# PXES-2314T

# Compact 4-slot Thunderbolt™ 3

# PXI Express Chassis

![Front view of a white AOLINK 3000/4000 wireless equipment unit with labeled ports and connectors (no readable text beyond branding)](.pxes-2314t-50-1z315-1000-10/3b7bdd6dea58473797656ae5d9dec3b80025d2dff947eae77944f9d4e6fdce43.jpg)

Manual Rev.: Rev. 1.0

Revision Date: November 3, 2020

Part No: 50-1Z315-1000

Revision History

<table><tr><td>Revision</td><td>Release Date</td><td>Description of Change(s)</td></tr><tr><td>1.0</td><td>2020-11-03</td><td>Initial release</td></tr></table>

# Preface

# Copyright © 2020 ADLINK Technology, Inc.

This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

# Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.

![Symbol of a trash bin crossed with a diagonal line and a horizontal bar below (no text or labels)](.pxes-2314t-50-1z315-1000-10/f8e90fdb3ea0ef44b9b3cb3b9d27b928088ee7637a830672899a418b167c36ef.jpg)

Battery Labels (for products with battery)
![Symbol of a trash bin crossed out by two diagonal lines (no text or numbers present)](.pxes-2314t-50-1z315-1000-10/b53d85c38764fcb846df62241ec5881b3949c45702cc867e93b2661a8867ebfa.jpg)

![Recycling symbol icon with three chasing arrows inside a square frame (no text or labels)](.pxes-2314t-50-1z315-1000-10/4ea7a05ffe3f5bccd659693b9e2856a77769c917f1b4837e27e6bdeae09277c5.jpg)

Li-ion

![RECYCLE\nRBRC\nLi-ion\n1.800.822.8837](.pxes-2314t-50-1z315-1000-10/aebb8e5d543684cf4236731bf39dc8a81ca1802238222ceabe179b5aa3bc7c60.jpg)

![Abstract geometric pattern with interlocking X and Y shapes (no text or symbols)](.pxes-2314t-50-1z315-1000-10/fc426782e2b757994f668dcf39029b619cdf24a385d73b898686d8ef6f9f0138.jpg)

廢電池請回收

# California Proposition 65 Warning

![The image displays a yellow triangular warning sign with a thick black border. Inside the triangle, centered, is a black exclamation point.](.pxes-2314t-50-1z315-1000-10/93c2c831534256cee157eb5b00a4429abf1638cf2192aea3aec85a2fef91ee08.jpg)

WARNING: This product can expose you to chemicals including acrylamide, arsenic, benzene, cadmium, Tris(1,3-dichloro-2-propyl)phosphate (TDCPP), 1,4-Dioxane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and vinyl materials, which are known to the State of California to cause cancer, and acrylamide, benzene, cadmium, lead, mercury, phthalates, toluene, DEHP, DIDP, DnHP, DBP, BBP, PVC, and vinyl materials, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

# Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

# Conventions

Take note of the following conventions used throughout this manual to make sure that users perform certain tasks and instructions properly.

![This is an icon depicting a white document with a folded top-left corner and faint horizontal lines representing text. A large red checkmark is overlaid diagonally across the center of the paper.](.pxes-2314t-50-1z315-1000-10/f4aa0f9d9307c9b259d0c2bf4767e33618972d5653009faf887d6afaae94c2b5.jpg)
NOTE:

Additional information, aids, and tips that help users perform tasks.

![The image displays a standard warning symbol consisting of a yellow equilateral triangle with a thick black border. Centered inside the triangle is a large, black exclamation point. The top of the triangle is positioned just below a thin horizontal black line.](.pxes-2314t-50-1z315-1000-10/716584681f75357d0e1e65d3be9c16121c08c2dcf898af57ca21324b3ec42d5b.jpg)
CAUTION:

Information to prevent minor physical injury, component damage, data loss, and/or program corruption when trying to complete a task.

![The image displays a red triangular warning sign with a thin white border. Inside the triangle is a gradient of red that is darker at the bottom, featuring a white exclamation point centered in the middle. The sign is framed by white horizontal bars at the very top and bottom.](.pxes-2314t-50-1z315-1000-10/08a421255dca39113a6084976fd0f3faeb9591d3a6d14d4ad7b912b5023df373.jpg)
WARNING

Information to prevent serious physical injury, component damage, data loss, and/or program corruption when trying to complete a specific task.

# Table of Contents

# Revision History...... ii

# Preface...... iii

# List of Figures ...... vii

# List of Tables ix

# 1 Introduction ...... 1

1.1 Features.... 1
1.2 Specifications.... 2
1.3 Connectors, I/O and Controls 14

1.3.1 Front Panel 14
1.3.2 Rear Panel.... 17
1.3.3 Positions of Backplane Thermal Sensors.... 17
1.3.4 PCI Express.... 18

# 2 Getting Started 23

2.1 Package Contents 23
2.2 Power Supply Budget Considerations 24
2.3 Cooling Considerations.... 24
2.4 Configure Settings for Cooling.... 24
2.5 Installation.... 25

2.5.1 Operation - Power on sequence 26
2.5.2 Operation - Power off sequence 27

2.6 PXES-2314T Software Resources 28

2.6.1 ADLINK PXI Platform Services (APPS)...... 28
2.6.2 MAPS Core....28

# 3 System Management & Configuration 29

3.1 ChassisWatch 30

3.1.1 Chassis Status Monitor.... 30

3.1.2 Smart Fan 31

# A Appendix: Maintenance....33

A.1 Installation Problems.... 33
A.2 FAQ 33
A.3 Basic Troubleshooting 36
A.4 Maintenance 37

A.4.1 Handling the Chassis....37

A.4.2 Cleaning the Exterior 37

A.4.3 Power Requirements 37

# Important Safety Instructions.... 39

# Getting Service 41

# List of Figures

Figure 1-1: Backplane PCI Express Bus Topology....5

Figure 1-2: Top View....8

Figure 1-3: Left View....9

Figure 1-4: Front View 9

Figure 1-5: RightView 10

Figure 1-6: Rear View 10

Figure 1-7: Bottom View ...... 11

Figure 1-8: PXES-2314T Front Panel 14

Figure 1-9: PXES-2314T Rear Panel....17

Figure 1-10: PXES-2314T Backplane Thermal Sensor Positions... 17

Figure 1-11: 3U PXI Express Peripheral Module....19

Figure 1-12: 3U Hybrid Slot Compatible PXI-1 Peripheral Module . 20

Figure 1-13: Trigger Bus and Bus Bridges....21

Figure 3-1: Chassis ChassisWatch Utility 30

Figure 3-2: Target Temperature Parameters 31

This page intentionally left blank.

