# NuPRO-E43

PICMG $^{®}$ 1.3 Full Size LGA1151 Intel $^{®}$ Core $^{TM}$

i7/i5/i3 Processor-Based SHB

User's Manual

![Green printed circuit board with various electronic components and connectors (no visible text or symbols)](.nupro-e43-50m-41809-2010-21-231102/fd383ee84e1217c1f08b8aff84ab358d073ba1a5ceabf579c7044b493c208dc4.jpg)

Manual Rev.: 2.1

Revision Date: November 2, 2023

Part No: 50M-41809-2010

# Revision History

<table><tr><td>Revision</td><td>Release Date</td><td>Description of Change(s)</td></tr><tr><td>2.0</td><td>May 13, 2016</td><td>Initial release</td></tr><tr><td>2.1</td><td>November 2, 2023</td><td>Updated specs</td></tr></table>

# Preface

# Copyright 2023 ADLINK Technology, Inc.

This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

# Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

# Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.

# Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

# Conventions

Take note of the following conventions used throughout this manual to make sure that users perform certain tasks and instructions properly.

![The image shows a white document icon with a folded top-right corner and faint horizontal lines, overlaid with a large red checkmark.](.nupro-e43-50m-41809-2010-21-231102/41607d2d6b373dbfe9d21c6085db11383c54d60261cf147cce5fb59f1c726c2b.jpg)
NOTE:

Additional information, aids, and tips that help users perform tasks.

![A yellow triangular warning sign with a thick black border. Inside the triangle is a large, black exclamation point centered on the yellow background.](.nupro-e43-50m-41809-2010-21-231102/ea52ee0d027dc40a77ef77c10e703e19d3357f23223c5d340250f0d05d207b71.jpg)
CAUTION:

Information to prevent minor physical injury, component damage, data loss, and/or program corruption when trying to complete a task.

![The image displays a red triangular warning symbol with a thick black border. Centered inside the triangle is a white exclamation mark. The background surrounding the symbol is white, and a horizontal black line runs across the very top edge of the frame.](.nupro-e43-50m-41809-2010-21-231102/40b9d261b567d007f579440d5b8901bedf5176fc8d88c29c94a8d794af5d1c28.jpg)
WARNING:

Information to prevent serious physical injury, component damage, data loss, and/or program corruption when trying to complete a specific task.

# Table of Contents

# Preface .... iii

# List of Figures ...... vii

# List of Tables ix

# 1 Introduction ...... 1

1.1 Overview.... 1
1.2 Features.... 1
1.3 Specifications.... 2
1.4 Block Diagram 5
1.5 Functional Description 5
1.6 Schematics and Dimensions 8
1.7 I/O Connectivity 8
1.8 Rear Panel I/O Ports 9
1.9 Board Layout 11
1.10 Onboard Connectors 13
1.11 Jumpers & Switches 20

# 2 Getting Started 21

2.1 Package Contents 21
2.2 Installing the CPU 21
2.3 Installing the CPU Fan and Heatsink.... 25
2.4 Installing Memory Modules 25
2.5 Driver Installation 28

# A Appendix: BIOS Setup 29

A.1 Entering the BIOS.... 29
A.2 Main Menu 29
A.3 Advanced Menu.... 30
A.3.1 CPU Configuration.... 31

A.3.2 Memory Configuration 34
A.3.3 System Agent (SA) Configuration.... 35
A.3.4 Graphics Configuration 36
A.3.5 PCI Express Configuration 37
A.3.6 USB Configuration....40
A.3.7 SATA Configuration....44
A.3.8 Onboard Device Configuration 46
A.3.9 Advanced Power Management....55
A.3.10 TPM 1.2 Configuration....57
A.3.11 AMT Configuration....58
A.3.12 Intel® Bios Guard Technology....59
A.3.13 Network Stack Configuration 60
A.3.14 CSM Configuration 61
A.3.15 System Management....63
A.3.16 Miscellaneous Configuration....68

A.4 Security.... 69

A.5 Boot 70
A.6 Save & Exit 72

# B Appendix: Watchdog Timer ....75

# C Appendix: System Resources ....77

C.1 System Memory Map.... 77
C.2 I/O Map 77
C.3 Interrupt Request (IRQ) Lines.... 79

C.3.1 IRQ Lines PIC Mode....79
C.3.2 IRQ Lines APIC Mode 79
C.3.3 PCI Configuration Space Map 82
C.3.4 PCI Interrupt Routing Map 83

# Important Safety Instructions.... 85

# Getting Service 87

# List of Figures

Figure 1-1: NuPRO-E43 Block Diagram ....5
Figure 1-2: Board Dimensions ....8
Figure 1-3: Rear Panel I/O Ports....9
Figure 1-4: Board Layout 11

This page intentionally left blank.

# List of Tables

Table 1-1: NuPRO-E43 I/O Connectivity ...... 9
Table 1-2: Rear Panel I/O Legend 10
Table 1-3: Board Layout Legend 12

This page intentionally left blank.

# 1 Introduction

# 1.1 Overview

The ADLINK NuPRO-E43 is a PICMG 1.3 System Host Board (SHB) supporting the 6th Generation Intel® Core™ i7/i5/i3 and Pentium® processors in LGA1151 package to deliver a scalable high performance platform for a wide array of industrial applications. The NuPRO-E43 supports 14nm process CPUs at up to 3.7 GHz with integrated graphics and memory controllers, Direct Media Interface (DMI) and Flexible Display Interface (FDI) connectivity to the Intel® Q170 Express chipset. Dual-channel DDR4 memory is supported up to a maximum of 32GB on two DIMM slots.

These advanced features, coupled with PCI Express® x16 expansion capability, dual PCI Express®-based Gigabit Ethernet, SATA 6 Gb/s and USB 3.0 support make the NuPRO-E43 ideal for vision and automation control applications.

# 1.2 Features

▶ Supports Intel® Core™ i7/i5/i3 and Pentium® processors in LGA1151 package
▶ Integrated Intel® HD Graphics
PCI Express® x16 expansion capability via backplane
▶ Dual Gigabit Ethernet
▶ 8x USB 3.0 ports (2 on rear panel, 6 on SHB)
▶ 4x USB 2.0 ports on backplane
▶ 4x SATA 6 Gb/s ports on SHB
▶ 4x COM ports (including 2x RS232/422/485)
▶ Watchdog timer, hardware monitor
▶ Optional HD audio kit (DB-Audio2 daughter board)
▶ Expanded TPM hardware security module
▶ RoHS compliant

![The image displays an icon of a document with a folded top-left corner and faint horizontal lines representing text. A large red checkmark is superimposed over the document.](.nupro-e43-50m-41809-2010-21-231102/988874b3a4af6abf16485b2b94b88e6cef27d0827d0622ccbf73a704031b72c6.jpg)
NOTE:

To purchase the optional DB-Audio2 daughter board, please contact your ADLINK sales representative.

# 1.3 Specifications

Processor& System

<table><tr><td>CPU</td><td>Intel® CoreTM i7-6700, 3.4GHz, 8M cache, 14nm, 65W TDP, LGA1151 (4C/8T)Intel® CoreTM i7-6700TE, 2.4GHz 8M cache, 14nm, 35W TDP, LGA1151 (4C/8T)Intel® CoreTM i5-6500, 3.6GHz, 6M cache, 14nm, 65W TDP, LGA1151 (4C/4T)Intel® CoreTM i5-6500TE, 3.3GHz, 6M cache, 14nm, 35W TDP, LGA1151 (4C/4T)Intel® CoreTM i3-6100, 3.7GHz, 3M cache, 14nm, 65W TDP, LGA1151 (2C/4T)Intel® CoreTM i3-6100TE, 2.7GHz, 4M cache, 14nm, 35W TDP, LGA1151 (2C/4T)Intel® Pentium® G4400, 3.3GHz, 3M cache, 14nm, 65W TDP, LGA1151 (2C/2T)Intel® Pentium® G4400TE, 2.9GHz, 3M cache, 14nm, 35W TDP, LGA1151 (2C/2T)Intel® Celeron® G3900, 2.8GHz, 2M cache, 14nm, 65W TDP, LGA1151 (2C/2T)Intel® Celeron® G3900TE, 2.6GHz, 2M cache, 14nm, 35W TDP, LGA1151 (2C/2T)</td></tr><tr><td>Chipset</td><td>Intel® Q170 Express</td></tr><tr><td>Memory</td><td>Dual channel DDR4-2133 up to 32 GB</td></tr><tr><td>BIOS</td><td>AMI® UEFI BIOS128 Mbit SPI flash memory</td></tr><tr><td>TPM</td><td>1x box header for TPM moduleInfineon SLB 9665XT2.0</td></tr><tr><td>WDT</td><td>1-255 sec. or 1-255 min. software programmable, can generate system reset</td></tr><tr><td>Hardware Monitor</td><td>CPU temperature, system temperature, system voltage, CPU fan speed</td></tr></table>

<table><tr><td>OS</td><td>Microsoft® Windows® 7 32/64-bitMicrosoft® Windows® 10 64-bitUbuntu 15.10</td></tr></table>

I/O

<table><tr><td>Serial ATA</td><td>4x SATA 3.0 onboard with RAID support</td></tr><tr><td>Serial Ports</td><td>2x RS-232 via onboard 2.0 pitch box header2x RS-232/422/485 with auto flow control via onboard 2.0 pitch box header</td></tr><tr><td>PCIe/PCI bus (Via backplane)</td><td>1x PCIe x16 with Intel PCIe slot bifurcation support, can be configured to 1x PCIe x16 or 2x PCIe x8 or 1x PCIe x8 + 2x PCIe x4 to backplane (based on backplane), 1x PCIe x4 to backplane, and 4x PCI to backplane</td></tr><tr><td>USB</td><td>8x USB 3.0 (2 on rear I/O&amp; 6 onboard box header)4x USB 2.0 to backplane</td></tr><tr><td>LPT Port</td><td>1x LPT port via onboard box header</td></tr><tr><td>Audio</td><td>1x box header for audio module DB-Audio2</td></tr><tr><td>KB/MS</td><td>1x pin header for PS/2 keyboard&amp; mouse</td></tr></table>

Audio

<table><tr><td>Codec</td><td>Realtek® ALC262 support by DB-Audio2 daughter board</td></tr><tr><td>Interface</td><td>Intel® High Definition Audio via onboard box header</td></tr></table>

Display

<table><tr><td>Graphics</td><td>Integrated Intel® HD series, based on CPU for different GPU</td></tr><tr><td>VGA</td><td>1x VGA on rear I/O, resolution up to 1920 x 1200@60Hz</td></tr><tr><td>DVI-D</td><td>1x DVI-D via onboard pin header, resolution up to 1920 x 1200@60Hz</td></tr></table>

Ethernet

<table><tr><td>Controller</td><td>LAN1: Intel® I219LM PHY via RJ45LAN2: Intel® I225-V via RJ45</td></tr><tr><td>Interface</td><td>PCIe x1 bus</td></tr><tr><td>iAMT</td><td>Support iAMT 11</td></tr><tr><td>Wake On LAN</td><td>Support on LAN1</td></tr></table>

Manageability

<table><tr><td>SEMA</td><td>SEMA support with BMCSEMA Cloud</td></tr></table>

Mechanical and Environmental

<table><tr><td>Form Factor</td><td>Full-sized PICMG® 1.3 system host board</td></tr><tr><td>Dimensions</td><td>338 mm x 126 mm (L x W)</td></tr><tr><td>Operating Temperature</td><td>0 to 60°C</td></tr><tr><td>Storage Temperature</td><td>-40 to 80°C</td></tr><tr><td>Certification</td><td>CE &amp; FCC Class A</td></tr><tr><td>Relative Humidity</td><td>5% to 95%, non-condensing</td></tr></table>

# 1.4 Block Diagram

![This block diagram illustrates a motherboard architecture centered around a processor and a platform controller hub.\n\n**Central Components**\n*   **Dual/Quad core 14nm Skylake** (labeled with internal sub-blocks 'Graphics Controller' and 'Memory Controller')\n*   **Q170 PCH**\n\n**Connections from Dual/Quad core 14nm Skylake**\n*   Connects left to **PCIe x16 Gen 3 for Discrete Graphic or I/O** (via a PCIe slot icon and 'PCIe EXPRESS' logo).\n*   Connects right to **Rugged I/O**, which connects to **Dual Channel DDR4 2133 Max 32GB**.\n*   Connects downward via **x4 DMI** (passing through a 'PCI Express' block) to the **Q170 PCH**.\n\n**Connections from Q170 PCH**\n*   **Left Side:**\n    *   Connects to **DVI-D**.\n    *   Connects to **Analog CRT** via **x2 DisplayLink** and **DP to VGA**.\n    *   Connects to **4 USB 2.0 Ports** via **Rugged I/O**.\n    *   Connects to **4 SATA Ports at 6.0Gb/s** via **Rugged I/O** (red lines).\n*   **Right Side:**\n    *   Connects to **4 PCI** via **PCI to PCI**.\n    *   Connects to **4 PCIe x1 Lanes** via **PCIe EXPRESS**.\n    *   Connects to **8 USB 3.0 Ports** via **Rugged I/O** (passing through a **PCIe EXPRESS** block).\n    *   Connects to **Dual GbE LAN** via **Intel MAC** and **Intel MAC+PHY** (passing through a **PCIe EXPRESS** block).\n*   **Bottom Side:**\n    *   **SM Bus** connects to **SEMA**, **BIOS**, and **Audio**.\n    *   **SPI** connects to **TPM 1.2**.\n    *   **LPC** connects to **ITE Super I/O**.\n\n**Connections from ITE Super I/O**\n*   Connects to **4 COM** and **LPT**.\n*   Connects to **Pin header for KB/MS**.](.nupro-e43-50m-41809-2010-21-231102/8d1cf9c57cc0d3871ec99f0554381a79dc84254be0fc370a2a3cbc850b34132e.jpg)

Figure 1-1: NuPRO-E43 Block Diagram

# 1.5 Functional Description

# Processor Support

The NuPRO-E43 is PICMG 1.3 System Host Board supporting the 6th Generation Intel® Core™ processor family (Intel® Core™ i7/i5/i3) in LGA1151 socket. An integrated memory controller supports dual channel DDR4 and Intel® HD Graphics is integrated onboard the CPU. The CPU provides a PCI Express x16 for external graphics or expansion. Direct Media Interface (DMI) and Flexible Display Interface (FDI) provide connectivity to the Intel® Q170 Express Chipset.

# Intel $^{®}$ Q170 Express Chipset

The Intel $^{®}$ Q170 Platform Controller Hub (PCH), with the processor, provides a compact yet powerful 2-chip solution, with Direct Media Interface (DMI) chip-to-chip connection between the processor and PCH and Intel Flexible Display Interface transmitting display traffic from processor-based integrated graphics to the legacy display connectors in the PCH, including PCI Express, SATA 6 Gb/s, USB 3.0, LPC and SPI.

# Dual-Channel DDR4 Memory

To meet the requirements of memory-intensive applications, NuPRO-E43 dual-channel memory architecture supports DDR4 2133 MHz DIMMs, which delivers higher bandwidth and increased performance with lower power consumption than DDR3.

# Gigabit Ethernet

The NuPRO-E43 utilizes an Intel $^{®}$ I219LM Gigabit Ethernet PHY and Intel $^{®}$ I211-AT Gigabit Controller connected to the PCI-E bus of the Q170 PCH, with Intel $^{®}$ AMT 11 (I219LM on LAN1), Wake-on-LAN, and PXE supported.

# Serial ATA

The NuPRO-E43 provides four Serial ATA ports with data transfer rates of up to 6.0 GB/s. Intel® Rapid Storage Technology supports AHCI and RAID 0/1/5/10 functionality.

