# SP2-AL Series

# Open-Frame Panel PC User’s Manual

![Exploded view of a computer monitor showing internal components including circuit boards and memory drives (no text or symbols visible)](.sp2-al-50m-00117-1000-10/550a549c2badc0031e49fbc871bbee44568ba1a3efcb9ba7742f1c1d104183a7.jpg)

Manual Rev.: 1.0

Revision Date: Apr. 1, 2023

Part No: 50M-00117-1000

# Revision History

<table><tr><td>Revision</td><td>Release Date</td><td>Description of Change(s)</td></tr><tr><td>1.0</td><td>2023-04-01</td><td>Initial Release</td></tr></table>

# Preface

# Copyright © 2023 ADLINK Technology Inc.

This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

# Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

# Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.

![Symbol of a trash bin crossed with a diagonal line, no text or labels present](.sp2-al-50m-00117-1000-10/14bb9446d71998382b07dbfc263959eea0363a36aa3d4d8271f5ae3b5cbae5cd.jpg)

Battery Labels (for products with battery)

![Symbol of a trash bin crossed out by two diagonal lines (no text or numbers present)](.sp2-al-50m-00117-1000-10/769b011b6b8c5793f39e43157b60351dafe97ea493d8b049068ec363c86ad2db.jpg)

![Recycling symbol icon with three chasing arrows inside a square frame (no text or labels)](.sp2-al-50m-00117-1000-10/43760e387220013555014b222ee8544db0ed25601594c68f8d605bcc17bec53b.jpg)

Li-ion

![RECYCLE\nRBRC\nLi-ion\n1.800.822.8837](.sp2-al-50m-00117-1000-10/77f4e2d89f4cac23ca85a70460e4cd5e35b5510ffa6f703dc45da531d3bf9b44.jpg)

![Abstract geometric pattern with interlocking black and white shapes (no text or symbols)](.sp2-al-50m-00117-1000-10/a194ba3eca7988b2e214ce132306bd5e4d0d6bce30579b90a70d79ef01e9b313.jpg)

ᘄ㟁ụㄳᅇᨲ

# California Proposition 65 Warning

![A yellow triangular warning sign with a black border containing a black exclamation point in the center.](.sp2-al-50m-00117-1000-10/ae0ef434187b872d7d326275c75c8c7f0c6b4521360c37be3161979ef0947bd2.jpg)

WARNING: This product can expose you to chemicals including acrylamide, arsenic, benzene, cadmium, Tris(1,3-dichloro-2-propyl) phosphate (TDCPP), 1,4- Dioxane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and vinyl materials, which are known to the State of California to cause cancer, and acrylamide, benzene, cadmium, lead, mercury, phthalates, toluene, DEHP, DIDP, DnHP, DBP, BBP, PVC, and vinyl materials, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

# Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

# Conventions

Take note of the following conventions used throughout this manual to make sure that users perform certain tasks and instructions properly.

![The image displays a white document icon featuring horizontal lines representing text. A large, bold red checkmark is overlaid on the document, slanting upwards from left to right.](.sp2-al-50m-00117-1000-10/9dea1f9ec28203909b2d6ef099d75b529e36d36cf22e341f7ee8c72a4055d0d0.jpg)
NOTE:

Additional information, aids, and tips that help users perform tasks.

![The image displays a yellow triangular warning sign with a black border. Inside the triangle is a large black exclamation mark. A horizontal black line runs across the top edge of the image, just above the triangle.](.sp2-al-50m-00117-1000-10/b6f4617f45dcb83d1089182ac2e072f08da7b2f5e892aca85a012590416bd63b.jpg)
CAUTION:

Information to prevent minor physical injury, component damage, data loss, and/or program corruption when trying to complete a task.

ATTENTION: Informations destinées à prévenir les blessures corporelles mineures, les dommages aux composants, la perte de données et/ou la corruption de programme lors de l'exécution d'une tâche.

![The image displays a red equilateral triangle pointing upward. Inside the triangle is a white exclamation point. There is a thin black horizontal line at the very top edge of the image.](.sp2-al-50m-00117-1000-10/90e911b3599113c62eebd38a53b8f96bdbae5fdf9c63994e47e7242a9d8ae7c3.jpg)
WARNING:

Information to prevent serious physical injury, component damage, data loss, and/or program corruption when trying to complete a specific task.

AVERTISSEMENT: Informations destinées à prévenir les blessures corporelles graves, les dommages aux composants, la perte de données et/ou la corruption de programme lors de l'exécution d'une tâche spécifique.

# Table of Contents

# Preface ........ iii

# List of Tables......... . vii

# List of Figures ....... ix

# 1 Introduction ........

1.1 Overview..... 1
1.2 Features... 1
1.3 Packing List .. 1
1.4 Optional Accessories . 2

# 2 Specifications ........ 3

2.1 SP2-AL Series Specifications .... 3
2.2 SP2-AL Series Block Diagram..... 5
2.3 Power.... 6
2.4 Mechanical Dimensions.... 7
2.5 Thermal Specification .... 11
2.6 Adding or Changing Memory ........ 15
2.7 Installing a WiFi/4G/5G Module .. 1 7
2.8 Mounting ...... 1 9

# 3 System Layout....... . 27

3.1 External I/O Connectors . 27
3.2 Internal I/O Connectors.... 3 3
3.3 SEMA... 5 6

# 4 Driver & Application Installation...... 57

4.1 Installing the Chipset Driver ... 5 7
4.2 Installing the Graphics Driver..... 58
4.3 Installing the Ethernet Driver .... 58

4.4 Installing the PXE Driver .. 59
4.5 Installing the Serial I/O Driver .... 59
4.6 Installing the SEMA Utility, WDT and DI/O Drivers............ 59

# A BIOS Setup ....... ..... 61

A.1 BIOS Setup Menu... . 61
A.2 Menu Structure . 63
A.3 Main Menu .... 65
A.4 Advanced Menu.. 67
A.5 Chipset.. 85
A.6 Security ...... 93
A.7 Boot ... . 94
A.8 Save & Exit ... . 95

# Important Safety Instructions...... .. 97

# Consignes de Sécurité Importante ........ 99

# EMC Compliance ....... ... 102

# Getting Service ........ .... 103

# List of Tables

Table 2-1: SP2-AL Series Specifications... 3

Table 2-2: Power Consumption ... . 6

Table 3-1: External I/O Legend.. . 27

Table 3-2: DB-9P COM Port Pin Assignment ... .. 28

Table 3-3: USB Ports Pin Assignment.. . 29

Table 3-4: DisplayPort Pin Assignment . . 30

Table 3-5: Ethernet Port Pin Definition . . 32

Table 3-6: Active/Link and Speed LED Indicators . . 32

Table 3-7: Internal I/O Legend... . 34

Table 3-8: Power Connector Pin Assignments .. .. 35

Table 3-9: SMBUS Connector Pin Assignments .. .. 36

Table 3-10: SATA Data Connector Pin Definition..... .. 37

Table 3-11: SATA Power Connector Pin Definition . . 37

Table 3-12: CMOS Jumper Pin Assignments .. . 38

Table 3-13: USB 2.0 Port Pin Assignments... . 39

Table 3-14: I2C Connector Pin Assignments.. .. 40

Table 3-15: Data Input Connector Pin Assignments.. .. 42

Table 3-16: Power & Reset Connector Pin Assignments ............ 43

Table 3-17: 2W Speaker Connector Pin Assignments ...... ... 44

Table 3-18: MIC-in & Line-out Pin Assignments... .. 45

Table 3-19: LED Indicators .. .. 46

Table 3-20: LED Connector Pin Assignments ... .. 47

Table 3-21: I2C Connector Pin Assignments.. .. 48

Table 3-22: Control Keys Connector Pin Assignments..... .... 49

Table 3-23: Debug Connector Pin Assignments... .. 50

Table 3-24: GPI/O Connector Pin Assignments . . 53

This page intentionally left blank.

# List of Figures

Figure 2-1: SP2-AL Series Block Diagram... 5

Figure 2-2: SP2-07WP-AL Dimensions . 7

Figure 2-3: SP2-10WP-AL Dimensions 8

Figure 2-4: SP2-15WP-AL Dimensions . 9

Figure 2-5: SP2-21WP-AL Dimensions . .. 10

Figure 2-6: E3930 Heat Sink Dimensions.. . 12

Figure 2-7: E3950 Heat Sink Dimensions... .. 13

Figure 2-8: SP2-7WP-AL Cutout Dimensions... .. 20

Figure 2-9: SP2-10WP-AL Cutout Dimensions.. .. 20

Figure 2-10: SP2-15WP-AL Cutout Dimensions. .. 21

Figure 2-11: SP2-21WP-AL Cutout Dimensions.. .. 21

Figure 3-1: External I/O... ... 27

Figure 3-2: DB-9P COM Port .. .. 28

Figure 3-3: USB Ports ... .. 29

Figure 3-4: Ethernet Port and LEDs... .. 31

Figure 3-5: Internal I/O (Main Board Top Side).. .. 33

Figure 3-6: Internal I/O (Main Board Underside)... .. 33

Figure 3-7: Power Connector.. . 35

Figure 3-8: SMBUS Connector ... .. 36

Figure 3-9: SATA Data Connector Pin Definition.... . 37

Figure 3-10: SATA Power Connector Pin Definition ... . 37

Figure 3-11: CMOS Jumper.... ... 38

Figure 3-12: USB 2.0 Port... ... 39

Figure 3-13: I2C Connector . .. 40

Figure 3-14: Data Input Connector . .. 41

Figure 3-15: Power & Reset Connector ... .. 43

Figure 3-16: 2W Speaker Connector .. .. 44

Figure 3-17: MIC-in & Line-out Connector .... ... 45

Figure 3-18: M.2 SSD Slot ... ... 46

Figure 3-19: LED Connector .... ... 46

Figure 3-20: I2C Connector .. .. 48

Figure 3-21: Control Keys Connector . .. 49

Figure 3-22: Debug Connector .. .. 50

Figure 3-23: GPI/O Connector .... ... 53

Figure 3-24: SIM Slot .. ... 55

This page intentionally left blank.

# 1 Introduction

# 1.1 Overview

ADLINK's SP2-AL smart panel, based on the Intel Atom® TM E3900 series (System-on-Chip) 64-bit, multi-core processor built on 14nm technology, to be paired with the Apollo Lake Platform, is an embedded open-frame panel computer meeting diverse form factors for vertical usage. The SP2-AL provides a wide range of display, touch, and I/O options to bring products to market quickly.

# 1.2 Features

 High power efficiency with Intel Atom® processor E3900 series
 Extensive I/O and function expansion through wire-to-board connectors and custom function module
Extensive expansion and customization options for fast and easy integration with all form factors, kiosks and all-in-one panel PC applications
Enhanced data integrity and protection in case of sudden power outage with support for back-up battery (optional)
 Low-risk cost-effective choice with pre-compliance EMC testing and high ESD tolerance
High applicability and reliability in case of power fluctuation with a 9-36VDC voltage range

# 1.3 Packing List

Before unpacking, check the shipping carton for any damage. If the shipping carton and/or contents are damaged, inform your dealer immediately. Retain the shipping carton and packing materials for inspection. Obtain authorization from your dealer before returning any product to ADLINK. Ensure that the following items are included in the package.

 1x SP2-AL Smart Panel

# 1.4 Optional Accessories

 Panel-mount clip kit
 VESA kit
 Rear cover
 Active heat sink
 Wi-Fi module
 60W power supply (12V/5A)
 Power cable (SP2-AL to power supply)
 Cables for internal IO expansion
 Function Modules

 SP FM
 Titan FM
 USB FM
 Railway FM

# 2 Specifications

2.1 SP2-AL Series Specifications

<table><tr><td>Model</td><td>SP2-07WP-AL</td><td>SP2-10WP-AL</td><td>SP2-15WP-AL</td><td>SP2-21WP-AL</td></tr><tr><td>Processor</td><td colspan="4">Intel Atom® x7-E3950 1.6/2.0GHz (Turbo), 12W (4C/1866) Intel Atom® x5-E3930 1.3/1.8GHz (Turbo), 6W (2C/1866)</td></tr><tr><td>Memory</td><td colspan="4">1x SODIMM socket, DDR3L 1600MHz (Up to 8GB)</td></tr><tr><td>Storage</td><td colspan="4">1x M.2 SATA 6 Gbps port, M key 2280 1x 2.5&quot; SSD/HDD SATA 6 Gbps port (optional)</td></tr><tr><td colspan="5">Display and Touch</td></tr><tr><td>Size</td><td>7&quot;</td><td>10.1&quot;</td><td>15.6&quot;</td><td>21.5&quot;</td></tr><tr><td>Resolution</td><td>1024 x 600</td><td>1280 x 800</td><td>1920 x 1080</td><td>1920 x 1080</td></tr><tr><td>Contrast Ratio</td><td>600:1</td><td>800:1</td><td>1000:1</td><td>1000:1</td></tr><tr><td>Brightness (Nits)</td><td>600 cd/m2 (typ)</td><td>400 cd/m2 (typ)</td><td>420 cd/m2 (typ)</td><td>400 cd/m2 (typ)</td></tr><tr><td>Backlight Life (Hrs)</td><td colspan="4">50,000</td></tr><tr><td>Viewing Angle (U/D/R/L)</td><td>85/85/85/85</td><td colspan="3">89/89/89/89</td></tr><tr><td>Touch Points</td><td>5 points</td><td colspan="3">10 points</td></tr><tr><td>Touch Structure</td><td colspan="4">Glass/Glass</td></tr><tr><td>Surface Hardness</td><td colspan="4">7H</td></tr><tr><td>Surface Treatment</td><td>Clear</td><td colspan="3">AS coating</td></tr><tr><td colspan="5">External I/O</td></tr><tr><td>Ethernet</td><td colspan="4">2x GbE (Intel® I225), RJ45, WOL, 1 Gb/s</td></tr><tr><td>Serial Port</td><td colspan="4">2x RS-232/422/485 programmable, auto-flow</td></tr><tr><td>USB Ports</td><td colspan="4">1x USB 2.0, Type-A, OCP, 1000mA 1x USB 3.0, Type-A, OCP, 1600mA</td></tr><tr><td>DisplayPort</td><td colspan="4">1x DP, DP++, supports resolutions up to 4096x2160@60Hz</td></tr><tr><td colspan="5">Internal I/O with Wire to Board Connectors</td></tr><tr><td>USB Port</td><td colspan="4">1x USB 2.0 client</td></tr><tr><td>I2C</td><td colspan="4">2x for I2C client</td></tr><tr><td>Audio</td><td colspan="4">1x for 2x stereo speaker (2 watts) 1x Mic-in and Line-out</td></tr><tr><td>Keys</td><td colspan="4">1x for 32 physical keys (BOM optional), 1x LCD backlight up/down and volume up/down (BOM optional)</td></tr><tr><td>GPIO</td><td colspan="4">1x 8-pin GPIO</td></tr><tr><td>mPCIe slot</td><td colspan="4">1x mPCIe slot (Wi-Fi/BT/4G)</td></tr><tr><td>SIM</td><td colspan="4">1x SIM slot for 4G/5G communication</td></tr></table>

Table 2-1: SP2-AL Series Specifications

<table><tr><td>Model</td><td>SP2-07WP-AL</td><td>SP2-10WP-AL</td><td>SP2-15WP-AL</td><td>SP2-21WP-AL</td></tr><tr><td colspan="5">Power with Wire to Board Connectors</td></tr><tr><td>Power Input</td><td colspan="4">AT/ATX (default: AT mode)12V ±5% / 9-36VDC, both with OVP/UVP protection</td></tr><tr><td>Power Connector</td><td colspan="4">1x 4-pin power connector</td></tr><tr><td>Power/Fail Reset</td><td colspan="4">1x wafer supports system reset, power button and power LED</td></tr><tr><td>Backup Battery</td><td colspan="4">1x wafer for UPS kit to back up data when AC shuts down (optional)</td></tr><tr><td colspan="5">Environmental</td></tr><tr><td>Operating Temperature</td><td colspan="3">-20°C to 60°C</td><td>0°C to 60°C</td></tr><tr><td>Storage Temperature</td><td colspan="3">-20°C to 70°C</td><td>-20°C to 60°C</td></tr><tr><td>Humidity</td><td colspan="4">Up to 95%</td></tr><tr><td>Vibration</td><td colspan="4">OP 1 Grms, 5-500Hz w/ SSD, (IEC60068-2-64) X, Y, Z axes, 60 min/axis</td></tr><tr><td>Shock</td><td colspan="4">OP 20G peak acceleration, 11 ms (IEC60068-2-64) ±X, ±Y, ±Z, 3 shocks/asix</td></tr><tr><td>IP Rating</td><td colspan="4">IP65 front panel</td></tr><tr><td>ESD</td><td colspan="4">Air: ±15kV, Contact: ±8kV</td></tr><tr><td>EMC/Safety Compliance</td><td colspan="4">EMI: IEC/EN 61000-3-2, IEC/EN 61000-3-3, EN 61000-6-4, EN 55032EMS: EN 55035, EN 61000-6-2,EMC: CE, FCC Class B, IEC 60601-1-2:2014/EN60601-1-2:2015,UNECE R10, EN 50121-3-2Safety: Compliant with 60601-1/61010-1/62368-1Note: SP2-AL has passed pre-compliance testing of EMI, EMS, EMC and Safety.</td></tr><tr><td colspan="5">Software</td></tr><tr><td>SEMA</td><td colspan="4">SEMA 4.0</td></tr><tr><td>WDT</td><td colspan="4">Watchdog Timer supported</td></tr><tr><td>Operating Systems</td><td colspan="4">Windows® 10 IoT Enterprise 64-bitLinux Ubuntu 22.04 LTS</td></tr><tr><td colspan="5">Mechanical</td></tr><tr><td>Construction</td><td colspan="4">SGCC</td></tr><tr><td>Dimensions (HxWxD)</td><td>216 x 160 x54.54 mm ±2mm</td><td>249.66 x 168.3 x64.4 ±2mm</td><td>383.56 x 232.99x 65.1 ±2mm</td><td>517.46 x 309.19x 67.6 ±2mm</td></tr><tr><td>Weight</td><td colspan="2">2.06 ±0.2kg</td><td>3.02 ±0.2kg</td><td>4.85 ±0.2kg</td></tr><tr><td>Mounting (Optional)</td><td colspan="4">1. Panel Mounting2. VESA mounting (requires optional rear cover)</td></tr></table>

