# Titan-AL Series

# Titan-15WP/21WP/24W-E3950

# Rugged Panel Computer

# User's Manual

![Exterior view of a modern office building (no signage)](.titan-al-50-1z299-1010-11/2b4898b19f453f0e7eae207dbca4ee38924a78fb44f2e2947e7780104b143faf.jpg)

Manual Rev.: 1.1

Revision Date: December 6, 2019

Part No: 50-1Z299-1010

# Revision History

<table><tr><td>Revision</td><td>Release Date</td><td>Description of Change(s)</td></tr><tr><td>1.0</td><td>2019-06-18</td><td>Initial Release</td></tr><tr><td>1.1</td><td>2019-12-06</td><td>Update product name, specifications, mechanical drawings; add pipe version installation instructions; correct driver installation and BIOS settings</td></tr></table>

# Preface

# Copyright © 2019 ADLINK Technology Inc.

This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.

# Disclaimer

The information in this document is subject to change without prior notice in order to improve reliability, design, and function and does not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

# Environmental Responsibility

ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to ensure that our products, manufacturing processes, components, and raw materials have as little impact on the environment as possible. When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company.

![Simple line drawing of a trash bin with two crossed lines (no text or symbols)](.titan-al-50-1z299-1010-11/d367e5b376b81c5eaf90d746ece6f4ce6b23dc42a0617c08fda7b87121a05e42.jpg)

![A horizontal black rectangle with a thin white border is positioned near the top of a white background. There is no text in the image.](.titan-al-50-1z299-1010-11/d0adab0604d1d8176544ede435f3d90c6ec6a6bd6aea41f76791847d616df07d.jpg)

Battery Labels (for products with battery)
![Symbol of a trash bin crossed out by two diagonal lines (no text or numbers present)](.titan-al-50-1z299-1010-11/fde32b63104d5919f5447564b12e160e6fc4ff5bc26c476411f275fe19c03187.jpg)

![Recycling symbol icon with three chasing arrows inside a square frame (no text or labels)](.titan-al-50-1z299-1010-11/c9746badecdbf843a844ff570d778b71046c336bd605b01a269710d09bdace37.jpg)

Li-ion

![RECYCLE\nRBRC\nLi-ion\n1.800.822.8837](.titan-al-50-1z299-1010-11/69944ca64dfc0ddc9358bf90ab293af349b1640b564609f1568b1ee5383a9198.jpg)

![Abstract geometric pattern with interlocking X and Y shapes (no text or symbols)](.titan-al-50-1z299-1010-11/9fd5e3040c17b32c66dd5e9b0d938892391f012afc709eb221b04fb1bcdee24d.jpg)

廢電池請回收

# California Proposition 65 Warning

![The image displays a yellow triangular warning sign with a thick black border. Centered within the triangle is a large black exclamation point.](.titan-al-50-1z299-1010-11/f35d481d2b43449129989f951f80dbf02b7b1f23c0963e5e9019b505d88411a9.jpg)

WARNING: This product can expose you to chemicals including acrylamide, arsenic, benzene, cadmium, Tris(1,3-dichloro-2-propyl) phosphate (TDCPP), 1,4- Dioxane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and vinyl materials, which are known to the State of California to cause cancer, and acrylamide, benzene, cadmium, lead, mercury, phthalates, toluene, DEHP, DIDP, DnHP, DBP, BBP, PVC, and vinyl materials, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

# Trademarks

Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.

# Conventions

Take note of the following conventions used throughout this manual to make sure that users perform certain tasks and instructions properly.

![The image displays a graphic of a white document with horizontal gray lines and a folded top-left corner. A large red checkmark is superimposed diagonally across the center of the document.](.titan-al-50-1z299-1010-11/c861bb57934f13daae11fbe32b25f8273f02ca96cfcf98b942e8da25348ed313.jpg)
NOTE:

Additional information, aids, and tips that help users perform tasks.

![The image displays a standard warning sign: a yellow triangle with a black border. Inside the triangle is a large, black exclamation point.](.titan-al-50-1z299-1010-11/36905e72355d219c1193e5eefcea6ae3000d1877185e31346c53a729a76b514a.jpg)
CAUTION:

Information to prevent minor physical injury, component damage, data loss, and/or program corruption when trying to complete a task.

Informations destinées à prévenir les blessures corporelles mineures, les dommages aux composants, la perte de données et/ou la corruption de programme lors de l'exécution d'une tâche.

![The image displays a standard red triangular warning sign with a white border. Inside the triangle is a large white exclamation mark centered vertically and horizontally. The top edge of the image shows a small portion of a white shape above the triangle.](.titan-al-50-1z299-1010-11/ea7ca422dfab8a1b22a7ec49b8e07070531f4ed44a5600042503e468a1eece72.jpg)
WARNING:

Information to prevent serious physical injury, component damage, data loss, and/or program corruption when trying to complete a specific task.

Informations destinées à prévenir les blessures corporelles graves, les dommages aux composants, la perte de données et/ou la corruption de programme lors de l'exécution d'une tâche spécifique.

# Table of Contents

# Preface...... iii

# List of Tables ix

# List of Figures ...... xi

# 1 Introduction ...... 1

1.1 Features.... 1
1.2 Packing List 2

# 2 Specifications.... 1

2.1 General Specifications.... 1
2.2 Mechanical Drawings.... 3

2.2.1 Titan-15WP-VESA/15WP-PIPE-E3950 3
2.2.2 Titan-21WP-VESA/PIPE-E3950 6
2.2.3 Titan-24WP-VESA/PIPE-E3950 9

2.3 I/O Connectors - VESA Mount Version.... 12
2.4 I/O Connectors - Pipe Mount Version 13
2.5 Smart Embedded Management Agent (SEMA) 14

# 3 Getting Started 15

3.1 Mounting Solutions 15

3.1.1 VESA Mounting 16
3.1.2 Pipe Mounting.... 17

3.2 Powering Up 23

3.2.1 Connect the AC Power Supply 23
3.2.2 Power Button 23

3.3 Driver Installation 24
3.4 SEMA Utility 26

# 4 Interfaces 27

# 4.1 Pin Definitions - VESA Mount Version 27

4.1.1 AC Power Input (M12) 27
4.1.2 COM Port (M12) 28
4.1.3 USB 2.0 Ports (M12)....29
4.1.4 GbE Ports (M12) 30

# 4.2 Pin Definitions - Pipe Mount Version 31

4.2.1 COM Ports (DB-9) 31
4.2.2 USB Ports 32
4.2.3 GbE Ports (RJ-45) 33
4.2.4 DisplayPort 34

# 5 BIOS Setup 35

# 5.1 Main 36

5.1.1 Board Information 38

# 5.2 Advanced 39

5.2.1 CPU Configuration....40
5.2.2 Graphics Configuration 41
5.2.3 Power Management....43
5.2.4 System Management....46
5.2.5 Thermal Management....47
5.2.6 Watchdog Timer 48
5.2.7 Super IO Configuration 49
5.2.8 Serial Console Redirection 50
5.2.9 Network Stack Configuration 51
5.2.10 Trusted Computing 52
5.2.11 USB Configuration 53
5.2.12 Intel I211 Gigabit Network Connection .... 54

# 5.3 Chipset.... 56

5.3.1 North Bridge....57
5.3.2 South Bridge 58
5.3.3 Uncore Configuration....59
5.3.4 South Cluster Configuration....60

5.4 Security.... 64
5.5 Boot 66
5.6 Save & Exit 68

# Important Safety Instructions.... 71

# Consignes de Sécurité Importantes.... 73

# Getting Service.... 75

This page intentionally left blank.

# List of Tables

Table 4-1: AC Power Input Pin Definition (M12)....27
Table 4-2: COM Ports Pin Definition (M12) 28
Table 4-3: USB 2.0 Port Pin Definition (M12) 29
Table 4-4: GbE Port Pin Definition (M12) 30
Table 4-5: COM Port Pin Definition (DB-9)....31
Table 4-6: USB 2.0 Pin Definition (Type A) 32
Table 4-7: USB 3.0 Pin Definition (Type A) 32
Table 4-8: RJ-45 GbE Pin Definition (RJ-45)....33
Table 4-9: GbE Port LED Definition....33
Table 4-10: DisplayPort Pin Definition 34

This page intentionally left blank.

# List of Figures

Figure 2-1: Titan-15WP Front View .... 3

Figure 2-2: Titan-15WP Side View (Right)....4

Figure 2-3: Titan-15WP-VESA Rear View 5

Figure 2-4: Titan-15WP-PIPE Rear View....5

Figure 2-5: Titan-21WP Front View 6

Figure 2-6: Titan-21WP Side View (Right)....7

Figure 2-7: Titan-21WP-VESA Rear View 8

Figure 2-8: Titan-21WP-PIPE Rear View....8

Figure 2-9: Titan-24WP Front View 9

Figure 2-10: Titan-24WP Side View (Right)....10

Figure 2-11: Titan-24WP-VESA Rear View 11

Figure 2-12: Titan-24WP-PIPE Rear View....11

Figure 2-13: VESA Mount External I/O 12

Figure 2-14: Pipe-Mount External I/O 13

Figure 3-1: VESA 75 Mounting 16

Figure 3-2: VESA 100 Mounting 16

Figure 3-3: AC Connector on Pipe Mount Version....23

This page intentionally left blank.

# 1 Introduction

The IP69K-rated Titan-AL Series of panel computers, based on the Intel Atom® x7-E3950 processor, is designed for use in monitoring and controlling production processes in industries obligated to meet high hygiene standards. The Titan series features power-efficient computing and up to 1080p high contrast display to present control schematics and graphical diagrams to systems operators. Encased in an IP69K, 316L stainless steel housing, the Titan series can withstand high pressure hot water cleaning, oxidative damage or other chemical reactions and is engineered to prevent water from remaining on the surface after cleaning with its flush front panel surface and the sleek rear chassis design. The pipe mounting option helps keep the workplace clean and neat by providing protection and allowing organization of cables. The Titan Panel Computer series is an ideal fit for food and beverage, pharmaceutical, automotive, and steel and metal industries.