# Universal Serial Bus (USB 2.0/3.0)

The NuPRO-E43 provides 4 USB 2.0 ports (backplane) supporting transfer rates up to 480 Mb/s and 8 USB 3.0 ports (2x on rear panel, 6x on SHB) supporting transfer rates up to 5 Gb/s. All ports are USB 2.0/1.1 compatible.

# Hardware Monitoring

A built-in, proactive hardware monitoring system in the Super I/O monitors the CPU temperature, system fan speed, and voltage levels to prevent overheating and/or component damage, effect timely failure detection, and ensure stable supply of current for critical components.

# Watchdog Timer

The watchdog timer (WDT) monitors system operations based on user-defined configurations. The WDT can be programmed for different time-out periods, such as from 1 to 255 seconds or from 1 to 255 minutes. The WDT generates a reset signal, then a reset request, after failure to strobe it within the programmed time period. A register bit may be enabled to indicate if the watchdog timer caused the reset event. The WDT register is cleared during the power-on sequence to enable the operating system to take appropriate action when the watchdog generates a reboot.

# Trusted Platform Module

The NuPRO-E43 optionally supports TPM ver. 1.2 (Trusted Platform Module) for secure storage of keys, passwords and digital certificates. Systems supporting TPM offer improved hardware-based security in numerous applications, such as file and folder encryption, local password management, S-MIME e-mail, VPN and PKI authentication and wireless authentication for 802.1x and LEAP.

# Intel® Active Management Technology

Intel $^{®}$ Active Management Technology (Intel $^{®}$ AMT) is hardware-based technology for remotely managing and securing PCs out-of-band. Intel $^{®}$ AMT includes hardware-based remote management, security, power-management, and remote-configuration features. Intel $^{®}$ AMT allows remote access to a system when traditional techniques and methods are not available.

# 1.6 Schematics and Dimensions

![The image shows an icon of a white document with horizontal grey lines and a folded top-right corner. A large red checkmark is superimposed over the center of the document. There is no legible text.](.nupro-e43-50m-41809-2010-21-231102/4659d789837d403df4284b853dd7f4587dda2c46d29b97aba6f29889355bed54.jpg)
NOTE:

All dimensions shown are in mm (millimeters).

![338.1\n333.6\n151.8\n39.6\n126.4\n111\n20.6\n123.1\n126.4](.nupro-e43-50m-41809-2010-21-231102/e994498c4b3e5c45d6b9ce9986387913c15d9610347956707ea17701f6d98af1.jpg)

Figure 1-2: Board Dimensions

# 1.7 I/O Connectivity

<table><tr><td>I/O</td><td>Bracket</td><td>Onboard</td><td>Edge Connector</td><td>Remarks</td></tr><tr><td>VGA</td><td>Y</td><td>—</td><td>—</td><td>DB-15</td></tr><tr><td>DVI-D</td><td>—</td><td>Y</td><td>—</td><td>Cable w/ bracket optional</td></tr><tr><td>LAN1/2 (RJ-45)</td><td>Y</td><td>—</td><td>—</td><td>Act/Link/Speed LEDs</td></tr><tr><td>PS/2 KB/MS</td><td>—</td><td>Y</td><td>—</td><td>Cable w/ bracket optional</td></tr><tr><td>USB rear panel</td><td>2</td><td>—</td><td>—</td><td>USB 3.0</td></tr><tr><td>USB 3.0 headers</td><td>—</td><td>6</td><td>—</td><td>Cable w/ bracket optional</td></tr><tr><td>USB backplane</td><td>—</td><td>—</td><td>4</td><td>USB 2.0</td></tr><tr><td>COMA-D</td><td>—</td><td>Y</td><td>—</td><td>2.00” pitch</td></tr></table>

<table><tr><td>I/O</td><td>Bracket</td><td>Onboard</td><td>Edge Connector</td><td>Remarks</td></tr><tr><td>SATA</td><td>—</td><td>4</td><td>—</td><td>—</td></tr><tr><td>PCIe x4</td><td>—</td><td>—</td><td>Y</td><td>—</td></tr><tr><td>PCIe x16</td><td>—</td><td>—</td><td>Y</td><td>—</td></tr><tr><td>PCI 32bit/33MHz</td><td>—</td><td>—</td><td>Y</td><td>via ITE IT8892</td></tr></table>

Table 1-1: NuPRO-E43 I/O Connectivity

# 1.8 Rear Panel I/O Ports

![A\nB\nC\nD](.nupro-e43-50m-41809-2010-21-231102/db976c61fd4ded39d7c8a05a34ff2136d8cedc6eccd4201f6c69e013aa48387e.jpg)

Figure 1-3: Rear Panel I/O Ports

<table><tr><td></td><td>Connector</td><td>Description</td></tr><tr><td>A</td><td>LAN1 (RJ-45)</td><td>Gigabit Ethernet (supports Intel® AMT)</td></tr><tr><td>B</td><td>LAN2 (RJ-45)</td><td>Gigabit Ethernet</td></tr></table>

<table><tr><td></td><td>Connector</td><td>Description</td></tr><tr><td>C</td><td>VGA</td><td>DB-15 connector for CRT or LCD monitor</td></tr><tr><td>D</td><td>USB 3.0 x2</td><td>SuperSpeed USB 3.0 ports</td></tr></table>

Table 1-2: Rear Panel I/O Legend

USB 3.0 Connectors
![1\n2\n3\n4\n5\n6\n7\n8\n9](.nupro-e43-50m-41809-2010-21-231102/43166f22d0d44b2033a115ae8ea0dbc3d3ea37c1011a4032863ce820095d2f69.jpg)

<table><tr><td>Pin #</td><td>Signal Name</td></tr><tr><td>1</td><td>USB3.0_P5VA</td></tr><tr><td>2</td><td>USB2_CMAN</td></tr><tr><td>3</td><td>USB2_CMAP</td></tr><tr><td>4</td><td>GND</td></tr><tr><td>5</td><td>USB3A_CMRXN</td></tr><tr><td>6</td><td>USB3A_CMRXP</td></tr><tr><td>7</td><td>GND</td></tr><tr><td>8</td><td>USB3A_CMTXN</td></tr><tr><td>9</td><td>USB3A_CMTXP</td></tr></table>

LAN (RJ-45) Ports

![LED1\nLED2\n8\n1](.nupro-e43-50m-41809-2010-21-231102/83f6a5cfc4f4e4a1927d279af0b7e6f98571d563accaa6808ef9a08785939747.jpg)

<table><tr><td>Pin #</td><td>10BASE-T/100BASE-TX</td><td>1000BASE-T</td></tr><tr><td>1</td><td>TX+</td><td>BI_DA+</td></tr><tr><td>2</td><td>TX-</td><td>BI_DA-</td></tr><tr><td>3</td><td>RX+</td><td>BI_DB+</td></tr><tr><td>4</td><td>--</td><td>BI_DC+</td></tr><tr><td>5</td><td>--</td><td>BI_DC-</td></tr><tr><td>6</td><td>RX-</td><td>BI_DB-</td></tr><tr><td>7</td><td>--</td><td>BI_DD+</td></tr><tr><td>8</td><td>--</td><td>BI_DD-</td></tr></table>

<table><tr><td colspan="2">LED1</td><td colspan="2">LED2</td></tr><tr><td>Status</td><td>Description</td><td>Status</td><td>Description</td></tr><tr><td>Off</td><td>No Link</td><td>Off</td><td>10 Mb connection</td></tr><tr><td>On</td><td>Linked</td><td>Green</td><td>100 Mb connection</td></tr><tr><td>Blinking</td><td>Data Activity</td><td>Amber</td><td>1 Gb connection</td></tr></table>

# VGA Port

![10\n5\n15\n11\n6\n1](.nupro-e43-50m-41809-2010-21-231102/32166bf34a7ec89d9c257b5f0902917f4f9bc49e184cfcf0a8865a9b965abd4e.jpg)

<table><tr><td>Pin #</td><td>Signal</td><td>Pin #</td><td>Signal</td></tr><tr><td>1</td><td>Red</td><td>9</td><td>+5 V</td></tr><tr><td>2</td><td>Green</td><td>10</td><td>Ground</td></tr><tr><td>3</td><td>Blue</td><td>11</td><td>NC</td></tr><tr><td>4</td><td>NC</td><td>12</td><td>DDC DAT</td></tr><tr><td>5</td><td>Ground</td><td>13</td><td>HSYNC</td></tr><tr><td>6</td><td>Ground</td><td>14</td><td>VSYNC</td></tr><tr><td>7</td><td>Ground</td><td>15</td><td>DDC CLK</td></tr><tr><td>8</td><td>Ground</td><td></td><td></td></tr></table>

# 1.9 Board Layout

![A B C\nD E F G H I J K\nL M N\nP S T\nU\nR Q V W\nLGAL151](.nupro-e43-50m-41809-2010-21-231102/1cb5fe2ee39828c37b5452855cfd7cc807cec6edec26f99ca47a704ab9d21b9e.jpg)

Figure 1-4: Board Layout

<table><tr><td></td><td>Connector</td><td>Description</td></tr><tr><td>A</td><td>CN40</td><td>DIMM B0</td></tr><tr><td>B</td><td>CN39</td><td>DIMM A0</td></tr><tr><td>C</td><td>CN36</td><td>Power 4-pin (ATX 12V)</td></tr><tr><td>D</td><td>FAN1</td><td>Fan1(CPU fan)</td></tr><tr><td>E</td><td>CN35</td><td>USER (system panel pin header)</td></tr><tr><td>F</td><td>CN34</td><td>DVI (DVI-D)</td></tr><tr><td rowspan="4">G(Top down)</td><td>CN30</td><td>SATA #0</td></tr><tr><td>CN31</td><td>SATA #1</td></tr><tr><td>CN32</td><td>SATA #2</td></tr><tr><td>CN33</td><td>SATA #3</td></tr><tr><td>H</td><td>CN26</td><td>USB3.0 #3/4</td></tr><tr><td>I</td><td>CN27</td><td>USB3.0 #5/6</td></tr><tr><td>J</td><td>CN28</td><td>USB3.0 #7/8</td></tr><tr><td>K</td><td>CN22</td><td>LPT</td></tr><tr><td>L</td><td>CN9</td><td>COM C</td></tr><tr><td>M</td><td>CN10</td><td>COM D</td></tr><tr><td>N</td><td>CN8</td><td>COM A</td></tr><tr><td>O</td><td>CN7</td><td>COM B</td></tr><tr><td>P</td><td>CN17</td><td>TPM</td></tr><tr><td>Q</td><td>CN5</td><td>Audio</td></tr><tr><td>R</td><td>CN20</td><td>DB40</td></tr><tr><td colspan="3">Rear Side Mounted</td></tr><tr><td>S</td><td>CN24</td><td>USB3.0#1</td></tr><tr><td>T</td><td>CN25</td><td>USB3.0#2</td></tr><tr><td>U</td><td>CN1</td><td>D-SUB</td></tr><tr><td>V</td><td>CN4</td><td>I211 LAN</td></tr><tr><td>W</td><td>CN3</td><td>I219 LAN</td></tr></table>

Table 1-3: Board Layout Legend

# 1.10 Onboard Connectors

COMA to D Connector (RS-232) (CN7/8/9/10)
![Pin #	RS-232 Signal\n1	DCD\n2	DSR\n3	RXD\n4	RTS\n5	TXD\n6	CTS\n7	DTR\n8	RI\n9	GND\n10	NC](.nupro-e43-50m-41809-2010-21-231102/33a4a5a96c9828e81d708eda20c66a57d92e4bc03c35cf770891a6aad5d33b4c.jpg)

<table><tr><td></td><td>COMA (COM2)</td><td>COMB (COM1)</td><td>COMC (COM3)</td><td>COMD (COM4)</td></tr><tr><td>Connector</td><td>CN8</td><td>CN7</td><td>CN9</td><td>CN10</td></tr><tr><td>Pitch</td><td>2.00 mm</td><td>2.00 mm</td><td>2.00 mm</td><td>2.00 mm</td></tr></table>

COMA to B Connector (RS-422/485) (CN7/8)
![Pin #	RS-422	RS-485\n1	TXD-	Data-\n2	NC	NC\n3	TXD+	Data+\n4	NC	NC\n5	RXD+	NC\n6	NC	NC\n7	RXD-	NC\n8	NC	NC\n9	GND	GND\n10	NC	NC](.nupro-e43-50m-41809-2010-21-231102/3ce43e6f2d31493183e45d6f782d8cf9997fe46e385c525509df237f4ccdd6bf.jpg)

# USB 3.0 Connectors (CN26/27/28)

![Pure diagram of a rectangular structure with numbered corners (1 and 20), no text or symbols present.](.nupro-e43-50m-41809-2010-21-231102/91caa92bf57686dc56bb2ff3c6a776b5495ee324e5a65b954d4f0e35e308cd0e.jpg)

<table><tr><td>Pin #</td><td>Signal</td><td>Pin #</td><td>Signal</td></tr><tr><td>1</td><td>P5V_USB3B</td><td>20</td><td>NC</td></tr><tr><td>2</td><td>S_USB3_RN3_R</td><td>19</td><td>P5V_USB3B</td></tr><tr><td>3</td><td>S_USB3_RP3_R</td><td>18</td><td>S_USB3_RN4_R</td></tr><tr><td>4</td><td>GND</td><td>17</td><td>S_USB3_RP4_R</td></tr><tr><td>5</td><td>S_USB3_TN3_R</td><td>16</td><td>GND</td></tr><tr><td>6</td><td>S_USB3_TP3_R</td><td>15</td><td>S_USB3_TN4_R</td></tr><tr><td>7</td><td>GND</td><td>14</td><td>S_USB3_TP4_R</td></tr><tr><td>8</td><td>S_USB2_N2_R</td><td>13</td><td>GND</td></tr><tr><td>9</td><td>S_USB2_P2_R</td><td>12</td><td>S_USB2_N3_R</td></tr><tr><td>10</td><td>S_USB_OC1#</td><td>11</td><td>S_USB2_P3_R</td></tr></table>

# DVI-D Onboard Connector(CN34)

<table><tr><td></td><td>Pin #</td><td>Signal</td></tr><tr><td rowspan="20">&lt;img src="images/a6b35c1601d2e20bbb2143aab9794c593589e907bf3684fbd06dfefcea295ceb.jpg"/&gt;</td><td>1</td><td>GND</td></tr><tr><td>2</td><td>GND</td></tr><tr><td>3</td><td>TMD_CKP</td></tr><tr><td>4</td><td>TMD_N2</td></tr><tr><td>5</td><td>TMD_CKN</td></tr><tr><td>6</td><td>TMD_P2</td></tr><tr><td>7</td><td>GND</td></tr><tr><td>8</td><td>GND</td></tr><tr><td>9</td><td>TMD_SCL</td></tr><tr><td>10</td><td>TMD_N1</td></tr><tr><td>11</td><td>TMD_SDA</td></tr><tr><td>12</td><td>TMD_P1</td></tr><tr><td>13</td><td>GND</td></tr><tr><td>14</td><td>GND</td></tr><tr><td>15</td><td>TMD_HPD</td></tr><tr><td>16</td><td>TMD_N0</td></tr><tr><td>17</td><td>+5V_PSU_DVI</td></tr><tr><td>18</td><td>TMD_P0</td></tr><tr><td>19</td><td>GND</td></tr><tr><td>20</td><td>GND</td></tr></table>

# DVI-D Bracket Connector

(optional cable w/ bracket, P/N 30-01052-2000)

![Front view of a 24-pin D-sub connector (no text or symbols visible)](.nupro-e43-50m-41809-2010-21-231102/ed71131271e619294e1f07734fd43f2b42a04f62f692ab94ca4e84f726af2a6f.jpg)