Table 2-1: SP2-AL Series Specifications

2.2 SP2-AL Series Block Diagram
![Based on the provided block diagram, here is a description of the labeled blocks and their connections:\n\n**Central Processor**\n*   **Intel® Apollo Lake Processor E3950 E3930**: This large blue block is the central hub connecting to all other components.\n\n**Left Side (B2B CONN and Ethernet)**\n*   **B2B CONN** (Green block): Connected to the processor via signals **SPI**, **DDI1**, **USB2_3**, **USB2_7**, **USB2_0,USB3_0**, **USB2_2,USB3_2**, **PCIe Switch_0**, **PCIe Switch_1**, **LPC**, **I2C2, I2C5**, **SMBUS**, **I2S**, and **GPIO*6**.\n*   **RJ45** (Top): Connected via **PCIe** to **I225**, then to **0 ohm Option**, which connects back to the processor via **PCIe_2**.\n*   **RJ45** (Bottom): Connected via **PCIe** to **I225**, then to **0 ohm Option**, which connects back to the processor via **PCIe_3**.\n\n**Top Left Area (Display and BIOS)**\n*   **DP CN**: Connected via **DDI0**.\n*   **Optional eDP CN**: Connected via **eDP**.\n*   **eDP to LVDS PTN3460**: Connected via **eDP** and connects to **LVDS CN**.\n*   **Dual BIOS**: Connected via **SPI0** and connects to **DB40**.\n*   **DB40**: Connected to **Dual BIOS**.\n*   **BOM Option** (Orange block): Connected via **GSP10**.\n\n**Top Right Area (Memory, SIM, Storage)**\n*   **DDR3L SO-DIMM**: Connected via **CH0**.\n*   **eMMC**: Connected via **eMMC**.\n*   **mPCIE with Sim socket**: Connected via **PCIe4**.\n*   **PCIe switch PI7C9X2G404**: Connected via **USB2_6** and **PCIe0**.\n*   **M.2 M Key (SATA only)**: Connected via **SATA0**.\n*   **2.5' HDD**: Connected via **SATA1**.\n\n**Middle Right Area (Audio, USB, Touch Panel)**\n*   **92HD91B**: Connected via **HDA**. Connects to **SPK** (which connects to **Wafer**) and **MIC IN** (which connects to **Wafer**).\n*   **USB3.0 typeA**: Connected via **USB3_1, USB2_1**.\n*   **USB2.0 typeA**: Connected via **USB2_3**.\n*   **BOM Option** (Orange block): Connected via **USB2_4**. Connects to **PM6000**, which connects via **5-wire** to **RES touch panel** and **CAP touch panel**.\n*   **Wafer for camera module**: Connected via **USB2_5**.\n*   **Wafer for DIO board**: Connected via **I2C3**.\n*   **Wafer for IOT sensor**: Connected via **I2C6**.\n\n**Bottom Right Area (Management and Sensors)**\n*   **EC IT8528**: Connected via **LPC**. Connects to **GPIO*37** (to **Wafer**), **PWM** (to **LVDS BL CN**), and **SMBus** (to **UPS Wafer**).\n*   **TPM SLB9665**: Connected via **LPC**.\n*   **COM IC NCT5104D**: Connected via **LPC**. Connects to **SP339E** (twice), which connects to **COM 232/422/485** (twice).\n*   **BMC TI TM4C123**: Connected via **SMBUS**. Connects via **PWM** to **Thermal sensor *2** and **HW monitor**.\n*   **Wafer**: Connected via **4DO** and **4DI**.](.sp2-al-50m-00117-1000-10/2482254b2bc3452106298cc32cd9bd11a6f91ad081ee887825be3f6eca9ede54.jpg)

Figure 2-1: SP2-AL Series Block Diagram

# 2.3 Power

Power supply options:

 60W (12V/5A)
 84W (12V/7A)

# 2.3.1 DC Input Options

12V DC (default) or 9-36V DC (optional) input are supported.

# 2.3.2 Power Consumption

Power consumption is based on lab data in which 12V DC is applied and current is measured by the DC power supply. The power consumption (W) is calculated as the product of applied voltage (V) and current (A). Platforms tested for this data have available external I/O interfaces and are attached to supported devices such as keyboard/ mouse, USB dummy load, COM loopback, LAN port, and with an internal SSD drive installed. Information is presented for reference only. Actual power consumption will vary with different attached devices and operating systems.

<table><tr><td>Configuration</td><td>Idle</td><td>Full Load</td><td>Power Off</td></tr><tr><td>SP2-10WP-AL950 with USB-FM with 12V adapter</td><td>14.5 W</td><td>27.6 W</td><td>5.1 W</td></tr><tr><td>SP2-15WP-AL950 with USB-FM with 12V adapter</td><td>25.7 W</td><td>33 W</td><td>4.6 W</td></tr><tr><td>SP2-21WP-AL950 with USB-FM with 12V adapter</td><td>38.9 W</td><td>44.2 W</td><td>4.6 W</td></tr></table>

Table 2-2: Power Consumption

# 2.4 Mechanical Dimensions

![The image shows a white document icon with a folded top-right corner and horizontal black lines indicating text. A large, red checkmark is superimposed over the document.](.sp2-al-50m-00117-1000-10/7e4850efbb5d9d85c7dcabdacda38e13ffd9d2ea269251382fcdc58bfef1e59c.jpg)
NOTE:

All dimensions are in millimeters, unless noted.

# 2.4.1 SP2-07WP-AL Dimensions

![54.54\n1.74\n216\n206\n180\n28 69 91\n148\n70\nR5(X4)\n28 71 89\n130\n70\n160](.sp2-al-50m-00117-1000-10/914969ed49ea3844ef2261f8ff7744d529bd7b568b6ee97a8ae8c4c15a4d8127.jpg)

Figure 2-2: SP2-07WP-AL Dimensions

# 2.4.2 SP2-10WP-AL Dimensions

![| Dimension | Value  |\n| --------- | ------ |\n| Height    | 237.06 |\n| Width     | 16.53  |\n| Top Margin| 190    |\n| Bottom Margin| 30.53 |](.sp2-al-50m-00117-1000-10/a243ad15947b755d06cbd08cc9c468b9e3c1bc667369b301b604d729f715211e.jpg)

![249.66\n217.96\n10.1'\n136.6\n168.3](.sp2-al-50m-00117-1000-10/1fef5240e7b90e81f8190706413fd02bc1622d92f8a3dee89c6e9c2388100b57.jpg)

![64.4\n4.51\n22.5\n108.5\n19.2\n158.4\n2.55](.sp2-al-50m-00117-1000-10/6db0b0d146d43853eafa159a05d5d3c1a939abb506cf268153ce215e6400771f.jpg)

Figure 2-3: SP2-10WP-AL Dimensions

# 2.4.3 SP2-15WP-AL Dimensions

![| Dimension | Value |\n| --------- | ----- |\n| Total Length | 370.8 |\n| Height | 51.4 |\n| Width | 190 |\n| Height | 129.4 |](.sp2-al-50m-00117-1000-10/10eac47170b63edf9d56c853c7aee34c51e95f38c39bab4fd987952a836b50be.jpg)

![| Dimension | Value |\n|---|---|\n| Top Length | 383.56 |\n| Bottom Length | 345.56 |\n| Right Side Height | 194.99 |\n| Bottom Side Height | 232.99 |\n| Left Side Width | 15.6' |](.sp2-al-50m-00117-1000-10/9b53043230d178287bd64c9dd38d9d28512f8e3a9c20c57a265224c6062e5876.jpg)

![65.1\n5.2\n22.5\n20.15\n70.45\n220.6](.sp2-al-50m-00117-1000-10/9594d776dcf2257bd623760477521563ac2268dd5b5def4fb4c26bb23a4be51d.jpg)

Figure 2-4: SP2-15WP-AL Dimensions

# 2.4.4 SP2-21WP-AL Dimensions

![The image displays a technical diagram with dimension lines and measurements for a rectangular device.\n\n**Top Left:**\n*   Horizontal dimension: **504.6**\n*   Segments below: **150.3**, **190**, **164.3**\n\n**Bottom Left:**\n*   Outer horizontal dimension: **517.46**\n*   Inner horizontal dimension: **477.46**\n*   Diagonal measurement across the screen: **21.5'**\n*   Right vertical outer dimension: **309.19**\n*   Right vertical inner dimension: **269.19**\n\n**Right Side:**\n*   Top horizontal dimensions: **67.6** and **30.2**\n*   Small offset dimension: **5.2**\n*   Right vertical dimension: **296.9**\n*   Middle vertical segment: **73.45**\n*   Bottom vertical segment: **92.6**\n*   Small bottom horizontal segment: **37.4**](.sp2-al-50m-00117-1000-10/19dbd091bfe945fba277122e5ba781206f46af665ca9b5b9ca94973d50e964b5.jpg)
Figure 2-5: SP2-21WP-AL Dimensions

# 2.5 Thermal Specification

# 2.5.1 Heat Sink Specifications

Heat sink designation is based on open-frame locations such as kiosk installation. For Panel PC, design concept will differ.

<table><tr><td>CPU</td><td>CPU TDP</td><td>Part</td><td>Material</td><td>Dimensions (mm)</td><td>Remarks</td></tr><tr><td>E3930</td><td>6W</td><td rowspan="2">CPU heat sink</td><td rowspan="2">AL6063</td><td>72x67x6.01</td><td>Optional</td></tr><tr><td>E3950</td><td>12W</td><td>79x102x48.2</td><td>Optional</td></tr></table>

# 2.5.2 Heat Sink Dimensions

![The image displays an icon of a white document with its upper-right corner folded down. Faint horizontal lines run across the page, resembling text. A large, bold red checkmark is superimposed diagonally across the center of the document.](.sp2-al-50m-00117-1000-10/23728aebf5d8631226099402c4ec0c89c35a7b568819cae48e9357ddf8c4c271.jpg)
NOTE:

All dimensions are in millimeters, unless noted.

![This image is a technical engineering drawing displaying three views of a mechanical component.\n\n**Top Left View (Front Elevation):**\nThis view shows a rectangular face with vertical slats.\nText and dimensions include:\n*   **40** (top width)\n*   **29.50** (vertical offset from top)\n*   **75** (total height)\n*   **48.75** (vertical offset on the right side)\n*   **Φ 4** (diameter of a hole)\n*   **Φ 9.0** (diameter of a larger hole)\n*   **28.15** (horizontal offset)\n*   **56.29** (horizontal span)\n*   **80** (total bottom width)\n\n**Top Right View (Side Elevation):**\nThis view shows the side profile.\nText and dimensions include:\n*   **20.50**\n*   **37.50**\n\n**Bottom Left View (Detail View):**\nThis view details the fin or rib structure at the bottom.\nText and dimensions include:\n*   **25.50**\n*   **3**\n*   **3**\n*   **8.56**\n*   **3.03**\n*   **14**](.sp2-al-50m-00117-1000-10/f1c4154b3134c403107a589fa15586fdaa5b33c6cb27f98d1f777b1472e700fe.jpg)
Figure 2-6: E3930 Heat Sink Dimensions

![(143,07)\n28,15±0.15\n(27,6)\n90\n48,75±0.15\n28,75\n43,39\n56,29±0.15\nφ3\nφ4](.sp2-al-50m-00117-1000-10/ce9a1c1751d728640f11d7635c681151159cffb5638962e76948a8963abb70cb.jpg)

Figure 2-7: E3950 Heat Sink Dimensions

# 2.5.3 Routing Considerations

Cable routing should avoid high temperature areas as follows.

![1\n2\n3\nADLINK\n14 PDA\nSP-AL-M/B\nS-1021-040\n2139NB\n4.70H\n2139NB\nH0 14D](.sp2-al-50m-00117-1000-10/797a1b0ff7161847e01980115a68892f7a6df59e27f3310a3ae5ec6dbf57960a.jpg)

<table><tr><td>1</td><td>CPU</td></tr><tr><td>2</td><td>Power</td></tr><tr><td>3</td><td>Memory</td></tr></table>

# 2.6 Adding or Changing Memory

Follow these steps to add or change memory modules.

1. Remove the 3 screws that attach the heat sink to the mainboard and remove the heat sink.

![Top-down schematic of an electronic device showing CPU socket, RAM slots, and surrounding hardware (no text or labels)](.sp2-al-50m-00117-1000-10/fab3586274d34058371d4a5199fd7e1892795a4e4f9d5bbf9bfb1197b70cbe16.jpg)

2. Add or change memory modules to the SODIMM connectors as necessary.

![Top-down schematic of an electronic circuit board with internal components and a highlighted component (no text or symbols)](.sp2-al-50m-00117-1000-10/832a1689913d76defcd27088acf0844034b47b5f2661d83bec61e06c8ac5256e.jpg)

3. Reattach the heat sink to the mainboard with the previously removed screws.

# 2.7 Installing a WiFi/4G/5G Module

Follow these steps to add or change memory modules.

1. Remove the 3 screws that attach the heat sink to the mainboard and remove the heat sink.

![Top-down schematic of an electronic device showing CPU socket, RAM slots, and surrounding hardware (no text or labels)](.sp2-al-50m-00117-1000-10/765259971f7765ad7adf21dacb0cb828b35293555d6f29cff5c4d012df456aa9.jpg)

# 2. Install the WiFi/4G/5G module.

![Top-down schematic of an electronic circuit board with visible components and a highlighted PCB (no text or labels)](.sp2-al-50m-00117-1000-10/1e1621a500b8a7585177beca0091cf3b06edb8689e12bb0504050eab1c5273a3.jpg)

# 3. Reattach the heat sink to the mainboard with the previously removed screws.

![The image displays a white document icon with a folded top-right corner and faint horizontal gray lines near the bottom, overlaid with a large red checkmark.](.sp2-al-50m-00117-1000-10/e8c11015267e74b20b85f47f9ce937ae610110470349a2925a0fae8b6967389c.jpg)
NOTE:

WiFi antennas must be installed on the SP2-AL Series housing in order for WiFi/4G/5G to function properly.

# 2.8 Mounting

This section includes details for panel and VESA mounting options.

![The image features a triangular warning symbol with a red background and black border, containing a black exclamation point. Below the symbol, the text 'WARNING:' is written in black capital letters.](.sp2-al-50m-00117-1000-10/9e4ae8b9b4d66e25d3adfc1bc4403f3fb105fa07e798490c48a8b593177cfe56.jpg)

Risk of physical injuries and / or property damage:

When mounting the device, use the screws to mount the VESA bracket to the rear of the device. Tighten all four screws firmly to support the weight of the device. Make sure that the suspension system is capable of carrying the device!

![A yellow triangular warning sign with a black border containing a black exclamation point. Below the triangle is the text 'CAUTION:'.](.sp2-al-50m-00117-1000-10/86dfedf849bcafbd01a10a27af633cfbff6541f46152e81d5fa192bfbf2fc46a.jpg)

Risk of burns to the user caused by hot surfaces:

Turn off power and allow the device to cool down prior to performing any mounting or demounting operations. Do not touch the enclosure for over 10 seconds when the device is in operation or is still hot from previous use.

![The image features a graphic of a white document with horizontal lines, overlaid with a large red checkmark. Below the graphic, the text reads 'NOTE:'.](.sp2-al-50m-00117-1000-10/3bbba101190fb1fbb0edbaf6a46e59afa7865f71ed5d626fd5f2bb1164a49cb6.jpg)

All dimensions are in millimeters, unless noted.

