# PCIe-GIE7x Series

# PCIe-GIE72/PCIe-GIE72 PRO

# PCIe-GIE74/PCIe-GIE74 PRO

2/4CH PCI Express®

GigE Vision PoE+ Frame Grabber

![Green printed circuit board with various electronic components and connectors (no visible text or symbols)](.pcie-gie7x-50-11177-2020-31/0a0036d4664fdbfce13f0b9e16ab3730d01595cc967598e7cf1c8e8abeba1718.jpg)

Manual Rev.: 3.1

Revision Date: January 4, 2021

Part No: 50-11177-2020

Revision History

<table><tr><td>Revision</td><td>Release Date</td><td>Description of Change(s)</td></tr><tr><td>2.00</td><td>26-10-2016</td><td>Initial release</td></tr><tr><td>3.00</td><td>26-07-2017</td><td>Update format, added ToE, License content</td></tr><tr><td>3.1</td><td>04-01-2021</td><td>Correct 12V power connector pin assignment</td></tr></table>

# Preface

# Copyright © 2016-2021 ADLINK Technology Inc.

This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

# Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

# Environmental

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.

![Symbol of a trash bin crossed with a diagonal line and a horizontal bar below (no text or labels)](.pcie-gie7x-50-11177-2020-31/afa46318aa03545d33cff56531150eb80d0ef9c57e4484b9772143a9964474d7.jpg)

# Battery Labels (for products with battery)

![Symbol of a trash bin crossed out by two diagonal lines (no text or numbers present)](.pcie-gie7x-50-11177-2020-31/349df42201428a591f27ab23fb4917f21a242c7216bca256640faf382fc6fb79.jpg)

![Simple line drawing of a recycling symbol (three chasing arrows) inside a square frame, no text or labels present.](.pcie-gie7x-50-11177-2020-31/579b266334c6c7d7104d95103798b40fc4b756eddad9d6ca79f4ee6b803b6a8c.jpg)

Li-ion

![RECYCLE\nRBRC\nLi-ion\n1.800.822.8837](.pcie-gie7x-50-11177-2020-31/2cda898d973952eaa99dd62cc74019b95102af1f4d3d2fa504d4028588177b45.jpg)

![Abstract geometric pattern with interlocking X and Y shapes (no text or symbols)](.pcie-gie7x-50-11177-2020-31/5c2a7e0b10d8a3a55069da3fea5b57cf31013e3e97497ed43c55535547d8a24a.jpg)

ᘄ㟁ụㄳᅇᨲ

# California Proposition 65 Warning

![The image displays a standard warning sign consisting of a yellow equilateral triangle with a thick black outline. Centered inside the triangle is a black exclamation point. The background surrounding the sign is white.](.pcie-gie7x-50-11177-2020-31/b9a73b7915dbc3933621f2a5bbf1d9b79b5266ab384202de5a7c08399e2c455a.jpg)

WARNING: This product can expose you to chemicals including acrylamide, arsenic, benzene, cadmium, Tris(1,3-dichloro-2-propyl)phosphate (TDCPP), 1,4-Dioxane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and vinyl materials, which are known to the State of California to cause cancer, and acrylamide, benzene, cadmium, lead, mercury, phthalates, toluene, DEHP, DIDP, DnHP, DBP, BBP, PVC, and vinyl materials, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

# Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

# Conventions

Take note of the following conventions used throughout this manual to make sure that users perform certain tasks and instructions properly.

![The image displays an icon of a white document with a folded top-right corner. Faint horizontal lines run across the page, simulating text. A large, bold red checkmark is centered on the document, angled upwards from left to right.](.pcie-gie7x-50-11177-2020-31/d6dcdd1aa12553e8532abac3dad9b4e47c011860d1a1f6f394e3a4ec455ee56f.jpg)
NOTE:

Additional information, aids, and tips that help users perform tasks.

![A yellow triangular warning sign with a black border containing a black exclamation point in the center.](.pcie-gie7x-50-11177-2020-31/3fd44be0f9a0e2c20d107e70edf5f3739dcf08d929dba76ce897282fd72bba5a.jpg)
CAUTION:

Information to prevent minor physical injury, component damage, data loss, and/or program corruption when trying to complete a task.

![A red equilateral triangle containing a white exclamation point.](.pcie-gie7x-50-11177-2020-31/414ba3b15b2ca650da1c8e7017eef3f9bf082c9bfdfceb0ab4c9f67ea8d8b2fd.jpg)
WARNING:

Information to prevent serious physical injury, component damage, data loss, and/or program corruption when trying to complete a specific task.

# Table of Contents

# Revision History........ ii

# Preface ............. iii

# List of Figures ........ .... vii

# List of Tables ......... ix

# 1 Introduction ......

1.1 Overview ...... 1
1.2 Features...... 2
1.3 Applications ...... 3
1.4 Specifications..... 4
1.5 Power over Ethernet .... 6

1.5.1 PoE vs. PoE+ .. 6
1.5.2 PoE Protection.. 6
1.5.3 PoE Power Management.. 8

1.6 ToE (Trigger over Ethernet) with GigE Vision Action Command 10

1.6.1 About Firmware-based ToE.. .. 10
1.6.2 ToE with Action Command Settings ...... .. 10

1.7 Software License Management .. 11
1.8 Layout, I/O and Indicators... 12

1.8.1 PCIe-GIE74/PCIe-GIE74 PRO ..... .. 12
1.8.2 PCIe-GIE72/PCIe-GIE72 PRO ..... ... 15
1.8.3 RJ-45 Ethernet Port .... .. 18
1.8.4 PoE Status LEDs.... .. 19
1.8.5 4 Pin 12V Power Connector (CN3)..... . 19
1.8.6 6 Pin 12V Power Connector (CN4).... ... 20
1.8.7 Card ID Switch (SW1) .. .. 20
1.8.8 PoE Switch (SW3) ......... .. 22

1.8.9 Onboard LED Status Indicators.. .. 23
1.8.10 Onboard Trigger-in Connector (CN6) . .. 25
1.8.11 I/O Bracket Trigger Connector.... .. 26