<table><tr><td>Pin #</td><td>Signal</td><td>Pin #</td><td>Signal</td></tr><tr><td>1</td><td>TMDS Data2-</td><td>13</td><td>TMDS Data3+</td></tr><tr><td>2</td><td>TMDS Data2+</td><td>14</td><td>+5 V Power</td></tr><tr><td>3</td><td>TMDS Data2/4 Shield</td><td>15</td><td>GND</td></tr><tr><td>4</td><td>TMDS Data4-</td><td>16</td><td>Hot Plug Detect</td></tr><tr><td>5</td><td>TMDS Data4+</td><td>17</td><td>TMDS Data0-</td></tr><tr><td>6</td><td>DDC Clock [SCL]</td><td>18</td><td>TMDSData0+</td></tr><tr><td>7</td><td>DDC Data [SDA]</td><td>19</td><td>TMDS Data0/5 Shield</td></tr><tr><td>8</td><td>Analog vertical sync</td><td>20</td><td>TMDS Data5-</td></tr><tr><td>9</td><td>TMDS Data1-</td><td>21</td><td>TMDS Data5+</td></tr><tr><td>10</td><td>TMDS Data1+</td><td>22</td><td>TMDS Clock Shield</td></tr><tr><td>11</td><td>TMDS Data1/3 Shield</td><td>23</td><td>TMDS Clock +</td></tr><tr><td>12</td><td>TMDS Data3-</td><td>24</td><td>TMDS Clock -</td></tr></table>

# ATX 12V Power Connector (CN36)

![2\n1\n4\n3](.nupro-e43-50m-41809-2010-21-231102/a2e7908189c2a7d81e786e552095585bc231efd30725b71fd40b95408f25a8f0.jpg)

<table><tr><td>Pin #</td><td>Signal</td></tr><tr><td>1</td><td>GND</td></tr><tr><td>2</td><td>GND</td></tr><tr><td>3</td><td>+12V DC</td></tr><tr><td>4</td><td>+12V DC</td></tr></table>

# PS/2 Keyboard/Mouse Pin Header (CN37)

<table><tr><td></td><td>Pin #</td><td>Signal</td></tr><tr><td rowspan="6">&lt;img src="images/aab303f20c086bc0d6796994ef8608707ededdf396dfd32dc6908bb67a963228.jpg"/&gt;</td><td>1</td><td>KBCLK_R</td></tr><tr><td>2</td><td>KBDATA_R</td></tr><tr><td>3</td><td>MSCLK_R</td></tr><tr><td>4</td><td>MSDATA_R</td></tr><tr><td>5</td><td>GND</td></tr><tr><td>6</td><td>KM_VCC</td></tr></table>

# Serial SATA Connectors (CN30\~33)HD Audio Daughter

![1\n7](.nupro-e43-50m-41809-2010-21-231102/97b1ee716667892c364be27150ce3f71c9ffcc4e3d3815dc1f4555e805be3c63.jpg)

<table><tr><td>Pin #</td><td>Signal</td></tr><tr><td>1</td><td>GND</td></tr><tr><td>2</td><td>TXP</td></tr><tr><td>3</td><td>TXN</td></tr><tr><td>4</td><td>GND</td></tr><tr><td>5</td><td>RXN</td></tr><tr><td>6</td><td>RXP</td></tr><tr><td>7</td><td>GND</td></tr></table>

# Board Connector (CN5)

This connector is designed for use with the ADLINK DB-Audio2 daughter board.

![1\n2\n9\n10](.nupro-e43-50m-41809-2010-21-231102/85fae0cf3955273bae69ca673ee6fe9477330f8d41deb87b02b763a3e80bae6a.jpg)

<table><tr><td>Pin #</td><td>Signal</td><td>Function</td></tr><tr><td>1</td><td>GND</td><td>Ground</td></tr><tr><td>2</td><td>AUD_BCLK</td><td>Audio Clock</td></tr><tr><td>3</td><td>GND</td><td>Ground</td></tr><tr><td>4</td><td>ICH_AUD_SDIN1</td><td>Audio Data Input</td></tr><tr><td>5</td><td>P5V</td><td>+ 5V</td></tr><tr><td>6</td><td>ICH_AUD_SDOUT</td><td>Audio Data Output</td></tr><tr><td>7</td><td>P5V_AUD</td><td>+ 5V</td></tr><tr><td>8</td><td>P3V3_DVDD</td><td>3.3V</td></tr><tr><td>9</td><td>AUD_SYNC</td><td>Audio Synchronous</td></tr><tr><td>10</td><td>AUD_RSTJ</td><td>Audio Reset</td></tr></table>

# System Panel Connector (CN35)

Connects to chassis-mounted buttons, speakers, and LEDs.

![2\n1\n20\n19](.nupro-e43-50m-41809-2010-21-231102/4d56d805aae743623ebe5dca4739e9f300333b03502bdcba140d6638ec183e45.jpg)

<table><tr><td>Pin #</td><td>Signal</td></tr><tr><td>1</td><td>GND</td></tr><tr><td>2</td><td>SPKR</td></tr><tr><td>3</td><td>RSTBTN</td></tr><tr><td>4</td><td>NC</td></tr><tr><td>5</td><td>NC</td></tr><tr><td>6</td><td>NC</td></tr><tr><td>7</td><td>GND</td></tr><tr><td>8</td><td>+5V_PSU</td></tr><tr><td>9</td><td>PWRBTN</td></tr><tr><td>10</td><td>NC</td></tr><tr><td>11</td><td>NC</td></tr><tr><td>12</td><td>GND</td></tr><tr><td>13</td><td>NC</td></tr><tr><td>14</td><td>KEYLOCK</td></tr><tr><td>15</td><td>HLED</td></tr><tr><td>16</td><td>PLED</td></tr><tr><td>17</td><td>HLED_POWER</td></tr><tr><td>18</td><td>NC</td></tr><tr><td>19</td><td>NC</td></tr><tr><td>20</td><td>+5V_PSU</td></tr></table>

# Fan Connector (FAN1)

4

![The image shows a line drawing of a rectangular battery. At the top, there are two small rectangular terminals. Inside the battery body, below the terminals, are two small vertical lines. The lower section contains four small squares arranged in a row, each with an 'x' inside. To the right of the battery is the number 1.](.nupro-e43-50m-41809-2010-21-231102/125bd41d084f564861fb1c798aa10a1d4e92defeffbde7f70029b3ed6dd6591b.jpg)

<table><tr><td>Pin #</td><td>Signal</td></tr><tr><td>1</td><td>GND</td></tr><tr><td>2</td><td>Fan power (+12V)</td></tr><tr><td>3</td><td>Fan Tachometer</td></tr><tr><td>4</td><td>Fan Speed Control</td></tr></table>

# 1.11 Jumpers & Switches

# Clear CMOS Jumper (CN41)

To clear the BIOS settings (RTC RST#):

1. Power down and disconnect power from the system.
2. Short pins 2-3 on CN41.
3. Reconnect power and power up the system.
4. Wait 3 seconds or more.
5. Power down and disconnect power from the system.
6. Re-short pins 1-2, and power up the system..

<table><tr><td>CMOS Status</td><td>Connection</td><td>CN41</td></tr><tr><td>Normal</td><td>1 – 2</td><td>&lt;img src="images/1f60d309a8b800acc01a89cc8ff71d4d2f0dc2b8f684a92db79adf7dd118dc36.jpg"/&gt;</td></tr><tr><td>Clear CMOS</td><td>2 – 3</td><td>&lt;img src="images/c1f75b82fa7f81c3d743d587260b40fb9cfb809cbc87ed106acc912728f23776.jpg"/&gt;</td></tr></table>

# Clear RTC Jumper (CN42)

To clear the BIOS settings and data/time (SRTCRST#):

1. Power down and disconnect power from the system.
2. Short pins 2-3 on CN42.
3. Reconnect power and power up the system.

After power up, remove the jumper cap from pins 2-3 and reinstall it to pins 1-2.

<table><tr><td>CMOS Status</td><td>Connection</td><td>CN42</td></tr><tr><td>Normal</td><td>1 – 2</td><td>&lt;img src="images/adf839d3248018831a8ce8e180eaab6b550a49550c74fce43d23470a9b14a038.jpg"/&gt;</td></tr><tr><td>Clear CMOS</td><td>2 – 3</td><td>&lt;img src="images/c3ec37695e90321b0c9b28959e0f8e0c149b677a1e9dbfd185df7725c42c3cfc.jpg"/&gt;</td></tr></table>

To clear CMOS, clear both CMOS and RTC jumpers at the same time.

This page intentionally left blank.

# 2 Getting Started

# 2.1 Package Contents

Before unpacking, check the shipping carton for any damage. If the shipping carton and/or contents are damaged, inform your dealer immediately. Retain the shipping carton and packing materials for inspection. Obtain authorization from the dealer before returning any product to ADLINK.

▶ NuPRO-E43
▶ SATA data cable with latch (x2)
▶ 2-port USB 3.0 cable with bracket (2.0 mm pitch)
▶ 2-port COM cable with bracket (2.0 mm pitch)
▶ Printer port cable with bracket (2.0 mm pitch)

![The image displays a standard safety warning symbol consisting of a red triangle with a white exclamation mark in the center. Below the triangle, the text 'WARNING:' appears in black capital letters.](.nupro-e43-50m-41809-2010-21-231102/f93108c217efecd14de2c414111eb6440f4f5979f4727f221bfa9deb49adec80.jpg)

The NuPRO-E43 must be protected from static discharge and physical shock. Never remove any of the socketed parts except at a static-free workstation. Use the anti-static bag shipped with the product to handle the board. Wear a grounded wrist strap when installing and/or servicing.

# 2.2 Installing the CPU

The NuPRO-E43 supports an Intel® Core™ i7/i5/i3 or Pentium® processor in an LGA1151 socket.

![The image displays a warning sign featuring a red triangle with a white border containing a black exclamation point. Below the triangle is a black rectangular bar containing the word 'WARNING' in white capital letters.](.nupro-e43-50m-41809-2010-21-231102/ce545021dafc7650cba038c16c23d65c93a7daaa0d14f395e793d221720a3b49.jpg)

▶ Disconnect all power to the board before installing a CPU to prevent damaging the board and CPU.
▶ Do not touch socket contacts. Damaging the contacts voids the product warranty. Follow the installation instructions carefully to avoid damaging the board components.

# To install the CPU:

1. Press down on the locking arm (A), then push it away from the socket to disengage it from the retention tab (B).

![Close-up of a green circuit board with a black plastic component and red arrows pointing to features (no text or symbols visible)](.nupro-e43-50m-41809-2010-21-231102/78e1572dc5e8dadaaea0d57e6878c0c19b5a511abd26fc326dbc97b008508256.jpg)

2. Raise the locking arm to unlock the load plate.

![Close-up of a green printed circuit board with visible components and red annotations (no readable text or symbols)](.nupro-e43-50m-41809-2010-21-231102/4028b1311801d7e39a0b8a35ed04ea20ab96f02763e03d0b959a63e96cb8e473.jpg)

3. Lift the load plate to uncover the socket.

![Close-up of a green printed circuit board with visible components and red arrows indicating assembly or connection (no text or symbols)](.nupro-e43-50m-41809-2010-21-231102/6e9a1e128bff4bbbff8ac9489410a3b46d76f9715055ad2e5e60978e5eb2c500.jpg)

4. Remove the plastic protective cover from the socket. Note the locations of the alignment keys (A) and Pin 1 indicator (B).

![B\nA](.nupro-e43-50m-41809-2010-21-231102/1a5b32dceb83e166fdcd730cb011975c4a86e0329a44cd5460aa5166c0e6234c.jpg)

![The image displays a standard warning sign consisting of a dark red triangle containing a white exclamation point, with the word 'WARNING' in black capital letters beneath it.](.nupro-e43-50m-41809-2010-21-231102/86b7b3863cf4387706fe8d43750c2027c71ddea2901e1aec85d7d7972e2f859b.jpg)
Do NOT touch socket contacts.

5. Hold the CPU using thumb and forefinger as shown. Position the CPU over the socket, matching the notches on the sides of the CPU with the alignment keys on the socket (A). The golden triangle on the CPU must be positioned at the corner of the socket with the Pin 1 indicator as shown (B).

![Close-up of a hand pressing a microchip on a green circuit board (no text or symbols visible)](.nupro-e43-50m-41809-2010-21-231102/73655afb6173164e0f2143844b0c7089dc3e67b17a8dd8c51e63a197d83ed26e.jpg)

![The image displays a standard warning sign consisting of a red triangle with a white border. Inside the triangle is a large white exclamation point. Below the triangle is the text 'WARNING:' printed in black capital letters.](.nupro-e43-50m-41809-2010-21-231102/8615cf2f59ece58d1a456217ffca8ac2f0da1eb24ef272244abe702c9ef3f54e.jpg)
The CPU fits into the socket in only one orientation. DO NOT force it into the socket to avoid causing damage.

Carefully place the CPU into the socket vertically. The socket has cutouts for your fingers to fit into.

![Close-up of a green circuit board with an internal processor chip and red arrows pointing to its components (no text or symbols visible)](.nupro-e43-50m-41809-2010-21-231102/cd73a6fb6dc00fa1a4a13ee620683f86f69c5c9a062270a2125e537b430824ca.jpg)

Cutouts

6. Gently lower the load plate. Make sure the front edge of the plate is under the screw as indicated.

![Close-up of a green circuit board with a central processor and visible traces, no text or symbols present.](.nupro-e43-50m-41809-2010-21-231102/5da4ec43bf4010392898cd6c249b7a7cdfda1d8cb59cbca09ced3ca59ab1e475.jpg)

7. Lower the locking arm and fasten it to the retention tab (A). The load plate should be locked underneath the screw as shown (B).

![Close-up of a green printed circuit board with visible CPU socket and metal components (no text or symbols)](.nupro-e43-50m-41809-2010-21-231102/599c004438ad399f3b147ac10f01eab97701b46004a87512688e3ce146d2c029.jpg)

# 2.3 Installing the CPU Fan and Heatsink

![This image displays a standard warning symbol. It features a red equilateral triangle containing a white exclamation point and a small white circle at the bottom. Directly beneath the triangle, the text 'WARNING:' is written in bold, black capital letters.](.nupro-e43-50m-41809-2010-21-231102/4a7995048a2c3287318bc6665bab423a73083ccece4e207e6845c82f7b5487d2.jpg)

The CPU requires a chassis with an airflow inlet and maximum internal ambient temperature of $50^{\circ}$ C. A especially-designed CPU fan and heatsink must be installed before using the SHB. Failure to install a CPU fan and heatsink may damage the system host board and/or the CPU..

If CPU fan installation procedures presented here are inconsistent with the installation procedures you obtained from the CPU fan and heatsink package, follow the latter.

To install the CPU fan:

1. Apply thermal grease evenly on top of the installed CPU.
2. Lower the CPU fan to the CPU, then secure it using the provided attachments or screws.
3. Connect the CPU fan cable to the CPU fan connector on the SHB labeled FAN1.

# 2.4 Installing Memory Modules

The NuPRO-E43 supports up to 32 GB of DDR4 2133 MHz memory on two DIMM sockets. DDR4 modules have a 288-pin footprint compared to DDR3's 240-pin DIMM.

![The image displays a standard warning sign featuring a red inverted triangle with a white border and a white exclamation point in the center. Below the triangle, the word 'WARNING:' is printed in black, capital letters.](.nupro-e43-50m-41809-2010-21-231102/0bfcf662c2b53c442358ee7402f59b40d96f0df00b32b355a4016b162ebc49af.jpg)

Disconnect all power to the board before installing a memory module to prevent damaging the board and memory module.

# Memory Configuration Options

4GB, 8GB, and 16GB unbuffered non-ECC DDR4 DIMM are supported in the following configurations.