# 1.1 Features

Intel Atom® x7-E3950 quad core processors
▶ Capacitive touch screen
▶ I/O:

▷ 2x USB 2.0 (M12, VESA mount version)
or
▷ 1x USB 3.0, 1x USB 2.0 (Type A, pipe mount version)
▷ 2x GbE ports
▷ 2x COM ports (RS-232/422/485)
▷ 1x DisplayPort (pipe mount model only)

▶ Built-in ADLINK SEMA management solution
▶ IP69K-rated fully sealed moisture- and particulate-proof housing (including I/O)
▶ Corrosion-resistant stainless steel SUS 316L (V4A) housing
▶ VESA Mount and Pipe Mount versions available

# 1.2 Packing List

Before unpacking, check the shipping carton for any damage. If the shipping carton and/or contents are damaged, inform your dealer immediately. Retain the shipping carton and packing materials for inspection. Obtain authorization from your dealer before returning any product to ADLINK. Ensure that the following items are included in the package.

# VESA Mount Version

▶ Titan-AL VESA mount unit
▶ Screw pack for VESA mounting
▶ Waterproof M12 cable kit
▷ 1x COM cable (DB-9)
▷ 1x GbE cable (RJ-45)
▷ 1x USB 2.0 Y-splitter to 2x Type A
▷ 2x M12 waterproof caps

▷ 1x AC power cable (US or EU version)

# Pipe Mount Version

▶ Titan-AL pipe mount unit
▶ Rear cover seal kit
▶ spacers and screw pack
▶ Base mount seal kit
▶ rubber seal, mounting bracket w/ adhesive, screw pack

# 2 Specifications

2.1 General Specifications

<table><tr><td></td><td>Titan-15W-E3950</td><td>Titan-21W-E3950</td><td>Titan-23W-E3950</td></tr><tr><td>Display Size</td><td>15.6"</td><td>21.5"</td><td>23.8"</td></tr><tr><td>Resolution</td><td>1366 x 768</td><td>1920 x 1080</td><td>1920 x 1080</td></tr><tr><td>Brightness (w/o touch)</td><td colspan="3">400 nits</td></tr><tr><td>Contrast Ratio</td><td>500:1</td><td>1100:1</td><td>1000:1</td></tr><tr><td>Viewing Angle (U/D/R/L)</td><td>80°/80°/85°/85°</td><td>89°/89°/89°/89°</td><td>89°/89°/89°/89°</td></tr><tr><td>Touch screen</td><td colspan="3">Projective capacitive sensor</td></tr><tr><td colspan="4">Main System</td></tr><tr><td>Processor</td><td colspan="3">Intel® AtomTM E3950</td></tr><tr><td>Memory</td><td colspan="3">4GB DDR3L default (up to 8GB)</td></tr><tr><td>Storage</td><td colspan="3">1x 2.5" SATA 128GB (default)</td></tr><tr><td>Operating System</td><td colspan="3">Windows 10 IoT Enterprise</td></tr><tr><td colspan="4">I/O</td></tr><tr><td>IP69K-rated I/O(M12 connectors,VESA Mount version)</td><td colspan="3">► 2x USB 2.0, M12► 2x GbE ,M12► 2x COM ports, RS-232/422/485► 1x AC power input</td></tr><tr><td>Integrated I/O ports(Pipe Mount version)</td><td colspan="3">► 1x USB 3.0, 1x USB 2.0, Type A► 2x GbE, RJ-45► 2x COM ports, RS-232/422/485► 1x DisplayPort (including audio support)► 1x AC power input</td></tr><tr><td>WiFi and Bluetooth(optional)</td><td colspan="3">► 802.11 a/b/g/n/ac► Bluetooth 4.0</td></tr><tr><td colspan="4">Mechanical</td></tr><tr><td>Construction</td><td colspan="3">Stainless steel SUS 316 (V4A)</td></tr><tr><td>Weight</td><td>8.0kg</td><td>12.0kg</td><td>12.8kg</td></tr><tr><td>Dimensions (HxWxD)</td><td>419 x 268 x 59 mm</td><td>561 x 353 x 67 mm</td><td>610 x 379 x 67 mm</td></tr><tr><td>Mounting Options</td><td colspan="3">► VESA mount, MIS-D 75/100mm► Pipe mount</td></tr><tr><td colspan="4">Power</td></tr><tr><td>Input Requirement</td><td colspan="3">110-240 VAC, 50-60Hz, 1.9A (internal 100W AC/DC PSU)</td></tr><tr><td>Power Consumption</td><td>35W</td><td>40W</td><td>48W</td></tr><tr><td colspan="4">Environmental</td></tr><tr><td>Temperature, Operating</td><td colspan="3">0°C to 45°C</td></tr><tr><td>Temperature, Storage</td><td colspan="3">-20°C to 60°C</td></tr><tr><td>Relative Humidity</td><td colspan="3">10% to 90% @ 40°C (non-condensing)</td></tr><tr><td>Vibration, Operating</td><td colspan="3">1G random 5 to 500Hz</td></tr><tr><td>Shock, Operating</td><td colspan="3">10G acceleration part to part, 11ms</td></tr><tr><td>IP Protection</td><td colspan="3">IP69K-rated</td></tr><tr><td>Certifications &amp; Compliance</td><td colspan="3">CE/FCC EN 55032/24, Part 15BEN61000-6-2/-4 (EN55011)UL/CB (62368) + CB (60950)</td></tr></table>

# VESA and Pipe Mount Model Names

Each size Titan-AL Series panel computer is available in VESA and Pipe Mount versions. The full model names are as below.

<table><tr><td>Mount Type</td><td>15.6&quot;</td><td>21.5&quot;</td><td>23.8&quot;</td></tr><tr><td>VESA Mount</td><td>Titan-15WP-VESA-E3950</td><td>Titan-21WP-VESA-E3950</td><td>Titan-24WP-VESA-E3950</td></tr><tr><td>Pipe Mount</td><td>Titan-15WP-PIPE-E3950</td><td>Titan-21WP-PIPE-E3950</td><td>Titan-24WP-PIPE-E3950</td></tr></table>

# 2.2 Mechanical Drawings

All dimensions shown are in millimeters (mm) unless otherwise stated.

# 2.2.1 Titan-15WP-VESA/15WP-PIPE-E3950

![419.0\n268.3](.titan-al-50-1z299-1010-11/ce20383affce83425e1df9b8d41999e9ca64d845a66b0c48903b90f00ea2025a.jpg)

Figure 2-1: Titan-15WP Front View

![Power Button\nPressure Balancing Valve\n14.5\n59.3\n15WP-VESA\n14.5\n59.3\n69.5\n15WP-PIPE](.titan-al-50-1z299-1010-11/7227ed1f50e7dc97689b286855ceea6f27669fcbecab2abd1aad871b5c973938.jpg)

Figure 2-2: Titan-15WP Side View (Right)

![159.5\n85.2](.titan-al-50-1z299-1010-11/bb56d183aa13e8d1987b42b87ba4dd2d9a5a810179f4f3d70c00fd2b7ccfb77d.jpg)

Figure 2-3: Titan-15WP-VESA Rear View

![132.0\n86.7](.titan-al-50-1z299-1010-11/2a1ec2f0c73995e381b37d988d7813ab91d0766aadb8e0a8437a87c36cdc650b.jpg)

Figure 2-4: Titan-15WP-PIPE Rear View

# 2.2.2 Titan-21WP-VESA/PIPE-E3950

![561.8\n353.3](.titan-al-50-1z299-1010-11/ca7db2723dac1a8c5b38a284092e187738c0044b37ce8b91cd124ae6d6c38864.jpg)

Figure 2-5: Titan-21WP Front View

![67.3\nPower Button\nPressure Balancing Valve\n22.3\n21WP-VESA\n22.3\n67.3\n77.6\n21WP-PIPE](.titan-al-50-1z299-1010-11/070d9e52723759a0977fbbf801560338434a0a86d0fa30f47f50691f3f25eeba.jpg)

Figure 2-6: Titan-21WP Side View (Right)

![230.9\n126.7](.titan-al-50-1z299-1010-11/6fbf242da4ad05e40683103783cfa05287e4e4a5a81b3c0811912f010df446c3.jpg)

Figure 2-7: Titan-21WP-VESA Rear View

![203.4\n128.1](.titan-al-50-1z299-1010-11/1d51ba14a81b071bdade3f77bb8cd5903b17708f82b97aec78a0b2a61ed2e445.jpg)

Figure 2-8: Titan-21WP-PIPE Rear View

# 2.2.3 Titan-24WP-VESA/PIPE-E3950

![610.0\n379.4](.titan-al-50-1z299-1010-11/9e0319dffc6e2b4aa2f2a8cc906efed7aa8531bce69f557524000189497d928a.jpg)

Figure 2-9: Titan-24WP Front View

![Power Button\nPressure Balancing Valve\n24WP-VESA\n24WP-PIPE\n22.3\n67.3\n22.3\n67.3\n77.6](.titan-al-50-1z299-1010-11/e1fbb2ce0a9093eaba4c524004813e7642b69ddf94ef2bfd21925dab1121ce10.jpg)

Figure 2-10: Titan-24WP Side View (Right)

![255.0\n99.7](.titan-al-50-1z299-1010-11/3dd7f36432a77c2af0c6031220a16deffd23e4080db34bad5778ea56adde28c9.jpg)

Figure 2-11: Titan-24WP-VESA Rear View

![227.5\n101.2](.titan-al-50-1z299-1010-11/6697c64f3d9f9e4e1ed9927eb7fc0840b7abe62df64726bfe4f2e52ac493a78d.jpg)

Figure 2-12: Titan-24WP-PIPE Rear View

# 2.3 I/O Connectors - VESA Mount Version

The M12 I/O connectors located on the underside of the Titan-AL VESA mount chassis are as follows.