# 2 Getting Started ....... 27

2.1 Unpacking Checklist .. 27
2.2 Installation..... . 27

# Important Safety Instructions........ ... 29

# Getting Service ....... . 33

# List of Figures

Figure 1-1: PCIe-GIE74/PCIe-GIE74 PRO PCB Top Layout........... 12

Figure 1-2: PCIe-GIE74/PCIe-GIE74 PRO PCB Underside Layout. 13

Figure 1-3: PCIe-GIE74/PCIe-GIE74 PRO Side View ... . 13

Figure 1-4: PCIe-GIE74/PCIe-GIE74 PRO I/O . . 14

Figure 1-5: PCIe-GIE72/PCIe-GIE72 PRO PCB Top Layout........... 15

Figure 1-6: PCIe-GIE72/PCIe-GIE72 PRO PCB Underside Layout. 15

Figure 1-7: PCIe-GIE72/PCIe-GIE72 PRO Side View ..................... 16

Figure 1-8: PCIe-GIE72/PCIe-GIE72 PRO I/O .. . 17

Figure 1-9: RJ-45 Ethernet Connector... . 18

Figure 1-10: Status LEDs... . 19

Figure 1-11: 4 Pin 12V Power Connector ...... .. 19

Figure 1-12: 6 Pin 12V Power Connector .. .. 20

Figure 1-13: Card ID Switch.. .. 20

Figure 1-14: PoE Switch .. . 22

Figure 1-15: Onboard LED Indicators ... . 23

Figure 1-16: Onboard Trigger-in Connector.. . 25

Figure 1-17: I/O Bracket Trigger Connector... .. 26

This page intentionally left blank.

# List of Tables

Table 1-1: PoE and PoE+ Parameters .. 6

Table 1-2: Over- and Undervoltage Protection Parameters.............. 7

Table 1-3: Icut Per PoE class ..

Table 1-4: Overtemperature Protection (OTP) Parameters .............. 7

Table 1-5: Available Power per PoE Class... 8

Table 1-6: PoE Port Priority . 9

Table 1-7: PoE Power Budget .. 9

Table 1-8: Action Command Messages... . 11

Table 1-9: PCIe-GIE74/PCIe-GIE74 PRO PCB Layout Legend..... 13

Table 1-10: PCIe-GIE72/PCIe-GIE72 PRO PCB Layout Legend..... 16

Table 1-11: RJ-45 Ethernet Port Connector Signals... .. 18

Table 1-12: RJ-45 Ethernet Port LED Indicators ..... . 18

Table 1-13: 4 Pin 12V Power Connector Pin Assignment ................ 19

Table 1-14: 6 Pin 12V Power Connector Pin Assignment ... .. 20

Table 1-15: Card ID Switch Settings.... . 20

Table 1-16: Card ID Switch Legend.. . 21

Table 1-17: PoE Switch Settings ...... . 22

Table 1-18: Onboard LED Indicators Legend .. . 24

Table 1-19: Onboard Trigger-in Connector Pin Assignment............. 25

Table 1-20: I/O Bracket Trigger Connector Pin Assignment............. 26

This page intentionally left blank.

# 1 Introduction

# 1.1 Overview

ADLINK's PCIe-GIE7x Series features PCI Express® x4 lane GigE Vision PoE+ (Power Over Ethernet Plus, IEEE 802.3at) frame grabbers supporting 2/4CH independent Gigabit Ethernet ports for multiple GigE Vision connections with data transfer up to 1 Gb/s per port.

The PCIe-GIE7x's PoE+ offers up to 30W PoE power and automatic detection for stable and reliable connection between PoE, PoE+, or non-PoE cameras and frame grabbers, reducing costs, simplifying installation, and easing maintenance burdens. The series further enhances PoE Protection to protect against undervoltage, overvoltage, overcurrent, and overheating, programmable to not only switch PoE on and off, but also monitor PoE power consumption and automatically manage power budget according to the power source (PCIe or 4/6 pin Molex connector). Available power is directed to higher priority ports if a situation arises in which there is insufficient power for all PoE ports.

The PCIe-GIE72/74, in PRO configuration, fulfills even more application requirements with software license management integrating a Licensed Security EEPROM for third party software, eliminating the need for secure license dongles or other hardware, providing SDK and utilities to license software safely and easily. As well, ToE (Trigger over Ethernet) transmits trigger commands via Ethernet for full synchronization of multi-camera acquisition.

# 1.2 Features

X PCI Express® x4 compliant
X Supports 2/4 independent Gigabit Ethernet ports
? IEEE 802.3at for PoE+ (Power over Ethernet Plus) 50 to 57V, 30W per port
X Up to 20/61.6/120W PoE power supply from PCIe bus or 4- pin/6-pin Molex connector
X Powered Device (PD) auto detection and classification
X Link Aggregation/jumbo frame (9 Kb)
X LED connectivity indicators
X IEEE 1588 (PTP technology, hardware only)
X Multiple card and camera support
X PoE Protection from protect against undervoltage, overvoltage, overcurrent, and overheating
PoE power management, programmable PoE on/off, monitoring POE power consumption and POE budget and priority control
X ToE (Trigger over Ethernet) (PRO only)
X License management (PRO only)
X Windows® 7/8.1/10 OS compatible
X C#, VB.NET/VC++ compatible

# 1.3 Applications

The PCIe-GIE7x Series is ideally suited to frame grab functions in a wide variety of applications, including:

X Machine Vision Inspection systems
X Scientific research instrumentation
X Medical research instrumentation

![The image displays a white document icon with a folded top-right corner and faint horizontal grey lines. A large red checkmark is overlaid diagonally across the center.](.pcie-gie7x-50-11177-2020-31/1cec6c7dae07e4458adb631941d58abb3494288ec4600c993fbebfd719677d05.jpg)
NOTE:

The PCIe-GIE7x Series Function Library Reference can be downloaded from the product’s pages at http://www.adlinktech.com

![The image is a graphic icon depicting a white piece of paper with faint gray horizontal lines, resembling a document. Superimposed over the document is a large, bold red checkmark that slants upwards from left to right.](.pcie-gie7x-50-11177-2020-31/c6ecf0a4f93f12e6dc40abb57a2fb1237de803fc59a1edaac90e5b053292e72b.jpg)
NOTE:

Support for total PoE power up to 120W is only available on the PCIe-GIE74 PRO

# 1.4 Specifications

<table><tr><td></td><td>PCIe-GIE72</td><td>PCIe-GIE72 PRO</td><td>PCIe-GIE74</td><td>PCIe-GIE74 PRO</td></tr><tr><td colspan="5">PCI Express</td></tr><tr><td>PCIe X4 ports</td><td colspan="4">PCIe v2.1 (2.5 GT/s) 1 slot</td></tr><tr><td>Differential Output Peak to Peak Voltage</td><td colspan="4">+0.8V to +1.2V</td></tr><tr><td>Differential Input Peak to Peak Voltage</td><td colspan="4">+0.175V to +1.2V</td></tr><tr><td>Input voltage for PERST#, WAKE#, and SMBus</td><td colspan="4">-0.75V to +4.05V</td></tr><tr><td colspan="5">Gigabit Ethernet</td></tr><tr><td>LAN Chip</td><td colspan="4">Intel® I210, PCIe v2.1 (2.5GT/s)</td></tr><tr><td>Gigabit Ethernet Ports</td><td colspan="4">2/4</td></tr><tr><td colspan="5">PoE Signal</td></tr><tr><td>Max Output Power</td><td colspan="4">PoE+, Power over Ethernet plus, 30W per port, IEEE 802.3at compliant</td></tr><tr><td>PoE Output Voltage</td><td colspan="4">50 to 57V, PoE port positive voltage feed</td></tr><tr><td colspan="5">Physical</td></tr><tr><td>Dimensions</td><td colspan="4">167.6 W x 106.6 H mm (6.6 x 4.2 in.)</td></tr><tr><td>Operating Temperature</td><td colspan="4">► 0°C to 70°C when PoE power is 20W and 61.6W► 0°C to 40°C when PoE power is 120W</td></tr><tr><td>Storage Temperature</td><td colspan="4">-40°C to 85°C</td></tr><tr><td>Safety Compliance</td><td colspan="4">CE/FCC Class B; RoHS</td></tr><tr><td colspan="5">Advanced</td></tr><tr><td>Jumbo Frame</td><td colspan="4">9 KB</td></tr><tr><td>IEEE 1588 (Hardware Only)</td><td colspan="4">Yes</td></tr><tr><td>Link Aggregation</td><td colspan="4">Yes</td></tr><tr><td>Multiple cards</td><td colspan="4">Yes</td></tr><tr><td>PoE+, Power over Ethernet Plus, IEEE 802.3at</td><td colspan="4">Yes</td></tr><tr><td>PoE Protection</td><td colspan="4">Yes</td></tr><tr><td>PoE Power Management</td><td colspan="4">Yes</td></tr><tr><td>License Management</td><td>No</td><td>Yes</td><td>No</td><td>Yes</td></tr><tr><td>ToE, Trigger over Ethernet</td><td>No</td><td>Yes</td><td>No</td><td>Yes</td></tr><tr><td colspan="5">Power Requirements</td></tr><tr><td>Input Voltage</td><td colspan="4">3.3VDC and 12VDC, (w/ PC system power)</td></tr><tr><td>PoE Power w/ PCIe Slot</td><td colspan="4">Max. 20W (+12V@2.1A)</td></tr><tr><td>PoE Power w/ Molex Connector</td><td colspan="3">Max 61.6W for 4-pin (+12V@6A) or 6-pin (+12V@6A)</td><td>Max 120W for both 4-pin (+12V@6A) and 6-pin (+12V@6A)</td></tr></table>

# 1.5 Power over Ethernet

The PCIe-GIE7x Series’ PoE (Power over Ethernet) specification enables the PCIe-GIE7x to act as power sourcing equipment (PSE), providing power through a twisted-pair Ethernet connection to a powered device (PD), such as a GigE Vision camera, IP phone, or wireless access points.

# 1.5.1 PoE vs. PoE+

Power over Ethernet (PoE), based on the IEEE 802.3af standard, delivers power over Ethernet up to 15.4W per port, and Power over Ethernet Plus (PoE+), based on IEEE 802.3at, up to 30W per port.

The PXIe-GIE7x Series supports both PoE and PoE+, automatically detecting which is supported by devices upon connection and supporting the requisite protocol.

<table><tr><td></td><td>PoE(IEEE 802.3af)</td><td>PoE+(IEEE 802.3at)</td></tr><tr><td>Power available at PD</td><td>12.95W</td><td>25.5W</td></tr><tr><td>Maximum power from PSE</td><td>15.4W</td><td>30.0W</td></tr><tr><td>Voltage range (at PSE)</td><td>44.0 to 57.0 V</td><td>50.0 to 57.0 V</td></tr><tr><td>Voltage range (at PD)</td><td>37.0 to 57.0 V</td><td>42.5 to 57.0 V</td></tr><tr><td>Maximum current</td><td>350 mA/mode</td><td>600 mA/mode</td></tr></table>

Table 1-1: PoE and PoE+ Parameters

# 1.5.2 PoE Protection

The PCIe-GIE7x provides PoE Protection from undervoltage, overvoltage, overcurrent, overheating, and budget overages.

# Under- and Overvoltage

PoE output is monitored and power supply to the PD interrupted when any output exceeds OVP (Over Voltage Protection) or falls below UVP (Under Voltage Protection) limits.

<table><tr><td>Normal PoE</td><td>50 to 57V</td></tr><tr><td>UVP</td><td>29V</td></tr><tr><td>OVP</td><td>62V</td></tr></table>

Table 1-2: Over- and Undervoltage Protection Parameters

# Overcurrent Protection

Overcurrent defines a condition in which the current (in amperes) exceeds a rated value, or ICUT, caused by overload, short circuit, or ground fault. The PCIe-GIE7x protects the circuit by shutting down connection to the PD when the current achieves a value that can generate excessive or dangerous temperature rise in conductors.

