# SBC35-ALN

# User’s Manual

3.5” Single Board Computer with Intel® N97 Processor

![Green printed circuit board with various electronic components and connectors (no visible text or symbols)](.sbc35-aln-50m-44840-1000-10/91bf6203ec1de05045bfe88f6b0705e8a60cfbc1b7d0ed20c09250605f542f68.jpg)

Manual Rev.: 1.0

Revision Date: July 10, 2024

Part Number: 50M-44840-1000

# Preface

# Copyright

Copyright 2024 ADLINK Technology, Inc. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

# Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

# Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.

![Symbol of a trash bin crossed with two crossed lines and a solid rectangle below (no text or labels)](.sbc35-aln-50m-44840-1000-10/578d4658f47a3fa88e83b7f7d5098fbd380156d05bfbe87d0b943686dbda82cb.jpg)

Battery Labels (for products with battery)

![Simple line drawing of a trash bin with two crossed lines (no text or symbols)](.sbc35-aln-50m-44840-1000-10/ce383c3602707910111d0fcb6684e8881e1b969d2958b70d214ec2296701bd56.jpg)

![The image displays a black outline of a square containing the standard Mobius loop recycling symbol, consisting of three chasing arrows. Below the square is the text 'Li-ion' in a bold, black, sans-serif font.](.sbc35-aln-50m-44840-1000-10/c1981f8f1118dac3996d1cffeb0af123541e6bd8fb2da6d465316aaaec204cf9.jpg)

![RECYCLE\nRBRC\nLi-ion\n7.800.822.8837](.sbc35-aln-50m-44840-1000-10/4b31942ca41a73a734fc4241f7db8dfdf5230d89275a253deb18ac48a6e442b4.jpg)

![廢電池請回收](.sbc35-aln-50m-44840-1000-10/77112090b7574ab58c45825f263b4fb197f39908f8651c8c4a4a3f13ea07be82.jpg)

# California Proposition 65 Warning

![The image displays a standard warning symbol: a yellow equilateral triangle with a thick black border. Inside the yellow field, there is a large black exclamation point centered vertically and horizontally.](.sbc35-aln-50m-44840-1000-10/af63547a0e4c96df8d11552211e46e1ad5e291220751a9597805c6b049a97334.jpg)

WARNING: This product can expose you to chemicals including acrylamide, arsenic, benzene, cadmium, Tris(1,3-dichloro-2-propyl)phosphate (TDCPP), 1,4-Dioxane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and vinyl materials, which are known to the State of California to cause cancer, and acrylamide, benzene, cadmium, lead, mercury, phthalates, toluene, DEHP, DIDP, DnHP,

DBP, BBP, PVC, and vinyl materials, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

# Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

Revision History

<table><tr><td>Revision</td><td>Description</td><td>Date</td></tr><tr><td>1.0</td><td>Initial release</td><td>2024-07-10</td></tr></table>

# Table of Contents

Preface ....

Table of Contents... .iv

List of Figures ..... ..vi

List of Tables...... ..vii

1 Introduction...

1.1 Packing List ..
1.2 Optional Accessories .

2 Quick Installation..

2.1 Assembling Thermal Solution.. .3
2.2 Installing M.2 Expansion Modules.. 4

3 Specifications ..........

3.1 Core System .
3.2 I/O Interface . .5
3.3 Video . .5
3.4 Audio .5
3.5 LAN.. 5
3.6 Dimension.. .6
3.7 Power Supply... .6
3.8 Temperatures .. .6
3.9 ESD . .6
3.10 Certificate (EMC) .... .6
3.11 Operating Systems . .6
3.12 Functional Block Diagram

4 Mechanical Layout ..

4.1 Connector Locations . .9
4.2 Mechanical Dimensions . .12

5 Connector Pinouts .............. ..15

5.1 LEDs.. ..15
5.2 I2C & SMBus Interface Connector . ..16
5.3 DC In Connector . .17
5.4 RS-232/422/485.. ..18
5.5 Digital Input/Output ... ...19
5.6 M.2 Key-B .. ..19
5.7 M.2 Key-M . ..19

5.8 M.2 Key-E . .19
5.9 USB Connector.. ..19
5.10 SBC-FM Connector.. ..20
5.11 SBC-FM Power Connector.. .21
5.12 Micro SIM.. .22
5.13 Fan Connector . .23
5.14 LCD Connector .. .24
5.15 DB40 Connector . .25

# 6 BIOS Setup..... .27

6.1 Menu Structure . .27
6.2 Main Menu . ..28
6.3 Advanced Menu.. ..28
6.4 Chipset .. .32
6.5 Security..... ..33
6.6 Boot ... ..33
6.7 Save & Exit . .35

# Safety Instructions......... .37

# Getting Service.... ..38

# List of Figures

Figure 1: Functional Block Diagram .
Figure 2: IO Panel Connector Locations . .9
Figure 3: Onboard Connector Locations (Top)... ...10
Figure 4: Onboard Connector Locations (Bottom) .. ..11
Figure 5: Mechanical Dimensions (Top).. ..12
Figure 5: Mechanical Dimensions (Bottom) .. ...13
Figure 6: Mechanical Dimensions – Heatsink / Heat Spreader.. ...13

# List of Tables

Table 1: IO Panel Connector Definitions . .9
Table 2: Onboard Connector Definitions (Top) .. ...10
Table 3: Onboard Connector Definitions (Bottom .. ...11

This page intentionally left blank.

# 1 Introduction

ADLINK SBC35-ALN is a 3.5-inch single board computer powered by Intel® N97 processor. It includes a DDR5 4800MHz memory of up to 16GB, 2x GbE ports (2x 1G-Intel i210IT), and provides support for 3 independent displays (LVDS, HDMI, DP), with LVDS shared with eDP and supported based on project requirements. Additionally, it features SBC-FM interface for I/O expansion, including 1x PCIe, 1x USB2.0, and LPC interfaces. TPM 2.0 is optional.

# 1.1 Packing List

SBC35-ALN motherboard
M.2 screw kit

# 1.2 Optional Accessories

• Passive Heatsink for 12W CPU (Part Number: 32-21039-0000-A0)
• Heat Spreader (Part Number: 32-21039-1000-A0)
• USB 2.0 Type A connector (Part Number: 30-21363-0000-A0)
• RS-232x2 + RS-232/485/422x2 (Part Number: 30-21534-0010-A0)
• RS-232x2 (Part Number: 30-21611-0000-A0)
• DI/Dox8-bits + Audio + USB2.0x2 (Part Number: 30-22122-0000-A0)
• SATA + SATA Power (Part Number: 30-22121-0000-A0)

This page intentionally left blank.

# 2 Quick Installation

This chapter covers how to assemble cooling solutions and M.2 expansion modules for the ADLINK SBC35-ALN.

# 2.1 Assembling Thermal Solution

1. Remove the plastic seal from the thermal pad.

![Technical line drawing of a heat sink component with cooling fins and a red arrow indicating direction (no text or symbols)](.sbc35-aln-50m-44840-1000-10/61e3e7ce712a3785c90f35b56a213b93e18de99d9cf3aa949e9d25d46ad1652d.jpg)

2. Assemble and secure the heatsink using the screws provided, as illustrated below.

![Technical line drawing of an electronic circuit board with multiple ports and connectors (no text or symbols)](.sbc35-aln-50m-44840-1000-10/b671c7383817bf304e8aaa715e071f14ddb7f58547105c2eb3f9a05e0ec5f5ff.jpg)

# 2.2 Installing M.2 Expansion Modules

M.2 B-key and M.2 E-key share the same mounting hole, please install as illustrated below.