# 2.8.1 Panel Mounting

The SP2-AL Series can be panel mounted with 10 (SP2-7WP-AL) or 14 mounting clips (optional items sold separately). Make sure there is adequate space behind the panel for ventilation, and that the panel material and thickness can support the weight of the device.

Step 1: Cut the panel opening using the appropriate cutout dimensions.

![182.6\nCUTOUT\n117](.sp2-al-50m-00117-1000-10/f6de4f5f4612616082e889634d60709be3fb74039545e40a37e856e518ff5565.jpg)

Figure 2-8: SP2-7WP-AL Cutout Dimensions

![238.06\nCUTOUT\n159.4](.sp2-al-50m-00117-1000-10/342c1ad1e52c75384d0928896255ada983ef6542ad6b774071636c3b1194c6cd.jpg)

Figure 2-9: SP2-10WP-AL Cutout Dimensions

![371.8\nCUTOUT\n221.6](.sp2-al-50m-00117-1000-10/983e6344bb70a19684c99524b6e1d84d7ed45c6bc1ba9afbb089f8a867ecdacd.jpg)

Figure 2-10: SP2-15WP-AL Cutout Dimensions

![505.6\nCUTOUT\n297.9](.sp2-al-50m-00117-1000-10/61f52e2ccf0551074e152ad69a52cd5ab0e918820a45c772e2b3c7bd98320522.jpg)

Figure 2-11: SP2-21WP-AL Cutout Dimensions

Step 2: Attach I/O cables to the device before installing into the panel if rear access will be limited after installation.

Step 3: Place the device into the panel cutout.
![Diagram showing two rectangular panels with a red arrow pointing to one panel, no text or symbols present](.sp2-al-50m-00117-1000-10/1d4df77bbb8fbd4cc186ccf7e51fce3841b0a1087c680b98f336e6524f93e315.jpg)

Step 4: Insert the mounting clips into the slots on the sides of the device as shown. Hand-tighten the mounting clips with a Phillipshead screwdriver to secure it to the panel. Do not overtighten the clips to avoid damaging the device enclosure.

![121\n121\n121\nCLIP\nHDD 100\nHDD 100\nCLIP](.sp2-al-50m-00117-1000-10/3802a05af1c6b5d672ff2c738de010ce3d063714672b95e39932ae4709f8806d.jpg)

# 2.8.2 VESA Mounting

The SP2-AL Series can be VESA mounted with a rear cover and VESA bracket. (Optional items sold separately.)

![The image depicts a white document icon with a folded upper-left corner and faint horizontal lines. A large red checkmark is overlaid on the center of the document.](.sp2-al-50m-00117-1000-10/3a440fb00a374e13f95cc77a692a40d8eea0b03cfd6159c5e6775585d0227d14.jpg)
NOTE:

All I/O ports must face down.

Step 1: Attach the rear cover to the panel PC with the screws supplied in the kit.

![Rear Cover](.sp2-al-50m-00117-1000-10/942da357ad446ec2e5ef6a4d9fc97f51d13e5433b14f1dc13db60d093c769c76.jpg)

Step 2: Attach the VESA bracket to the rear cover with the screws supplied in the kit.

![VESA Bracket](.sp2-al-50m-00117-1000-10/5159c55dfa03cd424ffda6e8cb4602c88b287ad2e68d84d00383cfd0cd92b40a.jpg)

This page intentionally left blank.

# 3 System Layout

# 3.1 External I/O Connectors

The SP2-AL Series provides the following external I/O connectors.

![A\nB C D E](.sp2-al-50m-00117-1000-10/75493597ba5c24e3ee56a98344d0868bf93c97e047de4516f8da562474dae7e7.jpg)

Figure 3-1: External I/O

<table><tr><td>A</td><td>2x DB-9P COM port supports RS-232/422/485</td></tr><tr><td>B</td><td>1x USB 2.0 Type-A</td></tr><tr><td>C</td><td>1x USB 3.0 Type-A</td></tr><tr><td>D</td><td>1X DisplayPort</td></tr><tr><td>E</td><td>2x RJ45 GbE LAN I225/I226</td></tr></table>

Table 3-1: External I/O Legend

# 3.1.1 DB-9P COM Port Connectors

Through two D-sub 9-pin connectors, COM1 or COM2 support RS-232 (default) and RS-422/RS-485 modes, by BIOS setting.

![1\n5\n6\n9](.sp2-al-50m-00117-1000-10/eeb0b54f9ce2cc183965f039d4c1344862fc25e11485bfea38e17cf87bc51efc.jpg)

Figure 3-2: DB-9P COM Port

<table><tr><td>Pin</td><td colspan="3">Signal</td></tr><tr><td></td><td>RS-232</td><td>RS-422</td><td>RS-485</td></tr><tr><td>1</td><td>DCD#</td><td>TXD422-</td><td>485-</td></tr><tr><td>2</td><td>RXD</td><td>TXD422+</td><td>485+</td></tr><tr><td>3</td><td>TXD</td><td>RXD422+</td><td>N/C</td></tr><tr><td>4</td><td>DTR#</td><td>RXD422-</td><td>N/C</td></tr><tr><td>5</td><td>GND</td><td>N/C</td><td>N/C</td></tr><tr><td>6</td><td>DSR#</td><td>N/C</td><td>N/C</td></tr><tr><td>7</td><td>RTS#</td><td>N/C</td><td>N/C</td></tr><tr><td>8</td><td>CTS#</td><td>N/C</td><td>N/C</td></tr><tr><td>9</td><td>RI#</td><td>N/C</td><td>N/C</td></tr></table>

Table 3-2: DB-9P COM Port Pin Assignment

# 3.1.2 USB 3.0 + USB 2.0 Combo Connector

![1\n2\n3\n4\n5\n6\n7\n8\n9\n10\n11\n12\n13\n1\n2\n3\n4\n5\n10\n13](.sp2-al-50m-00117-1000-10/5edb6b22b7902df7d6a61ff787d8c0699e85cbdc7a86f4ba3e2bc316c2d05afa.jpg)

Figure 3-3: USB Ports

<table><tr><td>Pin</td><td>Connector</td><td>Signal</td></tr><tr><td>1</td><td rowspan="9">USB 3.0</td><td>USB3.0_VBUS</td></tr><tr><td>2</td><td>D-</td></tr><tr><td>3</td><td>D+</td></tr><tr><td>4</td><td>GND</td></tr><tr><td>5</td><td>SSRX-</td></tr><tr><td>6</td><td>SSRX+</td></tr><tr><td>7</td><td>GND</td></tr><tr><td>8</td><td>SSTX-</td></tr><tr><td>9</td><td>SSTX+</td></tr><tr><td>10</td><td rowspan="4">USB 2.0</td><td>USB2.0_VBUS</td></tr><tr><td>11</td><td>D-</td></tr><tr><td>12</td><td>D+</td></tr><tr><td>13</td><td>GND</td></tr></table>

Table 3-3: USB Ports Pin Assignment

# 3.1.3 DisplayPort Connector

One DisplayPort connector supports the DP++ standard specification, and can connect to VGA, DVI, HDMI, and DisplayPort monitors via DisplayPort to VGA adapter cable, DisplayPort to DVI adapter cable, or DisplayPort to HDMI adapter cable and Display-Port cable, with DP1.2 support for resolutions up to 4096 x 2160 at 60Hz.

![19\n1\n20\n2](.sp2-al-50m-00117-1000-10/c78b2c2e1be5f09776104b919b1904217a318cc6252ced768f897b90dcce0aa1.jpg)

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>ML_Lane0_P</td><td>11</td><td>GND</td></tr><tr><td>2</td><td>GND</td><td>12</td><td>ML_Lane3_N</td></tr><tr><td>3</td><td>ML_Lane0_N</td><td>13</td><td>Config1</td></tr><tr><td>4</td><td>ML_Lane1_P</td><td>14</td><td>Config2</td></tr><tr><td>5</td><td>GND</td><td>15</td><td>Aux_P</td></tr><tr><td>6</td><td>ML_Lane1_N</td><td>16</td><td>GND</td></tr><tr><td>7</td><td>ML_Lane2_P</td><td>17</td><td>Aux_N</td></tr><tr><td>8</td><td>GND</td><td>18</td><td>Hot Plug</td></tr><tr><td>9</td><td>ML_Lane2_N</td><td>19</td><td>Return</td></tr><tr><td>10</td><td>ML_Lane3_P</td><td>20</td><td>DP_PWR_+3.3V</td></tr></table>

Table 3-4: DisplayPort Pin Assignment

# 3.1.4 Gigabit Ethernet Port

Two Gigabit Intel® Ethernet Controller I225 Series (V, IT or LM) RJ45 connectors support up to 1000/100/10 Mbit/s connections.

 The V version supports up to 1 GbE (without TSN, selected for a Standard Operating Temperature SKU)
 Other combinations supported on a by-project basis. Contact your ADLINK sales representative for more information.

<table><tr><td>SpeedGreen/Yellow</td><td>Active/LinkYellow</td></tr></table>

![8\n1](.sp2-al-50m-00117-1000-10/8724cdb112ca974394ef6c53d7cafa81631bc83cb0786448a5c5c4d89e42a8ab.jpg)

Figure 3-4: Ethernet Port and LEDs

<table><tr><td>LED</td><td>Color</td><td>Status</td><td>Description</td></tr><tr><td rowspan="2">Active/Link</td><td rowspan="2">Yellow</td><td>On</td><td>LAN is connected</td></tr><tr><td>Blinking</td><td>LAN is initializing</td></tr><tr><td rowspan="3">Speed</td><td>None</td><td>Off</td><td>10 Mbps</td></tr><tr><td>Green</td><td>On</td><td>100 Mbps</td></tr><tr><td>Yellow</td><td>On</td><td>1000 Mbps</td></tr></table>

Table 3-5: Active/Link and Speed LED Indicators

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>R1</td><td>L_GBE1_MDI0_P</td></tr><tr><td>R2</td><td>L_GBE1_MDI0_N</td></tr><tr><td>R3</td><td>L_GBE1_MDI1_P</td></tr><tr><td>R4</td><td>L_GBE1_MDI1_N</td></tr><tr><td>R5</td><td>Cap to GND</td></tr><tr><td>R6</td><td>Cap to GND</td></tr><tr><td>R7</td><td>L_GBE1_MDI2_P</td></tr><tr><td>R8</td><td>L_GBE1_MDI2_N</td></tr><tr><td>R9</td><td>L_GBE1_MDI3_P</td></tr><tr><td>R10</td><td>L_GBE1_MDI3_N</td></tr><tr><td>L1</td><td>L_GBE1_LED1_LINK/ACT-L</td></tr><tr><td>L2</td><td>LINK_ACT_LED</td></tr><tr><td>L3</td><td>L_GBE1_LINK100-L</td></tr><tr><td>L4</td><td>L_GBE1_LINK1000-L</td></tr><tr><td>G1</td><td>GND</td></tr><tr><td>G2</td><td>GND</td></tr></table>

Table 3-6: Ethernet Port Pin Definition

# 3.2 Internal I/O Connectors

![C\nB\nA\nD\nE\nF\nG\nH\nI\nJ\nK\nADLINK\n170 F2\n185\n2205\n470H\n2136NB\nVGA04\nCE\nH0 14D](.sp2-al-50m-00117-1000-10/f6afe8110dce4126abbea33853fb90f1fb548e8940b8b60d40ea23c87d4bf1eb.jpg)

Figure 3-5: Internal I/O (Main Board Top Side)

![P\nQ\nR\nO\nN\nM\nL](.sp2-al-50m-00117-1000-10/85e4261cc35678bbe62a6ae96832309a04dcc99ac9b113b6bf4afc42dec60d05.jpg)

Figure 3-6: Internal I/O (Main Board Underside)

<table><tr><td>A</td><td>Power connector</td></tr><tr><td>B</td><td>SMBUS connector</td></tr><tr><td>C</td><td>2.5&quot; SATA data &amp; power connectors</td></tr><tr><td>D</td><td>Mini PCIe port</td></tr><tr><td>E</td><td>CMOS jumper (JP1501)</td></tr><tr><td>F</td><td>USB 2.0</td></tr><tr><td>G</td><td> $I^{2}C$  connector</td></tr><tr><td>H</td><td>Data input keys</td></tr><tr><td>I</td><td>Power &amp; reset</td></tr><tr><td>J</td><td>2x 2W speaker (CN7)</td></tr><tr><td>K</td><td>Mic in/Line out</td></tr><tr><td>L</td><td>M.2 SSD</td></tr><tr><td>M</td><td>LED connector</td></tr><tr><td>N</td><td>I2C connector</td></tr><tr><td>O</td><td>Control keys connector</td></tr><tr><td>P</td><td>Debug connector</td></tr><tr><td>Q</td><td>GPI/O connector</td></tr><tr><td>R</td><td>SIM card slot</td></tr></table>

Table 3-7: Internal I/O Legend

# 3.2.1 Power Connector

The 4-pin power connector connects AC/DC power supply adapter, DC to DC power module and battery, with AT and ATX power modes (AT mode start is controlled by BMC).

![2\n1](.sp2-al-50m-00117-1000-10/0e20b0ed278a525042cba3b6038f9fea01bb6f027f36602333850e5cf1e4c50b.jpg)

Figure 3-7: Power Connector

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>V-</td></tr><tr><td>2</td><td>V-</td></tr><tr><td>3</td><td>V+</td></tr><tr><td>4</td><td>V+</td></tr></table>

Table 3-8: Power Connector Pin Assignments

# 3.2.2 SMBUS Connector

The SMBUS connector allows the external battery for data backup to be read. Backup time is around 10 minutes.

![Technical line drawing of an electrical connector with labeled pins (no text or symbols beyond label)](.sp2-al-50m-00117-1000-10/aca3860c272ef34c397b53ca510df34e099380631820206e638f61f6b0fe0d3f.jpg)

Figure 3-8: SMBUS Connector

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>P_+3V3_BMC_A</td></tr><tr><td>2</td><td>GND</td></tr><tr><td>3</td><td>CHG_SMBCLK</td></tr><tr><td>4</td><td>CHG_SMBDAT</td></tr><tr><td>5</td><td>SMB_ALERT-L_R</td></tr><tr><td>6</td><td>GND</td></tr><tr><td>7</td><td>GND</td></tr></table>

Table 3-9: SMBUS Connector Pin Assignments

# 3.2.3 SATA Data & Power Connectors

The SATA data and power connectors are used to connect an internal 2.5” HDD.

![The image displays a black line drawing on a white background. On the far left is the number '1'. To its right is a tall, vertical rectangular outline with rounded corners. Inside this rectangle is a long vertical slot. Within the slot, four small circles are arranged vertically along the left side. Below the circles, near the bottom, is a small filled square. On the right side of the slot is a vertical line. Horizontal lines at the top and bottom of the slot connect the inner structure to the outer walls.](.sp2-al-50m-00117-1000-10/f4ea6e6302f5f9a412fadffeca61a840f9a099c7bf1468854fb8b4e5bdce6a6a.jpg)
Figure 3-9: SATA Data Connector Pin Definition

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>GND</td></tr><tr><td>2</td><td>SATA_TX1_P</td></tr><tr><td>3</td><td>SATA_TX1_N</td></tr><tr><td>4</td><td>GND</td></tr><tr><td>5</td><td>SATA_RX1_N</td></tr><tr><td>6</td><td>SATA_RX1_P</td></tr><tr><td>7</td><td>GND</td></tr></table>

Table 3-10: SATA Data Connector Pin Definition
![The image displays a vertical line drawing of a rectangular object. On the far left, a narrow vertical strip contains four small circles arranged in a column. To the right of this strip, the main section of the object features three small circles stacked vertically above a small square. To the right of the square and the circles, the number '1' is visible.](.sp2-al-50m-00117-1000-10/450372f250dc4c5c36ab48543032d74204bfc5727df7556fa6be44bf1694beed.jpg)
Figure 3-10: SATA Power Connector Pin Definition

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>NC</td></tr><tr><td>2</td><td>GND</td></tr><tr><td>3</td><td>P_+5V_S0</td></tr><tr><td>4</td><td>GND</td></tr><tr><td>5</td><td>P_+3V3_S0</td></tr></table>

Table 3-11: SATA Power Connector Pin Definition

# 3.2.4 Mini PCIe Port

The mini PCIe port supports standard mini PCIe signals such as PCIe gen2 and USB2.0.

# 3.2.5 CMOS Jumper (JP1501)

Under conditions in which the SP2-AL fails to boot, clearing the BIOS content stored in CMOS and restoring the default settings may be effective. To clear CMOS (located at JP1501), short Pin 2 and Pin 3 and wait for 5 seconds. Remove the jumper and re-short 1 and 2. CMOS is restored to factory default settings.

![Simple diagram of a rectangular object with three square holes and an arrow pointing to one corner (no text or symbols)](.sp2-al-50m-00117-1000-10/9e95143d3aa72bccbd4b390b73e427a3bbf67bdda6b5e9406258ea052e006a25.jpg)

Figure 3-11: CMOS Jumper

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>P_+VCC_RTC_CN_A</td></tr><tr><td>2</td><td>SOC_RTC_RST-L</td></tr><tr><td>3</td><td>GND</td></tr></table>

Table 3-12: CMOS Jumper Pin Assignments

# 3.2.6 USB 2.0 Port

Supports connection to USB devices by cable.