<table><tr><td>Class</td><td>ICUT</td></tr><tr><td>Class 1</td><td>112mA +/- 5%</td></tr><tr><td>Class 2</td><td>206mA +/- 5%</td></tr><tr><td>Class 3 or Class 0</td><td>375mA +/- 5%</td></tr><tr><td>Class 4</td><td>638mA +/- 5%</td></tr></table>

Table 1-3: Icut Per PoE class

# Overtemperature Protection

Two trigger temperatures, HT (High Temperature) and LT (Low Temperature) respectively can be preset. When HT is reached, the PCIe-GIE7x automatically shuts down PoE power until the temperature sensor falls below LT.

While default values of HT and LT are $\mathfrak { 1 3 0 } ^ { \circ } \mathsf { C }$ and $9 0 ^ { \circ } \mathsf { C }$ respectively, they can be changed via PoE Power Management SDK or Utility, with available range of HT 80 to $\mathfrak { 1 3 0 ^ { \circ } C }$ , and LT 70 to $1 2 0 ^ { \circ } \mathsf { C }$ .

<table><tr><td></td><td>HT</td><td>LT</td></tr><tr><td>Default Value</td><td>130°C</td><td>90°C</td></tr><tr><td>Range</td><td>80 to 130°C</td><td>70 to 120°C</td></tr></table>

Table 1-4: Overtemperature Protection (OTP) Parameters

# 1.5.3 PoE Power Management

PoE device reliability is greatly enhanced with:

X PROgrammable PoE-based on/off switching for each port
PoE power budget management based on power source, with monitoring and reporting of Total Power Budget, Reserved Power, Remaining Unused Budget, and Current Power Usage
X PoE status monitor including PoE classification and voltage/ current for each port
X PoE port priority of Port1/Port2/Port3/Port4
X PCIe-GIE7x Series board information Including available devices, PoE switch (SW3) status, board temperature, and firmware and MCU versions

# PoE Classification

Available power for the PCIe-GIE7x Series is as shown. If PCIe-GIE7x detects no classification of PD, default Class 0 power level is provided.

![A document icon with a folded top-right corner and horizontal lines, featuring a large red checkmark superimposed over it.](.pcie-gie7x-50-11177-2020-31/da710ead76793cc0a0f86be2389881d12b98b9dafe6e82795fe359ffb757fd00.jpg)
NOTE:

Due to inherent cable resistance, voltage drops along the length of the cable result in power loss to the remote PD. For example, although the PCIe-GIE7x, upon detection of a Class 3 device, provides up to 15.4W of power, on a full 100m cable, a maximum of only 12.95W will be available to the remote PD.

<table><tr><td>Power Class</td><td>0</td><td>1</td><td>2</td><td>3</td><td>4</td></tr><tr><td>PSE Power over PoE</td><td>15.4W</td><td>4.0W</td><td>7.0W</td><td>15.4W</td><td>N/A</td></tr><tr><td>PSE Power over PoE+</td><td>15.4W</td><td>4.0W</td><td>7.0W</td><td>15.4W</td><td>30.0W</td></tr></table>

Table 1-5: Available Power per PoE Class

# PoE Port Priority

PoE port priority, as shown, is fixed. Available power is diverted to the priority ports if insufficient power is available to all PoE ports.

<table><tr><td></td><td>Priority</td></tr><tr><td>Port 1</td><td>1</td></tr><tr><td>Port 2</td><td>2</td></tr><tr><td>Port 3</td><td>3</td></tr><tr><td>Port 4</td><td>4</td></tr></table>

Table 1-6: PoE Port Priority

# PoE Power Budget

The PCIe-GIE7x Series automatically manages power budget according to power source (PCIe or 4/6 pin Molex connector). When budget is exceeded, PoE power is interrupted to prevent damage to the PCIe-GIE7x and connected devices.

<table><tr><td>PoE Power Source</td><td>PCIe slot</td><td>4-pin 12V connector</td><td>6-pin 12V connector</td><td>4-pin 12V connector/6-pin 12V connector</td></tr><tr><td>Budget</td><td>20W</td><td>61.6W</td><td>61.6W</td><td>120W (PCIe-GIE74 PRO only)</td></tr></table>

Table 1-7: PoE Power Budget

# Power Management SDK and Utility

The ADLINK Power Management SDK and Utility are standard and ready to use with the PCIe-GIE7x Series, with no additional licensing required. Applications are easily created with the SDK, requiring only a few lines of code. The Power Management Utility is an interactive Windows application for PoE configuration and status monitoring.

# 1.6 ToE (Trigger over Ethernet) with GigE Vision Action Command

The PCIe-GIE7x PRO provides firmware-based ToE with Action Command, which, as defined in the latest GigE Vision standard, enables triggering of one or multiple cameras in sync through a single broadcast packet via Ethernet cable, with no additional I/O connection required. Accordingly, cameras can be triggered via existing Ethernet sytems, realizing single cable solutions with data, power (PoE), and trigger (ToE) capabilities.

# 1.6.1 About Firmware-based ToE

ToE with Action Command transmits specific key data from the PCIe-GIE7x PRO to the connected camera in the GigE Vision network. When a rising or falling edge of external trigger signal id detected, firmware sends the pre-configured action command to the GigE Vision camera, where, once the key data is correlated, pre-defined actions are initiated. Time gaps between detection of the external trigger signal by firmware and actual transmission of the action command is a constant latency with no variation or jitter.

# 1.6.2 ToE with Action Command Settings

One action command can be pre-defined for each channel of the PCIe-GIE7x PRO, with two corresponding actions normally able to be pre-defined in the GigE Vision camera. Each action can be used to trigger Acquisition Start, Acquisition Stop, Frame Start, Transfer Start, or Reset of Timestamp. Reset of Timestamp and other elements may be executed differently depending on camera manufacturer.

The action command content (on the PCIe-GIE7x PRO firmware) can be configured easily with ADLINK's Smart GigE Tool and SDK. Action command messages perform as follows.