# List of Tables

Table 1-1: DC Power Output Specifications .... 3

Table 1-2: Backplane Slot DC Power Current 3

Table 1-3: PXI 10 MHz Reference Clock....3

Table 1-4: PXI Express 100 MHz System Reference Clock....4

Table 1-5: Backplane Slots & Functionality 5

Table 1-6: Operating Temperature 6

Table 1-7: Cooling 7

Table 1-8: Mechanical Dimensions and Weight......8

Table 1-9: PXI Express Slot Pin Definitions....12

Table 1-10: Environmental Specifications.... 13

Table 1-11: Front Panel Power & Status 16

Table 1-12: Front Panel Indicators.... 16

Table 3-1: Target Temperature Parameters Legend ...... 32

This page intentionally left blank.

# 1 Introduction

The ADLINK PXES-2314T is a compact 4-slots PXI Express chassis equipped with high-performance PXI Express backplane and Thunderbolt 3 ports for uplink to a host PC or notebook computer. The chassis' modular design ensures easy maintenance and a high level of flexibility for a variety of applications using PXI systems. The PXES-2314T chassis fully complies with the PXI™-5 PXI Express Hardware Specification, offering advanced timing and synchronization features of PXI Express instrumentation signals.

Utilizing Thunderbolt 3 and PCI Express 3.0 technology, the PXES-2314T features 40Gbps bidirectional bandwidth (maximum 22Gbps bidirectional data bandwidth) for high-throughput data transfer applications.

The PXES-2314T offers USB Power Delivery functionality through Thunderbolt 3 ports, supporting up to 60W power supply for connected Thunderbolt 3/USB PD compatible devices such as a notebook computer, flash drive, or other storage device. The maximum power supply capability of the chassis is 160W total, with 58W of power cooling capacity per slot and a smart system monitoring controller for chassis status including fan speed, system voltages, and internal temperature.

# 1.1 Features

▶ Dual Thunderbolt™ 3 ports for host PC connection
▶ Thunderbolt™ 3 daisy chain
▶ Thunderbolt™ 3 bidirectional data bandwidth transfers up to 40 Gb/s.
▶ USB Power Delivery up to 60W
▶ Four PXI Express Hybrid slots
▶ Programmable Trigger I/O port
▶ Smart fan and chassis status monitoring

# 1.2 Specifications

- PXI-5 PXI Express hardware specification Rev.1.0 compliant
▶ Dual Thunderbolt™ 3 ports (USB Type-C connectors, support USB PD 5V, 9V, 15V and 20V up to 60W/15W and daisy-chain capability)
▶ Thunderbolt™ 3 bidirectional data bandwidth transfers up to 40 Gb/s.
▶ 1 Trigger I/O port programmable from/to backplane PXI Trigger Bus
▶ Smart fan & temperature, voltage, fan monitor
▶ Backplane PXI Signals
▷ PXI 10MHz sync signals
▷ PXIe 100MHz sync signals
▷ PXI Trigger Bus
▷ Local Bus(PXI\_LBL6 and PXI\_LBR6)
▶ DC Power Output up to 160W (combined total of slots 2/3/4/5 and USB power delivery)
▶ Wide range DC 9 to 32V input, up to 160W
▶ Dimensions: 207.9 x 148.4 x 220.5mm (8.19" x 5.84" x 8.68")

# DC Power Input

Rated Input 9-32 VDC

DC Power output

<table><tr><td colspan="3">Operation Ambient Temperature</td><td colspan="2">Maximum Total DC Output</td></tr><tr><td colspan="3">0°C to 50°C (32°F to 122°F)</td><td colspan="2">160W (DC input 16V-32V)120W (DC input 9-12V)</td></tr><tr><td>Voltage Rail</td><td>Maximum Total Current</td><td colspan="2">Load Regulation</td><td>Maximum Ripple Noise</td></tr><tr><td>+12V</td><td>15A</td><td colspan="2">±5%</td><td>120mV</td></tr><tr><td>+3.3V</td><td>12A</td><td colspan="2">±5%</td><td>50mV</td></tr><tr><td>+5V</td><td>12A</td><td colspan="2">±5%</td><td>50mV</td></tr><tr><td>-12V</td><td>1A</td><td colspan="2">±5%</td><td>120mV</td></tr><tr><td>+5Vaux</td><td>1A</td><td colspan="2">±5%</td><td>50mV</td></tr></table>

Table 1-1: DC Power Output Specifications

Backplane Slot DC Power Current Capacity

<table><tr><td>Slot Type</td><td>Slot Number</td><td>+5V</td><td>+3.3V</td><td>+12V</td><td>-12V</td><td>+5Vaux</td></tr><tr><td>PXle Hybrid Peripheral Slot</td><td>2/3/4/5</td><td>6A</td><td>9A</td><td>6A</td><td>1A</td><td>1A</td></tr></table>

Table 1-2: Backplane Slot DC Power Current

PXI 10 MHz System Reference Clock (PXI\_CLK10)

<table><tr><td>Item</td><td>Detail</td></tr><tr><td>Maximum slot-to-slot skew</td><td>280 ps</td></tr><tr><td>Accuracy</td><td>±1 ppm max, 0°C to 55°C (32°F to 131°F)</td></tr><tr><td>Maximum jitter</td><td>0.44 ps RMS phase-jitter (12k Hz–20 MHz)</td></tr><tr><td>Duty-factor for PXI_CLK10</td><td>45% to 55%</td></tr><tr><td>Unloaded signal swing</td><td>3.3V ± 5% (±0.165V)</td></tr></table>

Table 1-3: PXI 10 MHz Reference Clock

PXle 100 MHz System Reference Clock (PXle\_CLK100)

<table><tr><td>Item</td><td>Description</td></tr><tr><td>Maximum slot-to-slot skew</td><td>100 ps</td></tr><tr><td>Accuracy</td><td>±1 ppm max, 0°C to 55°C (32°F to 131°F)</td></tr><tr><td>Maximum jitter</td><td>2.41 ps RMS phase-jitter (12kHz–20MHz)</td></tr><tr><td>Duty-factor for PXIe_CLK100</td><td>45% to 55%</td></tr><tr><td>Absolute differential voltage (when terminated with a 50Ω load to 1.30 V or Thévenin equivalent)</td><td>400 to 900 mV</td></tr><tr><td>PXIe_SYNC100</td><td>Implemented as default behavior.PXIe_SYNC_CTRL is disabled by connecting a 10kΩ pull-down resistor to ground.</td></tr></table>