![Isometric line drawing of an electronic circuit board with exploded view showing internal components (no text or labels)](.sbc35-aln-50m-44840-1000-10/f6a56fdd9d64031de28ab46402b1ffe093171393502d591a393d56823c28492b.jpg)

# 3 Specifications

# 3.1 Core System

 CPU:
• Intel® Core™ N97 processor
Memory: DDR5 SO-DIMM, up to 4800MHz, 16GB

# 3.2 I/O Interface

 USB:

1x USB 3.2 Gen2x1 port (10Gbps) (rear)
• 1x USB 2.0 via the 40-pin header (for use with internal dongles only)

 COM:

• RS-232/422/485 (rear)
• RS-232/422/485 DB9 or 40-pin box header (default) (by BOM option)
• 2x RS-232 via 40-pin box headers

 Serial ATA: 1x SATA 6Gb/s port w/ 5V SATA power
DI/DO: 8DI, 8DO
TPM: TPM 2.0 (option)
M.2 connectors:

• M.2 2280 M Key (PCIex2)
M.2 2230 E Key with (PCIex1, USB2.0)
M.2 3042 B Key (USB3.0/2.0) w/ SIM card

SBC-FM Board Expansion: 1x PCIe x1, 1x USB 3.0/2.0

# 3.3 Video

 Interfaces: 1x LVDS (shared with eDP based on BOM option), 1x HDMI, 1x DisplayPort

# 3.4 Audio

Audio Codec: Realtek® ALC888S
Interfaces: 1x Mic-in, 1x Line-in, and 1x Line-out

# 3.5 LAN

 LAN1: Intel® i210IT, supporting 1Gbps/ 100Mbps / 10Mbps
 LAN2: Intel® i210IT, supporting 1Gbps/ 100Mbps / 10Mbps

# 3.6 Dimension

 3.5" SBC: 5.75" x 4" (146mm x 102mm)

# 3.7 Power Supply

12V-24V, Reserved DC Jack connector (option)

# 3.8 Temperatures

Operating Temperature: $0 ^ { \circ } \mathsf { C }$ to $6 0 ^ { \circ } \mathsf { C }$
Storage Temperature: $\angle 4 0 ^ { \circ } \mathsf { C }$ to $8 5 ^ { \circ } \mathsf { C }$

# 3.9 ESD

Contact +/- 4kV, Air +/- 8kV

# 3.10 Certificate (EMC)

CE/FCC Class B

# 3.11 Operating Systems

Microsoft® Windows 10 IoT Enterprise LTSC 21H2 (64-bit)
Ubuntu® Desktop 22.04 LTS

# 3.12 Functional Block Diagram

![The diagram centers on the **Intel Alder Lake-N 12W** processor.\n\n**Top Connections:**\n*   Connects to **SO-DIMM1** via **DDR5**.\n*   Connects to **HDMI Redriver** via **DP**. The **HDMI Redriver** connects to **HDMI 2.0** and **DP 1.4**.\n*   Connects to **LVDS/ eDP*** via **DP** and **eDP**.\n\n**Left Side Connections:**\n*   Connects via **PCIe** to **Intel I210IT**, which connects to **LAN1 1GbE**.\n*   Connects directly via **USB2.0** to **USB2.0**.\n*   Connects via **PCIe** to **Intel I210IT**, which connects to **LAN2 1GbE**.\n*   Connects directly via **USB3.2** to **USB3.2 Gen2x1**.\n*   Connects directly via **USB2.0** to **USB2.0**.\n*   Connects directly via **USB2.0** to **USB2.0**.\n*   Connects via **HDA** to **ALC888S**, which connects to **Line-in Line-out Mic**.\n*   Connects via **DI/DO 8bits** to **8*DI/DO**.\n*   Connects via **USB2.0** to **USB2.0**.\n\n**Right Side Connections:**\n*   Connects via **PCIex2** to **M.2 M-Key 2280**.\n*   Connects via **PCIex1, USB2.0** to **M.2 E-Key 2230**.\n*   Connects via **USB3.0/2.0** to **M.2 B-Key 3042**, which connects to **Nano SIM**.\n*   Connects via **SMBus** to **SMBus**.\n*   Connects via **I2C** to **I2C**.\n*   Connects via **SATA3.0** to **SATA III**.\n*   Connects via **SPI** to **BIOS**.\n*   Connects via **SPI** to **TPM2.0 (option)**.\n*   Connects via **USB2.0** to **SBC-FM**.\n*   Connects via **SMBus** to **SBC-FM**.\n*   Connects via **PCIe Gen3x1** to **SBC-FM**.\n\n**Bottom Connections:**\n*   Connects via **eSPI** to **SIO NCT6126D**.\n*   **SIO NCT6126D** connects to **FAN**.\n*   **SIO NCT6126D** connects via **COM1** to **RS232/422/485**.\n*   **SIO NCT6126D** connects via **COM2** to **RS232/422/485**.\n*   **SIO NCT6126D** connects via **COM3** to **RS232**.\n*   **SIO NCT6126D** connects via **COM4** to **RS232**.\n*   These serial ports connect to the **40pin box header**.](.sbc35-aln-50m-44840-1000-10/5507b8857b059beb368e1469619becd393cdf146941d731fb766045afb9ec23b.jpg)

Figure 1: Functional Block Diagram

This page intentionally left blank.

# 4 Mechanical Layout

# 4.1 Connector Locations

![A\nB\nC\nD\nE\nF\nG\nJ\nI\nH](.sbc35-aln-50m-44840-1000-10/4cbc99fdf8bfce97eb5170090b817a6df046e44afdadc4ea4efe4984f4c1c0c2.jpg)

Figure 2: IO Panel Connector Locations

Table 1: IO Panel Connector Definitions

<table><tr><td colspan="2">IO Panel Connectors</td></tr><tr><td>Item</td><td>Description</td></tr><tr><td>A</td><td>DC In connector</td></tr><tr><td>B</td><td>2x USB 2.0 connectors</td></tr><tr><td>C</td><td>DisplayPort connector</td></tr><tr><td>D, E</td><td>RJ45 LAN port</td></tr><tr><td>F</td><td>COM1</td></tr><tr><td>G</td><td>Power button</td></tr><tr><td>H</td><td>USB 3.0 Gen2</td></tr><tr><td>I</td><td>USB 2.0</td></tr><tr><td>J</td><td>HDMI connector</td></tr></table>

![K\nDDR5 H=9.2R\nL\nM\nT\nS\nN\nO\nU\nR\nQ\nP](.sbc35-aln-50m-44840-1000-10/49ed0fa9ef4f8d239d1d45a98f2d8351ae40e9d5a0c33b301269177488b42f79.jpg)

Figure 3: Onboard Connector Locations (Top)

Table 2: Onboard Connector Definitions (Top)

<table><tr><td colspan="2">Onboard Connectors</td></tr><tr><td>Item</td><td>Description</td></tr><tr><td>K</td><td>DDR5 SO-DIMM</td></tr><tr><td>L</td><td>SBC-FM connector</td></tr><tr><td>M</td><td>M.2 E-key (PCIe Gen3 x1, 1x USB 2.0)</td></tr><tr><td>N</td><td>Wafer for DIDO + MIC + Line-in + Line-out + USB 2.0</td></tr><tr><td>O</td><td>Wafer for COM 2,3,4</td></tr><tr><td>P</td><td>SATA connector</td></tr><tr><td>Q</td><td>SATA Power connector</td></tr><tr><td>R</td><td>M.2 B-key (1x USB 3.0 + 2.0)</td></tr><tr><td>S</td><td>Nano SIM1 connector</td></tr><tr><td>T</td><td>M.2 M-key (PCIe Gen 3 x2)</td></tr><tr><td>U</td><td>External Power connector for SBC-FM board</td></tr></table>

![W\nV\nX\nY\nZ\na](.sbc35-aln-50m-44840-1000-10/2afecc5acf64a3ead72912f9b8021588b512c64b2fc3c97aa3580e379a1e5415.jpg)

Figure 4: Onboard Connector Locations (Bottom)

Table 3: Onboard Connector Definitions (Bottom)

<table><tr><td colspan="2">Onboard Connectors</td></tr><tr><td>Item</td><td>Description</td></tr><tr><td>V</td><td>eDP/LVDS connectorNote: Defaulted as LVDS, please contact ADLINK sales representative for eDP support.</td></tr><tr><td>W</td><td>DB40 Debug port</td></tr><tr><td>X</td><td>SMBus connector</td></tr><tr><td>Y</td><td>Fan connector</td></tr><tr><td>Z</td><td>I2C connector</td></tr><tr><td>a</td><td>ESPI Debug connector</td></tr></table>