![Diagram of an electronic component with pins and connectors, no text or symbols present](.sp2-al-50m-00117-1000-10/5fed007cf4eb159300b17dd4426073c564a78f3ef101eb8d973e962502496a3c.jpg)

Figure 3-12: USB 2.0 Port

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>P5V_U2_USB_3</td></tr><tr><td>2</td><td>CN_USB2_P3N</td></tr><tr><td>3</td><td>CN_USB2_P3P</td></tr><tr><td>4</td><td>GND</td></tr></table>

Table 3-13: USB 2.0 Port Pin Assignments

# 3.2.7 I2C Connector

The top-mounted I2C connector supports I2C clients such as IOT sensors, connected by cable.

![Pure electrical connector diagram without any text, numbers, or symbols](.sp2-al-50m-00117-1000-10/4d4ca9437f56bb464b77e5166cf5bc529195b68df8c9ccb9dad70a7ccb212daf.jpg)

Figure 3-13: $1 ^ { 2 } 0$ Connector

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>P_+5V_A</td></tr><tr><td>2</td><td>P_+3V3_A</td></tr><tr><td>3</td><td>I2C_DAT_IOT</td></tr><tr><td>4</td><td>I2C_CLK_IOT</td></tr><tr><td>5</td><td>I2C_INT_IOT</td></tr><tr><td>6</td><td>GND</td></tr></table>

Table 3-14: $1 ^ { 2 } 0$ Connector Pin Assignments

# 3.2.8 Data Input Keys

One connector supports 32 physical keys and 5 control keys, with default values of:

Direction: $\uparrow , \downarrow , \left. , \right.$

Number: 0 to 9

Function: Enter, ESC, TAB, Backspace, Delete, Clear, PagUp, PagDn

Hot keys: F1 - F10

Control: Shutdown touch screen and power off display

![39\n40\n1\n2](.sp2-al-50m-00117-1000-10/ce51e5c0e0e3d604ae0133a21009ec68c814a402a46527d6d8edededd1d930e0.jpg)

Figure 3-14: Data Input Connector

<table><tr><td>Pin</td><td>Signal</td><td>Function Value</td><td>Key Code</td><td>Pin</td><td>Signal</td><td>Function Value</td><td>Key Code</td></tr><tr><td>1</td><td>GND</td><td>N/A</td><td>N/A</td><td>2</td><td>P_+3V3_S0</td><td>N/A</td><td>N/A</td></tr><tr><td>3</td><td>EC_BTN_17</td><td>^</td><td>48h</td><td>4</td><td>EC_BTN_1</td><td>Tab</td><td>0Fh</td></tr><tr><td>5</td><td>EC_BTN_18</td><td>v</td><td>50h</td><td>6</td><td>EC_BTN_2</td><td>Backspace</td><td>0Eh</td></tr><tr><td>7</td><td>EC_BTN_19</td><td>&gt;</td><td>4Dh</td><td>8</td><td>EC_BTN_3</td><td>Delete</td><td>53h</td></tr><tr><td>9</td><td>EC_BTN_20</td><td>&lt;</td><td>4Bh</td><td>10</td><td>EC_BTN_4</td><td>Space</td><td>0x39</td></tr><tr><td>11</td><td>EC_BTN_21</td><td>0</td><td>0Bh</td><td>12</td><td>EC_BTN_5</td><td>Page up</td><td>49h</td></tr><tr><td>13</td><td>EC_BTN_22</td><td>1</td><td>02h</td><td>14</td><td>EC_BTN_6</td><td>Page down</td><td>51h</td></tr><tr><td>15</td><td>EC_BTN_23</td><td>2</td><td>03h</td><td>16</td><td>EC_BTN_7</td><td>F1</td><td>3Bh</td></tr><tr><td>17</td><td>EC_BTN_24</td><td>3</td><td>04h</td><td>18</td><td>EC_BTN_8</td><td>F2</td><td>3Ch</td></tr><tr><td>19</td><td>EC_BTN_25</td><td>4</td><td>05h</td><td>20</td><td>EC_BTN_9</td><td>F3</td><td>3Dh</td></tr><tr><td>21</td><td>EC_BTN_26</td><td>5</td><td>06h</td><td>22</td><td>EC_BTN_10</td><td>F4</td><td>3Eh</td></tr><tr><td>23</td><td>EC_BTN_27</td><td>6</td><td>07h</td><td>24</td><td>EC_BTN_11</td><td>F5</td><td>3Fh</td></tr><tr><td>25</td><td>EC_BTN_28</td><td>7</td><td>08h</td><td>26</td><td>EC_BTN_12</td><td>F6</td><td>40h</td></tr><tr><td>27</td><td>EC_BTN_29</td><td>8</td><td>09h</td><td>28</td><td>EC_BTN_13</td><td>F7</td><td>41h</td></tr><tr><td>29</td><td>EC_BTN_30</td><td>9</td><td>0Ah</td><td>30</td><td>EC_BTN_14</td><td>F8</td><td>42h</td></tr><tr><td>31</td><td>EC_BTN_31</td><td>Enter</td><td>1Ch</td><td>32</td><td>EC_BTN_15</td><td>F9</td><td>43h</td></tr><tr><td>33</td><td>EC_BTN_32</td><td>ESC</td><td>01h</td><td>34</td><td>EC_BTN_16</td><td>F10</td><td>44h</td></tr><tr><td>35</td><td>EC_BTN_37</td><td>Power</td><td>N/A</td><td>36</td><td colspan="3">N/C</td></tr><tr><td>37</td><td colspan="3">N/C</td><td>38</td><td>P_+3V3_A</td><td>N/A</td><td>N/A</td></tr><tr><td>39</td><td colspan="3">N/C</td><td>40</td><td>P_+3V3_A</td><td>N/A</td><td>N/A</td></tr><tr><td>G1</td><td>GND</td><td>N/A</td><td>N/A</td><td>G2</td><td>GND</td><td>N/A</td><td>N/A</td></tr></table>

Table 3-15: Data Input Connector Pin Assignments

# 3.2.9 Power & Reset Connector

Connects to power, reset button, and power LED via cable.

![Diagram of a connector pinout with labeled pins (no text or symbols beyond the number 1)](.sp2-al-50m-00117-1000-10/2c745bf01d7362118481e3e74d0ac3888f2b7b492183b6b2885235b5181187a8.jpg)

Figure 3-15: Power & Reset Connector

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>P_+3V3_BMC_A</td></tr><tr><td>2</td><td>PWRBTN-L_R</td></tr><tr><td>3</td><td>SYS_RESET-L_R</td></tr><tr><td>4</td><td>SIG_PWRLED-L</td></tr><tr><td>5</td><td>GND</td></tr><tr><td>6</td><td>GND</td></tr><tr><td>7</td><td>GND</td></tr></table>

Table 3-16: Power & Reset Connector Pin Assignments

# 3.2.10 2W Speaker Connectors (CN7)

Supports two 2W speakers, at CN7, connecting via cable.

![Diagram of an electrical connector with pin layout and labeled section (no text or symbols beyond label)](.sp2-al-50m-00117-1000-10/0dd8fdbd0f7a21525f5abfeba37c5bd3cce9e01c73dab368b1e3edfdf20dd784.jpg)

Figure 3-16: 2W Speaker Connector

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>SPK_LEFT_P</td></tr><tr><td>2</td><td>SPK_LEFT_N</td></tr><tr><td>3</td><td>SPK_RIGHT_P</td></tr><tr><td>4</td><td>SPK_RIGHT_N</td></tr><tr><td>5</td><td>GND</td></tr><tr><td>6</td><td>GND</td></tr></table>

Table 3-17: 2W Speaker Connector Pin Assignments

# 3.2.11 MIC-in & Line-out Connectors

Supports MIC-in and Line-out, connecting to speakers via cable.

![Diagram of an electrical connector with four slots and labeled pin 1 (no text or symbols beyond label)](.sp2-al-50m-00117-1000-10/6f1483469624ba78eab2fdea48c85402109bd2658d4a6128ff54fee16567d2b0.jpg)

Figure 3-17: MIC-in & Line-out Connector

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>EX_MIC_CN</td></tr><tr><td>2</td><td>HP_CN_L</td></tr><tr><td>3</td><td>HP_CN_R</td></tr><tr><td>4</td><td>GND</td></tr><tr><td>5</td><td>GND</td></tr><tr><td>6</td><td>GND</td></tr></table>

Table 3-18: MIC-in & Line-out Pin Assignments

# 3.2.12 M.2 SSD Slot

M.2 type is 2280 M key.

![Pure technical line drawing of a rectangular component with internal structure, no text or symbols present](.sp2-al-50m-00117-1000-10/0f8220d68a1414a1dbf6ab474c74246e041357068d0a2c75424508671a06d44f.jpg)

Figure 3-18: M.2 SSD Slot

# 3.2.13 LED Connector

Supports 10 LEDs.

<table><tr><td>Indicator</td><td>Color</td><td>Description</td></tr><tr><td>Watchdog (WDT)</td><td>Yellow</td><td>Indicates watchdog timer status. Flashes when watchdog timer starts, and when timer is expired, system will auto-reboot.</td></tr><tr><td>HDD</td><td>Red</td><td>When blinking, indicates the SATA hard driver is active</td></tr><tr><td>Standby</td><td>Blue</td><td>Indicates the system is in power standby mode</td></tr></table>

Table 3-19: LED Indicators
![Diagram of a rectangular electronic component with multiple slots and connectors (no text or symbols)](.sp2-al-50m-00117-1000-10/8c1987ce9f4466484c77b8f89240b1c00f5a7eeda8948c93e0789404442fdc5b.jpg)

Figure 3-19: LED Connector

<table><tr><td>Pin</td><td>Function</td></tr><tr><td>1</td><td>GND</td></tr><tr><td>2</td><td>STDBY_PWR</td></tr><tr><td>3</td><td>GP3_LED-L</td></tr><tr><td>4</td><td>GP2_LED-L</td></tr><tr><td>5</td><td>GP1_LED-L</td></tr><tr><td>6</td><td>P_+3V3_A</td></tr><tr><td>7</td><td>COM2_SOUT_LED_L</td></tr><tr><td>8</td><td>COM2_SIN_LED_L</td></tr><tr><td>9</td><td>COM1_SOUT_LED_L</td></tr><tr><td>10</td><td>COM1_SIN_LED_L</td></tr><tr><td>11</td><td>CN_SATALED-L</td></tr><tr><td>12</td><td>P_+3V3_S0</td></tr><tr><td>13</td><td>WDT_LED</td></tr><tr><td>14</td><td>P_+3V3_BMC_A</td></tr></table>

Table 3-20: LED Connector Pin Assignments

# 3.2.14 I2C Connector

The underside-mounted I2C connector, controlled by EC, connects to I2C clients or sensors via cable.

![Technical line drawing of an electronic component with pin layout and labeled section (no text or symbols beyond label)](.sp2-al-50m-00117-1000-10/5fb726e61eeb87af44de29800e70629db197669a8af8d2e88840a7dd2c7a0325.jpg)

Figure 3-20: I2C Connector

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>P_+5V_S0</td></tr><tr><td>2</td><td>P_+3V3_S0</td></tr><tr><td>3</td><td>I2C_DAT_DIO</td></tr><tr><td>4</td><td>I2C_CLK_DIO</td></tr><tr><td>5</td><td>I2C_INT_DIO</td></tr><tr><td>6</td><td>GND</td></tr></table>

Table 3-21: I2C Connector Pin Assignments

# 3.2.15 Control Keys Connector

A wafer expandable to a physical key controls LCD backlight and volume, connecting to the physical key via cable.

![Technical line drawing of a mechanical component with no visible text or symbols](.sp2-al-50m-00117-1000-10/bca4a7add979d94e96ecf5eb241a5511f2a15cda078fda88503b2cd940d073c3.jpg)

Figure 3-21: Control Keys Connector

<table><tr><td>Pin</td><td>Signal</td><td>Function</td></tr><tr><td>1</td><td>P_+3V3_S0</td><td>Power</td></tr><tr><td>2</td><td>EC_BTN_33</td><td>Vol_Up</td></tr><tr><td>3</td><td>EC_BTN_34</td><td>Vol_Down</td></tr><tr><td>4</td><td>EC_BTN_35</td><td>Bri_up</td></tr><tr><td>5</td><td>EC_BTN_36</td><td>Bri_Down</td></tr><tr><td>6</td><td>GND</td><td>N/A</td></tr><tr><td>7</td><td>GND</td><td>N/A</td></tr><tr><td>8</td><td>GND</td><td>N/A</td></tr></table>

Table 3-22: Control Keys Connector Pin Assignments

# 3.2.16 Debug Connector

![Diagram of a 24-pin connector with pin layout and connector pins (no text or symbols)](.sp2-al-50m-00117-1000-10/be1150c9c839328b9b00d2ab19d31ab74ce644d6ac6ebd693befddbb7fa120c9.jpg)

Figure 3-22: Debug Connector

<table><tr><td>Pin</td><td>Signal</td><td></td><td></td></tr><tr><td>1</td><td>Reserved</td><td></td><td></td></tr><tr><td>2</td><td rowspan="4">BMC debug signals</td><td>BMC_STATUS</td><td></td></tr><tr><td>3</td><td>BIOS_MODE</td><td></td></tr><tr><td>4</td><td>SYS_BIOS#</td><td>Connect to jumper for debugging</td></tr><tr><td>5</td><td>POSTWDT_DIS#</td><td>Connect to jumper for debugging</td></tr><tr><td>6</td><td rowspan="7">Test point</td><td>SUS_S5#</td><td></td></tr><tr><td>7</td><td>SUS_S4#</td><td></td></tr><tr><td>8</td><td>SUS_S3#</td><td></td></tr><tr><td>9</td><td>CB_PWROK</td><td></td></tr><tr><td>10</td><td>CB RESET #</td><td></td></tr><tr><td>11</td><td>SY_RESET#</td><td></td></tr><tr><td>12</td><td>PWRBTN#</td><td> $\Omega$ </td></tr></table>

Table 3-23: Debug Connector Pin Assignments

<table><tr><td>Pin</td><td>Signal</td><td></td><td></td></tr><tr><td>13</td><td rowspan="11">BMC Program interface</td><td>OCD0B</td><td>Includes a jumper to connect OCD0A via 1kΩ pull-up to 3.3V_BMC</td></tr><tr><td>14</td><td>OCD0A</td><td>Includes a jumper to connect OCD0A via 1kΩ pull-up to 3.3V_BMC</td></tr><tr><td>15</td><td>CLK</td><td></td></tr><tr><td>16</td><td>DATA</td><td></td></tr><tr><td>17</td><td>RESET_IN#</td><td></td></tr><tr><td>18</td><td>FUMD0</td><td></td></tr><tr><td>19</td><td>RXD6</td><td></td></tr><tr><td>20</td><td>TXD6</td><td></td></tr><tr><td>21</td><td>GND</td><td></td></tr><tr><td>22</td><td>P_+3V3_A</td><td>3.3V power continuously provided via COM module</td></tr><tr><td>23</td><td>3.3V_BMC</td><td>3.3V power continuously provided via COM module</td></tr><tr><td>24</td><td rowspan="10">LPC Bus</td><td>LPC_AD0</td><td></td></tr><tr><td>25</td><td>LPC_AD1</td><td>3.3V power continuously provided via COM module</td></tr><tr><td>26</td><td>LPC_AD2</td><td></td></tr><tr><td>27</td><td>LPC_AD3</td><td></td></tr><tr><td>28</td><td>LPC_FRAME#</td><td></td></tr><tr><td>29</td><td>CLK33_LPC</td><td></td></tr><tr><td>30</td><td>RST#</td><td>Platform reset</td></tr><tr><td>31</td><td>BIOS_DIS0</td><td></td></tr><tr><td>32</td><td>GND</td><td></td></tr><tr><td>33</td><td>3V3_LPC</td><td>System power 3.3V provided via COM module</td></tr></table>

Table 3-23: Debug Connector Pin Assignments

<table><tr><td>Pin</td><td>Signal</td><td></td><td></td></tr><tr><td>34</td><td rowspan="7">SPI program interface</td><td>SPI_BIOS_CLK</td><td></td></tr><tr><td>35</td><td>SPI_BIOS_MOSI</td><td></td></tr><tr><td>36</td><td>SPI_BIOS_MISO</td><td></td></tr><tr><td>37</td><td>SPI_BIOS_CS1#</td><td></td></tr><tr><td>38</td><td>SPI_BIOS_CS0#</td><td></td></tr><tr><td>39</td><td>GND</td><td></td></tr><tr><td>40</td><td>VCC_SPI_IN</td><td>SPI Power Input from flash tool to module. HW must add MOS FET to switch SPI power for SPI ROM</td></tr></table>

Table 3-23: Debug Connector Pin Assignments

# 3.2.17 GPI/O Connector

DC power of the GPI/O connector is 3.3V.