Table 1-4: PXI Express 100 MHz System Reference Clock

Backplane Slots & Functionality

<table><tr><td>Type of Slot</td><td>Qty</td><td>Slot Number</td><td>Bus</td></tr><tr><td>PXI Express Hybrid Peripheral Slot</td><td>4</td><td>2,3,4,5</td><td>Slots 2 and 3 support PCIe x1 Gen2 link, and PCI 32-bit (33MHz 5VIO). Slots 4 and 5 support PCIe x4 Gen3 link, and PCI 32-bit (33MHz 5VIO).</td></tr></table>

Table 1-5: Backplane Slots & Functionality

Backplane PCI Express Bus Topology
![Flowchart](.pxes-2314t-50-1z315-1000-10/fc5ed9cb81971da365207a70af1fbbc42ee2aa7fdea9434f46f73060091e6254.jpg)

Figure 1-1: Backplane PCI Express Bus Topology

# Operating Temperature

<table><tr><td>Peripheral Module Power Consumption</td><td>Operating Temperature</td><td>Environment</td></tr><tr><td>When all installed peripheral modules require less than 38W cooling capacity.</td><td>0°C to 50°C (32°F to 122°F)</td><td rowspan="2">Indoor use only</td></tr><tr><td>When any peripheral module requires more than 38W and less than 58W cooling capacity.</td><td>0°C to 40°C (32°F to 104°F)</td></tr></table>

Table 1-6: Operating Temperature

![The image displays a graphic icon of a white document with a folded upper-right corner. Faint grey horizontal lines run across the lower portion of the page, suggesting text. A large, bold red checkmark is superimposed over the left side of the document.](.pxes-2314t-50-1z315-1000-10/3b689d5ebdf02202549c26a617b0b4f429d264c088142bb435e9d0b9712f478e.jpg)
NOTE:

To optimize cooling, optional Wind Block Modules must be installed on all unpopulated slots.

# Cooling

<table><tr><td>Item</td><td>Detail</td></tr><tr><td>Chassis Rear Fans (for peripheral modules)</td><td>Forced air circulation through one 136 CFM fan</td></tr><tr><td>Module slot airflow direction</td><td>From bottom to top of module</td></tr><tr><td>Module airflow intake</td><td>Left side of chassis (when facing chassis)</td></tr><tr><td>Module airflow exhaust</td><td>Right side of chassis (when facing chassis)</td></tr><tr><td>Peripheral Module Slot cooling capacity</td><td>Maximum 58W per slot</td></tr><tr><td>Minimum chassis cooling clearances</td><td>Both sides of chassis: 101.60 mm (4.00 in.)</td></tr></table>

Table 1-7: Cooling

![The image displays a yellow triangular warning sign with a black border and a black exclamation point in the center. Directly below the triangle is the text 'CAUTION:' printed in black capital letters.](.pxes-2314t-50-1z315-1000-10/7b27d2cd6bd6778e0bac9ea1bc2ca49deb050578be2c97f03f53fe50f44e2c3c.jpg)

Place chassis horizontally and do not block ventilation holes. Ensure sufficient cooling clearance on both sides of chassis.

# Mechanical Dimensions and Weight

<table><tr><td>Item</td><td>Detail</td></tr><tr><td>Height</td><td>148.4mm / 5.84&quot;</td></tr><tr><td>Width</td><td>207.9mm / 8.19&quot;</td></tr><tr><td>Depth</td><td>220.5 mm / 8.68&quot;</td></tr><tr><td>Net Weight</td><td>3.8KG, 8.38 lbs</td></tr><tr><td>Gross Weight(with package, power cable, and filler panels)</td><td>5.5KG, 12.13 lbs</td></tr></table>

Table 1-8: Mechanical Dimensions and Weight

(All dimensions in millimeters)
![Pure architectural line drawing of a rectangular frame with corner supports and no text or symbols](.pxes-2314t-50-1z315-1000-10/ef55ea022a866d0f817f914f68da409929e58b1c1731bebf75fe1d93ccdce68c.jpg)

Figure 1-2: Top View

![220.50\n235.20](.pxes-2314t-50-1z315-1000-10/91c426ccc0b6a6ce08d917d5dc2e0eb9f6bd3e0876ba8ef5c1b280e4af3e598f.jpg)

Figure 1-3: Left View

![ADLINK\nTECHNOLOGY INC.\n207.90\n200.40\n142.40\n148.40\nTemp Pan Power PAN TBI\n1kW 6kW V- + V+\nOCP High Auto\nPXI](.pxes-2314t-50-1z315-1000-10/a700eed64443f804e9be6720882e03497bca3cd84ddbdea75ce5e1abd7dc1202.jpg)

Figure 1-4: Front View

![Technical line drawing of a hexagonal grid panel mounted on a rectangular base (no text or symbols)](.pxes-2314t-50-1z315-1000-10/302f76ab573ef200bf3db9426609c082562beaae6459c99a5222b61fbba43a35.jpg)

Figure 1-5: RightView

![Technical line drawing of a rectangular enclosure with six vertical slots and a small gear icon at the base (no text or symbols)](.pxes-2314t-50-1z315-1000-10/00e22103e718a4d06ac95e4a13aca8e423e04e90e18a5a6e3c8ee714578111e1.jpg)

Figure 1-6: Rear View

![2-164\n18.20\n2-179.80](.pxes-2314t-50-1z315-1000-10/6cb7ad034cf96a57dae9ff8344591b96dd71d6f6723dc22100bf37013be579ec.jpg)

Figure 1-7: Bottom View

# Pin Definitions

<table><tr><td>Slot Type</td><td>Pin Definition</td></tr><tr><td>PXI Express Hybrid Peripheral Slot</td><td>Comply with PXISA PXI-5 Hardware Specification: PXI Express Hybrid Peripheral Slot Pin Assignments</td></tr></table>

Table 1-9: PXI Express Slot Pin Definitions

# Software and Utilities

The PXES-2314T complies with PXI-6 PXI Express Software Specification Revision 1.2. Related software resources are available in following software packages.

# ADLINK PXI Software Service

A software package that provides PXI-2/PXI-6/PXI-9 software services, drivers, sample programs, and utilities for ADLINK PXI Express/PXI system modules and chassis. Please refer to the ADLINK PXI Platform Service user manual for more information.

# Measurement Automation and Platform Service (MAPS)

A software package including ADLINK DAQ drivers and ADLINK PXI Software Service. Please refer to the MAPS user manual for more information.