# 4.2 Mechanical Dimensions

Top View
![102(4015.7)\n98.2(3866.1)\n84.4(3322.8)\n39.4(1551.2)\n3.4(133.9)\n0(0)\nDDR5 H=9 2R\n3.4 (133.9)\n0 (0)\n22.55 (887.8)\n72.55 (2856.3)\n142.2 (5598.4)\n142.6 (5614.2)\n146 (5748)](.sbc35-aln-50m-44840-1000-10/179906010df73f92e0b72819bb68695db181148b2e63140b5dabaa12de631137.jpg)

Dimensions: mm

Figure 5: Mechanical Dimensions (Top)

# Bottom View

![102(4015.7)\n98.2(3866.1)\n84.4(3322.8)\n39.4(1551.2)\n3.4(133.9)\n0(0)\n0(0)\n3.4(133.9)\n3.8(149.6)\n73.45(2891.7)\n123.45(4860.2)\n142.2(5598.4)\n142.6(5614.2)\n146(5748)](.sbc35-aln-50m-44840-1000-10/1e3cd6e3a0b57683a62eeb1f167b43d6ddbea917595478876ebb80adfad622a1.jpg)

Dimensions: mm
Figure 6: Mechanical Dimensions (Bottom)

# Side View

![32.29](.sbc35-aln-50m-44840-1000-10/274c453b811716a55c411c07602bfa8deaa225fe11420d4743ede3a3f1330748.jpg)

![Technical line drawing of a mechanical assembly with no visible text or symbols](.sbc35-aln-50m-44840-1000-10/33dd7efcff2249e2ca364ed91b3da7b2e9a3ec310014899cf5c367990416ef59.jpg)

Dimensions: mm
Figure 7: Mechanical Dimensions – Heatsink / Heat Spreader

This page intentionally left blank.

# 5 Connector Pinouts

# 5.1 LEDs

There are three LEDs on the front panel, as indicated below.

![Stacked electronic circuit boards with various connectors and components, no visible text or symbols](.sbc35-aln-50m-44840-1000-10/b4a65306fb5f3eb92464f9e48c8d273df811de98b910b14d743f0a5e1a65919c.jpg)

LED3 LED2 LED1

# 5.1.1 Indicator LEDs

<table><tr><td>LED Indication</td><td>Location</td><td>Color</td><td>Description</td></tr><tr><td>Hard disk drive (HD)</td><td>LED1</td><td>Red</td><td>Blinking indicates that the SATA HDD and/or SSD are active.</td></tr><tr><td>Diagnostic (DG)</td><td>LED2</td><td>Red</td><td>Lighting continuously indicates that no physical storage is connected.Blinking indicates that no memory is installed on either SO-DIMM socket.</td></tr><tr><td>User-defined</td><td>LED3</td><td>Red</td><td>User-defined LED</td></tr></table>

# 5.1.2 Power LED

The power LED is a non-latched button with a blue color LED indicator on the front panel.

<table><tr><td>System status</td><td>Power LED</td></tr><tr><td>System Turned on</td><td>Light On</td></tr><tr><td>Suspend (S3)</td><td>Blinking</td></tr><tr><td>Hibernation (S4)</td><td>Blinking</td></tr><tr><td>Power Off (S5)</td><td>Light Off</td></tr></table>

# 5.1.3 LAN LED

LAN Active/Link LED (Right LED)

<table><tr><td>LED Color</td><td>Status</td><td>Description</td></tr><tr><td rowspan="3">Yellow</td><td>Off</td><td>Ethernet port is disconnected.</td></tr><tr><td>On</td><td>Ethernet port is connected with no activity.</td></tr><tr><td>Flashing</td><td>Ethernet port is connected and active.</td></tr></table>

LAN Speed LED (Left LED)

<table><tr><td>LED Color</td><td>Status</td><td>Description</td></tr><tr><td rowspan="3">Green/Yellow</td><td>Off</td><td>10 Mbps</td></tr><tr><td>Green</td><td>100 Mbps</td></tr><tr><td>Yellow</td><td>1000 Mbps</td></tr></table>

# 5.2 I2C & SMBus Interface Connector

There are two I2C interface connectors on both side of MB for customer to use from, 3.3V or 5V.

Manufacturer: JVE

MFG P/N: 24W1125A-06S10-01T-0.5-CF01

ADLINK P/N: 61-69J0X-1060

Location: I2C1

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>P_+5V_A</td></tr><tr><td>2</td><td>P_+3V3_A</td></tr><tr><td>3</td><td>PCH_I2C0_SDA</td></tr><tr><td>4</td><td>PCH_I2C0_SCL</td></tr><tr><td>5</td><td>I2C1_GPIO-L</td></tr><tr><td>6</td><td>GND</td></tr></table>

Manufacturer: JVE

MFG P/N: 24W1125A-06S10-01T-0.5-CF01

ADLINK P/N: 61-69J0X-1060

Location: SMB1

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>P_+5V_A</td></tr><tr><td>2</td><td>P_+3V3_A</td></tr><tr><td>3</td><td>PCH_SMB_DAT_A</td></tr><tr><td>4</td><td>PCH_SMB_CLK_A</td></tr><tr><td>5</td><td>PCH_SMB_ALERT-L</td></tr><tr><td>6</td><td>GND</td></tr></table>

# 5.3 DC In Connector

The SBC35-ALN has two types of DC In connector options: a DC jack with lock and a box header designed for customizable DC cables.

Input Power: 12-24V, 8A
OVP: 28.84V
UVP: 7.4V
Reverse power protect: Yes

DC Jack Power Connector

Manufacturer: Shen Ming

MFG P/N: 655-125

ADLINK P/N: 20-920N0-0030

Location: DC1

<table><tr><td rowspan="3">12.5±0.3
3.0
φ5.6-0
+0.1
2.6-0
+0.2
0.25t</td><td rowspan="3">20.2
8.5
△8.65
M8.0X0.75
BOTTOM VIEW</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>Power</td></tr><tr><td>2</td><td>GND</td></tr></table>

DC Input Power Connector

Manufacturer: DECA

MFG P/N: MPE101-76202P, Green

ADLINK P/N: 20-65710-2020

Location: DC2

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>GND</td></tr><tr><td>2</td><td>GND</td></tr><tr><td>3</td><td>PWR</td></tr><tr><td>4</td><td>PWR</td></tr></table>

# 5.4 RS-232/422/485

There are four COM ports designed on this board, Port 1 is designated for the SMT connector, while Port 2 can accommodate either a box header or an SMT connector based on the BOM option. Ports 3 and 4 are exclusively for wafer connectors, Ports 1 and 2 can be set to RS-232, 422, or 485 in BIOS menu, while Ports 3 and 4 only support RS-232.

Manufacturer: HIROSE

MFG P/N: DF13E-40DP-1.25V(52)

ADLINK P/N: 61-61000-2200

Location: COM1

Manufacturer: FOXCONN

MFG P/N: DM10151-H531-4F,TEAL

ADLINK P/N: 21-12P81-0090

Location: COM2

or

Manufacturer: FOXCONN

MFG P/N: DT10121-M5W3-4F,Teal

ADLINK P/N: 21-12P31-0090

Location: COM3 (co-lay with COM2)

# 5.4.1 RS-232/422/485 DB9 Connector Pin Definition

<table><tr><td>Pin</td><td>RS232</td><td>RS422</td><td>RS485</td></tr><tr><td>1</td><td>DCD#</td><td>TXD-</td><td>DATA-</td></tr><tr><td>2</td><td>RX</td><td>TXD+</td><td>DATA+</td></tr><tr><td>3</td><td>TX</td><td>RXD+</td><td></td></tr><tr><td>4</td><td>DTR#</td><td>RXD-</td><td></td></tr><tr><td>5</td><td>GND</td><td>GND</td><td></td></tr><tr><td>6</td><td>DSR#</td><td></td><td></td></tr><tr><td>7</td><td>RTS#</td><td></td><td></td></tr><tr><td>8</td><td>CTS#</td><td></td><td></td></tr><tr><td>9</td><td>RI#</td><td></td><td></td></tr></table>

# 5.5 Digital Input/Output

There are 8 DI +8 DO on the wafer connector. DO signal is PH \*P\_+5V\_S0” on the MB side, with an output current of 8mA. DI signal only has one pull down, 100k, on the MB side.