![Pure electrical component diagram without any text, numbers, or symbols](.sp2-al-50m-00117-1000-10/976955f2309d93514fd5a00b2cbc664f9f59ec30160740043ba0261914e698bd.jpg)

Figure 3-23: GPI/O Connector

<table><tr><td>Pin</td><td>Signal</td><td>PCH GPI/O</td><td>Default value</td><td>Input/output voltage range spec</td></tr><tr><td>1</td><td>P_+3V3_S0</td><td>N/A</td><td>N/A</td><td>N/A</td></tr><tr><td>2</td><td>GPIO_9</td><td>GPIO_9</td><td>Output High</td><td>VIH: 2.9VVIL: 0.15VVOH: 2.211VVOL: 0.55V</td></tr><tr><td>3</td><td>GPIO_21</td><td>GPIO_21</td><td>Output Low</td><td>VIH : 2.9VVIL : 0.15VVOH : 2.211VVOL : 0.55V</td></tr><tr><td>4</td><td>GPIO_23</td><td>GPIO_23</td><td>Output High</td><td>VIH : 2.9VVIL : 0.15VVOH : 2.211VVOL : 0.55V</td></tr><tr><td>5</td><td>GPIO_24</td><td>GPIO_24</td><td>Output Low</td><td>VIH : 2.9VVIL : 0.15VVOH : 2.211VVOL : 0.55V</td></tr><tr><td>6</td><td>GPIO_25</td><td>GPIO_25</td><td>Output High</td><td>VIH : 2.9VVIL : 0.15VVOH : 2.211VVOL : 0.55V</td></tr></table>

Table 3-24: GPI/O Connector Pin Assignments

<table><tr><td>Pin</td><td>Signal</td><td>PCH GPI/O</td><td>Default value</td><td>Input/output voltage range spec</td></tr><tr><td>7</td><td>GPIO_27</td><td>GPIO_27</td><td>Output Low</td><td>VIH : 2.9VVIL : 0.15VVOH : 2.211VVOL : 0.55V</td></tr><tr><td>8</td><td>GPIO_29</td><td>GPIO_29</td><td>Output High</td><td>VIH : 2.9VVIL : 0.15VVOH : 2.211VVOL : 0.55V</td></tr><tr><td>9</td><td>GPIO_30</td><td>GPIO_30</td><td>Output Low</td><td>VIH : 2.9VVIL : 0.15VVOH : 2.211VVOL : 0.55V</td></tr><tr><td>10</td><td>GND</td><td colspan="3">N/A</td></tr><tr><td>11</td><td>GND</td><td colspan="3">N/A</td></tr><tr><td>12</td><td>GND</td><td colspan="3">N/A</td></tr><tr><td>N1</td><td colspan="4">N/C</td></tr><tr><td>N2</td><td colspan="4">N/C</td></tr></table>

Table 3-24: GPI/O Connector Pin Assignments

# 3.2.18 SIM Card Slot

Supports 3G/4G LTE communication.

![Technical line drawing of a mechanical assembly with internal components and mounting brackets (no text or symbols)](.sp2-al-50m-00117-1000-10/7ac93471ac033f9767e243cf5058fec4765f47996b80141f702007fa5ad5fa7c.jpg)

Figure 3-24: SIM Slot

# 3.3 SEMA

The SEMA (Smart Embedded Management Agent) utility provides system control and failure protection, by counting, monitoring, and measuring hardware and software events.

For more information and operating instructions, please visit https://www.adlinktech.com/Products/ Industrial\_IoT\_and\_Cloud\_solutions/ SEMA\_Smart\_Embedded\_Management\_Agent/SEMA?lang=en

# 4 Driver & Application Installation

After installing the operating system, all related drivers must be installed for the system to function properly. This section describes the drivers needed for Windows operating systems and the procedures to install them. For other OS support, please contact ADLINK for further information.

Install drivers as follows.

1. Fully install Microsoft Windows OS before installing any drivers. Most standard I/O device drivers have been included in Microsoft Windows OS. For Windows 10 IoT Enterprise users, please note that you need Administrator privilege to install the drivers properly.
2. Install the chipset driver.
3. Install the graphics driver.
4. Install the Ethernet driver.
5. Install the PXE driver
6. Install the Serial I/O driver.
7. Install the SEMA utility, WDT and DI/O drivers.

# 4.1 Installing the Chipset Driver

The chipset driver directs the operating system to configure the Intel® chipset components in order to ensure that the following features function properly:

 SATA Storage Support
 USB Support
 Identification of Intel® Chipset Components in the Device Manager

Windows 10 IoT Enterprise must be fully installed and running on the system before installing this software:

To install the chipset driver for the SP2-AL

1. Close any running applications.
2. From ADLINK's website, download Windows 10 IoT Enterprise drivers for the SP2-AL.
3. Execute Setup.exe and follow onscreen instructions to complete the setup.
4. After installation is complete, reboot the system.

# 4.2 Installing the Graphics Driver

The SP2-AL is equipped with the Intel® Graphics Media Accelerator Driver package, which supports Windows 10 IoT Enterprise.

To install the graphics driver:

1. Close any running applications.
2. From ADLINK's website, download Windows 10 IoT Enterprise drivers for the SP2-AL.
3. Execute Setup.exe and follow onscreen instructions to complete the setup.
4. After installation is complete, reboot the system.

# 4.3 Installing the Ethernet Driver

To install the driver for the Intel I210 Gigabit Ethernet controller:

1. Close any running applications.
2. From ADLINK's website, download Windows 10 IoT Enterprise drivers for the SP2-AL.
3. Execute autorun.exe and follow onscreen instructions to complete the setup.
4. After installation is complete, reboot the system.

# 4.4 Installing the PXE Driver

To install the driver for the USB 3.0 controller:

1. Close any running applications.
2. From ADLINK's website, download Windows 10 IoT Enterprise drivers for the SP2-AL.
3. Launch setup.exe and follow onscreen instructions to complete the setup.
4. After installation is complete, reboot the system.

# 4.5 Installing the Serial I/O Driver

To install the driver for the I/O controller:

1. Close any running applications.
2. From ADLINK's website, download Windows 10 IoT Enterprise drivers for the SP2-AL.
3. Execute setup.msi and follow onscreen instructions to complete the setup.
4. After installation is complete, reboot the system.

# 4.6 Installing the SEMA Utility, WDT and DI/O Drivers

The SP2-AL supports ADLINK Smart Embedded Management Utility with features as follows.

 System Health for real time CPU, system temperature, total/ current uptime
 User-defined 1KB Flash
 Watchdog Timer
 Hardware Monitoring for input voltage levels and current power consumption

A WDT (watchdog timer) is a hardware mechanism resetting the system when the operating system or application is halted. A typical usage of WDT is to start the timers and periodically reset the timer, and when timer is expired, the system resets. SEMA utility installation is required to access the WDT function.

To install the SEMA utility, WDT and DI/O drivers:

1. Close any running applications.

From ADLINK's website, download Windows 10 IoT Enterprise drivers for the SP2-AL.

2. Execute Setup.exe and follow onscreen instructions to complete the setup.

After installation is complete, reboot the system.

![The image displays a graphic of a white document with a folded top-right corner and faint horizontal gray lines indicating text. A large, bold red checkmark is superimposed diagonally across the center of the document.](.sp2-al-50m-00117-1000-10/92c107e4fd73b7e34af4c8ad6c6d8af343dc5c358573d58d68921a2dd1999916.jpg)
NOTE:

Administrator privilege is required to use the API in Windows 10 IoT Enterprise.

Complete document support for SEMA utility can be found at:

http://www.adlinktech.com/PD/web/ PD\_Manual.php?PDNo=1274&Kind=M&mktg\_source=

# A BIOS Setup

The Basic Input/Output System (BIOS) is a program that provides a basic level of communication between the processor and peripherals. In addition, the BIOS also contains codes for various advanced features applied to the SP2-AL. The BIOS setup program includes menus for configuring settings and enabling features of the SP2-AL. Most users do not need to use the BIOS setup program, as the SP2-AL ships with default settings that work well for most configurations.

![The image displays a standard safety warning symbol. It features a red triangle with rounded corners containing a black exclamation point in the center. Directly beneath the triangle is the word 'WARNING' printed in black, uppercase letters.](.sp2-al-50m-00117-1000-10/44bde3463d30e6b895a57682308f5fefd62af52e127d7e70f95fbed4d8d94367.jpg)

Changing BIOS settings may lead to unexpected system behavior and the possible inability to boot.

# A.1 BIOS Setup Menu

The BIOS Setup Utility is invoked by pressing &lt;ESC&gt; or &lt;DEL&gt; when the system boots. A system reboot is required when changes are made in the BIOS Setup Utility.

The BIOS Setup Utility includes the following hotkeys.

 &lt;F1&gt;: General help
 &lt;F8&gt;: Load previous BIOS values
 &lt;F9&gt;: Load BIOS default values
 &lt;F10&gt;: Save & Exit the Setup Utility

# Menu Selection Bar

The Menu Selection Bar is located at the top of the screen. It displays the top level menus available to the user.

 Main Menu
 Advanced Menu
 Chipset Menu
 Security Menu
 Boot Menu
 Save & Exit Menu

# Menu Conventions

The appearance of the setup menus and items listed in this chapter are based on a VT100 terminal connection via serial console with the following menu conventions.

 Using color

The default BIOS setup fields are black. The BIOS setup fields currently not used are grey. The display strings are black.

 Using brackets

Editable menu options are marketed with square brackets, ‘[‘ and ‘]’.

# A.2 Menu Structure

This section presents the six primary menus of the BIOS Setup Utility. Use the following tables as a quick reference for the contents of the BIOS Setup Utility. The remainder of this chapter describe the submenus and options for each menu item. The default settings are presented in bold, and the function of each setting is described in the right hand column of the table.

<table><tr><td>Main</td><td>Advanced</td></tr><tr><td>- BIOS Information- System Information- Board Information</td><td>- CPU Configuration ▶- Graphics Configuration ▶- Power Management ▶- System Management ▶- Thermal Management ▶- Watchdog Timer ▶- Super IO Configuration ▶- Serial Console Redirection ▶- Network Stack Configuration ▶- Trusted Computing ▶- USB Configuration ▶</td></tr></table>

<table><tr><td>Chipset</td><td>Security</td></tr><tr><td>- North Bridge- South Bridge- Uncore Configuration- South Cluster Configuration</td><td>- Secure Boot menu</td></tr><tr><td>Boot</td><td>Save &amp; Exit</td></tr><tr><td>- Boot Configuration- UEFI Hard Disk Drive BBS Priorities- UEFI NVME Drive BBS Priorities- UEFI CDROM/DVD Drive BBS Priorities- UEFI SD Drive BBS Priorities- UEFI USB Hard Disk Drive BBS Priorities- UEFI USB CDROM/DVD Drive BBS Priorities- UEFI USB Key Drive BBS Priorities- UEFI USB Floppy Drive BBS Priorities- UEFI USB Lan Drive BBS Priorities- UEFI NETWORK Drive BBS Priorities</td><td>- Save Changes and Exit- Discard Changes and Exit- Save Changes and Reset- Discard Changes and Reset- Save Options- Save Changes- Discard Changes- Restore Defaults- Save as User Defaults- Restore User Defaults- Boot Override- Launch EFI Shell from filesystem device</td></tr></table>

![The image displays a white document icon featuring a folded top-right corner and faint horizontal lines. A large, bold red checkmark is superimposed over the center of the document. The entire graphic is enclosed within a thin black square border.](.sp2-al-50m-00117-1000-10/a8530fe35ada7c0fcbb83d646408a3a832c955f3eebc7bceb52c76ae3cf8d955.jpg)
NOTE:

- ► indicates a submenu
- Gray text indicates info only
- Bold text indicates a default setting

# A.3 Main Menu

This menu provides read-only information about your system and also allows you to set the System Date and Time. Refer to the tables below for details of the submenus and settings.

A.3.1 Main

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td colspan="3">BIOS Information</td></tr><tr><td>BIOS Vendor</td><td>American Megatrends</td><td>BIOS Vendor</td></tr><tr><td>BIOS Version</td><td>Info only</td><td>BIOS Version.</td></tr><tr><td>Build Date</td><td>Info only</td><td>BIOS build date</td></tr><tr><td>MRC Version</td><td>Info only</td><td>MRC Version</td></tr><tr><td>GOP Version</td><td>Info only</td><td>GOP Version</td></tr><tr><td>TXE FW Version</td><td>Info only</td><td>TXE FW Version</td></tr><tr><td>BIOS Boot Source</td><td>Primary BIOS</td><td>BIOS Boot Source</td></tr><tr><td colspan="3">System Information</td></tr><tr><td>Project Name</td><td>SP-AL</td><td>Project Name</td></tr><tr><td>CPU Board Version</td><td>Info only</td><td>CPU Board Version</td></tr><tr><td>CPU Brand String</td><td>Info only</td><td>CPU Brand String</td></tr><tr><td>CPU Frequency</td><td>Info only</td><td>CPU Frequency</td></tr><tr><td>Total Memory</td><td>Info only</td><td>Total Memory</td></tr><tr><td>Memory Frequency</td><td>Info only</td><td>Memory Frequency</td></tr><tr><td>PCH SKU</td><td>Info only</td><td>PCH SKU</td></tr><tr><td>FM Board</td><td>Info only</td><td>FM Board</td></tr><tr><td colspan="3">Board Information</td></tr><tr><td>Access Level</td><td>Info only</td><td>User Access Level</td></tr><tr><td>Access Level</td><td>Info only</td><td>AdministratorAccess Level</td></tr></table>

# A.3.2 Main > Board Information

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Serial Number</td><td>Info only</td><td>Serial Number</td></tr><tr><td>Manufacturing Date</td><td>Info only</td><td>Manufacturing Date</td></tr><tr><td>Last Repair Date</td><td>Info only</td><td>Last Repair Date</td></tr><tr><td colspan="3">Runtime Statistics</td></tr><tr><td>Total Runtime</td><td>Info only</td><td>Total Runtime</td></tr><tr><td>Current Runtime</td><td>Info only</td><td>Current Runtime</td></tr><tr><td>Power Cycles</td><td>Info only</td><td>Power Cycles</td></tr><tr><td>Boot Cycles</td><td>Info only</td><td>Boot Cycles</td></tr><tr><td>Boot Reason</td><td>Info only</td><td>Boot Reason</td></tr></table>

# A.4 Advanced Menu

This menu contains the settings for most of the user interfaces in the system.