▶ Channel A: DIMMA0

Channel B: DIMMB0

For dual-channel configuration, the total size of memory module installed per channel must be the same (DIMMA0 = DIMMB0).
It is recommended that you install DIMMs with the same CAS latency. For maximum compatibility, install memory modules with the same brand, model, and/or rating.

To install a memory module:

1. Locate the DIMM sockets on the motherboard.
2. Press the socket's retaining clips outward to unlock.

![Mechanical component with black frame and red directional arrows indicating motion (no text or symbols)](.nupro-e43-50m-41809-2010-21-231102/70193be32fdb3265edce3ac452d93579925090c0409960125a2be52c51bf800f.jpg)

3. Align the memory module on the socket making sure that the notch matches the break on the socket.

![Notch\n512 Mb\nBreak](.nupro-e43-50m-41809-2010-21-231102/475dca01209448201bc95fcd5fab4585629b6b9e0539730c5db1fe485a361067.jpg)

4. Insert the module firmly into the slot until the retaining clips snap back inwards and the module is securely seated.

![05M14000.832-5AL\n0601.1.1.0.2000/1938\nLHINTU/RATR/NLS\n512 MB](.nupro-e43-50m-41809-2010-21-231102/e4d09e4a0f90111d2350611bc250a9c4d69e88097ec90ed5e621f2e82a7226c0.jpg)

# 2.5 Driver Installation

Download requisite drivers, as follows, for your system from http://www.adlinktech.com and install.

▶ Chipset
▶ Display
▶ Ethernet
▶ Rapid Storage
▶ USB 3.0
▶ Management Engine

![The image shows a warning sign consisting of a red triangle with a black border containing a black exclamation point in the center. Below the triangle is the word 'WARNING' printed in black, capital letters.](.nupro-e43-50m-41809-2010-21-231102/1e22ebb0ba000ba446d663f33decb6e644cec2f029831c939294adfbaf9f0972.jpg)

In order to enable RAID or AHCI mode, you must pre-install the Intel® Rapid Storage Technology driver during the Windows\* installation process. using the F6 installation method.
\*Not required for Windows Vista and Windows 7.

# Appendix A BIOS Setup

The following chapter describes basic navigation for the AMIBIOS $^{®}$ EFI BIOS setup utility.

# A.1 Entering the BIOS

To enter the setup screen, follow these steps:

1. Power on the motherboard
2. Press &lt; Delete &gt; when the prompt appears:

# A.2 Main Menu

When UEFI Setup is started, the Main menu appears, displaying the system overview.

![Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.\nMain Advanced Security Boot Save & Exit\nBIOS Information\nBIOS Vendor American Megatrends\nCore Version 5.11\nBIOS Version NuPRO-E43 1.00.10\nBoard Version A02\nPlatform Information\nProcessor Name SkyLake DT\nProcessor Stepping R0/S0/N0\nPCH Name SKL PCH-H\nPCH SKU PCH-H Desktop Q170 SKU\nPCH Stepping 31/D1\nGT Info GT2 (1000 MHz)\nSBC Information\nPCIe Port A: 1x8 + 2x4\nPCIe Port B: 1x4\nF/W Information\nMRC Version 1.8.0.1\nMicrocode Version 6A\nVBIOS Version 1033\nME FW Version 11.0.0.1194\nSystem Language (English)\nChoose the system default\nlanguage\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit\nVersion 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.](.nupro-e43-50m-41809-2010-21-231102/74da9aeacf2ac946ab07e9abd17b114b6426edf9bc7f0f1e8ced35f37658a4af.jpg)

Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc. ed Security Boot Save & Exit

<table><tr><td colspan="2">Platform Information</td></tr><tr><td>Processor Name</td><td>SkyLaKe DT</td></tr><tr><td>Processor Stepping</td><td>RO/SO/N0</td></tr><tr><td>PCH Name</td><td>SKL PCH-H</td></tr><tr><td>PCH SKU</td><td>PCH-H Desktop Q170 SKU</td></tr><tr><td>PCH Stepping</td><td>31/D1</td></tr><tr><td>GT Info</td><td>GT2 (1000 MHz)</td></tr><tr><td colspan="2">SBC Information</td></tr><tr><td>PCIe Port A:</td><td>1x8 + 2x4</td></tr><tr><td>PCIe Port B:</td><td>1x4</td></tr><tr><td colspan="2">F/W Information</td></tr><tr><td>MRC Version</td><td>1.8.0.1</td></tr><tr><td>Microcode Version</td><td>6A</td></tr><tr><td>VBIOS Version</td><td>1033</td></tr><tr><td>ME FW Version</td><td>11.0.0.1194</td></tr><tr><td>System Language</td><td>[English]</td></tr><tr><td>System Date</td><td>[Tue 04/29/2127]</td></tr><tr><td>System Time</td><td>[05:40:18]</td></tr><tr><td>Access Level</td><td>Administrator</td></tr></table>

Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.

# System Language

Selects the default system language.

# System Date

Sets the date. Use Tab to switch between date elements.

# System Time

Sets the time. Use Tab to switch between time elements.

# A.3 Advanced Menu

Accesses CPU Configuration, Memory Configuration, System Agent (SA) Configuration, Graphics Configuration, PCI Express Configuration, USB Configuration, SATA Configuration, Onboard Device Configuration, Advance Power Management, TPM 1.2 Configuration, AMT Configuration, Intel® Bios Guard Technology,

# Network Stack Configuration, CSM Configuration, System Management, Miscellaneous Configuration.

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.</td></tr><tr><td colspan="2">Main Advanced Security Boot Save &amp; Exit</td></tr><tr><td>CPU Configuration
Memory Configuration
System Agent (SA) Configuration
Graphics Configuration
PCI Express Configuration
USB Configuration
SATA Configuration
Onboard Devices Configuration
Advanced Power Management
TPM 1.2 Configuration
AMT Configuration
Intel(R) Bios Guard Technology
Network Stack Configuration
CSM Configuration
System Management
Miscellaneous Configuration</td><td>CPU Configuration Parameters</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.</td></tr></table>

# A.3.1 CPU Configuration

![Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.\nAdvanced\nCPU Configuration\nIntel(R) Core(TM) i3-6100 CPU @ 3.70GHz\nCPU Signature 506E3\nMicrocode Version 6A\nMax CPU Speed 3700 MHz\nMin CPU Speed 800 MHz\nCPU Speed 3700 MHz\nProcessor Cores 2\nHyper Threading Technology Supported\nIntel VT-x Technology Supported\nIntel SMX Technology Not Supported\n64-bit Supported\nEIST Technology Supported\nCPU C3 state Supported\nCPU C6 state Supported\nCPU C7 state Supported\nL1 Data Cache 32 kB x 2\nL1 Code Cache 32 kB x 2\nL2 Cache 256 kB x 2\nL3 Cache 3 MB\nL4 Cache Not Present\nHyper-threading (Enabled)\nEnabled for Windows XP and Linux (OS optimized for Hyper-Threading Technology) and Disabled for other OS (OS not optimized for Hyper-Threading Technology). When Disabled only one thread per enabled core is enabled.\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit\nVersion 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.](.nupro-e43-50m-41809-2010-21-231102/0bb57da95b1ad0f3e38ae2f4ccfca4ce9b9ab9639a28fd9a5779008516abf622.jpg)

Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Advanced

<table><tr><td>Intel SMX Technology</td><td>Not Supported</td><td rowspan="11">Enable/Disable ACPI 3.0T-States.</td></tr><tr><td>64-bit</td><td>Supported</td></tr><tr><td>EIST Technology</td><td>Supported</td></tr><tr><td>CPU C3 state</td><td>Supported</td></tr><tr><td>CPU C6 state</td><td>Supported</td></tr><tr><td>CPU C7 state</td><td>Supported</td></tr><tr><td>L1 Data Cache</td><td>32 kB x 2</td></tr><tr><td>L1 Code Cache</td><td>32 kB x 2</td></tr><tr><td>L2 Cache</td><td>256 kB x 2</td></tr><tr><td>L3 Cache</td><td>3 MB</td></tr><tr><td>L4 Cache</td><td>Not Present</td></tr><tr><td>Hyper-threading</td><td>[Enabled]</td><td>++: Select Screen</td></tr><tr><td>Active Processor Cores</td><td>[All]</td><td>↑↓: Select Item</td></tr><tr><td>Intel Virtualization Technology</td><td>[Enabled]</td><td>Enter: Select</td></tr><tr><td>CPU AES</td><td>[Enabled]</td><td>+/-: Change Opt.</td></tr><tr><td>Intel(R) Speed Shift Technology</td><td>[Enabled]</td><td>F1: General Help</td></tr><tr><td>Intel(R) SpeedStep(tm)</td><td>[Enabled]</td><td>F2: Previous Values</td></tr><tr><td>CPU C states</td><td>[Enabled]</td><td>F3: Optimized Defaults</td></tr><tr><td>CState Pre-Wake</td><td>[Enabled]</td><td>F4: Save &amp; Exit</td></tr><tr><td>Package C State limit</td><td>[AUTO]</td><td>ESC: Exit</td></tr><tr><td>CPU DTS</td><td>[Disabled]</td><td></td></tr><tr><td>TCC Activation Offset</td><td>0</td><td></td></tr><tr><td>ACPI 3.0 T-States</td><td>[Disabled]</td><td></td></tr></table>

Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.

# Hyper-threading

(Appears if CPU supports Hyper Threading)

Enabled for Windows and Linux (OS optimized for Hyper-Threading Technology) and Disabled for other OS (OS not optimized for Hyper-Threading Technology). When Disabled only one thread per enabled core is enabled.

# Active Processor Cores

Number of cores to be enabled in each processor package.

# Intel Virtualization Technology

When enabled, VMM can utilize the additional hardware capabilities provided by Vanderpool Technology.

# CPU AES

Enables/disables CPU Advanced Encryption Standard instructions

# Intel® Speed Shift Technology

Enables/disables Intel $^{®}$ Speed Shift Technology support. Enabling displays the CPPC v2 interface to allow hardware controlled P-states.

# Intel® SpeedStep™

Allows more than two frequency ranges to be supported.

# Turbo Mode

Enables/disables Turbo Mode.

# CPU C states

Enables/disables CPU C states

# CState Pre-Wake

Disable sets bit 30 of POWER\_CTL MSR(0x1FC) to 1 to disable the Cstate Pre-Wake.

# Package C State limit

Package C State limit

# CPU DTS

Disabled: ACPI thermal management uses EC reported temperature values.

Enabled: ACPI thermal management uses DTS SMM mechanism to obtain CPU temperature values.

Out of Spec: ACPI Thermal Management uses EC reported temperature values and DTS SMM is used to handle Out of Spec condition.

# TCC Activation Offset

Offset from the factory TCC activation temperature.

# ACPI 3.0 T-States

Enables/disables ACPI 3.0 T-States.

# Intel TXT(LT) Support

Enables or Disables Intel® TXT(LT) support.

# A.3.2 Memory Configuration

# Memory Remap

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc. Advanced</td></tr><tr><td rowspan="2">Memory Configuration Memory Frequency 2133 MHz Total Memory 4096 MB VDD 1200 mVolts DIMM#1 Not Present DIMM#2 4096 MB Memory Timings (tCL-tRCD-tRP-tRAS) 15-15-15-36 Memory Remap [Enabled]</td><td>Enable/Disable Memory Remap above 4GB</td></tr><tr><td>+: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.</td></tr></table>

Enables/disables Memory Remap above 4GB.

# A.3.3 System Agent (SA) Configuration

![Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.\nAdvanced\nSystem Agent (SA) Configuration\nSystem Agent Bridge Name Skylake\nSA PCIe Code Version 1.8.0.0\nVT-d Supported\nVT-d (Enabled)\nAbove 4GB MMIO BIOS assignment (Disabled)\nVT-d capability\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit\nVersion 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.](.nupro-e43-50m-41809-2010-21-231102/a86487d782a4c43f3e45f9ef6f50754231e39735c17c1224e43ab9e2d4ea18b9.jpg)

# VT-d

Enables VT-d capability

# Above 4GB MMIO BIOS assignment

Enables/disables Memory MappedIO BIOS assignment over 4GB, disabled automatically when Aperture Size is set to 2048MB.

# A.3.4 Graphics Configuration

<table><tr><td>Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc. Advanced</td><td></td></tr><tr><td rowspan="2">Graphics Configuration Primary Display [Auto] Internal Graphics [Auto] GTT Size [8MB] Aperture Size [256MB] DVMT Pre-Allocated [32M] DVMT Total Gfx Mem [256M]</td><td>Select which of IGFX/PEG/PCIE Graphics device should be Primary Display.</td></tr><tr><td>+: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.</td></tr></table>

# Primary Display

Sets the Primary Display from among IGFX/PEG/PCIE.

# Internal Graphics

Keeps IGFX enabled based on the setup options.

# GTT Size

Sets GTT size.

# Aperture Size

Sets Aperture size.

![The image features a white sheet of paper with a folded top-right corner. Faint gray horizontal lines run across the page. A large, bold red checkmark is superimposed over the center, slanting upward from left to right.](.nupro-e43-50m-41809-2010-21-231102/42ac0a3a39a14eefe7fc0a07427f3b428fa607b018b666557b47df03d40d71a5.jpg)
NOTE:

Above 4GB MMIO BIOS assignment is automatically enabled when a 2048MB aperture is set; to use, disable CSM Support.

# DVMT Pre-Allocated

Sets DVMT 5.0 Pre-Allocated (Fixed) graphics memory size used by the internal graphics device.

# DVMT Total Gfx Mem

Sets DVMT5.0 total graphic memory size used by the internal graphics device.

# A.3.5 PCI Express Configuration

PCI Express port allocation B0 to B3 depends on backplane design, whether 1x4 or 4x1.

![Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.\nAdvanced\nPCI Express Configuration\n► PEG Port Configuration\n► PCI Express Port B0\n► PCI Express Port B1\n► PCI Express Port B2\n► PCI Express Port B3\nPEG Port Options\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit\nVersion 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.](.nupro-e43-50m-41809-2010-21-231102/bf452086db9d4196e92fa29104aefb702bb2a4b8e5ffd4b7c76167f2a3c6c33f.jpg)

# A.3.5.1 PEG Port Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc. Advanced</td></tr><tr><td>PEG Port Configuration
PEG 1
Max Link Speed
Max Payload size</td><td>X1 Gen1
[Auto]
[Auto]</td></tr><tr><td>PEG 2
Max Link Speed</td><td>Not Present
[Auto]</td></tr><tr><td>PEG 3
Max Link Speed</td><td>Not Present
[Auto]</td></tr><tr><td></td><td></td></tr><tr><td></td><td></td></tr><tr><td colspan="2">+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.</td></tr></table>

# Peg 1

# Max Link Speed

Sets PEG 1 maximum speed, from among Auto, Gen1, Gen2, and Gen3.

# Max Payload size

(Appears if a PEG 1 device is present)

Sets PEG 1 maximum payload size, from Auto (Default Device Capability) or forced to 128/256 bytes.

# Peg 2

# Max Link Speed

Sets PEG 2 maximum speed, from among Auto, Gen1, Gen2, and Gen3.

# Max Payload size

(Appears if a PEG 2 device is present)

Sets PEG 2 maximum payload size, from Auto (Default Device

Capability) or forced to 128/256 bytes.

# Peg 3

# Max Link Speed

Sets PEG 3 maximum speed, from among Auto, Gen1, Gen2, and Gen3.

# Max Payload size

(Appears if a PEG 3 device is present)

Sets PEG 3 maximum payload size, from Auto (Default Device

Capability) or forced to 128/256 bytes.

# A.3.5.2 PCI Express Ports B0 to B3

<table><tr><td rowspan="2">PCI Express Port B0
PCIe Speed [Auto]
Detect Non-Compliance Device [Disabled]</td><td>Select PCI Express port speed.</td></tr><tr><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255, Copyright (C) 2016 American Megatrends, Inc.</td></tr></table>

# PCIe Speed

Sets PCI Express port speed from among Auto, Gen1, Gen2, and Gen3.