![A\nB\nC\nD\nE\nF](.titan-al-50-1z299-1010-11/308dee81855507aec10edc09ebd4cff0d27a81c79c5fc5dba2f0b98fc68c2d6a.jpg)

Figure 2-13: VESA Mount External I/O

<table><tr><td>A</td><td>AC power input</td></tr><tr><td>B</td><td>COM1 port</td></tr><tr><td>C</td><td>COM2 port</td></tr><tr><td>D</td><td>GbE1 port</td></tr><tr><td>E</td><td>GbE2 port</td></tr><tr><td>F</td><td>USB 2.0 x2</td></tr></table>

# 2.4 I/O Connectors - Pipe Mount Version

I/O connectors located in the opening on the rear of the Pipe Mount Titan-AL chassis are as follows.

![A2\nA1\nB\nC2\nE\nD\nC1](.titan-al-50-1z299-1010-11/63fd163baffbb6cc64f548936b67f8b9f95b339c66e78d5f542feb1f1c989b27.jpg)

Figure 2-14: Pipe-Mount External I/O

<table><tr><td>A1</td><td>COM1 port</td></tr><tr><td>A2</td><td>COM2 port</td></tr><tr><td>B</td><td>USB 3.0</td></tr><tr><td>C1</td><td>GbE1</td></tr><tr><td>C2</td><td>GbE2</td></tr><tr><td>D</td><td>USB 2.0</td></tr><tr><td>E</td><td>DisplayPort</td></tr></table>

# 2.5 Smart Embedded Management Agent (SEMA)

The SEMA (Smart Embedded Management Agent) utility provides system control and failure protection, by counting, monitoring, and measuring hardware and software events.

For more information and operating instructions, please visit https://www.adlinktech.com/Products/Industrial IoT and Cloud solutions/SEMA Smart Embedded Management Agent/SEMA

# 3 Getting Started

Follow the instructions in this chapter to mount, power up, and install the drivers for the Titan-AL.

![The image displays an icon of a white document or page of paper with a folded top-right corner and horizontal lines running across it. A large, bold red checkmark is superimposed over the left side of the document.](.titan-al-50-1z299-1010-11/bb126845797433e014809406e73909fba6a3d69ac75854f9839bfbb62259719f.jpg)
NOTE:

To ensure correct operation of the device, do not cover the openings on the pressure balancing valve.

# 3.1 Mounting Solutions

The Titan-AL comes in VESA mount and pipe mount versions. The mounting procedures are described as described below.

# 3.1.1 VESA Mounting

Use the four M4 10mm screws included in the screw pack to mount the panel as shown (recommended torque: 12 to 15 kgf-cm).

![Metallic enclosure with four red-circled holes on its surface, mounted on a metal frame (no text or symbols visible)](.titan-al-50-1z299-1010-11/98bc7c54cf870621eb9f3aedf56a2821b48bd16d8c27df2c2bee570bb4749c2a.jpg)

Figure 3-1: VESA 75 Mounting

![Metallic enclosure with four red-circled holes on its surface, no text or symbols visible](.titan-al-50-1z299-1010-11/aa136504c0f6011be8e13ab0749117afd614f30f80419d6619f1c5adef0be196.jpg)

Figure 3-2: VESA 100 Mounting

# 3.1.2 Pipe Mounting

The Titan-AL pipe mount version requires an optional pipe mount bracket that is customized for the intended application. Please contact your local ADLINK representative for more information.

# Securing the bracket to the panel

1. Connect all required cables to the connectors on the rear of the Pipe Mount Titan-AL chassis (Section 2.4 on page 13).
2. Feed the cables into the pipe mount bracket and out the base.
3. Make sure that the rubber seal is attached to the rear of the chassis as shown, and that the 8 spacers are inserted into the holes.

![Spacers (8)\nScrews (8)](.titan-al-50-1z299-1010-11/658abc1db172e0054c7350274da5bfae2be6d25cb771db3cc5ba0a17e33b3360.jpg)

4. Attach the bracket onto the rubber seal and secure it with the 8 waterproof M4 screws provided.
5. Use a T20 screwdriver to tighten the screws in the criss-cross pattern indicated in the diagram below (note that the bottom center screw is a 7mm hex head due to the reduced clearance available). It is recommended to tighten the screws to the following torque values in 2 stages: first to 12 kgf-cm, then to 15 kgf-cm.

![Technical diagram of an electrical enclosure with numbered components and wiring connections](.titan-al-50-1z299-1010-11/7d5037af923a6908a0fc150f009757b7fe8f39457554649b032be348ed568910.jpg)

![The image displays a white icon resembling a document or sheet of paper with horizontal lines and a folded top-right corner. A large red checkmark is superimposed diagonally across the center of the paper.](.titan-al-50-1z299-1010-11/d000b5e8a4dbb51b040022e2ccc48e476ab566b1e867c998f22f15550c169251.jpg)
NOTE:

Screw type: Flathead M4-0.7X20 (T20) stainless steel screw with gasket-type seal and NYLOK® blue patch

Bottom center screw: 7mm hex head M4-0.7X20 stainless steel screw w/ O-ring and NYLOK® blue patch

# Preparing the mounting surface

Prepare the mounting surface for the pipe mount bracket by drilling and threading 10 mounting holes (M6 thread), drilling 3 positioning holes (∅ 5.5mm), and making a cut-out (∅ 70mm) for the cables as shown in the diagram below.

![120\n80\nØ 5.50 (Depth)7.0mm)\nØ 70 (Through Hole)\nUnits: mm\nØ 5.50 (Depth)7.0mm)\nØ 5.50 (Depth)7.0mm)\nØ 5.50 (Depth)7.0mm)\n140\n143.50\n187\n210\n70\n22\n35\n80\nM6 Thread, Thread Depth ) 9.0mm\n125\n160](.titan-al-50-1z299-1010-11/7cd89e154b02c9890719597fa284f81587aa64f1bc56d2e59c2dc162e2bc48da.jpg)

# Securing the base to the mounting surface

1. Locate the mounting plate and peel the backing from the adhesive on the bottom. Align the 3 three positioning pins with the holes in the mounting surface and attach the plate with the adhesive side facing down.

![Base\nRubber Seal\nMounting Plate\nAdhesive\nScrews (10)\nPositioning Holes (3)](.titan-al-50-1z299-1010-11/1b7993c5323b2f852bb7155b090a4679dc6bfd3cc521ec98968e1e1bcee62817.jpg)

2. Insert the rubber seal into the bottom of base of the pipe mount bracket with the grooved side facing downwards. Feed the cables from the base of the pipe mount base through the cut-out hole in the mounting surface.

![Base\nRubber Seal\nMounting Plate\nGroove\nAdhesive](.titan-al-50-1z299-1010-11/9e4b3554d294a547e0094372ba91fafd48fd53b54c34419c715b0895c31eb262.jpg)

![This image displays a simple icon featuring a white document or piece of paper with a folded top-right corner. Faint horizontal lines run across the paper, suggesting text. Overlaid on top of the document is a large, thick red checkmark.](.titan-al-50-1z299-1010-11/273f9d97b9465e63d2857a35035353556ae7d537f88407984dc400b531dc6ee3.jpg)
NOTE:

Make sure to insert the rubber seal into the bottom of the base of the pipe mount bracket with the grooved side facing downwards.

3. Place the base and rubber seal onto the mounting plate attached to the mounting surface. Secure the bracket to the mounting surface with the 10 M6 waterproof screws provided.

4. Use a T30 screwdriver to tighten the screws in the order indicated in the diagram below. It is recommended to tighten the screws to 50 kgf-cm.

![Technical diagram showing numbered components mounted on a platform with alignment lines and structural supports](.titan-al-50-1z299-1010-11/147ad040eebecb93997f8388497dc504d9753bf60e438492d96a307064b47745.jpg)

# 3.2 Powering Up

# 3.2.1 Connect the AC Power Supply

Connect the AC power supply to the power input of your model. Refer to Section 2.2 I/O Connectors - VESA Mount Version for the location of the connector on the VESA mount version, and Figure 3-3 below for the Pipe Mount version. The device will power up when the power supply is turned on.

![Technical line drawing of an electrical enclosure with mounting flanges and a red arrow pointing to the internal component (no text or symbols)](.titan-al-50-1z299-1010-11/96b319ca31dd9d235cd6c8c56f10c8ea598b0c68cece9668364b129a1cb2d50a.jpg)

Figure 3-3: AC Connector on Pipe Mount Version

# 3.2.2 Power Button

The power button is located on the side of the chassis as shown in Section 2.2 Mechanical Drawings. To power down the device, perform a soft shutdown using the operating system. Press the power button to power up the device. To perform a hard shutdown, hold down the power button for several seconds until the device powers down.

# 3.3 Driver Installation

After installing the operating system, all related drivers must be installed for the system to function properly. This section describes the drivers needed for Windows operating systems and the procedures to install them. For other OS support, please contact ADLINK for further information.

Download the drivers from the ADLINK website at: www.adlinktech.com/Products/Panel PCs Monitors/IndustrialPanelComputers/Titan-AL

Install the Windows 10 IoT Enterprise operating system before installing any drivers. Most standard I/O device drivers are included in the Windows OS. Please note that you will need Administrator privilege to install the drivers.

Install the drivers in the following order:

1. Chipset driver
2. Graphics driver
3. Ethernet driver
4. Serial I/O driver
5. Audio I/O driver (Pipe version only)
6. TXE driver

# Chipset Driver

To install the chipset driver:

1. Close any running applications.
2. From ADLINK's website, download and extract the contents of the file Titan-AL\_Win10 64bit\_Chipset.
3. Execute SetupChipset.exe and follow onscreen instructions to complete the setup.
4. After installation is complete, reboot the system.