A.4.1 Advanced > CPU Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td colspan="3">Intel(R) Atom(TM) Processor (Info only)</td></tr><tr><td>CPU Signature</td><td>Info only</td><td>Displays the CPU Signature</td></tr><tr><td>Microcode Patch</td><td>Info only</td><td>Displays the Microcode Patch version</td></tr><tr><td>Max CPU Speed</td><td>Info only</td><td>Displays the Max CPU Speed</td></tr><tr><td>Min CPU Speed</td><td>Info only</td><td>Displays the Min CPU Speed</td></tr><tr><td>Processor Cores</td><td>Info only</td><td>Displays the number of Processor cores</td></tr><tr><td>Intel HT Technology</td><td>Info only</td><td>Intel HT Technology</td></tr><tr><td>Intel VT-x Technology</td><td>Info only</td><td>Intel VT-x Technology</td></tr><tr><td>L1 Data Cache</td><td>Info only</td><td>Displays the Processor L1 Data Cache size.</td></tr><tr><td>L1 Code Cache</td><td>Info only</td><td>Displays the Processor L1 Code Cache size.</td></tr><tr><td>L2 Cache</td><td>Info only</td><td>Displays the Processor L2 Cache size.</td></tr><tr><td>L3 Cache</td><td>Info only</td><td>Displays the Processor L3 Cache size.</td></tr><tr><td>L4 Cache</td><td>Info only</td><td>Displays the Processor L4 eDRAM size.</td></tr><tr><td>EIST</td><td>Disabled Enabled</td><td>Enhanced Intel® Speedstep technology allows the processor to dynamically adjust frequency and voltage based on power versus performance needs.</td></tr><tr><td>Turbo Mode</td><td>Disabled Enabled</td><td>Enables/Disables processor Turbo Mode.</td></tr><tr><td>Intel Virtualization Technology</td><td>Disabled Enabled</td><td>When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology.</td></tr><tr><td>VT-d</td><td>Disabled Enabled</td><td>Enables/Disables CPU VT-d</td></tr><tr><td>C states</td><td>Disabled Enabled</td><td>Enables/Disables CPU Power Management. Allows CPU to go to C states when not 100% utilized.</td></tr><tr><td>Enhanced C-states</td><td>Disabled Enabled</td><td>Enables/Disables C1E. When enabled, CPU will switch to minimum speed when all cores enter C-State.</td></tr><tr><td>Max Package C State</td><td>PC2PC1C0</td><td>Controls the Max Package C State that the processor will support.</td></tr><tr><td>Max Core C State</td><td>Core C6Core C1Unlimited</td><td>This option controls the Max Core C State that cores will support.</td></tr><tr><td>C-State Auto Demotion</td><td>Disabled C1</td><td>Configure C-State Auto Demotion</td></tr><tr><td>C-State Un-demotion</td><td>Disabled C1</td><td>Configure C-State Un-demotion</td></tr><tr><td>DTS</td><td>Disabled Enabled</td><td>Enables/Disables Digital Thermal Sensor.</td></tr></table>

A.4.2 Advanced > Graphics Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td colspan="3">Graphics Configuration</td></tr><tr><td>FM Display Type</td><td>No DeviceDisplay PortHDMIDisplayPort with HDMI/DVI Compatible</td><td>FM display type switch</td></tr><tr><td colspan="3">For LVDS Only</td></tr><tr><td>Data format and Color Depth</td><td>AutoVESA 24 bppJEIDA 24 bppJEIDA/vesa 18 bpp</td><td>Data format and Color Depth select</td></tr><tr><td>LVDS Output Mode</td><td>AutoDual LVDS busSingle LVDS bus</td><td>Single/Dual mode select</td></tr><tr><td>DE Polarity</td><td>Active HighActive Low</td><td>DE Polarity select</td></tr><tr><td>Vsync Polarity</td><td>Active HighActive Low</td><td>Vsync Polarity select</td></tr><tr><td>Hsync Polarity</td><td>Active HighActive Low</td><td>Hsync Polarity select</td></tr><tr><td>Spreading depth</td><td>No Spreading0.5%1.0%1.5%2.0%2.5%</td><td>Clock frequency centerspreading depth.</td></tr><tr><td colspan="3">For eDP/LVDS</td></tr><tr><td>LFP Panel Type</td><td>Auto640x480800x6001024x7681280x10241400x10501024x6001600x12001366x7681680x10501920x12001440x9001600x9001280x8001920x10802048x1536</td><td>Select LFP panel used byInternal Graphics Device byselecting the appropriatesetup item.</td></tr></table>

A.4.3 Advanced > Power Management

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Enable ACPI Auto Configuration</td><td>DisabledEnabled</td><td>Enables/Disables BIOS ACPI Auto Configuration.</td></tr><tr><td>Enable Hibernation</td><td>DisabledEnabled</td><td>Enables/Disables System ability to Hibernate (OS/S4 Sleep State). This option may not be effective with some operating systems.</td></tr><tr><td>ACPI Sleep State</td><td>Suspend Disabled S3 (Suspend to RAM)</td><td>Select the highest ACPI sleep state the system will enter when the SUSPEND button is pressed.</td></tr><tr><td>Lock Legacy Resources</td><td>DisabledEnabled</td><td>Enables/Disables Lock of Legacy Resources</td></tr><tr><td>mPCIe Slot Wake</td><td>DisabledEnabled</td><td>Enables/Disables PCI Express Slot wake capability</td></tr><tr><td>RTC Wake system from S5</td><td>DisabledFixed TimeDynamic Time</td><td>Enables/Disables System wake on alarm event.Select FixedTime, system will wake on the hr::min::sec specified.Select DynamicTime, System will wake on the current time + Increase minute(s)</td></tr><tr><td>Wake up hour</td><td>[ Max-Value, Min-Value, Step-Value] = [ 0x17, 0x00, 0x01]</td><td>Range: 0-23 hr</td></tr><tr><td>Wake up minute</td><td>[ Max-Value, Min-Value, Step-Value] = [ 0x3B, 0x00, 0x01]</td><td>Range: 0-59 min</td></tr><tr><td>Wake up second</td><td>[ Max-Value, Min-Value, Step-Value] = [ 0x3B, 0x00, 0x01]</td><td>Range: 0-59 sec</td></tr><tr><td>Wake up minute increase</td><td>[ Max-Value, Min-Value, Step-Value] = [ 0x05, 0x01, 0x01]</td><td>Range: 1-5 min</td></tr><tr><td>Backup Battery Function</td><td>Disabled Enabled</td><td>Enables/Disables backup battery function.</td></tr><tr><td>Emulation AT/ATX</td><td>Emulation AT ATX</td><td>Select Emulation AT or ATX function. If this option is set to [Emulation AT], BIOS will report no suspend functions to ACPI OS. On Windows XP, the OS will show a shutdown message during system shutdown.</td></tr></table>

A.4.4 Advanced > Power Management > Power Consumption

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Power Consumption</td><td>Info only</td><td></td></tr><tr><td>Current Input Current</td><td>Info only</td><td></td></tr><tr><td>Current Input Power</td><td>Info only</td><td></td></tr><tr><td>CPU-Vcore</td><td>Info only</td><td></td></tr><tr><td>VGFX</td><td>Info only</td><td></td></tr><tr><td>V1P05S</td><td>Info only</td><td></td></tr><tr><td>VMEM</td><td>Info only</td><td></td></tr><tr><td>VIN(12V)</td><td>Info only</td><td></td></tr><tr><td>V5SBY</td><td>Info only</td><td></td></tr><tr><td>V5S</td><td>Info only</td><td></td></tr><tr><td>P_+3V3_A</td><td>Info only</td><td></td></tr><tr><td>P_+3V3_S</td><td>Info only</td><td></td></tr><tr><td>VRTC</td><td>Info only</td><td></td></tr><tr><td>P_+1V24_S</td><td>Info only</td><td></td></tr><tr><td>P_+1V8_S</td><td>Info only</td><td></td></tr></table>

# A.4.5 Advanced > System Management

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>SEMA Firmware</td><td>Info only</td><td></td></tr><tr><td>Build Date</td><td>Info only</td><td></td></tr><tr><td>SEMA Bootloader</td><td>Info only</td><td></td></tr><tr><td>Build Date</td><td>Info only</td><td></td></tr></table>

# A.4.6 Advanced > System Management > SEMA Features

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>SEMA Supported Features</td><td>Info only</td><td></td></tr><tr><td>Uptime &amp; Power Cycles Counter</td><td>Info only</td><td></td></tr><tr><td>System Restart Event</td><td>Info only</td><td></td></tr><tr><td>512 Bytes User-Flash</td><td>Info only</td><td></td></tr><tr><td>1024 Bytes User-Flash</td><td>Info only</td><td></td></tr><tr><td>Watchdog</td><td>Info only</td><td></td></tr><tr><td>Temperatures</td><td>Info only</td><td></td></tr><tr><td>Voltage Monitor</td><td>Info only</td><td></td></tr><tr><td>Power-Up Watchdog</td><td>Info only</td><td></td></tr><tr><td>Power Monitor (current sense)</td><td>Info only</td><td></td></tr><tr><td>Boot Counter</td><td>Info only</td><td></td></tr><tr><td>I2C bus 2</td><td>Info only</td><td></td></tr><tr><td>System Fan 1</td><td>Info only</td><td></td></tr><tr><td>ACPI Thermal Trigger</td><td>Info only</td><td></td></tr><tr><td>DTS register available</td><td>Info only</td><td></td></tr><tr><td>TIVA BMC</td><td>Info only</td><td></td></tr><tr><td>SEMA Error Log</td><td>Info only</td><td></td></tr></table>

A.4.7 Advanced > System Management > Flags

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>BMC Flags</td><td>Info only</td><td></td></tr><tr><td>BIOS Select</td><td>Info only</td><td></td></tr><tr><td>ATX/AT-Mode</td><td>Info only</td><td></td></tr><tr><td>Exception Code</td><td>Info only</td><td></td></tr></table>

A.4.8 Advanced > System Management $> \mathbb { S } E M A > { \mathsf { T e m } } -$ perature

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td colspan="3">CPU Temperature</td></tr><tr><td>Current</td><td>Info only</td><td></td></tr><tr><td>Startup</td><td>Info only</td><td></td></tr><tr><td>Min</td><td>Info only</td><td></td></tr><tr><td>Max</td><td>Info only</td><td></td></tr><tr><td colspan="3">Board Temperatures</td></tr><tr><td>Current</td><td>Info only</td><td></td></tr><tr><td>Startup</td><td>Info only</td><td></td></tr><tr><td>Min</td><td>Info only</td><td></td></tr><tr><td>Max</td><td>Info only</td><td></td></tr><tr><td colspan="3">Board Temperatures</td></tr><tr><td>Current</td><td>Info only</td><td></td></tr><tr><td>Startup</td><td>Info only</td><td></td></tr><tr><td>Min</td><td>Info only</td><td></td></tr><tr><td>Max</td><td>Info only</td><td></td></tr><tr><td>CPU Fan Speed</td><td>Info only</td><td></td></tr><tr><td colspan="3">Smart Fan</td></tr><tr><td>Critical Trip Point</td><td>Disabled70 C80 C90 C</td><td>This value is the temperature threshold of the Critical Trip Point.</td></tr><tr><td>Passive Cooling Trip Point</td><td>Disabled60 C70 C80 C</td><td>This value is the temperature threshold of the Passive Cooling Trip Point.</td></tr></table>

# A.4.9 Advanced > Watchdog Timer

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Power-Up Watchdog</td><td>Disabled Enabled</td><td>Enbles/Disables the Watchdog Timer</td></tr><tr><td>Timeout</td><td>[Max-Value, Min-Value, Step-Value] = [0xFFFF, 0x0018, 0x0001]</td><td>The time the Power Up Watchdog should wait until it resets the system.</td></tr><tr><td colspan="3">ATTENTION: Pressing F12 during start up disables the Power Up Watchdog.</td></tr><tr><td>RunTime Watchdog</td><td>Disabled Enabled</td><td>The RunTime Watchdog resets the system after a certain amount of time after power up.</td></tr><tr><td>Timeout</td><td>[Max-Value, Min-Value, Step-Value] = [0xFFFF, 0x0018, 0x0001]</td><td>The time the Power Up Watchdog should wait until it resets the system.</td></tr></table>

# A.4.10 Advanced > Super IO Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Super IO Chip</td><td>Info only</td><td></td></tr></table>

A.4.11 Advanced > Super IO Configuration > Serial Port 1 Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Serial Port</td><td>DisabledEnabled</td><td>Enables/Disables the serial port (COM)</td></tr><tr><td>Device Settings</td><td>IO=3F8; IRQ=4</td><td></td></tr><tr><td>Change Settings</td><td>AutoIO=3F8h; IRQ=4IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12</td><td>Selects optimal settings for Super IO Device</td></tr><tr><td>COM1 Control</td><td>RS232RS422RS485</td><td>Sets COM1 mode as RS-232, RS-422 or RS-485</td></tr></table>

A.4.12 Advanced > Super IO Configuration > Serial Port 2 Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Serial Port</td><td>DisabledEnabled</td><td>Enables/Disables the serial port (COM)</td></tr><tr><td>Device Settings</td><td>IO=2F8; IRQ=3</td><td></td></tr><tr><td>Change Settings</td><td>AutoIO=2F8h; IRQ=3IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12</td><td>Selects optimal settings for Super IO Device</td></tr><tr><td>COM2 Control</td><td>RS232RS422RS485</td><td>Sets COM2 mode as RS-232, RS-422 or RS-485</td></tr></table>

A.4.13 Advanced > Super IO Configuration > Serial Port 3 Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Serial Port</td><td>DisabledEnabled</td><td>Enables/Disables the serial port (COM)</td></tr><tr><td>Device Settings</td><td>Reset Required</td><td></td></tr><tr><td>Change Settings</td><td>AutoIO=3E8h; IRQ=7IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12IO=220h; IRQ=3,4,5,6,7,9,10,11,12IO=228h; IRQ=3,4,5,6,7,9,10,11,12</td><td>Selects optimal settings for Super IO Device</td></tr></table>

A.4.14 Advanced > Super IO Configuration > Serial Port 4 Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Serial Port</td><td>DisabledEnabled</td><td>Enables/Disables the serial port (COM)</td></tr><tr><td>Device Settings</td><td>Reset Required</td><td></td></tr><tr><td>Change Settings</td><td>AutoIO=3E8h; IRQ=7IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12IO=220h; IRQ=3,4,5,6,7,9,10,11,12IO=228h; IRQ=3,4,5,6,7,9,10,11,12</td><td>Selects optimal settings for Super IO Device</td></tr></table>

A.4.15 Advanced > Serial Console Redirection

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>COM0</td><td></td><td></td></tr><tr><td>Console Redirection</td><td>Disabled Enabled</td><td>Enables/Disables console redirection on COM0 port.</td></tr><tr><td>COM1</td><td></td><td></td></tr><tr><td>Console Redirection</td><td>Disabled Enabled</td><td>Enables/Disables console redirection on COM1 port.</td></tr></table>

A.4.16 Advanced > Console Redirection > COM 0 > Console Redirection Settings

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Terminal Type</td><td>VT100VT100PlusVT-UTF8ANSI</td><td>Emulation:ANSI: Extended ASCII character set.VT100: ASCII character set.VT100Plus: Extends VT100 to support color, function keys, etc.VT-UTF8: Uses UTF8 encoding to map Unicode chars onto 1 or more bytes.</td></tr><tr><td>Bits per second</td><td>9600192003840057600115200</td><td>Selects serial port transmission speed.The speed must be matched on both connected systems. Long or noisy lines may require lower speeds.</td></tr><tr><td>Data Bits</td><td>78</td><td>Data Bits.</td></tr><tr><td>Parity</td><td>NoneEvenOddMarkSpace</td><td>A parity bit can be sent with the data bits to detect some transmission errors.Even: parity bit is 0 if the num of 1's in the data bits is even.Odd: parity bit is 0 if num of 1's in the data bits is odd.Mark: parity bit is always 1.Space: Parity bit is always 0.Mark and Space Parity do not allow for error detection. They can be used as an additional data bit.</td></tr><tr><td>Stop Bits</td><td>12</td><td>Stop bits indicate the end of a serial data packet. (A start bit indicates the beginning). The standard setting is 1 stop bit. Communication with slow devices may require more than 1 stop bit.</td></tr><tr><td>Flow Control</td><td>NoneHardwareRTS/CTS</td><td>Flow control can prevent data loss from buffer overflow. When sending data, if the receiving buffers are full, a 'stop' signal can be sent to stop the data flow. Once the buffers are empty, a 'start' signal can be sent to re-start the flow. Hardware flow control uses two wires to send start/stop</td></tr><tr><td>VT-UTF8 Combo Key Support</td><td>DisabledEnabled</td><td>Enable VT-UTF8 Combination Key Support for ANSI/VT100 terminals</td></tr><tr><td>Recorder Mode</td><td>DisabledEnabled</td><td>With this mode enabled only text will be sent. This is to capture Terminal data.</td></tr><tr><td>Resolution 100x31</td><td>DisabledEnabled</td><td>Enables/Disables extended terminal resolution</td></tr><tr><td>Putty KeyPad</td><td>VT100LINUXXTERMR6SCOESCNVT400</td><td>Select FunctionKey and KeyPad on Putty.</td></tr></table>

A.4.17 Advanced > Console Redirection > COM 1 > Console Redirection Settings

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Terminal Type</td><td>VT100VT100PlusVT-UTF8ANSI</td><td>Emulation:ANSI: Extended ASCII character set.VT100: ASCII character set.VT100Plus: Extends VT100 to support color, function keys, etc.VT-UTF8: Uses UTF8 encoding to map Unicode chars onto 1 or more bytes.</td></tr><tr><td>Bits per second</td><td>9600192003840057600115200</td><td>Selects serial port transmission speed.The speed must be matched on both connected systems. Long or noisy lines may require lower speeds.</td></tr><tr><td>Data Bits</td><td>78</td><td>Data Bits.</td></tr><tr><td>Parity</td><td>NoneEvenOddMarkSpace</td><td>A parity bit can be sent with the data bits to detect some transmission errors.Even: parity bit is 0 if the num of 1's in the data bits is even.Odd: parity bit is 0 if num of 1's in the data bits is odd.Mark: parity bit is always 1.Space: Parity bit is always 0.Mark and Space Parity do not allow for error detection. They can be used as an additional data bit.</td></tr><tr><td>Stop Bits</td><td>12</td><td>Stop bits indicate the end of a serial data packet. (A start bit indicates the beginning). The standard setting is 1 stop bit. Communication with slow devices may require more than 1 stop bit.</td></tr><tr><td>Flow Control</td><td>NoneHardwareRTS/CTS</td><td>Flow control can prevent data loss from buffer overflow. When sending data, if the receiving buffers are full, a 'stop' signal can be sent to stop the data flow.Once the buffers are empty, a 'start' signal can be sent to re-start the flow.Hardware flow control uses two wires to send start/stop</td></tr><tr><td>VT-UTF8 Combo Key Support</td><td>DisabledEnabled</td><td>Enable VT-UTF8 Combination KeySupport for ANSI/VT100 terminals</td></tr><tr><td>Recorder Mode</td><td>DisabledEnabled</td><td>With this mode enabled only text will be sent. This is to capture Terminal data.</td></tr><tr><td>Resolution 100x31</td><td>DisabledEnabled</td><td>Enables/Disables extended terminal resolution</td></tr><tr><td>Putty KeyPad</td><td>VT100LINUXXTERMR6SCOESCNVT400</td><td>Select FunctionKey and KeyPad on Putty.</td></tr></table>