# Detect Non-Compliance Device

Detects non-compliant PCI Express device. If enabled, increases POST duration.

# A.3.6 USB Configuration

![Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.\nAdvanced\nUSB Configuration\nUSB Precondition	(Disabled)\nUSB Port Disable Override	(Select Per-Pin)\nUSB3 Rear Port 1	(Enabled)\nUSB3 Rear Port 2	(Enabled)\nUSB3 BOX Header A1	(Enabled)\nUSB3 BOX Header A2	(Enabled)\nUSB3 BOX Header B1	(Enabled)\nUSB3 BOX Header B2	(Enabled)\nUSB3 BOX Header C1	(Enabled)\nUSB3 BOX Header C2	(Enabled)\nUSB2 Rear Port 1	(Enabled)\nUSB2 Rear Port 2	(Enabled)\nUSB2 BOX Header A1	(Enabled)\nUSB2 BOX Header A2	(Enabled)\nUSB2 BOX Header B1	(Enabled)\nUSB2 BOX Header B2	(Enabled)\nUSB2 BOX Header C1	(Enabled)\nUSB2 BOX Header C2	(Enabled)\nSHB Connector C USB0	(Enabled)\nSHB Connector C USB1	(Enabled)\nSHB Connector C USB2	(Enabled)\nSHB Connector C USB3	(Enabled)\nPrecondition work on USB host\ncontroller and root ports for\nfaster enumeration.\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit\nVersion 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.](.nupro-e43-50m-41809-2010-21-231102/5985c8f5ed8acb0a6df3e258775197028743d0ff82bd0e9b5d026ff9fe45e93e.jpg)

![Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.\nAdvanced\nUSB3 BOX Header B1	(Enabled)\nUSB3 BOX Header B2	(Enabled)\nUSB3 BOX Header C1	(Enabled)\nUSB3 BOX Header C2	(Enabled)\nUSB2 Rear Port 1	(Enabled)\nUSB2 Rear Port 2	(Enabled)\nUSB2 BOX Header A1	(Enabled)\nUSB2 BOX Header A2	(Enabled)\nUSB2 BOX Header B1	(Enabled)\nUSB2 BOX Header B2	(Enabled)\nUSB2 BOX Header C1	(Enabled)\nUSB2 BOX Header C2	(Enabled)\nSHB Connector C USB0	(Enabled)\nSHB Connector C USB1	(Enabled)\nSHB Connector C USB2	(Enabled)\nSHB Connector C USB3	(Enabled)\nLegacy USB Support	(Enabled)\nXHCI Hand-off	(Enabled)\nUSB Mass Storage Driver Support	(Enabled)\nUSB hardware delays and time-outs:\nUSB transfer time-out	(20 sec)\nDevice reset time-out	(20 sec)\nDevice power-up delay	(Auto)\nMaximum time the device will\ntake before it properly\nreports itself to the Host\nController. 'Auto' uses\ndefault value: for a Root port\nit is 100 ms, for a Hub port\nthe delay is taken from Hub\ndescriptor.\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit\nVersion 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.](.nupro-e43-50m-41809-2010-21-231102/9b3640efe35766c5dbb251361b01785aae40c8d691d3fe595e33c265a3ecc97a.jpg)

# USB Precondition

Presets USB host controller and root ports for faster enumeration.

# USB Port Disable Override

Selectively enables/disables the corresponding USB port from reporting a device connection to the controller.

# USB3 Rear Port 1 to USB3 Rear Port 2

Enables/disables port.

# USB3 BOX Header A1 to USB3 BOX Header A2

Enables/disables port.

# USB3 BOX Header B1 to USB3 BOX Header B2

Enables/disables port.

# USB3 BOX Header C1 to USB3 BOX Header C2

Enables/disables port.

# USB2 Rear Port 1 to USB2 Rear Port 2

Enables/disables port.

# USB2 BOX Header A1 to USB2 BOX Header A2

Enables/disables port.

# USB2 BOX Header B1 to USB2 BOX Header B2

Enables/disables port.

# USB2 BOX Header C1 to USB2 BOX Header C2

Enables/disables port.

# SHB Connector C USB0 to SHB Connector C USB3

Enables/disables port.

# Legacy USB Support

Enables Legacy USB support.

AUTO disables legacy support if no USB devices are connected, DISABLE maintains USB device availability only for EFI applications.

# XHCI Hand-off

For OS without XHCI hand-off support, with XHCI ownership change claimed by XHCI driver.

# USB Mass Storage Driver Support

Enables/disables USB Mass Storage Driver Support.

# USB transfer timeout

Sets timeout value for Control, Bulk, and Interrupt transfers, from among 1, 5, 10, and 20 sec.

# Device reset timeout

Sets USB mass storage device Start Unit command timeout, from among 10, 20, 30, and 40 sec.

# Device power-up delay

Sets the maximum time before the device reports itself to the Host Controller, with Auto using a default Root port value of 100 ms with Hub port delay obtained from the Hub descriptor, and Manual delay range set from 1 to 40 seconds in one second increments.

# A.3.7 SATA Configuration

<table><tr><td rowspan="2" colspan="2">SATA Configuration SATA Controller(s) [Enabled] SATA Mode Selection [AHC1] Aggressive LPM Support [Enabled] SATA Controller Speed [Default] Software Feature Mask Configuration Serial ATA Port 0 WDC WD5000AAKX (500.1GB) Software Preserve SUPPORTED Port 0 [Enabled] Serial ATA Port 1 Empty Software Preserve Unknown Port 1 [Enabled] Serial ATA Port 2 Empty Software Preserve Unknown Port 2 [Enabled] Serial ATA Port 3 Empty Software Preserve Unknown Port 3 [Enabled]</td><td>Enable or disable SATA Device.</td></tr><tr><td>+: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="3">Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.</td></tr></table>

# SATA Controller(s)

Enables/disables SATA Device.

# SATA Mode Selection

Determines how SATA controller(s) operate.

# Alternate ID

(Appears if SATA is in RAID mode)

Reports alternate device ID.

# Aggressive LPM Support

Enables PCH to aggressively enter a link power state.

# SATA Controller Speed

Sets the maximum speed the SATA controller can support, from among Default, Gen1, Gen2, and Gen3.

# Port 0 to Port 3

Enables/disables SATA port.

# A.3.7.1 Software Feature Mask Configuration

![Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.\nAdvanced\nRAID0	(Enabled)\nRAID1	(Enabled)\nRAID10	(Enabled)\nRAID5	(Enabled)\nEnable or disable RAID0\nfeature.\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit\nVersion 2.17.1255, Copyright (C) 2016 American Megatrends, Inc.](.nupro-e43-50m-41809-2010-21-231102/92dad8edd03d9cd41ceb0a87db517f97a8c6974ea14f5a8612d8233af700d715.jpg)

# RAID0

Enables/disables RAID0 feature.

# RAID1

Enables/disables RAID1 feature.

# RAID10

Enables/disables RAID10 feature.

# RAID5

Enables/disables RAID5 feature.

# A.3.8 Onboard Device Configuration

<table><tr><td colspan="2">Optio Setup Utility - Copyright (C) 2016 American Megatrends, Inc. Advanced</td><td></td></tr><tr><td colspan="2">Onboard Devices Configuration Serial Port Configuration COM1 [Enabled] COM1 Device Settings IO=3F8h; IRQ=4; COM1 Control [RS232] COM2 [Enabled] COM2 Device Settings IO=2F8h; IRQ=3; COM2 Control [RS232] COM3 [Enabled] COM3 Device Settings IO=3E8h; IRQ=5; COM4 [Enabled] COM4 Device Settings IO=2E8h; IRQ=7; Serial Port Console Redirection Parallel Port Configuration LPT [Enabled] LPT Device Settings IO=378h; IRQ=14; Device Mode [STD Printer Mode] Lan Port Configuration LAN #1 (Intel I219) [Enabled] LAN #1(I219) Launch PXE OpROM [Disabled] LAN #2 (Intel I211) [Enabled] LAN #2(I211) Launch PXE OpROM [Disabled]</td><td>Enable or Disable COM1 +/-: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="3">Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.</td></tr></table>

# COM1 to COM4

Enables/disables individual COM ports.

# COM1 Control

Sets COM1 mode from among RS232, RS422, and RS485.

# COM2 Control

Sets COM2 mode from among RS232, RS422, and RS485.

# LPT

Enables/disables LPT.

# Device Mode

Sets Printer port mode from among STD Printer Mode, SPP Mode, EPP-1.9 and SPP Mode, EPP-1.7 and SPP Mode.

# LAN #1 (Intel I219)

Enables/disables LAN #1.

# LAN #1(I219) Launch PXE OpROM

Enables/disables Boot Option for Legacy Network Devices.

# LAN #2 (Intel I211)

Enables/disables LAN #2.

# LAN #2(I211) Launch PXE OpROM

Enables/disables Boot Option for Legacy Network Devices.

# A.3.8.1 Serial Port Console Redirection

# Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.

# Advanced

Serial Port Console Redirection

COM1

Console Redirection [Disabled]

▶ Console Redirection Settings

COM2

Console Redirection [Disabled]

▶ Console Redirection Settings

COM3

Console Redirection [Disabled]

▶ Console Redirection Settings

COM4

Console Redirection [Disabled]

▶ Console Redirection Settings

COM(Pci Bus0, Dev22, Func3)

Console Redirection [Disabled]

▶ Console Redirection Settings

Serial Port for Out-of-Band Management/

Windows Emergency Management Services (EMS)

Console Redirection [Disabled]

Console Redirection Enable or Disable.

++: Select Screen

↑↓: Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC: Exit

Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.

# Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.

# Advanced

COM1

Console Redirection [Disabled]

▶ Console Redirection Settings

COM2

Console Redirection [Disabled]

▶ Console Redirection Settings

COM3

Console Redirection [Disabled]

▶ Console Redirection Settings

COM4

Console Redirection [Disabled]

▶ Console Redirection Settings

COM(Pci Bus0, Dev22, Func3)

Console Redirection [Disabled]

▶ Console Redirection Settings

Serial Port for Out-of-Band Management/

Windows Emergency Management Services (EMS)

Console Redirection [Disabled]

▶ Console Redirection Settings

Console Redirection Enable or Disable.

++: Select Screen

↑↓: Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC: Exit

Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.

# Console Redirection

Enables/disables console redirection.

# Console Redirection Settings

(Depends on Console Redirection setting))

Specify how the host computer and the remote console computer (in use) exchange data. Both computers should have the same or compatible settings.

# COM1 Console Redirection Settings

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.</td></tr><tr><td>Main</td><td></td></tr><tr><td>COM1
Console Redirection Settings
Terminal Type [ANSI]
Bits per second [115200]
Data Bits [8]
Parity [None]
Stop Bits [1]
Flow Control [None]
VT-UTF8 Combo Key Support [Enabled]
Recorder Mode [Disabled]
Resolution 100x31 [Disabled]
Legacy OS Redirection Resolution [80x24]
Putty Keypad [VT100]
Redirection After BIOS POST [Always Enable]</td><td>Emulation: ANSI: Extended
ASCII char set. VT100: ASCII
char set. VT100+: Extends
VT100 to support color,
function keys, etc. VT-UTF8:
Uses UTF8 encoding to map
Unicode chars onto 1 or more
bytes.
+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.</td></tr></table>

# COM2 Console Redirection Settings

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.</td></tr><tr><td>COM2Console Redirection SettingsTerminal Type [ANSI]Bits per second [115200]Data Bits [8]Parity [None]Stop Bits [1]Flow Control [None]VT-UTF8 Combo Key Support [Enabled]Recorder Mode [Disabled]Resolution 100x31 [Disabled]Legacy OS Redirection Resolution [80x24]Putty KeyPad [VT100]Redirection After BIOS POST [Always Enable]</td><td>Emulation: ANSI: ExtendedASCII char set. VT100: ASCIIchar set. VT100+: ExtendsVT100 to support color, function keys, etc. VT-UTF8:Uses UTF8 encoding to mapUnicode chars onto 1 or more bytes.+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF2: Previous ValuesF3: Optimized DefaultsF4: Save &amp; ExitESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.</td></tr></table>

# COM3 Console Redirection Settings

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.</td></tr><tr><td>COM3Console Redirection SettingsTerminal Type [ANSI]Bits per second [115200]Data Bits [8]Parity [None]Stop Bits [1]Flow Control [None]VT-UTF8 Combo Key Support [Enabled]Recorder Mode [Disabled]Resolution 100x31 [Disabled]Legacy OS Redirection Resolution [80x24]Putty KeyPad [VT100]Redirection After BIOS POST [Always Enable]</td><td>Emulation: ANSI: ExtendedASCII char set. VT100: ASCIIchar set. VT100+: ExtendsVT100 to support color, function keys, etc. VT-UTF8:Uses UTF8 encoding to mapUnicode chars onto 1 or more bytes.+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF2: Previous ValuesF3: Optimized DefaultsF4: Save &amp; ExitESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.</td></tr></table>

# COM4 Console Redirection Settings

Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.

Main

COM4

Console Redirection Settings

Terminal Type

Bits per second

Data Bits

Parity

Stop Bits

Flow Control

VT-UTF8 Combo Key Support

Recorder Mode

Resolution 100x31

Legacy OS Redirection Resolution

Putty KeyPad

Redirection After BIOS POST

[ANSI]

[115200]

[8]

[None]

[1]

[None]

[Enabled]

[Disabled]

[Disabled]

[80×24]

[VT100]

[Always Enable]

Emulation: ANSI: Extended

ASCII char set. VT100: ASCII

char set. VT100+: Extends

VT100 to support color,

function keys, etc. VT-UTF8:

Uses UTF8 encoding to map

Unicode chars onto 1 or more

bytes.

++: Select Screen

↑↓: Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC: Exit

Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.

# COM (PCI) Console Redirection Settings

Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.

Main

COM(Pci Bus0,Dev22,Func3)

Console Redirection Settings

Terminal Type

Bits per second

Data Bits

Parity

Stop Bits

Flow Control

VT-UTF8 Combo Key Support

Recorder Mode

Resolution 100x31

Legacy OS Redirection Resolution

Putty KeyPad

Redirection After BIOS POST

[ANSI]

[115200]

[8]

[None]

[1]

[None]

[Enabled]

[Disabled]

[Disabled]

[80×24]

[VT100]

[Always Enable]

Emulation: ANSI: Extended

ASCII char set. VT100: ASCII

char set. VT100+: Extends

VT100 to support color,

function keys, etc. VT-UTF8:

Uses UTF8 encoding to map

Unicode chars onto 1 or more

bytes.

++: Select Screen

↑↓: Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC: Exit

Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.

# Terminal Type

Emulation:.

<table><tr><td>ANSI</td><td>Extended ASCII character set</td></tr><tr><td>VT100</td><td>ASCII character set</td></tr><tr><td>VT100+</td><td>Extends VT100 to support color, function keys, etc.</td></tr><tr><td>VT-UTF8</td><td>UTF8 encoding maps Unicode characters onto 1 or more bytes</td></tr></table>

# Bits per second

Sets serial port transmission speed, which must be matched on the other side, with long or noisy lines possibly requiring lower speeds, from among 9600, 19200, 38400, 57600, and 115200.

# Data Bits

Sets data bit count, from 7 or 8.

# Parity

Parity bit can be sent with the data bits to detect transmission errors.

<table><tr><td>Even</td><td>Parity bit is 0 if the 1 count in the data bits is even</td></tr><tr><td>Odd</td><td>Parity bit is 0 if the 1 count in the data bits is odd</td></tr><tr><td>Mark</td><td>Parity bit is always 1</td></tr><tr><td>Space</td><td>Parity bit is always 0</td></tr></table>

Mark and Space Parity do not allow error detection, and can be used as an additional data bit.