Environmental Specifications

<table><tr><td>Item</td><td>Detail</td></tr><tr><td>Storage</td><td>Ambient temperature: -40°C to 71°C (-40°F to 159.8°F)Relative humidity: 10 to 90%, noncondensing</td></tr><tr><td>Operating</td><td>Ambient temperature: 0°C to 50°C (32°F to 122°F)Relative humidity10 to 90%, noncondensing</td></tr><tr><td>Functional shock</td><td>30 G, half-sine, 11 ms pulse duration</td></tr><tr><td>Random Vibration</td><td>Operating: 5 to 500 Hz, 0.3 Grms, 3 axesNonoperating: 5 to 500 Hz, 2.46 Grms, 3 axes</td></tr><tr><td>Fan Speed*</td><td>Acoustic Emissions</td></tr><tr><td>Auto</td><td>35.7 dB</td></tr><tr><td>High</td><td>52.8 dB</td></tr></table>

\*Fan Mode and Fan Speed are set by switches at the front of the chassis.

Table 1-10: Environmental Specifications

# Electromagnetic Compatibility

▶ EN 61326-1 (IEC 61326-1): Class B emissions; Basic immunity
▶ EN 55011 (CISPR 11): Group 1, Class B emissions
▶ FCC 47 CFR Part 15 Subpart A (Class B)
▶ ICES-001 Class B
▶ ICES-003 Issue 6-2016
▶ AS/NZS CISPR 11: Group 1, Class B emissions

# 1.3 Connectors, I/O and Controls

# 1.3.1 Front Panel

![ADLINK\nTECHNOLOGY INC.\n2'\n3'\n4'\n5'\nPXI\nTemp Fan Power FAN TRIG 15W 60W V- +\nHigh Auto\n9-32V DC IN\nA B C D E F G](.pxes-2314t-50-1z315-1000-10/faa0dcdbcf94dffbced311a37c6c6dc5f77ceb0e05deb54e74dd560c74ccdb4d.jpg)

Figure 1-8: PXES-2314T Front Panel

Front Panel Power & Status

<table><tr><td>Item</td><td>Feature</td><td>Description</td></tr><tr><td>A</td><td>Power Button</td><td>Powers the chassis on/off. In order to avoid abnormal disconnection, the power button is locked when host PC is connected and powered on. Power off host PC and disconnect Thunderbolt 3 connection to unlock power button. There is a reserved 2-pin power button connector located on the bottom side of the PXES-2314T, inside a cover. It can be used to connect an external power button or circuit for remote power on/off operation.</td></tr><tr><td>B</td><td>Chassis Status</td><td>Temperature, Fan, Power</td></tr><tr><td>C</td><td>Fan Speed Switch</td><td>High: Disables Smart Fan function. Sets fan speeds of rear 3 fans to max. RPM.Auto: Enables Smart Fan function. Auto fan speed based on temperature detected by thermal sensors of PXES-2314T.</td></tr><tr><td>D</td><td>PXI Trigger I/O</td><td>The PXI trigger connector is an SMB jack, used to route external trigger signals to or from the PXI backplane. Trigger signals are TTL-compatible and edge sensitive. There are four trigger routing modes from/to the PXI trigger connector to synchronize PXI modules, includingFrom a selected trigger bus line to PXI trigger connectorFrom the PXI trigger connector to a selected trigger bus lineFrom software trigger to a selected trigger bus lineFrom software trigger to PXI trigger connector All trigger modes are programmable by the provided driver.&lt;img src="images/ee3ece9ca6fa8347b4687faf40e11dbf2c4b230870c9631d43f15725202f88f5.jpg"/&gt;</td></tr></table>

<table><tr><td>Item</td><td>Feature</td><td>Description</td></tr><tr><td>E</td><td>Thunderbolt 3 Port</td><td>Thunderbolt 3 compliant with USB power 5V up to 15W</td></tr><tr><td>F</td><td>Thunderbolt 3 Port</td><td>Thunderbolt 3 compliant with USB PD 5V, 9V, 15V and 20V up to 60W</td></tr><tr><td>G</td><td>DC Input</td><td>Wide range 9-32V DC input, maximum 160W. Number of positions: 3, pitch: 5.08 mmReference connector models:DECA MC311#50803Phoenix Contact FRONT-MSTB 2,5/3-STF-5,08 - 1777811</td></tr></table>

Table 1-11: Front Panel Power & Status

![A white document icon with a folded top-left corner and faint horizontal lines, featuring a large red checkmark in the center.](.pxes-2314t-50-1z315-1000-10/1486c5bdacf878d77b354a0e64204a31788ee139ff6c27c95bd023a7f0265b87.jpg)
NOTE:

Power button is disabled when Thunderbolt 3 port is connected to a power-on host PC. Power button function restores when host-PC is power-off or Thunderbolt 3 ports are unconnected.

Chassis Status LEDs

<table><tr><td>Status</td><td>Temperature</td><td>Fan</td><td>Power</td></tr><tr><td>On</td><td>N/A</td><td>Normal operation</td><td>Normal operation</td></tr><tr><td>Off (when power button LED is on)</td><td>Normal operation</td><td>N/A</td><td>N/A</td></tr><tr><td>Blinking</td><td>One or more temperature sensors exceeds threshold temperature (default 70°C)</td><td>One or more fans falls below threshold speed (default is 800RPM)</td><td>One or more power rails exceeds threshold settings (defaults are ±5% for 5V, 3.3V, +12V, and -12V)</td></tr></table>

Table 1-12: Front Panel Indicators

# 1.3.2 Rear Panel

![Ground Stud\nCable Tie Anchors](.pxes-2314t-50-1z315-1000-10/5bbcf9f14bfa923dc95d255b8c995c39e760ad1866b1226dc8d173cb49fb81c1.jpg)

Figure 1-9: PXES-2314T Rear Panel

# 1.3.3 Positions of Backplane Thermal Sensors

Positions of thermal sensors.

![Thermal sensor 1\nThermal sensor 2\nThermal sensor 3](.pxes-2314t-50-1z315-1000-10/68831e051992db1ca9f5c9efd9a30c70540a804271b534b63212c44e0492ad45.jpg)

Figure 1-10: PXES-2314T Backplane Thermal Sensor Positions
![The image displays a digital icon of a white document featuring a folded top-right corner and faint horizontal lines, overlaid with a large red checkmark.](.pxes-2314t-50-1z315-1000-10/e90d424c6e3006b1282da7a6725e7a2a5bacd361663ba6537afdc43d50c1dd7b.jpg)
NOTE:

For details about chassis temperature detection, please see "Chassis Status Monitor" on page 30.

# 1.3.4 PCI Express

# PCI Express Link Capability

The PXES-2314T backplane provides a PCIe Gen3 switch fabric, allowing PCI Express bus data streams between the Thunderbolt 3 ports and all peripheral slots.