# A.4.18 Advanced > Miscellaneous > Network Stack Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Network Stack</td><td>Disabled Enabled</td><td>Enables/Disables UEFI Network Stack</td></tr><tr><td>Ipv4 PXE Support</td><td>Disabled Enabled</td><td>Enables/Disables IPv4 PXE boot support. If disabled, IPv4 PXE boot support will not be available.</td></tr><tr><td>Ipv6 PXE Support</td><td>Disabled Enabled</td><td>Enables/Disables IPv6 PXE boot support. If disabled, IPv6 PXE boot support will not be available.</td></tr><tr><td>PXE boot wait time</td><td>[Max-Value, Min-Value, Step-Value] = [0x05, 0x00, 0x01]</td><td>Wait time in seconds to press ESC key to abort PXE boot. Use either +/- or numeric keys to set the value.</td></tr></table>

# A.4.19 Advanced > Trusted Computing > TPM 1.2 Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Configuration</td><td>Info only</td><td></td></tr><tr><td>Security Device Support</td><td>Disabled Enabled</td><td>Enables/Disables BIOS support for security device. OS will not show Security Device. TCG EFI protocol and INT1A interface will not be available.</td></tr><tr><td>TPM State</td><td>Disabled Enabled</td><td>Enables/Disables Security Device. The computer will reboot in order to change State of the Device.</td></tr><tr><td>Pending Operation</td><td>None TPM Clear</td><td>Schedule an Operation for the Security Device. The computer will reboot in order to change State of the Device.</td></tr><tr><td>Security Device Support</td><td>Disabled Enabled</td><td>Enables/Disables BIOS support for security device. OS will not show Security Device. TCG EFI protocol and INT1A interface will not be available.</td></tr><tr><td>TCM State</td><td>Disabled Enabled</td><td>Enables/Disables Security Device. The computer will reboot in order to change State of the Device.</td></tr><tr><td>Pending Operation</td><td>None TPM Clear</td><td>Schedule an Operation for the Security Device. The computer will reboot in order to change State of the Device.</td></tr><tr><td>Device Select</td><td>TPM 1.2 TPM 2.0 Auto</td><td>TPM 1.2 will restrict support to TPM 1.2 devices, TPM 2.0 will restrict support to TPM 2.0 devices, Auto will support both with the default set to TPM 2.0 devices if not found, TPM 1.2 devices will be enumerated</td></tr><tr><td>Current Information</td><td>Info only</td><td></td></tr><tr><td>TPM Enabled Status</td><td>N/A, reset required</td><td></td></tr><tr><td>TPM Active Status</td><td>N/A, reset required</td><td></td></tr><tr><td>TPM Owner Status</td><td>N/A, reset required</td><td></td></tr><tr><td>TPM Enabled Status</td><td>N/A, reset required</td><td></td></tr><tr><td>TPM Active Status</td><td>N/A, reset required</td><td></td></tr><tr><td>TPM Owner Status</td><td>N/A, reset required</td><td></td></tr></table>

A.4.20 Advanced > TPM 2.0 Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td colspan="3">TPM 2.0 Device Found</td></tr><tr><td>Security Device Support</td><td>Disabled Enabled</td><td>Enables/Disables BIOS support for security device. OS will not show Security Device. TCG EFI protocol and INT1A interface will not be available.</td></tr><tr><td>Active PCR banks</td><td>N/A, reset required</td><td></td></tr><tr><td>Available PCR banks</td><td>N/A, reset required</td><td></td></tr><tr><td>SHA-1 PCR Bank</td><td>Disabled Enabled</td><td>Enables/Disables SHA-1 PCR Bank</td></tr><tr><td>SHA256 PCR Bank</td><td>Disabled Enabled</td><td>Enables/Disables SHA256 PCR Bank</td></tr><tr><td>SHA384 PCR Bank</td><td>Disabled Enabled</td><td>Enables/Disables SHA384 PCR Bank</td></tr><tr><td>SHA512 PCR Bank</td><td>Disabled Enabled</td><td>Enables/Disables SHA512 PCR Bank</td></tr><tr><td>SM3_256 PCR Bank</td><td>Disabled Enabled</td><td>Enables/Disables SM3_256 PCR Bank</td></tr><tr><td>Pending operation</td><td>None TPM Clear</td><td>Schedule an Operation for the Security Device. NOTE: Your Computer will reboot during restart in order to change State of Security Device.</td></tr><tr><td>Platform Hierarchy</td><td>Disabled Enabled</td><td>Enables/Disables Platform Hierarchy</td></tr><tr><td>Storage Hierarchy</td><td>Disabled Enabled</td><td>Enables/Disables Storage Hierarchy</td></tr><tr><td>Endorsement Hierarchy</td><td>Disabled Enabled</td><td>Enables/Disables Endorsement Hierarchy</td></tr><tr><td>TPM2.0 UEFI Spec Version</td><td>TCG_1_2 TCG_2</td><td>Select the TCG2 Spec Version Support</td></tr><tr><td>Physical Presence Spec Version</td><td>1.2 1.3</td><td>Select to Tell OS to support PPI Spec Version 1.2 or 1.3. Note some HCK tests might not support 1.3.</td></tr><tr><td>TPM 2.0InterfaceType</td><td>CRBTIS</td><td>Select the Communication Interface for the TPM 2.0 Device.</td></tr><tr><td>Device Select</td><td>TPM 1.2TPM 2.0Auto</td><td>TPM 1.2 will restrict support to TPM 1.2 devices, TPM 2.0 will restrict support to TPM 2.0 devices, Auto will support both with the default set to TPM 2.0 devices if not found, TPM 1.2 devices will be enumerated.</td></tr></table>

A.4.21 Advanced > USB Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td colspan="3">USB Configuration</td></tr><tr><td>XHCI Hand-off</td><td>Disabled Enabled</td><td>This is a workaround for OSes without XHCI hand-off support. The XHCI ownership change should be claimed by the XHCI driver.</td></tr><tr><td>USB Mass Storage Driver Support</td><td>Disabled Enabled</td><td>Enables/Disables USB Mass Storage Driver Support.</td></tr><tr><td colspan="3">USB hardware delays and time-outs:</td></tr><tr><td>USB transfer time-out</td><td>1 sec5 sec10 sec20 sec</td><td>The time-out value for Control, Bulk, and Interrupt transfers.</td></tr><tr><td>Device reset time-out</td><td>10 sec20 sec30 sec40 sec</td><td>USB mass storage device Start Unit command time-out.</td></tr><tr><td>Device power-up delay</td><td>Auto Manual</td><td>Maximum time the device will take before it properly reports itself to the Host Controller. 'Auto' uses the default value: 100 ms for a Root port, for a Hub port the delay is taken from the Hub descriptor.</td></tr><tr><td>Device power-up delay in seconds</td><td>[Max-Value, Min-Value, Step-Value] = [0x28, 0x01, 0x01]</td><td>Delay range is 1 to 40 seconds, in one second increments.</td></tr></table>

# A.5 Chipset

A.5.1 Chipset > North Bridge

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td colspan="3">Memory Information</td></tr><tr><td>Total Memory</td><td>Info only</td><td></td></tr><tr><td>Memory Voltage</td><td>Info only</td><td></td></tr><tr><td>Memory Slot0</td><td>Info only</td><td></td></tr><tr><td>Max TOLUD</td><td>2 GB, 2.25GB, 2.5GB, 2.75GB, 3 GB</td><td>Maximum Value of TOLUD.</td></tr><tr><td>Above 4GB MMIO BIOS assignment</td><td>DisabledEnabled</td><td>Enables/Disables above 4GBMemoryMappedIO BIOS assignment</td></tr><tr><td>PCIE VGA Workaround</td><td>DisabledEnabled</td><td>Enable it if your PCIe card cannot boot to DOS. This is for testing only.</td></tr></table>

A.5.2 Chipset > South Bridge

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Serial IRQ Mode</td><td>QuietContinuous</td><td>Configure Serial IRQ Mode.</td></tr><tr><td>SMBus Support</td><td>DisabledEnabled</td><td>Enables/Disables SMBus Support</td></tr><tr><td>PCI CLOCK RUN</td><td>DisabledEnabled</td><td>Enables/Disables CLKRUN# logic to stop PCI clocks.</td></tr></table>

A.5.3 Chipset > Uncore Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Integrated Graphics Device</td><td>DisabledEnabled</td><td>Enabled: Enable Integrated Graphics Device (IGD) when selected as the Primary Video Adaptor. Disabled: Always disable IGD</td></tr><tr><td>Primary Display</td><td>IGDPCIeHG</td><td>Select which IGD/PCI Graphics device should be the Primary Display.</td></tr><tr><td>RC6 (Render Standby)</td><td>DisabledEnabled</td><td>Check to enable render standby support. RC6 should be enabled if S0ix is enabled.</td></tr><tr><td>GTT Size</td><td>2MB4MB8MB</td><td>Select the GTT Size.</td></tr><tr><td>Aperture Size</td><td>128MB256MB512MB</td><td>Select the Aperture Size.</td></tr><tr><td>DVMT Pre-Allocated</td><td>64M, 96M, 128M, 160M, 192M, 224M, 256M, 288M, 320M, 352M, 384M, 416M, 448M, 480M, 512M</td><td>Select the DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphics Device.</td></tr><tr><td>DVMT Total Gfx Mem</td><td>128M, 256M, MAX</td><td>Select the DVMT5.0 Total Graphic Memory size used by the Internal Graphics Device.</td></tr><tr><td>Cd Clock Frequency</td><td>144 MHz, 288 MHz, 384 MHz, 576 MHz, 624 MHz</td><td>Select the highest Cd Clock frequency supported by the platform.</td></tr></table>

# A.5.4 Chipset > South Cluster Configuration > HD-Audio Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td colspan="3">HD-Audio Configuration</td></tr><tr><td>HD-Audio Support</td><td>Disabled Enabled</td><td>Enables/Disables HD-Audio Support</td></tr></table>

A.5.5 Chipset > South Cluster Configuration > LPSS Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td colspan="3">Low Power Sub System</td></tr><tr><td>LPSS I2C #1 Support (D22:F0)</td><td>DisablePCI ModeACPI Mode</td><td>Enables/Disables LPSS I2C #1 Support</td></tr><tr><td>Set LPSS I2C #1 Speed</td><td>Standard ModeFast ModeFast Plus ModeHigh Speed Mode</td><td>Select LPSS I2C #1 Speed</td></tr><tr><td>LPSS I2C #3 Support (D22:F2)</td><td>DisablePCI ModeACPI Mode</td><td>Enables/Disables LPSS I2C #3 Support</td></tr><tr><td>Set LPSS I2C #3 Speed</td><td>Standard ModeFast ModeFast Plus ModeHigh Speed Mode</td><td>Select LPSS I2C #3 Speed</td></tr><tr><td>LPSS I2C #4 Support (D22:F3)</td><td>DisablePCI ModeACPI Mode</td><td>Enables/Disables LPSS I2C #4 Support</td></tr><tr><td>Set LPSS I2C #4 Speed</td><td>Standard ModeFast ModeFast Plus ModeHigh Speed Mode</td><td>Select LPSS I2C #4 Speed</td></tr><tr><td>LPSS I2C #5 Support (D23:F0)</td><td>DisablePCI ModeACPI Mode</td><td>Enables/Disables LPSS I2C #5 Support</td></tr><tr><td>Set LPSS I2C #5 Speed</td><td>Standard ModeFast ModeFast Plus ModeHigh Speed Mode</td><td>Select LPSS I2C #5 Speed</td></tr><tr><td>LPSS I2C #6 Support (D23:F1)</td><td>DisablePCI ModeACPI Mode</td><td>Enables/Disables LPSS I2C #6 Support</td></tr><tr><td>Set LPSS I2C #6 Speed</td><td>Standard ModeFast ModeFast Plus ModeHigh Speed Mode</td><td>Select LPSS I2C #6 Speed</td></tr></table>

A.5.6 Chipset > South Cluster Configuration > PCI Express Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>PCI Express Clock Gating</td><td>Disabled Enabled</td><td>Enables/Disables PCI Express Clock Gating for each root port.</td></tr><tr><td colspan="3">PCIE Port assigned to LAN</td></tr><tr><td>Port8xh Decode Port#</td><td>[Max-Value, Min-Value, Step-Value] = [0x14, 0x00, 0x01]</td><td>Selects PCI Express Port8xh Decode Root Port. User to ensure port availability.</td></tr><tr><td>Peer Memory Write Enable</td><td>Disabled Enabled</td><td>Enables/Disables Peer Memory Write</td></tr><tr><td>Compliance Test Mode</td><td>Disabled Enabled</td><td>Enable when using Compliance Load Board</td></tr><tr><td>&gt; PCI Express Root Port 1</td><td></td><td></td></tr><tr><td>&gt; PCI Express Root Port 5</td><td></td><td></td></tr><tr><td>&gt; PCI Express Root Port 6</td><td></td><td></td></tr></table>

A.5.7 Chipset > South Cluster Configuration > SATA Drives

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Chipset SATA</td><td>DisabledEnabled</td><td>Enables/Disables the Chipset SATA Controller. The Chipset SATA controller supports the 2 black internal SATA ports (up to 3Gb/s supported per port).</td></tr><tr><td>SATA Interface Speed</td><td>AutoGen1Gen2Gen3</td><td>Select SATA Interface Speed.CHV A1 always with Gen1 Speed.</td></tr><tr><td>SATA Test Mode</td><td>DisabledEnabled</td><td>Enables/Disables Test Mode (Loop Back).</td></tr><tr><td>Aggressive LPM Support</td><td>DisabledEnabled</td><td>Enables/Disables PCH to aggressively enter link power state.</td></tr><tr><td colspan="3">SATA Port 0 (M.2)</td></tr><tr><td colspan="3">Software Preserve</td></tr><tr><td>Port 0</td><td>DisabledEnabled</td><td>Enables/Disables SATA Port</td></tr><tr><td>SATA Port 0 Hot Plug Capability</td><td>DisabledEnabled</td><td>Designates this port as Hot Pluggable</td></tr><tr><td colspan="3">Configured as eSATA</td></tr><tr><td>Mechanical Presence Switch</td><td>DisabledEnabled</td><td>Controls reporting if this port has a Mechanical Presence Switch.</td></tr><tr><td>Spin Up Device</td><td>DisabledEnabled</td><td>If enabled for any ports, Staggerred Spin Up will be performed and only the drives which have this option enabled will spin up at boot. Otherwise all drives spin up at boot.</td></tr><tr><td>SATA Device Type</td><td>Hard Disk DriveSolid State Drive</td><td>Identifies if the SATA port is connected to a Solid State Drive or Hard Disk Drive.</td></tr><tr><td>SATA Port 0 DevSlp</td><td>DisabledEnabled</td><td>Enables/Disables SATA Port 0 DevSlp. Board rework for LP needed before enabling.</td></tr><tr><td>DITO Configuration</td><td>DisabledEnabled</td><td>Enables/Disables DITO Configuration</td></tr><tr><td>DITO Value</td><td>[Max-Value, Min-Value, Step-Value] = [0x03FF, 0x0000, 0x0000]</td><td>DITO Value</td></tr><tr><td>DM Value</td><td>[Max-Value, Min-Value, Step-Value] = [0x0F, 0x00, 0x00]</td><td>DM Value</td></tr><tr><td colspan="3">SATA Port 1 (2.5” SSD)</td></tr><tr><td colspan="3">Software Preserve</td></tr><tr><td>Port 1</td><td>DisabledEnabled</td><td>Enables/Disables SATA Port</td></tr><tr><td>SATA Port 1 Hot Plug Capability</td><td>Disabled Enabled</td><td>Designates this port as Hot Pluggable</td></tr><tr><td colspan="3">Configured as eSATA</td></tr><tr><td>Mechanical Presence Switch</td><td>Disabled Enabled</td><td>Controls reporting if this port has a Mechanical Presence Switch.</td></tr><tr><td>Spin Up Device</td><td>Disabled Enabled</td><td>If enabled for any ports, Staggered Spin Up will be performed and only the drives which have this option enabled will spin up at boot. Otherwise all drives spin up at boot.</td></tr><tr><td>SATA Device Type</td><td>Hard Disk Drive Solid State Drive</td><td>Identifies if the SATA port is connected to a Solid State Drive or Hard Disk Drive.</td></tr><tr><td>SATA Port 1 DevSlp</td><td>Disabled Enabled</td><td>Enables/Disables SATA Port 1 DevSlp. Board rework for LP needed before enabling.</td></tr><tr><td>DITO Configuration</td><td>Disabled Enabled</td><td>Enables/Disables DITO Configuration</td></tr><tr><td>DITO Value</td><td>[Max-Value, Min-Value, Step-Value] = [0x03FF, 0x0000, 0x0000]</td><td>DITO Value</td></tr><tr><td>DM Value</td><td>[Max-Value, Min-Value, Step-Value] = [0x0F, 0x00, 0x00]</td><td>DM Value</td></tr></table>