# Stop Bits

Indicate the end of a serial data packet (as opposed to a start bit indicating the beginning) with the standard setting 1 stop bit. Communication with slower devices may require more than 1 stop bit.

# Flow Control

Can prevent data loss from buffer overflow. When sending data, if the receiving buffers are full, a Stop signal stops the ANSI Extended ASCII character set.

# VT100 ASCII character set

Enables VT-UTF8 combination key support for ANSI/VT100 terminals.

# Recorder Mode

When enabled, only text is transmitted, to capture terminal data.

# Resolution 100x31

Enables/disables extended terminal resolution.

# Legacy OS Redirection Resolution

In legacy OS, sets the number of rows and columns supported for redirection.

# Putty KeyPad

Selects FunctionKey and KeyPad on Putty, from among VT100, LINUX, XTERMR6, SCO, ESCN, and VT400.

# Redirection After BIOS POST

If BootLoader is selected, legacy console redirection is disabled before booting to the legacy OS. Default is Always Enable.

# EMS Console Redirection Settings

![Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.\nAdvanced\nOut-of-Band Mgmt Port (COM1)\nTerminal Type (VT-UTF8)\nBits per second (115200)\nFlow Control (None)\nData Bits 8\nParity None\nStop Bits 1\nMicrosoft Windows Emergency\nManagement Services (EMS)\nallows for remote management\nof a Windows Server OS through\na serial port.\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit\nVersion 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.](.nupro-e43-50m-41809-2010-21-231102/ab3f9159942c23b8519f8a08e66496b84f4898f3c16e00f417cbaa8f79390114.jpg)

# Out-of-Band Mgmt Port

Microsoft Windows Emergency Management Services (EMS) allows remote management of Windows Server OS through a serial port, from among COM1, COM2, COM3, COM4, and COM (PCI Bus0, Dev22, Func3).

# Terminal Type

VT-UTF8 is the preferred terminal type for out-of-band management, followed by VT100+ and then VT100, from among VT100, VT100+, VT-UTF8, and ANSI. See Console Redirection Settings for more about Terminal Type/Emulation.

# Bits per second

Sets serial port transmission speed, which must be matched on the other side, with long or noisy lines possibly requiring lower speeds, from among 9600, 19200, 57600, and 115200.

# Flow Control

Can prevent data loss from buffer overflow. When sending data, if the receiving buffers are full, a Stop signal stops the data flow. Once the buffers are empty, a Start signal restarts the flow. Hardware flow control uses two lines to send start/stop signals.

# A.3.9 Advanced Power Management

<table><tr><td colspan="2">Advanced Setup Utility - Copyright (C) 2016 American Megatrends, Inc. Advanced</td></tr><tr><td>Power Supply Unit [ATX Mode] State After G3 [Last State] RTC Wake system from S5 [Disabled] PCIe Slot Wake [Enabled] Onboard LAN Wake [Enabled] PCI/SIO Wake [Enabled] BIOS POST Watchdog [Disabled]</td><td>ATX: DS will turn off system power when shutdown. NOTE: AT mode will not support S3 &amp; S4.</td></tr><tr><td></td><td>+: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.</td></tr></table>

# Power Supply Unit

In ATX, the OS turns off system power when shut down.

![The image displays a white document icon featuring a folded top corner and faint horizontal lines. A large red checkmark is drawn over the right side of the document.](.nupro-e43-50m-41809-2010-21-231102/89c69ef12cb334fabe497397cf2b66db991dd58796825219cd0a29c8fb30596b.jpg)

NOTE:

AT mode will not support S3 & S4.

# State After G3

Sets the state entered when power is re-applied after a power failure (G3 state), from among Power On, Power Off, and Last State.

# RTC Wake system from S5

Enables/disables system wake on alarm event, with FixedTime waking the system at specified hr::min::sec, and DynamicTime waking the system at the current time + one minute.

# PCIe Slot Wake

Enables/disables PCI Express Slot wake function.

# Onboard LAN Wake

Enables/disables onboard LAN wake function.

# PCI/SIO Wake

Enables/disables PCI/SIO wake function.

# BIOS POST Watchdog

Sets watchdog timer for BIOS POST process, from among Disabled, Second Mode, and Minute Mode.

# BIOS Watchdog Timer

Appears if BIOS POST Watchdog is enabled. Sets watchdog timer for BIOS POST process.

# A.3.10 TPM 1.2 Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc. Advanced</td></tr><tr><td rowspan="2">TPM 1.2 Configuration Security Device Support [Enable] TPM State [Enabled] Pending operation [None] Current Status Information TPM Enabled Status: [Enabled] TPM Active Status: [Activated] TPM Owner Status: [Unowned]</td><td>Enables or Disables BIOS support for security device. O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available.</td></tr><tr><td>+: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.</td></tr></table>

Appears if a TPM device is present.

# Security Device Support

Enables/disables BIOS support for security device. When disabled, OS will not show the Security Device and TCG EFI protocol and INT1A interface will not be available.

# TPM State

Enables/disables the security device.

![The image displays a standard 'document' or 'file' icon. It features a white page with a folded upper-right corner and faint grey horizontal lines running across it to represent text. A large, bold red checkmark is superimposed diagonally over the center of the document. There is no actual text present in the image.](.nupro-e43-50m-41809-2010-21-231102/b621b18dc6f60e492d9b2fdf3f943c8b44a1a2013e195e97f5ef07acf84db5b3.jpg)
NOTE:

The computer reboots during restart to change State of the Device.

# Pending Operation

Schedules an operation for the security device.

![The image displays a standard icon of a document or checklist. It features a white page with a folded top-right corner. Faint grey horizontal lines run across the body of the page, suggesting text or list items. A large, bold red checkmark (or tick) is superimposed over the left side of the document.](.nupro-e43-50m-41809-2010-21-231102/88ddb337694f25c832bdde7491953db5e8bf04704a5f2603708901cf5ebb59ff.jpg)
NOTE:

The computer reboots during restart to change State of Security Device.

# A.3.11 AMT Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc. Advanced</td></tr><tr><td rowspan="2">AMT Configuration Intel AMT [Enabled] BIOS Hotkey Pressed [Disabled]</td><td>Enable/Disable Intel (R) Active Management Technology BIOS Extension. Note : iAMT H/W is always enabled. This option just controls the BIOS extension execution. If enabled, this requires additional firmware in the SPI device</td></tr><tr><td>+: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &amp; Exit ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.</td></tr></table>

# Intel AMT

Enables/disables Intel® Active Management Technology BIOS Extension. While iAMT H/W is always enabled, this option controls the BIOS extension execution. If enabled, additional firmware is required in the SPI device.

# BIOS Hotkey Pressed

OEMFLag Bit 1: Enables/disables BIOS hotkey.

# A.3.12 Intel® Bios Guard Technology

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc. Advanced</td></tr><tr><td rowspan="2">Intel(R) Bios Guard Technology
Intel Bios Guard Support [Disabled]</td><td>Enable/Disable Intel Bios Guard Support</td></tr><tr><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.</td></tr></table>

# Intel® Bios Guard Support

Enables/disables Intel® BIOS Guard support.

# A.3.13 Network Stack Configuration

![Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.\nAdvanced\nNetwork Stack Configuration\nNetwork Stack (Disabled)\nEnable/Disable UEFI Network Stack\n+: Select Screen\n↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit\nVersion 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.](.nupro-e43-50m-41809-2010-21-231102/a9ec736165aa90b3fa6657dd1240202067803b8e5fae6ce1f162da3e7a70ad15.jpg)

# Network Stack

Enables/disables UEFI Network Stack.

# Ipv4 PXE Support

Appears if Network Stack is enabled.

Enables lpv4 PXE boot support, if disabled no IPV4 PXE boot option is created

# Ipv6 PXE Support

Appears if Network Stack is enabled.

Enables lpv6 PXE boot support, if disabled no IPV6 PXE boot option is created.

# PXE boot wait time

Appears if Network Stack is enabled.

Sets wait duration to press ESC key to abort PXE boot.

# A.3.14 CSM Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc. Advanced</td></tr><tr><td>CSM Configuration</td><td>Enable/Disable CSM Support.</td></tr><tr><td>CSM Support [Enabled]</td><td></td></tr><tr><td>CSM16 Module Version 07.79</td><td></td></tr><tr><td>GateA20 Active [Upon Request]</td><td></td></tr><tr><td>Option ROM Messages [Force BIOS]</td><td></td></tr><tr><td>Option ROM execution</td><td></td></tr><tr><td>Network [Do not launch]</td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td>Storage [Do not launch]</td><td></td></tr><tr><td>Video [Legacy]</td><td></td></tr><tr><td>Other PCI devices [Do not launch]</td><td></td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.</td></tr></table>

# CSM Support

Enables/disables CSM Support.

# GateA20 Active

UPON REQUEST to GA20 can be disabled using BIOS services.

ALWAYS prevents disabling GA20, useful when any RT code exceeding 1MB is executed.

# Option ROM Messages

Sets display mode for Option ROM, from Force BIOS or Keep Current.

# Network

Controls execution of UEFI and legacy PXE OpROM.

# Storage

Controls execution of UEFI and legacy storage OpROM.

# Video

Controls execution of UEFI and legacy video OpROM.

# Other PCI devices

Sets OpROM execution policy for devices other than network, storage, or video.

# A.3.15 System Management

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc. Advanced</td></tr><tr><td rowspan="2">System Management
Version: 1.00
Overview
► Board Information
System Health
► Temperatures and Fan Speed
► Power Consumption
► Runtime Statistics
► Flags
Hardware Controls
► Power Up
► Smart Fan</td><td>Board Information</td></tr><tr><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.</td></tr></table>

# A.3.15.1 Board Information

![Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.\nAdvanced\nBoard Information\nSEMA Firmware	BMC NuPRO-E43 0v5\nBuild Date	Mar 15 2016\nSEMA Bootloader	b1_NuPRO-E43 4v1\nBuild Date	Mar 15 2016\nHardware Version	N/A\nSerial Number	N/A\nManufacturing Date	N/A\nLast Repair Date	N/A\nMAC ID	N/A\nSEMA Features:\nUptime & Power Cycles Counter\nSystem Restart Event\n1024 Bytes User-Flash\nWatchdog\nTemperatures\nVoltage Monitor\nPower-Up Watchdog\nBoot Counter\n12V Input-Voltage\n4mR Rsense for Input-Voltage\nProgrammable CPU fan\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit\nVersion 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.](.nupro-e43-50m-41809-2010-21-231102/ed8f89b713c6482160873d72050501bcdbe243451a81fc041b10fa89c4301a02.jpg)

Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.

Advanced

<table><tr><td>SEMA Firmware</td><td>BMC NuPRO-E43 0v5</td></tr><tr><td>Build Date</td><td>Mar 15 2016</td></tr><tr><td>SEMA Bootloader</td><td>bl_NuPRO-E43 4v1</td></tr><tr><td>Build Date</td><td>Mar 15 2016</td></tr></table>

<table><tr><td>Hardware Version</td><td>N/A</td></tr><tr><td>Serial Number</td><td>N/A</td></tr><tr><td>Manufacturing Date</td><td>N/A</td></tr><tr><td>Last Repair Date</td><td>N/A</td></tr><tr><td>MAC ID</td><td>N/A</td></tr></table>

<table><tr><td>SEMA Features:</td></tr><tr><td>Uptime &amp; Power Cycles Counter</td></tr><tr><td>System Restart Event</td></tr><tr><td>1024 Bytes User-Flash</td></tr><tr><td>Watchdog</td></tr><tr><td>Temperatures</td></tr><tr><td>Voltage Monitor</td></tr><tr><td>Power-Up Watchdog</td></tr><tr><td>Boot Counter</td></tr><tr><td>12V Input-Voltage</td></tr><tr><td>4mR Rsense for Input-Voltage</td></tr><tr><td>Programmable CPU fan</td></tr><tr><td>TIVA BMC</td></tr></table>

<table><tr><td>++: Select Screen</td></tr><tr><td>↑↓: Select Item</td></tr><tr><td>Enter: Select</td></tr><tr><td>+/-: Change Opt.</td></tr><tr><td>F1: General Help</td></tr><tr><td>F2: Previous Values</td></tr><tr><td>F3: Optimized Defaults</td></tr><tr><td>F4: Save &amp; Exit</td></tr><tr><td>ESC: Exit</td></tr></table>

Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.

# A.3.15.2 Temperatures and Fan Speed

Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.

Advanced

Temperatures and Fan Speed

<table><tr><td colspan="2">CPU Temperature</td></tr><tr><td>Current</td><td>37.9C</td></tr><tr><td>Startup</td><td>26C</td></tr><tr><td>Min</td><td>21C</td></tr><tr><td>Max</td><td>41C</td></tr></table>

CPU Fan Speed 1055RPM

<table><tr><td>++: Select Screen</td></tr><tr><td>↑↓: Select Item</td></tr><tr><td>Enter: Select</td></tr><tr><td>+/-: Change Opt.</td></tr><tr><td>F1: General Help</td></tr><tr><td>F2: Previous Values</td></tr><tr><td>F3: Optimized Defaults</td></tr><tr><td>F4: Save &amp; Exit</td></tr><tr><td>ESC: Exit</td></tr></table>

Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.

# A.3.15.3 Hardware Monitor

![Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.\nAdvanced\nHardware Monitor\nVCC_CORE	1.141V\nVCC_GT	0.816V\n1V0_A	1.000V\nVDDQ	1.200V\nV3P3S	3.307V\nV3P3A	3.257V\nV5S	5.012V\n0V95_VCCIO	0.974V\nVCCSA	1.061V\nV5VSB	4.989V\nV12S	12.251V\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit\nVersion 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.](.nupro-e43-50m-41809-2010-21-231102/b0005db12c4b8d845d15f04b15370d50a70e0fa6130d68d56520ba2524cb0501.jpg)

# A.3.15.4 Runtime Statistics

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.</td></tr><tr><td>Advanced</td><td></td></tr><tr><td>Runtime Statistics</td><td></td></tr><tr><td>Total Runtime 2h 58m</td><td></td></tr><tr><td>Current Runtime 0h 05m 50s</td><td></td></tr><tr><td>Power Cycles 16</td><td></td></tr><tr><td>Boot Cycles 72</td><td></td></tr><tr><td>Boot Reason Software-reset</td><td></td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.</td></tr></table>

# A.3.15.5 Flags

![Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.\nAdvanced\nFlags\nBMC Flags 0x40\nException Code 0x00\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF2: Previous Values\nF3: Optimized Defaults\nF4: Save & Exit\nESC: Exit\nVersion 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.](.nupro-e43-50m-41809-2010-21-231102/214921ffb81d35c1ffbe7029e2c53b6d9fd89f6c9413e72f60b44d14dd5adeff.jpg)

# A.3.15.6 Power Up

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc. Advanced</td></tr><tr><td>Power Up
Power-Up Watchdog [Disabled]
ATTENTION: Pressing F12 during start up disables the Power Up Watchdog.</td><td>The Power Up Watchdog resets the system after a certain amount of time after power up.
Pressing F12 during start up disables the Power Up Watchdog.</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.</td></tr></table>

# Power-Up Watchdog

Enables/disables the Power-Up Watchdog, which resets the system a set time after power up.

# Timeout

Appears if Power-Up Watchdog is enabled.

Sets the time before the Power Up Watchdog resets the system, from between 24 and 65535.

# A.3.15.7 Smart Fan

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc. Advanced</td></tr><tr><td rowspan="2">Smart FanCPU Fan Mode [AUTO (Smart Fan)]Trigger Point 1Trigger Temperature 40PWM Level 30Trigger Point 2Trigger Temperature 50PWM Level 40Trigger Point 3Trigger Temperature 60PWM Level 63Trigger Point 4Trigger Temperature 84PWM Level 100</td><td>CPU Fan Mode</td></tr><tr><td>+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF2: Previous ValuesF3: Optimized DefaultsF4: Save &amp; ExitESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.</td></tr></table>

# CPU Fan Mode

Sets CPU fan operation, from among AUTO (Smart Fan), Fan Off, and Fan On.