<table><tr><td>ActionDeviceKey</td><td>Allows the GigE Vision camera to ascertain the validity of action commands</td></tr><tr><td>ActionGroupKey</td><td>Each GigE Vision camera can be assigned to exactly one group with all grouped cameras performing action at the same time</td></tr><tr><td>ActionGroupMask</td><td>Serves as a filter specifying the cameras in a group that responds to a specific Action Command</td></tr></table>

# Table 1-8: Action Command Messages

For each channel, the ActionDeviceKey, ActionGroupKey, and ActionGroupMask settings on the PCIe-GIE7x PRO must correspond to those on the connected camera, with only valid key data sent by PCIe-GIE7x PRO able to trigger the event.

# 1.7 Software License Management

The PCIe-GIE7x PRO provides cost-effective software license protection, integrated in a SHA256-based security EEPROM, eliminating the need for secure license dongles or additional hardware. With ADLINK's Smart GigE SDK, software providers and application producers can set up pay-per-use and provide the option of purchasing only specifically needed features and capabilities. PCIe-GIE7x PRO’s Software License Management allows software vendors to reduce revenue loss from piracy and protect valuable intellectual property.

# 1.8 Layout, I/O and Indicators

![The image displays a simple graphic icon featuring a piece of white paper with horizontal lines running across it, resembling a document or notepad. The top-left corner of the paper is folded down (a 'dog-ear'). Superimposed over the center of the paper is a large, bold red checkmark.](.pcie-gie7x-50-11177-2020-31/d81c9471efdcba2ecf05eca35fcbb7a43fffd8af12b628954ad6330fbd71eee1.jpg)
NOTE:

All dimensions shown are in mm

# 1.8.1 PCIe-GIE74/PCIe-GIE74 PRO

![167.65\n25\n111.15\n106.65\n44\n98.4](.pcie-gie7x-50-11177-2020-31/ace277cb06e7259184400512091afdacbde44c3851bb35fecfb1deac667bfe69.jpg)

Figure 1-1: PCIe-GIE74/PCIe-GIE74 PRO PCB Top Layout

![Pure electrical circuit lines without any symbols](.pcie-gie7x-50-11177-2020-31/0ec54d52bdf6a2b6b75020f7ab1eeb68c5b94fd47b16aae0e8c9574b4f86629d.jpg)

Figure 1-2: PCIe-GIE74/PCIe-GIE74 PRO PCB Underside Layout

<table><tr><td>A</td><td>POE switch (SW3)</td></tr><tr><td>B</td><td>4-pin 12V connector</td></tr><tr><td>C</td><td>6-pin 12V connector</td></tr><tr><td>D</td><td>Card ID switch (SW1)</td></tr><tr><td>E</td><td>RJ45 connectors x2</td></tr><tr><td>F</td><td>POE LED</td></tr><tr><td>G</td><td>Trigger In connector</td></tr><tr><td>H</td><td>Temperature sensor</td></tr></table>

Table 1-9: PCIe-GIE74/PCIe-GIE74 PRO PCB Layout Legend

![Pure schematic line drawing of industrial equipment layout without any text, numbers, or symbols](.pcie-gie7x-50-11177-2020-31/832a1280d38bf221317f25f3a7f21e0178637d49ed311c1967efce2c351ab4fd.jpg)

Figure 1-3: PCIe-GIE74/PCIe-GIE74 PRO Side View

![The image displays two vertical columns of technical line drawings representing hardware components, likely server blades or expansion cards.\n\n**Left Column:**\n*   **Top Section:** A rectangular module with small connectors on the left edge. Below it is a section containing four small squares.\n*   **Middle Section:** Two rectangular modules stacked vertically. Each module contains two square-like components with internal details.\n*   **Bottom Section:** Two rectangular modules stacked vertically, appearing identical to the middle section modules.\n*   **Far Right Edge:** A vertical strip with notches along the edge, resembling an edge connector.\n\n**Right Column:**\n*   **Top Section:** A rectangular module featuring four circular ports arranged vertically and a small rectangular shape to the left.\n*   **Middle Section:** A rectangular module containing a grid of six squares arranged in two columns of three.\n*   **Bottom Section:** A large rectangular module or plate with a long vertical line running down the center.\n*   **Far Right Edge:** A vertical strip with notches along the edge, resembling an edge connector.](.pcie-gie7x-50-11177-2020-31/4631fa1ca1894f94e0254e0a91bbf5d2cf096e6f26fe9336374039f6640e4aed.jpg)
Figure 1-4: PCIe-GIE74/PCIe-GIE74 PRO I/O

# 1.8.2 PCIe-GIE72/PCIe-GIE72 PRO

![167.65\n25\n111.15\n106.65\n44\n98.4](.pcie-gie7x-50-11177-2020-31/956a71e729ea1abef4b05ff852adec21f78a58129ec4dfd5bc7e5b055aad1d38.jpg)

Figure 1-5: PCIe-GIE72/PCIe-GIE72 PRO PCB Top Layout

![Diagram of an electronic circuit board layout with labeled components and connections](.pcie-gie7x-50-11177-2020-31/e3bfddc66aad8d8d52f859d593b12a360e247ad82453dcfe5be013180c257ddf.jpg)

Figure 1-6: PCIe-GIE72/PCIe-GIE72 PRO PCB Underside Layout

<table><tr><td>A</td><td>Trigger In connector</td></tr><tr><td>B</td><td>4-pin 12V connector</td></tr><tr><td>C</td><td>POE switch (SW3)</td></tr><tr><td>D</td><td>Card ID switch (SW1)</td></tr><tr><td>E</td><td>RJ45 connector</td></tr><tr><td>F</td><td>POE LED</td></tr><tr><td>G</td><td>Temperature sensor</td></tr></table>

Table 1-10: PCIe-GIE72/PCIe-GIE72 PRO PCB Layout Legend

![Pure schematic diagram of a mechanical or electrical component with no text, numbers, or symbols](.pcie-gie7x-50-11177-2020-31/e9c0d242ca94aaca22c29df37255df45de3ad7b63ad5d8d08515d096337fb9a6.jpg)

Figure 1-7: PCIe-GIE72/PCIe-GIE72 PRO Side View

![Technical line drawing of two mechanical or electrical components with internal compartments and connectors (no text or symbols)](.pcie-gie7x-50-11177-2020-31/e03725f39a7aa7ab69e5dd0cc273badcb6ac2298a077a0038c3ddd1744ff824d.jpg)