# Graphics Driver

To install the graphics driver:

1. Close any running applications.
2. From ADLINK's website, download and extract the contents of the file Titan-AL\_Win10 64bit\_Graphics.
3. Execute igxpin.exe and follow onscreen instructions to complete the setup.
4. After installation is complete, reboot the system.

# Ethernet Driver

To install the Ethernet controller driver:

1. Close any running applications.
2. From ADLINK's website, download and extract the contents of the file Titan-AL\_Win10 64bit\_Ethernet.
3. Execute LAN-PROWinx64 22.9.exe and follow onscreen instructions to complete the setup.
4. After installation is complete, reboot the system.

# Serial I/O Driver

To install the serial I/O controller driver:

1. Close any running applications.
2. From ADLINK's website, download and extract the contents of the file Titan-AL\_Win10 64bit\_Serial.
3. Execute SetupSerialIO.exe and follow onscreen instructions to complete the setup.
4. After installation is complete, reboot the system.

# Audio Driver (Pipe Version only)

To install the audio driver:

1. Close any running applications.
2. From ADLINK's website, download and extract the contents of the file Titan-AL\_Win10 64bit\_Audio.
3. Execute Setup.exe and follow onscreen instructions to complete the setup.

# TXE Driver

To install the serial I/O controller driver:

1. Close any running applications.
2. From ADLINK's website, download and extract the contents of the file Titan-AL\_Win10 64bit\_TXE.
3. Execute SetupTXE.exe and follow onscreen instructions to complete the setup.

# 3.4 SEMA Utility

The Titan-AL supports ADLINK Smart Embedded Management Utility with features as follows.

▶ System Health for real time CPU, system temperature, total/current uptime
▶ Watchdog Timer
▶ Hardware Monitoring for input voltage levels and current power consumption

For more information and operating instructions, please visit https://www.adlinktech.com/Products/Industrial\_IoT\_and\_Cloud\_solutions/SEMA\_Smart\_Embedded\_Management\_Agent/SEMA

# 4 Interfaces

# 4.1 Pin Definitions - VESA Mount Version

Refer to Section 2.3 I/O Connectors - VESA Mount Version for connector location information.

# 4.1.1 AC Power Input (M12)

![PE\n1\n3\n2](.titan-al-50-1z299-1010-11/8ad9307f4ff220bca125fffa2a5826a8b0194edc6056e81946136794f0509702.jpg)

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>PE</td><td>Protective Earth</td></tr><tr><td>1</td><td>Line (L)</td></tr><tr><td>2</td><td>NC</td></tr><tr><td>3</td><td>Neutral (N)</td></tr></table>

Table 4-1: AC Power Input Pin Definition (M12)

# 4.1.2 COM Port (M12)

COM1/2 ports support RS-232 (default) and RS-422/RS-485 modes, by BIOS setting.

![2\n3 12 11\n4 13 17 16 10\n5 14 15 9\n6 7 8](.titan-al-50-1z299-1010-11/7931516deeca8bb1b3218de42488301a683ebff4c0a38b4a471ec09b4dee1f4d.jpg)

<table><tr><td rowspan="2">Pin</td><td colspan="3">Signal</td></tr><tr><td>RS-232</td><td>RS-422</td><td>RS-485</td></tr><tr><td>1</td><td>DCD#</td><td>TXD422-</td><td>485-</td></tr><tr><td>2</td><td>RXD</td><td>TXD422+</td><td>485+</td></tr><tr><td>3</td><td>TXD</td><td>RXD422+</td><td>N/C</td></tr><tr><td>4</td><td>DTR#</td><td>RXD422-</td><td>N/C</td></tr><tr><td>5</td><td>GND</td><td>N/C</td><td>N/C</td></tr><tr><td>6</td><td>DSR#</td><td>N/C</td><td>N/C</td></tr><tr><td>7</td><td>RTS#</td><td>N/C</td><td>N/C</td></tr><tr><td>8</td><td>CTS#</td><td>N/C</td><td>N/C</td></tr><tr><td>9</td><td>RI#</td><td>N/C</td><td>N/C</td></tr><tr><td>10</td><td>CH_GND</td><td>CH_GND</td><td>CH_GND</td></tr></table>

Table 4-2: COM Ports Pin Definition (M12)

# 4.1.3 USB 2.0 Ports (M12)

![Technical diagram of a circular connector with numbered pins arranged in concentric rings](.titan-al-50-1z299-1010-11/e83064cd77206fe6cbc7194154e5beb3a6bedc31069ac23536469f5469e9906e.jpg)

<table><tr><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>P5V</td></tr><tr><td>2</td><td>USB1_N</td></tr><tr><td>3</td><td>USB1_P</td></tr><tr><td>4</td><td>GND</td></tr><tr><td>5</td><td>P5V</td></tr><tr><td>6</td><td>USB2_N</td></tr><tr><td>7</td><td>USB2_P</td></tr><tr><td>8</td><td>GND</td></tr><tr><td>9-17</td><td>N/C</td></tr></table>

Table 4-3: USB 2.0 Port Pin Definition (M12)

# 4.1.4 GbE Ports (M12)

![Top-down technical drawing of a circular mechanical component with numbered pins (no text or symbols)](.titan-al-50-1z299-1010-11/a7222420a909d7eaaf7beed0ca8bda07ffdadddd61e1fababb9621eb80c92e64.jpg)

<table><tr><td>Pin</td><td>10BASE-T/100BASE-TX</td><td>1000BASE-T</td></tr><tr><td>1</td><td>TX+</td><td>TX0+</td></tr><tr><td>2</td><td>TX-</td><td>TX0-</td></tr><tr><td>3</td><td>RX+</td><td>TX1+</td></tr><tr><td>4</td><td>—</td><td>TX2+</td></tr><tr><td>5</td><td>—</td><td>TX2-</td></tr><tr><td>6</td><td>RX-</td><td>TX1-</td></tr><tr><td>7</td><td>—</td><td>TX3+</td></tr><tr><td>8</td><td>—</td><td>TX3-</td></tr></table>

Table 4-4: GbE Port Pin Definition (M12)

# 4.2 Pin Definitions - Pipe Mount Version

Refer to Section 2.4 I/O Connectors - Pipe Mount Version for connector location information.

# 4.2.1 COM Ports (DB-9)

COM1/2 ports support RS-232 (default) and RS-422/RS-485 modes, by BIOS setting.

![1\n5\n6\n9](.titan-al-50-1z299-1010-11/62cb9f16aab76e33cd62bedb9cf05e31bb001d97324489e23a4dee1831c2952f.jpg)

<table><tr><td rowspan="2">Pin</td><td colspan="3">Signal</td></tr><tr><td>RS-232</td><td>RS-422</td><td>RS-485</td></tr><tr><td>1</td><td>DCD#</td><td>TXD422-</td><td>485-</td></tr><tr><td>2</td><td>RXD</td><td>TXD422+</td><td>485+</td></tr><tr><td>3</td><td>TXD</td><td>RXD422+</td><td>N/C</td></tr><tr><td>4</td><td>DTR#</td><td>RXD422-</td><td>N/C</td></tr><tr><td>5</td><td>GND</td><td>N/C</td><td>N/C</td></tr><tr><td>6</td><td>DSR#</td><td>N/C</td><td>N/C</td></tr><tr><td>7</td><td>RTS#</td><td>N/C</td><td>N/C</td></tr><tr><td>8</td><td>CTS#</td><td>N/C</td><td>N/C</td></tr><tr><td>9</td><td>RI#</td><td>N/C</td><td>N/C</td></tr></table>

Table 4-5: COM Port Pin Definition (DB-9)

# 4.2.2 USB Ports

USB 2.0 (Type A)

<table><tr><td>Pin #</td><td>Signal Name</td></tr><tr><td>1</td><td>USB2.0_VBUS</td></tr><tr><td>2</td><td>D-</td></tr><tr><td>3</td><td>D+</td></tr><tr><td>4</td><td>GND</td></tr></table>

![4\n3\n2\n1](.titan-al-50-1z299-1010-11/b4a0d969c186e7ef5df4a2ded62ff388259a367d81ef853c10f95d48d18ff39e.jpg)

Table 4-6: USB 2.0 Pin Definition (Type A)

USB 3.0 (Type A)

<table><tr><td>Pin #</td><td>Signal Name</td></tr><tr><td>1</td><td>USB3.0_VBUS</td></tr><tr><td>2</td><td>D-</td></tr><tr><td>3</td><td>D+</td></tr><tr><td>4</td><td>GND</td></tr><tr><td>5</td><td>SSRX-</td></tr><tr><td>6</td><td>SSRX+</td></tr><tr><td>7</td><td>GND</td></tr><tr><td>8</td><td>SSTX-</td></tr><tr><td>9</td><td>SSTX+</td></tr></table>

![1\n2\n3\n4\n5\n6\n7\n8\n9](.titan-al-50-1z299-1010-11/ba2fbfb8fe00108ed0c4512c5828bcb538275f2514b50559c9fa7c3ad4449a94.jpg)

Table 4-7: USB 3.0 Pin Definition (Type A)

# 4.2.3 GbE Ports (RJ-45)

<table><tr><td>Pin #</td><td>10BASE-T/100BASE-TX</td><td>1000BASE-T</td></tr><tr><td>1</td><td>TX+</td><td>TX0+</td></tr><tr><td>2</td><td>TX-</td><td>TX0-</td></tr><tr><td>3</td><td>RX+</td><td>TX1+</td></tr><tr><td>4</td><td>—</td><td>TX2+</td></tr><tr><td>5</td><td>—</td><td>TX2-</td></tr><tr><td>6</td><td>RX-</td><td>TX1-</td></tr><tr><td>7</td><td>—</td><td>TX3+</td></tr><tr><td>8</td><td>—</td><td>TX3-</td></tr></table>

Table 4-8: RJ-45 GbE Pin Definition (RJ-45)

![Speed\nActivity\n8\n1](.titan-al-50-1z299-1010-11/3091a772f38e86c86232231c16316600cc2c41291b894085ceaa940d90c3cdb0.jpg)

<table><tr><td>LED</td><td>LED Color</td><td>Status</td><td>Description</td></tr><tr><td rowspan="3">Speed(left)</td><td rowspan="3">Green/Yellow</td><td>OFF</td><td>10 Mbps</td></tr><tr><td>Green</td><td>100 Mbps</td></tr><tr><td>Yellow</td><td>1 GBbps</td></tr><tr><td rowspan="3">Active/Link(right)</td><td rowspan="3">Green</td><td>OFF</td><td>Ethernet port is disconnected</td></tr><tr><td>ON</td><td>Ethernet port is connected with no activity</td></tr><tr><td>Flashing</td><td>Ethernet port is connected and active</td></tr></table>

Table 4-9: GbE Port LED Definition

# 4.2.4 DisplayPort

One DisplayPort connector supports the DP++ standard specification, and can connect to VGA, DVI, HDMI, and Display Port monitors via DisplayPort to VGA adapter cable, DisplayPort to DVI adapter cable, or DisplayPort to HDMI adapter cable and Display Port cable, with DP1.2 support for resolutions up to 4096 x 2160 at 60Hz.