![The image displays a graphic icon of a document. It features a white page with a folded upper-left corner and faint horizontal lines running across the lower portion. A large, red checkmark is prominently displayed diagonally over the center of the document.](.pxes-2314t-50-1z315-1000-10/1c91c955a6ec076ab2f1a99535cbe104e83a40cee29ae0cae50798ab19889047.jpg)
NOTE:

Connector pin assignments of the PXI Express Hybrid Peripheral Slots, comply with the default pin assignments as defined in PXI-5 PXI Express hardware specification Rev.1.1.

# PXI Express Hybrid Peripheral Slots

Four PXI Express hybrid peripheral slots are provided on the PXES-2314T. Slots 2 and 3 are connected by a PCIe Gen2 x1 link. Slots 4 and 5 are connected by a PCIe Gen3 x4 link. All slots share the same PCIe uplink to the host PCIe controller via Thunderbolt 3 port. Each slot can accommodate either a 3U PXI Express module(Figure 1-11), a CompactPCI Express module, a hybrid slot compatible PXI-1 module (Figure 1-12), or a Compact-PCI peripheral module.

![XJ4\nXJ3](.pxes-2314t-50-1z315-1000-10/f3ab6dba729ad77c05f127fb9faa6b26b7abae8208f50325032acb5dd61877fc.jpg)

Figure 1-11: 3U PXI Express Peripheral Module

![XJ4\nJ1](.pxes-2314t-50-1z315-1000-10/fb9cc72b1260f933f2ee248d6044d8ef818333e9908d938cefcd9ec578b1b2c8.jpg)

Figure 1-12: 3U Hybrid Slot Compatible PXI-1 Peripheral Module

# Local Bus

The local bus on a PXI backplane is a daisy-chained bus that connects each peripheral slot with adjacent peripheral slots to the left and right. The quantity of local bus lines is decreased from thirteen to one (PXI\_LBL6 and PXI\_LBR6) on a PXI Express backplane. The remaining local bus lines can transmit analog or digital signals between modules.

# Trigger Bus

There is one trigger bus segment on the PXES-2314T backplane with each trigger bus segment containing 8 trigger lines connecting all slots on the same segment, providing inter-module synchronization. PXI and PXI Express modules can exchange trigger or clock signals through the trigger bus, allowing precisely timed response to asynchronous external events.

![2 H\n3 H\n4 H\n5 H\nPXI Trigger Bus Segment 1\nPXI_TRIG(0:7)](.pxes-2314t-50-1z315-1000-10/0b2cdd4480cc40aad214290ab7dae9e75cbe9c369c98366849d7386ed69f96e1.jpg)

Figure 1-13: Trigger Bus and Bus Bridges

# Reference Clock

The PXES-2314T backplane supplies a single-ended 10MHz reference clock (PXI\_CLK10) and differential 100MHz clock (PXle\_CLK100) to each peripheral slot for inter-module synchronization. The independent buffers drive the clock signal to each peripheral slot.

These common reference clock signals can synchronize multiple modules in a PXI Express chassis. PXI modules with phase-lock loop circuits can lock reference clocks to generate an in-phase timebase.

The PXI\_CLK10 and PXIe\_CLK100 clocks are in-phase according to the PXI-5 specification.

# 2 Getting Started

This chapter describes procedures for installing the PXES-2314T and making preparations for its operation. Please contact ADLINK or authorized dealer if there are any problems during the installation.

![A white document icon with a folded top-right corner and horizontal lines features a large red checkmark overlaid on its left side.](.pxes-2314t-50-1z315-1000-10/8a8551d9dd77866cf79fbf4a4f7e18c94301df9980c3a028eb0febc4f2f2a9cd.jpg)
NOTE:

Diagrams and illustrated equipment are for reference only. Actual system configuration and specifications may vary.

# 2.1 Package Contents

Before unpacking, check the shipping carton for any damage. If the shipping carton and/or contents are damaged, inform your dealer immediately. Retain the shipping carton and packing materials for inspection. Obtain authorization from your dealer before returning any product to ADLINK.

Please ensure that the following items are included in the package.

▶ PXES-2314T chassis
▶ DC input connector DECA MC311#50803

The following accessories are available in the PXES-2314T Kit (ordered separately).

▶ Thunderbolt 3 certified cable (0.7m)
▶ 160W AC-DC power adapter
▶ Power cord (for US/EU, China, or AU/NZ areas)
▶ Cable ties

If any of these items are missing or damaged, contact the dealer from whom you purchased the product. Save the shipping materials and carton in case you want to ship or store the product in the future.

![A red-to-black gradient triangle featuring a white exclamation mark in the center sits above the word 'WARNING' in black capital letters.](.pxes-2314t-50-1z315-1000-10/c4e513862cae8979c4ae0d45864168107510e5a7879004d8603568f95b6a9130.jpg)

Do not install or apply power to equipment that is damaged or missing components. Retain the shipping carton and packing materials for inspection. Please contact your ADLINK dealer/vendor immediately for assistance and obtain authorization before returning any product.

# 2.2 Power Supply Budget Considerations

Please review the power consumption of all modules and devices connected to the Thunderbolt 3 ports on the PXES-2314T (e.g. notebook, USB devices). The total maximum consumed power shall not exceed 80% of the rated power output of the DC power supply connected to the PXES-2314T.

# 2.3 Cooling Considerations

Place the chassis horizontally when in use. Minimum chassis cooling clearances are both sides of chassis is 101.60 mm (4.00 in.). The airflow direction is from left to right (as viewed facing the front of the chassis).

![The image displays a digital icon featuring a white document with horizontal gray lines, resembling a piece of paper or a checklist. Superimposed over the document is a large, bold red checkmark, indicating completion or approval. The top right corner of the paper is folded down.](.pxes-2314t-50-1z315-1000-10/0c81bcb02580d276e478e1bf506d6c0067e25fcacac1c4b87e2feac2a5e93b2e.jpg)
NOTE:

To maintain required air flow, always install filler panels on all unpopulated slots. For optimized cooling, install optional Wind Block Modules in all unpopulated slots.

# 2.4 Configure Settings for Cooling

Heat ventilation is related to the installation location, environmental temperature, and total heat generated by peripheral modules. The PXES-2314T features a smart fan function to provide sufficient ventilation and minimize noise emission. There is a fan speed switch located on the front of the chassis to configure the smart fan operation settings to "enabled" (Auto) or "maximum fan speed" (High).

# 2.5 Installation

1. Install the PXIe/PXI peripheral modules into the PXES-2314T.
2. Follow the "Operation - Power on sequence" below.
3. Download and install the required drivers for each installed peripheral modules on the host PC/notebook.
4. Download ADLINK PXI Platform Services from the PXES-2314T product web page. Install the software package on the host PC/notebook by running setup.exe and following the on screen instructions.
5. Follow the "Operation - Power off sequence" below.
6. Attach the front handles can be set with a Philips screw driver.