Figure 1-8: PCIe-GIE72/PCIe-GIE72 PRO I/O

# 1.8.3 RJ-45 Ethernet Port

![LED1\nLED2\n8\n1](.pcie-gie7x-50-11177-2020-31/714d9986a7dbac91eda592a565e2644c3312e6c96b8fac3eab315ab8ddfc794e.jpg)

Figure 1-9: RJ-45 Ethernet Connector

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>MDI0+ (PoE_DCV+)</td></tr><tr><td>2</td><td>MDI0- (PoE_DCV+)</td></tr><tr><td>3</td><td>MDI1+ (PoE_DCV-)</td></tr><tr><td>4</td><td>MDI2+ (PoE_DCV+)</td></tr><tr><td>5</td><td>MDI2- (PoE_DCV+)</td></tr><tr><td>6</td><td>MDI1- (PoE_DCV-)</td></tr><tr><td>7</td><td>MDI3+ (PoE_DCV-)</td></tr><tr><td>8</td><td>MDI3- (PoE_DCV-)</td></tr></table>

Table 1-11: RJ-45 Ethernet Port Connector Signals

<table><tr><td></td><td>Activity</td><td>Status</td></tr><tr><td rowspan="3">LED110/100/1000</td><td>Off</td><td>10 Mbps</td></tr><tr><td>Green</td><td>100Mpbs</td></tr><tr><td>Yellow</td><td>1000Mbps</td></tr><tr><td rowspan="3">LED2ACT/LINK</td><td>Off</td><td>No link</td></tr><tr><td>Green</td><td>Linked</td></tr><tr><td>Flashing green</td><td>Data activity</td></tr></table>

Table 1-12: RJ-45 Ethernet Port LED Indicators

# 1.8.4 PoE Status LEDs

![Port4\nPort3\nPort2\nPort1](.pcie-gie7x-50-11177-2020-31/a172820a3452a9736168c8a954bf2df77f0467f9cff6803f8ab4493b2a0b261e.jpg)

Figure 1-10: Status LEDs

Four yellow LEDs, when lit, indicate PoE activity for the respectively labeled port.

# 1.8.5 4 Pin 12V Power Connector (CN3)

![4\n3\n2\n1](.pcie-gie7x-50-11177-2020-31/7ca0c5862355580fb81bff4210898612e4980779ec6a0325a86a913a52c0e11f.jpg)

Figure 1-11: 4 Pin 12V Power Connector

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>+12V</td></tr><tr><td>2</td><td>GND</td></tr><tr><td>3</td><td>GND</td></tr><tr><td>4</td><td>+5</td></tr></table>

Table 1-13: 4 Pin 12V Power Connector Pin Assignment

# 1.8.6 6 Pin 12V Power Connector (CN4)

![6 5 4\n3 2 1](.pcie-gie7x-50-11177-2020-31/3d402b48c09d6caa8124e40fd4c0eca0f6810694311aeb78b9c681acf2a50938.jpg)

Figure 1-12: 6 Pin 12V Power Connector

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>+12V</td><td>4</td><td>GND</td></tr><tr><td>2</td><td>+12V</td><td>5</td><td>Sense</td></tr><tr><td>3</td><td>+12V</td><td>6</td><td>GND</td></tr></table>

Table 1-14: 6 Pin 12V Power Connector Pin Assignment

# 1.8.7 Card ID Switch (SW1)

Card ID default setting is 15 (0x1111).

![ON\nDIP\n1 2 3 4](.pcie-gie7x-50-11177-2020-31/7302682b4a67a41f05cc18107e7adad8065040b718a00ea6a0b9e874ff50114a.jpg)

Figure 1-13: Card ID Switch

<table><tr><td></td><td>Definition</td></tr><tr><td>ON</td><td>1 (Default)</td></tr><tr><td>OFF</td><td>0</td></tr></table>

Table 1-15: Card ID Switch Settings

<table><tr><td>Card ID</td><td>1</td><td>2</td><td>3</td><td>4</td></tr><tr><td>0</td><td>OFF</td><td>OFF</td><td>OFF</td><td>OFF</td></tr><tr><td>1</td><td>ON</td><td>OFF</td><td>OFF</td><td>OFF</td></tr><tr><td>2</td><td>OFF</td><td>ON</td><td>OFF</td><td>OFF</td></tr><tr><td>3</td><td>ON</td><td>ON</td><td>OFF</td><td>OFF</td></tr><tr><td>4</td><td>OFF</td><td>OFF</td><td>ON</td><td>OFF</td></tr><tr><td>5</td><td>ON</td><td>OFF</td><td>ON</td><td>OFF</td></tr><tr><td>6</td><td>OFF</td><td>ON</td><td>ON</td><td>OFF</td></tr><tr><td>7</td><td>ON</td><td>ON</td><td>ON</td><td>OFF</td></tr><tr><td>8</td><td>OFF</td><td>OFF</td><td>OFF</td><td>ON</td></tr><tr><td>9</td><td>ON</td><td>OFF</td><td>OFF</td><td>ON</td></tr><tr><td>10</td><td>OFF</td><td>ON</td><td>OFF</td><td>ON</td></tr><tr><td>11</td><td>ON</td><td>ON</td><td>OFF</td><td>ON</td></tr><tr><td>12</td><td>OFF</td><td>OFF</td><td>ON</td><td>ON</td></tr><tr><td>13</td><td>ON</td><td>OFF</td><td>ON</td><td>ON</td></tr><tr><td>14</td><td>OFF</td><td>ON</td><td>ON</td><td>ON</td></tr><tr><td>15</td><td>ON</td><td>ON</td><td>ON</td><td>ON</td></tr></table>

Table 1-16: Card ID Switch Legend

# 1.8.8 PoE Switch (SW3)

![ON\n1 2](.pcie-gie7x-50-11177-2020-31/d186bf06b76cb318c2cdf612e8a0ef694895a05a0ecce45002e752eb1d93cb59.jpg)