# Trigger Temperature

From 0 to 100°C.

# PWM Level

From 0 to 100kHz.

# A.3.16 Miscellaneous Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc. Advanced</td></tr><tr><td>Miscellaneous Configuration
High Precision Timer [Enabled]
Port 80h Redirection [LPC Bus]
Pcie Pll SSC [Auto]</td><td>Enable or Disable the High Precision Event Timer.</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.</td></tr></table>

# High Precision Timer

Enables/disables High Precision Event timer.

# Port 80h Redirection

Sets destination for Port 80h cycles, from LPC Bus or PCIE Bus.

# Pcie PII SSC

Sets percentage for Pcie PII SSC, with AUTO retaining hw default, with no BIOS override, from 0.0% to 2.0%.

# A.4 Security

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
Advanced</td></tr><tr><td rowspan="2">Miscellaneous Configuration
High Precision Timer [Enabled]
Port 80h Redirection [LPC Bus]
Pcie P11 SSC [Auto]</td><td>Enable or Disable the High Precision Event Timer.</td></tr><tr><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.</td></tr></table>

In addition to allowing supervisor/user passwords to be set, changed, or cleared, the following settings are available.

# Administrator Password

Sets administrator password.

# User Password

Sets user password.

# RTC Lock

When enabled, bytes 38h-3Fh in the lower/upper 128-byte bank of RTC RAM are locked.

# BIOS Lock

Enables/disables PCH BIOS Lock Enable (BLE bit).

# A.5 Boot

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.</td></tr><tr><td colspan="2">Main Advanced Security Boot Save &amp; Exit</td></tr><tr><td rowspan="2">Boot Configuration
Setup Prompt Timeout
Bootup NumLock State
Quiet Boot
Fast Boot
Boot mode select
FIXED BOOT ORDER Priorities
Boot Option #1
Boot Option #2
Boot Option #3
Boot Option #4
Boot Option #5
Boot Option #6
Boot Option #7
Boot Option #8
UEFI Hard Disk Drive BBS Priorities
UEFI USB Key Drive BBS Priorities</td><td>Number of seconds to wait for setup activation key.
65535(0xFFFF) means indefinite waiting.</td></tr><tr><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.</td></tr></table>

# Setup Prompt Timeout

Sets number of seconds to wait for setup activation key, with 65535 (0xFFFF) indicating indefinite wait.

# Bootup NumLock State

Enables/disables keypad NumLock.

# Quiet Boot

Enables/disables Quiet Boot.

# Fast Boot

Enables/disables boot with initialization of the minimal set of required devices for active boot, with no effect on BBS boot options.

# Boot mode select

Selects boot mode from LEGACY or UEFI.

# Boot Options #1 to #8

Sets the system boot order.

# UEFI XXXXXXXX Drive BBS Priorities

Specifies the Boot Device Priority sequence from available UEFI XXXXXXXX drives, appearing when boot mode is set as UEFI, with XXXXXXXX indicating available devices.

# XXXXXXXX Drive BBS Priorities

Specifies the Boot Device Priority sequence from available UEFI XXXXXXXX drives, appearing when boot mode is set as Legacy, with XXXXXXXX indicating available devices.

# A.6 Save & Exit

<table><tr><td colspan="2">Main Advanced Security Boot Save &amp; Exit</td></tr><tr><td>Discard Changes and Exit
Save Changes and Reset
Discard Changes
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
UEFI: SanDisk, Partition 1
Windows Boot Manager (PO: MDC WD5000AAKX-22ERMAO)
Launch EFI Shell from filesystem device</td><td>Exit system setup without saving any changes.
+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.</td></tr></table>

# Discard Changes and Exit

Exits system setup without saving any changes.

# Save Changes and Reset

Resets the system after saving changes.

# Discard Changes

Discards all changes made to any setup options.

# Restore Defaults

Reverts to factory default values for all setup options.

# Save as User Defaults

Saves all changes as User Defaults.

# Restore User Defaults

Reverts to user defaults for all setup options.

# Launch EFI Shell from filesystem device

Initiates launch of the EFI Shell application (Shell.efi) from an available filesystem device.

This page intentionally left blank.

# Appendix B - Watchdog Timer

The watchdog timer on the NuPro-E43 can be implemented by:

▶ Embedded Application Programming Interface (EAPI) library functions
▶ SEMA library functions

Please refer to the SEMA Software Manual for detailed information:

```javascript
http://www.adlinktech.com/PD/web/PD_detail.php?cKind=&pid=1274
```

# EAPI Library Sample Code

Ensure the SEMA driver and application have been installed, and that, during installation, the “Install EAPI” option was enabled.

1. Include the relevant header files

```c
#ifndef _WIN32
#include "linux/EApiOs.h"
#else /* _WIN32 */
#include "winnt/EApiOs.h"
#endif /* _WIN32 */
#include "EApi.h"
```

2. Initialize the EAPI

```javascript
EApiLibInitialize();
```

3. Call the EAPI function

```txt
uint32_t
status=EApiWDogStart(Delay, EventTimeout, ResetTimeout);
```

For detailed information regarding the PICMG EAPI library, please refer to the PICMG EAPI - Embedded Application Programming Interface specification:

http://picmg.staging.wedu.com//wp-contrtent/uploads/COM\_EAPI\_R1\_0.pdf

This page intentionally left blank.

# Appendix C - System Resources

# C.1 System Memory Map

<table><tr><td>Address Range (hex)</td><td>Size</td><td>Description</td></tr><tr><td>FFA00000 – FFFFFFFF</td><td>6 MB</td><td>High BIOS Area</td></tr><tr><td>FEE00000 – FEEFFFFFF</td><td>1 MB</td><td>MSI Interrupts</td></tr><tr><td>FED50000–FED5FFFF</td><td>64kB</td><td>Intel ME</td></tr><tr><td>FED40000 –FED40FFF</td><td>4kB</td><td>TPM</td></tr><tr><td>FED00000 – FED003FF</td><td>1kB</td><td>HPET</td></tr><tr><td>FEC80000 – FECFFFFFF</td><td>512kB</td><td>Local (CPU) APIC</td></tr><tr><td>FEC00000 – FEC7FFFF</td><td>512kB</td><td>I/O APIC</td></tr><tr><td>F0000 – FFFFF</td><td>64 kB</td><td>System BIOS Area (Upper)</td></tr><tr><td>E8000 – EFFFF</td><td>32 kB</td><td>System BIOS Area (Lower)</td></tr><tr><td>C0000 – E7FFF</td><td>160 kB</td><td>PCI expansion ROM area</td></tr><tr><td>A0000 – BFFFF</td><td>128 kB</td><td>Video Buffer &amp; SMM space</td></tr><tr><td>00000 – 9FFFF</td><td>640 kB</td><td>DOS Area</td></tr></table>

# C.2 I/O Map

<table><tr><td>Hex Range</td><td>Device</td></tr><tr><td>020 to 021024 to 025028 to 02902C to 02D</td><td>Interrupt controller, 8259 equivalent</td></tr><tr><td>02E to 02F</td><td>LPC SI/O (NCT6106D) configuration index/data registers</td></tr><tr><td>030 to 031034 to 035038 to 03903C to 03D</td><td>Interrupt controller, 8259 equivalent</td></tr><tr><td>040, 042 to 043050, 052 to 053</td><td>Timer, 8254 equivalent</td></tr><tr><td>060, 062, 064, 066</td><td>Microcontroller</td></tr><tr><td>061, 063, 065, 067</td><td>NMI controller</td></tr><tr><td>070 to 077</td><td>Real time clock controller</td></tr><tr><td>092</td><td>Reset generator</td></tr><tr><td>0A0, 0A10A4 to 0A50A8 to 0A90AC to 0AD0B0 to 0B1</td><td>Interrupt controller, 8259 equivalent</td></tr><tr><td>0B2 to 0B3</td><td>Power management</td></tr><tr><td>0B4 to 0B50B8 to 0B90BC to 0BD</td><td>Interrupt controller, 8259 equivalent</td></tr><tr><td>2E8 to 2EF</td><td>Serial port 4</td></tr><tr><td>2F8 to 2FF</td><td>Serial port 2</td></tr><tr><td>378 to 37F</td><td>Parallel port</td></tr><tr><td>3B0 to 3BB</td><td>Intel® HD Graphics</td></tr><tr><td>3C0 to 3DF</td><td>Intel® HD Graphics</td></tr><tr><td>3E8 to 3EF</td><td>Serial port 3</td></tr><tr><td>3F8 to 3FF</td><td>Serial port 1</td></tr><tr><td>4D0, 4D1</td><td>Interrupt controller, 8259 equivalent</td></tr><tr><td>A00 to A3F</td><td>SIO PME base address</td></tr><tr><td>CF9</td><td>Reset control register (8 bit I/O)</td></tr><tr><td>1800 to 18FE</td><td>SB PM base address</td></tr><tr><td>F000 to F03F</td><td>Intel® HD Graphics</td></tr><tr><td>F040 to F05F</td><td>Intel® SMBus</td></tr><tr><td>F060 to F083F090 to F097</td><td>Intel® SATA Controller</td></tr><tr><td>F0A0 to F0A7</td><td>Intel® AMT to SOL (COM5)</td></tr></table>

# C.3 Interrupt Request (IRQ) Lines

C.3.1 IRQ Lines PIC Mode

<table><tr><td>IRQ#</td><td>Pin</td><td>SERIRQ</td><td>PCI Use</td><td>Interrupt Resource / Function</td></tr><tr><td>0</td><td>No</td><td>No</td><td>No</td><td>Counter 0</td></tr><tr><td>1</td><td>No</td><td>Yes</td><td>No</td><td>Keyboard controller</td></tr><tr><td>2</td><td>No</td><td>No</td><td>No</td><td>Cascade from IRQ9</td></tr><tr><td>3</td><td>PIRQA</td><td>Yes</td><td>No</td><td>Serial Port 2 (COM2)</td></tr><tr><td>4</td><td>PIRQA</td><td>Yes</td><td>No</td><td>Serial Port 1 (COM1)</td></tr><tr><td>5</td><td>PIRQA</td><td>Yes</td><td>No</td><td>Serial Port 3 (COM3)</td></tr><tr><td>6</td><td>PIRQA</td><td>Yes</td><td>No</td><td>Option for configurable sources including PIRQx, GPIO, eSPI and internal PCI/ACPI devices.</td></tr><tr><td>7</td><td>PIRQA</td><td>Yes</td><td>No</td><td>Serial Port 4 (COM4)</td></tr><tr><td>8</td><td>No</td><td>No</td><td>No</td><td>Real-time clock</td></tr><tr><td>9</td><td>PIRQA</td><td>Yes</td><td>No</td><td>Cascade to IRQ2</td></tr><tr><td>10</td><td>PIRQA</td><td>Yes</td><td>Yes</td><td>Option for configurable sources including PIRQx, GPIO, eSPI, internal PCI/ACPI devices, SCI and TCO.</td></tr><tr><td>11</td><td>PIRQA</td><td>Yes</td><td>Yes</td><td>Option for configurable sources including PIRQx, GPIO, eSPI, internal ACPI devices, SCI, TCO, HPET #2</td></tr><tr><td>12</td><td>PIRQA</td><td>Yes</td><td>No</td><td>PS/2 Mouse</td></tr><tr><td>13</td><td>No</td><td>No</td><td>No</td><td>Math Processor</td></tr><tr><td>14</td><td>PIRQA</td><td>Yes</td><td>No</td><td>Parallel Port (LPT)</td></tr><tr><td>15</td><td>PIRQA</td><td>Yes</td><td>Yes</td><td>Option for configurable sources including PIRQx, GPIO, eSPI and internal ACPI devices.</td></tr></table>

C.3.2 IRQ Lines APIC Mode

<table><tr><td>IRQ#</td><td>Pin</td><td>SERIRQ</td><td>PCI Use</td><td>IRQ Sharable</td><td>Interrupt Resource / Function</td></tr><tr><td>0</td><td>No</td><td>No</td><td>No</td><td>No</td><td>Counter 0</td></tr><tr><td>1</td><td>No</td><td>Yes</td><td>No</td><td>No</td><td>Keyboard controller</td></tr><tr><td>2</td><td>No</td><td>No</td><td>No</td><td>No</td><td>Cascade from IRQ9</td></tr><tr><td>3</td><td>No</td><td>Yes</td><td>No</td><td>No</td><td>Serial Port 2 (COM2)</td></tr><tr><td>4</td><td>No</td><td>Yes</td><td>No</td><td>No</td><td>Serial Port 1 (COM1)</td></tr><tr><td>5</td><td>No</td><td>Yes</td><td>No</td><td>No</td><td>Serial Port 3 (COM3)</td></tr><tr><td>6</td><td>No</td><td>Yes</td><td>No</td><td>Yes</td><td>Option for configurable sources including GPIO, eSPI, internal ACPI/ PCI devices.</td></tr><tr><td>7</td><td>No</td><td>Yes</td><td>No</td><td>No</td><td>Serial Port 4 (COM4)</td></tr><tr><td>8</td><td>No</td><td>No</td><td>No</td><td>No</td><td>Real-time clock</td></tr><tr><td>9</td><td>No</td><td>Yes</td><td>No</td><td>No</td><td>Cascade to IRQ2</td></tr><tr><td>10</td><td>No</td><td>Yes</td><td>No</td><td>Yes</td><td>Option for configurable sources including GPIO, eSPI, internal ACPI/ PCI devices, SCI and TCO.</td></tr><tr><td>11</td><td>No</td><td>Yes</td><td>No</td><td>Yes</td><td>Option for configurable sources including GPIO, eSPI, internal ACPI/ PCI devices, SCI, TCO, HPET #2.</td></tr><tr><td>12</td><td>No</td><td>Yes</td><td>No</td><td>No</td><td>PS/2 Mouse</td></tr><tr><td>13</td><td>No</td><td>No</td><td>No</td><td>No</td><td>Math Processor</td></tr><tr><td>14</td><td>No</td><td>Yes</td><td>No</td><td>No</td><td>Parallel Port (LPT)</td></tr><tr><td>15</td><td>No</td><td>Yes</td><td>No</td><td>Yes</td><td>Option for configurable sources including GPIO, eSPI and internal ACPI/PCI devices.</td></tr><tr><td>16</td><td>PIR QA</td><td>PIRQA</td><td>Yes</td><td>Yes</td><td>Option for configurable sources including internal PIRQA, GPIO, eSPI and internal ACPI/PCI devices.</td></tr><tr><td>17</td><td>No</td><td>PIRQ[B-D]</td><td>Yes</td><td>Yes</td><td>Option for configurable sources including internal PIRQ[B-D], GPIO, eSPI and internal ACPI/PCI devices</td></tr><tr><td>18</td><td>No</td><td>PIRQ[B-D]</td><td>Yes</td><td>Yes</td><td>Option for configurable sources including internal PIRQ[B-D], GPIO, eSPI and internal ACPI/PCI devices</td></tr><tr><td>19</td><td>No</td><td>PIRQ[B-D]</td><td>Yes</td><td>Yes</td><td>Option for configurable sources including internal PIRQ[B-D], GPIO, eSPI and internal ACPI/PCI devices</td></tr><tr><td>20</td><td>No</td><td>No</td><td>No</td><td>Yes</td><td>Option for configurable sources including internal PIRQ[E-H], GPIO, eSPI, SCI, TCO, internal ACPI/PCI devices and HPET</td></tr><tr><td>21</td><td>No</td><td>No</td><td>No</td><td>Yes</td><td>Option for configurable sources including internal PIRQ[E-H], GPIO, eSPI, SCI, TCO, internal ACPI/PCI devices and HPET</td></tr><tr><td>22</td><td>No</td><td>No</td><td>No</td><td>Yes</td><td>Option for configurable sources including internal PIRQ[E-H], GPIO, eSPI, SCI, TCO, internal ACPI/PCI devices and HPET</td></tr><tr><td>23</td><td>No</td><td>No</td><td>No</td><td>Yes</td><td>Option for configurable sources including internal PIRQ[E-H], GPIO, eSPI, SCI, TCO, internal ACPI/PCI devices and HPET</td></tr></table>