![Two views of a white rack-mounted computer with ventilation fan and internal components, showing hands installing or adjusting the rack (no visible text or labels)](.pxes-2314t-50-1z315-1000-10/b59c2605a5a3bb47d92343a3c8be01363b784649629dabe8566970e007d3a1b9.jpg)

7. Attach accessories such as the AC-DC power adapter using the included cable ties to the rear side of the chassis as shown.

![Exterior view of a rectangular electronic device with a green connector and black body, no visible text or symbols](.pxes-2314t-50-1z315-1000-10/409c478af103321e82b3a91ff5b5fb90dc2945d4674f5dd2adb166bbd345cb35.jpg)

# 2.5.1 Operation - Power on sequence

1. Connect the PXES-2314T to a host PC/notebook using a Thunderbolt 3 cable (the PXES-2314T 60W port supports USB Power Delivery for charging).
2. Connect Thunderbolt 3 peripheral devices to the other port of the PXES-2314T if required.
3. Connect the AC-DC power adapter.
4. Power on the PXES-2314T by pressing the power button on the front panel.
5. Power on the host PC/notebook and boot into Windows 10.
6. Launch Thunderbolt utility of host PC/notebook. Set PXES-2314T as a valid device to always connect.

![The image displays a digital icon of a white document with a folded top-right corner. Faint gray horizontal lines run across the page, and a large red checkmark is superimposed diagonally over the center.](.pxes-2314t-50-1z315-1000-10/07ea87e93cfeaf6032d427c63b821eaaa6409d0c61e4352485d19be00963af05.jpg)
NOTE:

In order to make sure essential system and OS resource are reserved for Thunderbolt controllers, the PXES-2314T must be the first device connected to the Thunderbolt 3 port of the host PC.

![A triangular warning sign with a black border and a red gradient background, featuring a white exclamation point in the center.](.pxes-2314t-50-1z315-1000-10/9531b8b3677d3ab5e003e571e87f0acee4087eb92228faab637108d776d84ef5.jpg)
WARNING

Do not hot swap, replace, disconnect or connect any components (including cards and cabling) on chassis while the system is powered up. Doing so may result in system damage and/or data loss, and physical injury (due to possible shock hazard).

# 2.5.2 Operation - Power off sequence

1. Power off the host PC/notebook.
2. Disconnect the Thunderbolt 3 cable from the PXES-2314T and the host PC/notebook.
3. Press the power button on the PXES-2314T front panel to power off the chassis.

![The image displays a yellow triangular warning sign with a thick black border. Centered inside the triangle is a large black exclamation point. Directly below the triangle, the text 'CAUTION:' appears in black capital letters.](.pxes-2314t-50-1z315-1000-10/ed0c53d508640d81ff5ff241eaf230d5634a4ae89abb3f2ee9f4af9a5d12e0b0.jpg)

Not following the correct power on and power off sequences may result in events that cannot be properly handled by the host PC/notebook, BIOS, operating system, and/or installed drivers. These unexpected events may cause abnormalities such as unexpected functionality or OS kernel crash (BSOD). It is highly recommend to follow the power on and power off sequences described above to prevent abnormal system behavior.

# 2.6 PXES-2314T Software Resources

The following software resources are available for various application requirements.

# 2.6.1 ADLINK PXI Platform Services (APPS)

ADLINK PXI Platform Services is a software kit consisting of a utility and a group of software services and drivers.

# ▶ ADLINK ChassisWatch

A GUI application utility providing chassis status monitoring and configuration functions that are exclusive for ADLINK PXI Express chassis (PXES-2314T, PXES-2785, PXES-2780, PXES-2590, PXES-2301).

# ▶ PXI Express Chassis Software Services

API services and drivers for the PXES-2314T defined in the PXISA PXI-6 Software Specification.

# ▶ PXI Resource Manager

A Windows background service following the PXI-2 and PXI-6 Software Specification to scan PXI/PXIe controllers, chassis, and peripheral modules. PXI Resource Manager also generate PXI system description files accordingly.

# ▶ PXI Trigger Management Software Services

API services and Trigger Manager defined in PXISA PXI-9 PXI and PXI Express Trigger Management Specification.

Please refer to the ADLINK PXI Platform Services user manual for more information.

# 2.6.2 MAPS Core

ADLINK's MAPS Core (Measurement Automation and Platform Services) software package includes ADLINK DAQ drivers, device management utility (ACE), and PXI configuration settings utility. Please refer to the MAPS Core user manual for more information.

# 3 System Management & Configuration

The PXES-2314T chassis provides advanced system monitoring and controlling. Chassis conditions, including internal temperature, fan speed, and DC voltage can all be monitored via ADLINK ChassisWatch — a Windows based utility for ADLINK PXIe chassis monitoring and configuration.

Communication with the chassis monitoring control unit is available by using the ChassisWatch utility running on the host PC/ notebook connected via the Thunderbolt 3 port.

# 3.1 ChassisWatch

The PXES-2314T chassis provides advanced system monitoring and controlling via the ADLINK ChassisWatch utility. Related functions such as status monitoring, configurable PXI trigger bus bridges, and Smart Fan are introduced in the following sections. For more information about ChassisWatch, please refer to the ADLINK PXI Platform Services user manual.

![ChassisWatch Ver 3.2\nSelected Chassis\nChassis ID 1: PXES-2314T\nTemp Unit\nCelsius\nRefresh\nStatus Refresh Rate\n1 sec\nChassis Status\nAC-DC PSU\nAC(V): -\nAC(A): -\nAC(W): -\nT1(℃): -\nT2(℃): -\nT3(℃): -\nF1(RPM): -\nF2(RPM): -\nDC Voltage (V)\n5Vsb: 5.078\n3.3V: 3.277\n5V: 5.070\n12V: 12.022\n-12V: -12.176\nFan Speed (RPM)\nF1: 1103\nF2: -\nF3: -\nSpeed Mode:\nAUTO\nVentilation Mode:\n-\nTemperature (℃)\nT1: 26.8\nT2: 26.7\nT3: 26.8\nT4: -\nT5: -\nT6: -\nT7: -\nT8: -\nTrigger Bus\nPXIe Link Routing\nFan Control\nAlarm Thresholds\nNetwork\nLog\nVersion Info\nNetwork\nIP Address : -\nNetmask : -\nIP GateWay : -\nMAC Address : -\nRef CLK PXI_CLK10\nClock Source: On Board\nLock Status: N/A\nCount=26 Log Status](.pxes-2314t-50-1z315-1000-10/245ebfd32dee495d7c64c28d4688ab0eccae0702b05e75ea7d0b1cb3171592e4.jpg)

Figure 3-1: Chassis ChassisWatch Utility

# 3.1.1 Chassis Status Monitor

Chassis conditions, including internal temperature, fan speed, and DC voltage can all be monitored by ChassisWatch.