# A.5.8 Chipset > South Cluster Configuration > SCC Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>SCC eMMC Support (D28:F0)</td><td>DisabledEnabled</td><td>Enables/Disables SCC eMMC Support</td></tr><tr><td>eMMC Max Speed</td><td>HS400HS200DDR50</td><td>Select the eMMC maximum speed allowed.</td></tr></table>

A.5.9 Chipset > PCH-IO Configuration > USB Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>XHCI Pre-Boot Driver</td><td>EnabledDisabled</td><td>Enables/Disables XHCI Pre-Boot Driver support.</td></tr><tr><td>xHCI Mode</td><td>DisabledEnabled</td><td>Once disabled, the XHCI controller is disabled and none of the USB devices are detectable or usable during boot time, or by the OS. Do not disable it unless using it for debug purposes.</td></tr><tr><td>USB VBUS</td><td>OFFON</td><td>VBUS should be ON in HOST mode. It should be OFF in OTG device mode.</td></tr><tr><td>USB HSIC1 Support</td><td>DisabledEnabled</td><td>Enables/Disables USB HSIC1</td></tr><tr><td>USB SSIC1 Support</td><td>DisabledEnabled</td><td>Enables/Disables USB SSIC1</td></tr><tr><td>USB Port Disable Override</td><td>DisabledEnabled</td><td>Selectively Enables/Disables the corresponding USB port from reporting a Device Connection to the controller.</td></tr><tr><td>USB Port #0</td><td>DisabledEnabled</td><td>Enables/Disables USB port. Once disabled, any USB devices plugged into the connector will not be detected by the BIOS or OS.</td></tr><tr><td>USB Port #1</td><td>DisabledEnabled</td><td>Enables/Disables USB port. Once disabled, any USB devices plugged into the connector will not be detected by the BIOS or OS.</td></tr><tr><td>USB Port #2</td><td>DisabledEnabled</td><td>Enables/Disables USB port. Once disabled, any USB devices plugged into the connector will not be detected by the BIOS or OS.</td></tr><tr><td>USB Port #3</td><td>DisabledEnabled</td><td>Enables/Disables USB port. Once disabled, any USB devices plugged into the connector will not be detected by the BIOS or OS.</td></tr><tr><td>USB Port #4</td><td>Disabled Enabled</td><td>Enables/Disables USB port. Once disabled, any USB devices plugged into the connector will not be detected by the BIOS or OS.</td></tr><tr><td>USB Port #5</td><td>Disabled Enabled</td><td>Enables/Disables USB port. Once disabled, any USB devices plugged into the connector will not be detected by the BIOS or OS.</td></tr><tr><td>USB Port #6</td><td>Disabled Enabled</td><td>Enables/Disables USB port. Once disabled, any USB devices plugged into the connector will not be detected by the BIOS or OS.</td></tr><tr><td>USB Port #7</td><td>Disabled Enabled</td><td>Enables/Disables USB port. Once disabled, any USB devices plugged into the connector will not be detected by the BIOS or OS.</td></tr><tr><td>USB 3 Port #0</td><td>Disabled Enabled</td><td>Enables/Disables USB port. Once disabled, any USB devices plugged into the connector will not be detected by the BIOS or OS.</td></tr><tr><td>USB 3 Port #1</td><td>Disabled Enabled</td><td>Enables/Disables USB port. Once disabled, any USB devices plugged into the connector will not be detected by the BIOS or OS.</td></tr><tr><td>USB 3 Port #2</td><td>Disabled Enabled</td><td>Enables/Disables USB port. Once disabled, any USB devices plugged into the connector will not be detected by the BIOS or OS.</td></tr><tr><td>USB 3 Port #3</td><td>Disabled Enabled</td><td>Enables/Disables USB port. Once disabled, any USB devices plugged into the connector will not be detected by the BIOS or OS.</td></tr><tr><td>USB 3 Port #4</td><td>Disabled Enabled</td><td>Enables/Disables USB port. Once disabled, any USB devices plugged into the connector will not be detected by the BIOS or OS.</td></tr><tr><td>USB 3 Port #5</td><td>DisabledEnabled</td><td>Enables/Disables USB port. Once disabled, any USB devices plugged into the connector will not be detected by the BIOS or OS.</td></tr><tr><td>XDCI Support</td><td>DisabledPCI Mode</td><td>Enables/Disables XDCI</td></tr><tr><td>XHCI Disable Compliance Mode</td><td>FALSETRUE</td><td>Options to disable XHCI Link Compliance Mode. Default is FALSE to not disable Compliance Mode. Set TRUE to disable Compliance Mode.</td></tr><tr><td>USB HW MODE AFE Comparators</td><td>DisabledEnabled</td><td>Enables/Disables USB HW MODE AFE Comparators</td></tr></table>

# A.5.10 Chipset > PCH-IO Configuration > Miscellaneous Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>State After G3</td><td>S0 State S5 State</td><td>Specifies what state to go to when power is re-applied after a power failure (G3 state).</td></tr><tr><td>BIOS Lock</td><td>Disabled Enabled</td><td>Enables/Disables the PCH BIOS Lock Enable feature. Required to be enabled to ensure SMM protection of flash.</td></tr></table>

# A.6 Security

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td colspan="3">If ONLY the Administrator&#x27;s password is set, then this only limits access to Setup and is only asked for when entering Setup. If ONLY the User&#x27;s password is set, then this is a power on password and must be entered to boot or enter Setup. In Setup the User will have Administrator rights. The password length must be in the following range:</td></tr><tr><td>Minimum length</td><td>20</td><td></td></tr><tr><td>Maximum length</td><td>20</td><td></td></tr></table>

# A.7 Boot

A.7.1 Boot > Boot Configuration

<table><tr><td>Feature</td><td>Options</td><td>Description</td><td></td></tr><tr><td>Setup Prompt Timeout</td><td>[Max-Value, Min-Value, Step-Value] = [0xFFFF, 0x0001, 0x0001]</td><td colspan="2">Number of seconds to wait for setup activation key. 65535 (0xFFFF) means indefinite waiting.</td></tr><tr><td>Bootup NumLock State</td><td>On Off</td><td colspan="2">Selects the keyboard NumLock state.</td></tr><tr><td>Quiet Boot</td><td>Disabled Enabled</td><td colspan="2">Enables/Disables Quiet Boot option.</td></tr><tr><td>Fast Boot</td><td>Disabled Enabled</td><td colspan="2">Enables/Disables boot with initialization of a minimal set of devices required to launch active boot option. Has no effect for BBS boot options.</td></tr><tr><td>Boot Option #1</td><td rowspan="8">Hard Disk CD/DVD USB Hard Disk USB CD/DVD USB Key USB Floppy USB Lan Network Disabled</td><td>Hard Disk</td><td rowspan="8">Sets the system boot order</td></tr><tr><td>Boot Option #2</td><td>CD/DVD</td></tr><tr><td>Boot Option #3</td><td>USB Hard Disk</td></tr><tr><td>Boot Option #4</td><td>USB CD/DVD</td></tr><tr><td>Boot Option #5</td><td>USB Key</td></tr><tr><td>Boot Option #6</td><td>USB Floppy</td></tr><tr><td>Boot Option #7</td><td>USB Lan</td></tr><tr><td>Boot Option #8</td><td>Network</td></tr></table>

# A.8 Save & Exit

<table><tr><td>Feature</td><td>Options</td><td>Description</td></tr><tr><td>Save Changes and Exit</td><td>YesNo</td><td>Exits system setup after saving the changes.</td></tr><tr><td>Discard Changes and Exit</td><td>YesNo</td><td>Exits system setup without saving any changes.</td></tr><tr><td>Save Changes and Reset</td><td>YesNo</td><td>Resets the system after saving the changes.</td></tr><tr><td>Discard Changes and Reset</td><td>YesNo</td><td>Resets system setup without saving any changes.</td></tr><tr><td>Save Options</td><td colspan="2">Info only</td></tr><tr><td>Save Changes</td><td>YesNo</td><td>Saves changes done so far to any of the setup options.</td></tr><tr><td>Discard Changes</td><td>YesNo</td><td>Discards changes done so far to any of the setup options.</td></tr><tr><td>Restore Defaults</td><td>YesNo</td><td>Restores/Loads default values for all the setup options.</td></tr><tr><td>Save as User Defaults</td><td>YesNo</td><td>Saves the changes done so far as User Defaults.</td></tr><tr><td>Restore User Defaults</td><td>YesNo</td><td>Restores the User Defaults to all the setup options.</td></tr><tr><td>Boot Override</td><td colspan="2">Info only</td></tr><tr><td>Launch EFI Shell from filesystem device</td><td colspan="2"></td></tr></table>

This page intentionally left blank.

# Important Safety Instructions

For user safety, please read and follow all instructions, Warnings, Cautions, and Notes marked in this manual and on the associated device before handling/operating the device, to avoid injury or damage.

 Read these safety instructions carefully.
 Keep the User’s Manual for future reference.
 Read the Specifications section of this manual for detailed information on the recommended operating environment.
It is recommended that the device be installed in Information Technology Rooms that are in accordance with Article 645 of the National Electrical Code and NFPA 75.
 When installing/mounting or uninstalling/removing device is required:
 Turn off power and unplug any power cords/cables.
 Reinstall all chassis covers before restoring power.
 To avoid electrical shock and/or damage to device:
 Keep device away from water or liquid sources.
 Keep device away from high heat or humidity.
 Keep device properly ventilated (do not block or cover ventilation openings).
 Always use recommended voltage and power source settings.
 Always install and operate device near an easily accessible electrical outlet.
 Secure the power cord (do not place any object on/over the power cord).
 Only install/attach and operate device on stable surfaces and/or recommended mountings.
 The device is powered by an adapter or DC source. Ensure that the adapter or DC source is properly grounded.
 If the device will not be used for long periods of time, turn off and unplug from its power source.
 Never attempt to repair the device, which should only be serviced by qualified technical personnel using suitable tools.

 A Lithium-type battery may be provided for uninterrupted backup or emergency power.

![A yellow triangular warning sign with a black border features a black exclamation point in its center. Below the triangle, the word 'CAUTION.' is printed in black capital letters on a white background.](.sp2-al-50m-00117-1000-10/480d7e7146ffa0c234dcbbfae8015efdf79f1c8de5c0b08126a684db071d8543.jpg)

Risk of explosion if battery is replaced with one of an incorrect type; please dispose of used batteries appropriately.

 The device must be serviced by authorized technicians when:

 The power cord or plug is damaged
 Liquid has entered the device interior
 The device has been exposed to high humidity and/or moisture
 The device is not functioning or does not function according to the User’s Manual
 The device has been dropped and/or damaged and/or shows obvious signs of breakage

Disconnect the power supply cord before loosening the thumbscrews and always fasten the thumbscrews with a screwdriver before starting the system up.

 It is recommended that the device be installed only in a server room or computer room where access is:

 Restricted to qualified service personnel or users familiar with restrictions applied to the location, reasons therefor, and any precautions required
 Only afforded by the use of a tool or lock and key, or other means of security, and controlled by the authority responsible for the location.

![Yellow triangular warning sign with black smoke symbol indicating hot weather](.sp2-al-50m-00117-1000-10/256c46df8ab2684b29593cd876a0f29e75a22bf037fd8dd4d73cb18ed138d8bd.jpg)

# BURN HAZARD

Touching this surface could result in bodily injury. To reduce risk, allow the surface to cool before touching.

# Consignes de Sécurité Importante

Pour la sécurité de l'utilisateur, veuillez lire et suivre toutes les instructions, avertissements, mises en garde et notes marqués dans ce manuel et sur l'appareil associé avant de manipuler/ d'utiliser l'appareil, afin d'éviter toute blessure ou tout dommage.

 Lisez attentivement ces consignes de sécurité
 Conservez le manuel de l'utilisateur pour pouvoir le consulter ultérieurement
Lisez la section Spécifications de ce manuel pour des informations détaillées sur l'environnement d'exploitation recommandé
 Il est recommandé d'installer l'appareil dans Information Salles technologiques conformes à l'article 645 du Code national de l'électricité et NFPA 75.

 Lorsque l'installation/le montage ou la désinstallation/le retrait du périphérique est requis:

 Mettez l'appareil hors tension et débranchez tous les cordons/câbles d'alimentation
 Réinstallez tous les couvercles de châssis avant de rétablir l'alimentation

 Pour éviter les chocs électriques et/ou d’endommager l’appareil:

 Tenez l'appareil à l'écart de toute source d'eau ou de liquide.

 Tenez l'appareil à l'écart d'une forte chaleur ou d'une humidité élevée.

 Maintenez l'appareil correctement ventilé (n'obstruer ou ne couvrez pas les ouvertures de ventilation).

 Utilisez toujours les réglages de tension et de source d'alimentation recommandés.

 Installez et utilisez toujours l'appareil près d'une prise de courant facilement accessible.

 Fixez le cordon d'alimentation (ne placez aucun objet sur le cordon d'alimentation).

 Installez/fixez et utilisez l'appareil uniquement sur des surfaces stables et/ou sur les fixations recommandées.
 L'ordinateur Smart Touch est alimenté par un adaptateur ou une source CC. Veuillez vous assurer que l'adaptateur ou la source CC doit conserver la connexion à la terre s'il est doté d'une protection.

Si l'appareil ne doit pas être utilisé pendant de longues périodes, éteignez-le et débranchez-le de sa source d'alimentation
 N'essayez jamais de réparer l'appareil, qui ne doit être réparé que par un personnel technique qualifié à l'aide d'outils appropriés
 Une batterie de type Lithium peut être fournie pour une alimentation de secours ininterrompue ou d'urgence.

![The image features a yellow triangular warning sign containing a large black exclamation point in its center. Directly below the triangle, the word 'CAUTION:' is printed in black capital letters.](.sp2-al-50m-00117-1000-10/e2b7d68c4ab7c41cdfd8aefdf95e3b2e148c0da05725fb9467e7cb634cb375fe.jpg)

ATTENTION: Risque d’explosion si la pile est remplacée par une autre de type incorrect. Veuillez jeter les piles usagées de façon appropriée.

 L'appareil doit être entretenu par des techniciens agrees lorsque:

 Le cordon d’alimentation ou la prise est endommagé(e)
 Un liquide a pénétré à l'intérieur de l'appareil.
 L'appareil a été exposé à une forte humidité et/ou de la buée.
 L'appareil ne fonctionne pas ou ne fonctionne pas selon le manuel de l'utilisateur.
 L'appareil est tombé et/ou a été endommagé et/ou présente des signes évidents de dommage.

Débranchez le cordon d'alimentation avant de desserrer les vis à oreilles et serrez toujours les vis à oreilles avec un tournevis avant de mettre le système en marche.

 Il est recommandé d'installer l'appareil uniquement dans une salle de serveurs ou une salle informatique où l'accès est:

 Réservé au personnel de service qualifié ou aux utilisateurs familiarisés avec les restrictions appliquées à l'emplacement, aux raisons de ces restrictions et toutes les précautions requises
 Uniquement autorisé par l'utilisation d'un outil, d'une serrure et d'une clé, ou d'un autre moyen de sécurité, et contrôlé par l'autorité responsable de l'emplacement.

![Yellow triangular warning sign with black smoke symbol indicating hot weather](.sp2-al-50m-00117-1000-10/0e3d39679ff93873ce1ada41418c44bf54d487d403f7428f74d5123d6b6ec5a5.jpg)

# RISQUE DE BRÛLURES

Partie chaude! Ne touchez pas cette surface, cela pourrait entraîner des blessures. Pour éviter tout danger, laissez la surface refroidir avant de la toucher.

# EMC Compliance

# CE Warning

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

# FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.

# Getting Service

Ask an Expert: https://www.adlinktech.com/en/Askanexpert

# ADLINK Technology, Inc.

No. 66, Huaya 1st Rd., Guishan District, Taoyuan City 333411, Taiwan

Tel: +886-3-216-5088

Fax: +886-3-328-5706

Email: service@adlinktech.com

# Ampro ADLINK Technology, Inc.

6450 Via Del Oro

San Jose, CA 95119-1208, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

Fax: +1-408-600-1189

Email: info@adlinktech.com

# ADLINK Technology (China) Co., Ltd.

300 Fang Chun Rd., Zhangjiang Hi-Tech Park

Pudong New Area, Shanghai, 201203 China

Tel: +86-21-5132-8988

Fax: +86-21-5132-3588

Email: market@adlinktech.com

# ADLINK Technology GmbH

Hans-Thoma-Straße 11

D-68163 Mannheim, Germany

Tel: +49-621-43214-0

Fax: +49-621 43214-30

Email: emea@adlinktech.com

Please visit the Contact page at www.adlinktech.com for information on how to contact the ADLINK regional office nearest you.
[🔗 Link to the original document](.sp2-al-50m-00117-1000-10/sp2-al-50m-00117-1000-10.pdf)