![19\n1\n20\n2](.titan-al-50-1z299-1010-11/165fad304c7b3d9ab2ecf0529cc7f95814bff104043b0cb7dfca1ee0336068bd.jpg)

<table><tr><td>Pin</td><td>Signal</td><td>Pin</td><td>Signal</td></tr><tr><td>1</td><td>ML_Lane0_P</td><td>11</td><td>GND</td></tr><tr><td>2</td><td>GND</td><td>12</td><td>ML_Lane3_N</td></tr><tr><td>3</td><td>ML_Lane0_N</td><td>13</td><td>Config1</td></tr><tr><td>4</td><td>ML_Lane1_P</td><td>14</td><td>Config2</td></tr><tr><td>5</td><td>GND</td><td>15</td><td>Aux_P</td></tr><tr><td>6</td><td>ML_Lane1_N</td><td>16</td><td>GND</td></tr><tr><td>7</td><td>ML_Lane2_P</td><td>17</td><td>Aux_N</td></tr><tr><td>8</td><td>GND</td><td>18</td><td>Hot Plug</td></tr><tr><td>9</td><td>ML_Lane2_N</td><td>19</td><td>Return</td></tr><tr><td>10</td><td>ML_Lane3_P</td><td>20</td><td>DP_PWR_+3.3V</td></tr></table>

Table 4-10: DisplayPort Pin Definition

# 5 BIOS Setup

The Basic Input/Output System (BIOS) is a program that provides a basic level of communication between the processor and peripherals. In addition, the BIOS also contains codes for various advanced features applied to the Titan-AL. The BIOS setup program includes menus for configuring settings and enabling features of the Titan-AL. Most users do not need to use the BIOS setup program, as the Titan-AL ships with default settings that work well for most configurations.

![The image displays a warning sign featuring a red triangle with a white exclamation point in the center. Below the triangle is the text 'WARNING:' in black capital letters.](.titan-al-50-1z299-1010-11/eb41f3848740b72c30588fe10795f0ec8b224a8f4c0ba827fffba6ab4e4fa546.jpg)

Changing BIOS settings may lead to incorrect controller behavior and possible inability to boot.

La modification des paramètres du BIOS peut entraîner un comportement incorrect du contrôleur et une impossibilité éventuelle de démarrer.

# 5.1 Main

Contains basic system information for the rugged panel computer.

<table><tr><td colspan="3">Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Main Advanced Chipset Security Boot Save &amp; Exit</td></tr><tr><td>BIOS Information</td><td></td><td>Board Information</td></tr><tr><td>BIOS Vendor</td><td>American Megatrends</td><td></td></tr><tr><td>BIOS Version</td><td>1.04.10</td><td></td></tr><tr><td>Build Date</td><td>06/14/2019</td><td></td></tr><tr><td>MRC Version</td><td>0.56</td><td></td></tr><tr><td>GOP Version</td><td>10.0.1036</td><td></td></tr><tr><td>TXE FW Version</td><td>3.1.55.2269</td><td></td></tr><tr><td>BIOS Boot Source</td><td>Primary BIOS</td><td></td></tr><tr><td>System Information</td><td></td><td></td></tr><tr><td>Project Name</td><td>Titan-AL</td><td>←: Select Screen
↑↓: Select Item</td></tr><tr><td>CPU Board version</td><td>A2</td><td>Enter: Select
+/-: Change Opt.</td></tr><tr><td>CPU Brand String</td><td>Intel(R) Atom(TM) Proce
ssor E3950 @ 1.60GHz</td><td></td></tr><tr><td>CPU Frequency</td><td>1.60GHz</td><td>F1: General Help</td></tr><tr><td>Total Memory</td><td>4096 MB(DDR3L)</td><td>F8: Previous Values</td></tr><tr><td>Memory Frequency</td><td>1600 MHz</td><td>F9: Optimized Defaults</td></tr><tr><td>SOC SKU</td><td>D0</td><td>F10: Save &amp; Exit
ESC: Exit</td></tr></table>

# BIOS Information

Shows vendor, version, build date, MRC Version, GOP Version, and TXE FW Version for active BIOS.

# System Information

Shows current system project name, hardware version, CPU brand string, CPU frequency, total memory, memory frequency and PCH SKU.

# System Time/System Date

Allows adjustment of system time and date, as follows:

1. Highlight System Time or System Date using the up and down keys
2. Enter new values using the keyboard and &lt;Tab&gt; to move between fields

![The image displays a white document icon featuring faint horizontal lines, resembling a list or form. A large, bold red checkmark is superimposed over the document, slanting upwards from the bottom left to the top right.](.titan-al-50-1z299-1010-11/d46e2086d2209065df4cd9db745d6edf2bbaf5e296cec18e769d6bbc18d06e33.jpg)
NOTE:

The time is in 24-hour format, for example, 5:30 A.M. appears as 05:30:00, and 5:30 P.M. as 17:30:00.

# Access Level

Displays the current access level for BIOS setup.

# 5.1.1 Board Information

Displays serial number, manufacturing date, last repair date, and MAC address for the installed board.

# Runtime Statistics

Displays total runtime, current runtime, power cycles, boot cycles, and boot reason for the system.

<table><tr><td colspan="2">Main</td></tr><tr><td>Board InformationSerial Number HB74EA1001Manufacturing Date 2018/03/13Last Repair Date 0000/00/00MAC ID 0030641D03D6</td><td rowspan="2"></td></tr><tr><td rowspan="2">Runtime StatisticsTotal Runtime 167h 02mCurrent Runtime 6h 31m 29sPower Cycles 2057Boot Cycles 2100Boot Reason Power-loss</td></tr><tr><td>+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF8: Previous ValuesF9: Optimized DefaultsF10: Save &amp; ExitESC: Exit</td></tr></table>

# 5.2 Advanced

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.</td></tr><tr><td colspan="2">Main Advanced Chipset Security Boot Save &amp; Exit</td></tr><tr><td>CPU Configuration
Graphics Configuration
Power Management
System Management
Thermal Management
Watchdog Timer
Super IO Configuration
Serial Console Redirection
Network Stack Configuration
Trusted Computing
USB Configuration
Intel(R) I211 Gigabit Network Connection - 00:30:64:1D:...
Intel(R) I211 Gigabit Network Connection - 00:30:64:1D:...</td><td>CPU Configuration Parameters</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.</td></tr></table>

This menu accesses advanced options for the device.

![The image displays a yellow triangular warning sign with a black border. Centered within the triangle is a black exclamation point. Below the triangle, the word 'CAUTION:' is printed in black, capital letters.](.titan-al-50-1z299-1010-11/93f61be1fea80231575ff69bcf179e32c2e4872e258687e05fc157b9d38797ca.jpg)

Setting incorrect or conflicting values in Advanced BIOS Setup may cause system malfunction.

Le réglage de valeurs incorrectes ou conflictuelles dans la configuration avancée du BIOS peut entraîner un dysfonctionnement du système.

# 5.2.1 CPU Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc. Advanced</td></tr><tr><td>Intel(R) Atom(TM) Processor E3930 @ 1.30GHzCPU Signature 506CAMicrocode Patch 8Max CPU Speed 1300 MHzMin CPU Speed 800 MHzProcessor Cores 2Intel HT Technology Not SupportedIntel VT-x Technology SupportedL1 Data Cache 24 kB x 2L1 Code Cache 32 kB x 2L2 Cache 1024 kB x 2L3 Cache Not PresentEIST [Enabled]Turbo Mode [Enabled]Intel Virtualization Technology [Enabled]C-States [Enabled]Enhanced C-states [Enabled]Max Package C State [PC2]Max Core C State [Core C6]C-State Auto Demotion [C1]C-State Un-demotion [C1]DTS [Enabled]</td><td>Enhanced Intel® Speedstep technology allows the processor to dynamically adjust frequency and voltage based on power versus performance needs.++: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF8: Previous ValuesF9: Optimized DefaultsF10: Save &amp; ExitESC: Exit</td></tr><tr><td colspan="2">Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.</td></tr></table>

# EIST

Enables/disables Intel SpeedStep.

# Turbo Mode

Enables/disables Turbo mode.

# Intel Virtualization Technology

When enabled, VMM can utilize the additional hardware capabilities provided by Vanderpool Technology.

# C-States

# Enhanced C-state

Enables/disables C1E, where, when enabled, CPU will switch to minimum speed when all cores enter CStates.

# Max Package C State

Sets the Max Package C State supported by the processor, from among PC2, PC1, and C0.

# Max Core C State

Sets the Max Core C State supported by the cores, from among Fused value, Core C10, Core C9, and Core C8,

# C-State Auto Demotion

Configures C-State Auto Demotion.

# C-State Un-demotion

Configures C-State Auto Un-demotion.