# 3.1.2 Smart Fan

When the fan switch on the rear panel is set to AUTO, fans run at different speeds based on the measured temperature.

Target Temperature indicates the temperature at which fans run at 100%. Using the default $50^{\circ}$ C as an example, fans run at 40% when all temperature readings are less than $25^{\circ}$ C, and begin ramp-up when any reading exceeds $25^{\circ}$ C.

Fans run at 100% speed if any temperature reading exceeds $50^{\circ}$ C (e.g., Target Temperature).

Setting parameters are as shown.

![| Highest temperature (°C) | Fan voltage duty cycle (%) |\n| ------------------------ | --------------------------- |\n| 0                        | 40                          |\n| 70                       | 100                         |](.pxes-2314t-50-1z315-1000-10/6e916902852277021a06d68c65cf3fa003cade882b44ddaee27d5c6eef1d3a08.jpg)

Figure 3-2: Target Temperature Parameters

<table><tr><td>Mark</td><td>Temperature</td><td>Event</td></tr><tr><td>A</td><td>0°C / 32°F</td><td>Lowest chassis temperature at which fan speeds commence ramping up for final 25° temperature mark (see E)</td></tr><tr><td>B</td><td>45°C / 113°F</td><td>Highest chassis temperature at which fan speeds commence ramping up for final 70° temperature mark (see C)</td></tr><tr><td>C</td><td>70°C / 158°F</td><td>Highest chassis temperature at which fan speeds reach maximum speed</td></tr><tr><td>D</td><td>25°C to 70°C / 77°F to 158°F (temperature range)</td><td>Range over which maximum chassis temperature (at which fan speeds reach maximum speed) can be set</td></tr><tr><td>E</td><td>25°C / 77°F</td><td>Lowest chassis temperature at which fan speeds reach maximum speed</td></tr></table>

Table 3-1: Target Temperature Parameters Legend

# Appendix A - Maintenance

This Appendix describes basic maintenance and troubleshooting instructions for the PXES-2314T chassis.

# A.1 Installation Problems

Inability to start the system frequently results from incorrect installation of the peripheral modules, and other components. Before starting the system, please ensure that:

The host PC/notebook is properly connected via a certific- cated Thunderbolt 3 cable.
▶ All peripheral modules are properly seated on the slots.
▶ All cables are properly connected to the system controller and peripheral modules.
▶ All installed peripheral modules are compatible for use in the chassis.
The power cord is securely plugged into the chassis power connector and power outlet/wall socket/power strip.

If the system fails to start when all installation conditions are met, remove all installed peripheral modules and try again. If the system starts normally, install one peripheral module at a time followed by powering up. You may also try installing the modules into different slots until the desired result is obtained.

# A.2 FAQ

Q: What devices are required for setting up a completed PXI Express system using the PXES-2314T?

A:•A PC or notebook (minimum one Thunderbolt 3 port and Windows 10).

• A PXES-2314T with peripheral modules required for desired application.

• A DC input connector (in-box accessory, DECA MC311#50803).

\- A certificated Thunderbolt 3 cable (kit accessory, Type-C).

\- An AC-DC power adapter or DC power source (kit accessory). 24V DC, 160W recommended.

Q: Where can I find a Thunderbolt 3 host PC/notebook and cables?

A: A list of Thunderbolt 3 PCs/notebooks/cables can be found in Thunderbolt 3 official website:

https://thunderbolttechnology.net/products

![Two electronic components: a black connector with a lightning bolt symbol and a black USB plug with a warning symbol (no text or labels visible)](.pxes-2314t-50-1z315-1000-10/d09451f09504b2837862ea8e3eeb033f2a43c048fb2037fbced8cb7658d1e89d.jpg)

Q: How do I identify a Thunderbolt 3 port on a PC/notebook? How do I identify a certified Thunderbolt 3 cable?

A: The Thunderbolt 3 logo can be used to identify certified Thunderbolt 3 ports and cables.

Q: Can I use generic USB Type-C cables with a Thunderbolt 3 connection on the PXES-2314T?

A: No, generic USB Type-C cables are not compatible with Thunderbolt 3 high speed protocols. Thunderbolt 3 certified cables listed on the Thunderbolt 3 official website are required for Thunderbolt 3 connections between host PC/ notebook and the PXES-2314T.

Q: Instead of the standard power on/off procedure used with generic PXIe chassis, can I hot-plug to the Thunderbolt 3 port on the PXES-2314T?

A: Such operation is not recommended. When one of the drivers (e.g. for installed PXI peripheral modules) or BIOS on the host PC/notebook does not support hot-plugging or dynamic resource allocation is not handled properly in Windows 10, the driver may cause a resource conflict that cause a system freeze or crash of the Windows kernel (BSOD). Please follow the power on and power off sequences described above to prevent abnormal system behavior.

Q: Can existing PXIe/PXI/cPCI peripheral modules and drivers be used with a Thunderbolt 3 PXIe chassis such as the PXES-2314T? Are there any required modifications?

A: The existing drivers based on PCI/PCI Express software framework are natively supported by Thunderbolt 3 host PCs and PXIe chassis. However, when any installed peripheral module driver does not support hot-plugging, especially any peripheral modules using legacy IO address system resources, please use the standard power on/off procedures described in the Installation section.

Q: How to identify the cause of a Windows BSOD?

A: This can happen easily when hot-plugging a Thunderbolt 3 connection when any driver installed on the host PC does not support dynamic resource allocation properly.

Steps for technical troubleshooting:

1) Configure the Windows 10 BSOD dump file settings.
2) Reproduce the BSOD issue to generate the BSOD dump file
3) Analyze the dump file with WinDbg tools in the Windows SDK.
4) Find the driver or procedure that triggered the BSOD.