Manufacturer: HIROSE

MFG P/N: DF13E-40DP-1.25V(52)

ADLINK P/N: 61-61000-2200

Location: DIO1

# 5.6 M.2 Key-B

M.2 Key-B connector supports 304-size card and 2 USIM slots for two-SIM card situation. This connector only supports USB3.0+USB2.0 interface, and not PCIe.

# 5.7 M.2 Key-M

M.2 Key-M supports NVMe SSD and only PCIe GEN3 x2 speed along with 2280-size card.

# 5.8 M.2 Key-E

M.2 Key-E connector supports 2230-size card.

# 5.9 USB Connector

There are 3x USB 2.0 Ports + 1x USB 3.0 Gen 2 port on the front panel. The 3x USB 2.0 ports provide 0.5A current per port, while the USB 3.0 Gen 2 port provides 1A current. All ports have overcurrent protection. There is a USB2.0 wafer port available for USB dongle using.

# 5.10 SBC-FM Connector

The SBC-FM connector includes PCIe, USB 2.0, SMBus, and LPC interfaces.

The SBC-FM connector is designed for an additional ADLINK function board. The function board connector is designed for ODM projects requiring function boards tailored to varying customer requirements.

Manufacturer: HIROSE

MFG P/N: FH34SRJ-50S-0.5SH(50)

ADLINK P/N: 61-02010-0500

Location: AFM1

<table><tr><td rowspan="2"></td><td>Pin</td><td>Signal</td></tr><tr><td colspan="2">Follow the below table</td></tr></table>

<table><tr><td colspan="6">SBC-FM Connector Pin Definition</td></tr><tr><td>Description</td><td>Signal Name</td><td>Pin#</td><td>Pin#</td><td>Signal Name</td><td>Description</td></tr><tr><td>GND</td><td>GND</td><td>1</td><td>27</td><td>PCH_CLK_REQ_P6_N</td><td>PCIE3 CLK Request</td></tr><tr><td rowspan="16">PCIe4 x4(ALN not supported)</td><td>NC</td><td>2</td><td>28</td><td>NC</td><td rowspan="4">USB3.0(ALN not supported)</td></tr><tr><td>NC</td><td>3</td><td>29</td><td>NC</td></tr><tr><td>NC</td><td>4</td><td>30</td><td>NC</td></tr><tr><td>NC</td><td>5</td><td>31</td><td>NC</td></tr><tr><td>NC</td><td>6</td><td>32</td><td>U2_USB0_P</td><td rowspan="2">USB2.0</td></tr><tr><td>NC</td><td>7</td><td>33</td><td>U2_USB0_N</td></tr><tr><td>NC</td><td>8</td><td>34</td><td>LPC_CLK</td><td rowspan="8">LPC</td></tr><tr><td>NC</td><td>9</td><td>35</td><td>LPC_AD3</td></tr><tr><td>NC</td><td>10</td><td>36</td><td>LPC_AD2</td></tr><tr><td>NC</td><td>11</td><td>37</td><td>LPC_AD1</td></tr><tr><td>NC</td><td>12</td><td>38</td><td>LPC_AD0</td></tr><tr><td>NC</td><td>13</td><td>39</td><td>LPC_LFRAME#</td></tr><tr><td>NC</td><td>14</td><td>40</td><td>LPC_SERIRQ</td></tr><tr><td>NC</td><td>15</td><td>41</td><td>LPC_LRESET#</td></tr><tr><td>NC</td><td>16</td><td>42</td><td>PCIE_WAKE-L</td><td>PCIE Wake</td></tr><tr><td>NC</td><td>17</td><td>43</td><td>PCH_SLP_S3_N</td><td>PCH_SLP3</td></tr><tr><td>PCIe4 CLK Request(ALN not supported)</td><td>NC</td><td>18</td><td>44</td><td>PCH_PLTRST-L_BUF</td><td>PCH_PLTRST</td></tr><tr><td rowspan="2">PCIe4 CLK(ALN not supported)</td><td>NC</td><td>19</td><td>45</td><td>SMB_CLK_S</td><td rowspan="3">SMB</td></tr><tr><td>NC</td><td>20</td><td>46</td><td>SMB_DAT_S</td></tr><tr><td rowspan="4">PCIe3 x1</td><td>X_PCIEX10_FM_TX_P</td><td>21</td><td>47</td><td>PCH_SMB_ALERT-L</td></tr><tr><td>X_PCIEX10_FM_TX_N</td><td>22</td><td>48</td><td>GND</td><td>GND</td></tr><tr><td>X_PCIEX10_FM_RX_P</td><td>23</td><td>49</td><td>P_+3V3_A</td><td rowspan="2">3.3V PWR(Standby)</td></tr><tr><td>X_PCIEX10_FM_RX_N</td><td>24</td><td>50</td><td>P_+3V3_A</td></tr><tr><td rowspan="2">PCIe3 CLK</td><td>C_REFCLK_P6_100M_P</td><td>25</td><td></td><td></td><td></td></tr><tr><td>C_REFCLK_P6_100M_N</td><td>26</td><td></td><td></td><td></td></tr></table>

# 5.11 SBC-FM Power Connector

This connector provides DC In power to the SBC-FM board, with a maximum current of 2A.

Manufacturer: MOLEX

MFG P/N: 53398-0471, Natural

ADLINK P/N: 61-69J03-1040

Location: AFM2

![| Component       | Value |\n| --------------- | ----- |\n| Pin             | Signal |\n| 1               | P_+VIN_S |\n| 2               | P_+VIN_S |\n| 3               | GND   |\n| 4               | GND   |\n| 10.15           | 9.75  |\n| 8.9             | 8.5   |\n| 7.65            | 7.25  |\n| F               | E     |\n| Pin1            | 0.625 |\n| Pin1            | 0.625 (PITCH) |\n| Pin1            | 0.625 (PITCH) |\n| Pin1            | 0.32 (PITCH) |\n| Pin1            | 0.32 (PITCH) |\n| Pin1            | 0.32 (PITCH) |\n| Pin1            | 0.32 (PITCH) |\n| Pin1            | 0.32 (PITCH) |\n| Pin1            | 0.32 (PITCH) |\n| Pin1            | 0.32 (PITCH) |\n| Pin1            = 0.625, Pin1 = 0.625, Pin1 = 0.625, Pin1 = 0.32, Pin1 = 0.32, Pin1 = 0.725, Pin1 = 0.725, Pin1 = 0.32, Pin1 = 0.725, Pin1 = 0.32, Pin1 = 0.725, Pin1 = 0.32, Pin1 = 0.725, Pin1 = 0.725, Pin1 = 0.725, Pin1 = 0.725, Pin1 = 0.725, Pin1 = 0.725, Pin1 = 0.725, Pin1 = 0.725, Pin1 = 0.725, Pin1 = 0.725, Pin1 = 0.72, Pin1 = 0.72, Pin1 = 0.72, Pin1 = 0.72, Pin1 = 0.72, Pin1 = 0.72, Pin1 = 0.72, Pin1 = 0.72, Pin1 = 0.72, Pin1 = 0.72, Pin1 = 0.72, Pin1 = 0.72 |\n| Pin            | Signal |\n| 1               | P_+VIN_S |\n| 2               | P_+VIN_S |\n| 3               | GND   |\n| 4               | GND   |](.sbc35-aln-50m-44840-1000-10/50f04872e0b0e1ce0946cf41d5b12d00382cf1f7bcd290e619f589cfeeca8fbb.jpg)

# 5.12 Micro SIM

There are two SIM connectors for WWAN card (M.2 B Key).

Manufacturer: Molex

MFG P/N: 78800-0001, BLACK

ADLINK P/N: 61-E0013-0060

Location: M2B2, M2B3

<table><tr><td rowspan="7"></td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>SIM PWR</td></tr><tr><td>2</td><td>REST#</td></tr><tr><td>3</td><td>CLK</td></tr><tr><td>5</td><td>GND</td></tr><tr><td>6</td><td>VPP</td></tr><tr><td>7</td><td>DATA</td></tr></table>

# 5.13 Fan Connector

The fan connector provides a 5V CPU fan, with a maximum current of 1A.

