleur ou de l'humidité élevée
Gardez l'appareil correctement ventilé (ne bloquez pas et ne couvrez pas les ouvertures de ventilation)
Utilisez toujours les paramètres de tension et de source d'alimentation recommandés
Installez et utilisez toujours l'appareil à proximité d'une prise électrique facilement accessible
Fixez le cordon d'alimentation (ne placez aucun objet sur / par-dessus le cordon d'alimentation)
Installez / fixez et utilisez l'appareil uniquement sur des surfaces stables et / ou des supports recommandés
Si l'appareil n'est pas utilisé pendant de longues périodes, éteignez-le et débranchez-le de sa source d'alimentation
N'essayez jamais de réparer l'appareil, qui ne doit être entretenu que par du personnel technique qualifié à l'aide d'outils appropriés.
Une batterie de type lithium peut être fournie pour une alimentation de secours ou une alimentation de secours ininterrompue.
Risque d’explosion si la pile est remplacée par une autre de type incorrect. Veuillez jeter les piles usagées de façon appropriée.
L'appareil doit être réparé par des techniciens autorisés lorsque:
Le cordon d'alimentation ou la fiche est endommagé
Du liquide a pénétré à l'intérieur de l'appareil
L'appareil a été exposé à une humidité élevée et / ou à l'humidité
L'appareil ne fonctionne pas ou ne fonctionne pas selon le manuel de l'utilisateur
L'appareil est tombé et / ou endommagé et / ou montre des signes évidents de casse
Débranchez le cordon d'alimentation avant de desserrer les vis moletées et fixez toujours les vis moletées avec un tournevis avant de démarrer le système Il est recommandé d'installer l'appareil uniquement dans une salle de serveurs ou une salle informatique où l'accès est:
Réservé au personnel de service qualifié ou aux utilisateurs familiers avec les restrictions appliquées à l'emplacement, les raisons de celles-ci et les précautions nécessaires
Seulement permis par l'utilisation d'un outil ou d'une serrure et d'une clé, ou d'autres moyens de sécurité, et contrôlé par l'autorité responsable de l'emplacement
# RISQUE DE BRÛLURES
Ne touchez pas cette surface, cela pourrait entraîner des blessures.
Pour éviter tout danger, laissez la surface refroidir avant de la toucher.
# Getting Service
Ask an Expert: http://askanexpert.adlinktech.com
# ADLINK Technology, Inc.
9F, No.166 Jian Yi Road, Zhonghe District
New Taipei City 235, Taiwan
Tel: +886-2-8226-5877
Fax: +886-2-8226-5717
Email: service@adlinktech.com
# Ampro ADLINK Technology, Inc.
5215 Hellyer Avenue, #110
San Jose, CA 95138, USA
Tel: +1-408-360-0200
Toll Free: +1-800-966-5200 (USA only)
+1-408-360-0222
Email: info@adlinktech.com
# ADLINK Technology (China) Co., Ltd.
300 Fang Chun Rd., Zhangjiang Hi-Tech Park
Pudong New Area, Shanghai, 201203 China
Tel: +86-21-5132-8988
Fax: +86-21-5132-3588
Email: market@adlinktech.com
# ADLINK Technology GmbH
Hans-Thoma-Strasse 11
D-68163 Mannheim, Germany
Tel: +49-621-43214-0
Fax: +49-621 43214-30
Email: emea@adlinktech.com
Please visit the Contact page at www.adlinktech.com for information on how to contact the ADLINK regional office nearest you:
[🔗 Link to the original document](.neon-1000-mdx-50-1z331-1000-10/neon-1000-mdx-50-1z331-1000-10.pdf)