![The image displays a white document icon featuring a folded top-right corner and faint horizontal grey lines. A large, bold red checkmark is superimposed over the document, slanting upwards from the bottom left to the top right.](.pxes-2314t-50-1z315-1000-10/e68f6528d819a0f25a99fac15587f06250f65b1a3195ff0134986d80339a37bf.jpg)
NOTE:

The results found here may be not the actual root cause, and may only indicate the point where Windows BSOD occurred. The root cause could be something else. Troubleshooting to identify and determine the actual root cause depends on conditions. Please refer to this Microsoft article: Blue Screen Data - Windows drivers | Microsoft Docs.
https://docs.microsoft.com/en-us/windows-hardware/drivers/debugger/blue-screen-data

# A.3 Basic Troubleshooting

<table><tr><td>Problem</td><td>Ensure that:</td></tr><tr><td>System fails to power up</td><td>► The power cord is securely plugged into the chassis power connector and wall socket/power strip► The wall socket/power strip is live► The power button on the chassis front panel is activated</td></tr><tr><td>When system is powered on, it does not power off after pressing the power button.</td><td>► To avoid abnormal disconnection, the power button is locked when the host PC is connected and the system is powered on. Power off the host PC and disconnect Thunderbolt 3 connection to unlock the power button.</td></tr><tr><td>Power LED (blue) is blinking</td><td>► There is no short circuit by removing all PXI modules (PXI controller and peripheral modules)► Over threshold event of voltage is triggered.If the signal persists, contact your dealer for further assistance</td></tr><tr><td>Fan LED (green) is blinking</td><td>► The fan is unobstructed► Over threshold event of fan speed is triggered.If the signal persists, contact your dealer for further assistance.</td></tr><tr><td>Temperature LED (amber) is blinking</td><td>▸ Airflow from the outlet apertures is unobstructed and steady; if not, ensure that adequate clearance for the intake apertures is provided▸ Over threshold event of temperature is triggered.If the temperature of exhausted air is normal ( $70^{\circ}C$  is the default threshold setting) but the temperature LED is still blinking, contact your dealer for further assistance.</td></tr></table>

# A.4 Maintenance

# A.4.1 Handling the Chassis

The PXES-2314T is designed for bench top use. When transporting or carrying the chassis, it is recommended that the handle be used, being designed to support the weight of the chassis for superior portability and balance.

The PXES-2314T weights 3.6 kg (7.9 pounds). Please be careful when moving the chassis to avoid any possible injury.

# A.4.2 Cleaning the Exterior

Make sure that the system is turned off before cleaning the chassis exterior. Wipe the exterior with a clean cloth starting from areas that easily accumulate dust or dirt such as the area in and around the chassis air intake apertures.

# A.4.3 Power Requirements

Make sure that the power cord and DC power input connector are in good condition before plugging it into the system. It is important to check the reliability of the power source. The PXES-2314T power supply is capable of delivering 9 to 32V DC. Do not connect the PXES-2314T to an already overloaded circuit.

This page intentionally left blank.

# Important Safety Instructions

For user safety, please read and follow all instructions, Warnings, Cautions, and Notes marked in this manual and on the associated device before handling/operating the device, to avoid injury or damage.

S'il vous plaît prêter attention stricte à tous les avertissements et mises en garde figurant sur l'appareil, pour éviter des blessures ou des dommages.

▶ Read these safety instructions carefully.
- Keep the User’s Manual for future reference.
▶ Read the Specifications section of this manual for detailed information on the recommended operating environment.
The device can be operated at an ambient temperature of $55^{\circ}$ C.

\- When installing/mounting or uninstalling/removing device, or when removal of a chassis cover is required for user servicing (See “Getting Started” on page 23.):

▷ Turn off power and unplug any power cords/cables.
▷ Reinstall all chassis covers before restoring power.

▶ To avoid electrical shock and/or damage to device:

▷ Keep device away from water or liquid sources.
▷ Keep device away from high heat or humidity.
▷ Keep device properly ventilated (do not block or cover ventilation openings).

▶ Always use recommended voltage and power source settings.

▶ Always install and operate device near an easily accessible electrical outlet.

▷ Secure the power cord (do not place any object on/over the power cord).

▷ Only install/attach and operate device on stable surfaces and/or recommended mountings.

▶ If the device will not be used for long periods of time, turn off and unplug it from its power source

▶ Never attempt to repair the device, which should only be serviced by qualified technical personnel using suitable tools

▶ A Lithium-type battery may be provided for uninterrupted backup or emergency power.

![A yellow triangular warning sign with a black border contains a large black exclamation point in the center. Below the triangle, the text 'CAUTION:' is printed in black capital letters.](.pxes-2314t-50-1z315-1000-10/5353035f7a7592e912a879054e16bab9a2ecef69a512e463957302d998285b63.jpg)

Risk of explosion if battery is replaced with one of an incorrect type; please dispose of used batteries appropriately.

Risque d'explosion si la pile est remplacée par une autre de type incorrect. Veuillez jeter les piles usagées de façon appropriée.

▶ The device must be serviced by authorized technicians when:

▷ The power cord or plug is damaged.
▷ Liquid has entered the device interior.
The device has been exposed to high humidity and/or moisture.
The device is not functioning or does not function according to the User's Manual.
The device has been dropped and/or damaged and/or shows obvious signs of breakage.

▶ Disconnect the power supply cord before loosening the thumbscrews and always fasten the thumbscrews with a screwdriver before starting the system up.

It is recommended that the device be installed only in a server room or computer room where access is:

▶ Restricted to qualified service personnel or users familiar with restrictions applied to the location, reasons therefor, and any precautions required.

▶ Only afforded by the use of a tool or lock and key, or other means of security, and controlled by the authority responsible for the location.

<table><tr><td>&lt;img src="images/d66696f04de938d23de5592d1d70c70e96c7068844a217d47d548a0e5a549195.jpg"/&gt;</td><td>BURN HAZARDTouching this surface could result in bodily injury.To reduce risk, allow the surface to cool before touching.RISQUE DE BRÛLURESNe touchez pas cette surface, cela pourrait entraîner des blessures.Pour éviter tout danger, laissez la surface refroidir avant de la toucher.</td></tr></table>

# Getting Service

Ask an Expert: http://askanexpert.adlinktech.com

# ADLINK Technology, Inc.

9F, No.166 Jian Yi Road, Zhonghe District

New Taipei City 235, Taiwan

Tel: +886-2-8226-5877

Fax: +886-2-8226-5717

Email: service@adlinktech.com

# Ampro ADLINK Technology, Inc.

5215 Hellyer Avenue, #110

San Jose, CA 95138, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

Fax: +1-408-360-0222

Email: info@adlinktech.com

# ADLINK Technology (China) Co., Ltd.

300 Fang Chun Rd., Zhangjiang Hi-Tech Park

Pudong New Area, Shanghai, 201203 China

Tel: +86-21-5132-8988

Fax: +86-21-5132-3588

Email: market@adlinktech.com

# ADLINK Technology GmbH

Hans-Thoma-Straße 11

D-68163 Mannheim, Germany

Tel: +49-621-43214-0

Fax: +49-621 43214-30

Email: emea@adlinktech.com

Please visit the Contact page at www.adlinktech.com for information on how to contact the ADLINK regional office nearest you:
[🔗 Link to the original document](.pxes-2314t-50-1z315-1000-10/pxes-2314t-50-1z315-1000-10.pdf)