Manufacturer: JVE

MFG P/N: 24W1125A-04M00-01T-1-CF01, Beige

ADLINK P/N: 61-6AJ0X-1040

Location: FAN1

![Pin 1\n4.30±0.15\n1.00±0.15\n1.25±0.05\nL1±0.15](.sbc35-aln-50m-44840-1000-10/ea1ca1c373c97616154623479b138dc387365a7661daa1fb7feaebcc98bc21d6.jpg)

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>GND</td></tr><tr><td>2</td><td>P_+5V_S0</td></tr><tr><td>3</td><td>FAN_FG</td></tr><tr><td>4</td><td>FAN_PWM</td></tr></table>

# 5.14 LCD Connector

The LCD connector is based on BOM SKU. It can carry LVDS signal (2-channels) or EDP signal (4-channels) via one connector.

Manufacturer: ACES

MFG P/N: 50473-0400M-001

ADLINK P/N: 61-72005-0400

Location: LCD2

<table><tr><td rowspan="33"></td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>HPD</td></tr><tr><td>2</td><td>BKLT_EN</td></tr><tr><td>3</td><td>BKLT_CTL</td></tr><tr><td>4</td><td>LVDS_I2C_CLK</td></tr><tr><td>5</td><td>LVDS_I2C_DAT</td></tr><tr><td>6</td><td>GND</td></tr><tr><td>7</td><td>G_LVDS_B_TX3_P</td></tr><tr><td>8</td><td>G_LVDS_B_TX3_N</td></tr><tr><td>9</td><td>G_LVDS_B_CLK_P</td></tr><tr><td>10</td><td>G_LVDS_B_CLK_N</td></tr><tr><td>11</td><td>GND</td></tr><tr><td>12</td><td>G_LVDS_B_TX2_P</td></tr><tr><td>13</td><td>G_LVDS_B_TX2_N</td></tr><tr><td>14</td><td>G_LVDS_B_TX1_P</td></tr><tr><td>15</td><td>G_LVDS_B_TX1_N</td></tr><tr><td>16</td><td>GND</td></tr><tr><td>17</td><td>G_LVDS_B_TX0_P</td></tr><tr><td>18</td><td>G_LVDS_B_TX0_N</td></tr><tr><td>19</td><td>GND</td></tr><tr><td>20</td><td>LVDS_TX3_EDP_TX3_P</td></tr><tr><td>21</td><td>LVDS_TX3_EDP_TX3_N</td></tr><tr><td>22</td><td>GND</td></tr><tr><td>23</td><td>LVDS_CLK_EDP_TX2_P</td></tr><tr><td>24</td><td>LVDS_CLK_EDP_TX2_N</td></tr><tr><td>25</td><td>GND</td></tr><tr><td>26</td><td>LVDS_TX2_EDP_TX1_P</td></tr><tr><td>27</td><td>LVDS_TX2_EDP_TX1_N</td></tr><tr><td>28</td><td>GND</td></tr><tr><td>29</td><td>LVDS_TX1_EDP_TX0_P</td></tr><tr><td>30</td><td>LVDS_TX1_EDP_TX0_N</td></tr><tr><td>31</td><td>GND</td></tr><tr><td>32</td><td>LVDS_TX0_EDP_AUX_P</td></tr><tr><td rowspan="8"></td><td>33</td><td>LVDS_TX0_EDP_AUX_N</td></tr><tr><td>34</td><td>GND</td></tr><tr><td>35</td><td>GND</td></tr><tr><td>36</td><td>GND</td></tr><tr><td>37</td><td>P_+LCDBL_S</td></tr><tr><td>38</td><td>P_+LCDBL_S</td></tr><tr><td>39</td><td>P_+LCDBL_S</td></tr><tr><td>40</td><td>P_+LCDVDDCN_S</td></tr></table>

# 5.15 DB40 Connector

The DB40 connector is used for internal debug purposes.

Manufacturer: ACES

MFG P/N: 50520-04001-001

ADLINK P/N: 61-02000-0400

Location: DB1

<table><tr><td rowspan="25">&lt;img src="images/f08da87cfb24441b3dd77887b5d2df17a417b469de7e289c82ce15a136967ed5.jpg"/&gt;</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>GND</td></tr><tr><td>2</td><td>PCH_RSMRST_R_N</td></tr><tr><td>3</td><td>NC</td></tr><tr><td>4</td><td>NC</td></tr><tr><td>5</td><td>NC</td></tr><tr><td>6</td><td>PCH_SLP_S5_N</td></tr><tr><td>7</td><td>PCH_SLP_S4_N</td></tr><tr><td>8</td><td>PCH_SLP_S3_N</td></tr><tr><td>9</td><td>SYS_PWROK</td></tr><tr><td>10</td><td>PCH_PLTRST-L</td></tr><tr><td>11</td><td>DB40_RSTBTN-L</td></tr><tr><td>12</td><td>PCH_PWRBTN-L</td></tr><tr><td>13</td><td>NC</td></tr><tr><td>14</td><td>NC</td></tr><tr><td>15</td><td>NC</td></tr><tr><td>16</td><td>NC</td></tr><tr><td>17</td><td>NC</td></tr><tr><td>18</td><td>NC</td></tr><tr><td>19</td><td>NC</td></tr><tr><td>20</td><td>NC</td></tr><tr><td>21</td><td>GND</td></tr><tr><td>22</td><td>P_+3V3_A</td></tr><tr><td>23</td><td>P_+3V3_A</td></tr><tr><td>24</td><td>LPC_AD0</td></tr><tr><td rowspan="16"></td><td>25</td><td>LPC_AD1</td></tr><tr><td>26</td><td>LPC_AD2</td></tr><tr><td>27</td><td>LPC_AD3</td></tr><tr><td>28</td><td>LPC_LFRAME#</td></tr><tr><td>29</td><td>LPC_CLK</td></tr><tr><td>30</td><td>PCH_PLTRST-L</td></tr><tr><td>31</td><td>NC</td></tr><tr><td>32</td><td>GND</td></tr><tr><td>33</td><td>P_+3V3_S0</td></tr><tr><td>34</td><td>DB40_SPI_CLK</td></tr><tr><td>35</td><td>DB40_SPI_MOSI</td></tr><tr><td>36</td><td>DB40_SPI_MISO</td></tr><tr><td>37</td><td>NC</td></tr><tr><td>38</td><td>DB40_SPI_CS0-L</td></tr><tr><td>39</td><td>GND</td></tr><tr><td>40</td><td>P_+3V3_SPI_A</td></tr></table>

# 6 BIOS Setup

# 6.1 Menu Structure

This section presents the primary menus of the AMIBIOS® EFI BIOS setup utility. Use the following table as a quick reference for the contents of the BIOS Setup Utility. The subsections describe the submenus and options for each menu item.

To enter the BIOS Setup Utility:

• Press [Delete] or [Del] during POST (Power-On-Self-Test)

<table><tr><td>Main</td><td>Advanced</td><td>Chipset</td></tr><tr><td>Sets up the system time/date and displays the system information:System DateSystem Time</td><td>CPU ConfigurationPower ManagementSerial Console RedirectionUSB ConfigurationTPM 2.0 ConfigurationOnboard Devices ConfigurationHardware MonitorBIOS Watchdog TimerPanel ConfigurationNetwork Stake Configuration</td><td>Memory ConfigurationPCI Express ConfigurationSATA ConfigurationUSB ConfigurationSecurity Configuration</td></tr><tr><td>Security</td><td>Boot</td><td>Save &amp; Exit</td></tr><tr><td>Changes or clears the administrator/user password for the systemPassword DescriptionUser PasswordSecure Boot</td><td>Configures the boot settings and boot priority for available devicesBoot ConfigurationFixed Boot Order Priorities</td><td>Exits the BIOS Setup Utility while saving or discard the changes madeSave Changes and ExitDiscard Changes and ExitSave Changes and ResetDiscard Changes and ResetSave ChangesDiscard ChangesRestore DefaultsSave as User DefaultsRestore User DefaultsLaunch EFI Shell from filesystem device</td></tr></table>

# 6.2 Main Menu

Upon entering the BIOS Setup Utility, the Main Menu is displayed, providing read-only information about your system and also allows you to set the System Date and Time. Refer to the tables below for details of the submenus and settings.