# DTS

Enables/disables Digital Thermal Sensor.

# 5.2.2 Graphics Configuration

Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Advanced

Graphics Configuration

For LVDS Only

Data format and Color [Auto]

LVDS Output Mode [Auto]

DE Polarity [Active High]

Vsync Polarity [Active High]

Hsync Polarity [Active High]

Spreading depth [No Spreading]

For eDP/LVDS

Active LFP Config [eDP/LVDS]

Data format and Color Depth select

→←: Select Screen

↑↓: Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F8: Previous Values

F9: Optimized Defaults

F10: Save & Exit

ESC: Exit

Version 2.18.1263. Copyright (C) 2019 American Megatrends, Inc.

# Data Formation and Color Depth

Selects data format and color depth, from among Auto, VESA 24 bpp, JEIDA 24 bpp, and JEIDA/vesa 18 bpp

# LVDS Output Mode

Selects single/dual mode

# DE Polarity

Selects active High/Active Low DE polarity

# Vsync Polarity

Selects Active High/Active Low Vsync polarity

# Hsync Polarity

Selects Active High/Active Low Hsync polarity

# Spreading Depth

Selects clock frequency center spreading depth

# Active LFP Config

Configures active local flat panel

![Active LFP Config\nNo LFP\neDP/LVDS](.titan-al-50-1z299-1010-11/92d79d8391bc673283bfae73ac2fd5daffdc11790917c585cdd875cf2ec70076.jpg)

# 5.2.3 Power Management

<table><tr><td colspan="3">Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc. Advanced</td></tr><tr><td colspan="2">Power Management</td><td rowspan="8">Enables or Disables BIOS ACPI Auto Configuration.</td></tr><tr><td>Enable ACPI Auto Configuration</td><td>[Disabled]</td></tr><tr><td>Enable Hibernation</td><td>[Enabled]</td></tr><tr><td>ACPI Sleep State</td><td>[S3 (Suspend to RAM)]</td></tr><tr><td>Lock Legacy Resources</td><td>[Disabled]</td></tr><tr><td>mPCIe Slot Wake</td><td>[Enabled]</td></tr><tr><td>LAN Wake</td><td>[Enabled]</td></tr><tr><td>RTC Wake system from S5</td><td>[Disabled]</td></tr><tr><td>Emulation AT/ATX</td><td>[ATX]</td><td rowspan="4">+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF8: Previous ValuesF9: Optimized DefaultsF10: Save &amp; ExitESC: Exit</td></tr><tr><td>LAN#1 Control</td><td>[Enabled]</td></tr><tr><td>LAN#2 Control</td><td>[Enabled]</td></tr><tr><td colspan="2">Power Consumption</td></tr><tr><td colspan="3">Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.</td></tr></table>

# Enable ACPI Auto Configuration

Enables/disables BIOS ACPI Auto Configuration.

# Enable Hibernation

Enables/disables hibernation (OS/S4 Sleep State), incompatible with some OS.

# ACPI Sleep State

Selects the highest ACPI sleep state the system will enter when SUSPEND is entered.

# Lock Legacy Resources

Enables/disables Legacy Resources.

# mPCIe Slot Wake

Enables/disables PCI Express slot wake capability.

# LAN Wake

Enables/disables onboard LAN wake capability.

# RTC Wake system from S5

Enables/disables system wake on alarm event, from among

▶ Fixed Time: system wakes on the hr::min::sec specified
▶ Dynamic Time: system wakes on the current time + increase in minutes

# Emulation AT/ATX

Selects Emulation AT or ATX function, where, if set to [Emulation AT], BIOS will report no suspend functions to ACPI OS, and in windows XP, OS displays shutdown message during system shutdown.

# LAN#1 Control

Enables/disables LAN#1 device.

# LAN#2 Control

Enables/disables LAN#2 device.

# Power Consumption

# Power consumption information

<table><tr><td>Power Consumption</td><td></td></tr><tr><td>Current Input Current 0.470A</td><td></td></tr><tr><td>Current Input Power 5.680W</td><td></td></tr><tr><td>CPU-Vcore 0.825V</td><td></td></tr><tr><td>VGFX 0.809V</td><td></td></tr><tr><td>V1P05S 1.051V</td><td></td></tr><tr><td>VMEM 1.358V</td><td></td></tr><tr><td>VIN(12V) 11.941V</td><td></td></tr><tr><td>V5SBY 5.036V</td><td></td></tr><tr><td>V5S 5.059V</td><td></td></tr><tr><td>P_+3V3_A 3.324V</td><td></td></tr><tr><td>P_+3V3_S 3.300V</td><td rowspan="4">+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF8: Previous ValuesF9: Optimized DefaultsF10: Save &amp; ExitESC: Exit</td></tr><tr><td>VRTC 3.045V</td></tr><tr><td>P_+1V24_S 1.264V</td></tr><tr><td>P_+1V8_S 1.787V</td></tr></table>

# 5.2.4 System Management

<table><tr><td>System Management
Version: 1.00
SEMA Firmware
Build Date
SEMA Bootloader
Build Date</td><td>BMC SP-AL 0v6
Jan 26 2018
b1_SP-AL 5v1
Jan 4 2018</td><td>Refer to SEMA user manual for detail operation.</td></tr><tr><td>▶ SEMA Features
▶ Flags</td><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr></table>

Displays BMC and SEMA version and build date.

# SEMA Features

Refer to SEMA documentation for detailed operation

# Flags

Displays BMC flag

# 5.2.5 Thermal Management

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc. Advanced</td></tr><tr><td>TemperaturesCPU TemperatureCurrent 47CBoard TemperaturesCurrent 39CStartup 33CMin 23CMax 41CBoard2 TemperaturesCurrent -127CStartup -127CMin -1CMax -1CCritical Trip Point [Disabled]Passive Cooling Trip Point [Disabled]</td><td>This value is the temperature threshold of the Critical Trip Point.++: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF8: Previous ValuesF9: Optimized DefaultsF10: Save &amp; ExitESC: Exit</td></tr></table>

Displays CPU and board temperatures.

# Critical Trip Point

Temperature threshold of critical trip point.

# Passive Cooling Trip Point

Temperature threshold of passive cooling trip point.

# 5.2.6 Watchdog Timer

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc. Advanced</td></tr><tr><td rowspan="2">Watchdog TimerPower-Up Watchdog [Disabled]ATTENTION: Pressing F12 during start up disables the Power Up Watchdog.RunTime Watchdog [Disabled]</td><td>The Power Up Watchdog resets the system after a certain amount of time after power up.Pressing F12 during start up disables the Power Up Watchdog.</td></tr><tr><td>+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF8: Previous ValuesF9: Optimized DefaultsF10: Save &amp; ExitESC: Exit</td></tr></table>

# Power-Up Watchdog

Enables/disables Power Up watchdog, which, when enabled, resets the system a certain amount of time after power up. Pressing F12 during startup disables the power up watchdog.

# RunTime Watchdog

Enables/disables RunTime watchdog, which, when enabled, resets the system a certain amount of time after power up.

# 5.2.7 Super IO Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Advanced</td></tr><tr><td>Super IO Chip NCT5104D
► Serial Port 1 Configuration
► Serial Port 2 Configuration</td><td>Set Parameters of Serial Port 1 (COM1)</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.</td></tr></table>

Enables/disables the serial port and sets the serial port mode to RS-232, RS-422 or RS-485.

# 5.2.8 Serial Console Redirection

![Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.\nAdvanced\nCOM1\nConsole Redirection (Disabled)\n► Console Redirection Settings\nCOM2\nConsole Redirection (Disabled)\n► Console Redirection Settings\nConsole Redirection Enable or\nDisable.\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.18.1263, Copyright (C) 2018 American Megatrends, Inc.](.titan-al-50-1z299-1010-11/5096ff155ddc4d74827dff087f78d80b225f9b973d501938e2be6183515e11db.jpg)

Enables/disables serial port console redirection.

# 5.2.9 Network Stack Configuration

![Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.\nAdvanced\nNetwork Stack Configuration\nNetwork Stack (Disabled)\nEnable/Disable UEFI Network Stack\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.](.titan-al-50-1z299-1010-11/f7b1e60b9c67e5876d2f8e688c7448c7e984db373b2d3141959e4c7d9cce2a9d.jpg)

Enables/disables UEFI network stack.

# 5.2.10 Trusted Computing

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc. Advanced</td></tr><tr><td rowspan="2">ConfigurationSecurity Device Support [Disable]NO Security Device Found</td><td>Enables or Disables BIOS support for security device.O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available.</td></tr><tr><td>+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF8: Previous ValuesF9: Optimized DefaultsF10: Save &amp; ExitESC: Exit</td></tr></table>

Enables/disables BIOS support for security device, when disabled, OS will not show the security device, and TCG EFI protocol and INT1A interface will not be available.

# 5.2.11 USB Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc. Advanced</td></tr><tr><td>USB ConfigurationXHCI Hand-off [Enabled]USB Mass Storage Driver Support [Enabled]USB hardware delays and time-outs:USB transfer time-out [20 sec]Device reset time-out [20 sec]Device power-up delay [Auto]</td><td>This is a workaround for OSes without XHCI hand-off support.The XHCI ownership change should be claimed by XHCI driver.++: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF8: Previous ValuesF9: Optimized DefaultsF10: Save &amp; ExitESC: Exit</td></tr><tr><td colspan="2">Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.</td></tr></table>

# XHCI Hand-off

Enables/disables XHCI hand-off, as a workaround for OS with no XHCI hand-off support, where XHCI ownership change should be claimed by XHCI driver.

# USB Mass Storage Driver Support

Enables/disables mass storage driver support.

# USB transfer time-out

Time-out value for control, bulk, and interrupt transfers.

# Device reset time-out

USB mass storage device Start Unit command time-out.

# Device power-up delay

Maximum time the device will take before properly reporting itself to the Hot Controller, with 'Auto' using default value, for a Root port 100 ms, and for a Hub port the delay is taken from the Hub descriptor.