Figure 1-14: PoE Switch

<table><tr><td>Bit</td><td colspan="2">Definition</td></tr><tr><td rowspan="2">1</td><td rowspan="2">PoE HW Switch</td><td>Switch ON: PoE Disable</td></tr><tr><td>Switch OFF: PoE Enable (Default)</td></tr><tr><td rowspan="2">2</td><td rowspan="2">PoE Initial State</td><td>Switch ON: PoE OFF @ Power On</td></tr><tr><td>Switch OFF: PoE ON @ Power On (Default)</td></tr></table>

Table 1-17: PoE Switch Settings

# 1.8.9 Onboard LED Status Indicators

9 LEDs on the front side of the PCIe-GIE7x indicate data stream for each port, as follows.

![4 1\n2 6 3\n7435572200\nDS402\n7435572200\nDS402\nMEF3\nMEF3\nMEF3\nMEF3\nMEF3\nMEF3\nMEF3\nMEF3\nMEF3\nMEF3\nMEF3\nMEF3\nMEF3\nMEF3\nMEF3\nMEF3\nMEF3\nMEF3\nMEF3\nMEF3\nMEF3\nMEF3\nMEF3\nMEF3\nMEF3\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF2\nMEF2\nMEF2\nMEF2\nMEF2\nMEF2\nMEF2\nMEF2\nMEF2\nMEF2\nMEF2\nMEF2\nMEF2\nMEF2\nMEF2\nMEF2\nMEF2\nMEF2\nMEF2\nMEF2\nMEF2\nMEF2\nMEF2\nMEF2\nMEF2\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1\nMEF1](.pcie-gie7x-50-11177-2020-31/01c0b8d1e76dcf31c83e07c4e8ae0b54bf0efdc4c1f5171c04f36092327b5746.jpg)

Figure 1-15: Onboard LED Indicators

<table><tr><td>LED</td><td>Activity</td><td>Status</td></tr><tr><td rowspan="2">1/2/3/4</td><td>OFF</td><td>Abnormal;PCIe switch downstream function is disabled</td></tr><tr><td>Flashing (default)</td><td>Normal</td></tr><tr><td rowspan="3">5/6/7/8</td><td>OFF</td><td>Abnormal;PCIe switch upstream function is disabled.</td></tr><tr><td>ON</td><td>PCIe x4 Gen 2</td></tr><tr><td>Flashing (default)</td><td>PCIe x4 Gen 1</td></tr><tr><td rowspan="2">9</td><td>OFF (default)</td><td>Normal</td></tr><tr><td>ON</td><td>Abnormal;PCIe switch has experienced an unexpected error</td></tr></table>

Table 1-18: Onboard LED Indicators Legend

![The image shows a yellow triangular warning sign with a black border and a large black exclamation point in the center. Below the triangle, the text 'CAUTION:' is printed in black capital letters.](.pcie-gie7x-50-11177-2020-31/03d8c64ad775501a1fa5f678aa838133788c1e82fe05ed90ff194e065b0fa077.jpg)

Abnormal LED behavior may be the result of board damage, in which case contact your distributor or agent.

# 1.8.10 Onboard Trigger-in Connector (CN6)

![CN6\n1\n2\nDI1 3\n4\nDI2 5\n6\nDI3 7\n8\nDI4 9\n10\nBH_10_R2.0](.pcie-gie7x-50-11177-2020-31/b63a5283528cf46bbb1a9552a61ad993ac2d9f34fea8453226e0e15cbdd81552.jpg)

Figure 1-16: Onboard Trigger-in Connector

<table><tr><td>Pin</td><td>Definition</td></tr><tr><td>1</td><td>COM_I (Isolated COM)</td></tr><tr><td>2</td><td>Line1</td></tr><tr><td>3</td><td>Line2</td></tr><tr><td>4</td><td>Line3</td></tr><tr><td>5</td><td>Line4</td></tr><tr><td>6</td><td>COM_I (Isolated COM)</td></tr><tr><td>7</td><td>COM_I (Isolated COM)</td></tr><tr><td>8</td><td>COM_I (Isolated COM)</td></tr><tr><td>9</td><td>COM_I (Isolated COM)</td></tr><tr><td>10</td><td>COM_I (Isolated COM)</td></tr></table>

Table 1-19: Onboard Trigger-in Connector Pin Assignment

# 1.8.11 I/O Bracket Trigger Connector

PCIe-GIE72/4 PRO optional accessory.

![5\n1\n9\n6](.pcie-gie7x-50-11177-2020-31/3ae2d08cdbb5b955aca1203cfdc81cf180acf8e1aad5b38e7dff5cf92d0d03dc.jpg)

Figure 1-17: I/O Bracket Trigger Connector

<table><tr><td>Pin</td><td>Definition</td></tr><tr><td>1</td><td>COM_I (Isolated COM)</td></tr><tr><td>2</td><td>Line1</td></tr><tr><td>3</td><td>Line2</td></tr><tr><td>4</td><td>Line3</td></tr><tr><td>5</td><td>Line4</td></tr><tr><td>6</td><td>COM_I (Isolated COM)</td></tr><tr><td>7</td><td>COM_I (Isolated COM)</td></tr><tr><td>8</td><td>COM_I (Isolated COM)</td></tr><tr><td>9</td><td>COM_I (Isolated COM)</td></tr><tr><td>10</td><td>N/A</td></tr></table>

Table 1-20: I/O Bracket Trigger Connector Pin Assignment

# 2 Getting Started

# 2.1 Unpacking Checklist

Before unpacking, check the shipping carton for any damage. If the shipping carton and/or contents are damaged, inform your dealer immediately. Retain the shipping carton and packing materials for inspection. Obtain authorization from your dealer before returning any product to ADLINK. Ensure that the following items are included in the package.

X PCIe-GIE7x unit (PCIe-GIE72, PCIe-GIE72 PRO, PCIe-GIE74 or PCIe-GIE74 PRO)
X Quick Start Guide

![The image displays a white rectangular document icon with faint horizontal lines and a black border. A large red checkmark is drawn diagonally across the center. The top-left corner of the document is curled upwards.](.pcie-gie7x-50-11177-2020-31/c930482be130f3199d5170a05dc9195aa9b268cae473dcbfb0f98630d2eb2c54.jpg)
NOTE:

OEM versions with non-standard configuration, functionality, or packaging may vary according to individual requirements.