C.3.3 PCI Configuration Space Map

<table><tr><td>Bus</td><td>Device</td><td>Function</td><td>Routing</td><td>Description</td></tr><tr><td>00h</td><td>00h</td><td>00h</td><td>N/A</td><td>Intel Host Bridge</td></tr><tr><td>00h</td><td>01h</td><td>00h</td><td>Internal</td><td>PEG X16/X8 Root Port</td></tr><tr><td>00h</td><td>01h</td><td>01h</td><td>Internal</td><td>PEG X8/X4 Root Port</td></tr><tr><td>00h</td><td>01h</td><td>02h</td><td>Internal</td><td>PEG X4 Root Port</td></tr><tr><td>00h</td><td>02h</td><td>00h</td><td>Internal</td><td>Intel Integrated Graphics Device</td></tr><tr><td>00h</td><td>14h</td><td>00h</td><td>Internal</td><td>Intel USB XHCI Controller</td></tr><tr><td>00h</td><td>14h</td><td>02h</td><td>Internal</td><td>Intel Thermal Controller</td></tr><tr><td>00h</td><td>15h</td><td>00h</td><td>Internal</td><td>Intel I2C Controller #0</td></tr><tr><td>00h</td><td>15h</td><td>01h</td><td>N/A</td><td>Intel I2C Controller #1</td></tr><tr><td>00h</td><td>16h</td><td>00h</td><td>Internal</td><td>Intel® MEI</td></tr><tr><td>00h</td><td>16h</td><td>03h</td><td>N/A</td><td>Intel Keyboard and Text (KT) Redirection</td></tr><tr><td>00h</td><td>17h</td><td>00h</td><td>Internal</td><td>Intel SATA controller</td></tr><tr><td>00h</td><td>1Ch</td><td>00h</td><td>Internal</td><td>PCI Express Root port 1</td></tr><tr><td>00h</td><td>1Ch</td><td>04h</td><td>Internal</td><td>PCI Express Root port 5</td></tr><tr><td>00h</td><td>1Ch</td><td>05h</td><td>Internal</td><td>PCI Express Root port 6</td></tr><tr><td>00h</td><td>1Ch</td><td>06h</td><td>Internal</td><td>PCI Express Root port 7</td></tr><tr><td>00h</td><td>1Ch</td><td>07h</td><td>Internal</td><td>PCI Express Root port 8</td></tr><tr><td>00h</td><td>1Dh</td><td>00h</td><td>Internal</td><td>PCI Express Root port 9</td></tr><tr><td>00h</td><td>1Dh</td><td>01h</td><td>Internal</td><td>PCI Express Root port 10</td></tr><tr><td>00h</td><td>1Eh</td><td>00h</td><td>Internal</td><td>Intel UART Controller #0</td></tr><tr><td>00h</td><td>1Fh</td><td>00h</td><td>Internal</td><td>Intel LPC or eSPI Controller</td></tr><tr><td>00h</td><td>1Fh</td><td>02h</td><td>N/A</td><td>Intel PMC Controller</td></tr><tr><td>00h</td><td>1Fh</td><td>03h</td><td>Internal</td><td>Intel® High Definition Audio</td></tr><tr><td>00h</td><td>1Fh</td><td>04h</td><td>Internal</td><td>Intel SMBus Controller</td></tr><tr><td>00h</td><td>1Fh</td><td>06h</td><td>Internal</td><td>Intel GbE Controller</td></tr><tr><td>01h</td><td>00h</td><td>00h</td><td>Internal</td><td>PEG X16/X8 SLOT</td></tr><tr><td>02h</td><td>00h</td><td>00h</td><td>Internal</td><td>PEG X8/X4 SLOT</td></tr><tr><td>03h</td><td>00h</td><td>00h</td><td>Internal</td><td>PEG X4 SLOT</td></tr><tr><td>04h</td><td>00h</td><td>00h</td><td>Internal</td><td>PCIE X4/X1 SLOT 1</td></tr><tr><td>05h</td><td>00h</td><td>00h</td><td>Internal</td><td>PCIE X1 SLOT 2</td></tr><tr><td>06h</td><td>00h</td><td>00h</td><td>Internal</td><td>PCIE X1 SLOT 3</td></tr><tr><td>07h</td><td>00h</td><td>00h</td><td>Internal</td><td>PCIE X1 SLOT 4</td></tr><tr><td>08h</td><td>00h</td><td>00h</td><td>Internal</td><td>PCIE To PCI Bridge(IT8892E)</td></tr><tr><td>09h</td><td>0Fh</td><td>00h</td><td>Internal</td><td>PCI SLOT 1</td></tr><tr><td>09h</td><td>0Eh</td><td>00h</td><td>Internal</td><td>PCI SLOT 2</td></tr><tr><td>09h</td><td>0Dh</td><td>00h</td><td>Internal</td><td>PCI SLOT 3</td></tr><tr><td>09h</td><td>0Ch</td><td>00h</td><td>Internal</td><td>PCI SLOT 4</td></tr><tr><td>0Ah</td><td>00h</td><td>00h</td><td>Internal</td><td>Intel I211 LAN Controller</td></tr></table>

# C.3.4 PCI Interrupt Routing Map

<table><tr><td>Description</td><td>A</td><td>B</td><td>C</td><td>D</td></tr><tr><td>PEG X16/X8 Root Port</td><td>INTA</td><td>INTB</td><td>INTC</td><td>INTD</td></tr><tr><td>PEG X8/X4 Root Port</td><td>INTB</td><td>INTC</td><td>INTD</td><td>INTA</td></tr><tr><td>PEG X4 Root Port</td><td>INTC</td><td>INTD</td><td>INTA</td><td>INTB</td></tr><tr><td>Intel Integrated Graphics Device</td><td>INTA</td><td></td><td></td><td></td></tr><tr><td>Intel USB XHCI Controller</td><td>INTA</td><td></td><td></td><td>INTD</td></tr><tr><td>Intel Thermal Controller</td><td></td><td></td><td>INTC</td><td></td></tr><tr><td>Intel I2C Controller #0</td><td>INTA</td><td>INTB</td><td>INTC</td><td>INTD</td></tr><tr><td>Intel® MEI</td><td>INTA</td><td>INTB</td><td>INTC</td><td>INTD</td></tr><tr><td>Intel SATA controller</td><td>INTA</td><td></td><td></td><td></td></tr><tr><td>PCI Express Root port 1</td><td>INTA</td><td>INTB</td><td>INTC</td><td>INTD</td></tr><tr><td>PCI Express Root port 5</td><td>INTA</td><td>INTB</td><td>INTC</td><td>INTD</td></tr><tr><td>PCI Express Root port 6</td><td>INTB</td><td>INTC</td><td>INTD</td><td>INTA</td></tr><tr><td>PCI Express Root port 7</td><td>INTC</td><td>INTD</td><td>INTA</td><td>INTB</td></tr><tr><td>PCI Express Root port 8</td><td>INTD</td><td>INTA</td><td>INTB</td><td>INTC</td></tr><tr><td>PCI Express Root port 9</td><td>INTA</td><td>INTB</td><td>INTC</td><td>INTD</td></tr><tr><td>PCI Express Root port 10</td><td>INTB</td><td>INTC</td><td>INTD</td><td>INTA</td></tr><tr><td>Intel UART Controller #0</td><td>INTA</td><td>INTB</td><td>INTC</td><td>INTD</td></tr><tr><td>Intel LPC or eSPI Controller</td><td>INTA</td><td>INTB</td><td>INTC</td><td>INTD</td></tr><tr><td>Intel® High Definition Audio</td><td>INTA</td><td></td><td></td><td></td></tr><tr><td>Intel SMBus Controller</td><td>INTA</td><td></td><td></td><td></td></tr><tr><td>Intel GbE Controller</td><td>INTA</td><td></td><td></td><td></td></tr><tr><td>PEG X16/X8 SLOT</td><td>INTA</td><td>INTB</td><td>INTC</td><td>INTD</td></tr><tr><td>PEG X8/X4 SLOT</td><td>INTB</td><td>INTC</td><td>INTD</td><td>INTA</td></tr><tr><td>PEG X4 SLOT</td><td>INTC</td><td>INTD</td><td>INTA</td><td>INTB</td></tr><tr><td>PCIE X4/X1 SLOT 1</td><td>INTA</td><td>INTB</td><td>INTC</td><td>INTD</td></tr><tr><td>PCIE X1 SLOT 2</td><td>INTB</td><td>INTC</td><td>INTD</td><td>INTA</td></tr><tr><td>PCIE X1 SLOT 3</td><td>INTC</td><td>INTD</td><td>INTA</td><td>INTB</td></tr><tr><td>PCIE X1 SLOT 4</td><td>INTD</td><td>INTA</td><td>INTB</td><td>INTC</td></tr><tr><td>PCIE To PCI Bridge(IT8892E)</td><td>INTA</td><td>INTB</td><td>INTC</td><td>INTD</td></tr><tr><td>PCI SLOT 1</td><td>INTB</td><td>INTC</td><td>INTD</td><td>INTA</td></tr><tr><td>PCI SLOT 2</td><td>INTC</td><td>INTD</td><td>INTA</td><td>INTB</td></tr><tr><td>PCI SLOT 3</td><td>INTD</td><td>INTA</td><td>INTB</td><td>INTC</td></tr><tr><td>PCI SLOT 4</td><td>INTA</td><td>INTB</td><td>INTC</td><td>INTD</td></tr><tr><td>Intel I211 LAN Controller</td><td>INTB</td><td>INTC</td><td>INTD</td><td>INTA</td></tr></table>

# Important Safety Instructions

For user safety, please read and follow all instructions, WARNINGS, CAUTIONS, and NOTES marked in this manual and on the associated equipment before handling/operating the equipment.

▶ Read these safety instructions carefully.
- Keep this user’s manual for future reference.
▶ Read the specifications section of this manual for detailed information on the operating environment of this equipment.
- When installing/mounting or uninstalling/removing equipment:

▷ Turn off power and unplug any power cords/cables.

▶ To avoid electrical shock and/or damage to equipment:

▷ Keep equipment away from water or liquid sources;
▷ Keep equipment away from high heat or high humidity;
▷ Keep equipment properly ventilated (do not block or cover ventilation openings);

▶ Make sure to use recommended voltage and power source settings;

▶ Always install and operate equipment near an easily accessible electrical socket-outlet;

▷ Secure the power cord (do not place any object on/over the power cord);

▶ Only install/attach and operate equipment on stable surfaces and/or recommended mountings; and,

▷ If the equipment will not be used for long periods of time, turn off and unplug the equipment from its power source.

▶ Never attempt to fix the equipment. Equipment should only be serviced by qualified personnel.

A Lithium-type battery may be provided for uninterrupted, backup or emergency power.

![The image displays a red triangular warning symbol featuring a white exclamation mark in the center. Below the triangle, the word 'WARNING' is written in black, uppercase letters.](.nupro-e43-50m-41809-2010-21-231102/b4f7fa7573b2c1fbde1785a3e48ed6e206379ac5e0a5f0e9c55dac6f0df174ce.jpg)

Risk of explosion if battery is replaced with one of an incorrect type. Dispose of used batteries appropriately.

▶ Equipment must be serviced by authorized technicians when:

▷ The power cord or plug is damaged;
▷ Liquid has penetrated the equipment;
It has been exposed to high humidity/moisture;
$\triangleright$ It is not functioning or does not function according to the user's manual;
It has been dropped and/or damaged; and/or it has an obvious sign of breakage.

![Yellow triangular warning sign with black smoke symbol indicating hot weather or hazard](.nupro-e43-50m-41809-2010-21-231102/bd7fe9537d1a739352042be99ec847859b28fecb967057ed7a94311fa4602ea5.jpg)

# WARNING

# Burn hazard.

Touching this surface could result in bodily injury. To reduce risk of injury allow the surface to cool before touching.

# Getting Service

Ask an Expert: https://www.adlinktech.com/en/Askanexpert

# ADLINK Technology, Inc.

No.66 Huaya 1st Road, Guishan District

Taoyuan City 333, Taiwan

Tel: +886-3-216-5088

Fax: +886-3-328-5706

Email: service@adlinktech.com

# Ampro ADLINK Technology, Inc.

5215 Hellyer Avenue, #110

San Jose, CA 95138, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

Fax: +1-408-360-0222

Email: info@adlinktech.com

# ADLINK Technology (China) Co., Ltd.

300 Fang Chun Rd., Zhangjiang Hi-Tech Park

Pudong New Area, Shanghai, 201203 China

Tel: +86-21-5132-8988

Fax: +86-21-5132-3588

Email: market@adlinktech.com

# ADLINK Technology GmbH

Hans-Thoma-Strasse 11

D-68163 Mannheim, Germany

Tel: +49-621-43214-0

Fax: +49-621 43214-30

Email: emea@adlinktech.com

Please visit the Contact page at www.adlinktech.com for information on how to contact the ADLINK regional office nearest you.

# ADLINK Technology, Inc. (French Liaison Office)

Address: 6 allée de Londres, Immeuble Ceylan
91940 Les Ulis, France

Tel: +33 (0) 1 60 12 35 66

Fax: +33 (0) 1 60 12 35 66

Email: france@adlinktech.com

# ADLINK Technology Japan Corporation

Address: 〒101-0045 東京都千代田区神田鍛冶町 3-7-4
神田 374 ビル 4F
KANDA374 Bldg. 4F, 3-7-4 Kanda Kajicho,
Chiyoda-ku, Tokyo 101-0045, Japan

Tel: +81-3-4455-3722

Fax: +81-3-5209-6013

Email: japan@adlinktech.com

# ADLINK Technology, Inc. (Korean Liaison Office)

Address: 경기도 성남시 분당구 수내로 46 번길 4 경동빌딩 2 층 (수내동 4-4 번지) (우) 463-825

2F, Kyungdong B/D, 4 Sunae-ro 46 beon-gil

Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-825

Toll Free +82-80-800-0585

Tel +82-31-786-0585

Fax +82-31-786-0583

Email: korea@adlinktech.com

# ADLINK Technology Singapore Pte. Ltd.

Address: 84 Genting Lane #07-02A, Cityneon Design Centre Singapore 349584

Tel: +65-6844-2261

Fax: +65-6844-2263

Email: singapore@adlinktech.com

# ADLINK Technology Singapore Pte. Ltd. (Indian Liaison Office)

Address: #50-56, First Floor, Spearhead Towers Margosa Main Road (between 16th/17th Cross) Malleswaram, Bangalore - 560 055, India

Tel: +91-80-65605817, +91-80-42246107

Fax: +91-80-23464606

Email: india@adlinktech.com

# ADLINK Technology, Inc. (Israeli Liaison Office)

Address: 27 Maskit St., Corex Building
PO Box 12777
Herzliya 4673300, Israel

Tel: +972-54-632-5251

Fax: +972-77-208-0230

Email: israel@adlinktech.com

# ADLINK Technology, Inc. (UK Liaison Office)

Tel: +44 774 010 59 65

Email: UK@adlinktech.com
[🔗 Link to the original document](.nupro-e43-50m-41809-2010-21-231102/nupro-e43-50m-41809-2010-21-231102.pdf)