<table><tr><td>Feature</td><td>Description</td></tr><tr><td colspan="2">BIOS Information</td></tr><tr><td>BIOS Vendor</td><td>American Megatrends Inc.</td></tr><tr><td>BIOS Version</td><td>1.00.10</td></tr><tr><td>Build Date</td><td>04/23/2024</td></tr><tr><td>MRC Version</td><td>0.0.4.74</td></tr><tr><td>GOP Version</td><td>21.0.1063</td></tr><tr><td>ME FW Version</td><td>16.50.10.1351</td></tr><tr><td colspan="2">System Information</td></tr><tr><td>Project Name</td><td>SBC35-ALN</td></tr><tr><td>CPU Board Version</td><td>A2</td></tr><tr><td>CPU Brand String</td><td>Intel(R) N97</td></tr><tr><td>CPU Frequency</td><td>2.00GHz</td></tr><tr><td>Total Memory</td><td>8192 MB (DDR5)</td></tr><tr><td>Memory Frequency</td><td>4800 MHz</td></tr><tr><td>PCH SKU</td><td>N Premium SKU</td></tr><tr><td>Access Level</td><td>Administrator</td></tr></table>

# 6.3 Advanced Menu

# 6.3.1 Advanced > CPU Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td colspan="2">ID</td><td>0xB06E0</td></tr><tr><td colspan="2">Brand String</td><td>Intel(R) N97</td></tr><tr><td colspan="2">Microcode Revision</td><td>15</td></tr><tr><td colspan="2">L1 Data Cache</td><td>32 KB x 4</td></tr><tr><td colspan="2">L1 Instruction Cache</td><td>64 KB x 4</td></tr><tr><td colspan="2">L2 Cache</td><td>2048 KB</td></tr><tr><td colspan="2">L3 Cache</td><td>6 MB</td></tr><tr><td colspan="2">VMX</td><td>Supported</td></tr><tr><td colspan="2">SMX/TXT</td><td>Not Supported</td></tr><tr><td>Active Efficient-cores</td><td>All, 3, 2, 1</td><td>Number of E-cores to enable in each processor package. Note: Number of Cores and E-cores are looked at together. When both are {0,0}, Pcode will enable all cores.</td></tr><tr><td>Intel(R) SpeedStep(tm)</td><td>Disabled, Enabled</td><td>Allows more than two frequency ranges to be supported.</td></tr><tr><td>Turbo Mode</td><td>Disabled, Enabled</td><td>Enable/Disable processor Turbo Mode (requires EMTTM enabled too). AUTO means enabled.</td></tr><tr><td>Intel(R) Speed Shift Technology</td><td>Disabled, Enabled</td><td>Enable/Disable Intel(R) Speed Shift Technology support. Enabling will expose the CPPC v2 interface to allow for hardware-controlled P-states.</td></tr><tr><td>Intel (VMX) Virtualization Technology</td><td>Disabled, Enabled</td><td>When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology.</td></tr><tr><td>VT-d</td><td>Enabled, Disabled</td><td>VT-d capability</td></tr><tr><td>C states</td><td>Disabled, Enabled</td><td>Enable/Disable CPU Power Management. Allows CPU to go to C states when it&#x27;s not 100% utilized.</td></tr></table>

6.3.2 Advanced > Power Management

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Enable Hibernation</td><td>Disabled, Enabled</td><td>Enables or Disables System ability to Hibernate (OS/S4 Sleep State). This option may not be effective with some operating systems.</td></tr><tr><td>ACPI Sleep State</td><td>Suspend Disabled, S3 (Suspend to RAM)</td><td>Select the highest ACPI sleep state the system will enter when the SUSPEND button is pressed.</td></tr><tr><td>State After G3</td><td>S0 State, S5 State</td><td>Specify what state to go to when power is re-applied after a power failure (G3 state).</td></tr></table>

6.3.3 Advanced > Hardware Monitor

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Board Temperature 1</td><td colspan="2">N/A</td></tr><tr><td>Board Temperature 2</td><td colspan="2">N/A</td></tr><tr><td>Board Fan Speed</td><td colspan="2">N/A</td></tr><tr><td>Fan1 Mode</td><td>Manual mode, SMART FAN IV, Auto Mode</td><td>Fan control mode select</td></tr><tr><td>Manual PWM</td><td>[ Max-Value, Min-Value, Step-Value] = [ 0xFF, 0x00, 0x01]</td><td>Fan will work with this Manual PWM Value (0 to 255 for 0% to 100%)</td></tr><tr><td>Temperature 1</td><td>[ Max-Value, Min-Value, Step-Value] = [ 0xFF, 0x00, 0x01]</td><td>The value of temperature1.</td></tr><tr><td>Percent of full FD/RPM 1</td><td>[ Max-Value, Min-Value, Step-Value] = [ 0x64, 0x00, 0x01]</td><td>The percent of full Fan Duty/RPM when temperature is T1.</td></tr><tr><td>Temperature 2</td><td>[ Max-Value, Min-Value, Step-Value] = [ 0xFF, 0x00, 0x01]</td><td>The value of temperature2.</td></tr><tr><td>Percent of full FD/RPM 2</td><td>[ Max-Value, Min-Value, Step-Value] = [ 0x64, 0x00, 0x01]</td><td>The percent of full Fan Duty/RPM when temperature is T2.</td></tr><tr><td>Temperature 3</td><td>[ Max-Value, Min-Value, Step-Value] = [ 0xFF, 0x00, 0x01]</td><td>The value of temperature3.</td></tr><tr><td>Percent of full FD/RPM 3</td><td>[ Max-Value, Min-Value, Step-Value] = [ 0x64, 0x00, 0x01]</td><td>The percent of full Fan Duty/RPM when temperature is T3.</td></tr><tr><td>Temperature 4</td><td>[ Max-Value, Min-Value, Step-Value] = [ 0xFF, 0x00, 0x01]</td><td>The value of temperature4.</td></tr><tr><td>Percent of full FD/RPM 4</td><td>[ Max-Value, Min-Value, Step-Value] = [ 0x64, 0x00, 0x01]</td><td>The percent of full Fan Duty/RPM when temperature is T4.</td></tr><tr><td>Critical temperature</td><td>[ Max-Value, Min-Value, Step-Value] = [ 0xFF, 0x00, 0x01]</td><td>Fan temperature critical value.</td></tr><tr><td>VCORE</td><td colspan="2">N/A</td></tr><tr><td>VIN0</td><td colspan="2">N/A</td></tr><tr><td>VIN1</td><td colspan="2">N/A</td></tr><tr><td>VIN2</td><td colspan="2">N/A</td></tr><tr><td>AVSB</td><td colspan="2">N/A</td></tr><tr><td>VBAT</td><td colspan="2">N/A</td></tr></table>

6.3.4 Advanced > BIOS Watchdog Timer

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>BIOS POST Watchdog</td><td>Disabled, Second Mode, Minute Mode</td><td>1. Disable: Disable Watchdog Timer; 2. Second Mode: Enable Watchdog Timer in second mode; 3. Minute Mode: Enable Watchdog Timer in minute mode.</td></tr></table>

6.3.5 Advanced > Onboard Device Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td colspan="3">&gt; Serial Port 1 Configuration</td></tr><tr><td>COM1 Mode Control</td><td>RS232, RS422, RS485</td><td>Select COM1 mode. RS232, RS422, RS485</td></tr><tr><td colspan="3">&gt; Serial Port 2 Configuration</td></tr><tr><td>COM2 Mode Control</td><td>RS232, RS422, RS485</td><td>Select COM2 mode. RS232, RS422, RS485</td></tr><tr><td colspan="3">&gt; Serial Port 3 Configuration</td></tr><tr><td colspan="3">&gt; Serial Port 4 Configuration</td></tr><tr><td>COM1 TX termination</td><td>Enable, Disable</td><td>COM1 TX termination Enable/Disable</td></tr><tr><td>COM1 RX termination</td><td>Enable, Disable</td><td>COM1 RX termination Enable/Disable</td></tr><tr><td>COM2 TX termination</td><td>Enable, Disable</td><td>COM2 TX termination Enable/Disable</td></tr><tr><td>COM2 RX termination</td><td>Enable, Disable</td><td>COM2 RX termination Enable/Disable</td></tr><tr><td>LAN #1</td><td>Enabled, Disabled</td><td>Enable/Disable</td></tr><tr><td>LAN #2</td><td>Enabled, Disabled</td><td>Enable/Disable</td></tr></table>