# 2.2 Installation

1. Remove the computer cover according to the computer manual.

![The image displays a graphic icon of a white document with a folded top-right corner and faint gray horizontal lines representing text. A large, thick red checkmark is centered over the document.](.pcie-gie7x-50-11177-2020-31/08d5bd0a3f25a6704a49ecabe929891d9db84b3ac8d93f88725edc9d2423fb57.jpg)
NOTE:

A vacant PCI express slot is required for installation of the PCIe-GIE7x Series module; if none is available, remove a PCI express board and note the slot number.

2. Remove the slot cover (if any).
3. Carefully position the PCIe-GIE7x in the selected PCI express slot. If installing in a tower computer, align the board with the board slots.
4. Press the board firmly but carefully into the connector.
5. Anchor the board with the screw.
6. Plug the cable into the PoE power connector.
7. Connect the device via a Gigabit Ethernet connector.

# 8. Power up the computer.

![The image displays a white document icon featuring a folded upper-right corner. Faint grey horizontal lines run across the lower portion of the page. A large, thick red checkmark is drawn diagonally across the center, extending from the bottom left to the top right.](.pcie-gie7x-50-11177-2020-31/44a61864607a696cb08f660a2fdbfee139bac59dbe9965151998d96ee52d2797.jpg)
NOTE:

The PCIe-GIE7x can be installed in a PCI Express x4, x8, or x16 slot. Please download the Intel® I210 driver from ADLINK (www.adlinktech.com) or Intel (downloadcenter.intel.com)

# Important Safety Instructions

For user safety, please read and follow all instructions, Warnings, Cautions, and Notes marked in this manual and on the associated device before handling/operating the device, to avoid injury or damage.

S'il vous plaît prêter attention stricte à tous les avertissements et mises en garde figurant sur l'appareil , pour éviter des blessures ou des dommages.

X Read these safety instructions carefully
X Keep the User’s Manual for future reference
X Read the Specifications section of this manual for detailed information on the recommended operating environment
X The device can be operated at an ambient temperature of 50ºC
When installing/mounting or uninstalling/removing device; or when removal of a chassis cover is required for user servicing (See “Getting Started” on page 27.):

Z Turn off power and unplug any power cords/cables
Z Reinstall all chassis covers before restoring power

X To avoid electrical shock and/or damage to device:

Z Keep device away from water or liquid sources
Z Keep device away from high heat or humidity
Z Keep device properly ventilated (do not block or cover ventilation openings)
Z Always use recommended voltage and power source settings
Z Always install and operate device near an easily accessible electrical outlet
Z Secure the power cord (do not place any object on/over the power cord)
Z Only install/attach and operate device on stable surfaces and/or recommended mountings

If the device will not be used for long periods of time, turn off and unplug from its power source

Never attempt to repair the device, which should only be serviced by qualified technical personnel using suitable tools
X A Lithium-type battery may be provided for uninterrupted backup or emergency power.

![The image displays a yellow triangular warning sign with a black border and a large black exclamation point in the center. Below the triangle, the text 'CAUTION:' is printed in black capital letters.](.pcie-gie7x-50-11177-2020-31/bf99ccc9293b28f2de69ecf5350f80355e2cde011d8d0f0224bb019ed4d93cec.jpg)

Risk of explosion if battery is replaced with one of an incorrect type; please dispose of used batteries appropriately.

Risque d’explosion si la pile est remplacée par une autre de type incorrect. Veuillez jeter les piles usagées de façon appropriée.

X The device must be serviced by authorized technicians when:

Z The power cord or plug is damaged
Z Liquid has entered the device interior
Z The device has been exposed to high humidity and/or moisture
Z The device is not functioning or does not function according to the User’s Manual
Z The device has been dropped and/or damaged and/or shows obvious signs of breakage

Disconnect the power supply cord before loosening the thumbscrews and always fasten the thumbscrews with a screwdriver before starting the system up

X It is recommended that the device be installed only in a server room or computer room where access is:

Z Restricted to qualified service personnel or users familiar with restrictions applied to the location, reasons therefor, and any precautions required

Z Only afforded by the use of a tool or lock and key, or other means of security, and controlled by the authority responsible for the location

If PoE (Power over Ethernet) is enabled for the device, the system can ONLY be deployed indoors. Unless otherwise noted, the PoE system is NOT designed to withstand the rigors of outdoor use.

![Yellow triangular warning sign with black smoke symbol indicating hot weather](.pcie-gie7x-50-11177-2020-31/fc8ff99d16a0f5a0c6178d40fc69c1fce3c9c36de13c0bed1c619b42f8390574.jpg)

# BURN HAZARD

Touching this surface could result in bodily injury. To reduce risk, allow the surface to cool before touching.

# RISQUE DE BRÛLURES

Ne touchez pas cette surface, cela pourrait entraîner des blessures.

Pour éviter tout danger, laissez la surface refroidir avant de la toucher.

This page intentionally left blank.

# Getting Service

Ask an Expert: http://askanexpert.adlinktech.com

# ADLINK Technology, Inc.

9F, No.166 Jian Yi Road, Zhonghe District

New Taipei City 235, Taiwan

Tel: +886-2-8226-5877

Fax: +886-2-8226-5717

Email: service@adlinktech.com

# AmPRO ADLINK Technology, Inc.

5215 Hellyer Avenue, #110

San Jose, CA 95138, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

+1-408-360-0222

Email: info@adlinktech.com

# ADLINK Technology (China) Co., Ltd.

300 Fang Chun Rd., Zhangjiang Hi-Tech Park

Pudong New Area, Shanghai, 201203 China

Tel: +86-21-5132-8988

Fax: +86-21-5132-3588

Email: market@adlinktech.com

# ADLINK Technology GmbH

Hans-Thoma-Strasse 11

D-68163 Mannheim, Germany

Tel: +49-621-43214-0

Fax: +49-621 43214-30

Email: emea@adlinktech.com

Please visit the Contact page at www.adlinktech.com for information on how to contact the ADLINK regional office nearest you:
[🔗 Link to the original document](.pcie-gie7x-50-11177-2020-31/pcie-gie7x-50-11177-2020-31.pdf)