# 5.2.12 Intel I211 Gigabit Network Connection

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Advanced</td></tr><tr><td rowspan="2">PORT CONFIGURATION MENU
▶ NIC Configuration
Blink LEDs 0
PORT CONFIGURATION INFORMATION
UEFI Driver: Intel(R) PRO/1000 6.1...
Adapter PBA:
Chip Type Intel i211
PCI Device ID 1539
PCI Address 02:00:00
Link Status [Disconnected]
MAC Address 00:30:64:1D:03:D6</td><td>Click to configure the network device port.</td></tr><tr><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.</td></tr></table>

# NIC Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc. Advanced</td></tr><tr><td rowspan="4">Link Speed Wake On LAN</td><td rowspan="4">[Auto Negotiated] [Enabled]</td></tr><tr></tr><tr></tr><tr></tr></table>

# Link Speed

Specifies the port speed used for the selected boot protocol.

# Wake On Lan

Enables the server to be powered on using an in-band magic packet.

# Blink LEDs

Identifies the physical network port by blinking the associated LED.

# 5.3 Chipset

![Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.\nMain Advanced Chipset Security Boot Save & Exit\nNorth Bridge\nSouth Bridge\nUncore Configuration\nSouth Cluster Configuration\nNorth Bridge Parameters\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.](.titan-al-50-1z299-1010-11/bd47fc1ef4cc30e8526341d0e045df0d6123aa6ae5641c3e5112cd7bf81f1dda.jpg)

# 5.3.1 North Bridge

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Chipset</td></tr><tr><td>Memory Information
Total Memory 4096 MB (DDR3L)
Memory Vlotage 1.35V
Memory Slot0 4096 MB (DDR3L)
Max TOLUD [2 GB]
Above 4GB MMIO BIOS assignment [Disabled]
PCIE VGA Workaround [Disabled]</td><td>Maximum Value of TOLUD.
+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.</td></tr></table>

Displays memory information, sets maximum value for TOLUID and enables/disables BIOS assignment and PCIe VGA workaround.

# 5.3.2 South Bridge

![Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.\nChipset\nSerial IRQ Mode	(Continuous)\nSMBus Support	(Enabled)\nPCI CLOCK RUN	(Enabled)\nConfigure Serial IRQ Mode.\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.](.titan-al-50-1z299-1010-11/a203989d27ec412f59c0ce1ee68fdf6db160e25f2d5c454b3e0d210f10a1273c.jpg)

Sets IRQ mode and enables/disables SMBUs and PCI clock run.

# 5.3.3 Uncore Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Chipset</td></tr><tr><td>IGD Configuration
Integrated Graphics Device [Enable]
Primary Display [IGD]
RC6(Render Standby) [Disable]
GTT Size [8MB]
Aperture Size [256MB]
DVMT Pre-Allocated [64M]
DVMT Total Gfx Mem [256M]
Cd Clock Frequency [624 MHz]</td><td>Enable : Enable Integrated Graphics Device (IGD) when selected as the Primary Video Adaptor. Disable: Alwarys disable IGD</td></tr><tr><td></td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.</td></tr></table>

Enables/disables Integrated Graphic Device and RC6 (Render Standby), sets size for GTT, aperture size, DVMT pre-allocation, DVMT total Gfx Mem and CD clock frequency.

# 5.3.4 South Cluster Configuration

![Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.\nChipset\n► HD-Audio Configuration\n► LPSS Configuration\n► PCI Express Configuration\n► SATA Drives\n► SCC Configuration\n► USB Configuration\n► Miscellaneous Configuration\nHD-Audio Configuration Settings\n+: Select Screen\n↑↓: Select Item\nEnter: Select\n+/-: Change Opt.\nF1: General Help\nF8: Previous Values\nF9: Optimized Defaults\nF10: Save & Exit\nESC: Exit\nVersion 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.](.titan-al-50-1z299-1010-11/eb95d685f03ba158bc9f7c4cef528afe78c7be9b946b1351bccc42da334eece6.jpg)

# HD-Audio Configuration HD-Audio Support

Enables/disables HDA Audio

# Audio Output Selection

Selects audio output, from speaker out or line out.

# LPSS Configuration

Selects I2C support mode.

# PCI Express Configuration

Enables/disables PCI Express clock gating, Port8xh Decode, Peer Memory Write and Compliance mode, and configures PCI Express Root Port.

# SATA Drives

Enables/disables Chipset SATA Controller, which supports the 2 black internal SATA ports (up to 3Gb/s supported per port), and configures SATA.

# SCC Configuration

Enables/disables SCC eMMC support and selects eMMC max speed.

# USB Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc. Chipset</td></tr><tr><td rowspan="2">XHCI Pre-Boot Driver [Disable]xHCI Mode [Enable]USB VBUS [ON]USB HSIC1 Support [Disable]USB SSIC1 Support [Disable]USB Port Disable Override [Disable]XDCI Support [Disable]XHCI Disable Compliance Mode [FALSE]USB HW MODE AFE Comparators [Disable]</td><td>Enable/Disable XHCI Pre-Boot Driver support.</td></tr><tr><td>+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF8: Previous ValuesF9: Optimized DefaultsF10: Save &amp; ExitESC: Exit</td></tr></table>

# XHCI Pre-boot Driver

Enables/disables XHCI pre-boot driver support.

# XHCI Mode

Enables/disables XHCI mode.

# USB VBUS

Turns USB VBUS on/off.

# USB HIC1 Support

Enables/disables USB HIC1 support.

# USB SSIC1 Support

Enables/disables USB SSIC1 support.

# USB Port Disable Override

Enables USB disable override.

# XDCI Support

Enables/disables XDCI support.

# XHCI Disable Compliance Mode

Selects XHCI Disable Compliance Mode.

# USB HW Mode AFE Comparators

Enables/disables mode AFE comparators.

# Miscellaneous Configuration

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc. Chipset</td></tr><tr><td rowspan="2">Miscellaneous ConfigurationState After G3 [S0 State]BIOS Lock [Disabled]</td><td>Specify what state to go to when power is re-applied after a power failure (G3 state).S0 State: System will boot directly as soon as power applied.S5 State: System keeps in power-off state until power button is pressed.</td></tr><tr><td>+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF8: Previous ValuesF9: Optimized DefaultsF10: Save &amp; ExitESC: Exit</td></tr></table>

# State After G3

Specifies the state to be entered when power is re-applied after a power failure (G3 state), from S0 state, in which the system boots directly when power is applied, and S5 state, in which the system remains powered down until the power button is pressed.

# BIOS Lock

Enables/disables South Cluster BIOS Lock Enable, must be enabled to ensure SMM protection of flash.

# 5.4 Security

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.Main Advanced Chipset Security Boot Save &amp; Exit</td></tr><tr><td>Password DescriptionIf ONLY the Administrator&#x27;s password is set,then this only limits access to Setup and isonly asked for when entering Setup.If ONLY the User&#x27;s password is set, then thisis a power on password and must be entered toboot or enter Setup. In Setup the User willhave Administrator rights.The password length must bein the following range:Minimum length 3Maximum length 20Administrator PasswordUser PasswordSecure Boot menuHDD Security Configuration</td><td>Customizable Secure Bootsettings+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF8: Previous ValuesF9: Optimized DefaultsF10: Save &amp; ExitESC: Exit</td></tr></table>

Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.

If only the Administrator password is set, access is limited and password requested on Setup.

If User password is set, it acts as power-on password and must be entered to boot or enter Setup.

# Administrator Password

Sets Administrator Password.

# User Password

Sets User Password.

# Secure Boot Menu

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.</td></tr><tr><td>Security</td><td></td></tr><tr><td>Secure Boot</td><td>Secure Boot activated when Platform Key(PK) is enrolled, System mode is User/Deployed, and CSM function is disabled</td></tr><tr><td>System Mode</td><td>User</td></tr><tr><td>Secure Boot</td><td>Not Active</td></tr><tr><td>Secure Boot Control</td><td>[Disabled]</td></tr><tr><td></td><td>+: Select Screen↑↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF8: Previous ValuesF9: Optimized DefaultsF10: Save &amp; ExitESC: Exit</td></tr></table>

# Secure Boot Control

Can be enabled if running in User mode with enrolled Platform Key (PK) and CSM disabled.

# HDD Security Configuration

Configures HDD security

# 5.5 Boot

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.</td></tr><tr><td colspan="2">Main Advanced Chipset Security Boot Save &amp; Exit</td></tr><tr><td>Boot Configuration
Setup Prompt Timeout 1
Bootup NumLock State [On]
Quiet Boot [Enabled]
Fast Boot [Disable]</td><td rowspan="2">Number of seconds to wait for setup activation key.
65535(0xFFFF) means indefinite waiting.</td></tr><tr><td>Boot Configuration
Boot Option #1 [Hard Disk:Windows B...]
Boot Option #2 [CD/DVD]
Boot Option #3 [USB Hard Disk]
Boot Option #4 [USB CD/DVD]
Boot Option #5 [USB Key:UEFI: Gener...]
Boot Option #6 [USB Floppy]
Boot Option #7 [USB Lan]
Boot Option #8 [Network]</td></tr><tr><td>► UEFI Hard Disk Drive BBS Priorities
► UEFI USB Key Drive BBS Priorities</td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.</td></tr></table>

# Setup Prompt Timeout

Sets the number of seconds before the setup activation key is launched, with 65535(0xFFFF) for indefinite wait.

# Bootup Num-Lock State

Sets keypad Number Lock status following boot.

# Quiet Boot

When disabled, directs BIOS to display POST messages, and when enabled, directs BIOS to display the OEM logo.

# Fast Boot

When disabled, directs BIOS to perform all POST tests, and when enabled, directs BIOS to skip certain POST tests for faster Boot, with possibly reduced effectiveness.

# Boot Configuration

Specifies the priority of boot devices, all of which are detected during POST and displayed. Target Boot Option # and select the desired device.