6.3.6 Advanced > Serial Console Redirection

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Console Redirection</td><td colspan="2">Port Is Disabled</td></tr><tr><td>Console Redirection</td><td>Disabled, Enabled</td><td>Console Redirection Enable or Disable.</td></tr></table>

6.3.6.1. Advanced > Serial Console Redirection > Serial Console Redirection Settings

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Terminal Type</td><td>VT100, VT100Plus, VT-UTF8, ANSI</td><td>Emulation: ANSI: Extended ASCII char set. VT100: ASCII char set. VT100Plus: Extends VT100 to support color, function keys, etc. VT-UTF8: Uses UTF8 encoding to map Unicode chars onto 1 or more bytes.</td></tr><tr><td>Bits per second</td><td>9600, 19200, 38400, 57600, 115200</td><td>Selects serial port transmission speed. The speed must be matched on the other side. Long or noisy lines may require lower speeds.</td></tr><tr><td>Data Bits</td><td>7, 8</td><td>Data Bits</td></tr><tr><td>Parity</td><td>None, Even, Odd, Mark, Space</td><td>A parity bit can be sent with the data bits to detect some transmission errors. Even: parity bit is 0 if the num of 1&#x27;s in the data bits is even. Odd: parity bit is 0 if num of 1&#x27;s in the data bits is odd. Mark: parity bit is always 1. Space: Parity bit is always 0. Mark and Space Parity do not</td></tr><tr><td>Stop Bits</td><td>1, 2</td><td>Stop bits indicate the end of a serial data packet. (A start bit indicates the beginning). The standard setting is 1 stop bit. Communication with slow devices may require more than 1 stop bit.</td></tr><tr><td>Flow Control</td><td>None, Hardware RTS/CTS</td><td>Flow control can prevent data loss from buffer overflow. When sending data, if the receiving buffers are full, a &#x27;stop&#x27; signal can be sent to stop the data flow. Once the buffers are empty, a &#x27;start&#x27; signal can be sent to re-start the flow. Hardware flow control uses two wires to send start/stop</td></tr><tr><td>VT-UTF8 Combo Key Support</td><td>Disabled, Enabled</td><td>Enable VT-UTF8 Combination Key Support for ANSI/VT100 terminals</td></tr><tr><td>Recorder Mode</td><td>Disabled, Enabled</td><td>With this mode enabled only text will be sent. This is to capture Terminal data.</td></tr><tr><td>Resolution 100x31</td><td>Disabled, Enabled</td><td>Enables or disables extended terminal resolution</td></tr><tr><td>Putty KeyPad</td><td>VT100, LINUX, XTERMR6, SCO, ESCN, VT400</td><td>Select FunctionKey and KeyPad on Putty.</td></tr></table>

6.3.7 Advanced > TPM 2.0 Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td colspan="2">Firmware Version:</td><td>600.18</td></tr><tr><td colspan="2">Vendor:</td><td>INTC</td></tr><tr><td>Security Device Support</td><td>Disable, Enable</td><td>Enables or Disables BIOS support for security device.O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available.</td></tr><tr><td>Active PCR banks</td><td colspan="2"></td></tr><tr><td>Available PCR banks</td><td colspan="2"></td></tr><tr><td>SHA256 PCR Bank</td><td>Enable, Disable</td><td>Enable or Disable SHA256 PCR Bank</td></tr><tr><td>SHA384 PCR Bank</td><td>Enable, Disable</td><td>Enable or Disable SHA384 PCR Bank</td></tr><tr><td>SHA_256 PCR Bank</td><td>Enable, Disable</td><td>Enable or Disable SHA_256 PCR Bank</td></tr><tr><td>Pending operation</td><td>None, TPM Clear</td><td>Schedule an Operation for the Security Device. NOTE:Your Computer will reboot during restart in order to change State of Security Device.</td></tr><tr><td>Platform Hierarchy</td><td>Disabled, Enabled</td><td>Enable or Disable Platform Hierarchy</td></tr><tr><td>Storage Hierarchy</td><td>Disabled, Enabled</td><td>Enable or Disable Storage Hierarchy</td></tr><tr><td>Endorsement Hierarchy</td><td>Disabled, Enabled</td><td>Enable or Disable Endorsement Hierarchy</td></tr><tr><td>Physical Presence Spec Version</td><td>1.2, 1.3</td><td>Select to Tell O.S. to support PPI Spec Version 1.2 or 1.3. Note some HCK tests might not support 1.3.</td></tr><tr><td>TPM 2.0 Interface Type</td><td>CRB,TIS</td><td>Select the Communication Interface to TPM 20 Device</td></tr><tr><td>Device Select</td><td>Auto,TPM 1.2,TPM 2.0</td><td>TPM 1.2 will restrict support to TPM 1.2 devices, TPM 2.0 will restrict support to TPM 2.0 devices, Auto will support both with the default set to TPM 2.0 devices if not found, TPM 1.2 devices will be enumerated</td></tr></table>

6.3.8 Advanced > Panel Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>eDP/LVDS</td><td>Disabled, Enabled</td><td>Enable/Disable eDP/LVDS</td></tr><tr><td>LFP Panel Type</td><td>VBIOS Default, 640x480, 800x600, 1024x768, 1280x1024, 1400x1050 LVDS1, 1400x1050 LVDS2, 1600x1200, 1366x768, 1680x1050, 1920x1200, 1440x900, 1600x900, 1024x768, 1280x800, 1920x1080, 2048x1536</td><td>Select LFP panel used by Internal Graphics Device by selecting the appropriate setup item.</td></tr></table>

6.3.8.1. Advanced > Panel Configuration > NXP Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Data format and Color Depth</td><td>VESA 24 bpp, JEIDA 24 bpp, JEIDA/VESA 18 bpp</td><td>Select COM1 mode. RS232, RS422, RS485</td></tr><tr><td>LVDS Output Mode</td><td>Single LVDS bus, Dual LVDS Bus</td><td>Select data format and color depth</td></tr><tr><td>DE Polarity</td><td>Active High, Active Low</td><td>Select DE polarity</td></tr><tr><td>Vsync Polarity</td><td>Active High, Active Low</td><td>Select Vsync polarity</td></tr><tr><td>Hsync Polarity</td><td>Active High, Active Low</td><td>Select Hsync polarity</td></tr><tr><td>Spreading Depth</td><td>No Spreading, 0.5%, 1.0%, 1.5%, 2.0%, 2.5%</td><td>Select clock frequency center spreading depth.</td></tr></table>

6.3.9 Advanced > Network Stack Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Network Stack</td><td>Enable, Disable</td><td>Enable/Disable UEFI Network Stack</td></tr><tr><td>IPv4 PXE Support</td><td>Enable, Disable</td><td>Enable/Disable IPv4 PXE boot support. If disabled, IPv4 PXE boot support will not be available</td></tr><tr><td>IPv4 HTTP Support</td><td>Enable, Disable</td><td>Enable/Disable IPv4 HTTP boot support. If disabled, IPv4 HTTP boot support will not be available</td></tr><tr><td>IPv6 PXE Support</td><td>Enable, Disable</td><td>Enable/Disable IPv6 PXE boot support. If disabled, IPv6 PXE boot support will not be available</td></tr><tr><td>IPv6 HTTP Support</td><td>Enable, Disable</td><td>Enable/Disable IPv6 HTTP boot support. If disabled, IPv6 HTTP boot support will not be available</td></tr><tr><td>PXE boot wait time</td><td>0</td><td>Wait time in seconds to press ESC key to abort the PXE boot. Use either +/- or numeric keys to set the value</td></tr><tr><td>Media detect count</td><td>1</td><td>Number of times the presence of media will be checked. Use either +/- or numeric keys to set the value</td></tr></table>