# UEFI Hard Disk Drive BBS Priorities

Sets the system boot order.

# UEFI USB Key Drive BBS Priorities

Sets the system boot order.

# 5.6 Save & Exit

<table><tr><td colspan="2">Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.</td></tr><tr><td colspan="2">Main Advanced Chipset Security Boot Save &amp; Exit</td></tr><tr><td>Boot Configuration
Setup Prompt Timeout 1
Bootup NumLock State [On]
Quiet Boot [Enabled]
Fast Boot [Disable]</td><td rowspan="2">Number of seconds to wait for setup activation key.
65535(0xFFFF) means indefinite waiting.</td></tr><tr><td>Boot Configuration
Boot Option #1 [Hard Disk:Windows B...]
Boot Option #2 [CD/DVD]
Boot Option #3 [USB Hard Disk]
Boot Option #4 [USB CD/DVD]
Boot Option #5 [USB Key:UEFI: Gener...]
Boot Option #6 [USB Floppy]
Boot Option #7 [USB Lan]
Boot Option #8 [Network]</td></tr><tr><td>► UEFI Hard Disk Drive BBS Priorities
► UEFI USB Key Drive BBS Priorities</td><td>+: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F8: Previous Values
F9: Optimized Defaults
F10: Save &amp; Exit
ESC: Exit</td></tr><tr><td colspan="2">Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.</td></tr></table>

# Save Changes and Exit

Exits system setup after saving changes.

# Discard Changes and Exit

Discards all changes and exits BIOS setup.

# Save Changes and Reset

Saves all changes and reboots the system, with new settings taking effect.

# Discard Changes and Reset

Resets system setup without saving any changes.

# Save Changes

Saves changes made so far to any of the Setup options.

# Discard Changes

Discards changes made so far to any of the Setup options.

# Restore Defaults

Returns all BIOS options to default settings, maximizing system stability at less than maximum performance. Select if the computer encounters system configuration problems.

# Save as User Defaults

Saves all changes to this point as user defaults.

# Restore User Defaults

Restores user defaults to all setup options.

# Launch EFI Shell from file system device

Attempts to launch EFI Shell application (Shell.efi) from an available filesystem device.

# Setup Prompt Timeout

Sets the number of seconds before the setup activation key is launched, with 65535(0xFFFF) for indefinite wait.

This page intentionally left blank.

# Important Safety Instructions

For user safety, please read and follow all instructions, Warnings, Cautions, and Notes marked in this manual and on the associated device before handling/operating the device, to avoid injury or damage.

▶ Read these safety instructions carefully
- Keep the User’s Manual for future reference
▶ Read the Specifications section of this manual for detailed information on the recommended operating environment
The Titan-15WP/21WP/24WP-VESA/PIPE-E3950 can be operated at ambient temperatures of $45^{\circ}$ C with 100-240VAC input.
- When installing/mounting or uninstalling/removing device; or when removal of a chassis cover is required for user servicing (See “Getting Started” on page 15.):

▷ Turn off power and unplug any power cords/cables
▷ Reinstall all chassis covers before restoring power

▶ To avoid electrical shock and/or damage to device:

▷ Keep device away from water or liquid sources
▷ Keep device away from high heat or humidity
▷ Keep device properly ventilated (do not block or cover ventilation openings)
▶ Always use recommended voltage and power source settings
▶ Always install and operate device near an easily accessible electrical outlet
▷ Secure the power cord (do not place any object on/over the power cord)
▶ Only install/attach and operate device on stable surfaces and/or recommended mountings

▶ If the device will not be used for long periods of time, turn off and unplug from its power source

▶ Never attempt to repair the device, which should only be serviced by qualified technical personnel using suitable tools

▶ A Lithium-type battery may be provided for uninterrupted backup or emergency power
▶ Ensure that the device connects to a socket/outlet with ground/earth connection..

![The image displays a standard safety warning sign featuring a yellow equilateral triangle with a black border. Centered inside the triangle is a large black exclamation point. Directly beneath the triangle, the text 'CAUTION:' is printed in black, uppercase letters.](.titan-al-50-1z299-1010-11/eb37c8c7c5b2f3bdeb1d547be6966e062a6d2140352c2f746d2ff040a3a292d8.jpg)

Risk of explosion if battery is replaced with one of an incorrect type; please dispose of used batteries appropriately.

Risque d'explosion si la pile est remplacée par une autre de type incorrect. Veuillez jeter les piles usagées de façon appropriée.

▶ The device must be serviced by authorized technicians when:

▷ The power cord or plug is damaged
▷ Liquid has entered the device interior
The device has been exposed to high humidity and/or moisture
The device is not functioning or does not function according to the User's Manual
The device has been dropped and/or damaged and/or shows obvious signs of breakage

▶ Disconnect the power supply cord before loosening the thumbscrews and always fasten the thumbscrews with a screwdriver before starting the system up
It is recommended that the device be installed only in a server room or computer room where access is:

▶ Restricted to qualified service personnel or users familiar with restrictions applied to the location, reasons therefor, and any precautions required

▶ Only afforded by the use of a tool or lock and key, or other means of security, and controlled by the authority responsible for the location

# Consignes de Sécurité Importantes

S'il vous plaît prêter attention stricte à tous les avertissements et mises en garde figurant sur l'appareil, pour éviter des blessures ou des dommages. Avant de connecter le Titan-AL à une source de courant continu, veuillez vous assurer de la polarité de la tension conformément à l'entrée CC du Équipement Une tension et/ou une polarité incorrectes peuvent causer des dommages irréversibles sur le système.

▶ Lisez attentivement ces consignes de sécurité
▶ Conservez le manuel de l'utilisateur pour pouvoir le consulter ultérieurement
▶ Lisez la section Spécifications de ce manuel pour des informations détaillées sur l'environnement d'exploitation recommandé
Le Titan-15WP/21WP/24WP-VESA/PIPE-E3950 peut fonctionner à une température ambiante de 45°C avec 100-240 VAC entrée.
Lors de l'installation/montage ou de la désinstallation/suppression de l'appareil ; ou lorsque le démontage d'un couvercle de châssis est nécessaire pour l'entretien par l'utilisateur (Voir "Mise en route à la page 15").

▷ Mettez l'appareil hors tension et débranchez tous les cordons/câbles d'alimentation
Réinstallez tous les couvercles de châssis avant de rétablir l'alimentation

Pour éviter les chocs électriques et/ou d'endommager l'appareil:

▷ Tenez l'appareil à l'écart de toute source d'eau ou de liquide
▷ Tenez l'appareil à l'écart d'une forte chaleur ou d'une humidité élevée
- Maintenez l'appareil correctement ventilé (n'obstruer ou ne couvrez pas les ouvertures de ventilation)
Utilisez toujours les réglages de tension et de source d'alimentation recommandés
Installez et utilisez toujours l'appareil près d'une prise de courant facilement accessible

▷ Fixez le cordon d'alimentation (ne placez aucun objet sur le cordon d'alimentation)
Installez/fixez et utilisez l'appareil uniquement sur des surfaces stables et/ou sur les fixations recommandées
▷ L'équipement doit être connecté à une prise de courant avec mise à la terre

Si l'appareil ne doit pas être utilisé pendant de longues périodes, éteignez-le et débranchez-le de sa source d'alimentation

N'essayez jamais de réparer l'appareil, qui ne doit être réparé que par un personnel technique qualifié à l'aide d'outils appropriés

Une batterie de type Lithium peut être fournie pour une alimentation de secours ininterrompue ou d'urgence.

L'appareil doit être entretenu par des techniciens agrees lorsque:

▷ Le cordon d'alimentation ou la prise est endommagé(e)
▷ Un liquide a pénétré à l'intérieur de l'appareil
▷ L'appareil a été exposé à une forte humidité et/ou de la buée
▷ L'appareil ne fonctionne pas ou ne fonctionne pas selon le manuel de l'utilisateur
▷ L'appareil est tombé et/ou a été endommagé et/ou présente des signes évidents de dommage

Débranchez le cordon d'alimentation avant de desserrer les vis à oreilles et serrez toujours les vis à oreilles avec un tournevis avant de mettre le système en marche

Il est recommandé d'installer l'appareil uniquement dans une salle de serveurs ou une salle informatique où l'accès est:

Réservé au personnel de service qualifié ou aux utilisateurs familiarisés avec les restrictions appliquées à l'emplacement, aux raisons de ces restrictions et toutes les précautions requises

▷ Uniquement autorisé par l'utilisation d'un outil, d'une serrure et d'une clé, ou d'un autre moyen de sécurité, et contrôlé par l'autorité responsable de l'emplacement

# Getting Service

Ask an Expert: http://askanexpert.adlinktech.com

# ADLINK Technology, Inc.

9F, No.166 Jian Yi Road, Zhonghe District

New Taipei City 235, Taiwan

Tel: +886-2-8226-5877

Fax: +886-2-8226-5717

Email: service@adlinktech.com

# Ampro ADLINK Technology, Inc.

5215 Hellyer Avenue, #110

San Jose, CA 95138, USA

Tel: +1-408-360-0200

Toll Free: +1-800-966-5200 (USA only)

Fax: +1-408-360-0222

Email: info@adlinktech.com

# ADLINK Technology (China) Co., Ltd.

300 Fang Chun Rd., Zhangjiang Hi-Tech Park

Pudong New Area, Shanghai, 201203 China

Tel: +86-21-5132-8988

Fax: +86-21-5132-3588

Email: market@adlinktech.com

# ADLINK Technology GmbH

Hans-Thoma-Strasse 11

D-68163 Mannheim, Germany

Tel: +49-621-43214-0

Fax: +49-621 43214-30

Email: emea@adlinktech.com

Please visit the Contact page at www.adlinktech.com for information on how to contact the ADLINK regional office nearest you:
[🔗 Link to the original document](.titan-al-50-1z299-1010-11/titan-al-50-1z299-1010-11.pdf)