# 6.4 Chipset

6.4.1 Chipset > Memory Configuration

<table><tr><td>Feature</td><td>Description</td></tr><tr><td>Memory RC Version</td><td>0.0.4.74</td></tr><tr><td>Memory Frequency</td><td>4800 MHz</td></tr><tr><td>tCL-tRCD-tRP-tRAS</td><td>40-39-39-77</td></tr><tr><td>MC 0 Ch 0 DIMM 0</td><td>Populated &amp; Enabled</td></tr><tr><td>Size</td><td>8192 MB (DDR5)</td></tr><tr><td>Number of Ranks</td><td>1</td></tr><tr><td>Manufacturer</td><td>Transcend</td></tr></table>

6.4.2 Chipset > PCI Express Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>PCI Express Root Port 3 ,4, 7, 9, 10, 11</td><td>Disabled, Enabled</td><td>Control the PCI Express Root Port.</td></tr><tr><td>PCIe Speed*</td><td>Auto, Gen1, Gen2, Gen3</td><td>Configure PCIe Speed</td></tr><tr><td>Detect Non-Compliance Device*</td><td>Disabled, Enabled</td><td>Detect Non-Compliance PCI Express Device. If enable, it will take more time at POST time.</td></tr></table>

6.4.3 Chipset > SATA Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>SATA Controller(s)</td><td>Enabled, Disabled</td><td>Enable/Disable SATA Device.</td></tr><tr><td>Serial ATA Port 1</td><td colspan="2">Empty</td></tr><tr><td>Software Preserve</td><td colspan="2">Unknown</td></tr><tr><td>Port 1</td><td>Disabled, Enabled</td><td>Enable or Disable SATA Port</td></tr></table>

6.4.4 Chipset > USB Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>USB Port Disable Override</td><td>Disabled, Select Per-Pin</td><td>Selectively Enable/Disable the corresponding USB port from reporting a Device Connection to the controller.</td></tr><tr><td>USB SS Physical Connector #0</td><td>Disabled, Enabled</td><td>Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.</td></tr><tr><td>USB HS Physical Connector #0</td><td>Disabled, Enabled</td><td>Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.</td></tr><tr><td>USB HS Physical Connector #3</td><td>Disabled, Enabled</td><td>Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.</td></tr><tr><td>USB HS Physical Connector #4</td><td>Disabled, Enabled</td><td>Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.</td></tr><tr><td>USB HS Physical Connector #5</td><td>Disabled, Enabled</td><td>Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.</td></tr><tr><td>USB HS Physical Connector #6</td><td>Disabled, Enabled</td><td>Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.</td></tr><tr><td>USB HS Physical Connector #7</td><td>Disabled, Enabled</td><td>Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.</td></tr></table>

6.4.5 Chipset > Security Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>BIOS Lock</td><td>Disabled, Enabled</td><td>Enable/Disable the PCH BIOS Lock Enable feature. Required to be enabled to ensure SMM protection of flash.</td></tr></table>

6.5 Security

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Administrator Password</td><td></td><td>Set Administrator Password</td></tr><tr><td>User Password</td><td></td><td>Set User Password</td></tr><tr><td>▶ Secure Boot Menu</td><td></td><td>Secure Boot Configuration</td></tr></table>

# 6.6 Boot

6.6.1 Boot > Boot Configuration

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Setup Prompt Timeout</td><td>[ Max-Value, Min-Value, Step-Value] = [ 0x0008, 0x0001, 0x0001]</td><td>Number of seconds to wait for setup activation key. The maximum value is 8</td></tr><tr><td>Bootup NumLock State</td><td>On, Off</td><td>Select the keyboard NumLock state</td></tr><tr><td>Quiet Boot</td><td>Disabled, Enabled</td><td>Enables or disables Quiet Boot option</td></tr><tr><td>Fast Boot</td><td>Disabled, Enabled</td><td>Enables or disables boot with initialization of a minimal set of devices required to launch active boot option. Has no effect for BBS boot option.</td></tr></table>

6.6.2 Boot > Fixed Boot Order Priorities

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Boot Option #1</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key:UEFI: SanDisk, Partition 1, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #2</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key:UEFI: SanDisk, Partition 1, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #3</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key:UEFI: SanDisk, Partition 1, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #4</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key:UEFI: SanDisk, Partition 1, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #5</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key:UEFI: SanDisk, Partition 1, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #6</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key:UEFI: SanDisk, Partition 1, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #7</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key:UEFI: SanDisk, Partition 1, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #8</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key:UEFI: SanDisk, Partition 1, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #9</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key:UEFI: SanDisk, Partition 1, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #10</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key:UEFI: SanDisk, Partition 1, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #1*</td><td>Hard Disk, Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #2*</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #3*</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #4*</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #5*</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #6*</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #7*</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #8*</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #9*</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr><tr><td>Boot Option #10*</td><td>Hard Disk, NVME, CD/DVD, SD, USB Hard Disk, USB CD/DVD, USB Key, USB Floppy, USB Lan, Network, Disabled</td><td>Sets the system boot order</td></tr></table>

6.7 Save & Exit

<table><tr><td>Feature</td><td>Option</td><td>Description</td></tr><tr><td>Save Changes and Exit</td><td></td><td>Exit system setup after saving the changes.</td></tr><tr><td>Discard Changes and Exit</td><td></td><td>Exit system setup without saving any changes.</td></tr><tr><td>Save Changes and Reset</td><td></td><td>Reset the system after saving the changes.</td></tr><tr><td>Discard Changes and Reset</td><td></td><td>Reset the system without saving any changes.</td></tr><tr><td>Save Changes</td><td></td><td>Save Changes done so far to any of the setup options.</td></tr><tr><td>Discard Changes</td><td></td><td>Discard Changes done so far to any of the setup options.</td></tr><tr><td>Restore Defaults</td><td></td><td>Restore/Load Default values for all the setup options.</td></tr><tr><td>Save as User Defaults</td><td></td><td>Save the changes done so far as User Defaults.</td></tr><tr><td>Restore User Defaults</td><td></td><td>Restore the User Defaults to all the setup options</td></tr><tr><td>Launch EFI Shell from filesystem device</td><td></td><td>Attempts to launch EFI Shell application (Shell.efi) from one of the available filesystem devices</td></tr></table>

This page intentionally left blank.

# Safety Instructions

Read and follow all instructions marked on the product and in the documentation before you operate your system. Retain all safety and operating instructions for future use.

• Please read these safety instructions carefully.
Please keep this User‘s Manual for later reference.
• Read the specifications section of this manual for detailed information on the operating environment of this equipment.
• When installing/mounting or uninstalling/removing equipment, turn off the power and unplug any power cords/cables.

• To avoid electrical shock and/or damage to equipment:

Keep equipment away from water or liquid sources.
Keep equipment away from high heat or high humidity.
 Keep equipment properly ventilated (do not block or cover ventilation openings).
 Make sure to use recommended voltage and power source settings.
 Always install and operate equipment near an easily accessible electrical socket-outlet.
Secure the power cord (do not place any object on/over the power cord).
 Only install/attach and operate equipment on stable surfaces and/or recommended mountings.
 If the equipment will not be used for long periods of time, turn off and unplug the equipment from its power source.

• Never attempt to fix the equipment. Equipment should only be serviced by qualified personnel.

# Getting Service

Ask an Expert: https://www.adlinktech.com/en/Askanexpert

# ADLINK Technology, Inc.

Address: No. 66, Huaya 1st Road, Guishan District Taoyuan City 333, Taiwan

Tel: +886-3-216-5088

Fax: +886-3-328-5723

Email: service@adlinktech.com

# Ampro ADLINK Technology, Inc.

Address: 6450 Via Del Oro, San Jose, CA 95119-1208, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

Fax: +1-408-600-1189

Email: info@adlinktech.com

# ADLINK Technology (China) Co., Ltd.

Address: 300 Fang Chun Rd., Zhangjiang Hi-Tech Park, Pudong New Area Shanghai, 201203 China

Tel: +86-21-5132-8988

Fax: +86-21-5132-3588

Email: market@adlinktech.com

# ADLINK Technology GmbH

Address: Hans-Thoma-Strasse 11, D-68163, Mannheim, Germany

Tel: +49-621-43214-0

Fax: +49-621 43214-30

Email: emea@adlinktech.com

Please visit the Contact page at www.adlinktech.com for information on how to contact the ADLINK regional office nearest you.
[🔗 Link to the original document](.sbc35-aln-50m-44840-1000-10/sbc35-aln-50m-44840-1000-10.pdf)